aboutsummaryrefslogtreecommitdiff
path: root/Documentation/fb/tridentfb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/fb/tridentfb.txt')
-rw-r--r--Documentation/fb/tridentfb.txt54
1 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/fb/tridentfb.txt b/Documentation/fb/tridentfb.txt
new file mode 100644
index 000000000000..8a6c8a43e6a3
--- /dev/null
+++ b/Documentation/fb/tridentfb.txt
@@ -0,0 +1,54 @@
+Tridentfb is a framebuffer driver for some Trident chip based cards.
+
+The following list of chips is thought to be supported although not all are
+tested:
+
+those from the Image series with Cyber in their names - accelerated
+those with Blade in their names (Blade3D,CyberBlade...) - accelerated
+the newer CyberBladeXP family - nonaccelerated
+
+Only PCI/AGP based cards are supported, none of the older Tridents.
+
+How to use it?
+==============
+
+When booting you can pass the video parameter.
+video=tridentfb
+
+The parameters for tridentfb are concatenated with a ':' as in this example.
+
+video=tridentfb:800x600,bpp=16,noaccel
+
+The second level parameters that tridentfb understands are:
+
+noaccel - turns off acceleration (when it doesn't work for your card)
+accel - force text acceleration (for boards which by default are noacceled)
+
+fp - use flat panel related stuff
+crt - assume monitor is present instead of fp
+
+center - for flat panels and resolutions smaller than native size center the
+ image, otherwise use
+stretch
+
+memsize - integer value in Kb, use if your card's memory size is misdetected.
+ look at the driver output to see what it says when initializing.
+memdiff - integer value in Kb,should be nonzero if your card reports
+ more memory than it actually has.For instance mine is 192K less than
+ detection says in all three BIOS selectable situations 2M, 4M, 8M.
+ Only use if your video memory is taken from main memory hence of
+ configurable size.Otherwise use memsize.
+ If in some modes which barely fit the memory you see garbage at the bottom
+ this might help by not letting change to that mode anymore.
+
+nativex - the width in pixels of the flat panel.If you know it (usually 1024
+ 800 or 1280) and it is not what the driver seems to detect use it.
+
+bpp - bits per pixel (8,16 or 32)
+mode - a mode name like 800x600 (as described in Documentation/fb/modedb.txt)
+
+Using insane values for the above parameters will probably result in driver
+misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or
+nativex=93)
+
+Contact: jani@astechnix.ro