diff options
Diffstat (limited to 'Documentation/DocBook')
80 files changed, 1345 insertions, 700 deletions
diff --git a/Documentation/DocBook/debugobjects.tmpl b/Documentation/DocBook/debugobjects.tmpl index 08ff908aa7a2..24979f691e3e 100644 --- a/Documentation/DocBook/debugobjects.tmpl +++ b/Documentation/DocBook/debugobjects.tmpl @@ -96,6 +96,7 @@ <listitem><para>debug_object_deactivate</para></listitem> <listitem><para>debug_object_destroy</para></listitem> <listitem><para>debug_object_free</para></listitem> + <listitem><para>debug_object_assert_init</para></listitem> </itemizedlist> Each of these functions takes the address of the real object and a pointer to the object type specific debug description @@ -273,6 +274,26 @@ debug checks. </para> </sect1> + + <sect1 id="debug_object_assert_init"> + <title>debug_object_assert_init</title> + <para> + This function is called to assert that an object has been + initialized. + </para> + <para> + When the real object is not tracked by debugobjects, it calls + fixup_assert_init of the object type description structure + provided by the caller, with the hardcoded object state + ODEBUG_NOT_AVAILABLE. The fixup function can correct the problem + by calling debug_object_init and other specific initializing + functions. + </para> + <para> + When the real object is already tracked by debugobjects it is + ignored. + </para> + </sect1> </chapter> <chapter id="fixupfunctions"> <title>Fixup functions</title> @@ -381,6 +402,35 @@ statistics. </para> </sect1> + <sect1 id="fixup_assert_init"> + <title>fixup_assert_init</title> + <para> + This function is called from the debug code whenever a problem + in debug_object_assert_init is detected. + </para> + <para> + Called from debug_object_assert_init() with a hardcoded state + ODEBUG_STATE_NOTAVAILABLE when the object is not found in the + debug bucket. + </para> + <para> + The function returns 1 when the fixup was successful, + otherwise 0. The return value is used to update the + statistics. + </para> + <para> + Note, this function should make sure debug_object_init() is + called before returning. + </para> + <para> + The handling of statically initialized objects is a special + case. The fixup function should check if this is a legitimate + case of a statically initialized object or not. In this case only + debug_object_init() should be called to make the object known to + the tracker. Then the function should return 0 because this is not + a real fixup. + </para> + </sect1> </chapter> <chapter id="bugs"> <title>Known Bugs And Assumptions</title> diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c27915893974..196b8b9dba11 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -32,7 +32,7 @@ The Linux DRM layer contains code intended to support the needs of complex graphics devices, usually containing programmable pipelines well suited to 3D graphics acceleration. Graphics - drivers in the kernel can make use of DRM functions to make + drivers in the kernel may make use of DRM functions to make tasks like memory management, interrupt handling and DMA easier, and provide a uniform interface to applications. </para> @@ -57,10 +57,10 @@ existing drivers. </para> <para> - First, we'll go over some typical driver initialization + First, we go over some typical driver initialization requirements, like setting up command buffers, creating an initial output configuration, and initializing core services. - Subsequent sections will cover core internals in more detail, + Subsequent sections cover core internals in more detail, providing implementation notes and examples. </para> <para> @@ -74,7 +74,7 @@ </para> <para> The core of every DRM driver is struct drm_driver. Drivers - will typically statically initialize a drm_driver structure, + typically statically initialize a drm_driver structure, then pass it to drm_init() at load time. </para> @@ -88,8 +88,8 @@ </para> <programlisting> static struct drm_driver driver = { - /* don't use mtrr's here, the Xserver or user space app should - * deal with them for intel hardware. + /* Don't use MTRRs here; the Xserver or userspace app should + * deal with them for Intel hardware. */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | @@ -154,8 +154,8 @@ </programlisting> <para> In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports. - We'll go over the individual callbacks in later sections. Since + sets several flags indicating what core features it supports; + we go over the individual callbacks in later sections. Since flags indicate which features your driver supports to the DRM core, you need to set most of them prior to calling drm_init(). Some, like DRIVER_MODESET can be set later based on user supplied parameters, @@ -203,8 +203,8 @@ <term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term> <listitem> <para> - DRIVER_HAVE_IRQ indicates whether the driver has a IRQ - handler, DRIVER_IRQ_SHARED indicates whether the device & + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ + handler. DRIVER_IRQ_SHARED indicates whether the device & handler support shared IRQs (note that this is required of PCI drivers). </para> @@ -214,8 +214,8 @@ <term>DRIVER_DMA_QUEUE</term> <listitem> <para> - If the driver queues DMA requests and completes them - asynchronously, this flag should be set. Deprecated. + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. </para> </listitem> </varlistentry> @@ -238,7 +238,7 @@ </variablelist> <para> In this specific case, the driver requires AGP and supports - IRQs. DMA, as we'll see, is handled by device specific ioctls + IRQs. DMA, as discussed later, is handled by device-specific ioctls in this case. It also supports the kernel mode setting APIs, though unlike in the actual i915 driver source, this example unconditionally exports KMS capability. @@ -269,36 +269,34 @@ initial output configuration. </para> <para> - Note that the tasks performed at driver load time must not - conflict with DRM client requirements. For instance, if user + If compatibility is a concern (e.g. with drivers converted over + to the new interfaces from the old ones), care must be taken to + prevent device initialization and control that is incompatible with + currently active userspace drivers. For instance, if user level mode setting drivers are in use, it would be problematic to perform output discovery & configuration at load time. - Likewise, if pre-memory management aware user level drivers are + Likewise, if user-level drivers unaware of memory management are in use, memory management and command buffer setup may need to - be omitted. These requirements are driver specific, and care + be omitted. These requirements are driver-specific, and care needs to be taken to keep both old and new applications and libraries working. The i915 driver supports the "modeset" module parameter to control whether advanced features are - enabled at load time or in legacy fashion. If compatibility is - a concern (e.g. with drivers converted over to the new interfaces - from the old ones), care must be taken to prevent incompatible - device initialization and control with the currently active - userspace drivers. + enabled at load time or in legacy fashion. </para> <sect2> <title>Driver private & performance counters</title> <para> The driver private hangs off the main drm_device structure and - can be used for tracking various device specific bits of + can be used for tracking various device-specific bits of information, like register offsets, command buffer status, register state for suspend/resume, etc. At load time, a - driver can simply allocate one and set drm_device.dev_priv - appropriately; at unload the driver can free it and set - drm_device.dev_priv to NULL. + driver may simply allocate one and set drm_device.dev_priv + appropriately; it should be freed and drm_device.dev_priv set + to NULL when the driver is unloaded. </para> <para> - The DRM supports several counters which can be used for rough + The DRM supports several counters which may be used for rough performance characterization. Note that the DRM stat counter system is not often used by applications, and supporting additional counters is completely optional. @@ -307,15 +305,15 @@ These interfaces are deprecated and should not be used. If performance monitoring is desired, the developer should investigate and potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information to performance monitoring - tools and applications. + GPU related performance information for consumption by performance + monitoring tools and applications. </para> </sect2> <sect2> <title>Configuring the device</title> <para> - Obviously, device configuration will be device specific. + Obviously, device configuration is device-specific. However, there are several common operations: finding a device's PCI resources, mapping them, and potentially setting up an IRQ handler. @@ -323,10 +321,10 @@ <para> Finding & mapping resources is fairly straightforward. The DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len() can be used to find BARs on the given + drm_get_resource_len(), may be used to find BARs on the given drm_device struct. Once those values have been retrieved, the driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note you'll probably want a + mapping for the BAR in question. Note that you probably want a drm_local_map_t in your driver private structure to track any mappings you create. <!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* --> @@ -335,20 +333,20 @@ <para> if compatibility with other operating systems isn't a concern (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls can be used for the above, e.g. pci_resource_* + native Linux calls may be used for the above, e.g. pci_resource_* and iomap*/iounmap. See the Linux device driver book for more info. </para> <para> - Once you have a register map, you can use the DRM_READn() and + Once you have a register map, you may use the DRM_READn() and DRM_WRITEn() macros to access the registers on your device, or - use driver specific versions to offset into your MMIO space - relative to a driver specific base pointer (see I915_READ for - example). + use driver-specific versions to offset into your MMIO space + relative to a driver-specific base pointer (see I915_READ for + an example). </para> <para> If your device supports interrupt generation, you may want to - setup an interrupt handler at driver load time as well. This + set up an interrupt handler when the driver is loaded. This is done using the drm_irq_install() function. If your device supports vertical blank interrupts, it should call drm_vblank_init() to initialize the core vblank handling code before @@ -357,7 +355,7 @@ </para> <!--!Fdrivers/char/drm/drm_irq.c drm_irq_install--> <para> - Once your interrupt handler is registered (it'll use your + Once your interrupt handler is registered (it uses your drm_driver.irq_handler as the actual interrupt handling function), you can safely enable interrupts on your device, assuming any other state your interrupt handler uses is also @@ -371,10 +369,10 @@ using the pci_map_rom() call, a convenience function that takes care of mapping the actual ROM, whether it has been shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that once you've - mapped the ROM and extracted any necessary information, be - sure to unmap it; on many devices the ROM address decoder is - shared with other BARs, so leaving it mapped can cause + on the PCI device in the ROM BAR. Note that after the ROM + has been mapped and any necessary information has been extracted, + it should be unmapped; on many devices, the ROM address decoder is + shared with other BARs, so leaving it mapped could cause undesired behavior like hangs or memory corruption. <!--!Fdrivers/pci/rom.c pci_map_rom--> </para> @@ -389,9 +387,9 @@ should support a memory manager. </para> <para> - If your driver supports memory management (it should!), you'll + If your driver supports memory management (it should!), you need to set that up at load time as well. How you initialize - it depends on which memory manager you're using, TTM or GEM. + it depends on which memory manager you're using: TTM or GEM. </para> <sect3> <title>TTM initialization</title> @@ -401,7 +399,7 @@ and devices with dedicated video RAM (VRAM), i.e. most discrete graphics devices. If your device has dedicated RAM, supporting TTM is desirable. TTM also integrates tightly with your - driver specific buffer execution function. See the radeon + driver-specific buffer execution function. See the radeon driver for examples. </para> <para> @@ -429,21 +427,21 @@ created by the memory manager at runtime. Your global TTM should have a type of TTM_GLOBAL_TTM_MEM. The size field for the global object should be sizeof(struct ttm_mem_global), and the init and - release hooks should point at your driver specific init and - release routines, which will probably eventually call - ttm_mem_global_init and ttm_mem_global_release respectively. + release hooks should point at your driver-specific init and + release routines, which probably eventually call + ttm_mem_global_init and ttm_mem_global_release, respectively. </para> <para> Once your global TTM accounting structure is set up and initialized - (done by calling ttm_global_item_ref on the global object you - just created), you'll need to create a buffer object TTM to + by calling ttm_global_item_ref() on it, + you need to create a buffer object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, - driver specific init and release functions can be provided, - likely eventually calling ttm_bo_global_init and - ttm_bo_global_release, respectively. Also like the previous - object, ttm_global_item_ref is used to create an initial reference + driver-specific init and release functions may be provided, + likely eventually calling ttm_bo_global_init() and + ttm_bo_global_release(), respectively. Also, like the previous + object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. </para> </sect3> @@ -453,27 +451,26 @@ GEM is an alternative to TTM, designed specifically for UMA devices. It has simpler initialization and execution requirements than TTM, but has no VRAM management capability. Core GEM - initialization is comprised of a basic drm_mm_init call to create + is initialized by calling drm_mm_init() to create a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver will - need to allocate and initialize a command ring buffer following - basic GEM initialization. Most UMA devices have a so-called + object allocation. In a KMS configuration, the driver + needs to allocate and initialize a command ring buffer following + core GEM initialization. A UMA device usually has what is called a "stolen" memory region, which provides space for the initial framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and must + device. This space is not typically managed by GEM, and it must be initialized separately into its own DRM MM object. </para> <para> - Initialization will be driver specific, and will depend on - the architecture of the device. In the case of Intel + Initialization is driver-specific. In the case of Intel integrated graphics chips like 965GM, GEM initialization can be done by calling the internal GEM init function, i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM will manage + (i.e. it doesn't have dedicated VRAM), GEM manages making regular RAM available for GPU operations. Memory set aside by the BIOS (called "stolen" memory by the i915 - driver) will be managed by the DRM memrange allocator; the - rest of the aperture will be managed by GEM. + driver) is managed by the DRM memrange allocator; the + rest of the aperture is managed by GEM. <programlisting> /* Basic memrange allocator for stolen space (aka vram) */ drm_memrange_init(&dev_priv->vram, 0, prealloc_size); @@ -483,7 +480,7 @@ <!--!Edrivers/char/drm/drm_memrange.c--> </para> <para> - Once the memory manager has been set up, we can allocate the + Once the memory manager has been set up, we may allocate the command buffer. In the i915 case, this is also done with a GEM function, i915_gem_init_ringbuffer(). </para> @@ -493,16 +490,25 @@ <sect2> <title>Output configuration</title> <para> - The final initialization task is output configuration. This involves - finding and initializing the CRTCs, encoders and connectors - for your device, creating an initial configuration and - registering a framebuffer console driver. + The final initialization task is output configuration. This involves: + <itemizedlist> + <listitem> + Finding and initializing the CRTCs, encoders, and connectors + for the device. + </listitem> + <listitem> + Creating an initial configuration. + </listitem> + <listitem> + Registering a framebuffer console driver. + </listitem> + </itemizedlist> </para> <sect3> <title>Output discovery and initialization</title> <para> - Several core functions exist to create CRTCs, encoders and - connectors, namely drm_crtc_init(), drm_connector_init() and + Several core functions exist to create CRTCs, encoders, and + connectors, namely: drm_crtc_init(), drm_connector_init(), and drm_encoder_init(), along with several "helper" functions to perform common tasks. </para> @@ -555,10 +561,10 @@ void intel_crt_init(struct drm_device *dev) </programlisting> <para> In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device - specific i2c bus is also created, for fetching EDID data and + CRT connector and encoder combination is created. A device-specific + i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, - the new connector is registered with sysfs, to make its + the new connector is registered with sysfs to make its properties available to applications. </para> <sect4> @@ -567,12 +573,12 @@ void intel_crt_init(struct drm_device *dev) Since many PC-class graphics devices have similar display output designs, the DRM provides a set of helper functions to make output management easier. The core helper routines handle - encoder re-routing and disabling of unused functions following - mode set. Using the helpers is optional, but recommended for + encoder re-routing and the disabling of unused functions following + mode setting. Using the helpers is optional, but recommended for devices with PC-style architectures (i.e. a set of display planes for feeding pixels to encoders which are in turn routed to connectors). Devices with more complex requirements needing - finer grained management can opt to use the core callbacks + finer grained management may opt to use the core callbacks directly. </para> <para> @@ -580,17 +586,25 @@ void intel_crt_init(struct drm_device *dev) </para> </sect4> <para> - For each encoder, CRTC and connector, several functions must - be provided, depending on the object type. Encoder objects - need to provide a DPMS (basically on/off) function, mode fixup - (for converting requested modes into native hardware timings), - and prepare, set and commit functions for use by the core DRM - helper functions. Connector helpers need to provide mode fetch and - validity functions as well as an encoder matching function for - returning an ideal encoder for a given connector. The core - connector functions include a DPMS callback, (deprecated) - save/restore routines, detection, mode probing, property handling, - and cleanup functions. + Each encoder object needs to provide: + <itemizedlist> + <listitem> + A DPMS (basically on/off) function. + </listitem> + <listitem> + A mode-fixup function (for converting requested modes into + native hardware timings). + </listitem> + <listitem> + Functions (prepare, set, and commit) for use by the core DRM + helper functions. + </listitem> + </itemizedlist> + Connector helpers need to provide functions (mode-fetch, validity, + and encoder-matching) for returning an ideal encoder for a given + connector. The core connector functions include a DPMS callback, + save/restore routines (deprecated), detection, mode probing, + property handling, and cleanup functions. </para> <!--!Edrivers/char/drm/drm_crtc.h--> <!--!Edrivers/char/drm/drm_crtc.c--> @@ -605,23 +619,34 @@ void intel_crt_init(struct drm_device *dev) <title>VBlank event handling</title> <para> The DRM core exposes two vertical blank related ioctls: - DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL. + <variablelist> + <varlistentry> + <term>DRM_IOCTL_WAIT_VBLANK</term> + <listitem> + <para> + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term>DRM_IOCTL_MODESET_CTL</term> + <listitem> + <para> + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command, so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + </para> + </listitem> + </varlistentry> + </variablelist> <!--!Edrivers/char/drm/drm_irq.c--> </para> <para> - DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure - as its argument, and is used to block or request a signal when a - specified vblank event occurs. - </para> - <para> - DRM_IOCTL_MODESET_CTL should be called by application level - drivers before and after mode setting, since on many devices the - vertical blank counter will be reset at that time. Internally, - the DRM snapshots the last vblank count when the ioctl is called - with the _DRM_PRE_MODESET command so that the counter won't go - backwards (which is dealt with when _DRM_POST_MODESET is used). - </para> - <para> To support the functions above, the DRM core provides several helper functions for tracking vertical blank counters, and requires drivers to provide several callbacks: @@ -632,24 +657,24 @@ void intel_crt_init(struct drm_device *dev) register. The enable and disable vblank callbacks should enable and disable vertical blank interrupts, respectively. In the absence of DRM clients waiting on vblank events, the core DRM - code will use the disable_vblank() function to disable - interrupts, which saves power. They'll be re-enabled again when + code uses the disable_vblank() function to disable + interrupts, which saves power. They are re-enabled again when a client calls the vblank wait ioctl above. </para> <para> - Devices that don't provide a count register can simply use an + A device that doesn't provide a count register may simply use an internal atomic counter incremented on every vertical blank - interrupt, and can make their enable and disable vblank - functions into no-ops. + interrupt (and then treat the enable_vblank() and disable_vblank() + callbacks as no-ops). </para> </sect1> <sect1> <title>Memory management</title> <para> - The memory manager lies at the heart of many DRM operations, and - is also required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers, TTM + The memory manager lies at the heart of many DRM operations; it + is required to support advanced client features like OpenGL + pbuffers. The DRM currently contains two memory managers: TTM and GEM. </para> @@ -679,41 +704,46 @@ void intel_crt_init(struct drm_device *dev) <para> GEM-enabled drivers must provide gem_init_object() and gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver - specific ioctls to support command execution, pinning, buffer + allocation routines. They should also provide several driver-specific + ioctls to support command execution, pinning, buffer read & write, mapping, and domain ownership transfers. </para> <para> - On a fundamental level, GEM involves several operations: memory - allocation and freeing, command execution, and aperture management - at command execution time. Buffer object allocation is relatively + On a fundamental level, GEM involves several operations: + <itemizedlist> + <listitem>Memory allocation and freeing</listitem> + <listitem>Command execution</listitem> + <listitem>Aperture management at command execution time</listitem> + </itemizedlist> + Buffer object allocation is relatively straightforward and largely provided by Linux's shmem layer, which provides memory to back each object. When mapped into the GTT or used in a command buffer, the backing pages for an object are flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, when the GPU finishes rendering to an object, - if the CPU accesses it, it must be made coherent with the CPU's view + with the GPU. Likewise, if the CPU accesses an object after the GPU + has finished rendering to the object, then the object must be made + coherent with the CPU's view of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by the GEM - set domain function, which evaluates an object's current domain and + This core CPU<->GPU coherency management is provided by a + device-specific ioctl, which evaluates an object's current domain and performs any necessary flushing or synchronization to put the object into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case the set domain function - will block the client and wait for rendering to complete before + i.e. an active render target; in that case, setting the domain + blocks the client and waits for rendering to complete before performing any necessary flushing operations). </para> <para> Perhaps the most important GEM function is providing a command execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects - and submit them to GEM. At that point, GEM will take care to bind + buffers containing references to previously allocated memory objects, + and then submit them to GEM. At that point, GEM takes care to bind all the objects into the GTT, execute the buffer, and provide necessary synchronization between clients accessing the same buffers. This often involves evicting some objects from the GTT and re-binding others (a fairly expensive operation), and providing relocation support which hides fixed GTT offsets from clients. Clients must take care not to submit command buffers that reference more objects - than can fit in the GTT or GEM will reject them and no rendering + than can fit in the GTT; otherwise, GEM will reject them and no rendering will occur. Similarly, if several objects in the buffer require fence registers to be allocated for correct rendering (e.g. 2D blits on pre-965 chips), care must be taken not to require more fence @@ -729,7 +759,7 @@ void intel_crt_init(struct drm_device *dev) <title>Output management</title> <para> At the core of the DRM output management code is a set of - structures representing CRTCs, encoders and connectors. + structures representing CRTCs, encoders, and connectors. </para> <para> A CRTC is an abstraction representing a part of the chip that @@ -765,21 +795,19 @@ void intel_crt_init(struct drm_device *dev) <sect1> <title>Framebuffer management</title> <para> - In order to set a mode on a given CRTC, encoder and connector - configuration, clients need to provide a framebuffer object which - will provide a source of pixels for the CRTC to deliver to the encoder(s) - and ultimately the connector(s) in the configuration. A framebuffer - is fundamentally a driver specific memory object, made into an opaque - handle by the DRM addfb function. Once an fb has been created this - way it can be passed to the KMS mode setting routines for use in - a configuration. + Clients need to provide a framebuffer object which provides a source + of pixels for a CRTC to deliver to the encoder(s) and ultimately the + connector(s). A framebuffer is fundamentally a driver-specific memory + object, made into an opaque handle by the DRM's addfb() function. + Once a framebuffer has been created this way, it may be passed to the + KMS mode setting routines for use in a completed configuration. </para> </sect1> <sect1> <title>Command submission & fencing</title> <para> - This should cover a few device specific command submission + This should cover a few device-specific command submission implementations. </para> </sect1> @@ -789,7 +817,7 @@ void intel_crt_init(struct drm_device *dev) <para> The DRM core provides some suspend/resume code, but drivers wanting full suspend/resume support should provide save() and - restore() functions. These will be called at suspend, + restore() functions. These are called at suspend, hibernate, or resume time, and should perform any state save or restore required by your device across suspend or hibernate states. @@ -812,8 +840,8 @@ void intel_crt_init(struct drm_device *dev) <para> The DRM core exports several interfaces to applications, generally intended to be used through corresponding libdrm - wrapper functions. In addition, drivers export device specific - interfaces for use by userspace drivers & device aware + wrapper functions. In addition, drivers export device-specific + interfaces for use by userspace drivers & device-aware applications through ioctls and sysfs files. </para> <para> @@ -822,8 +850,8 @@ void intel_crt_init(struct drm_device *dev) management, memory management, and output management. </para> <para> - Cover generic ioctls and sysfs layout here. Only need high - level info, since man pages will cover the rest. + Cover generic ioctls and sysfs layout here. We only need high-level + info, since man pages should cover the rest. </para> </chapter> diff --git a/Documentation/DocBook/media/constraints.png.b64 b/Documentation/DocBook/media/constraints.png.b64 new file mode 100644 index 000000000000..125b4a94962c --- /dev/null +++ b/Documentation/DocBook/media/constraints.png.b64 @@ -0,0 +1,59 @@ +iVBORw0KGgoAAAANSUhEUgAAAlQAAAFYCAYAAACVsmLPAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A +/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBIAKVtZsMAAAAxxSURBVHja +7d3ZbqvIAkDRLsv//8v0QytXvpYZap7Wko56OAnE2AXbBSbhOI7jHwAAkr1sAgAAQQUAIKgAAAQV +AICgAgBAUAEACCoAAEEFACCoAAAQVAAAzb2jvyMEWw0AmFvh37xnhgoAQFABAPT1zvruwtNlAADV +VLxsyQwVAICgAgAQVAAAggoAQFABACCoYEohuFkugKACsmLq178DIKiAyJgSVQCCCigQU6IKQFAB +BWJKVAEIKqBgKIkqAEEFFAgkUQUgqIACYSSqAAQViKkwxjIAEFSwbUyJKgBBBWJq8GUCIKhgm5gS +VQCCCsSUqAIQVMBYoSOqAAQVLOk41lwXAIIKhoqqJyFUYhkACCpYMqpiQqjEMgAQVLBUVKWEUIll +ACCoYImoygmhEssAQFDBElHVexkACCoAAEEFACCoAAAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQA +AIIKAABBBQAgqAAABBUAgKACAOA/b5sAGjsO2wBgMWaoAAAEFQCAoAIAEFQAADtzUXohIQQbAYDi +Dh9kmYIZKgAAQQUAIKgAAAQVAICgAgAgmU/5VeSTGQDE8InxeZmhAgAQVAAAggoAQFABAAgqAAAE +FQCAoAIAEFQAAHtyY0/o4O7efe4JCzAXM1QAAIIKAEBQAQAIKgAAQQUAgKACABBUAACCCgBAUAEA +IKgAAAQVAICgAgAQVAAACCoAAEEFACCoAAAEFVBICGMsAwBBBVPHVE4QlVgGAIIKpo6ps/9utQwA +BBUsEVMpQVRiGQAIKlgqpmKCqMQyABBUsGRMzbouAAQVNHMca64LAEEFy0WVmAIQVCCqxBSAoAL6 +hI+YAhBUIKrEFICgAvqEkJgCEFQgqo4+3wuAoILto0pMAQgqICOQxBSAoAIyQklMAQgqICOYxBSA +oAIyokpMAQgqICOqxBTAvN42AYwTVQDMyQwVAICgAgAQVAAAggoAQFABAJDMp/y4FIJtwJx8ehJo +yQwVAICgAgDoyyk/HnMKhdE5RQ30YoYKAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQV +AICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIKAEBQAQAIKgAA +BBUAgKACABBUAACCCgAAQQUAIKgAAAQVAICgAgBAUAEACCoAAEEFACCoAAAQVAAAggoAQFABAAgq +AACGCKoQPAs2JQAIquwCUAI2JQAIqowCOPtvbEoAEFQRBaAEbEoAEFQFCkAJ2JQAIKgKFIASsClh +szEKrDGoXkNuiOPwwim4iezYoc9+39iDfQbVq+mGEFOiCjZ7E23swR6D6tV8Q4gpUQWb7PeNPdhn +UL26bAgxJapgk/2+sQd7DKr3EDE1y96mUPT1fqgh6Ffosbsz9mDdQfXquiEY/rUKlBtLYgoqDJZB +Dmjlg8qRWlSBMSSmYLOoKhtUjtCiCowdMQUbRtXLswUgpkBU5XkXf9CmPJZ9nQJrft6Gife9XmC/ +t0mHg9tr3FcJYgrmjilgn8Fa55SfI7WYAvtnYKNBW+8+VLGn/zY6wtd4qDY1iCngx+BtdNCre1G6 +W3gPt7MXUwAwW1CJKjEFCzB2wODtH1SiSkyB/TKw+KB9DfnARJWYAvtnYKLB+m7+AJ+UgL2WTQmT +jz1jEJVf0ASD7jXck2/vY1PCQscwE+6wfkz1CaqrB6wAbEoQVcBkMdUvqH49cAVgU4KoAiaMqb5B +9bkBFIBNCaIKmDSm+geVArApYaOxZ4zCuoPq5VkDqL//F1Ow9qASVACV9/9iCtYfVIIKoOL+X0zB +HoNKUAFU2v+LKdhnUAkqgAZvqoG1B5WgAgAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQAAIIKAABB +BQAgqAAABBUAgKACAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQVAICgAgAY3NsmIEYI +//3zONK/7u/v/nx+zdPl/1rO0++LWd6vZZ59Xe7jSfnZSq3z6jnJ2ValX09PHj9AD2aoiPJ34Lo6 +wJWKiJQD7N2BN/WAzbNtZTsCuzJDRZeD8XHkH3zPZo5CSJudeTKbdrX+lkE7QkzFbq8VHj/AGTNU +dDkY1ziw1jjY7nAA/wzKqxnIu5gSPICggoTIuDroXh1YRz3ohuCUlcgESOOUH81iZdR1fJ9+zL1Q +use1Y6nrvLsearR46rHNAQQVw6l14HtyOurJz5USVqs9LynXt8V+ShBAUMHHQfdzFuMsQGqHSW5M +PQmrVtdsjRCkOwY5gKBiGne3Okg5WJaMqbuw2uX5+P6aX4H8/f922F4AgorlgyD3hp47z3ycPfZf +p/FSb00BIKjg4kD8/cm4mFNjKfd/OpsJyb2GJ+V+UzEXSK9wAfuvqGr9s7ooHRiV2yYgDCe8xUOp +gHny2GNjVdwAOzJDRbUYSfnep8srfdCOWV6tr225ztzt3PpxiTRgdGaoAAAEFQBAX075sbS7C6dH +OJU0w8/ocQEIKjY2w0F71bAQTMBOnPIDABBUAAB9OeXHY36tCAD8ZoYKAEBQAQD05ZQfl3xSCwDu +maECABBUAACCCgBAUAEACCqgiRDczwtAUAFZMfXr3wEQVEBkTIkqAEEFFIgpUQUgqIACMSWqAAQV +UDCURBWAoAIKBJKoAhBUQIEwElUAggrEVBhjGQAIKtg2pkQVgKACMTX4MgEQVLBNTIkqAEEFYkpU +AQgqYKzQEVUAggqWdBxrrgsAQQVDRdWTECqxDAAEFSwZVTEhVGIZAAgqWCqqUkKoxDIAEFSwRFTl +hFCJZQAgqGCJqOq9DAAEFQCAoAIAEFQAAAgqAABBBQAwibdNAECqcPKLJo8fH1cNN7+U8up7jpOP +v6as//PvPr+/xPpTlsEazFABUDSmnsRTie/pvX74ZIYKgKz4+J55+fu7EMLPWZmU2auY9YsjejBD +BUDRmDk7pdZq/Vf/P2bZT7/2OI7/rU/ICSoAiHIVLS2uFyq5Dtc3kcspPwCairmQvHUghhBOT1U+ +eQx/fyfQBBUALBNrtcPmc/l/QYagAoDqYi9ib/2zPZ2l+hVw7Ms1VAAkKXXbgpIXkH9eIF7r8T15 +bEJLUAHA4wD6FQ5PPoVXc/0ll3/3db/+sCen/ABIio7PU3U5YfIdY0++78n6RzPqxfiUYYYKqh94 +rv/AzFGV8nelouLue3JC5e5XzTx57E777SUcsa+4zxeIo8HlOw/vOgBwLBlqA1drGDNUAACCCgBA +UAEATM2n/CpyQSIA7MEMFQCAoAIAEFQAAIIKAGBnLkovxI3XAGBfZqgAAAQVAEBfTvlBbXf3I3O6 +GGB6ZqgAAAQVAICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIK +AEBQAQAIKiBFCGMsAwBBBVPHVE4QlVgGAM29bQIoGFOf/30c7ZcBrV/zd6/Rq6/7fs1/fs3T5Z+9 +AckZO2dvaL6XeffGJ/XxpPxspdZ59ZzkbKve278BM1RQOqaeDvbSy4CW/g5WV6/RUhHRcuwYc2W2 +VY3tP/hzY4YKar5bfLIDeLIMM1WsOnaOI/9AeTZzETt2YmbTrtbfMmhH2PfFbq/Syxxk/2iGCmrF +1Kzrgplez78OpjUOsDu8qfkMyqsZyLvwSdleNZYpqGASLQe3GSpGHgNXB92r1+6or+sQvInptV+a +eF/nlB/kDv7aO14xxUpahErqOr7Hc+yF9y3Hbul13l27NPJ+aJBTgYIKRo4qMcXK46b2wTVlHb9m +3VpcXD/i85Kyb4v9lGCvZQoq2CiqxBQzvfY/ZzHOAqR2mOTG1JOwanXN1ghBunucR3INFYw4qMUU +K/sLsO9rlXKuXSoZU99jcfXxmPpp5LP7f5W+B9Ukz4GggtGiSkxBn5ja/UL0v3D5/nO1jyq1zWos +szGn/KDGTinnoliY9TV/FzZnr++U+z+dfcIw93qblPtNxVwUvcIF7N/7uZJRlbLMQS5KN0MFtQ4w +YgrWGberjs+Y21vExmqN/eDAz0M4jsifrtZ5alh5ZyWmAMbaJxfe75qhgl7veMUUwDIEFfSMKjEF +sAQXpUOrqJrk5nSwpLvT7yOMxxl+Ro9LUMFQUSWmoP348zN6XIIK7FgAWDWo/DZuAAAXpQMACCoA +gM7iT/m5BgQA4P+YoQIAEFQAAIIKAEBQAQAIKgAABBUAgKACABBUAAB7+hfHbDX87cMFJQAAAABJ +RU5ErkJggg== diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 3bc8a61efe30..ffee1fbbc001 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -334,9 +334,10 @@ typedef enum fe_rolloff { <title>fe_delivery_system type</title> <para>Possible values: </para> <programlisting> + typedef enum fe_delivery_system { SYS_UNDEFINED, - SYS_DVBC_ANNEX_AC, + SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_B, SYS_DVBT, SYS_DSS, @@ -353,6 +354,7 @@ typedef enum fe_delivery_system { SYS_DAB, SYS_DVBT2, SYS_TURBO, + SYS_DVBC_ANNEX_C, } fe_delivery_system_t; </programlisting> </section> @@ -647,6 +649,18 @@ typedef enum fe_hierarchy { many data types via a single multiplex. The API will soon support this at which point this section will be expanded.</para> </section> + <section id="DTV_ENUM_DELSYS"> + <title><constant>DTV_ENUM_DELSYS</constant></title> + <para>A Multi standard frontend needs to advertise the delivery systems provided. + Applications need to enumerate the provided delivery systems, before using + any other operation with the frontend. Prior to it's introduction, + FE_GET_INFO was used to determine a frontend type. A frontend which + provides more than a single delivery system, FE_GET_INFO doesn't help much. + Applications which intends to use a multistandard frontend must enumerate + the delivery systems associated with it, rather than trying to use + FE_GET_INFO. In the case of a legacy frontend, the result is just the same + as with FE_GET_INFO, but in a more structured format </para> + </section> </section> <section id="frontend-property-terrestrial-systems"> <title>Properties used on terrestrial delivery systems</title> @@ -767,7 +781,8 @@ typedef enum fe_hierarchy { <title>Properties used on cable delivery systems</title> <section id="dvbc-params"> <title>DVB-C delivery system</title> - <para>The DVB-C Annex-A/C is the widely used cable standard. Transmission uses QAM modulation.</para> + <para>The DVB-C Annex-A is the widely used cable standard. Transmission uses QAM modulation.</para> + <para>The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It supports a subset of the Annex A modulation types, and a roll-off of 0.13, instead of 0.15</para> <para>The following parameters are valid for DVB-C Annex A/C:</para> <itemizedlist mark='opencircle'> <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index 61407eaba020..aeaed59d0f1f 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -45,8 +45,8 @@ transmission. The fontend types are given by fe_type_t type, defined as:</para> </row> <row> <entry id="FE_QAM"><constant>FE_QAM</constant></entry> - <entry>For DVB-C annex A/C standard</entry> - <entry><constant>SYS_DVBC_ANNEX_AC</constant></entry> + <entry>For DVB-C annex A standard</entry> + <entry><constant>SYS_DVBC_ANNEX_A</constant></entry> </row> <row> <entry id="FE_OFDM"><constant>FE_OFDM</constant></entry> @@ -63,6 +63,10 @@ transmission. The fontend types are given by fe_type_t type, defined as:</para> <para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter. </para> + +<para>The usage of this field is deprecated, as it doesn't report all supported standards, and +will provide an incomplete information for frontends that support multiple delivery systems. +Please use <link linkend="DTV_ENUM_DELSYS">DTV_ENUM_DELSYS</link> instead.</para> </section> <section id="fe-caps-t"> diff --git a/Documentation/DocBook/media/selection.png.b64 b/Documentation/DocBook/media/selection.png.b64 new file mode 100644 index 000000000000..416186558cb2 --- /dev/null +++ b/Documentation/DocBook/media/selection.png.b64 @@ -0,0 +1,206 @@ +iVBORw0KGgoAAAANSUhEUgAABIsAAAHpCAYAAAACi7yYAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A +/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBAiCLMGMtAAACAASURBVHja +7d3rkds4FgZQaMohTBY7ObRCV+fgyWJy4P6wJavVIgmSAIjHOVWu3bElPkBSAj5dgpdpmqYAAAAA +ACGEvzQBAAAAAHfCIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMDDD00A +21wul9XXTNN0aHnP749Z39o2rK0jRzssLX/pvVve9+61S69Jdey2bn/sMTx6TAAA/cIW+oVb+2tb +3p+izwioLIJsHYe9X+a979vae89ut6Pb1+txBwD0C3vZN0ERrFNZBAct/ZJxuVx2Vdg8v+/oLyEx +69j7xbq2/1u2e0u75Th2Mevf8ytVzDkDAOgXjtYv3LquVP0nQRHEUVkEBTsJve/r0hfu2hdz7e0W +27HQ4QAA9Avr7BcJiiCesAhO+GKK/YIt8SV+RscoNmippUPl1jIAQL/w3PUc7Y8JimAbYRGc9KVY +Yu6b3OsYNUTRuQAA9AvL9AtT9LsERbCdOYsAX74ZOiVbO1M6LQCAfmH7/TzohcoiqOhLK+eXV4p1 +xP4y1krF0X1bn7dXBwIA0C+ss19oagAoR1gEJ4j9osv5iPq965imKUk59eidwNc/AIB+oX7h/HpK +tzeMzm1oQJIv7Ra/eO/7sOWxtgAAtN0v1N+DdcIiyPQFlPP1JbZpTyehl19q1joQOhgAgH7hOf3C +Pct9tz36c7DMbWhQwPMXUYkOQ6517P3Sj/216axJEdfWoyMBAOgXpukX5uqv7Xm/W9JgnsoiSGxr +4FHiiyvlOu7v21pu/PqLzuuvOTHtlmIZW/bz+f1r6177ewBAv1C/8FwqjCCesAgSdwK2dAh63e+5 +fX8XuBxtt1SdkZhy6djt37vNOioAoF84Sr8wV39tzzIERvCd29Agg7knQ8T+unTk15mc64j5El17 +KsbRW75inrqR6glj79rELWsAgH5hmn7hmcckpt8HI7tMRjYAAAAA/KayCAAAAIAHYREAAAAAD8Ii +AAAAAB6ERQAAAAA8CIsAAAAAeBAWAQAAAPAgLAIAAADgQVgEAAAAwIOwCAAAAIAHYREAAAAADz80 +AQAAqVwuF40AABWbpmn1NbvDIh0BAKDGzg3n0T8EgD7sCot0BAAAmDNNUwj6iwBQlS3fzIduQ7vd +blobAMjuer1qhKZ6o4IiAGiZOYsAAMji0w+LAHC6jx0/unkaGgAAAAAPwiIAAAAAHoRFAAAAADwI +iwAAAAB4EBYBAAAA8OBpaAAAFDf3ZJa5J6htef3za5eeyDb3urWnxsQuM/V7jmxX7Dr3HIMUbfj6 ++qXjurZ977Zja1vuaVOAnqgsAgCgqKWB+rt/2/r6s7Z/z3aesf0x+1fjdgFQjsoiALpyfRng3J5+ +Fb7/2+3NL8Xv/m1pWa/veX7t/XXXN4OtuWXs+fe59c/t45H2erd/Mdu/9XX0b63q5zWkWHr9/d8+ +rtfFapOY9byz9L7X5e7ZzqVKmT2VP3ts2cc966+1MmfuGKkkAvhFZREA3XgON94FNnMhzlJQNLes +1/ffX/f62ue/fw1d3r3m9d/nlhu7/rX22rv8LW20d/voT8ztYbEBzNJrS4YMubbzzNCidLs+BzX3 +datsAjiXsAiALrwLfPYGE1uXtaVK5l2YNLes2OXurdI5svwtbaSKiFdbg5Cl18f821y1UupAZu92 +1njblwobgLG5DQ0AZqSofjkSnOSuvsmxf2fsB5SUMtT5vN2+LC82xNoziXaJNthyO11MBdHS7YUA +5CUsAmAo91u97rdGLc1jdKQi5t08QiH8uSVrTcwcSkekWv7avuTeD1hzD2TuwcOWqqIS8wa9C01G +nD/neV9fQzQAyhMWAUAma5NVA23KEeLMhUZHJ5g+e/9jXyscAqiLOYsA6MK7+XLW5gWK/fdnsYHP +2uvWJtveu969ti5/bxsJzNgTDOx5JP2z1yAmNsC4T7j8+ifXdj6vs7VjlGsdQiSAc6gsAqAbz7eY +Pf9dqmVtWd7cbWivE0LPbe/rv80tL1Vb7Vl+TBvl3g/a8nx70dIj7e9/v/b6mKer1bBfc9tZ65w8 +pdt1bh1zQdFaGwNw3GWapmnzmy6XQx1wAIAt7gHTjm4LJTuWv/uI084QYC482Pv6LfMSvXtc/Nag +pNR+xb7+yLYeXX9MG669ZunYpN7mEeeJAsZx/4y7/P7vmP6U29AAAChq6yPm9z6S3n7t34/c648J +Z97N49TKuQDQOpVFAED1VBY10rGMrCwCAMpRWQQAAADAIcIiAAAAAB48DQ0AADqSciJsAMYkLAIA +gI4IgwA4SlgEAADAZh9/X9/+/ed/t8Ovf37t3PKWXje3rq3LTP2eI9sVs961969t59r2LbX16zJi +t+Xzv1vyduE4YVHpD9SZsuDnX4COlA7HLD/Ferase2lZW7Zh6/a+vn6pDda27912rK0vVbsCAEB1 +45qFwf3H39dNIcm715fY/rWQKsV7Wj5me93Dn6VlxgZKnEdYVPLiXAgTPq7X6BBh7rWpln/kPWv7 +LigBAIDGxzUrVT+vocTS6+//thYs7A1plt73utw927kUeixt3xnhWEybzO13qe0VHtVDWFTq4nwK +cmKDni2B0NLy7/82F/4srWdPYLRneVvWUWvgNNfuAjIAALoZ10TcHhYbwNz/LiYwStpvf3PbU47t +zL0v727/WqvqijlmEEIIf2mCAh+oK0HR0UBhbflbbuVKsT1ry4vdhhRt/nm7PdZdYr0AADCCreHC +0utj/m0u3EkdcuzdzntQ09MxS7Gud23iFrQ2qCwqeXFmrjBZWv7n7XZ6WFLDNgAAAGNLGeq8Vilt +ndz53fKO7sMZc0DlPjaCpfKERTVfKBsmqy617hr2de21qeduAgAAzvM6YfKWypQS8wa9q6IpVT3z +vPyYp4pBLGERu55i1sSXytO2q2oCAAAe44MMIc5caDQ3B1KSsVzF4dC7p6KthWgqiOohLKr5A2zj +RNW511/LurY8NQ4AAEhv661OMY9RXxwDPAUP9/+OGjtsDB+ObufzOnMFOTHLnZvoWhhDLBNcl/xA +PRherIUka7dfLS333Z/a9j/VOoRIAACwc0wy86SzL/3tmadvLU12/Pra2vZryz6V3OZ3f44eMwhB +ZVGZi/jpFqi5qqAj1UJry495Gltupbdhbh1zQdFauwEAAL/72i+PkU/x+hoeRb93O/fMi1R6Iuet +xyz1emNDQRNc10NYVOoieQl0jnoNN2KWXyoo2jMH0lnbfKTdzm5nAAA4bXyzMJnyXHVLC0FA7fsV +cxveu7mCWjoG1EFYVPKDZ2GS5diAYW0ZtQYYJZ/gtrSuexs9h201txsAAFQ7vtkYMGx5/dHXHgk/ +atmvI+9PNYF0ioqvGqrG2O4yTdO0+U2XSwghhJuBNABQwPV3qL+j20LJjuXvPuL9KPnRBWCbtVvE +hCrsOq9+96Muv/87pj+lsggAAKDFAeBLsCBIaJ9jSC2ERQAAAB0QHgGpCIuI++JZmZRbmTkAAFTW +h98QHn1cPzQYFPR5+6x6+4RFRJ7IN40AAAA19dGfwp+Yx6HHPr4cQFgEAADQuNfwZy08inkEOzAu +YREAAECjYiqKdvl50bg04Ujg+Xr7Ze5bw1q63VNYlPzgXzUCAP13zNyeDJB/bJErCAKKB0WtERYB +AACcNWA9IRBy6xnDX3eColXCoowUbgLQk0kTAMQPRguFQItPOHuzDXuCoss/jieV9Ul+Hrg2TwqK +WnvioLAIAABgy6CvgiBoz/apKGL4a1dQFE1YBAAA8DywK3hrWOoAJ1U1EXR3XQuKNhEWAQAAYwwW +Gw6B9u6foAgERXsIiwAAgLYHgoUnia4tgBESwcL1UUlQ9Hn7bCo8EhYBAAB1DvJOenR860GLoAh+ +f4ZUFBS1RlgEAACUH8R5ZLx9hJyfMYKiQ4RFAABAuoGSEMj+w9mfQ4Kiw4RFAADA+iBICAS08Fkl +KEpCWAQAACMPrMwLBPTyeSYoSkZYBAAAPQ6ahEDASJ95gqKkhEUAANDaoMgtYQB/PhMFRckJiwAA +oJYBjxAIYNvnpqAoC2ERAADkHlQIgQDyf+4JipIRFgEAwN4Bg3mBAKogKEpLWAQAAK+DASEQQDME +RekJiwAAGIpbwgD6ISjKQ1gEAEAXhEAAZPl+GSwoCkFYBABA7Z10IRAAZ30HDRgUhSAsAgDgrA64 +eYEAqPl7atCgKARhEQAAR/17CSGEMP186WSHa9HNEAIB70zTNMy+Xi4XBzyRkYOiEIRFAAAs+ff8 +gYcQCICSRg+KQhAWAQCMSQgE0J25KioVR/EERb8IiwAAenJGCPS/6ctgZHp0sG+OB0AFXkMk4dF7 +gqI/hEUAAC04qxLof5O2B6B7gqKvhEUAAGcSAgFQ2HOlkSojQdE7wiIAgFxOvCUMAFgnKHpPWAQA +sJUQCIBOjFxlJCiaJywCALgTAgHAEARFy4RFAED/zAsEAKvuVUa9VxgJitYJi6DmD+uf7//+8s/6 +a969ds/yU6xn636uLWttu9e2dakdX5cRuy2Xf/K2ETBDCAQAbHBWUPS63toJi6BSS8HD9DM+eJh7 +barlH3nPme2y5h7+LC0zNlACdnaq/r5+v/Zzh0NCIADotsJIUBRPWAQ1fjg/BSKxQc+WQGhp+fd/ +mwtJltaTOzCKbZe5fSoV6giPYKXD9BQCFSMEAoCx+x+Cok2ERVCZtUBk6e9TLP/5dqrY8CfmFqy1 +7Xm+/evdenO3C5CgMyQEAoC+xibT1EV1kaBoO2ERVCp38LG0/CPhT+vt8q4dlsIrARVDdBTffB58 +hGv29X7+d3v8/+v1+ui0AgDEqiUo+rx9NhUeCYug48FcCOfPI7T3faXmQOrtWECJa/eo5xAIAKi8 +v9Dw/EU1BUWtERYByQaXe8OQ5/fVXNUEvVyruQiBAIBaCIqOERZBJ7ZOVJ17/bUParfs1+utaGu3 +oKkgIqczrpfHuf+l43NzMABgpD5IQ/MXCYqOExZBxQPCI6HDWoVOzCPhlwaNJQa8c3MFCWPo9Zov +zbUEAPRGUJSGsAgqE/M0siOBydryY546VmKw+jpwzt0ukMtZlXOuBQAgeb+m8uoiQVE6wiKo0Gsw +kmKwOjcvUEuTMadul63rjQ3STHA9SGdJCAQAUA1BUVrCIqjU0m1ksYPFtWWcFWrEPHZ+7rH1Z243 +43BLGADATD+pwuoiQVF6wiKoWMzgce01a4HMGQPZLWFXim3J3Y4G+w11boRAAABdERTlISwCoHlC +IACAgn2v6dczUmurMBIUpSMsAqDejoh5gQAAiCAoSktYBBQf4BuIIwQCACAVQVF6wiLAgJyk3BIG +AEApgqI8hEUARBECAQDwpX9Y4ZPRchgtKApBWATgS14IBAAAb40YFIUgLALolnmBAADI3ufsuLpo +1KAoBGERQHtfyEIgAADIauSgKARhEUBV3BIGAEBzfdjOqotGD4pCEBYBlPkCFQIBAED1BEW/CIsA +DhACAQCMpbYKmmmaqtmO1quLBEV/CIsA3n3ZmRcIAACGISj6SlgEDEUIBABAT16reWqpNGqJoOg7 +YRHQDbeEAQAAWwiK3hMWAdUTAgEAQGQ/9qnSqHSVUWvzFgmK5gmLgNMIgQAAgDMIipYJi4DkzAsE +AADnu1f5mMfoK0HROmEREE0IBAAAtOysoOh1vbUTFgEhBLeEAQBAr0pWGNU8b5GgKJ6wCDonBAIA +AEYnKNpGWASNEgIBAACb+vODzmEkKNpOWASVMS8QAABAGrUERZ+3z6bCI2ERFCIEAgAAanC5XLJW +F9Uyb1FNQVFrhEWQ+oOxUCgkBAIAAHaPJzIHRmcTFB0jLILaPrSFQAAAALsJio4TFkEhQiAAAKCq +MUqH1UWCojSERZD6A1coBAAAUJygKJ2/nE4AAABASqUrlgRFaaksghQfhD+1Af1QHQcAQEsERemp +LAIAAIBB1fCI+yMERXkIiwAAAIDmCYrScRsaJOYWHlrkVkoAgIHHMB08FU1QlJbKIgAAAKBZgqL0 +hEUAAABAkwRFeQiLAAAAAGaMFhSFICwCAAAAeGvEoCgEYREAAADAN6MGRSEIiwAAAGB4l8sl+TJb +fsLayEFRCCH8cEkAQJkOTo5OGAAAaY0eFIUgLAJgcCV/8VpalyAJAOB8gqJfhEUADKPmUuh32yZA +AgAoR1D0h7CIrgduBlp9DqqdM4xyHj9vv3MTACAfQdFXwiKAmcH5K4P19o9hT/vlfAQASENQ9J2w +iO4HjQZUGKyPeXxG2V/nIQCQyuVyGa5PJSh6T1iEgR0kOIcN2H2OOA8BANoiKJonLAIwYG+6vfne +Ls5BAIBlgqJlf2kCeh/oGVRyxvntvNO22gkAoE6ConUqiwAyDthDUOWRsi1xDgIAHHFWUPS63tqp +LAIoMGAXdhxrP5yDAABHCYriCYsYYuBnkIQBu/ZCmwIA4xIUbSMsAjhhwI42Ort9tTEAMApB0XbC +IoYZABoY4Vpoo120jfMQACCVWoKi1ibRFhYBGKhrD+0OANAdQdF+wiKAkwfqBusCCwAA0hIUHSMs +YqjBoAEp1Pe54LoEACAlQdFxP5xGAOebpilcLpfh9rkVKY6NUAwAID9BURrCIoBKjBQY1Rqc5Gz/ +uWULkQAA0hAUpSMsYriB4YgVHLR1rfR+ftb0eVBDW79ug/AIAGA7QVFawiJgqIH5O7UNznsOjGpo +69rb9nn7BEcAAOsERekJixhuIN77YJxjg3OD9D4/C1q93gVHAADLBEV5CIsAKhyk9xZonhV09NSG +giMAgGWConSERQCRg3QD9PaOmXMSAGAMgqJkHc0Qpin85ZQip5oHMgZZ7BmglwwhejlHS+/HSLeY +lj4nAQBqJChK2nkPIQRhEW0NisAAvbXvmslxse8AgDFcNoKiPIRFGMhCxV9+LZ+jpYMitAMAQA6j +BUUhCItoZKB4HwAZCGFwPt71v9b+joE2AQDa6sO1ZMSgKARhEUCSwTnaXfsAAPRl1KAoBGERmbSU +SEvPcY62t72CkPh20lYAANuNHBSFICyikcGOQSKtnaejEhQ5PwEAWjd6UBSCsAjAgFwbD9N22g8A +YJmg6BdhEcnlmNi6pW0G134egg7tCACQk6DoD2ERBjuAa157AgAMTVD0lbCIpFqu0FFdRM2D8NrP +z5zbJ9jQrgBAe/25lvoagqLvhEU0O5Ax0IE+OxbU8zkLANA7QdF7wiIAqiXM0MYAALkIiuYJi0im +xYmtc+4DBt+ue+0IAECdBEXLhEUYlAMAAAxstB/NBUXrhEUAVNepEAQDAJDDWUHR63prJyyiukHj +1kFi6kGlW9HgXIIiAAD9uRwERfGERQAAAEDXBEXbCIs4rMdKHNVFcM41oqoIAMDYJzVB0XbCIqqy +d6BogAkAAMCrWoKi1ibRFhYBsImqIgAA/boW+nSCov2ERVTz4VLbQNGtaAAAAG0SFB0jLKIbqhLA +9QsAQJyefxwXFB0nLIJBP0BpSy1himsCAICaCYrSEBZRxaAx1UBYdQK9XRsAANBKf/Xs8ZigKB1h +EQCnEvICAHCUoCgtYRG79Dyxdc59Bdc9AABn9ud67NMJitITFtEdVQoAAABjEBTl8cOpBZBOjl9q +eg5AhbsAAG32UWvs1wmK0lFZxKkfNLk+UFIv1+03AAAA9RIUpaWyCCCRnkNFgSkAgD7cnLOrigRF +6akswoDRvlMxt2kBAMA8QVEeKovodhB8uVwEPBTjXKvvMwAAQL9Uny6F0YKiEFQWAVT7hSxMAQCA +c40YFIWgsoiTBsSlBsGpq4umaTKAJ9t1AQAALfVHex8bjRoUhaCyCKDKL+aavngFYgAAjGbkoCgE +lUUAmwlPjlOhBwDoC+rP1Wr0oCgElUWc8IFY+kMl9fp8OYx9HZQ4/oIUAAA4h6DoF5VFACtKBoSC +IgAAatdrn1VQ9IewiKID5V4+VEx07bz3pQsAAP0QFH0lLGIIqZ+KRl9qODcERQAAtDK26o2g6Dth +EVCMwG6cL1wAAGiBoOg9E1xTbHB/9oDYRNfUSFAEAEAr/dbe+q6ConnCIoATv3BrJxQFAKBHgqJl +bkMDKGz0aiLVVAAA+m5nEhStU1nErB6fguZWNM4+/wQlAABwnrOCotf11k5lEUBmAiIAAPRjzyco +iqeyiLd6rCrKtT2qi5g7z1QSAQBAHQRF26gsAjhIIAQAgL5tvQRF26ksAjhomqYvfwAAgDrUEhS1 +Nom2yiLeDnxTqTWVvlwuBvUUuYZUHQEAUKve+6qCov2ERQAZCY4AAGihr9pbf1VQdIzb0Fj8sDjC +wBi+X18q2gAAIC9B0XHCIoYlzOIsQiMAAGrup7bcVxUUpSEsAjjxyxgAAEhDUJSOsIgsA9dWqnZU +F1HDdSc0AgBAP/UYQVFawiKASr6MAQCA7QRF6QmLACohMAIAoMY+as39VEFRHj+c+qQepLZ2a9fl +ckm6/9M0ub2t4XPj7C9C5w8AAOwjKEpHWATw5F1QUzpAEhgBAFCbe5+41n6qoCgtt6ExdFVRru12 +O1FfLpfL40+L1yUAAPRMUJSesAhgg5LBkcAIAIDa1NZHFRTlISwC2KlEaCQwAgCAc40WFIUgLBqe +W9Dybb9B/jgERgAAjDaOHKWPOmJQFIKwCCCJ0nMaAQAAeY0aFIUgLCLhQBnIdy2oLgIAoDY991FH +DopCEBa5sMk60NfGzqPWz6cc++K6AACgZqMHRSEIiwCyUG0HAMAIevshUFD0i7DIBW1QnHl/VFHg +fAIAgPoJiv744XQAyONyuQh3AIDmTdOkavqlj1fzsXKO7CMo+kplEUBjnQkBFAAApCMo+k5YNCC3 +oJXfL4N7AACgxDjm+U+r48ySBEXvCYsACnxp+zIGAIC6CIrmCYsGo6rovP0zuAfXAwD47qb0mKZk +lVFL54mgaJkJrvGFAax2MlzvAAD0QlC0TmURQAGeIAIAwNn90RJVRrX/yHhWUPS63toJiwaiMsAx +wPkEAACjEhTFExYBcAphFwDAOXJXGNXYzxMUbSMsAgAAALolKNpOWDQIv+A7Fpyv5XmLzLkEAOjH +6p+2eL7UEhS1Nom2sAgAAADojqBoP2HRAPwC4JjgXLL9AAC8U+IJaWcQFB0jLAIAAAC6ISg6TlgE +QBTzFgEA6OttcUYVuaAoDWFR59zi4diAawEAgBEIitIRFgEAABDFjzx9a7m6SFCUlrAIgFM7EAAA +cISgKD1hUcek/o4RuBYAANiitR8HBUV5CIsAAACA5gmK0hEWdcqv9I4V5JLr1ybXAgDov+Kc2UtQ +lJawCAAAAGiWoCi9H04rYpjU9iu/puAz4ZLlOpimyecNAECnfb0cBEV5qCzqkCDDMcNxBgAA0hgt +KApBWEQEv/IDJQnVAACMA2sxYlAUgrDIIItqPjgdO1wHrgcAMO6AeowaFIUgLAJoml98AAAgvZGD +ohCERRiIahuK6PXXN9VFAAD01rcbPSgKQVjk4sMxBNeENgYAIIQgKLoTFjFL5Qzgs6JvgiIAfI/A +H4KiP4RFYJCMjpT2064AAEMTFH0lLNLpx7GkUTWFlbm3xXWhPQEAchEUfScsovpBKBiU+9wYrS21 +IwBAGYKi94RFOv5UOEB2TF2baNMcbaf9AICzxzo1ERTNExYB+OJuarsEHtoMAOAoQdEyYRHNDELB +4NxniPbVVgD4nsH5cpSgaJ2wyMWGY4tjp507bR9tBADw1VlB0et6aycsAkg8QM+theq/UtsoENEm +AACxBEXxhEU0NwgFA3SfJ+/aH+0AADBHULSNsMigAMeYho5Ta4Fu6cBo1GtGWAkAME9QtJ2wiGYH +oWCA7rNl7rg4BwEACKGeoKi1SbSFRQ0PEHCsOW9wfsZxEehuP072DwD0Vxm3Dyoo2u+HUx+g/g5Q +60HR5XI5pR3v6+whaNMRBwCIJyg6RlhENwMpMCCv/3PmrPZ9Xm9rn3fOSQCAbQRFxwmLDGZpYEA8 +TZPKiMHPKddHnvOwxrZ1nQAA7CcoSkNYBFCxHqv+agiM7l6344z2Fg4B0INeftyk7XNFUJSOsAgf +6uDaPGXfagxJ5rYpxbEQCgEA5CMoSktY1BiDjXEHwn6tGe8ccp347AUAYJ2gKL2/nFYGpIDr8sx9 +9TkEAMBegqI8hEUN8cu2Ab9zwHljv9H2AADvCYrSERYBGLTbf20OANA0QVFa5iwySABci1W1hQo6 +5xwAwBaCovRUFjXC4MmAzLngHBmpTbSLcw4AIIagKA+VRQAG7FW3kYDUOQcAcKbRgqIQVBY1IcdA +yaDBOcF5A3bXn88r5xwAQBtGDIpCUFkERQZqwh0M1tO0n2vJOQcAUMqoQVEIwiIAA/YG21No5JwD +AMhp5KAoBLehVc8taAZvJc8N0h1vt/6UaWO0CQB9j13gDKMHRSGoLAJINlDn3HYfsYPqvAMASEtQ +9IuwyMACcB11dVxGCI2cgwAA6QmK/hAWVUwZZ3+Du9THdJomg0aDcRaOXS+fo85HAIC8BEVfCYsM +DnBMnX8Mc821FB65BgFokR8zaZGg6DthEaT+gvypDaBW7zqvNQRIOtUAAOcQFL0nLAJgaEtBTcog +SSAEAFAXQdE8YREAzBDwAAD0SVC0TFgEKQaU//z637lb0O7/DgAAwLkEReuERVBAzDxGAiUAAIC8 +zgqKXtdbO2ERVGItUBImAQDQRL/WE9G6O569EBTFExZBQnOBToonpKlOAgAA2EdQtI2wCAqICXEE +SgAAAOkJirYTFkEl1kKcFGFS7HIESgAAHOpzuhWNStQSFH3ePpsKj4RF0IhS1UkxyxEmAQAAtasp +KGqNsAg64nY3AACg6jFLoYozQdExwiIY7cPZ7W4AAEDHBEXHCYuAL2q63S12ewAAgPSmaWpumwVF +aQiLgM3MnwQAANRGUJSOsAjIwvxJAABj80Q0ShIUpSUsAk5j/iQA8i3Z/QAADThJREFUAOAoQVF6 +wiKgWm53AwAAlgiK8hAWAU1zuxsAABCCoCglYRHQPYESAAD0TVCUlrAIIJg/CQAAWiUoSk9YBBDB +/EkAADv6NZ6IxnM/NsO5ICjKQ1gEkOrLz+1uAADQndGCohCERQBFCZQAAGjBNE0aIYwZFIUgLAKo +jvmTAADgfKMGRSEIiwCaY/4kAKAl5i1q85iNbuSgKARhEUCX3O4GAAD7jB4UhSAsAhiW290AACjW +92ykukxQ9IuwCID3X+gV3e4Wuz0AALCXoOgPYREAu5k/CQCgL6POVyQo+kpYBEBW5k8CAKBmgqLv +hEUAnM78SQDQN09Ea+c4jUZQ9J6wCIDqmT8JAIDUBEXzhEUAdMH8SQAAB/o3g1UVCYqWCYsAGIb5 +kwAAEBStExYBwBPzJwEAI1FR9HnKemsnLAKADdzuBgDQJkFRPGERACTmdjcAePO95YloVR6TIn2j +Co67oGgbYREAnECgBABQhqBoO2ERAFTK/EkAQA4jzVNUS1D0eftsKjwSFgFAo86cP+kjXL92gP67 +OSAAQFVqCopaIywCgI6VCpQ+/r6uvkagBIB5i85t+1P6Iicdb0HRMcIiABhcqdvdBEoAQAmCouOE +RQDAonuYNH3p/Ny+do4igqCoTtbMch6B1b+XEP43OSgAEOHsuYnOqCoSFKUhLAIADoupCEoVKIV/ +VzqewiQAGJKgKB1hEQBQRLFA6d+IXzEFSgB0aKSnnH3rQwiKkhIWAQDVmAuUrtfrr05wovmTBEoA +0A9BUXrCIgCgHTEBzr+J5kcQKAGEEH7NO5OyYqX1J6KNXL2z9bwpQVCUh7AIAOhLTYGSMAkAihEU +pSMsAgDGUypQUp0EwIDOqBwTFKUlLAIAeGctxHG7GwBUQVCUnrAIAGAPt7sBwDelq4oERXkIiwAA +cnG7G9BRAGCSa2LOkx6NFhSFICwCADiXQAkAqjViUBSCsAgAoH7mTwKgcj1WFY0aFIUgLAIAaF8l +8ydNP0O4/ONwANC+kYOiEIRFAABjKBQoTT+fOtrhGvWez/9ujg80wLxFLJ0bPRk9KApBWAQAwF2p +291eO+V/X1dfI1ACoARB0S/CIgAA4qyESZfL5UtlUdLOu0AJoEo9VRUJiv4QFgEAkG7Q8E8I06OT +fYvrnEcEQSmWI0wCYPY7RFD0hbAIAIBTxYQ4KQIl1UkA6ago6puwCACA6q2FOKWqk2K2BYB2CIre +ExYBANC8UtVJscsRKNErT0Tjfh70QFA0T1gEAMAQagqUhEkA5xIULRMWAQDAfbBg/iSAWSqKxiEs +AgCADcyfBNCus4Ki1/XWTlgEAAAJud0NtjFvUf1UFKVdbwuERQAAUJjb3QDKEhRtIywCAIAKCZSo +VeonolH3se6BoGg7YREAADTK/EkAK59flQRFn7fPpsIjYREAAHTK/EnAXj1UFdUUFLVGWAQAAANz +uxvQI0HRMcIiAABgkUCJV6nnLfJEtHqOaw8ERccJiwAAgMPMnwTUQFCUhrAIAADIzvxJUKeeKroE +RekIiwAAgCq43S3xAPZpPwVk9E5QlJawCAAAaEYNt7u1GLx8/H0VGNHtvFCCovSERQAAQDdKVCe1 +WpkkMKJHgqI8hEUAAMBQSlQn1TBv0ud/t2/bkTIw8kS0Oo3choKidIRFAAAAzwO/CsKkmO2I3Zec +gRFUc90KipISFgEAAGwZlJ44b9KekCdnYNRCFYtqpQGuSUFRcsIiAACAlAPXjPMm7b29TYUR3V5v +gqIshEUAAAClB7iZAqWt74kJjKafjhdjGy0oCkFYBAAAUKV3IU6qW9y+L3PS4PDu+hgwKApBWAQA +ANCMUvMlAeMGRSEIiwAAALqR6va2PXMZnTWwtl7r7Wm9tRAWAQAADCBn1ZEgwXqtty/Coozc9QsA +AJwt5glqHwb01mu9p663NsIiAACAzsQERAb01mu9day3RsIiAACATpQKiUYc0Fuv9Y5EWJTY5+2m +EQAAgHrGKAkDolEH9NZrvaMRFgEAAHQoR0g04oDeeq13RMIiAACATuQKiEYd0Fuv9Y7qL00AAACA +Ab31Wi93wiIAAAAM6K3XenkQFgEAAGBAb73WW3C9tRMWAQAAYEBvvdZbaL0tEBYBAABgQG+91ltg +va0QFgEAAGBAb73Wm3m9LREWAQAAMEuQYL3W2856UxEWAQAA8JYBvfVabzvrTekyTdO0+U2XSwgh +hNvt5tMTAMjuer2GEELY0W2hZMfydx9xenSO9RWhFS3fLgMtKhkgffzuR11+/3dMf0plEQAAAAAP +wiIAAAAAHn5oAgAAgLG1OKcKkI/KIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwYIJrAAAAivq4 +frz9+7mJtre8/vm1SxN3z71ubl1bl5n6PUe2K3adW4/DWvsfPb5737PlmJrc/T2VRQAAABSzNHB/ +929bX3/W9u/ZzjO2/+gxOrrcrcve856alt8qlUUAAAAUsVb18zpoX3r9/d8+rh+L1Sdbq19itu91 +uXu28/73qapz9tiyjyWWneo9Z+xvb1QWAQAAkF3M7WGxAczSa3Pac9vbnu08M7RYu+3r8/b5eM3W +dj/aFjmO8xnnUQuERQAAABSzNQhZen3Mv81VK6UOZPZu52i3Qe1p99zhmYqi79yGBgAAABFShjqf +t88vy4sNsfZMon10H9fmYzozbMndHqMSFgEAANCleyBzDzS2VBWVmDfoXfVTrsqnFPv4/HevYRd9 +ERYBAABApBwhzlxodHRC59T7WGM4pIIoD2ERAAAAxWy9bWntaWdrnquL7v8dY2sIcXQ7n9d55oTd +e7Z9yzHds2+520OF1HcmuAYAACC7mKdOzT1ZbG0enVqeHrZlO1sLKO5PQXv9s8WeY5b7ONdyHtVG +ZREAAABFPM9zs6UqaOn1MQP8Ek/T2rOde+ZFamVC55T7lqo9SsxD1QuVRQAAABSz9RHzex9Jb7+O +i7l1b8utc3uqkfa8p6blt+oyTdO0+U2XSwghhNvtpgUBgOyu12sIIYQd3RZKdix/9xGnRwdcXxEA +zvbxux91+f3fMf0plUUAAAAAPJizCACA09yrxl7NVbBvef3za5cq4udeN7eurctM/Z4j2xW7ztT7 +eH/t2nGda//YZS7tz1q77DlmAL1SWQQAwCmWBvbv/m3r68/a/j3becb2x+5jDccixTLn9qXm9oc9 +Pq4fi38gRrHKopikvvQvG3vWs+fLxS8yfpEBAOb7DDH9taXX3//ter0u9pP29AvXtu91uXu2c6mP +d6RftsWWdR89FiXsOWZ7zw+ojcmaSaFIZVGqXx5S/nqzd3v37r9fZAAA1sOGd3+/9votPz6msue2 +tz3bWWvgcsaxOLq81tof4EzZK4u2/mq05XVry1/7ZWPLLw4pvlBTbXcNHQS/yAAAOfoae19/u90W +K5zvP3jN9V9S9lf2budaFXlpe6uacrRnquW11P4AZ8paWbT1V6PUy6/h1wO/yPjCBQD6kzNcWqrk +fve61z9792duOTX05e7bkONHyL3tD9CzIreh5f6CWftlo9aORMntzn1Puy9XAKBmr2HDliqSEkHK +7XYTWpx8fmh/gD9+1LhRZ06SfOQLodQEhEe+BN+VYKdc9mtbqCoCAHqVo5/zroJmy5QKqfclV9+x +tr7snvYH6NmPkXe+9nCn1Q6T0AgAiO2LbekjrD3tLKav8lwtErvuPU/KPbKdc/2qVo5diW0+crtd +D+0PkNtfNW7UvQz0tRz0zKdb7Nnu5+2v5YumxPbMlfECALz2tbY+DGTtCbO1PBxky3a21E86eiy2 +PiE4VT+9l/YHKKVIZdHR0s21JyDs/WWjhvmM/CIDAIzouX+3pSpo6fUxfbsSc2nu2c49fdaUUzds +DWy27mOq45dif1K1P0DPslYWbf3VKPXya3uKQ6rt9osMANCDrQ/7qPmhJr3u17uK8b3bnGo/j94F +0Op5BVDSZZqmafObLpdNH55rQcJrBcrWx83HLv/19ak+/Pc+Qn7rdqfc19flbA1+UuwLAGz9rt3R +baFkx/J3H/F+lD59/wPA6T5+96Muv/87pj9VZM6iFGn93mXU8uQGv8gAAAAALShSWQQAcITKokY6 +liqLAKA6eyqLfmg2AADoj2kCANhLWAQAAB0SBgGwl7BohV9kAAAAgJEIi1YIgwAAAICRCIsAAMji +Y6VCGwCo01+aAAAAAIA7lUUAACR10QQA0PZ3+TRN0+Y3XXQBAIDydnRbKNmx1EcEgC76UyqLAAAo +1vkEAOq3KyzSEQAAAADokwmuAQAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA +AA/CIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA +AA/CIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA +AA/CIgAAAAAe/g/10lQlA3JSSwAAAABJRU5ErkJggg== diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index afc8a0dd2601..cea6fd3ed428 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -178,11 +178,3 @@ in the frequency range from 87,5 to 108,0 MHz</title> </biblioentry> </bibliography> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index a86f7a045529..c79278acfb0e 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -1168,6 +1168,8 @@ dheight = format.fmt.pix.height; </section> </section> + &sub-selection-api; + <section id="streaming-par"> <title>Streaming Parameters</title> @@ -1195,11 +1197,3 @@ separate parameters for input and output devices.</para> <para>These ioctls are optional, drivers need not implement them. If so, they return the &EINVAL;.</para> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index b68698f96e7f..c736380b4647 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -1082,7 +1082,7 @@ until the time in the timestamp field has arrived. I would like to follow SGI's lead, and adopt a multimedia timestamping system like their UST (Unadjusted System Time). See http://web.archive.org/web/*/http://reality.sgi.com -/cpirazzi_engr/lg/time/intro.html. +/cpirazzi_engr/lg/time/intro.html. UST uses timestamps that are 64-bit signed integers (not struct timeval's) and given in nanosecond units. The UST clock starts at zero when the system is booted and runs continuously and @@ -2376,6 +2376,23 @@ that used it. It was originally scheduled for removal in 2.6.35. <listitem> <para>V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to userspace.</para> </listitem> + <listitem> + <para>Add selection API for extended control over cropping and +composing. Does not affect the compatibility of current drivers and +applications. See <link linkend="selection-api"> selection API </link> for +details.</para> + </listitem> + </orderedlist> + </section> + + <section> + <title>V4L2 in Linux 3.3</title> + <orderedlist> + <listitem> + <para>Added <constant>V4L2_CID_ALPHA_COMPONENT</constant> control + to the <link linkend="control">User controls class</link>. + </para> + </listitem> </orderedlist> </section> @@ -2489,6 +2506,9 @@ ioctls.</para> <listitem> <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para> </listitem> + <listitem> + <para>Selection API. <xref linkend="selection-api" /></para> + </listitem> </itemizedlist> </section> @@ -2507,11 +2527,3 @@ interfaces and should not be implemented in new drivers.</para> </itemizedlist> </section> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 3bc5ee8b2c74..a1be37897ad7 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -324,12 +324,6 @@ minimum value disables backlight compensation.</entry> (usually a microscope).</entry> </row> <row> - <entry><constant>V4L2_CID_LASTP1</constant></entry> - <entry></entry> - <entry>End of the predefined control IDs (currently -<constant>V4L2_CID_ILLUMINATORS_2</constant> + 1).</entry> - </row> - <row> <entry><constant>V4L2_CID_MIN_BUFFERS_FOR_CAPTURE</constant></entry> <entry>integer</entry> <entry>This is a read-only control that can be read by the application @@ -345,6 +339,25 @@ and used as a hint to determine the number of OUTPUT buffers to pass to REQBUFS. The value is the minimum number of OUTPUT buffers that is necessary for hardware to work.</entry> </row> + <row id="v4l2-alpha-component"> + <entry><constant>V4L2_CID_ALPHA_COMPONENT</constant></entry> + <entry>integer</entry> + <entry> Sets the alpha color component on the capture device or on + the capture buffer queue of a mem-to-mem device. When a mem-to-mem + device produces frame format that includes an alpha component + (e.g. <link linkend="rgb-formats">packed RGB image formats</link>) + and the alpha value is not defined by the mem-to-mem input data + this control lets you select the alpha component value of all + pixels. It is applicable to any pixel format that contains an alpha + component. + </entry> + </row> + <row> + <entry><constant>V4L2_CID_LASTP1</constant></entry> + <entry></entry> + <entry>End of the predefined control IDs (currently + <constant>V4L2_CID_ALPHA_COMPONENT</constant> + 1).</entry> + </row> <row> <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry> <entry></entry> @@ -3329,6 +3342,16 @@ interface and may change in the future.</para> <entry>The short circuit protection of the flash controller has been triggered.</entry> </row> + <row> + <entry><constant>V4L2_FLASH_FAULT_OVER_CURRENT</constant></entry> + <entry>Current in the LED power supply has exceeded the limit + specific to the flash controller.</entry> + </row> + <row> + <entry><constant>V4L2_FLASH_FAULT_INDICATOR</constant></entry> + <entry>The flash controller has detected a short or open + circuit condition on the indicator LED.</entry> + </row> </tbody> </entrytbl> </row> @@ -3357,11 +3380,3 @@ interface and may change in the future.</para> </section> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "common.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-capture.xml b/Documentation/DocBook/media/v4l/dev-capture.xml index 2237c661f26a..e1c5f9406d6a 100644 --- a/Documentation/DocBook/media/v4l/dev-capture.xml +++ b/Documentation/DocBook/media/v4l/dev-capture.xml @@ -108,11 +108,3 @@ linkend="mmap">memory mapping</link> or <link linkend="userp">user pointer</link>) I/O. See <xref linkend="io" /> for details.</para> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml index 6e156dc45b94..dca0ecd54dc6 100644 --- a/Documentation/DocBook/media/v4l/dev-codec.xml +++ b/Documentation/DocBook/media/v4l/dev-codec.xml @@ -16,11 +16,3 @@ Applications send data to be converted to the driver through a I/O.</para> <para>[to do]</para> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-effect.xml b/Documentation/DocBook/media/v4l/dev-effect.xml index 9c243beba0e6..2350a67c0710 100644 --- a/Documentation/DocBook/media/v4l/dev-effect.xml +++ b/Documentation/DocBook/media/v4l/dev-effect.xml @@ -15,11 +15,3 @@ receive the result data either with &func-read; and &func-write; functions, or through the streaming I/O mechanism.</para> <para>[to do]</para> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-event.xml b/Documentation/DocBook/media/v4l/dev-event.xml index f14ae3fe107c..19f4becfae34 100644 --- a/Documentation/DocBook/media/v4l/dev-event.xml +++ b/Documentation/DocBook/media/v4l/dev-event.xml @@ -41,11 +41,3 @@ intermediate step leading up to that information. See the documentation for the event you want to subscribe to whether this is applicable for that event or not.</para> </listitem> </orderedlist></para> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-osd.xml b/Documentation/DocBook/media/v4l/dev-osd.xml index c9a68a2ccd33..479d9433869a 100644 --- a/Documentation/DocBook/media/v4l/dev-osd.xml +++ b/Documentation/DocBook/media/v4l/dev-osd.xml @@ -154,11 +154,3 @@ data flow. For more information see <xref linkend="crop" />.</para> however the framebuffer interface of the driver may support the <constant>FBIOBLANK</constant> ioctl.</para> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-output.xml b/Documentation/DocBook/media/v4l/dev-output.xml index 919e22c53854..9130a3dc7880 100644 --- a/Documentation/DocBook/media/v4l/dev-output.xml +++ b/Documentation/DocBook/media/v4l/dev-output.xml @@ -104,11 +104,3 @@ linkend="mmap">memory mapping</link> or <link linkend="userp">user pointer</link>) I/O. See <xref linkend="io" /> for details.</para> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-overlay.xml b/Documentation/DocBook/media/v4l/dev-overlay.xml index 92513cf79150..40d1d7681439 100644 --- a/Documentation/DocBook/media/v4l/dev-overlay.xml +++ b/Documentation/DocBook/media/v4l/dev-overlay.xml @@ -369,11 +369,3 @@ reasons. <!-- video4linux-list@redhat.com on 22 Oct 2002 subject <para>To start or stop the frame buffer overlay applications call the &VIDIOC-OVERLAY; ioctl.</para> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-radio.xml b/Documentation/DocBook/media/v4l/dev-radio.xml index 73aa90b45b34..3e6ac73b36af 100644 --- a/Documentation/DocBook/media/v4l/dev-radio.xml +++ b/Documentation/DocBook/media/v4l/dev-radio.xml @@ -47,11 +47,3 @@ depending on the selected frequency. The &VIDIOC-G-TUNER; or &VIDIOC-G-MODULATOR; ioctl reports the supported frequency range.</para> </section> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml index c5a70bdfaf27..b788c72c885e 100644 --- a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml +++ b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml @@ -337,11 +337,3 @@ an &EBUSY; if the required hardware resources are temporarily unavailable, for example the device is already in use by another process.</para> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-rds.xml b/Documentation/DocBook/media/v4l/dev-rds.xml index 2427f54397e7..38883a419e65 100644 --- a/Documentation/DocBook/media/v4l/dev-rds.xml +++ b/Documentation/DocBook/media/v4l/dev-rds.xml @@ -29,10 +29,10 @@ returned by the &VIDIOC-QUERYCAP; ioctl. Any tuner that supports RDS will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield> field of &v4l2-tuner;. If the driver only passes RDS blocks without interpreting the data -the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be +the <constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant> flag has to be set, see <link linkend="reading-rds-data">Reading RDS data</link>. For future use the -flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> has also been +flag <constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant> has also been defined. However, a driver for a radio tuner with this capability does not yet exist, so if you are planning to write such a driver you should discuss this on the linux-media mailing list: &v4l-ml;.</para> @@ -52,9 +52,9 @@ field of &v4l2-modulator;. In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant> bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;. If the driver only passes RDS blocks without interpreting the data -the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the +the <constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant> flag has to be set. If the tuner is capable of handling RDS entities like program identification codes and radio -text, the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set, +text, the flag <constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant> should be set, see <link linkend="writing-rds-data">Writing RDS data</link> and <link linkend="fm-tx-controls">FM Transmitter Control Reference</link>.</para> </section> @@ -194,11 +194,3 @@ as follows:</para> </tgroup> </table> </section> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml index 69e789fa7f7b..548f8ea28dee 100644 --- a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml +++ b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml @@ -697,12 +697,3 @@ Sliced VBI services</link> for a description of the line payload.</entry> </section> </section> - - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/dev-teletext.xml b/Documentation/DocBook/media/v4l/dev-teletext.xml index 414b1cfff9f4..bd21c64d70f3 100644 --- a/Documentation/DocBook/media/v4l/dev-teletext.xml +++ b/Documentation/DocBook/media/v4l/dev-teletext.xml @@ -27,11 +27,3 @@ kernel 2.6.37.</para> <para>Modern devices all use the <link linkend="raw-vbi">raw</link> or <link linkend="sliced">sliced</link> VBI API.</para> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/driver.xml b/Documentation/DocBook/media/v4l/driver.xml index 1f7eea5c4ec3..eacafe312cd2 100644 --- a/Documentation/DocBook/media/v4l/driver.xml +++ b/Documentation/DocBook/media/v4l/driver.xml @@ -198,11 +198,3 @@ devices with the videodev module.</para> <para>to do</para> </section> --> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-close.xml b/Documentation/DocBook/media/v4l/func-close.xml index dfb41cbbbec3..232920d2f3c6 100644 --- a/Documentation/DocBook/media/v4l/func-close.xml +++ b/Documentation/DocBook/media/v4l/func-close.xml @@ -60,11 +60,3 @@ descriptor.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-ioctl.xml b/Documentation/DocBook/media/v4l/func-ioctl.xml index 2de64be706f5..4394184a1a6d 100644 --- a/Documentation/DocBook/media/v4l/func-ioctl.xml +++ b/Documentation/DocBook/media/v4l/func-ioctl.xml @@ -69,11 +69,3 @@ their respective function and parameters are specified in <xref the parameter remains unmodified.</para> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-mmap.xml b/Documentation/DocBook/media/v4l/func-mmap.xml index 786732b64bbd..f31ad71bf301 100644 --- a/Documentation/DocBook/media/v4l/func-mmap.xml +++ b/Documentation/DocBook/media/v4l/func-mmap.xml @@ -181,11 +181,3 @@ complete the request.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-munmap.xml b/Documentation/DocBook/media/v4l/func-munmap.xml index e2c4190f9bb6..860d49ca54a5 100644 --- a/Documentation/DocBook/media/v4l/func-munmap.xml +++ b/Documentation/DocBook/media/v4l/func-munmap.xml @@ -74,11 +74,3 @@ mapped yet.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-open.xml b/Documentation/DocBook/media/v4l/func-open.xml index 7595d07a8c72..cf64e207c3ee 100644 --- a/Documentation/DocBook/media/v4l/func-open.xml +++ b/Documentation/DocBook/media/v4l/func-open.xml @@ -111,11 +111,3 @@ system has been reached.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-poll.xml b/Documentation/DocBook/media/v4l/func-poll.xml index ec3c718f5963..85cad8bff5ba 100644 --- a/Documentation/DocBook/media/v4l/func-poll.xml +++ b/Documentation/DocBook/media/v4l/func-poll.xml @@ -117,11 +117,3 @@ than <constant>OPEN_MAX</constant>.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-read.xml b/Documentation/DocBook/media/v4l/func-read.xml index a5089bf8873d..e218bbfbd362 100644 --- a/Documentation/DocBook/media/v4l/func-read.xml +++ b/Documentation/DocBook/media/v4l/func-read.xml @@ -179,11 +179,3 @@ type of device.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-select.xml b/Documentation/DocBook/media/v4l/func-select.xml index b6713623181f..e12a60d9bd85 100644 --- a/Documentation/DocBook/media/v4l/func-select.xml +++ b/Documentation/DocBook/media/v4l/func-select.xml @@ -128,11 +128,3 @@ zero or greater than <constant>FD_SETSIZE</constant>.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/func-write.xml b/Documentation/DocBook/media/v4l/func-write.xml index 2c09c09371c3..575207885726 100644 --- a/Documentation/DocBook/media/v4l/func-write.xml +++ b/Documentation/DocBook/media/v4l/func-write.xml @@ -126,11 +126,3 @@ type of device.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index 3f47df1aa54a..b815929b5bba 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -1282,11 +1282,3 @@ line, top field first. The bottom field is transmitted first.</entry> </mediaobject> </figure> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/libv4l.xml b/Documentation/DocBook/media/v4l/libv4l.xml index 3cb10ec51929..d3b71e20003c 100644 --- a/Documentation/DocBook/media/v4l/libv4l.xml +++ b/Documentation/DocBook/media/v4l/libv4l.xml @@ -158,10 +158,3 @@ still don't use libv4l.</para> </section> </section> -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/pixfmt-grey.xml b/Documentation/DocBook/media/v4l/pixfmt-grey.xml index 3b72bc6b2de7..bee970d3f76d 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-grey.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-grey.xml @@ -60,11 +60,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-m420.xml b/Documentation/DocBook/media/v4l/pixfmt-m420.xml index ce4bc019e5c0..aadae92c5d04 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-m420.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-m420.xml @@ -137,11 +137,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml index 873f67035181..84dd4fd7cb80 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml @@ -141,11 +141,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml index c9e166d9ded8..3fd3ce5df270 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml @@ -144,11 +144,3 @@ CbCr plane has as many pad bytes after its rows.</para> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml index 7a2855a526c1..2f82b1da8dfe 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml @@ -64,11 +64,3 @@ layout of macroblocks</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv16.xml b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml index 26094035fc04..8ae1f8a810d0 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv16.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml @@ -164,11 +164,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv24.xml b/Documentation/DocBook/media/v4l/pixfmt-nv24.xml new file mode 100644 index 000000000000..fb255f2ca9dd --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-nv24.xml @@ -0,0 +1,121 @@ + <refentry> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_NV24 ('NV24'), V4L2_PIX_FMT_NV42 ('NV42')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname id="V4L2-PIX-FMT-NV24"><constant>V4L2_PIX_FMT_NV24</constant></refname> + <refname id="V4L2-PIX-FMT-NV42"><constant>V4L2_PIX_FMT_NV42</constant></refname> + <refpurpose>Formats with full horizontal and vertical +chroma resolutions, also known as YUV 4:4:4. One luminance and one +chrominance plane with alternating chroma samples as opposed to +<constant>V4L2_PIX_FMT_YVU420</constant></refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>These are two-plane versions of the YUV 4:4:4 format. The three + components are separated into two sub-images or planes. The Y plane is + first, with each Y sample stored in one byte per pixel. For + <constant>V4L2_PIX_FMT_NV24</constant>, a combined CbCr plane + immediately follows the Y plane in memory. The CbCr plane has the same + width and height, in pixels, as the Y plane (and the image). Each line + contains one CbCr pair per pixel, with each Cb and Cr sample stored in + one byte. <constant>V4L2_PIX_FMT_NV42</constant> is the same except that + the Cb and Cr samples are swapped, the CrCb plane starts with a Cr + sample.</para> + + <para>If the Y plane has pad bytes after each row, then the CbCr plane + has twice as many pad bytes after its rows.</para> + + <example> + <title><constant>V4L2_PIX_FMT_NV24</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="9" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>Y'<subscript>00</subscript></entry> + <entry>Y'<subscript>01</subscript></entry> + <entry>Y'<subscript>02</subscript></entry> + <entry>Y'<subscript>03</subscript></entry> + </row> + <row> + <entry>start + 4:</entry> + <entry>Y'<subscript>10</subscript></entry> + <entry>Y'<subscript>11</subscript></entry> + <entry>Y'<subscript>12</subscript></entry> + <entry>Y'<subscript>13</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>Y'<subscript>20</subscript></entry> + <entry>Y'<subscript>21</subscript></entry> + <entry>Y'<subscript>22</subscript></entry> + <entry>Y'<subscript>23</subscript></entry> + </row> + <row> + <entry>start + 12:</entry> + <entry>Y'<subscript>30</subscript></entry> + <entry>Y'<subscript>31</subscript></entry> + <entry>Y'<subscript>32</subscript></entry> + <entry>Y'<subscript>33</subscript></entry> + </row> + <row> + <entry>start + 16:</entry> + <entry>Cb<subscript>00</subscript></entry> + <entry>Cr<subscript>00</subscript></entry> + <entry>Cb<subscript>01</subscript></entry> + <entry>Cr<subscript>01</subscript></entry> + <entry>Cb<subscript>02</subscript></entry> + <entry>Cr<subscript>02</subscript></entry> + <entry>Cb<subscript>03</subscript></entry> + <entry>Cr<subscript>03</subscript></entry> + </row> + <row> + <entry>start + 24:</entry> + <entry>Cb<subscript>10</subscript></entry> + <entry>Cr<subscript>10</subscript></entry> + <entry>Cb<subscript>11</subscript></entry> + <entry>Cr<subscript>11</subscript></entry> + <entry>Cb<subscript>12</subscript></entry> + <entry>Cr<subscript>12</subscript></entry> + <entry>Cb<subscript>13</subscript></entry> + <entry>Cr<subscript>13</subscript></entry> + </row> + <row> + <entry>start + 32:</entry> + <entry>Cb<subscript>20</subscript></entry> + <entry>Cr<subscript>20</subscript></entry> + <entry>Cb<subscript>21</subscript></entry> + <entry>Cr<subscript>21</subscript></entry> + <entry>Cb<subscript>22</subscript></entry> + <entry>Cr<subscript>22</subscript></entry> + <entry>Cb<subscript>23</subscript></entry> + <entry>Cr<subscript>23</subscript></entry> + </row> + <row> + <entry>start + 40:</entry> + <entry>Cb<subscript>30</subscript></entry> + <entry>Cr<subscript>30</subscript></entry> + <entry>Cb<subscript>31</subscript></entry> + <entry>Cr<subscript>31</subscript></entry> + <entry>Cb<subscript>32</subscript></entry> + <entry>Cr<subscript>32</subscript></entry> + <entry>Cb<subscript>33</subscript></entry> + <entry>Cr<subscript>33</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> + </refentry> diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml index 4db272b8a0d3..166c8d65e4f7 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml @@ -428,8 +428,11 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para> <para>Bit 7 is the most significant bit. The value of a = alpha bits is undefined when reading from the driver, ignored when writing to the driver, except when alpha blending has been negotiated for a -<link linkend="overlay">Video Overlay</link> or <link -linkend="osd">Video Output Overlay</link>.</para> +<link linkend="overlay">Video Overlay</link> or <link linkend="osd"> +Video Output Overlay</link> or when alpha component has been configured +for a <link linkend="capture">Video Capture</link> by means of <link +linkend="v4l2-alpha-component"> <constant>V4L2_CID_ALPHA_COMPONENT +</constant> </link> control.</para> <example> <title><constant>V4L2_PIX_FMT_BGR24</constant> 4 × 4 pixel @@ -930,11 +933,3 @@ See &v4l-dvb; for access instructions.</para> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml index 3cab5d0ca75d..33fa5a47a865 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml @@ -234,11 +234,3 @@ linkend="osd">Video Output Overlay</link>.</para> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml index 519a9efbac10..6494b05d84a1 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml @@ -81,11 +81,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml index 5fe84ecc2ebe..5eaf2b42d3f7 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml @@ -65,11 +65,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml index d67a472b0880..fee65dca79c5 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml @@ -65,11 +65,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml index 0cdf13b8ac1c..19727ab4c757 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml @@ -65,11 +65,3 @@ columns and rows.</para> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml index 816c8d467c16..b1f6801a17ff 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml @@ -118,11 +118,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml index 61f12a5e68d9..82803408b389 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml @@ -118,11 +118,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-y16.xml b/Documentation/DocBook/media/v4l/pixfmt-y16.xml index d58404015078..ff4f727d5624 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-y16.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-y16.xml @@ -79,11 +79,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-y41p.xml b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml index 73c8536efb05..98dcb91d2917 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-y41p.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml @@ -147,11 +147,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml index 8eb4a193d770..0869dce5f92c 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml @@ -131,11 +131,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml index 00e0960a9869..086dc731bf02 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml @@ -145,11 +145,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml index 42d7de5e456d..48649fac1596 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml @@ -147,11 +147,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml index f5d8f57495c8..9957863daf18 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml @@ -152,11 +152,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml index 4348bd9f0d01..4ce6463fe0a5 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml @@ -151,11 +151,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml index bdb2ffacbbcc..58384092251a 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml @@ -118,11 +118,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml index 40d17ae39dde..bfffdc76d3da 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml @@ -118,11 +118,3 @@ pixel image</title> </example> </refsect1> </refentry> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "pixfmt.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index 2ff6b7776d7f..31eaae2469f9 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -714,6 +714,7 @@ information.</para> &sub-nv12m; &sub-nv12mt; &sub-nv16; + &sub-nv24; &sub-m420; </section> @@ -890,6 +891,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm <entry>'M310'</entry> <entry>Compressed BGGR Bayer format used by the gspca driver.</entry> </row> + <row id="V4L2-PIX-FMT-JL2005BCD"> + <entry><constant>V4L2_PIX_FMT_JL2005BCD</constant></entry> + <entry>'JL20'</entry> + <entry>JPEG compressed RGGB Bayer format used by the gspca driver.</entry> + </row> <row id="V4L2-PIX-FMT-OV511"> <entry><constant>V4L2_PIX_FMT_OV511</constant></entry> <entry>'O511'</entry> @@ -997,11 +1003,3 @@ the other bits are set to 0.</entry> </tgroup> </table> </section> - - <!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: - --> diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml new file mode 100644 index 000000000000..2f0bdb4d5551 --- /dev/null +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -0,0 +1,321 @@ +<section id="selection-api"> + + <title>Experimental API for cropping, composing and scaling</title> + + <note> + <title>Experimental</title> + + <para>This is an <link linkend="experimental">experimental</link> +interface and may change in the future.</para> + </note> + + <section> + <title>Introduction</title> + +<para>Some video capture devices can sample a subsection of a picture and +shrink or enlarge it to an image of arbitrary size. Next, the devices can +insert the image into larger one. Some video output devices can crop part of an +input image, scale it up or down and insert it at an arbitrary scan line and +horizontal offset into a video signal. We call these abilities cropping, +scaling and composing.</para> + +<para>On a video <emphasis>capture</emphasis> device the source is a video +signal, and the cropping target determine the area actually sampled. The sink +is an image stored in a memory buffer. The composing area specifies which part +of the buffer is actually written to by the hardware. </para> + +<para>On a video <emphasis>output</emphasis> device the source is an image in a +memory buffer, and the cropping target is a part of an image to be shown on a +display. The sink is the display or the graphics screen. The application may +select the part of display where the image should be displayed. The size and +position of such a window is controlled by the compose target.</para> + +<para>Rectangles for all cropping and composing targets are defined even if the +device does supports neither cropping nor composing. Their size and position +will be fixed in such a case. If the device does not support scaling then the +cropping and composing rectangles have the same size.</para> + + </section> + + <section> + <title>Selection targets</title> + + <figure id="sel-targets-capture"> + <title>Cropping and composing targets</title> + <mediaobject> + <imageobject> + <imagedata fileref="selection.png" format="PNG" /> + </imageobject> + <textobject> + <phrase>Targets used by a cropping, composing and scaling + process</phrase> + </textobject> + </mediaobject> + </figure> + </section> + + <section> + + <title>Configuration</title> + +<para>Applications can use the <link linkend="vidioc-g-selection">selection +API</link> to select an area in a video signal or a buffer, and to query for +default settings and hardware limits.</para> + +<para>Video hardware can have various cropping, composing and scaling +limitations. It may only scale up or down, support only discrete scaling +factors, or have different scaling abilities in the horizontal and vertical +directions. Also it may not support scaling at all. At the same time the +cropping/composing rectangles may have to be aligned, and both the source and +the sink may have arbitrary upper and lower size limits. Therefore, as usual, +drivers are expected to adjust the requested parameters and return the actual +values selected. An application can control the rounding behaviour using <link +linkend="v4l2-sel-flags"> constraint flags </link>.</para> + + <section> + + <title>Configuration of video capture</title> + +<para>See figure <xref linkend="sel-targets-capture" /> for examples of the +selection targets available for a video capture device. It is recommended to +configure the cropping targets before to the composing targets.</para> + +<para>The range of coordinates of the top left corner, width and height of +areas that can be sampled is given by the <constant> V4L2_SEL_TGT_CROP_BOUNDS +</constant> target. It is recommended for the driver developers to put the +top/left corner at position <constant> (0,0) </constant>. The rectangle's +coordinates are expressed in pixels.</para> + +<para>The top left corner, width and height of the source rectangle, that is +the area actually sampled, is given by the <constant> V4L2_SEL_TGT_CROP_ACTIVE +</constant> target. It uses the same coordinate system as <constant> +V4L2_SEL_TGT_CROP_BOUNDS </constant>. The active cropping area must lie +completely inside the capture boundaries. The driver may further adjust the +requested size and/or position according to hardware limitations.</para> + +<para>Each capture device has a default source rectangle, given by the +<constant> V4L2_SEL_TGT_CROP_DEFAULT </constant> target. This rectangle shall +over what the driver writer considers the complete picture. Drivers shall set +the active crop rectangle to the default when the driver is first loaded, but +not later.</para> + +<para>The composing targets refer to a memory buffer. The limits of composing +coordinates are obtained using <constant> V4L2_SEL_TGT_COMPOSE_BOUNDS +</constant>. All coordinates are expressed in pixels. The rectangle's top/left +corner must be located at position <constant> (0,0) </constant>. The width and +height are equal to the image size set by <constant> VIDIOC_S_FMT </constant>. +</para> + +<para>The part of a buffer into which the image is inserted by the hardware is +controlled by the <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target. +The rectangle's coordinates are also expressed in the same coordinate system as +the bounds rectangle. The composing rectangle must lie completely inside bounds +rectangle. The driver must adjust the composing rectangle to fit to the +bounding limits. Moreover, the driver can perform other adjustments according +to hardware limitations. The application can control rounding behaviour using +<link linkend="v4l2-sel-flags"> constraint flags </link>.</para> + +<para>For capture devices the default composing rectangle is queried using +<constant> V4L2_SEL_TGT_COMPOSE_DEFAULT </constant>. It is usually equal to the +bounding rectangle.</para> + +<para>The part of a buffer that is modified by the hardware is given by +<constant> V4L2_SEL_TGT_COMPOSE_PADDED </constant>. It contains all pixels +defined using <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> plus all +padding data modified by hardware during insertion process. All pixels outside +this rectangle <emphasis>must not</emphasis> be changed by the hardware. The +content of pixels that lie inside the padded area but outside active area is +undefined. The application can use the padded and active rectangles to detect +where the rubbish pixels are located and remove them if needed.</para> + + </section> + + <section> + + <title>Configuration of video output</title> + +<para>For output devices targets and ioctls are used similarly to the video +capture case. The <emphasis> composing </emphasis> rectangle refers to the +insertion of an image into a video signal. The cropping rectangles refer to a +memory buffer. It is recommended to configure the composing targets before to +the cropping targets.</para> + +<para>The cropping targets refer to the memory buffer that contains an image to +be inserted into a video signal or graphical screen. The limits of cropping +coordinates are obtained using <constant> V4L2_SEL_TGT_CROP_BOUNDS </constant>. +All coordinates are expressed in pixels. The top/left corner is always point +<constant> (0,0) </constant>. The width and height is equal to the image size +specified using <constant> VIDIOC_S_FMT </constant> ioctl.</para> + +<para>The top left corner, width and height of the source rectangle, that is +the area from which image date are processed by the hardware, is given by the +<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant>. Its coordinates are expressed +in in the same coordinate system as the bounds rectangle. The active cropping +area must lie completely inside the crop boundaries and the driver may further +adjust the requested size and/or position according to hardware +limitations.</para> + +<para>For output devices the default cropping rectangle is queried using +<constant> V4L2_SEL_TGT_CROP_DEFAULT </constant>. It is usually equal to the +bounding rectangle.</para> + +<para>The part of a video signal or graphics display where the image is +inserted by the hardware is controlled by <constant> +V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target. The rectangle's coordinates +are expressed in pixels. The composing rectangle must lie completely inside the +bounds rectangle. The driver must adjust the area to fit to the bounding +limits. Moreover, the driver can perform other adjustments according to +hardware limitations. </para> + +<para>The device has a default composing rectangle, given by the <constant> +V4L2_SEL_TGT_COMPOSE_DEFAULT </constant> target. This rectangle shall cover what +the driver writer considers the complete picture. It is recommended for the +driver developers to put the top/left corner at position <constant> (0,0) +</constant>. Drivers shall set the active composing rectangle to the default +one when the driver is first loaded.</para> + +<para>The devices may introduce additional content to video signal other than +an image from memory buffers. It includes borders around an image. However, +such a padded area is driver-dependent feature not covered by this document. +Driver developers are encouraged to keep padded rectangle equal to active one. +The padded target is accessed by the <constant> V4L2_SEL_TGT_COMPOSE_PADDED +</constant> identifier. It must contain all pixels from the <constant> +V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para> + + </section> + + <section> + + <title>Scaling control.</title> + +<para>An application can detect if scaling is performed by comparing the width +and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP_ACTIVE +</constant> and <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> targets. If +these are not equal then the scaling is applied. The application can compute +the scaling ratios using these values.</para> + + </section> + + </section> + + <section> + + <title>Comparison with old cropping API.</title> + +<para>The selection API was introduced to cope with deficiencies of previous +<link linkend="crop"> API </link>, that was designed to control simple capture +devices. Later the cropping API was adopted by video output drivers. The ioctls +are used to select a part of the display were the video signal is inserted. It +should be considered as an API abuse because the described operation is +actually the composing. The selection API makes a clear distinction between +composing and cropping operations by setting the appropriate targets. The V4L2 +API lacks any support for composing to and cropping from an image inside a +memory buffer. The application could configure a capture device to fill only a +part of an image by abusing V4L2 API. Cropping a smaller image from a larger +one is achieved by setting the field <structfield> +&v4l2-pix-format;::bytesperline </structfield>. Introducing an image offsets +could be done by modifying field <structfield> &v4l2-buffer;::m:userptr +</structfield> before calling <constant> VIDIOC_QBUF </constant>. Those +operations should be avoided because they are not portable (endianness), and do +not work for macroblock and Bayer formats and mmap buffers. The selection API +deals with configuration of buffer cropping/composing in a clear, intuitive and +portable way. Next, with the selection API the concepts of the padded target +and constraints flags are introduced. Finally, <structname> &v4l2-crop; +</structname> and <structname> &v4l2-cropcap; </structname> have no reserved +fields. Therefore there is no way to extend their functionality. The new +<structname> &v4l2-selection; </structname> provides a lot of place for future +extensions. Driver developers are encouraged to implement only selection API. +The former cropping API would be simulated using the new one. </para> + + </section> + + <section> + <title>Examples</title> + <example> + <title>Resetting the cropping parameters</title> + + <para>(A video capture device is assumed; change <constant> +V4L2_BUF_TYPE_VIDEO_CAPTURE </constant> for other devices; change target to +<constant> V4L2_SEL_TGT_COMPOSE_* </constant> family to configure composing +area)</para> + + <programlisting> + + &v4l2-selection; sel = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .target = V4L2_SEL_TGT_CROP_DEFAULT, + }; + ret = ioctl(fd, &VIDIOC-G-SELECTION;, &sel); + if (ret) + exit(-1); + sel.target = V4L2_SEL_TGT_CROP_ACTIVE; + ret = ioctl(fd, &VIDIOC-S-SELECTION;, &sel); + if (ret) + exit(-1); + + </programlisting> + </example> + + <example> + <title>Simple downscaling</title> + <para>Setting a composing area on output of size of <emphasis> at most +</emphasis> half of limit placed at a center of a display.</para> + <programlisting> + + &v4l2-selection; sel = { + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT, + .target = V4L2_SEL_TGT_COMPOSE_BOUNDS, + }; + struct v4l2_rect r; + + ret = ioctl(fd, &VIDIOC-G-SELECTION;, &sel); + if (ret) + exit(-1); + /* setting smaller compose rectangle */ + r.width = sel.r.width / 2; + r.height = sel.r.height / 2; + r.left = sel.r.width / 4; + r.top = sel.r.height / 4; + sel.r = r; + sel.target = V4L2_SEL_TGT_COMPOSE_ACTIVE; + sel.flags = V4L2_SEL_FLAG_LE; + ret = ioctl(fd, &VIDIOC-S-SELECTION;, &sel); + if (ret) + exit(-1); + + </programlisting> + </example> + + <example> + <title>Querying for scaling factors</title> + <para>A video output device is assumed; change <constant> +V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> for other devices</para> + <programlisting> + + &v4l2-selection; compose = { + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT, + .target = V4L2_SEL_TGT_COMPOSE_ACTIVE, + }; + &v4l2-selection; crop = { + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT, + .target = V4L2_SEL_TGT_CROP_ACTIVE, + }; + double hscale, vscale; + + ret = ioctl(fd, &VIDIOC-G-SELECTION;, &compose); + if (ret) + exit(-1); + ret = ioctl(fd, &VIDIOC-G-SELECTION;, &crop); + if (ret) + exit(-1); + + /* computing scaling factors */ + hscale = (double)compose.r.width / crop.r.width; + vscale = (double)compose.r.height / crop.r.height; + + </programlisting> + </example> + + </section> + +</section> diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 2ab365c10fb9..e97c512861bb 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -501,6 +501,7 @@ and discussions on the V4L mailing list.</revremark> &sub-g-output; &sub-g-parm; &sub-g-priority; + &sub-g-selection; &sub-g-sliced-vbi-cap; &sub-g-std; &sub-g-tuner; diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml index 1d31427edd1b..0be17c232d3a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml @@ -228,11 +228,3 @@ is out of bounds.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml index 71d373b6d36a..347d142e7431 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml @@ -156,11 +156,3 @@ bounds.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml index 476fe1d2bba0..9b8efcd6e947 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml @@ -311,11 +311,3 @@ out of bounds.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml index a281d26a195f..a64d5ef103fa 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml @@ -196,11 +196,3 @@ is out of bounds.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml index 95803fe2c8e4..3a5fc5405f96 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml @@ -381,11 +381,3 @@ is out of bounds.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml index 5146d00782e3..12b1d0503e26 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml @@ -127,11 +127,3 @@ this control belongs to.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index 5122ce87e0b8..6f1f9a629dc3 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -312,10 +312,3 @@ to store the payload and this error code is returned.</para> </refsect1> </refentry> -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml index 055718231bc1..93817f337033 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml @@ -295,7 +295,8 @@ set this field to zero.</entry> <entry>The device is capable of non-destructive overlays. When the driver clears this flag, only destructive overlays are supported. There are no drivers yet which support both destructive and -non-destructive overlays.</entry> +non-destructive overlays. Video Output Overlays are in practice always +non-destructive.</entry> </row> <row> <entry><constant>V4L2_FBUF_CAP_CHROMAKEY</constant></entry> @@ -339,8 +340,8 @@ blending makes no sense for destructive overlays.</entry> <row> <entry><constant>V4L2_FBUF_CAP_SRC_CHROMAKEY</constant></entry> <entry>0x0080</entry> - <entry>The device supports Source Chroma-keying. Framebuffer pixels -with the chroma-key colors are replaced by video pixels, which is exactly opposite of + <entry>The device supports Source Chroma-keying. Video pixels +with the chroma-key colors are replaced by framebuffer pixels, which is exactly opposite of <constant>V4L2_FBUF_CAP_CHROMAKEY</constant></entry> </row> </tbody> @@ -356,7 +357,9 @@ with the chroma-key colors are replaced by video pixels, which is exactly opposi <entry><constant>V4L2_FBUF_FLAG_PRIMARY</constant></entry> <entry>0x0001</entry> <entry>The framebuffer is the primary graphics surface. -In other words, the overlay is destructive. [?]</entry> +In other words, the overlay is destructive. This flag is typically set by any +driver that doesn't have the <constant>V4L2_FBUF_CAP_EXTERNOVERLAY</constant> +capability and it is cleared otherwise.</entry> </row> <row> <entry><constant>V4L2_FBUF_FLAG_OVERLAY</constant></entry> @@ -366,9 +369,8 @@ size as the capture. [?]</entry> </row> <row> <entry spanname="hspan">The purpose of -<constant>V4L2_FBUF_FLAG_PRIMARY</constant> and <constant>V4L2_FBUF_FLAG_OVERLAY</constant> was never quite clear. -Most drivers seem to ignore these flags. For compatibility with the +Most drivers seem to ignore this flag. For compatibility with the <wordasword>bttv</wordasword> driver applications should set the <constant>V4L2_FBUF_FLAG_OVERLAY</constant> flag.</entry> </row> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml index 062d72069090..16431813bebd 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml @@ -135,11 +135,3 @@ wrong.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml index 15ce660f0f5a..7f4ac7e41fa8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml @@ -236,11 +236,3 @@ mode.</entry> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-priority.xml b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml index 8f5e3da7002f..6a81b4fe9538 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-priority.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml @@ -133,11 +133,3 @@ priority.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml new file mode 100644 index 000000000000..a9d36e0c090e --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -0,0 +1,304 @@ +<refentry id="vidioc-g-selection"> + + <refmeta> + <refentrytitle>ioctl VIDIOC_G_SELECTION, VIDIOC_S_SELECTION</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>VIDIOC_G_SELECTION</refname> + <refname>VIDIOC_S_SELECTION</refname> + <refpurpose>Get or set one of the selection rectangles</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct v4l2_selection *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>VIDIOC_G_SELECTION, VIDIOC_S_SELECTION</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <note> + <title>Experimental</title> + <para>This is an <link linkend="experimental"> experimental </link> + interface and may change in the future.</para> + </note> + + <para>The ioctls are used to query and configure selection rectangles.</para> + +<para> To query the cropping (composing) rectangle set <structfield> +&v4l2-selection;::type </structfield> to the respective buffer type. Do not +use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE +</constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE +</constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of +<constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is +setting <structfield> &v4l2-selection;::target </structfield> to value +<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> +V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref +linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional +targets. Fields <structfield> &v4l2-selection;::flags </structfield> and +<structfield> &v4l2-selection;::reserved </structfield> are ignored and they +must be filled with zeros. The driver fills the rest of the structure or +returns &EINVAL; if incorrect buffer type or target was used. If cropping +(composing) is not supported then the active rectangle is not mutable and it is +always equal to the bounds rectangle. Finally, structure <structfield> +&v4l2-selection;::r </structfield> is filled with the current cropping +(composing) coordinates. The coordinates are expressed in driver-dependent +units. The only exception are rectangles for images in raw formats, whose +coordinates are always expressed in pixels. </para> + +<para> To change the cropping (composing) rectangle set <structfield> +&v4l2-selection;::type </structfield> to the respective buffer type. Do not +use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE +</constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE +</constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of +<constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is +setting <structfield> &v4l2-selection;::target </structfield> to value +<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant> +V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref +linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional +targets. Set desired active area into the field <structfield> +&v4l2-selection;::r </structfield>. Field <structfield> +&v4l2-selection;::reserved </structfield> is ignored and must be filled with +zeros. The driver may adjust the rectangle coordinates. An application may +introduce constraints to control rounding behaviour. Set the field +<structfield> &v4l2-selection;::flags </structfield> to one of values: + +<itemizedlist> + <listitem> +<para><constant>0</constant> - The driver can adjust the rectangle size freely +and shall choose a crop/compose rectangle as close as possible to the requested +one.</para> + </listitem> + <listitem> +<para><constant>V4L2_SEL_FLAG_GE</constant> - The driver is not allowed to +shrink the rectangle. The original rectangle must lay inside the adjusted +one.</para> + </listitem> + <listitem> +<para><constant>V4L2_SEL_FLAG_LE</constant> - The driver is not allowed to +enlarge the rectangle. The adjusted rectangle must lay inside the original +one.</para> + </listitem> + <listitem> +<para><constant>V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE</constant> - The driver +must choose the size exactly the same as in the requested rectangle.</para> + </listitem> +</itemizedlist> + +Please refer to <xref linkend="sel-const-adjust" />. + +</para> + +<para> The driver may have to adjusts the requested dimensions against hardware +limits and other parts as the pipeline, i.e. the bounds given by the +capture/output window or TV display. The closest possible values of horizontal +and vertical offset and sizes are chosen according to following priority: + +<orderedlist> + <listitem> + <para>Satisfy constraints from <structfield>&v4l2-selection;::flags</structfield>.</para> + </listitem> + <listitem> + <para>Adjust width, height, left, and top to hardware limits and alignments.</para> + </listitem> + <listitem> + <para>Keep center of adjusted rectangle as close as possible to the original one.</para> + </listitem> + <listitem> + <para>Keep width and height as close as possible to original ones.</para> + </listitem> + <listitem> + <para>Keep horizontal and vertical offset as close as possible to original ones.</para> + </listitem> +</orderedlist> + +On success the field <structfield> &v4l2-selection;::r </structfield> contains +the adjusted rectangle. When the parameters are unsuitable the application may +modify the cropping (composing) or image parameters and repeat the cycle until +satisfactory parameters have been negotiated. If constraints flags have to be +violated at then ERANGE is returned. The error indicates that <emphasis> there +exist no rectangle </emphasis> that satisfies the constraints.</para> + + </refsect1> + + <refsect1> + <table frame="none" pgwide="1" id="v4l2-sel-target"> + <title>Selection targets.</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>V4L2_SEL_TGT_CROP_ACTIVE</constant></entry> + <entry>0</entry> + <entry>area that is currently cropped by hardware</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry> + <entry>1</entry> + <entry>suggested cropping rectangle that covers the "whole picture"</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry> + <entry>2</entry> + <entry>limits for the cropping rectangle</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_COMPOSE_ACTIVE</constant></entry> + <entry>256</entry> + <entry>area to which data are composed by hardware</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry> + <entry>257</entry> + <entry>suggested composing rectangle that covers the "whole picture"</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry> + <entry>258</entry> + <entry>limits for the composing rectangle</entry> + </row> + <row> + <entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry> + <entry>259</entry> + <entry>the active area and all padding pixels that are inserted or modified by the hardware</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + <table frame="none" pgwide="1" id="v4l2-sel-flags"> + <title>Selection constraint flags</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>V4L2_SEL_FLAG_GE</constant></entry> + <entry>0x00000001</entry> + <entry>indicate that adjusted rectangle must contain a rectangle from <structfield>&v4l2-selection;::r</structfield></entry> + </row> + <row> + <entry><constant>V4L2_SEL_FLAG_LE</constant></entry> + <entry>0x00000002</entry> + <entry>indicate that adjusted rectangle must be inside a rectangle from <structfield>&v4l2-selection;::r</structfield></entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <section> + <figure id="sel-const-adjust"> + <title>Size adjustments with constraint flags.</title> + <mediaobject> + <imageobject> + <imagedata fileref="constraints.png" format="PNG" /> + </imageobject> + <textobject> + <phrase>Behaviour of rectangle adjustment for different constraint + flags.</phrase> + </textobject> + </mediaobject> + </figure> + </section> + + <refsect1> + <table pgwide="1" frame="none" id="v4l2-selection"> + <title>struct <structname>v4l2_selection</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>type</structfield></entry> + <entry>Type of the buffer (from &v4l2-buf-type;)</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>target</structfield></entry> + <entry>used to select between <link linkend="v4l2-sel-target"> cropping and composing rectangles </link></entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>flags</structfield></entry> + <entry>control over coordinates adjustments, refer to <link linkend="v4l2-sel-flags">selection flags</link></entry> + </row> + <row> + <entry>&v4l2-rect;</entry> + <entry><structfield>r</structfield></entry> + <entry>selection rectangle</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved[9]</structfield></entry> + <entry>Reserved fields for future use</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + <variablelist> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The buffer <structfield> &v4l2-selection;::type </structfield> +or <structfield> &v4l2-selection;::target </structfield> is not supported, or +the <structfield> &v4l2-selection;::flags </structfield> are invalid.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ERANGE</errorcode></term> + <listitem> + <para>it is not possible to adjust a rectangle <structfield> +&v4l2-selection;::r </structfield> that satisfies all contraints from +<structfield> &v4l2-selection;::flags </structfield>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EBUSY</errorcode></term> + <listitem> + <para>it is not possible to apply change of selection rectangle at the moment. +Usually because streaming is in progress.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + +</refentry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-std.xml b/Documentation/DocBook/media/v4l/vidioc-g-std.xml index 37996f25b5d4..99ff1a016220 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-std.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-std.xml @@ -88,11 +88,3 @@ standards.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index bd98c734c06b..91ec2fb658f8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -318,6 +318,16 @@ standard.</para><!-- FIXME what if PAL+NTSC and Bi but not SAP? --></entry> <entry>RDS capture is supported. This capability is only valid for radio tuners.</entry> </row> + <row> + <entry><constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant></entry> + <entry>0x0100</entry> + <entry>The RDS data is passed as unparsed RDS blocks.</entry> + </row> + <row> + <entry><constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant></entry> + <entry>0x0200</entry> + <entry>The RDS data is parsed by the hardware and set via controls.</entry> + </row> </tbody> </tgroup> </table> @@ -525,11 +535,3 @@ out of bounds.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml index 5c104d42d31c..6e414d7b6df7 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml @@ -100,11 +100,3 @@ supported, or the <structfield>index</structfield> is out of bounds.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml index 0ac0057a51c4..36660d311b51 100644 --- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml @@ -443,11 +443,3 @@ or this particular menu item is not supported by the driver.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index c30dcc4232c0..e013da845b11 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -125,11 +125,3 @@ wrong.</para> </variablelist> </refsect1> </refentry> - -<!-- -Local Variables: -mode: sgml -sgml-parent-document: "v4l2.sgml" -indent-tabs-mode: nil -End: ---> diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index 54883de5d5f9..ac3d0018140c 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -521,6 +521,11 @@ Here's a description of the fields of <varname>struct uio_mem</varname>: <itemizedlist> <listitem><para> +<varname>const char *name</varname>: Optional. Set this to help identify +the memory region, it will show up in the corresponding sysfs node. +</para></listitem> + +<listitem><para> <varname>int memtype</varname>: Required if the mapping is used. Set this to <varname>UIO_MEM_PHYS</varname> if you you have physical memory on your card to be mapped. Use <varname>UIO_MEM_LOGICAL</varname> for logical @@ -553,7 +558,7 @@ instead to remember such an address. </itemizedlist> <para> -Please do not touch the <varname>kobj</varname> element of +Please do not touch the <varname>map</varname> element of <varname>struct uio_mem</varname>! It is used by the UIO framework to set up sysfs files for this mapping. Simply leave it alone. </para> diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl index 5de23c007078..cab4ec58e46e 100644 --- a/Documentation/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl @@ -404,7 +404,7 @@ /* SNDRV_CARDS: maximum number of cards supported by this module */ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; - static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* definition of the chip-specific record */ struct mychip { |
