diff options
Diffstat (limited to 'arch/arm/boot/dts/kirkwood.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/kirkwood.dtsi | 158 |
1 files changed, 124 insertions, 34 deletions
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 9809fc1f105c..8b73c80f1dad 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,5 +1,7 @@ /include/ "skeleton.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; @@ -11,6 +13,7 @@ cpu@0 { device_type = "cpu"; compatible = "marvell,feroceon"; + reg = <0>; clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; clock-names = "cpu_clk", "ddrclk", "powersave"; }; @@ -20,23 +23,80 @@ gpio0 = &gpio0; gpio1 = &gpio1; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc", "marvell,intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020204 0x04>, - <0xf1020214 0x04>; + + mbus { + compatible = "marvell,kirkwood-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + /* If a board file needs to change this ranges it must replace it completely */ + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */ + MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */ + MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */ + >; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ + pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ + + crypto@0301 { + compatible = "marvell,orion-crypto"; + reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, + <MBUS_ID(0x03, 0x01) 0 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + clocks = <&gate_clk 17>; + status = "okay"; + }; + + nand: nand@012f { + #address-cells = <1>; + #size-cells = <1>; + cle = <0>; + ale = <1>; + bank-width = <1>; + compatible = "marvell,orion-nand"; + reg = <MBUS_ID(0x01, 0x2f) 0 0x400>; + chip-delay = <25>; + /* set partition map and/or chip-delay in board dts */ + clocks = <&gate_clk 7>; + status = "disabled"; + }; }; ocp@f1000000 { compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x0100000 - 0xe0000000 0xe0000000 0x8100000 /* PCIE */ - 0xf4000000 0xf4000000 0x0000400 - 0xf5000000 0xf5000000 0x0000400>; + ranges = <0x00000000 0xf1000000 0x0100000>; #address-cells = <1>; #size-cells = <1>; + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x1500 0x20>; + }; + + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <1>; + marvell,#interrupts = <6>; + }; + core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; @@ -103,9 +163,11 @@ #clock-cells = <1>; }; - wdt@20300 { + wdt: watchdog-timer@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; clocks = <&gate_clk 7>; status = "okay"; }; @@ -133,7 +195,7 @@ xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 - 0xd0B00 0x100>; + 0x60B00 0x100>; status = "okay"; clocks = <&gate_clk 16>; @@ -158,20 +220,6 @@ status = "okay"; }; - nand@3000000 { - #address-cells = <1>; - #size-cells = <1>; - cle = <0>; - ale = <1>; - bank-width = <1>; - compatible = "marvell,orion-nand"; - reg = <0xf4000000 0x400>; - chip-delay = <25>; - /* set partition map and/or chip-delay in board dts */ - clocks = <&gate_clk 7>; - status = "disabled"; - }; - i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; @@ -183,14 +231,56 @@ status = "disabled"; }; - crypto@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xf5000000 0x800>; - reg-names = "regs", "sram"; - interrupts = <22>; - clocks = <&gate_clk 17>; - status = "okay"; + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <46>; + clocks = <&gate_clk 0>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + eth0: ethernet-controller@72000 { + compatible = "marvell,kirkwood-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 0>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet0-port@0 { + device_type = "network"; + compatible = "marvell,kirkwood-eth-port"; + reg = <0>; + interrupts = <11>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + eth1: ethernet-controller@76000 { + compatible = "marvell,kirkwood-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76000 0x4000>; + clocks = <&gate_clk 19>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet1-port@0 { + device_type = "network"; + compatible = "marvell,kirkwood-eth-port"; + reg = <0>; + interrupts = <15>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; }; }; }; |