diff options
59 files changed, 401 insertions, 159 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 0a96e80d4515..4e41d5255d72 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7271,7 +7271,7 @@ WATCHDOG DEVICE DRIVERS M: Wim Van Sebroeck <wim@iguana.be> L: linux-watchdog@vger.kernel.org W: http://www.linux-watchdog.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git +T: git git://www.linux-watchdog.org/linux-watchdog.git S: Maintained F: Documentation/watchdog/ F: drivers/watchdog/ diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h index 2667f52e3b04..9e3b90df32e1 100644 --- a/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h @@ -61,7 +61,7 @@ */ #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) -#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) +#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 4eae566dfdc7..c74de01ab5b6 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_pin_regs, .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, }, + [IRQ_LPC32XX_GPI_28] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT, + }, [IRQ_LPC32XX_GPIO_00] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, @@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) if (state) eventreg |= lpc32xx_events[d->irq].mask; - else + else { eventreg &= ~lpc32xx_events[d->irq].mask; + /* + * When disabling the wakeup, clear the latched + * event + */ + __raw_writel(lpc32xx_events[d->irq].mask, + lpc32xx_events[d->irq]. + event_group->rawstat_reg); + } + __raw_writel(eventreg, lpc32xx_events[d->irq].event_group->enab_reg); @@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void) /* Setup SIC1 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); /* Setup SIC2 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); /* Configure supported IRQ's */ for (i = 0; i < NR_IRQS; i++) { diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 429cfdbb2b3d..f2735281616a 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -88,6 +88,7 @@ struct uartinit { char *uart_ck_name; u32 ck_mode_mask; void __iomem *pdiv_clk_reg; + resource_size_t mapbase; }; static struct uartinit uartinit_data[] __initdata = { @@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, + .mapbase = LPC32XX_UART5_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT @@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, + .mapbase = LPC32XX_UART3_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT @@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, + .mapbase = LPC32XX_UART4_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT @@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, + .mapbase = LPC32XX_UART6_BASE, }, #endif }; @@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void) /* pre-UART clock divider set to 1 */ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); + + /* + * Force a flush of the RX FIFOs to work around a + * HW bug + */ + puart = uartinit_data[i].mapbase; + __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); + __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); + j = LPC32XX_SUART_FIFO_SIZE; + while (j--) + tmp = __raw_readl( + LPC32XX_UART_DLL_FIFO(puart)); + __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } /* This needs to be done after all UART clocks are setup */ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); - for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { + for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ puart = serial_std_platform_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 17cb76060125..3588a5584153 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 7bc17eaa12eb..ada1213982b4 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -24,7 +24,6 @@ #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> -#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <mach/pxa168.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 8e3b5af04a57..bc97170125bf 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369ea6978..be2002f42dea 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -416,13 +416,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + innovator_config[0].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + innovator_config[0].data = &innovator1610_lcd_config; } #endif omap_board_config = innovator_config; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index d965da45160e..e20c8ab80b0e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING going on could result in system crashes; config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" - depends on ARCH_OMAP4 && BROKEN + bool "OMAP4 errata: Async Bridge Corruption" + depends on ARCH_OMAP4 select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 42a4d11fad23..672262717601 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; +#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); +#else + pr_warn("MMC: notify cover event not available\n"); +#endif } static int n8x0_mmc_late_init(struct device *dev) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c775bead1497..c877236a8442 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; platform_device_register(&leds_gpio); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index febffde2ff10..7e9338e8d684 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -132,6 +132,7 @@ void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); void ti81xx_map_io(void); +void omap_barriers_init(void); /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index cfdbb86bc84e..72e018b9b260 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; int idle_time; - int new_state_idx; int cpu_id = smp_processor_id(); /* Used to keep track of the total time in idle */ @@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev, */ cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { - new_state_idx = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); + index = drv->safe_state_index; + cx = cpuidle_get_statedata(&dev->states_usage[index]); } if (index > 0) diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 997033129d26..bbb870c04a5e 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> @@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +/* Generic regulator definition to satisfy smsc911x */ +static struct regulator_init_data gpmc_smsc911x_reg_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), + .consumer_supplies = gpmc_smsc911x_supply, +}; + +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { + .supply_name = "gpmc_smsc911x", + .microvolts = 3300000, + .gpio = -EINVAL, + .startup_delay = 0, + .enable_high = 0, + .enabled_at_boot = 1, + .init_data = &gpmc_smsc911x_reg_init_data, +}; + +/* + * Platform device id of 42 is a temporary fix to avoid conflicts + * with other reg-fixed-voltage devices. The real fix should + * involve the driver core providing a way of dynamically + * assigning a unique id on registration for platform devices + * in the same name space. + */ +static struct platform_device gpmc_smsc911x_regulator = { + .name = "reg-fixed-voltage", + .id = 42, + .dev = { + .platform_data = &gpmc_smsc911x_fixed_reg_data, + }, +}; + /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", ret); + return; + } + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b40c28895298..19dd1657245c 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return 0; } +static int omap_hsmmc_done; #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) @@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; + if (omap_hsmmc_done) + return; + + omap_hsmmc_done = 1; + if (!cpu_is_omap44xx()) { if (cpu_is_omap2430()) { control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index eb50c29fb644..fb11b44fbdec 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); + omap_barriers_init(); } #endif diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index a6db1e4f7b6e..2cc1aa004b94 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_iva_priv, }; +#endif -struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; +#ifdef CONFIG_ARCH_OMAP2 +struct omap_mbox *omap2_mboxes[] = { + &mbox_dsp_info, +#ifdef CONFIG_SOC_OMAP2420 + &mbox_iva_info, +#endif + NULL +}; #endif #if defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fb8bc9fa43b1..611a0e3d54ca 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init +static int omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 40a8fbc07e4b..ebc595091312 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -24,6 +24,7 @@ #include <plat/irqs.h> #include <plat/sram.h> +#include <plat/omap-secure.h> #include <mach/hardware.h> #include <mach/omap-wakeupgen.h> @@ -43,6 +44,9 @@ static void __iomem *sar_ram_base; void __iomem *dram_sync, *sram_sync; +static phys_addr_t paddr; +static u32 size; + void omap_bus_sync(void) { if (dram_sync && sram_sync) { @@ -52,18 +56,20 @@ void omap_bus_sync(void) } } -static int __init omap_barriers_init(void) +/* Steal one page physical memory for barrier implementation */ +int __init omap_barrier_reserve_memblock(void) { - struct map_desc dram_io_desc[1]; - phys_addr_t paddr; - u32 size; - - if (!cpu_is_omap44xx()) - return -ENODEV; size = ALIGN(PAGE_SIZE, SZ_1M); paddr = arm_memblock_steal(size, SZ_1M); + return 0; +} + +void __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; @@ -75,9 +81,10 @@ static int __init omap_barriers_init(void) pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", (long long) paddr, dram_io_desc[0].virtual); - return 0; } -core_initcall(omap_barriers_init); +#else +void __init omap_barriers_init(void) +{} #endif void __init gic_init_irq(void) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1881fe915149..5a65dd04aa38 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, freq = clk->rate; clk_put(clk); + rcu_read_lock(); opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); + rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 771dc781b746..f51348dafafd 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { struct omap_hwmod *oh[2]; - struct omap_device *od; + struct platform_device *pdev; int bus_id = -1; int i; @@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) return; } - od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, (void *)&usbhs_data, sizeof(usbhs_data), omap_uhhtll_latency, ARRAY_SIZE(omap_uhhtll_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s,%s\n", USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); return; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index fb9b62dcf4ca..208eef1c0485 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -45,6 +45,7 @@ #include <mach/hx4700.h> #include <mach/irda.h> +#include <sound/ak4641.h> #include <video/platform_lcd.h> #include <video/w100fb.h> @@ -765,6 +766,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = { }; /* + * Asahi Kasei AK4641 on I2C + */ + +static struct ak4641_platform_data ak4641_info = { + .gpio_power = GPIO27_HX4700_CODEC_ON, + .gpio_npdn = GPIO109_HX4700_CODEC_nPDN, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("ak4641", 0x12), + .platform_data = &ak4641_info, + }, +}; + +static struct platform_device audio = { + .name = "hx4700-audio", + .id = -1, +}; + + +/* * PCMCIA */ @@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = { &gpio_vbus, &power_supply, &strataflash, + &audio, &pcmcia, }; @@ -827,6 +851,7 @@ static void __init hx4700_init(void) pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info)); i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 91e4f6c03766..00d6eacab8e4 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,7 +25,6 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aed6cbcf3866..c1673b3441d4 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index febc809ed5a6..5aded5e6148f 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -15,7 +15,6 @@ #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 8d5168d253a9..30989baf7f2a 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = { #define MAXCTRL_SEL_SH 4 #define MAXCTRL_STR (1u << 7) +extern int max1111_read_channel(int); /* * Read MAX1111 ADC */ @@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel) if (machine_is_tosa()) return 0; - extern int max1111_read_channel(int); - /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 34cbdac51525..438f02fe122a 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { unsigned long ret; - ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT) << GPIO_bit(SPITZ_GPIO_KEY_INT)) - | (!gpio_get_value(SPITZ_GPIO_SYNC) - << GPIO_bit(SPITZ_GPIO_SYNC)); + | gpio_get_value(SPITZ_GPIO_SYNC)); return ret; } diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 06383b51e655..4de7d1e79e73 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -69,6 +69,7 @@ void __init omap_reserve(void) omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } void __init omap_init_consistent_dma_size(void) diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 3047ff923a63..8c7994ce9869 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void) { } #endif +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __OMAP_SECURE_H__ */ diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index d1727584230a..6d99a5fcc090 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -227,6 +227,9 @@ config COMPAT config SYSVIPC_COMPAT def_bool y if COMPAT && SYSVIPC +config KEYS_COMPAT + def_bool y if COMPAT && KEYS + config AUDIT_ARCH def_bool y diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index 39f8fd4438fc..c383ce440d99 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/gfp.h> #include <linux/slab.h> -#include <linux/crash_dump.h> #include <linux/bootmem.h> #include <linux/elf.h> #include <asm/ipl.h> diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 5d633019d8f3..50236610de83 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -223,16 +223,38 @@ void free_initrd_mem(unsigned long start, unsigned long end) #ifdef CONFIG_MEMORY_HOTPLUG int arch_add_memory(int nid, u64 start, u64 size) { - struct pglist_data *pgdat; + unsigned long zone_start_pfn, zone_end_pfn, nr_pages; + unsigned long start_pfn = PFN_DOWN(start); + unsigned long size_pages = PFN_DOWN(size); struct zone *zone; int rc; - pgdat = NODE_DATA(nid); - zone = pgdat->node_zones + ZONE_MOVABLE; rc = vmem_add_mapping(start, size); if (rc) return rc; - rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size)); + for_each_zone(zone) { + if (zone_idx(zone) != ZONE_MOVABLE) { + /* Add range within existing zone limits */ + zone_start_pfn = zone->zone_start_pfn; + zone_end_pfn = zone->zone_start_pfn + + zone->spanned_pages; + } else { + /* Add remaining range to ZONE_MOVABLE */ + zone_start_pfn = start_pfn; + zone_end_pfn = start_pfn + size_pages; + } + if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn) + continue; + nr_pages = (start_pfn + size_pages > zone_end_pfn) ? + zone_end_pfn - start_pfn : size_pages; + rc = __add_pages(nid, zone, start_pfn, nr_pages); + if (rc) + break; + start_pfn += nr_pages; + size_pages -= nr_pages; + if (!size_pages) + break; + } if (rc) vmem_remove_mapping(start, size); return rc; diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index d620b0784257..618bd4d87d28 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -28,6 +28,7 @@ #include "drmP.h" #include "drm_crtc_helper.h" +#include <drm/exynos_drm.h> #include "exynos_drm_drv.h" #include "exynos_drm_encoder.h" @@ -44,8 +45,9 @@ struct exynos_drm_connector { /* convert exynos_video_timings to drm_display_mode */ static inline void convert_to_display_mode(struct drm_display_mode *mode, - struct fb_videomode *timing) + struct exynos_drm_panel_info *panel) { + struct fb_videomode *timing = &panel->timing; DRM_DEBUG_KMS("%s\n", __FILE__); mode->clock = timing->pixclock / 1000; @@ -60,6 +62,8 @@ convert_to_display_mode(struct drm_display_mode *mode, mode->vsync_start = mode->vdisplay + timing->upper_margin; mode->vsync_end = mode->vsync_start + timing->vsync_len; mode->vtotal = mode->vsync_end + timing->lower_margin; + mode->width_mm = panel->width_mm; + mode->height_mm = panel->height_mm; if (timing->vmode & FB_VMODE_INTERLACED) mode->flags |= DRM_MODE_FLAG_INTERLACE; @@ -148,16 +152,18 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) connector->display_info.raw_edid = edid; } else { struct drm_display_mode *mode = drm_mode_create(connector->dev); - struct fb_videomode *timing; + struct exynos_drm_panel_info *panel; - if (display_ops->get_timing) - timing = display_ops->get_timing(manager->dev); + if (display_ops->get_panel) + panel = display_ops->get_panel(manager->dev); else { drm_mode_destroy(connector->dev, mode); return 0; } - convert_to_display_mode(mode, timing); + convert_to_display_mode(mode, panel); + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; drm_mode_set_name(mode); diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index e685e1e33055..13540de90bfc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -136,7 +136,7 @@ struct exynos_drm_overlay { * @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI. * @is_connected: check for that display is connected or not. * @get_edid: get edid modes from display driver. - * @get_timing: get timing object from display driver. + * @get_panel: get panel object from display driver. * @check_timing: check if timing is valid or not. * @power_on: display device on or off. */ @@ -145,7 +145,7 @@ struct exynos_drm_display_ops { bool (*is_connected)(struct device *dev); int (*get_edid)(struct device *dev, struct drm_connector *connector, u8 *edid, int len); - void *(*get_timing)(struct device *dev); + void *(*get_panel)(struct device *dev); int (*check_timing)(struct device *dev, void *timing); int (*power_on)(struct device *dev, int mode); }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 0dbb32bb18a3..360adf2bba04 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -89,7 +89,7 @@ struct fimd_context { bool suspended; struct mutex lock; - struct fb_videomode *timing; + struct exynos_drm_panel_info *panel; }; static bool fimd_display_is_connected(struct device *dev) @@ -101,13 +101,13 @@ static bool fimd_display_is_connected(struct device *dev) return true; } -static void *fimd_get_timing(struct device *dev) +static void *fimd_get_panel(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); DRM_DEBUG_KMS("%s\n", __FILE__); - return ctx->timing; + return ctx->panel; } static int fimd_check_timing(struct device *dev, void *timing) @@ -131,7 +131,7 @@ static int fimd_display_power_on(struct device *dev, int mode) static struct exynos_drm_display_ops fimd_display_ops = { .type = EXYNOS_DISPLAY_TYPE_LCD, .is_connected = fimd_display_is_connected, - .get_timing = fimd_get_timing, + .get_panel = fimd_get_panel, .check_timing = fimd_check_timing, .power_on = fimd_display_power_on, }; @@ -193,7 +193,8 @@ static void fimd_apply(struct device *subdrv_dev) static void fimd_commit(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); - struct fb_videomode *timing = ctx->timing; + struct exynos_drm_panel_info *panel = ctx->panel; + struct fb_videomode *timing = &panel->timing; u32 val; if (ctx->suspended) @@ -786,7 +787,7 @@ static int __devinit fimd_probe(struct platform_device *pdev) struct fimd_context *ctx; struct exynos_drm_subdrv *subdrv; struct exynos_drm_fimd_pdata *pdata; - struct fb_videomode *timing; + struct exynos_drm_panel_info *panel; struct resource *res; int win; int ret = -EINVAL; @@ -799,9 +800,9 @@ static int __devinit fimd_probe(struct platform_device *pdev) return -EINVAL; } - timing = &pdata->timing; - if (!timing) { - dev_err(dev, "timing is null.\n"); + panel = &pdata->panel; + if (!panel) { + dev_err(dev, "panel is null.\n"); return -EINVAL; } @@ -863,16 +864,16 @@ static int __devinit fimd_probe(struct platform_device *pdev) goto err_req_irq; } - ctx->clkdiv = fimd_calc_clkdiv(ctx, timing); + ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing); ctx->vidcon0 = pdata->vidcon0; ctx->vidcon1 = pdata->vidcon1; ctx->default_win = pdata->default_win; - ctx->timing = timing; + ctx->panel = panel; - timing->pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv; + panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv; DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n", - timing->pixclock, ctx->clkdiv); + panel->timing.pixclock, ctx->clkdiv); subdrv = &ctx->subdrv; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f425b23e3803..f851db7be2cc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4680,8 +4680,17 @@ sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane, crtc = intel_get_crtc_for_plane(dev, plane); clock = crtc->mode.clock; + if (!clock) { + *sprite_wm = 0; + return false; + } line_time_us = (sprite_width * 1000) / clock; + if (!line_time_us) { + *sprite_wm = 0; + return false; + } + line_count = (latency_ns / line_time_us + 1000) / 1000; line_size = sprite_width * pixel_size; @@ -6175,7 +6184,7 @@ void intel_crtc_load_lut(struct drm_crtc *crtc) int i; /* The clocks have to be on to load the palette. */ - if (!crtc->enabled) + if (!crtc->enabled || !intel_crtc->active) return; /* use legacy palette for Ironlake */ @@ -6561,7 +6570,7 @@ intel_framebuffer_create_for_mode(struct drm_device *dev, mode_cmd.height = mode->vdisplay; mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width, bpp); - mode_cmd.pixel_format = 0; + mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); return intel_framebuffer_create(dev, &mode_cmd, obj); } @@ -8185,7 +8194,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) if (intel_enable_rc6(dev_priv->dev)) rc6_mask = GEN6_RC_CTL_RC6_ENABLE | - (IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0; + ((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0); I915_WRITE(GEN6_RC_CONTROL, rc6_mask | diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 1ab842c6032e..536191540b03 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -301,7 +301,7 @@ static int init_ring_common(struct intel_ring_buffer *ring) I915_WRITE_CTL(ring, ((ring->size - PAGE_SIZE) & RING_NR_PAGES) - | RING_REPORT_64K | RING_VALID); + | RING_VALID); /* If the head is still not zero, the ring is dead */ if ((I915_READ_CTL(ring) & RING_VALID) == 0 || @@ -1132,18 +1132,6 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n) struct drm_device *dev = ring->dev; struct drm_i915_private *dev_priv = dev->dev_private; unsigned long end; - u32 head; - - /* If the reported head position has wrapped or hasn't advanced, - * fallback to the slow and accurate path. - */ - head = intel_read_status_page(ring, 4); - if (head > ring->head) { - ring->head = head; - ring->space = ring_space(ring); - if (ring->space >= n) - return 0; - } trace_i915_ring_wait_begin(ring); if (drm_core_check_feature(dev, DRIVER_GEM)) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 38ce5d0427e3..387fcc9f03ef 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -1304,6 +1304,7 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, h0 = G_038004_TEX_HEIGHT(word1) + 1; d0 = G_038004_TEX_DEPTH(word1); nfaces = 1; + array = 0; switch (G_038000_DIM(word0)) { case V_038000_SQ_TEX_DIM_1D: case V_038000_SQ_TEX_DIM_2D: diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e7cb3ab09243..8b3d8ed52ff6 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1117,13 +1117,23 @@ static int radeon_dp_get_modes(struct drm_connector *connector) (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) { struct drm_display_mode *mode; - if (!radeon_dig_connector->edp_on) - atombios_set_edp_panel_power(connector, - ATOM_TRANSMITTER_ACTION_POWER_ON); - ret = radeon_ddc_get_modes(radeon_connector); - if (!radeon_dig_connector->edp_on) - atombios_set_edp_panel_power(connector, - ATOM_TRANSMITTER_ACTION_POWER_OFF); + if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + if (!radeon_dig_connector->edp_on) + atombios_set_edp_panel_power(connector, + ATOM_TRANSMITTER_ACTION_POWER_ON); + ret = radeon_ddc_get_modes(radeon_connector); + if (!radeon_dig_connector->edp_on) + atombios_set_edp_panel_power(connector, + ATOM_TRANSMITTER_ACTION_POWER_OFF); + } else { + /* need to setup ddc on the bridge */ + if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) != + ENCODER_OBJECT_ID_NONE) { + if (encoder) + radeon_atom_ext_encoder_setup_ddc(encoder); + } + ret = radeon_ddc_get_modes(radeon_connector); + } if (ret > 0) { if (encoder) { @@ -1134,7 +1144,6 @@ static int radeon_dp_get_modes(struct drm_connector *connector) return ret; } - encoder = radeon_best_single_encoder(connector); if (!encoder) return 0; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 010dad8b66ae..c58a036233fb 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -597,13 +597,13 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev, if (bo_va == NULL) return 0; - list_del(&bo_va->bo_list); mutex_lock(&vm->mutex); radeon_mutex_lock(&rdev->cs_mutex); radeon_vm_bo_update_pte(rdev, vm, bo, NULL); radeon_mutex_unlock(&rdev->cs_mutex); list_del(&bo_va->vm_list); mutex_unlock(&vm->mutex); + list_del(&bo_va->bo_list); kfree(bo_va); return 0; diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 7e78f7c87857..3d471d56bf15 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -72,6 +72,7 @@ #define MXS_I2C_QUEUESTAT (0x70) #define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 +#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F #define MXS_I2C_QUEUECMD (0x80) @@ -219,14 +220,14 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int ret; int flags; - init_completion(&i2c->cmd_complete); - dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", msg->addr, msg->len, msg->flags, stop); if (msg->len == 0) return -EINVAL; + init_completion(&i2c->cmd_complete); + flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; if (msg->flags & I2C_M_RD) @@ -286,6 +287,7 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) { struct mxs_i2c_dev *i2c = dev_id; u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; + bool is_last_cmd; if (!stat) return IRQ_NONE; @@ -300,9 +302,14 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) else i2c->cmd_err = 0; - complete(&i2c->cmd_complete); + is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & + MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; + + if (is_last_cmd || i2c->cmd_err) + complete(&i2c->cmd_complete); writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); + return IRQ_HANDLED; } diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index a87e2728b2c3..64d433ec4fc6 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -328,21 +328,15 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) goto err1; } - if (ret) { - while (--i >= 0) - soc_pcmcia_remove_one(&sinfo->skt[i]); - kfree(sinfo); - clk_put(clk); - } else { - pxa2xx_configure_sockets(&dev->dev); - dev_set_drvdata(&dev->dev, sinfo); - } + pxa2xx_configure_sockets(&dev->dev); + dev_set_drvdata(&dev->dev, sinfo); return 0; err1: while (--i >= 0) soc_pcmcia_remove_one(&sinfo->skt[i]); + clk_put(clk); kfree(sinfo); err0: return ret; diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index df33530cec4a..28b81ae4cf7f 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -196,7 +196,7 @@ static const unsigned int LDO12_suspend_table[] = { }; static const unsigned int LDO13_table[] = { - 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0, 0, + 1200000, 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0, }; static const unsigned int LDO13_suspend_table[] = { @@ -389,10 +389,10 @@ static struct pm8607_regulator_info pm8607_regulator_info[] = { PM8607_LDO( 7, LDO7, 0, 3, SUPPLIES_EN12, 1), PM8607_LDO( 8, LDO8, 0, 3, SUPPLIES_EN12, 2), PM8607_LDO( 9, LDO9, 0, 3, SUPPLIES_EN12, 3), - PM8607_LDO(10, LDO10, 0, 3, SUPPLIES_EN12, 4), + PM8607_LDO(10, LDO10, 0, 4, SUPPLIES_EN12, 4), PM8607_LDO(12, LDO12, 0, 4, SUPPLIES_EN12, 5), PM8607_LDO(13, VIBRATOR_SET, 1, 3, VIBRATOR_SET, 0), - PM8607_LDO(14, LDO14, 0, 4, SUPPLIES_EN12, 6), + PM8607_LDO(14, LDO14, 0, 3, SUPPLIES_EN12, 6), }; static int __devinit pm8607_regulator_probe(struct platform_device *pdev) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 95aeedf198f8..958e5129c601 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -367,29 +367,45 @@ static void __devexit virtballoon_remove(struct virtio_device *vdev) #ifdef CONFIG_PM static int virtballoon_freeze(struct virtio_device *vdev) { + struct virtio_balloon *vb = vdev->priv; + /* * The kthread is already frozen by the PM core before this * function is called. */ + while (vb->num_pages) + leak_balloon(vb, vb->num_pages); + update_balloon_size(vb); + /* Ensure we don't get any more requests from the host */ vdev->config->reset(vdev); vdev->config->del_vqs(vdev); return 0; } +static int restore_common(struct virtio_device *vdev) +{ + struct virtio_balloon *vb = vdev->priv; + int ret; + + ret = init_vqs(vdev->priv); + if (ret) + return ret; + + fill_balloon(vb, towards_target(vb)); + update_balloon_size(vb); + return 0; +} + static int virtballoon_thaw(struct virtio_device *vdev) { - return init_vqs(vdev->priv); + return restore_common(vdev); } static int virtballoon_restore(struct virtio_device *vdev) { struct virtio_balloon *vb = vdev->priv; - struct page *page, *page2; - - /* We're starting from a clean slate */ - vb->num_pages = 0; /* * If a request wasn't complete at the time of freezing, this @@ -397,12 +413,7 @@ static int virtballoon_restore(struct virtio_device *vdev) */ vb->need_stats_update = 0; - /* We don't have these pages in the balloon anymore! */ - list_for_each_entry_safe(page, page2, &vb->pages, lru) { - list_del(&page->lru); - totalram_pages++; - } - return init_vqs(vdev->priv); + return restore_common(vdev); } #endif diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 877b107f77a7..df9e8f0e327d 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1098,7 +1098,7 @@ config BOOKE_WDT_DEFAULT_TIMEOUT For Freescale Book-E processors, this is a number between 0 and 63. For other Book-E processors, this is a number between 0 and 3. - The value can be overidden by the wdt_period command-line parameter. + The value can be overridden by the wdt_period command-line parameter. # PPC64 Architecture diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 337265b47305..7c0fdfca2646 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -198,9 +198,13 @@ static long booke_wdt_ioctl(struct file *file, booke_wdt_period = tmp; #endif booke_wdt_set(); - return 0; + /* Fall */ case WDIOC_GETTIMEOUT: +#ifdef CONFIG_FSL_BOOKE + return put_user(period_to_sec(booke_wdt_period), p); +#else return put_user(booke_wdt_period, p); +#endif default: return -ENOTTY; } diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 8464ea1c36a1..3c166d3f4e55 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -231,7 +231,7 @@ static int __devinit cru_detect(unsigned long map_entry, cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE; - set_memory_x((unsigned long)bios32_entrypoint, (2 * PAGE_SIZE)); + set_memory_x((unsigned long)bios32_map, 2); asminline_call(&cmn_regs, bios32_entrypoint); if (cmn_regs.u1.ral != 0) { @@ -250,7 +250,8 @@ static int __devinit cru_detect(unsigned long map_entry, cru_rom_addr = ioremap(cru_physical_address, cru_length); if (cru_rom_addr) { - set_memory_x((unsigned long)cru_rom_addr, cru_length); + set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, + (cru_length + PAGE_SIZE - 1) >> PAGE_SHIFT); retval = 0; } } diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 8e210aafdfd0..dfae030a7ef2 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -264,7 +264,7 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev) wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (wdt_mem == NULL) { printk(KERN_INFO MODULE_NAME - "failed to get memory region resouce\n"); + "failed to get memory region resource\n"); return -ENOENT; } diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 4bc3744e14e4..404172f02c9b 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -312,18 +312,26 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) dev = &pdev->dev; wdt_dev = &pdev->dev; - /* get the memory region for the watchdog timer */ - wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (wdt_mem == NULL) { dev_err(dev, "no memory resource specified\n"); return -ENOENT; } + wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (wdt_irq == NULL) { + dev_err(dev, "no irq resource specified\n"); + ret = -ENOENT; + goto err; + } + + /* get the memory region for the watchdog timer */ + size = resource_size(wdt_mem); if (!request_mem_region(wdt_mem->start, size, pdev->name)) { dev_err(dev, "failed to get memory region\n"); - return -EBUSY; + ret = -EBUSY; + goto err; } wdt_base = ioremap(wdt_mem->start, size); @@ -335,29 +343,17 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) DBG("probe: mapped wdt_base=%p\n", wdt_base); - wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (wdt_irq == NULL) { - dev_err(dev, "no irq resource specified\n"); - ret = -ENOENT; - goto err_map; - } - - ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev); - if (ret != 0) { - dev_err(dev, "failed to install irq (%d)\n", ret); - goto err_map; - } - wdt_clock = clk_get(&pdev->dev, "watchdog"); if (IS_ERR(wdt_clock)) { dev_err(dev, "failed to find watchdog clock source\n"); ret = PTR_ERR(wdt_clock); - goto err_irq; + goto err_map; } clk_enable(wdt_clock); - if (s3c2410wdt_cpufreq_register() < 0) { + ret = s3c2410wdt_cpufreq_register(); + if (ret < 0) { printk(KERN_ERR PFX "failed to register cpufreq\n"); goto err_clk; } @@ -378,12 +374,18 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) "cannot start\n"); } + ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev); + if (ret != 0) { + dev_err(dev, "failed to install irq (%d)\n", ret); + goto err_cpufreq; + } + watchdog_set_nowayout(&s3c2410_wdd, nowayout); ret = watchdog_register_device(&s3c2410_wdd); if (ret) { dev_err(dev, "cannot register watchdog (%d)\n", ret); - goto err_cpufreq; + goto err_irq; } if (tmr_atboot && started == 0) { @@ -408,23 +410,26 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) return 0; + err_irq: + free_irq(wdt_irq->start, pdev); + err_cpufreq: s3c2410wdt_cpufreq_deregister(); err_clk: clk_disable(wdt_clock); clk_put(wdt_clock); - - err_irq: - free_irq(wdt_irq->start, pdev); + wdt_clock = NULL; err_map: iounmap(wdt_base); err_req: release_mem_region(wdt_mem->start, size); - wdt_mem = NULL; + err: + wdt_irq = NULL; + wdt_mem = NULL; return ret; } @@ -432,18 +437,18 @@ static int __devexit s3c2410wdt_remove(struct platform_device *dev) { watchdog_unregister_device(&s3c2410_wdd); + free_irq(wdt_irq->start, dev); + s3c2410wdt_cpufreq_deregister(); clk_disable(wdt_clock); clk_put(wdt_clock); wdt_clock = NULL; - free_irq(wdt_irq->start, dev); - wdt_irq = NULL; - iounmap(wdt_base); release_mem_region(wdt_mem->start, resource_size(wdt_mem)); + wdt_irq = NULL; wdt_mem = NULL; return 0; } diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index bcb884e2d613..07d096c49920 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1421,7 +1421,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t, for (i = 1; i < view->n; ++i) { const struct user_regset *regset = &view->regsets[i]; do_thread_regset_writeback(t->task, regset); - if (regset->core_note_type && + if (regset->core_note_type && regset->get && (!regset->active || regset->active(t->task, regset))) { int ret; size_t size = regset->n * regset->size; diff --git a/include/drm/Kbuild b/include/drm/Kbuild index a5c0e10fd47d..1e38a19d68f6 100644 --- a/include/drm/Kbuild +++ b/include/drm/Kbuild @@ -2,6 +2,7 @@ header-y += drm.h header-y += drm_fourcc.h header-y += drm_mode.h header-y += drm_sarea.h +header-y += exynos_drm.h header-y += i810_drm.h header-y += i915_drm.h header-y += mga_drm.h diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 5e120f1c5cd9..1ed3aae893a5 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -97,15 +97,30 @@ struct drm_exynos_plane_set_zpos { #define DRM_IOCTL_EXYNOS_PLANE_SET_ZPOS DRM_IOWR(DRM_COMMAND_BASE + \ DRM_EXYNOS_PLANE_SET_ZPOS, struct drm_exynos_plane_set_zpos) +#ifdef __KERNEL__ + /** - * Platform Specific Structure for DRM based FIMD. + * A structure for lcd panel information. * * @timing: default video mode for initializing + * @width_mm: physical size of lcd width. + * @height_mm: physical size of lcd height. + */ +struct exynos_drm_panel_info { + struct fb_videomode timing; + u32 width_mm; + u32 height_mm; +}; + +/** + * Platform Specific Structure for DRM based FIMD. + * + * @panel: default panel info for initializing * @default_win: default window layer number to be used for UI. * @bpp: default bit per pixel. */ struct exynos_drm_fimd_pdata { - struct fb_videomode timing; + struct exynos_drm_panel_info panel; u32 vidcon0; u32 vidcon1; unsigned int default_win; @@ -139,4 +154,5 @@ struct exynos_drm_hdmi_pdata { unsigned int bpp; }; -#endif +#endif /* __KERNEL__ */ +#endif /* _EXYNOS_DRM_H_ */ diff --git a/include/linux/regset.h b/include/linux/regset.h index 8abee6556223..686f37327a49 100644 --- a/include/linux/regset.h +++ b/include/linux/regset.h @@ -335,8 +335,11 @@ static inline int copy_regset_to_user(struct task_struct *target, { const struct user_regset *regset = &view->regsets[setno]; + if (!regset->get) + return -EOPNOTSUPP; + if (!access_ok(VERIFY_WRITE, data, size)) - return -EIO; + return -EFAULT; return regset->get(target, regset, offset, size, NULL, data); } @@ -358,8 +361,11 @@ static inline int copy_regset_from_user(struct task_struct *target, { const struct user_regset *regset = &view->regsets[setno]; + if (!regset->set) + return -EOPNOTSUPP; + if (!access_ok(VERIFY_READ, data, size)) - return -EIO; + return -EFAULT; return regset->set(target, regset, offset, size, NULL, data); } diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c index b7971d6f38bf..ee706ce44aa0 100644 --- a/kernel/events/hw_breakpoint.c +++ b/kernel/events/hw_breakpoint.c @@ -651,10 +651,10 @@ int __init init_hw_breakpoint(void) err_alloc: for_each_possible_cpu(err_cpu) { - if (err_cpu == cpu) - break; for (i = 0; i < TYPE_MAX; i++) kfree(per_cpu(nr_task_bp_pinned[i], cpu)); + if (err_cpu == cpu) + break; } return -ENOMEM; diff --git a/kernel/sched/core.c b/kernel/sched/core.c index b342f57879e6..33a0676ea744 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -6728,7 +6728,7 @@ int __init sched_create_sysfs_power_savings_entries(struct device *dev) static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action, void *hcpu) { - switch (action & ~CPU_TASKS_FROZEN) { + switch (action) { case CPU_ONLINE: case CPU_DOWN_FAILED: cpuset_update_active_cpus(); @@ -6741,7 +6741,7 @@ static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action, static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action, void *hcpu) { - switch (action & ~CPU_TASKS_FROZEN) { + switch (action) { case CPU_DOWN_PREPARE: cpuset_update_active_cpus(); return NOTIFY_OK; diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index 2044324b755a..2a6f33cd888c 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -74,6 +74,7 @@ static pid_t perf_event__get_comm_tgid(pid_t pid, char *comm, size_t len) if (size >= len) size = len - 1; memcpy(comm, name, size); + comm[size] = '\0'; } else if (memcmp(bf, "Tgid:", 5) == 0) { char *tgids = bf + 5; diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index 3f16e08a5c8d..ea32a061f1c8 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -349,6 +349,10 @@ struct perf_evsel *perf_evlist__id2evsel(struct perf_evlist *evlist, u64 id) hlist_for_each_entry(sid, pos, head, node) if (sid->id == id) return sid->evsel; + + if (!perf_evlist__sample_id_all(evlist)) + return list_entry(evlist->entries.next, struct perf_evsel, node); + return NULL; } diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 29cb65459811..e33554a562b3 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -1867,6 +1867,12 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev, tev->point.symbol); ret = -ENOENT; goto error; + } else if (tev->point.offset > sym->end - sym->start) { + pr_warning("Offset specified is greater than size of %s\n", + tev->point.symbol); + ret = -ENOENT; + goto error; + } return 1; diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 5d732621a462..74bd2e63c4b4 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -672,7 +672,7 @@ static int find_variable(Dwarf_Die *sc_die, struct probe_finder *pf) static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr, bool retprobe, struct probe_trace_point *tp) { - Dwarf_Addr eaddr; + Dwarf_Addr eaddr, highaddr; const char *name; /* Copy the name of probe point */ @@ -683,6 +683,16 @@ static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr, dwarf_diename(sp_die)); return -ENOENT; } + if (dwarf_highpc(sp_die, &highaddr) != 0) { + pr_warning("Failed to get end address of %s\n", + dwarf_diename(sp_die)); + return -ENOENT; + } + if (paddr > highaddr) { + pr_warning("Offset specified is greater than size of %s\n", + dwarf_diename(sp_die)); + return -EINVAL; + } tp->symbol = strdup(name); if (tp->symbol == NULL) return -ENOMEM; |