aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-vexpress
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-vexpress')
-rw-r--r--arch/arm/mach-vexpress/Kconfig1
-rw-r--r--arch/arm/mach-vexpress/Makefile7
-rw-r--r--arch/arm/mach-vexpress/dcscb.c7
-rw-r--r--arch/arm/mach-vexpress/platsmp.c2
-rw-r--r--arch/arm/mach-vexpress/tc2_pm.c7
-rw-r--r--arch/arm/mach-vexpress/tc2_pm_psci.c173
-rw-r--r--arch/arm/mach-vexpress/v2m.c28
7 files changed, 224 insertions, 1 deletions
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 4a70be485ff8..556b01d305a8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -55,6 +55,7 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
config ARCH_VEXPRESS_CA9X4
bool "Versatile Express Cortex-A9x4 tile"
+ select ARM_ERRATA_643719
config ARCH_VEXPRESS_DCSCB
bool "Dual Cluster System Control Block (DCSCB) support"
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 0997e0b7494c..191f2b591adc 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -8,8 +8,15 @@ obj-y := v2m.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o
CFLAGS_dcscb.o += -march=armv7-a
+CFLAGS_REMOVE_dcscb.o = -pg
obj-$(CONFIG_ARCH_VEXPRESS_SPC) += spc.o
+CFLAGS_REMOVE_spc.o = -pg
obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o
CFLAGS_tc2_pm.o += -march=armv7-a
+CFLAGS_REMOVE_tc2_pm.o = -pg
+ifeq ($(CONFIG_ARCH_VEXPRESS_TC2_PM),y)
+obj-$(CONFIG_ARM_PSCI) += tc2_pm_psci.o
+CFLAGS_REMOVE_tc2_pm_psci.o = -pg
+endif
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
index 14d499688736..b35700f8e01f 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -23,6 +23,7 @@
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/cp15.h>
+#include <asm/psci.h>
#define RST_HOLD0 0x0
@@ -193,6 +194,12 @@ static int __init dcscb_init(void)
unsigned int cfg;
int ret;
+ ret = psci_probe();
+ if (!ret) {
+ pr_debug("psci found. Aborting native init\n");
+ return -ENODEV;
+ }
+
if (!cci_probed())
return -ENODEV;
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 993c9ae5dc5e..b4a5f0d8390d 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -53,7 +53,7 @@ static int __init vexpress_dt_find_scu(unsigned long node,
{
if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) {
phys_addr_t phys_addr;
- __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL);
+ const __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL);
if (WARN_ON(!reg))
return -EINVAL;
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 29e7785a54bc..a32a179080d5 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -27,6 +27,7 @@
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/cp15.h>
+#include <asm/psci.h>
#include <linux/arm-cci.h>
@@ -329,6 +330,12 @@ static int __init tc2_pm_init(void)
u32 a15_cluster_id, a7_cluster_id, sys_info;
struct device_node *np;
+ ret = psci_probe();
+ if (!ret) {
+ pr_debug("psci found. Aborting native init\n");
+ return -ENODEV;
+ }
+
/*
* The power management-related features are hidden behind
* SCC registers. We need to extract runtime information like
diff --git a/arch/arm/mach-vexpress/tc2_pm_psci.c b/arch/arm/mach-vexpress/tc2_pm_psci.c
new file mode 100644
index 000000000000..7cb2148caebc
--- /dev/null
+++ b/arch/arm/mach-vexpress/tc2_pm_psci.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-vexpress/tc2_pm_psci.c - TC2 PSCI support
+ *
+ * Created by: Achin Gupta, December 2012
+ * Copyright: (C) 2012 ARM Limited
+ *
+ * Some portions of this file were originally written by Nicolas Pitre
+ * Copyright: (C) 2012 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/psci.h>
+#include <asm/atomic.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+#include <mach/motherboard.h>
+
+#include <linux/vexpress.h>
+
+/*
+ * Platform specific state id understood by the firmware and used to
+ * program the power controller
+ */
+#define PSCI_POWER_STATE_ID 0
+
+#define TC2_CLUSTERS 2
+#define TC2_MAX_CPUS_PER_CLUSTER 3
+
+static atomic_t tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS];
+
+static int tc2_pm_psci_power_up(unsigned int cpu, unsigned int cluster)
+{
+ unsigned int mpidr = (cluster << 8) | cpu;
+ int ret = 0;
+
+ BUG_ON(!psci_ops.cpu_on);
+
+ switch (atomic_inc_return(&tc2_pm_use_count[cpu][cluster])) {
+ case 1:
+ /*
+ * This is a request to power up a cpu that linux thinks has
+ * been powered down. Retries are needed if the firmware has
+ * seen the power down request as yet.
+ */
+ do
+ ret = psci_ops.cpu_on(mpidr,
+ virt_to_phys(mcpm_entry_point));
+ while (ret == -EAGAIN);
+
+ return ret;
+ case 2:
+ /* This power up request has overtaken a power down request */
+ return ret;
+ default:
+ /* Any other value is a bug */
+ BUG();
+ }
+}
+
+static void tc2_pm_psci_power_down(void)
+{
+ struct psci_power_state power_state;
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ BUG_ON(!psci_ops.cpu_off);
+
+ switch (atomic_dec_return(&tc2_pm_use_count[cpu][cluster])) {
+ case 1:
+ /*
+ * Overtaken by a power up. Flush caches, exit coherency,
+ * return & fake a reset
+ */
+ set_cr(get_cr() & ~CR_C);
+
+ flush_cache_louis();
+
+ asm volatile ("clrex");
+ set_auxcr(get_auxcr() & ~(1 << 6));
+
+ return;
+ case 0:
+ /* A normal request to possibly power down the cluster */
+ power_state.id = PSCI_POWER_STATE_ID;
+ power_state.type = PSCI_POWER_STATE_TYPE_POWER_DOWN;
+ power_state.affinity_level = PSCI_POWER_STATE_AFFINITY_LEVEL1;
+
+ psci_ops.cpu_off(power_state);
+
+ /* On success this function never returns */
+ default:
+ /* Any other value is a bug */
+ BUG();
+ }
+}
+
+static void tc2_pm_psci_suspend(u64 unused)
+{
+ struct psci_power_state power_state;
+
+ BUG_ON(!psci_ops.cpu_suspend);
+
+ /* On TC2 always attempt to power down the cluster */
+ power_state.id = PSCI_POWER_STATE_ID;
+ power_state.type = PSCI_POWER_STATE_TYPE_POWER_DOWN;
+ power_state.affinity_level = PSCI_POWER_STATE_AFFINITY_LEVEL1;
+
+ psci_ops.cpu_suspend(power_state, virt_to_phys(mcpm_entry_point));
+
+ /* On success this function never returns */
+ BUG();
+}
+
+static const struct mcpm_platform_ops tc2_pm_power_ops = {
+ .power_up = tc2_pm_psci_power_up,
+ .power_down = tc2_pm_psci_power_down,
+ .suspend = tc2_pm_psci_suspend,
+};
+
+static void __init tc2_pm_usage_count_init(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+ atomic_set(&tc2_pm_use_count[cpu][cluster], 1);
+}
+
+static int __init tc2_pm_psci_init(void)
+{
+ int ret;
+
+ ret = psci_probe();
+ if (ret) {
+ pr_debug("psci not found. Aborting psci init\n");
+ return -ENODEV;
+ }
+
+ if (!of_machine_is_compatible("arm,vexpress,v2p-ca15_a7"))
+ return -ENODEV;
+
+ tc2_pm_usage_count_init();
+
+ ret = mcpm_platform_register(&tc2_pm_power_ops);
+ if (!ret)
+ ret = mcpm_sync_init(NULL);
+ if (!ret)
+ pr_info("TC2 power management using PSCI initialized\n");
+ return ret;
+}
+
+early_initcall(tc2_pm_psci_init);
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 4f8b8cb17ff5..ffa9b73b7d34 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -7,6 +7,7 @@
#include <linux/io.h>
#include <linux/smp.h>
#include <linux/init.h>
+#include <linux/memblock.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
@@ -369,6 +370,31 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.init_machine = v2m_init,
MACHINE_END
+static void __init v2m_dt_hdlcd_init(void)
+{
+ struct device_node *node;
+ int len, na, ns;
+ const __be32 *prop;
+ phys_addr_t fb_base, fb_size;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,hdlcd");
+ if (!node)
+ return;
+
+ na = of_n_addr_cells(node);
+ ns = of_n_size_cells(node);
+
+ prop = of_get_property(node, "framebuffer", &len);
+ if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop)))
+ return;
+
+ fb_base = of_read_number(prop, na);
+ fb_size = of_read_number(prop + na, ns);
+
+ if (WARN_ON(memblock_remove(fb_base, fb_size)))
+ return;
+};
+
static struct map_desc v2m_rs1_io_desc __initdata = {
.virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(0x1c000000),
@@ -421,6 +447,8 @@ void __init v2m_dt_init_early(void)
}
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
+
+ v2m_dt_hdlcd_init();
}
static const struct of_device_id v2m_dt_bus_match[] __initconst = {