aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-exynos/include/mach/entry-macro.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-exynos/include/mach/entry-macro.S')
-rw-r--r--arch/arm/mach-exynos/include/mach/entry-macro.S75
1 files changed, 0 insertions, 75 deletions
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index f5e9fd8e37b4..3ba4f547534b 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -9,83 +9,8 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- mov \tmp, #0
-
- mrc p15, 0, \base, c0, c0, 5
- and \base, \base, #3
- cmp \base, #0
- beq 1f
-
- ldr \tmp, =gic_bank_offset
- ldr \tmp, [\tmp]
- cmp \base, #1
- beq 1f
-
- cmp \base, #2
- addeq \tmp, \tmp, \tmp
- addne \tmp, \tmp, \tmp, LSL #1
-
-1: ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- add \base, \base, \tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
- ldr \tmp, =1021
-
- bic \irqnr, \irqstat, #0x1c00
-
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
- addne \irqnr, \irqnr, #32
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm