3 files changed, 0 insertions, 90 deletions
diff --git a/arch/arm/include/asm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h
deleted file mode 100644
index ea6d063923b8..000000000000
--- a/arch/arm/include/asm/mach/serial_at91.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/serial_at91.h
- *
- *  Based on serial_sa1100.h  by Nicolas Pitre
- *
- *  Copyright (C) 2002 ATMEL Rousset
- *
- *  Low level machine dependent UART functions.
- */
-
-struct uart_port;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct atmel_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*enable_ms)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-	int	(*open)(struct uart_port *);
-	void	(*close)(struct uart_port *);
-};
-
-#if defined(CONFIG_SERIAL_ATMEL)
-void atmel_register_uart_fns(struct atmel_port_fns *fns);
-#else
-#define atmel_register_uart_fns(fns) do { } while (0)
-#endif
-
-
diff --git a/arch/arm/include/asm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h
deleted file mode 100644
index d09064bf95a0..000000000000
--- a/arch/arm/include/asm/mach/serial_sa1100.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/serial_sa1100.h
- *
- *  Author: Nicolas Pitre
- *
- * Moved and changed lots, Russell King
- *
- * Low level machine dependent UART functions.
- */
-
-struct uart_port;
-struct uart_info;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct sa1100_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-};
-
-#ifdef CONFIG_SERIAL_SA1100
-void sa1100_register_uart_fns(struct sa1100_port_fns *fns);
-void sa1100_register_uart(int idx, int port);
-#else
-#define sa1100_register_uart_fns(fns) do { } while (0)
-#define sa1100_register_uart(idx,port) do { } while (0)
-#endif
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
deleted file mode 100644
index ea297ac70bc6..000000000000
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/include/asm/mach/udc_pxa2xx.h
- *
- * This supports machine-specific differences in how the PXA2xx
- * USB Device Controller (UDC) is wired.
- *
- * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
- * linux/arch/mach-ixp4xx/<machine>.c and used in
- * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
- */
-
-struct pxa2xx_udc_mach_info {
-        int  (*udc_is_connected)(void);		/* do we see host? */
-        void (*udc_command)(int cmd);
-#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
-#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
-
-	/* Boards following the design guidelines in the developer's manual,
-	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
-	 * VBUS IRQ and omit the methods above.  Store the GPIO number
-	 * here.  Note that sometimes the signals go through inverters...
-	 */
-	bool	gpio_pullup_inverted;
-	int	gpio_pullup;			/* high == pullup activated */
-};
-