aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/opp2430_data.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/opp2430_data.c')
-rw-r--r--arch/arm/mach-omap2/opp2430_data.c133
1 files changed, 133 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
new file mode 100644
index 000000000000..1b9596ae201e
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -0,0 +1,133 @@
+/*
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratios' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
+ *
+ * THe format described in this file is deprecated. Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#include "opp2xxx.h"
+#include "sdrc.h"
+#include "clock.h"
+
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on 2430-SDPs variants available. There are
+ * quite a few more rate combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ */
+const struct prcm_config omap2430_rate_table[] = {
+ /* PRCM #4 - ratio2 (ES2.1) - FAST */
+ {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
+ R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+ R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #2 - ratio1 (ES2) - FAST */
+ {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_165MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5a - ratio1 - FAST */
+ {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5b - ratio1 - FAST */
+ {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_100MHz,
+ RATE_IN_243X},
+
+ /* PRCM #4 - ratio1 (ES2.1) - SLOW */
+ {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
+ R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+ R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #2 - ratio1 (ES2) - SLOW */
+ {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_165MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5a - ratio1 - SLOW */
+ {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_133MHz,
+ RATE_IN_243X},
+
+ /* PRCM #5b - ratio1 - SLOW*/
+ {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
+ R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+ R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_100MHz,
+ RATE_IN_243X},
+
+ /* PRCM-boot/bypass */
+ {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
+ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+ RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_243X},
+
+ /* PRCM-boot/bypass */
+ {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
+ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+ RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+ MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+ SDRC_RFR_CTRL_BYPASS,
+ RATE_IN_243X},
+
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};