aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/leds/ledtrig-oneshot.txt59
-rw-r--r--drivers/leds/Kconfig14
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/ledtrig-oneshot.c204
4 files changed, 278 insertions, 0 deletions
diff --git a/Documentation/leds/ledtrig-oneshot.txt b/Documentation/leds/ledtrig-oneshot.txt
new file mode 100644
index 000000000000..07cd1fa41a3a
--- /dev/null
+++ b/Documentation/leds/ledtrig-oneshot.txt
@@ -0,0 +1,59 @@
+One-shot LED Trigger
+====================
+
+This is a LED trigger useful for signaling the user of an event where there are
+no clear trap points to put standard led-on and led-off settings. Using this
+trigger, the application needs only to signal the trigger when an event has
+happened, than the trigger turns the LED on and than keeps it off for a
+specified amount of time.
+
+This trigger is meant to be usable both for sporadic and dense events. In the
+first case, the trigger produces a clear single controlled blink for each
+event, while in the latter it keeps blinking at constant rate, as to signal
+that the events are arriving continuously.
+
+A one-shot LED only stays in a constant state when there are no events. An
+additional "invert" property specifies if the LED has to stay off (normal) or
+on (inverted) when not rearmed.
+
+The trigger can be activated from user space on led class devices as shown
+below:
+
+ echo oneshot > trigger
+
+This adds the following sysfs attributes to the LED:
+
+ delay_on - specifies for how many milliseconds the LED has to stay at
+ LED_FULL brightness after it has been armed.
+ Default to 100 ms.
+
+ delay_off - specifies for how many milliseconds the LED has to stay at
+ LED_OFF brightness after it has been armed.
+ Default to 100 ms.
+
+ invert - reverse the blink logic. If set to 0 (default) blink on for delay_on
+ ms, then blink off for delay_off ms, leaving the LED normally off. If
+ set to 1, blink off for delay_off ms, then blink on for delay_on ms,
+ leaving the LED normally on.
+ Setting this value also immediately change the LED state.
+
+ shot - write any non-empty string to signal an events, this starts a blink
+ sequence if not already running.
+
+Example use-case: network devices, initialization:
+
+ echo oneshot > trigger # set trigger for this led
+ echo 33 > delay_on # blink at 1 / (33 + 33) Hz on continuous traffic
+ echo 33 > delay_off
+
+interface goes up:
+
+ echo 1 > invert # set led as normally-on, turn the led on
+
+packet received/transmitted:
+
+ echo 1 > shot # led starts blinking, ignored if already blinking
+
+interface goes down
+
+ echo 0 > invert # set led as normally-off, turn the led off
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 12b2b55c519e..54dd1a396fa9 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -443,6 +443,20 @@ config LEDS_TRIGGER_TIMER
If unsure, say Y.
+config LEDS_TRIGGER_ONESHOT
+ tristate "LED One-shot Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to blink in one-shot pulses with parameters
+ controlled via sysfs. It's useful to notify the user on
+ sporadic events, when there are no clear begin and end trap points,
+ or on dense events, where this blinks the LED at constant rate if
+ rearmed continuously.
+
+ It also shows how to use the led_blink_set_oneshot() function.
+
+ If unsure, say Y.
+
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
depends on IDE_GD_ATA
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index f8958cd6cf6e..9112d518f9d4 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_ONESHOT) += ledtrig-oneshot.o
obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
diff --git a/drivers/leds/ledtrig-oneshot.c b/drivers/leds/ledtrig-oneshot.c
new file mode 100644
index 000000000000..5c9edf7f489c
--- /dev/null
+++ b/drivers/leds/ledtrig-oneshot.c
@@ -0,0 +1,204 @@
+/*
+ * One-shot LED Trigger
+ *
+ * Copyright 2012, Fabio Baltieri <fabio.baltieri@gmail.com>
+ *
+ * Based on ledtrig-timer.c by Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+#define DEFAULT_DELAY 100
+
+struct oneshot_trig_data {
+ unsigned int invert;
+};
+
+static ssize_t led_shot(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
+
+ led_blink_set_oneshot(led_cdev,
+ &led_cdev->blink_delay_on, &led_cdev->blink_delay_off,
+ oneshot_data->invert);
+
+ /* content is ignored */
+ return size;
+}
+static ssize_t led_invert_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
+
+ return sprintf(buf, "%u\n", oneshot_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ oneshot_data->invert = !!state;
+
+ if (oneshot_data->invert)
+ led_set_brightness(led_cdev, LED_FULL);
+ else
+ led_set_brightness(led_cdev, LED_OFF);
+
+ return size;
+}
+
+static ssize_t led_delay_on_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
+}
+
+static ssize_t led_delay_on_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ led_cdev->blink_delay_on = state;
+
+ return size;
+}
+static ssize_t led_delay_off_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
+}
+
+static ssize_t led_delay_off_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ unsigned long state;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &state);
+ if (ret)
+ return ret;
+
+ led_cdev->blink_delay_off = state;
+
+ return size;
+}
+
+static DEVICE_ATTR(delay_on, 0644, led_delay_on_show, led_delay_on_store);
+static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+static DEVICE_ATTR(shot, 0200, NULL, led_shot);
+
+static void oneshot_trig_activate(struct led_classdev *led_cdev)
+{
+ struct oneshot_trig_data *oneshot_data;
+ int rc;
+
+ oneshot_data = kzalloc(sizeof(*oneshot_data), GFP_KERNEL);
+ if (!oneshot_data)
+ return;
+
+ led_cdev->trigger_data = oneshot_data;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
+ if (rc)
+ goto err_out_trig_data;
+ rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
+ if (rc)
+ goto err_out_delayon;
+ rc = device_create_file(led_cdev->dev, &dev_attr_invert);
+ if (rc)
+ goto err_out_delayoff;
+ rc = device_create_file(led_cdev->dev, &dev_attr_shot);
+ if (rc)
+ goto err_out_invert;
+
+ led_cdev->blink_delay_on = DEFAULT_DELAY;
+ led_cdev->blink_delay_off = DEFAULT_DELAY;
+
+ led_cdev->activated = true;
+
+ return;
+
+err_out_invert:
+ device_remove_file(led_cdev->dev, &dev_attr_invert);
+err_out_delayoff:
+ device_remove_file(led_cdev->dev, &dev_attr_delay_off);
+err_out_delayon:
+ device_remove_file(led_cdev->dev, &dev_attr_delay_on);
+err_out_trig_data:
+ kfree(led_cdev->trigger_data);
+}
+
+static void oneshot_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
+
+ if (led_cdev->activated) {
+ device_remove_file(led_cdev->dev, &dev_attr_delay_on);
+ device_remove_file(led_cdev->dev, &dev_attr_delay_off);
+ device_remove_file(led_cdev->dev, &dev_attr_invert);
+ device_remove_file(led_cdev->dev, &dev_attr_shot);
+ kfree(oneshot_data);
+ led_cdev->activated = false;
+ }
+
+ /* Stop blinking */
+ led_brightness_set(led_cdev, LED_OFF);
+}
+
+static struct led_trigger oneshot_led_trigger = {
+ .name = "oneshot",
+ .activate = oneshot_trig_activate,
+ .deactivate = oneshot_trig_deactivate,
+};
+
+static int __init oneshot_trig_init(void)
+{
+ return led_trigger_register(&oneshot_led_trigger);
+}
+
+static void __exit oneshot_trig_exit(void)
+{
+ led_trigger_unregister(&oneshot_led_trigger);
+}
+
+module_init(oneshot_trig_init);
+module_exit(oneshot_trig_exit);
+
+MODULE_AUTHOR("Fabio Baltieri <fabio.baltieri@gmail.com>");
+MODULE_DESCRIPTION("One-shot LED trigger");
+MODULE_LICENSE("GPL");