diff options
Diffstat (limited to 'arch/arm/mach-omap2/control.h')
| -rw-r--r-- | arch/arm/mach-omap2/control.h | 46 |
1 files changed, 30 insertions, 16 deletions
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a406fd045ce1..b8cdc8531b60 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -21,6 +21,8 @@ #include <mach/ctrl_module_pad_core_44xx.h> #include <mach/ctrl_module_pad_wkup_44xx.h> +#include <plat/am33xx.h> + #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) @@ -28,6 +30,8 @@ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define AM33XX_CTRL_REGADDR(reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg)) #else #define OMAP242X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) @@ -35,6 +39,8 @@ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define AM33XX_CTRL_REGADDR(reg) \ + AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg)) #endif /* __ASSEMBLY__ */ /* @@ -182,6 +188,7 @@ #define OMAP3630_CONTROL_FUSE_OPP120_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120) #define OMAP3630_CONTROL_FUSE_OPP50_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128) #define OMAP3630_CONTROL_FUSE_OPP100_VDD2 (OMAP2_CONTROL_GENERAL + 0x012C) +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL (OMAP2_CONTROL_GENERAL + 0x02f0) /* OMAP44xx control efuse offsets */ #define OMAP44XX_CONTROL_FUSE_IVA_OPP50 0x22C @@ -246,6 +253,10 @@ /* TI81XX CONTROL_DEVCONF register offsets */ #define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000) +/* OMAP54XX CONTROL STATUS register */ +#define OMAP5XXX_CONTROL_STATUS 0x134 +#define OMAP5_DEVICETYPE_MASK (0x7 << 6) + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. @@ -312,15 +323,15 @@ OMAP343X_SCRATCHPAD + reg) /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */ -#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 -#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 -#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 -#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 -#define AM35XX_USBOTG_FCLK_SHIFT 8 -#define AM35XX_CPGMAC_FCLK_SHIFT 9 -#define AM35XX_VPFE_FCLK_SHIFT 10 - -/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/ +#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 +#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 +#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 +#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 +#define AM35XX_USBOTG_FCLK_SHIFT 8 +#define AM35XX_CPGMAC_FCLK_SHIFT 9 +#define AM35XX_VPFE_FCLK_SHIFT 10 + +/* AM35XX CONTROL_LVL_INTR_CLEAR bits */ #define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0) #define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1) #define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2) @@ -330,21 +341,22 @@ #define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6) #define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7) -/*AM35XX CONTROL_IP_SW_RESET bits*/ +/* AM35XX CONTROL_IP_SW_RESET bits */ #define AM35XX_USBOTGSS_SW_RST BIT(0) #define AM35XX_CPGMACSS_SW_RST BIT(1) #define AM35XX_VPFE_VBUSP_SW_RST BIT(2) #define AM35XX_HECC_SW_RST BIT(3) #define AM35XX_VPFE_PCLK_SW_RST BIT(4) -/* - * CONTROL AM33XX STATUS register - */ +/* AM33XX CONTROL_STATUS register */ #define AM33XX_CONTROL_STATUS 0x040 +#define AM33XX_CONTROL_SEC_CLK_CTRL 0x1bc -/* - * CONTROL OMAP STATUS register to identify OMAP3 features - */ +/* AM33XX CONTROL_STATUS bitfields (partial) */ +#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT 22 +#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK (0x3 << 22) + +/* CONTROL OMAP STATUS register to identify OMAP3 features */ #define OMAP3_CONTROL_OMAP_STATUS 0x044c #define OMAP3_SGX_SHIFT 13 @@ -397,6 +409,8 @@ extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); extern void omap3_ctrl_write_boot_mode(u8 bootmode); +extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); +extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); #else |