aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/mips/Kconfig5
-rw-r--r--arch/mips/configs/ip22_defconfig1
-rw-r--r--arch/mips/configs/ip27_defconfig1
-rw-r--r--arch/mips/configs/ip28_defconfig2
-rw-r--r--arch/mips/include/asm/bitops.h114
-rw-r--r--arch/mips/include/asm/break.h1
-rw-r--r--arch/mips/include/asm/byteorder.h40
-rw-r--r--arch/mips/include/asm/cpu-features.h2
-rw-r--r--arch/mips/include/asm/ds1286.h15
-rw-r--r--arch/mips/include/asm/fpu_emulator.h17
-rw-r--r--arch/mips/include/asm/m48t35.h27
-rw-r--r--arch/mips/kernel/cpu-probe.c247
-rw-r--r--arch/mips/kernel/smp.c6
-rw-r--r--arch/mips/kernel/traps.c29
-rw-r--r--arch/mips/kernel/unaligned.c12
-rw-r--r--arch/mips/math-emu/cp1emu.c4
-rw-r--r--arch/mips/math-emu/dsemul.c7
-rw-r--r--arch/mips/math-emu/dsemul.h17
-rw-r--r--arch/mips/txx9/rbtx4927/setup.c25
-rw-r--r--arch/mips/txx9/rbtx4939/setup.c14
-rw-r--r--drivers/char/Kconfig22
-rw-r--r--drivers/char/Makefile2
-rw-r--r--drivers/char/ds1286.c585
-rw-r--r--drivers/char/ip27-rtc.c329
24 files changed, 281 insertions, 1243 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 653574bc19cf..f4af967a6b30 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -327,7 +327,6 @@ config SGI_IP22
select IP22_CPU_SCACHE
select IRQ_CPU
select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select SGI_HAS_DS1286
select SGI_HAS_I8042
select SGI_HAS_INDYDOG
select SGI_HAS_HAL2
@@ -382,7 +381,6 @@ config SGI_IP28
select HW_HAS_EISA
select I8253
select I8259
- select SGI_HAS_DS1286
select SGI_HAS_I8042
select SGI_HAS_INDYDOG
select SGI_HAS_HAL2
@@ -893,9 +891,6 @@ config EMMA2RH
config SERIAL_RM9000
bool
-config SGI_HAS_DS1286
- bool
-
config SGI_HAS_INDYDOG
bool
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index cc8e6bf2b245..f719bf5e01aa 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -771,7 +771,6 @@ CONFIG_WATCHDOG=y
CONFIG_INDYDOG=m
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-CONFIG_SGI_DS1286=m
# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 831d3e5a1ea6..34ea319be94c 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -701,7 +701,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_RTC is not set
-CONFIG_SGI_IP27_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index 822b01f643e3..70a744e9a8c5 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -70,7 +70,6 @@ CONFIG_CPU_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
-CONFIG_SGI_HAS_DS1286=y
CONFIG_SGI_HAS_INDYDOG=y
CONFIG_SGI_HAS_SEEQ=y
CONFIG_SGI_HAS_WD93=y
@@ -585,7 +584,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-CONFIG_SGI_DS1286=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 49df8c4c9d25..bac4a960b24c 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -558,39 +558,67 @@ static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *
__clear_bit(nr, addr);
}
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-
/*
* Return the bit position (0..63) of the most significant 1 bit in a word
* Returns -1 if no 1 bit exists
*/
-static inline unsigned long __fls(unsigned long x)
+static inline unsigned long __fls(unsigned long word)
{
- int lz;
+ int num;
- if (sizeof(x) == 4) {
+ if (BITS_PER_LONG == 32 &&
+ __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
__asm__(
" .set push \n"
" .set mips32 \n"
" clz %0, %1 \n"
" .set pop \n"
- : "=r" (lz)
- : "r" (x));
+ : "=r" (num)
+ : "r" (word));
- return 31 - lz;
+ return 31 - num;
}
- BUG_ON(sizeof(x) != 8);
+ if (BITS_PER_LONG == 64 &&
+ __builtin_constant_p(cpu_has_mips64) && cpu_has_mips64) {
+ __asm__(
+ " .set push \n"
+ " .set mips64 \n"
+ " dclz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (num)
+ : "r" (word));
- __asm__(
- " .set push \n"
- " .set mips64 \n"
- " dclz %0, %1 \n"
- " .set pop \n"
- : "=r" (lz)
- : "r" (x));
+ return 63 - num;
+ }
+
+ num = BITS_PER_LONG - 1;
- return 63 - lz;
+#if BITS_PER_LONG == 64
+ if (!(word & (~0ul << 32))) {
+ num -= 32;
+ word <<= 32;
+ }
+#endif
+ if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
+ num -= 16;
+ word <<= 16;
+ }
+ if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
+ num -= 8;
+ word <<= 8;
+ }
+ if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
+ num -= 4;
+ word <<= 4;
+ }
+ if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
+ num -= 2;
+ word <<= 2;
+ }
+ if (!(word & (~0ul << (BITS_PER_LONG-1))))
+ num -= 1;
+ return num;
}
/*
@@ -612,23 +640,43 @@ static inline unsigned long __ffs(unsigned long word)
* This is defined the same way as ffs.
* Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
*/
-static inline int fls(int word)
+static inline int fls(int x)
{
- __asm__("clz %0, %1" : "=r" (word) : "r" (word));
+ int r;
- return 32 - word;
-}
+ if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+ __asm__("clz %0, %1" : "=r" (x) : "r" (x));
-#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64)
-static inline int fls64(__u64 word)
-{
- __asm__("dclz %0, %1" : "=r" (word) : "r" (word));
+ return 32 - x;
+ }
- return 64 - word;
+ r = 32;
+ if (!x)
+ return 0;
+ if (!(x & 0xffff0000u)) {
+ x <<= 16;
+ r -= 16;
+ }
+ if (!(x & 0xff000000u)) {
+ x <<= 8;
+ r -= 8;
+ }
+ if (!(x & 0xf0000000u)) {
+ x <<= 4;
+ r -= 4;
+ }
+ if (!(x & 0xc0000000u)) {
+ x <<= 2;
+ r -= 2;
+ }
+ if (!(x & 0x80000000u)) {
+ x <<= 1;
+ r -= 1;
+ }
+ return r;
}
-#else
+
#include <asm-generic/bitops/fls64.h>
-#endif
/*
* ffs - find first bit set.
@@ -646,16 +694,6 @@ static inline int ffs(int word)
return fls(word & -word);
}
-#else
-
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */
-
#include <asm-generic/bitops/ffz.h>
#include <asm-generic/bitops/find.h>
diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h
index 25b980c91e7e..44437ed765e8 100644
--- a/arch/mips/include/asm/break.h
+++ b/arch/mips/include/asm/break.h
@@ -29,6 +29,7 @@
#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
#define BRK_BUG 512 /* Used by BUG() */
#define BRK_KDB 513 /* Used in KDB_ENTER() */
+#define BRK_MEMU 514 /* Used by FPU emulator */
#define BRK_MULOVF 1023 /* Multiply overflow */
#endif /* __ASM_BREAK_H */
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
index fe7dc2d59b69..2988d29a0867 100644
--- a/arch/mips/include/asm/byteorder.h
+++ b/arch/mips/include/asm/byteorder.h
@@ -11,11 +11,19 @@
#include <linux/compiler.h>
#include <asm/types.h>
-#ifdef __GNUC__
+#if defined(__MIPSEB__)
+# define __BIG_ENDIAN
+#elif defined(__MIPSEL__)
+# define __LITTLE_ENDIAN
+#else
+# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#define __SWAB_64_THRU_32__
#ifdef CONFIG_CPU_MIPSR2
-static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__(
" wsbh %0, %1 \n"
@@ -24,9 +32,9 @@ static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
return x;
}
-#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch_swab16 __arch_swab16
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__(
" wsbh %0, %1 \n"
@@ -36,11 +44,10 @@ static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
return x;
}
-#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch_swab32 __arch_swab32
#ifdef CONFIG_CPU_MIPS64_R2
-
-static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
" dsbh %0, %1 \n"
@@ -51,26 +58,11 @@ static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
return x;
}
-
-#define __arch__swab64(x) ___arch__swab64(x)
-
+#define __arch_swab64 __arch_swab64
#endif /* CONFIG_CPU_MIPS64_R2 */
#endif /* CONFIG_CPU_MIPSR2 */
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#if defined(__MIPSEB__)
-# include <linux/byteorder/big_endian.h>
-#elif defined(__MIPSEL__)
-# include <linux/byteorder/little_endian.h>
-#else
-# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
-#endif
+#include <linux/byteorder.h>
#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 5ea701fc3425..12d12dfe73c0 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -141,6 +141,8 @@
#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2)
#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1)
#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2)
+#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \
+ cpu_has_mips64r1 | cpu_has_mips64r2)
#ifndef cpu_has_dsp
#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
diff --git a/arch/mips/include/asm/ds1286.h b/arch/mips/include/asm/ds1286.h
deleted file mode 100644
index 6983b6ff0af3..000000000000
--- a/arch/mips/include/asm/ds1286.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Machine dependent access functions for RTC registers.
- *
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef _ASM_DS1286_H
-#define _ASM_DS1286_H
-
-#include <ds1286.h>
-
-#endif /* _ASM_DS1286_H */
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index 2731c38bd7ae..e5189572956c 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -23,6 +23,9 @@
#ifndef _ASM_FPU_EMULATOR_H
#define _ASM_FPU_EMULATOR_H
+#include <asm/break.h>
+#include <asm/inst.h>
+
struct mips_fpu_emulator_stats {
unsigned int emulated;
unsigned int loads;
@@ -34,4 +37,18 @@ struct mips_fpu_emulator_stats {
extern struct mips_fpu_emulator_stats fpuemustats;
+extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
+ unsigned long cpc);
+extern int do_dsemulret(struct pt_regs *xcp);
+
+/*
+ * Instruction inserted following the badinst to further tag the sequence
+ */
+#define BD_COOKIE 0x0000bd36 /* tne $0, $0 with baggage */
+
+/*
+ * Break instruction with special math emu break code set
+ */
+#define BREAK_MATH (0x0000000d | (BRK_MEMU << 16))
+
#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/arch/mips/include/asm/m48t35.h b/arch/mips/include/asm/m48t35.h
deleted file mode 100644
index f44852e9a96d..000000000000
--- a/arch/mips/include/asm/m48t35.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip
- */
-#ifndef _ASM_M48T35_H
-#define _ASM_M48T35_H
-
-#include <linux/spinlock.h>
-
-extern spinlock_t rtc_lock;
-
-struct m48t35_rtc {
- volatile u8 pad[0x7ff8]; /* starts at 0x7ff8 */
- volatile u8 control;
- volatile u8 sec;
- volatile u8 min;
- volatile u8 hour;
- volatile u8 day;
- volatile u8 date;
- volatile u8 month;
- volatile u8 year;
-};
-
-#define M48T35_RTC_SET 0x80
-#define M48T35_RTC_STOPPED 0x80
-#define M48T35_RTC_READ 0x40
-
-#endif /* _ASM_M48T35_H */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 0cf15457ecac..c9207b5fd923 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -286,11 +286,12 @@ static inline int __cpu_has_fpu(void)
#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
-static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
+static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
{
switch (c->processor_id & 0xff00) {
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
+ __cpu_name[cpu] = "R2000";
c->isa_level = MIPS_CPU_ISA_I;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
MIPS_CPU_NOFPUEX;
@@ -299,13 +300,19 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
c->tlbsize = 64;
break;
case PRID_IMP_R3000:
- if ((c->processor_id & 0xff) == PRID_REV_R3000A)
- if (cpu_has_confreg())
+ if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
+ if (cpu_has_confreg()) {
c->cputype = CPU_R3081E;
- else
+ __cpu_name[cpu] = "R3081";
+ } else {
c->cputype = CPU_R3000A;
- else
+ __cpu_name[cpu] = "R3000A";
+ }
+ break;
+ } else {
c->cputype = CPU_R3000;
+ __cpu_name[cpu] = "R3000";
+ }
c->isa_level = MIPS_CPU_ISA_I;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
MIPS_CPU_NOFPUEX;
@@ -315,15 +322,21 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R4000:
if (read_c0_config() & CONF_SC) {
- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+ if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
c->cputype = CPU_R4400PC;
- else
+ __cpu_name[cpu] = "R4400PC";
+ } else {
c->cputype = CPU_R4000PC;
+ __cpu_name[cpu] = "R4000PC";
+ }
} else {
- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
+ if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
c->cputype = CPU_R4400SC;
- else
+ __cpu_name[cpu] = "R4400SC";
+ } else {
c->cputype = CPU_R4000SC;
+ __cpu_name[cpu] = "R4000SC";
+ }
}
c->isa_level = MIPS_CPU_ISA_III;
@@ -336,25 +349,34 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
switch (c->processor_id & 0xf0) {
case PRID_REV_VR4111:
c->cputype = CPU_VR4111;
+ __cpu_name[cpu] = "NEC VR4111";
break;
case PRID_REV_VR4121:
c->cputype = CPU_VR4121;
+ __cpu_name[cpu] = "NEC VR4121";
break;
case PRID_REV_VR4122:
- if ((c->processor_id & 0xf) < 0x3)
+ if ((c->processor_id & 0xf) < 0x3) {
c->cputype = CPU_VR4122;
- else
+ __cpu_name[cpu] = "NEC VR4122";
+ } else {
c->cputype = CPU_VR4181A;
+ __cpu_name[cpu] = "NEC VR4181A";
+ }
break;
case PRID_REV_VR4130:
- if ((c->processor_id & 0xf) < 0x4)
+ if ((c->processor_id & 0xf) < 0x4) {
c->cputype = CPU_VR4131;
- else
+ __cpu_name[cpu] = "NEC VR4131";
+ } else {
c->cputype = CPU_VR4133;
+ __cpu_name[cpu] = "NEC VR4133";
+ }
break;
default:
printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n");
c->cputype = CPU_VR41XX;
+ __cpu_name[cpu] = "NEC Vr41xx";
break;
}
c->isa_level = MIPS_CPU_ISA_III;
@@ -363,6 +385,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R4300:
c->cputype = CPU_R4300;
+ __cpu_name[cpu] = "R4300";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
@@ -370,6 +393,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R4600:
c->cputype = CPU_R4600;
+ __cpu_name[cpu] = "R4600";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
@@ -384,6 +408,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
* it's c0_prid id number with the TX3900.
*/
c->cputype = CPU_R4650;
+ __cpu_name[cpu] = "R4650";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
c->tlbsize = 48;
@@ -395,25 +420,26 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
c->cputype = CPU_TX3927;
+ __cpu_name[cpu] = "TX3927";
c->tlbsize = 64;
} else {
switch (c->processor_id & 0xff) {
case PRID_REV_TX3912:
c->cputype = CPU_TX3912;
+ __cpu_name[cpu] = "TX3912";
c->tlbsize = 32;
break;
case PRID_REV_TX3922:
c->cputype = CPU_TX3922;
+ __cpu_name[cpu] = "TX3922";
c->tlbsize = 64;
break;
- default:
- c->cputype = CPU_UNKNOWN;
- break;
}
}
break;
case PRID_IMP_R4700:
c->cputype = CPU_R4700;
+ __cpu_name[cpu] = "R4700";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
@@ -421,6 +447,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_TX49:
c->cputype = CPU_TX49XX;
+ __cpu_name[cpu] = "R49XX";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_LLSC;
if (!(c->processor_id & 0x08))
@@ -429,6 +456,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R5000:
c->cputype = CPU_R5000;
+ __cpu_name[cpu] = "R5000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
@@ -436,6 +464,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R5432:
c->cputype = CPU_R5432;
+ __cpu_name[cpu] = "R5432";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
@@ -443,6 +472,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R5500:
c->cputype = CPU_R5500;
+ __cpu_name[cpu] = "R5500";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
@@ -450,6 +480,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_NEVADA:
c->cputype = CPU_NEVADA;
+ __cpu_name[cpu] = "Nevada";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
@@ -457,6 +488,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R6000:
c->cputype = CPU_R6000;
+ __cpu_name[cpu] = "R6000";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
MIPS_CPU_LLSC;
@@ -464,6 +496,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R6000A:
c->cputype = CPU_R6000A;
+ __cpu_name[cpu] = "R6000A";
c->isa_level = MIPS_CPU_ISA_II;
c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
MIPS_CPU_LLSC;
@@ -471,6 +504,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_RM7000:
c->cputype = CPU_RM7000;
+ __cpu_name[cpu] = "RM7000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
@@ -486,6 +520,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_RM9000:
c->cputype = CPU_RM9000;
+ __cpu_name[cpu] = "RM9000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
@@ -500,6 +535,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R8000:
c->cputype = CPU_R8000;
+ __cpu_name[cpu] = "RM8000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
@@ -508,6 +544,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R10000:
c->cputype = CPU_R10000;
+ __cpu_name[cpu] = "R10000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
@@ -517,6 +554,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R12000:
c->cputype = CPU_R12000;
+ __cpu_name[cpu] = "R12000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
@@ -526,6 +564,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_R14000:
c->cputype = CPU_R14000;
+ __cpu_name[cpu] = "R14000";
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
@@ -535,6 +574,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
break;
case PRID_IMP_LOONGSON2:
c->cputype = CPU_LOONGSON2;
+ __cpu_name[cpu] = "ICT Loongson-2";
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS |
MIPS_CPU_FPU | MIPS_CPU_LLSC |
@@ -652,21 +692,24 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
static void __cpuinit decode_configs(struct cpuinfo_mips *c)
{
+ int ok;
+
/* MIPS32 or MIPS64 compliant CPU. */
c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
- /* Read Config registers. */
- if (!decode_config0(c))
- return; /* actually worth a panic() */
- if (!decode_config1(c))
- return;
- if (!decode_config2(c))
- return;
- if (!decode_config3(c))
- return;
+ ok = decode_config0(c); /* Read Config registers. */
+ BUG_ON(!ok); /* Arch spec violation! */
+ if (ok)
+ ok = decode_config1(c);
+ if (ok)
+ ok = decode_config2(c);
+ if (ok)
+ ok = decode_config3(c);
+
+ mips_probe_watch_registers(c);
}
#ifdef CONFIG_CPU_MIPSR2
@@ -675,52 +718,62 @@ extern void spram_config(void);
static inline void spram_config(void) {}
#endif
-static inline void cpu_probe_mips(struct cpuinfo_mips *c)
+static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
- mips_probe_watch_registers(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
+ __cpu_name[cpu] = "MIPS 4Kc";
break;
case PRID_IMP_4KEC:
c->cputype = CPU_4KEC;
+ __cpu_name[cpu] = "MIPS 4KEc";
break;
case PRID_IMP_4KECR2:
c->cputype = CPU_4KEC;
+ __cpu_name[cpu] = "MIPS 4KEc";
break;
case PRID_IMP_4KSC:
case PRID_IMP_4KSD:
c->cputype = CPU_4KSC;
+ __cpu_name[cpu] = "MIPS 4KSc";
break;
case PRID_IMP_5KC:
c->cputype = CPU_5KC;
+ __cpu_name[cpu] = "MIPS 5Kc";
break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
+ __cpu_name[cpu] = "MIPS 20Kc";
break;
case PRID_IMP_24K:
case PRID_IMP_24KE:
c->cputype = CPU_24K;
+ __cpu_name[cpu] = "MIPS 24Kc";
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
+ __cpu_name[cpu] = "MIPS 25Kc";
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
+ __cpu_name[cpu] = "MIPS 34Kc";
break;
case PRID_IMP_74K:
c->cputype = CPU_74K;
+ __cpu_name[cpu] = "MIPS 74Kc";
break;
case PRID_IMP_1004K:
c->cputype = CPU_1004K;
+ __cpu_name[cpu] = "MIPS 1004Kc";
break;
}
spram_config();
}
-static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
+static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
@@ -729,23 +782,31 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
switch ((c->processor_id >> 24) & 0xff) {
case 0:
c->cputype = CPU_AU1000;
+ __cpu_name[cpu] = "Au1000";
break;
case 1:
c->cputype = CPU_AU1500;
+ __cpu_name[cpu] = "Au1500";
break;
case 2:
c->cputype = CPU_AU1100;
+ __cpu_name[cpu] = "Au1100";
break;
case 3:
c->cputype = CPU_AU1550;
+ __cpu_name[cpu] = "Au1550";
break;
case 4:
c->cputype = CPU_AU1200;
- if (2 == (c->processor_id & 0xff))
+ __cpu_name[cpu] = "Au1200";
+ if ((c->processor_id & 0xff) == 2) {
c->cputype = CPU_AU1250;
+ __cpu_name[cpu] = "Au1250";
+ }
break;
case 5:
c->cputype = CPU_AU1210;
+ __cpu_name[cpu] = "Au1210";
break;
default:
panic("Unknown Au Core!");
@@ -755,154 +816,67 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
}
}
-static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
+static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
+ __cpu_name[cpu] = "SiByte SB1";
/* FPU in pass1 is known to have issues. */
if ((c->processor_id & 0xff) < 0x02)
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
c->cputype = CPU_SB1A;
+ __cpu_name[cpu] = "SiByte SB1A";
break;
}
}
-static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
+static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
+ __cpu_name[cpu] = "Sandcraft SR71000";
c->scache.ways = 8;
c->tlbsize = 64;
break;
}
}
-static inline void cpu_probe_nxp(struct cpuinfo_mips *c)
+static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_PR4450:
c->cputype = CPU_PR4450;
+ __cpu_name[cpu] = "Philips PR4450";
c->isa_level = MIPS_CPU_ISA_M32R1;
break;
- default:
- panic("Unknown NXP Core!"); /* REVISIT: die? */
- break;
}
}
-
-static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_BCM3302:
c->cputype = CPU_BCM3302;
+ __cpu_name[cpu] = "Broadcom BCM3302";
break;
case PRID_IMP_BCM4710:
c->cputype = CPU_BCM4710;
- break;
- default:
- c->cputype = CPU_UNKNOWN;
+ __cpu_name[cpu] = "Broadcom BCM4710";
break;
}
}
const char *__cpu_name[NR_CPUS];
-/*
- * Name a CPU
- */
-static __cpuinit const char *cpu_to_name(struct cpuinfo_mips *c)
-{
- const char *name = NULL;
-
- switch (c->cputype) {
- case CPU_UNKNOWN: name = "unknown"; break;
- case CPU_R2000: name = "R2000"; break;
- case CPU_R3000: name = "R3000"; break;
- case CPU_R3000A: name = "R3000A"; break;
- case CPU_R3041: name = "R3041"; break;
- case CPU_R3051: name = "R3051"; break;
- case CPU_R3052: name = "R3052"; break;
- case CPU_R3081: name = "R3081"; break;
- case CPU_R3081E: name = "R3081E"; break;
- case CPU_R4000PC: name = "R4000PC"; break;
- case CPU_R4000SC: name = "R4000SC"; break;
- case CPU_R4000MC: name = "R4000MC"; break;
- case CPU_R4200: name = "R4200"; break;
- case CPU_R4400PC: name = "R4400PC"; break;
- case CPU_R4400SC: name = "R4400SC"; break;
- case CPU_R4400MC: name = "R4400MC"; break;
- case CPU_R4600: name = "R4600"; break;
- case CPU_R6000: name = "R6000"; break;
- case CPU_R6000A: name = "R6000A"; break;
- case CPU_R8000: name = "R8000"; break;
- case CPU_R10000: name = "R10000"; break;
- case CPU_R12000: name = "R12000"; break;
- case CPU_R14000: name = "R14000"; break;
- case CPU_R4300: name = "R4300"; break;
- case CPU_R4650: name = "R4650"; break;
- case CPU_R4700: name = "R4700"; break;
- case CPU_R5000: name = "R5000"; break;
- case CPU_R5000A: name = "R5000A"; break;
- case CPU_R4640: name = "R4640"; break;
- case CPU_NEVADA: name = "Nevada"; break;
- case CPU_RM7000: name = "RM7000"; break;
- case CPU_RM9000: name = "RM9000"; break;
- case CPU_R5432: name = "R5432"; break;
- case CPU_4KC: name = "MIPS 4Kc"; break;
- case CPU_5KC: name = "MIPS 5Kc"; break;
- case CPU_R4310: name = "R4310"; break;
- case CPU_SB1: name = "SiByte SB1"; break;
- case CPU_SB1A: name = "SiByte SB1A"; break;
- case CPU_TX3912: name = "TX3912"; break;
- case CPU_TX3922: name = "TX3922"; break;
- case CPU_TX3927: name = "TX3927"; break;
- case CPU_AU1000: name = "Au1000"; break;
- case CPU_AU1500: name = "Au1500"; break;
- case CPU_AU1100: name = "Au1100"; break;
- case CPU_AU1550: name = "Au1550"; break;
- case CPU_AU1200: name = "Au1200"; break;
- case CPU_AU1210: name = "Au1210"; break;
- case CPU_AU1250: name = "Au1250"; break;
- case CPU_4KEC: name = "MIPS 4KEc"; break;
- case CPU_4KSC: name = "MIPS 4KSc"; break;
- case CPU_VR41XX: name = "NEC Vr41xx"; break;
- case CPU_R5500: name = "R5500"; break;
- case CPU_TX49XX: name = "TX49xx"; break;
- case CPU_20KC: name = "MIPS 20Kc"; break;
- case CPU_24K: name = "MIPS 24K"; break;
- case CPU_25KF: name = "MIPS 25Kf"; break;
- case CPU_34K: name = "MIPS 34K"; break;
- case CPU_1004K: name = "MIPS 1004K"; break;
- case CPU_74K: name = "MIPS 74K"; break;
- case CPU_VR4111: name = "NEC VR4111"; break;
- case CPU_VR4121: name = "NEC VR4121"; break;
- case CPU_VR4122: name = "NEC VR4122"; break;
- case CPU_VR4131: name = "NEC VR4131"; break;
- case CPU_VR4133: name = "NEC VR4133"; break;
- case CPU_VR4181: name = "NEC VR4181"; break;
- case CPU_VR4181A: name = "NEC VR4181A"; break;
- case CPU_SR71000: name = "Sandcraft SR71000"; break;
- case CPU_BCM3302: name = "Broadcom BCM3302"; break;
- case CPU_BCM4710: name = "Broadcom BCM4710"; break;
- case CPU_PR4450: name = "Philips PR4450"; break;
- case CPU_LOONGSON2: name = "ICT Loongson-2"; break;
- default:
- BUG();
- }
-
- return name;
-}
-
__cpuinit void cpu_probe(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
@@ -915,30 +889,31 @@ __cpuinit void cpu_probe(void)
c->processor_id = read_c0_prid();
switch (c->processor_id & 0xff0000) {
case PRID_COMP_LEGACY:
- cpu_probe_legacy(c);
+ cpu_probe_legacy(c, cpu);
break;
case PRID_COMP_MIPS:
- cpu_probe_mips(c);
+ cpu_probe_mips(c, cpu);
break;
case PRID_COMP_ALCHEMY:
- cpu_probe_alchemy(c);
+ cpu_probe_alchemy(c, cpu);
break;
case PRID_COMP_SIBYTE:
- cpu_probe_sibyte(c);
+ cpu_probe_sibyte(c, cpu);
break;
case PRID_COMP_BROADCOM:
- cpu_probe_broadcom(c);
+ cpu_probe_broadcom(c, cpu);
break;
case PRID_COMP_SANDCRAFT:
- cpu_probe_sandcraft(c);
+ cpu_probe_sandcraft(c, cpu);
break;
case PRID_COMP_NXP:
- cpu_probe_nxp(c);
+ cpu_probe_nxp(c, cpu);
break;
- default:
- c->cputype = CPU_UNKNOWN;
}
+ BUG_ON(!__cpu_name[cpu]);
+ BUG_ON(c->cputype == CPU_UNKNOWN);
+
/*
* Platform code can force the cpu type to optimize code
* generation. In that case be sure the cpu type is correctly
@@ -958,8 +933,6 @@ __cpuinit void cpu_probe(void)
}
}
- __cpu_name[cpu] = cpu_to_name(c);
-
if (cpu_has_mips_r2)
c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
else
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index b79ea7055ec3..8bf88faf5afd 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -195,12 +195,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
/* preload SMP state for boot cpu */
void __devinit smp_prepare_boot_cpu(void)
{
- /*
- * This assumes that bootup is always handled by the processor
- * with the logic and physical number 0.
- */
- __cpu_number_map[0] = 0;
- __cpu_logical_map[0] = 0;
cpu_set(0, phys_cpu_present_map);
cpu_set(0, cpu_online_map);
cpu_set(0, cpu_callin_map);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 80b9e070c207..353056110f2b 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -32,6 +32,7 @@
#include <asm/cpu.h>
#include <asm/dsp.h>
#include <asm/fpu.h>
+#include <asm/fpu_emulator.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/module.h>
@@ -722,6 +723,21 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
die_if_kernel("Kernel bug detected", regs);
force_sig(SIGTRAP, current);
break;
+ case BRK_MEMU:
+ /*
+ * Address errors may be deliberately induced by the FPU
+ * emulator to retake control of the CPU after executing the
+ * instruction in the delay slot of an emulated branch.
+ *
+ * Terminate if exception was recognized as a delay slot return
+ * otherwise handle as normal.
+ */
+ if (do_dsemulret(regs))
+ return;
+
+ die_if_kernel("Math emu break/trap", regs);
+ force_sig(SIGTRAP, current);
+ break;
default:
scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
die_if_kernel(b, regs);
@@ -1555,6 +1571,8 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
#ifdef CONFIG_64BIT
unsigned long uncached_ebase = TO_UNCAC(ebase);
#endif
+ if (cpu_has_mips_r2)
+ ebase += (read_c0_ebase() & 0x3ffff000);
if (!addr)
panic(panic_null_cerr);
@@ -1588,8 +1606,11 @@ void __init trap_init(void)
if (cpu_has_veic || cpu_has_vint)
ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
- else
+ else {
ebase = CAC_BASE;
+ if (cpu_has_mips_r2)
+ ebase += (read_c0_ebase() & 0x3ffff000);
+ }
per_cpu_trap_init();
@@ -1697,11 +1718,11 @@ void __init trap_init(void)
if (cpu_has_vce)
/* Special exception: R4[04]00 uses also the divec space. */
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100);
+ memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100);
else if (cpu_has_4kex)
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+ memcpy((void *)(ebase + 0x180), &except_vec3_generic, 0x80);
else
- memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80);
+ memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80);
signal_init();
#ifdef CONFIG_MIPS32_COMPAT
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 20709669e592..bf4c4a979abb 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -499,22 +499,10 @@ sigill:
asmlinkage void do_ade(struct pt_regs *regs)
{
- extern int do_dsemulret(struct pt_regs *);
unsigned int __user *pc;
mm_segment_t seg;
/*
- * Address errors may be deliberately induced by the FPU emulator to
- * retake control of the CPU after executing the instruction in the
- * delay slot of an emulated branch.
- */
- /* Terminate if exception was recognized as a delay slot return */
- if (do_dsemulret(regs))
- return;
-
- /* Otherwise handle as normal */
-
- /*
* Did we catch a fault trying to load an instruction?
* Or are we running in MIPS16 mode?
*/
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 7ec0b217dfd3..890f77927d62 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -48,7 +48,6 @@
#include <asm/branch.h>
#include "ieee754.h"
-#include "dsemul.h"
/* Strap kernel emulator for full MIPS IV emulation */
@@ -346,9 +345,6 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
/* cop control register rd -> gpr[rt] */
u32 value;
- if (ir == CP1UNDEF) {
- return do_dsemulret(xcp);
- }
if (MIPSInst_RD(ir) == FPCREG_CSR) {
value = ctx->fcr31;
value = (value & ~0x3) | mips_rm[value & 0x3];
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index 653e325849e4..df7b9d928efc 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -18,7 +18,6 @@
#include <asm/fpu_emulator.h>
#include "ieee754.h"
-#include "dsemul.h"
/* Strap kernel emulator for full MIPS IV emulation */
@@ -94,7 +93,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
return SIGBUS;
err = __put_user(ir, &fr->emul);
- err |= __put_user((mips_instruction)BADINST, &fr->badinst);
+ err |= __put_user((mips_instruction)BREAK_MATH, &fr->badinst);
err |= __put_user((mips_instruction)BD_COOKIE, &fr->cookie);
err |= __put_user(cpc, &fr->epc);
@@ -130,13 +129,13 @@ int do_dsemulret(struct pt_regs *xcp)
/*
* Do some sanity checking on the stackframe:
*
- * - Is the instruction pointed to by the EPC an BADINST?
+ * - Is the instruction pointed to by the EPC an BREAK_MATH?
* - Is the following memory word the BD_COOKIE?
*/
err = __get_user(insn, &fr->badinst);
err |= __get_user(cookie, &fr->cookie);
- if (unlikely(err || (insn != BADINST) || (cookie != BD_COOKIE))) {
+ if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) {
fpuemustats.errors++;
return 0;
}
diff --git a/arch/mips/math-emu/dsemul.h b/arch/mips/math-emu/dsemul.h
deleted file mode 100644
index 091f0e76730f..000000000000
--- a/arch/mips/math-emu/dsemul.h
+++ /dev/null
@@ -1,17 +0,0 @@
-extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc);
-extern int do_dsemulret(struct pt_regs *xcp);
-
-/* Instruction which will always cause an address error */
-#define AdELOAD 0x8c000001 /* lw $0,1($0) */
-/* Instruction which will plainly cause a CP1 exception when FPU is disabled */
-#define CP1UNDEF 0x44400001 /* cfc1 $0,$0 undef */
-
-/* Instruction inserted following the badinst to further tag the sequence */
-#define BD_COOKIE 0x0000bd36 /* tne $0,$0 with baggage */
-
-/* Setup which instruction to use for trampoline */
-#ifdef STANDALONE_EMULATOR
-#define BADINST CP1UNDEF
-#else
-#define BADINST AdELOAD
-#endif
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 4a74423b2ba8..01129a9d50fa 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -49,6 +49,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/io.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
@@ -210,10 +211,6 @@ static void __init rbtx4927_mem_setup(void)
/* TX4927-SIO DTR on (PIO[15]) */
gpio_request(15, "sio-dtr");
gpio_direction_output(15, 1);
- gpio_request(0, "led");
- gpio_direction_output(0, 1);
- gpio_request(1, "led");
- gpio_direction_output(1, 1);
tx4927_sio_init(0, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
@@ -315,6 +312,25 @@ static void __init rbtx4927_mtd_init(void)
tx4927_mtd_init(i);
}
+static void __init rbtx4927_gpioled_init(void)
+{
+ static struct gpio_led leds[] = {
+ { .name = "gpioled:green:0", .gpio = 0, .active_low = 1, },
+ { .name = "gpioled:green:1", .gpio = 1, .active_low = 1, },
+ };
+ static struct gpio_led_platform_data pdata = {
+ .num_leds = ARRAY_SIZE(leds),
+ .leds = leds,
+ };
+ struct platform_device *pdev = platform_device_alloc("leds-gpio", 0);
+
+ if (!pdev)
+ return;
+ pdev->dev.platform_data = &pdata;
+ if (platform_device_add(pdev))
+ platform_device_put(pdev);
+}
+
static void __init rbtx4927_device_init(void)
{
toshiba_rbtx4927_rtc_init();
@@ -322,6 +338,7 @@ static void __init rbtx4927_device_init(void)
tx4927_wdt_init();
rbtx4927_mtd_init();
txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL);
+ rbtx4927_gpioled_init();
}
struct txx9_board_vec rbtx4927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 6daee9b1cd5e..98fbd9391bf8 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -308,16 +308,22 @@ static void __init rbtx4939_device_init(void)
#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
int i, j;
unsigned char ethaddr[2][6];
+ u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f;
+
for (i = 0; i < 2; i++) {
unsigned long area = CKSEG1 + 0x1fff0000 + (i * 0x10);
- if (readb(rbtx4939_bdipsw_addr) & 8) {
+ if (bdipsw == 0)
+ memcpy(ethaddr[i], (void *)area, 6);
+ else {
u16 buf[3];
- area -= 0x03000000;
+ if (bdipsw & 8)
+ area -= 0x03000000;
+ else
+ area -= 0x01000000;
for (j = 0; j < 3; j++)
buf[j] = le16_to_cpup((u16 *)(area + j * 2));
memcpy(ethaddr[i], buf, 6);
- } else
- memcpy(ethaddr[i], (void *)area, 6);
+ }
}
tx4939_ethaddr_init(ethaddr[0], ethaddr[1]);
#endif
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 122254155ae1..43b35d0369d6 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -812,28 +812,6 @@ config JS_RTC
To compile this driver as a module, choose M here: the
module will be called js-rtc.
-config SGI_DS1286
- tristate "SGI DS1286 RTC support"
- depends on SGI_HAS_DS1286
- help
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock built into your computer.
- Every SGI has such a clock built in. It reports status information
- via the file /proc/rtc and its behaviour is set by various ioctls on
- /dev/rtc.
-
-config SGI_IP27_RTC
- bool "SGI M48T35 RTC support"
- depends on SGI_IP27
- help
- If you say Y here and create a character special file /dev/rtc with
- major number 10 and minor number 135 using mknod ("man mknod"), you
- will get access to the real time clock built into your computer.
- Every SGI has such a clock built in. It reports status information
- via the file /proc/rtc and its behaviour is set by various ioctls on
- /dev/rtc.
-
config GEN_RTC
tristate "Generic /dev/rtc emulation"
depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 1a4247dccac4..438f71317c5c 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -74,8 +74,6 @@ obj-$(CONFIG_RTC) += rtc.o
obj-$(CONFIG_HPET) += hpet.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o
-obj-$(CONFIG_SGI_DS1286) += ds1286.o
-obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
obj-$(CONFIG_DS1302) += ds1302.o
obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/
ifeq ($(CONFIG_GENERIC_NVRAM),y)
diff --git a/drivers/char/ds1286.c b/drivers/char/ds1286.c
deleted file mode 100644
index 0a826d7be10e..000000000000
--- a/drivers/char/ds1286.c
+++ /dev/null
@@ -1,585 +0,0 @@
-/*
- * DS1286 Real Time Clock interface for Linux
- *
- * Copyright (C) 1998, 1999, 2000 Ralf Baechle
- *
- * Based on code written by Paul Gortmaker.
- *
- * This driver allows use of the real time clock (built into nearly all
- * computers) from user space. It exports the /dev/rtc interface supporting
- * various ioctl() and also the /proc/rtc pseudo-file for status
- * information.
- *
- * The ioctls can be used to set the interrupt behaviour and generation rate
- * from the RTC via IRQ 8. Then the /dev/rtc interface can be used to make
- * use of these timer interrupts, be they interval or alarm based.
- *
- * The /dev/rtc interface will block on reads until an interrupt has been
- * received. If a RTC interrupt has already happened, it will output an
- * unsigned long and then block. The output value contains the interrupt
- * status in the low byte and the number of interrupts since the last read
- * in the remaining high bytes. The /dev/rtc interface can also be used with
- * the select(2) call.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/ds1286.h>
-#include <linux/smp_lock.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/rtc.h>
-#include <linux/spinlock.h>
-#include <linux/bcd.h>
-#include <linux/proc_fs.h>
-#include <linux/jiffies.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
-#define DS1286_VERSION "1.0"
-
-/*
- * We sponge a minor off of the misc major. No need slurping
- * up another valuable major dev number for this. If you add
- * an ioctl, make sure you don't conflict with SPARC's RTC
- * ioctls.
- */
-
-static DECLARE_WAIT_QUEUE_HEAD(ds1286_wait);
-
-static ssize_t ds1286_read(struct file *file, char *buf,
- size_t count, loff_t *ppos);
-
-static int ds1286_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
-
-static unsigned int ds1286_poll(struct file *file, poll_table *wait);
-
-static void ds1286_get_alm_time (struct rtc_time *alm_tm);
-static void ds1286_get_time(struct rtc_time *rtc_tm);
-static int ds1286_set_time(struct rtc_time *rtc_tm);
-
-static inline unsigned char ds1286_is_updating(void);
-
-static DEFINE_SPINLOCK(ds1286_lock);
-
-static int ds1286_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-
-/*
- * Bits in rtc_status. (7 bits of room for future expansion)
- */
-
-#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */
-#define RTC_TIMER_ON 0x02 /* missed irq timer active */
-
-static unsigned char ds1286_status; /* bitmapped status byte. */
-
-static unsigned char days_in_mo[] = {
- 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-/*
- * Now all the various file operations that we export.
- */
-
-static ssize_t ds1286_read(struct file *file, char *buf,
- size_t count, loff_t *ppos)
-{
- return -EIO;
-}
-
-static int ds1286_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct rtc_time wtime;
-
- switch (cmd) {
- case RTC_AIE_OFF: /* Mask alarm int. enab. bit */
- {
- unsigned long flags;
- unsigned char val;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- spin_lock_irqsave(&ds1286_lock, flags);
- val = rtc_read(RTC_CMD);
- val |= RTC_TDM;
- rtc_write(val, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
- }
- case RTC_AIE_ON: /* Allow alarm interrupts. */
- {
- unsigned long flags;
- unsigned char val;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- spin_lock_irqsave(&ds1286_lock, flags);
- val = rtc_read(RTC_CMD);
- val &= ~RTC_TDM;
- rtc_write(val, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
- }
- case RTC_WIE_OFF: /* Mask watchdog int. enab. bit */
- {
- unsigned long flags;
- unsigned char val;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- spin_lock_irqsave(&ds1286_lock, flags);
- val = rtc_read(RTC_CMD);
- val |= RTC_WAM;
- rtc_write(val, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
- }
- case RTC_WIE_ON: /* Allow watchdog interrupts. */
- {
- unsigned long flags;
- unsigned char val;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- spin_lock_irqsave(&ds1286_lock, flags);
- val = rtc_read(RTC_CMD);
- val &= ~RTC_WAM;
- rtc_write(val, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
- }
- case RTC_ALM_READ: /* Read the present alarm time */
- {
- /*
- * This returns a struct rtc_time. Reading >= 0xc0
- * means "don't care" or "match all". Only the tm_hour,
- * tm_min, and tm_sec values are filled in.
- */
-
- memset(&wtime, 0, sizeof(wtime));
- ds1286_get_alm_time(&wtime);
- break;
- }
- case RTC_ALM_SET: /* Store a time into the alarm */
- {
- /*
- * This expects a struct rtc_time. Writing 0xff means
- * "don't care" or "match all". Only the tm_hour,
- * tm_min and tm_sec are used.
- */
- unsigned char hrs, min, sec;
- struct rtc_time alm_tm;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- if (copy_from_user(&alm_tm, (struct rtc_time*)arg,
- sizeof(struct rtc_time)))
- return -EFAULT;
-
- hrs = alm_tm.tm_hour;
- min = alm_tm.tm_min;
- sec = alm_tm.tm_sec;
-
- if (hrs >= 24)
- hrs = 0xff;
-
- if (min >= 60)
- min = 0xff;
-
- if (sec != 0)
- return -EINVAL;
-
- min = bin2bcd(min);
- min = bin2bcd(hrs);
-
- spin_lock(&ds1286_lock);
- rtc_write(hrs, RTC_HOURS_ALARM);
- rtc_write(min, RTC_MINUTES_ALARM);
- spin_unlock(&ds1286_lock);
-
- return 0;
- }
- case RTC_RD_TIME: /* Read the time/date from RTC */
- {
- memset(&wtime, 0, sizeof(wtime));
- ds1286_get_time(&wtime);
- break;
- }
- case RTC_SET_TIME: /* Set the RTC */
- {
- struct rtc_time rtc_tm;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- if (copy_from_user(&rtc_tm, (struct rtc_time*)arg,
- sizeof(struct rtc_time)))
- return -EFAULT;
-
- return ds1286_set_time(&rtc_tm);
- }
- default:
- return -EINVAL;
- }
- return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-/*
- * We enforce only one user at a time here with the open/close.
- * Also clear the previous interrupt data on an open, and clean
- * up things on a close.
- */
-
-static int ds1286_open(struct inode *inode, struct file *file)
-{
- lock_kernel();
- spin_lock_irq(&ds1286_lock);
-
- if (ds1286_status & RTC_IS_OPEN)
- goto out_busy;
-
- ds1286_status |= RTC_IS_OPEN;
-
- spin_unlock_irq(&ds1286_lock);
- unlock_kernel();
- return 0;
-
-out_busy:
- spin_lock_irq(&ds1286_lock);
- unlock_kernel();
- return -EBUSY;
-}
-
-static int ds1286_release(struct inode *inode, struct file *file)
-{
- ds1286_status &= ~RTC_IS_OPEN;
-
- return 0;
-}
-
-static unsigned int ds1286_poll(struct file *file, poll_table *wait)
-{
- poll_wait(file, &ds1286_wait, wait);
-
- return 0;
-}
-
-/*
- * The various file operations we support.
- */
-
-static const struct file_operations ds1286_fops = {
- .llseek = no_llseek,
- .read = ds1286_read,
- .poll = ds1286_poll,
- .ioctl = ds1286_ioctl,
- .open = ds1286_open,
- .release = ds1286_release,
-};
-
-static struct miscdevice ds1286_dev=
-{
- .minor = RTC_MINOR,
- .name = "rtc",
- .fops = &ds1286_fops,
-};
-
-static int __init ds1286_init(void)
-{
- int err;
-
- printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION);
-
- err = misc_register(&ds1286_dev);
- if (err)
- goto out;
-
- if (!create_proc_read_entry("driver/rtc", 0, 0, ds1286_read_proc, NULL)) {
- err = -ENOMEM;
-
- goto out_deregister;
- }
-
- return 0;
-
-out_deregister:
- misc_deregister(&ds1286_dev);
-
-out:
- return err;
-}
-
-static void __exit ds1286_exit(void)
-{
- remove_proc_entry("driver/rtc", NULL);
- misc_deregister(&ds1286_dev);
-}
-
-static char *days[] = {
- "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"
-};
-
-/*
- * Info exported via "/proc/rtc".
- */
-static int ds1286_proc_output(char *buf)
-{
- char *p, *s;
- struct rtc_time tm;
- unsigned char hundredth, month, cmd, amode;
-
- p = buf;
-
- ds1286_get_time(&tm);
- hundredth = rtc_read(RTC_HUNDREDTH_SECOND);
- hundredth = bcd2bin(hundredth);
-
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d.%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n",
- tm.tm_hour, tm.tm_min, tm.tm_sec, hundredth,
- tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-
- /*
- * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will
- * match any value for that particular field. Values that are
- * greater than a valid time, but less than 0xc0 shouldn't appear.
- */
- ds1286_get_alm_time(&tm);
- p += sprintf(p, "alarm\t\t: %s ", days[tm.tm_wday]);
- if (tm.tm_hour <= 24)
- p += sprintf(p, "%02d:", tm.tm_hour);
- else
- p += sprintf(p, "**:");
-
- if (tm.tm_min <= 59)
- p += sprintf(p, "%02d\n", tm.tm_min);
- else
- p += sprintf(p, "**\n");
-
- month = rtc_read(RTC_MONTH);
- p += sprintf(p,
- "oscillator\t: %s\n"
- "square_wave\t: %s\n",
- (month & RTC_EOSC) ? "disabled" : "enabled",
- (month & RTC_ESQW) ? "disabled" : "enabled");
-
- amode = ((rtc_read(RTC_MINUTES_ALARM) & 0x80) >> 5) |
- ((rtc_read(RTC_HOURS_ALARM) & 0x80) >> 6) |
- ((rtc_read(RTC_DAY_ALARM) & 0x80) >> 7);
- if (amode == 7) s = "each minute";
- else if (amode == 3) s = "minutes match";
- else if (amode == 1) s = "hours and minutes match";
- else if (amode == 0) s = "days, hours and minutes match";
- else s = "invalid";
- p += sprintf(p, "alarm_mode\t: %s\n", s);
-
- cmd = rtc_read(RTC_CMD);
- p += sprintf(p,
- "alarm_enable\t: %s\n"
- "wdog_alarm\t: %s\n"
- "alarm_mask\t: %s\n"
- "wdog_alarm_mask\t: %s\n"
- "interrupt_mode\t: %s\n"
- "INTB_mode\t: %s_active\n"
- "interrupt_pins\t: %s\n",
- (cmd & RTC_TDF) ? "yes" : "no",
- (cmd & RTC_WAF) ? "yes" : "no",
- (cmd & RTC_TDM) ? "disabled" : "enabled",
- (cmd & RTC_WAM) ? "disabled" : "enabled",
- (cmd & RTC_PU_LVL) ? "pulse" : "level",
- (cmd & RTC_IBH_LO) ? "low" : "high",
- (cmd & RTC_IPSW) ? "unswapped" : "swapped");
-
- return p - buf;
-}
-
-static int ds1286_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = ds1286_proc_output (page);
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count)
- len = count;
- if (len<0)
- len = 0;
-
- return len;
-}
-
-/*
- * Returns true if a clock update is in progress
- */
-static inline unsigned char ds1286_is_updating(void)
-{
- return rtc_read(RTC_CMD) & RTC_TE;
-}
-
-
-static void ds1286_get_time(struct rtc_time *rtc_tm)
-{
- unsigned char save_control;
- unsigned long flags;
-
- /*
- * read RTC once any update in progress is done. The update
- * can take just over 2ms. We wait 10 to 20ms. There is no need to
- * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
- * If you need to know *exactly* when a second has started, enable
- * periodic update complete interrupts, (via ioctl) and then
- * immediately read /dev/rtc which will block until you get the IRQ.
- * Once the read clears, read the RTC time (again via ioctl). Easy.
- */
-
- if (ds1286_is_updating() != 0)
- msleep(20);
-
- /*
- * Only the values that we read from the RTC are set. We leave
- * tm_wday, tm_yday and tm_isdst untouched. Even though the
- * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
- * by the RTC when initially set to a non-zero value.
- */
- spin_lock_irqsave(&ds1286_lock, flags);
- save_control = rtc_read(RTC_CMD);
- rtc_write((save_control|RTC_TE), RTC_CMD);
-
- rtc_tm->tm_sec = rtc_read(RTC_SECONDS);
- rtc_tm->tm_min = rtc_read(RTC_MINUTES);
- rtc_tm->tm_hour = rtc_read(RTC_HOURS) & 0x3f;
- rtc_tm->tm_mday = rtc_read(RTC_DATE);
- rtc_tm->tm_mon = rtc_read(RTC_MONTH) & 0x1f;
- rtc_tm->tm_year = rtc_read(RTC_YEAR);
-
- rtc_write(save_control, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
- rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
- rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
- rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
- rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
- rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
-
- /*
- * Account for differences between how the RTC uses the values
- * and how they are defined in a struct rtc_time;
- */
- if (rtc_tm->tm_year < 45)
- rtc_tm->tm_year += 30;
- if ((rtc_tm->tm_year += 40) < 70)
- rtc_tm->tm_year += 100;
-
- rtc_tm->tm_mon--;
-}
-
-static int ds1286_set_time(struct rtc_time *rtc_tm)
-{
- unsigned char mon, day, hrs, min, sec, leap_yr;
- unsigned char save_control;
- unsigned int yrs;
- unsigned long flags;
-
-
- yrs = rtc_tm->tm_year + 1900;
- mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */
- day = rtc_tm->tm_mday;
- hrs = rtc_tm->tm_hour;
- min = rtc_tm->tm_min;
- sec = rtc_tm->tm_sec;
-
- if (yrs < 1970)
- return -EINVAL;
-
- leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
- if ((mon > 12) || (day == 0))
- return -EINVAL;
-
- if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
- return -EINVAL;
-
- if ((hrs >= 24) || (min >= 60) || (sec >= 60))
- return -EINVAL;
-
- if ((yrs -= 1940) > 255) /* They are unsigned */
- return -EINVAL;
-
- if (yrs >= 100)
- yrs -= 100;
-
- sec = bin2bcd(sec);
- min = bin2bcd(min);
- hrs = bin2bcd(hrs);
- day = bin2bcd(day);
- mon = bin2bcd(mon);
- yrs = bin2bcd(yrs);
-
- spin_lock_irqsave(&ds1286_lock, flags);
- save_control = rtc_read(RTC_CMD);
- rtc_write((save_control|RTC_TE), RTC_CMD);
-
- rtc_write(yrs, RTC_YEAR);
- rtc_write(mon, RTC_MONTH);
- rtc_write(day, RTC_DATE);
- rtc_write(hrs, RTC_HOURS);
- rtc_write(min, RTC_MINUTES);
- rtc_write(sec, RTC_SECONDS);
- rtc_write(0, RTC_HUNDREDTH_SECOND);
-
- rtc_write(save_control, RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- return 0;
-}
-
-static void ds1286_get_alm_time(struct rtc_time *alm_tm)
-{
- unsigned char cmd;
- unsigned long flags;
-
- /*
- * Only the values that we read from the RTC are set. That
- * means only tm_wday, tm_hour, tm_min.
- */
- spin_lock_irqsave(&ds1286_lock, flags);
- alm_tm->tm_min = rtc_read(RTC_MINUTES_ALARM) & 0x7f;
- alm_tm->tm_hour = rtc_read(RTC_HOURS_ALARM) & 0x1f;
- alm_tm->tm_wday = rtc_read(RTC_DAY_ALARM) & 0x07;
- cmd = rtc_read(RTC_CMD);
- spin_unlock_irqrestore(&ds1286_lock, flags);
-
- alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
- alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
- alm_tm->tm_sec = 0;
-}
-
-module_init(ds1286_init);
-module_exit(ds1286_exit);
-
-MODULE_AUTHOR("Ralf Baechle");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(RTC_MINOR);
diff --git a/drivers/char/ip27-rtc.c b/drivers/char/ip27-rtc.c
deleted file mode 100644
index 2abd881b4cbc..000000000000
--- a/drivers/char/ip27-rtc.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * Driver for the SGS-Thomson M48T35 Timekeeper RAM chip
- *
- * Real Time Clock interface for Linux
- *
- * TODO: Implement periodic interrupts.
- *
- * Copyright (C) 2000 Silicon Graphics, Inc.
- * Written by Ulf Carlsson (ulfc@engr.sgi.com)
- *
- * Based on code written by Paul Gortmaker.
- *
- * This driver allows use of the real time clock (built into
- * nearly all computers) from user space. It exports the /dev/rtc
- * interface supporting various ioctl() and also the /proc/rtc
- * pseudo-file for status information.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#define RTC_VERSION "1.09b"
-
-#include <linux/bcd.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/smp_lock.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/rtc.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-
-#include <asm/m48t35.h>
-#include <asm/sn/ioc3.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/sn0/ip27.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/sn_private.h>
-
-static long rtc_ioctl(struct file *filp, unsigned int cmd,
- unsigned long arg);
-
-static int rtc_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-
-static void get_rtc_time(struct rtc_time *rtc_tm);
-
-/*
- * Bits in rtc_status. (6 bits of room for future expansion)
- */
-
-#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */
-#define RTC_TIMER_ON 0x02 /* missed irq timer active */
-
-static unsigned char rtc_status; /* bitmapped status byte. */
-static unsigned long rtc_freq; /* Current periodic IRQ rate */
-static struct m48t35_rtc *rtc;
-
-/*
- * If this driver ever becomes modularised, it will be really nice
- * to make the epoch retain its value across module reload...
- */
-
-static unsigned long epoch = 1970; /* year corresponding to 0x00 */
-
-static const unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-static long rtc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-
- struct rtc_time wtime;
-
- switch (cmd) {
- case RTC_RD_TIME: /* Read the time/date from RTC */
- {
- get_rtc_time(&wtime);
- break;
- }
- case RTC_SET_TIME: /* Set the RTC */
- {
- struct rtc_time rtc_tm;
- unsigned char mon, day, hrs, min, sec, leap_yr;
- unsigned int yrs;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- if (copy_from_user(&rtc_tm, (struct rtc_time*)arg,
- sizeof(struct rtc_time)))
- return -EFAULT;
-
- yrs = rtc_tm.tm_year + 1900;
- mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
- day = rtc_tm.tm_mday;
- hrs = rtc_tm.tm_hour;
- min = rtc_tm.tm_min;
- sec = rtc_tm.tm_sec;
-
- if (yrs < 1970)
- return -EINVAL;
-
- leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
- if ((mon > 12) || (day == 0))
- return -EINVAL;
-
- if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
- return -EINVAL;
-
- if ((hrs >= 24) || (min >= 60) || (sec >= 60))
- return -EINVAL;
-
- if ((yrs -= epoch) > 255) /* They are unsigned */
- return -EINVAL;
-
- if (yrs > 169)
- return -EINVAL;
-
- if (yrs >= 100)
- yrs -= 100;
-
- sec = bin2bcd(sec);
- min = bin2bcd(min);
- hrs = bin2bcd(hrs);
- day = bin2bcd(day);
- mon = bin2bcd(mon);
- yrs = bin2bcd(yrs);
-
- spin_lock_irq(&rtc_lock);
- rtc->control |= M48T35_RTC_SET;
- rtc->year = yrs;
- rtc->month = mon;
- rtc->date = day;
- rtc->hour = hrs;
- rtc->min = min;
- rtc->sec = sec;
- rtc->control &= ~M48T35_RTC_SET;
- spin_unlock_irq(&rtc_lock);
-
- return 0;
- }
- default:
- return -EINVAL;
- }
- return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-/*
- * We enforce only one user at a time here with the open/close.
- * Also clear the previous interrupt data on an open, and clean
- * up things on a close.
- */
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
- lock_kernel();
- spin_lock_irq(&rtc_lock);
-
- if (rtc_status & RTC_IS_OPEN) {
- spin_unlock_irq(&rtc_lock);
- unlock_kernel();
- return -EBUSY;
- }
-
- rtc_status |= RTC_IS_OPEN;
- spin_unlock_irq(&rtc_lock);
- unlock_kernel();
-
- return 0;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
- /*
- * Turn off all interrupts once the device is no longer
- * in use, and clear the data.
- */
-
- spin_lock_irq(&rtc_lock);
- rtc_status &= ~RTC_IS_OPEN;
- spin_unlock_irq(&rtc_lock);
-
- return 0;
-}
-
-/*
- * The various file operations we support.
- */
-
-static const struct file_operations rtc_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = rtc_ioctl,
- .open = rtc_open,
- .release = rtc_release,
-};
-
-static struct miscdevice rtc_dev=
-{
- RTC_MINOR,
- "rtc",
- &rtc_fops
-};
-
-static int __init rtc_init(void)
-{
- rtc = (struct m48t35_rtc *)
- (KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0);
-
- printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION);
- if (misc_register(&rtc_dev)) {
- printk(KERN_ERR "rtc: cannot register misc device.\n");
- return -ENODEV;
- }
- if (!create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL)) {
- printk(KERN_ERR "rtc: cannot create /proc/rtc.\n");
- misc_deregister(&rtc_dev);
- return -ENOENT;
- }
-
- rtc_freq = 1024;
-
- return 0;
-}
-
-static void __exit rtc_exit (void)
-{
- /* interrupts and timer disabled at this point by rtc_release */
-
- remove_proc_entry ("rtc", NULL);
- misc_deregister(&rtc_dev);
-}
-
-module_init(rtc_init);
-module_exit(rtc_exit);
-
-/*
- * Info exported via "/proc/rtc".
- */
-
-static int rtc_get_status(char *buf)
-{
- char *p;
- struct rtc_time tm;
-
- /*
- * Just emulate the standard /proc/rtc
- */
-
- p = buf;
-
- get_rtc_time(&tm);
-
- /*
- * There is no way to tell if the luser has the RTC set for local
- * time or for Universal Standard Time (GMT). Probably local though.
- */
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n"
- "rtc_epoch\t: %04lu\n"
- "24hr\t\t: yes\n",
- tm.tm_hour, tm.tm_min, tm.tm_sec,
- tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch);
-
- return p - buf;
-}
-
-static int rtc_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = rtc_get_status(page);
- if (len <= off+count) *eof = 1;
- *start = page + off;
- len -= off;
- if (len>count) len = count;
- if (len<0) len = 0;
- return len;
-}
-
-static void get_rtc_time(struct rtc_time *rtc_tm)
-{
- /*
- * Do we need to wait for the last update to finish?
- */
-
- /*
- * Only the values that we read from the RTC are set. We leave
- * tm_wday, tm_yday and tm_isdst untouched. Even though the
- * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
- * by the RTC when initially set to a non-zero value.
- */
- spin_lock_irq(&rtc_lock);
- rtc->control |= M48T35_RTC_READ;
- rtc_tm->tm_sec = rtc->sec;
- rtc_tm->tm_min = rtc->min;
- rtc_tm->tm_hour = rtc->hour;
- rtc_tm->tm_mday = rtc->date;
- rtc_tm->tm_mon = rtc->month;
- rtc_tm->tm_year = rtc->year;
- rtc->control &= ~M48T35_RTC_READ;
- spin_unlock_irq(&rtc_lock);
-
- rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
- rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
- rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
- rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
- rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
- rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
-
- /*
- * Account for differences between how the RTC uses the values
- * and how they are defined in a struct rtc_time;
- */
- if ((rtc_tm->tm_year += (epoch - 1900)) <= 69)
- rtc_tm->tm_year += 100;
-
- rtc_tm->tm_mon--;
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 00:52:16 +0000