aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/wm8994.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/wm8994.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/wm8994.txt58
1 files changed, 57 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index 7a7eb1e7bda6..f2f3e80934d2 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -5,14 +5,70 @@ on the board).
Required properties:
- - compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958"
+ - compatible : One of "wlf,wm1811", "wlf,wm8994" or "wlf,wm8958".
- reg : the I2C address of the device for I2C, the chip select
number for SPI.
+ - gpio-controller : Indicates this device is a GPIO controller.
+ - #gpio-cells : Must be 2. The first cell is the pin number and the
+ second cell is used to specify optional parameters (currently unused).
+
+ - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
+ SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
+ in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+
+ - interrupts : The interrupt line the IRQ signal for the device is
+ connected to. This is optional, if it is not connected then none
+ of the interrupt related properties should be specified.
+ - interrupt-controller : These devices contain interrupt controllers
+ and may provide interrupt services to other devices if they have an
+ interrupt line connected.
+ - interrupt-parent : The parent interrupt controller.
+ - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupts.txt
+
+ - wlf,gpio-cfg : A list of GPIO configuration register values. If absent,
+ no configuration of these registers is performed. If any value is
+ over 0xffff then the register will be left as default. If present 11
+ values must be supplied.
+
+ - wlf,micbias-cfg : Two MICBIAS register values for WM1811 or
+ WM8958. If absent the register defaults will be used.
+
+ - wlf,ldo1ena : GPIO specifier for control of LDO1ENA input to device.
+ - wlf,ldo2ena : GPIO specifier for control of LDO2ENA input to device.
+
+ - wlf,lineout1-se : If present LINEOUT1 is in single ended mode.
+ - wlf,lineout2-se : If present LINEOUT2 is in single ended mode.
+
+ - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback
+ connected.
+ - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback
+ connected.
+
+ - wlf,ldoena-always-driven : If present LDOENA is always driven.
+
Example:
codec: wm8994@1a {
compatible = "wlf,wm8994";
reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ lineout1-se;
+
+ AVDD2-supply = <&regulator>;
+ CPVDD-supply = <&regulator>;
+ DBVDD1-supply = <&regulator>;
+ DBVDD2-supply = <&regulator>;
+ DBVDD3-supply = <&regulator>;
+ SPKVDD1-supply = <&regulator>;
+ SPKVDD2-supply = <&regulator>;
};