diff options
Diffstat (limited to 'arch/arm64/boot')
| -rw-r--r-- | arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi | 3 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 5 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3368.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 16 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 2 |
7 files changed, 15 insertions, 23 deletions
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi index 4220fbdcb24a..ff5c4c47b22b 100644 --- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi @@ -98,7 +98,7 @@ clock-output-names = "clk125mhz"; }; - pci { + pcie@30000000 { compatible = "pci-host-ecam-generic"; device_type = "pci"; #interrupt-cells = <1>; @@ -118,6 +118,7 @@ ranges = <0x02000000 0 0x40000000 0 0x40000000 0 0x20000000 0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>; + bus-range = <0 0xff>; interrupt-map-mask = <0 0 0 7>; interrupt-map = /* addr pin ic icaddr icintr */ diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 887b61c872dd..ab00be277c6f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -484,8 +484,8 @@ blsp2_spi5: spi@075ba000{ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x075ba000 0x600>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>, + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index d4f80786e7c2..28257724a56e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -136,11 +136,12 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmiim1_pins>; + snps,force_thresh_dma_mode; snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x26>; - rx_delay = <0x11>; + tx_delay = <0x24>; + rx_delay = <0x18>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 41d61840fb99..d70e409e2b0c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -683,7 +683,7 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; status = "disabled"; }; @@ -694,7 +694,7 @@ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; status = "disabled"; }; @@ -705,7 +705,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 1070c8264c13..2313aea0e69e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -257,7 +257,7 @@ max-frequency = <150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; resets = <&cru SRST_SDIO0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 199a5118b20d..264a6bb60c53 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -406,8 +406,9 @@ wlan_pd_n: wlan-pd-n { compatible = "regulator-fixed"; regulator-name = "wlan_pd_n"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_reset_l>; - /* Note the wlan_module_reset_l pinctrl */ enable-active-high; gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; @@ -940,12 +941,6 @@ ap_i2c_audio: &i2c8 { pinctrl-0 = < &ap_pwroff /* AP will auto-assert this when in S3 */ &clk_32k /* This pin is always 32k on gru boards */ - - /* - * We want this driven low ASAP; firmware should help us, but - * we can help ourselves too. - */ - &wlan_module_reset_l >; pcfg_output_low: pcfg-output-low { @@ -1125,12 +1120,7 @@ ap_i2c_audio: &i2c8 { }; wlan_module_reset_l: wlan-module-reset-l { - /* - * We want this driven low ASAP (As {Soon,Strongly} As - * Possible), to avoid leakage through the powered-down - * WiFi. - */ - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 0f873c897d0d..ce592a4c0c4c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -457,7 +457,7 @@ assigned-clocks = <&cru SCLK_PCIEPHY_REF>; assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; assigned-clock-rates = <100000000>; - ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn_cpm>; |