diff options
| -rw-r--r-- | arch/arm/Kconfig.debug | 30 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/Kconfig | 28 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/include/mach/debug-macro.S | 52 |
3 files changed, 31 insertions, 79 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index eab8ecbe69c1..8c72e1003b9a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -670,6 +670,33 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_S3C2410_UART0 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 0 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART1 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 1 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 1. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART2 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 2 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 2. The port must have been initialised + by the boot-loader before use. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -921,6 +948,9 @@ endchoice config DEBUG_EXYNOS_UART bool +config DEBUG_S3C2410_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 22d149bcfcc6..45a7026e9419 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -39,7 +39,6 @@ config CPU_S3C2410 default y select COMMON_CLK select CPU_ARM920T - select CPU_LLSERIAL_S3C2410 select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ @@ -53,7 +52,6 @@ config CPU_S3C2412 bool "SAMSUNG S3C2412" select COMMON_CLK select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM @@ -64,7 +62,6 @@ config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" select COMMON_CLK select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA @@ -75,7 +72,6 @@ config CPU_S3C2440 bool "SAMSUNG S3C2440" select COMMON_CLK select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 select S3C2410_COMMON_CLK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA @@ -86,7 +82,6 @@ config CPU_S3C2442 bool "SAMSUNG S3C2442" select COMMON_CLK select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM @@ -102,7 +97,6 @@ config CPU_S3C2443 bool "SAMSUNG S3C2443" select COMMON_CLK select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA help @@ -164,28 +158,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -# low-level serial option nodes - -config CPU_LLSERIAL_S3C2410_ONLY - bool - default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 - -config CPU_LLSERIAL_S3C2440_ONLY - bool - default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 - -config CPU_LLSERIAL_S3C2410 - bool - help - Selected if there is an S3C2410 (or register compatible) serial - low-level implementation needed - -config CPU_LLSERIAL_S3C2440 - bool - help - Selected if there is an S3C2440 (or register compatible) serial - low-level implementation needed - config S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" depends on ARM_S3C24XX_CPUFREQ diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 2f39737544c0..fbe3e711ebab 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -13,11 +13,9 @@ */ #include <mach/map.h> -#include <mach/regs-gpio.h> #include <linux/serial_s3c.h> #define S3C2410_UART1_OFF (0x4000) -#define SHIFT_2440TXF (14-9) .macro addruart, rp, rv, tmp ldr \rp, = S3C24XX_PA_UART @@ -28,56 +26,11 @@ #endif .endm - .macro fifo_full_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 1004f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? -1004: - ldr \rd, [\rx, # S3C2410_UFSTAT] - moveq \rd, \rd, lsr #SHIFT_2440TXF - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - .macro fifo_full_s3c2410 rd, rx ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S3C2410_UFSTAT_TXFULL .endm -/* fifo level reading */ - - .macro fifo_level_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 10000f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? - -10000: - ldr \rd, [\rx, # S3C2410_UFSTAT] - andne \rd, \rd, #S3C2410_UFSTAT_TXMASK - andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - .macro fifo_level_s3c2410 rd, rx ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S3C2410_UFSTAT_TXMASK @@ -88,12 +41,9 @@ * used variants of these */ -#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) +#if defined(CONFIG_DEBUG_S3C2410_UART) #define fifo_full fifo_full_s3c2410 #define fifo_level fifo_level_s3c2410 -#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) -#define fifo_full fifo_full_s3c24xx -#define fifo_level fifo_level_s3c24xx #endif /* include the reset of the code which will do the work */ |