diff options
Diffstat (limited to 'arch/arm/boot')
38 files changed, 3872 insertions, 55 deletions
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index a1edfd5a129a..176062ac7f07 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -78,7 +78,16 @@ endif $(obj)/uImage: STARTADDR=$(LOADADDR) +check_for_multiple_loadaddr = \ +if [ $(words $(LOADADDR)) -gt 1 ]; then \ + echo 'multiple load addresses: $(LOADADDR)'; \ + echo 'This is incompatible with uImages'; \ + echo 'Specify LOADADDR on the commandline to build an uImage'; \ + false; \ +fi + $(obj)/uImage: $(obj)/zImage FORCE + @$(check_for_multiple_loadaddr) $(call if_changed,uimage) @echo ' Image $@ is ready' diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index c6028967d336..e0936a148516 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -5,3 +5,12 @@ piggy.lzo piggy.lzma vmlinux vmlinux.lds + +# borrowed libfdt files +fdt.c +fdt.h +fdt_ro.c +fdt_rw.c +fdt_wip.c +libfdt.h +libfdt_internal.h diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 0c74a6fab952..21f56ff32797 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -26,6 +26,10 @@ HEAD = head.o OBJS += misc.o decompress.o FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c +# string library code (-Os is enforced to keep it much smaller) +OBJS += string.o +CFLAGS_string.o := -Os + # # Architecture dependencies # @@ -89,21 +93,41 @@ suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo suffix_$(CONFIG_KERNEL_LZMA) = lzma +# Borrowed libfdt files for the ATAG compatibility mode + +libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c +libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h + +libfdt_objs := $(addsuffix .o, $(basename $(libfdt))) + +$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,shipped) + +$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \ + $(addprefix $(obj)/,$(libfdt_hdrs)) + +ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) +OBJS += $(libfdt_objs) atags_to_fdt.o +endif + targets := vmlinux vmlinux.lds \ piggy.$(suffix_y) piggy.$(suffix_y).o \ - font.o font.c head.o misc.o $(OBJS) + lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS) # Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S +extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs) ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif -ccflags-y := -fpic -fno-builtin +ccflags-y := -fpic -fno-builtin -I$(obj) asflags-y := -Wa,-march=all +# Supply kernel BSS size to the decompressor via a linker symbol. +KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}') +LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR) @@ -123,7 +147,7 @@ LDFLAGS_vmlinux += -T # For __aeabi_uidivmod lib1funcs = $(obj)/lib1funcs.o -$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE +$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S $(call cmd,shipped) # We need to prevent any GOTOFF relocs being used with references @@ -139,8 +163,16 @@ bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \ ( echo "following symbols must have non local/private scope:" >&2; \ echo "$$bad_syms" >&2; rm -f $@; false ) +check_for_multiple_zreladdr = \ +if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \ + echo 'multiple zreladdrs: $(ZRELADDR)'; \ + echo 'This needs CONFIG_AUTO_ZRELADDR to be set'; \ + false; \ +fi + $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE + @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c new file mode 100644 index 000000000000..6ce11c481178 --- /dev/null +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -0,0 +1,97 @@ +#include <asm/setup.h> +#include <libfdt.h> + +static int node_offset(void *fdt, const char *node_path) +{ + int offset = fdt_path_offset(fdt, node_path); + if (offset == -FDT_ERR_NOTFOUND) + offset = fdt_add_subnode(fdt, 0, node_path); + return offset; +} + +static int setprop(void *fdt, const char *node_path, const char *property, + uint32_t *val_array, int size) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop(fdt, offset, property, val_array, size); +} + +static int setprop_string(void *fdt, const char *node_path, + const char *property, const char *string) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop_string(fdt, offset, property, string); +} + +static int setprop_cell(void *fdt, const char *node_path, + const char *property, uint32_t val) +{ + int offset = node_offset(fdt, node_path); + if (offset < 0) + return offset; + return fdt_setprop_cell(fdt, offset, property, val); +} + +/* + * Convert and fold provided ATAGs into the provided FDT. + * + * REturn values: + * = 0 -> pretend success + * = 1 -> bad ATAG (may retry with another possible ATAG pointer) + * < 0 -> error from libfdt + */ +int atags_to_fdt(void *atag_list, void *fdt, int total_space) +{ + struct tag *atag = atag_list; + uint32_t mem_reg_property[2 * NR_BANKS]; + int memcount = 0; + int ret; + + /* make sure we've got an aligned pointer */ + if ((u32)atag_list & 0x3) + return 1; + + /* if we get a DTB here we're done already */ + if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC)) + return 0; + + /* validate the ATAG */ + if (atag->hdr.tag != ATAG_CORE || + (atag->hdr.size != tag_size(tag_core) && + atag->hdr.size != 2)) + return 1; + + /* let's give it all the room it could need */ + ret = fdt_open_into(fdt, fdt, total_space); + if (ret < 0) + return ret; + + for_each_tag(atag, atag_list) { + if (atag->hdr.tag == ATAG_CMDLINE) { + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); + } else if (atag->hdr.tag == ATAG_MEM) { + if (memcount >= sizeof(mem_reg_property)/4) + continue; + mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start); + mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size); + } else if (atag->hdr.tag == ATAG_INITRD2) { + uint32_t initrd_start, initrd_size; + initrd_start = atag->u.initrd.start; + initrd_size = atag->u.initrd.size; + setprop_cell(fdt, "/chosen", "linux,initrd-start", + initrd_start); + setprop_cell(fdt, "/chosen", "linux,initrd-end", + initrd_start + initrd_size); + } + } + + if (memcount) + setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount); + + return fdt_pack(fdt); +} diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index e95a5989602a..c2effc917254 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -216,6 +216,104 @@ restart: adr r0, LC0 mov r10, r6 #endif + mov r5, #0 @ init dtb size to 0 +#ifdef CONFIG_ARM_APPENDED_DTB +/* + * r0 = delta + * r2 = BSS start + * r3 = BSS end + * r4 = final kernel address + * r5 = appended dtb size (still unknown) + * r6 = _edata + * r7 = architecture ID + * r8 = atags/device tree pointer + * r9 = size of decompressed image + * r10 = end of this image, including bss/stack/malloc space if non XIP + * r11 = GOT start + * r12 = GOT end + * sp = stack pointer + * + * if there are device trees (dtb) appended to zImage, advance r10 so that the + * dtb data will get relocated along with the kernel if necessary. + */ + + ldr lr, [r6, #0] +#ifndef __ARMEB__ + ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian +#else + ldr r1, =0xd00dfeed +#endif + cmp lr, r1 + bne dtb_check_done @ not found + +#ifdef CONFIG_ARM_ATAG_DTB_COMPAT + /* + * OK... Let's do some funky business here. + * If we do have a DTB appended to zImage, and we do have + * an ATAG list around, we want the later to be translated + * and folded into the former here. To be on the safe side, + * let's temporarily move the stack away into the malloc + * area. No GOT fixup has occurred yet, but none of the + * code we're about to call uses any global variable. + */ + add sp, sp, #0x10000 + stmfd sp!, {r0-r3, ip, lr} + mov r0, r8 + mov r1, r6 + sub r2, sp, r6 + bl atags_to_fdt + + /* + * If returned value is 1, there is no ATAG at the location + * pointed by r8. Try the typical 0x100 offset from start + * of RAM and hope for the best. + */ + cmp r0, #1 + sub r0, r4, #TEXT_OFFSET + add r0, r0, #0x100 + mov r1, r6 + sub r2, sp, r6 + blne atags_to_fdt + + ldmfd sp!, {r0-r3, ip, lr} + sub sp, sp, #0x10000 +#endif + + mov r8, r6 @ use the appended device tree + + /* + * Make sure that the DTB doesn't end up in the final + * kernel's .bss area. To do so, we adjust the decompressed + * kernel size to compensate if that .bss size is larger + * than the relocated code. + */ + ldr r5, =_kernel_bss_size + adr r1, wont_overwrite + sub r1, r6, r1 + subs r1, r5, r1 + addhi r9, r9, r1 + + /* Get the dtb's size */ + ldr r5, [r6, #4] +#ifndef __ARMEB__ + /* convert r5 (dtb size) to little endian */ + eor r1, r5, r5, ror #16 + bic r1, r1, #0x00ff0000 + mov r5, r5, ror #8 + eor r5, r5, r1, lsr #8 +#endif + + /* preserve 64-bit alignment */ + add r5, r5, #7 + bic r5, r5, #7 + + /* relocate some pointers past the appended dtb */ + add r6, r6, r5 + add r10, r10, r5 + add sp, sp, r5 +dtb_check_done: +#endif + /* * Check to see if we will overwrite ourselves. * r4 = final kernel address @@ -223,15 +321,14 @@ restart: adr r0, LC0 * r10 = end of this image, including bss/stack/malloc space if non XIP * We basically want: * r4 - 16k page directory >= r10 -> OK - * r4 + image length <= current position (pc) -> OK + * r4 + image length <= address of wont_overwrite -> OK */ add r10, r10, #16384 cmp r4, r10 bhs wont_overwrite add r10, r4, r9 - ARM( cmp r10, pc ) - THUMB( mov lr, pc ) - THUMB( cmp r10, lr ) + adr r9, wont_overwrite + cmp r10, r9 bls wont_overwrite /* @@ -285,14 +382,16 @@ wont_overwrite: * r2 = BSS start * r3 = BSS end * r4 = kernel execution address + * r5 = appended dtb size (0 if not present) * r7 = architecture ID * r8 = atags pointer * r11 = GOT start * r12 = GOT end * sp = stack pointer */ - teq r0, #0 + orrs r1, r0, r5 beq not_relocated + add r11, r11, r0 add r12, r12, r0 @@ -307,12 +406,21 @@ wont_overwrite: /* * Relocate all entries in the GOT table. + * Bump bss entries to _edata + dtb size */ 1: ldr r1, [r11, #0] @ relocate entries in the GOT - add r1, r1, r0 @ table. This fixes up the - str r1, [r11], #4 @ C references. + add r1, r1, r0 @ This fixes up C references + cmp r1, r2 @ if entry >= bss_start && + cmphs r3, r1 @ bss_end > entry + addhi r1, r1, r5 @ entry += dtb size + str r1, [r11], #4 @ next entry cmp r11, r12 blo 1b + + /* bump our bss pointers too */ + add r2, r2, r5 + add r3, r3, r5 + #else /* diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h new file mode 100644 index 000000000000..1f4e71876b00 --- /dev/null +++ b/arch/arm/boot/compressed/libfdt_env.h @@ -0,0 +1,15 @@ +#ifndef _ARM_LIBFDT_ENV_H +#define _ARM_LIBFDT_ENV_H + +#include <linux/types.h> +#include <linux/string.h> +#include <asm/byteorder.h> + +#define fdt16_to_cpu(x) be16_to_cpu(x) +#define cpu_to_fdt16(x) cpu_to_be16(x) +#define fdt32_to_cpu(x) be32_to_cpu(x) +#define cpu_to_fdt32(x) cpu_to_be32(x) +#define fdt64_to_cpu(x) be64_to_cpu(x) +#define cpu_to_fdt64(x) cpu_to_be64(x) + +#endif diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 832d37236c59..8e2a8fca5ed2 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -18,14 +18,9 @@ unsigned int __machine_arch_type; -#define _LINUX_STRING_H_ - #include <linux/compiler.h> /* for inline */ -#include <linux/types.h> /* for size_t */ -#include <linux/stddef.h> /* for NULL */ +#include <linux/types.h> #include <linux/linkage.h> -#include <asm/string.h> - static void putstr(const char *ptr); extern void error(char *x); @@ -101,41 +96,6 @@ static void putstr(const char *ptr) flush(); } - -void *memcpy(void *__dest, __const void *__src, size_t __n) -{ - int i = 0; - unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src; - - for (i = __n >> 3; i > 0; i--) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1 << 2) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1 << 1) { - *d++ = *s++; - *d++ = *s++; - } - - if (__n & 1) - *d++ = *s++; - - return __dest; -} - /* * gzip declarations */ diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c new file mode 100644 index 000000000000..36e53ef9200f --- /dev/null +++ b/arch/arm/boot/compressed/string.c @@ -0,0 +1,127 @@ +/* + * arch/arm/boot/compressed/string.c + * + * Small subset of simple string routines + */ + +#include <linux/string.h> + +void *memcpy(void *__dest, __const void *__src, size_t __n) +{ + int i = 0; + unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src; + + for (i = __n >> 3; i > 0; i--) { + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1 << 2) { + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1 << 1) { + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1) + *d++ = *s++; + + return __dest; +} + +void *memmove(void *__dest, __const void *__src, size_t count) +{ + unsigned char *d = __dest; + const unsigned char *s = __src; + + if (__dest == __src) + return __dest; + + if (__dest < __src) + return memcpy(__dest, __src, count); + + while (count--) + d[count] = s[count]; + return __dest; +} + +size_t strlen(const char *s) +{ + const char *sc = s; + + while (*sc != '\0') + sc++; + return sc - s; +} + +int memcmp(const void *cs, const void *ct, size_t count) +{ + const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count; + int res = 0; + + while (su1 < end) { + res = *su1++ - *su2++; + if (res) + break; + } + return res; +} + +int strcmp(const char *cs, const char *ct) +{ + unsigned char c1, c2; + int res = 0; + + do { + c1 = *cs++; + c2 = *ct++; + res = c1 - c2; + if (res) + break; + } while (c1); + return res; +} + +void *memchr(const void *s, int c, size_t count) +{ + const unsigned char *p = s; + + while (count--) + if ((unsigned char)c == *p++) + return (void *)(p - 1); + return NULL; +} + +char *strchr(const char *s, int c) +{ + while (*s != (char)c) + if (*s++ == '\0') + return NULL; + return (char *)s; +} + +#undef memset + +void *memset(void *s, int c, size_t count) +{ + char *xs = s; + while (count--) + *xs++ = c; + return s; +} + +void __memzero(void *s, size_t count) +{ + memset(s, 0, count); +} diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 4e728834a1b9..4919f2ac8b89 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -51,6 +51,10 @@ SECTIONS _got_start = .; .got : { *(.got) } _got_end = .; + + /* ensure the zImage file size is always a multiple of 64 bits */ + /* (without a dummy byte, ld just ignores the empty section) */ + .pad : { BYTE(0); . = ALIGN(8); } _edata = .; . = BSS_START; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi new file mode 100644 index 000000000000..aeef04269cf8 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -0,0 +1,119 @@ +/* + * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, + * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91SAM9G20 family SoC"; + compatible = "atmel,at91sam9g20"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + serial5 = &usart4; + serial6 = &usart5; + }; + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory@20000000 { + reg = <0x20000000 0x08000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <1>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + interrupt-parent; + reg = <0xfffff000 0x200>; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1>; + status = "disabled"; + }; + + usart0: serial@fffb0000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb0000 0x200>; + interrupts = <6>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart1: serial@fffb4000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb4000 0x200>; + interrupts = <7>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart2: serial@fffb8000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb8000 0x200>; + interrupts = <8>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart3: serial@fffd0000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffd0000 0x200>; + interrupts = <23>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart4: serial@fffd4000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffd4000 0x200>; + interrupts = <24>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart5: serial@fffd8000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffd8000 0x200>; + interrupts = <25>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi new file mode 100644 index 000000000000..db6a45202f26 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -0,0 +1,106 @@ +/* + * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC + * applies to AT91SAM9G45, AT91SAM9M10, + * AT91SAM9G46, AT91SAM9M11 SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91SAM9G45 family SoC"; + compatible = "atmel,at91sam9g45"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + }; + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory@70000000 { + reg = <0x70000000 0x10000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <1>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + interrupt-parent; + reg = <0xfffff000 0x200>; + }; + + dma: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21>; + }; + + dbgu: serial@ffffee00 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xffffee00 0x200>; + interrupts = <1>; + status = "disabled"; + }; + + usart0: serial@fff8c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff8c000 0x200>; + interrupts = <7>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart1: serial@fff90000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff90000 0x200>; + interrupts = <8>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart2: serial@fff94000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff94000 0x200>; + interrupts = <9>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart3: serial@fff98000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff98000 0x200>; + interrupts = <10>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts new file mode 100644 index 000000000000..85b34f59cd82 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -0,0 +1,35 @@ +/* + * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g45.dtsi" + +/ { + model = "Atmel AT91SAM9M10G45-EK"; + compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2"; + }; + + memory@70000000 { + reg = <0x70000000 0x4000000>; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + usart1: serial@fff90000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts new file mode 100644 index 000000000000..aeb1a7578fad --- /dev/null +++ b/arch/arm/boot/dts/highbank.dts @@ -0,0 +1,198 @@ +/* + * Copyright 2011 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; + +/* First 4KB has pen for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; + +/ { + model = "Calxeda Highbank"; + compatible = "calxeda,highbank"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x00000000 0xff900000>; + }; + + chosen { + bootargs = "console=ttyAMA0"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + timer@fff10600 { + compatible = "arm,smp-twd"; + reg = <0xfff10600 0x20>; + interrupts = <1 13 0xf04>; + }; + + watchdog@fff10620 { + compatible = "arm,cortex-a9-wdt"; + reg = <0xfff10620 0x20>; + interrupts = <1 14 0xf04>; + }; + + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + #address-cells = <1>; + interrupt-controller; + interrupt-parent; + reg = <0xfff11000 0x1000>, + <0xfff10100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + interrupts = <0 70 4>; + cache-unified; + cache-level = <2>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + }; + + sata@ffe08000 { + compatible = "calxeda,hb-ahci"; + reg = <0xffe08000 0x10000>; + interrupts = <0 83 4>; + }; + + sdhci@ffe0e000 { + compatible = "calxeda,hb-sdhci"; + reg = <0xffe0e000 0x1000>; + interrupts = <0 90 4>; + }; + + ipc@fff20000 { + compatible = "arm,pl320", "arm,primecell"; + reg = <0xfff20000 0x1000>; + interrupts = <0 7 4>; + }; + + gpioe: gpio@fff30000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff30000 0x1000>; + interrupts = <0 14 4>; + }; + + gpiof: gpio@fff31000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff31000 0x1000>; + interrupts = <0 15 4>; + }; + + gpiog: gpio@fff32000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff32000 0x1000>; + interrupts = <0 16 4>; + }; + + gpioh: gpio@fff33000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xfff33000 0x1000>; + interrupts = <0 17 4>; + }; + + timer { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfff34000 0x1000>; + interrupts = <0 18 4>; + }; + + rtc@fff35000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0xfff35000 0x1000>; + interrupts = <0 19 4>; + }; + + serial@fff36000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xfff36000 0x1000>; + interrupts = <0 20 4>; + }; + + smic@fff3a000 { + compatible = "ipmi-smic"; + device_type = "ipmi"; + reg = <0xfff3a000 0x1000>; + interrupts = <0 24 4>; + reg-size = <4>; + reg-spacing = <4>; + }; + + sregs@fff3c000 { + compatible = "calxeda,hb-sregs"; + reg = <0xfff3c000 0x1000>; + }; + + dma@fff3d000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfff3d000 0x1000>; + interrupts = <0 92 4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts new file mode 100644 index 000000000000..f8766af11215 --- /dev/null +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -0,0 +1,135 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx51.dtsi" + +/ { + model = "Freescale i.MX51 Babbage Board"; + compatible = "fsl,imx51-babbage", "fsl,imx51"; + + chosen { + bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; + }; + + memory { + reg = <0x90000000 0x20000000>; + }; + + soc { + aips@70000000 { /* aips-1 */ + spba@70000000 { + esdhc@70004000 { /* ESDHC1 */ + fsl,cd-internal; + fsl,wp-internal; + status = "okay"; + }; + + esdhc@70008000 { /* ESDHC2 */ + cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */ + wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */ + status = "okay"; + }; + + uart2: uart@7000c000 { /* UART3 */ + fsl,uart-has-rtscts; + status = "okay"; + }; + + ecspi@70010000 { /* ECSPI1 */ + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ + <&gpio3 25 0>; /* GPIO4_25 */ + status = "okay"; + + pmic: mc13892@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13892"; + spi-max-frequency = <6000000>; + reg = <0>; + mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */ + fsl,mc13xxx-uses-regulator; + }; + + flash: at45db321d@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; + }; + }; + + wdog@73f98000 { /* WDOG1 */ + status = "okay"; + }; + + iomuxc@73fa8000 { + compatible = "fsl,imx51-iomuxc-babbage"; + reg = <0x73fa8000 0x4000>; + }; + + uart0: uart@73fbc000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + uart1: uart@73fc0000 { + status = "okay"; + }; + }; + + aips@80000000 { /* aips-2 */ + sdma@83fb0000 { + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; + }; + + i2c@83fc4000 { /* I2C2 */ + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + }; + + fec@83fec000 { + phy-mode = "mii"; + status = "okay"; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power Button"; + gpios = <&gpio1 21 0>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi new file mode 100644 index 000000000000..327ab8e3a4c8 --- /dev/null +++ b/arch/arm/boot/dts/imx51.dtsi @@ -0,0 +1,246 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + tzic: tz-interrupt-controller@e0000000 { + compatible = "fsl,imx51-tzic", "fsl,tzic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xe0000000 0x4000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fsl,imx-ckil", "fixed-clock"; + clock-frequency = <32768>; + }; + + ckih1 { + compatible = "fsl,imx-ckih1", "fixed-clock"; + clock-frequency = <22579200>; + }; + + ckih2 { + compatible = "fsl,imx-ckih2", "fixed-clock"; + clock-frequency = <0>; + }; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&tzic>; + ranges; + + aips@70000000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x70000000 0x10000000>; + ranges; + + spba@70000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x70000000 0x40000>; + ranges; + + esdhc@70004000 { /* ESDHC1 */ + compatible = "fsl,imx51-esdhc"; + reg = <0x70004000 0x4000>; + interrupts = <1>; + status = "disabled"; + }; + + esdhc@70008000 { /* ESDHC2 */ + compatible = "fsl,imx51-esdhc"; + reg = <0x70008000 0x4000>; + interrupts = <2>; + status = "disabled"; + }; + + uart2: uart@7000c000 { /* UART3 */ + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x7000c000 0x4000>; + interrupts = <33>; + status = "disabled"; + }; + + ecspi@70010000 { /* ECSPI1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-ecspi"; + reg = <0x70010000 0x4000>; + interrupts = <36>; + status = "disabled"; + }; + + esdhc@70020000 { /* ESDHC3 */ + compatible = "fsl,imx51-esdhc"; + reg = <0x70020000 0x4000>; + interrupts = <3>; + status = "disabled"; + }; + + esdhc@70024000 { /* ESDHC4 */ + compatible = "fsl,imx51-esdhc"; + reg = <0x70024000 0x4000>; + interrupts = <4>; + status = "disabled"; + }; + }; + + gpio0: gpio@73f84000 { /* GPIO1 */ + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f84000 0x4000>; + interrupts = <50 51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio1: gpio@73f88000 { /* GPIO2 */ + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f88000 0x4000>; + interrupts = <52 53>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@73f8c000 { /* GPIO3 */ + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f8c000 0x4000>; + interrupts = <54 55>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@73f90000 { /* GPIO4 */ + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f90000 0x4000>; + interrupts = <56 57>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + wdog@73f98000 { /* WDOG1 */ + compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; + reg = <0x73f98000 0x4000>; + interrupts = <58>; + status = "disabled"; + }; + + wdog@73f9c000 { /* WDOG2 */ + compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; + reg = <0x73f9c000 0x4000>; + interrupts = <59>; + status = "disabled"; + }; + + uart0: uart@73fbc000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fbc000 0x4000>; + interrupts = <31>; + status = "disabled"; + }; + + uart1: uart@73fc0000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fc0000 0x4000>; + interrupts = <32>; + status = "disabled"; + }; + }; + + aips@80000000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x10000000>; + ranges; + + ecspi@83fac000 { /* ECSPI2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-ecspi"; + reg = <0x83fac000 0x4000>; + interrupts = <37>; + status = "disabled"; + }; + + sdma@83fb0000 { + compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; + reg = <0x83fb0000 0x4000>; + interrupts = <6>; + }; + + cspi@83fc0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; + reg = <0x83fc0000 0x4000>; + interrupts = <38>; + status = "disabled"; + }; + + i2c@83fc4000 { /* I2C2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + reg = <0x83fc4000 0x4000>; + interrupts = <63>; + status = "disabled"; + }; + + i2c@83fc8000 { /* I2C1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + reg = <0x83fc8000 0x4000>; + interrupts = <62>; + status = "disabled"; + }; + + fec@83fec000 { + compatible = "fsl,imx51-fec", "fsl,imx27-fec"; + reg = <0x83fec000 0x4000>; + interrupts = <87>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts new file mode 100644 index 000000000000..2ab7f80a0a35 --- /dev/null +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -0,0 +1,113 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx53.dtsi" + +/ { + model = "Freescale i.MX53 Automotive Reference Design Board"; + compatible = "fsl,imx53-ard", "fsl,imx53"; + + chosen { + bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; + }; + + memory { + reg = <0x70000000 0x40000000>; + }; + + soc { + aips@50000000 { /* AIPS1 */ + spba@50000000 { + esdhc@50004000 { /* ESDHC1 */ + cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */ + wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */ + status = "okay"; + }; + }; + + wdog@53f98000 { /* WDOG1 */ + status = "okay"; + }; + + iomuxc@53fa8000 { + compatible = "fsl,imx53-iomuxc-ard"; + reg = <0x53fa8000 0x4000>; + }; + + uart0: uart@53fbc000 { /* UART1 */ + status = "okay"; + }; + }; + + aips@60000000 { /* AIPS2 */ + sdma@63fb0000 { + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; + }; + }; + }; + + eim-cs1@f4000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eim-bus", "simple-bus"; + reg = <0xf4000000 0x3ff0000>; + ranges; + + lan9220@f4000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0xf4000000 0x2000000>; + phy-mode = "mii"; + interrupt-parent = <&gpio1>; + interrupts = <31>; + reg-io-width = <4>; + smsc,irq-push-pull; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + home { + label = "Home"; + gpios = <&gpio4 10 0>; /* GPIO5_10 */ + linux,code = <102>; /* KEY_HOME */ + gpio-key,wakeup; + }; + + back { + label = "Back"; + gpios = <&gpio4 11 0>; /* GPIO5_11 */ + linux,code = <158>; /* KEY_BACK */ + gpio-key,wakeup; + }; + + program { + label = "Program"; + gpios = <&gpio4 12 0>; /* GPIO5_12 */ + linux,code = <362>; /* KEY_PROGRAM */ + gpio-key,wakeup; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio4 13 0>; /* GPIO5_13 */ + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio3 0 0>; /* GPIO4_0 */ + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts new file mode 100644 index 000000000000..3f3a88185ff8 --- /dev/null +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -0,0 +1,120 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx53.dtsi" + +/ { + model = "Freescale i.MX53 Evaluation Kit"; + compatible = "fsl,imx53-evk", "fsl,imx53"; + + chosen { + bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; + }; + + memory { + reg = <0x70000000 0x80000000>; + }; + + soc { + aips@50000000 { /* AIPS1 */ + spba@50000000 { + esdhc@50004000 { /* ESDHC1 */ + cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ + wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */ + status = "okay"; + }; + + ecspi@50010000 { /* ECSPI1 */ + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */ + <&gpio2 19 0>; /* GPIO3_19 */ + status = "okay"; + + flash: at45db321d@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; + }; + + esdhc@50020000 { /* ESDHC3 */ + cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */ + wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */ + status = "okay"; + }; + }; + + wdog@53f98000 { /* WDOG1 */ + status = "okay"; + }; + + iomuxc@53fa8000 { + compatible = "fsl,imx53-iomuxc-evk"; + reg = <0x53fa8000 0x4000>; + }; + + uart0: uart@53fbc000 { /* UART1 */ + status = "okay"; + }; + }; + + aips@60000000 { /* AIPS2 */ + sdma@63fb0000 { + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; + }; + + i2c@63fc4000 { /* I2C2 */ + status = "okay"; + + pmic: mc13892@08 { + compatible = "fsl,mc13892", "fsl,mc13xxx"; + reg = <0x08>; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + }; + + fec@63fec000 { + phy-mode = "rmii"; + phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + label = "Heartbeat"; + gpios = <&gpio6 7 0>; /* GPIO7_7 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts new file mode 100644 index 000000000000..ae6de6d0c3f1 --- /dev/null +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx53.dtsi" + +/ { + model = "Freescale i.MX53 Quick Start Board"; + compatible = "fsl,imx53-qsb", "fsl,imx53"; + + chosen { + bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; + }; + + memory { + reg = <0x70000000 0x40000000>; + }; + + soc { + aips@50000000 { /* AIPS1 */ + spba@50000000 { + esdhc@50004000 { /* ESDHC1 */ + cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ + status = "okay"; + }; + + esdhc@50020000 { /* ESDHC3 */ + cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */ + wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */ + status = "okay"; + }; + }; + + wdog@53f98000 { /* WDOG1 */ + status = "okay"; + }; + + iomuxc@53fa8000 { + compatible = "fsl,imx53-iomuxc-qsb"; + reg = <0x53fa8000 0x4000>; + }; + + uart0: uart@53fbc000 { /* UART1 */ + status = "okay"; + }; + }; + + aips@60000000 { /* AIPS2 */ + sdma@63fb0000 { + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; + }; + + i2c@63fc4000 { /* I2C2 */ + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + }; + + i2c@63fc8000 { /* I2C1 */ + status = "okay"; + + accelerometer: mma8450@1c { + compatible = "fsl,mma8450"; + reg = <0x1c>; + }; + + pmic: dialog@48 { + compatible = "dialog,da9053", "dialog,da9052"; + reg = <0x48>; + }; + }; + + fec@63fec000 { + phy-mode = "rmii"; + phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + status = "okay"; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power Button"; + gpios = <&gpio0 8 0>; /* GPIO1_8 */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 14 0>; /* GPIO2_14 */ + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 15 0>; /* GPIO2_15 */ + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio6 7 0>; /* GPIO7_7 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts new file mode 100644 index 000000000000..b1c062eea715 --- /dev/null +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -0,0 +1,169 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx53.dtsi" + +/ { + model = "Freescale i.MX53 Smart Mobile Reference Design Board"; + compatible = "fsl,imx53-smd", "fsl,imx53"; + + chosen { + bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; + }; + + memory { + reg = <0x70000000 0x40000000>; + }; + + soc { + aips@50000000 { /* AIPS1 */ + spba@50000000 { + esdhc@50004000 { /* ESDHC1 */ + cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ + wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */ + status = "okay"; + }; + + esdhc@50008000 { /* ESDHC2 */ + fsl,card-wired; + status = "okay"; + }; + + uart2: uart@5000c000 { /* UART3 */ + fsl,uart-has-rtscts; + status = "okay"; + }; + + ecspi@50010000 { /* ECSPI1 */ + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */ + <&gpio2 19 0>; /* GPIO3_19 */ + status = "okay"; + + zigbee: mc1323@0 { + compatible = "fsl,mc1323"; + spi-max-frequency = <8000000>; + reg = <0>; + }; + + flash: m25p32@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32", "st,m25p"; + spi-max-frequency = <20000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; + }; + + esdhc@50020000 { /* ESDHC3 */ + fsl,card-wired; + status = "okay"; + }; + }; + + wdog@53f98000 { /* WDOG1 */ + status = "okay"; + }; + + iomuxc@53fa8000 { + compatible = "fsl,imx53-iomuxc-smd"; + reg = <0x53fa8000 0x4000>; + }; + + uart0: uart@53fbc000 { /* UART1 */ + status = "okay"; + }; + + uart1: uart@53fc0000 { /* UART2 */ + status = "okay"; + }; + }; + + aips@60000000 { /* AIPS2 */ + sdma@63fb0000 { + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; + }; + + i2c@63fc4000 { /* I2C2 */ + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + + magnetometer: mag3110@0e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + }; + + touchkey: mpr121@5a { + compatible = "fsl,mpr121"; + reg = <0x5a>; + }; + }; + + i2c@63fc8000 { /* I2C1 */ + status = "okay"; + + accelerometer: mma8450@1c { + compatible = "fsl,mma8450"; + reg = <0x1c>; + }; + + camera: ov5642@3c { + compatible = "ovti,ov5642"; + reg = <0x3c>; + }; + + pmic: dialog@48 { + compatible = "dialog,da9053", "dialog,da9052"; + reg = <0x48>; + }; + }; + + fec@63fec000 { + phy-mode = "rmii"; + phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + status = "okay"; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 14 0>; /* GPIO2_14 */ + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 15 0>; /* GPIO2_15 */ + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi new file mode 100644 index 000000000000..099cd84ee372 --- /dev/null +++ b/arch/arm/boot/dts/imx53.dtsi @@ -0,0 +1,301 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; + + tzic: tz-interrupt-controller@0fffc000 { + compatible = "fsl,imx53-tzic", "fsl,tzic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x0fffc000 0x4000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fsl,imx-ckil", "fixed-clock"; + clock-frequency = <32768>; + }; + + ckih1 { + compatible = "fsl,imx-ckih1", "fixed-clock"; + clock-frequency = <22579200>; + }; + + ckih2 { + compatible = "fsl,imx-ckih2", "fixed-clock"; + clock-frequency = <0>; + }; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&tzic>; + ranges; + + aips@50000000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x10000000>; + ranges; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x40000>; + ranges; + + esdhc@50004000 { /* ESDHC1 */ + compatible = "fsl,imx53-esdhc"; + reg = <0x50004000 0x4000>; + interrupts = <1>; + status = "disabled"; + }; + + esdhc@50008000 { /* ESDHC2 */ + compatible = "fsl,imx53-esdhc"; + reg = <0x50008000 0x4000>; + interrupts = <2>; + status = "disabled"; + }; + + uart2: uart@5000c000 { /* UART3 */ + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <33>; + status = "disabled"; + }; + + ecspi@50010000 { /* ECSPI1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; + reg = <0x50010000 0x4000>; + interrupts = <36>; + status = "disabled"; + }; + + esdhc@50020000 { /* ESDHC3 */ + compatible = "fsl,imx53-esdhc"; + reg = <0x50020000 0x4000>; + interrupts = <3>; + status = "disabled"; + }; + + esdhc@50024000 { /* ESDHC4 */ + compatible = "fsl,imx53-esdhc"; + reg = <0x50024000 0x4000>; + interrupts = <4>; + status = "disabled"; + }; + }; + + gpio0: gpio@53f84000 { /* GPIO1 */ + compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + reg = <0x53f84000 0x4000>; + interrupts = <50 51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio1: gpio@53f88000 { /* GPIO2 */ + compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + reg = <0x53f88000 0x4000>; + interrupts = <52 53>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@53f8c000 { /* GPIO3 */ + compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + reg = <0x53f8c000 0x4000>; + interrupts = <54 55>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@53f90000 { /* GPIO4 */ + compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + reg = <0x53f90000 0x4000>; + interrupts = <56 57>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + wdog@53f98000 { /* WDOG1 */ + compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; + reg = <0x53f98000 0x4000>; + interrupts = <58>; + status = "disabled"; + }; + + wdog@53f9c000 { /* WDOG2 */ + compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; + reg = <0x53f9c000 0x4000>; + interrupts = <59>; + status = "disabled"; + }; + + uart0: uart@53fbc000 { /* UART1 */ + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x53fbc000 0x4000>; + interrupts = <31>; + status = "disabled"; + }; + + uart1: uart@53fc0000 { /* UART2 */ + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x53fc0000 0x4000>; + interrupts = <32>; + status = "disabled"; + }; + + gpio4: gpio@53fdc000 { /* GPIO5 */ + compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + reg = <0x53fdc000 0x4000>; + interrupts = <103 104>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@53fe0000 { /* GPIO6 */ + compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + reg = <0x53fe0000 0x4000>; + interrupts = <105 106>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@53fe4000 { /* GPIO7 */ + compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; + reg = <0x53fe4000 0x4000>; + interrupts = <107 108>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + i2c@53fec000 { /* I2C3 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + reg = <0x53fec000 0x4000>; + interrupts = <64>; + status = "disabled"; + }; + + uart3: uart@53ff0000 { /* UART4 */ + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x53ff0000 0x4000>; + interrupts = <13>; + status = "disabled"; + }; + }; + + aips@60000000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x60000000 0x10000000>; + ranges; + + uart4: uart@63f90000 { /* UART5 */ + compatible = "fsl,imx53-uart", "fsl,imx21-uart"; + reg = <0x63f90000 0x4000>; + interrupts = <86>; + status = "disabled"; + }; + + ecspi@63fac000 { /* ECSPI2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; + reg = <0x63fac000 0x4000>; + interrupts = <37>; + status = "disabled"; + }; + + sdma@63fb0000 { + compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; + reg = <0x63fb0000 0x4000>; + interrupts = <6>; + }; + + cspi@63fc0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; + reg = <0x63fc0000 0x4000>; + interrupts = <38>; + status = "disabled"; + }; + + i2c@63fc4000 { /* I2C2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + reg = <0x63fc4000 0x4000>; + interrupts = <63>; + status = "disabled"; + }; + + i2c@63fc8000 { /* I2C1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + reg = <0x63fc8000 0x4000>; + interrupts = <62>; + status = "disabled"; + }; + + fec@63fec000 { + compatible = "fsl,imx53-fec", "fsl,imx25-fec"; + reg = <0x63fec000 0x4000>; + interrupts = <87>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts new file mode 100644 index 000000000000..072974e443f2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -0,0 +1,62 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Automotive Board"; + compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; + + chosen { + bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait"; + }; + + memory { + reg = <0x10000000 0x80000000>; + }; + + soc { + aips-bus@02100000 { /* AIPS2 */ + enet@02188000 { + phy-mode = "rgmii"; + local-mac-address = [00 04 9F 01 1B 61]; + status = "okay"; + }; + + usdhc@02198000 { /* uSDHC3 */ + cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */ + wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */ + status = "okay"; + }; + + usdhc@0219c000 { /* uSDHC4 */ + fsl,card-wired; + status = "okay"; + }; + + uart3: uart@021f0000 { /* UART4 */ + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + debug-led { + label = "Heartbeat"; + gpios = <&gpio2 25 0>; /* GPIO3_25 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi new file mode 100644 index 000000000000..7dda599558cc --- /dev/null +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -0,0 +1,575 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fsl,imx-ckil", "fixed-clock"; + clock-frequency = <32768>; + }; + + ckih1 { + compatible = "fsl,imx-ckih1", "fixed-clock"; + clock-frequency = <0>; + }; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + timer@00a00600 { + compatible = "arm,smp-twd"; + reg = <0x00a00600 0x100>; + interrupts = <1 13 0xf4>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <0 92 0x04>; + cache-unified; + cache-level = <2>; + }; + + aips-bus@02000000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif@02004000 { + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + }; + + ecspi@02008000 { /* eCSPI1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <0 31 0x04>; + status = "disabled"; + }; + + ecspi@0200c000 { /* eCSPI2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <0 32 0x04>; + status = "disabled"; + }; + + ecspi@02010000 { /* eCSPI3 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <0 33 0x04>; + status = "disabled"; + }; + + ecspi@02014000 { /* eCSPI4 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <0 34 0x04>; + status = "disabled"; + }; + + ecspi@02018000 { /* eCSPI5 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02018000 0x4000>; + interrupts = <0 35 0x04>; + status = "disabled"; + }; + + uart0: uart@02020000 { /* UART1 */ + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 0x04>; + status = "disabled"; + }; + + esai@02024000 { + reg = <0x02024000 0x4000>; + interrupts = <0 51 0x04>; + }; + + ssi@02028000 { /* SSI1 */ + reg = <0x02028000 0x4000>; + interrupts = <0 46 0x04>; + }; + + ssi@0202c000 { /* SSI2 */ + reg = <0x0202c000 0x4000>; + interrupts = <0 47 0x04>; + }; + + ssi@02030000 { /* SSI3 */ + reg = <0x02030000 0x4000>; + interrupts = <0 48 0x04>; + }; + + asrc@02034000 { + reg = <0x02034000 0x4000>; + interrupts = <0 50 0x04>; + }; + + spba@0203c000 { + reg = <0x0203c000 0x4000>; + }; + }; + + vpu@02040000 { + reg = <0x02040000 0x3c000>; + interrupts = <0 3 0x04 0 12 0x04>; + }; + + aipstz@0207c000 { /* AIPSTZ1 */ + reg = <0x0207c000 0x4000>; + }; + + pwm@02080000 { /* PWM1 */ + reg = <0x02080000 0x4000>; + interrupts = <0 83 0x04>; + }; + + pwm@02084000 { /* PWM2 */ + reg = <0x02084000 0x4000>; + interrupts = <0 84 0x04>; + }; + + pwm@02088000 { /* PWM3 */ + reg = <0x02088000 0x4000>; + interrupts = <0 85 0x04>; + }; + + pwm@0208c000 { /* PWM4 */ + reg = <0x0208c000 0x4000>; + interrupts = <0 86 0x04>; + }; + + flexcan@02090000 { /* CAN1 */ + reg = <0x02090000 0x4000>; + interrupts = <0 110 0x04>; + }; + + flexcan@02094000 { /* CAN2 */ + reg = <0x02094000 0x4000>; + interrupts = <0 111 0x04>; + }; + + gpt@02098000 { + compatible = "fsl,imx6q-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <0 55 0x04>; + }; + + gpio0: gpio@0209c000 { /* GPIO1 */ + compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <0 66 0x04 0 67 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio1: gpio@020a0000 { /* GPIO2 */ + compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <0 68 0x04 0 69 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@020a4000 { /* GPIO3 */ + compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <0 70 0x04 0 71 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@020a8000 { /* GPIO4 */ + compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <0 72 0x04 0 73 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@020ac000 { /* GPIO5 */ + compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <0 74 0x04 0 75 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@020b0000 { /* GPIO6 */ + compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <0 76 0x04 0 77 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@020b4000 { /* GPIO7 */ + compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; + reg = <0x020b4000 0x4000>; + interrupts = <0 78 0x04 0 79 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + kpp@020b8000 { + reg = <0x020b8000 0x4000>; + interrupts = <0 82 0x04>; + }; + + wdog@020bc000 { /* WDOG1 */ + compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <0 80 0x04>; + status = "disabled"; + }; + + wdog@020c0000 { /* WDOG2 */ + compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <0 81 0x04>; + status = "disabled"; + }; + + ccm@020c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 0x04 0 88 0x04>; + }; + + anatop@020c8000 { + compatible = "fsl,imx6q-anatop"; + reg = <0x020c8000 0x1000>; + interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; + }; + + usbphy@020c9000 { /* USBPHY1 */ + reg = <0x020c9000 0x1000>; + interrupts = <0 44 0x04>; + }; + + usbphy@020ca000 { /* USBPHY2 */ + reg = <0x020ca000 0x1000>; + interrupts = <0 45 0x04>; + }; + + snvs@020cc000 { + reg = <0x020cc000 0x4000>; + interrupts = <0 19 0x04 0 20 0x04>; + }; + + epit@020d0000 { /* EPIT1 */ + reg = <0x020d0000 0x4000>; + interrupts = <0 56 0x04>; + }; + + epit@020d4000 { /* EPIT2 */ + reg = <0x020d4000 0x4000>; + interrupts = <0 57 0x04>; + }; + + src@020d8000 { + compatible = "fsl,imx6q-src"; + reg = <0x020d8000 0x4000>; + interrupts = <0 91 0x04 0 96 0x04>; + }; + + gpc@020dc000 { + compatible = "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 0x04 0 90 0x04>; + }; + + iomuxc@020e0000 { + reg = <0x020e0000 0x4000>; + }; + + dcic@020e4000 { /* DCIC1 */ + reg = <0x020e4000 0x4000>; + interrupts = <0 124 0x04>; + }; + + dcic@020e8000 { /* DCIC2 */ + reg = <0x020e8000 0x4000>; + interrupts = <0 125 0x04>; + }; + + sdma@020ec000 { + compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <0 2 0x04>; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + caam@02100000 { + reg = <0x02100000 0x40000>; + interrupts = <0 105 0x04 0 106 0x04>; + }; + + aipstz@0217c000 { /* AIPSTZ2 */ + reg = <0x0217c000 0x4000>; + }; + + enet@02188000 { + compatible = "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = <0 118 0x04 0 119 0x04>; + status = "disabled"; + }; + + mlb@0218c000 { + reg = <0x0218c000 0x4000>; + interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; + }; + + usdhc@02190000 { /* uSDHC1 */ + compatible = "fsl,imx6q-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <0 22 0x04>; + status = "disabled"; + }; + + usdhc@02194000 { /* uSDHC2 */ + compatible = "fsl,imx6q-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <0 23 0x04>; + status = "disabled"; + }; + + usdhc@02198000 { /* uSDHC3 */ + compatible = "fsl,imx6q-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <0 24 0x04>; + status = "disabled"; + }; + + usdhc@0219c000 { /* uSDHC4 */ + compatible = "fsl,imx6q-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = <0 25 0x04>; + status = "disabled"; + }; + + i2c@021a0000 { /* I2C1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <0 36 0x04>; + status = "disabled"; + }; + + i2c@021a4000 { /* I2C2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <0 37 0x04>; + status = "disabled"; + }; + + i2c@021a8000 { /* I2C3 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <0 38 0x04>; + status = "disabled"; + }; + + romcp@021ac000 { + reg = <0x021ac000 0x4000>; + }; + + mmdc@021b0000 { /* MMDC0 */ + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + mmdc@021b4000 { /* MMDC1 */ + reg = <0x021b4000 0x4000>; + }; + + weim@021b8000 { + reg = <0x021b8000 0x4000>; + interrupts = <0 14 0x04>; + }; + + ocotp@021bc000 { + reg = <0x021bc000 0x4000>; + }; + + ocotp@021c0000 { + reg = <0x021c0000 0x4000>; + interrupts = <0 21 0x04>; + }; + + tzasc@021d0000 { /* TZASC1 */ + reg = <0x021d0000 0x4000>; + interrupts = <0 108 0x04>; + }; + + tzasc@021d4000 { /* TZASC2 */ + reg = <0x021d4000 0x4000>; + interrupts = <0 109 0x04>; + }; + + audmux@021d8000 { + reg = <0x021d8000 0x4000>; + }; + + mipi@021dc000 { /* MIPI-CSI */ + reg = <0x021dc000 0x4000>; + }; + + mipi@021e0000 { /* MIPI-DSI */ + reg = <0x021e0000 0x4000>; + }; + + vdoa@021e4000 { + reg = <0x021e4000 0x4000>; + interrupts = <0 18 0x04>; + }; + + uart1: uart@021e8000 { /* UART2 */ + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = <0 27 0x04>; + status = "disabled"; + }; + + uart2: uart@021ec000 { /* UART3 */ + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = <0 28 0x04>; + status = "disabled"; + }; + + uart3: uart@021f0000 { /* UART4 */ + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = <0 29 0x04>; + status = "disabled"; + }; + + uart4: uart@021f4000 { /* UART5 */ + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = <0 30 0x04>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts new file mode 100644 index 000000000000..15ded0deaa79 --- /dev/null +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -0,0 +1,24 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "Qualcomm MSM8660 SURF"; + compatible = "qcom,msm8660-surf", "qcom,msm8660"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@02080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; + + serial@19c400000 { + compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <195>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts new file mode 100644 index 000000000000..9486be62bcdd --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + /* + * Since the initial device tree board file does not create any + * devices (MMC, network...), the only way to boot is to provide a + * ramdisk. + */ + chosen { + bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi new file mode 100644 index 000000000000..d202bb5ec7ef --- /dev/null +++ b/arch/arm/boot/dts/omap3.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap3430", "ti,omap3"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + + iva { + compatible = "ti,iva2.2"; + ti,hwmods = "iva"; + + dsp { + compatible = "ti,omap3-c64"; + }; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP3 interconnect. + * The real OMAP interconnect network is quite complex. + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@1 { + compatible = "ti,omap3-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts new file mode 100644 index 000000000000..c7026578ce7d --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; + + /* + * Since the initial device tree board file does not create any + * devices (MMC, network...), the only way to boot is to provide a + * ramdisk. + */ + chosen { + bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts new file mode 100644 index 000000000000..066e28c90328 --- /dev/null +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "TI OMAP4 SDP board"; + compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; + + /* + * Since the initial device tree board file does not create any + * devices (MMC, network...), the only way to boot is to provide a + * ramdisk. + */ + chosen { + bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi new file mode 100644 index 000000000000..4c61c829043a --- /dev/null +++ b/arch/arm/boot/dts/omap4.dtsi @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Carveout for multimedia usecases + * It should be the last 48MB of the first 512MB memory part + * In theory, it should not even exist. That zone should be reserved + * dynamically during the .reserve callback. + */ +/memreserve/ 0x9d000000 0x03000000; + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap4430", "ti,omap4"; + interrupt-parent = <&gic>; + + aliases { + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + }; + cpu@1 { + compatible = "arm,cortex-a9"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap4-mpu"; + ti,hwmods = "mpu"; + }; + + dsp { + compatible = "ti,omap3-c64"; + ti,hwmods = "dsp"; + }; + + iva { + compatible = "ti,ivahd"; + ti,hwmods = "iva"; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP4 interconnect. + * The real OMAP interconnect network is quite complex. + * + * MPU -+-- MPU_PRIVATE - GIC, L2 + * | + * +----------------+----------+ + * | | | + * + +- EMIF - DDR | + * | | | + * | + +--------+ + * | | | + * | +- L4_ABE - AESS, MCBSP, TIMERs... + * | | + * +- L3_MAIN --+- L4_CORE - IPs... + * | + * +- L4_PER - IPs... + * | + * +- L4_CFG -+- L4_WKUP - IPs... + * | | + * | +- IPs... + * +- IPU ----+ + * | | + * +- DSP ----+ + * | | + * +- DSS ----+ + * + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi new file mode 100644 index 000000000000..f0a8c2068ea7 --- /dev/null +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -0,0 +1,249 @@ +/* + * Copyright (C) 2011 Picochip, Jamie Iles + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/include/ "skeleton.dtsi" +/ { + model = "Picochip picoXcell PC3X2"; + compatible = "picochip,pc3x2"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,1176jz-s"; + clock-frequency = <400000000>; + reg = <0>; + d-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-line-size = <32>; + i-cache-size = <32768>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pclk: clock@0 { + compatible = "fixed-clock"; + clock-outputs = "bus", "pclk"; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + }; + + paxi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000000 0x400000>; + + emac: gem@30000 { + compatible = "cadence,gem"; + reg = <0x30000 0x10000>; + interrupts = <31>; + }; + + dmac1: dmac@40000 { + compatible = "snps,dw-dmac"; + reg = <0x40000 0x10000>; + interrupts = <25>; + }; + + dmac2: dmac@50000 { + compatible = "snps,dw-dmac"; + reg = <0x50000 0x10000>; + interrupts = <26>; + }; + + vic0: interrupt-controller@60000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0x60000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@64000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0x64000 0x1000>; + #interrupt-cells = <1>; + }; + + fuse: picoxcell-fuse@80000 { + compatible = "picoxcell,fuse-pc3x2"; + reg = <0x80000 0x10000>; + }; + + ssi: picoxcell-spi@90000 { + compatible = "picoxcell,spi"; + reg = <0x90000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <10>; + }; + + ipsec: spacc@100000 { + compatible = "picochip,spacc-ipsec"; + reg = <0x100000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <24>; + ref-clock = <&pclk>, "ref"; + }; + + srtp: spacc@140000 { + compatible = "picochip,spacc-srtp"; + reg = <0x140000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <23>; + }; + + l2_engine: spacc@180000 { + compatible = "picochip,spacc-l2"; + reg = <0x180000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <22>; + ref-clock = <&pclk>, "ref"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x200000 0x80000>; + + rtc0: rtc@00000 { + compatible = "picochip,pc3x2-rtc"; + clock-freq = <200000000>; + reg = <0x00000 0xf>; + interrupt-parent = <&vic1>; + interrupts = <8>; + }; + + timer0: timer@10000 { + compatible = "picochip,pc3x2-timer"; + interrupt-parent = <&vic0>; + interrupts = <4>; + clock-freq = <200000000>; + reg = <0x10000 0x14>; + }; + + timer1: timer@10014 { + compatible = "picochip,pc3x2-timer"; + interrupt-parent = <&vic0>; + interrupts = <5>; + clock-freq = <200000000>; + reg = <0x10014 0x14>; + }; + + timer2: timer@10028 { + compatible = "picochip,pc3x2-timer"; + interrupt-parent = <&vic0>; + interrupts = <6>; + clock-freq = <200000000>; + reg = <0x10028 0x14>; + }; + + timer3: timer@1003c { + compatible = "picochip,pc3x2-timer"; + interrupt-parent = <&vic0>; + interrupts = <7>; + clock-freq = <200000000>; + reg = <0x1003c 0x14>; + }; + + gpio: gpio@20000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x20000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + reg-io-width = <4>; + + banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-bank"; + gpio-controller; + #gpio-cells = <2>; + gpio-generic,nr-gpio = <8>; + + regoffset-dat = <0x50>; + regoffset-set = <0x00>; + regoffset-dirout = <0x04>; + }; + + bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-bank"; + gpio-controller; + #gpio-cells = <2>; + gpio-generic,nr-gpio = <8>; + + regoffset-dat = <0x54>; + regoffset-set = <0x0c>; + regoffset-dirout = <0x10>; + }; + }; + + uart0: uart@30000 { + compatible = "snps,dw-apb-uart"; + reg = <0x30000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <10>; + clock-frequency = <3686400>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart1: uart@40000 { + compatible = "snps,dw-apb-uart"; + reg = <0x40000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <9>; + clock-frequency = <3686400>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + wdog: watchdog@50000 { + compatible = "snps,dw-apb-wdg"; + reg = <0x50000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <11>; + bus-clock = <&pclk>, "bus"; + }; + }; + }; + + rwid-axi { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + ebi@50000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x40000000 0x08000000 + 1 0 0x48000000 0x08000000 + 2 0 0x50000000 0x08000000 + 3 0 0x58000000 0x08000000>; + }; + + axi2pico@c0000000 { + compatible = "picochip,axi2pico-pc3x2"; + reg = <0xc0000000 0x10000>; + interrupts = <13 14 15 16 17 18 19 20 21>; + }; + }; +}; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi new file mode 100644 index 000000000000..daa962d191e6 --- /dev/null +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -0,0 +1,365 @@ +/* + * Copyright (C) 2011 Picochip, Jamie Iles + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/include/ "skeleton.dtsi" +/ { + model = "Picochip picoXcell PC3X3"; + compatible = "picochip,pc3x3"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,1176jz-s"; + cpu-clock = <&arm_clk>, "cpu"; + reg = <0>; + d-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-line-size = <32>; + i-cache-size = <32768>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clkgate: clkgate@800a0048 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x800a0048 4>; + compatible = "picochip,pc3x3-clk-gate"; + + tzprot_clk: clock@0 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <0>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + spi_clk: clock@1 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <1>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + dmac0_clk: clock@2 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <2>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + dmac1_clk: clock@3 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <3>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + ebi_clk: clock@4 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <4>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + ipsec_clk: clock@5 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <5>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + l2_clk: clock@6 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <6>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + trng_clk: clock@7 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <7>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + fuse_clk: clock@8 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <8>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + + otp_clk: clock@9 { + compatible = "picochip,pc3x3-gated-clk"; + clock-outputs = "bus"; + picochip,clk-disable-bit = <9>; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + }; + + arm_clk: clock@11 { + compatible = "picochip,pc3x3-pll"; + reg = <0x800a0050 0x8>; + picochip,min-freq = <140000000>; + picochip,max-freq = <700000000>; + ref-clock = <&ref_clk>, "ref"; + clock-outputs = "cpu"; + }; + + pclk: clock@12 { + compatible = "fixed-clock"; + clock-outputs = "bus", "pclk"; + clock-frequency = <200000000>; + ref-clock = <&ref_clk>, "ref"; + }; + }; + + paxi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000000 0x400000>; + + emac: gem@30000 { + compatible = "cadence,gem"; + reg = <0x30000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <31>; + }; + + dmac1: dmac@40000 { + compatible = "snps,dw-dmac"; + reg = <0x40000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <25>; + }; + + dmac2: dmac@50000 { + compatible = "snps,dw-dmac"; + reg = <0x50000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <26>; + }; + + vic0: interrupt-controller@60000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0x60000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@64000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0x64000 0x1000>; + #interrupt-cells = <1>; + }; + + fuse: picoxcell-fuse@80000 { + compatible = "picoxcell,fuse-pc3x3"; + reg = <0x80000 0x10000>; + }; + + ssi: picoxcell-spi@90000 { + compatible = "picoxcell,spi"; + reg = <0x90000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <10>; + }; + + ipsec: spacc@100000 { + compatible = "picochip,spacc-ipsec"; + reg = <0x100000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <24>; + ref-clock = <&ipsec_clk>, "ref"; + }; + + srtp: spacc@140000 { + compatible = "picochip,spacc-srtp"; + reg = <0x140000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <23>; + }; + + l2_engine: spacc@180000 { + compatible = "picochip,spacc-l2"; + reg = <0x180000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <22>; + ref-clock = <&l2_clk>, "ref"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x200000 0x80000>; + + rtc0: rtc@00000 { + compatible = "picochip,pc3x2-rtc"; + clock-freq = <200000000>; + reg = <0x00000 0xf>; + interrupt-parent = <&vic0>; + interrupts = <8>; + }; + + timer0: timer@10000 { + compatible = "picochip,pc3x2-timer"; + interrupt-parent = <&vic0>; + interrupts = <4>; + clock-freq = <200000000>; + reg = <0x10000 0x14>; + }; + + timer1: timer@10014 { + compatible = "picochip,pc3x2-timer"; + interrupt-parent = <&vic0>; + interrupts = <5>; + clock-freq = <200000000>; + reg = <0x10014 0x14>; + }; + + gpio: gpio@20000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x20000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + reg-io-width = <4>; + + banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-bank"; + gpio-controller; + #gpio-cells = <2>; + gpio-generic,nr-gpio = <8>; + + regoffset-dat = <0x50>; + regoffset-set = <0x00>; + regoffset-dirout = <0x04>; + }; + + bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-bank"; + gpio-controller; + #gpio-cells = <2>; + gpio-generic,nr-gpio = <16>; + + regoffset-dat = <0x54>; + regoffset-set = <0x0c>; + regoffset-dirout = <0x10>; + }; + + bankd: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-bank"; + gpio-controller; + #gpio-cells = <2>; + gpio-generic,nr-gpio = <30>; + + regoffset-dat = <0x5c>; + regoffset-set = <0x24>; + regoffset-dirout = <0x28>; + }; + }; + + uart0: uart@30000 { + compatible = "snps,dw-apb-uart"; + reg = <0x30000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <10>; + clock-frequency = <3686400>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart1: uart@40000 { + compatible = "snps,dw-apb-uart"; + reg = <0x40000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <9>; + clock-frequency = <3686400>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + wdog: watchdog@50000 { + compatible = "snps,dw-apb-wdg"; + reg = <0x50000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <11>; + bus-clock = <&pclk>, "bus"; + }; + + timer2: timer@60000 { + compatible = "picochip,pc3x2-timer"; + interrupt-parent = <&vic0>; + interrupts = <6>; + clock-freq = <200000000>; + reg = <0x60000 0x14>; + }; + + timer3: timer@60014 { + compatible = "picochip,pc3x2-timer"; + interrupt-parent = <&vic0>; + interrupts = <7>; + clock-freq = <200000000>; + reg = <0x60014 0x14>; + }; + }; + }; + + rwid-axi { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + ebi@50000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x40000000 0x08000000 + 1 0 0x48000000 0x08000000 + 2 0 0x50000000 0x08000000 + 3 0 0x58000000 0x08000000>; + }; + + axi2pico@c0000000 { + compatible = "picochip,axi2pico-pc3x3"; + reg = <0xc0000000 0x10000>; + interrupt-parent = <&vic0>; + interrupts = <13 14 15 16 17 18 19 20 21>; + }; + + otp@ffff8000 { + compatible = "picochip,otp-pc3x3"; + reg = <0xffff8000 0x8000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts new file mode 100644 index 000000000000..1297414dd649 --- /dev/null +++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2011 Picochip, Jamie Iles + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +/include/ "picoxcell-pc3x2.dtsi" +/ { + model = "Picochip PC7302 (PC3X2)"; + compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2"; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; + + chosen { + linux,stdout-path = &uart0; + }; + + clocks { + ref_clk: clock@1 { + compatible = "fixed-clock"; + clock-outputs = "ref"; + clock-frequency = <20000000>; + }; + }; + + rwid-axi { + ebi@50000000 { + nand: gpio-nand@2,0 { + compatible = "gpio-control-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <2 0x0000 0x1000>; + bus-clock = <&pclk>, "bus"; + gpio-control-nand,io-sync-reg = + <0x00000000 0x80220000>; + + gpios = <&banka 1 0 /* rdy */ + &banka 2 0 /* nce */ + &banka 3 0 /* ale */ + &banka 4 0 /* cle */ + 0 /* nwp */>; + + boot@100000 { + label = "Boot"; + reg = <0x100000 0x80000>; + }; + + redundant-boot@200000 { + label = "Redundant Boot"; + reg = <0x200000 0x80000>; + }; + + boot-env@300000 { + label = "Boot Evironment"; + reg = <0x300000 0x20000>; + }; + + redundant-boot-env@320000 { + label = "Redundant Boot Environment"; + reg = <0x300000 0x20000>; + }; + + kernel@380000 { + label = "Kernel"; + reg = <0x380000 0x800000>; + }; + + fs@b80000 { + label = "File System"; + reg = <0xb80000 0xf480000>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts new file mode 100644 index 000000000000..9e317a4f431c --- /dev/null +++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2011 Picochip, Jamie Iles + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +/include/ "picoxcell-pc3x3.dtsi" +/ { + model = "Picochip PC7302 (PC3X3)"; + compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3"; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; + + chosen { + linux,stdout-path = &uart0; + }; + + clocks { + ref_clk: clock@10 { + compatible = "fixed-clock"; + clock-outputs = "ref"; + clock-frequency = <20000000>; + }; + + clkgate: clkgate@800a0048 { + clock@4 { + picochip,clk-no-disable; + }; + }; + }; + + rwid-axi { + ebi@50000000 { + nand: gpio-nand@2,0 { + compatible = "gpio-control-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <2 0x0000 0x1000>; + bus-clock = <&ebi_clk>, "bus"; + gpio-control-nand,io-sync-reg = + <0x00000000 0x80220000>; + + gpios = <&banka 1 0 /* rdy */ + &banka 2 0 /* nce */ + &banka 3 0 /* ale */ + &banka 4 0 /* cle */ + 0 /* nwp */>; + + boot@100000 { + label = "Boot"; + reg = <0x100000 0x80000>; + }; + + redundant-boot@200000 { + label = "Redundant Boot"; + reg = <0x200000 0x80000>; + }; + + boot-env@300000 { + label = "Boot Evironment"; + reg = <0x300000 0x20000>; + }; + + redundant-boot-env@320000 { + label = "Redundant Boot Environment"; + reg = <0x300000 0x20000>; + }; + + kernel@380000 { + label = "Kernel"; + reg = <0x380000 0x800000>; + }; + + fs@b80000 { + label = "File System"; + reg = <0xb80000 0xf480000>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts index 6fecc88065b2..34ae3a64ba25 100644 --- a/arch/arm/boot/dts/prima2-cb.dts +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -39,9 +39,12 @@ ranges = <0x40000000 0x40000000 0x80000000>; l2-cache-controller@80040000 { - compatible = "arm,pl310-cache"; + compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; + arm,filter-ranges = <0 0x40000000>; }; intc: interrupt-controller@80020000 { @@ -67,6 +70,11 @@ compatible = "sirf,prima2-rstc"; reg = <0x88010000 0x1000>; }; + + rsc-controller@88020000 { + compatible = "sirf,prima2-rsc"; + reg = <0x88020000 0x1000>; + }; }; mem-iobg { @@ -274,7 +282,7 @@ gpio: gpio-controller@b0120000 { #gpio-cells = <2>; #interrupt-cells = <2>; - compatible = "sirf,prima2-gpio"; + compatible = "sirf,prima2-gpio-pinmux"; reg = <0xb0120000 0x10000>; gpio-controller; interrupt-controller; @@ -358,7 +366,7 @@ }; rtc-iobg { - compatible = "sirf,prima2-rtciobg", "simple-bus"; + compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80030000 0x10000>; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index e5818668d091..0e225b86b652 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -66,5 +66,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + support-8bit; }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 64cedca6fc79..a72299b8e668 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -25,4 +25,8 @@ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; + + sdhci@c8000600 { + support-8bit; + }; }; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts new file mode 100644 index 000000000000..9b29a623aaf1 --- /dev/null +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -0,0 +1,32 @@ +/dts-v1/; + +/memreserve/ 0x1c000000 0x04000000; +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra2 Ventana evaluation board"; + compatible = "nvidia,ventana", "nvidia,tegra20"; + + chosen { + bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init"; + }; + + memory { + reg = < 0x00000000 0x40000000 >; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + sdhci@c8000400 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + }; + + sdhci@c8000600 { + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + support-8bit; + }; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 5727595cde61..65d7e6a333eb 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -77,6 +77,14 @@ gpio-controller; }; + pinmux: pinmux@70000000 { + compatible = "nvidia,tegra20-pinmux"; + reg = < 0x70000014 0x10 /* Tri-state registers */ + 0x70000080 0x20 /* Mux registers */ + 0x700000a0 0x14 /* Pull-up/down registers */ + 0x70000868 0xa8 >; /* Pad control registers */ + }; + serial@70006000 { compatible = "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts new file mode 100644 index 000000000000..d66e2c00ac35 --- /dev/null +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -0,0 +1,30 @@ +/* + * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g20.dtsi" + +/ { + model = "Calao USB A9G20"; + compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs"; + }; + + memory@20000000 { + reg = <0x20000000 0x4000000>; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + }; + }; +}; |