diff options
Diffstat (limited to 'arch/arm/boot/dts')
70 files changed, 1479 insertions, 276 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..6e784fac5798 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -517,15 +517,7 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb -targets += dtbs dtbs_install -targets += $(dtb-y) endif -# *.dtb used to be generated in the directory above. Clean out the -# old build results so people don't accidentally use them. -dtbs: $(addprefix $(obj)/, $(dtb-y)) - $(Q)rm -f $(obj)/../*.dtb - -clean-files := *.dtb - -dtbs_install: $(addsuffix _dtbinst_, $(dtb-y)) +always := $(dtb-y) +clean-files := *.dtb diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 6cc25ed912ee..2c6248d9a9ef 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -195,6 +195,7 @@ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; &usb1 { diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 712edce7d6fb..071b56aa0c7e 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -99,7 +99,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -107,7 +107,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 87aa4f3b8b3d..53bbfc90b26a 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -100,7 +100,7 @@ }; lcd0: display { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi"; label = "lcd"; pinctrl-names = "default"; @@ -112,11 +112,11 @@ clock-frequency = <9000000>; hactive = <480>; vactive = <272>; - hfront-porch = <8>; - hback-porch = <43>; - hsync-len = <4>; - vback-porch = <12>; - vfront-porch = <4>; + hfront-porch = <2>; + hback-porch = <2>; + hsync-len = <41>; + vfront-porch = <2>; + vback-porch = <2>; vsync-len = <10>; hsync-active = <0>; vsync-active = <0>; @@ -320,8 +320,7 @@ lcd_pins: lcd_pins { pinctrl-single,pins = < - /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; }; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index c7dc9dab93a4..cfb49686ab6a 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -107,7 +107,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -123,7 +123,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; @@ -131,7 +131,7 @@ ehrpwm3_tbclk: ehrpwm3_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; @@ -139,7 +139,7 @@ ehrpwm4_tbclk: ehrpwm4_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; @@ -147,7 +147,7 @@ ehrpwm5_tbclk: ehrpwm5_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index a495e5821ab8..d5051358fb1b 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -102,30 +102,6 @@ broken-cd; }; - pinctrl { - /* - * These pins might be muxed as I2S by - * the bootloader, but it conflicts - * with the real I2S pins that are - * muxed using i2s_pins. We must mux - * those pins to a function other than - * I2S. - */ - pinctrl-0 = <&hog_pins1 &hog_pins2>; - pinctrl-names = "default"; - - hog_pins1: hog-pins1 { - marvell,pins = "mpp6", "mpp8", "mpp10", - "mpp12", "mpp13"; - marvell,function = "gpio"; - }; - - hog_pins2: hog-pins2 { - marvell,pins = "mpp5", "mpp7", "mpp9"; - marvell,function = "gpo"; - }; - }; - usb@50000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 83286ec9702c..84366cddaa8e 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -225,7 +225,6 @@ }; eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; reg = <0x70000 0x4000>; interrupts = <8>; clocks = <&gateclk 4>; @@ -241,7 +240,6 @@ }; eth1: ethernet@74000 { - compatible = "marvell,armada-370-neta"; reg = <0x74000 0x4000>; interrupts = <10>; clocks = <&gateclk 3>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 6b3c23b1e138..b6e02689c61b 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -106,11 +106,6 @@ reg = <0x11100 0x20>; }; - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x100>; - }; - pinctrl { compatible = "marvell,mv88f6710-pinctrl"; reg = <0x18000 0x38>; @@ -205,6 +200,11 @@ interrupts = <91>; }; + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x100>; + }; + gateclk: clock-gating-control@18220 { compatible = "marvell,armada-370-gating-clock"; reg = <0x18220 0x4>; @@ -302,6 +302,14 @@ dmacap,memset; }; }; + + ethernet@70000 { + compatible = "marvell,armada-370-neta"; + }; + + ethernet@74000 { + compatible = "marvell,armada-370-neta"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index de6571445cef..34a4f07b5546 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -450,7 +450,7 @@ }; sata@a0000 { - compatible = "marvell,orion-sata"; + compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 14>, <&gateclk 20>; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 480e237a870f..677160effbb0 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -296,7 +296,7 @@ }; eth3: ethernet@34000 { - compatible = "marvell,armada-370-neta"; + compatible = "marvell,armada-xp-neta"; reg = <0x34000 0x4000>; interrupts = <14>; clocks = <&gateclk 1>; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 2c7b1fef4703..e143776b78ec 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -334,7 +334,7 @@ }; eth3: ethernet@34000 { - compatible = "marvell,armada-370-neta"; + compatible = "marvell,armada-xp-neta"; reg = <0x34000 0x4000>; interrupts = <14>; clocks = <&gateclk 1>; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 4e5a59ee1501..db06fa397f79 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -71,6 +71,10 @@ }; internal-regs { + rtc@10300 { + /* No crystal connected to the internal RTC */ + status = "disabled"; + }; serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bff9f6c18db1..66d25b788067 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -125,7 +125,7 @@ }; eth2: ethernet@30000 { - compatible = "marvell,armada-370-neta"; + compatible = "marvell,armada-xp-neta"; reg = <0x30000 0x4000>; interrupts = <12>; clocks = <&gateclk 2>; @@ -168,6 +168,14 @@ }; }; + ethernet@70000 { + compatible = "marvell,armada-xp-neta"; + }; + + ethernet@74000 { + compatible = "marvell,armada-xp-neta"; + }; + xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index b5b84006469e..d7f6ae4e5b98 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -108,8 +108,8 @@ mmc0: mmc@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; - slot@1 { - reg = <1>; + slot@0 { + reg = <0>; bus-width = <4>; cd-gpios = <&pioE 5 0>; }; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index f3bb2dd6269e..c97844cac4e7 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -66,8 +66,9 @@ reg = <0x1d000 0x1000>; cache-unified; cache-level = <2>; - cache-sets = <16>; - cache-size = <0x80000>; + cache-size = <524288>; + cache-sets = <1024>; + cache-line-size = <32>; interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index ea1f99b8eed6..45ac1d04cf42 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -30,6 +30,8 @@ }; &sdhci2 { + broken-cd; + bus-width = <8>; non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 891d56b03922..b805e19ed390 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -83,7 +83,8 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_SDIO1XIN>; + clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clock-names = "io", "core"; status = "disabled"; }; @@ -314,36 +315,6 @@ interrupt-parent = <&gic>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; }; - - gpio4: gpio@5000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x5000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porte: gpio-port@4 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; - - gpio5: gpio@c000 { - compatible = "snps,dw-apb-gpio"; - reg = <0xc000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portf: gpio-port@5 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; }; chip: chip-control@ea0000 { @@ -372,6 +343,21 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + i2c2: i2c@7000 { compatible = "snps,designware-i2c"; #address-cells = <1>; @@ -422,6 +408,21 @@ status = "disabled"; }; + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + sysctrl: pin-controller@d000 { compatible = "marvell,berlin2q-system-ctrl"; reg = <0xd000 0x100>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index a5441d5482a6..3cc8b8320345 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -154,7 +154,7 @@ uart2: serial@12200 { compatible = "ns16550a"; - reg = <0x12000 0x100>; + reg = <0x12200 0x100>; reg-shift = <2>; interrupts = <9>; clocks = <&core_clk 0>; @@ -163,7 +163,7 @@ uart3: serial@12300 { compatible = "ns16550a"; - reg = <0x12100 0x100>; + reg = <0x12300 0x100>; reg-shift = <2>; interrupts = <10>; clocks = <&core_clk 0>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index c6ce6258434f..1bd6c79f445e 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -399,23 +399,23 @@ }; partition@5 { label = "QSPI.u-boot-spl-os"; - reg = <0x00140000 0x00010000>; + reg = <0x00140000 0x00080000>; }; partition@6 { label = "QSPI.u-boot-env"; - reg = <0x00150000 0x00010000>; + reg = <0x001c0000 0x00010000>; }; partition@7 { label = "QSPI.u-boot-env.backup1"; - reg = <0x00160000 0x0010000>; + reg = <0x001d0000 0x0010000>; }; partition@8 { label = "QSPI.kernel"; - reg = <0x00170000 0x0800000>; + reg = <0x001e0000 0x0800000>; }; partition@9 { label = "QSPI.file-system"; - reg = <0x00970000 0x01690000>; + reg = <0x009e0000 0x01620000>; }; }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 9cc98436a982..8ba02cb2955f 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -34,6 +34,8 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; }; timer { @@ -653,7 +655,7 @@ }; wdt2: wdt@4ae14000 { - compatible = "ti,omap4-wdt"; + compatible = "ti,omap3-wdt"; reg = <0x4ae14000 0x80>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "wd_timer2"; @@ -1265,6 +1267,75 @@ ti,irqs-skip = <10 133 139 140>; ti,irqs-safe-map = <0>; }; + + mac: ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "gmac"; + clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x48484000 0x1000 + 0x48485200 0x2E00>; + #address-cells = <1>; + #size-cells = <1>; + + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; + + /* + * rx_thresh_pend + * rx_pend + * tx_pend + * misc_pend + */ + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + ranges; + status = "disabled"; + + davinci_mdio: mdio@48485000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x48485000 0x100>; + }; + + cpsw_emac0: slave@48480200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@48480300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + phy_sel: cpsw-phy-sel@4a002554 { + compatible = "ti,dra7xx-cpsw-phy-sel"; + reg= <0x4a002554 0x4>; + reg-names = "gmii-sel"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 2c05b3f017fa..64c0f75b5444 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -243,10 +243,18 @@ ti,invert-autoidle-bit; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -309,10 +317,18 @@ clock-div = <1>; }; + dpll_dsp_byp_mux: dpll_dsp_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0240>; + }; + dpll_dsp_ck: dpll_dsp_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; }; @@ -335,10 +351,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -361,10 +385,18 @@ clock-div = <1>; }; + dpll_gpu_byp_mux: dpll_gpu_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02e4>; + }; + dpll_gpu_ck: dpll_gpu_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; }; @@ -398,10 +430,18 @@ clock-div = <1>; }; + dpll_ddr_byp_mux: dpll_ddr_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x021c>; + }; + dpll_ddr_ck: dpll_ddr_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; @@ -416,10 +456,18 @@ ti,invert-autoidle-bit; }; + dpll_gmac_byp_mux: dpll_gmac_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02b4>; + }; + dpll_gmac_ck: dpll_gmac_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; @@ -482,10 +530,18 @@ clock-div = <1>; }; + dpll_eve_byp_mux: dpll_eve_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0290>; + }; + dpll_eve_ck: dpll_eve_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; @@ -1249,10 +1305,18 @@ clock-div = <1>; }; + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -1275,10 +1339,18 @@ clock-div = <1>; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e0278ecbc816..98960b7bc518 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -368,7 +368,7 @@ }; i2s1: i2s@13960000 { - compatible = "samsung,s5pv210-i2s"; + compatible = "samsung,s3c6410-i2s"; reg = <0x13960000 0x100>; clocks = <&clock CLK_I2S1>; clock-names = "iis"; @@ -378,7 +378,7 @@ }; i2s2: i2s@13970000 { - compatible = "samsung,s5pv210-i2s"; + compatible = "samsung,s3c6410-i2s"; reg = <0x13970000 0x100>; clocks = <&clock CLK_I2S2>; clock-names = "iis"; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 93b6c909e991..44044f275115 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -190,6 +190,12 @@ clock-frequency = <168000000>; }; + clk_375m: clk_375m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <375000000>; + }; + soc { /* It's a 32-bit SoC. */ #address-cells = <1>; @@ -264,4 +270,714 @@ }; }; + + etb@0,e3c42000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe3c42000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + etb0_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator0_out_port0>; + }; + }; + }; + + etb@0,e3c82000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe3c82000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + etb1_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator1_out_port0>; + }; + }; + }; + + etb@0,e3cc2000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe3cc2000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + etb2_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator2_out_port0>; + }; + }; + }; + + etb@0,e3d02000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0xe3d02000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + etb3_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator3_out_port0>; + }; + }; + }; + + tpiu@0,e3c05000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xe3c05000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + port { + tpiu_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&funnel4_out_port0>; + }; + }; + }; + + replicator0 { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator0_out_port0: endpoint { + remote-endpoint = <&etb0_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator0_out_port1: endpoint { + remote-endpoint = <&funnel4_in_port0>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator0_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel0_out_port0>; + }; + }; + }; + }; + + replicator1 { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator1_out_port0: endpoint { + remote-endpoint = <&etb1_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator1_out_port1: endpoint { + remote-endpoint = <&funnel4_in_port1>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator1_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel1_out_port0>; + }; + }; + }; + }; + + replicator2 { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator2_out_port0: endpoint { + remote-endpoint = <&etb2_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator2_out_port1: endpoint { + remote-endpoint = <&funnel4_in_port2>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator2_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel2_out_port0>; + }; + }; + }; + }; + + replicator3 { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator3_out_port0: endpoint { + remote-endpoint = <&etb3_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator3_out_port1: endpoint { + remote-endpoint = <&funnel4_in_port3>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator3_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel3_out_port0>; + }; + }; + }; + }; + + funnel@0,e3c41000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3c41000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel0_out_port0: endpoint { + remote-endpoint = + <&replicator0_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel0_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel0_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel0_in_port2: endpoint { + slave-mode; + remote-endpoint = <&ptm2_out_port>; + }; + }; + + port@4 { + reg = <3>; + funnel0_in_port3: endpoint { + slave-mode; + remote-endpoint = <&ptm3_out_port>; + }; + }; + }; + }; + + funnel@0,e3c81000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3c81000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel1_out_port0: endpoint { + remote-endpoint = + <&replicator1_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel1_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm4_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel1_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm5_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel1_in_port2: endpoint { + slave-mode; + remote-endpoint = <&ptm6_out_port>; + }; + }; + + port@4 { + reg = <3>; + funnel1_in_port3: endpoint { + slave-mode; + remote-endpoint = <&ptm7_out_port>; + }; + }; + }; + }; + + funnel@0,e3cc1000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3cc1000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel2_out_port0: endpoint { + remote-endpoint = + <&replicator2_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel2_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm8_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel2_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm9_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel2_in_port2: endpoint { + slave-mode; + remote-endpoint = <&ptm10_out_port>; + }; + }; + + port@4 { + reg = <3>; + funnel2_in_port3: endpoint { + slave-mode; + remote-endpoint = <&ptm11_out_port>; + }; + }; + }; + }; + + funnel@0,e3d01000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3d01000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel3_out_port0: endpoint { + remote-endpoint = + <&replicator3_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel3_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm12_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel3_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm13_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel3_in_port2: endpoint { + slave-mode; + remote-endpoint = <&ptm14_out_port>; + }; + }; + + port@4 { + reg = <3>; + funnel3_in_port3: endpoint { + slave-mode; + remote-endpoint = <&ptm15_out_port>; + }; + }; + }; + }; + + funnel@0,e3c04000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xe3c04000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel4_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel4_in_port0: endpoint { + slave-mode; + remote-endpoint = + <&replicator0_out_port1>; + }; + }; + + port@2 { + reg = <1>; + funnel4_in_port1: endpoint { + slave-mode; + remote-endpoint = + <&replicator1_out_port1>; + }; + }; + + port@3 { + reg = <2>; + funnel4_in_port2: endpoint { + slave-mode; + remote-endpoint = + <&replicator2_out_port1>; + }; + }; + + port@4 { + reg = <3>; + funnel4_in_port3: endpoint { + slave-mode; + remote-endpoint = + <&replicator3_out_port1>; + }; + }; + }; + }; + + ptm@0,e3c7c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3c7c000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU0>; + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; + }; + }; + + ptm@0,e3c7d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3c7d000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU1>; + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel0_in_port1>; + }; + }; + }; + + ptm@0,e3c7e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3c7e000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU2>; + port { + ptm2_out_port: endpoint { + remote-endpoint = <&funnel0_in_port2>; + }; + }; + }; + + ptm@0,e3c7f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3c7f000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU3>; + port { + ptm3_out_port: endpoint { + remote-endpoint = <&funnel0_in_port3>; + }; + }; + }; + + ptm@0,e3cbc000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cbc000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU4>; + port { + ptm4_out_port: endpoint { + remote-endpoint = <&funnel1_in_port0>; + }; + }; + }; + + ptm@0,e3cbd000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cbd000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU5>; + port { + ptm5_out_port: endpoint { + remote-endpoint = <&funnel1_in_port1>; + }; + }; + }; + + ptm@0,e3cbe000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cbe000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU6>; + port { + ptm6_out_port: endpoint { + remote-endpoint = <&funnel1_in_port2>; + }; + }; + }; + + ptm@0,e3cbf000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cbf000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU7>; + port { + ptm7_out_port: endpoint { + remote-endpoint = <&funnel1_in_port3>; + }; + }; + }; + + ptm@0,e3cfc000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cfc000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU8>; + port { + ptm8_out_port: endpoint { + remote-endpoint = <&funnel2_in_port0>; + }; + }; + }; + + ptm@0,e3cfd000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cfd000 0 0x1000>; + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU9>; + port { + ptm9_out_port: endpoint { + remote-endpoint = <&funnel2_in_port1>; + }; + }; + }; + + ptm@0,e3cfe000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cfe000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU10>; + port { + ptm10_out_port: endpoint { + remote-endpoint = <&funnel2_in_port2>; + }; + }; + }; + + ptm@0,e3cff000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3cff000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU11>; + port { + ptm11_out_port: endpoint { + remote-endpoint = <&funnel2_in_port3>; + }; + }; + }; + + ptm@0,e3d3c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3d3c000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU12>; + port { + ptm12_out_port: endpoint { + remote-endpoint = <&funnel3_in_port0>; + }; + }; + }; + + ptm@0,e3d3d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3d3d000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU13>; + port { + ptm13_out_port: endpoint { + remote-endpoint = <&funnel3_in_port1>; + }; + }; + }; + + ptm@0,e3d3e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3d3e000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU14>; + port { + ptm14_out_port: endpoint { + remote-endpoint = <&funnel3_in_port2>; + }; + }; + }; + + ptm@0,e3d3f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0xe3d3f000 0 0x1000>; + + clocks = <&clk_375m>; + clock-names = "apb_pclk"; + cpu = <&CPU15>; + port { + ptm15_out_port: endpoint { + remote-endpoint = <&funnel3_in_port3>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 7e6eef2488e8..82045398bf1f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -12,6 +12,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx23.dtsi" / { @@ -93,6 +94,7 @@ ahb@80080000 { usb0: usb@80080000 { + dr_mode = "host"; vbus-supply = <®_usb0_vbus>; status = "okay"; }; @@ -122,7 +124,7 @@ user { label = "green"; - gpios = <&gpio2 1 1>; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 9c21b1583762..300507fc722f 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "imx25.dtsi" @@ -93,8 +94,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 1 0>; - wp-gpios = <&gpio2 0 0>; + cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 58d3c3cf2923..677f81d9dcd5 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -162,7 +162,7 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>, <&clks 62>; + clocks = <&clks 78>, <&clks 78>; clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; @@ -369,7 +369,7 @@ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; #pwm-cells = <2>; reg = <0x53fa0000 0x4000>; - clocks = <&clks 106>, <&clks 36>; + clocks = <&clks 106>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <36>; }; @@ -388,7 +388,7 @@ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; #pwm-cells = <2>; reg = <0x53fa8000 0x4000>; - clocks = <&clks 107>, <&clks 36>; + clocks = <&clks 107>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <41>; }; @@ -428,8 +428,9 @@ pwm4: pwm@53fc8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; reg = <0x53fc8000 0x4000>; - clocks = <&clks 108>, <&clks 36>; + clocks = <&clks 108>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <42>; }; @@ -476,7 +477,7 @@ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; #pwm-cells = <2>; reg = <0x53fe0000 0x4000>; - clocks = <&clks 105>, <&clks 36>; + clocks = <&clks 105>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <26>; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 107d713e1cbe..12ac5f7e0a2e 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -531,7 +531,7 @@ fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; - reg = <0x1002b000 0x4000>; + reg = <0x1002b000 0x1000>; interrupts = <50>; clocks = <&clks IMX27_CLK_FEC_IPG_GATE>, <&clks IMX27_CLK_FEC_AHB_GATE>; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 47f68ac868d4..5ed245a3f9ac 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -900,7 +900,7 @@ 80 81 68 69 70 71 72 73 74 75 76 77>; - interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", "saif0", "saif1", "i2c0", "i2c1", "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 6932928f3b45..667eb6a45f59 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -286,8 +286,8 @@ can1: can@53fe4000 { compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; reg = <0x53fe4000 0x1000>; - clocks = <&clks 33>; - clock-names = "ipg"; + clocks = <&clks 33>, <&clks 33>; + clock-names = "ipg", "per"; interrupts = <43>; status = "disabled"; }; @@ -295,8 +295,8 @@ can2: can@53fe8000 { compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; reg = <0x53fe8000 0x1000>; - clocks = <&clks 34>; - clock-names = "ipg"; + clocks = <&clks 34>, <&clks 34>; + clock-names = "ipg", "per"; interrupts = <44>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index c5a9a24c280a..cdd72e0eb4d4 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -90,7 +90,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 56569cecaa78..649befeb2cf9 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -127,24 +127,12 @@ #address-cells = <1>; #size-cells = <0>; - reg_usbh1_vbus: regulator@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1reg>; - reg = <0>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: regulator@1 { + reg_hub_reset: regulator@0 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotgreg>; - reg = <1>; - regulator-name = "usbotg_vbus"; + reg = <0>; + regulator-name = "hub_reset"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; @@ -176,6 +164,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_DUMMY>; clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; }; }; @@ -419,7 +408,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_hub_reset>; fsl,usbphy = <&usbh1phy>; phy_type = "ulpi"; status = "okay"; @@ -429,7 +418,6 @@ dr_mode = "otg"; disable-over-current; phy_type = "utmi_wide"; - vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index e9337ad52f59..3bc18835fb4b 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -103,8 +103,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d0e0f57eb432..53f40885c530 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -124,8 +124,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 181ae5ebf23f..1f55187ed9ce 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -147,8 +147,8 @@ &esdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc3>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; + cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; bus-width = <8>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 1d325576bcc0..fc89ce1e5763 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -41,8 +41,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio4 11 0>; + cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 4f1f0e2868bf..e03373a58760 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -41,8 +41,8 @@ pinctrl-0 = <&pinctrl_esdhc2>, <&pinctrl_esdhc2_cdwp>; vmmc-supply = <®_3p3v>; - wp-gpios = <&gpio1 2 0>; - cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 704bd72cbfec..d3e50b22064f 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -183,7 +183,7 @@ }; &esdhc1 { - cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -191,7 +191,7 @@ }; &esdhc2 { - cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index c17d3ad6dba5..fc51b87ad208 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -119,8 +119,8 @@ &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio3 25 0>; - wp-gpios = <&gpio2 19 0>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index d3c0bf5c84e3..b5756c21ea1d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -282,7 +282,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index cade1bdc97e9..86f03c1b147c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -287,7 +287,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index cf13239a1619..4a8d97f47759 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -376,12 +376,10 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 584721264121..585b4f6986c1 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -9,17 +9,103 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/sound/fsl-imx-audmux.h> + / { chosen { linux,stdout-path = &uart4; }; + + regulators { + sound_1v8: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "i2s-audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound_3v3: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "i2s-audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + + tlv320_mclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "tlv320-mclk"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "OnboardTLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&tlv320_mclk>; + }; + }; + }; -&fec { +&audmux { status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(4)) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + 0x00000000 + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; }; -&gpmi { +&can1 { + status = "okay"; +}; + +&fec { status = "okay"; }; @@ -28,14 +114,18 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <100000>; status = "okay"; - tlv320@18 { - compatible = "ti,tlv320aic3x"; + codec: tlv320@18 { + compatible = "ti,tlv320aic3007"; + #sound-dai-cells = <0>; reg = <0x18>; + ai3x-micbias-vg = <2>; + + AVDD-supply = <&sound_3v3>; + IOVDD-supply = <&sound_3v3>; + DRVDD-supply = <&sound_3v3>; + DVDD-supply = <&sound_1v8>; }; stmpe@41 { @@ -55,9 +145,14 @@ }; &i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clock-frequency = <100000>; + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&ssi2 { status = "okay"; }; @@ -84,19 +179,3 @@ &usdhc3 { status = "okay"; }; - -&iomuxc { - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 0e50bb0a6b94..1ce6133b67f5 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -31,6 +31,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 15 0>; + enable-active-high; }; reg_usb_h1_vbus: regulator@1 { @@ -40,6 +41,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 0 0>; + enable-active-high; }; }; @@ -58,6 +60,18 @@ }; }; +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; @@ -72,6 +86,22 @@ }; }; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + phy-supply = <&vdd_eth_io_reg>; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -85,8 +115,8 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&gpio4>; - interrupts = <17 0x8>; /* active-low GPIO4_17 */ + interrupt-parent = <&gpio2>; + interrupts = <9 0x8>; /* active-low GPIO2_9 */ regulators { vddcore_reg: bcore1 { @@ -162,6 +192,18 @@ }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -171,7 +213,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* PMIC interrupt */ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ >; @@ -206,6 +248,13 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + >; + }; + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 @@ -235,6 +284,24 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -293,22 +360,22 @@ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 >; }; - }; -}; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; - phy-supply = <&vdd_eth_io_reg>; - status = "disabled"; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + >; + }; + }; }; -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; +&pcie { + pinctrl-name = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 17 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index df7bcf86c156..394a4ace351a 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -35,7 +35,6 @@ compatible = "regulator-fixed"; reg = <1>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; regulator-name = "usbh1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -47,7 +46,6 @@ compatible = "regulator-fixed"; reg = <2>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -308,7 +306,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index baf2f00d519a..0565921877ab 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -35,6 +35,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_h1_vbus: regulator@1 { @@ -45,6 +46,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio1 29 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_audio: regulator@2 { @@ -107,10 +109,8 @@ "Headphone Jack", "HPOUTR", "Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", - "MICBIAS", "AMIC", - "IN3R", "MICBIAS", - "DMIC", "MICBIAS", - "DMICDAT", "DMIC"; + "AMIC", "MICBIAS", + "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <3>; }; @@ -179,7 +179,7 @@ codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 9596ed5867e6..39abef10a7bc 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -53,6 +53,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -82,7 +83,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; dma_apbh: dma-apbh@00110000 { @@ -122,6 +123,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; + interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_TWD>; }; @@ -151,10 +153,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, <&clks IMX6QDL_CLK_LVDS1_GATE>, <&clks IMX6QDL_CLK_PCIE_REF_125M>; @@ -680,8 +682,11 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; }; gpr: iomuxc-gpr@020e0000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index dfd83e6d8087..960a66930cc5 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -72,6 +72,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -95,7 +96,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; ocram: sram@00900000 { @@ -597,7 +598,10 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; }; gpr: iomuxc-gpr@020e0000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f3e88c03b1e4..22c9fc0fbc9e 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -88,6 +88,7 @@ interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; + interrupt-parent = <&intc>; }; clocks { @@ -131,7 +132,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; pmu { @@ -694,7 +695,10 @@ gpc: gpc@020dc000 { compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; }; iomuxc: iomuxc@020e0000 { diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi index 4773d6af66a0..d56d68fe7ffc 100644 --- a/arch/arm/boot/dts/k2e-clocks.dtsi +++ b/arch/arm/boot/dts/k2e-clocks.dtsi @@ -13,9 +13,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi index d5adee3c0067..af9b7190533a 100644 --- a/arch/arm/boot/dts/k2hk-clocks.dtsi +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi @@ -22,9 +22,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi index eb1e3e29f073..ef8464bb11ff 100644 --- a/arch/arm/boot/dts/k2l-clocks.dtsi +++ b/arch/arm/boot/dts/k2l-clocks.dtsi @@ -22,9 +22,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index bfa5edde179c..2c1e7f09205f 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -113,7 +113,7 @@ partition@e0000 { label = "u-boot environment"; - reg = <0xe0000 0x100000>; + reg = <0xe0000 0x20000>; }; partition@100000 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index a9aae88b74f5..bd603aa2cd82 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -176,7 +176,7 @@ tfp410_pins: pinmux_tfp410_pins { pinctrl-single,pins = < - 0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index bc82a12d4c2c..ae630a928acd 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -445,6 +445,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <1>; }; tlv320aic3x_aux: tlv320aic3x@19 { @@ -456,6 +458,8 @@ DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; + + ai3x-micbias-vg = <2>; }; tsl2563: tsl2563@29 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 159720d6c956..ec23e86e7e4f 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -174,8 +174,8 @@ i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < - 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ - 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ + 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ >; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index e06c11fa8698..516d62ac25a9 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -695,19 +695,19 @@ }; /* Variable factor clocks */ - sd1_clk: sd2_clk@e6150078 { + sd2_clk: sd2_clk@e6150078 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd1"; + clock-output-names = "sd2"; }; - sd2_clk: sd3_clk@e615026c { + sd3_clk: sd3_clk@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; + clock-output-names = "sd3"; }; mmc0_clk: mmc0_clk@e6150240 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; @@ -922,17 +922,20 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; + clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>, + <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1 R8A7791_CLK_SSUSB R8A7791_CLK_CMT1 + R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1 >; clock-output-names = "tpu0", "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1"; + "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1", + "usbdmac0", "usbdmac1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 57e00f9bce99..a25debb50401 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -198,10 +198,6 @@ status = "okay"; }; -&pwm { - status = "okay"; -}; - &pinctrl0 { gpio_leds: gpio-leds { samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index ff5bdaac987a..0ccb414cd268 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -172,7 +172,6 @@ clocks = <&clocks PCLK_PWM>; samsung,pwm-outputs = <0>, <1>; #pwm-cells = <3>; - status = "disabled"; }; pinctrl0: pinctrl@7f008000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index e0157b0f075c..0837c1afd666 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -985,7 +985,7 @@ dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 9d2323020d34..563640f59a41 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -995,23 +995,6 @@ status = "disabled"; }; - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - enable-active-high; - - states = <1800000 0x1 - 2900000 0x0>; - - status = "disabled"; - }; - mcde@a0350000 { compatible = "stericsson,mcde"; reg = <0xa0350000 0x1000>, /* MCDE */ diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index bf8f0eddc2c0..744c1e3a744d 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -111,6 +111,21 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index dbcf521b017f..a0dd81958285 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -117,7 +117,7 @@ mmcsd_default_mux: mmcsd_mux { mmcsd_default_mux { ste,function = "mmcsd"; - ste,pins = "mmcsd_a_1"; + ste,pins = "mmcsd_a_1", "mmcsd_b_1"; }; }; mmcsd_default_mode: mmcsd_default { @@ -127,9 +127,9 @@ ste,output = <0>; }; mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */ + /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ ste,pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13"; + "GPIO16_C13", "GPIO23_D15"; ste,output = <1>; }; mmcsd_default_cfg3 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 3e97a669f15e..17c4422def0e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -146,8 +146,21 @@ }; vmmci: regulator-gpio { + compatible = "regulator-gpio"; + gpios = <&gpio7 4 0x4>; enable-gpio = <&gpio6 25 0x4>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + enable-active-high; + + states = <1800000 0x1 + 2900000 0x0>; }; // External Micro SD slot diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 9e99ade35e37..0b43a186a36e 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -139,6 +139,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 15 0>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 891ea446abae..8ad4354b7feb 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -120,6 +120,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 0>; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 531272c0e526..fd2bcd3b7a9a 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -526,7 +526,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; + compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index b131068f4f35..f9b019991f86 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -474,7 +474,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; + compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 82097c905c48..dcff77817c22 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -896,7 +896,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; + compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = <0 29 4>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 8acf5d85c99d..f76fe94267d6 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -68,9 +68,9 @@ reset-names = "2d"; }; - gr3d@54140000 { + gr3d@54180000 { compatible = "nvidia,tegra20-gr3d"; - reg = <0x54140000 0x00040000>; + reg = <0x54180000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_GR3D>; resets = <&tegra_car 24>; reset-names = "3d"; @@ -130,9 +130,9 @@ status = "disabled"; }; - dsi@542c0000 { + dsi@54300000 { compatible = "nvidia,tegra20-dsi"; - reg = <0x542c0000 0x00040000>; + reg = <0x54300000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_DSI>; resets = <&tegra_car 48>; reset-names = "dsi"; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 322fd1519b09..7a2aeacd62c0 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -358,6 +358,204 @@ }; }; + etb@0,20010000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0x20010000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etb_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + + tpiu@0,20030000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0x20030000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + tpiu_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + replicator { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel_out_port0>; + }; + }; + }; + }; + + funnel@0,20040000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x20040000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel_out_port0: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + /* Input port #3 is for ITM, not supported here */ + + port@4 { + reg = <4>; + funnel_in_port4: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; + }; + }; + + port@5 { + reg = <5>; + funnel_in_port5: endpoint { + slave-mode; + remote-endpoint = <&etm2_out_port>; + }; + }; + }; + }; + + ptm@0,2201c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2201c000 0 0x1000>; + + cpu = <&cpu0>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + + ptm@0,2201d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2201d000 0 0x1000>; + + cpu = <&cpu1>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + + etm@0,2203c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2203c000 0 0x1000>; + + cpu = <&cpu2>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port2>; + }; + }; + }; + + etm@0,2203d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2203d000 0 0x1000>; + + cpu = <&cpu3>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port4>; + }; + }; + }; + + etm@0,2203e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2203e000 0 0x1000>; + + cpu = <&cpu4>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etm2_out_port: endpoint { + remote-endpoint = <&funnel_in_port5>; + }; + }; + }; + smb { compatible = "simple-bus"; |