diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3beagle.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 60 |
1 files changed, 46 insertions, 14 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 08b0816afa61..231cb4ec1847 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -29,7 +29,7 @@ #include <linux/mtd/nand.h> #include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -37,14 +37,14 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/nand.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/timer-gp.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/usb.h> +#include <plat/timer-gp.h> +#include "mux.h" #include "mmc-twl4030.h" #define GPMC_CS0_BASE 0x60 @@ -140,10 +140,10 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_cfg_reg(AG9_34XX_GPIO23); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { - omap_cfg_reg(AH8_34XX_GPIO29); + omap_mux_init_gpio(29, OMAP_PIN_INPUT); } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -254,6 +254,15 @@ static struct twl4030_usb_data beagle_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; +static struct twl4030_codec_audio_data beagle_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data beagle_codec_data = { + .audio_mclk = 26000000, + .audio = &beagle_audio_data, +}; + static struct twl4030_platform_data beagle_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -261,6 +270,7 @@ static struct twl4030_platform_data beagle_twldata = { /* platform_data for children goes here */ .usb = &beagle_usb_data, .gpio = &beagle_gpio_data, + .codec = &beagle_codec_data, .vmmc1 = &beagle_vmmc1, .vsim = &beagle_vsim, .vdac = &beagle_vdac, @@ -400,24 +410,46 @@ static void __init omap3beagle_flash_init(void) } } +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_beagle_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_serial_init(); - omap_cfg_reg(J25_34XX_GPIO170); + omap_mux_init_gpio(170, OMAP_PIN_INPUT); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); usb_musb_init(); + usb_ehci_init(&ehci_pdata); omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3_beagle_map_io(void) @@ -429,7 +461,7 @@ static void __init omap3_beagle_map_io(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_beagle_map_io, .init_irq = omap3_beagle_init_irq, |