1 files changed, 0 insertions, 553 deletions
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
deleted file mode 100644
index fba5047de8b1..000000000000
--- a/arch/arm/mach-imx/devices.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * Author: MontaVista Software, Inc.
- *       <source@mvista.com>
- *
- * Based on the OMAP devices.c
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-#if defined(CONFIG_ARCH_MX1)
-static struct resource imx1_camera_resources[] = {
-	{
-		.start  = 0x00224000,
-		.end    = 0x00224010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_CSI_INT,
-		.end    = MX1_CSI_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device imx1_camera_device = {
-	.name           = "mx1-camera",
-	.id             = 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask = &imx1_camera_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource       = imx1_camera_resources,
-	.num_resources  = ARRAY_SIZE(imx1_camera_resources),
-};
-
-static struct resource imx_rtc_resources[] = {
-	{
-		.start  = 0x00204000,
-		.end    = 0x00204024,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_RTC_INT,
-		.end    = MX1_RTC_INT,
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = MX1_RTC_SAMINT,
-		.end    = MX1_RTC_SAMINT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_rtc_device = {
-	.name           = "rtc-imx",
-	.id             = 0,
-	.resource       = imx_rtc_resources,
-	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
-	{
-		.start  = 0x00201000,
-		.end    = 0x00201008,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_WDT_INT,
-		.end    = MX1_WDT_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_wdt_device = {
-	.name           = "imx-wdt",
-	.id             = 0,
-	.resource       = imx_wdt_resources,
-	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
-};
-
-static struct resource imx_usb_resources[] = {
-	{
-		.start	= 0x00212000,
-		.end	= 0x00212148,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MX1_USBD_INT0,
-		.end	= MX1_USBD_INT0,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT1,
-		.end	= MX1_USBD_INT1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT2,
-		.end	= MX1_USBD_INT2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT3,
-		.end	= MX1_USBD_INT3,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT4,
-		.end	= MX1_USBD_INT4,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT5,
-		.end	= MX1_USBD_INT5,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT6,
-		.end	= MX1_USBD_INT6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_usb_device = {
-	.name		= "imx_udc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_usb_resources),
-	.resource	= imx_usb_resources,
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
-		.irq = MX1_GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
-		.irq = MX1_GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
-		.irq = MX1_GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
-		.irq = MX1_GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}
-};
-
-int __init imx1_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-#endif
-
-#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-
-#ifdef CONFIG_MACH_MX27
-static struct resource mx27_camera_resources[] = {
-	{
-	       .start = MX27_CSI_BASE_ADDR,
-	       .end = MX27_CSI_BASE_ADDR + 0x1f,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MX27_EMMA_PRP_BASE_ADDR,
-	       .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MX27_INT_CSI,
-	       .end = MX27_INT_CSI,
-	       .flags = IORESOURCE_IRQ,
-	},{
-	       .start = MX27_INT_EMMAPRP,
-	       .end = MX27_INT_EMMAPRP,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-struct platform_device mx27_camera_device = {
-	.name = "mx2-camera",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mx27_camera_resources),
-	.resource = mx27_camera_resources,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-#endif
-
-/*
- * General Purpose Timer
- * - i.MX21: 3 timers
- * - i.MX27: 6 timers
- */
-#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
-	static struct resource timer ## n ##_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_gpt ## n = {				\
-		.name = "imx_gpt",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
-		.resource = timer ## n ## _resources,			\
-	}
-
-/* We use gpt1 as system timer, so do not add a device for this one */
-DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
-DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
-DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
-DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
-#endif
-
-/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
-static struct resource mxc_wdt_resources[] = {
-	{
-		.start = MX2x_WDOG_BASE_ADDR,
-		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdt = {
-	.name = "imx2-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
-	.resource = mxc_wdt_resources,
-};
-
-static struct resource mxc_w1_master_resources[] = {
-	{
-		.start = MX2x_OWIRE_BASE_ADDR,
-		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_w1_master_device = {
-	.name = "mxc_w1",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
-	.resource = mxc_w1_master_resources,
-};
-
-/*
- * lcdc:
- * - i.MX1: the basic controller
- * - i.MX21: to be checked
- * - i.MX27: like i.MX1, with slightly variations
- */
-static struct resource mxc_fb[] = {
-	{
-		.start = MX2x_LCDC_BASE_ADDR,
-		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_LCDC,
-		.end = MX2x_INT_LCDC,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* mxc lcd driver */
-struct platform_device mxc_fb_device = {
-	.name = "imx-fb",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fb),
-	.resource = mxc_fb,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource mxc_pwm_resources[] = {
-	{
-		.start = MX2x_PWM_BASE_ADDR,
-		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_PWM,
-		.end = MX2x_INT_PWM,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device = {
-	.name = "mxc_pwm",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources,
-};
-
-#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
-	static struct resource mxc_sdhc_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}, {							\
-			.start = dmareq,				\
-			.end = dmareq,					\
-			.flags = IORESOURCE_DMA,			\
-		},							\
-	};								\
-									\
-	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
-									\
-	struct platform_device mxc_sdhc_device ## n = {			\
-		.name = "mxc-mmc",					\
-		.id = n,						\
-		.dev = {						\
-			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
-			.coherent_dma_mask = DMA_BIT_MASK(32),		\
-		},							\
-		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
-		.resource = mxc_sdhc_resources ## n,		\
-	}
-
-DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
-DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
-
-#ifdef CONFIG_MACH_MX27
-static struct resource otg_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR,
-		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB3,
-		.end = MX27_INT_USB3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &otg_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= otg_resources,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &otg_dmamask,
-	},
-	.resource = otg_resources,
-	.num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh1_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x200,
-		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB1,
-		.end = MX27_INT_USB1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1 = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh1_dmamask,
-	},
-	.resource = mxc_usbh1_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x400,
-		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB2,
-		.end = MX27_INT_USB2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2 = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh2_dmamask,
-	},
-	.resource = mxc_usbh2_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-#endif
-
-/* GPIO port description */
-#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.irq = _irq,						\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
-	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
-		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
-		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_GPIO_PORTS(MX21, imx21);
-
-int __init imx21_register_gpios(void)
-{
-	return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-
-int __init imx27_register_gpios(void)
-{
-	return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX21
-static struct resource mx21_usbhc_resources[] = {
-	{
-		.start	= MX21_USBOTG_BASE_ADDR,
-		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start		= MX21_INT_USBHOST,
-		.end		= MX21_INT_USBHOST,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx21_usbhc_device = {
-	.name		= "imx21-hcd",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(mx21_usbhc_resources),
-	.resource	= mx21_usbhc_resources,
-};
-#endif
-
-static struct resource imx_kpp_resources[] = {
-	{
-		.start  = MX2x_KPP_BASE_ADDR,
-		.end    = MX2x_KPP_BASE_ADDR + 0xf,
-		.flags  = IORESOURCE_MEM
-	}, {
-		.start  = MX2x_INT_KPP,
-		.end    = MX2x_INT_KPP,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_kpp_device = {
-	.name = "imx-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(imx_kpp_resources),
-	.resource = imx_kpp_resources,
-};
-
-#endif