diff options
Diffstat (limited to 'Documentation')
62 files changed, 3125 insertions, 120 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index a1a643272883..2214f123a976 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -104,6 +104,8 @@ cpuidle/ - info on CPU_IDLE, CPU idle state management subsystem. cputopology.txt - documentation on how CPU topology info is exported via sysfs. +crc32.txt + - brief tutorial on CRC computation cris/ - directory with info about Linux on CRIS architecture. crypto/ diff --git a/Documentation/ABI/testing/sysfs-bus-rpmsg b/Documentation/ABI/testing/sysfs-bus-rpmsg new file mode 100644 index 000000000000..189e419a5a2d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-rpmsg @@ -0,0 +1,75 @@ +What: /sys/bus/rpmsg/devices/.../name +Date: June 2011 +KernelVersion: 3.3 +Contact: Ohad Ben-Cohen <ohad@wizery.com> +Description: + Every rpmsg device is a communication channel with a remote + processor. Channels are identified with a (textual) name, + which is maximum 32 bytes long (defined as RPMSG_NAME_SIZE in + rpmsg.h). + + This sysfs entry contains the name of this channel. + +What: /sys/bus/rpmsg/devices/.../src +Date: June 2011 +KernelVersion: 3.3 +Contact: Ohad Ben-Cohen <ohad@wizery.com> +Description: + Every rpmsg device is a communication channel with a remote + processor. Channels have a local ("source") rpmsg address, + and remote ("destination") rpmsg address. When an entity + starts listening on one end of a channel, it assigns it with + a unique rpmsg address (a 32 bits integer). This way when + inbound messages arrive to this address, the rpmsg core + dispatches them to the listening entity (a kernel driver). + + This sysfs entry contains the src (local) rpmsg address + of this channel. If it contains 0xffffffff, then an address + wasn't assigned (can happen if no driver exists for this + channel). + +What: /sys/bus/rpmsg/devices/.../dst +Date: June 2011 +KernelVersion: 3.3 +Contact: Ohad Ben-Cohen <ohad@wizery.com> +Description: + Every rpmsg device is a communication channel with a remote + processor. Channels have a local ("source") rpmsg address, + and remote ("destination") rpmsg address. When an entity + starts listening on one end of a channel, it assigns it with + a unique rpmsg address (a 32 bits integer). This way when + inbound messages arrive to this address, the rpmsg core + dispatches them to the listening entity. + + This sysfs entry contains the dst (remote) rpmsg address + of this channel. If it contains 0xffffffff, then an address + wasn't assigned (can happen if the kernel driver that + is attached to this channel is exposing a service to the + remote processor. This make it a local rpmsg server, + and it is listening for inbound messages that may be sent + from any remote rpmsg client; it is not bound to a single + remote entity). + +What: /sys/bus/rpmsg/devices/.../announce +Date: June 2011 +KernelVersion: 3.3 +Contact: Ohad Ben-Cohen <ohad@wizery.com> +Description: + Every rpmsg device is a communication channel with a remote + processor. Channels are identified by a textual name (see + /sys/bus/rpmsg/devices/.../name above) and have a local + ("source") rpmsg address, and remote ("destination") rpmsg + address. + + A channel is first created when an entity, whether local + or remote, starts listening on it for messages (and is thus + called an rpmsg server). + + When that happens, a "name service" announcement is sent + to the other processor, in order to let it know about the + creation of the channel (this way remote clients know they + can start sending messages). + + This sysfs entry tells us whether the channel is a local + server channel that is announced (values are either + true or false). diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index d71b57fcf116..4ee4ba3509fc 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -362,6 +362,23 @@ </para> </para> </sect1> + <sect1 id="kgdbreboot"> + <title>Run time parameter: kgdbreboot</title> + <para> The kgdbreboot feature allows you to change how the debugger + deals with the reboot notification. You have 3 choices for the + behavior. The default behavior is always set to 0.</para> + <orderedlist> + <listitem><para>echo -1 > /sys/module/debug_core/parameters/kgdbreboot</para> + <para>Ignore the reboot notification entirely.</para> + </listitem> + <listitem><para>echo 0 > /sys/module/debug_core/parameters/kgdbreboot</para> + <para>Send the detach message to any attached debugger client.</para> + </listitem> + <listitem><para>echo 1 > /sys/module/debug_core/parameters/kgdbreboot</para> + <para>Enter the debugger on reboot notify.</para> + </listitem> + </orderedlist> + </sect1> </chapter> <chapter id="usingKDB"> <title>Using kdb</title> diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index cea6fd3ed428..7dc65c592a87 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -128,6 +128,26 @@ url="http://www.ijg.org">http://www.ijg.org</ulink>)</corpauthor> <subtitle>Version 1.02</subtitle> </biblioentry> + <biblioentry id="itu-t81"> + <abbrev>ITU-T.81</abbrev> + <authorgroup> + <corpauthor>International Telecommunication Union +(<ulink url="http://www.itu.int">http://www.itu.int</ulink>)</corpauthor> + </authorgroup> + <title>ITU-T Recommendation T.81 +"Information Technology — Digital Compression and Coding of Continous-Tone +Still Images — Requirements and Guidelines"</title> + </biblioentry> + + <biblioentry id="w3c-jpeg-jfif"> + <abbrev>W3C JPEG JFIF</abbrev> + <authorgroup> + <corpauthor>The World Wide Web Consortium (<ulink +url="http://www.w3.org/Graphics/JPEG">http://www.w3.org</ulink>)</corpauthor> + </authorgroup> + <title>JPEG JFIF</title> + </biblioentry> + <biblioentry id="smpte12m"> <abbrev>SMPTE 12M</abbrev> <authorgroup> diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index a2485b3ff3d2..bce97c50391b 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2393,6 +2393,20 @@ details.</para> to the <link linkend="control">User controls class</link>. </para> </listitem> + <listitem> + <para>Added the device_caps field to struct v4l2_capabilities and added the new + V4L2_CAP_DEVICE_CAPS capability.</para> + </listitem> + </orderedlist> + </section> + + <section> + <title>V4L2 in Linux 3.4</title> + <orderedlist> + <listitem> + <para>Added <link linkend="jpeg-controls">JPEG compression control + class</link>.</para> + </listitem> </orderedlist> </section> diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index a1be37897ad7..b84f25e9cc87 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -1286,6 +1286,49 @@ produce a slight hiss, but in the encoder itself, guaranteeing a fixed and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry> </row> <row><entry></entry></row> + <row id="v4l2-mpeg-audio-dec-playback"> + <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant> </entry> + <entry>enum v4l2_mpeg_audio_dec_playback</entry> + </row><row><entry spanname="descr">Determines how monolingual audio should be played back. +Possible values are:</entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO</constant> </entry> + <entry>Automatically determines the best playback mode.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO</constant> </entry> + <entry>Stereo playback.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT</constant> </entry> + <entry>Left channel playback.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT</constant> </entry> + <entry>Right channel playback.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO</constant> </entry> + <entry>Mono playback.</entry> + </row> + <row> + <entry><constant>V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO</constant> </entry> + <entry>Stereo playback with swapped left and right channels.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + <row id="v4l2-mpeg-audio-dec-multilingual-playback"> + <entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant> </entry> + <entry>enum v4l2_mpeg_audio_dec_playback</entry> + </row><row><entry spanname="descr">Determines how multilingual audio should be played back.</entry> + </row> + <row><entry></entry></row> <row id="v4l2-mpeg-video-encoding"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_ENCODING</constant> </entry> <entry>enum v4l2_mpeg_video_encoding</entry> @@ -1447,6 +1490,22 @@ of the video. The supplied 32-bit integer is interpreted as follows (bit </tbody> </entrytbl> </row> + <row><entry></entry></row> + <row id="v4l2-mpeg-video-dec-pts"> + <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_PTS</constant> </entry> + <entry>integer64</entry> + </row><row><entry spanname="descr">This read-only control returns the +33-bit video Presentation Time Stamp as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1 of +the currently displayed frame. This is the same PTS as is used in &VIDIOC-DECODER-CMD;.</entry> + </row> + <row><entry></entry></row> + <row id="v4l2-mpeg-video-dec-frame"> + <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DEC_FRAME</constant> </entry> + <entry>integer64</entry> + </row><row><entry spanname="descr">This read-only control returns the +frame counter of the frame that is currently displayed (decoded). This value is reset to 0 whenever +the decoder is started.</entry> + </row> <row><entry></entry></row> @@ -3377,6 +3436,167 @@ interface and may change in the future.</para> </tbody> </tgroup> </table> + </section> + + <section id="jpeg-controls"> + <title>JPEG Control Reference</title> + <para>The JPEG class includes controls for common features of JPEG + encoders and decoders. Currently it includes features for codecs + implementing progressive baseline DCT compression process with + Huffman entrophy coding.</para> + <table pgwide="1" frame="none" id="jpeg-control-id"> + <title>JPEG Control IDs</title> + <tgroup cols="4"> + <colspec colname="c1" colwidth="1*" /> + <colspec colname="c2" colwidth="6*" /> + <colspec colname="c3" colwidth="2*" /> + <colspec colname="c4" colwidth="6*" /> + <spanspec namest="c1" nameend="c2" spanname="id" /> + <spanspec namest="c2" nameend="c4" spanname="descr" /> + <thead> + <row> + <entry spanname="id" align="left">ID</entry> + <entry align="left">Type</entry> + </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry> + </row> + </thead> + <tbody valign="top"> + <row><entry></entry></row> + <row> + <entry spanname="id"><constant>V4L2_CID_JPEG_CLASS</constant> </entry> + <entry>class</entry> + </row><row><entry spanname="descr">The JPEG class descriptor. Calling + &VIDIOC-QUERYCTRL; for this control will return a description of this + control class. + + </entry> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant></entry> + <entry>menu</entry> + </row> + <row id="jpeg-chroma-subsampling-control"> + <entry spanname="descr">The chroma subsampling factors describe how + each component of an input image is sampled, in respect to maximum + sample rate in each spatial dimension. See <xref linkend="itu-t81"/>, + clause A.1.1. for more details. The <constant> + V4L2_CID_JPEG_CHROMA_SUBSAMPLING</constant> control determines how + Cb and Cr components are downsampled after coverting an input image + from RGB to Y'CbCr color space. + </entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_444</constant> + </entry><entry>No chroma subsampling, each pixel has + Y, Cr and Cb values.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_422</constant> + </entry><entry>Horizontally subsample Cr, Cb components + by a factor of 2.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_420</constant> + </entry><entry>Subsample Cr, Cb components horizontally + and vertically by 2.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_411</constant> + </entry><entry>Horizontally subsample Cr, Cb components + by a factor of 4.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_410</constant> + </entry><entry>Subsample Cr, Cb components horizontally + by 4 and vertically by 2.</entry> + </row> + <row> + <entry><constant>V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY</constant> + </entry><entry>Use only luminance component.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row> + <entry spanname="id"><constant>V4L2_CID_JPEG_RESTART_INTERVAL</constant> + </entry><entry>integer</entry> + </row> + <row><entry spanname="descr"> + The restart interval determines an interval of inserting RSTm + markers (m = 0..7). The purpose of these markers is to additionally + reinitialize the encoder process, in order to process blocks of + an image independently. + For the lossy compression processes the restart interval unit is + MCU (Minimum Coded Unit) and its value is contained in DRI + (Define Restart Interval) marker. If <constant> + V4L2_CID_JPEG_RESTART_INTERVAL</constant> control is set to 0, + DRI and RSTm markers will not be inserted. + </entry> + </row> + <row id="jpeg-quality-control"> + <entry spanname="id"><constant>V4L2_CID_JPEG_COMPRESION_QUALITY</constant></entry> + <entry>integer</entry> + </row> + <row> + <entry spanname="descr"> + <constant>V4L2_CID_JPEG_COMPRESION_QUALITY</constant> control + determines trade-off between image quality and size. + It provides simpler method for applications to control image quality, + without a need for direct reconfiguration of luminance and chrominance + quantization tables. + + In cases where a driver uses quantization tables configured directly + by an application, using interfaces defined elsewhere, <constant> + V4L2_CID_JPEG_COMPRESION_QUALITY</constant> control should be set + by driver to 0. + + <para>The value range of this control is driver-specific. Only + positive, non-zero values are meaningful. The recommended range + is 1 - 100, where larger values correspond to better image quality. + </para> + </entry> + </row> + <row id="jpeg-active-marker-control"> + <entry spanname="id"><constant>V4L2_CID_JPEG_ACTIVE_MARKER</constant></entry> + <entry>bitmask</entry> + </row> + <row> + <entry spanname="descr">Specify which JPEG markers are included + in compressed stream. This control is valid only for encoders. + </entry> + </row> + <row> + <entrytbl spanname="descr" cols="2"> + <tbody valign="top"> + <row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_APP0</constant></entry> + <entry>Application data segment APP<subscript>0</subscript>.</entry> + </row><row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_APP1</constant></entry> + <entry>Application data segment APP<subscript>1</subscript>.</entry> + </row><row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_COM</constant></entry> + <entry>Comment segment.</entry> + </row><row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_DQT</constant></entry> + <entry>Quantization tables segment.</entry> + </row><row> + <entry><constant>V4L2_JPEG_ACTIVE_MARKER_DHT</constant></entry> + <entry>Huffman tables segment.</entry> + </row> + </tbody> + </entrytbl> + </row> + <row><entry></entry></row> + </tbody> + </tgroup> + </table> + <para>For more details about JPEG specification, refer + to <xref linkend="itu-t81"/>, <xref linkend="jfif"/>, + <xref linkend="w3c-jpeg-jfif"/>.</para> </section> </section> diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index 2f0bdb4d5551..b299e4779354 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -52,6 +52,10 @@ cropping and composing rectangles have the same size.</para> </textobject> </mediaobject> </figure> + +For complete list of the available selection targets see table <xref +linkend="v4l2-sel-target"/> + </section> <section> @@ -186,7 +190,7 @@ V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para> <section> - <title>Scaling control.</title> + <title>Scaling control</title> <para>An application can detect if scaling is performed by comparing the width and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP_ACTIVE @@ -200,7 +204,7 @@ the scaling ratios using these values.</para> <section> - <title>Comparison with old cropping API.</title> + <title>Comparison with old cropping API</title> <para>The selection API was introduced to cope with deficiencies of previous <link linkend="crop"> API </link>, that was designed to control simple capture diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index e97c512861bb..8ae38876172e 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -128,6 +128,22 @@ structs, ioctls) must be noted in more detail in the history chapter applications. --> <revision> + <revnumber>3.4</revnumber> + <date>2012-01-25</date> + <authorinitials>sn</authorinitials> + <revremark>Added <link linkend="jpeg-controls">JPEG compression + control class.</link> + </revremark> + </revision> + + <revision> + <revnumber>3.3</revnumber> + <date>2012-01-11</date> + <authorinitials>hv</authorinitials> + <revremark>Added device_caps field to struct v4l2_capabilities.</revremark> + </revision> + + <revision> <revnumber>3.2</revnumber> <date>2011-08-26</date> <authorinitials>hv</authorinitials> @@ -417,7 +433,7 @@ and discussions on the V4L mailing list.</revremark> </partinfo> <title>Video for Linux Two API Specification</title> - <subtitle>Revision 3.2</subtitle> + <subtitle>Revision 3.3</subtitle> <chapter id="common"> &sub-common; @@ -473,6 +489,7 @@ and discussions on the V4L mailing list.</revremark> &sub-cropcap; &sub-dbg-g-chip-ident; &sub-dbg-g-register; + &sub-decoder-cmd; &sub-dqevent; &sub-encoder-cmd; &sub-enumaudio; diff --git a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml new file mode 100644 index 000000000000..74b87f6e480a --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml @@ -0,0 +1,256 @@ +<refentry id="vidioc-decoder-cmd"> + <refmeta> + <refentrytitle>ioctl VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_DECODER_CMD</refname> + <refname>VIDIOC_TRY_DECODER_CMD</refname> + <refpurpose>Execute an decoder command</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_decoder_cmd *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + + <para>This is an <link linkend="experimental">experimental</link> +interface and may change in the future.</para> + </note> + + <para>These ioctls control an audio/video (usually MPEG-) decoder. +<constant>VIDIOC_DECODER_CMD</constant> sends a command to the +decoder, <constant>VIDIOC_TRY_DECODER_CMD</constant> can be used to +try a command without actually executing it. To send a command applications +must initialize all fields of a &v4l2-decoder-cmd; and call +<constant>VIDIOC_DECODER_CMD</constant> or <constant>VIDIOC_TRY_DECODER_CMD</constant> +with a pointer to this structure.</para> + + <para>The <structfield>cmd</structfield> field must contain the +command code. Some commands use the <structfield>flags</structfield> field for +additional information. +</para> + + <para>A <function>write</function>() or &VIDIOC-STREAMON; call sends an implicit +START command to the decoder if it has not been started yet. +</para> + + <para>A <function>close</function>() or &VIDIOC-STREAMOFF; call of a streaming +file descriptor sends an implicit immediate STOP command to the decoder, and all +buffered data is discarded.</para> + + <para>These ioctls are optional, not all drivers may support +them. They were introduced in Linux 3.3.</para> + + <table pgwide="1" frame="none" id="v4l2-decoder-cmd"> + <title>struct <structname>v4l2_decoder_cmd</structname></title> + <tgroup cols="5"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>cmd</structfield></entry> + <entry></entry> + <entry></entry> + <entry>The decoder command, see <xref linkend="decoder-cmds" />.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry></entry> + <entry></entry> + <entry>Flags to go with the command. If no flags are defined for +this command, drivers and applications must set this field to zero.</entry> + </row> + <row> + <entry>union</entry> + <entry>(anonymous)</entry> + <entry></entry> + <entry></entry> + <entry></entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>start</structfield></entry> + <entry></entry> + <entry>Structure containing additional data for the +<constant>V4L2_DEC_CMD_START</constant> command.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__s32</entry> + <entry><structfield>speed</structfield></entry> + <entry>Playback speed and direction. The playback speed is defined as +<structfield>speed</structfield>/1000 of the normal speed. So 1000 is normal playback. +Negative numbers denote reverse playback, so -1000 does reverse playback at normal +speed. Speeds -1, 0 and 1 have special meanings: speed 0 is shorthand for 1000 +(normal playback). A speed of 1 steps just one frame forward, a speed of -1 steps +just one frame back. + </entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>format</structfield></entry> + <entry>Format restrictions. This field is set by the driver, not the +application. Possible values are <constant>V4L2_DEC_START_FMT_NONE</constant> if +there are no format restrictions or <constant>V4L2_DEC_START_FMT_GOP</constant> +if the decoder operates on full GOPs (<wordasword>Group Of Pictures</wordasword>). +This is usually the case for reverse playback: the decoder needs full GOPs, which +it can then play in reverse order. So to implement reverse playback the application +must feed the decoder the last GOP in the video file, then the GOP before that, etc. etc. + </entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>stop</structfield></entry> + <entry></entry> + <entry>Structure containing additional data for the +<constant>V4L2_DEC_CMD_STOP</constant> command.</entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u64</entry> + <entry><structfield>pts</structfield></entry> + <entry>Stop playback at this <structfield>pts</structfield> or immediately +if the playback is already past that timestamp. Leave to 0 if you want to stop after the +last frame was decoded. + </entry> + </row> + <row> + <entry></entry> + <entry>struct</entry> + <entry><structfield>raw</structfield></entry> + <entry></entry> + <entry></entry> + </row> + <row> + <entry></entry> + <entry></entry> + <entry>__u32</entry> + <entry><structfield>data</structfield>[16]</entry> + <entry>Reserved for future extensions. Drivers and +applications must set the array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="decoder-cmds"> + <title>Decoder Commands</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>V4L2_DEC_CMD_START</constant></entry> + <entry>0</entry> + <entry>Start the decoder. When the decoder is already +running or paused, this command will just change the playback speed. +That means that calling <constant>V4L2_DEC_CMD_START</constant> when +the decoder was paused will <emphasis>not</emphasis> resume the decoder. +You have to explicitly call <constant>V4L2_DEC_CMD_RESUME</constant> for that. +This command has one flag: +<constant>V4L2_DEC_CMD_START_MUTE_AUDIO</constant>. If set, then audio will +be muted when playing back at a non-standard speed. + </entry> + </row> + <row> + <entry><constant>V4L2_DEC_CMD_STOP</constant></entry> + <entry>1</entry> + <entry>Stop the decoder. When the decoder is already stopped, +this command does nothing. This command has two flags: +if <constant>V4L2_DEC_CMD_STOP_TO_BLACK</constant> is set, then the decoder will +set the picture to black after it stopped decoding. Otherwise the last image will +repeat. If <constant>V4L2_DEC_CMD_STOP_IMMEDIATELY</constant> is set, then the decoder +stops immediately (ignoring the <structfield>pts</structfield> value), otherwise it +will keep decoding until timestamp >= pts or until the last of the pending data from +its internal buffers was decoded. +</entry> + </row> + <row> + <entry><constant>V4L2_DEC_CMD_PAUSE</constant></entry> + <entry>2</entry> + <entry>Pause the decoder. When the decoder has not been +started yet, the driver will return an &EPERM;. When the decoder is +already paused, this command does nothing. This command has one flag: +if <constant>V4L2_DEC_CMD_PAUSE_TO_BLACK</constant> is set, then set the +decoder output to black when paused. +</entry> + </row> + <row> + <entry><constant>V4L2_DEC_CMD_RESUME</constant></entry> + <entry>3</entry> + <entry>Resume decoding after a PAUSE command. When the +decoder has not been started yet, the driver will return an &EPERM;. +When the decoder is already running, this command does nothing. No +flags are defined for this command.</entry> + </row> + </tbody> + </tgroup> + </table> + + </refsect1> + + <refsect1> + &return-value; + + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The <structfield>cmd</structfield> field is invalid.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EPERM</errorcode></term> + <listitem> + <para>The application sent a PAUSE or RESUME command when +the decoder was not running.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml index af7f3f2a36dd..f431b3ba79bd 100644 --- a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml @@ -74,15 +74,16 @@ only used by the STOP command and contains one bit: If the encoding will continue until the end of the current <wordasword>Group Of Pictures</wordasword>, otherwise it will stop immediately.</para> - <para>A <function>read</function>() call sends a START command to -the encoder if it has not been started yet. After a STOP command, + <para>A <function>read</function>() or &VIDIOC-STREAMON; call sends an implicit +START command to the encoder if it has not been started yet. After a STOP command, <function>read</function>() calls will read the remaining data buffered by the driver. When the buffer is empty, <function>read</function>() will return zero and the next <function>read</function>() call will restart the encoder.</para> - <para>A <function>close</function>() call sends an immediate STOP -to the encoder, and all buffered data is discarded.</para> + <para>A <function>close</function>() or &VIDIOC-STREAMOFF; call of a streaming +file descriptor sends an implicit immediate STOP to the encoder, and all buffered +data is discarded.</para> <para>These ioctls are optional, not all drivers may support them. They were introduced in Linux 2.6.21.</para> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml index 01ea24b84385..48748499c097 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml @@ -57,6 +57,11 @@ <refsect1> <title>Description</title> + <para>These ioctls are <emphasis role="bold">deprecated</emphasis>. + New drivers and applications should use <link linkend="jpeg-controls"> + JPEG class controls</link> for image quality and JPEG markers control. + </para> + <para>[to do]</para> <para>Ronald Bultje elaborates:</para> @@ -86,7 +91,10 @@ to add them.</para> <row> <entry>int</entry> <entry><structfield>quality</structfield></entry> - <entry></entry> + <entry>Deprecated. If <link linkend="jpeg-quality-control"><constant> + V4L2_CID_JPEG_IMAGE_QUALITY</constant></link> control is exposed by + a driver applications should use it instead and ignore this field. + </entry> </row> <row> <entry>int</entry> @@ -116,7 +124,11 @@ to add them.</para> <row> <entry>__u32</entry> <entry><structfield>jpeg_markers</structfield></entry> - <entry>See <xref linkend="jpeg-markers" />.</entry> + <entry>See <xref linkend="jpeg-markers"/>. Deprecated. + If <link linkend="jpeg-active-marker-control"><constant> + V4L2_CID_JPEG_ACTIVE_MARKER</constant></link> control + is exposed by a driver applications should use it instead + and ignore this field.</entry> </row> </tbody> </tgroup> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index a9d36e0c090e..bb04eff75f45 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -58,43 +58,43 @@ <para>The ioctls are used to query and configure selection rectangles.</para> -<para> To query the cropping (composing) rectangle set <structfield> -&v4l2-selection;::type </structfield> to the respective buffer type. Do not -use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE +<para> To query the cropping (composing) rectangle set &v4l2-selection; +<structfield> type </structfield> field to the respective buffer type. +Do not use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE </constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is -setting <structfield> &v4l2-selection;::target </structfield> to value -<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> +setting the value of &v4l2-selection; <structfield>target</structfield> field +to <constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional -targets. Fields <structfield> &v4l2-selection;::flags </structfield> and -<structfield> &v4l2-selection;::reserved </structfield> are ignored and they -must be filled with zeros. The driver fills the rest of the structure or +targets. The <structfield>flags</structfield> and <structfield>reserved +</structfield> fields of &v4l2-selection; are ignored and they must be filled +with zeros. The driver fills the rest of the structure or returns &EINVAL; if incorrect buffer type or target was used. If cropping (composing) is not supported then the active rectangle is not mutable and it is -always equal to the bounds rectangle. Finally, structure <structfield> -&v4l2-selection;::r </structfield> is filled with the current cropping +always equal to the bounds rectangle. Finally, the &v4l2-rect; +<structfield>r</structfield> rectangle is filled with the current cropping (composing) coordinates. The coordinates are expressed in driver-dependent units. The only exception are rectangles for images in raw formats, whose coordinates are always expressed in pixels. </para> -<para> To change the cropping (composing) rectangle set <structfield> -&v4l2-selection;::type </structfield> to the respective buffer type. Do not +<para> To change the cropping (composing) rectangle set the &v4l2-selection; +<structfield>type</structfield> field to the respective buffer type. Do not use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE </constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is -setting <structfield> &v4l2-selection;::target </structfield> to value -<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> +setting the value of &v4l2-selection; <structfield>target</structfield> to +<constant>V4L2_SEL_TGT_CROP_ACTIVE</constant> (<constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional -targets. Set desired active area into the field <structfield> -&v4l2-selection;::r </structfield>. Field <structfield> -&v4l2-selection;::reserved </structfield> is ignored and must be filled with -zeros. The driver may adjust the rectangle coordinates. An application may -introduce constraints to control rounding behaviour. Set the field -<structfield> &v4l2-selection;::flags </structfield> to one of values: +targets. The &v4l2-rect; <structfield>r</structfield> rectangle need to be +set to the desired active area. Field &v4l2-selection; <structfield> reserved +</structfield> is ignored and must be filled with zeros. The driver may adjust +coordinates of the requested rectangle. An application may +introduce constraints to control rounding behaviour. The &v4l2-selection; +<structfield>flags</structfield> field must be set to one of the following: <itemizedlist> <listitem> @@ -129,7 +129,7 @@ and vertical offset and sizes are chosen according to following priority: <orderedlist> <listitem> - <para>Satisfy constraints from <structfield>&v4l2-selection;::flags</structfield>.</para> + <para>Satisfy constraints from &v4l2-selection; <structfield>flags</structfield>.</para> </listitem> <listitem> <para>Adjust width, height, left, and top to hardware limits and alignments.</para> @@ -145,7 +145,7 @@ and vertical offset and sizes are chosen according to following priority: </listitem> </orderedlist> -On success the field <structfield> &v4l2-selection;::r </structfield> contains +On success the &v4l2-rect; <structfield>r</structfield> field contains the adjusted rectangle. When the parameters are unsuitable the application may modify the cropping (composing) or image parameters and repeat the cycle until satisfactory parameters have been negotiated. If constraints flags have to be @@ -162,38 +162,38 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <tbody valign="top"> <row> <entry><constant>V4L2_SEL_TGT_CROP_ACTIVE</constant></entry> - <entry>0</entry> - <entry>area that is currently cropped by hardware</entry> + <entry>0x0000</entry> + <entry>The area that is currently cropped by hardware.</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry> - <entry>1</entry> - <entry>suggested cropping rectangle that covers the "whole picture"</entry> + <entry>0x0001</entry> + <entry>Suggested cropping rectangle that covers the "whole picture".</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry> - <entry>2</entry> - <entry>limits for the cropping rectangle</entry> + <entry>0x0002</entry> + <entry>Limits for the cropping rectangle.</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_COMPOSE_ACTIVE</constant></entry> - <entry>256</entry> - <entry>area to which data are composed by hardware</entry> + <entry>0x0100</entry> + <entry>The area to which data is composed by hardware.</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry> - <entry>257</entry> - <entry>suggested composing rectangle that covers the "whole picture"</entry> + <entry>0x0101</entry> + <entry>Suggested composing rectangle that covers the "whole picture".</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry> - <entry>258</entry> - <entry>limits for the composing rectangle</entry> + <entry>0x0102</entry> + <entry>Limits for the composing rectangle.</entry> </row> <row> <entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry> - <entry>259</entry> - <entry>the active area and all padding pixels that are inserted or modified by the hardware</entry> + <entry>0x0103</entry> + <entry>The active area and all padding pixels that are inserted or modified by hardware.</entry> </row> </tbody> </tgroup> @@ -209,12 +209,14 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <row> <entry><constant>V4L2_SEL_FLAG_GE</constant></entry> <entry>0x00000001</entry> - <entry>indicate that adjusted rectangle must contain a rectangle from <structfield>&v4l2-selection;::r</structfield></entry> + <entry>Indicates that the adjusted rectangle must contain the original + &v4l2-selection; <structfield>r</structfield> rectangle.</entry> </row> <row> <entry><constant>V4L2_SEL_FLAG_LE</constant></entry> <entry>0x00000002</entry> - <entry>indicate that adjusted rectangle must be inside a rectangle from <structfield>&v4l2-selection;::r</structfield></entry> + <entry>Indicates that the adjusted rectangle must be inside the original + &v4l2-rect; <structfield>r</structfield> rectangle.</entry> </row> </tbody> </tgroup> @@ -245,27 +247,29 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <row> <entry>__u32</entry> <entry><structfield>type</structfield></entry> - <entry>Type of the buffer (from &v4l2-buf-type;)</entry> + <entry>Type of the buffer (from &v4l2-buf-type;).</entry> </row> <row> <entry>__u32</entry> <entry><structfield>target</structfield></entry> - <entry>used to select between <link linkend="v4l2-sel-target"> cropping and composing rectangles </link></entry> + <entry>Used to select between <link linkend="v4l2-sel-target"> cropping + and composing rectangles</link>.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>flags</structfield></entry> - <entry>control over coordinates adjustments, refer to <link linkend="v4l2-sel-flags">selection flags</link></entry> + <entry>Flags controlling the selection rectangle adjustments, refer to + <link linkend="v4l2-sel-flags">selection flags</link>.</entry> </row> <row> <entry>&v4l2-rect;</entry> <entry><structfield>r</structfield></entry> - <entry>selection rectangle</entry> + <entry>The selection rectangle.</entry> </row> <row> <entry>__u32</entry> <entry><structfield>reserved[9]</structfield></entry> - <entry>Reserved fields for future use</entry> + <entry>Reserved fields for future use.</entry> </row> </tbody> </tgroup> @@ -278,24 +282,24 @@ exist no rectangle </emphasis> that satisfies the constraints.</para> <varlistentry> <term><errorcode>EINVAL</errorcode></term> <listitem> - <para>The buffer <structfield> &v4l2-selection;::type </structfield> -or <structfield> &v4l2-selection;::target </structfield> is not supported, or -the <structfield> &v4l2-selection;::flags </structfield> are invalid.</para> + <para>Given buffer type <structfield>type</structfield> or +the selection target <structfield>target</structfield> is not supported, +or the <structfield>flags</structfield> argument is not valid.</para> </listitem> </varlistentry> <varlistentry> <term><errorcode>ERANGE</errorcode></term> <listitem> - <para>it is not possible to adjust a rectangle <structfield> -&v4l2-selection;::r </structfield> that satisfies all contraints from -<structfield> &v4l2-selection;::flags </structfield>.</para> + <para>It is not possible to adjust &v4l2-rect; <structfield> +r</structfield> rectangle to satisfy all contraints given in the +<structfield>flags</structfield> argument.</para> </listitem> </varlistentry> <varlistentry> <term><errorcode>EBUSY</errorcode></term> <listitem> - <para>it is not possible to apply change of selection rectangle at the moment. -Usually because streaming is in progress.</para> + <para>It is not possible to apply change of the selection rectangle +at the moment. Usually because streaming is in progress.</para> </listitem> </varlistentry> </variablelist> diff --git a/Documentation/DocBook/media/v4l/vidioc-querycap.xml b/Documentation/DocBook/media/v4l/vidioc-querycap.xml index e3664d6f2de4..4643505cd4ca 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querycap.xml @@ -124,12 +124,35 @@ printf ("Version: %u.%u.%u\n", <row> <entry>__u32</entry> <entry><structfield>capabilities</structfield></entry> - <entry>Device capabilities, see <xref - linkend="device-capabilities" />.</entry> + <entry>Available capabilities of the physical device as a whole, see <xref + linkend="device-capabilities" />. The same physical device can export + multiple devices in /dev (e.g. /dev/videoX, /dev/vbiY and /dev/radioZ). + The <structfield>capabilities</structfield> field should contain a union + of all capabilities available around the several V4L2 devices exported + to userspace. + For all those devices the <structfield>capabilities</structfield> field + returns the same set of capabilities. This allows applications to open + just one of the devices (typically the video device) and discover whether + video, vbi and/or radio are also supported. + </entry> </row> <row> <entry>__u32</entry> - <entry><structfield>reserved</structfield>[4]</entry> + <entry><structfield>device_caps</structfield></entry> + <entry>Device capabilities of the opened device, see <xref + linkend="device-capabilities" />. Should contain the available capabilities + of that specific device node. So, for example, <structfield>device_caps</structfield> + of a radio device will only contain radio related capabilities and + no video or vbi capabilities. This field is only set if the <structfield>capabilities</structfield> + field contains the <constant>V4L2_CAP_DEVICE_CAPS</constant> capability. + Only the <structfield>capabilities</structfield> field can have the + <constant>V4L2_CAP_DEVICE_CAPS</constant> capability, <structfield>device_caps</structfield> + will never set <constant>V4L2_CAP_DEVICE_CAPS</constant>. + </entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[3]</entry> <entry>Reserved for future extensions. Drivers must set this array to zero.</entry> </row> @@ -276,6 +299,13 @@ linkend="async">asynchronous</link> I/O methods.</entry> <entry>The device supports the <link linkend="mmap">streaming</link> I/O method.</entry> </row> + <row> + <entry><constant>V4L2_CAP_DEVICE_CAPS</constant></entry> + <entry>0x80000000</entry> + <entry>The driver fills the <structfield>device_caps</structfield> + field. This capability can only appear in the <structfield>capabilities</structfield> + field and never in the <structfield>device_caps</structfield> field.</entry> + </row> </tbody> </tgroup> </table> diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index e013da845b11..18b1a8266f7c 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -96,8 +96,8 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry> <row> <entry>__u32</entry> <entry><structfield>reserved</structfield>[7]</entry> - <entry>Reserved for future extensions. Drivers and - applications must set the array to zero.</entry> + <entry>Reserved for future extensions. Applications + must set the array to zero.</entry> </row> </tbody> </tgroup> @@ -112,7 +112,7 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry> <term><errorcode>EINVAL</errorcode></term> <listitem> <para>The <structfield>tuner</structfield> index is out of -bounds or the value in the <structfield>type</structfield> field is +bounds, the wrap_around value is not supported or the value in the <structfield>type</structfield> field is wrong.</para> </listitem> </varlistentry> diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt new file mode 100644 index 000000000000..f5e4caafab7d --- /dev/null +++ b/Documentation/backlight/lp855x-driver.txt @@ -0,0 +1,78 @@ +Kernel driver lp855x +==================== + +Backlight driver for LP855x ICs + +Supported chips: + Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556 + +Author: Milo(Woogyom) Kim <milo.kim@ti.com> + +Description +----------- + +* Brightness control + +Brightness can be controlled by the pwm input or the i2c command. +The lp855x driver supports both cases. + +* Device attributes + +1) bl_ctl_mode +Backlight control mode. +Value : pwm based or register based + +2) chip_id +The lp855x chip id. +Value : lp8550/lp8551/lp8552/lp8553/lp8556 + +Platform data for lp855x +------------------------ + +For supporting platform specific data, the lp855x platform data can be used. + +* name : Backlight driver name. If it is not defined, default name is set. +* mode : Brightness control mode. PWM or register based. +* device_control : Value of DEVICE CONTROL register. +* initial_brightness : Initial value of backlight brightness. +* pwm_data : Platform specific pwm generation functions. + Only valid when brightness is pwm input mode. + Functions should be implemented by PWM driver. + - pwm_set_intensity() : set duty of PWM + - pwm_get_intensity() : get current duty of PWM +* load_new_rom_data : + 0 : use default configuration data + 1 : update values of eeprom or eprom registers on loading driver +* size_program : Total size of lp855x_rom_data. +* rom_data : List of new eeprom/eprom registers. + +example 1) lp8552 platform data : i2c register mode with new eeprom data + +#define EEPROM_A5_ADDR 0xA5 +#define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */ + +static struct lp855x_rom_data lp8552_eeprom_arr[] = { + {EEPROM_A5_ADDR, EEPROM_A5_VAL}, +}; + +static struct lp855x_platform_data lp8552_pdata = { + .name = "lcd-bl", + .mode = REGISTER_BASED, + .device_control = I2C_CONFIG(LP8552), + .initial_brightness = INITIAL_BRT, + .load_new_rom_data = 1, + .size_program = ARRAY_SIZE(lp8552_eeprom_arr), + .rom_data = lp8552_eeprom_arr, +}; + +example 2) lp8556 platform data : pwm input mode with default rom data + +static struct lp855x_platform_data lp8556_pdata = { + .mode = PWM_BASED, + .device_control = PWM_CONFIG(LP8556), + .initial_brightness = INITIAL_BRT, + .pwm_data = { + .pwm_set_intensity = platform_pwm_set_intensity, + .pwm_get_intensity = platform_pwm_get_intensity, + }, +}; diff --git a/Documentation/clk.txt b/Documentation/clk.txt new file mode 100644 index 000000000000..1943fae014fd --- /dev/null +++ b/Documentation/clk.txt @@ -0,0 +1,233 @@ + The Common Clk Framework + Mike Turquette <mturquette@ti.com> + +This document endeavours to explain the common clk framework details, +and how to port a platform over to this framework. It is not yet a +detailed explanation of the clock api in include/linux/clk.h, but +perhaps someday it will include that information. + + Part 1 - introduction and interface split + +The common clk framework is an interface to control the clock nodes +available on various devices today. This may come in the form of clock +gating, rate adjustment, muxing or other operations. This framework is +enabled with the CONFIG_COMMON_CLK option. + +The interface itself is divided into two halves, each shielded from the +details of its counterpart. First is the common definition of struct +clk which unifies the framework-level accounting and infrastructure that +has traditionally been duplicated across a variety of platforms. Second +is a common implementation of the clk.h api, defined in +drivers/clk/clk.c. Finally there is struct clk_ops, whose operations +are invoked by the clk api implementation. + +The second half of the interface is comprised of the hardware-specific +callbacks registered with struct clk_ops and the corresponding +hardware-specific structures needed to model a particular clock. For +the remainder of this document any reference to a callback in struct +clk_ops, such as .enable or .set_rate, implies the hardware-specific +implementation of that code. Likewise, references to struct clk_foo +serve as a convenient shorthand for the implementation of the +hardware-specific bits for the hypothetical "foo" hardware. + +Tying the two halves of this interface together is struct clk_hw, which +is defined in struct clk_foo and pointed to within struct clk. This +allows easy for navigation between the two discrete halves of the common +clock interface. + + Part 2 - common data structures and api + +Below is the common struct clk definition from +include/linux/clk-private.h, modified for brevity: + + struct clk { + const char *name; + const struct clk_ops *ops; + struct clk_hw *hw; + char **parent_names; + struct clk **parents; + struct clk *parent; + struct hlist_head children; + struct hlist_node child_node; + ... + }; + +The members above make up the core of the clk tree topology. The clk +api itself defines several driver-facing functions which operate on +struct clk. That api is documented in include/linux/clk.h. + +Platforms and devices utilizing the common struct clk use the struct +clk_ops pointer in struct clk to perform the hardware-specific parts of +the operations defined in clk.h: + + struct clk_ops { + int (*prepare)(struct clk_hw *hw); + void (*unprepare)(struct clk_hw *hw); + int (*enable)(struct clk_hw *hw); + void (*disable)(struct clk_hw *hw); + int (*is_enabled)(struct clk_hw *hw); + unsigned long (*recalc_rate)(struct clk_hw *hw, + unsigned long parent_rate); + long (*round_rate)(struct clk_hw *hw, unsigned long, + unsigned long *); + int (*set_parent)(struct clk_hw *hw, u8 index); + u8 (*get_parent)(struct clk_hw *hw); + int (*set_rate)(struct clk_hw *hw, unsigned long); + void (*init)(struct clk_hw *hw); + }; + + Part 3 - hardware clk implementations + +The strength of the common struct clk comes from its .ops and .hw pointers +which abstract the details of struct clk from the hardware-specific bits, and +vice versa. To illustrate consider the simple gateable clk implementation in +drivers/clk/clk-gate.c: + +struct clk_gate { + struct clk_hw hw; + void __iomem *reg; + u8 bit_idx; + ... +}; + +struct clk_gate contains struct clk_hw hw as well as hardware-specific +knowledge about which register and bit controls this clk's gating. +Nothing about clock topology or accounting, such as enable_count or +notifier_count, is needed here. That is all handled by the common +framework code and struct clk. + +Let's walk through enabling this clk from driver code: + + struct clk *clk; + clk = clk_get(NULL, "my_gateable_clk"); + + clk_prepare(clk); + clk_enable(clk); + +The call graph for clk_enable is very simple: + +clk_enable(clk); + clk->ops->enable(clk->hw); + [resolves to...] + clk_gate_enable(hw); + [resolves struct clk gate with to_clk_gate(hw)] + clk_gate_set_bit(gate); + +And the definition of clk_gate_set_bit: + +static void clk_gate_set_bit(struct clk_gate *gate) +{ + u32 reg; + + reg = __raw_readl(gate->reg); + reg |= BIT(gate->bit_idx); + writel(reg, gate->reg); +} + +Note that to_clk_gate is defined as: + +#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, clk) + +This pattern of abstraction is used for every clock hardware +representation. + + Part 4 - supporting your own clk hardware + +When implementing support for a new type of clock it only necessary to +include the following header: + +#include <linux/clk-provider.h> + +include/linux/clk.h is included within that header and clk-private.h +must never be included from the code which implements the operations for +a clock. More on that below in Part 5. + +To construct a clk hardware structure for your platform you must define +the following: + +struct clk_foo { + struct clk_hw hw; + ... hardware specific data goes here ... +}; + +To take advantage of your data you'll need to support valid operations +for your clk: + +struct clk_ops clk_foo_ops { + .enable = &clk_foo_enable; + .disable = &clk_foo_disable; +}; + +Implement the above functions using container_of: + +#define to_clk_foo(_hw) container_of(_hw, struct clk_foo, hw) + +int clk_foo_enable(struct clk_hw *hw) +{ + struct clk_foo *foo; + + foo = to_clk_foo(hw); + + ... perform magic on foo ... + + return 0; +}; + +Below is a matrix detailing which clk_ops are mandatory based upon the +hardware capbilities of that clock. A cell marked as "y" means +mandatory, a cell marked as "n" implies that either including that +callback is invalid or otherwise uneccesary. Empty cells are either +optional or must be evaluated on a case-by-case basis. + + clock hardware characteristics + ----------------------------------------------------------- + | gate | change rate | single parent | multiplexer | root | + |------|-------------|---------------|-------------|------| +.prepare | | | | | | +.unprepare | | | | | | + | | | | | | +.enable | y | | | | | +.disable | y | | | | | +.is_enabled | y | | | | | + | | | | | | +.recalc_rate | | y | | | | +.round_rate | | y | | | | +.set_rate | | y | | | | + | | | | | | +.set_parent | | | n | y | n | +.get_parent | | | n | y | n | + | | | | | | +.init | | | | | | + ----------------------------------------------------------- + +Finally, register your clock at run-time with a hardware-specific +registration function. This function simply populates struct clk_foo's +data and then passes the common struct clk parameters to the framework +with a call to: + +clk_register(...) + +See the basic clock types in drivers/clk/clk-*.c for examples. + + Part 5 - static initialization of clock data + +For platforms with many clocks (often numbering into the hundreds) it +may be desirable to statically initialize some clock data. This +presents a problem since the definition of struct clk should be hidden +from everyone except for the clock core in drivers/clk/clk.c. + +To get around this problem struct clk's definition is exposed in +include/linux/clk-private.h along with some macros for more easily +initializing instances of the basic clock types. These clocks must +still be initialized with the common clock framework via a call to +__clk_init. + +clk-private.h must NEVER be included by code which implements struct +clk_ops callbacks, nor must it be included by any logic which pokes +around inside of struct clk at run-time. To do so is a layering +violation. + +To better enforce this policy, always follow this simple rule: any +statically initialized clock data MUST be defined in a separate file +from the logic that implements its ops. Basically separate the logic +from the data and all is well. diff --git a/Documentation/crc32.txt b/Documentation/crc32.txt new file mode 100644 index 000000000000..a08a7dd9d625 --- /dev/null +++ b/Documentation/crc32.txt @@ -0,0 +1,182 @@ +A brief CRC tutorial. + +A CRC is a long-division remainder. You add the CRC to the message, +and the whole thing (message+CRC) is a multiple of the given +CRC polynomial. To check the CRC, you can either check that the +CRC matches the recomputed value, *or* you can check that the +remainder computed on the message+CRC is 0. This latter approach +is used by a lot of hardware implementations, and is why so many +protocols put the end-of-frame flag after the CRC. + +It's actually the same long division you learned in school, except that +- We're working in binary, so the digits are only 0 and 1, and +- When dividing polynomials, there are no carries. Rather than add and + subtract, we just xor. Thus, we tend to get a bit sloppy about + the difference between adding and subtracting. + +Like all division, the remainder is always smaller than the divisor. +To produce a 32-bit CRC, the divisor is actually a 33-bit CRC polynomial. +Since it's 33 bits long, bit 32 is always going to be set, so usually the +CRC is written in hex with the most significant bit omitted. (If you're +familiar with the IEEE 754 floating-point format, it's the same idea.) + +Note that a CRC is computed over a string of *bits*, so you have +to decide on the endianness of the bits within each byte. To get +the best error-detecting properties, this should correspond to the +order they're actually sent. For example, standard RS-232 serial is +little-endian; the most significant bit (sometimes used for parity) +is sent last. And when appending a CRC word to a message, you should +do it in the right order, matching the endianness. + +Just like with ordinary division, you proceed one digit (bit) at a time. +Each step of the division you take one more digit (bit) of the dividend +and append it to the current remainder. Then you figure out the +appropriate multiple of the divisor to subtract to being the remainder +back into range. In binary, this is easy - it has to be either 0 or 1, +and to make the XOR cancel, it's just a copy of bit 32 of the remainder. + +When computing a CRC, we don't care about the quotient, so we can +throw the quotient bit away, but subtract the appropriate multiple of +the polynomial from the remainder and we're back to where we started, +ready to process the next bit. + +A big-endian CRC written this way would be coded like: +for (i = 0; i < input_bits; i++) { + multiple = remainder & 0x80000000 ? CRCPOLY : 0; + remainder = (remainder << 1 | next_input_bit()) ^ multiple; +} + +Notice how, to get at bit 32 of the shifted remainder, we look +at bit 31 of the remainder *before* shifting it. + +But also notice how the next_input_bit() bits we're shifting into +the remainder don't actually affect any decision-making until +32 bits later. Thus, the first 32 cycles of this are pretty boring. +Also, to add the CRC to a message, we need a 32-bit-long hole for it at +the end, so we have to add 32 extra cycles shifting in zeros at the +end of every message, + +These details lead to a standard trick: rearrange merging in the +next_input_bit() until the moment it's needed. Then the first 32 cycles +can be precomputed, and merging in the final 32 zero bits to make room +for the CRC can be skipped entirely. This changes the code to: + +for (i = 0; i < input_bits; i++) { + remainder ^= next_input_bit() << 31; + multiple = (remainder & 0x80000000) ? CRCPOLY : 0; + remainder = (remainder << 1) ^ multiple; +} + +With this optimization, the little-endian code is particularly simple: +for (i = 0; i < input_bits; i++) { + remainder ^= next_input_bit(); + multiple = (remainder & 1) ? CRCPOLY : 0; + remainder = (remainder >> 1) ^ multiple; +} + +The most significant coefficient of the remainder polynomial is stored +in the least significant bit of the binary "remainder" variable. +The other details of endianness have been hidden in CRCPOLY (which must +be bit-reversed) and next_input_bit(). + +As long as next_input_bit is returning the bits in a sensible order, we don't +*have* to wait until the last possible moment to merge in additional bits. +We can do it 8 bits at a time rather than 1 bit at a time: +for (i = 0; i < input_bytes; i++) { + remainder ^= next_input_byte() << 24; + for (j = 0; j < 8; j++) { + multiple = (remainder & 0x80000000) ? CRCPOLY : 0; + remainder = (remainder << 1) ^ multiple; + } +} + +Or in little-endian: +for (i = 0; i < input_bytes; i++) { + remainder ^= next_input_byte(); + for (j = 0; j < 8; j++) { + multiple = (remainder & 1) ? CRCPOLY : 0; + remainder = (remainder >> 1) ^ multiple; + } +} + +If the input is a multiple of 32 bits, you can even XOR in a 32-bit +word at a time and increase the inner loop count to 32. + +You can also mix and match the two loop styles, for example doing the +bulk of a message byte-at-a-time and adding bit-at-a-time processing +for any fractional bytes at the end. + +To reduce the number of conditional branches, software commonly uses +the byte-at-a-time table method, popularized by Dilip V. Sarwate, +"Computation of Cyclic Redundancy Checks via Table Look-Up", Comm. ACM +v.31 no.8 (August 1998) p. 1008-1013. + +Here, rather than just shifting one bit of the remainder to decide +in the correct multiple to subtract, we can shift a byte at a time. +This produces a 40-bit (rather than a 33-bit) intermediate remainder, +and the correct multiple of the polynomial to subtract is found using +a 256-entry lookup table indexed by the high 8 bits. + +(The table entries are simply the CRC-32 of the given one-byte messages.) + +When space is more constrained, smaller tables can be used, e.g. two +4-bit shifts followed by a lookup in a 16-entry table. + +It is not practical to process much more than 8 bits at a time using this +technique, because tables larger than 256 entries use too much memory and, +more importantly, too much of the L1 cache. + +To get higher software performance, a "slicing" technique can be used. +See "High Octane CRC Generation with the Intel Slicing-by-8 Algorithm", +ftp://download.intel.com/technology/comms/perfnet/download/slicing-by-8.pdf + +This does not change the number of table lookups, but does increase +the parallelism. With the classic Sarwate algorithm, each table lookup +must be completed before the index of the next can be computed. + +A "slicing by 2" technique would shift the remainder 16 bits at a time, +producing a 48-bit intermediate remainder. Rather than doing a single +lookup in a 65536-entry table, the two high bytes are looked up in +two different 256-entry tables. Each contains the remainder required +to cancel out the corresponding byte. The tables are different because the +polynomials to cancel are different. One has non-zero coefficients from +x^32 to x^39, while the other goes from x^40 to x^47. + +Since modern processors can handle many parallel memory operations, this +takes barely longer than a single table look-up and thus performs almost +twice as fast as the basic Sarwate algorithm. + +This can be extended to "slicing by 4" using 4 256-entry tables. +Each step, 32 bits of data is fetched, XORed with the CRC, and the result +broken into bytes and looked up in the tables. Because the 32-bit shift +leaves the low-order bits of the intermediate remainder zero, the +final CRC is simply the XOR of the 4 table look-ups. + +But this still enforces sequential execution: a second group of table +look-ups cannot begin until the previous groups 4 table look-ups have all +been completed. Thus, the processor's load/store unit is sometimes idle. + +To make maximum use of the processor, "slicing by 8" performs 8 look-ups +in parallel. Each step, the 32-bit CRC is shifted 64 bits and XORed +with 64 bits of input data. What is important to note is that 4 of +those 8 bytes are simply copies of the input data; they do not depend +on the previous CRC at all. Thus, those 4 table look-ups may commence +immediately, without waiting for the previous loop iteration. + +By always having 4 loads in flight, a modern superscalar processor can +be kept busy and make full use of its L1 cache. + +Two more details about CRC implementation in the real world: + +Normally, appending zero bits to a message which is already a multiple +of a polynomial produces a larger multiple of that polynomial. Thus, +a basic CRC will not detect appended zero bits (or bytes). To enable +a CRC to detect this condition, it's common to invert the CRC before +appending it. This makes the remainder of the message+crc come out not +as zero, but some fixed non-zero value. (The CRC of the inversion +pattern, 0xffffffff.) + +The same problem applies to zero bits prepended to the message, and a +similar solution is used. Instead of starting the CRC computation with +a remainder of 0, an initial remainder of all ones is used. As long as +you start the same way on decoding, it doesn't make a difference. diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt new file mode 100644 index 000000000000..aabca4f83402 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt @@ -0,0 +1,38 @@ +* Advanced Interrupt Controller (AIC) + +Required properties: +- compatible: Should be "atmel,<chip>-aic" +- interrupt-controller: Identifies the node as an interrupt controller. +- interrupt-parent: For single AIC system, it is an empty property. +- #interrupt-cells: The number of cells to define the interrupts. It sould be 2. + The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + Default flag for internal sources should be set to 4 (active high). +- reg: Should contain AIC registers location and length + +Examples: + /* + * AIC + */ + aic: interrupt-controller@fffff000 { + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + interrupt-parent; + #interrupt-cells = <2>; + reg = <0xfffff000 0x200>; + }; + + /* + * An interrupt generating device that is wired to an AIC. + */ + dma: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt new file mode 100644 index 000000000000..ecc81e368715 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -0,0 +1,92 @@ +Atmel AT91 device tree bindings. +================================ + +PIT Timer required properties: +- compatible: Should be "atmel,at91sam9260-pit" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt for the PIT which is the IRQ line + shared across all System Controller members. + +TC/TCLIB Timer required properties: +- compatible: Should be "atmel,<chip>-pit". + <chip> can be "at91rm9200" or "at91sam9x5" +- reg: Should contain registers location and length +- interrupts: Should contain all interrupts for the TC block + Note that you can specify several interrupt cells if the TC + block has one interrupt per channel. + +Examples: + +One interrupt per TC block: + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + }; + +One interrupt per TC channel in a TC block: + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffdc000 0x100>; + interrupts = <26 4 27 4 28 4>; + }; + +RSTC Reset Controller required properties: +- compatible: Should be "atmel,<chip>-rstc". + <chip> can be "at91sam9260" or "at91sam9g45" +- reg: Should contain registers location and length + +Example: + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + +RAMC SDRAM/DDR Controller required properties: +- compatible: Should be "atmel,at91sam9260-sdramc", + "atmel,at91sam9g45-ddramc", +- reg: Should contain registers location and length + For at91sam9263 and at91sam9g45 you must specify 2 entries. + +Examples: + + ramc0: ramc@ffffe800 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe800 0x200>; + }; + + ramc0: ramc@ffffe400 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe400 0x200 + 0xffffe600 0x200>; + }; + +SHDWC Shutdown Controller + +required properties: +- compatible: Should be "atmel,<chip>-shdwc". + <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". +- reg: Should contain registers location and length + +optional properties: +- atmel,wakeup-mode: String, operation mode of the wakeup mode. + Supported values are: "none", "high", "low", "any". +- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf). + +optional at91sam9260 properties: +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. + +optional at91sam9rl properties: +- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. + +optional at91sam9x5 properties: +- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. + +Example: + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt new file mode 100644 index 000000000000..389bed5056e8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt @@ -0,0 +1,11 @@ +* Power Management Controller (PMC) + +Required properties: +- compatible: Should be "atmel,at91rm9200-pmc" +- reg: Should contain PMC registers location and length + +Examples: + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 54bdddadf1cf..bfbc771a65f8 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -28,3 +28,25 @@ Required root node properties: i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; + +Generic i.MX boards +------------------- + +No iomux setup is done for these boards, so this must have been configured +by the bootloader for boards to work with the generic bindings. + +i.MX27 generic board +Required root node properties: + - compatible = "fsl,imx27"; + +i.MX51 generic board +Required root node properties: + - compatible = "fsl,imx51"; + +i.MX53 generic board +Required root node properties: + - compatible = "fsl,imx53"; + +i.MX6q generic board +Required root node properties: + - compatible = "fsl,imx6q"; diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl.txt new file mode 100644 index 000000000000..d8de933e9d81 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl.txt @@ -0,0 +1,6 @@ +Marvell Platforms Device Tree Bindings +---------------------------------------------------- + +PXA168 Aspenite Board +Required root node properties: + - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; diff --git a/Documentation/devicetree/bindings/arm/omap/intc.txt b/Documentation/devicetree/bindings/arm/omap/intc.txt new file mode 100644 index 000000000000..f2583e6ec060 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/intc.txt @@ -0,0 +1,27 @@ +* OMAP Interrupt Controller + +OMAP2/3 are using a TI interrupt controller that can support several +configurable number of interrupts. + +Main node required properties: + +- compatible : should be: + "ti,omap2-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a <u32> and the value shall be 1. + + The cell contains the interrupt number in the range [0-128]. +- ti,intc-size: Number of interrupts handled by the interrupt controller. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller@1 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x48200000 0x1000>; + }; + diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt new file mode 100644 index 000000000000..f8e54f092328 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -0,0 +1,8 @@ +ST SPEAr Platforms Device Tree Bindings +--------------------------------------- + +Boards with the ST SPEAr600 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear600"; diff --git a/Documentation/devicetree/bindings/arm/tegra/emc.txt b/Documentation/devicetree/bindings/arm/tegra/emc.txt new file mode 100644 index 000000000000..09335f8eee00 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/emc.txt @@ -0,0 +1,100 @@ +Embedded Memory Controller + +Properties: +- name : Should be emc +- #address-cells : Should be 1 +- #size-cells : Should be 0 +- compatible : Should contain "nvidia,tegra20-emc". +- reg : Offset and length of the register set for the device +- nvidia,use-ram-code : If present, the sub-nodes will be addressed + and chosen using the ramcode board selector. If omitted, only one + set of tables can be present and said tables will be used + irrespective of ram-code configuration. + +Child device nodes describe the memory settings for different configurations and clock rates. + +Example: + + emc@7000f400 { + #address-cells = < 1 >; + #size-cells = < 0 >; + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f4000 0x200>; + } + + +Embedded Memory Controller ram-code table + +If the emc node has the nvidia,use-ram-code property present, then the +next level of nodes below the emc table are used to specify which settings +apply for which ram-code settings. + +If the emc node lacks the nvidia,use-ram-code property, this level is omitted +and the tables are stored directly under the emc node (see below). + +Properties: + +- name : Should be emc-tables +- nvidia,ram-code : the binary representation of the ram-code board strappings + for which this node (and children) are valid. + + + +Embedded Memory Controller configuration table + +This is a table containing the EMC register settings for the various +operating speeds of the memory controller. They are always located as +subnodes of the emc controller node. + +There are two ways of specifying which tables to use: + +* The simplest is if there is just one set of tables in the device tree, + and they will always be used (based on which frequency is used). + This is the preferred method, especially when firmware can fill in + this information based on the specific system information and just + pass it on to the kernel. + +* The slightly more complex one is when more than one memory configuration + might exist on the system. The Tegra20 platform handles this during + early boot by selecting one out of possible 4 memory settings based + on a 2-pin "ram code" bootstrap setting on the board. The values of + these strappings can be read through a register in the SoC, and thus + used to select which tables to use. + +Properties: +- name : Should be emc-table +- compatible : Should contain "nvidia,tegra20-emc-table". +- reg : either an opaque enumerator to tell different tables apart, or + the valid frequency for which the table should be used (in kHz). +- clock-frequency : the clock frequency for the EMC at which this + table should be used (in kHz). +- nvidia,emc-registers : a 46 word array of EMC registers to be programmed + for operation at the 'clock-frequency' setting. + The order and contents of the registers are: + RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT, + WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR, + PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW, + TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE, + ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE, + ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0, + CFG_CLKTRIM_1, CFG_CLKTRIM_2 + + emc-table@166000 { + reg = <166000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 166000 >; + nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 >; + }; + + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 333000 >; + nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 >; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt new file mode 100644 index 000000000000..b5846e21cc2e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -0,0 +1,19 @@ +NVIDIA Tegra Power Management Controller (PMC) + +Properties: +- name : Should be pmc +- compatible : Should contain "nvidia,tegra<chip>-pmc". +- reg : Offset and length of the register set for the device +- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. + The PMU is an external Power Management Unit, whose interrupt output + signal is fed into the PMC. This signal is optionally inverted, and then + fed into the ARM GIC. The PMC is not involved in the detection or + handling of this interrupt signal, merely its inversion. + +Example: + +pmc@7000f400 { + compatible = "nvidia,tegra20-pmc"; + reg = <0x7000e400 0x400>; + nvidia,invert-interrupt; +}; diff --git a/Documentation/devicetree/bindings/arm/twd.txt b/Documentation/devicetree/bindings/arm/twd.txt new file mode 100644 index 000000000000..75b8610939fa --- /dev/null +++ b/Documentation/devicetree/bindings/arm/twd.txt @@ -0,0 +1,48 @@ +* ARM Timer Watchdog + +ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core +Timer-Watchdog (aka TWD), which provides both a per-cpu local timer +and watchdog. + +The TWD is usually attached to a GIC to deliver its two per-processor +interrupts. + +** Timer node required properties: + +- compatible : Should be one of: + "arm,cortex-a9-twd-timer" + "arm,cortex-a5-twd-timer" + "arm,arm11mp-twd-timer" + +- interrupts : One interrupt to each core + +- reg : Specify the base address and the size of the TWD timer + register window. + +Example: + + twd-timer@2c000600 { + compatible = "arm,arm11mp-twd-timer""; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf01>; + }; + +** Watchdog node properties: + +- compatible : Should be one of: + "arm,cortex-a9-twd-wdt" + "arm,cortex-a5-twd-wdt" + "arm,arm11mp-twd-wdt" + +- interrupts : One interrupt to each core + +- reg : Specify the base address and the size of the TWD watchdog + register window. + +Example: + + twd-watchdog@2c000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0x2c000620 0x20>; + interrupts = <1 14 0xf01>; + }; diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt new file mode 100644 index 000000000000..ec8b50cbb2e8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vexpress.txt @@ -0,0 +1,146 @@ +ARM Versatile Express boards family +----------------------------------- + +ARM's Versatile Express platform consists of a motherboard and one +or more daughterboards (tiles). The motherboard provides a set of +peripherals. Processor and RAM "live" on the tiles. + +The motherboard and each core tile should be described by a separate +Device Tree source file, with the tile's description including +the motherboard file using a /include/ directive. As the motherboard +can be initialized in one of two different configurations ("memory +maps"), care must be taken to include the correct one. + +Required properties in the root node: +- compatible value: + compatible = "arm,vexpress,<model>", "arm,vexpress"; + where <model> is the full tile model name (as used in the tile's + Technical Reference Manual), eg.: + - for Coretile Express A5x2 (V2P-CA5s): + compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; + - for Coretile Express A9x4 (V2P-CA9): + compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; + If a tile comes in several variants or can be used in more then one + configuration, the compatible value should be: + compatible = "arm,vexpress,<model>,<variant>", \ + "arm,vexpress,<model>", "arm,vexpress"; + eg: + - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1: + compatible = "arm,vexpress,v2p-ca15,tc1", \ + "arm,vexpress,v2p-ca15", "arm,vexpress"; + - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM: + compatible = "arm,vexpress,v2f-2xv6,ca7x3", \ + "arm,vexpress,v2f-2xv6", "arm,vexpress"; + +Optional properties in the root node: +- tile model name (use name from the tile's Technical Reference + Manual, eg. "V2P-CA5s") + model = "<model>"; +- tile's HBI number (unique ARM's board model ID, visible on the + PCB's silkscreen) in hexadecimal transcription: + arm,hbi = <0xhbi> + eg: + - for Coretile Express A5x2 (V2P-CA5s) HBI-0191: + arm,hbi = <0x191>; + - Coretile Express A9x4 (V2P-CA9) HBI-0225: + arm,hbi = <0x225>; + +Top-level standard "cpus" node is required. It must contain a node +with device_type = "cpu" property for every available core, eg.: + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + }; + }; + +The motherboard description file provides a single "motherboard" node +using 2 address cells corresponding to the Static Memory Bus used +between the motherboard and the tile. The first cell defines the Chip +Select (CS) line number, the second cell address offset within the CS. +All interrupt lines between the motherboard and the tile are active +high and are described using single cell. + +Optional properties of the "motherboard" node: +- motherboard's memory map variant: + arm,v2m-memory-map = "<name>"; + where name is one of: + - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also + referred to as "ARM Cortex-A Series memory map": + arm,v2m-memory-map = "rs1"; + When this property is missing, the motherboard is using the original + memory map (also known as the "Legacy memory map", primarily used + with the original CoreTile Express A9x4) with peripherals on CS7. + +Motherboard .dtsi files provide a set of labelled peripherals that +can be used to obtain required phandle in the tile's "aliases" node: +- UARTs, note that the numbers correspond to the physical connectors + on the motherboard's back panel: + v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3 +- I2C controllers: + v2m_i2c_dvi and v2m_i2c_pcie +- SP804 timers: + v2m_timer01 and v2m_timer23 + +Current Linux implementation requires a "arm,v2m_timer" alias +pointing at one of the motherboard's SP804 timers, if it is to be +used as the system timer. This alias should be defined in the +motherboard files. + +The tile description must define "ranges", "interrupt-map-mask" and +"interrupt-map" properties to translate the motherboard's address +and interrupt space into one used by the tile's processor. + +Abbreviated example: + +/dts-v1/; + +/ { + model = "V2P-CA5s"; + arm,hbi = <0x225>; + compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + }; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + motherboard { + /* CS0 is visible at 0x08000000 */ + ranges = <0 0 0x08000000 0x04000000>; + interrupt-map-mask = <0 0 63>; + /* Active high IRQ 0 is connected to GIC's SPI0 */ + interrupt-map = <0 0 0 &gic 0 0 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt new file mode 100644 index 000000000000..90fa7da525b8 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt @@ -0,0 +1,30 @@ +* NVIDIA Tegra APB DMA controller + +Required properties: +- compatible: Should be "nvidia,<chip>-apbdma" +- reg: Should contain DMA registers location and length. This shuld include + all of the per-channel registers. +- interrupts: Should contain all of the per-channel DMA interrupts. + +Examples: + +apbdma: dma@6000a000 { + compatible = "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1200>; + interrupts = < 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04 + 0 144 0x04 + 0 145 0x04 + 0 146 0x04 + 0 147 0x04 + 0 148 0x04 + 0 149 0x04 + 0 150 0x04 + 0 151 0x04 >; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt new file mode 100644 index 000000000000..66efc804806a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt @@ -0,0 +1,20 @@ +* Atmel GPIO controller (PIO) + +Required properties: +- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5. +- reg: Should contain GPIO controller registers location and length +- interrupts: Should be the port interrupt shared by all the pins. +- #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- gpio-controller: Marks the device node as a GPIO controller. + +Example: + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + }; + diff --git a/Documentation/devicetree/bindings/gpio/gpio_i2c.txt b/Documentation/devicetree/bindings/gpio/gpio_i2c.txt new file mode 100644 index 000000000000..4f8ec947c6bd --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio_i2c.txt @@ -0,0 +1,32 @@ +Device-Tree bindings for i2c gpio driver + +Required properties: + - compatible = "i2c-gpio"; + - gpios: sda and scl gpio + + +Optional properties: + - i2c-gpio,sda-open-drain: sda as open drain + - i2c-gpio,scl-open-drain: scl as open drain + - i2c-gpio,scl-output-only: scl as output only + - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) + - i2c-gpio,timeout-ms: timeout to get data + +Example nodes: + +i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + rv3029c2@56 { + compatible = "rv3029c2"; + reg = <0x56>; + }; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt index eb4b530d64e1..023c9526e5f8 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt @@ -1,8 +1,40 @@ -NVIDIA Tegra 2 GPIO controller +NVIDIA Tegra GPIO controller Required properties: -- compatible : "nvidia,tegra20-gpio" +- compatible : "nvidia,tegra<chip>-gpio" +- reg : Physical base address and length of the controller's registers. +- interrupts : The interrupt outputs from the controller. For Tegra20, + there should be 7 interrupts specified, and for Tegra30, there should + be 8 interrupts specified. - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) - gpio-controller : Marks the device node as a GPIO controller. +- #interrupt-cells : Should be 2. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. +- interrupt-controller : Marks the device node as an interrupt controller. + +Example: + +gpio: gpio@6000d000 { + compatible = "nvidia,tegra20-gpio"; + reg = < 0x6000d000 0x1000 >; + interrupts = < 0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 >; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; +}; diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt new file mode 100644 index 000000000000..1e34cfe5ebea --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -0,0 +1,23 @@ +* Marvell PXA GPIO controller + +Required properties: +- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" +- reg : Address and length of the register set for the device +- interrupts : Should be the port interrupt shared by all gpio pins, if +- interrupt-name : Should be the name of irq resource. + one number. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be one. It is the pin number. + +Example: + + gpio: gpio@d4019000 { + compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + reg = <0xd4019000 0x1000>; + interrupts = <49>, <17>, <18>; + interrupt-name = "gpio_mux", "gpio0", "gpio1"; + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt new file mode 100644 index 000000000000..071eb3caae91 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt @@ -0,0 +1,37 @@ +* I2C + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a + compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. + For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required + as shown in the example below. + +Recommended properties : + + - interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling + status register of i2c controller instead. + - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. + +Examples: + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + mrvl,i2c-fast-mode; + }; + + twsi2: i2c@d4025000 { + compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + reg = <0xd4025000 0x1000>; + interrupts = <58>; + }; + diff --git a/Documentation/devicetree/bindings/i2c/sirf-i2c.txt b/Documentation/devicetree/bindings/i2c/sirf-i2c.txt new file mode 100644 index 000000000000..7baf9e133fa8 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/sirf-i2c.txt @@ -0,0 +1,19 @@ +I2C for SiRFprimaII platforms + +Required properties : +- compatible : Must be "sirf,prima2-i2c" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt number to the cpu. + +Optional properties: +- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz. + The absence of the propoerty indicates the default frequency 100 kHz. + +Examples : + +i2c0: i2c@b00e0000 { + compatible = "sirf,prima2-i2c"; + reg = <0xb00e0000 0x10000>; + interrupts = <24>; +}; diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt new file mode 100644 index 000000000000..5903ecf6e895 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -0,0 +1,41 @@ +Atmel NAND flash + +Required properties: +- compatible : "atmel,at91rm9200-nand". +- reg : should specify localbus address and size used for the chip, + and if availlable the ECC. +- atmel,nand-addr-offset : offset for the address latch. +- atmel,nand-cmd-offset : offset for the command latch. +- #address-cells, #size-cells : Must be present if the device has sub-nodes + representing partitions. + +- gpios : specifies the gpio pins to control the NAND device. detect is an + optional gpio and may be set to 0 if not present. + +Optional properties: +- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default. + Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", + "soft_bch". +- nand-bus-width : 8 or 16 bus width if not present 8 +- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false + +Examples: +nand0: nand@40000000,0 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000 + 0xffffe800 0x200 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + nand-on-flash-bbt; + nand-ecc-mode = "soft"; + gpios = <&pioC 13 0 + &pioC 14 0 + 0 + >; + partition@0 { + ... + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt new file mode 100644 index 000000000000..03855c8c492a --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -0,0 +1,7 @@ +* MTD generic binding + +- nand-ecc-mode : String, operation mode of the NAND ecc mode. + Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", + "soft_bch". +- nand-bus-width : 8 or 16 bus width if not present 8 +- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt new file mode 100644 index 000000000000..0cda19ad4859 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt @@ -0,0 +1,17 @@ +* Marvell Real Time Clock controller + +Required properties: +- compatible: should be "mrvl,sa1100-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: Should be two. The first interrupt number is the rtc alarm + interrupt and the second interrupt number is the rtc hz interrupt. +- interrupt-names: Assign name of irq resource. + +Example: + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <5>, <6>; + interrupt-name = "rtc 1Hz", "rtc alarm"; + }; diff --git a/Documentation/devicetree/bindings/serial/mrvl-serial.txt b/Documentation/devicetree/bindings/serial/mrvl-serial.txt new file mode 100644 index 000000000000..d744340de887 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/mrvl-serial.txt @@ -0,0 +1,4 @@ +PXA UART controller + +Required properties: +- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart". diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt new file mode 100644 index 000000000000..60bd2150a3e6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -0,0 +1,49 @@ +Atmel SOC USB controllers + +OHCI + +Required properties: + - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers + used in host mode. + - num-ports: Number of ports. + - atmel,vbus-gpio: If present, specifies a gpio that needs to be + activated for the bus to be powered. + - atmel,oc-gpio: If present, specifies a gpio that needs to be + activated for the overcurrent detection. + +usb0: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x100000>; + interrupts = <20 4>; + num-ports = <2>; +}; + +EHCI + +Required properties: + - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers + used in host mode. + +usb1: ehci@00800000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00800000 0x100000>; + interrupts = <22 4>; +}; + +AT91 USB device controller + +Required properties: + - compatible: Should be "atmel,at91rm9200-udc" + - reg: Address and length of the register set for the device + - interrupts: Should contain macb interrupt + +Optional properties: + - atmel,vbus-gpio: If present, specifies a gpio that needs to be + activated for the bus to be powered. + +usb1: gadget@fffa4000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffa4000 0x4000>; + interrupts = <10 4>; + atmel,vbus-gpio = <&pioC 5 0>; +}; diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/tegra-usb.txt index 035d63d5646d..007005ddbe12 100644 --- a/Documentation/devicetree/bindings/usb/tegra-usb.txt +++ b/Documentation/devicetree/bindings/usb/tegra-usb.txt @@ -11,3 +11,16 @@ Required properties : - phy_type : Should be one of "ulpi" or "utmi". - nvidia,vbus-gpio : If present, specifies a gpio that needs to be activated for the bus to be powered. + +Optional properties: + - dr_mode : dual role mode. Indicates the working mode for + nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral", + or "otg". Default to "host" if not defined for backward compatibility. + host means this is a host controller + peripheral means it is device controller + otg means it can operate as either ("on the go") + - nvidia,has-legacy-mode : boolean indicates whether this controller can + operate in legacy mode (as APX 2500 / 2600). In legacy mode some + registers are accessed through the APB_MISC base address instead of + the USB controller. Since this is a legacy issue it probably does not + warrant a compatible string of its own. diff --git a/Documentation/dvb/cards.txt b/Documentation/dvb/cards.txt index cc09187a5db7..97709e9a3076 100644 --- a/Documentation/dvb/cards.txt +++ b/Documentation/dvb/cards.txt @@ -119,4 +119,5 @@ o Cards based on the Phillips saa7134 PCI bridge: - Compro Videomate DVB-T300 - Compro Videomate DVB-T200 - AVerMedia AVerTVHD MCE A180 + - KWorld PC150-U ATSC Hybrid diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt index 10b5f0411386..f4b720a14675 100644 --- a/Documentation/dvb/lmedm04.txt +++ b/Documentation/dvb/lmedm04.txt @@ -66,5 +66,16 @@ dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw For LME2510C dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw +--------------------------------------------------------------------- + +The m88rs2000 tuner driver can be found in windows/system32/drivers + +US2B0D.sys (dated 29 Jun 2010) + +dd if=US2B0D.sys ibs=1 skip=34432 count=3871 of=dvb-usb-lme2510c-rs2000.fw + +We need to modify id of rs2000 firmware or it will warm boot id 3344:1120. + +echo -ne \\xF0\\x22 | dd conv=notrunc bs=1 count=2 seek=266 of=dvb-usb-lme2510c-rs2000.fw Copy the firmware file(s) to /lib/firmware diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 249822cde82b..fdcc49fad8e1 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -334,8 +334,8 @@ Sdram memory scrubbing rate: Reading the file will return the actual scrubbing rate employed. - If configuration fails or memory scrubbing is not implemented, the value - of the attribute file will be -1. + If configuration fails or memory scrubbing is not implemented, accessing + that attribute will fail. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 4bfd982f8080..0cad4803ffac 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -513,20 +513,6 @@ Who: Bjorn Helgaas <bhelgaas@google.com> ---------------------------- -What: The CAP9 SoC family will be removed -When: 3.4 -Files: arch/arm/mach-at91/at91cap9.c - arch/arm/mach-at91/at91cap9_devices.c - arch/arm/mach-at91/include/mach/at91cap9.h - arch/arm/mach-at91/include/mach/at91cap9_matrix.h - arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h - arch/arm/mach-at91/board-cap9adk.c -Why: The code is not actively maintained and platforms are now hard to find. -Who: Nicolas Ferre <nicolas.ferre@atmel.com> - Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - ----------------------------- - What: Low Performance USB Block driver ("CONFIG_BLK_DEV_UB") When: 3.6 Why: This driver provides support for USB storage devices like "USB diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 8c10bf375c73..1b7f9acbcbbe 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -144,9 +144,6 @@ journal_async_commit Commit block can be written to disk without waiting mount the device. This will enable 'journal_checksum' internally. -journal=update Update the ext4 file system's journal to the current - format. - journal_dev=devnum When the external journal device's major/minor numbers have changed, this option allows the user to specify the new journal location. The journal device is @@ -356,11 +353,6 @@ nouid32 Disables 32-bit UIDs and GIDs. This is for interoperability with older kernels which only store and expect 16-bit values. -resize Allows to resize filesystem to the end of the last - existing block group, further resize has to be done - with resize2fs either online, or offline. It can be - used only with conjunction with remount. - block_validity This options allows to enables/disables the in-kernel noblock_validity facility for tracking filesystem metadata blocks within internal data structures. This allows multi- diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/filesystems/nfs/idmapper.txt index 120fd3cf7fd9..fe03d10bb79a 100644 --- a/Documentation/filesystems/nfs/idmapper.txt +++ b/Documentation/filesystems/nfs/idmapper.txt @@ -4,13 +4,21 @@ ID Mapper ========= Id mapper is used by NFS to translate user and group ids into names, and to translate user and group names into ids. Part of this translation involves -performing an upcall to userspace to request the information. Id mapper will -user request-key to perform this upcall and cache the result. The program -/usr/sbin/nfs.idmap should be called by request-key, and will perform the -translation and initialize a key with the resulting information. +performing an upcall to userspace to request the information. There are two +ways NFS could obtain this information: placing a call to /sbin/request-key +or by placing a call to the rpc.idmap daemon. + +NFS will attempt to call /sbin/request-key first. If this succeeds, the +result will be cached using the generic request-key cache. This call should +only fail if /etc/request-key.conf is not configured for the id_resolver key +type, see the "Configuring" section below if you wish to use the request-key +method. + +If the call to /sbin/request-key fails (if /etc/request-key.conf is not +configured with the id_resolver key type), then the idmapper will ask the +legacy rpc.idmap daemon for the id mapping. This result will be stored +in a custom NFS idmap cache. - NFS_USE_NEW_IDMAPPER must be selected when configuring the kernel to use this - feature. =========== Configuring diff --git a/Documentation/filesystems/nfs/pnfs.txt b/Documentation/filesystems/nfs/pnfs.txt index 983e14abe7e9..c7919c6e3bea 100644 --- a/Documentation/filesystems/nfs/pnfs.txt +++ b/Documentation/filesystems/nfs/pnfs.txt @@ -53,3 +53,57 @@ lseg maintains an extra reference corresponding to the NFS_LSEG_VALID bit which holds it in the pnfs_layout_hdr's list. When the final lseg is removed from the pnfs_layout_hdr's list, the NFS_LAYOUT_DESTROYED bit is set, preventing any new lsegs from being added. + +layout drivers +-------------- + +PNFS utilizes what is called layout drivers. The STD defines 3 basic +layout types: "files" "objects" and "blocks". For each of these types +there is a layout-driver with a common function-vectors table which +are called by the nfs-client pnfs-core to implement the different layout +types. + +Files-layout-driver code is in: fs/nfs/nfs4filelayout.c && nfs4filelayoutdev.c +Objects-layout-deriver code is in: fs/nfs/objlayout/.. directory +Blocks-layout-deriver code is in: fs/nfs/blocklayout/.. directory + +objects-layout setup +-------------------- + +As part of the full STD implementation the objlayoutdriver.ko needs, at times, +to automatically login to yet undiscovered iscsi/osd devices. For this the +driver makes up-calles to a user-mode script called *osd_login* + +The path_name of the script to use is by default: + /sbin/osd_login. +This name can be overridden by the Kernel module parameter: + objlayoutdriver.osd_login_prog + +If Kernel does not find the osd_login_prog path it will zero it out +and will not attempt farther logins. An admin can then write new value +to the objlayoutdriver.osd_login_prog Kernel parameter to re-enable it. + +The /sbin/osd_login is part of the nfs-utils package, and should usually +be installed on distributions that support this Kernel version. + +The API to the login script is as follows: + Usage: $0 -u <URI> -o <OSDNAME> -s <SYSTEMID> + Options: + -u target uri e.g. iscsi://<ip>:<port> + (allways exists) + (More protocols can be defined in the future. + The client does not interpret this string it is + passed unchanged as recieved from the Server) + -o osdname of the requested target OSD + (Might be empty) + (A string which denotes the OSD name, there is a + limit of 64 chars on this string) + -s systemid of the requested target OSD + (Might be empty) + (This string, if not empty is always an hex + representation of the 20 bytes osd_system_id) + +blocks-layout setup +------------------- + +TODO: Document the setup needs of the blocks layout driver diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 9cd14cfe6515..b466974e142f 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -118,6 +118,10 @@ Supported chips: Addresses scanned: I2C 0x48 through 0x4F Datasheet: Publicly available at NXP website http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf + * GMT G781 + Prefix: 'g781' + Addresses scanned: I2C 0x4c, 0x4d + Datasheet: Not publicly available from GMT Author: Jean Delvare <khali@linux-fr.org> diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc index 044531a86405..d0e7b3fa9e75 100644 --- a/Documentation/hwmon/mc13783-adc +++ b/Documentation/hwmon/mc13783-adc @@ -3,8 +3,11 @@ Kernel driver mc13783-adc Supported chips: * Freescale Atlas MC13783 - Prefix: 'mc13783_adc' + Prefix: 'mc13783' Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1 + * Freescale Atlas MC13892 + Prefix: 'mc13892' + Datasheet: http://cache.freescale.com/files/analog/doc/data_sheet/MC13892.pdf?fsrch=1&sr=1 Authors: Sascha Hauer <s.hauer@pengutronix.de> @@ -13,20 +16,21 @@ Authors: Description ----------- -The Freescale MC13783 is a Power Management and Audio Circuit. Among -other things it contains a 10-bit A/D converter. The converter has 16 -channels which can be used in different modes. -The A/D converter has a resolution of 2.25mV. Channels 0-4 have -a dedicated meaning with chip internal scaling applied. Channels 5-7 -can be used as general purpose inputs or alternatively in a dedicated -mode. Channels 12-15 are occupied by the touchscreen if it's active. +The Freescale MC13783 and MC13892 are Power Management and Audio Circuits. +Among other things they contain a 10-bit A/D converter. The converter has 16 +(MC13783) resp. 12 (MC13892) channels which can be used in different modes. The +A/D converter has a resolution of 2.25mV. -Currently the driver only supports channels 2 and 5-15 with no alternative -modes for channels 5-7. +Some channels can be used as General Purpose inputs or in a dedicated mode with +a chip internal scaling applied . -See this table for the meaning of the different channels and their chip -internal scaling: +Currently the driver only supports the Application Supply channel (BP / BPSNS), +the General Purpose inputs and touchscreen. +See the following tables for the meaning of the different channels and their +chip internal scaling: + +MC13783: Channel Signal Input Range Scaling ------------------------------------------------------------------------------- 0 Battery Voltage (BATT) 2.50 - 4.65V -2.40V @@ -34,7 +38,7 @@ Channel Signal Input Range Scaling 2 Application Supply (BP) 2.50 - 4.65V -2.40V 3 Charger Voltage (CHRGRAW) 0 - 10V / /5 0 - 20V /10 -4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25V - 0.25V x4 +4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25 - 0.25V x4 5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.30V No 6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.30V / No / 1.50 - 3.50V -1.20V @@ -48,3 +52,23 @@ Channel Signal Input Range Scaling 13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.30V No 14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.30V No 15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.30V No + +MC13892: +Channel Signal Input Range Scaling +------------------------------------------------------------------------------- +0 Battery Voltage (BATT) 0 - 4.8V /2 +1 Battery Current (BATT - BATTISNSCC) -60 - 60 mV x20 +2 Application Supply (BPSNS) 0 - 4.8V /2 +3 Charger Voltage (CHRGRAW) 0 - 12V / /5 + 0 - 20V /10 +4 Charger Current (CHRGISNS-BPSNS) / -0.3 - 0.3V / x4 / + Touchscreen X-plate 1 0 - 2.4V No +5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.4V No +6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.4V / No + Backup Voltage (LICELL) 0 - 3.6V x2/3 +7 General Purpose ADIN7 / UID / Die Temperature 0 - 2.4V / No / + 0 - 4.8V /2 +12 General Purpose TSX1 / Touchscreen X-plate 1 0 - 2.4V No +13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.4V No +14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.4V No +15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.4V No diff --git a/Documentation/hwmon/mcp3021 b/Documentation/hwmon/mcp3021 new file mode 100644 index 000000000000..325fd87e81b2 --- /dev/null +++ b/Documentation/hwmon/mcp3021 @@ -0,0 +1,22 @@ +Kernel driver MCP3021 +====================== + +Supported chips: + * Microchip Technology MCP3021 + Prefix: 'mcp3021' + Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21805a.pdf + +Author: Mingkai Hu + +Description +----------- + +This driver implements support for the Microchip Technology MCP3021 chip. + +The Microchip Technology Inc. MCP3021 is a successive approximation A/D +converter (ADC) with 10-bit resolution. +This device provides one single-ended input with very low power consumption. +Communication to the MCP3021 is performed using a 2-wire I2C compatible +interface. Standard (100 kHz) and Fast (400 kHz) I2C modes are available. +The default I2C device address is 0x4d (contact the Microchip factory for +additional address options). diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 247dcfd62034..58eac231fe69 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1086,8 +1086,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. no_x2apic_optout BIOS x2APIC opt-out request will be ignored - inttest= [IA-64] - iomem= Disable strict checking of access to MMIO memory strict regions from userspace. relaxed @@ -1672,6 +1670,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. of returning the full 64-bit number. The default is to return 64-bit inode numbers. + nfs.max_session_slots= + [NFSv4.1] Sets the maximum number of session slots + the client will attempt to negotiate with the server. + This limits the number of simultaneous RPC requests + that the client can send to the NFSv4.1 server. + Note that there is little point in setting this + value higher than the max_tcp_slot_table_limit. + nfs.nfs4_disable_idmapping= [NFSv4] When set to the default of '1', this option ensures that both the RPC level authentication @@ -1685,6 +1691,21 @@ bytes respectively. Such letter suffixes can also be entirely omitted. back to using the idmapper. To turn off this behaviour, set the value to '0'. + nfs.send_implementation_id = + [NFSv4.1] Send client implementation identification + information in exchange_id requests. + If zero, no implementation identification information + will be sent. + The default is to send the implementation identification + information. + + + objlayoutdriver.osd_login_prog= + [NFS] [OBJLAYOUT] sets the pathname to the program which + is used to automatically discover and login into new + osd-targets. Please see: + Documentation/filesystems/pnfs.txt for more explanations + nmi_debug= [KNL,AVR32,SH] Specify one or more actions to take when a NMI is triggered. Format: [state][,regs][,debounce][,die] @@ -2124,8 +2145,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. the default. off: Turn ECRC off on: Turn ECRC on. - realloc reallocate PCI resources if allocations done by BIOS - are erroneous. + realloc= Enable/disable reallocating PCI bridge resources + if allocations done by BIOS are too small to + accommodate resources required by all child + devices. + off: Turn realloc off + on: Turn realloc on + realloc same as realloc=on + noari do not use PCIe ARI. pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power Management. @@ -2133,6 +2160,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. force Enable ASPM even on devices that claim not to support it. WARNING: Forcing ASPM on may cause system lockups. + pcie_hp= [PCIE] PCI Express Hotplug driver options: + nomsi Do not use MSI for PCI Express Native Hotplug (this + makes all PCIe ports use INTx for hotplug services). + pcie_ports= [PCIE] PCIe ports handling: auto Ask the BIOS whether or not to use native PCIe services associated with PCIe ports (PME, hot-plug, AER). Use diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt index c4d8d151e0fe..0e542ab3d4a0 100644 --- a/Documentation/leds/leds-lp5521.txt +++ b/Documentation/leds/leds-lp5521.txt @@ -43,17 +43,23 @@ Format: 10x mA i.e 10 means 1.0 mA example platform data: Note: chan_nr can have values between 0 and 2. +The name of each channel can be configurable. +If the name field is not defined, the default name will be set to 'xxxx:channelN' +(XXXX : pdata->label or i2c client name, N : channel number) static struct lp5521_led_config lp5521_led_config[] = { { + .name = "red", .chan_nr = 0, .led_current = 50, .max_current = 130, }, { + .name = "green", .chan_nr = 1, .led_current = 0, .max_current = 130, }, { + .name = "blue", .chan_nr = 2, .led_current = 0, .max_current = 130, @@ -86,3 +92,60 @@ static struct lp5521_platform_data lp5521_platform_data = { If the current is set to 0 in the platform data, that channel is disabled and it is not visible in the sysfs. + +The 'update_config' : CONFIG register (ADDR 08h) +This value is platform-specific data. +If update_config is not defined, the CONFIG register is set with +'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'. +(Enable auto-powersave, set charge pump to auto, red to battery) + +example of update_config : + +#define LP5521_CONFIGS (LP5521_PWM_HF | LP5521_PWRSAVE_EN | \ + LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \ + LP5521_CLK_INT) + +static struct lp5521_platform_data lp5521_pdata = { + .led_config = lp5521_led_config, + .num_channels = ARRAY_SIZE(lp5521_led_config), + .clock_mode = LP5521_CLOCK_INT, + .update_config = LP5521_CONFIGS, +}; + +LED patterns : LP5521 has autonomous operation without external control. +Pattern data can be defined in the platform data. + +example of led pattern data : + +/* RGB(50,5,0) 500ms on, 500ms off, infinite loop */ +static u8 pattern_red[] = { + 0x40, 0x32, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00, + }; + +static u8 pattern_green[] = { + 0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00, + }; + +static struct lp5521_led_pattern board_led_patterns[] = { + { + .r = pattern_red, + .g = pattern_green, + .size_r = ARRAY_SIZE(pattern_red), + .size_g = ARRAY_SIZE(pattern_green), + }, +}; + +static struct lp5521_platform_data lp5521_platform_data = { + .led_config = lp5521_led_config, + .num_channels = ARRAY_SIZE(lp5521_led_config), + .clock_mode = LP5521_CLOCK_EXT, + .patterns = board_led_patterns, + .num_patterns = ARRAY_SIZE(board_led_patterns), +}; + +Then predefined led pattern(s) can be executed via the sysfs. +To start the pattern #1, +# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern +(xxxx : i2c bus & slave address) +To end the pattern, +# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt new file mode 100644 index 000000000000..70a048cd3fa3 --- /dev/null +++ b/Documentation/remoteproc.txt @@ -0,0 +1,322 @@ +Remote Processor Framework + +1. Introduction + +Modern SoCs typically have heterogeneous remote processor devices in asymmetric +multiprocessing (AMP) configurations, which may be running different instances +of operating system, whether it's Linux or any other flavor of real-time OS. + +OMAP4, for example, has dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP. +In a typical configuration, the dual cortex-A9 is running Linux in a SMP +configuration, and each of the other three cores (two M3 cores and a DSP) +is running its own instance of RTOS in an AMP configuration. + +The remoteproc framework allows different platforms/architectures to +control (power on, load firmware, power off) those remote processors while +abstracting the hardware differences, so the entire driver doesn't need to be +duplicated. In addition, this framework also adds rpmsg virtio devices +for remote processors that supports this kind of communication. This way, +platform-specific remoteproc drivers only need to provide a few low-level +handlers, and then all rpmsg drivers will then just work +(for more information about the virtio-based rpmsg bus and its drivers, +please read Documentation/rpmsg.txt). +Registration of other types of virtio devices is now also possible. Firmwares +just need to publish what kind of virtio devices do they support, and then +remoteproc will add those devices. This makes it possible to reuse the +existing virtio drivers with remote processor backends at a minimal development +cost. + +2. User API + + int rproc_boot(struct rproc *rproc) + - Boot a remote processor (i.e. load its firmware, power it on, ...). + If the remote processor is already powered on, this function immediately + returns (successfully). + Returns 0 on success, and an appropriate error value otherwise. + Note: to use this function you should already have a valid rproc + handle. There are several ways to achieve that cleanly (devres, pdata, + the way remoteproc_rpmsg.c does this, or, if this becomes prevalent, we + might also consider using dev_archdata for this). See also + rproc_get_by_name() below. + + void rproc_shutdown(struct rproc *rproc) + - Power off a remote processor (previously booted with rproc_boot()). + In case @rproc is still being used by an additional user(s), then + this function will just decrement the power refcount and exit, + without really powering off the device. + Every call to rproc_boot() must (eventually) be accompanied by a call + to rproc_shutdown(). Calling rproc_shutdown() redundantly is a bug. + Notes: + - we're not decrementing the rproc's refcount, only the power refcount. + which means that the @rproc handle stays valid even after + rproc_shutdown() returns, and users can still use it with a subsequent + rproc_boot(), if needed. + - don't call rproc_shutdown() to unroll rproc_get_by_name(), exactly + because rproc_shutdown() _does not_ decrement the refcount of @rproc. + To decrement the refcount of @rproc, use rproc_put() (but _only_ if + you acquired @rproc using rproc_get_by_name()). + + struct rproc *rproc_get_by_name(const char *name) + - Find an rproc handle using the remote processor's name, and then + boot it. If it's already powered on, then just immediately return + (successfully). Returns the rproc handle on success, and NULL on failure. + This function increments the remote processor's refcount, so always + use rproc_put() to decrement it back once rproc isn't needed anymore. + Note: currently rproc_get_by_name() and rproc_put() are not used anymore + by the rpmsg bus and its drivers. We need to scrutinize the use cases + that still need them, and see if we can migrate them to use the non + name-based boot/shutdown interface. + + void rproc_put(struct rproc *rproc) + - Decrement @rproc's power refcount and shut it down if it reaches zero + (essentially by just calling rproc_shutdown), and then decrement @rproc's + validity refcount too. + After this function returns, @rproc may _not_ be used anymore, and its + handle should be considered invalid. + This function should be called _iff_ the @rproc handle was grabbed by + calling rproc_get_by_name(). + +3. Typical usage + +#include <linux/remoteproc.h> + +/* in case we were given a valid 'rproc' handle */ +int dummy_rproc_example(struct rproc *my_rproc) +{ + int ret; + + /* let's power on and boot our remote processor */ + ret = rproc_boot(my_rproc); + if (ret) { + /* + * something went wrong. handle it and leave. + */ + } + + /* + * our remote processor is now powered on... give it some work + */ + + /* let's shut it down now */ + rproc_shutdown(my_rproc); +} + +4. API for implementors + + struct rproc *rproc_alloc(struct device *dev, const char *name, + const struct rproc_ops *ops, + const char *firmware, int len) + - Allocate a new remote processor handle, but don't register + it yet. Required parameters are the underlying device, the + name of this remote processor, platform-specific ops handlers, + the name of the firmware to boot this rproc with, and the + length of private data needed by the allocating rproc driver (in bytes). + + This function should be used by rproc implementations during + initialization of the remote processor. + After creating an rproc handle using this function, and when ready, + implementations should then call rproc_register() to complete + the registration of the remote processor. + On success, the new rproc is returned, and on failure, NULL. + + Note: _never_ directly deallocate @rproc, even if it was not registered + yet. Instead, if you just need to unroll rproc_alloc(), use rproc_free(). + + void rproc_free(struct rproc *rproc) + - Free an rproc handle that was allocated by rproc_alloc. + This function should _only_ be used if @rproc was only allocated, + but not registered yet. + If @rproc was already successfully registered (by calling + rproc_register()), then use rproc_unregister() instead. + + int rproc_register(struct rproc *rproc) + - Register @rproc with the remoteproc framework, after it has been + allocated with rproc_alloc(). + This is called by the platform-specific rproc implementation, whenever + a new remote processor device is probed. + Returns 0 on success and an appropriate error code otherwise. + Note: this function initiates an asynchronous firmware loading + context, which will look for virtio devices supported by the rproc's + firmware. + If found, those virtio devices will be created and added, so as a result + of registering this remote processor, additional virtio drivers might get + probed. + + int rproc_unregister(struct rproc *rproc) + - Unregister a remote processor, and decrement its refcount. + If its refcount drops to zero, then @rproc will be freed. If not, + it will be freed later once the last reference is dropped. + + This function should be called when the platform specific rproc + implementation decides to remove the rproc device. it should + _only_ be called if a previous invocation of rproc_register() + has completed successfully. + + After rproc_unregister() returns, @rproc is _not_ valid anymore and + it shouldn't be used. More specifically, don't call rproc_free() + or try to directly free @rproc after rproc_unregister() returns; + none of these are needed, and calling them is a bug. + + Returns 0 on success and -EINVAL if @rproc isn't valid. + +5. Implementation callbacks + +These callbacks should be provided by platform-specific remoteproc +drivers: + +/** + * struct rproc_ops - platform-specific device handlers + * @start: power on the device and boot it + * @stop: power off the device + * @kick: kick a virtqueue (virtqueue id given as a parameter) + */ +struct rproc_ops { + int (*start)(struct rproc *rproc); + int (*stop)(struct rproc *rproc); + void (*kick)(struct rproc *rproc, int vqid); +}; + +Every remoteproc implementation should at least provide the ->start and ->stop +handlers. If rpmsg/virtio functionality is also desired, then the ->kick handler +should be provided as well. + +The ->start() handler takes an rproc handle and should then power on the +device and boot it (use rproc->priv to access platform-specific private data). +The boot address, in case needed, can be found in rproc->bootaddr (remoteproc +core puts there the ELF entry point). +On success, 0 should be returned, and on failure, an appropriate error code. + +The ->stop() handler takes an rproc handle and powers the device down. +On success, 0 is returned, and on failure, an appropriate error code. + +The ->kick() handler takes an rproc handle, and an index of a virtqueue +where new message was placed in. Implementations should interrupt the remote +processor and let it know it has pending messages. Notifying remote processors +the exact virtqueue index to look in is optional: it is easy (and not +too expensive) to go through the existing virtqueues and look for new buffers +in the used rings. + +6. Binary Firmware Structure + +At this point remoteproc only supports ELF32 firmware binaries. However, +it is quite expected that other platforms/devices which we'd want to +support with this framework will be based on different binary formats. + +When those use cases show up, we will have to decouple the binary format +from the framework core, so we can support several binary formats without +duplicating common code. + +When the firmware is parsed, its various segments are loaded to memory +according to the specified device address (might be a physical address +if the remote processor is accessing memory directly). + +In addition to the standard ELF segments, most remote processors would +also include a special section which we call "the resource table". + +The resource table contains system resources that the remote processor +requires before it should be powered on, such as allocation of physically +contiguous memory, or iommu mapping of certain on-chip peripherals. +Remotecore will only power up the device after all the resource table's +requirement are met. + +In addition to system resources, the resource table may also contain +resource entries that publish the existence of supported features +or configurations by the remote processor, such as trace buffers and +supported virtio devices (and their configurations). + +The resource table begins with this header: + +/** + * struct resource_table - firmware resource table header + * @ver: version number + * @num: number of resource entries + * @reserved: reserved (must be zero) + * @offset: array of offsets pointing at the various resource entries + * + * The header of the resource table, as expressed by this structure, + * contains a version number (should we need to change this format in the + * future), the number of available resource entries, and their offsets + * in the table. + */ +struct resource_table { + u32 ver; + u32 num; + u32 reserved[2]; + u32 offset[0]; +} __packed; + +Immediately following this header are the resource entries themselves, +each of which begins with the following resource entry header: + +/** + * struct fw_rsc_hdr - firmware resource entry header + * @type: resource type + * @data: resource data + * + * Every resource entry begins with a 'struct fw_rsc_hdr' header providing + * its @type. The content of the entry itself will immediately follow + * this header, and it should be parsed according to the resource type. + */ +struct fw_rsc_hdr { + u32 type; + u8 data[0]; +} __packed; + +Some resources entries are mere announcements, where the host is informed +of specific remoteproc configuration. Other entries require the host to +do something (e.g. allocate a system resource). Sometimes a negotiation +is expected, where the firmware requests a resource, and once allocated, +the host should provide back its details (e.g. address of an allocated +memory region). + +Here are the various resource types that are currently supported: + +/** + * enum fw_resource_type - types of resource entries + * + * @RSC_CARVEOUT: request for allocation of a physically contiguous + * memory region. + * @RSC_DEVMEM: request to iommu_map a memory-based peripheral. + * @RSC_TRACE: announces the availability of a trace buffer into which + * the remote processor will be writing logs. + * @RSC_VDEV: declare support for a virtio device, and serve as its + * virtio header. + * @RSC_LAST: just keep this one at the end + * + * Please note that these values are used as indices to the rproc_handle_rsc + * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to + * check the validity of an index before the lookup table is accessed, so + * please update it as needed. + */ +enum fw_resource_type { + RSC_CARVEOUT = 0, + RSC_DEVMEM = 1, + RSC_TRACE = 2, + RSC_VDEV = 3, + RSC_LAST = 4, +}; + +For more details regarding a specific resource type, please see its +dedicated structure in include/linux/remoteproc.h. + +We also expect that platform-specific resource entries will show up +at some point. When that happens, we could easily add a new RSC_PLATFORM +type, and hand those resources to the platform-specific rproc driver to handle. + +7. Virtio and remoteproc + +The firmware should provide remoteproc information about virtio devices +that it supports, and their configurations: a RSC_VDEV resource entry +should specify the virtio device id (as in virtio_ids.h), virtio features, +virtio config space, vrings information, etc. + +When a new remote processor is registered, the remoteproc framework +will look for its resource table and will register the virtio devices +it supports. A firmware may support any number of virtio devices, and +of any type (a single remote processor can also easily support several +rpmsg virtio devices this way, if desired). + +Of course, RSC_VDEV resource entries are only good enough for static +allocation of virtio devices. Dynamic allocations will also be made possible +using the rpmsg bus (similar to how we already do dynamic allocations of +rpmsg channels; read more about it in rpmsg.txt). diff --git a/Documentation/rpmsg.txt b/Documentation/rpmsg.txt new file mode 100644 index 000000000000..409d9f964c5b --- /dev/null +++ b/Documentation/rpmsg.txt @@ -0,0 +1,293 @@ +Remote Processor Messaging (rpmsg) Framework + +Note: this document describes the rpmsg bus and how to write rpmsg drivers. +To learn how to add rpmsg support for new platforms, check out remoteproc.txt +(also a resident of Documentation/). + +1. Introduction + +Modern SoCs typically employ heterogeneous remote processor devices in +asymmetric multiprocessing (AMP) configurations, which may be running +different instances of operating system, whether it's Linux or any other +flavor of real-time OS. + +OMAP4, for example, has dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP. +Typically, the dual cortex-A9 is running Linux in a SMP configuration, +and each of the other three cores (two M3 cores and a DSP) is running +its own instance of RTOS in an AMP configuration. + +Typically AMP remote processors employ dedicated DSP codecs and multimedia +hardware accelerators, and therefore are often used to offload CPU-intensive +multimedia tasks from the main application processor. + +These remote processors could also be used to control latency-sensitive +sensors, drive random hardware blocks, or just perform background tasks +while the main CPU is idling. + +Users of those remote processors can either be userland apps (e.g. multimedia +frameworks talking with remote OMX components) or kernel drivers (controlling +hardware accessible only by the remote processor, reserving kernel-controlled +resources on behalf of the remote processor, etc..). + +Rpmsg is a virtio-based messaging bus that allows kernel drivers to communicate +with remote processors available on the system. In turn, drivers could then +expose appropriate user space interfaces, if needed. + +When writing a driver that exposes rpmsg communication to userland, please +keep in mind that remote processors might have direct access to the +system's physical memory and other sensitive hardware resources (e.g. on +OMAP4, remote cores and hardware accelerators may have direct access to the +physical memory, gpio banks, dma controllers, i2c bus, gptimers, mailbox +devices, hwspinlocks, etc..). Moreover, those remote processors might be +running RTOS where every task can access the entire memory/devices exposed +to the processor. To minimize the risks of rogue (or buggy) userland code +exploiting remote bugs, and by that taking over the system, it is often +desired to limit userland to specific rpmsg channels (see definition below) +it can send messages on, and if possible, minimize how much control +it has over the content of the messages. + +Every rpmsg device is a communication channel with a remote processor (thus +rpmsg devices are called channels). Channels are identified by a textual name +and have a local ("source") rpmsg address, and remote ("destination") rpmsg +address. + +When a driver starts listening on a channel, its rx callback is bound with +a unique rpmsg local address (a 32-bit integer). This way when inbound messages +arrive, the rpmsg core dispatches them to the appropriate driver according +to their destination address (this is done by invoking the driver's rx handler +with the payload of the inbound message). + + +2. User API + + int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len); + - sends a message across to the remote processor on a given channel. + The caller should specify the channel, the data it wants to send, + and its length (in bytes). The message will be sent on the specified + channel, i.e. its source and destination address fields will be + set to the channel's src and dst addresses. + + In case there are no TX buffers available, the function will block until + one becomes available (i.e. until the remote processor consumes + a tx buffer and puts it back on virtio's used descriptor ring), + or a timeout of 15 seconds elapses. When the latter happens, + -ERESTARTSYS is returned. + The function can only be called from a process context (for now). + Returns 0 on success and an appropriate error value on failure. + + int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst); + - sends a message across to the remote processor on a given channel, + to a destination address provided by the caller. + The caller should specify the channel, the data it wants to send, + its length (in bytes), and an explicit destination address. + The message will then be sent to the remote processor to which the + channel belongs, using the channel's src address, and the user-provided + dst address (thus the channel's dst address will be ignored). + + In case there are no TX buffers available, the function will block until + one becomes available (i.e. until the remote processor consumes + a tx buffer and puts it back on virtio's used descriptor ring), + or a timeout of 15 seconds elapses. When the latter happens, + -ERESTARTSYS is returned. + The function can only be called from a process context (for now). + Returns 0 on success and an appropriate error value on failure. + + int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, + void *data, int len); + - sends a message across to the remote processor, using the src and dst + addresses provided by the user. + The caller should specify the channel, the data it wants to send, + its length (in bytes), and explicit source and destination addresses. + The message will then be sent to the remote processor to which the + channel belongs, but the channel's src and dst addresses will be + ignored (and the user-provided addresses will be used instead). + + In case there are no TX buffers available, the function will block until + one becomes available (i.e. until the remote processor consumes + a tx buffer and puts it back on virtio's used descriptor ring), + or a timeout of 15 seconds elapses. When the latter happens, + -ERESTARTSYS is returned. + The function can only be called from a process context (for now). + Returns 0 on success and an appropriate error value on failure. + + int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len); + - sends a message across to the remote processor on a given channel. + The caller should specify the channel, the data it wants to send, + and its length (in bytes). The message will be sent on the specified + channel, i.e. its source and destination address fields will be + set to the channel's src and dst addresses. + + In case there are no TX buffers available, the function will immediately + return -ENOMEM without waiting until one becomes available. + The function can only be called from a process context (for now). + Returns 0 on success and an appropriate error value on failure. + + int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) + - sends a message across to the remote processor on a given channel, + to a destination address provided by the user. + The user should specify the channel, the data it wants to send, + its length (in bytes), and an explicit destination address. + The message will then be sent to the remote processor to which the + channel belongs, using the channel's src address, and the user-provided + dst address (thus the channel's dst address will be ignored). + + In case there are no TX buffers available, the function will immediately + return -ENOMEM without waiting until one becomes available. + The function can only be called from a process context (for now). + Returns 0 on success and an appropriate error value on failure. + + int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, + void *data, int len); + - sends a message across to the remote processor, using source and + destination addresses provided by the user. + The user should specify the channel, the data it wants to send, + its length (in bytes), and explicit source and destination addresses. + The message will then be sent to the remote processor to which the + channel belongs, but the channel's src and dst addresses will be + ignored (and the user-provided addresses will be used instead). + + In case there are no TX buffers available, the function will immediately + return -ENOMEM without waiting until one becomes available. + The function can only be called from a process context (for now). + Returns 0 on success and an appropriate error value on failure. + + struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *rpdev, + void (*cb)(struct rpmsg_channel *, void *, int, void *, u32), + void *priv, u32 addr); + - every rpmsg address in the system is bound to an rx callback (so when + inbound messages arrive, they are dispatched by the rpmsg bus using the + appropriate callback handler) by means of an rpmsg_endpoint struct. + + This function allows drivers to create such an endpoint, and by that, + bind a callback, and possibly some private data too, to an rpmsg address + (either one that is known in advance, or one that will be dynamically + assigned for them). + + Simple rpmsg drivers need not call rpmsg_create_ept, because an endpoint + is already created for them when they are probed by the rpmsg bus + (using the rx callback they provide when they registered to the rpmsg bus). + + So things should just work for simple drivers: they already have an + endpoint, their rx callback is bound to their rpmsg address, and when + relevant inbound messages arrive (i.e. messages which their dst address + equals to the src address of their rpmsg channel), the driver's handler + is invoked to process it. + + That said, more complicated drivers might do need to allocate + additional rpmsg addresses, and bind them to different rx callbacks. + To accomplish that, those drivers need to call this function. + Drivers should provide their channel (so the new endpoint would bind + to the same remote processor their channel belongs to), an rx callback + function, an optional private data (which is provided back when the + rx callback is invoked), and an address they want to bind with the + callback. If addr is RPMSG_ADDR_ANY, then rpmsg_create_ept will + dynamically assign them an available rpmsg address (drivers should have + a very good reason why not to always use RPMSG_ADDR_ANY here). + + Returns a pointer to the endpoint on success, or NULL on error. + + void rpmsg_destroy_ept(struct rpmsg_endpoint *ept); + - destroys an existing rpmsg endpoint. user should provide a pointer + to an rpmsg endpoint that was previously created with rpmsg_create_ept(). + + int register_rpmsg_driver(struct rpmsg_driver *rpdrv); + - registers an rpmsg driver with the rpmsg bus. user should provide + a pointer to an rpmsg_driver struct, which contains the driver's + ->probe() and ->remove() functions, an rx callback, and an id_table + specifying the names of the channels this driver is interested to + be probed with. + + void unregister_rpmsg_driver(struct rpmsg_driver *rpdrv); + - unregisters an rpmsg driver from the rpmsg bus. user should provide + a pointer to a previously-registered rpmsg_driver struct. + Returns 0 on success, and an appropriate error value on failure. + + +3. Typical usage + +The following is a simple rpmsg driver, that sends an "hello!" message +on probe(), and whenever it receives an incoming message, it dumps its +content to the console. + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/rpmsg.h> + +static void rpmsg_sample_cb(struct rpmsg_channel *rpdev, void *data, int len, + void *priv, u32 src) +{ + print_hex_dump(KERN_INFO, "incoming message:", DUMP_PREFIX_NONE, + 16, 1, data, len, true); +} + +static int rpmsg_sample_probe(struct rpmsg_channel *rpdev) +{ + int err; + + dev_info(&rpdev->dev, "chnl: 0x%x -> 0x%x\n", rpdev->src, rpdev->dst); + + /* send a message on our channel */ + err = rpmsg_send(rpdev, "hello!", 6); + if (err) { + pr_err("rpmsg_send failed: %d\n", err); + return err; + } + + return 0; +} + +static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev) +{ + dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n"); +} + +static struct rpmsg_device_id rpmsg_driver_sample_id_table[] = { + { .name = "rpmsg-client-sample" }, + { }, +}; +MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_sample_id_table); + +static struct rpmsg_driver rpmsg_sample_client = { + .drv.name = KBUILD_MODNAME, + .drv.owner = THIS_MODULE, + .id_table = rpmsg_driver_sample_id_table, + .probe = rpmsg_sample_probe, + .callback = rpmsg_sample_cb, + .remove = __devexit_p(rpmsg_sample_remove), +}; + +static int __init init(void) +{ + return register_rpmsg_driver(&rpmsg_sample_client); +} +module_init(init); + +static void __exit fini(void) +{ + unregister_rpmsg_driver(&rpmsg_sample_client); +} +module_exit(fini); + +Note: a similar sample which can be built and loaded can be found +in samples/rpmsg/. + +4. Allocations of rpmsg channels: + +At this point we only support dynamic allocations of rpmsg channels. + +This is possible only with remote processors that have the VIRTIO_RPMSG_F_NS +virtio device feature set. This feature bit means that the remote +processor supports dynamic name service announcement messages. + +When this feature is enabled, creation of rpmsg devices (i.e. channels) +is completely dynamic: the remote processor announces the existence of a +remote rpmsg service by sending a name service message (which contains +the name and rpmsg addr of the remote service, see struct rpmsg_ns_msg). + +This message is then handled by the rpmsg bus, which in turn dynamically +creates and registers an rpmsg channel (which represents the remote service). +If/when a relevant rpmsg driver is registered, it will be immediately probed +by the bus, and can then start sending messages to the remote service. + +The plan is also to add static creation of rpmsg channels via the virtio +config space, but it's not implemented yet. diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 23584d0c6a75..f316d1816fcd 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -32,3 +32,4 @@ 31 -> Leadtek Winfast PxDVR3200 H XC4000 [107d:6f39] 32 -> MPX-885 33 -> Mygica X8507 [14f1:8502] + 34 -> TerraTec Cinergy T PCIe Dual [153b:117e] diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index eee18e6962b6..fa4b3f947468 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -59,7 +59,7 @@ 58 -> Pinnacle PCTV HD 800i [11bd:0051] 59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530] 60 -> Pinnacle Hybrid PCTV [12ab:1788] - 61 -> Leadtek TV2000 XP Global [107d:6f18,107d:6618] + 61 -> Leadtek TV2000 XP Global [107d:6f18,107d:6618,107d:6619] 62 -> PowerColor RA330 [14f1:ea3d] 63 -> Geniatech X8000-MT DVBT [14f1:8852] 64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30] @@ -87,3 +87,5 @@ 86 -> TeVii S464 DVB-S/S2 [d464:9022] 87 -> Leadtek WinFast DTV2000 H PLUS [107d:6f42] 88 -> Leadtek WinFast DTV1800 H (XC4000) [107d:6f38] + 89 -> Leadtek TV2000 XP Global (SC4100) [107d:6f36] + 90 -> Leadtek TV2000 XP Global (XC4100) [107d:6f43] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index e7be3ac49ead..d99262dda533 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -7,7 +7,7 @@ 6 -> Terratec Cinergy 200 USB (em2800) 7 -> Leadtek Winfast USB II (em2800) [0413:6023] 8 -> Kworld USB2800 (em2800) - 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a] + 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a,093b:a003] 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] 11 -> Terratec Hybrid XS (em2880) 12 -> Kworld PVR TV 2800 RF (em2820/em2840) @@ -61,7 +61,7 @@ 61 -> Pixelview PlayTV Box 4 USB 2.0 (em2820/em2840) 62 -> Gadmei TVR200 (em2820/em2840) 63 -> Kaiomy TVnPC U2 (em2860) [eb1a:e303] - 64 -> Easy Cap Capture DC-60 (em2860) + 64 -> Easy Cap Capture DC-60 (em2860) [1b80:e309] 65 -> IO-DATA GV-MVP/SZ (em2820/em2840) [04bb:0515] 66 -> Empire dual TV (em2880) 67 -> Terratec Grabby (em2860) [0ccd:0096,0ccd:10AF] @@ -76,7 +76,11 @@ 76 -> KWorld PlusTV 340U or UB435-Q (ATSC) (em2870) [1b80:a340] 77 -> EM2874 Leadership ISDBT (em2874) 78 -> PCTV nanoStick T2 290e (em28174) - 79 -> Terratec Cinergy H5 (em2884) [0ccd:10a2,0ccd:10ad] + 79 -> Terratec Cinergy H5 (em2884) [0ccd:008e,0ccd:00ac,0ccd:10a2,0ccd:10ad] 80 -> PCTV DVB-S2 Stick (460e) (em28174) 81 -> Hauppauge WinTV HVR 930C (em2884) [2040:1605] 82 -> Terratec Cinergy HTC Stick (em2884) [0ccd:00b2] + 83 -> Honestech Vidbox NW03 (em2860) [eb1a:5006] + 84 -> MaxMedia UB425-TC (em2874) [1b80:e425] + 85 -> PCTV QuatroStick (510e) (em2884) [2304:0242] + 86 -> PCTV QuatroStick nano (520e) (em2884) [2013:0251] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index e7ef38a19859..34f3b330e5f4 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -187,3 +187,4 @@ 186 -> Beholder BeholdTV 501 [5ace:5010] 187 -> Beholder BeholdTV 503 FM [5ace:5030] 188 -> Sensoray 811/911 [6000:0811,6000:0911] +189 -> Kworld PC150-U [17de:a134] diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 6323b7a20719..c83f6e418879 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -78,10 +78,11 @@ tuner=77 - TCL tuner MF02GIP-5N-E tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner tuner=79 - Philips PAL/SECAM multi (FM1216 MK5) tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough -tuner=81 - Xceive 4000 tuner tuner=81 - Partsnic (Daewoo) PTI-5NF05 tuner=82 - Philips CU1216L tuner=83 - NXP TDA18271 tuner=84 - Sony BTF-Pxn01Z tuner=85 - Philips FQ1236 MK5 tuner=86 - Tena TNF5337 MFD +tuner=87 - Xceive 4000 tuner +tuner=88 - Xceive 5000C tuner diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt new file mode 100644 index 000000000000..eb049708f3e4 --- /dev/null +++ b/Documentation/video4linux/fimc.txt @@ -0,0 +1,178 @@ +Samsung S5P/EXYNOS4 FIMC driver + +Copyright (C) 2012 Samsung Electronics Co., Ltd. +--------------------------------------------------------------------------- + +The FIMC (Fully Interactive Mobile Camera) device available in Samsung +SoC Application Processors is an integrated camera host interface, color +space converter, image resizer and rotator. It's also capable of capturing +data from LCD controller (FIMD) through the SoC internal writeback data +path. There are multiple FIMC instances in the SoCs (up to 4), having +slightly different capabilities, like pixel alignment constraints, rotator +availability, LCD writeback support, etc. The driver is located at +drivers/media/video/s5p-fimc directory. + +1. Supported SoCs +================= + +S5PC100 (mem-to-mem only), S5PV210, EXYNOS4210 + +2. Supported features +===================== + + - camera parallel interface capture (ITU-R.BT601/565); + - camera serial interface capture (MIPI-CSI2); + - memory-to-memory processing (color space conversion, scaling, mirror + and rotation); + - dynamic pipeline re-configuration at runtime (re-attachment of any FIMC + instance to any parallel video input or any MIPI-CSI front-end); + - runtime PM and system wide suspend/resume + +Not currently supported: + - LCD writeback input + - per frame clock gating (mem-to-mem) + +3. Files partitioning +===================== + +- media device driver + drivers/media/video/s5p-fimc/fimc-mdevice.[ch] + + - camera capture video device driver + drivers/media/video/s5p-fimc/fimc-capture.c + + - MIPI-CSI2 receiver subdev + drivers/media/video/s5p-fimc/mipi-csis.[ch] + + - video post-processor (mem-to-mem) + drivers/media/video/s5p-fimc/fimc-core.c + + - common files + drivers/media/video/s5p-fimc/fimc-core.h + drivers/media/video/s5p-fimc/fimc-reg.h + drivers/media/video/s5p-fimc/regs-fimc.h + +4. User space interfaces +======================== + +4.1. Media device interface + +The driver supports Media Controller API as defined at +http://http://linuxtv.org/downloads/v4l-dvb-apis/media_common.html +The media device driver name is "SAMSUNG S5P FIMC". + +The purpose of this interface is to allow changing assignment of FIMC instances +to the SoC peripheral camera input at runtime and optionally to control internal +connections of the MIPI-CSIS device(s) to the FIMC entities. + +The media device interface allows to configure the SoC for capturing image +data from the sensor through more than one FIMC instance (e.g. for simultaneous +viewfinder and still capture setup). +Reconfiguration is done by enabling/disabling media links created by the driver +during initialization. The internal device topology can be easily discovered +through media entity and links enumeration. + +4.2. Memory-to-memory video node + +V4L2 memory-to-memory interface at /dev/video? device node. This is standalone +video device, it has no media pads. However please note the mem-to-mem and +capture video node operation on same FIMC instance is not allowed. The driver +detects such cases but the applications should prevent them to avoid an +undefined behaviour. + +4.3. Capture video node + +The driver supports V4L2 Video Capture Interface as defined at: +http://linuxtv.org/downloads/v4l-dvb-apis/devices.html + +At the capture and mem-to-mem video nodes only the multi-planar API is +supported. For more details see: +http://linuxtv.org/downloads/v4l-dvb-apis/planar-apis.html + +4.4. Camera capture subdevs + +Each FIMC instance exports a sub-device node (/dev/v4l-subdev?), a sub-device +node is also created per each available and enabled at the platform level +MIPI-CSI receiver device (currently up to two). + +4.5. sysfs + +In order to enable more precise camera pipeline control through the sub-device +API the driver creates a sysfs entry associated with "s5p-fimc-md" platform +device. The entry path is: /sys/platform/devices/s5p-fimc-md/subdev_conf_mode. + +In typical use case there could be a following capture pipeline configuration: +sensor subdev -> mipi-csi subdev -> fimc subdev -> video node + +When we configure these devices through sub-device API at user space, the +configuration flow must be from left to right, and the video node is +configured as last one. +When we don't use sub-device user space API the whole configuration of all +devices belonging to the pipeline is done at the video node driver. +The sysfs entry allows to instruct the capture node driver not to configure +the sub-devices (format, crop), to avoid resetting the subdevs' configuration +when the last configuration steps at the video node is performed. + +For full sub-device control support (subdevs configured at user space before +starting streaming): +# echo "sub-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode + +For V4L2 video node control only (subdevs configured internally by the host +driver): +# echo "vid-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode +This is a default option. + +5. Device mapping to video and subdev device nodes +================================================== + +There are associated two video device nodes with each device instance in +hardware - video capture and mem-to-mem and additionally a subdev node for +more precise FIMC capture subsystem control. In addition a separate v4l2 +sub-device node is created per each MIPI-CSIS device. + +How to find out which /dev/video? or /dev/v4l-subdev? is assigned to which +device? + +You can either grep through the kernel log to find relevant information, i.e. +# dmesg | grep -i fimc +(note that udev, if present, might still have rearranged the video nodes), + +or retrieve the information from /dev/media? with help of the media-ctl tool: +# media-ctl -p + +6. Platform support +=================== + +The machine code (plat-s5p and arch/arm/mach-*) must select following options + +CONFIG_S5P_DEV_FIMC0 mandatory +CONFIG_S5P_DEV_FIMC1 \ +CONFIG_S5P_DEV_FIMC2 | optional +CONFIG_S5P_DEV_FIMC3 | +CONFIG_S5P_SETUP_FIMC / +CONFIG_S5P_SETUP_MIPIPHY \ +CONFIG_S5P_DEV_CSIS0 | optional for MIPI-CSI interface +CONFIG_S5P_DEV_CSIS1 / + +Except that, relevant s5p_device_fimc? should be registered in the machine code +in addition to a "s5p-fimc-md" platform device to which the media device driver +is bound. The "s5p-fimc-md" device instance is required even if only mem-to-mem +operation is used. + +The description of sensor(s) attached to FIMC/MIPI-CSIS camera inputs should be +passed as the "s5p-fimc-md" device platform_data. The platform data structure +is defined in file include/media/s5p_fimc.h. + +7. Build +======== + +This driver depends on following config options: +PLAT_S5P, +PM_RUNTIME, +I2C, +REGULATOR, +VIDEO_V4L2_SUBDEV_API, + +If the driver is built as a loadable kernel module (CONFIG_VIDEO_SAMSUNG_S5P_FIMC=m) +two modules are created (in addition to the core v4l2 modules): s5p-fimc.ko and +optional s5p-csis.ko (MIPI-CSI receiver subdev). diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index f2060f0dc02c..e6c2842407a4 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -217,6 +217,7 @@ ov534_9 06f8:3003 Hercules Dualpix HD Weblog sonixj 06f8:3004 Hercules Classic Silver sonixj 06f8:3008 Hercules Deluxe Optical Glass pac7302 06f8:3009 Hercules Classic Link +pac7302 06f8:301b Hercules Link nw80x 0728:d001 AVerMedia Camguard spca508 0733:0110 ViewQuest VQ110 spca501 0733:0401 Intel Create and Share |