aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--README4
-rw-r--r--drivers/char/ppdev.c6
-rw-r--r--drivers/isdn/hardware/mISDN/mISDNisar.c2
-rw-r--r--drivers/isdn/hisax/amd7930_fn.c2
-rw-r--r--drivers/isdn/hisax/isar.c2
-rw-r--r--drivers/isdn/pcbit/layer2.c2
-rw-r--r--drivers/net/wimax/i2400m/debugfs.c1
-rw-r--r--drivers/target/iscsi/iscsi_target_parameters.c1
-rw-r--r--drivers/tty/hvc/hvc_opal.c2
-rw-r--r--drivers/tty/hvc/hvc_vio.c2
-rw-r--r--drivers/tty/serial/8250/Kconfig2
-rw-r--r--drivers/tty/serial/bfin_uart.c2
-rw-r--r--drivers/tty/serial/icom.c2
-rw-r--r--mm/util.c2
-rw-r--r--net/rfkill/core.c4
-rw-r--r--security/keys/process_keys.c2
16 files changed, 19 insertions, 19 deletions
diff --git a/README b/README
index f32710a817fc..a24ec89ba442 100644
--- a/README
+++ b/README
@@ -180,6 +180,10 @@ CONFIGURING the kernel:
with questions already answered.
Additionally updates the dependencies.
+ "make olddefconfig"
+ Like above, but sets new symbols to their default
+ values without prompting.
+
"make defconfig" Create a ./.config file by using the default
symbol values from either arch/$ARCH/defconfig
or arch/$ARCH/configs/${PLATFORM}_defconfig,
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index d0d824ebf2c1..1cd49241e60e 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -251,12 +251,8 @@ static ssize_t pp_write (struct file * file, const char __user * buf,
break;
}
- if (signal_pending (current)) {
- if (!bytes_written) {
- bytes_written = -EINTR;
- }
+ if (signal_pending (current))
break;
- }
cond_resched();
}
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index 182ecf0626c2..feafa91c2ed9 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -1302,7 +1302,7 @@ modeisar(struct isar_ch *ch, u32 bprotocol)
&ch->is->Flags))
ch->dpath = 1;
else {
- pr_info("modeisar both pathes in use\n");
+ pr_info("modeisar both paths in use\n");
return -EBUSY;
}
if (bprotocol == ISDN_P_B_HDLC)
diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c
index 89342f7e0c5b..525471e776a7 100644
--- a/drivers/isdn/hisax/amd7930_fn.c
+++ b/drivers/isdn/hisax/amd7930_fn.c
@@ -628,7 +628,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg)
if ((cs->dc.amd7930.ph_state == 8)) {
/* b-channels off, PH-AR cleared
* change to F3 */
- Amd7930_ph_command(cs, 0x20, "HW_RESET REQEST"); //LMR1 bit 5
+ Amd7930_ph_command(cs, 0x20, "HW_RESET REQUEST"); //LMR1 bit 5
spin_unlock_irqrestore(&cs->lock, flags);
} else {
Amd7930_ph_command(cs, 0x40, "HW_RESET REQUEST");
diff --git a/drivers/isdn/hisax/isar.c b/drivers/isdn/hisax/isar.c
index ff5e139f4850..7fdf34704fe5 100644
--- a/drivers/isdn/hisax/isar.c
+++ b/drivers/isdn/hisax/isar.c
@@ -1417,7 +1417,7 @@ modeisar(struct BCState *bcs, int mode, int bc)
&bcs->hw.isar.reg->Flags))
bcs->hw.isar.dpath = 1;
else {
- printk(KERN_WARNING"isar modeisar both pathes in use\n");
+ printk(KERN_WARNING"isar modeisar both paths in use\n");
return (1);
}
break;
diff --git a/drivers/isdn/pcbit/layer2.c b/drivers/isdn/pcbit/layer2.c
index a18e639b40d7..42ecfef80132 100644
--- a/drivers/isdn/pcbit/layer2.c
+++ b/drivers/isdn/pcbit/layer2.c
@@ -508,7 +508,7 @@ pcbit_irq_handler(int interrupt, void *devptr)
return IRQ_NONE;
}
if (dev->interrupt) {
- printk(KERN_DEBUG "pcbit: reentering interrupt hander\n");
+ printk(KERN_DEBUG "pcbit: reentering interrupt handler\n");
return IRQ_HANDLED;
}
dev->interrupt = 1;
diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c
index 4b66ab1d0e5c..6702da838b0e 100644
--- a/drivers/net/wimax/i2400m/debugfs.c
+++ b/drivers/net/wimax/i2400m/debugfs.c
@@ -209,6 +209,7 @@ int debugfs_i2400m_reset_set(void *data, u64 val)
result = i2400m_reset(i2400m, rt);
if (result >= 0)
result = 0;
+ break;
default:
result = -EINVAL;
}
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 90b740048f26..1bf7432bfcbc 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -1432,6 +1432,7 @@ static struct iscsi_param *iscsi_check_key(
break;
case PHASE_OPERATIONAL:
pr_debug("Operational phase.\n");
+ break;
default:
pr_debug("Unknown phase.\n");
}
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 0d2ea0c224c3..a4f488fa9579 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -178,7 +178,7 @@ static int __devinit hvc_opal_probe(struct platform_device *dev)
proto = HV_PROTOCOL_HVSI;
ops = &hvc_opal_hvsi_ops;
} else {
- pr_err("hvc_opal: Unkown protocol for %s\n",
+ pr_err("hvc_opal: Unknown protocol for %s\n",
dev->dev.of_node->full_name);
return -ENXIO;
}
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 070c0ee68642..1a5894c6dfa4 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -313,7 +313,7 @@ static int __devinit hvc_vio_probe(struct vio_dev *vdev,
proto = HV_PROTOCOL_HVSI;
ops = &hvterm_hvsi_ops;
} else {
- pr_err("hvc_vio: Unkown protocol for %s\n", vdev->dev.of_node->full_name);
+ pr_err("hvc_vio: Unknown protocol for %s\n", vdev->dev.of_node->full_name);
return -ENXIO;
}
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index f3d283f2e3aa..c31133a6ea8e 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -271,7 +271,7 @@ config SERIAL_8250_DW
present in the Synopsys DesignWare APB UART.
config SERIAL_8250_EM
- tristate "Support for Emma Mobile intergrated serial port"
+ tristate "Support for Emma Mobile integrated serial port"
depends on SERIAL_8250 && ARM && HAVE_CLK
help
Selecting this option will add support for the integrated serial
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 9242d56ba267..9b11c3f23eae 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -815,7 +815,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
lcr = WLS(5);
break;
default:
- printk(KERN_ERR "%s: word lengh not supported\n",
+ printk(KERN_ERR "%s: word length not supported\n",
__func__);
}
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index defc4e3393a3..613151677df0 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -505,7 +505,7 @@ static void load_code(struct icom_port *icom_port)
/* Stop processor */
stop_processor(icom_port);
- dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n");
+ dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n");
}
if (new_page != NULL)
diff --git a/mm/util.c b/mm/util.c
index dc3036cdcc6a..c55e26b17d93 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -152,7 +152,7 @@ EXPORT_SYMBOL(__krealloc);
*
* The contents of the object pointed to are preserved up to the
* lesser of the new and old sizes. If @p is %NULL, krealloc()
- * behaves exactly like kmalloc(). If @size is 0 and @p is not a
+ * behaves exactly like kmalloc(). If @new_size is 0 and @p is not a
* %NULL pointer, the object pointed to is freed.
*/
void *krealloc(const void *p, size_t new_size, gfp_t flags)
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index a5c952741279..9b9be5279f5d 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -676,7 +676,7 @@ static ssize_t rfkill_soft_store(struct device *dev,
rfkill_set_block(rfkill, state);
mutex_unlock(&rfkill_global_mutex);
- return err ?: count;
+ return count;
}
static u8 user_state_from_blocked(unsigned long state)
@@ -721,7 +721,7 @@ static ssize_t rfkill_state_store(struct device *dev,
rfkill_set_block(rfkill, state == RFKILL_USER_STATE_SOFT_BLOCKED);
mutex_unlock(&rfkill_global_mutex);
- return err ?: count;
+ return count;
}
static ssize_t rfkill_claim_show(struct device *dev,
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index a58f712605d8..86468f385fc8 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -358,8 +358,6 @@ key_ref_t search_my_process_keyrings(struct key_type *type,
switch (PTR_ERR(key_ref)) {
case -EAGAIN: /* no key */
- if (ret)
- break;
case -ENOKEY: /* negative key */
ret = key_ref;
break;
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 22:37:53 +0000