diff options
Diffstat (limited to 'Documentation')
71 files changed, 2329 insertions, 635 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 43e89b1537d9..cc10ce7dc339 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -145,7 +145,7 @@ fb/ feature-removal-schedule.txt - list of files and features that are going to be removed. filesystems/ - - directory with info on the various filesystems that Linux supports. + - info on the vfs and the various filesystems that Linux supports. firmware_class/ - request_firmware() hotplug interface info. floppy.txt @@ -230,8 +230,6 @@ local_ops.txt - semantics and behavior of local atomic operations. lockdep-design.txt - documentation on the runtime locking correctness validator. -locks.txt - - info on file locking implementations, flock() vs. fcntl(), etc. logo.gif - full colour GIF image of Linux logo (penguin - Tux). logo.txt @@ -240,8 +238,6 @@ m68k/ - directory with info about Linux on Motorola 68k architecture. magic-number.txt - list of magic numbers used to mark/protect kernel data structures. -mandatory.txt - - info on the Linux implementation of Sys V mandatory file locking. mca.txt - info on supporting Micro Channel Architecture (e.g. PS/2) systems. md.txt diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index cc7a8c39fb6f..b939ebb62871 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -68,6 +68,9 @@ size and dma_handle must all be the same as those passed into the consistent allocate. cpu_addr must be the virtual address returned by the consistent allocate. +Note that unlike their sibling allocation calls, these routines +may only be called with IRQs enabled. + Part Ib - Using small dma-coherent buffers ------------------------------------------ diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index e07f2530326b..3c8ae020b6a7 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -514,7 +514,7 @@ With scatterlists, you map a region gathered from several regions by: int i, count = pci_map_sg(dev, sglist, nents, direction); struct scatterlist *sg; - for (i = 0, sg = sglist; i < count; i++, sg++) { + for_each_sg(sglist, sg, count, i) { hw_address[i] = sg_dma_address(sg); hw_len[i] = sg_dma_len(sg); } @@ -782,5 +782,5 @@ following people: Jay Estabrook <Jay.Estabrook@compaq.com> Thomas Sailer <sailer@ife.ee.ethz.ch> Andrea Arcangeli <andrea@suse.de> - Jens Axboe <axboe@suse.de> + Jens Axboe <jens.axboe@oracle.com> David Mosberger-Tang <davidm@hpl.hp.com> diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 08687e45e19d..1a7f53068ec2 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -11,7 +11,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ procfs-guide.xml writing_usb_driver.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ - genericirq.xml + genericirq.xml s390-drivers.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/deviceiobook.tmpl b/Documentation/DocBook/deviceiobook.tmpl index c917de681ccd..361c884d860d 100644 --- a/Documentation/DocBook/deviceiobook.tmpl +++ b/Documentation/DocBook/deviceiobook.tmpl @@ -316,7 +316,7 @@ CPU B: spin_unlock_irqrestore(&dev_lock, flags) <chapter id="pubfunctions"> <title>Public Functions Provided</title> -!Iinclude/asm-i386/io.h +!Iinclude/asm-x86/io_32.h !Elib/iomap.c </chapter> diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index e5da4f2b7c22..230cbf753782 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -45,8 +45,8 @@ </sect1> <sect1><title>Atomic and pointer manipulation</title> -!Iinclude/asm-i386/atomic.h -!Iinclude/asm-i386/unaligned.h +!Iinclude/asm-x86/atomic_32.h +!Iinclude/asm-x86/unaligned_32.h </sect1> <sect1><title>Delaying, scheduling, and timer routines</title> @@ -119,7 +119,7 @@ X!Ilib/string.c !Elib/string.c </sect1> <sect1><title>Bit Operations</title> -!Iinclude/asm-i386/bitops.h +!Iinclude/asm-x86/bitops_32.h </sect1> </chapter> @@ -155,8 +155,8 @@ X!Ilib/string.c !Emm/slab.c </sect1> <sect1><title>User Space Memory Access</title> -!Iinclude/asm-i386/uaccess.h -!Earch/i386/lib/usercopy.c +!Iinclude/asm-x86/uaccess_32.h +!Earch/x86/lib/usercopy_32.c </sect1> <sect1><title>More Memory Management Functions</title> !Emm/readahead.c @@ -293,7 +293,7 @@ X!Ekernel/module.c </sect1> <sect1><title>MTRR Handling</title> -!Earch/i386/kernel/cpu/mtrr/main.c +!Earch/x86/kernel/cpu/mtrr/main.c </sect1> <sect1><title>PCI Support Library</title> @@ -316,14 +316,14 @@ X!Edrivers/pci/hotplug.c <sect1><title>MCA Architecture</title> <sect2><title>MCA Device Functions</title> <para> - Refer to the file arch/i386/kernel/mca.c for more information. + Refer to the file arch/x86/kernel/mca_32.c for more information. </para> <!-- FIXME: Removed for now since no structured comments in source -X!Earch/i386/kernel/mca.c +X!Earch/x86/kernel/mca_32.c --> </sect2> <sect2><title>MCA Bus DMA</title> -!Iinclude/asm-i386/mca_dma.h +!Iinclude/asm-x86/mca_dma.h </sect2> </sect1> </chapter> diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl index 582032eea872..4c63e5864160 100644 --- a/Documentation/DocBook/kernel-hacking.tmpl +++ b/Documentation/DocBook/kernel-hacking.tmpl @@ -1239,7 +1239,7 @@ static struct block_device_operations opt_fops = { </para> <para> - <filename>include/asm-i386/delay.h:</filename> + <filename>include/asm-x86/delay_32.h:</filename> </para> <programlisting> #define ndelay(n) (__builtin_constant_p(n) ? \ @@ -1265,7 +1265,7 @@ static struct block_device_operations opt_fops = { </programlisting> <para> - <filename>include/asm-i386/uaccess.h:</filename> + <filename>include/asm-x86/uaccess_32.h:</filename> </para> <programlisting> diff --git a/Documentation/DocBook/mcabook.tmpl b/Documentation/DocBook/mcabook.tmpl index 42a760cd7467..529a53dc1389 100644 --- a/Documentation/DocBook/mcabook.tmpl +++ b/Documentation/DocBook/mcabook.tmpl @@ -101,7 +101,7 @@ <chapter id="dmafunctions"> <title>DMA Functions Provided</title> -!Iinclude/asm-i386/mca_dma.h +!Iinclude/asm-x86/mca_dma.h </chapter> </book> diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index a8c8cce50633..6fbc41d98c1e 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -275,16 +275,13 @@ int __init board_init (void) int err = 0; /* Allocate memory for MTD device structure and private data */ - board_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), GFP_KERNEL); + board_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!board_mtd) { printk ("Unable to allocate NAND MTD device structure.\n"); err = -ENOMEM; goto out; } - /* Initialize structures */ - memset ((char *) board_mtd, 0, sizeof(struct mtd_info) + sizeof(struct nand_chip)); - /* map physical adress */ baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024); if(!baseaddr){ diff --git a/Documentation/DocBook/s390-drivers.tmpl b/Documentation/DocBook/s390-drivers.tmpl new file mode 100644 index 000000000000..254e769282a4 --- /dev/null +++ b/Documentation/DocBook/s390-drivers.tmpl @@ -0,0 +1,149 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="s390drivers"> + <bookinfo> + <title>Writing s390 channel device drivers</title> + + <authorgroup> + <author> + <firstname>Cornelia</firstname> + <surname>Huck</surname> + <affiliation> + <address> + <email>cornelia.huck@de.ibm.com</email> + </address> + </affiliation> + </author> + </authorgroup> + + <copyright> + <year>2007</year> + <holder>IBM Corp.</holder> + </copyright> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + + <para> + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + + <para> + For more details see the file COPYING in the source + distribution of Linux. + </para> + </legalnotice> + </bookinfo> + +<toc></toc> + + <chapter id="intro"> + <title>Introduction</title> + <para> + This document describes the interfaces available for device drivers that + drive s390 based channel attached devices. This includes interfaces for + interaction with the hardware and interfaces for interacting with the + common driver core. Those interfaces are provided by the s390 common I/O + layer. + </para> + <para> + The document assumes a familarity with the technical terms associated + with the s390 channel I/O architecture. For a description of this + architecture, please refer to the "z/Architecture: Principles of + Operation", IBM publication no. SA22-7832. + </para> + <para> + While most I/O devices on a s390 system are typically driven through the + channel I/O mechanism described here, there are various other methods + (like the diag interface). These are out of the scope of this document. + </para> + <para> + Some additional information can also be found in the kernel source + under Documentation/s390/driver-model.txt. + </para> + </chapter> + <chapter id="ccw"> + <title>The ccw bus</title> + <para> + The ccw bus typically contains the majority of devices available to + a s390 system. Named after the channel command word (ccw), the basic + command structure used to address its devices, the ccw bus contains + so-called channel attached devices. They are addressed via subchannels, + visible on the css bus. A device driver, however, will never interact + with the subchannel directly, but only via the device on the ccw bus, + the ccw device. + </para> + <sect1 id="channelIO"> + <title>I/O functions for channel-attached devices</title> + <para> + Some hardware structures have been translated into C structures for use + by the common I/O layer and device drivers. For more information on + the hardware structures represented here, please consult the Principles + of Operation. + </para> +!Iinclude/asm-s390/cio.h + </sect1> + <sect1 id="ccwdev"> + <title>ccw devices</title> + <para> + Devices that want to initiate channel I/O need to attach to the ccw bus. + Interaction with the driver core is done via the common I/O layer, which + provides the abstractions of ccw devices and ccw device drivers. + </para> + <para> + The functions that initiate or terminate channel I/O all act upon a + ccw device structure. Device drivers must not bypass those functions + or strange side effects may happen. + </para> +!Iinclude/asm-s390/ccwdev.h +!Edrivers/s390/cio/device.c +!Edrivers/s390/cio/device_ops.c + </sect1> + <sect1 id="cmf"> + <title>The channel-measurement facility</title> + <para> + The channel-measurement facility provides a means to collect + measurement data which is made available by the channel subsystem + for each channel attached device. + </para> +!Iinclude/asm-s390/cmb.h +!Edrivers/s390/cio/cmf.c + </sect1> + </chapter> + + <chapter id="ccwgroup"> + <title>The ccwgroup bus</title> + <para> + The ccwgroup bus only contains artificial devices, created by the user. + Many networking devices (e.g. qeth) are in fact composed of several + ccw devices (like read, write and data channel for qeth). The + ccwgroup bus provides a mechanism to create a meta-device which + contains those ccw devices as slave devices and can be associated + with the netdevice. + </para> + <sect1 id="ccwgroupdevices"> + <title>ccw group devices</title> +!Iinclude/asm-s390/ccwgroup.h +!Edrivers/s390/cio/ccwgroup.c + </sect1> + </chapter> + +</book> diff --git a/Documentation/HOWTO b/Documentation/HOWTO index c64e969dc33b..dceb30921498 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -330,7 +330,7 @@ Here is a list of some of the different kernel trees available: - ACPI development tree, Len Brown <len.brown@intel.com> git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git - - Block development tree, Jens Axboe <axboe@suse.de> + - Block development tree, Jens Axboe <jens.axboe@oracle.com> git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git - DRM development tree, Dave Airlie <airlied@linux.ie> diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt index 0d8240774fca..a51f693c1541 100644 --- a/Documentation/MSI-HOWTO.txt +++ b/Documentation/MSI-HOWTO.txt @@ -241,68 +241,7 @@ address space of the MSI-X table/MSI-X PBA. Otherwise, the PCI subsystem will fail enabling MSI-X on its hardware device when it calls the function pci_enable_msix(). -5.3.2 Handling MSI-X allocation - -Determining the number of MSI-X vectors allocated to a function is -dependent on the number of MSI capable devices and MSI-X capable -devices populated in the system. The policy of allocating MSI-X -vectors to a function is defined as the following: - -#of MSI-X vectors allocated to a function = (x - y)/z where - -x = The number of available PCI vector resources by the time - the device driver calls pci_enable_msix(). The PCI vector - resources is the sum of the number of unassigned vectors - (new) and the number of released vectors when any MSI/MSI-X - device driver switches its hardware device back to a legacy - mode or is hot-removed. The number of unassigned vectors - may exclude some vectors reserved, as defined in parameter - NR_HP_RESERVED_VECTORS, for the case where the system is - capable of supporting hot-add/hot-remove operations. Users - may change the value defined in NR_HR_RESERVED_VECTORS to - meet their specific needs. - -y = The number of MSI capable devices populated in the system. - This policy ensures that each MSI capable device has its - vector reserved to avoid the case where some MSI-X capable - drivers may attempt to claim all available vector resources. - -z = The number of MSI-X capable devices populated in the system. - This policy ensures that maximum (x - y) is distributed - evenly among MSI-X capable devices. - -Note that the PCI subsystem scans y and z during a bus enumeration. -When the PCI subsystem completes configuring MSI/MSI-X capability -structure of a device as requested by its device driver, y/z is -decremented accordingly. - -5.3.3 Handling MSI-X shortages - -For the case where fewer MSI-X vectors are allocated to a function -than requested, the function pci_enable_msix() will return the -maximum number of MSI-X vectors available to the caller. A device -driver may re-send its request with fewer or equal vectors indicated -in the return. For example, if a device driver requests 5 vectors, but -the number of available vectors is 3 vectors, a value of 3 will be -returned as a result of pci_enable_msix() call. A function could be -designed for its driver to use only 3 MSI-X table entries as -different combinations as ABC--, A-B-C, A--CB, etc. Note that this -patch does not support multiple entries with the same vector. Such -attempt by a device driver to use 5 MSI-X table entries with 3 vectors -as ABBCC, AABCC, BCCBA, etc will result as a failure by the function -pci_enable_msix(). Below are the reasons why supporting multiple -entries with the same vector is an undesirable solution. - - - The PCI subsystem cannot determine the entry that - generated the message to mask/unmask MSI while handling - software driver ISR. Attempting to walk through all MSI-X - table entries (2048 max) to mask/unmask any match vector - is an undesirable solution. - - - Walking through all MSI-X table entries (2048 max) to handle - SMP affinity of any match vector is an undesirable solution. - -5.3.4 API pci_enable_msix +5.3.2 API pci_enable_msix int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) @@ -339,7 +278,7 @@ a failure. This failure may be a result of duplicate entries specified in second argument, or a result of no available vector, or a result of failing to initialize MSI-X table entries. -5.3.5 API pci_disable_msix +5.3.3 API pci_disable_msix void pci_disable_msix(struct pci_dev *dev) @@ -349,7 +288,7 @@ always call free_irq() on all MSI-X vectors it has done request_irq() on before calling this API. Failure to do so results in a BUG_ON() and a device will be left with MSI-X enabled and leaks its vectors. -5.3.6 MSI-X mode vs. legacy mode diagram +5.3.4 MSI-X mode vs. legacy mode diagram The below diagram shows the events which switch the interrupt mode on the MSI-X capable device function between MSI-X mode and @@ -407,7 +346,7 @@ between MSI mod MSI-X mode during a run-time. MSI/MSI-X support requires support from both system hardware and individual hardware device functions. -5.5.1 System hardware support +5.5.1 Required x86 hardware support Since the target of MSI address is the local APIC CPU, enabling MSI/MSI-X support in the Linux kernel is dependent on whether existing diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 2c6a3b38967e..82e418d648d0 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -4,19 +4,29 @@ Booting - requirements for booting Interrupts - ARM Interrupt subsystem documentation +IXP2000 + - Release Notes for Linux on Intel's IXP2000 Network Processor Netwinder - Netwinder specific documentation +Porting + - Symbol definitions for porting Linux to a new ARM machine. +Setup + - Kernel initialization parameters on ARM Linux README - General ARM documentation -SA1100 +SA1100/ - SA1100 documentation -XScale - - XScale documentation -empeg - - Empeg documentation +Samsung-S3C24XX + - S3C24XX ARM Linux Overview +Sharp-LH + - Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC) +VFP/ + - Release notes for Linux Kernel Vector Floating Point support code +empeg/ + - Ltd's Empeg MP3 Car Audio Player mem_alignment - alignment abort handler documentation memory.txt - description of the virtual memory layout -nwfpe +nwfpe/ - NWFPE floating point emulator documentation diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX new file mode 100644 index 000000000000..961a0513f8c3 --- /dev/null +++ b/Documentation/block/00-INDEX @@ -0,0 +1,20 @@ +00-INDEX + - This file +as-iosched.txt + - Anticipatory IO scheduler +barrier.txt + - I/O Barriers +biodoc.txt + - Notes on the Generic Block Layer Rewrite in Linux 2.5 +capability.txt + - Generic Block Device Capability (/sys/block/<disk>/capability) +deadline-iosched.txt + - Deadline IO scheduler tunables +ioprio.txt + - Block io priorities (in CFQ scheduler) +request.txt + - The members of struct request (in include/linux/blkdev.h) +stat.txt + - Block layer statistics in /sys/block/<dev>/stat +switching-sched.txt + - Switching I/O schedulers at runtime diff --git a/Documentation/block/as-iosched.txt b/Documentation/block/as-iosched.txt index a598fe10a297..738b72be128e 100644 --- a/Documentation/block/as-iosched.txt +++ b/Documentation/block/as-iosched.txt @@ -20,15 +20,10 @@ actually has a head for each physical device in the logical RAID device. However, setting the antic_expire (see tunable parameters below) produces very similar behavior to the deadline IO scheduler. - Selecting IO schedulers ----------------------- -To choose IO schedulers at boot time, use the argument 'elevator=deadline'. -'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are -assigned globally at boot time only presently. It's also possible to change -the IO scheduler for a determined device on the fly, as described in -Documentation/block/switching-sched.txt. - +Refer to Documentation/block/switching-sched.txt for information on +selecting an io scheduler on a per-device basis. Anticipatory IO scheduler Policies ---------------------------------- @@ -115,7 +110,7 @@ statistics (average think time, average seek distance) on the process that submitted the just completed request are examined. If it seems likely that that process will submit another request soon, and that request is likely to be near the just completed request, then the IO -scheduler will stop dispatching more read requests for up time (antic_expire) +scheduler will stop dispatching more read requests for up to (antic_expire) milliseconds, hoping that process will submit a new request near the one that just completed. If such a request is made, then it is dispatched immediately. If the antic_expire wait time expires, then the IO scheduler @@ -165,3 +160,13 @@ The parameters are: for big seek time devices though not a linear correspondence - most processes have only a few ms thinktime. +In addition to the tunables above there is a read-only file named est_time +which, when read, will show: + + - The probability of a task exiting without a cooperating task + submitting an anticipated IO. + + - The current mean think time. + + - The seek distance used to determine if an incoming IO is better. + diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index dc3f49e3e539..93f223b9723f 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -2,7 +2,7 @@ ===================================================== Notes Written on Jan 15, 2002: - Jens Axboe <axboe@suse.de> + Jens Axboe <jens.axboe@oracle.com> Suparna Bhattacharya <suparna@in.ibm.com> Last Updated May 2, 2002 @@ -21,7 +21,7 @@ Credits: --------- 2.5 bio rewrite: - Jens Axboe <axboe@suse.de> + Jens Axboe <jens.axboe@oracle.com> Many aspects of the generic block layer redesign were driven by and evolved over discussions, prior patches and the collective experience of several diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt index be08ffd1e9b8..c23cab13c3d1 100644 --- a/Documentation/block/deadline-iosched.txt +++ b/Documentation/block/deadline-iosched.txt @@ -5,16 +5,10 @@ This little file attempts to document how the deadline io scheduler works. In particular, it will clarify the meaning of the exposed tunables that may be of interest to power users. -Each io queue has a set of io scheduler tunables associated with it. These -tunables control how the io scheduler works. You can find these entries -in: - -/sys/block/<device>/queue/iosched - -assuming that you have sysfs mounted on /sys. If you don't have sysfs mounted, -you can do so by typing: - -# mount none /sys -t sysfs +Selecting IO schedulers +----------------------- +Refer to Documentation/block/switching-sched.txt for information on +selecting an io scheduler on a per-device basis. ******************************************************************************** @@ -41,14 +35,11 @@ fifo_batch When a read request expires its deadline, we must move some requests from the sorted io scheduler list to the block device dispatch queue. fifo_batch -controls how many requests we move, based on the cost of each request. A -request is either qualified as a seek or a stream. The io scheduler knows -the last request that was serviced by the drive (or will be serviced right -before this one). See seek_cost and stream_unit. +controls how many requests we move. -write_starved (number of dispatches) -------------- +writes_starved (number of dispatches) +-------------- When we have to move requests from the io scheduler queue to the block device dispatch queue, we always give a preference to reads. However, we @@ -73,6 +64,6 @@ that comes at basically 0 cost we leave that on. We simply disable the rbtree front sector lookup when the io scheduler merge function is called. -Nov 11 2002, Jens Axboe <axboe@suse.de> +Nov 11 2002, Jens Axboe <jens.axboe@oracle.com> diff --git a/Documentation/block/ioprio.txt b/Documentation/block/ioprio.txt index 35e516b0b8a9..8ed8c59380b4 100644 --- a/Documentation/block/ioprio.txt +++ b/Documentation/block/ioprio.txt @@ -180,4 +180,4 @@ int main(int argc, char *argv[]) ---> snip ionice.c tool <--- -March 11 2005, Jens Axboe <axboe@suse.de> +March 11 2005, Jens Axboe <jens.axboe@oracle.com> diff --git a/Documentation/block/request.txt b/Documentation/block/request.txt index fff58acb40a3..754e104ed369 100644 --- a/Documentation/block/request.txt +++ b/Documentation/block/request.txt @@ -1,7 +1,7 @@ struct request documentation -Jens Axboe <axboe@suse.de> 27/05/02 +Jens Axboe <jens.axboe@oracle.com> 27/05/02 1.0 Index diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt index 5fa130a67531..634c952e1964 100644 --- a/Documentation/block/switching-sched.txt +++ b/Documentation/block/switching-sched.txt @@ -1,3 +1,18 @@ +To choose IO schedulers at boot time, use the argument 'elevator=deadline'. +'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are +assigned globally at boot time only presently. + +Each io queue has a set of io scheduler tunables associated with it. These +tunables control how the io scheduler works. You can find these entries +in: + +/sys/block/<device>/queue/iosched + +assuming that you have sysfs mounted on /sys. If you don't have sysfs mounted, +you can do so by typing: + +# mount none /sys -t sysfs + As of the Linux 2.6.10 kernel, it is now possible to change the IO scheduler for a given block device on the fly (thus making it possible, for instance, to set the CFQ scheduler for the system default, but @@ -20,3 +35,9 @@ noop anticipatory deadline [cfq] # echo anticipatory > /sys/block/hda/queue/scheduler # cat /sys/block/hda/queue/scheduler noop [anticipatory] deadline cfq + +Each io queue has a set of io scheduler tunables associated with it. These +tunables control how the io scheduler works. You can find these entries +in: + +/sys/block/<device>/queue/iosched diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt index 866b76139420..552cabac0608 100644 --- a/Documentation/cachetlb.txt +++ b/Documentation/cachetlb.txt @@ -133,12 +133,6 @@ changes occur: The ia64 sn2 platform is one example of a platform that uses this interface. -8) void lazy_mmu_prot_update(pte_t pte) - This interface is called whenever the protection on - any user PTEs change. This interface provides a notification - to architecture specific code to take appropriate action. - - Next, we have the cache flushing interfaces. In general, when Linux is changing an existing virtual-->physical mapping to a new value, the sequence will be in one of the following forms: diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index f2c0a6842930..ec9de6917f01 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -35,7 +35,8 @@ CONTENTS: ---------------------- Cpusets provide a mechanism for assigning a set of CPUs and Memory -Nodes to a set of tasks. +Nodes to a set of tasks. In this document "Memory Node" refers to +an on-line node that contains memory. Cpusets constrain the CPU and Memory placement of tasks to only the resources within a tasks current cpuset. They form a nested @@ -86,9 +87,6 @@ This can be especially valuable on: and a database), or * NUMA systems running large HPC applications with demanding performance characteristics. - * Also cpu_exclusive cpusets are useful for servers running orthogonal - workloads such as RT applications requiring low latency and HPC - applications that are throughput sensitive These subsets, or "soft partitions" must be able to be dynamically adjusted, as the job mix changes, without impacting other concurrently @@ -131,8 +129,6 @@ Cpusets extends these two mechanisms as follows: - A cpuset may be marked exclusive, which ensures that no other cpuset (except direct ancestors and descendents) may contain any overlapping CPUs or Memory Nodes. - Also a cpu_exclusive cpuset would be associated with a sched - domain. - You can list all the tasks (by pid) attached to any cpuset. The implementation of cpusets requires a few, simple hooks @@ -144,9 +140,6 @@ into the rest of the kernel, none in performance critical paths: allowed in that tasks cpuset. - in sched.c migrate_all_tasks(), to keep migrating tasks within the CPUs allowed by their cpuset, if possible. - - in sched.c, a new API partition_sched_domains for handling - sched domain changes associated with cpu_exclusive cpusets - and related changes in both sched.c and arch/ia64/kernel/domain.c - in the mbind and set_mempolicy system calls, to mask the requested Memory Nodes by what's allowed in that tasks cpuset. - in page_alloc.c, to restrict memory to allowed nodes. @@ -220,8 +213,8 @@ and name space for cpusets, with a minimum of additional kernel code. The cpus and mems files in the root (top_cpuset) cpuset are read-only. The cpus file automatically tracks the value of cpu_online_map using a CPU hotplug notifier, and the mems file -automatically tracks the value of node_online_map using the -cpuset_track_online_nodes() hook. +automatically tracks the value of node_states[N_MEMORY]--i.e., +nodes with memory--using the cpuset_track_online_nodes() hook. 1.4 What are exclusive cpusets ? @@ -231,15 +224,6 @@ If a cpuset is cpu or mem exclusive, no other cpuset, other than a direct ancestor or descendent, may share any of the same CPUs or Memory Nodes. -A cpuset that is cpu_exclusive has a scheduler (sched) domain -associated with it. The sched domain consists of all CPUs in the -current cpuset that are not part of any exclusive child cpusets. -This ensures that the scheduler load balancing code only balances -against the CPUs that are in the sched domain as defined above and -not all of the CPUs in the system. This removes any overhead due to -load balancing code trying to pull tasks outside of the cpu_exclusive -cpuset only to be prevented by the tasks' cpus_allowed mask. - A cpuset that is mem_exclusive restricts kernel allocations for page, buffer and other data commonly shared by the kernel across multiple users. All cpusets, whether mem_exclusive or not, restrict diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX index 92e89aeef52e..caabbd395e61 100644 --- a/Documentation/fb/00-INDEX +++ b/Documentation/fb/00-INDEX @@ -5,21 +5,49 @@ please mail me. 00-INDEX - this file +arkfb.txt + - info on the fbdev driver for ARK Logic chips. +aty128fb.txt + - info on the ATI Rage128 frame buffer driver. +cirrusfb.txt + - info on the driver for Cirrus Logic chipsets. +cyblafb/ + - directory with documentation files related to the cyblafb driver. +deferred_io.txt + - an introduction to deferred IO. +fbcon.txt + - intro to and usage guide for the framebuffer console (fbcon). framebuffer.txt - - introduction to frame buffer devices + - introduction to frame buffer devices. +imacfb.txt + - info on the generic EFI platform driver for Intel based Macs. +intel810.txt + - documentation for the Intel 810/815 framebuffer driver. +intelfb.txt + - docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver. internals.txt - - quick overview of frame buffer device internals + - quick overview of frame buffer device internals. +matroxfb.txt + - info on the Matrox framebuffer driver for Alpha, Intel and PPC. modedb.txt - - info on the video mode database -aty128fb.txt - - info on the ATI Rage128 frame buffer driver -clgenfb.txt - - info on the Cirrus Logic frame buffer driver + - info on the video mode database. matroxfb.txt - - info on the Matrox frame buffer driver + - info on the Matrox frame buffer driver. pvr2fb.txt - - info on the PowerVR 2 frame buffer driver + - info on the PowerVR 2 frame buffer driver. +pxafb.txt + - info on the driver for the PXA25x LCD controller. +s3fb.txt + - info on the fbdev driver for S3 Trio/Virge chips. +sa1100fb.txt + - information about the driver for the SA-1100 LCD controller. +sisfb.txt + - info on the framebuffer device driver for various SiS chips. +sstfb.txt + - info on the frame buffer driver for 3dfx' Voodoo Graphics boards. tgafb.txt - info on the TGA (DECChip 21030) frame buffer driver vesafb.txt - info on the VESA frame buffer device +vt8623fb.txt + - info on the fb driver for the graphics core in VIA VT8623 chipsets. diff --git a/Documentation/fb/uvesafb.txt b/Documentation/fb/uvesafb.txt new file mode 100644 index 000000000000..bcfc233a0080 --- /dev/null +++ b/Documentation/fb/uvesafb.txt @@ -0,0 +1,188 @@ + +uvesafb - A Generic Driver for VBE2+ compliant video cards +========================================================== + +1. Requirements +--------------- + +uvesafb should work with any video card that has a Video BIOS compliant +with the VBE 2.0 standard. + +Unlike other drivers, uvesafb makes use of a userspace helper called +v86d. v86d is used to run the x86 Video BIOS code in a simulated and +controlled environment. This allows uvesafb to function on arches other +than x86. Check the v86d documentation for a list of currently supported +arches. + +v86d source code can be downloaded from the following website: + http://dev.gentoo.org/~spock/projects/uvesafb + +Please refer to the v86d documentation for detailed configuration and +installation instructions. + +Note that the v86d userspace helper has to be available at all times in +order for uvesafb to work properly. If you want to use uvesafb during +early boot, you will have to include v86d into an initramfs image, and +either compile it into the kernel or use it as an initrd. + +2. Caveats and limitations +-------------------------- + +uvesafb is a _generic_ driver which supports a wide variety of video +cards, but which is ultimately limited by the Video BIOS interface. +The most important limitations are: + +- Lack of any type of acceleration. +- A strict and limited set of supported video modes. Often the native + or most optimal resolution/refresh rate for your setup will not work + with uvesafb, simply because the Video BIOS doesn't support the + video mode you want to use. This can be especially painful with + widescreen panels, where native video modes don't have the 4:3 aspect + ratio, which is what most BIOS-es are limited to. +- Adjusting the refresh rate is only possible with a VBE 3.0 compliant + Video BIOS. Note that many nVidia Video BIOS-es claim to be VBE 3.0 + compliant, while they simply ignore any refresh rate settings. + +3. Configuration +---------------- + +uvesafb can be compiled either as a module, or directly into the kernel. +In both cases it supports the same set of configuration options, which +are either given on the kernel command line or as module parameters, e.g.: + + video=uvesafb:1024x768-32,mtrr:3,ywrap (compiled into the kernel) + + # modprobe uvesafb mode=1024x768-32 mtrr=3 scroll=ywrap (module) + +Accepted options: + +ypan Enable display panning using the VESA protected mode + interface. The visible screen is just a window of the + video memory, console scrolling is done by changing the + start of the window. Available on x86 only. + +ywrap Same as ypan, but assumes your gfx board can wrap-around + the video memory (i.e. starts reading from top if it + reaches the end of video memory). Faster than ypan. + Available on x86 only. + +redraw Scroll by redrawing the affected part of the screen, this + is the safe (and slow) default. + +(If you're using uvesafb as a module, the above three options are + used a parameter of the scroll option, e.g. scroll=ypan.) + +vgapal Use the standard VGA registers for palette changes. + +pmipal Use the protected mode interface for palette changes. + This is the default if the protected mode interface is + available. Available on x86 only. + +mtrr:n Setup memory type range registers for the framebuffer + where n: + 0 - disabled (equivalent to nomtrr) (default) + 1 - uncachable + 2 - write-back + 3 - write-combining + 4 - write-through + + If you see the following in dmesg, choose the type that matches + the old one. In this example, use "mtrr:2". +... +mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining +... + +nomtrr Do not use memory type range registers. + +vremap:n + Remap 'n' MiB of video RAM. If 0 or not specified, remap memory + according to video mode. + +vtotal:n + If the video BIOS of your card incorrectly determines the total + amount of video RAM, use this option to override the BIOS (in MiB). + +<mode> The mode you want to set, in the standard modedb format. Refer to + modedb.txt for a detailed description. When uvesafb is compiled as + a module, the mode string should be provided as a value of the + 'mode' option. + +vbemode:x + Force the use of VBE mode x. The mode will only be set if it's + found in the VBE-provided list of supported modes. + NOTE: The mode number 'x' should be specified in VESA mode number + notation, not the Linux kernel one (eg. 257 instead of 769). + HINT: If you use this option because normal <mode> parameter does + not work for you and you use a X server, you'll probably want to + set the 'nocrtc' option to ensure that the video mode is properly + restored after console <-> X switches. + +nocrtc Do not use CRTC timings while setting the video mode. This option + has any effect only if the Video BIOS is VBE 3.0 compliant. Use it + if you have problems with modes set the standard way. Note that + using this option implies that any refresh rate adjustments will + be ignored and the refresh rate will stay at your BIOS default (60 Hz). + +noedid Do not try to fetch and use EDID-provided modes. + +noblank Disable hardware blanking. + +v86d:path + Set path to the v86d executable. This option is only available as + a module parameter, and not as a part of the video= string. If you + need to use it and have uvesafb built into the kernel, use + uvesafb.v86d="path". + +Additionally, the following parameters may be provided. They all override the +EDID-provided values and BIOS defaults. Refer to your monitor's specs to get +the correct values for maxhf, maxvf and maxclk for your hardware. + +maxhf:n Maximum horizontal frequency (in kHz). +maxvf:n Maximum vertical frequency (in Hz). +maxclk:n Maximum pixel clock (in MHz). + +4. The sysfs interface +---------------------- + +uvesafb provides several sysfs nodes for configurable parameters and +additional information. + +Driver attributes: + +/sys/bus/platform/drivers/uvesafb + - v86d (default: /sbin/v86d) + Path to the v86d executable. v86d is started by uvesafb + if an instance of the daemon isn't already running. + +Device attributes: + +/sys/bus/platform/drivers/uvesafb/uvesafb.0 + - nocrtc + Use the default refresh rate (60 Hz) if set to 1. + + - oem_product_name + - oem_product_rev + - oem_string + - oem_vendor + Information about the card and its maker. + + - vbe_modes + A list of video modes supported by the Video BIOS along with their + VBE mode numbers in hex. + + - vbe_version + A BCD value indicating the implemented VBE standard. + +5. Miscellaneous +---------------- + +Uvesafb will set a video mode with the default refresh rate and timings +from the Video BIOS if you set pixclock to 0 in fb_var_screeninfo. + + +-- + Michal Januszewski <spock@gentoo.org> + Last updated: 2007-06-16 + + Documentation of the uvesafb options is loosely based on vesafb.txt. + diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 63df2262d41a..fb8258ebc577 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -205,20 +205,6 @@ Who: Len Brown <len.brown@intel.com> --------------------------- -What: Compaq touchscreen device emulation -When: Oct 2007 -Files: drivers/input/tsdev.c -Why: The code says it was obsolete when it was written in 2001. - tslib is a userspace library which does anything tsdev can do and - much more besides in userspace where this code belongs. There is no - longer any need for tsdev and applications should have converted to - use tslib by now. - The name "tsdev" is also extremely confusing and lots of people have - it loaded when they don't need/use it. -Who: Richard Purdie <rpurdie@rpsys.net> - ---------------------------- - What: i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers When: September 2007 Why: Obsolete. The new i2c-gpio driver replaces all hardware-specific diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 59db1bca7027..599593a17067 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -52,6 +52,10 @@ isofs.txt - info and mount options for the ISO 9660 (CDROM) filesystem. jfs.txt - info and mount options for the JFS filesystem. +locks.txt + - info on file locking implementations, flock() vs. fcntl(), etc. +mandatory-locking.txt + - info on the Linux implementation of Sys V mandatory file locking. ncpfs.txt - info on Novell Netware(tm) filesystem using NCP protocol. ntfs.txt diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index f0f825808ca4..fe26cc978523 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -178,15 +178,18 @@ prototypes: locking rules: All except set_page_dirty may block - BKL PageLocked(page) + BKL PageLocked(page) i_sem writepage: no yes, unlocks (see below) readpage: no yes, unlocks sync_page: no maybe writepages: no set_page_dirty no no readpages: no -prepare_write: no yes -commit_write: no yes +prepare_write: no yes yes +commit_write: no yes yes +write_begin: no locks the page yes +write_end: no yes, unlocks yes +perform_write: no n/a yes bmap: yes invalidatepage: no yes releasepage: no yes diff --git a/Documentation/locks.txt b/Documentation/filesystems/locks.txt index e3b402ef33bd..fab857accbd6 100644 --- a/Documentation/locks.txt +++ b/Documentation/filesystems/locks.txt @@ -53,11 +53,11 @@ fcntl(), with all the problems that implies. 1.3 Mandatory Locking As A Mount Option --------------------------------------- -Mandatory locking, as described in 'Documentation/mandatory.txt' was prior -to this release a general configuration option that was valid for all -mounted filesystems. This had a number of inherent dangers, not the least -of which was the ability to freeze an NFS server by asking it to read a -file for which a mandatory lock existed. +Mandatory locking, as described in 'Documentation/filesystems/mandatory.txt' +was prior to this release a general configuration option that was valid for +all mounted filesystems. This had a number of inherent dangers, not the +least of which was the ability to freeze an NFS server by asking it to read +a file for which a mandatory lock existed. From this release of the kernel, mandatory locking can be turned on and off on a per-filesystem basis, using the mount options 'mand' and 'nomand'. diff --git a/Documentation/mandatory.txt b/Documentation/filesystems/mandatory-locking.txt index bc449d49eee5..0979d1d2ca8b 100644 --- a/Documentation/mandatory.txt +++ b/Documentation/filesystems/mandatory-locking.txt @@ -3,7 +3,26 @@ Andy Walker <andy@lysaker.kvaerner.no> 15 April 1996 - + (Updated September 2007) + +0. Why you should avoid mandatory locking +----------------------------------------- + +The Linux implementation is prey to a number of difficult-to-fix race +conditions which in practice make it not dependable: + + - The write system call checks for a mandatory lock only once + at its start. It is therefore possible for a lock request to + be granted after this check but before the data is modified. + A process may then see file data change even while a mandatory + lock was held. + - Similarly, an exclusive lock may be granted on a file after + the kernel has decided to proceed with a read, but before the + read has actually completed, and the reading process may see + the file data in a state which should not have been visible + to it. + - Similar races make the claimed mutual exclusion between lock + and mmap similarly unreliable. 1. What is mandatory locking? ------------------------------ diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index 8ee10ec88293..e79ee2db183a 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -407,7 +407,7 @@ raiddev /dev/md0 device /dev/hda5 raid-disk 0 device /dev/hdb1 - raid-disl 1 + raid-disk 1 For linear raid, just change the raid-level above to "raid-level linear", for mirrors, change it to "raid-level 1", and for stripe sets with parity, change @@ -457,6 +457,8 @@ ChangeLog Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog. +2.1.29: + - Fix a deadlock when mounting read-write. 2.1.28: - Fix a deadlock. 2.1.27: diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 045f3e055a28..6f8e16e3d6c0 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -537,6 +537,12 @@ struct address_space_operations { struct list_head *pages, unsigned nr_pages); int (*prepare_write)(struct file *, struct page *, unsigned, unsigned); int (*commit_write)(struct file *, struct page *, unsigned, unsigned); + int (*write_begin)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned flags, + struct page **pagep, void **fsdata); + int (*write_end)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata); sector_t (*bmap)(struct address_space *, sector_t); int (*invalidatepage) (struct page *, unsigned long); int (*releasepage) (struct page *, int); @@ -615,11 +621,7 @@ struct address_space_operations { any basic-blocks on storage, then those blocks should be pre-read (if they haven't been read already) so that the updated blocks can be written out properly. - The page will be locked. If prepare_write wants to unlock the - page it, like readpage, may do so and return - AOP_TRUNCATED_PAGE. - In this case the prepare_write will be retried one the lock is - regained. + The page will be locked. Note: the page _must not_ be marked uptodate in this function (or anywhere else) unless it actually is uptodate right now. As @@ -633,6 +635,45 @@ struct address_space_operations { operations. It should avoid returning an error if possible - errors should have been handled by prepare_write. + write_begin: This is intended as a replacement for prepare_write. The + key differences being that: + - it returns a locked page (in *pagep) rather than being + given a pre locked page; + - it must be able to cope with short writes (where the + length passed to write_begin is greater than the number + of bytes copied into the page). + + Called by the generic buffered write code to ask the filesystem to + prepare to write len bytes at the given offset in the file. The + address_space should check that the write will be able to complete, + by allocating space if necessary and doing any other internal + housekeeping. If the write will update parts of any basic-blocks on + storage, then those blocks should be pre-read (if they haven't been + read already) so that the updated blocks can be written out properly. + + The filesystem must return the locked pagecache page for the specified + offset, in *pagep, for the caller to write into. + + flags is a field for AOP_FLAG_xxx flags, described in + include/linux/fs.h. + + A void * may be returned in fsdata, which then gets passed into + write_end. + + Returns 0 on success; < 0 on failure (which is the error code), in + which case write_end is not called. + + write_end: After a successful write_begin, and data copy, write_end must + be called. len is the original len passed to write_begin, and copied + is the amount that was able to be copied (copied == len is always true + if write_begin was called with the AOP_FLAG_UNINTERRUPTIBLE flag). + + The filesystem must take care of unlocking the page and releasing it + refcount, and updating i_size. + + Returns < 0 on failure, otherwise the number of bytes (<= 'copied') + that were able to be copied into pagecache. + bmap: called by the VFS to map a logical block offset within object to physical block number. This method is used by the FIBMAP ioctl and for working with swap-files. To be able to swap to diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index 870cda9416e9..170bf862437b 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -4,7 +4,7 @@ Kernel driver coretemp Supported chips: * All Intel Core family Prefix: 'coretemp' - CPUID: family 0x6, models 0xe, 0xf + CPUID: family 0x6, models 0xe, 0xf, 0x16 Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3A: System Programming Guide diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 1a0f3d64ab80..8f446070e64a 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -6,6 +6,10 @@ Supported chips: Prefix: 'dme1737' Addresses scanned: I2C 0x2c, 0x2d, 0x2e Datasheet: Provided by SMSC upon request and under NDA + * SMSC SCH3112, SCH3114, SCH3116 + Prefix: 'sch311x' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf Authors: Juerg Haefliger <juergh@gmail.com> @@ -27,16 +31,25 @@ Description ----------- This driver implements support for the hardware monitoring capabilities of the -SMSC DME1737 and Asus A8000 (which are the same) Super-I/O chips. This chip -features monitoring of 3 temp sensors temp[1-3] (2 remote diodes and 1 -internal), 7 voltages in[0-6] (6 external and 1 internal) and 6 fan speeds -fan[1-6]. Additionally, the chip implements 5 PWM outputs pwm[1-3,5-6] for -controlling fan speeds both manually and automatically. - -Fan[3-6] and pwm[3,5-6] are optional features and their availability is -dependent on the configuration of the chip. The driver will detect which -features are present during initialization and create the sysfs attributes -accordingly. +SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O +chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote +diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up +to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM +outputs pwm[1-3,5-6] for controlling fan speeds both manually and +automatically. + +For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6] +and pwm[3,5-6] are optional features and their availability depends on the +configuration of the chip. The driver will detect which features are present +during initialization and create the sysfs attributes accordingly. + +For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and +pwm[5-6] don't exist. + +The hardware monitoring features of the DME1737 and A8000 are only accessible +via SMBus, while the SCH311x only provides access via the ISA bus. The driver +will therefore register itself as an I2C client driver if it detects a DME1737 +or A8000 and as a platform driver if it detects a SCH311x chip. Voltage Monitoring diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f index 94e0d2cbd3d2..f0d55976740a 100644 --- a/Documentation/hwmon/f71805f +++ b/Documentation/hwmon/f71805f @@ -6,6 +6,10 @@ Supported chips: Prefix: 'f71805f' Addresses scanned: none, address read from Super I/O config space Datasheet: Available from the Fintek website + * Fintek F71806F/FG + Prefix: 'f71872f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website * Fintek F71872F/FG Prefix: 'f71872f' Addresses scanned: none, address read from Super I/O config space @@ -38,6 +42,9 @@ The Fintek F71872F/FG Super I/O chip is almost the same, with two additional internal voltages monitored (VSB and battery). It also features 6 VID inputs. The VID inputs are not yet supported by this driver. +The Fintek F71806F/FG Super-I/O chip is essentially the same as the +F71872F/FG, and is undistinguishable therefrom. + The driver assumes that no more than one chip is present, which seems reasonable. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 81ecc7e41c50..5b704a40256b 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -90,7 +90,8 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. The IT8716F, IT8718F and later IT8712F revisions have support for -2 additional fans. They are not yet supported by the driver. +2 additional fans. They are supported by the driver for the IT8716F and +IT8718F but not for the IT8712F The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This is better (no more fan diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78 index fd5dc7a19f0e..dfc318a60fd4 100644 --- a/Documentation/hwmon/lm78 +++ b/Documentation/hwmon/lm78 @@ -56,16 +56,6 @@ should work with. This is hardcoded by the mainboard and/or processor itself. It is a value in volts. When it is unconnected, you will often find the value 3.50 V here. -In addition to the alarms described above, there are a couple of additional -ones. There is a BTI alarm, which gets triggered when an external chip has -crossed its limits. Usually, this is connected to all LM75 chips; if at -least one crosses its limits, this bit gets set. The CHAS alarm triggers -if your computer case is open. The FIFO alarms should never trigger; it -indicates an internal error. The SMI_IN alarm indicates some other chip -has triggered an SMI interrupt. As we do not use SMI interrupts at all, -this condition usually indicates there is a problem with some other -device. - If an alarm triggers, it will remain triggered until the hardware register is read at least once. This means that the cause for the alarm may already have disappeared! Note that in the current implementation, all diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93 index 4e4a1dc1d2da..ac711f357faf 100644 --- a/Documentation/hwmon/lm93 +++ b/Documentation/hwmon/lm93 @@ -7,7 +7,7 @@ Supported chips: Addresses scanned: I2C 0x2c-0x2e Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf -Author: +Authors: Mark M. Hoffman <mhoffman@lightlink.com> Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com> Adapted to 2.6.20 by Carsten Emde <ce@osadl.org> @@ -16,7 +16,6 @@ Author: Module Parameters ----------------- -(specific to LM93) * init: integer Set to non-zero to force some initializations (default is 0). * disable_block: integer @@ -37,30 +36,13 @@ Module Parameters I.e. this parameter controls the VID pin input thresholds; if your VID inputs are not working, try changing this. The default value is "0". -(common among sensor drivers) -* force: short array (min = 1, max = 48) - List of adapter,address pairs to assume to be present. Autodetection - of the target device will still be attempted. Use one of the more - specific force directives below if this doesn't detect the device. -* force_lm93: short array (min = 1, max = 48) - List of adapter,address pairs which are unquestionably assumed to contain - a 'lm93' chip -* ignore: short array (min = 1, max = 48) - List of adapter,address pairs not to scan -* ignore_range: short array (min = 1, max = 48) - List of adapter,start-addr,end-addr triples not to scan -* probe: short array (min = 1, max = 48) - List of adapter,address pairs to scan additionally -* probe_range: short array (min = 1, max = 48) - List of adapter,start-addr,end-addr triples to scan additionally - Hardware Description -------------------- (from the datasheet) -The LM93, hardware monitor, has a two wire digital interface compatible with +The LM93 hardware monitor has a two wire digital interface compatible with SMBus 2.0. Using an 8-bit ADC, the LM93 measures the temperature of two remote diode connected transistors as well as its own die and 16 power supply voltages. To set fan speed, the LM93 has two PWM outputs that are each @@ -69,18 +51,12 @@ table based. The LM93 includes a digital filter that can be invoked to smooth temperature readings for better control of fan speed. The LM93 has four tachometer inputs to measure fan speed. Limit and status registers for all measured values are included. The LM93 builds upon the functionality of -previous motherboard management ASICs and uses some of the LM85 s features +previous motherboard management ASICs and uses some of the LM85's features (i.e. smart tachometer mode). It also adds measurement and control support for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual processor Xeon class motherboard with a minimum of external components. -Driver Description ------------------- - -This driver implements support for the National Semiconductor LM93. - - User Interface -------------- @@ -101,7 +77,7 @@ These intervals can be found in the sysfs files prochot1_interval and prochot2_interval. The values in these files specify the intervals for #P1_PROCHOT and #P2_PROCHOT, respectively. Selecting a value not in this list will cause the driver to use the next largest interval. The available -intervals are: +intervals are (in seconds): #PROCHOT intervals: 0.73, 1.46, 2.9, 5.8, 11.7, 23.3, 46.6, 93.2, 186, 372 @@ -111,12 +87,12 @@ assert #P2_PROCHOT, and vice-versa. This mode is enabled by writing a non-zero integer to the sysfs file prochot_short. The LM93 can also override the #PROCHOT pins by driving a PWM signal onto -one or both of them. When overridden, the signal has a period of 3.56 mS, +one or both of them. When overridden, the signal has a period of 3.56 ms, a minimum pulse width of 5 clocks (at 22.5kHz => 6.25% duty cycle), and a maximum pulse width of 80 clocks (at 22.5kHz => 99.88% duty cycle). The sysfs files prochot1_override and prochot2_override contain boolean -intgers which enable or disable the override function for #P1_PROCHOT and +integers which enable or disable the override function for #P1_PROCHOT and #P2_PROCHOT, respectively. The sysfs file prochot_override_duty_cycle contains a value controlling the duty cycle for the PWM signal used when the override function is enabled. This value ranges from 0 to 15, with 0 @@ -166,7 +142,7 @@ frequency values are constrained by the hardware. Selecting a value which is not available will cause the driver to use the next largest value. Also note that this parameter has implications for the Smart Tach Mode (see above). -PWM Output Frequencies: 12, 36, 48, 60, 72, 84, 96, 22500 (h/w default) +PWM Output Frequencies (in Hz): 12, 36, 48, 60, 72, 84, 96, 22500 (default) Automatic PWM: @@ -178,7 +154,7 @@ individual control sources to which the PWM output is bound. The eight control sources are: temp1-temp4 (aka "zones" in the datasheet), #PROCHOT 1 & 2, and #VRDHOT 1 & 2. The bindings are expressed as a bitmask in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and - a "0" disables it. The h/w default is 0x0f (all temperatures bound). +a "0" disables it. The h/w default is 0x0f (all temperatures bound). 0x01 - Temp 1 0x02 - Temp 2 @@ -324,89 +300,3 @@ LM93 Unique sysfs Files gpio input state of 8 GPIO pins; read-only - -Sample Configuration File -------------------------- - -Here is a sample LM93 chip config for sensors.conf: - ----------- cut here ---------- -chip "lm93-*" - -# VOLTAGE INPUTS - - # labels and scaling based on datasheet recommendations - label in1 "+12V1" - compute in1 @ * 12.945, @ / 12.945 - set in1_min 12 * 0.90 - set in1_max 12 * 1.10 - - label in2 "+12V2" - compute in2 @ * 12.945, @ / 12.945 - set in2_min 12 * 0.90 - set in2_max 12 * 1.10 - - label in3 "+12V3" - compute in3 @ * 12.945, @ / 12.945 - set in3_min 12 * 0.90 - set in3_max 12 * 1.10 - - label in4 "FSB_Vtt" - - label in5 "3GIO" - - label in6 "ICH_Core" - - label in7 "Vccp1" - - label in8 "Vccp2" - - label in9 "+3.3V" - set in9_min 3.3 * 0.90 - set in9_max 3.3 * 1.10 - - label in10 "+5V" - set in10_min 5.0 * 0.90 - set in10_max 5.0 * 1.10 - - label in11 "SCSI_Core" - - label in12 "Mem_Core" - - label in13 "Mem_Vtt" - - label in14 "Gbit_Core" - - # Assuming R1/R2 = 4.1143, and 3.3V reference - # -12V = (4.1143 + 1) * (@ - 3.3) + 3.3 - label in15 "-12V" - compute in15 @ * 5.1143 - 13.57719, (@ + 13.57719) / 5.1143 - set in15_min -12 * 0.90 - set in15_max -12 * 1.10 - - label in16 "+3.3VSB" - set in16_min 3.3 * 0.90 - set in16_max 3.3 * 1.10 - -# TEMPERATURE INPUTS - - label temp1 "CPU1" - label temp2 "CPU2" - label temp3 "LM93" - -# TACHOMETER INPUTS - - label fan1 "Fan1" - set fan1_min 3000 - label fan2 "Fan2" - set fan2_min 3000 - label fan3 "Fan3" - set fan3_min 3000 - label fan4 "Fan4" - set fan4_min 3000 - -# PWM OUTPUTS - - label pwm1 "CPU1" - label pwm2 "CPU2" - diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index b3a9e1b9dbda..a17b692d2679 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -67,6 +67,10 @@ between readings to be caught and alarmed. The exact definition of an alarm (for example, whether a threshold must be met or must be exceeded to cause an alarm) is chip-dependent. +When setting values of hwmon sysfs attributes, the string representation of +the desired value must be written, note that strings which are not a number +are interpreted as 0! For more on how written strings are interpreted see the +"sysfs attribute writes interpretation" section at the end of this file. ------------------------------------------------------------------------- @@ -78,8 +82,21 @@ RW read/write value Read/write values may be read-only for some chips, depending on the hardware implementation. -All entries are optional, and should only be created in a given driver -if the chip has the feature. +All entries (except name) are optional, and should only be created in a +given driver if the chip has the feature. + + +******** +* Name * +******** + +name The chip name. + This should be a short, lowercase string, not containing + spaces nor dashes, representing the chip name. This is + the only mandatory attribute. + I2C devices get this attribute created automatically. + RO + ************ * Voltages * @@ -104,18 +121,17 @@ in[0-*]_input Voltage input value. by the chip driver, and must be done by the application. However, some drivers (notably lm87 and via686a) do scale, because of internal resistors built into a chip. - These drivers will output the actual voltage. - - Typical usage: - in0_* CPU #1 voltage (not scaled) - in1_* CPU #2 voltage (not scaled) - in2_* 3.3V nominal (not scaled) - in3_* 5.0V nominal (scaled) - in4_* 12.0V nominal (scaled) - in5_* -12.0V nominal (scaled) - in6_* -5.0V nominal (scaled) - in7_* varies - in8_* varies + These drivers will output the actual voltage. Rule of + thumb: drivers should report the voltage values at the + "pins" of the chip. + +in[0-*]_label Suggested voltage channel label. + Text string + Should only be created if the driver has hints about what + this voltage channel is being used for, and user-space + doesn't. In all other cases, the label is provided by + user-space. + RO cpu[0-*]_vid CPU core reference voltage. Unit: millivolt @@ -159,6 +175,13 @@ fan[1-*]_target Only makes sense if the chip supports closed-loop fan speed control based on the measured fan speed. +fan[1-*]_label Suggested fan channel label. + Text string + Should only be created if the driver has hints about what + this fan channel is being used for, and user-space doesn't. + In all other cases, the label is provided by user-space. + RO + Also see the Alarms section for status flags associated with fans. @@ -219,12 +242,12 @@ temp[1-*]_auto_point[1-*]_temp_hyst **************** temp[1-*]_type Sensor type selection. - Integers 1 to 6 or thermistor Beta value (typically 3435) + Integers 1 to 6 RW 1: PII/Celeron Diode 2: 3904 transistor 3: thermal diode - 4: thermistor (default/unknown Beta) + 4: thermistor 5: AMD AMDSI 6: Intel PECI Not all types are supported by all chips @@ -260,18 +283,19 @@ temp[1-*]_crit_hyst from the critical value. RW -temp[1-4]_offset +temp[1-*]_offset Temperature offset which is added to the temperature reading by the chip. Unit: millidegree Celsius Read/Write value. - If there are multiple temperature sensors, temp1_* is - generally the sensor inside the chip itself, - reported as "motherboard temperature". temp2_* to - temp4_* are generally sensors external to the chip - itself, for example the thermal diode inside the CPU or - a thermistor nearby. +temp[1-*]_label Suggested temperature channel label. + Text string + Should only be created if the driver has hints about what + this temperature channel is being used for, and user-space + doesn't. In all other cases, the label is provided by + user-space. + RO Some chips measure temperature using external thermistors and an ADC, and report the temperature measurement as a voltage. Converting this voltage @@ -393,14 +417,53 @@ beep_mask Bitmask for beep. RW -********* -* Other * -********* - -eeprom Raw EEPROM data in binary form. - RO - -pec Enable or disable PEC (SMBus only) - 0: disable - 1: enable - RW +sysfs attribute writes interpretation +------------------------------------- + +hwmon sysfs attributes always contain numbers, so the first thing to do is to +convert the input to a number, there are 2 ways todo this depending whether +the number can be negative or not: +unsigned long u = simple_strtoul(buf, NULL, 10); +long s = simple_strtol(buf, NULL, 10); + +With buf being the buffer with the user input being passed by the kernel. +Notice that we do not use the second argument of strto[u]l, and thus cannot +tell when 0 is returned, if this was really 0 or is caused by invalid input. +This is done deliberately as checking this everywhere would add a lot of +code to the kernel. + +Notice that it is important to always store the converted value in an +unsigned long or long, so that no wrap around can happen before any further +checking. + +After the input string is converted to an (unsigned) long, the value should be +checked if its acceptable. Be careful with further conversions on the value +before checking it for validity, as these conversions could still cause a wrap +around before the check. For example do not multiply the result, and only +add/subtract if it has been divided before the add/subtract. + +What to do if a value is found to be invalid, depends on the type of the +sysfs attribute that is being set. If it is a continuous setting like a +tempX_max or inX_max attribute, then the value should be clamped to its +limits using SENSORS_LIMIT(value, min_limit, max_limit). If it is not +continuous like for example a tempX_type, then when an invalid value is +written, -EINVAL should be returned. + +Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees): + + long v = simple_strtol(buf, NULL, 10) / 1000; + v = SENSORS_LIMIT(v, -128, 127); + /* write v to register */ + +Example2, fan divider setting, valid values 2, 4 and 8: + + unsigned long v = simple_strtoul(buf, NULL, 10); + + switch (v) { + case 2: v = 1; break; + case 4: v = 2; break; + case 8: v = 3; break; + default: + return -EINVAL; + } + /* write v to register */ diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index db9881df88a5..f153b2f6d62c 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -75,46 +75,64 @@ Voltage sensors (also known as IN sensors) report their values in millivolts. An alarm is triggered if the voltage has crossed a programmable minimum or maximum limit. -The bit ordering for the alarm "realtime status register" and the -"beep enable registers" are different. - -in0 (VCORE) : alarms: 0x000001 beep_enable: 0x000001 -in1 (VINR0) : alarms: 0x000002 beep_enable: 0x002000 <== mismatch -in2 (+3.3VIN): alarms: 0x000004 beep_enable: 0x000004 -in3 (5VDD) : alarms: 0x000008 beep_enable: 0x000008 -in4 (+12VIN) : alarms: 0x000100 beep_enable: 0x000100 -in5 (-12VIN) : alarms: 0x000200 beep_enable: 0x000200 -in6 (-5VIN) : alarms: 0x000400 beep_enable: 0x000400 -in7 (VSB) : alarms: 0x080000 beep_enable: 0x010000 <== mismatch -in8 (VBAT) : alarms: 0x100000 beep_enable: 0x020000 <== mismatch -in9 (VINR1) : alarms: 0x004000 beep_enable: 0x004000 -temp1 : alarms: 0x000010 beep_enable: 0x000010 -temp2 : alarms: 0x000020 beep_enable: 0x000020 -temp3 : alarms: 0x002000 beep_enable: 0x000002 <== mismatch -fan1 : alarms: 0x000040 beep_enable: 0x000040 -fan2 : alarms: 0x000080 beep_enable: 0x000080 -fan3 : alarms: 0x000800 beep_enable: 0x000800 -fan4 : alarms: 0x200000 beep_enable: 0x200000 -fan5 : alarms: 0x400000 beep_enable: 0x400000 -tart1 : alarms: 0x010000 beep_enable: 0x040000 <== mismatch -tart2 : alarms: 0x020000 beep_enable: 0x080000 <== mismatch -tart3 : alarms: 0x040000 beep_enable: 0x100000 <== mismatch -case_open : alarms: 0x001000 beep_enable: 0x001000 -user_enable : alarms: -------- beep_enable: 0x800000 - -*** NOTE: It is the responsibility of user-space code to handle the fact -that the beep enable and alarm bits are in different positions when using that -feature of the chip. - -When an alarm goes off, you can be warned by a beeping signal through your -computer speaker. It is possible to enable all beeping globally, or only -the beeping for some alarms. - -The driver only reads the chip values each 3 seconds; reading them more -often will do no harm, but will return 'old' values. +The w83791d has a global bit used to enable beeping from the speaker when an +alarm is triggered as well as a bitmask to enable or disable the beep for +specific alarms. You need both the global beep enable bit and the +corresponding beep bit to be on for a triggered alarm to sound a beep. + +The sysfs interface to the gloabal enable is via the sysfs beep_enable file. +This file is used for both legacy and new code. + +The sysfs interface to the beep bitmask has migrated from the original legacy +method of a single sysfs beep_mask file to a newer method using multiple +*_beep files as described in .../Documentation/hwmon/sysfs-interface. + +A similar change has occured for the bitmap corresponding to the alarms. The +original legacy method used a single sysfs alarms file containing a bitmap +of triggered alarms. The newer method uses multiple sysfs *_alarm files +(again following the pattern described in sysfs-interface). + +Since both methods read and write the underlying hardware, they can be used +interchangeably and changes in one will automatically be reflected by +the other. If you use the legacy bitmask method, your user-space code is +responsible for handling the fact that the alarms and beep_mask bitmaps +are not the same (see the table below). + +NOTE: All new code should be written to use the newer sysfs-interface +specification as that avoids bitmap problems and is the preferred interface +going forward. + +The driver reads the hardware chip values at most once every three seconds. +User mode code requesting values more often will receive cached values. + +Alarms bitmap vs. beep_mask bitmask +------------------------------------ +For legacy code using the alarms and beep_mask files: + +in0 (VCORE) : alarms: 0x000001 beep_mask: 0x000001 +in1 (VINR0) : alarms: 0x000002 beep_mask: 0x002000 <== mismatch +in2 (+3.3VIN): alarms: 0x000004 beep_mask: 0x000004 +in3 (5VDD) : alarms: 0x000008 beep_mask: 0x000008 +in4 (+12VIN) : alarms: 0x000100 beep_mask: 0x000100 +in5 (-12VIN) : alarms: 0x000200 beep_mask: 0x000200 +in6 (-5VIN) : alarms: 0x000400 beep_mask: 0x000400 +in7 (VSB) : alarms: 0x080000 beep_mask: 0x010000 <== mismatch +in8 (VBAT) : alarms: 0x100000 beep_mask: 0x020000 <== mismatch +in9 (VINR1) : alarms: 0x004000 beep_mask: 0x004000 +temp1 : alarms: 0x000010 beep_mask: 0x000010 +temp2 : alarms: 0x000020 beep_mask: 0x000020 +temp3 : alarms: 0x002000 beep_mask: 0x000002 <== mismatch +fan1 : alarms: 0x000040 beep_mask: 0x000040 +fan2 : alarms: 0x000080 beep_mask: 0x000080 +fan3 : alarms: 0x000800 beep_mask: 0x000800 +fan4 : alarms: 0x200000 beep_mask: 0x200000 +fan5 : alarms: 0x400000 beep_mask: 0x400000 +tart1 : alarms: 0x010000 beep_mask: 0x040000 <== mismatch +tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch +tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch +case_open : alarms: 0x001000 beep_mask: 0x001000 +global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable) W83791D TODO: --------------- -Provide a patch for per-file alarms and beep enables as defined in the hwmon - documentation (Documentation/hwmon/sysfs-interface) Provide a patch for smart-fan control (still need appropriate motherboard/fans) diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index fe6406f2f9a6..fde4420e3f75 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -13,7 +13,8 @@ Supported adapters: * Intel 631xESB/632xESB (ESB2) * Intel 82801H (ICH8) * Intel ICH9 - Datasheets: Publicly available at the Intel website + * Intel Tolapai + Datasheets: Publicly available at the Intel website Authors: Frodo Looijaard <frodol@dds.nl>, diff --git a/Documentation/i2c/chips/pcf8574 b/Documentation/i2c/chips/pcf8574 index 2752c8ce3167..5c1ad1376b62 100644 --- a/Documentation/i2c/chips/pcf8574 +++ b/Documentation/i2c/chips/pcf8574 @@ -62,8 +62,6 @@ if the corresponding output is set as 1, otherwise the current output value, that is to say 0. The write file is read/write. Writing a value outputs it on the I/O -port. Reading returns the last written value. - -On module initialization the chip is configured as eight inputs (all -outputs to 1), so you can connect any circuit to the PCF8574(A) without -being afraid of short-circuit. +port. Reading returns the last written value. As it is not possible +to read this value from the chip, you need to write at least once to +this file before you can read back from it. diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface index b849ad636583..9dd79123ddd9 100644 --- a/Documentation/i2c/dev-interface +++ b/Documentation/i2c/dev-interface @@ -90,12 +90,15 @@ ioctl(file,I2C_SLAVE,long addr) ioctl(file,I2C_TENBIT,long select) Selects ten bit addresses if select not equals 0, selects normal 7 bit - addresses if select equals 0. Default 0. + addresses if select equals 0. Default 0. This request is only valid + if the adapter has I2C_FUNC_10BIT_ADDR. ioctl(file,I2C_PEC,long select) Selects SMBus PEC (packet error checking) generation and verification if select not equals 0, disables if select equals 0. Default 0. - Used only for SMBus transactions. + Used only for SMBus transactions. This request only has an effect if the + the adapter has I2C_FUNC_SMBUS_PEC; it is still safe if not, it just + doesn't have any effect. ioctl(file,I2C_FUNCS,unsigned long *funcs) Gets the adapter functionality and puts it in *funcs. @@ -103,8 +106,10 @@ ioctl(file,I2C_FUNCS,unsigned long *funcs) ioctl(file,I2C_RDWR,struct i2c_rdwr_ioctl_data *msgset) Do combined read/write transaction without stop in between. - The argument is a pointer to a struct i2c_rdwr_ioctl_data { + Only valid if the adapter has I2C_FUNC_I2C. The argument is + a pointer to a + struct i2c_rdwr_ioctl_data { struct i2c_msg *msgs; /* ptr to array of simple messages */ int nmsgs; /* number of messages to exchange */ } diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub index 9cc081e69764..89e69ad3436c 100644 --- a/Documentation/i2c/i2c-stub +++ b/Documentation/i2c/i2c-stub @@ -6,13 +6,14 @@ This module is a very simple fake I2C/SMBus driver. It implements four types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, and (r/w) word data. -You need to provide a chip address as a module parameter when loading -this driver, which will then only react to SMBus commands to this address. +You need to provide chip addresses as a module parameter when loading this +driver, which will then only react to SMBus commands to these addresses. No hardware is needed nor associated with this module. It will accept write -quick commands to one address; it will respond to the other commands (also -to one address) by reading from or writing to an array in memory. It will -also spam the kernel logs for every command it handles. +quick commands to the specified addresses; it will respond to the other +commands (also to the specified addresses) by reading from or writing to +arrays in memory. It will also spam the kernel logs for every command it +handles. A pointer register with auto-increment is implemented for all byte operations. This allows for continuous byte reads like those supported by @@ -26,8 +27,8 @@ The typical use-case is like this: PARAMETERS: -int chip_addr: - The SMBus address to emulate a chip at. +int chip_addr[10]: + The SMBus addresses to emulate chips at. CAVEATS: @@ -41,9 +42,6 @@ If the hardware for your driver has banked registers (e.g. Winbond sensors chips) this module will not work well - although it could be extended to support that pretty easily. -Only one chip address is supported - although this module could be -extended to support more. - If you spam it hard enough, printk can be lossy. This module really wants something like relayfs. diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO index 9f08dab1e75b..d9d832c010ef 100644 --- a/Documentation/ja_JP/HOWTO +++ b/Documentation/ja_JP/HOWTO @@ -1,4 +1,4 @@ -NOTE: +NOTE: This is a version of Documentation/HOWTO translated into Japanese. This document is maintained by Tsugikazu Shibata <tshibata@ab.jp.nec.com> and the JF Project team <www.linux.or.jp/JF>. @@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a fork. So if you have any comments or updates for this file, please try to update the original English file first. -Last Updated: 2007/07/18 +Last Updated: 2007/09/23 ================================== ã“ã‚Œã¯ã€ -linux-2.6.22/Documentation/HOWTO +linux-2.6.23/Documentation/HOWTO ã®å’Œè¨³ã§ã™ã€‚ 翻訳団体： JF プãƒã‚¸ã‚§ã‚¯ãƒˆ < http://www.linux.or.jp/JF/ > -翻訳日： 2007/07/16 +翻訳日： 2007/09/19 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com> æ ¡æ£è€…： æ¾å€‰ã•ã‚“ <nbh--mats at nifty dot com> å°æž— é›…å…¸ã•ã‚“ (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp> @@ -27,6 +27,7 @@ linux-2.6.22/Documentation/HOWTO 野å£ã•ã‚“ (Kenji Noguchi) <tokyo246 at gmail dot com> 河内ã•ã‚“ (Takayoshi Kochi) <t-kochi at bq dot jp dot nec dot com> 岩本ã•ã‚“ (iwamoto) <iwamoto.kn at ncos dot nec dot co dot jp> + 内田ã•ã‚“ (Satoshi Uchida) <s-uchida at ap dot jp dot nec dot com> ================================== Linux カーãƒãƒ«é–‹ç™ºã®ã‚„ã‚Šæ–¹ @@ -40,7 +41,7 @@ Linux カーãƒãƒ«é–‹ç™ºã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¨å…±ã«æ´»å‹•ã™ã‚‹ã‚„り方をå¦ã 手助ã‘ã«ãªã‚Šã¾ã™ã€‚ ã‚‚ã—ã€ã“ã®ãƒ‰ã‚ュメントã®ã©ã“ã‹ãŒå¤ããªã£ã¦ã„ãŸå ´åˆã«ã¯ã€ã“ã®ãƒ‰ã‚ュメン -トã®æœ€å¾Œã«ãƒªã‚¹ãƒˆã—ãŸãƒ¡ãƒ³ãƒ†ãƒŠãƒ¼ã«ãƒ‘ッãƒã‚’é€ã£ã¦ãã ã•ã„。 +トã®æœ€å¾Œã«ãƒªã‚¹ãƒˆã—ãŸãƒ¡ãƒ³ãƒ†ãƒŠã«ãƒ‘ッãƒã‚’é€ã£ã¦ãã ã•ã„。 ã¯ã˜ã‚ã« --------- @@ -59,7 +60,7 @@ Linux カーãƒãƒ«é–‹ç™ºã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¨å…±ã«æ´»å‹•ã™ã‚‹ã‚„り方をå¦ã ãƒãƒ«é–‹ç™ºè€…ã«ã¯å¿…è¦ã§ã™ã€‚アーã‚テクãƒãƒ£å‘ã‘ã®ä½Žãƒ¬ãƒ™ãƒ«éƒ¨åˆ†ã®é–‹ç™ºã‚’ã™ã‚‹ã® ã§ãªã‘ã‚Œã°ã€(ã©ã‚“ãªã‚¢ãƒ¼ã‚テクãƒãƒ£ã§ã‚‚)アセンブリ(訳注: 言語)ã¯å¿…è¦ã‚ã‚Š ã¾ã›ã‚“。以下ã®æœ¬ã¯ã€C 言語ã®å分ãªçŸ¥è˜ã‚„何年もã®çµŒé¨“ã«å–ã£ã¦ä»£ã‚ã‚‹ã‚‚ã® -ã§ã¯ã‚ã‚Šã¾ã›ã‚“ãŒã€å°‘ãªãã¨ã‚‚リファレンスã¨ã—ã¦ã¯ã„ã„本ã§ã™ã€‚ +ã§ã¯ã‚ã‚Šã¾ã›ã‚“ãŒã€å°‘ãªãã¨ã‚‚リファレンスã¨ã—ã¦ã¯è‰¯ã„本ã§ã™ã€‚ - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall] -『プãƒã‚°ãƒ©ãƒŸãƒ³ã‚°è¨€èªžï¼£ç¬¬2版ã€(B.W. カーニãƒãƒ³/D.M. リッãƒãƒ¼è‘— 石田晴久訳) [共立出版] - "Practical C Programming" by Steve Oualline [O'Reilly] @@ -76,7 +77,7 @@ Linux カーãƒãƒ«é–‹ç™ºã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¨å…±ã«æ´»å‹•ã™ã‚‹ã‚„り方をå¦ã ã¨ãã©ãã€ã‚«ãƒ¼ãƒãƒ«ãŒãƒ„ールãƒã‚§ã‚¤ãƒ³ã‚„ C 言語拡張ã«ç½®ã„ã¦ã„ã‚‹å‰æãŒã©ã† ãªã£ã¦ã„ã‚‹ã®ã‹ã‚ã‹ã‚Šã«ãã„ã“ã¨ãŒã‚ã‚Šã€ã¾ãŸã€æ®‹å¿µãªã“ã¨ã«æ±ºå®šçš„ãªãƒªãƒ•ã‚¡ レンスã¯å˜åœ¨ã—ã¾ã›ã‚“ã€‚æƒ…å ±ã‚’å¾—ã‚‹ã«ã¯ã€gcc ã® info ページ( info gcc )ã‚’ -ã¿ã¦ãã ã•ã„。 +見ã¦ãã ã•ã„。 ã‚ãªãŸã¯æ—¢å˜ã®é–‹ç™ºã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¨ä¸€ç·’ã«ä½œæ¥ã™ã‚‹æ–¹æ³•ã‚’å¦ã¼ã†ã¨ã—ã¦ã„ã‚‹ã“ ã¨ã«ç•™æ„ã—ã¦ãã ã•ã„。ãã®ã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¯ã€ã‚³ãƒ¼ãƒ‡ã‚£ãƒ³ã‚°ã€ã‚¹ã‚¿ã‚¤ãƒ«ã€ @@ -92,7 +93,7 @@ Linux カーãƒãƒ«é–‹ç™ºã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¨å…±ã«æ´»å‹•ã™ã‚‹ã‚„り方をå¦ã Linux カーãƒãƒ«ã®ã‚½ãƒ¼ã‚¹ã‚³ãƒ¼ãƒ‰ã¯ GPL ライセンスã®ä¸‹ã§ãƒªãƒªãƒ¼ã‚¹ã•ã‚Œã¦ã„ã¾ ã™ã€‚ライセンスã®è©³ç´°ã«ã¤ã„ã¦ã¯ã€ã‚½ãƒ¼ã‚¹ãƒ„リーã®ãƒ¡ã‚¤ãƒ³ãƒ‡ã‚£ãƒ¬ã‚¯ãƒˆãƒªã«å˜åœ¨ -ã™ã‚‹ã€COPYING ã®ãƒ•ã‚¡ã‚¤ãƒ«ã‚’ã¿ã¦ãã ã•ã„。もã—ライセンスã«ã¤ã„ã¦ã•ã‚‰ã«è³ª +ã™ã‚‹ã€COPYING ã®ãƒ•ã‚¡ã‚¤ãƒ«ã‚’見ã¦ãã ã•ã„。もã—ライセンスã«ã¤ã„ã¦ã•ã‚‰ã«è³ª å•ãŒã‚ã‚Œã°ã€Linux Kernel メーリングリストã«è³ªå•ã™ã‚‹ã®ã§ã¯ãªãã€ã©ã†ãž 法律家ã«ç›¸è«‡ã—ã¦ãã ã•ã„。メーリングリストã®äººé”ã¯æ³•å¾‹å®¶ã§ã¯ãªãã€æ³•çš„ å•é¡Œã«ã¤ã„ã¦ã¯å½¼ã‚‰ã®å£°æ˜Žã¯ã‚ã¦ã«ã™ã‚‹ã¹ãã§ã¯ã‚ã‚Šã¾ã›ã‚“。 @@ -109,7 +110,8 @@ Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã¯å¹…広ã„範囲ã®ãƒ‰ã‚ュメントをå æ–°ã—ã„ドã‚ãƒ¥ãƒ¡ãƒ³ãƒˆãƒ•ã‚¡ã‚¤ãƒ«ã‚‚è¿½åŠ ã™ã‚‹ã“ã¨ã‚’勧ã‚ã¾ã™ã€‚ カーãƒãƒ«ã®å¤‰æ›´ãŒã€ã‚«ãƒ¼ãƒãƒ«ãŒãƒ¦ãƒ¼ã‚¶ç©ºé–“ã«å…¬é–‹ã—ã¦ã„るインターフェイス㮠変更を引ãèµ·ã“ã™å ´åˆã€ãã®å¤‰æ›´ã‚’説明ã™ã‚‹ãƒžãƒ‹ãƒ¥ã‚¢ãƒ«ãƒšãƒ¼ã‚¸ã®ãƒ‘ッãƒã‚„æƒ…å ± -をマニュアルページã®ãƒ¡ãƒ³ãƒ†ãƒŠ mtk-manpages@gmx.net ã«é€ã‚‹ã“ã¨ã‚’勧ã‚ã¾ã™ã€‚ +をマニュアルページã®ãƒ¡ãƒ³ãƒ†ãƒŠ mtk-manpages@gmx.net ã«é€ã‚‹ã“ã¨ã‚’勧ã‚ã¾ +ã™ã€‚ 以下ã¯ã‚«ãƒ¼ãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã«å«ã¾ã‚Œã¦ã„ã‚‹èªã‚“ã§ãŠãã¹ãファイルã®ä¸€è¦§ã§ ã™- @@ -117,7 +119,7 @@ Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã¯å¹…広ã„範囲ã®ãƒ‰ã‚ュメントをå README ã“ã®ãƒ•ã‚¡ã‚¤ãƒ«ã¯ Linuxカーãƒãƒ«ã®ç°¡å˜ãªèƒŒæ™¯ã¨ã‚«ãƒ¼ãƒãƒ«ã‚’è¨å®š(訳注 configure )ã—ã€ç”Ÿæˆ(訳注 build )ã™ã‚‹ãŸã‚ã«å¿…è¦ãªã“ã¨ã¯ä½•ã‹ãŒæ›¸ã‹ã‚Œ - ã¦ã„ã¾ã™ã€‚カーãƒãƒ«ã«é–¢ã—ã¦åˆã‚ã¦ã®äººã¯ã“ã“ã‹ã‚‰ã‚¹ã‚¿ãƒ¼ãƒˆã™ã‚‹ã¨ã‚ˆã„㧠+ ã¦ã„ã¾ã™ã€‚カーãƒãƒ«ã«é–¢ã—ã¦åˆã‚ã¦ã®äººã¯ã“ã“ã‹ã‚‰ã‚¹ã‚¿ãƒ¼ãƒˆã™ã‚‹ã¨è‰¯ã„㧠ã—ょã†ã€‚ Documentation/Changes @@ -128,7 +130,7 @@ Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã¯å¹…広ã„範囲ã®ãƒ‰ã‚ュメントをå Documentation/CodingStyle ã“れ㯠Linux カーãƒãƒ«ã®ã‚³ãƒ¼ãƒ‡ã‚£ãƒ³ã‚°ã‚¹ã‚¿ã‚¤ãƒ«ã¨èƒŒæ™¯ã«ã‚ã‚‹ç†ç”±ã‚’記述 ã—ã¦ã„ã¾ã™ã€‚å…¨ã¦ã®æ–°ã—ã„コードã¯ã“ã®ãƒ‰ã‚ュメントã«ã‚るガイドライン - ã«å¾“ã£ã¦ã„ã‚‹ã“ã¨ã‚’期待ã•ã‚Œã¦ã„ã¾ã™ã€‚大部分ã®ãƒ¡ãƒ³ãƒ†ãƒŠãƒ¼ã¯ã“れらã®ãƒ«ãƒ¼ + ã«å¾“ã£ã¦ã„ã‚‹ã“ã¨ã‚’期待ã•ã‚Œã¦ã„ã¾ã™ã€‚大部分ã®ãƒ¡ãƒ³ãƒ†ãƒŠã¯ã“れらã®ãƒ«ãƒ¼ ルã«å¾“ã£ã¦ã„ã‚‹ã‚‚ã®ã ã‘ã‚’å—ã‘付ã‘ã€å¤šãã®äººã¯æ£ã—ã„スタイルã®ã‚³ãƒ¼ãƒ‰ ã ã‘をレビューã—ã¾ã™ã€‚ @@ -168,16 +170,16 @@ Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã¯å¹…広ã„範囲ã®ãƒ‰ã‚ュメントをå 支æ´ã—ã¦ãã ã•ã„。 Documentation/ManagementStyle - ã“ã®ãƒ‰ã‚ュメント㯠Linux カーãƒãƒ«ã®ãƒ¡ãƒ³ãƒ†ãƒŠãƒ¼é”ãŒã©ã†è¡Œå‹•ã™ã‚‹ã‹ã€ + ã“ã®ãƒ‰ã‚ュメント㯠Linux カーãƒãƒ«ã®ãƒ¡ãƒ³ãƒ†ãƒŠé”ãŒã©ã†è¡Œå‹•ã™ã‚‹ã‹ã€ 彼らã®æ‰‹æ³•ã®èƒŒæ™¯ã«ã‚る共有ã•ã‚Œã¦ã„る精神ã«ã¤ã„ã¦è¨˜è¿°ã—ã¦ã„ã¾ã™ã€‚ã“ ã‚Œã¯ã‚«ãƒ¼ãƒãƒ«é–‹ç™ºã®åˆå¿ƒè€…ãªã‚‰ï¼ˆã‚‚ã—ãã¯ã€å˜ã«èˆˆå‘³ãŒã‚ã‚‹ã ã‘ã®äººã§ã‚‚） - é‡è¦ã§ã™ã€‚ãªãœãªã‚‰ã“ã®ãƒ‰ã‚ュメントã¯ã€ã‚«ãƒ¼ãƒãƒ«ãƒ¡ãƒ³ãƒ†ãƒŠãƒ¼é”ã®ç‹¬ç‰¹ãª + é‡è¦ã§ã™ã€‚ãªãœãªã‚‰ã“ã®ãƒ‰ã‚ュメントã¯ã€ã‚«ãƒ¼ãƒãƒ«ãƒ¡ãƒ³ãƒ†ãƒŠé”ã®ç‹¬ç‰¹ãª 行動ã«ã¤ã„ã¦ã®å¤šãã®èª¤è§£ã‚„混乱を解消ã™ã‚‹ã‹ã‚‰ã§ã™ã€‚ Documentation/stable_kernel_rules.txt ã“ã®ãƒ•ã‚¡ã‚¤ãƒ«ã¯ã©ã®ã‚ˆã†ã« stable カーãƒãƒ«ã®ãƒªãƒªãƒ¼ã‚¹ãŒè¡Œã‚れるã‹ã®ãƒ«ãƒ¼ ルãŒè¨˜è¿°ã•ã‚Œã¦ã„ã¾ã™ã€‚ãã—ã¦ã“れらã®ãƒªãƒªãƒ¼ã‚¹ã®ä¸ã®ã©ã“ã‹ã§å¤‰æ›´ã‚’å– - り入れã¦ã‚‚らã„ãŸã„å ´åˆã«ä½•ã‚’ã™ã‚Œã°ã„ã„ã‹ãŒç¤ºã•ã‚Œã¦ã„ã¾ã™ã€‚ + り入れã¦ã‚‚らã„ãŸã„å ´åˆã«ä½•ã‚’ã™ã‚Œã°è‰¯ã„ã‹ãŒç¤ºã•ã‚Œã¦ã„ã¾ã™ã€‚ Documentation/kernel-docs.txt 　　カーãƒãƒ«é–‹ç™ºã«ä»˜éšã™ã‚‹å¤–部ドã‚ュメントã®ãƒªã‚¹ãƒˆã§ã™ã€‚ã‚‚ã—ã‚ãªãŸãŒ @@ -218,9 +220,9 @@ web サイトã«ã¯ã€ã‚³ãƒ¼ãƒ‰ã®æ§‹æˆã€ã‚µãƒ–システムã€ç¾åœ¨å˜åœ¨ã™ã ã“ã“ã«ã¯ã€ã¾ãŸã€ã‚«ãƒ¼ãƒãƒ«ã®ã‚³ãƒ³ãƒ‘イルã®ã‚„り方やパッãƒã®å½“ã¦æ–¹ãªã©ã®é–“接 çš„ãªåŸºæœ¬æƒ…å ±ã‚‚è¨˜è¿°ã•ã‚Œã¦ã„ã¾ã™ã€‚ -ã‚ãªãŸãŒã©ã“ã‹ã‚‰ã‚¹ã‚¿ãƒ¼ãƒˆã—ã¦ã‚ˆã„ã‹ã‚ã‹ã‚‰ãªã„ãŒã€Linux カーãƒãƒ«é–‹ç™ºã‚³ãƒŸãƒ¥ +ã‚ãªãŸãŒã©ã“ã‹ã‚‰ã‚¹ã‚¿ãƒ¼ãƒˆã—ã¦è‰¯ã„ã‹ã‚ã‹ã‚‰ãªã„ãŒã€Linux カーãƒãƒ«é–‹ç™ºã‚³ãƒŸãƒ¥ ニティã«å‚åŠ ã—ã¦ä½•ã‹ã™ã‚‹ã“ã¨ã‚’ã•ãŒã—ã¦ã„ã‚‹å ´åˆã«ã¯ã€Linux kernel -Janitor's プãƒã‚¸ã‚§ã‚¯ãƒˆã«ã„ã‘ã°ã‚ˆã„ã§ã—ょㆠ- +Janitor's プãƒã‚¸ã‚§ã‚¯ãƒˆã«ã„ã‘ã°è‰¯ã„ã§ã—ょㆠ- http://janitor.kernelnewbies.org/ ã“ã“ã¯ãã®ã‚ˆã†ãªã‚¹ã‚¿ãƒ¼ãƒˆã‚’ã™ã‚‹ã®ã«ã†ã£ã¦ã¤ã‘ã®å ´æ‰€ã§ã™ã€‚ã“ã“ã«ã¯ã€ Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã®ä¸ã«å«ã¾ã‚Œã‚‹ã€ãã‚Œã„ã«ã—ã€ä¿®æ£ã—ãªã‘ã‚Œã°ãª @@ -243,7 +245,7 @@ Linux カーãƒãƒ«ã‚½ãƒ¼ã‚¹ãƒ„リーã®ä¸ã«å«ã¾ã‚Œã‚‹ã€ãã‚Œã„ã«ã—ã€ä¿ 自己å‚照方å¼ã§ã€ç´¢å¼•ãŒã¤ã„㟠web å½¢å¼ã§ã€ã‚½ãƒ¼ã‚¹ã‚³ãƒ¼ãƒ‰ã‚’å‚ç…§ã™ã‚‹ã“ã¨ãŒ ã§ãã¾ã™ã€‚ã“ã®æœ€æ–°ã®ç´ æ™´ã—ã„カーãƒãƒ«ã‚³ãƒ¼ãƒ‰ã®ãƒªãƒã‚¸ãƒˆãƒªã¯ä»¥ä¸‹ã§è¦‹ã¤ã‹ã‚Š ã¾ã™- - http://sosdg.org/~coywolf/lxr/ + http://sosdg.org/~qiyong/lxr/ 開発プãƒã‚»ã‚¹ ----------------------- @@ -265,9 +267,9 @@ Linux カーãƒãƒ«ã®é–‹ç™ºãƒ—ãƒã‚»ã‚¹ã¯ç¾åœ¨å¹¾ã¤ã‹ã®ç•°ãªã‚‹ãƒ¡ã‚¤ãƒ³ã‚ 以下ã®ã¨ãŠã‚Š- - æ–°ã—ã„カーãƒãƒ«ãŒãƒªãƒªãƒ¼ã‚¹ã•ã‚ŒãŸç›´å¾Œã«ã€2週間ã®ç‰¹åˆ¥æœŸé–“ãŒè¨ã‘られ〠- ã“ã®æœŸé–“ä¸ã«ã€ãƒ¡ãƒ³ãƒ†ãƒŠãƒ¼é”㯠Linus ã«å¤§ããªå·®åˆ†ã‚’é€ã‚‹ã“ã¨ãŒã§ãã¾ - ã™ã€‚ã“ã®ã‚ˆã†ãªå·®åˆ†ã¯é€šå¸¸ -mm カーãƒãƒ«ã«æ•°é€±é–“å«ã¾ã‚Œã¦ããŸãƒ‘ッãƒã§ - ã™ã€‚ 大ããªå¤‰æ›´ã¯ git(カーãƒãƒ«ã®ã‚½ãƒ¼ã‚¹ç®¡ç†ãƒ„ールã€è©³ç´°ã¯ + ã“ã®æœŸé–“ä¸ã«ã€ãƒ¡ãƒ³ãƒ†ãƒŠé”㯠Linus ã«å¤§ããªå·®åˆ†ã‚’é€ã‚‹ã“ã¨ãŒã§ãã¾ã™ã€‚ + ã“ã®ã‚ˆã†ãªå·®åˆ†ã¯é€šå¸¸ -mm カーãƒãƒ«ã«æ•°é€±é–“å«ã¾ã‚Œã¦ããŸãƒ‘ッãƒã§ã™ã€‚ + 大ããªå¤‰æ›´ã¯ git(カーãƒãƒ«ã®ã‚½ãƒ¼ã‚¹ç®¡ç†ãƒ„ールã€è©³ç´°ã¯ http://git.or.cz/ å‚ç…§) を使ã£ã¦é€ã‚‹ã®ãŒå¥½ã¾ã—ã„ã‚„ã‚Šæ–¹ã§ã™ãŒã€ãƒ‘ッ ãƒãƒ•ã‚¡ã‚¤ãƒ«ã®å½¢å¼ã®ã¾ã¾é€ã‚‹ã®ã§ã‚‚å分ã§ã™ã€‚ @@ -285,6 +287,10 @@ Linux カーãƒãƒ«ã®é–‹ç™ºãƒ—ãƒã‚»ã‚¹ã¯ç¾åœ¨å¹¾ã¤ã‹ã®ç•°ãªã‚‹ãƒ¡ã‚¤ãƒ³ã‚ ã«å®‰å®šã—ãŸçŠ¶æ…‹ã«ã‚ã‚‹ã¨åˆ¤æ–ã—ãŸã¨ãã«ãƒªãƒªãƒ¼ã‚¹ã•ã‚Œã¾ã™ã€‚目標ã¯æ¯Žé€±æ–° ã—ã„ -rc カーãƒãƒ«ã‚’リリースã™ã‚‹ã“ã¨ã§ã™ã€‚ + - 以下㮠URL ã§å„ -rc リリースã«å˜åœ¨ã™ã‚‹æ—¢çŸ¥ã®å¾Œæˆ»ã‚Šå•é¡Œã®ãƒªã‚¹ãƒˆ + ãŒè¿½è·¡ã•ã‚Œã¾ã™- + http://kernelnewbies.org/known_regressions + - ã“ã®ãƒ—ãƒã‚»ã‚¹ã¯ã‚«ãƒ¼ãƒãƒ«ãŒ 「準備ãŒã§ããŸã€ã¨è€ƒãˆã‚‰ã‚Œã‚‹ã¾ã§ç¶™ç¶šã—ã¾ ã™ã€‚ã“ã®ãƒ—ãƒã‚»ã‚¹ã¯ã ã„ãŸã„ 6週間継続ã—ã¾ã™ã€‚ @@ -331,8 +337,8 @@ Andrew ã¯å€‹åˆ¥ã®ã‚µãƒ–システムカーãƒãƒ«ãƒ„リーã¨ãƒ‘ッãƒã‚’å…¨ã¦é linux-kernel メーリングリストã§åŽé›†ã•ã‚ŒãŸå¤šæ•°ã®ãƒ‘ッãƒã¨åŒæ™‚ã«ä¸€ã¤ã«ã¾ ã¨ã‚ã¾ã™ã€‚ ã“ã®ãƒ„リーã¯æ–°æ©Ÿèƒ½ã¨ãƒ‘ッãƒãŒæ¤œè¨¼ã•ã‚Œã‚‹å ´ã¨ãªã‚Šã¾ã™ã€‚ã‚る期間ã®é–“パッム-㌠-mm ã«å…¥ã£ã¦ä¾¡å€¤ã‚’証明ã•ã‚ŒãŸã‚‰ã€Andrew やサブシステムメンテナãŒã€ãƒ¡ -インラインã¸å…¥ã‚Œã‚‹ã‚ˆã†ã« Linus ã«ãƒ—ッシュã—ã¾ã™ã€‚ +㌠-mm ã«å…¥ã£ã¦ä¾¡å€¤ã‚’証明ã•ã‚ŒãŸã‚‰ã€Andrew やサブシステムメンテナãŒã€ +メインラインã¸å…¥ã‚Œã‚‹ã‚ˆã†ã« Linus ã«ãƒ—ッシュã—ã¾ã™ã€‚ メインカーãƒãƒ«ãƒ„リーã«å«ã‚ã‚‹ãŸã‚ã« Linus ã«é€ã‚‹å‰ã«ã€ã™ã¹ã¦ã®æ–°ã—ã„パッ ãƒãŒ -mm ツリーã§ãƒ†ã‚¹ãƒˆã•ã‚Œã‚‹ã“ã¨ãŒå¼·ã推奨ã•ã‚Œã¾ã™ã€‚ @@ -460,7 +466,7 @@ MAINTAINERS ファイルã«ãƒªã‚¹ãƒˆãŒã‚ã‚Šã¾ã™ã®ã§å‚ç…§ã—ã¦ãã ã•ã ã›ã‚“- 彼らã¯ã‚ãªãŸã®ãƒ‘ッãƒã®è¡Œæ¯Žã«ã‚³ãƒ¡ãƒ³ãƒˆã‚’入れãŸã„ã®ã§ã€ãã®ãŸã‚ã«ã¯ãã†ã™ ã‚‹ã—ã‹ã‚ã‚Šã¾ã›ã‚“。ã‚ãªãŸã®ãƒ¡ãƒ¼ãƒ«ãƒ—ãƒã‚°ãƒ©ãƒ ãŒç©ºç™½ã‚„タブを圧縮ã—ãªã„よㆠ-ã«ç¢ºèªã—ãŸæ–¹ãŒã„ã„ã§ã™ã€‚最åˆã®è‰¯ã„テストã¨ã—ã¦ã¯ã€è‡ªåˆ†ã«ãƒ¡ãƒ¼ãƒ«ã‚’é€ã£ã¦ +ã«ç¢ºèªã—ãŸæ–¹ãŒè‰¯ã„ã§ã™ã€‚最åˆã®è‰¯ã„テストã¨ã—ã¦ã¯ã€è‡ªåˆ†ã«ãƒ¡ãƒ¼ãƒ«ã‚’é€ã£ã¦ ã¿ã¦ã€ãã®ãƒ‘ッãƒã‚’自分ã§å½“ã¦ã¦ã¿ã‚‹ã“ã¨ã§ã™ã€‚ã‚‚ã—ãã‚ŒãŒã†ã¾ãè¡Œã‹ãªã„㪠らã€ã‚ãªãŸã®ãƒ¡ãƒ¼ãƒ«ãƒ—ãƒã‚°ãƒ©ãƒ ã‚’ç›´ã—ã¦ã‚‚らã†ã‹ã€æ£ã—ãå‹•ãよã†ã«å¤‰ãˆã‚‹ã¹ ãã§ã™ã€‚ @@ -507,14 +513,14 @@ MAINTAINERS ファイルã«ãƒªã‚¹ãƒˆãŒã‚ã‚Šã¾ã™ã®ã§å‚ç…§ã—ã¦ãã ã•ã ã¨ã‚‚普通ã®ã“ã¨ã§ã™ã€‚ã“ã‚Œã¯ã‚ãªãŸã®ãƒ‘ッãƒãŒå—ã‘入れられãªã„ã¨ã„ã†ã“ã¨ã§ 㯠*ã‚ã‚Šã¾ã›ã‚“*ã€ãã—ã¦ã‚ãªãŸè‡ªèº«ã«å対ã™ã‚‹ã“ã¨ã‚’æ„味ã™ã‚‹ã®ã§ã‚‚ *ã‚ã‚Šã¾ ã›ã‚“*。å˜ã«è‡ªåˆ†ã®ãƒ‘ッãƒã«å¯¾ã—ã¦æŒ‡æ‘˜ã•ã‚ŒãŸå•é¡Œã‚’å…¨ã¦ä¿®æ£ã—ã¦å†é€ã™ã‚Œã° -ã„ã„ã®ã§ã™ã€‚ +良ã„ã®ã§ã™ã€‚ カーãƒãƒ«ã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¨ä¼æ¥çµ„ç¹”ã®ã¡ãŒã„ ----------------------------------------------------------------- カーãƒãƒ«ã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¯å¤§éƒ¨åˆ†ã®ä¼çµ±çš„ãªä¼šç¤¾ã®é–‹ç™ºç’°å¢ƒã¨ã¯ç•°ã£ãŸã‚„り方㧠-å‹•ã„ã¦ã„ã¾ã™ã€‚以下ã¯å•é¡Œã‚’é¿ã‘ã‚‹ãŸã‚ã«ã§ãã‚‹ã¨ã‚ˆã„ã“ã¨ã®ã®ãƒªã‚¹ãƒˆã§ã™- +å‹•ã„ã¦ã„ã¾ã™ã€‚以下ã¯å•é¡Œã‚’é¿ã‘ã‚‹ãŸã‚ã«ã§ãã‚‹ã¨è‰¯ã„ã“ã¨ã®ãƒªã‚¹ãƒˆã§ã™- ã‚ãªãŸã®æ案ã™ã‚‹å¤‰æ›´ã«ã¤ã„ã¦è¨€ã†ã¨ãã®ã†ã¾ã„言ã„方： @@ -525,7 +531,7 @@ MAINTAINERS ファイルã«ãƒªã‚¹ãƒˆãŒã‚ã‚Šã¾ã™ã®ã§å‚ç…§ã—ã¦ãã ã•ã - "以下ã¯ä¸€é€£ã®å°ã•ãªãƒ‘ッãƒç¾¤ã§ã™ãŒ..." - "ã“ã‚Œã¯å…¸åž‹çš„ãªãƒžã‚·ãƒ³ã§ã®æ€§èƒ½ã‚’å‘上ã•ã›ã¾ã™.." - ã‚„ã‚ãŸæ–¹ãŒã„ã„悪ã„言ã„方： + ã‚„ã‚ãŸæ–¹ãŒè‰¯ã„悪ã„言ã„方： - ã“ã®ã‚„り方㧠AIX/ptx/Solaris ã§ã¯ã§ããŸã®ã§ã€ã§ãã‚‹ã¯ãšã - ç§ã¯ã“れを20å¹´ã‚‚ã®é–“ã‚„ã£ã¦ããŸã€ã ã‹ã‚‰ @@ -575,10 +581,10 @@ Linux カーãƒãƒ«ã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¯ã€ä¸€åº¦ã«å¤§é‡ã®ã‚³ãƒ¼ãƒ‰ã®å¡Šã‚’å– 1) å°ã•ã„パッãƒã¯ã‚ãªãŸã®ãƒ‘ッãƒãŒé©ç”¨ã•ã‚Œã‚‹è¦‹è¾¼ã¿ã‚’大ããã—ã¾ã™ã€ã‚«ãƒ¼ ãƒãƒ«ã®äººé”ã¯ãƒ‘ッãƒãŒæ£ã—ã„ã‹ã©ã†ã‹ã‚’確èªã™ã‚‹æ™‚間や労力をã‹ã‘ãªã„ã‹ - らã§ã™ã€‚5è¡Œã®ãƒ‘ッãƒã¯ãƒ¡ãƒ³ãƒ†ãƒŠãŒãŸã£ãŸ1秒見るã ã‘ã§é©ç”¨ã§ãã¾ã™ã€‚ã— - ã‹ã—ã€500è¡Œã®ãƒ‘ッãƒã¯ã€æ£ã—ã„ã“ã¨ã‚’レビューã™ã‚‹ã®ã«æ•°æ™‚é–“ã‹ã‹ã‚‹ã‹ã‚‚ - ã—ã‚Œã¾ã›ã‚“(時間ã¯ãƒ‘ッãƒã®ã‚µã‚¤ã‚ºãªã©ã«ã‚ˆã‚ŠæŒ‡æ•°é–¢æ•°ã«æ¯”例ã—ã¦ã‹ã‹ã‚Šã¾ - ã™) + らã§ã™ã€‚5è¡Œã®ãƒ‘ッãƒã¯ãƒ¡ãƒ³ãƒ†ãƒŠãŒãŸã£ãŸ1秒見るã ã‘ã§é©ç”¨ã§ãã¾ã™ã€‚ + ã—ã‹ã—ã€500è¡Œã®ãƒ‘ッãƒã¯ã€æ£ã—ã„ã“ã¨ã‚’レビューã™ã‚‹ã®ã«æ•°æ™‚é–“ã‹ã‹ã‚‹ã‹ + ã‚‚ã—ã‚Œã¾ã›ã‚“(時間ã¯ãƒ‘ッãƒã®ã‚µã‚¤ã‚ºãªã©ã«ã‚ˆã‚ŠæŒ‡æ•°é–¢æ•°ã«æ¯”例ã—ã¦ã‹ã‹ã‚Š + ã¾ã™) å°ã•ã„パッãƒã¯ä½•ã‹ã‚ã£ãŸã¨ãã«ãƒ‡ãƒãƒƒã‚°ã‚‚ã¨ã¦ã‚‚ç°¡å˜ã«ãªã‚Šã¾ã™ã€‚パッ ãƒã‚’1個1個å–り除ãã®ã¯ã€ã¨ã¦ã‚‚大ããªãƒ‘ッãƒã‚’当ã¦ãŸå¾Œã«(ã‹ã¤ã€ä½•ã‹ãŠ @@ -587,23 +593,23 @@ Linux カーãƒãƒ«ã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¯ã€ä¸€åº¦ã«å¤§é‡ã®ã‚³ãƒ¼ãƒ‰ã®å¡Šã‚’å– 2) å°ã•ã„パッãƒã‚’é€ã‚‹ã ã‘ã§ãªãã€é€ã‚‹ã¾ãˆã«ã€æ›¸ãç›´ã—ã¦ã€ã‚·ãƒ³ãƒ—ルã«ã™ ã‚‹(ã‚‚ã—ãã¯ã€å˜ã«é †ç•ªã‚’変ãˆã‚‹ã ã‘ã§ã‚‚)ã“ã¨ã‚‚ã€ã¨ã¦ã‚‚é‡è¦ã§ã™ã€‚ -以下ã¯ã‚«ãƒ¼ãƒãƒ«é–‹ç™ºè€…ã® Al Viro ã®ãŸã¨ãˆè©±ã—ã§ã™ï¼š +以下ã¯ã‚«ãƒ¼ãƒãƒ«é–‹ç™ºè€…ã® Al Viro ã®ãŸã¨ãˆè©±ã§ã™ï¼š "生徒ã®æ•°å¦ã®å®¿é¡Œã‚’採点ã™ã‚‹å…ˆç”Ÿã®ã“ã¨ã‚’考ãˆã¦ã¿ã¦ãã ã•ã„ã€å…ˆ - 生ã¯ç”Ÿå¾’ãŒè§£ã«åˆ°é”ã™ã‚‹ã¾ã§ã®è©¦è¡ŒéŒ¯èª¤ã‚’ã¿ãŸã„ã¨ã¯æ€ã‚ãªã„ã§ã—ょ - ã†ã€‚先生ã¯ç°¡æ½”ãªæœ€é«˜ã®è§£ã‚’ã¿ãŸã„ã®ã§ã™ã€‚良ã„生徒ã¯ã“れを知ã£ã¦ + 生ã¯ç”Ÿå¾’ãŒè§£ã«åˆ°é”ã™ã‚‹ã¾ã§ã®è©¦è¡ŒéŒ¯èª¤ã‚’見ãŸã„ã¨ã¯æ€ã‚ãªã„ã§ã—ょ + ã†ã€‚先生ã¯ç°¡æ½”ãªæœ€é«˜ã®è§£ã‚’見ãŸã„ã®ã§ã™ã€‚良ã„生徒ã¯ã“れを知ã£ã¦ ãŠã‚Šã€ãã—ã¦æœ€çµ‚解ã®å‰ã®ä¸é–“作æ¥ã‚’æ出ã™ã‚‹ã“ã¨ã¯æ±ºã—ã¦ãªã„ã®ã§ ã™" - カーãƒãƒ«é–‹ç™ºã§ã‚‚ã“ã‚Œã¯åŒã˜ã§ã™ã€‚メンテナーé”ã¨ãƒ¬ãƒ“ューアé”ã¯ã€ - å•é¡Œã‚’解決ã™ã‚‹è§£ã®èƒŒå¾Œã«ãªã‚‹æ€è€ƒãƒ—ãƒã‚»ã‚¹ã‚’ã¿ãŸã„ã¨ã¯æ€ã„ã¾ã›ã‚“。 - 彼らã¯å˜ç´”ã§ã‚ã–ã‚„ã‹ãªè§£æ±ºæ–¹æ³•ã‚’ã¿ãŸã„ã®ã§ã™ã€‚ + カーãƒãƒ«é–‹ç™ºã§ã‚‚ã“ã‚Œã¯åŒã˜ã§ã™ã€‚メンテナé”ã¨ãƒ¬ãƒ“ューアé”ã¯ã€ + å•é¡Œã‚’解決ã™ã‚‹è§£ã®èƒŒå¾Œã«ãªã‚‹æ€è€ƒãƒ—ãƒã‚»ã‚¹ã‚’見ãŸã„ã¨ã¯æ€ã„ã¾ã›ã‚“。 + 彼らã¯å˜ç´”ã§ã‚ã–ã‚„ã‹ãªè§£æ±ºæ–¹æ³•ã‚’見ãŸã„ã®ã§ã™ã€‚ ã‚ã–ã‚„ã‹ãªè§£ã‚’説明ã™ã‚‹ã®ã¨ã€ã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¨å…±ã«ä»•äº‹ã‚’ã—ã€æœªè§£æ±ºã®ä»•äº‹ã‚’ è°è«–ã™ã‚‹ã“ã¨ã®ãƒãƒ©ãƒ³ã‚¹ã‚’ã‚ープã™ã‚‹ã®ã¯é›£ã—ã„ã‹ã‚‚ã—ã‚Œã¾ã›ã‚“。 ã§ã™ã‹ã‚‰ã€é–‹ç™ºãƒ—ãƒã‚»ã‚¹ã®æ—©æœŸæ®µéšŽã§æ”¹å–„ã®ãŸã‚ã®ãƒ•ã‚£ãƒ¼ãƒ‰ãƒãƒƒã‚¯ã‚’もらã†ã‚ˆ -ã†ã«ã™ã‚‹ã®ã‚‚ã„ã„ã§ã™ãŒã€å¤‰æ›´ç‚¹ã‚’å°ã•ã„部分ã«åˆ†å‰²ã—ã¦å…¨ä½“ã§ã¯ã¾ã 完æˆã— -ã¦ã„ãªã„仕事を(部分的ã«)å–り込んã§ã‚‚らãˆã‚‹ã‚ˆã†ã«ã™ã‚‹ã“ã¨ã‚‚ã„ã„ã“ã¨ã§ã™ã€‚ +ã†ã«ã™ã‚‹ã®ã‚‚良ã„ã§ã™ãŒã€å¤‰æ›´ç‚¹ã‚’å°ã•ã„部分ã«åˆ†å‰²ã—ã¦å…¨ä½“ã§ã¯ã¾ã 完æˆã— +ã¦ã„ãªã„仕事を(部分的ã«)å–り込んã§ã‚‚らãˆã‚‹ã‚ˆã†ã«ã™ã‚‹ã“ã¨ã‚‚良ã„ã“ã¨ã§ã™ã€‚ ã¾ãŸã€ã§ã上ãŒã£ã¦ã„ãªã„ã‚‚ã®ã‚„ã€"å°†æ¥ç›´ã™" よã†ãªãƒ‘ッãƒã‚’ã€æœ¬æµã«å«ã‚ ã¦ã‚‚らã†ã‚ˆã†ã«é€ã£ã¦ã‚‚ã€ãã‚Œã¯å—ã‘付ã‘られãªã„ã“ã¨ã‚’ç†è§£ã—ã¦ãã ã•ã„。 @@ -629,7 +635,7 @@ Linux カーãƒãƒ«ã‚³ãƒŸãƒ¥ãƒ‹ãƒ†ã‚£ã¯ã€ä¸€åº¦ã«å¤§é‡ã®ã‚³ãƒ¼ãƒ‰ã®å¡Šã‚’å– - テストçµæžœ ã“ã‚Œã«ã¤ã„ã¦å…¨ã¦ãŒã©ã®ã‚ˆã†ã«ã‚ã‚‹ã¹ãã‹ã«ã¤ã„ã¦ã®è©³ç´°ã¯ã€ä»¥ä¸‹ã®ãƒ‰ã‚ュメ -ント㮠ChangeLog セクションをã¿ã¦ãã ã•ã„- +ント㮠ChangeLog セクションを見ã¦ãã ã•ã„- "The Perfect Patch" http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a57c1f216b21..eb247997f679 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -68,6 +68,7 @@ parameter is applicable: PARIDE The ParIDE (parallel port IDE) subsystem is enabled. PARISC The PA-RISC architecture is enabled. PCI PCI bus support is enabled. + PCIE PCI Express support is enabled. PCMCIA The PCMCIA subsystem is enabled. PNP Plug & Play support is enabled. PPC PowerPC architecture is enabled. @@ -348,6 +349,11 @@ and is between 256 and 4096 characters. It is defined in the file blkmtd_bs= blkmtd_count= + boot_delay= Milliseconds to delay each printk during boot. + Values larger than 10 seconds (10000) are changed to + no delay (0). + Format: integer + bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) bttv.radio= Most important insmod options are available as kernel args too. @@ -864,6 +870,10 @@ and is between 256 and 4096 characters. It is defined in the file lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip Format: addr:<io>,irq:<irq> + libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume + when set. + Format: <int> + load_ramdisk= [RAM] List of ramdisks to load from floppy See Documentation/ramdisk.txt. @@ -901,6 +911,11 @@ and is between 256 and 4096 characters. It is defined in the file n must be a power of two. The default size is set in the kernel config file. + logo.nologo [FB] Disables display of the built-in Linux logo. + This may be used to provide more screen space for + kernel log messages and is useful when debugging + kernel boot problems. + lp=0 [LP] Specify parallel ports to use, e.g, lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses lp=reset first parallel port). 'lp=0' disables the @@ -1009,6 +1024,10 @@ and is between 256 and 4096 characters. It is defined in the file meye.*= [HW] Set MotionEye Camera parameters See Documentation/video4linux/meye.txt. + mfgpt_irq= [IA-32] Specify the IRQ to use for the + Multi-Function General Purpose Timers on AMD Geode + platforms. + mga= [HW,DRM] mousedev.tap_time= @@ -1074,16 +1093,19 @@ and is between 256 and 4096 characters. It is defined in the file [NFS] set the maximum lifetime for idmapper cache entries. + nfs.enable_ino64= + [NFS] enable 64-bit inode numbers. + If zero, the NFS client will fake up a 32-bit inode + number for the readdir() and stat() syscalls instead + of returning the full 64-bit number. + The default is to return 64-bit inode numbers. + nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels no387 [BUGS=X86-32] Tells the kernel to use the 387 maths emulation library even if a 387 maths coprocessor is present. - noacpi [LIBATA] Disables use of ACPI in libata suspend/resume - when set. - Format: <int> - noaliencache [MM, NUMA, SLAB] Disables the allocation of alien caches in the slab allocator. Saves per-node memory, but will impact performance. @@ -1160,6 +1182,9 @@ and is between 256 and 4096 characters. It is defined in the file nomce [X86-32] Machine Check Exception + nomfgpt [X86-32] Disable Multi-Function General Purpose + Timer usage (for AMD Geode machines). + noreplace-paravirt [X86-32,PV_OPS] Don't patch paravirt_ops noreplace-smp [X86-32,SMP] Don't replace SMP instructions @@ -1270,6 +1295,11 @@ and is between 256 and 4096 characters. It is defined in the file Mechanism 1. conf2 [X86-32] Force use of PCI Configuration Mechanism 2. + noaer [PCIE] If the PCIEAER kernel config parameter is + enabled, this kernel boot option can be used to + disable the use of PCIE advanced error reporting. + nodomains [PCI] Disable support for multiple PCI + root domains (aka PCI segments, in ACPI-speak). nommconf [X86-32,X86_64] Disable use of MMCONFIG for PCI Configuration nomsi [MSI] If the PCI_MSI kernel config parameter is @@ -1314,6 +1344,8 @@ and is between 256 and 4096 characters. It is defined in the file IRQ routing is enabled. noacpi [X86-32] Do not use ACPI for IRQ routing or for PCI scanning. + use_crs [X86-32] Use _CRS for PCI resource + allocation. routeirq Do IRQ routing for all PCI devices. This is normally done in pci_enable_device(), so this option is a temporary workaround @@ -1430,6 +1462,10 @@ and is between 256 and 4096 characters. It is defined in the file pt. [PARIDE] See Documentation/paride.txt. + pty.legacy_count= + [KNL] Number of legacy pty's. Overwrites compiled-in + default number. + quiet [KNL] Disable most log messages r128= [HW,DRM] @@ -1864,9 +1900,6 @@ and is between 256 and 4096 characters. It is defined in the file Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> - tsdev.xres= [TS] Horizontal screen resolution. - tsdev.yres= [TS] Vertical screen resolution. - turbografx.map[2|3]= [HW,JOY] TurboGraFX parallel port interface Format: diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index 8ee49ee7c963..ca86a885ad8f 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -54,7 +54,6 @@ embedded in larger data structures and replace fields they duplicate. struct kobject { const char * k_name; - char name[KOBJ_NAME_LEN]; struct kref kref; struct list_head entry; struct kobject * parent; @@ -223,18 +222,15 @@ decl_subsys(devices, &ktype_device, &device_uevent_ops); is equivalent to doing: struct kset devices_subsys = { - .kobj = { - .name = "devices", - }, .ktype = &ktype_devices, .uevent_ops = &device_uevent_ops, }; - +kobject_set_name(&devices_subsys, name); The objects that are registered with a subsystem that use the subsystem's default list must have their kset ptr set properly. These objects may have embedded kobjects or ksets. The -following helpers make setting the kset easier: +following helper makes setting the kset easier: kobj_set_kset_s(obj,subsys) @@ -242,22 +238,8 @@ kobj_set_kset_s(obj,subsys) - Assumes that obj->kobj exists, and is a struct kobject. - Sets the kset of that kobject to the kset <subsys>. - -kset_set_kset_s(obj,subsys) - -- Assumes that obj->kset exists, and is a struct kset. -- Sets the kset of the embedded kobject to the kset <subsys>. - -subsys_set_kset(obj,subsys) - -- Assumes obj->subsys exists, and is a struct subsystem. -- Sets obj->subsys.kset.kobj.kset to the subsystem's embedded kset. - -void subsystem_init(struct kset *s); int subsystem_register(struct kset *s); void subsystem_unregister(struct kset *s); -struct kset *subsys_get(struct kset *s); -void kset_put(struct kset *s); These are just wrappers around the respective kset_* functions. diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 1da566630831..11340625e363 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -281,6 +281,39 @@ downdelay will be rounded down to the nearest multiple. The default value is 0. +fail_over_mac + + Specifies whether active-backup mode should set all slaves to + the same MAC address (the traditional behavior), or, when + enabled, change the bond's MAC address when changing the + active interface (i.e., fail over the MAC address itself). + + Fail over MAC is useful for devices that cannot ever alter + their MAC address, or for devices that refuse incoming + broadcasts with their own source MAC (which interferes with + the ARP monitor). + + The down side of fail over MAC is that every device on the + network must be updated via gratuitous ARP, vs. just updating + a switch or set of switches (which often takes place for any + traffic, not just ARP traffic, if the switch snoops incoming + traffic to update its tables) for the traditional method. If + the gratuitous ARP is lost, communication may be disrupted. + + When fail over MAC is used in conjuction with the mii monitor, + devices which assert link up prior to being able to actually + transmit and receive are particularly susecptible to loss of + the gratuitous ARP, and an appropriate updelay setting may be + required. + + A value of 0 disables fail over MAC, and is the default. A + value of 1 enables fail over MAC. This option is enabled + automatically if the first slave added cannot change its MAC + address. This option may be modified via sysfs only when no + slaves are present in the bond. + + This option was added in bonding version 3.2.0. + lacp_rate Option specifying the rate in which we'll ask our link partner diff --git a/Documentation/networking/proc_net_tcp.txt b/Documentation/networking/proc_net_tcp.txt index 5e21f7cb6383..4a79209e77a7 100644 --- a/Documentation/networking/proc_net_tcp.txt +++ b/Documentation/networking/proc_net_tcp.txt @@ -1,8 +1,9 @@ This document describes the interfaces /proc/net/tcp and /proc/net/tcp6. +Note that these interfaces are deprecated in favor of tcp_diag. These /proc interfaces provide information about currently active TCP -connections, and are implemented by tcp_get_info() in net/ipv4/tcp_ipv4.c and -tcp6_get_info() in net/ipv6/tcp_ipv6.c, respectively. +connections, and are implemented by tcp4_seq_show() in net/ipv4/tcp_ipv4.c +and tcp6_seq_show() in net/ipv6/tcp_ipv6.c, respectively. It will first list all listening TCP sockets, and next list all established TCP connections. A typical entry of /proc/net/tcp would look like this (split diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX new file mode 100644 index 000000000000..3a2b96302ecc --- /dev/null +++ b/Documentation/s390/00-INDEX @@ -0,0 +1,26 @@ +00-INDEX + - this file. +3270.ChangeLog + - ChangeLog for the UTS Global 3270-support patch (outdated). +3270.txt + - how to use the IBM 3270 display system support. +cds.txt + - s390 common device support (common I/O layer). +CommonIO + - common I/O layer command line parameters, procfs and debugfs entries +config3270.sh + - example configuration for 3270 devices. +DASD + - information on the DASD disk device driver. +Debugging390.txt + - hints for debugging on s390 systems. +driver-model.txt + - information on s390 devices and the driver model. +monreader.txt + - information on accessing the z/VM monitor stream from Linux. +s390dbf.txt + - information on using the s390 debug feature. +TAPE + - information on the driver for channel-attached tapes. +zfcpdump + - information on the s390 SCSI dump tool. diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO index 22f82f21bc60..86320aa3fb0b 100644 --- a/Documentation/s390/CommonIO +++ b/Documentation/s390/CommonIO @@ -1,5 +1,5 @@ -S/390 common I/O-Layer - command line parameters and /proc entries -================================================================== +S/390 common I/O-Layer - command line parameters, procfs and debugfs entries +============================================================================ Command line parameters ----------------------- @@ -7,9 +7,9 @@ Command line parameters * cio_msg = yes | no Determines whether information on found devices and sensed device - characteristics should be shown during startup, i. e. messages of the types - "Detected device 0.0.4711 on subchannel 0.0.0042" and "SenseID: Device - 0.0.4711 reports: ...". + characteristics should be shown during startup or when new devices are + found, i. e. messages of the types "Detected device 0.0.4711 on subchannel + 0.0.0042" and "SenseID: Device 0.0.4711 reports: ...". Default is off. @@ -26,8 +26,10 @@ Command line parameters An ignored device can be un-ignored later; see the "/proc entries"-section for details. - The devices must be given either as bus ids (0.0.abcd) or as hexadecimal - device numbers (0xabcd or abcd, for 2.4 backward compatibility). + The devices must be given either as bus ids (0.x.abcd) or as hexadecimal + device numbers (0xabcd or abcd, for 2.4 backward compatibility). If you + give a device number 0xabcd, it will be interpreted as 0.0.abcd. + You can use the 'all' keyword to ignore all devices. The '!' operator will cause the I/O-layer to _not_ ignore a device. The command line is parsed from left to right. @@ -81,31 +83,36 @@ Command line parameters will add 0.0.a000-0.0.accc and 0.0.af00-0.0.afff to the list of ignored devices. - The devices can be specified either by bus id (0.0.abcd) or, for 2.4 backward - compatibility, by the device number in hexadecimal (0xabcd or abcd). + The devices can be specified either by bus id (0.x.abcd) or, for 2.4 backward + compatibility, by the device number in hexadecimal (0xabcd or abcd). Device + numbers given as 0xabcd will be interpreted as 0.0.abcd. + +* For some of the information present in the /proc filesystem in 2.4 (namely, + /proc/subchannels and /proc/chpids), see driver-model.txt. + Information formerly in /proc/irq_count is now in /proc/interrupts. + +debugfs entries +--------------- -* /proc/s390dbf/cio_*/ (S/390 debug feature) +* /sys/kernel/debug/s390dbf/cio_*/ (S/390 debug feature) Some views generated by the debug feature to hold various debug outputs. - - /proc/s390dbf/cio_crw/sprintf + - /sys/kernel/debug/s390dbf/cio_crw/sprintf Messages from the processing of pending channel report words (machine check - handling), which will also show when CONFIG_DEBUG_CRW is defined. + handling). - - /proc/s390dbf/cio_msg/sprintf - Various debug messages from the common I/O-layer; generally, messages which - will also show when CONFIG_DEBUG_IO is defined. + - /sys/kernel/debug/s390dbf/cio_msg/sprintf + Various debug messages from the common I/O-layer, including messages + printed when cio_msg=yes. - - /proc/s390dbf/cio_trace/hex_ascii + - /sys/kernel/debug/s390dbf/cio_trace/hex_ascii Logs the calling of functions in the common I/O-layer and, if applicable, which subchannel they were called for, as well as dumps of some data structures (like irb in an error case). The level of logging can be changed to be more or less verbose by piping to - /proc/s390dbf/cio_*/level a number between 0 and 6; see the documentation on - the S/390 debug feature (Documentation/s390/s390dbf.txt) for details. - -* For some of the information present in the /proc filesystem in 2.4 (namely, - /proc/subchannels and /proc/chpids), see driver-model.txt. - Information formerly in /proc/irq_count is now in /proc/interrupts. + /sys/kernel/debug/s390dbf/cio_*/level a number between 0 and 6; see the + documentation on the S/390 debug feature (Documentation/s390/s390dbf.txt) + for details. diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt index 58919d6a593a..3081927cc2d6 100644 --- a/Documentation/s390/cds.txt +++ b/Documentation/s390/cds.txt @@ -286,10 +286,10 @@ first: timeout value -EIO: the common I/O layer terminated the request due to an error state -If the concurrent sense flag in the extended status word in the irb is set, the -field irb->scsw.count describes the number of device specific sense bytes -available in the extended control word irb->scsw.ecw[0]. No device sensing by -the device driver itself is required. +If the concurrent sense flag in the extended status word (esw) in the irb is +set, the field erw.scnt in the esw describes the number of device specific +sense bytes available in the extended control word irb->scsw.ecw[]. No device +sensing by the device driver itself is required. The device interrupt handler can use the following definitions to investigate the primary unit check source coded in sense byte 0 : diff --git a/Documentation/sched-design-CFS.txt b/Documentation/sched-design-CFS.txt index 84901e7c0508..88bcb8767335 100644 --- a/Documentation/sched-design-CFS.txt +++ b/Documentation/sched-design-CFS.txt @@ -117,3 +117,70 @@ Some implementation details: iterators of the scheduling modules are used. The balancing code got quite a bit simpler as a result. + +Group scheduler extension to CFS +================================ + +Normally the scheduler operates on individual tasks and strives to provide +fair CPU time to each task. Sometimes, it may be desirable to group tasks +and provide fair CPU time to each such task group. For example, it may +be desirable to first provide fair CPU time to each user on the system +and then to each task belonging to a user. + +CONFIG_FAIR_GROUP_SCHED strives to achieve exactly that. It lets +SCHED_NORMAL/BATCH tasks be be grouped and divides CPU time fairly among such +groups. At present, there are two (mutually exclusive) mechanisms to group +tasks for CPU bandwidth control purpose: + + - Based on user id (CONFIG_FAIR_USER_SCHED) + In this option, tasks are grouped according to their user id. + - Based on "cgroup" pseudo filesystem (CONFIG_FAIR_CGROUP_SCHED) + This options lets the administrator create arbitrary groups + of tasks, using the "cgroup" pseudo filesystem. See + Documentation/cgroups.txt for more information about this + filesystem. + +Only one of these options to group tasks can be chosen and not both. + +Group scheduler tunables: + +When CONFIG_FAIR_USER_SCHED is defined, a directory is created in sysfs for +each new user and a "cpu_share" file is added in that directory. + + # cd /sys/kernel/uids + # cat 512/cpu_share # Display user 512's CPU share + 1024 + # echo 2048 > 512/cpu_share # Modify user 512's CPU share + # cat 512/cpu_share # Display user 512's CPU share + 2048 + # + +CPU bandwidth between two users are divided in the ratio of their CPU shares. +For ex: if you would like user "root" to get twice the bandwidth of user +"guest", then set the cpu_share for both the users such that "root"'s +cpu_share is twice "guest"'s cpu_share + + +When CONFIG_FAIR_CGROUP_SCHED is defined, a "cpu.shares" file is created +for each group created using the pseudo filesystem. See example steps +below to create task groups and modify their CPU share using the "cgroups" +pseudo filesystem + + # mkdir /dev/cpuctl + # mount -t cgroup -ocpu none /dev/cpuctl + # cd /dev/cpuctl + + # mkdir multimedia # create "multimedia" group of tasks + # mkdir browser # create "browser" group of tasks + + # #Configure the multimedia group to receive twice the CPU bandwidth + # #that of browser group + + # echo 2048 > multimedia/cpu.shares + # echo 1024 > browser/cpu.shares + + # firefox & # Launch firefox and move it to "browser" group + # echo <firefox_pid> > browser/tasks + + # #Launch gmplayer (or your favourite movie player) + # echo <movie_player_pid> > multimedia/tasks diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index 12354830c6b0..aa1f7e927834 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -2,14 +2,20 @@ - this file 53c700.txt - info on driver for 53c700 based adapters -AM53C974.txt - - info on driver for AM53c974 based adapters BusLogic.txt - info on driver for adapters with BusLogic chips -ChangeLog +ChangeLog.1992-1997 - Changes to scsi files, if not listed elsewhere +ChangeLog.arcmsr + - Changes to driver for ARECA's SATA RAID controller cards ChangeLog.ips - IBM ServeRAID driver Changelog +ChangeLog.lpfc + - Changes to lpfc driver +ChangeLog.megaraid + - Changes to LSI megaraid controller. +ChangeLog.megaraid_sas + - Changes to serial attached scsi version of LSI megaraid controller. ChangeLog.ncr53c8xx - Changes to ncr53c8xx driver ChangeLog.sym53c8xx @@ -20,26 +26,44 @@ FlashPoint.txt - info on driver for BusLogic FlashPoint adapters LICENSE.FlashPoint - Licence of the Flashpoint driver +LICENSE.qla2xxx + - License for QLogic Linux Fibre Channel HBA Driver firmware. Mylex.txt - info on driver for Mylex adapters NinjaSCSI.txt - info on WorkBiT NinjaSCSI-32/32Bi driver +aacraid.txt + - Driver supporting Adaptec RAID controllers aha152x.txt - info on driver for Adaptec AHA152x based adapters +aic79xx.txt + - Adaptec Ultra320 SCSI host adapters aic7xxx.txt - info on driver for Adaptec controllers aic7xxx_old.txt - info on driver for Adaptec controllers, old generation +arcmsr_spec.txt + - ARECA FIRMWARE SPEC (for IOP331 adapter) +dc395x.txt + - README file for the dc395x SCSI driver dpti.txt - info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters dtc3x80.txt - info on driver for DTC 2x80 based adapters g_NCR5380.txt - info on driver for NCR5380 and NCR53c400 based adapters +hptiop.txt + - HIGHPOINT ROCKETRAID 3xxx RAID DRIVER ibmmca.txt - info on driver for IBM adapters with MCA bus in2000.txt - info on in2000 driver +libsas.txt + - Serial Attached SCSI management layer. +lpfc.txt + - LPFC driver release notes +megaraid.txt + - Common Management Module, shared code handling ioctls for LSI drivers ncr53c7xx.txt - info on driver for NCR53c7xx based adapters ncr53c8xx.txt @@ -50,6 +74,8 @@ ppa.txt - info on driver for IOmega zip drive qlogicfas.txt - info on driver for QLogic FASxxx based adapters +scsi-changer.txt + - README for the SCSI media changer driver scsi-generic.txt - info on the sg driver for generic (non-disk/CD/tape) SCSI devices. scsi.txt @@ -58,6 +84,8 @@ scsi_mid_low_api.txt - info on API between SCSI layer and low level drivers scsi_eh.txt - info on SCSI midlayer error handling infrastructure +scsi_fc_transport.txt + - SCSI Fiber Channel Tansport st.txt - info on scsi tape driver sym53c500_cs.txt diff --git a/Documentation/scsi/ChangeLog.arcmsr b/Documentation/scsi/ChangeLog.arcmsr index 162c47fdf45f..cd8403a33ee6 100644 --- a/Documentation/scsi/ChangeLog.arcmsr +++ b/Documentation/scsi/ChangeLog.arcmsr @@ -53,4 +53,19 @@ ** for linux standard list ** enable usage of pci message signal interrupt ** follow Randy.Danlup kindness suggestion cleanup this code -**************************************************************************
\ No newline at end of file +** 1.20.00.14 05/02/2007 Erich Chen & Nick Cheng +** 1.implement PCI-Express error recovery function and AER capability +** 2.implement the selection of ARCMSR_MAX_XFER_SECTORS_B=4096 +** if firmware version is newer than 1.42 +** 3.modify arcmsr_iop_reset to improve the ability +** 4.modify the ISR, arcmsr_interrupt routine,to prevent the +** inconsistency with sg_mod driver if application directly calls +** the arcmsr driver w/o passing through scsi mid layer +** specially thanks to Yanmin Zhang's openhanded help about AER +** 1.20.00.15 08/30/2007 Erich Chen & Nick Cheng +** 1. support ARC1200/1201/1202 SATA RAID adapter, which is named +** ACB_ADAPTER_TYPE_B +** 2. modify the arcmsr_pci_slot_reset function +** 3. modify the arcmsr_pci_ers_disconnect_forepart function +** 4. modify the arcmsr_pci_ers_need_reset_forepart function +************************************************************************** diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt index cc12b55d4b3d..a8257840695a 100644 --- a/Documentation/scsi/aacraid.txt +++ b/Documentation/scsi/aacraid.txt @@ -38,10 +38,8 @@ Supported Cards/Chipsets 9005:0286:9005:02ac Adaptec 1800 (Typhoon44) 9005:0285:9005:02b5 Adaptec 5445 (Voodoo44) 9005:0285:15d9:02b5 SMC AOC-USAS-S4i - 9005:0285:15d9:02c9 SMC AOC-USAS-S4iR 9005:0285:9005:02b6 Adaptec 5805 (Voodoo80) 9005:0285:15d9:02b6 SMC AOC-USAS-S8i - 9005:0285:15d9:02ca SMC AOC-USAS-S8iR 9005:0285:9005:02b7 Adaptec 5085 (Voodoo08) 9005:0285:9005:02bb Adaptec 3405 (Marauder40LP) 9005:0285:9005:02bc Adaptec 3805 (Marauder80LP) @@ -50,9 +48,14 @@ Supported Cards/Chipsets 9005:0285:9005:02be Adaptec 31605 (Marauder160) 9005:0285:9005:02c3 Adaptec 51205 (Voodoo120) 9005:0285:9005:02c4 Adaptec 51605 (Voodoo160) + 9005:0285:15d9:02c9 SMC AOC-USAS-S4iR + 9005:0285:15d9:02ca SMC AOC-USAS-S8iR 9005:0285:9005:02ce Adaptec 51245 (Voodoo124) 9005:0285:9005:02cf Adaptec 51645 (Voodoo164) 9005:0285:9005:02d0 Adaptec 52445 (Voodoo244) + 9005:0285:9005:02d1 Adaptec 5405 (Voodoo40) + 9005:0285:15d9:02d2 SMC AOC-USAS-S8i-LP + 9005:0285:15d9:02d3 SMC AOC-USAS-S8iR-LP 1011:0046:9005:0364 Adaptec 5400S (Mustang) 9005:0287:9005:0800 Adaptec Themisto (Jupiter) 9005:0200:9005:0200 Adaptec Themisto (Jupiter) @@ -103,6 +106,7 @@ Supported Cards/Chipsets 9005:0285:108e:7aac SUN STK RAID REM (Voodoo44 Coyote) 9005:0285:108e:0286 SUN STK RAID INT (Cougar) 9005:0285:108e:0287 SUN STK RAID EXT (Prometheus) + 9005:0285:108e:7aae SUN STK RAID EM (Narvi) People ------------------------- diff --git a/Documentation/scsi/advansys.txt b/Documentation/scsi/advansys.txt new file mode 100644 index 000000000000..4a3db62b7424 --- /dev/null +++ b/Documentation/scsi/advansys.txt @@ -0,0 +1,243 @@ +AdvanSys (Advanced System Products, Inc.) manufactures the following +RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow +(8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI +buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit +transfer) SCSI Host Adapters for the PCI bus. + +The CDB counts below indicate the number of SCSI CDB (Command +Descriptor Block) requests that can be stored in the RISC chip +cache and board LRAM. A CDB is a single SCSI command. The driver +detect routine will display the number of CDBs available for each +adapter detected. The number of CDBs used by the driver can be +lowered in the BIOS by changing the 'Host Queue Size' adapter setting. + +Laptop Products: + ABP-480 - Bus-Master CardBus (16 CDB) + +Connectivity Products: + ABP510/5150 - Bus-Master ISA (240 CDB) + ABP5140 - Bus-Master ISA PnP (16 CDB) + ABP5142 - Bus-Master ISA PnP with floppy (16 CDB) + ABP902/3902 - Bus-Master PCI (16 CDB) + ABP3905 - Bus-Master PCI (16 CDB) + ABP915 - Bus-Master PCI (16 CDB) + ABP920 - Bus-Master PCI (16 CDB) + ABP3922 - Bus-Master PCI (16 CDB) + ABP3925 - Bus-Master PCI (16 CDB) + ABP930 - Bus-Master PCI (16 CDB) + ABP930U - Bus-Master PCI Ultra (16 CDB) + ABP930UA - Bus-Master PCI Ultra (16 CDB) + ABP960 - Bus-Master PCI MAC/PC (16 CDB) + ABP960U - Bus-Master PCI MAC/PC Ultra (16 CDB) + +Single Channel Products: + ABP542 - Bus-Master ISA with floppy (240 CDB) + ABP742 - Bus-Master EISA (240 CDB) + ABP842 - Bus-Master VL (240 CDB) + ABP940 - Bus-Master PCI (240 CDB) + ABP940U - Bus-Master PCI Ultra (240 CDB) + ABP940UA/3940UA - Bus-Master PCI Ultra (240 CDB) + ABP970 - Bus-Master PCI MAC/PC (240 CDB) + ABP970U - Bus-Master PCI MAC/PC Ultra (240 CDB) + ABP3960UA - Bus-Master PCI MAC/PC Ultra (240 CDB) + ABP940UW/3940UW - Bus-Master PCI Ultra-Wide (253 CDB) + ABP970UW - Bus-Master PCI MAC/PC Ultra-Wide (253 CDB) + ABP3940U2W - Bus-Master PCI LVD/Ultra2-Wide (253 CDB) + +Multi-Channel Products: + ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel) + ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel) + ABP950 - Dual Channel Bus-Master PCI (240 CDB Per Channel) + ABP950UW - Dual Channel Bus-Master PCI Ultra-Wide (253 CDB Per Channel) + ABP980 - Four Channel Bus-Master PCI (240 CDB Per Channel) + ABP980U - Four Channel Bus-Master PCI Ultra (240 CDB Per Channel) + ABP980UA/3980UA - Four Channel Bus-Master PCI Ultra (16 CDB Per Chan.) + ABP3950U2W - Bus-Master PCI LVD/Ultra2-Wide and Ultra-Wide (253 CDB) + ABP3950U3W - Bus-Master PCI Dual LVD2/Ultra3-Wide (253 CDB) + +Driver Compile Time Options and Debugging + +The following constants can be defined in the source file. + +1. ADVANSYS_ASSERT - Enable driver assertions (Def: Enabled) + + Enabling this option adds assertion logic statements to the + driver. If an assertion fails a message will be displayed to + the console, but the system will continue to operate. Any + assertions encountered should be reported to the person + responsible for the driver. Assertion statements may proactively + detect problems with the driver and facilitate fixing these + problems. Enabling assertions will add a small overhead to the + execution of the driver. + +2. ADVANSYS_DEBUG - Enable driver debugging (Def: Disabled) + + Enabling this option adds tracing functions to the driver and the + ability to set a driver tracing level at boot time. This option is + very useful for debugging the driver, but it will add to the size + of the driver execution image and add overhead to the execution of + the driver. + + The amount of debugging output can be controlled with the global + variable 'asc_dbglvl'. The higher the number the more output. By + default the debug level is 0. + + If the driver is loaded at boot time and the LILO Driver Option + is included in the system, the debug level can be changed by + specifying a 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port. The + first three hex digits of the pseudo I/O Port must be set to + 'deb' and the fourth hex digit specifies the debug level: 0 - F. + The following command line will look for an adapter at 0x330 + and set the debug level to 2. + + linux advansys=0x330,0,0,0,0xdeb2 + + If the driver is built as a loadable module this variable can be + defined when the driver is loaded. The following insmod command + will set the debug level to one. + + insmod advansys.o asc_dbglvl=1 + + Debugging Message Levels: + 0: Errors Only + 1: High-Level Tracing + 2-N: Verbose Tracing + + To enable debug output to console, please make sure that: + + a. System and kernel logging is enabled (syslogd, klogd running). + b. Kernel messages are routed to console output. Check + /etc/syslog.conf for an entry similar to this: + + kern.* /dev/console + + c. klogd is started with the appropriate -c parameter + (e.g. klogd -c 8) + + This will cause printk() messages to be be displayed on the + current console. Refer to the klogd(8) and syslogd(8) man pages + for details. + + Alternatively you can enable printk() to console with this + program. However, this is not the 'official' way to do this. + Debug output is logged in /var/log/messages. + + main() + { + syscall(103, 7, 0, 0); + } + + Increasing LOG_BUF_LEN in kernel/printk.c to something like + 40960 allows more debug messages to be buffered in the kernel + and written to the console or log file. + +3. ADVANSYS_STATS - Enable statistics (Def: Enabled) + + Enabling this option adds statistics collection and display + through /proc to the driver. The information is useful for + monitoring driver and device performance. It will add to the + size of the driver execution image and add minor overhead to + the execution of the driver. + + Statistics are maintained on a per adapter basis. Driver entry + point call counts and transfer size counts are maintained. + Statistics are only available for kernels greater than or equal + to v1.3.0 with the CONFIG_PROC_FS (/proc) file system configured. + + AdvanSys SCSI adapter files have the following path name format: + + /proc/scsi/advansys/{0,1,2,3,...} + + This information can be displayed with cat. For example: + + cat /proc/scsi/advansys/0 + + When ADVANSYS_STATS is not defined the AdvanSys /proc files only + contain adapter and device configuration information. + +Driver LILO Option + +If init/main.c is modified as described in the 'Directions for Adding +the AdvanSys Driver to Linux' section (B.4.) above, the driver will +recognize the 'advansys' LILO command line and /etc/lilo.conf option. +This option can be used to either disable I/O port scanning or to limit +scanning to 1 - 4 I/O ports. Regardless of the option setting EISA and +PCI boards will still be searched for and detected. This option only +affects searching for ISA and VL boards. + +Examples: + 1. Eliminate I/O port scanning: + boot: linux advansys= + or + boot: linux advansys=0x0 + 2. Limit I/O port scanning to one I/O port: + boot: linux advansys=0x110 + 3. Limit I/O port scanning to four I/O ports: + boot: linux advansys=0x110,0x210,0x230,0x330 + +For a loadable module the same effect can be achieved by setting +the 'asc_iopflag' variable and 'asc_ioport' array when loading +the driver, e.g. + + insmod advansys.o asc_iopflag=1 asc_ioport=0x110,0x330 + +If ADVANSYS_DEBUG is defined a 5th (ASC_NUM_IOPORT_PROBE + 1) +I/O Port may be added to specify the driver debug level. Refer to +the 'Driver Compile Time Options and Debugging' section above for +more information. + +Credits (Chronological Order) + +Bob Frey <bfrey@turbolinux.com.cn> wrote the AdvanSys SCSI driver +and maintained it up to 3.3F. He continues to answer questions +and help maintain the driver. + +Nathan Hartwell <mage@cdc3.cdc.net> provided the directions and +basis for the Linux v1.3.X changes which were included in the +1.2 release. + +Thomas E Zerucha <zerucha@shell.portal.com> pointed out a bug +in advansys_biosparam() which was fixed in the 1.3 release. + +Erik Ratcliffe <erik@caldera.com> has done testing of the +AdvanSys driver in the Caldera releases. + +Rik van Riel <H.H.vanRiel@fys.ruu.nl> provided a patch to +AscWaitTixISRDone() which he found necessary to make the +driver work with a SCSI-1 disk. + +Mark Moran <mmoran@mmoran.com> has helped test Ultra-Wide +support in the 3.1A driver. + +Doug Gilbert <dgilbert@interlog.com> has made changes and +suggestions to improve the driver and done a lot of testing. + +Ken Mort <ken@mort.net> reported a DEBUG compile bug fixed +in 3.2K. + +Tom Rini <trini@kernel.crashing.org> provided the CONFIG_ISA +patch and helped with PowerPC wide and narrow board support. + +Philip Blundell <philb@gnu.org> provided an +advansys_interrupts_enabled patch. + +Dave Jones <dave@denial.force9.co.uk> reported the compiler +warnings generated when CONFIG_PROC_FS was not defined in +the 3.2M driver. + +Jerry Quinn <jlquinn@us.ibm.com> fixed PowerPC support (endian +problems) for wide cards. + +Bryan Henderson <bryanh@giraffe-data.com> helped debug narrow +card error handling. + +Manuel Veloso <veloso@pobox.com> worked hard on PowerPC narrow +board support and fixed a bug in AscGetEEPConfig(). + +Arnaldo Carvalho de Melo <acme@conectiva.com.br> made +save_flags/restore_flags changes. + +Andy Kellner <AKellner@connectcom.net> continued the Advansys SCSI +driver development for ConnectCom (Version > 3.3F). + +Ken Witherow for extensive testing during the development of version 3.4. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 241e26c4ff92..4b48c2e82c3c 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -365,13 +365,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-cmipci ----------------- - Module for C-Media CMI8338 and 8738 PCI sound cards. + Module for C-Media CMI8338/8738/8768/8770 PCI sound cards. - mpu_port - 0x300,0x310,0x320,0x330 = legacy port, - 1 = integrated PCI port, + mpu_port - port address of MIDI interface (8338 only): + 0x300,0x310,0x320,0x330 = legacy port, 0 = disable (default) - fm_port - 0x388 = legacy port, - 1 = integrated PCI port (default), + fm_port - port address of OPL-3 FM synthesizer (8x38 only): + 0x388 = legacy port, + 1 = integrated PCI port (default on 8738), 0 = disable soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only) (default = 1) @@ -768,6 +769,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. single_cmd - Use single immediate commands to communicate with codecs (for debugging only) enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) + power_save - Automatic power-saving timtout (in second, 0 = + disable) + power_save_controller - Reset HD-audio controller in power-saving mode + (default = on) This module supports one card and autoprobe. @@ -828,6 +833,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC268 3stack 3-stack model + toshiba Toshiba A205 + acer Acer laptops auto auto-config reading BIOS (default) ALC662 @@ -842,7 +849,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack-dig 3-jack with SPDIF I/O 6stack-dig 6-jack digital with SPDIF I/O arima Arima W820Di1 + targa Targa T8, MSI-1049 T8 + asus-a7j ASUS A7J + asus-a7m ASUS A7M macpro MacPro support + mbp3 Macbook Pro rev3 imac24 iMac 24'' with jack detection w2jc ASUS W2JC auto auto-config reading BIOS (default) @@ -854,6 +865,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O 6stack-dig-demo 6-jack digital for Intel demo board acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) + acer-aspire Acer Aspire 9810 medion Medion Laptops medion-md2 Medion MD2 targa-dig Targa/MSI @@ -862,6 +874,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo-101e Lenovo 101E lenovo-nb0763 Lenovo NB0763 lenovo-ms7195-dig Lenovo MS7195 + haier-w66 Haier W66 6stack-hp HP machines with 6stack (Nettle boards) 3stack-hp HP machines with 3stack (Lucknow, Samba boards) auto auto-config reading BIOS (default) @@ -885,6 +898,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD) lenovo Lenovo 3000 C200 dallas Dallas laptops + hp HP TX1000 auto auto-config reading BIOS (default) CMI9880 @@ -920,6 +934,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack 3-stack, shared surrounds laptop 2-channel only (FSC V2060, Samsung M50) laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J) + laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100) ultra 2-channel with EAPD (Samsung Ultra tablet PC) AD1988 @@ -945,14 +960,30 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. can be adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y - STAC9200/9205/9254 + STAC9200 ref Reference board + dell-d21 Dell (unknown) + dell-d22 Dell (unknown) + dell-d23 Dell (unknown) + dell-m21 Dell Inspiron 630m, Dell Inspiron 640m + dell-m22 Dell Latitude D620, Dell Latitude D820 + dell-m23 Dell XPS M1710, Dell Precision M90 + dell-m24 Dell Latitude 120L + dell-m25 Dell Inspiron E1505n + dell-m26 Dell Inspiron 1501 + dell-m27 Dell Inspiron E1705/9400 + gateway Gateway laptops with EAPD control + + STAC9205/9254 + ref Reference board + dell-m42 Dell (unknown) + dell-m43 Dell Precision + dell-m44 Dell Inspiron STAC9220/9221 ref Reference board 3stack D945 3stack 5stack D945 5stack + SPDIF - dell Dell XPS M1210 intel-mac-v1 Intel Mac Type 1 intel-mac-v2 Intel Mac Type 2 intel-mac-v3 Intel Mac Type 3 @@ -964,6 +995,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3) imac-intel Intel iMac (eq. type 2) imac-intel-20 Intel iMac (newer version) (eq. type 3) + dell-d81 Dell (unknown) + dell-d82 Dell (unknown) + dell-m81 Dell (unknown) + dell-m82 Dell XPS M1210 STAC9202/9250/9251 ref Reference board, base config @@ -975,6 +1010,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ref Reference board 3stack D965 3stack 5stack D965 5stack + SPDIF + dell-3stack Dell Dimension E520 STAC9872 vaio Setup for VAIO FE550G/SZ110 @@ -989,6 +1025,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel ML (see the section "Links and Addresses"). + power_save and power_save_controller options are for power-saving + mode. See powersave.txt for details. + Note 2: If you get click noises on output, try the module option position_fix=1 or 2. position_fix=1 will use the SD_LPIB register value without FIFO size correction as the current @@ -1349,7 +1388,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. port - port number or -1 (disable) irq - IRQ number or -1 (disable) pnp - PnP detection - 0 = disable, 1 = enable (default) - uart_enter - Issue UART_ENTER command at open - bool, default = on This module supports multiple devices and PnP. @@ -1630,6 +1668,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-sc6000 + ----------------- + + Module for Gallant SC-6000 soundcard. + + port - Port # (0x220 or 0x240) + mss_port - MSS Port # (0x530 or 0xe80) + irq - IRQ # (5,7,9,10,11) + mpu_irq - MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq + dma - DMA # (1,3,0) + + This module supports multiple cards. + + This card is also known as Audio Excel DSP 16 or Zoltrix AV302. + Module snd-sgalaxy ------------------ @@ -1650,9 +1703,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for ENSONIQ SoundScape PnP cards. port - Port # (PnP setup) + wss_port - WSS Port # (PnP setup) irq - IRQ # (PnP setup) mpu_irq - MPU-401 IRQ # (PnP setup) dma - DMA # (PnP setup) + dma2 - 2nd DMA # (PnP setup, -1 to disable) This module supports multiple cards. ISA PnP must be enabled. You need sscape_ctl tool in alsa-tools package for loading @@ -1697,8 +1752,52 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. dma2 - DMA2 # for CS4232 PCM interface. isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + The below are options for wavefront_synth features: + wf_raw - Assume that we need to boot the OS (default:no) + If yes, then during driver loading, the state of the board is + ignored, and we reset the board and load the firmware anyway. + fx_raw - Assume that the FX process needs help (default:yes) + If false, we'll leave the FX processor in whatever state it is + when the driver is loaded. The default is to download the + microprogram and associated coefficients to set it up for + "default" operation, whatever that means. + debug_default - Debug parameters for card initialization + wait_usecs - How long to wait without sleeping, usecs + (default:150) + This magic number seems to give pretty optimal throughput + based on my limited experimentation. + If you want to play around with it and find a better value, be + my guest. Remember, the idea is to get a number that causes us + to just busy wait for as many WaveFront commands as possible, + without coming up with a number so large that we hog the whole + CPU. + Specifically, with this number, out of about 134,000 status + waits, only about 250 result in a sleep. + sleep_interval - How long to sleep when waiting for reply + (default: 100) + sleep_tries - How many times to try sleeping during a wait + (default: 50) + ospath - Pathname to processed ICS2115 OS firmware + (default:wavefront.os) + The path name of the ISC2115 OS firmware. In the recent + version, it's handled via firmware loader framework, so it + must be installed in the proper path, typically, + /lib/firmware. + reset_time - How long to wait for a reset to take effect + (default:2) + ramcheck_time - How many seconds to wait for the RAM test + (default:20) + osrun_time - How many seconds to wait for the ICS2115 OS + (default:10) + This module supports multiple cards and ISA PnP. + Note: the firmware file "wavefront.os" was located in the earlier + version in /etc. Now it's loaded via firmware loader, and + must be in the proper firmware path, such as /lib/firmware. + Copy (or symlink) the file appropriately if you get an error + regarding firmware downloading after upgrading the kernel. + Module snd-sonicvibes --------------------- diff --git a/Documentation/sound/alsa/CMIPCI.txt b/Documentation/sound/alsa/CMIPCI.txt index 4b2b15387056..16935c8561f7 100644 --- a/Documentation/sound/alsa/CMIPCI.txt +++ b/Documentation/sound/alsa/CMIPCI.txt @@ -1,5 +1,5 @@ - Brief Notes on C-Media 8738/8338 Driver - ======================================= + Brief Notes on C-Media 8338/8738/8768/8770 Driver + ================================================= Takashi Iwai <tiwai@suse.de> @@ -209,10 +209,13 @@ In addition to the standard SB mixer, CM8x38 provides more functions. MIDI CONTROLLER --------------- -The MPU401-UART interface is disabled as default. You need to set -module option "mpu_port" with a valid I/O port address to enable the -MIDI support. The valid I/O ports are 0x300, 0x310, 0x320 and 0x330. -Choose the value which doesn't conflict with other cards. +With CMI8338 chips, the MPU401-UART interface is disabled as default. +You need to set the module option "mpu_port" to a valid I/O port address +to enable MIDI support. Valid I/O ports are 0x300, 0x310, 0x320 and +0x330. Choose a value that doesn't conflict with other cards. + +With CMI8738 and newer chips, the MIDI interface is enabled by default +and the driver automatically chooses a port address. There is _no_ hardware wavetable function on this chip (except for OPL3 synth below). @@ -230,6 +233,8 @@ Set "fm_port" module option for more cards. The output quality of FM OPL/3 is, however, very weird. I don't know why.. +CMI8768 and newer chips do not have the FM synth. + Joystick and Modem ------------------ diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index 74d3a35b59bc..2c3fc3cb3b6b 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -18,8 +18,8 @@ </affiliation> </author> - <date>November 17, 2005</date> - <edition>0.3.6</edition> + <date>September 10, 2007</date> + <edition>0.3.7</edition> <abstract> <para> @@ -405,8 +405,9 @@ /* definition of the chip-specific record */ struct mychip { struct snd_card *card; - // rest of implementation will be in the section - // "PCI Resource Managements" + /* rest of implementation will be in the section + * "PCI Resource Managements" + */ }; /* chip-specific destructor @@ -414,7 +415,7 @@ */ static int snd_mychip_free(struct mychip *chip) { - .... // will be implemented later... + .... /* will be implemented later... */ } /* component-destructor @@ -440,8 +441,9 @@ *rchip = NULL; - // check PCI availability here - // (see "PCI Resource Managements") + /* check PCI availability here + * (see "PCI Resource Managements") + */ .... /* allocate a chip-specific data with zero filled */ @@ -451,12 +453,13 @@ chip->card = card; - // rest of initialization here; will be implemented - // later, see "PCI Resource Managements" + /* rest of initialization here; will be implemented + * later, see "PCI Resource Managements" + */ .... - if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, - chip, &ops)) < 0) { + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) { snd_mychip_free(chip); return err; } @@ -490,7 +493,8 @@ return -ENOMEM; /* (3) */ - if ((err = snd_mychip_create(card, pci, &chip)) < 0) { + err = snd_mychip_create(card, pci, &chip); + if (err < 0) { snd_card_free(card); return err; } @@ -502,10 +506,11 @@ card->shortname, chip->ioport, chip->irq); /* (5) */ - .... // implemented later + .... /* implemented later */ /* (6) */ - if ((err = snd_card_register(card)) < 0) { + err = snd_card_register(card); + if (err < 0) { snd_card_free(card); return err; } @@ -605,7 +610,8 @@ <![CDATA[ struct mychip *chip; .... - if ((err = snd_mychip_create(card, pci, &chip)) < 0) { + err = snd_mychip_create(card, pci, &chip); + if (err < 0) { snd_card_free(card); return err; } @@ -666,7 +672,8 @@ <informalexample> <programlisting> <![CDATA[ - if ((err = snd_card_register(card)) < 0) { + err = snd_card_register(card); + if (err < 0) { snd_card_free(card); return err; } @@ -1091,7 +1098,7 @@ static int snd_mychip_free(struct mychip *chip) { /* disable hardware here if any */ - .... // (not implemented in this document) + .... /* (not implemented in this document) */ /* release the irq */ if (chip->irq >= 0) @@ -1119,7 +1126,8 @@ *rchip = NULL; /* initialize the PCI entry */ - if ((err = pci_enable_device(pci)) < 0) + err = pci_enable_device(pci); + if (err < 0) return err; /* check PCI availability (28bit DMA) */ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 || @@ -1141,7 +1149,8 @@ chip->irq = -1; /* (1) PCI resource allocation */ - if ((err = pci_request_regions(pci, "My Chip")) < 0) { + err = pci_request_regions(pci, "My Chip"); + if (err < 0) { kfree(chip); pci_disable_device(pci); return err; @@ -1156,10 +1165,10 @@ chip->irq = pci->irq; /* (2) initialization of the chip hardware */ - .... // (not implemented in this document) + .... /* (not implemented in this document) */ - if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, - chip, &ops)) < 0) { + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) { snd_mychip_free(chip); return err; } @@ -1233,7 +1242,8 @@ <informalexample> <programlisting> <![CDATA[ - if ((err = pci_enable_device(pci)) < 0) + err = pci_enable_device(pci); + if (err < 0) return err; if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 || pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) { @@ -1294,7 +1304,8 @@ <informalexample> <programlisting> <![CDATA[ - if ((err = pci_request_regions(pci, "My Chip")) < 0) { + err = pci_request_regions(pci, "My Chip"); + if (err < 0) { kfree(chip); pci_disable_device(pci); return err; @@ -1322,7 +1333,7 @@ <programlisting> <![CDATA[ if (request_irq(pci->irq, snd_mychip_interrupt, - IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) { + IRQF_SHARED, "My Chip", chip)) { printk(KERN_ERR "cannot grab irq %d\n", pci->irq); snd_mychip_free(chip); return -EBUSY; @@ -1773,7 +1784,8 @@ struct snd_pcm_runtime *runtime = substream->runtime; runtime->hw = snd_mychip_playback_hw; - // more hardware-initialization will be done here + /* more hardware-initialization will be done here */ + .... return 0; } @@ -1781,7 +1793,8 @@ static int snd_mychip_playback_close(struct snd_pcm_substream *substream) { struct mychip *chip = snd_pcm_substream_chip(substream); - // the hardware-specific codes will be here + /* the hardware-specific codes will be here */ + .... return 0; } @@ -1793,7 +1806,8 @@ struct snd_pcm_runtime *runtime = substream->runtime; runtime->hw = snd_mychip_capture_hw; - // more hardware-initialization will be done here + /* more hardware-initialization will be done here */ + .... return 0; } @@ -1801,7 +1815,8 @@ static int snd_mychip_capture_close(struct snd_pcm_substream *substream) { struct mychip *chip = snd_pcm_substream_chip(substream); - // the hardware-specific codes will be here + /* the hardware-specific codes will be here */ + .... return 0; } @@ -1844,10 +1859,12 @@ { switch (cmd) { case SNDRV_PCM_TRIGGER_START: - // do something to start the PCM engine + /* do something to start the PCM engine */ + .... break; case SNDRV_PCM_TRIGGER_STOP: - // do something to stop the PCM engine + /* do something to stop the PCM engine */ + .... break; default: return -EINVAL; @@ -1900,8 +1917,8 @@ struct snd_pcm *pcm; int err; - if ((err = snd_pcm_new(chip->card, "My Chip", 0, 1, 1, - &pcm)) < 0) + err = snd_pcm_new(chip->card, "My Chip", 0, 1, 1, &pcm); + if (err < 0) return err; pcm->private_data = chip; strcpy(pcm->name, "My Chip"); @@ -1939,8 +1956,8 @@ struct snd_pcm *pcm; int err; - if ((err = snd_pcm_new(chip->card, "My Chip", 0, 1, 1, - &pcm)) < 0) + err = snd_pcm_new(chip->card, "My Chip", 0, 1, 1, &pcm); + if (err < 0) return err; pcm->private_data = chip; strcpy(pcm->name, "My Chip"); @@ -2097,7 +2114,7 @@ struct mychip *chip = snd_pcm_chip(pcm); /* free your own data */ kfree(chip->my_private_pcm_data); - // do what you like else + /* do what you like else */ .... } @@ -2884,10 +2901,10 @@ struct _snd_pcm_runtime { <![CDATA[ switch (cmd) { case SNDRV_PCM_TRIGGER_START: - // do something to start the PCM engine + /* do something to start the PCM engine */ break; case SNDRV_PCM_TRIGGER_STOP: - // do something to stop the PCM engine + /* do something to stop the PCM engine */ break; default: return -EINVAL; @@ -3071,7 +3088,7 @@ struct _snd_pcm_runtime { spin_unlock(&chip->lock); snd_pcm_period_elapsed(chip->substream); spin_lock(&chip->lock); - // acknowledge the interrupt if necessary + /* acknowledge the interrupt if necessary */ } .... spin_unlock(&chip->lock); @@ -3134,7 +3151,7 @@ struct _snd_pcm_runtime { snd_pcm_period_elapsed(substream); spin_lock(&chip->lock); } - // acknowledge the interrupt if necessary + /* acknowledge the interrupt if necessary */ } .... spin_unlock(&chip->lock); @@ -3456,6 +3473,13 @@ struct _snd_pcm_runtime { </para> <para> + The <structfield>tlv</structfield> field can be used to provide + metadata about the control; see the + <link linkend="control-interface-tlv"> + <citetitle>Metadata</citetitle></link> subsection. + </para> + + <para> The other three are <link linkend="control-interface-callbacks"><citetitle> callback functions</citetitle></link>. @@ -3604,7 +3628,7 @@ struct _snd_pcm_runtime { <title>Example of info callback</title> <programlisting> <![CDATA[ - static int snd_myctl_info(struct snd_kcontrol *kcontrol, + static int snd_myctl_mono_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; @@ -3639,7 +3663,7 @@ struct _snd_pcm_runtime { <informalexample> <programlisting> <![CDATA[ - static int snd_myctl_info(struct snd_kcontrol *kcontrol, + static int snd_myctl_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[4] = { @@ -3658,6 +3682,16 @@ struct _snd_pcm_runtime { </programlisting> </informalexample> </para> + + <para> + Some common info callbacks are prepared for easy use: + <function>snd_ctl_boolean_mono_info()</function> and + <function>snd_ctl_boolean_stereo_info()</function>. + Obviously, the former is an info callback for a mono channel + boolean item, just like <function>snd_myctl_mono_info</function> + above, and the latter is for a stereo channel boolean item. + </para> + </section> <section id="control-interface-callbacks-get"> @@ -3794,7 +3828,8 @@ struct _snd_pcm_runtime { <informalexample> <programlisting> <![CDATA[ - if ((err = snd_ctl_add(card, snd_ctl_new1(&my_control, chip))) < 0) + err = snd_ctl_add(card, snd_ctl_new1(&my_control, chip)); + if (err < 0) return err; ]]> </programlisting> @@ -3843,6 +3878,56 @@ struct _snd_pcm_runtime { </para> </section> + <section id="control-interface-tlv"> + <title>Metadata</title> + <para> + To provide information about the dB values of a mixer control, use + on of the <constant>DECLARE_TLV_xxx</constant> macros from + <filename><sound/tlv.h></filename> to define a variable + containing this information, set the<structfield>tlv.p + </structfield> field to point to this variable, and include the + <constant>SNDRV_CTL_ELEM_ACCESS_TLV_READ</constant> flag in the + <structfield>access</structfield> field; like this: + <informalexample> + <programlisting> +<![CDATA[ + static DECLARE_TLV_DB_SCALE(db_scale_my_control, -4050, 150, 0); + + static struct snd_kcontrol_new my_control __devinitdata = { + ... + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + ... + .tlv.p = db_scale_my_control, + }; +]]> + </programlisting> + </informalexample> + </para> + + <para> + The <function>DECLARE_TLV_DB_SCALE</function> macro defines + information about a mixer control where each step in the control's + value changes the dB value by a constant dB amount. + The first parameter is the name of the variable to be defined. + The second parameter is the minimum value, in units of 0.01 dB. + The third parameter is the step size, in units of 0.01 dB. + Set the fourth parameter to 1 if the minimum value actually mutes + the control. + </para> + + <para> + The <function>DECLARE_TLV_DB_LINEAR</function> macro defines + information about a mixer control where the control's value affects + the output linearly. + The first parameter is the name of the variable to be defined. + The second parameter is the minimum value, in units of 0.01 dB. + The third parameter is the maximum value, in units of 0.01 dB. + If the minimum value mutes the control, set the second parameter to + <constant>TLV_DB_GAIN_MUTE</constant>. + </para> + </section> + </chapter> @@ -3880,7 +3965,7 @@ struct _snd_pcm_runtime { { struct mychip *chip = ac97->private_data; .... - // read a register value here from the codec + /* read a register value here from the codec */ return the_register_value; } @@ -3889,7 +3974,7 @@ struct _snd_pcm_runtime { { struct mychip *chip = ac97->private_data; .... - // write the given register value to the codec + /* write the given register value to the codec */ } static int snd_mychip_ac97(struct mychip *chip) @@ -3902,7 +3987,8 @@ struct _snd_pcm_runtime { .read = snd_mychip_ac97_read, }; - if ((err = snd_ac97_bus(chip->card, 0, &ops, NULL, &bus)) < 0) + err = snd_ac97_bus(chip->card, 0, &ops, NULL, &bus); + if (err < 0) return err; memset(&ac97, 0, sizeof(ac97)); ac97.private_data = chip; @@ -4447,10 +4533,10 @@ struct _snd_pcm_runtime { <informalexample> <programlisting> <![CDATA[ - struct list_head *list; struct snd_rawmidi_substream *substream; - list_for_each(list, &rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams) { - substream = list_entry(list, struct snd_rawmidi_substream, list); + list_for_each_entry(substream, + &rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams, + list { sprintf(substream->name, "My MIDI Port %d", substream->number + 1); } /* same for SNDRV_RAWMIDI_STREAM_INPUT */ diff --git a/Documentation/sound/alsa/OSS-Emulation.txt b/Documentation/sound/alsa/OSS-Emulation.txt index bfa0c9aacb4b..022aaeb0e9dd 100644 --- a/Documentation/sound/alsa/OSS-Emulation.txt +++ b/Documentation/sound/alsa/OSS-Emulation.txt @@ -303,10 +303,3 @@ ICE1712 supports only the unconventional format, interleaved the buffer as the conventional (mono or 2-channels, 8 or 16bit) format on OSS. -USB devices ------------ -Some USB devices support only 24bit format packed in 3bytes. This -format is not supported by OSS and no conversion is provided by kernel -OSS emulation. You can use the user-space OSS emulation via libaoss -instead. - diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt index 4eaae2a45534..8e1b02526698 100644 --- a/Documentation/sound/alsa/hda_codec.txt +++ b/Documentation/sound/alsa/hda_codec.txt @@ -49,6 +49,9 @@ struct hda_bus_ops { unsigned int verb, unsigned int parm); unsigned int (*get_response)(struct hda_codec *codec); void (*private_free)(struct hda_bus *); +#ifdef CONFIG_SND_HDA_POWER_SAVE + void (*pm_notify)(struct hda_codec *codec); +#endif }; The command callback is called when the codec module needs to send a @@ -56,9 +59,16 @@ VERB to the controller. It's always a single command. The get_response callback is called when the codec requires the answer for the last command. These two callbacks are mandatory and have to be given. -The last, private_free callback, is optional. It's called in the +The third, private_free callback, is optional. It's called in the destructor to release any necessary data in the lowlevel driver. +The pm_notify callback is available only with +CONFIG_SND_HDA_POWER_SAVE kconfig. It's called when the codec needs +to power up or may power down. The controller should check the all +belonging codecs on the bus whether they are actually powered off +(check codec->power_on), and optionally the driver may power down the +contoller side, too. + The bus instance is created via snd_hda_bus_new(). You need to pass the card instance, the template, and the pointer to store the resultant bus instance. @@ -86,10 +96,8 @@ resultant codec instance (can be NULL if not needed). The codec is stored in a linked list of bus instance. You can follow the codec list like: - struct list_head *p; struct hda_codec *codec; - list_for_each(p, &bus->codec_list) { - codec = list_entry(p, struct hda_codec, list); + list_for_each_entry(codec, &bus->codec_list, list) { ... } @@ -100,10 +108,15 @@ initialization sequence is called when the controls are built later. Codec Access ============ -To access codec, use snd_codec_read() and snd_codec_write(). +To access codec, use snd_hda_codec_read() and snd_hda_codec_write(). snd_hda_param_read() is for reading parameters. For writing a sequence of verbs, use snd_hda_sequence_write(). +There are variants of cached read/write, snd_hda_codec_write_cache(), +snd_hda_sequence_write_cache(). These are used for recording the +register states for the power-mangement resume. When no PM is needed, +these are equivalent with non-cached version. + To retrieve the number of sub nodes connected to the given node, use snd_hda_get_sub_nodes(). The connection list can be obtained via snd_hda_get_connections() call. @@ -239,6 +252,10 @@ set the codec->patch_ops field. This is defined as below: int (*suspend)(struct hda_codec *codec, pm_message_t state); int (*resume)(struct hda_codec *codec); #endif + #ifdef CONFIG_SND_HDA_POWER_SAVE + int (*check_power_status)(struct hda_codec *codec, + hda_nid_t nid); + #endif }; The build_controls callback is called from snd_hda_build_controls(). @@ -251,6 +268,18 @@ The unsol_event callback is called when an unsolicited event is received. The suspend and resume callbacks are for power management. +They can be NULL if no special sequence is required. When the resume +callback is NULL, the driver calls the init callback and resumes the +registers from the cache. If other handling is needed, you'd need to +write your own resume callback. There, the amp values can be resumed +via + void snd_hda_codec_resume_amp(struct hda_codec *codec); +and the other codec registers via + void snd_hda_codec_resume_cache(struct hda_codec *codec); + +The check_power_status callback is called when the amp value of the +given widget NID is changed. The codec code can turn on/off the power +appropriately from this information. Each entry can be NULL if not necessary to be called. @@ -267,8 +296,7 @@ Digital I/O =========== Call snd_hda_create_spdif_out_ctls() from the patch to create controls -related with SPDIF out. In the patch resume callback, call -snd_hda_resume_spdif(). +related with SPDIF out. Helper Functions @@ -284,12 +312,7 @@ as a module parameter, and PCI subsystem IDs. If the matching entry is found, it returns the config field value. snd_hda_add_new_ctls() can be used to create and add control entries. -Pass the zero-terminated array of struct snd_kcontrol_new. The same array -can be passed to snd_hda_resume_ctls() for resume. -Note that this will call control->put callback of these entries. So, -put callback should check codec->in_resume and force to restore the -given value if it's non-zero even if the value is identical with the -cached value. +Pass the zero-terminated array of struct snd_kcontrol_new Macros HDA_CODEC_VOLUME(), HDA_CODEC_MUTE() and their variables can be used for the entry of struct snd_kcontrol_new. diff --git a/Documentation/sound/alsa/powersave.txt b/Documentation/sound/alsa/powersave.txt new file mode 100644 index 000000000000..9657e8099228 --- /dev/null +++ b/Documentation/sound/alsa/powersave.txt @@ -0,0 +1,41 @@ +Notes on Power-Saving Mode +========================== + +AC97 and HD-audio drivers have the automatic power-saving mode. +This feature is enabled via Kconfig CONFIG_SND_AC97_POWER_SAVE +and CONFIG_SND_HDA_POWER_SAVE options, respectively. + +With the automatic power-saving, the driver turns off the codec power +appropriately when no operation is required. When no applications use +the device and/or no analog loopback is set, the power disablement is +done fully or partially. It'll save a certain power consumption, thus +good for laptops (even for desktops). + +The time-out for automatic power-off can be specified via power_save +module option of snd-ac97-codec and snd-hda-intel modules. Specify +the time-out value in seconds. 0 means to disable the automatic +power-saving. The default value of timeout is given via +CONFIG_SND_AC97_POWER_SAVE_DEFAULT and +CONFIG_SND_HDA_POWER_SAVE_DEFAULT Kconfig options. Setting this to 1 +(the minimum value) isn't recommended because many applications try to +reopen the device frequently. 10 would be a good choice for normal +operations. + +The power_save option is exported as writable. This means you can +adjust the value via sysfs on the fly. For example, to turn on the +automatic power-save mode with 10 seconds, write to +/sys/modules/snd_ac97_codec/parameters/power_save (usually as root): + + # echo 10 > /sys/modules/snd_ac97_codec/parameters/power_save + + +Note that you might hear click noise/pop when changing the power +state. Also, it often takes certain time to wake up from the +power-down to the active state. These are often hardly to fix, so +don't report extra bug reports unless you have a fix patch ;-) + +For HD-audio interface, there is another module option, +power_save_controller. This enables/disables the power-save mode of +the controller side. Setting this on may reduce a bit more power +consumption, but might result in longer wake-up time and click noise. +Try to turn it off when you experience such a thing too often. diff --git a/Documentation/sparc/sbus_drivers.txt b/Documentation/sparc/sbus_drivers.txt index 8418d35484fc..eb1e28ad8822 100644 --- a/Documentation/sparc/sbus_drivers.txt +++ b/Documentation/sparc/sbus_drivers.txt @@ -67,10 +67,12 @@ probe in an SBUS driver under Linux: MODULE_DEVICE_TABLE(of, mydevice_match); static struct of_platform_driver mydevice_driver = { - .name = "mydevice", .match_table = mydevice_match, .probe = mydevice_probe, .remove = __devexit_p(mydevice_remove), + .driver = { + .name = "mydevice", + }, }; static int __init mydevice_init(void) diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 76ea6c837be5..8861e47e5a2d 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -156,21 +156,29 @@ using the driver model to connect controller and protocol drivers using device tables provided by board specific initialization code. SPI shows up in sysfs in several locations: + /sys/devices/.../CTLR ... physical node for a given SPI controller + /sys/devices/.../CTLR/spiB.C ... spi_device on bus "B", chipselect C, accessed through CTLR. + /sys/bus/spi/devices/spiB.C ... symlink to that physical + .../CTLR/spiB.C device + /sys/devices/.../CTLR/spiB.C/modalias ... identifies the driver that should be used with this device (for hotplug/coldplug) - /sys/bus/spi/devices/spiB.C ... symlink to the physical - spiB.C device - /sys/bus/spi/drivers/D ... driver for one or more spi*.* devices - /sys/class/spi_master/spiB ... class device for the controller - managing bus "B". All the spiB.* devices share the same + /sys/class/spi_master/spiB ... symlink (or actual device node) to + a logical node which could hold class related state for the + controller managing bus "B". All spiB.* devices share one physical SPI bus segment, with SCLK, MOSI, and MISO. +Note that the actual location of the controller's class state depends +on whether you enabled CONFIG_SYSFS_DEPRECATED or not. At this time, +the only class-specific state is the bus number ("B" in "spiB"), so +those /sys/class entries are only useful to quickly identify busses. + How does board-specific init code declare SPI devices? ------------------------------------------------------ @@ -337,7 +345,8 @@ SPI protocol drivers somewhat resemble platform device drivers: The driver core will autmatically attempt to bind this driver to any SPI device whose board_info gave a modalias of "CHIP". Your probe() code -might look like this unless you're creating a class_device: +might look like this unless you're creating a device which is managing +a bus (appearing under /sys/class/spi_master). static int __devinit CHIP_probe(struct spi_device *spi) { @@ -442,7 +451,7 @@ An SPI controller will probably be registered on the platform_bus; write a driver to bind to the device, whichever bus is involved. The main task of this type of driver is to provide an "spi_master". -Use spi_alloc_master() to allocate the master, and class_get_devdata() +Use spi_alloc_master() to allocate the master, and spi_master_get_devdata() to get the driver-private data allocated for that device. struct spi_master *master; @@ -452,7 +461,7 @@ to get the driver-private data allocated for that device. if (!master) return -ENODEV; - c = class_get_devdata(&master->cdev); + c = spi_master_get_devdata(master); The driver will initialize the fields of that spi_master, including the bus number (maybe the same as the platform device ID) and three methods diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index 218e86215297..cf0e3ce0d526 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -29,7 +29,7 @@ static void pabort(const char *s) abort(); } -static char *device = "/dev/spidev1.1"; +static const char *device = "/dev/spidev1.1"; static uint8_t mode; static uint8_t bits = 8; static uint32_t speed = 500000; @@ -69,7 +69,7 @@ static void transfer(int fd) puts(""); } -void print_usage(char *prog) +void print_usage(const char *prog) { printf("Usage: %s [-DsbdlHOLC3]\n", prog); puts(" -D --device device to use (default /dev/spidev1.1)\n" @@ -88,7 +88,7 @@ void print_usage(char *prog) void parse_opts(int argc, char *argv[]) { while (1) { - static struct option lopts[] = { + static const struct option lopts[] = { { "device", 1, 0, 'D' }, { "speed", 1, 0, 's' }, { "delay", 1, 0, 'd' }, diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt new file mode 100644 index 000000000000..2af400609498 --- /dev/null +++ b/Documentation/usb/authorization.txt @@ -0,0 +1,92 @@ + +Authorizing (or not) your USB devices to connect to the system + +(C) 2007 Inaky Perez-Gonzalez <inaky@linux.intel.com> Intel Corporation + +This feature allows you to control if a USB device can be used (or +not) in a system. This feature will allow you to implement a lock-down +of USB devices, fully controlled by user space. + +As of now, when a USB device is connected it is configured and +it's interfaces inmediately made available to the users. With this +modification, only if root authorizes the device to be configured will +then it be possible to use it. + +Usage: + +Authorize a device to connect: + +$ echo 1 > /sys/usb/devices/DEVICE/authorized + +Deauthorize a device: + +$ echo 0 > /sys/usb/devices/DEVICE/authorized + +Set new devices connected to hostX to be deauthorized by default (ie: +lock down): + +$ echo 0 > /sys/bus/devices/usbX/authorized_default + +Remove the lock down: + +$ echo 1 > /sys/bus/devices/usbX/authorized_default + +By default, Wired USB devices are authorized by default to +connect. Wireless USB hosts deauthorize by default all new connected +devices (this is so because we need to do an authentication phase +before authorizing). + + +Example system lockdown (lame) +----------------------- + +Imagine you want to implement a lockdown so only devices of type XYZ +can be connected (for example, it is a kiosk machine with a visible +USB port): + +boot up +rc.local -> + + for host in /sys/bus/devices/usb* + do + echo 0 > $host/authorized_default + done + +Hookup an script to udev, for new USB devices + + if device_is_my_type $DEV + then + echo 1 > $device_path/authorized + done + + +Now, device_is_my_type() is where the juice for a lockdown is. Just +checking if the class, type and protocol match something is the worse +security verification you can make (or the best, for someone willing +to break it). If you need something secure, use crypto and Certificate +Authentication or stuff like that. Something simple for an storage key +could be: + +function device_is_my_type() +{ + echo 1 > authorized # temporarily authorize it + # FIXME: make sure none can mount it + mount DEVICENODE /mntpoint + sum=$(md5sum /mntpoint/.signature) + if [ $sum = $(cat /etc/lockdown/keysum) ] + then + echo "We are good, connected" + umount /mntpoint + # Other stuff so others can use it + else + echo 0 > authorized + fi +} + + +Of course, this is lame, you'd want to do a real certificate +verification stuff with PKI, so you don't depend on a shared secret, +etc, but you get the idea. Anybody with access to a device gadget kit +can fake descriptors and device info. Don't trust that. You are +welcome. + diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt new file mode 100644 index 000000000000..97842deec471 --- /dev/null +++ b/Documentation/usb/power-management.txt @@ -0,0 +1,517 @@ + Power Management for USB + + Alan Stern <stern@rowland.harvard.edu> + + October 5, 2007 + + + + What is Power Management? + ------------------------- + +Power Management (PM) is the practice of saving energy by suspending +parts of a computer system when they aren't being used. While a +component is "suspended" it is in a nonfunctional low-power state; it +might even be turned off completely. A suspended component can be +"resumed" (returned to a functional full-power state) when the kernel +needs to use it. (There also are forms of PM in which components are +placed in a less functional but still usable state instead of being +suspended; an example would be reducing the CPU's clock rate. This +document will not discuss those other forms.) + +When the parts being suspended include the CPU and most of the rest of +the system, we speak of it as a "system suspend". When a particular +device is turned off while the system as a whole remains running, we +call it a "dynamic suspend" (also known as a "runtime suspend" or +"selective suspend"). This document concentrates mostly on how +dynamic PM is implemented in the USB subsystem, although system PM is +covered to some extent (see Documentation/power/*.txt for more +information about system PM). + +Note: Dynamic PM support for USB is present only if the kernel was +built with CONFIG_USB_SUSPEND enabled. System PM support is present +only if the kernel was built with CONFIG_SUSPEND or CONFIG_HIBERNATION +enabled. + + + What is Remote Wakeup? + ---------------------- + +When a device has been suspended, it generally doesn't resume until +the computer tells it to. Likewise, if the entire computer has been +suspended, it generally doesn't resume until the user tells it to, say +by pressing a power button or opening the cover. + +However some devices have the capability of resuming by themselves, or +asking the kernel to resume them, or even telling the entire computer +to resume. This capability goes by several names such as "Wake On +LAN"; we will refer to it generically as "remote wakeup". When a +device is enabled for remote wakeup and it is suspended, it may resume +itself (or send a request to be resumed) in response to some external +event. Examples include a suspended keyboard resuming when a key is +pressed, or a suspended USB hub resuming when a device is plugged in. + + + When is a USB device idle? + -------------------------- + +A device is idle whenever the kernel thinks it's not busy doing +anything important and thus is a candidate for being suspended. The +exact definition depends on the device's driver; drivers are allowed +to declare that a device isn't idle even when there's no actual +communication taking place. (For example, a hub isn't considered idle +unless all the devices plugged into that hub are already suspended.) +In addition, a device isn't considered idle so long as a program keeps +its usbfs file open, whether or not any I/O is going on. + +If a USB device has no driver, its usbfs file isn't open, and it isn't +being accessed through sysfs, then it definitely is idle. + + + Forms of dynamic PM + ------------------- + +Dynamic suspends can occur in two ways: manual and automatic. +"Manual" means that the user has told the kernel to suspend a device, +whereas "automatic" means that the kernel has decided all by itself to +suspend a device. Automatic suspend is called "autosuspend" for +short. In general, a device won't be autosuspended unless it has been +idle for some minimum period of time, the so-called idle-delay time. + +Of course, nothing the kernel does on its own initiative should +prevent the computer or its devices from working properly. If a +device has been autosuspended and a program tries to use it, the +kernel will automatically resume the device (autoresume). For the +same reason, an autosuspended device will usually have remote wakeup +enabled, if the device supports remote wakeup. + +It is worth mentioning that many USB drivers don't support +autosuspend. In fact, at the time of this writing (Linux 2.6.23) the +only drivers which do support it are the hub driver, kaweth, asix, +usblp, usblcd, and usb-skeleton (which doesn't count). If a +non-supporting driver is bound to a device, the device won't be +autosuspended. In effect, the kernel pretends the device is never +idle. + +We can categorize power management events in two broad classes: +external and internal. External events are those triggered by some +agent outside the USB stack: system suspend/resume (triggered by +userspace), manual dynamic suspend/resume (also triggered by +userspace), and remote wakeup (triggered by the device). Internal +events are those triggered within the USB stack: autosuspend and +autoresume. + + + The user interface for dynamic PM + --------------------------------- + +The user interface for controlling dynamic PM is located in the power/ +subdirectory of each USB device's sysfs directory, that is, in +/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The +relevant attribute files are: wakeup, level, and autosuspend. + + power/wakeup + + This file is empty if the device does not support + remote wakeup. Otherwise the file contains either the + word "enabled" or the word "disabled", and you can + write those words to the file. The setting determines + whether or not remote wakeup will be enabled when the + device is next suspended. (If the setting is changed + while the device is suspended, the change won't take + effect until the following suspend.) + + power/level + + This file contains one of three words: "on", "auto", + or "suspend". You can write those words to the file + to change the device's setting. + + "on" means that the device should be resumed and + autosuspend is not allowed. (Of course, system + suspends are still allowed.) + + "auto" is the normal state in which the kernel is + allowed to autosuspend and autoresume the device. + + "suspend" means that the device should remain + suspended, and autoresume is not allowed. (But remote + wakeup may still be allowed, since it is controlled + separately by the power/wakeup attribute.) + + power/autosuspend + + This file contains an integer value, which is the + number of seconds the device should remain idle before + the kernel will autosuspend it (the idle-delay time). + The default is 2. 0 means to autosuspend as soon as + the device becomes idle, and -1 means never to + autosuspend. You can write a number to the file to + change the autosuspend idle-delay time. + +Writing "-1" to power/autosuspend and writing "on" to power/level do +essentially the same thing -- they both prevent the device from being +autosuspended. Yes, this is a redundancy in the API. + +(In 2.6.21 writing "0" to power/autosuspend would prevent the device +from being autosuspended; the behavior was changed in 2.6.22. The +power/autosuspend attribute did not exist prior to 2.6.21, and the +power/level attribute did not exist prior to 2.6.22.) + + + Changing the default idle-delay time + ------------------------------------ + +The default autosuspend idle-delay time is controlled by a module +parameter in usbcore. You can specify the value when usbcore is +loaded. For example, to set it to 5 seconds instead of 2 you would +do: + + modprobe usbcore autosuspend=5 + +Equivalently, you could add to /etc/modprobe.conf a line saying: + + options usbcore autosuspend=5 + +Some distributions load the usbcore module very early during the boot +process, by means of a program or script running from an initramfs +image. To alter the parameter value you would have to rebuild that +image. + +If usbcore is compiled into the kernel rather than built as a loadable +module, you can add + + usbcore.autosuspend=5 + +to the kernel's boot command line. + +Finally, the parameter value can be changed while the system is +running. If you do: + + echo 5 >/sys/module/usbcore/parameters/autosuspend + +then each new USB device will have its autosuspend idle-delay +initialized to 5. (The idle-delay values for already existing devices +will not be affected.) + +Setting the initial default idle-delay to -1 will prevent any +autosuspend of any USB device. This is a simple alternative to +disabling CONFIG_USB_SUSPEND and rebuilding the kernel, and it has the +added benefit of allowing you to enable autosuspend for selected +devices. + + + Warnings + -------- + +The USB specification states that all USB devices must support power +management. Nevertheless, the sad fact is that many devices do not +support it very well. You can suspend them all right, but when you +try to resume them they disconnect themselves from the USB bus or +they stop working entirely. This seems to be especially prevalent +among printers and scanners, but plenty of other types of device have +the same deficiency. + +For this reason, by default the kernel disables autosuspend (the +power/level attribute is initialized to "on") for all devices other +than hubs. Hubs, at least, appear to be reasonably well-behaved in +this regard. + +(In 2.6.21 and 2.6.22 this wasn't the case. Autosuspend was enabled +by default for almost all USB devices. A number of people experienced +problems as a result.) + +This means that non-hub devices won't be autosuspended unless the user +or a program explicitly enables it. As of this writing there aren't +any widespread programs which will do this; we hope that in the near +future device managers such as HAL will take on this added +responsibility. In the meantime you can always carry out the +necessary operations by hand or add them to a udev script. You can +also change the idle-delay time; 2 seconds is not the best choice for +every device. + +Sometimes it turns out that even when a device does work okay with +autosuspend there are still problems. For example, there are +experimental patches adding autosuspend support to the usbhid driver, +which manages keyboards and mice, among other things. Tests with a +number of keyboards showed that typing on a suspended keyboard, while +causing the keyboard to do a remote wakeup all right, would +nonetheless frequently result in lost keystrokes. Tests with mice +showed that some of them would issue a remote-wakeup request in +response to button presses but not to motion, and some in response to +neither. + +The kernel will not prevent you from enabling autosuspend on devices +that can't handle it. It is even possible in theory to damage a +device by suspending it at the wrong time -- for example, suspending a +USB hard disk might cause it to spin down without parking the heads. +(Highly unlikely, but possible.) Take care. + + + The driver interface for Power Management + ----------------------------------------- + +The requirements for a USB driver to support external power management +are pretty modest; the driver need only define + + .suspend + .resume + .reset_resume + +methods in its usb_driver structure, and the reset_resume method is +optional. The methods' jobs are quite simple: + + The suspend method is called to warn the driver that the + device is going to be suspended. If the driver returns a + negative error code, the suspend will be aborted. Normally + the driver will return 0, in which case it must cancel all + outstanding URBs (usb_kill_urb()) and not submit any more. + + The resume method is called to tell the driver that the + device has been resumed and the driver can return to normal + operation. URBs may once more be submitted. + + The reset_resume method is called to tell the driver that + the device has been resumed and it also has been reset. + The driver should redo any necessary device initialization, + since the device has probably lost most or all of its state + (although the interfaces will be in the same altsettings as + before the suspend). + +The reset_resume method is used by the USB Persist facility (see +Documentation/usb/persist.txt) and it can also be used under certain +circumstances when CONFIG_USB_PERSIST is not enabled. Currently, if a +device is reset during a resume and the driver does not have a +reset_resume method, the driver won't receive any notification about +the resume. Later kernels will call the driver's disconnect method; +2.6.23 doesn't do this. + +USB drivers are bound to interfaces, so their suspend and resume +methods get called when the interfaces are suspended or resumed. In +principle one might want to suspend some interfaces on a device (i.e., +force the drivers for those interface to stop all activity) without +suspending the other interfaces. The USB core doesn't allow this; all +interfaces are suspended when the device itself is suspended and all +interfaces are resumed when the device is resumed. It isn't possible +to suspend or resume some but not all of a device's interfaces. The +closest you can come is to unbind the interfaces' drivers. + + + The driver interface for autosuspend and autoresume + --------------------------------------------------- + +To support autosuspend and autoresume, a driver should implement all +three of the methods listed above. In addition, a driver indicates +that it supports autosuspend by setting the .supports_autosuspend flag +in its usb_driver structure. It is then responsible for informing the +USB core whenever one of its interfaces becomes busy or idle. The +driver does so by calling these three functions: + + int usb_autopm_get_interface(struct usb_interface *intf); + void usb_autopm_put_interface(struct usb_interface *intf); + int usb_autopm_set_interface(struct usb_interface *intf); + +The functions work by maintaining a counter in the usb_interface +structure. When intf->pm_usage_count is > 0 then the interface is +deemed to be busy, and the kernel will not autosuspend the interface's +device. When intf->pm_usage_count is <= 0 then the interface is +considered to be idle, and the kernel may autosuspend the device. + +(There is a similar pm_usage_count field in struct usb_device, +associated with the device itself rather than any of its interfaces. +This field is used only by the USB core.) + +The driver owns intf->pm_usage_count; it can modify the value however +and whenever it likes. A nice aspect of the usb_autopm_* routines is +that the changes they make are protected by the usb_device structure's +PM mutex (udev->pm_mutex); however drivers may change pm_usage_count +without holding the mutex. + + usb_autopm_get_interface() increments pm_usage_count and + attempts an autoresume if the new value is > 0 and the + device is suspended. + + usb_autopm_put_interface() decrements pm_usage_count and + attempts an autosuspend if the new value is <= 0 and the + device isn't suspended. + + usb_autopm_set_interface() leaves pm_usage_count alone. + It attempts an autoresume if the value is > 0 and the device + is suspended, and it attempts an autosuspend if the value is + <= 0 and the device isn't suspended. + +There also are a couple of utility routines drivers can use: + + usb_autopm_enable() sets pm_usage_cnt to 1 and then calls + usb_autopm_set_interface(), which will attempt an autoresume. + + usb_autopm_disable() sets pm_usage_cnt to 0 and then calls + usb_autopm_set_interface(), which will attempt an autosuspend. + +The conventional usage pattern is that a driver calls +usb_autopm_get_interface() in its open routine and +usb_autopm_put_interface() in its close or release routine. But +other patterns are possible. + +The autosuspend attempts mentioned above will often fail for one +reason or another. For example, the power/level attribute might be +set to "on", or another interface in the same device might not be +idle. This is perfectly normal. If the reason for failure was that +the device hasn't been idle for long enough, a delayed workqueue +routine is automatically set up to carry out the operation when the +autosuspend idle-delay has expired. + +Autoresume attempts also can fail. This will happen if power/level is +set to "suspend" or if the device doesn't manage to resume properly. +Unlike autosuspend, there's no delay for an autoresume. + + + Other parts of the driver interface + ----------------------------------- + +Sometimes a driver needs to make sure that remote wakeup is enabled +during autosuspend. For example, there's not much point +autosuspending a keyboard if the user can't cause the keyboard to do a +remote wakeup by typing on it. If the driver sets +intf->needs_remote_wakeup to 1, the kernel won't autosuspend the +device if remote wakeup isn't available or has been disabled through +the power/wakeup attribute. (If the device is already autosuspended, +though, setting this flag won't cause the kernel to autoresume it. +Normally a driver would set this flag in its probe method, at which +time the device is guaranteed not to be autosuspended.) + +The usb_autopm_* routines have to run in a sleepable process context; +they must not be called from an interrupt handler or while holding a +spinlock. In fact, the entire autosuspend mechanism is not well geared +toward interrupt-driven operation. However there is one thing a +driver can do in an interrupt handler: + + usb_mark_last_busy(struct usb_device *udev); + +This sets udev->last_busy to the current time. udev->last_busy is the +field used for idle-delay calculations; updating it will cause any +pending autosuspend to be moved back. The usb_autopm_* routines will +also set the last_busy field to the current time. + +Calling urb_mark_last_busy() from within an URB completion handler is +subject to races: The kernel may have just finished deciding the +device has been idle for long enough but not yet gotten around to +calling the driver's suspend method. The driver would have to be +responsible for synchronizing its suspend method with its URB +completion handler and causing the autosuspend to fail with -EBUSY if +an URB had completed too recently. + +External suspend calls should never be allowed to fail in this way, +only autosuspend calls. The driver can tell them apart by checking +udev->auto_pm; this flag will be set to 1 for internal PM events +(autosuspend or autoresume) and 0 for external PM events. + +Many of the ingredients in the autosuspend framework are oriented +towards interfaces: The usb_interface structure contains the +pm_usage_cnt field, and the usb_autopm_* routines take an interface +pointer as their argument. But somewhat confusingly, a few of the +pieces (usb_mark_last_busy() and udev->auto_pm) use the usb_device +structure instead. Drivers need to keep this straight; they can call +interface_to_usbdev() to find the device structure for a given +interface. + + + Locking requirements + -------------------- + +All three suspend/resume methods are always called while holding the +usb_device's PM mutex. For external events -- but not necessarily for +autosuspend or autoresume -- the device semaphore (udev->dev.sem) will +also be held. This implies that external suspend/resume events are +mutually exclusive with calls to probe, disconnect, pre_reset, and +post_reset; the USB core guarantees that this is true of internal +suspend/resume events as well. + +If a driver wants to block all suspend/resume calls during some +critical section, it can simply acquire udev->pm_mutex. +Alternatively, if the critical section might call some of the +usb_autopm_* routines, the driver can avoid deadlock by doing: + + down(&udev->dev.sem); + rc = usb_autopm_get_interface(intf); + +and at the end of the critical section: + + if (!rc) + usb_autopm_put_interface(intf); + up(&udev->dev.sem); + +Holding the device semaphore will block all external PM calls, and the +usb_autopm_get_interface() will prevent any internal PM calls, even if +it fails. (Exercise: Why?) + +The rules for locking order are: + + Never acquire any device semaphore while holding any PM mutex. + + Never acquire udev->pm_mutex while holding the PM mutex for + a device that isn't a descendant of udev. + +In other words, PM mutexes should only be acquired going up the device +tree, and they should be acquired only after locking all the device +semaphores you need to hold. These rules don't matter to drivers very +much; they usually affect just the USB core. + +Still, drivers do need to be careful. For example, many drivers use a +private mutex to synchronize their normal I/O activities with their +disconnect method. Now if the driver supports autosuspend then it +must call usb_autopm_put_interface() from somewhere -- maybe from its +close method. It should make the call while holding the private mutex, +since a driver shouldn't call any of the usb_autopm_* functions for an +interface from which it has been unbound. + +But the usb_autpm_* routines always acquire the device's PM mutex, and +consequently the locking order has to be: private mutex first, PM +mutex second. Since the suspend method is always called with the PM +mutex held, it mustn't try to acquire the private mutex. It has to +synchronize with the driver's I/O activities in some other way. + + + Interaction between dynamic PM and system PM + -------------------------------------------- + +Dynamic power management and system power management can interact in +a couple of ways. + +Firstly, a device may already be manually suspended or autosuspended +when a system suspend occurs. Since system suspends are supposed to +be as transparent as possible, the device should remain suspended +following the system resume. The 2.6.23 kernel obeys this principle +for manually suspended devices but not for autosuspended devices; they +do get resumed when the system wakes up. (Presumably they will be +autosuspended again after their idle-delay time expires.) In later +kernels this behavior will be fixed. + +(There is an exception. If a device would undergo a reset-resume +instead of a normal resume, and the device is enabled for remote +wakeup, then the reset-resume takes place even if the device was +already suspended when the system suspend began. The justification is +that a reset-resume is a kind of remote-wakeup event. Or to put it +another way, a device which needs a reset won't be able to generate +normal remote-wakeup signals, so it ought to be resumed immediately.) + +Secondly, a dynamic power-management event may occur as a system +suspend is underway. The window for this is short, since system +suspends don't take long (a few seconds usually), but it can happen. +For example, a suspended device may send a remote-wakeup signal while +the system is suspending. The remote wakeup may succeed, which would +cause the system suspend to abort. If the remote wakeup doesn't +succeed, it may still remain active and thus cause the system to +resume as soon as the system suspend is complete. Or the remote +wakeup may fail and get lost. Which outcome occurs depends on timing +and on the hardware and firmware design. + +More interestingly, a device might undergo a manual resume or +autoresume during system suspend. With current kernels this shouldn't +happen, because manual resumes must be initiated by userspace and +autoresumes happen in response to I/O requests, but all user processes +and I/O should be quiescent during a system suspend -- thanks to the +freezer. However there are plans to do away with the freezer, which +would mean these things would become possible. If and when this comes +about, the USB core will carefully arrange matters so that either type +of resume will block until the entire system has resumed. diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt index 5b635ae84944..4e0b62b8566f 100644 --- a/Documentation/usb/usb-serial.txt +++ b/Documentation/usb/usb-serial.txt @@ -428,6 +428,17 @@ Options supported: See http://www.uuhaus.de/linux/palmconnect.html for up-to-date information on this driver. +Winchiphead CH341 Driver + + This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip + also implements an IEEE 1284 parallel port, I2C and SPI, but that is not + supported by the driver. The protocol was analyzed from the behaviour + of the Windows driver, no datasheet is available at present. + The manufacturer's website: http://www.winchiphead.com/. + For any questions or problems with this driver, please contact + frank@kingswood-consulting.co.uk. + + Generic Serial driver If your device is not one of the above listed devices, compatible with diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index 53ae866ae37b..2917ce4ffdc4 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -34,9 +34,12 @@ if usbmon is built into the kernel. Verify that bus sockets are present. # ls /sys/kernel/debug/usbmon -1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u +0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u # +Now you can choose to either use the sockets numbered '0' (to capture packets on +all buses), and skip to step #3, or find the bus used by your device with step #2. + 2. Find which bus connects to the desired device Run "cat /proc/bus/usb/devices", and find the T-line which corresponds to @@ -56,6 +59,10 @@ Bus=03 means it's bus 3. # cat /sys/kernel/debug/usbmon/3u > /tmp/1.mon.out +to listen on a single bus, otherwise, to listen on all buses, type: + +# cat /sys/kernel/debug/usbmon/0u > /tmp/1.mon.out + This process will be reading until killed. Naturally, the output can be redirected to a desirable location. This is preferred, because it is going to be quite long. diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index 8242f52d0f22..dd4986497996 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -302,31 +302,30 @@ MEMORY POLICIES AND CPUSETS Memory policies work within cpusets as described above. For memory policies that require a node or set of nodes, the nodes are restricted to the set of -nodes whose memories are allowed by the cpuset constraints. If the -intersection of the set of nodes specified for the policy and the set of nodes -allowed by the cpuset is the empty set, the policy is considered invalid and -cannot be installed. +nodes whose memories are allowed by the cpuset constraints. If the nodemask +specified for the policy contains nodes that are not allowed by the cpuset, or +the intersection of the set of nodes specified for the policy and the set of +nodes with memory is the empty set, the policy is considered invalid +and cannot be installed. The interaction of memory policies and cpusets can be problematic for a couple of reasons: -1) the memory policy APIs take physical node id's as arguments. However, the - memory policy APIs do not provide a way to determine what nodes are valid - in the context where the application is running. An application MAY consult - the cpuset file system [directly or via an out of tree, and not generally - available, libcpuset API] to obtain this information, but then the - application must be aware that it is running in a cpuset and use what are - intended primarily as administrative APIs. - - However, as long as the policy specifies at least one node that is valid - in the controlling cpuset, the policy can be used. +1) the memory policy APIs take physical node id's as arguments. As mentioned + above, it is illegal to specify nodes that are not allowed in the cpuset. + The application must query the allowed nodes using the get_mempolicy() + API with the MPOL_F_MEMS_ALLOWED flag to determine the allowed nodes and + restrict itself to those nodes. However, the resources available to a + cpuset can be changed by the system administrator, or a workload manager + application, at any time. So, a task may still get errors attempting to + specify policy nodes, and must query the allowed memories again. 2) when tasks in two cpusets share access to a memory region, such as shared memory segments created by shmget() of mmap() with the MAP_ANONYMOUS and MAP_SHARED flags, and any of the tasks install shared policy on the region, only nodes whose memories are allowed in both cpusets may be used in the - policies. Again, obtaining this information requires "stepping outside" - the memory policy APIs, as well as knowing in what cpusets other task might - be attaching to the shared region, to use the cpuset information. + policies. Obtaining this information requires "stepping outside" the + memory policy APIs to use the cpuset information and requires that one + know in what cpusets other task might be attaching to the shared region. Furthermore, if the cpusets' allowed memory sets are disjoint, "local" allocation is the only valid policy. diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt index f42798ed1c54..b89b6d2bebfa 100644 --- a/Documentation/x86_64/mm.txt +++ b/Documentation/x86_64/mm.txt @@ -9,6 +9,7 @@ ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole ffff810000000000 - ffffc0ffffffffff (=46 bits) direct mapping of all phys. memory ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space +ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) ... unused hole ... ffffffff80000000 - ffffffff82800000 (=40 MB) kernel text mapping, from phys 0 ... unused hole ... |