diff options
Diffstat (limited to 'arch/arm/mach-mx2/devices.c')
| -rw-r--r-- | arch/arm/mach-mx2/devices.c | 503 |
1 files changed, 0 insertions, 503 deletions
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c deleted file mode 100644 index a0aeb8a4adc1..000000000000 --- a/arch/arm/mach-mx2/devices.c +++ /dev/null @@ -1,503 +0,0 @@ -/* - * Author: MontaVista Software, Inc. - * <source@mvista.com> - * - * Based on the OMAP devices.c - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/dma-mapping.h> - -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/mmc.h> - -#include "devices.h" - -/* - * SPI master controller - * - * - i.MX1: 2 channel (slighly different register setting) - * - i.MX21: 2 channel - * - i.MX27: 3 channel - */ -#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \ - static struct resource mxc_spi_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - }, \ - }; \ - \ - struct platform_device mxc_spi_device ## n = { \ - .name = "spi_imx", \ - .id = n, \ - .num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \ - .resource = mxc_spi_resources ## n, \ - } - -DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1); -DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2); - -#ifdef CONFIG_MACH_MX27 -DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3); -#endif - -/* - * General Purpose Timer - * - i.MX21: 3 timers - * - i.MX27: 6 timers - */ -#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq) \ - static struct resource timer ## n ##_resources[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - } \ - }; \ - \ - struct platform_device mxc_gpt ## n = { \ - .name = "imx_gpt", \ - .id = n, \ - .num_resources = ARRAY_SIZE(timer ## n ## _resources), \ - .resource = timer ## n ## _resources, \ - } - -/* We use gpt1 as system timer, so do not add a device for this one */ -DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2); -DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3); - -#ifdef CONFIG_MACH_MX27 -DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4); -DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5); -DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6); -#endif - -/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */ -static struct resource mxc_wdt_resources[] = { - { - .start = MX2x_WDOG_BASE_ADDR, - .end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_wdt = { - .name = "imx2-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_wdt_resources), - .resource = mxc_wdt_resources, -}; - -static struct resource mxc_w1_master_resources[] = { - { - .start = MX2x_OWIRE_BASE_ADDR, - .end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_w1_master_device = { - .name = "mxc_w1", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_w1_master_resources), - .resource = mxc_w1_master_resources, -}; - -#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \ - static struct resource pfx ## _nand_resources[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - }, \ - }; \ - \ - struct platform_device pfx ## _nand_device = { \ - .name = "mxc_nand", \ - .id = 0, \ - .num_resources = ARRAY_SIZE(pfx ## _nand_resources), \ - .resource = pfx ## _nand_resources, \ - } - -#ifdef CONFIG_MACH_MX21 -DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC); -#endif - -#ifdef CONFIG_MACH_MX27 -DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC); -#endif - -/* - * lcdc: - * - i.MX1: the basic controller - * - i.MX21: to be checked - * - i.MX27: like i.MX1, with slightly variations - */ -static struct resource mxc_fb[] = { - { - .start = MX2x_LCDC_BASE_ADDR, - .end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_LCDC, - .end = MX2x_INT_LCDC, - .flags = IORESOURCE_IRQ, - } -}; - -/* mxc lcd driver */ -struct platform_device mxc_fb_device = { - .name = "imx-fb", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fb), - .resource = mxc_fb, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#ifdef CONFIG_MACH_MX27 -static struct resource mxc_fec_resources[] = { - { - .start = MX27_FEC_BASE_ADDR, - .end = MX27_FEC_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_FEC, - .end = MX27_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fec_resources), - .resource = mxc_fec_resources, -}; -#endif - -#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \ - static struct resource mxc_i2c_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - } \ - }; \ - \ - struct platform_device mxc_i2c_device ## n = { \ - .name = "imx-i2c", \ - .id = n, \ - .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \ - .resource = mxc_i2c_resources ## n, \ - } - -DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C); - -#ifdef CONFIG_MACH_MX27 -DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2); -#endif - -static struct resource mxc_pwm_resources[] = { - { - .start = MX2x_PWM_BASE_ADDR, - .end = MX2x_PWM_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX2x_INT_PWM, - .end = MX2x_INT_PWM, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device mxc_pwm_device = { - .name = "mxc_pwm", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_pwm_resources), - .resource = mxc_pwm_resources, -}; - -#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq) \ - static struct resource mxc_sdhc_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irq, \ - .end = irq, \ - .flags = IORESOURCE_IRQ, \ - }, { \ - .start = dmareq, \ - .end = dmareq, \ - .flags = IORESOURCE_DMA, \ - }, \ - }; \ - \ - static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32); \ - \ - struct platform_device mxc_sdhc_device ## n = { \ - .name = "mxc-mmc", \ - .id = n, \ - .dev = { \ - .dma_mask = &mxc_sdhc ## n ## _dmamask, \ - .coherent_dma_mask = DMA_BIT_MASK(32), \ - }, \ - .num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n), \ - .resource = mxc_sdhc_resources ## n, \ - } - -DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1); -DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2); - -#ifdef CONFIG_MACH_MX27 -static struct resource otg_resources[] = { - { - .start = MX27_USBOTG_BASE_ADDR, - .end = MX27_USBOTG_BASE_ADDR + 0x1ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_USB3, - .end = MX27_INT_USB3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 otg_dmamask = DMA_BIT_MASK(32); - -/* OTG gadget device */ -struct platform_device mxc_otg_udc_device = { - .name = "fsl-usb2-udc", - .id = -1, - .dev = { - .dma_mask = &otg_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* OTG host */ -struct platform_device mxc_otg_host = { - .name = "mxc-ehci", - .id = 0, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &otg_dmamask, - }, - .resource = otg_resources, - .num_resources = ARRAY_SIZE(otg_resources), -}; - -/* USB host 1 */ - -static u64 usbh1_dmamask = DMA_BIT_MASK(32); - -static struct resource mxc_usbh1_resources[] = { - { - .start = MX27_USBOTG_BASE_ADDR + 0x200, - .end = MX27_USBOTG_BASE_ADDR + 0x3ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_USB1, - .end = MX27_INT_USB1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh1 = { - .name = "mxc-ehci", - .id = 1, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &usbh1_dmamask, - }, - .resource = mxc_usbh1_resources, - .num_resources = ARRAY_SIZE(mxc_usbh1_resources), -}; - -/* USB host 2 */ -static u64 usbh2_dmamask = DMA_BIT_MASK(32); - -static struct resource mxc_usbh2_resources[] = { - { - .start = MX27_USBOTG_BASE_ADDR + 0x400, - .end = MX27_USBOTG_BASE_ADDR + 0x5ff, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_USB2, - .end = MX27_INT_USB2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_usbh2 = { - .name = "mxc-ehci", - .id = 2, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &usbh2_dmamask, - }, - .resource = mxc_usbh2_resources, - .num_resources = ARRAY_SIZE(mxc_usbh2_resources), -}; -#endif - -#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \ - { \ - .name = _name, \ - .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ - .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ - .flags = IORESOURCE_DMA, \ - } - -#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \ - static struct resource imx_ssi_resources ## n[] = { \ - { \ - .start = MX2x_SSI ## ssin ## _BASE_ADDR, \ - .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = MX2x_INT_SSI1, \ - .end = MX2x_INT_SSI1, \ - .flags = IORESOURCE_IRQ, \ - }, \ - DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \ - DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \ - DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \ - DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \ - }; \ - \ - struct platform_device imx_ssi_device ## n = { \ - .name = "imx-ssi", \ - .id = n, \ - .num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \ - .resource = imx_ssi_resources ## n, \ - } - -DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); -DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); - -/* GPIO port description */ -#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \ - { \ - .chip.label = "gpio-" #n, \ - .irq = _irq, \ - .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \ - n * 0x100), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \ - } - -#define DEFINE_MXC_GPIO_PORT(SOC, n) \ - { \ - .chip.label = "gpio-" #n, \ - .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \ - n * 0x100), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \ - } - -#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \ - static struct mxc_gpio_port pfx ## _gpio_ports[] = { \ - DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \ - DEFINE_MXC_GPIO_PORT(SOC, 1), \ - DEFINE_MXC_GPIO_PORT(SOC, 2), \ - DEFINE_MXC_GPIO_PORT(SOC, 3), \ - DEFINE_MXC_GPIO_PORT(SOC, 4), \ - DEFINE_MXC_GPIO_PORT(SOC, 5), \ - } - -#ifdef CONFIG_MACH_MX21 -DEFINE_MXC_GPIO_PORTS(MX21, imx21); -#endif - -#ifdef CONFIG_MACH_MX27 -DEFINE_MXC_GPIO_PORTS(MX27, imx27); -#endif - -int __init mxc_register_gpios(void) -{ -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) - return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); - else -#endif - return 0; -} - -#ifdef CONFIG_MACH_MX21 -static struct resource mx21_usbhc_resources[] = { - { - .start = MX21_USBOTG_BASE_ADDR, - .end = MX21_USBOTG_BASE_ADDR + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MX21_INT_USBHOST, - .end = MX21_INT_USBHOST, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx21_usbhc_device = { - .name = "imx21-hcd", - .id = 0, - .dev = { - .dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mx21_usbhc_resources), - .resource = mx21_usbhc_resources, -}; -#endif - |