aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6q.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx6q.dtsi')
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi796
1 files changed, 16 insertions, 780 deletions
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d6265ca97119..cba021eb035e 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -1,33 +1,16 @@
+
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
+ * Copyright 2013 Freescale Semiconductor, Inc.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+/include/ "imx6qdl.dtsi"
/ {
- aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- gpio5 = &gpio6;
- gpio6 = &gpio7;
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -38,12 +21,19 @@
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
- 792000 1100000
+ 1200000 1275000
+ 996000 1250000
+ 792000 1150000
396000 950000
- 198000 850000
>;
clock-latency = <61036>; /* two CLK32 periods */
- cpu0-supply = <&reg_cpu>;
+ clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+ <&clks 17>, <&clks 170>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <&reg_arm>;
+ pu-supply = <&reg_pu>;
+ soc-supply = <&reg_soc>;
};
cpu@1 {
@@ -65,142 +55,9 @@
};
};
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil {
- compatible = "fsl,imx-ckil", "fixed-clock";
- clock-frequency = <32768>;
- };
-
- ckih1 {
- compatible = "fsl,imx-ckih1", "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc {
- compatible = "fsl,imx-osc", "fixed-clock";
- clock-frequency = <24000000>;
- };
- };
-
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&intc>;
- ranges;
-
- dma-apbh@00110000 {
- compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
- reg = <0x00110000 0x2000>;
- clocks = <&clks 106>;
- };
-
- nfc: gpmi-nand@00112000 {
- compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
- reg-names = "gpmi-nand", "bch";
- interrupts = <0 13 0x04>, <0 15 0x04>;
- interrupt-names = "gpmi-dma", "bch";
- clocks = <&clks 152>, <&clks 153>, <&clks 151>,
- <&clks 150>, <&clks 149>;
- clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
- "gpmi_bch_apb", "per1_bch";
- fsl,gpmi-dma-channel = <0>;
- status = "disabled";
- };
-
- timer@00a00600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x00a00600 0x20>;
- interrupts = <1 13 0xf01>;
- };
-
- L2: l2-cache@00a02000 {
- compatible = "arm,pl310-cache";
- reg = <0x00a02000 0x1000>;
- interrupts = <0 92 0x04>;
- cache-unified;
- cache-level = <2>;
- };
-
aips-bus@02000000 { /* AIPS1 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x100000>;
- ranges;
-
spba-bus@02000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x40000>;
- ranges;
-
- spdif: spdif@02004000 {
- reg = <0x02004000 0x4000>;
- interrupts = <0 52 0x04>;
- };
-
- ecspi1: ecspi@02008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02008000 0x4000>;
- interrupts = <0 31 0x04>;
- clocks = <&clks 112>, <&clks 112>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi2: ecspi@0200c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x0200c000 0x4000>;
- interrupts = <0 32 0x04>;
- clocks = <&clks 113>, <&clks 113>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi3: ecspi@02010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02010000 0x4000>;
- interrupts = <0 33 0x04>;
- clocks = <&clks 114>, <&clks 114>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi4: ecspi@02014000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02014000 0x4000>;
- interrupts = <0 34 0x04>;
- clocks = <&clks 115>, <&clks 115>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -211,361 +68,6 @@
clock-names = "ipg", "per";
status = "disabled";
};
-
- uart1: serial@02020000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <0 26 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- esai: esai@02024000 {
- reg = <0x02024000 0x4000>;
- interrupts = <0 51 0x04>;
- };
-
- ssi1: ssi@02028000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x02028000 0x4000>;
- interrupts = <0 46 0x04>;
- clocks = <&clks 178>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <38 37>;
- status = "disabled";
- };
-
- ssi2: ssi@0202c000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x0202c000 0x4000>;
- interrupts = <0 47 0x04>;
- clocks = <&clks 179>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <42 41>;
- status = "disabled";
- };
-
- ssi3: ssi@02030000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x02030000 0x4000>;
- interrupts = <0 48 0x04>;
- clocks = <&clks 180>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <46 45>;
- status = "disabled";
- };
-
- asrc: asrc@02034000 {
- reg = <0x02034000 0x4000>;
- interrupts = <0 50 0x04>;
- };
-
- spba@0203c000 {
- reg = <0x0203c000 0x4000>;
- };
- };
-
- vpu: vpu@02040000 {
- reg = <0x02040000 0x3c000>;
- interrupts = <0 3 0x04 0 12 0x04>;
- };
-
- aipstz@0207c000 { /* AIPSTZ1 */
- reg = <0x0207c000 0x4000>;
- };
-
- pwm1: pwm@02080000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02080000 0x4000>;
- interrupts = <0 83 0x04>;
- clocks = <&clks 62>, <&clks 145>;
- clock-names = "ipg", "per";
- };
-
- pwm2: pwm@02084000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02084000 0x4000>;
- interrupts = <0 84 0x04>;
- clocks = <&clks 62>, <&clks 146>;
- clock-names = "ipg", "per";
- };
-
- pwm3: pwm@02088000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02088000 0x4000>;
- interrupts = <0 85 0x04>;
- clocks = <&clks 62>, <&clks 147>;
- clock-names = "ipg", "per";
- };
-
- pwm4: pwm@0208c000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x0208c000 0x4000>;
- interrupts = <0 86 0x04>;
- clocks = <&clks 62>, <&clks 148>;
- clock-names = "ipg", "per";
- };
-
- can1: flexcan@02090000 {
- reg = <0x02090000 0x4000>;
- interrupts = <0 110 0x04>;
- };
-
- can2: flexcan@02094000 {
- reg = <0x02094000 0x4000>;
- interrupts = <0 111 0x04>;
- };
-
- gpt: gpt@02098000 {
- compatible = "fsl,imx6q-gpt";
- reg = <0x02098000 0x4000>;
- interrupts = <0 55 0x04>;
- };
-
- gpio1: gpio@0209c000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x0209c000 0x4000>;
- interrupts = <0 66 0x04 0 67 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@020a0000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a0000 0x4000>;
- interrupts = <0 68 0x04 0 69 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@020a4000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a4000 0x4000>;
- interrupts = <0 70 0x04 0 71 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@020a8000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a8000 0x4000>;
- interrupts = <0 72 0x04 0 73 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@020ac000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020ac000 0x4000>;
- interrupts = <0 74 0x04 0 75 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio6: gpio@020b0000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020b0000 0x4000>;
- interrupts = <0 76 0x04 0 77 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio7: gpio@020b4000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020b4000 0x4000>;
- interrupts = <0 78 0x04 0 79 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- kpp: kpp@020b8000 {
- reg = <0x020b8000 0x4000>;
- interrupts = <0 82 0x04>;
- };
-
- wdog1: wdog@020bc000 {
- compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
- reg = <0x020bc000 0x4000>;
- interrupts = <0 80 0x04>;
- clocks = <&clks 0>;
- };
-
- wdog2: wdog@020c0000 {
- compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
- reg = <0x020c0000 0x4000>;
- interrupts = <0 81 0x04>;
- clocks = <&clks 0>;
- status = "disabled";
- };
-
- clks: ccm@020c4000 {
- compatible = "fsl,imx6q-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <0 87 0x04 0 88 0x04>;
- #clock-cells = <1>;
- };
-
- anatop: anatop@020c8000 {
- compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
- reg = <0x020c8000 0x1000>;
- interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
-
- regulator-1p1@110 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd1p1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1375000>;
- regulator-always-on;
- anatop-reg-offset = <0x110>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <4>;
- anatop-min-voltage = <800000>;
- anatop-max-voltage = <1375000>;
- };
-
- regulator-3p0@120 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd3p0";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3150000>;
- regulator-always-on;
- anatop-reg-offset = <0x120>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2625000>;
- anatop-max-voltage = <3400000>;
- };
-
- regulator-2p5@130 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd2p5";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2750000>;
- regulator-always-on;
- anatop-reg-offset = <0x130>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2000000>;
- anatop-max-voltage = <2750000>;
- };
-
- reg_cpu: regulator-vddcore@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "cpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <0>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- regulator-vddpu@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <9>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- regulator-vddsoc@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddsoc";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <18>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
- };
-
- usbphy1: usbphy@020c9000 {
- compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
- reg = <0x020c9000 0x1000>;
- interrupts = <0 44 0x04>;
- clocks = <&clks 182>;
- };
-
- usbphy2: usbphy@020ca000 {
- compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
- reg = <0x020ca000 0x1000>;
- interrupts = <0 45 0x04>;
- clocks = <&clks 183>;
- };
-
- snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
-
- snvs-rtc-lp@34 {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
- interrupts = <0 19 0x04 0 20 0x04>;
- };
- };
-
- epit1: epit@020d0000 { /* EPIT1 */
- reg = <0x020d0000 0x4000>;
- interrupts = <0 56 0x04>;
- };
-
- epit2: epit@020d4000 { /* EPIT2 */
- reg = <0x020d4000 0x4000>;
- interrupts = <0 57 0x04>;
- };
-
- src: src@020d8000 {
- compatible = "fsl,imx6q-src";
- reg = <0x020d8000 0x4000>;
- interrupts = <0 91 0x04 0 96 0x04>;
- };
-
- gpc: gpc@020dc000 {
- compatible = "fsl,imx6q-gpc";
- reg = <0x020dc000 0x4000>;
- interrupts = <0 89 0x04 0 90 0x04>;
- };
-
- gpr: iomuxc-gpr@020e0000 {
- compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
- reg = <0x020e0000 0x38>;
};
iomuxc: iomuxc@020e0000 {
@@ -780,272 +282,6 @@
};
};
};
-
- dcic1: dcic@020e4000 {
- reg = <0x020e4000 0x4000>;
- interrupts = <0 124 0x04>;
- };
-
- dcic2: dcic@020e8000 {
- reg = <0x020e8000 0x4000>;
- interrupts = <0 125 0x04>;
- };
-
- sdma: sdma@020ec000 {
- compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
- reg = <0x020ec000 0x4000>;
- interrupts = <0 2 0x04>;
- clocks = <&clks 155>, <&clks 155>;
- clock-names = "ipg", "ahb";
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
- };
- };
-
- aips-bus@02100000 { /* AIPS2 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02100000 0x100000>;
- ranges;
-
- caam@02100000 {
- reg = <0x02100000 0x40000>;
- interrupts = <0 105 0x04 0 106 0x04>;
- };
-
- aipstz@0217c000 { /* AIPSTZ2 */
- reg = <0x0217c000 0x4000>;
- };
-
- usbotg: usb@02184000 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184000 0x200>;
- interrupts = <0 43 0x04>;
- clocks = <&clks 162>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- status = "disabled";
- };
-
- usbh1: usb@02184200 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184200 0x200>;
- interrupts = <0 40 0x04>;
- clocks = <&clks 162>;
- fsl,usbphy = <&usbphy2>;
- fsl,usbmisc = <&usbmisc 1>;
- status = "disabled";
- };
-
- usbh2: usb@02184400 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184400 0x200>;
- interrupts = <0 41 0x04>;
- clocks = <&clks 162>;
- fsl,usbmisc = <&usbmisc 2>;
- status = "disabled";
- };
-
- usbh3: usb@02184600 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184600 0x200>;
- interrupts = <0 42 0x04>;
- clocks = <&clks 162>;
- fsl,usbmisc = <&usbmisc 3>;
- status = "disabled";
- };
-
- usbmisc: usbmisc: usbmisc@02184800 {
- #index-cells = <1>;
- compatible = "fsl,imx6q-usbmisc";
- reg = <0x02184800 0x200>;
- clocks = <&clks 162>;
- };
-
- fec: ethernet@02188000 {
- compatible = "fsl,imx6q-fec";
- reg = <0x02188000 0x4000>;
- interrupts = <0 118 0x04 0 119 0x04>;
- clocks = <&clks 117>, <&clks 117>, <&clks 177>;
- clock-names = "ipg", "ahb", "ptp";
- status = "disabled";
- };
-
- mlb@0218c000 {
- reg = <0x0218c000 0x4000>;
- interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
- };
-
- usdhc1: usdhc@02190000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02190000 0x4000>;
- interrupts = <0 22 0x04>;
- clocks = <&clks 163>, <&clks 163>, <&clks 163>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc2: usdhc@02194000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02194000 0x4000>;
- interrupts = <0 23 0x04>;
- clocks = <&clks 164>, <&clks 164>, <&clks 164>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc3: usdhc@02198000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02198000 0x4000>;
- interrupts = <0 24 0x04>;
- clocks = <&clks 165>, <&clks 165>, <&clks 165>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc4: usdhc@0219c000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x0219c000 0x4000>;
- interrupts = <0 25 0x04>;
- clocks = <&clks 166>, <&clks 166>, <&clks 166>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- i2c1: i2c@021a0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a0000 0x4000>;
- interrupts = <0 36 0x04>;
- clocks = <&clks 125>;
- status = "disabled";
- };
-
- i2c2: i2c@021a4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a4000 0x4000>;
- interrupts = <0 37 0x04>;
- clocks = <&clks 126>;
- status = "disabled";
- };
-
- i2c3: i2c@021a8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a8000 0x4000>;
- interrupts = <0 38 0x04>;
- clocks = <&clks 127>;
- status = "disabled";
- };
-
- romcp@021ac000 {
- reg = <0x021ac000 0x4000>;
- };
-
- mmdc0: mmdc@021b0000 { /* MMDC0 */
- compatible = "fsl,imx6q-mmdc";
- reg = <0x021b0000 0x4000>;
- };
-
- mmdc1: mmdc@021b4000 { /* MMDC1 */
- reg = <0x021b4000 0x4000>;
- };
-
- weim@021b8000 {
- reg = <0x021b8000 0x4000>;
- interrupts = <0 14 0x04>;
- };
-
- ocotp@021bc000 {
- reg = <0x021bc000 0x4000>;
- };
-
- ocotp@021c0000 {
- reg = <0x021c0000 0x4000>;
- interrupts = <0 21 0x04>;
- };
-
- tzasc@021d0000 { /* TZASC1 */
- reg = <0x021d0000 0x4000>;
- interrupts = <0 108 0x04>;
- };
-
- tzasc@021d4000 { /* TZASC2 */
- reg = <0x021d4000 0x4000>;
- interrupts = <0 109 0x04>;
- };
-
- audmux: audmux@021d8000 {
- compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
- reg = <0x021d8000 0x4000>;
- status = "disabled";
- };
-
- mipi@021dc000 { /* MIPI-CSI */
- reg = <0x021dc000 0x4000>;
- };
-
- mipi@021e0000 { /* MIPI-DSI */
- reg = <0x021e0000 0x4000>;
- };
-
- vdoa@021e4000 {
- reg = <0x021e4000 0x4000>;
- interrupts = <0 18 0x04>;
- };
-
- uart2: serial@021e8000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021e8000 0x4000>;
- interrupts = <0 27 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart3: serial@021ec000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021ec000 0x4000>;
- interrupts = <0 28 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart4: serial@021f0000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f0000 0x4000>;
- interrupts = <0 29 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart5: serial@021f4000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f4000 0x4000>;
- interrupts = <0 30 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
- };
-
- ipu1: ipu@02400000 {
- #crtc-cells = <1>;
- compatible = "fsl,imx6q-ipu";
- reg = <0x02400000 0x400000>;
- interrupts = <0 6 0x4 0 5 0x4>;
- clocks = <&clks 130>, <&clks 131>, <&clks 132>;
- clock-names = "bus", "di0", "di1";
};
ipu2: ipu@02800000 {
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 02:28:23 +0000