diff options
Diffstat (limited to 'arch/arm/mach-omap2')
58 files changed, 1124 insertions, 4829 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4a023e8d1bdb..07d2e100caab 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -29,6 +29,7 @@ config ARCH_OMAP4 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select OMAP_INTERCONNECT + select OMAP_INTERCONNECT_BARRIER select PL310_ERRATA_588369 if CACHE_L2X0 select PL310_ERRATA_727915 if CACHE_L2X0 select PM_OPP if PM @@ -46,6 +47,7 @@ config SOC_OMAP5 select HAVE_ARM_TWD if SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP + select OMAP_INTERCONNECT_BARRIER config SOC_AM33XX bool "TI AM33XX" @@ -71,6 +73,7 @@ config SOC_DRA7XX select HAVE_ARM_ARCH_TIMER select IRQ_CROSSBAR select ARM_ERRATA_798181 if SMP + select OMAP_INTERCONNECT_BARRIER config ARCH_OMAP2PLUS bool @@ -92,6 +95,10 @@ config ARCH_OMAP2PLUS help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 +config OMAP_INTERCONNECT_BARRIER + bool + select ARM_HEAVY_MB + if ARCH_OMAP2PLUS @@ -178,26 +185,6 @@ config MACH_OMAP_LDP default y select OMAP_PACKAGE_CBB -config MACH_OMAP3530_LV_SOM - bool "OMAP3 Logic 3530 LV SOM board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - help - Support for the LogicPD OMAP3530 SOM Development kit - for full description please see the products webpage at - http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit - -config MACH_OMAP3_TORPEDO - bool "OMAP3 Logic 35x Torpedo board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - help - Support for the LogicPD OMAP35x Torpedo Development kit - for full description please see the products webpage at - http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 903c85be2897..935869698cbc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -12,8 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \ hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ omap_hwmod_common_data.o -clock-common = clock.o clock_common_data.o \ - clkt_dpll.o clkt_clksel.o +clock-common = clock.o secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) @@ -182,24 +181,17 @@ obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common) obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o # Clock framework -obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o +obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o -obj-$(CONFIG_SOC_OMAP2430) += clock2430.o -obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o -obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o -obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o +obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) +obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) -obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o -obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM33XX) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += $(clock-common) -obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o obj-$(CONFIG_SOC_DRA7XX) += $(clock-common) -obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o dpll44xx.o -obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM43XX) += $(clock-common) # OMAP2 clock rate set data (old "OPP" data) obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o @@ -234,8 +226,7 @@ obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o # EMU peripherals obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o -iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o -obj-y += $(iommu-m) $(iommu-y) +obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o @@ -243,9 +234,6 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o -obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o -obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 34ff14b7beab..24c9afc9e8a7 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -169,7 +169,7 @@ static const char *const ti814x_boards_compat[] __initconst = { NULL, }; -DT_MACHINE_START(TI81XX_DT, "Generic ti814x (Flattened Device Tree)") +DT_MACHINE_START(TI814X_DT, "Generic ti814x (Flattened Device Tree)") .reserve = omap_reserve, .map_io = ti81xx_map_io, .init_early = ti814x_init_early, @@ -297,7 +297,7 @@ static const char *const dra74x_boards_compat[] __initconst = { DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), - .map_io = omap5_map_io, + .map_io = dra7xx_map_io, .init_early = dra7xx_init_early, .init_late = dra7xx_init_late, .init_irq = omap_gic_of_init, @@ -316,7 +316,7 @@ static const char *const dra72x_boards_compat[] __initconst = { DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)") .reserve = omap_reserve, - .map_io = omap5_map_io, + .map_io = dra7xx_map_io, .init_early = dra7xx_init_early, .init_late = dra7xx_init_late, .init_irq = omap_gic_of_init, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c deleted file mode 100644 index 6049f60a8813..000000000000 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3logic.c - * - * Copyright (C) 2010 Li-Pro.Net - * Stephan Linz <linz@li-pro.net> - * - * Copyright (C) 2010-2012 Logic Product Development, Inc. - * Peter Barada <peter.barada@logicpd.com> - * Ashwin BIhari <ashwin.bihari@logicpd.com> - * - * Modified from Beagle, EVM, and RX51 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> - -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "mux.h" -#include "hsmmc.h" -#include "control.h" -#include "common-board-devices.h" -#include "gpmc.h" -#include "gpmc-smsc911x.h" - -#define OMAP3LOGIC_SMSC911X_CS 1 - -#define OMAP3530_LV_SOM_MMC_GPIO_CD 110 -#define OMAP3530_LV_SOM_MMC_GPIO_WP 126 -#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ 152 - -#define OMAP3_TORPEDO_MMC_GPIO_CD 127 -#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129 - -static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data omap3logic_vmmc1 = { - .constraints = { - .name = "VMMC1", - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3logic_vmmc1_supply), - .consumer_supplies = omap3logic_vmmc1_supply, -}; - -static struct twl4030_gpio_platform_data omap3logic_gpio_data = { - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) - | BIT(13) | BIT(15) | BIT(16) | BIT(17), -}; - -static struct twl4030_usb_data omap3logic_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - - -static struct twl4030_platform_data omap3logic_twldata = { - /* platform_data for children goes here */ - .gpio = &omap3logic_gpio_data, - .vmmc1 = &omap3logic_vmmc1, - .usb = &omap3logic_usb_data, -}; - -static int __init omap3logic_i2c_init(void) -{ - omap3_pmic_init("twl4030", &omap3logic_twldata); - return 0; -} - -static struct omap2_hsmmc_info __initdata board_mmc_info[] = { - { - .name = "external", - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - {} /* Terminator */ -}; - -static void __init board_mmc_init(void) -{ - if (machine_is_omap3530_lv_som()) { - /* OMAP3530 LV SOM board */ - board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD; - board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP; - omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT); - } else if (machine_is_omap3_torpedo()) { - /* OMAP3 Torpedo board */ - board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD; - omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT); - } else { - /* unsupported board */ - printk(KERN_ERR "%s(): unknown machine type\n", __func__); - return; - } - - omap_hsmmc_init(board_mmc_info); -} - -static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { - .cs = OMAP3LOGIC_SMSC911X_CS, - .gpio_irq = -EINVAL, - .gpio_reset = -EINVAL, -}; - -/* TODO/FIXME (comment by Peter Barada, LogicPD): - * Fix the PBIAS voltage for Torpedo MMC1 pins that - * are used for other needs (IRQs, etc). */ -static void omap3torpedo_fix_pbias_voltage(void) -{ - u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; - u32 reg; - - if (machine_is_omap3_torpedo()) - { - /* Set the bias for the pin */ - reg = omap_ctrl_readl(control_pbias_offset); - - reg &= ~OMAP343X_PBIASLITEPWRDNZ1; - omap_ctrl_writel(reg, control_pbias_offset); - - /* 100ms delay required for PBIAS configuration */ - msleep(100); - - reg |= OMAP343X_PBIASLITEVMODE1; - reg |= OMAP343X_PBIASLITEPWRDNZ1; - omap_ctrl_writel(reg | 0x300, control_pbias_offset); - } -} - -static inline void __init board_smsc911x_init(void) -{ - if (machine_is_omap3530_lv_som()) { - /* OMAP3530 LV SOM board */ - board_smsc911x_data.gpio_irq = - OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ; - omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT); - } else if (machine_is_omap3_torpedo()) { - /* OMAP3 Torpedo board */ - board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ; - omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT); - } else { - /* unsupported board */ - printk(KERN_ERR "%s(): unknown machine type\n", __func__); - return; - } - - gpmc_smsc911x_init(&board_smsc911x_data); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* mUSB */ - OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init omap3logic_init(void) -{ - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap3torpedo_fix_pbias_voltage(); - omap3logic_i2c_init(); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - board_mmc_init(); - board_smsc911x_init(); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3logic_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3logic_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c deleted file mode 100644 index 969e1003dd92..000000000000 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ /dev/null @@ -1,633 +0,0 @@ -/* - * board-omap3pandora.c (Pandora Handheld Console) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <linux/spi/spi.h> -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include <linux/omap-gpmc.h> -#include <linux/wl12xx.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/leds.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> -#include <linux/regulator/fixed.h> -#include <linux/usb/phy.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include <video/omapdss.h> -#include <video/omap-panel-data.h> -#include <linux/platform_data/mtd-nand-omap2.h> - -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#define PANDORA_WIFI_IRQ_GPIO 21 -#define PANDORA_WIFI_NRESET_GPIO 23 -#define OMAP3_PANDORA_TS_GPIO 94 - -static struct mtd_partition omap3pandora_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, - .size = 15 * NAND_BLOCK_SIZE, - }, { - .name = "uboot-env", - .offset = MTDPART_OFS_APPEND, - .size = 1 * NAND_BLOCK_SIZE, - }, { - .name = "boot", - .offset = MTDPART_OFS_APPEND, - .size = 80 * NAND_BLOCK_SIZE, - }, { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_nand_platform_data pandora_nand_data = { - .cs = 0, - .devsize = NAND_BUSWIDTH_16, - .xfer_type = NAND_OMAP_PREFETCH_DMA, - .parts = omap3pandora_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions), -}; - -static struct gpio_led pandora_gpio_leds[] = { - { - .name = "pandora::sd1", - .default_trigger = "mmc0", - .gpio = 128, - }, { - .name = "pandora::sd2", - .default_trigger = "mmc1", - .gpio = 129, - }, { - .name = "pandora::bluetooth", - .gpio = 158, - }, { - .name = "pandora::wifi", - .gpio = 159, - }, -}; - -static struct gpio_led_platform_data pandora_gpio_led_data = { - .leds = pandora_gpio_leds, - .num_leds = ARRAY_SIZE(pandora_gpio_leds), -}; - -static struct platform_device pandora_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &pandora_gpio_led_data, - }, -}; - -static struct platform_device pandora_backlight = { - .name = "pandora-backlight", - .id = -1, -}; - -#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ -{ \ - .gpio = gpio_num, \ - .type = ev_type, \ - .code = ev_code, \ - .active_low = act_low, \ - .debounce_interval = 4, \ - .desc = "btn " descr, \ -} - -#define GPIO_BUTTON_LOW(gpio_num, event_code, description) \ - GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description) - -static struct gpio_keys_button pandora_gpio_keys[] = { - GPIO_BUTTON_LOW(110, KEY_UP, "up"), - GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), - GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), - GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), - GPIO_BUTTON_LOW(109, KEY_PAGEUP, "game 1"), - GPIO_BUTTON_LOW(111, KEY_END, "game 2"), - GPIO_BUTTON_LOW(106, KEY_PAGEDOWN, "game 3"), - GPIO_BUTTON_LOW(101, KEY_HOME, "game 4"), - GPIO_BUTTON_LOW(102, KEY_RIGHTSHIFT, "l"), - GPIO_BUTTON_LOW(97, KEY_KPPLUS, "l2"), - GPIO_BUTTON_LOW(105, KEY_RIGHTCTRL, "r"), - GPIO_BUTTON_LOW(107, KEY_KPMINUS, "r2"), - GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"), - GPIO_BUTTON_LOW(99, KEY_MENU, "menu"), - GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"), - GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"), - GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"), -}; - -static struct gpio_keys_platform_data pandora_gpio_key_info = { - .buttons = pandora_gpio_keys, - .nbuttons = ARRAY_SIZE(pandora_gpio_keys), -}; - -static struct platform_device pandora_keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &pandora_gpio_key_info, - }, -}; - -static const uint32_t board_keymap[] = { - /* row, col, code */ - KEY(0, 0, KEY_9), - KEY(0, 1, KEY_8), - KEY(0, 2, KEY_I), - KEY(0, 3, KEY_J), - KEY(0, 4, KEY_N), - KEY(0, 5, KEY_M), - KEY(1, 0, KEY_0), - KEY(1, 1, KEY_7), - KEY(1, 2, KEY_U), - KEY(1, 3, KEY_H), - KEY(1, 4, KEY_B), - KEY(1, 5, KEY_SPACE), - KEY(2, 0, KEY_BACKSPACE), - KEY(2, 1, KEY_6), - KEY(2, 2, KEY_Y), - KEY(2, 3, KEY_G), - KEY(2, 4, KEY_V), - KEY(2, 5, KEY_FN), - KEY(3, 0, KEY_O), - KEY(3, 1, KEY_5), - KEY(3, 2, KEY_T), - KEY(3, 3, KEY_F), - KEY(3, 4, KEY_C), - KEY(4, 0, KEY_P), - KEY(4, 1, KEY_4), - KEY(4, 2, KEY_R), - KEY(4, 3, KEY_D), - KEY(4, 4, KEY_X), - KEY(5, 0, KEY_K), - KEY(5, 1, KEY_3), - KEY(5, 2, KEY_E), - KEY(5, 3, KEY_S), - KEY(5, 4, KEY_Z), - KEY(6, 0, KEY_L), - KEY(6, 1, KEY_2), - KEY(6, 2, KEY_W), - KEY(6, 3, KEY_A), - KEY(6, 4, KEY_DOT), - KEY(7, 0, KEY_ENTER), - KEY(7, 1, KEY_1), - KEY(7, 2, KEY_Q), - KEY(7, 3, KEY_LEFTSHIFT), - KEY(7, 4, KEY_COMMA), -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data pandora_kp_data = { - .keymap_data = &board_map_data, - .rows = 8, - .cols = 6, - .rep = 1, -}; - -static struct connector_atv_platform_data pandora_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device pandora_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &pandora_tv_pdata, -}; - -static struct omap_dss_board_info pandora_dss_data = { - .default_display_name = "lcd", -}; - -static void pandora_wl1251_init_card(struct mmc_card *card) -{ - /* - * We have TI wl1251 attached to MMC3. Pass this information to - * SDIO core because it can't be probed by normal methods. - */ - if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { - card->quirks |= MMC_QUIRK_NONSTD_SDIO; - card->cccr.wide_bus = 1; - card->cis.vendor = 0x104c; - card->cis.device = 0x9066; - card->cis.blksize = 512; - card->cis.max_dtr = 20000000; - } -} - -static struct omap2_hsmmc_info omap3pandora_mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 126, - .ext_clock = 0, - .deferred = true, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 127, - .ext_clock = 1, - .transceiver = true, - .deferred = true, - }, - { - .mmc = 3, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .init_card = pandora_wl1251_init_card, - }, - {} /* Terminator */ -}; - -static int omap3pandora_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - int ret, gpio_32khz; - - /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */ - omap3pandora_mmc[0].gpio_cd = gpio + 0; - omap3pandora_mmc[1].gpio_cd = gpio + 1; - omap_hsmmc_late_init(omap3pandora_mmc); - - /* gpio + 13 drives 32kHz buffer for wifi module */ - gpio_32khz = gpio + 13; - ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz"); - if (ret < 0) { - pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret); - return -ENODEV; - } - - return 0; -} - -static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { - .setup = omap3pandora_twl_gpio_setup, -}; - -static struct regulator_consumer_supply pandora_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply pandora_vmmc2_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1") -}; - -static struct regulator_consumer_supply pandora_vmmc3_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), -}; - -static struct regulator_consumer_supply pandora_vdds_supplies[] = { - REGULATOR_SUPPLY("vdds_sdi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { - REGULATOR_SUPPLY("vcc", "spi1.1"), -}; - -static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ -}; - -/* ads7846 on SPI and 2 nub controllers on I2C */ -static struct regulator_consumer_supply pandora_vaux4_supplies[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), - REGULATOR_SUPPLY("vcc", "3-0066"), - REGULATOR_SUPPLY("vcc", "3-0067"), -}; - -static struct regulator_consumer_supply pandora_adac_supply[] = { - REGULATOR_SUPPLY("vcc", "soc-audio"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data pandora_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc1_supply), - .consumer_supplies = pandora_vmmc1_supply, -}; - -/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ -static struct regulator_init_data pandora_vmmc2 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc2_supply), - .consumer_supplies = pandora_vmmc2_supply, -}; - -/* VAUX1 for LCD */ -static struct regulator_init_data pandora_vaux1 = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vcc_lcd_supply), - .consumer_supplies = pandora_vcc_lcd_supply, -}; - -/* VAUX2 for USB host PHY */ -static struct regulator_init_data pandora_vaux2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_usb_phy_supply), - .consumer_supplies = pandora_usb_phy_supply, -}; - -/* VAUX4 for ads7846 and nubs */ -static struct regulator_init_data pandora_vaux4 = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vaux4_supplies), - .consumer_supplies = pandora_vaux4_supplies, -}; - -/* VSIM for audio DAC */ -static struct regulator_init_data pandora_vsim = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_adac_supply), - .consumer_supplies = pandora_adac_supply, -}; - -/* Fixed regulator internal to Wifi module */ -static struct regulator_init_data pandora_vmmc3 = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), - .consumer_supplies = pandora_vmmc3_supply, -}; - -static struct fixed_voltage_config pandora_vwlan = { - .supply_name = "vwlan", - .microvolts = 1800000, /* 1.8V */ - .gpio = PANDORA_WIFI_NRESET_GPIO, - .startup_delay = 50000, /* 50ms */ - .enable_high = 1, - .enabled_at_boot = 0, - .init_data = &pandora_vmmc3, -}; - -static struct platform_device pandora_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &pandora_vwlan, - }, -}; - -static struct twl4030_bci_platform_data pandora_bci_data; - -static struct twl4030_power_data pandora_power_data = { - .use_poweroff = true, -}; - -static struct twl4030_platform_data omap3pandora_twldata = { - .gpio = &omap3pandora_gpio_data, - .vmmc1 = &pandora_vmmc1, - .vmmc2 = &pandora_vmmc2, - .vaux1 = &pandora_vaux1, - .vaux2 = &pandora_vaux2, - .vaux4 = &pandora_vaux4, - .vsim = &pandora_vsim, - .keypad = &pandora_kp_data, - .bci = &pandora_bci_data, - .power = &pandora_power_data, -}; - -static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { - { - I2C_BOARD_INFO("bq27500", 0x55), - .flags = I2C_CLIENT_WAKE, - }, -}; - -static int __init omap3pandora_i2c_init(void) -{ - omap3_pmic_get_config(&omap3pandora_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - omap3pandora_twldata.vdac->constraints.apply_uV = true; - - omap3pandora_twldata.vpll2->constraints.apply_uV = true; - omap3pandora_twldata.vpll2->num_consumer_supplies = - ARRAY_SIZE(pandora_vdds_supplies); - omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies; - - omap3_pmic_init("tps65950", &omap3pandora_twldata); - /* i2c2 pins are not connected */ - omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, - ARRAY_SIZE(omap3pandora_i2c3_boardinfo)); - return 0; -} - -static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 24, - .nreset_gpio = 157, -}; - -static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { - { - .modalias = "panel-tpo-td043mtea1", - .bus_num = 1, - .chip_select = 1, - .max_speed_hz = 375000, - .platform_data = &pandora_lcd_pdata, - } -}; - -static void __init pandora_wl1251_init(void) -{ - struct wl1251_platform_data pandora_wl1251_pdata; - int ret; - - memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - - pandora_wl1251_pdata.power_gpio = -1; - - ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); - if (ret < 0) - goto fail; - - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); - if (pandora_wl1251_pdata.irq < 0) - goto fail_irq; - - pandora_wl1251_pdata.use_eeprom = true; - ret = wl1251_set_platform_data(&pandora_wl1251_pdata); - if (ret < 0) - goto fail_irq; - - return; - -fail_irq: - gpio_free(PANDORA_WIFI_IRQ_GPIO); -fail: - printk(KERN_ERR "wl1251 board initialisation failed\n"); -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = 16, - .vcc_gpio = -EINVAL, - }, -}; - -static struct platform_device *omap3pandora_devices[] __initdata = { - &pandora_leds_gpio, - &pandora_keys_gpio, - &pandora_vwlan_device, - &pandora_backlight, - &pandora_tv_connector_device, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init omap3pandora_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_hsmmc_init(omap3pandora_mmc); - omap3pandora_i2c_init(); - pandora_wl1251_init(); - platform_add_devices(omap3pandora_devices, - ARRAY_SIZE(omap3pandora_devices)); - omap_display_init(&pandora_dss_data); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - spi_register_board_info(omap3pandora_spi_board_info, - ARRAY_SIZE(omap3pandora_spi_board_info)); - omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - gpmc_nand_init(&pandora_nand_data, NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3pandora_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index eb69acf21014..3f6521313c93 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -23,12 +23,13 @@ #include "clock.h" #include "clock3xxx.h" -#include "clock34xx.h" #include "sdrc.h" #include "sram.h" #define CYCLES_PER_MHZ 1000000 +struct clk *sdrc_ick_p, *arm_fck_p; + /* * CORE DPLL (DPLL3) M2 divider rate programming functions * @@ -60,12 +61,14 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate, if (!clk || !rate) return -EINVAL; - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); + new_div = DIV_ROUND_UP(parent_rate, rate); + validrate = parent_rate / new_div; + if (validrate != rate) return -EINVAL; - sdrcrate = __clk_get_rate(sdrc_ick_p); - clkrate = __clk_get_rate(hw->clk); + sdrcrate = clk_get_rate(sdrc_ick_p); + clkrate = clk_hw_get_rate(hw); if (rate > clkrate) sdrcrate <<= ((rate / clkrate) >> 1); else @@ -83,7 +86,7 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate, /* * XXX This only needs to be done when the CPU frequency changes */ - _mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; + _mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; c += 1; /* for safety */ c *= SDRC_MPURATE_LOOPS; diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c deleted file mode 100644 index 7ee26108ac0d..000000000000 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ /dev/null @@ -1,466 +0,0 @@ -/* - * clkt_clksel.c - OMAP2/3/4 clksel clock functions - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - * clksel clocks are clocks that do not have a fixed parent, or that - * can divide their parent's rate, or possibly both at the same time, based - * on the contents of a hardware register bitfield. - * - * All of the various mux and divider settings can be encoded into - * struct clksel* data structures, and then these can be autogenerated - * from some hardware database for each new chip generation. This - * should avoid the need to write, review, and validate a lot of new - * clock code for each new chip, since it can be exported from the SoC - * design flow. This is now done on OMAP4. - * - * The fusion of mux and divider clocks is a software creation. In - * hardware reality, the multiplexer (parent selection) and the - * divider exist separately. XXX At some point these clksel clocks - * should be split into "divider" clocks and "mux" clocks to better - * match the hardware. - * - * (The name "clksel" comes from the name of the corresponding - * register field in the OMAP2/3 family of SoCs.) - * - * XXX Currently these clocks are only used in the OMAP2/3/4 code, but - * many of the OMAP1 clocks should be convertible to use this - * mechanism. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk-provider.h> -#include <linux/io.h> -#include <linux/bug.h> - -#include "clock.h" - -/* Private functions */ - -/** - * _get_clksel_by_parent() - return clksel struct for a given clk & parent - * @clk: OMAP struct clk ptr to inspect - * @src_clk: OMAP struct clk ptr of the parent clk to search for - * - * Scan the struct clksel array associated with the clock to find - * the element associated with the supplied parent clock address. - * Returns a pointer to the struct clksel on success or NULL on error. - */ -static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk, - struct clk *src_clk) -{ - const struct clksel *clks; - - if (!src_clk) - return NULL; - - for (clks = clk->clksel; clks->parent; clks++) - if (clks->parent == src_clk) - break; /* Found the requested parent */ - - if (!clks->parent) { - /* This indicates a data problem */ - WARN(1, "clock: %s: could not find parent clock %s in clksel array\n", - __clk_get_name(clk->hw.clk), __clk_get_name(src_clk)); - return NULL; - } - - return clks; -} - -/** - * _write_clksel_reg() - program a clock's clksel register in hardware - * @clk: struct clk * to program - * @v: clksel bitfield value to program (with LSB at bit 0) - * - * Shift the clksel register bitfield value @v to its appropriate - * location in the clksel register and write it in. This function - * will ensure that the write to the clksel_reg reaches its - * destination before returning -- important since PRM and CM register - * accesses can be quite slow compared to ARM cycles -- but does not - * take into account any time the hardware might take to switch the - * clock source. - */ -static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val) -{ - u32 v; - - v = omap2_clk_readl(clk, clk->clksel_reg); - v &= ~clk->clksel_mask; - v |= field_val << __ffs(clk->clksel_mask); - omap2_clk_writel(v, clk, clk->clksel_reg); - - v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */ -} - -/** - * _clksel_to_divisor() - turn clksel field value into integer divider - * @clk: OMAP struct clk to use - * @field_val: register field value to find - * - * Given a struct clk of a rate-selectable clksel clock, and a register field - * value to search for, find the corresponding clock divisor. The register - * field value should be pre-masked and shifted down so the LSB is at bit 0 - * before calling. Returns 0 on error or returns the actual integer divisor - * upon success. - */ -static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val) -{ - const struct clksel *clks; - const struct clksel_rate *clkr; - struct clk *parent; - - parent = __clk_get_parent(clk->hw.clk); - - clks = _get_clksel_by_parent(clk, parent); - if (!clks) - return 0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - if (clkr->val == field_val) - break; - } - - if (!clkr->div) { - /* This indicates a data error */ - WARN(1, "clock: %s: could not find fieldval %d for parent %s\n", - __clk_get_name(clk->hw.clk), field_val, - __clk_get_name(parent)); - return 0; - } - - return clkr->div; -} - -/** - * _divisor_to_clksel() - turn clksel integer divisor into a field value - * @clk: OMAP struct clk to use - * @div: integer divisor to search for - * - * Given a struct clk of a rate-selectable clksel clock, and a clock - * divisor, find the corresponding register field value. Returns the - * register field value _before_ left-shifting (i.e., LSB is at bit - * 0); or returns 0xFFFFFFFF (~0) upon error. - */ -static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div) -{ - const struct clksel *clks; - const struct clksel_rate *clkr; - struct clk *parent; - - /* should never happen */ - WARN_ON(div == 0); - - parent = __clk_get_parent(clk->hw.clk); - clks = _get_clksel_by_parent(clk, parent); - if (!clks) - return ~0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - if (clkr->div == div) - break; - } - - if (!clkr->div) { - pr_err("clock: %s: could not find divisor %d for parent %s\n", - __clk_get_name(clk->hw.clk), div, - __clk_get_name(parent)); - return ~0; - } - - return clkr->val; -} - -/** - * _read_divisor() - get current divisor applied to parent clock (from hdwr) - * @clk: OMAP struct clk to use. - * - * Read the current divisor register value for @clk that is programmed - * into the hardware, convert it into the actual divisor value, and - * return it; or return 0 on error. - */ -static u32 _read_divisor(struct clk_hw_omap *clk) -{ - u32 v; - - if (!clk->clksel || !clk->clksel_mask) - return 0; - - v = omap2_clk_readl(clk, clk->clksel_reg); - v &= clk->clksel_mask; - v >>= __ffs(clk->clksel_mask); - - return _clksel_to_divisor(clk, v); -} - -/* Public functions */ - -/** - * omap2_clksel_round_rate_div() - find divisor for the given clock and rate - * @clk: OMAP struct clk to use - * @target_rate: desired clock rate - * @new_div: ptr to where we should store the divisor - * - * Finds 'best' divider value in an array based on the source and target - * rates. The divider array must be sorted with smallest divider first. - * This function is also used by the DPLL3 M2 divider code. - * - * Returns the rounded clock rate or returns 0xffffffff on error. - */ -u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk, - unsigned long target_rate, - u32 *new_div) -{ - unsigned long test_rate; - const struct clksel *clks; - const struct clksel_rate *clkr; - u32 last_div = 0; - struct clk *parent; - unsigned long parent_rate; - const char *clk_name; - - parent = __clk_get_parent(clk->hw.clk); - clk_name = __clk_get_name(clk->hw.clk); - parent_rate = __clk_get_rate(parent); - - if (!clk->clksel || !clk->clksel_mask) - return ~0; - - pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", - clk_name, target_rate); - - *new_div = 1; - - clks = _get_clksel_by_parent(clk, parent); - if (!clks) - return ~0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - /* Sanity check */ - if (clkr->div <= last_div) - pr_err("clock: %s: clksel_rate table not sorted\n", - clk_name); - - last_div = clkr->div; - - test_rate = parent_rate / clkr->div; - - if (test_rate <= target_rate) - break; /* found it */ - } - - if (!clkr->div) { - pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n", - clk_name, target_rate, __clk_get_name(parent)); - return ~0; - } - - *new_div = clkr->div; - - pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, - (parent_rate / clkr->div)); - - return parent_rate / clkr->div; -} - -/* - * Clocktype interface functions to the OMAP clock code - * (i.e., those used in struct clk field function pointers, etc.) - */ - -/** - * omap2_clksel_find_parent_index() - return the array index of the current - * hardware parent of @hw - * @hw: struct clk_hw * to find the current hardware parent of - * - * Given a struct clk_hw pointer @hw to the 'hw' member of a struct - * clk_hw_omap record representing a source-selectable hardware clock, - * read the hardware register and determine what its parent is - * currently set to. Intended to be called only by the common clock - * framework struct clk_hw_ops.get_parent function pointer. Return - * the array index of this parent clock upon success -- there is no - * way to return an error, so if we encounter an error, just WARN() - * and pretend that we know that we're doing. - */ -u8 omap2_clksel_find_parent_index(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - const struct clksel *clks; - const struct clksel_rate *clkr; - u32 r, found = 0; - struct clk *parent; - const char *clk_name; - int ret = 0, f = 0; - - parent = __clk_get_parent(hw->clk); - clk_name = __clk_get_name(hw->clk); - - /* XXX should be able to return an error */ - WARN((!clk->clksel || !clk->clksel_mask), - "clock: %s: attempt to call on a non-clksel clock", clk_name); - - r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask; - r >>= __ffs(clk->clksel_mask); - - for (clks = clk->clksel; clks->parent && !found; clks++) { - for (clkr = clks->rates; clkr->div && !found; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - if (clkr->val == r) { - found = 1; - ret = f; - } - } - f++; - } - - /* This indicates a data error */ - WARN(!found, "clock: %s: init parent: could not find regval %0x\n", - clk_name, r); - - return ret; -} - - -/** - * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field - * @clk: struct clk * - * - * This function is intended to be called only by the clock framework. - * Each clksel clock should have its struct clk .recalc field set to this - * function. Returns the clock's current rate, based on its parent's rate - * and its current divisor setting in the hardware. - */ -unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate) -{ - unsigned long rate; - u32 div = 0; - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - - if (!parent_rate) - return 0; - - div = _read_divisor(clk); - if (!div) - rate = parent_rate; - else - rate = parent_rate / div; - - pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__, - __clk_get_name(hw->clk), rate, div); - - return rate; -} - -/** - * omap2_clksel_round_rate() - find rounded rate for the given clock and rate - * @clk: OMAP struct clk to use - * @target_rate: desired clock rate - * - * This function is intended to be called only by the clock framework. - * Finds best target rate based on the source clock and possible dividers. - * rates. The divider array must be sorted with smallest divider first. - * - * Returns the rounded clock rate or returns 0xffffffff on error. - */ -long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate, - unsigned long *parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 new_div; - - return omap2_clksel_round_rate_div(clk, target_rate, &new_div); -} - -/** - * omap2_clksel_set_rate() - program clock rate in hardware - * @clk: struct clk * to program rate - * @rate: target rate to program - * - * This function is intended to be called only by the clock framework. - * Program @clk's rate to @rate in the hardware. The clock can be - * either enabled or disabled when this happens, although if the clock - * is enabled, some downstream devices may glitch or behave - * unpredictably when the clock rate is changed - this depends on the - * hardware. This function does not currently check the usecount of - * the clock, so if multiple drivers are using the clock, and the rate - * is changed, they will all be affected without any notification. - * Returns -EINVAL upon error, or 0 upon success. - */ -int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 field_val, validrate, new_div = 0; - - if (!clk->clksel || !clk->clksel_mask) - return -EINVAL; - - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); - if (validrate != rate) - return -EINVAL; - - field_val = _divisor_to_clksel(clk, new_div); - if (field_val == ~0) - return -EINVAL; - - _write_clksel_reg(clk, field_val); - - pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk), - __clk_get_rate(hw->clk)); - - return 0; -} - -/* - * Clksel parent setting function - not passed in struct clk function - * pointer - instead, the OMAP clock code currently assumes that any - * parent-setting clock is a clksel clock, and calls - * omap2_clksel_set_parent() by default - */ - -/** - * omap2_clksel_set_parent() - change a clock's parent clock - * @clk: struct clk * of the child clock - * @new_parent: struct clk * of the new parent clock - * - * This function is intended to be called only by the clock framework. - * Change the parent clock of clock @clk to @new_parent. This is - * intended to be used while @clk is disabled. This function does not - * currently check the usecount of the clock, so if multiple drivers - * are using the clock, and the parent is changed, they will all be - * affected without any notification. Returns -EINVAL upon error, or - * 0 upon success. - */ -int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - - if (!clk->clksel || !clk->clksel_mask) - return -EINVAL; - - _write_clksel_reg(clk, field_val); - return 0; -} diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c deleted file mode 100644 index f251a14cbf16..000000000000 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ /dev/null @@ -1,370 +0,0 @@ -/* - * OMAP2/3/4 DPLL clock functions - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk-provider.h> -#include <linux/io.h> - -#include <asm/div64.h> - -#include "clock.h" - -/* DPLL rate rounding: minimum DPLL multiplier, divider values */ -#define DPLL_MIN_MULTIPLIER 2 -#define DPLL_MIN_DIVIDER 1 - -/* Possible error results from _dpll_test_mult */ -#define DPLL_MULT_UNDERFLOW -1 - -/* - * Scale factor to mitigate roundoff errors in DPLL rate rounding. - * The higher the scale factor, the greater the risk of arithmetic overflow, - * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR - * must be a power of DPLL_SCALE_BASE. - */ -#define DPLL_SCALE_FACTOR 64 -#define DPLL_SCALE_BASE 2 -#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \ - (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE)) - -/* - * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx. - * From device data manual section 4.3 "DPLL and DLL Specifications". - */ -#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000 -#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000 - -/* _dpll_test_fint() return codes */ -#define DPLL_FINT_UNDERFLOW -1 -#define DPLL_FINT_INVALID -2 - -/* Private functions */ - -/* - * _dpll_test_fint - test whether an Fint value is valid for the DPLL - * @clk: DPLL struct clk to test - * @n: divider value (N) to test - * - * Tests whether a particular divider @n will result in a valid DPLL - * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter - * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate - * (assuming that it is counting N upwards), or -2 if the enclosing loop - * should skip to the next iteration (again assuming N is increasing). - */ -static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) -{ - struct dpll_data *dd; - long fint, fint_min, fint_max; - int ret = 0; - - dd = clk->dpll_data; - - /* DPLL divider must result in a valid jitter correction val */ - fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n; - - if (dd->flags & DPLL_J_TYPE) { - fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN; - fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX; - } else { - fint_min = ti_clk_features.fint_min; - fint_max = ti_clk_features.fint_max; - } - - if (!fint_min || !fint_max) { - WARN(1, "No fint limits available!\n"); - return DPLL_FINT_INVALID; - } - - if (fint < ti_clk_features.fint_min) { - pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n", - n); - dd->max_divider = n; - ret = DPLL_FINT_UNDERFLOW; - } else if (fint > ti_clk_features.fint_max) { - pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n", - n); - dd->min_divider = n; - ret = DPLL_FINT_INVALID; - } else if (fint > ti_clk_features.fint_band1_max && - fint < ti_clk_features.fint_band2_min) { - pr_debug("rejecting n=%d due to Fint failure\n", n); - ret = DPLL_FINT_INVALID; - } - - return ret; -} - -static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, - unsigned int m, unsigned int n) -{ - unsigned long long num; - - num = (unsigned long long)parent_rate * m; - do_div(num, n); - return num; -} - -/* - * _dpll_test_mult - test a DPLL multiplier value - * @m: pointer to the DPLL m (multiplier) value under test - * @n: current DPLL n (divider) value under test - * @new_rate: pointer to storage for the resulting rounded rate - * @target_rate: the desired DPLL rate - * @parent_rate: the DPLL's parent clock rate - * - * This code tests a DPLL multiplier value, ensuring that the - * resulting rate will not be higher than the target_rate, and that - * the multiplier value itself is valid for the DPLL. Initially, the - * integer pointed to by the m argument should be prescaled by - * multiplying by DPLL_SCALE_FACTOR. The code will replace this with - * a non-scaled m upon return. This non-scaled m will result in a - * new_rate as close as possible to target_rate (but not greater than - * target_rate) given the current (parent_rate, n, prescaled m) - * triple. Returns DPLL_MULT_UNDERFLOW in the event that the - * non-scaled m attempted to underflow, which can allow the calling - * function to bail out early; or 0 upon success. - */ -static int _dpll_test_mult(int *m, int n, unsigned long *new_rate, - unsigned long target_rate, - unsigned long parent_rate) -{ - int r = 0, carry = 0; - - /* Unscale m and round if necessary */ - if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL) - carry = 1; - *m = (*m / DPLL_SCALE_FACTOR) + carry; - - /* - * The new rate must be <= the target rate to avoid programming - * a rate that is impossible for the hardware to handle - */ - *new_rate = _dpll_compute_new_rate(parent_rate, *m, n); - if (*new_rate > target_rate) { - (*m)--; - *new_rate = 0; - } - - /* Guard against m underflow */ - if (*m < DPLL_MIN_MULTIPLIER) { - *m = DPLL_MIN_MULTIPLIER; - *new_rate = 0; - r = DPLL_MULT_UNDERFLOW; - } - - if (*new_rate == 0) - *new_rate = _dpll_compute_new_rate(parent_rate, *m, n); - - return r; -} - -/** - * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not - * @v: bitfield value of the DPLL enable - * - * Checks given DPLL enable bitfield to see whether the DPLL is in bypass - * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise. - */ -static int _omap2_dpll_is_in_bypass(u32 v) -{ - u8 mask, val; - - mask = ti_clk_features.dpll_bypass_vals; - - /* - * Each set bit in the mask corresponds to a bypass value equal - * to the bitshift. Go through each set-bit in the mask and - * compare against the given register value. - */ - while (mask) { - val = __ffs(mask); - mask ^= (1 << val); - if (v == val) - return 1; - } - - return 0; -} - -/* Public functions */ -u8 omap2_init_dpll_parent(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; - struct dpll_data *dd; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - v = omap2_clk_readl(clk, dd->control_reg); - v &= dd->enable_mask; - v >>= __ffs(dd->enable_mask); - - /* Reparent the struct clk in case the dpll is in bypass */ - if (_omap2_dpll_is_in_bypass(v)) - return 1; - - return 0; -} - -/** - * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate - * @clk: struct clk * of a DPLL - * - * DPLLs can be locked or bypassed - basically, enabled or disabled. - * When locked, the DPLL output depends on the M and N values. When - * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock - * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and - * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively - * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk. - * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is - * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0 - * if the clock @clk is not a DPLL. - */ -unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk) -{ - long long dpll_clk; - u32 dpll_mult, dpll_div, v; - struct dpll_data *dd; - - dd = clk->dpll_data; - if (!dd) - return 0; - - /* Return bypass rate if DPLL is bypassed */ - v = omap2_clk_readl(clk, dd->control_reg); - v &= dd->enable_mask; - v >>= __ffs(dd->enable_mask); - - if (_omap2_dpll_is_in_bypass(v)) - return __clk_get_rate(dd->clk_bypass); - - v = omap2_clk_readl(clk, dd->mult_div1_reg); - dpll_mult = v & dd->mult_mask; - dpll_mult >>= __ffs(dd->mult_mask); - dpll_div = v & dd->div1_mask; - dpll_div >>= __ffs(dd->div1_mask); - - dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult; - do_div(dpll_clk, dpll_div + 1); - - return dpll_clk; -} - -/* DPLL rate rounding code */ - -/** - * omap2_dpll_round_rate - round a target rate for an OMAP DPLL - * @clk: struct clk * for a DPLL - * @target_rate: desired DPLL clock rate - * - * Given a DPLL and a desired target rate, round the target rate to a - * possible, programmable rate for this DPLL. Attempts to select the - * minimum possible n. Stores the computed (m, n) in the DPLL's - * dpll_data structure so set_rate() will not need to call this - * (expensive) function again. Returns ~0 if the target rate cannot - * be rounded, or the rounded rate upon success. - */ -long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, - unsigned long *parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - int m, n, r, scaled_max_m; - int min_delta_m = INT_MAX, min_delta_n = INT_MAX; - unsigned long scaled_rt_rp; - unsigned long new_rate = 0; - struct dpll_data *dd; - unsigned long ref_rate; - long delta; - long prev_min_delta = LONG_MAX; - const char *clk_name; - - if (!clk || !clk->dpll_data) - return ~0; - - dd = clk->dpll_data; - - ref_rate = __clk_get_rate(dd->clk_ref); - clk_name = __clk_get_name(hw->clk); - pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n", - clk_name, target_rate); - - scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR); - scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR; - - dd->last_rounded_rate = 0; - - for (n = dd->min_divider; n <= dd->max_divider; n++) { - - /* Is the (input clk, divider) pair valid for the DPLL? */ - r = _dpll_test_fint(clk, n); - if (r == DPLL_FINT_UNDERFLOW) - break; - else if (r == DPLL_FINT_INVALID) - continue; - - /* Compute the scaled DPLL multiplier, based on the divider */ - m = scaled_rt_rp * n; - - /* - * Since we're counting n up, a m overflow means we - * can bail out completely (since as n increases in - * the next iteration, there's no way that m can - * increase beyond the current m) - */ - if (m > scaled_max_m) - break; - - r = _dpll_test_mult(&m, n, &new_rate, target_rate, - ref_rate); - - /* m can't be set low enough for this n - try with a larger n */ - if (r == DPLL_MULT_UNDERFLOW) - continue; - - /* skip rates above our target rate */ - delta = target_rate - new_rate; - if (delta < 0) - continue; - - if (delta < prev_min_delta) { - prev_min_delta = delta; - min_delta_m = m; - min_delta_n = n; - } - - pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n", - clk_name, m, n, new_rate); - - if (delta == 0) - break; - } - - if (prev_min_delta == LONG_MAX) { - pr_debug("clock: %s: cannot round to rate %lu\n", - clk_name, target_rate); - return ~0; - } - - dd->last_rounded_m = min_delta_m; - dd->last_rounded_n = min_delta_n; - dd->last_rounded_rate = target_rate - prev_min_delta; - - return dd->last_rounded_rate; -} - diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c deleted file mode 100644 index 55eb579aeae1..000000000000 --- a/arch/arm/mach-omap2/clkt_iclk.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * OMAP2/3 interface clock control - * - * Copyright (C) 2011 Nokia Corporation - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk-provider.h> -#include <linux/io.h> - -#include "clock.h" - -/* Register offsets */ -#define CM_AUTOIDLE 0x30 -#define CM_ICLKEN 0x10 - -/* Private functions */ - -/* XXX */ -void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk) -{ - u32 v; - void __iomem *r; - - r = (__force void __iomem *) - ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN)); - - v = omap2_clk_readl(clk, r); - v |= (1 << clk->enable_bit); - omap2_clk_writel(v, clk, r); -} - -/* XXX */ -void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk) -{ - u32 v; - void __iomem *r; - - r = (__force void __iomem *) - ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN)); - - v = omap2_clk_readl(clk, r); - v &= ~(1 << clk->enable_bit); - omap2_clk_writel(v, clk, r); -} - -/* Public data */ - -const struct clk_hw_omap_ops clkhwops_iclk = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, -}; - -const struct clk_hw_omap_ops clkhwops_iclk_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = omap2_clk_dflt_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - - - diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index a699d7169307..acb60ed17273 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -20,12 +20,11 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/bitops.h> -#include <linux/regmap.h> #include <linux/of_address.h> -#include <linux/bootmem.h> #include <asm/cpu.h> #include <trace/events/power.h> @@ -40,19 +39,8 @@ #include "cm-regbits-34xx.h" #include "common.h" -/* - * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait - * for a module to indicate that it is no longer in idle - */ -#define MAX_MODULE_ENABLE_WAIT 100000 - u16 cpu_mask; -/* - * Clock features setup. Used instead of CPU type checks. - */ -struct ti_clk_features ti_clk_features; - /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ #define OMAP3430_DPLL_FINT_BAND1_MIN 750000 #define OMAP3430_DPLL_FINT_BAND1_MAX 2100000 @@ -66,119 +54,24 @@ struct ti_clk_features ti_clk_features; #define OMAP3PLUS_DPLL_FINT_MIN 32000 #define OMAP3PLUS_DPLL_FINT_MAX 52000000 -/* - * clkdm_control: if true, then when a clock is enabled in the - * hardware, its clockdomain will first be enabled; and when a clock - * is disabled in the hardware, its clockdomain will be disabled - * afterwards. - */ -static bool clkdm_control = true; - -static LIST_HEAD(clk_hw_omap_clocks); - -struct clk_iomap { - struct regmap *regmap; - void __iomem *mem; -}; - -static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS]; - -static void clk_memmap_writel(u32 val, void __iomem *reg) -{ - struct clk_omap_reg *r = (struct clk_omap_reg *)® - struct clk_iomap *io = clk_memmaps[r->index]; - - if (io->regmap) - regmap_write(io->regmap, r->offset, val); - else - writel_relaxed(val, io->mem + r->offset); -} - -static u32 clk_memmap_readl(void __iomem *reg) -{ - u32 val; - struct clk_omap_reg *r = (struct clk_omap_reg *)® - struct clk_iomap *io = clk_memmaps[r->index]; - - if (io->regmap) - regmap_read(io->regmap, r->offset, &val); - else - val = readl_relaxed(io->mem + r->offset); - - return val; -} - -void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg) -{ - if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING))) - writel_relaxed(val, reg); - else - clk_memmap_writel(val, reg); -} - -u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg) -{ - if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING))) - return readl_relaxed(reg); - else - return clk_memmap_readl(reg); -} - static struct ti_clk_ll_ops omap_clk_ll_ops = { - .clk_readl = clk_memmap_readl, - .clk_writel = clk_memmap_writel, + .clkdm_clk_enable = clkdm_clk_enable, + .clkdm_clk_disable = clkdm_clk_disable, + .cm_wait_module_ready = omap_cm_wait_module_ready, + .cm_split_idlest_reg = cm_split_idlest_reg, }; /** - * omap2_clk_provider_init - initialize a clock provider - * @match_table: DT device table to match for devices to init - * @np: device node pointer for the this clock provider - * @index: index for the clock provider - + @syscon: syscon regmap pointer - * @mem: iomem pointer for the clock provider memory area, only used if - * syscon is not provided + * omap2_clk_setup_ll_ops - setup clock driver low-level ops * - * Initializes a clock provider module (CM/PRM etc.), registering - * the memory mapping at specified index and initializing the - * low level driver infrastructure. Returns 0 in success. + * Sets up clock driver low-level platform ops. These are needed + * for register accesses and various other misc platform operations. + * Returns 0 on success, -EBUSY if low level ops have been registered + * already. */ -int __init omap2_clk_provider_init(struct device_node *np, int index, - struct regmap *syscon, void __iomem *mem) +int __init omap2_clk_setup_ll_ops(void) { - struct clk_iomap *io; - - ti_clk_ll_ops = &omap_clk_ll_ops; - - io = kzalloc(sizeof(*io), GFP_KERNEL); - - io->regmap = syscon; - io->mem = mem; - - clk_memmaps[index] = io; - - ti_dt_clk_init_provider(np, index); - - return 0; -} - -/** - * omap2_clk_legacy_provider_init - initialize a legacy clock provider - * @index: index for the clock provider - * @mem: iomem pointer for the clock provider memory area - * - * Initializes a legacy clock provider memory mapping. - */ -void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem) -{ - struct clk_iomap *io; - - ti_clk_ll_ops = &omap_clk_ll_ops; - - io = memblock_virt_alloc(sizeof(*io), 0); - - io->mem = mem; - - clk_memmaps[index] = io; + return ti_clk_setup_ll_ops(&omap_clk_ll_ops); } /* @@ -187,77 +80,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem) /* Private functions */ - -/** - * _wait_idlest_generic - wait for a module to leave the idle state - * @clk: module clock to wait for (needed for register offsets) - * @reg: virtual address of module IDLEST register - * @mask: value to mask against to determine if the module is active - * @idlest: idle state indicator (0 or 1) for the clock - * @name: name of the clock (for printk) - * - * Wait for a module to leave idle, where its idle-status register is - * not inside the CM module. Returns 1 if the module left idle - * promptly, or 0 if the module did not leave idle before the timeout - * elapsed. XXX Deprecated - should be moved into drivers for the - * individual IP block that the IDLEST register exists in. - */ -static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg, - u32 mask, u8 idlest, const char *name) -{ - int i = 0, ena = 0; - - ena = (idlest) ? 0 : mask; - - omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena), - MAX_MODULE_ENABLE_WAIT, i); - - if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("omap clock: module associated with clock %s ready after %d loops\n", - name, i); - else - pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", - name, MAX_MODULE_ENABLE_WAIT); - - return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; -}; - -/** - * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE - * @clk: struct clk * belonging to the module - * - * If the necessary clocks for the OMAP hardware IP block that - * corresponds to clock @clk are enabled, then wait for the module to - * indicate readiness (i.e., to leave IDLE). This code does not - * belong in the clock code and will be moved in the medium term to - * module-dependent code. No return value. - */ -static void _omap2_module_wait_ready(struct clk_hw_omap *clk) -{ - void __iomem *companion_reg, *idlest_reg; - u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; - s16 prcm_mod; - int r; - - /* Not all modules have multiple clocks that their IDLEST depends on */ - if (clk->ops->find_companion) { - clk->ops->find_companion(clk, &companion_reg, &other_bit); - if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit))) - return; - } - - clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); - r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id); - if (r) { - /* IDLEST register not in the CM module */ - _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit), - idlest_val, __clk_get_name(clk->hw.clk)); - } else { - omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id, - idlest_bit); - }; -} - /* Public functions */ /** @@ -290,279 +112,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw) } } -/** - * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable - * - * Prevent the OMAP clock code from calling into the clockdomain code - * when a hardware clock in that clockdomain is enabled or disabled. - * Intended to be called at init time from omap*_clk_init(). No - * return value. - */ -void __init omap2_clk_disable_clkdm_control(void) -{ - clkdm_control = false; -} - -/** - * omap2_clk_dflt_find_companion - find companion clock to @clk - * @clk: struct clk * to find the companion clock of - * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in - * @other_bit: u8 ** to return the companion clock bit shift in - * - * Note: We don't need special code here for INVERT_ENABLE for the - * time being since INVERT_ENABLE only applies to clocks enabled by - * CM_CLKEN_PLL - * - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's - * just a matter of XORing the bits. - * - * Some clocks don't have companion clocks. For example, modules with - * only an interface clock (such as MAILBOXES) don't have a companion - * clock. Right now, this code relies on the hardware exporting a bit - * in the correct companion register that indicates that the - * nonexistent 'companion clock' is active. Future patches will - * associate this type of code with per-module data structures to - * avoid this issue, and remove the casts. No return value. - */ -void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, - void __iomem **other_reg, u8 *other_bit) -{ - u32 r; - - /* - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes - * it's just a matter of XORing the bits. - */ - r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); - - *other_reg = (__force void __iomem *)r; - *other_bit = clk->enable_bit; -} - -/** - * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk - * @clk: struct clk * to find IDLEST info for - * @idlest_reg: void __iomem ** to return the CM_IDLEST va in - * @idlest_bit: u8 * to return the CM_IDLEST bit shift in - * @idlest_val: u8 * to return the idle status indicator - * - * Return the CM_IDLEST register address and bit shift corresponding - * to the module that "owns" this clock. This default code assumes - * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that - * the IDLEST register address ID corresponds to the CM_*CLKEN - * register address ID (e.g., that CM_FCLKEN2 corresponds to - * CM_IDLEST2). This is not true for all modules. No return value. - */ -void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = clk->enable_bit; - - /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes - * AM35xx uses both, depending on the module. - */ - *idlest_val = ti_clk_features.cm_idlest_val; -} - -/** - * omap2_dflt_clk_enable - enable a clock in the hardware - * @hw: struct clk_hw * of the clock to enable - * - * Enable the clock @hw in the hardware. We first call into the OMAP - * clockdomain code to "enable" the corresponding clockdomain if this - * is the first enabled user of the clockdomain. Then program the - * hardware to enable the clock. Then wait for the IP block that uses - * this clock to leave idle (if applicable). Returns the error value - * from clkdm_clk_enable() if it terminated with an error, or -EINVAL - * if @hw has a null clock enable_reg, or zero upon success. - */ -int omap2_dflt_clk_enable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - u32 v; - int ret = 0; - - clk = to_clk_hw_omap(hw); - - if (clkdm_control && clk->clkdm) { - ret = clkdm_clk_enable(clk->clkdm, hw->clk); - if (ret) { - WARN(1, "%s: could not enable %s's clockdomain %s: %d\n", - __func__, __clk_get_name(hw->clk), - clk->clkdm->name, ret); - return ret; - } - } - - if (unlikely(clk->enable_reg == NULL)) { - pr_err("%s: %s missing enable_reg\n", __func__, - __clk_get_name(hw->clk)); - ret = -EINVAL; - goto err; - } - - /* FIXME should not have INVERT_ENABLE bit here */ - v = omap2_clk_readl(clk, clk->enable_reg); - if (clk->flags & INVERT_ENABLE) - v &= ~(1 << clk->enable_bit); - else - v |= (1 << clk->enable_bit); - omap2_clk_writel(v, clk, clk->enable_reg); - v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */ - - if (clk->ops && clk->ops->find_idlest) - _omap2_module_wait_ready(clk); - - return 0; - -err: - if (clkdm_control && clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); - return ret; -} - -/** - * omap2_dflt_clk_disable - disable a clock in the hardware - * @hw: struct clk_hw * of the clock to disable - * - * Disable the clock @hw in the hardware, and call into the OMAP - * clockdomain code to "disable" the corresponding clockdomain if all - * clocks/hwmods in that clockdomain are now disabled. No return - * value. - */ -void omap2_dflt_clk_disable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - u32 v; - - clk = to_clk_hw_omap(hw); - if (!clk->enable_reg) { - /* - * 'independent' here refers to a clock which is not - * controlled by its parent. - */ - pr_err("%s: independent clock %s has no enable_reg\n", - __func__, __clk_get_name(hw->clk)); - return; - } - - v = omap2_clk_readl(clk, clk->enable_reg); - if (clk->flags & INVERT_ENABLE) - v |= (1 << clk->enable_bit); - else - v &= ~(1 << clk->enable_bit); - omap2_clk_writel(v, clk, clk->enable_reg); - /* No OCP barrier needed here since it is a disable operation */ - - if (clkdm_control && clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); -} - -/** - * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw - * @hw: struct clk_hw * of the clock being enabled - * - * Increment the usecount of the clockdomain of the clock pointed to - * by @hw; if the usecount is 1, the clockdomain will be "enabled." - * Only needed for clocks that don't use omap2_dflt_clk_enable() as - * their enable function pointer. Passes along the return value of - * clkdm_clk_enable(), -EINVAL if @hw is not associated with a - * clockdomain, or 0 if clock framework-based clockdomain control is - * not implemented. - */ -int omap2_clkops_enable_clkdm(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - int ret = 0; - - clk = to_clk_hw_omap(hw); - - if (unlikely(!clk->clkdm)) { - pr_err("%s: %s: no clkdm set ?!\n", __func__, - __clk_get_name(hw->clk)); - return -EINVAL; - } - - if (unlikely(clk->enable_reg)) - pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__, - __clk_get_name(hw->clk)); - - if (!clkdm_control) { - pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n", - __func__, __clk_get_name(hw->clk)); - return 0; - } - - ret = clkdm_clk_enable(clk->clkdm, hw->clk); - WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n", - __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret); - - return ret; -} - -/** - * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw - * @hw: struct clk_hw * of the clock being disabled - * - * Decrement the usecount of the clockdomain of the clock pointed to - * by @hw; if the usecount is 0, the clockdomain will be "disabled." - * Only needed for clocks that don't use omap2_dflt_clk_disable() as their - * disable function pointer. No return value. - */ -void omap2_clkops_disable_clkdm(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - - clk = to_clk_hw_omap(hw); - - if (unlikely(!clk->clkdm)) { - pr_err("%s: %s: no clkdm set ?!\n", __func__, - __clk_get_name(hw->clk)); - return; - } - - if (unlikely(clk->enable_reg)) - pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__, - __clk_get_name(hw->clk)); - - if (!clkdm_control) { - pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n", - __func__, __clk_get_name(hw->clk)); - return; - } - - clkdm_clk_disable(clk->clkdm, hw->clk); -} - -/** - * omap2_dflt_clk_is_enabled - is clock enabled in the hardware? - * @hw: struct clk_hw * to check - * - * Return 1 if the clock represented by @hw is enabled in the - * hardware, or 0 otherwise. Intended for use in the struct - * clk_ops.is_enabled function pointer. - */ -int omap2_dflt_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; - - v = omap2_clk_readl(clk, clk->enable_reg); - - if (clk->flags & INVERT_ENABLE) - v ^= BIT(clk->enable_bit); - - v &= BIT(clk->enable_bit); - - return v ? 1 : 0; -} - static int __initdata mpurate; /* @@ -584,178 +133,6 @@ static int __init omap_clk_setup(char *str) __setup("mpurate=", omap_clk_setup); /** - * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock - * @clk: struct clk * to initialize - * - * Add an OMAP clock @clk to the internal list of OMAP clocks. Used - * temporarily for autoidle handling, until this support can be - * integrated into the common clock framework code in some way. No - * return value. - */ -void omap2_init_clk_hw_omap_clocks(struct clk *clk) -{ - struct clk_hw_omap *c; - - if (__clk_get_flags(clk) & CLK_IS_BASIC) - return; - - c = to_clk_hw_omap(__clk_get_hw(clk)); - list_add(&c->node, &clk_hw_omap_clocks); -} - -/** - * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that - * support it - * - * Enable clock autoidle on all OMAP clocks that have allow_idle - * function pointers associated with them. This function is intended - * to be temporary until support for this is added to the common clock - * code. Returns 0. - */ -int omap2_clk_enable_autoidle_all(void) -{ - struct clk_hw_omap *c; - - list_for_each_entry(c, &clk_hw_omap_clocks, node) - if (c->ops && c->ops->allow_idle) - c->ops->allow_idle(c); - - of_ti_clk_allow_autoidle_all(); - - return 0; -} - -/** - * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that - * support it - * - * Disable clock autoidle on all OMAP clocks that have allow_idle - * function pointers associated with them. This function is intended - * to be temporary until support for this is added to the common clock - * code. Returns 0. - */ -int omap2_clk_disable_autoidle_all(void) -{ - struct clk_hw_omap *c; - - list_for_each_entry(c, &clk_hw_omap_clocks, node) - if (c->ops && c->ops->deny_idle) - c->ops->deny_idle(c); - - of_ti_clk_deny_autoidle_all(); - - return 0; -} - -/** - * omap2_clk_deny_idle - disable autoidle on an OMAP clock - * @clk: struct clk * to disable autoidle for - * - * Disable autoidle on an OMAP clock. - */ -int omap2_clk_deny_idle(struct clk *clk) -{ - struct clk_hw_omap *c; - - if (__clk_get_flags(clk) & CLK_IS_BASIC) - return -EINVAL; - - c = to_clk_hw_omap(__clk_get_hw(clk)); - if (c->ops && c->ops->deny_idle) - c->ops->deny_idle(c); - return 0; -} - -/** - * omap2_clk_allow_idle - enable autoidle on an OMAP clock - * @clk: struct clk * to enable autoidle for - * - * Enable autoidle on an OMAP clock. - */ -int omap2_clk_allow_idle(struct clk *clk) -{ - struct clk_hw_omap *c; - - if (__clk_get_flags(clk) & CLK_IS_BASIC) - return -EINVAL; - - c = to_clk_hw_omap(__clk_get_hw(clk)); - if (c->ops && c->ops->allow_idle) - c->ops->allow_idle(c); - return 0; -} - -/** - * omap2_clk_enable_init_clocks - prepare & enable a list of clocks - * @clk_names: ptr to an array of strings of clock names to enable - * @num_clocks: number of clock names in @clk_names - * - * Prepare and enable a list of clocks, named by @clk_names. No - * return value. XXX Deprecated; only needed until these clocks are - * properly claimed and enabled by the drivers or core code that uses - * them. XXX What code disables & calls clk_put on these clocks? - */ -void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks) -{ - struct clk *init_clk; - int i; - - for (i = 0; i < num_clocks; i++) { - init_clk = clk_get(NULL, clk_names[i]); - if (WARN(IS_ERR(init_clk), "could not find init clock %s\n", - clk_names[i])) - continue; - clk_prepare_enable(init_clk); - } -} - -const struct clk_hw_omap_ops clkhwops_wait = { - .find_idlest = omap2_clk_dflt_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -/** - * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument - * @mpurate_ck_name: clk name of the clock to change rate - * - * Change the ARM MPU clock rate to the rate specified on the command - * line, if one was specified. @mpurate_ck_name should be - * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx. - * XXX Does not handle voltage scaling - on OMAP2xxx this is currently - * handled by the virt_prcm_set clock, but this should be handled by - * the OPP layer. XXX This is intended to be handled by the OPP layer - * code in the near future and should be removed from the clock code. - * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects - * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name - * cannot be found, or 0 upon success. - */ -int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name) -{ - struct clk *mpurate_ck; - int r; - - if (!mpurate) - return -EINVAL; - - mpurate_ck = clk_get(NULL, mpurate_ck_name); - if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name)) - return -ENOENT; - - r = clk_set_rate(mpurate_ck, mpurate); - if (r < 0) { - WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n", - mpurate_ck_name, mpurate, r); - clk_put(mpurate_ck); - return -EINVAL; - } - - calibrate_delay(); - clk_put(mpurate_ck); - - return 0; -} - -/** * omap2_clk_print_new_rates - print summary of current clock tree rates * @hfclkin_ck_name: clk name for the off-chip HF oscillator * @core_ck_name: clk name for the on-chip CORE_CLK @@ -801,29 +178,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, */ void __init ti_clk_init_features(void) { + struct ti_clk_features features = { 0 }; /* Fint setup for DPLLs */ if (cpu_is_omap3430()) { - ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; - ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; - ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX; - ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN; + features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; + features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; + features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX; + features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN; } else { - ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN; - ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX; + features.fint_min = OMAP3PLUS_DPLL_FINT_MIN; + features.fint_max = OMAP3PLUS_DPLL_FINT_MAX; } /* Bypass value setup for DPLLs */ if (cpu_is_omap24xx()) { - ti_clk_features.dpll_bypass_vals |= + features.dpll_bypass_vals |= (1 << OMAP2XXX_EN_DPLL_LPBYPASS) | (1 << OMAP2XXX_EN_DPLL_FRBYPASS); } else if (cpu_is_omap34xx()) { - ti_clk_features.dpll_bypass_vals |= + features.dpll_bypass_vals |= (1 << OMAP3XXX_EN_DPLL_LPBYPASS) | (1 << OMAP3XXX_EN_DPLL_FRBYPASS); } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() || soc_is_omap54xx() || soc_is_dra7xx()) { - ti_clk_features.dpll_bypass_vals |= + features.dpll_bypass_vals |= (1 << OMAP4XXX_EN_DPLL_LPBYPASS) | (1 << OMAP4XXX_EN_DPLL_FRBYPASS) | (1 << OMAP4XXX_EN_DPLL_MNBYPASS); @@ -831,7 +209,7 @@ void __init ti_clk_init_features(void) /* Jitter correction only available on OMAP343X */ if (cpu_is_omap343x()) - ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL; + features.flags |= TI_CLK_DPLL_HAS_FREQSEL; /* Idlest value for interface clocks. * 24xx uses 0 to indicate not ready, and 1 to indicate ready. @@ -839,11 +217,13 @@ void __init ti_clk_init_features(void) * AM35xx uses both, depending on the module. */ if (cpu_is_omap24xx()) - ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; + features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; else if (cpu_is_omap34xx()) - ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; + features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */ if (omap_rev() == OMAP3430_REV_ES1_0) - ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; + features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; + + ti_clk_setup_features(&features); } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 652ed0ab86ec..67da640ba1c7 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -23,90 +23,6 @@ #include <linux/clk-provider.h> #include <linux/clk/ti.h> -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck) \ - { \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -struct clockdomain; - -#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \ - static struct clk_core _name##_core = { \ - .name = #_name, \ - .hw = &_name##_hw.hw, \ - .parent_names = _parent_array_name, \ - .num_parents = ARRAY_SIZE(_parent_array_name), \ - .ops = &_clkops_name, \ - }; \ - static struct clk _name = { \ - .core = &_name##_core, \ - }; - -#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \ - _clkops_name, _flags) \ - static struct clk_core _name##_core = { \ - .name = #_name, \ - .hw = &_name##_hw.hw, \ - .parent_names = _parent_array_name, \ - .num_parents = ARRAY_SIZE(_parent_array_name), \ - .ops = &_clkops_name, \ - .flags = _flags, \ - }; \ - static struct clk _name = { \ - .core = &_name##_core, \ - }; - -#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \ - static struct clk_hw_omap _name##_hw = { \ - .hw = { \ - .clk = &_name, \ - }, \ - .clkdm_name = _clkdm_name, \ - }; - -#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel, \ - _clksel_reg, _clksel_mask, \ - _parent_names, _ops) \ - static struct clk _name; \ - static struct clk_hw_omap _name##_hw = { \ - .hw = { \ - .clk = &_name, \ - }, \ - .clksel = _clksel, \ - .clksel_reg = _clksel_reg, \ - .clksel_mask = _clksel_mask, \ - .clkdm_name = _clkdm_name, \ - }; \ - DEFINE_STRUCT_CLK(_name, _parent_names, _ops); - -#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel, \ - _clksel_reg, _clksel_mask, \ - _enable_reg, _enable_bit, \ - _hwops, _parent_names, _ops) \ - static struct clk _name; \ - static struct clk_hw_omap _name##_hw = { \ - .hw = { \ - .clk = &_name, \ - }, \ - .ops = _hwops, \ - .enable_reg = _enable_reg, \ - .enable_bit = _enable_bit, \ - .clksel = _clksel, \ - .clksel_reg = _clksel_reg, \ - .clksel_mask = _clksel_mask, \ - .clkdm_name = _clkdm_name, \ - }; \ - DEFINE_STRUCT_CLK(_name, _parent_names, _ops); - /* struct clksel_rate.flags possibilities */ #define RATE_IN_242X (1 << 0) #define RATE_IN_243X (1 << 1) @@ -127,38 +43,6 @@ struct clockdomain; /* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ #define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) - -/** - * struct clksel_rate - register bitfield values corresponding to clk divisors - * @val: register bitfield value (shifted to bit 0) - * @div: clock divisor corresponding to @val - * @flags: (see "struct clksel_rate.flags possibilities" above) - * - * @val should match the value of a read from struct clk.clksel_reg - * AND'ed with struct clk.clksel_mask, shifted right to bit 0. - * - * @div is the divisor that should be applied to the parent clock's rate - * to produce the current clock's rate. - */ -struct clksel_rate { - u32 val; - u8 div; - u16 flags; -}; - -/** - * struct clksel - available parent clocks, and a pointer to their divisors - * @parent: struct clk * to a possible parent clock - * @rates: available divisors for this parent clock - * - * A struct clksel is always associated with one or more struct clks - * and one or more struct clksel_rates. - */ -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */ #define CORE_CLK_SRC_32K 0x0 #define CORE_CLK_SRC_DPLL 0x1 @@ -180,105 +64,18 @@ struct clksel { #define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP4XXX_EN_DPLL_LOCKED 0x7 -u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); -void omap3_dpll_allow_idle(struct clk_hw_omap *clk); -void omap3_dpll_deny_idle(struct clk_hw_omap *clk); -void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk); -void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk); - -void __init omap2_clk_disable_clkdm_control(void); - -/* clkt_clksel.c public functions */ -u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk, - unsigned long target_rate, - u32 *new_div); -u8 omap2_clksel_find_parent_index(struct clk_hw *hw); -unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate); -long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate, - unsigned long *parent_rate); -int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate); -int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val); - -/* clkt_iclk.c public functions */ -extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk); -extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk); - -unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk); - -void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, - void __iomem **other_reg, - u8 *other_bit); -void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, u8 *idlest_val); -int omap2_clk_enable_autoidle_all(void); -int omap2_clk_allow_idle(struct clk *clk); -int omap2_clk_deny_idle(struct clk *clk); -int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name); void omap2_clk_print_new_rates(const char *hfclkin_ck_name, const char *core_ck_name, const char *mpu_ck_name); -u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg); -void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg); - extern u16 cpu_mask; -/* - * Clock features setup. Used instead of CPU type checks. - */ -struct ti_clk_features { - u32 flags; - long fint_min; - long fint_max; - long fint_band1_max; - long fint_band2_min; - u8 dpll_bypass_vals; - u8 cm_idlest_val; -}; - -#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0) -#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1) - -extern struct ti_clk_features ti_clk_features; - extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; extern struct clk_functions omap2_clk_functions; -extern const struct clksel_rate gpt_32k_rates[]; -extern const struct clksel_rate gpt_sys_rates[]; -extern const struct clksel_rate gfx_l3_rates[]; -extern const struct clksel_rate dsp_ick_rates[]; - -extern const struct clk_hw_omap_ops clkhwops_iclk_wait; -extern const struct clk_hw_omap_ops clkhwops_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; -extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; -extern const struct clk_hw_omap_ops clkhwops_apll54; -extern const struct clk_hw_omap_ops clkhwops_apll96; - -/* clksel_rate blocks shared between OMAP44xx and AM33xx */ -extern const struct clksel_rate div_1_0_rates[]; -extern const struct clksel_rate div3_1to4_rates[]; -extern const struct clksel_rate div_1_1_rates[]; -extern const struct clksel_rate div_1_2_rates[]; -extern const struct clksel_rate div_1_3_rates[]; -extern const struct clksel_rate div_1_4_rates[]; -extern const struct clksel_rate div31_1to31_rates[]; - -extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); -extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); - -struct regmap; - -int __init omap2_clk_provider_init(struct device_node *np, int index, - struct regmap *syscon, void __iomem *mem); -void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem); +int __init omap2_clk_setup_ll_ops(void); void __init ti_clk_init_features(void); #endif diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c deleted file mode 100644 index cef0c8d1de52..000000000000 --- a/arch/arm/mach-omap2/clock2430.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * clock2430.c - OMAP2430-specific clock integration code - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "soc.h" -#include "iomap.h" -#include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx.h" -#include "cm-regbits-24xx.h" - -/** - * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the - * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function - * passes back the correct CM_IDLEST register address for I2CHS - * modules. No return value. - */ -static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - *idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST); - *idlest_bit = clk->enable_bit; - *idlest_val = OMAP24XX_CM_IDLEST_VAL; -} - -/* 2430 I2CHS has non-standard IDLEST register */ -const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = { - .find_idlest = omap2430_clk_i2chs_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c deleted file mode 100644 index b870f6a9e283..000000000000 --- a/arch/arm/mach-omap2/clock2xxx.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * clock2xxx.c - OMAP2xxx-specific clock integration code - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "soc.h" -#include "clock.h" -#include "clock2xxx.h" -#include "cm.h" -#include "cm-regbits-24xx.h" - -struct clk_hw *dclk_hw; -/* - * Omap24xx specific clock functions - */ - -/* - * Switch the MPU rate if specified on cmdline. We cannot do this - * early until cmdline is parsed. XXX This should be removed from the - * clock code and handled by the OPP layer code in the near future. - */ -static int __init omap2xxx_clk_arch_init(void) -{ - int ret; - - if (!cpu_is_omap24xx()) - return 0; - - ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set"); - if (!ret) - omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck"); - - return ret; -} - -omap_arch_initcall(omap2xxx_clk_arch_init); - - diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c deleted file mode 100644 index 4596468e50ab..000000000000 --- a/arch/arm/mach-omap2/clock34xx.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * OMAP3-specific clock framework functions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2011 Nokia Corporation - * - * Paul Walmsley - * Jouni Högander - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, - * Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock34xx.h" -#include "cm3xxx.h" -#include "cm-regbits-34xx.h" - -/** - * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift - * from the CM_{I,F}CLKEN bit. Pass back the correct info via - * @idlest_reg and @idlest_bit. No return value. - */ -static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; - *idlest_val = OMAP34XX_CM_IDLEST_VAL; -} -const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = { - .find_idlest = omap3430es2_clk_ssi_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = omap3430es2_clk_ssi_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -/** - * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * Some OMAP modules on OMAP3 ES2+ chips have both initiator and - * target IDLEST bits. For our purposes, we are concerned with the - * target IDLEST bits, which exist at a different bit position than - * the *CLKEN bit position for these modules (DSS and USBHOST) (The - * default find_idlest code assumes that they are at the same - * position.) No return value. - */ -static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - /* USBHOST_IDLE has same shift */ - *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; - *idlest_val = OMAP34XX_CM_IDLEST_VAL; -} - -const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = { - .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -/** - * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different - * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via - * @idlest_reg and @idlest_bit. No return value. - */ -static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; - *idlest_val = OMAP34XX_CM_IDLEST_VAL; -} - -const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = { - .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h deleted file mode 100644 index 084ba71b2b31..000000000000 --- a/arch/arm/mach-omap2/clock34xx.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * OMAP34xx clock function prototypes and macros - * - * Copyright (C) 2007-2010 Texas Instruments, Inc. - * Copyright (C) 2007-2011 Nokia Corporation - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H - -extern const struct clkops clkops_omap3430es2_ssi_wait; -extern const struct clkops clkops_omap3430es2_iclk_ssi_wait; -extern const struct clkops clkops_omap3430es2_hsotgusb_wait; -extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait; -extern const struct clkops clkops_omap3430es2_dss_usbhost_wait; -extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait; - -#endif diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c deleted file mode 100644 index 4d79ae2c0241..000000000000 --- a/arch/arm/mach-omap2/clock3517.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * OMAP3517/3505-specific clock framework functions - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2011 Nokia Corporation - * - * Ranjith Lohithakshan - * Paul Walmsley - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, - * Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock3517.h" -#include "cm3xxx.h" -#include "cm-regbits-34xx.h" - -/* - * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported - * in the same register at a bit offset of 0x8. The EN_ACK for ICK is - * at an offset of 4 from ICK enable bit. - */ -#define AM35XX_IPSS_ICK_MASK 0xF -#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4 -#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8 -#define AM35XX_IPSS_CLK_IDLEST_VAL 0 - -/** - * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * The interface clocks on AM35xx IPSS reflects the clock idle status - * in the enable register itsel at a bit offset of 4 from the enable - * bit. A value of 1 indicates that clock is enabled. - */ -static void am35xx_clk_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - *idlest_reg = (__force void __iomem *)(clk->enable_reg); - *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET; - *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL; -} - -/** - * am35xx_clk_find_companion - find companion clock to @clk - * @clk: struct clk * to find the companion clock of - * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in - * @other_bit: u8 ** to return the companion clock bit shift in - * - * Some clocks don't have companion clocks. For example, modules with - * only an interface clock (such as HECC) don't have a companion - * clock. Right now, this code relies on the hardware exporting a bit - * in the correct companion register that indicates that the - * nonexistent 'companion clock' is active. Future patches will - * associate this type of code with per-module data structures to - * avoid this issue, and remove the casts. No return value. - */ -static void am35xx_clk_find_companion(struct clk_hw_omap *clk, - void __iomem **other_reg, - u8 *other_bit) -{ - *other_reg = (__force void __iomem *)(clk->enable_reg); - if (clk->enable_bit & AM35XX_IPSS_ICK_MASK) - *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET; - else - *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET; -} -const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = { - .find_idlest = am35xx_clk_find_idlest, - .find_companion = am35xx_clk_find_companion, -}; - -/** - * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * The IPSS target CM_IDLEST bit is at a different shift from the - * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg - * and @idlest_bit. No return value. - */ -static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = AM35XX_ST_IPSS_SHIFT; - *idlest_val = OMAP34XX_CM_IDLEST_VAL; -} - -const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = am35xx_clk_ipss_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h deleted file mode 100644 index ca5e5a64c2e2..000000000000 --- a/arch/arm/mach-omap2/clock3517.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * OMAP3517/3505 clock function prototypes and macros - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H - -extern const struct clkops clkops_am35xx_ipss_module_wait; -extern const struct clkops clkops_am35xx_ipss_wait; - -#endif diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c deleted file mode 100644 index 91ccb962e09e..000000000000 --- a/arch/arm/mach-omap2/clock36xx.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * OMAP36xx-specific clkops - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation - * - * Mike Turquette - * Vijaykumar GN - * Paul Walmsley - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, - * Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock36xx.h" -#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) - -/** - * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering - * from HSDivider PWRDN problem Implements Errata ID: i556. - * @clk: DPLL output struct clk - * - * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck, - * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset - * valueafter their respective PWRDN bits are set. Any dummy write - * (Any other value different from the Read value) to the - * corresponding CM_CLKSEL register will refresh the dividers. - */ -int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk) -{ - struct clk_divider *parent; - struct clk_hw *parent_hw; - u32 dummy_v, orig_v; - struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk); - int ret; - - /* Clear PWRDN bit of HSDIVIDER */ - ret = omap2_dflt_clk_enable(clk); - - parent_hw = __clk_get_hw(__clk_get_parent(clk->clk)); - parent = to_clk_divider(parent_hw); - - /* Restore the dividers */ - if (!ret) { - orig_v = omap2_clk_readl(omap_clk, parent->reg); - dummy_v = orig_v; - - /* Write any other value different from the Read value */ - dummy_v ^= (1 << parent->shift); - omap2_clk_writel(dummy_v, omap_clk, parent->reg); - - /* Write the original divider */ - omap2_clk_writel(orig_v, omap_clk, parent->reg); - } - - return ret; -} diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h deleted file mode 100644 index 945bb7f083e9..000000000000 --- a/arch/arm/mach-omap2/clock36xx.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * OMAP36xx clock function prototypes and macros - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H - -extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw); - -#endif diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c deleted file mode 100644 index a9e86db5daf9..000000000000 --- a/arch/arm/mach-omap2/clock3xxx.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * OMAP3-specific clock framework functions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2010 Nokia Corporation - * - * Paul Walmsley - * Jouni Högander - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "soc.h" -#include "clock.h" -#include "clock3xxx.h" -#include "prm2xxx_3xxx.h" -#include "prm-regbits-34xx.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-34xx.h" - -/* - * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks - * that are sourced by DPLL5, and both of these require this clock - * to be at 120 MHz for proper operation. - */ -#define DPLL5_FREQ_FOR_USBHOST 120000000 - -/* needed by omap3_core_dpll_m2_set_rate() */ -struct clk *sdrc_ick_p, *arm_fck_p; - -/** - * omap3_dpll4_set_rate - set rate for omap3 per-dpll - * @hw: clock to change - * @rate: target rate for clock - * @parent_rate: rate of the parent clock - * - * Check if the current SoC supports the per-dpll reprogram operation - * or not, and then do the rate change if supported. Returns -EINVAL - * if not supported, 0 for success, and potential error codes from the - * clock rate change. - */ -int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - /* - * According to the 12-5 CDP code from TI, "Limitation 2.5" - * on 3430ES1 prevents us from changing DPLL multipliers or dividers - * on DPLL4. - */ - if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { - pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); - return -EINVAL; - } - - return omap3_noncore_dpll_set_rate(hw, rate, parent_rate); -} - -/** - * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll - * @hw: clock to change - * @rate: target rate for clock - * @parent_rate: rate of the parent clock - * @index: parent index, 0 - reference clock, 1 - bypass clock - * - * Check if the current SoC support the per-dpll reprogram operation - * or not, and then do the rate + parent change if supported. Returns - * -EINVAL if not supported, 0 for success, and potential error codes - * from the clock rate change. - */ -int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate, u8 index) -{ - if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { - pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); - return -EINVAL; - } - - return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate, - index); -} - -void __init omap3_clk_lock_dpll5(void) -{ - struct clk *dpll5_clk; - struct clk *dpll5_m2_clk; - - dpll5_clk = clk_get(NULL, "dpll5_ck"); - clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); - clk_prepare_enable(dpll5_clk); - - /* Program dpll5_m2_clk divider for no division */ - dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); - clk_prepare_enable(dpll5_m2_clk); - clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST); - - clk_disable_unprepare(dpll5_m2_clk); - clk_disable_unprepare(dpll5_clk); - return; -} - -/* Common clock code */ - -/* - * Switch the MPU rate if specified on cmdline. We cannot do this - * early until cmdline is parsed. XXX This should be removed from the - * clock code and handled by the OPP layer code in the near future. - */ -static int __init omap3xxx_clk_arch_init(void) -{ - int ret; - - if (!cpu_is_omap34xx()) - return 0; - - ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck"); - if (!ret) - omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck"); - - return ret; -} - -omap_arch_initcall(omap3xxx_clk_arch_init); - - diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h deleted file mode 100644 index 287a46f78d97..000000000000 --- a/arch/arm/mach-omap2/clock44xx.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * OMAP4 clock function prototypes and macros - * - * Copyright (C) 2009 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H - -/* - * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is - * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM - * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters") - */ -#define OMAP4430_REGM4XEN_MULT 4 - -int omap4xxx_clk_init(void); - -#endif diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c deleted file mode 100644 index 61b60dfb14ce..000000000000 --- a/arch/arm/mach-omap2/clock_common_data.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/clock_common_data.c - * - * Copyright (C) 2005-2009 Texas Instruments, Inc. - * Copyright (C) 2004-2009 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains clock data that is common to both the OMAP2xxx and - * OMAP3xxx clock definition files. - */ - -#include "clock.h" - -/* clksel_rate data common to 24xx/343x */ -const struct clksel_rate gpt_32k_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX }, - { .div = 0 } -}; - -const struct clksel_rate gpt_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX }, - { .div = 0 } -}; - -const struct clksel_rate gfx_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX }, - { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX }, - { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX }, - { .div = 0 } -}; - -const struct clksel_rate dsp_ick_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX }, - { .div = 3, .val = 3, .flags = RATE_IN_243X }, - { .div = 0 }, -}; - - -/* clksel_rate blocks shared between OMAP44xx and AM33xx */ - -const struct clksel_rate div_1_0_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div3_1to4_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_4430 }, - { .div = 2, .val = 1, .flags = RATE_IN_4430 }, - { .div = 4, .val = 2, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -const struct clksel_rate div_1_1_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div_1_2_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div_1_3_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div_1_4_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div31_1to31_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 77bab5fb6814..2c398ce1a0f2 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -216,7 +216,8 @@ extern void __init omap242x_clockdomains_init(void); extern void __init omap243x_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); extern void __init am33xx_clockdomains_init(void); -extern void __init ti81xx_clockdomains_init(void); +extern void __init ti814x_clockdomains_init(void); +extern void __init ti816x_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); extern void __init omap54xx_clockdomains_init(void); extern void __init dra7xx_clockdomains_init(void); diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c index 57d5df0c1fbd..7581e036bda6 100644 --- a/arch/arm/mach-omap2/clockdomains7xx_data.c +++ b/arch/arm/mach-omap2/clockdomains7xx_data.c @@ -331,7 +331,7 @@ static struct clockdomain l4per2_7xx_clkdm = { .dep_bit = DRA7XX_L4PER2_STATDEP_SHIFT, .wkdep_srcs = l4per2_wkup_sleep_deps, .sleepdep_srcs = l4per2_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain mpu0_7xx_clkdm = { diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c index ce2a82001d0d..53442c86a820 100644 --- a/arch/arm/mach-omap2/clockdomains81xx_data.c +++ b/arch/arm/mach-omap2/clockdomains81xx_data.c @@ -165,7 +165,24 @@ static struct clockdomain default_l3_slow_816x_clkdm = { .flags = CLKDM_CAN_SWSUP, }; -static struct clockdomain *clockdomains_ti81xx[] __initdata = { +static struct clockdomain *clockdomains_ti814x[] __initdata = { + &alwon_l3_slow_81xx_clkdm, + &alwon_l3_med_81xx_clkdm, + &alwon_l3_fast_81xx_clkdm, + &alwon_ethernet_81xx_clkdm, + &mmu_81xx_clkdm, + &mmu_cfg_81xx_clkdm, + NULL, +}; + +void __init ti814x_clockdomains_init(void) +{ + clkdm_register_platform_funcs(&am33xx_clkdm_operations); + clkdm_register_clkdms(clockdomains_ti814x); + clkdm_complete_init(); +} + +static struct clockdomain *clockdomains_ti816x[] __initdata = { &alwon_mpu_816x_clkdm, &alwon_l3_slow_81xx_clkdm, &alwon_l3_med_81xx_clkdm, @@ -185,10 +202,10 @@ static struct clockdomain *clockdomains_ti81xx[] __initdata = { NULL, }; -void __init ti81xx_clockdomains_init(void) +void __init ti816x_clockdomains_init(void) { clkdm_register_platform_funcs(&am33xx_clkdm_operations); - clkdm_register_clkdms(clockdomains_ti81xx); + clkdm_register_clkdms(clockdomains_ti816x); clkdm_complete_init(); } #endif diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index eae6a0e87c90..484cdadfb187 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -30,4 +30,5 @@ int __weak omap_secure_ram_reserve_memblock(void) void __init omap_reserve(void) { omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index cf3cf22ecd42..92e92cfc2775 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -189,6 +189,15 @@ static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd) } #endif +#ifdef CONFIG_OMAP_INTERCONNECT_BARRIER +void omap_barrier_reserve_memblock(void); +void omap_barriers_init(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ +} +#endif + /* This gets called from mach-omap2/io.c, do not call this */ void __init omap2_set_globals_tap(u32 class, void __iomem *tap); @@ -198,6 +207,7 @@ void __init omap3_map_io(void); void __init am33xx_map_io(void); void __init omap4_map_io(void); void __init omap5_map_io(void); +void __init dra7xx_map_io(void); void __init ti81xx_map_io(void); /** diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index f008930277ed..cf5855174c93 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -652,6 +652,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = { { .compatible = "ti,am4-scm", .data = &ctrl_data }, { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, + { .compatible = "ti,dm814-scm", .data = &ctrl_data }, { .compatible = "ti,dm816-scrm", .data = &ctrl_data }, { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, { .compatible = "ti,omap5-scm-core", .data = &ctrl_data }, diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c deleted file mode 100644 index 44e57ec225d4..000000000000 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ /dev/null @@ -1,818 +0,0 @@ -/* - * OMAP3/4 - specific DPLL control functions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Written by Paul Walmsley - * Testing and integration fixes by Jouni Högander - * - * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth - * Menon - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/bitops.h> -#include <linux/clkdev.h> - -#include "clockdomain.h" -#include "clock.h" - -/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ -#define DPLL_AUTOIDLE_DISABLE 0x0 -#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 - -#define MAX_DPLL_WAIT_TRIES 1000000 - -/* Private functions */ - -/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ -static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits) -{ - const struct dpll_data *dd; - u32 v; - - dd = clk->dpll_data; - - v = omap2_clk_readl(clk, dd->control_reg); - v &= ~dd->enable_mask; - v |= clken_bits << __ffs(dd->enable_mask); - omap2_clk_writel(v, clk, dd->control_reg); -} - -/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ -static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state) -{ - const struct dpll_data *dd; - int i = 0; - int ret = -EINVAL; - const char *clk_name; - - dd = clk->dpll_data; - clk_name = __clk_get_name(clk->hw.clk); - - state <<= __ffs(dd->idlest_mask); - - while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) - != state) && i < MAX_DPLL_WAIT_TRIES) { - i++; - udelay(1); - } - - if (i == MAX_DPLL_WAIT_TRIES) { - printk(KERN_ERR "clock: %s failed transition to '%s'\n", - clk_name, (state) ? "locked" : "bypassed"); - } else { - pr_debug("clock: %s transition to '%s' in %d loops\n", - clk_name, (state) ? "locked" : "bypassed", i); - - ret = 0; - } - - return ret; -} - -/* From 3430 TRM ES2 4.7.6.2 */ -static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n) -{ - unsigned long fint; - u16 f = 0; - - fint = __clk_get_rate(clk->dpll_data->clk_ref) / n; - - pr_debug("clock: fint is %lu\n", fint); - - if (fint >= 750000 && fint <= 1000000) - f = 0x3; - else if (fint > 1000000 && fint <= 1250000) - f = 0x4; - else if (fint > 1250000 && fint <= 1500000) - f = 0x5; - else if (fint > 1500000 && fint <= 1750000) - f = 0x6; - else if (fint > 1750000 && fint <= 2100000) - f = 0x7; - else if (fint > 7500000 && fint <= 10000000) - f = 0xB; - else if (fint > 10000000 && fint <= 12500000) - f = 0xC; - else if (fint > 12500000 && fint <= 15000000) - f = 0xD; - else if (fint > 15000000 && fint <= 17500000) - f = 0xE; - else if (fint > 17500000 && fint <= 21000000) - f = 0xF; - else - pr_debug("clock: unknown freqsel setting for %d\n", n); - - return f; -} - -/* - * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report - * readiness before returning. Will save and restore the DPLL's - * autoidle state across the enable, per the CDP code. If the DPLL - * locked successfully, return 0; if the DPLL did not lock in the time - * allotted, or DPLL3 was passed in, return -EINVAL. - */ -static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk) -{ - const struct dpll_data *dd; - u8 ai; - u8 state = 1; - int r = 0; - - pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk)); - - dd = clk->dpll_data; - state <<= __ffs(dd->idlest_mask); - - /* Check if already locked */ - if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state) - goto done; - - ai = omap3_dpll_autoidle_read(clk); - - if (ai) - omap3_dpll_deny_idle(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOCKED); - - r = _omap3_wait_dpll_status(clk, 1); - - if (ai) - omap3_dpll_allow_idle(clk); - -done: - return r; -} - -/* - * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power bypass mode. In - * bypass mode, the DPLL's rate is set equal to its parent clock's - * rate. Waits for the DPLL to report readiness before returning. - * Will save and restore the DPLL's autoidle state across the enable, - * per the CDP code. If the DPLL entered bypass mode successfully, - * return 0; if the DPLL did not enter bypass in the time allotted, or - * DPLL3 was passed in, or the DPLL does not support low-power bypass, - * return -EINVAL. - */ -static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk) -{ - int r; - u8 ai; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) - return -EINVAL; - - pr_debug("clock: configuring DPLL %s for low-power bypass\n", - __clk_get_name(clk->hw.clk)); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); - - r = _omap3_wait_dpll_status(clk, 0); - - if (ai) - omap3_dpll_allow_idle(clk); - - return r; -} - -/* - * _omap3_noncore_dpll_stop - instruct a DPLL to stop - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power stop. Will save and - * restore the DPLL's autoidle state across the stop, per the CDP - * code. If DPLL3 was passed in, or the DPLL does not support - * low-power stop, return -EINVAL; otherwise, return 0. - */ -static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk) -{ - u8 ai; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) - return -EINVAL; - - pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk)); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); - - if (ai) - omap3_dpll_allow_idle(clk); - - return 0; -} - -/** - * _lookup_dco - Lookup DCO used by j-type DPLL - * @clk: pointer to a DPLL struct clk - * @dco: digital control oscillator selector - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * - * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)" - * - * XXX This code is not needed for 3430/AM35xx; can it be optimized - * out in non-multi-OMAP builds for those chips? - */ -static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n) -{ - unsigned long fint, clkinp; /* watch out for overflow */ - - clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk)); - fint = (clkinp / n) * m; - - if (fint < 1000000000) - *dco = 2; - else - *dco = 4; -} - -/** - * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL - * @clk: pointer to a DPLL struct clk - * @sd_div: target sigma-delta divider - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * - * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)" - * - * XXX This code is not needed for 3430/AM35xx; can it be optimized - * out in non-multi-OMAP builds for those chips? - */ -static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) -{ - unsigned long clkinp, sd; /* watch out for overflow */ - int mod1, mod2; - - clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk)); - - /* - * target sigma-delta to near 250MHz - * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)] - */ - clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */ - mod1 = (clkinp * m) % (250 * n); - sd = (clkinp * m) / (250 * n); - mod2 = sd % 10; - sd /= 10; - - if (mod1 || mod2) - sd++; - *sd_div = sd; -} - -/* - * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly - * @clk: struct clk * of DPLL to set - * @freqsel: FREQSEL value to set - * - * Program the DPLL with the last M, N values calculated, and wait for - * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success. - */ -static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) -{ - struct dpll_data *dd = clk->dpll_data; - u8 dco, sd_div; - u32 v; - - /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ - _omap3_noncore_dpll_bypass(clk); - - /* - * Set jitter correction. Jitter correction applicable for OMAP343X - * only since freqsel field is no longer present on other devices. - */ - if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { - v = omap2_clk_readl(clk, dd->control_reg); - v &= ~dd->freqsel_mask; - v |= freqsel << __ffs(dd->freqsel_mask); - omap2_clk_writel(v, clk, dd->control_reg); - } - - /* Set DPLL multiplier, divider */ - v = omap2_clk_readl(clk, dd->mult_div1_reg); - - /* Handle Duty Cycle Correction */ - if (dd->dcc_mask) { - if (dd->last_rounded_rate >= dd->dcc_rate) - v |= dd->dcc_mask; /* Enable DCC */ - else - v &= ~dd->dcc_mask; /* Disable DCC */ - } - - v &= ~(dd->mult_mask | dd->div1_mask); - v |= dd->last_rounded_m << __ffs(dd->mult_mask); - v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); - - /* Configure dco and sd_div for dplls that have these fields */ - if (dd->dco_mask) { - _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n); - v &= ~(dd->dco_mask); - v |= dco << __ffs(dd->dco_mask); - } - if (dd->sddiv_mask) { - _lookup_sddiv(clk, &sd_div, dd->last_rounded_m, - dd->last_rounded_n); - v &= ~(dd->sddiv_mask); - v |= sd_div << __ffs(dd->sddiv_mask); - } - - omap2_clk_writel(v, clk, dd->mult_div1_reg); - - /* Set 4X multiplier and low-power mode */ - if (dd->m4xen_mask || dd->lpmode_mask) { - v = omap2_clk_readl(clk, dd->control_reg); - - if (dd->m4xen_mask) { - if (dd->last_rounded_m4xen) - v |= dd->m4xen_mask; - else - v &= ~dd->m4xen_mask; - } - - if (dd->lpmode_mask) { - if (dd->last_rounded_lpmode) - v |= dd->lpmode_mask; - else - v &= ~dd->lpmode_mask; - } - - omap2_clk_writel(v, clk, dd->control_reg); - } - - /* We let the clock framework set the other output dividers later */ - - /* REVISIT: Set ramp-up delay? */ - - _omap3_noncore_dpll_lock(clk); - - return 0; -} - -/* Public functions */ - -/** - * omap3_dpll_recalc - recalculate DPLL rate - * @clk: DPLL struct clk - * - * Recalculate and propagate the DPLL rate. - */ -unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - - return omap2_get_dpll_rate(clk); -} - -/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ - -/** - * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. - * The choice of modes depends on the DPLL's programmed rate: if it is - * the same as the DPLL's parent clock, it will enter bypass; - * otherwise, it will enter lock. This code will wait for the DPLL to - * indicate readiness before returning, unless the DPLL takes too long - * to enter the target state. Intended to be used as the struct clk's - * enable function. If DPLL3 was passed in, or the DPLL does not - * support low-power stop, or if the DPLL took too long to enter - * bypass or lock, return -EINVAL; otherwise, return 0. - */ -int omap3_noncore_dpll_enable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - int r; - struct dpll_data *dd; - struct clk_hw *parent; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (clk->clkdm) { - r = clkdm_clk_enable(clk->clkdm, hw->clk); - if (r) { - WARN(1, - "%s: could not enable %s's clockdomain %s: %d\n", - __func__, __clk_get_name(hw->clk), - clk->clkdm->name, r); - return r; - } - } - - parent = __clk_get_hw(__clk_get_parent(hw->clk)); - - if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) { - WARN_ON(parent != __clk_get_hw(dd->clk_bypass)); - r = _omap3_noncore_dpll_bypass(clk); - } else { - WARN_ON(parent != __clk_get_hw(dd->clk_ref)); - r = _omap3_noncore_dpll_lock(clk); - } - - return r; -} - -/** - * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power stop. This function is - * intended for use in struct clkops. No return value. - */ -void omap3_noncore_dpll_disable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - - _omap3_noncore_dpll_stop(clk); - if (clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); -} - - -/* Non-CORE DPLL rate set code */ - -/** - * omap3_noncore_dpll_determine_rate - determine rate for a DPLL - * @hw: pointer to the clock to determine rate for - * @rate: target rate for the DPLL - * @best_parent_rate: pointer for returning best parent rate - * @best_parent_clk: pointer for returning best parent clock - * - * Determines which DPLL mode to use for reaching a desired target rate. - * Checks whether the DPLL shall be in bypass or locked mode, and if - * locked, calculates the M,N values for the DPLL via round-rate. - * Returns a positive clock rate with success, negative error value - * in failure. - */ -long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate, - unsigned long min_rate, - unsigned long max_rate, - unsigned long *best_parent_rate, - struct clk_hw **best_parent_clk) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct dpll_data *dd; - - if (!hw || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (__clk_get_rate(dd->clk_bypass) == rate && - (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - *best_parent_clk = __clk_get_hw(dd->clk_bypass); - } else { - rate = omap2_dpll_round_rate(hw, rate, best_parent_rate); - *best_parent_clk = __clk_get_hw(dd->clk_ref); - } - - *best_parent_rate = rate; - - return rate; -} - -/** - * omap3_noncore_dpll_set_parent - set parent for a DPLL clock - * @hw: pointer to the clock to set parent for - * @index: parent index to select - * - * Sets parent for a DPLL clock. This sets the DPLL into bypass or - * locked mode. Returns 0 with success, negative error value otherwise. - */ -int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - int ret; - - if (!hw) - return -EINVAL; - - if (index) - ret = _omap3_noncore_dpll_bypass(clk); - else - ret = _omap3_noncore_dpll_lock(clk); - - return ret; -} - -/** - * omap3_noncore_dpll_set_rate - set rate for a DPLL clock - * @hw: pointer to the clock to set parent for - * @rate: target rate for the clock - * @parent_rate: rate of the parent clock - * - * Sets rate for a DPLL clock. First checks if the clock parent is - * reference clock (in bypass mode, the rate of the clock can't be - * changed) and proceeds with the rate change operation. Returns 0 - * with success, negative error value otherwise. - */ -int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct dpll_data *dd; - u16 freqsel = 0; - int ret; - - if (!hw || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (__clk_get_hw(__clk_get_parent(hw->clk)) != - __clk_get_hw(dd->clk_ref)) - return -EINVAL; - - if (dd->last_rounded_rate == 0) - return -EINVAL; - - /* Freqsel is available only on OMAP343X devices */ - if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { - freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); - WARN_ON(!freqsel); - } - - pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__, - __clk_get_name(hw->clk), rate); - - ret = omap3_noncore_dpll_program(clk, freqsel); - - return ret; -} - -/** - * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock - * @hw: pointer to the clock to set rate and parent for - * @rate: target rate for the DPLL - * @parent_rate: clock rate of the DPLL parent - * @index: new parent index for the DPLL, 0 - reference, 1 - bypass - * - * Sets rate and parent for a DPLL clock. If new parent is the bypass - * clock, only selects the parent. Otherwise proceeds with a rate - * change, as this will effectively also change the parent as the - * DPLL is put into locked mode. Returns 0 with success, negative error - * value otherwise. - */ -int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, - unsigned long rate, - unsigned long parent_rate, - u8 index) -{ - int ret; - - if (!hw || !rate) - return -EINVAL; - - /* - * clk-ref at index[0], in which case we only need to set rate, - * the parent will be changed automatically with the lock sequence. - * With clk-bypass case we only need to change parent. - */ - if (index) - ret = omap3_noncore_dpll_set_parent(hw, index); - else - ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate); - - return ret; -} - -/* DPLL autoidle read/set code */ - -/** - * omap3_dpll_autoidle_read - read a DPLL's autoidle bits - * @clk: struct clk * of the DPLL to read - * - * Return the DPLL's autoidle bits, shifted down to bit 0. Returns - * -EINVAL if passed a null pointer or if the struct clk does not - * appear to refer to a DPLL. - */ -u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return -EINVAL; - - dd = clk->dpll_data; - - if (!dd->autoidle_reg) - return -EINVAL; - - v = omap2_clk_readl(clk, dd->autoidle_reg); - v &= dd->autoidle_mask; - v >>= __ffs(dd->autoidle_mask); - - return v; -} - -/** - * omap3_dpll_allow_idle - enable DPLL autoidle bits - * @clk: struct clk * of the DPLL to operate on - * - * Enable DPLL automatic idle control. This automatic idle mode - * switching takes effect only when the DPLL is locked, at least on - * OMAP3430. The DPLL will enter low-power stop when its downstream - * clocks are gated. No return value. - */ -void omap3_dpll_allow_idle(struct clk_hw_omap *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - if (!dd->autoidle_reg) - return; - - /* - * REVISIT: CORE DPLL can optionally enter low-power bypass - * by writing 0x5 instead of 0x1. Add some mechanism to - * optionally enter this mode. - */ - v = omap2_clk_readl(clk, dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); - omap2_clk_writel(v, clk, dd->autoidle_reg); - -} - -/** - * omap3_dpll_deny_idle - prevent DPLL from automatically idling - * @clk: struct clk * of the DPLL to operate on - * - * Disable DPLL automatic idle control. No return value. - */ -void omap3_dpll_deny_idle(struct clk_hw_omap *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - if (!dd->autoidle_reg) - return; - - v = omap2_clk_readl(clk, dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); - omap2_clk_writel(v, clk, dd->autoidle_reg); - -} - -/* Clock control for DPLL outputs */ - -/* Find the parent DPLL for the given clkoutx2 clock */ -static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw) -{ - struct clk_hw_omap *pclk = NULL; - struct clk *parent; - - /* Walk up the parents of clk, looking for a DPLL */ - do { - do { - parent = __clk_get_parent(hw->clk); - hw = __clk_get_hw(parent); - } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC)); - if (!hw) - break; - pclk = to_clk_hw_omap(hw); - } while (pclk && !pclk->dpll_data); - - /* clk does not have a DPLL as a parent? error in the clock data */ - if (!pclk) { - WARN_ON(1); - return NULL; - } - - return pclk; -} - -/** - * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate - * @clk: DPLL output struct clk - * - * Using parent clock DPLL data, look up DPLL state. If locked, set our - * rate to the dpll_clk * 2; otherwise, just use dpll_clk. - */ -unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, - unsigned long parent_rate) -{ - const struct dpll_data *dd; - unsigned long rate; - u32 v; - struct clk_hw_omap *pclk = NULL; - - if (!parent_rate) - return 0; - - pclk = omap3_find_clkoutx2_dpll(hw); - - if (!pclk) - return 0; - - dd = pclk->dpll_data; - - WARN_ON(!dd->enable_mask); - - v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask; - v >>= __ffs(dd->enable_mask); - if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE)) - rate = parent_rate; - else - rate = parent_rate * 2; - return rate; -} - -int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - return 0; -} - -long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - const struct dpll_data *dd; - u32 v; - struct clk_hw_omap *pclk = NULL; - - if (!*prate) - return 0; - - pclk = omap3_find_clkoutx2_dpll(hw); - - if (!pclk) - return 0; - - dd = pclk->dpll_data; - - /* TYPE J does not have a clkoutx2 */ - if (dd->flags & DPLL_J_TYPE) { - *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate); - return *prate; - } - - WARN_ON(!dd->enable_mask); - - v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask; - v >>= __ffs(dd->enable_mask); - - /* If in bypass, the rate is fixed to the bypass rate*/ - if (v != OMAP3XXX_EN_DPLL_LOCKED) - return *prate; - - if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) { - unsigned long best_parent; - - best_parent = (rate / 2); - *prate = __clk_round_rate(__clk_get_parent(hw->clk), - best_parent); - } - - return *prate * 2; -} - -/* OMAP3/4 non-CORE DPLL clkops */ -const struct clk_hw_omap_ops clkhwops_omap3_dpll = { - .allow_idle = omap3_dpll_allow_idle, - .deny_idle = omap3_dpll_deny_idle, -}; diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c deleted file mode 100644 index f231be05b9a6..000000000000 --- a/arch/arm/mach-omap2/dpll44xx.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * OMAP4-specific DPLL control functions - * - * Copyright (C) 2011 Texas Instruments, Inc. - * Rajendra Nayak - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/bitops.h> - -#include "clock.h" - -/* - * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that - * can supported when using the DPLL low-power mode. Frequencies are - * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control, - * Status, and Low-Power Operation Mode". - */ -#define OMAP4_DPLL_LP_FINT_MAX 1000000 -#define OMAP4_DPLL_LP_FOUT_MAX 100000000 - -/* - * Bitfield declarations - */ -#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) -#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10) -#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11) - -/* Static rate multiplier for OMAP4 REGM4XEN clocks */ -#define OMAP4430_REGM4XEN_MULT 4 - -void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk) -{ - u32 v; - u32 mask; - - if (!clk || !clk->clksel_reg) - return; - - mask = clk->flags & CLOCK_CLKOUTX2 ? - OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : - OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; - - v = omap2_clk_readl(clk, clk->clksel_reg); - /* Clear the bit to allow gatectrl */ - v &= ~mask; - omap2_clk_writel(v, clk, clk->clksel_reg); -} - -void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk) -{ - u32 v; - u32 mask; - - if (!clk || !clk->clksel_reg) - return; - - mask = clk->flags & CLOCK_CLKOUTX2 ? - OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : - OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; - - v = omap2_clk_readl(clk, clk->clksel_reg); - /* Set the bit to deny gatectrl */ - v |= mask; - omap2_clk_writel(v, clk, clk->clksel_reg); -} - -const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = { - .allow_idle = omap4_dpllmx_allow_gatectrl, - .deny_idle = omap4_dpllmx_deny_gatectrl, -}; - -/** - * omap4_dpll_lpmode_recalc - compute DPLL low-power setting - * @dd: pointer to the dpll data structure - * - * Calculates if low-power mode can be enabled based upon the last - * multiplier and divider values calculated. If low-power mode can be - * enabled, then the bit to enable low-power mode is stored in the - * last_rounded_lpmode variable. This implementation is based upon the - * criteria for enabling low-power mode as described in the OMAP4430/60 - * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power - * Operation Mode". - */ -static void omap4_dpll_lpmode_recalc(struct dpll_data *dd) -{ - long fint, fout; - - fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1); - fout = fint * dd->last_rounded_m; - - if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX)) - dd->last_rounded_lpmode = 1; - else - dd->last_rounded_lpmode = 0; -} - -/** - * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit - * @clk: struct clk * of the DPLL to compute the rate for - * - * Compute the output rate for the OMAP4 DPLL represented by @clk. - * Takes the REGM4XEN bit into consideration, which is needed for the - * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers) - * upon success, or 0 upon error. - */ -unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; - unsigned long rate; - struct dpll_data *dd; - - if (!clk || !clk->dpll_data) - return 0; - - dd = clk->dpll_data; - - rate = omap2_get_dpll_rate(clk); - - /* regm4xen adds a multiplier of 4 to DPLL calculations */ - v = omap2_clk_readl(clk, dd->control_reg); - if (v & OMAP4430_DPLL_REGM4XEN_MASK) - rate *= OMAP4430_REGM4XEN_MULT; - - return rate; -} - -/** - * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit - * @clk: struct clk * of the DPLL to round a rate for - * @target_rate: the desired rate of the DPLL - * - * Compute the rate that would be programmed into the DPLL hardware - * for @clk if set_rate() were to be provided with the rate - * @target_rate. Takes the REGM4XEN bit into consideration, which is - * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before - * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or - * ~0 if an error occurred in omap2_dpll_round_rate(). - */ -long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, - unsigned long target_rate, - unsigned long *parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct dpll_data *dd; - long r; - - if (!clk || !clk->dpll_data) - return -EINVAL; - - dd = clk->dpll_data; - - dd->last_rounded_m4xen = 0; - - /* - * First try to compute the DPLL configuration for - * target rate without using the 4X multiplier. - */ - r = omap2_dpll_round_rate(hw, target_rate, NULL); - if (r != ~0) - goto out; - - /* - * If we did not find a valid DPLL configuration, try again, but - * this time see if using the 4X multiplier can help. Enabling the - * 4X multiplier is equivalent to dividing the target rate by 4. - */ - r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT, - NULL); - if (r == ~0) - return r; - - dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; - dd->last_rounded_m4xen = 1; - -out: - omap4_dpll_lpmode_recalc(dd); - - return dd->last_rounded_rate; -} - -/** - * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL - * @hw: pointer to the clock to determine rate for - * @rate: target rate for the DPLL - * @best_parent_rate: pointer for returning best parent rate - * @best_parent_clk: pointer for returning best parent clock - * - * Determines which DPLL mode to use for reaching a desired rate. - * Checks whether the DPLL shall be in bypass or locked mode, and if - * locked, calculates the M,N values for the DPLL via round-rate. - * Returns a positive clock rate with success, negative error value - * in failure. - */ -long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate, - unsigned long min_rate, - unsigned long max_rate, - unsigned long *best_parent_rate, - struct clk_hw **best_parent_clk) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct dpll_data *dd; - - if (!hw || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (__clk_get_rate(dd->clk_bypass) == rate && - (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - *best_parent_clk = __clk_get_hw(dd->clk_bypass); - } else { - rate = omap4_dpll_regm4xen_round_rate(hw, rate, - best_parent_rate); - *best_parent_clk = __clk_get_hw(dd->clk_ref); - } - - *best_parent_rate = rate; - - return rate; -} diff --git a/arch/arm/mach-omap2/include/mach/barriers.h b/arch/arm/mach-omap2/include/mach/barriers.h deleted file mode 100644 index 1c582a8592b9..000000000000 --- a/arch/arm/mach-omap2/include/mach/barriers.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * OMAP memory barrier header. - * - * Copyright (C) 2011 Texas Instruments, Inc. - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __MACH_BARRIERS_H -#define __MACH_BARRIERS_H - -#include <asm/outercache.h> - -extern void omap_bus_sync(void); - -#define rmb() dsb() -#define wmb() do { dsb(); outer_sync(); omap_bus_sync(); } while (0) -#define mb() wmb() - -#endif /* __MACH_BARRIERS_H */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 820dde8b5b04..980c9372e6fd 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -37,7 +37,6 @@ #include "clock.h" #include "clock2xxx.h" #include "clock3xxx.h" -#include "clock44xx.h" #include "omap-pm.h" #include "sdrc.h" #include "control.h" @@ -236,7 +235,7 @@ static struct map_desc omap44xx_io_desc[] __initdata = { }; #endif -#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) +#ifdef CONFIG_SOC_OMAP5 static struct map_desc omap54xx_io_desc[] __initdata = { { .virtual = L3_54XX_VIRT, @@ -265,6 +264,53 @@ static struct map_desc omap54xx_io_desc[] __initdata = { }; #endif +#ifdef CONFIG_SOC_DRA7XX +static struct map_desc dra7xx_io_desc[] __initdata = { + { + .virtual = L4_CFG_MPU_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_CFG_MPU_DRA7XX_PHYS), + .length = L4_CFG_MPU_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L3_MAIN_SN_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L3_MAIN_SN_DRA7XX_PHYS), + .length = L3_MAIN_SN_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER1_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_PER1_DRA7XX_PHYS), + .length = L4_PER1_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER2_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_PER2_DRA7XX_PHYS), + .length = L4_PER2_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_PER3_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_PER3_DRA7XX_PHYS), + .length = L4_PER3_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_CFG_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_CFG_DRA7XX_PHYS), + .length = L4_CFG_DRA7XX_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = L4_WKUP_DRA7XX_VIRT, + .pfn = __phys_to_pfn(L4_WKUP_DRA7XX_PHYS), + .length = L4_WKUP_DRA7XX_SIZE, + .type = MT_DEVICE, + }, +}; +#endif + #ifdef CONFIG_SOC_OMAP2420 void __init omap242x_map_io(void) { @@ -306,13 +352,22 @@ void __init am33xx_map_io(void) void __init omap4_map_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); + omap_barriers_init(); } #endif -#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) +#ifdef CONFIG_SOC_OMAP5 void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); + omap_barriers_init(); +} +#endif + +#ifdef CONFIG_SOC_DRA7XX +void __init dra7xx_map_io(void) +{ + iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc)); } #endif /* @@ -554,11 +609,11 @@ void __init ti814x_init_early(void) omap2_prcm_base_init(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); - ti81xx_clockdomains_init(); - ti81xx_hwmod_init(); + ti814x_clockdomains_init(); + dm814x_hwmod_init(); omap_hwmod_init_postsetup(); if (of_have_populated_dt()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm814x_dt_clk_init; } void __init ti816x_init_early(void) @@ -571,11 +626,11 @@ void __init ti816x_init_early(void) omap2_prcm_base_init(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); - ti81xx_clockdomains_init(); - ti81xx_hwmod_init(); + ti816x_clockdomains_init(); + dm816x_hwmod_init(); omap_hwmod_init_postsetup(); if (of_have_populated_dt()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm816x_dt_clk_init; } #endif @@ -723,6 +778,8 @@ int __init omap_clk_init(void) ti_clk_init_features(); + omap2_clk_setup_ll_ops(); + if (of_have_populated_dt()) { ret = omap_control_init(); if (ret) diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h index cce2b65039f1..6191d244438a 100644 --- a/arch/arm/mach-omap2/iomap.h +++ b/arch/arm/mach-omap2/iomap.h @@ -194,3 +194,66 @@ #define L4_PER_54XX_PHYS L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */ #define L4_PER_54XX_VIRT (L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_54XX_SIZE SZ_4M + +/* + * ---------------------------------------------------------------------------- + * DRA7xx specific IO mapping + * ---------------------------------------------------------------------------- + */ +/* + * L3_MAIN_SN_DRA7XX_PHYS 0x44000000 --> 0xf8000000 + * The overall space is 24MiB (0x4400_0000<->0x457F_FFFF), but mapping + * everything is just inefficient, since, there are too many address holes. + */ +#define L3_MAIN_SN_DRA7XX_PHYS L3_MAIN_SN_DRA7XX_BASE +#define L3_MAIN_SN_DRA7XX_VIRT (L3_MAIN_SN_DRA7XX_PHYS + OMAP4_L3_IO_OFFSET) +#define L3_MAIN_SN_DRA7XX_SIZE SZ_1M + +/* + * L4_PER1_DRA7XX_PHYS (0x4800_000<>0x480D_2FFF) -> 0.82MiB (alloc 1MiB) + * (0x48000000<->0x48100000) <=> (0xFA000000<->0xFA100000) + */ +#define L4_PER1_DRA7XX_PHYS L4_PER1_DRA7XX_BASE +#define L4_PER1_DRA7XX_VIRT (L4_PER1_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER1_DRA7XX_SIZE SZ_1M + +/* + * L4_CFG_MPU_DRA7XX_PHYS (0x48210000<>0x482A_F2FF) -> 0.62MiB (alloc 1MiB) + * (0x48210000<->0x48310000) <=> (0xFA210000<->0xFA310000) + * NOTE: This is a bit of an orphan memory map sitting isolated in TRM + */ +#define L4_CFG_MPU_DRA7XX_PHYS L4_CFG_MPU_DRA7XX_BASE +#define L4_CFG_MPU_DRA7XX_VIRT (L4_CFG_MPU_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_CFG_MPU_DRA7XX_SIZE SZ_1M + +/* + * L4_PER2_DRA7XX_PHYS (0x4840_0000<>0x4848_8FFF) -> .53MiB (alloc 1MiB) + * (0x48400000<->0x48500000) <=> (0xFA400000<->0xFA500000) + */ +#define L4_PER2_DRA7XX_PHYS L4_PER2_DRA7XX_BASE +#define L4_PER2_DRA7XX_VIRT (L4_PER2_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER2_DRA7XX_SIZE SZ_1M + +/* + * L4_PER3_DRA7XX_PHYS (0x4880_0000<>0x489E_0FFF) -> 1.87MiB (alloc 2MiB) + * (0x48800000<->0x48A00000) <=> (0xFA800000<->0xFAA00000) + */ +#define L4_PER3_DRA7XX_PHYS L4_PER3_DRA7XX_BASE +#define L4_PER3_DRA7XX_VIRT (L4_PER3_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_PER3_DRA7XX_SIZE SZ_2M + +/* + * L4_CFG_DRA7XX_PHYS (0x4A00_0000<>0x4A22_BFFF) ->2.17MiB (alloc 3MiB)? + * (0x4A000000<->0x4A300000) <=> (0xFC000000<->0xFC300000) + */ +#define L4_CFG_DRA7XX_PHYS L4_CFG_DRA7XX_BASE +#define L4_CFG_DRA7XX_VIRT (L4_CFG_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_CFG_DRA7XX_SIZE (SZ_1M + SZ_2M) + +/* + * L4_WKUP_DRA7XX_PHYS (0x4AE0_0000<>0x4AE3_EFFF) -> .24 mb (alloc 1MiB)? + * (0x4AE00000<->4AF00000) <=> (0xFCE00000<->0xFCF00000) + */ +#define L4_WKUP_DRA7XX_PHYS L4_WKUP_DRA7XX_BASE +#define L4_WKUP_DRA7XX_VIRT (L4_WKUP_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_WKUP_DRA7XX_SIZE SZ_1M diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 4068350f9059..8867eb4025bf 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -11,7 +11,6 @@ */ #include <linux/of.h> -#include <linux/module.h> #include <linux/platform_device.h> #include <linux/err.h> #include <linux/slab.h> @@ -63,15 +62,5 @@ static int __init omap_iommu_init(void) return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL); } -/* must be ready before omap3isp is probed */ omap_subsys_initcall(omap_iommu_init); - -static void __exit omap_iommu_exit(void) -{ - /* Do nothing */ -} -module_exit(omap_iommu_exit); - -MODULE_AUTHOR("Hiroshi DOYU"); -MODULE_DESCRIPTION("omap iommu: omap device registration"); -MODULE_LICENSE("GPL v2"); +/* must be ready before omap3isp is probed */ diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 79f49d904a06..65024af169d3 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -105,7 +105,7 @@ static void dummy_cpu_resume(void) static void dummy_scu_prepare(unsigned int cpu_id, unsigned int cpu_state) {} -struct cpu_pm_ops omap_pm_ops = { +static struct cpu_pm_ops omap_pm_ops = { .finish_suspend = default_finish_suspend, .resume = dummy_cpu_resume, .scu_prepare = dummy_scu_prepare, diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 8e52621b5a6b..e1d2e991d17a 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -392,6 +392,7 @@ static struct irq_chip wakeupgen_chip = { .irq_mask = wakeupgen_mask, .irq_unmask = wakeupgen_unmask, .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_type = irq_chip_set_type_parent, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND, #ifdef CONFIG_SMP .irq_set_affinity = irq_chip_set_affinity_parent, diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c index 103a49f68bcb..4bdd22edb96b 100644 --- a/arch/arm/mach-omap2/omap3-restart.c +++ b/arch/arm/mach-omap2/omap3-restart.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/reboot.h> +#include "common.h" #include "control.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 16350eefa66c..949696b6f17b 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -51,6 +51,127 @@ static void __iomem *twd_base; #define IRQ_LOCALTIMER 29 +#ifdef CONFIG_OMAP_INTERCONNECT_BARRIER + +/* Used to implement memory barrier on DRAM path */ +#define OMAP4_DRAM_BARRIER_VA 0xfe600000 + +static void __iomem *dram_sync, *sram_sync; +static phys_addr_t dram_sync_paddr; +static u32 dram_sync_size; + +/* + * The OMAP4 bus structure contains asynchrnous bridges which can buffer + * data writes from the MPU. These asynchronous bridges can be found on + * paths between the MPU to EMIF, and the MPU to L3 interconnects. + * + * We need to be careful about re-ordering which can happen as a result + * of different accesses being performed via different paths, and + * therefore different asynchronous bridges. + */ + +/* + * OMAP4 interconnect barrier which is called for each mb() and wmb(). + * This is to ensure that normal paths to DRAM (normal memory, cacheable + * accesses) are properly synchronised with writes to DMA coherent memory + * (normal memory, uncacheable) and device writes. + * + * The mb() and wmb() barriers only operate only on the MPU->MA->EMIF + * path, as we need to ensure that data is visible to other system + * masters prior to writes to those system masters being seen. + * + * Note: the SRAM path is not synchronised via mb() and wmb(). + */ +static void omap4_mb(void) +{ + if (dram_sync) + writel_relaxed(0, dram_sync); +} + +/* + * OMAP4 Errata i688 - asynchronous bridge corruption when entering WFI. + * + * If a data is stalled inside asynchronous bridge because of back + * pressure, it may be accepted multiple times, creating pointer + * misalignment that will corrupt next transfers on that data path until + * next reset of the system. No recovery procedure once the issue is hit, + * the path remains consistently broken. + * + * Async bridges can be found on paths between MPU to EMIF and MPU to L3 + * interconnects. + * + * This situation can happen only when the idle is initiated by a Master + * Request Disconnection (which is trigged by software when executing WFI + * on the CPU). + * + * The work-around for this errata needs all the initiators connected + * through an async bridge to ensure that data path is properly drained + * before issuing WFI. This condition will be met if one Strongly ordered + * access is performed to the target right before executing the WFI. + * + * In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. + * IO barrier ensure that there is no synchronisation loss on initiators + * operating on both interconnect port simultaneously. + * + * This is a stronger version of the OMAP4 memory barrier below, and + * operates on both the MPU->MA->EMIF path but also the MPU->OCP path + * as well, and is necessary prior to executing a WFI. + */ +void omap_interconnect_sync(void) +{ + if (dram_sync && sram_sync) { + writel_relaxed(readl_relaxed(dram_sync), dram_sync); + writel_relaxed(readl_relaxed(sram_sync), sram_sync); + isb(); + } +} + +static int __init omap4_sram_init(void) +{ + struct device_node *np; + struct gen_pool *sram_pool; + + np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu"); + if (!np) + pr_warn("%s:Unable to allocate sram needed to handle errata I688\n", + __func__); + sram_pool = of_gen_pool_get(np, "sram", 0); + if (!sram_pool) + pr_warn("%s:Unable to get sram pool needed to handle errata I688\n", + __func__); + else + sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE); + + return 0; +} +omap_arch_initcall(omap4_sram_init); + +/* Steal one page physical memory for barrier implementation */ +void __init omap_barrier_reserve_memblock(void) +{ + dram_sync_size = ALIGN(PAGE_SIZE, SZ_1M); + dram_sync_paddr = arm_memblock_steal(dram_sync_size, SZ_1M); +} + +void __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; + dram_io_desc[0].pfn = __phys_to_pfn(dram_sync_paddr); + dram_io_desc[0].length = dram_sync_size; + dram_io_desc[0].type = MT_MEMORY_RW_SO; + iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc)); + dram_sync = (void __iomem *) dram_io_desc[0].virtual; + + pr_info("OMAP4: Map %pa to %p for dram barrier\n", + &dram_sync_paddr, dram_sync); + + soc_mb = omap4_mb; +} + +#endif + void gic_dist_disable(void) { if (gic_dist_base_addr) diff --git a/arch/arm/mach-omap2/omap4-restart.c b/arch/arm/mach-omap2/omap4-restart.c index a99e7f7fb5be..e17136a50e27 100644 --- a/arch/arm/mach-omap2/omap4-restart.c +++ b/arch/arm/mach-omap2/omap4-restart.c @@ -9,6 +9,7 @@ #include <linux/types.h> #include <linux/reboot.h> +#include "common.h" #include "prm.h" /** diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index 2d35c5709408..0ca8e938096b 100644 --- a/arch/arm/mach-omap2/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h @@ -30,6 +30,14 @@ #define OMAP54XX_CTRL_BASE 0x4a002800 #define OMAP54XX_SAR_RAM_BASE 0x4ae26000 +/* DRA7 specific base addresses */ +#define L3_MAIN_SN_DRA7XX_BASE 0x44000000 +#define L4_PER1_DRA7XX_BASE 0x48000000 +#define L4_CFG_MPU_DRA7XX_BASE 0x48210000 +#define L4_PER2_DRA7XX_BASE 0x48400000 +#define L4_PER3_DRA7XX_BASE 0x48800000 +#define L4_CFG_DRA7XX_BASE 0x4A000000 +#define L4_WKUP_DRA7XX_BASE 0x4ae00000 #define DRA7XX_CM_CORE_AON_BASE 0x4a005000 #define DRA7XX_CTRL_BASE 0x4a003400 #define DRA7XX_TAP_BASE 0x4ae0c000 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 486cc4ded190..cc8a987149e2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -130,6 +130,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/io.h> +#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/err.h> @@ -299,7 +300,20 @@ static void _write_sysconfig(u32 v, struct omap_hwmod *oh) /* Module might have lost context, always update cache and register */ oh->_sysc_cache = v; + + /* + * Some IP blocks (such as RTC) require unlocking of IP before + * accessing its registers. If a function pointer is present + * to unlock, then call it before accessing sysconfig and + * call lock after writing sysconfig. + */ + if (oh->class->unlock) + oh->class->unlock(oh); + omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs); + + if (oh->class->lock) + oh->class->lock(oh); } /** @@ -3886,7 +3900,8 @@ void __init omap_hwmod_init(void) soc_ops.init_clkdm = _init_clkdm; soc_ops.update_context_lost = _omap4_update_context_lost; soc_ops.get_context_lost = _omap4_get_context_lost; - } else if (cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) { + } else if (cpu_is_ti814x() || cpu_is_ti816x() || soc_is_am33xx() || + soc_is_am43xx()) { soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index b5d27ec81610..ca6df1a73475 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -576,6 +576,8 @@ struct omap_hwmod_omap4_prcm { * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown * @reset: ptr to fn to be executed in place of the standard hwmod reset fn * @enable_preprogram: ptr to fn to be executed during device enable + * @lock: ptr to fn to be executed to lock IP registers + * @unlock: ptr to fn to be executed to unlock IP registers * * Represent the class of a OMAP hardware "modules" (e.g. timer, * smartreflex, gpio, uart...) @@ -600,6 +602,8 @@ struct omap_hwmod_class { int (*pre_shutdown)(struct omap_hwmod *oh); int (*reset)(struct omap_hwmod *oh); int (*enable_preprogram)(struct omap_hwmod *oh); + void (*lock)(struct omap_hwmod *oh); + void (*unlock)(struct omap_hwmod *oh); }; /** @@ -755,7 +759,8 @@ extern int omap3xxx_hwmod_init(void); extern int omap44xx_hwmod_init(void); extern int omap54xx_hwmod_init(void); extern int am33xx_hwmod_init(void); -extern int ti81xx_hwmod_init(void); +extern int dm814x_hwmod_init(void); +extern int dm816x_hwmod_init(void); extern int dra7xx_hwmod_init(void); int am43xx_hwmod_init(void); diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 6dcfd03ced8f..36bcd2e75422 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -20,7 +20,7 @@ #include "prm-regbits-24xx.h" #include "wd_timer.h" -struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { +static struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .dma_req = -1, }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 215d5efa0dba..e97a894b5f88 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -480,7 +480,7 @@ static struct omap_hwmod am43xx_dss_core_hwmod = { /* dispc */ -struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = { +static struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = { .manager_count = 1, .has_framedonetv_irq = 0 }; diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index c92413769144..b1288f56d509 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -32,21 +32,59 @@ */ /* - * The alwon .clkctrl_offs field is offset from the CM_ALWON, that's - * TRM 18.7.17 CM_ALWON device register values minus 0x1400. + * Common alwon .clkctrl_offs from dm814x TRM "Table 2-278. CM_ALWON REGISTERS" + * also dm816x TRM 18.7.17 CM_ALWON device register values minus 0x1400. */ +#define DM81XX_CM_ALWON_MCASP0_CLKCTRL 0x140 +#define DM81XX_CM_ALWON_MCASP1_CLKCTRL 0x144 +#define DM81XX_CM_ALWON_MCASP2_CLKCTRL 0x148 +#define DM81XX_CM_ALWON_MCBSP_CLKCTRL 0x14c +#define DM81XX_CM_ALWON_UART_0_CLKCTRL 0x150 +#define DM81XX_CM_ALWON_UART_1_CLKCTRL 0x154 +#define DM81XX_CM_ALWON_UART_2_CLKCTRL 0x158 +#define DM81XX_CM_ALWON_GPIO_0_CLKCTRL 0x15c +#define DM81XX_CM_ALWON_GPIO_1_CLKCTRL 0x160 +#define DM81XX_CM_ALWON_I2C_0_CLKCTRL 0x164 +#define DM81XX_CM_ALWON_I2C_1_CLKCTRL 0x168 +#define DM81XX_CM_ALWON_WDTIMER_CLKCTRL 0x18c +#define DM81XX_CM_ALWON_SPI_CLKCTRL 0x190 +#define DM81XX_CM_ALWON_MAILBOX_CLKCTRL 0x194 +#define DM81XX_CM_ALWON_SPINBOX_CLKCTRL 0x198 +#define DM81XX_CM_ALWON_MMUDATA_CLKCTRL 0x19c +#define DM81XX_CM_ALWON_MMUCFG_CLKCTRL 0x1a8 +#define DM81XX_CM_ALWON_CONTROL_CLKCTRL 0x1c4 +#define DM81XX_CM_ALWON_GPMC_CLKCTRL 0x1d0 +#define DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL 0x1d4 +#define DM81XX_CM_ALWON_L3_CLKCTRL 0x1e4 +#define DM81XX_CM_ALWON_L4HS_CLKCTRL 0x1e8 +#define DM81XX_CM_ALWON_L4LS_CLKCTRL 0x1ec +#define DM81XX_CM_ALWON_RTC_CLKCTRL 0x1f0 +#define DM81XX_CM_ALWON_TPCC_CLKCTRL 0x1f4 +#define DM81XX_CM_ALWON_TPTC0_CLKCTRL 0x1f8 +#define DM81XX_CM_ALWON_TPTC1_CLKCTRL 0x1fc +#define DM81XX_CM_ALWON_TPTC2_CLKCTRL 0x200 +#define DM81XX_CM_ALWON_TPTC3_CLKCTRL 0x204 + +/* Registers specific to dm814x */ +#define DM814X_CM_ALWON_MCASP_3_4_5_CLKCTRL 0x16c +#define DM814X_CM_ALWON_ATL_CLKCTRL 0x170 +#define DM814X_CM_ALWON_MLB_CLKCTRL 0x174 +#define DM814X_CM_ALWON_PATA_CLKCTRL 0x178 +#define DM814X_CM_ALWON_UART_3_CLKCTRL 0x180 +#define DM814X_CM_ALWON_UART_4_CLKCTRL 0x184 +#define DM814X_CM_ALWON_UART_5_CLKCTRL 0x188 +#define DM814X_CM_ALWON_OCM_0_CLKCTRL 0x1b4 +#define DM814X_CM_ALWON_VCP_CLKCTRL 0x1b8 +#define DM814X_CM_ALWON_MPU_CLKCTRL 0x1dc +#define DM814X_CM_ALWON_DEBUGSS_CLKCTRL 0x1e0 +#define DM814X_CM_ALWON_DCAN_0_1_CLKCTRL 0x218 +#define DM814X_CM_ALWON_MMCHS_0_CLKCTRL 0x21c +#define DM814X_CM_ALWON_MMCHS_1_CLKCTRL 0x220 +#define DM814X_CM_ALWON_MMCHS_2_CLKCTRL 0x224 +#define DM814X_CM_ALWON_CUST_EFUSE_CLKCTRL 0x228 + +/* Registers specific to dm816x */ #define DM816X_DM_ALWON_BASE 0x1400 -#define DM816X_CM_ALWON_MCASP0_CLKCTRL (0x1540 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MCASP1_CLKCTRL (0x1544 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MCASP2_CLKCTRL (0x1548 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MCBSP_CLKCTRL (0x154c - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_UART_0_CLKCTRL (0x1550 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_UART_1_CLKCTRL (0x1554 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_UART_2_CLKCTRL (0x1558 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_GPIO_0_CLKCTRL (0x155c - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_GPIO_1_CLKCTRL (0x1560 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_I2C_0_CLKCTRL (0x1564 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_I2C_1_CLKCTRL (0x1568 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_TIMER_1_CLKCTRL (0x1570 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_TIMER_2_CLKCTRL (0x1574 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_TIMER_3_CLKCTRL (0x1578 - DM816X_DM_ALWON_BASE) @@ -54,29 +92,11 @@ #define DM816X_CM_ALWON_TIMER_5_CLKCTRL (0x1580 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_TIMER_6_CLKCTRL (0x1584 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_TIMER_7_CLKCTRL (0x1588 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_WDTIMER_CLKCTRL (0x158c - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_SPI_CLKCTRL (0x1590 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MAILBOX_CLKCTRL (0x1594 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_SPINBOX_CLKCTRL (0x1598 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MMUDATA_CLKCTRL (0x159c - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MMUCFG_CLKCTRL (0x15a8 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_SDIO_CLKCTRL (0x15b0 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_OCMC_0_CLKCTRL (0x15b4 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_OCMC_1_CLKCTRL (0x15b8 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_CONTRL_CLKCTRL (0x15c4 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_GPMC_CLKCTRL (0x15d0 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_ETHERNET_0_CLKCTRL (0x15d4 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_ETHERNET_1_CLKCTRL (0x15d8 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_MPU_CLKCTRL (0x15dc - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_L3_CLKCTRL (0x15e4 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_L4HS_CLKCTRL (0x15e8 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_L4LS_CLKCTRL (0x15ec - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_RTC_CLKCTRL (0x15f0 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPCC_CLKCTRL (0x15f4 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPTC0_CLKCTRL (0x15f8 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPTC1_CLKCTRL (0x15fc - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPTC2_CLKCTRL (0x1600 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPTC3_CLKCTRL (0x1604 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_SR_0_CLKCTRL (0x1608 - DM816X_DM_ALWON_BASE) #define DM816X_CM_ALWON_SR_1_CLKCTRL (0x160c - DM816X_DM_ALWON_BASE) @@ -88,28 +108,28 @@ #define DM816X_CM_DEFAULT_USB_CLKCTRL (0x558 - DM816X_CM_DEFAULT_OFFSET) /* L3 Interconnect entries clocked at 125, 250 and 500MHz */ -static struct omap_hwmod dm816x_alwon_l3_slow_hwmod = { +static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = { .name = "alwon_l3_slow", .clkdm_name = "alwon_l3s_clkdm", .class = &l3_hwmod_class, .flags = HWMOD_NO_IDLEST, }; -static struct omap_hwmod dm816x_default_l3_slow_hwmod = { +static struct omap_hwmod dm81xx_default_l3_slow_hwmod = { .name = "default_l3_slow", .clkdm_name = "default_l3_slow_clkdm", .class = &l3_hwmod_class, .flags = HWMOD_NO_IDLEST, }; -static struct omap_hwmod dm816x_alwon_l3_med_hwmod = { +static struct omap_hwmod dm81xx_alwon_l3_med_hwmod = { .name = "l3_med", .clkdm_name = "alwon_l3_med_clkdm", .class = &l3_hwmod_class, .flags = HWMOD_NO_IDLEST, }; -static struct omap_hwmod dm816x_alwon_l3_fast_hwmod = { +static struct omap_hwmod dm81xx_alwon_l3_fast_hwmod = { .name = "l3_fast", .clkdm_name = "alwon_l3_fast_clkdm", .class = &l3_hwmod_class, @@ -120,7 +140,7 @@ static struct omap_hwmod dm816x_alwon_l3_fast_hwmod = { * L4 standard peripherals, see TRM table 1-12 for devices using this. * See TRM table 1-73 for devices using the 125MHz SYSCLK6 clock. */ -static struct omap_hwmod dm816x_l4_ls_hwmod = { +static struct omap_hwmod dm81xx_l4_ls_hwmod = { .name = "l4_ls", .clkdm_name = "alwon_l3s_clkdm", .class = &l4_hwmod_class, @@ -131,27 +151,54 @@ static struct omap_hwmod dm816x_l4_ls_hwmod = { * table 1-13. On dm816x, only EMAC, MDIO and SATA use this. See also TRM * table 1-73 for devices using 250MHz SYSCLK5 clock. */ -static struct omap_hwmod dm816x_l4_hs_hwmod = { +static struct omap_hwmod dm81xx_l4_hs_hwmod = { .name = "l4_hs", .clkdm_name = "alwon_l3_med_clkdm", .class = &l4_hwmod_class, }; /* L3 slow -> L4 ls peripheral interface running at 125MHz */ -static struct omap_hwmod_ocp_if dm816x_alwon_l3_slow__l4_ls = { - .master = &dm816x_alwon_l3_slow_hwmod, - .slave = &dm816x_l4_ls_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__l4_ls = { + .master = &dm81xx_alwon_l3_slow_hwmod, + .slave = &dm81xx_l4_ls_hwmod, .user = OCP_USER_MPU, }; /* L3 med -> L4 fast peripheral interface running at 250MHz */ -static struct omap_hwmod_ocp_if dm816x_alwon_l3_slow__l4_hs = { - .master = &dm816x_alwon_l3_med_hwmod, - .slave = &dm816x_l4_hs_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__l4_hs = { + .master = &dm81xx_alwon_l3_med_hwmod, + .slave = &dm81xx_l4_hs_hwmod, .user = OCP_USER_MPU, }; /* MPU */ +static struct omap_hwmod dm814x_mpu_hwmod = { + .name = "mpu", + .clkdm_name = "alwon_l3s_clkdm", + .class = &mpu_hwmod_class, + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "mpu_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM814X_CM_ALWON_MPU_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if dm814x_mpu__alwon_l3_slow = { + .master = &dm814x_mpu_hwmod, + .slave = &dm81xx_alwon_l3_slow_hwmod, + .user = OCP_USER_MPU, +}; + +/* L3 med peripheral interface running at 200MHz */ +static struct omap_hwmod_ocp_if dm814x_mpu__alwon_l3_med = { + .master = &dm814x_mpu_hwmod, + .slave = &dm81xx_alwon_l3_med_hwmod, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod dm816x_mpu_hwmod = { .name = "mpu", .clkdm_name = "alwon_mpu_clkdm", @@ -168,14 +215,14 @@ static struct omap_hwmod dm816x_mpu_hwmod = { static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_slow = { .master = &dm816x_mpu_hwmod, - .slave = &dm816x_alwon_l3_slow_hwmod, + .slave = &dm81xx_alwon_l3_slow_hwmod, .user = OCP_USER_MPU, }; /* L3 med peripheral interface running at 250MHz */ static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = { .master = &dm816x_mpu_hwmod, - .slave = &dm816x_alwon_l3_med_hwmod, + .slave = &dm81xx_alwon_l3_med_hwmod, .user = OCP_USER_MPU, }; @@ -197,13 +244,13 @@ static struct omap_hwmod_class uart_class = { .sysc = &uart_sysc, }; -static struct omap_hwmod dm816x_uart1_hwmod = { +static struct omap_hwmod dm81xx_uart1_hwmod = { .name = "uart1", .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk10_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_UART_0_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_UART_0_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -211,20 +258,20 @@ static struct omap_hwmod dm816x_uart1_hwmod = { .flags = DEBUG_TI81XXUART1_FLAGS, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__uart1 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_uart1_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_uart1_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; -static struct omap_hwmod dm816x_uart2_hwmod = { +static struct omap_hwmod dm81xx_uart2_hwmod = { .name = "uart2", .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk10_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_UART_1_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_UART_1_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -232,20 +279,20 @@ static struct omap_hwmod dm816x_uart2_hwmod = { .flags = DEBUG_TI81XXUART2_FLAGS, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__uart2 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_uart2_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_uart2_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; -static struct omap_hwmod dm816x_uart3_hwmod = { +static struct omap_hwmod dm81xx_uart3_hwmod = { .name = "uart3", .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk10_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_UART_2_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_UART_2_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -253,9 +300,9 @@ static struct omap_hwmod dm816x_uart3_hwmod = { .flags = DEBUG_TI81XXUART3_FLAGS, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__uart3 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_uart3_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart3 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_uart3_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -276,23 +323,23 @@ static struct omap_hwmod_class wd_timer_class = { .reset = &omap2_wd_timer_reset, }; -static struct omap_hwmod dm816x_wd_timer_hwmod = { +static struct omap_hwmod dm81xx_wd_timer_hwmod = { .name = "wd_timer", .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk18_ck", .flags = HWMOD_NO_IDLEST, .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_WDTIMER_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_WDTIMER_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, .class = &wd_timer_class, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__wd_timer1 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_wd_timer_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__wd_timer1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_wd_timer_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -320,27 +367,27 @@ static struct omap_hwmod dm81xx_i2c1_hwmod = { .main_clk = "sysclk10_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_I2C_0_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_I2C_0_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, .class = &i2c_class, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__i2c1 = { - .master = &dm816x_l4_ls_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__i2c1 = { + .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_i2c1_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; -static struct omap_hwmod dm816x_i2c2_hwmod = { +static struct omap_hwmod dm81xx_i2c2_hwmod = { .name = "i2c2", .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk10_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_I2C_1_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_I2C_1_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -358,9 +405,9 @@ static struct omap_hwmod_class_sysconfig dm81xx_elm_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__i2c2 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_i2c2_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__i2c2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_i2c2_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -378,7 +425,7 @@ static struct omap_hwmod dm81xx_elm_hwmod = { }; static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_elm_hwmod, .user = OCP_USER_MPU, }; @@ -417,7 +464,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = { .main_clk = "sysclk6_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_GPIO_0_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_GPIO_0_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -427,7 +474,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = { }; static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio1_hwmod, .user = OCP_USER_MPU, }; @@ -443,7 +490,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = { .main_clk = "sysclk6_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_GPIO_1_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_GPIO_1_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -453,7 +500,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = { }; static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio2_hwmod, .user = OCP_USER_MPU, }; @@ -482,14 +529,14 @@ static struct omap_hwmod dm81xx_gpmc_hwmod = { .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_GPMC_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_GPMC_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = { - .master = &dm816x_alwon_l3_slow_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = { + .master = &dm81xx_alwon_l3_slow_hwmod, .slave = &dm81xx_gpmc_hwmod, .user = OCP_USER_MPU, }; @@ -522,7 +569,7 @@ static struct omap_hwmod dm81xx_usbss_hwmod = { }; static struct omap_hwmod_ocp_if dm81xx_default_l3_slow__usbss = { - .master = &dm816x_default_l3_slow_hwmod, + .master = &dm81xx_default_l3_slow_hwmod, .slave = &dm81xx_usbss_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, @@ -547,6 +594,22 @@ static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { .timer_capability = OMAP_TIMER_ALWON, }; +static struct omap_hwmod dm814x_timer1_hwmod = { + .name = "timer1", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer_sys_ck", + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm814x_timer1_hwmod, + .clk = "timer_sys_ck", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod dm816x_timer1_hwmod = { .name = "timer1", .clkdm_name = "alwon_l3s_clkdm", @@ -562,12 +625,28 @@ static struct omap_hwmod dm816x_timer1_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer1_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; +static struct omap_hwmod dm814x_timer2_hwmod = { + .name = "timer2", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer_sys_ck", + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm814x_timer2_hwmod, + .clk = "timer_sys_ck", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod dm816x_timer2_hwmod = { .name = "timer2", .clkdm_name = "alwon_l3s_clkdm", @@ -583,7 +662,7 @@ static struct omap_hwmod dm816x_timer2_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_ls__timer2 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer2_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, @@ -604,7 +683,7 @@ static struct omap_hwmod dm816x_timer3_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_ls__timer3 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer3_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, @@ -625,7 +704,7 @@ static struct omap_hwmod dm816x_timer4_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_ls__timer4 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer4_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, @@ -646,7 +725,7 @@ static struct omap_hwmod dm816x_timer5_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_ls__timer5 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer5_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, @@ -667,7 +746,7 @@ static struct omap_hwmod dm816x_timer6_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_ls__timer6 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer6_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, @@ -688,12 +767,68 @@ static struct omap_hwmod dm816x_timer7_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_ls__timer7 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer7_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; +/* CPSW on dm814x */ +static struct omap_hwmod_class_sysconfig dm814x_cpgmac_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x8, + .syss_offs = 0x4, + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSS_HAS_RESET_STATUS, + .idlemodes = SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE | + MSTANDBY_NO, + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class dm814x_cpgmac0_hwmod_class = { + .name = "cpgmac0", + .sysc = &dm814x_cpgmac_sysc, +}; + +static struct omap_hwmod dm814x_cpgmac0_hwmod = { + .name = "cpgmac0", + .class = &dm814x_cpgmac0_hwmod_class, + .clkdm_name = "alwon_ethernet_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "cpsw_125mhz_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_class dm814x_mdio_hwmod_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod dm814x_mdio_hwmod = { + .name = "davinci_mdio", + .class = &dm814x_mdio_hwmod_class, + .clkdm_name = "alwon_ethernet_clkdm", + .main_clk = "cpsw_125mhz_gclk", +}; + +static struct omap_hwmod_ocp_if dm814x_l4_hs__cpgmac0 = { + .master = &dm81xx_l4_hs_hwmod, + .slave = &dm814x_cpgmac0_hwmod, + .clk = "cpsw_125mhz_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if dm814x_cpgmac0__mdio = { + .master = &dm814x_cpgmac0_hwmod, + .slave = &dm814x_mdio_hwmod, + .user = OCP_USER_MPU, + .flags = HWMOD_NO_IDLEST, +}; + /* EMAC Ethernet */ static struct omap_hwmod_class_sysconfig dm816x_emac_sysc = { .rev_offs = 0x0, @@ -717,21 +852,21 @@ static struct omap_hwmod dm816x_emac0_hwmod = { .class = &dm816x_emac_hwmod_class, }; -static struct omap_hwmod_ocp_if dm816x_l4_hs__emac0 = { - .master = &dm816x_l4_hs_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = { + .master = &dm81xx_l4_hs_hwmod, .slave = &dm816x_emac0_hwmod, .clk = "sysclk5_ck", .user = OCP_USER_MPU, }; -static struct omap_hwmod_class dm816x_mdio_hwmod_class = { +static struct omap_hwmod_class dm81xx_mdio_hwmod_class = { .name = "davinci_mdio", .sysc = &dm816x_emac_sysc, }; -struct omap_hwmod dm816x_emac0_mdio_hwmod = { +static struct omap_hwmod dm81xx_emac0_mdio_hwmod = { .name = "davinci_mdio", - .class = &dm816x_mdio_hwmod_class, + .class = &dm81xx_mdio_hwmod_class, .clkdm_name = "alwon_ethernet_clkdm", .main_clk = "sysclk24_ck", .flags = HWMOD_NO_IDLEST, @@ -741,15 +876,15 @@ struct omap_hwmod dm816x_emac0_mdio_hwmod = { */ .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_ETHERNET_0_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -struct omap_hwmod_ocp_if dm816x_emac0__mdio = { - .master = &dm816x_l4_hs_hwmod, - .slave = &dm816x_emac0_mdio_hwmod, +static struct omap_hwmod_ocp_if dm81xx_emac0__mdio = { + .master = &dm81xx_l4_hs_hwmod, + .slave = &dm81xx_emac0_mdio_hwmod, .user = OCP_USER_MPU, }; @@ -768,7 +903,7 @@ static struct omap_hwmod dm816x_emac1_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = { - .master = &dm816x_l4_hs_hwmod, + .master = &dm81xx_l4_hs_hwmod, .slave = &dm816x_emac1_hwmod, .clk = "sysclk5_ck", .user = OCP_USER_MPU, @@ -815,7 +950,7 @@ static struct omap_hwmod dm816x_mmc1_hwmod = { }; static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_mmc1_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, @@ -843,13 +978,13 @@ static struct omap2_mcspi_dev_attr dm816x_mcspi1_dev_attr = { .num_chipselect = 4, }; -static struct omap_hwmod dm816x_mcspi1_hwmod = { +static struct omap_hwmod dm81xx_mcspi1_hwmod = { .name = "mcspi1", .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk10_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_SPI_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_SPI_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, @@ -857,14 +992,14 @@ static struct omap_hwmod dm816x_mcspi1_hwmod = { .dev_attr = &dm816x_mcspi1_dev_attr, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__mcspi1 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_mcspi1_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_mcspi1_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; -static struct omap_hwmod_class_sysconfig dm816x_mailbox_sysc = { +static struct omap_hwmod_class_sysconfig dm81xx_mailbox_sysc = { .rev_offs = 0x000, .sysc_offs = 0x010, .syss_offs = 0x014, @@ -874,55 +1009,55 @@ static struct omap_hwmod_class_sysconfig dm816x_mailbox_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_class dm816x_mailbox_hwmod_class = { +static struct omap_hwmod_class dm81xx_mailbox_hwmod_class = { .name = "mailbox", - .sysc = &dm816x_mailbox_sysc, + .sysc = &dm81xx_mailbox_sysc, }; -static struct omap_hwmod dm816x_mailbox_hwmod = { +static struct omap_hwmod dm81xx_mailbox_hwmod = { .name = "mailbox", .clkdm_name = "alwon_l3s_clkdm", - .class = &dm816x_mailbox_hwmod_class, + .class = &dm81xx_mailbox_hwmod_class, .main_clk = "sysclk6_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_MAILBOX_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_MAILBOX_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__mailbox = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_mailbox_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_mailbox_hwmod, .user = OCP_USER_MPU, }; -static struct omap_hwmod_class dm816x_tpcc_hwmod_class = { +static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = { .name = "tpcc", }; -struct omap_hwmod dm816x_tpcc_hwmod = { +static struct omap_hwmod dm81xx_tpcc_hwmod = { .name = "tpcc", - .class = &dm816x_tpcc_hwmod_class, + .class = &dm81xx_tpcc_hwmod_class, .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk4_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_TPCC_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_TPCC_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tpcc = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tpcc_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tpcc = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tpcc_hwmod, .clk = "sysclk4_ck", .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space dm816x_tptc0_addr_space[] = { +static struct omap_hwmod_addr_space dm81xx_tptc0_addr_space[] = { { .pa_start = 0x49800000, .pa_end = 0x49800000 + SZ_8K - 1, @@ -931,40 +1066,40 @@ static struct omap_hwmod_addr_space dm816x_tptc0_addr_space[] = { { }, }; -static struct omap_hwmod_class dm816x_tptc0_hwmod_class = { +static struct omap_hwmod_class dm81xx_tptc0_hwmod_class = { .name = "tptc0", }; -struct omap_hwmod dm816x_tptc0_hwmod = { +static struct omap_hwmod dm81xx_tptc0_hwmod = { .name = "tptc0", - .class = &dm816x_tptc0_hwmod_class, + .class = &dm81xx_tptc0_hwmod_class, .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk4_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_TPTC0_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_TPTC0_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc0 = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tptc0_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc0 = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tptc0_hwmod, .clk = "sysclk4_ck", - .addr = dm816x_tptc0_addr_space, + .addr = dm81xx_tptc0_addr_space, .user = OCP_USER_MPU, }; -struct omap_hwmod_ocp_if dm816x_tptc0__alwon_l3_fast = { - .master = &dm816x_tptc0_hwmod, - .slave = &dm816x_alwon_l3_fast_hwmod, +static struct omap_hwmod_ocp_if dm81xx_tptc0__alwon_l3_fast = { + .master = &dm81xx_tptc0_hwmod, + .slave = &dm81xx_alwon_l3_fast_hwmod, .clk = "sysclk4_ck", - .addr = dm816x_tptc0_addr_space, + .addr = dm81xx_tptc0_addr_space, .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space dm816x_tptc1_addr_space[] = { +static struct omap_hwmod_addr_space dm81xx_tptc1_addr_space[] = { { .pa_start = 0x49900000, .pa_end = 0x49900000 + SZ_8K - 1, @@ -973,40 +1108,40 @@ static struct omap_hwmod_addr_space dm816x_tptc1_addr_space[] = { { }, }; -static struct omap_hwmod_class dm816x_tptc1_hwmod_class = { +static struct omap_hwmod_class dm81xx_tptc1_hwmod_class = { .name = "tptc1", }; -struct omap_hwmod dm816x_tptc1_hwmod = { +static struct omap_hwmod dm81xx_tptc1_hwmod = { .name = "tptc1", - .class = &dm816x_tptc1_hwmod_class, + .class = &dm81xx_tptc1_hwmod_class, .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk4_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_TPTC1_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_TPTC1_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc1 = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tptc1_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc1 = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tptc1_hwmod, .clk = "sysclk4_ck", - .addr = dm816x_tptc1_addr_space, + .addr = dm81xx_tptc1_addr_space, .user = OCP_USER_MPU, }; -struct omap_hwmod_ocp_if dm816x_tptc1__alwon_l3_fast = { - .master = &dm816x_tptc1_hwmod, - .slave = &dm816x_alwon_l3_fast_hwmod, +static struct omap_hwmod_ocp_if dm81xx_tptc1__alwon_l3_fast = { + .master = &dm81xx_tptc1_hwmod, + .slave = &dm81xx_alwon_l3_fast_hwmod, .clk = "sysclk4_ck", - .addr = dm816x_tptc1_addr_space, + .addr = dm81xx_tptc1_addr_space, .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space dm816x_tptc2_addr_space[] = { +static struct omap_hwmod_addr_space dm81xx_tptc2_addr_space[] = { { .pa_start = 0x49a00000, .pa_end = 0x49a00000 + SZ_8K - 1, @@ -1015,40 +1150,40 @@ static struct omap_hwmod_addr_space dm816x_tptc2_addr_space[] = { { }, }; -static struct omap_hwmod_class dm816x_tptc2_hwmod_class = { +static struct omap_hwmod_class dm81xx_tptc2_hwmod_class = { .name = "tptc2", }; -struct omap_hwmod dm816x_tptc2_hwmod = { +static struct omap_hwmod dm81xx_tptc2_hwmod = { .name = "tptc2", - .class = &dm816x_tptc2_hwmod_class, + .class = &dm81xx_tptc2_hwmod_class, .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk4_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_TPTC2_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_TPTC2_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc2 = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tptc2_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc2 = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tptc2_hwmod, .clk = "sysclk4_ck", - .addr = dm816x_tptc2_addr_space, + .addr = dm81xx_tptc2_addr_space, .user = OCP_USER_MPU, }; -struct omap_hwmod_ocp_if dm816x_tptc2__alwon_l3_fast = { - .master = &dm816x_tptc2_hwmod, - .slave = &dm816x_alwon_l3_fast_hwmod, +static struct omap_hwmod_ocp_if dm81xx_tptc2__alwon_l3_fast = { + .master = &dm81xx_tptc2_hwmod, + .slave = &dm81xx_alwon_l3_fast_hwmod, .clk = "sysclk4_ck", - .addr = dm816x_tptc2_addr_space, + .addr = dm81xx_tptc2_addr_space, .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space dm816x_tptc3_addr_space[] = { +static struct omap_hwmod_addr_space dm81xx_tptc3_addr_space[] = { { .pa_start = 0x49b00000, .pa_end = 0x49b00000 + SZ_8K - 1, @@ -1057,50 +1192,96 @@ static struct omap_hwmod_addr_space dm816x_tptc3_addr_space[] = { { }, }; -static struct omap_hwmod_class dm816x_tptc3_hwmod_class = { +static struct omap_hwmod_class dm81xx_tptc3_hwmod_class = { .name = "tptc3", }; -struct omap_hwmod dm816x_tptc3_hwmod = { +static struct omap_hwmod dm81xx_tptc3_hwmod = { .name = "tptc3", - .class = &dm816x_tptc3_hwmod_class, + .class = &dm81xx_tptc3_hwmod_class, .clkdm_name = "alwon_l3s_clkdm", .main_clk = "sysclk4_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_TPTC3_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_TPTC3_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc3 = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tptc3_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc3 = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tptc3_hwmod, .clk = "sysclk4_ck", - .addr = dm816x_tptc3_addr_space, + .addr = dm81xx_tptc3_addr_space, .user = OCP_USER_MPU, }; -struct omap_hwmod_ocp_if dm816x_tptc3__alwon_l3_fast = { - .master = &dm816x_tptc3_hwmod, - .slave = &dm816x_alwon_l3_fast_hwmod, +static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = { + .master = &dm81xx_tptc3_hwmod, + .slave = &dm81xx_alwon_l3_fast_hwmod, .clk = "sysclk4_ck", - .addr = dm816x_tptc3_addr_space, + .addr = dm81xx_tptc3_addr_space, .user = OCP_USER_MPU, }; +/* + * REVISIT: Test and enable the following once clocks work: + * dm81xx_l4_ls__gpio1 + * dm81xx_l4_ls__gpio2 + * dm81xx_l4_ls__mailbox + * dm81xx_alwon_l3_slow__gpmc + * dm81xx_default_l3_slow__usbss + * + * Also note that some devices share a single clkctrl_offs.. + * For example, i2c1 and 3 share one, and i2c2 and 4 share one. + */ +static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { + &dm814x_mpu__alwon_l3_slow, + &dm814x_mpu__alwon_l3_med, + &dm81xx_alwon_l3_slow__l4_ls, + &dm81xx_alwon_l3_slow__l4_hs, + &dm81xx_l4_ls__uart1, + &dm81xx_l4_ls__uart2, + &dm81xx_l4_ls__uart3, + &dm81xx_l4_ls__wd_timer1, + &dm81xx_l4_ls__i2c1, + &dm81xx_l4_ls__i2c2, + &dm81xx_l4_ls__elm, + &dm81xx_l4_ls__mcspi1, + &dm81xx_alwon_l3_fast__tpcc, + &dm81xx_alwon_l3_fast__tptc0, + &dm81xx_alwon_l3_fast__tptc1, + &dm81xx_alwon_l3_fast__tptc2, + &dm81xx_alwon_l3_fast__tptc3, + &dm81xx_tptc0__alwon_l3_fast, + &dm81xx_tptc1__alwon_l3_fast, + &dm81xx_tptc2__alwon_l3_fast, + &dm81xx_tptc3__alwon_l3_fast, + &dm814x_l4_ls__timer1, + &dm814x_l4_ls__timer2, + &dm814x_l4_hs__cpgmac0, + &dm814x_cpgmac0__mdio, + NULL, +}; + +int __init dm814x_hwmod_init(void) +{ + omap_hwmod_init(); + return omap_hwmod_register_links(dm814x_hwmod_ocp_ifs); +} + static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm816x_mpu__alwon_l3_slow, &dm816x_mpu__alwon_l3_med, - &dm816x_alwon_l3_slow__l4_ls, - &dm816x_alwon_l3_slow__l4_hs, - &dm816x_l4_ls__uart1, - &dm816x_l4_ls__uart2, - &dm816x_l4_ls__uart3, - &dm816x_l4_ls__wd_timer1, - &dm816x_l4_ls__i2c1, - &dm816x_l4_ls__i2c2, + &dm81xx_alwon_l3_slow__l4_ls, + &dm81xx_alwon_l3_slow__l4_hs, + &dm81xx_l4_ls__uart1, + &dm81xx_l4_ls__uart2, + &dm81xx_l4_ls__uart3, + &dm81xx_l4_ls__wd_timer1, + &dm81xx_l4_ls__i2c1, + &dm81xx_l4_ls__i2c2, &dm81xx_l4_ls__gpio1, &dm81xx_l4_ls__gpio2, &dm81xx_l4_ls__elm, @@ -1112,26 +1293,26 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm816x_l4_ls__timer5, &dm816x_l4_ls__timer6, &dm816x_l4_ls__timer7, - &dm816x_l4_ls__mcspi1, - &dm816x_l4_ls__mailbox, - &dm816x_l4_hs__emac0, - &dm816x_emac0__mdio, + &dm81xx_l4_ls__mcspi1, + &dm81xx_l4_ls__mailbox, + &dm81xx_l4_hs__emac0, + &dm81xx_emac0__mdio, &dm816x_l4_hs__emac1, - &dm816x_alwon_l3_fast__tpcc, - &dm816x_alwon_l3_fast__tptc0, - &dm816x_alwon_l3_fast__tptc1, - &dm816x_alwon_l3_fast__tptc2, - &dm816x_alwon_l3_fast__tptc3, - &dm816x_tptc0__alwon_l3_fast, - &dm816x_tptc1__alwon_l3_fast, - &dm816x_tptc2__alwon_l3_fast, - &dm816x_tptc3__alwon_l3_fast, + &dm81xx_alwon_l3_fast__tpcc, + &dm81xx_alwon_l3_fast__tptc0, + &dm81xx_alwon_l3_fast__tptc1, + &dm81xx_alwon_l3_fast__tptc2, + &dm81xx_alwon_l3_fast__tptc3, + &dm81xx_tptc0__alwon_l3_fast, + &dm81xx_tptc1__alwon_l3_fast, + &dm81xx_tptc2__alwon_l3_fast, + &dm81xx_tptc3__alwon_l3_fast, &dm81xx_alwon_l3_slow__gpmc, &dm81xx_default_l3_slow__usbss, NULL, }; -int __init ti81xx_hwmod_init(void) +int __init dm816x_hwmod_init(void) { omap_hwmod_init(); return omap_hwmod_register_links(dm816x_hwmod_ocp_ifs); diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 821171cf6b7d..ea56397599c2 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -14,9 +14,18 @@ #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/ti_wilink_st.h> +#include <linux/wl12xx.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> +#include <linux/platform_data/wkup_m3.h> + +#include <asm/siginfo.h> +#include <asm/signal.h> #include "common.h" #include "common-board-devices.h" @@ -25,13 +34,14 @@ #include "omap_device.h" #include "omap-secure.h" #include "soc.h" +#include "hsmmc.h" struct pdata_init { const char *compatible; void (*fn)(void); }; -struct of_dev_auxdata omap_auxdata_lookup[]; +static struct of_dev_auxdata omap_auxdata_lookup[]; static struct twl4030_gpio_platform_data twl_gpio_auxdata; #ifdef CONFIG_MACH_NOKIA_N8X0 @@ -128,7 +138,7 @@ static void __init omap3_sbc_t3530_legacy_init(void) omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); } -struct ti_st_plat_data wilink_pdata = { +static struct ti_st_plat_data wilink_pdata = { .nshutdown_gpio = 137, .dev_name = "/dev/ttyO1", .flow_cntrl = 1, @@ -268,8 +278,136 @@ static void __init omap3_tao3530_legacy_init(void) { hsmmc2_internal_input_clk(); } + +/* omap3pandora legacy devices */ +#define PANDORA_WIFI_IRQ_GPIO 21 +#define PANDORA_WIFI_NRESET_GPIO 23 + +static struct platform_device pandora_backlight = { + .name = "pandora-backlight", + .id = -1, +}; + +static struct regulator_consumer_supply pandora_vmmc3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), +}; + +static struct regulator_init_data pandora_vmmc3 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), + .consumer_supplies = pandora_vmmc3_supply, +}; + +static struct fixed_voltage_config pandora_vwlan = { + .supply_name = "vwlan", + .microvolts = 1800000, /* 1.8V */ + .gpio = PANDORA_WIFI_NRESET_GPIO, + .startup_delay = 50000, /* 50ms */ + .enable_high = 1, + .init_data = &pandora_vmmc3, +}; + +static struct platform_device pandora_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &pandora_vwlan, + }, +}; + +static void pandora_wl1251_init_card(struct mmc_card *card) +{ + /* + * We have TI wl1251 attached to MMC3. Pass this information to + * SDIO core because it can't be probed by normal methods. + */ + if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { + card->quirks |= MMC_QUIRK_NONSTD_SDIO; + card->cccr.wide_bus = 1; + card->cis.vendor = 0x104c; + card->cis.device = 0x9066; + card->cis.blksize = 512; + card->cis.max_dtr = 24000000; + card->ocr = 0x80; + } +} + +static struct omap2_hsmmc_info pandora_mmc3[] = { + { + .mmc = 3, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .init_card = pandora_wl1251_init_card, + }, + {} /* Terminator */ +}; + +static void __init pandora_wl1251_init(void) +{ + struct wl1251_platform_data pandora_wl1251_pdata; + int ret; + + memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); + + pandora_wl1251_pdata.power_gpio = -1; + + ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); + if (ret < 0) + goto fail; + + pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); + if (pandora_wl1251_pdata.irq < 0) + goto fail_irq; + + pandora_wl1251_pdata.use_eeprom = true; + ret = wl1251_set_platform_data(&pandora_wl1251_pdata); + if (ret < 0) + goto fail_irq; + + return; + +fail_irq: + gpio_free(PANDORA_WIFI_IRQ_GPIO); +fail: + pr_err("wl1251 board initialisation failed\n"); +} + +static void __init omap3_pandora_legacy_init(void) +{ + platform_device_register(&pandora_backlight); + platform_device_register(&pandora_vwlan_device); + omap_hsmmc_init(pandora_mmc3); + omap_hsmmc_late_init(pandora_mmc3); + pandora_wl1251_init(); +} #endif /* CONFIG_ARCH_OMAP3 */ +#ifdef CONFIG_SOC_TI81XX +static int fault_fixed_up; + +static int t410_abort_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) { + pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", + addr, fsr); + fault_fixed_up = 1; + return 0; + } + + return 1; +} + +static void __init t410_abort_init(void) +{ + hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR, + "imprecise external abort"); +} +#endif + #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) static struct iommu_platform_data omap4_iommu_pdata = { .reset_name = "mmu_cache", @@ -278,6 +416,14 @@ static struct iommu_platform_data omap4_iommu_pdata = { }; #endif +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) +static struct wkup_m3_platform_data wkup_m3_data = { + .reset_name = "wkup_m3", + .assert_reset = omap_device_assert_hardreset, + .deassert_reset = omap_device_deassert_hardreset, +}; +#endif + #ifdef CONFIG_SOC_OMAP5 static void __init omap5_uevm_legacy_init(void) { @@ -323,7 +469,7 @@ static struct pdata_init auxdata_quirks[] __initdata = { { /* sentinel */ }, }; -struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { +static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #ifdef CONFIG_MACH_NOKIA_N8X0 OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL), OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data), @@ -340,6 +486,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", &am35xx_emac_pdata), #endif +#ifdef CONFIG_SOC_AM33XX + OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3", + &wkup_m3_data), +#endif #ifdef CONFIG_ARCH_OMAP4 OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata), @@ -353,6 +503,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #endif #ifdef CONFIG_SOC_AM43XX OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", + &wkup_m3_data), #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", @@ -381,6 +533,11 @@ static struct pdata_init pdata_quirks[] __initdata = { { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, + { "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, }, + { "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, }, +#endif +#ifdef CONFIG_SOC_TI81XX + { "hp,t410", t410_abort_init, }, #endif #ifdef CONFIG_SOC_OMAP5 { "ti,omap5-uevm", omap5_uevm_legacy_init, }, diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b1aad7e1426c..2a1a4180d5d0 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -25,6 +25,7 @@ #include <linux/sysfs.h> #include <linux/module.h> #include <linux/delay.h> +#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/irq.h> #include <linux/time.h> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 70bc7066a4c2..d31c495175c1 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -349,6 +349,41 @@ static struct powerdomain device_81xx_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain gem_814x_pwrdm = { + .name = "gem_pwrdm", + .prcm_offs = TI814X_PRM_DSP_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "dsp" }, +}; + +static struct powerdomain ivahd_814x_pwrdm = { + .name = "ivahd_pwrdm", + .prcm_offs = TI814X_PRM_HDVICP_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "iva" }, +}; + +static struct powerdomain hdvpss_814x_pwrdm = { + .name = "hdvpss_pwrdm", + .prcm_offs = TI814X_PRM_HDVPSS_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "dsp" }, +}; + +static struct powerdomain sgx_814x_pwrdm = { + .name = "sgx_pwrdm", + .prcm_offs = TI814X_PRM_GFX_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "core" }, +}; + +static struct powerdomain isp_814x_pwrdm = { + .name = "isp_pwrdm", + .prcm_offs = TI814X_PRM_ISP_MOD, + .pwrsts = PWRSTS_OFF_ON, + .voltdm = { .name = "core" }, +}; + static struct powerdomain active_816x_pwrdm = { .name = "active_pwrdm", .prcm_offs = TI816X_PRM_ACTIVE_MOD, @@ -448,7 +483,18 @@ static struct powerdomain *powerdomains_am35x[] __initdata = { NULL }; -static struct powerdomain *powerdomains_ti81xx[] __initdata = { +static struct powerdomain *powerdomains_ti814x[] __initdata = { + &alwon_81xx_pwrdm, + &device_81xx_pwrdm, + &gem_814x_pwrdm, + &ivahd_814x_pwrdm, + &hdvpss_814x_pwrdm, + &sgx_814x_pwrdm, + &isp_814x_pwrdm, + NULL +}; + +static struct powerdomain *powerdomains_ti816x[] __initdata = { &alwon_81xx_pwrdm, &device_81xx_pwrdm, &active_816x_pwrdm, @@ -460,6 +506,73 @@ static struct powerdomain *powerdomains_ti81xx[] __initdata = { NULL }; +/* TI81XX specific ops */ +#define TI81XX_PM_PWSTCTRL 0x0000 +#define TI81XX_RM_RSTCTRL 0x0010 +#define TI81XX_PM_PWSTST 0x0004 + +static int ti81xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, TI81XX_PM_PWSTCTRL); + return 0; +} + +static int ti81xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + TI81XX_PM_PWSTCTRL, + OMAP_POWERSTATE_MASK); +} + +static int ti81xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + (pwrdm->prcm_offs == TI814X_PRM_GFX_MOD) ? TI81XX_RM_RSTCTRL : + TI81XX_PM_PWSTST, + OMAP_POWERSTATEST_MASK); +} + +static int ti81xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + (pwrdm->prcm_offs == TI814X_PRM_GFX_MOD) ? TI81XX_RM_RSTCTRL : + TI81XX_PM_PWSTST, + OMAP3430_LOGICSTATEST_MASK); +} + +static int ti81xx_pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, + (pwrdm->prcm_offs == TI814X_PRM_GFX_MOD) ? TI81XX_RM_RSTCTRL : + TI81XX_PM_PWSTST) & + OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s timeout waiting for transition\n", + pwrdm->name); + return -EAGAIN; + } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + + return 0; +} + +/* For dm814x we need to fix up fix GFX pwstst and rstctrl reg offsets */ +static struct pwrdm_ops ti81xx_pwrdm_operations = { + .pwrdm_set_next_pwrst = ti81xx_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = ti81xx_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = ti81xx_pwrdm_read_pwrst, + .pwrdm_read_logic_pwrst = ti81xx_pwrdm_read_logic_pwrst, + .pwrdm_wait_transition = ti81xx_pwrdm_wait_transition, +}; + void __init omap3xxx_powerdomains_init(void) { unsigned int rev; @@ -467,15 +580,22 @@ void __init omap3xxx_powerdomains_init(void) if (!cpu_is_omap34xx() && !cpu_is_ti81xx()) return; - pwrdm_register_platform_funcs(&omap3_pwrdm_operations); + /* Only 81xx needs custom pwrdm_operations */ + if (!cpu_is_ti81xx()) + pwrdm_register_platform_funcs(&omap3_pwrdm_operations);; rev = omap_rev(); if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { pwrdm_register_pwrdms(powerdomains_am35x); + } else if (rev == TI8148_REV_ES1_0 || rev == TI8148_REV_ES2_0 || + rev == TI8148_REV_ES2_1) { + pwrdm_register_platform_funcs(&ti81xx_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_ti814x); } else if (rev == TI8168_REV_ES1_0 || rev == TI8168_REV_ES1_1 || rev == TI8168_REV_ES2_0 || rev == TI8168_REV_ES2_1) { - pwrdm_register_pwrdms(powerdomains_ti81xx); + pwrdm_register_platform_funcs(&ti81xx_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_ti816x); } else { pwrdm_register_pwrdms(powerdomains_omap3430_common); diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 6ae0b3a1781e..c8f590b7c32d 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -51,6 +51,12 @@ /* * TI81XX PRM module offsets */ +#define TI814X_PRM_DSP_MOD 0x0a00 +#define TI814X_PRM_HDVICP_MOD 0x0c00 +#define TI814X_PRM_ISP_MOD 0x0d00 +#define TI814X_PRM_HDVPSS_MOD 0x0e00 +#define TI814X_PRM_GFX_MOD 0x0f00 + #define TI81XX_PRM_DEVICE_MOD 0x0000 #define TI816X_PRM_ACTIVE_MOD 0x0a00 #define TI81XX_PRM_DEFAULT_MOD 0x0b00 @@ -472,6 +478,7 @@ struct omap_prcm_irq { * struct omap_prcm_irq_setup - PRCM interrupt controller details * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register + * @pm_ctrl: PRM register offset for the PRM_IO_PMCTRL register * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers * @nr_irqs: number of entries in the @irqs array * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs) @@ -494,6 +501,7 @@ struct omap_prcm_irq { struct omap_prcm_irq_setup { u16 ack; u16 mask; + u16 pm_ctrl; u8 nr_regs; u8 nr_irqs; const struct omap_prcm_irq *irqs; diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index 7eebc27fa892..7c34c44eb0ae 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -25,6 +25,13 @@ #define AM43XX_PRM_WKUP_INST 0x2000 #define AM43XX_PRM_DEVICE_INST 0x4000 +/* PRM_IRQ offsets */ +#define AM43XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004 +#define AM43XX_PRM_IRQENABLE_MPU_OFFSET 0x0008 + +/* Other PRM offsets */ +#define AM43XX_PRM_IO_PMCTRL_OFFSET 0x0024 + /* RM RSTCTRL offsets */ #define AM43XX_RM_PER_RSTCTRL_OFFSET 0x0010 #define AM43XX_RM_GFX_RSTCTRL_OFFSET 0x0010 diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 4541700f743a..30768003f854 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -18,13 +18,14 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/of_irq.h> - +#include <linux/of.h> #include "soc.h" #include "iomap.h" #include "common.h" #include "vp.h" #include "prm44xx.h" +#include "prcm43xx.h" #include "prm-regbits-44xx.h" #include "prcm44xx.h" #include "prminst44xx.h" @@ -45,6 +46,7 @@ static const struct omap_prcm_irq omap4_prcm_irqs[] = { static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .ack = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .mask = OMAP4_PRM_IRQENABLE_MPU_OFFSET, + .pm_ctrl = OMAP4_PRM_IO_PMCTRL_OFFSET, .nr_regs = 2, .irqs = omap4_prcm_irqs, .nr_irqs = ARRAY_SIZE(omap4_prcm_irqs), @@ -216,11 +218,11 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs) */ static void omap44xx_prm_read_pending_irqs(unsigned long *events) { - events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET, - OMAP4_PRM_IRQSTATUS_MPU_OFFSET); + int i; - events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET, - OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); + for (i = 0; i < omap4_prcm_irq_setup.nr_regs; i++) + events[i] = _read_pending_irq_reg(omap4_prcm_irq_setup.mask + + i * 4, omap4_prcm_irq_setup.ack + i * 4); } /** @@ -250,17 +252,17 @@ static void omap44xx_prm_ocp_barrier(void) */ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { - saved_mask[0] = - omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQENABLE_MPU_OFFSET); - saved_mask[1] = - omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); + int i; + u16 reg; + + for (i = 0; i < omap4_prcm_irq_setup.nr_regs; i++) { + reg = omap4_prcm_irq_setup.mask + i * 4; - omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); + saved_mask[i] = + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + reg); + omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, reg); + } /* OCP barrier */ omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, @@ -279,10 +281,12 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) */ static void omap44xx_prm_restore_irqen(u32 *saved_mask) { - omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQENABLE_MPU_OFFSET); - omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); + int i; + + for (i = 0; i < omap4_prcm_irq_setup.nr_regs; i++) + omap4_prm_write_inst_reg(saved_mask[i], + OMAP4430_PRM_OCP_SOCKET_INST, + omap4_prcm_irq_setup.mask + i * 4); } /** @@ -306,10 +310,10 @@ static void omap44xx_prm_reconfigure_io_chain(void) omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, OMAP4430_WUCLK_CTRL_MASK, inst, - OMAP4_PRM_IO_PMCTRL_OFFSET); + omap4_prcm_irq_setup.pm_ctrl); omap_test_timeout( (((omap4_prm_read_inst_reg(inst, - OMAP4_PRM_IO_PMCTRL_OFFSET) & + omap4_prcm_irq_setup.pm_ctrl) & OMAP4430_WUCLK_STATUS_MASK) >> OMAP4430_WUCLK_STATUS_SHIFT) == 1), MAX_IOPAD_LATCH_TIME, i); @@ -319,10 +323,10 @@ static void omap44xx_prm_reconfigure_io_chain(void) /* Trigger WUCLKIN disable */ omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0, inst, - OMAP4_PRM_IO_PMCTRL_OFFSET); + omap4_prcm_irq_setup.pm_ctrl); omap_test_timeout( (((omap4_prm_read_inst_reg(inst, - OMAP4_PRM_IO_PMCTRL_OFFSET) & + omap4_prcm_irq_setup.pm_ctrl) & OMAP4430_WUCLK_STATUS_MASK) >> OMAP4430_WUCLK_STATUS_SHIFT) == 0), MAX_IOPAD_LATCH_TIME, i); @@ -350,7 +354,7 @@ static void __init omap44xx_prm_enable_io_wakeup(void) omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK, OMAP4430_GLOBAL_WUEN_MASK, inst, - OMAP4_PRM_IO_PMCTRL_OFFSET); + omap4_prcm_irq_setup.pm_ctrl); } /** @@ -719,6 +723,15 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data) omap4_prminst_set_prm_dev_inst(data->device_inst_offset); + /* Add AM437X specific differences */ + if (of_device_is_compatible(data->np, "ti,am4-prcm")) { + omap4_prcm_irq_setup.nr_irqs = 1; + omap4_prcm_irq_setup.nr_regs = 1; + omap4_prcm_irq_setup.pm_ctrl = AM43XX_PRM_IO_PMCTRL_OFFSET; + omap4_prcm_irq_setup.ack = AM43XX_PRM_IRQSTATUS_MPU_OFFSET; + omap4_prcm_irq_setup.mask = AM43XX_PRM_IRQENABLE_MPU_OFFSET; + } + return prm_register(&omap44xx_prm_ll_data); } diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 7add7994dbfc..257e98c26618 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -696,6 +696,7 @@ static struct omap_prcm_init_data am4_prm_data __initdata = { .index = TI_CLKM_PRM, .init = omap44xx_prm_init, .device_inst_offset = AM43XX_PRM_DEVICE_INST, + .flags = PRM_HAS_IO_WAKEUP, }; #endif @@ -705,7 +706,7 @@ static struct omap_prcm_init_data scrm_data __initdata = { }; #endif -static const struct of_device_id omap_prcm_dt_match_table[] __initconst = { +static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = { #ifdef CONFIG_SOC_AM33XX { .compatible = "ti,am3-prcm", .data = &am3_prm_data }, #endif diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index ad1bb9431e94..9b09d85d811a 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -333,14 +333,12 @@ ENDPROC(omap4_cpu_resume) #endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */ -ENTRY(omap_bus_sync) - ret lr -ENDPROC(omap_bus_sync) - ENTRY(omap_do_wfi) stmfd sp!, {lr} +#ifdef CONFIG_OMAP_INTERCONNECT_BARRIER /* Drain interconnect write buffers. */ - bl omap_bus_sync + bl omap_interconnect_sync +#endif /* * Execute an ISB instruction to ensure that all of the diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index cac46d852da1..e4d8701f99f9 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -102,38 +102,38 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles, return 0; } -static void omap2_gp_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int omap2_gp_timer_shutdown(struct clock_event_device *evt) +{ + __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); + return 0; +} + +static int omap2_gp_timer_set_periodic(struct clock_event_device *evt) { u32 period; __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - period = clkev.rate / HZ; - period -= 1; - /* Looks like we need to first set the load value separately */ - __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, - 0xffffffff - period, OMAP_TIMER_POSTED); - __omap_dm_timer_load_start(&clkev, - OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, - 0xffffffff - period, OMAP_TIMER_POSTED); - break; - case CLOCK_EVT_MODE_ONESHOT: - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } + period = clkev.rate / HZ; + period -= 1; + /* Looks like we need to first set the load value separately */ + __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period, + OMAP_TIMER_POSTED); + __omap_dm_timer_load_start(&clkev, + OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, + 0xffffffff - period, OMAP_TIMER_POSTED); + return 0; } static struct clock_event_device clockevent_gpt = { - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = omap2_gp_timer_set_next_event, - .set_mode = omap2_gp_timer_set_mode, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .rating = 300, + .set_next_event = omap2_gp_timer_set_next_event, + .set_state_shutdown = omap2_gp_timer_shutdown, + .set_state_periodic = omap2_gp_timer_set_periodic, + .set_state_oneshot = omap2_gp_timer_shutdown, + .tick_resume = omap2_gp_timer_shutdown, }; static struct property device_disabled = { @@ -208,8 +208,7 @@ static void __init omap_dmtimer_init(void) /* If we are a secure device, remove any secure timer nodes */ if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); - if (np) - of_node_put(np); + of_node_put(np); } } @@ -649,23 +648,10 @@ static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); void __init omap4_local_timer_init(void) { omap4_sync32k_timer_init(); - /* Local timers are not supprted on OMAP4430 ES1.0 */ - if (omap_rev() != OMAP4430_REV_ES1_0) { - int err; - - if (of_have_populated_dt()) { - clocksource_of_init(); - return; - } - - err = twd_local_timer_register(&twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); - } + clocksource_of_init(); } #else void __init omap4_local_timer_init(void) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 076fd20d7e5a..e5a35f6b83a7 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -563,7 +563,7 @@ struct i2c_init_data { u8 hsscll_12; }; -static const __initdata struct i2c_init_data omap4_i2c_timing_data[] = { +static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = { { .load = 50, .loadbits = 0x3, diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 261bb7cb4e60..307676d8c53c 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -95,7 +95,7 @@ static struct voltagedomain *voltagedomains_am35xx[] __initdata = { }; -static const char *sys_clk_name __initdata = "sys_ck"; +static const char *const sys_clk_name __initconst = "sys_ck"; void __init omap3xxx_voltagedomains_init(void) { diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 48b22a0a0c88..9b1f245b57d6 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -92,7 +92,7 @@ static struct voltagedomain *voltagedomains_omap4[] __initdata = { NULL, }; -static const char *sys_clk_name __initdata = "sys_clkin_ck"; +static const char *const sys_clk_name __initconst = "sys_clkin_ck"; void __init omap44xx_voltagedomains_init(void) { diff --git a/arch/arm/mach-omap2/voltagedomains54xx_data.c b/arch/arm/mach-omap2/voltagedomains54xx_data.c index 33d22b87252d..af5ff6496441 100644 --- a/arch/arm/mach-omap2/voltagedomains54xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains54xx_data.c @@ -78,7 +78,7 @@ static struct voltagedomain *voltagedomains_omap5[] __initdata = { NULL, }; -static const char *sys_clk_name __initdata = "sys_clkin"; +static const char *const sys_clk_name __initconst = "sys_clkin"; void __init omap54xx_voltagedomains_init(void) { |