aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-ux500/board-mop500.c14
-rw-r--r--arch/arm/plat-nomadik/include/plat/i2c.h8
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c2
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c276
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c19
-rw-r--r--drivers/i2c/busses/i2c-tegra.c39
-rw-r--r--include/linux/i2c/i2c-sh_mobile.h10
8 files changed, 263 insertions, 115 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 6e1907fa94f0..bb26f40493e6 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -204,7 +204,7 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
},
};
-#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \
static struct nmk_i2c_controller u8500_i2c##id##_data = { \
/* \
* slave data setup time, which is \
@@ -219,19 +219,21 @@ static struct nmk_i2c_controller u8500_i2c##id##_data = { \
.rft = _rft, \
/* std. mode operation */ \
.clk_freq = clk, \
+ /* Slave response timeout(ms) */\
+ .timeout = t_out, \
.sm = _sm, \
}
/*
* The board uses 4 i2c controllers, initialize all of
* them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
+ * Tx & Rx FIFO threshold values as 8 and standard
* mode of operation
*/
-U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
static void __init mop500_i2c_init(void)
{
diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h
index 1621db67a53d..8ba70ffc31ec 100644
--- a/arch/arm/plat-nomadik/include/plat/i2c.h
+++ b/arch/arm/plat-nomadik/include/plat/i2c.h
@@ -11,8 +11,8 @@
enum i2c_freq_mode {
I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */
I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */
+ I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */
I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */
- I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */
};
/**
@@ -24,13 +24,15 @@ enum i2c_freq_mode {
* to the values of 14, 6, 2 for a 48 MHz i2c clk
* @tft: Tx FIFO Threshold in bytes
* @rft: Rx FIFO Threshold in bytes
+ * @timeout Slave response timeout(ms)
* @sm: speed mode
*/
struct nmk_i2c_controller {
unsigned long clk_freq;
unsigned short slsu;
- unsigned char tft;
- unsigned char rft;
+ unsigned char tft;
+ unsigned char rft;
+ int timeout;
enum i2c_freq_mode sm;
};
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 428d098c35ef..646068e5100b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -673,15 +673,19 @@ config I2C_XILINX
will be called xilinx_i2c.
config I2C_EG20T
- tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH"
+ tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223)"
depends on PCI
help
This driver is for PCH(Platform controller Hub) I2C of EG20T which
is an IOH(Input/Output Hub) for x86 embedded processor.
This driver can access PCH I2C bus device.
- This driver also supports the ML7213, a companion chip for the
- Atom E6xx series and compatible with the Intel EG20T PCH.
+ This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+ Output Hub), ML7213 and ML7223.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
+ for MP(Media Phone) use.
+ ML7213/ML7223 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223 is completely compatible for Intel EG20T PCH.
comment "External I2C/SMBus adapter drivers"
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 878a12026af2..8abfa4a03ce1 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -182,10 +182,12 @@ static DEFINE_MUTEX(pch_mutex);
/* Definition for ML7213 by OKI SEMICONDUCTOR */
#define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_I2C 0x802D
+#define PCI_DEVICE_ID_ML7223_I2C 0x8010
static struct pci_device_id __devinitdata pch_pcidev_id[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
{0,}
};
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index e10e5cf3751a..0c731ca69f15 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -15,13 +15,14 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
#include <plat/i2c.h>
@@ -103,9 +104,6 @@
/* maximum threshold value */
#define MAX_I2C_FIFO_THRESHOLD 15
-/* per-transfer delay, required for the hardware to stabilize */
-#define I2C_DELAY 150
-
enum i2c_status {
I2C_NOP,
I2C_ON_GOING,
@@ -120,9 +118,6 @@ enum i2c_operation {
I2C_READ = 0x01
};
-/* controller response timeout in ms */
-#define I2C_TIMEOUT_MS 2000
-
/**
* struct i2c_nmk_client - client specific data
* @slave_adr: 7-bit slave address
@@ -151,6 +146,7 @@ struct i2c_nmk_client {
* @stop: stop condition
* @xfer_complete: acknowledge completion for a I2C message
* @result: controller propogated result
+ * @busy: Busy doing transfer
*/
struct nmk_i2c_dev {
struct platform_device *pdev;
@@ -163,6 +159,8 @@ struct nmk_i2c_dev {
int stop;
struct completion xfer_complete;
int result;
+ struct regulator *regulator;
+ bool busy;
};
/* controller's abort causes */
@@ -209,7 +207,7 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
writel((I2C_CR_FTX | I2C_CR_FRX), dev->virtbase + I2C_CR);
for (i = 0; i < LOOP_ATTEMPTS; i++) {
- timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT_MS);
+ timeout = jiffies + dev->adap.timeout;
while (!time_after(jiffies, timeout)) {
if ((readl(dev->virtbase + I2C_CR) &
@@ -253,11 +251,9 @@ static int init_hw(struct nmk_i2c_dev *dev)
{
int stat;
- clk_enable(dev->clk);
-
stat = flush_i2c_fifo(dev);
if (stat)
- return stat;
+ goto exit;
/* disable the controller */
i2c_clr_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
@@ -268,10 +264,8 @@ static int init_hw(struct nmk_i2c_dev *dev)
dev->cli.operation = I2C_NO_OPERATION;
- clk_disable(dev->clk);
-
- udelay(I2C_DELAY);
- return 0;
+exit:
+ return stat;
}
/* enable peripheral, master mode operation */
@@ -424,7 +418,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
dev->virtbase + I2C_IMSCR);
timeout = wait_for_completion_interruptible_timeout(
- &dev->xfer_complete, msecs_to_jiffies(I2C_TIMEOUT_MS));
+ &dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
dev_err(&dev->pdev->dev,
@@ -434,14 +428,32 @@ static int read_i2c(struct nmk_i2c_dev *dev)
}
if (timeout == 0) {
- /* controller has timedout, re-init the h/w */
- dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
- (void) init_hw(dev);
+ /* Controller timed out */
+ dev_err(&dev->pdev->dev, "read from slave 0x%x timed out\n",
+ dev->cli.slave_adr);
status = -ETIMEDOUT;
}
return status;
}
+static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes)
+{
+ int count;
+
+ for (count = (no_bytes - 2);
+ (count > 0) &&
+ (dev->cli.count != 0);
+ count--) {
+ /* write to the Tx FIFO */
+ writeb(*dev->cli.buffer,
+ dev->virtbase + I2C_TFR);
+ dev->cli.buffer++;
+ dev->cli.count--;
+ dev->cli.xfer_bytes++;
+ }
+
+}
+
/**
* write_i2c() - Write data to I2C client.
* @dev: private data of I2C Driver
@@ -469,8 +481,13 @@ static int write_i2c(struct nmk_i2c_dev *dev)
init_completion(&dev->xfer_complete);
/* enable interrupts by settings the masks */
- irq_mask = (I2C_IT_TXFNE | I2C_IT_TXFOVR |
- I2C_IT_MAL | I2C_IT_BERR);
+ irq_mask = (I2C_IT_TXFOVR | I2C_IT_MAL | I2C_IT_BERR);
+
+ /* Fill the TX FIFO with transmit data */
+ fill_tx_fifo(dev, MAX_I2C_FIFO_THRESHOLD);
+
+ if (dev->cli.count != 0)
+ irq_mask |= I2C_IT_TXFNE;
/*
* check if we want to transfer a single or multiple bytes, if so
@@ -488,7 +505,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
dev->virtbase + I2C_IMSCR);
timeout = wait_for_completion_interruptible_timeout(
- &dev->xfer_complete, msecs_to_jiffies(I2C_TIMEOUT_MS));
+ &dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
dev_err(&dev->pdev->dev,
@@ -498,9 +515,9 @@ static int write_i2c(struct nmk_i2c_dev *dev)
}
if (timeout == 0) {
- /* controller has timedout, re-init the h/w */
- dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
- (void) init_hw(dev);
+ /* Controller timed out */
+ dev_err(&dev->pdev->dev, "write to slave 0x%x timed out\n",
+ dev->cli.slave_adr);
status = -ETIMEDOUT;
}
@@ -508,6 +525,51 @@ static int write_i2c(struct nmk_i2c_dev *dev)
}
/**
+ * nmk_i2c_xfer_one() - transmit a single I2C message
+ * @dev: device with a message encoded into it
+ * @flags: message flags
+ */
+static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
+{
+ int status;
+
+ if (flags & I2C_M_RD) {
+ /* read operation */
+ dev->cli.operation = I2C_READ;
+ status = read_i2c(dev);
+ } else {
+ /* write operation */
+ dev->cli.operation = I2C_WRITE;
+ status = write_i2c(dev);
+ }
+
+ if (status || (dev->result)) {
+ u32 i2c_sr;
+ u32 cause;
+
+ i2c_sr = readl(dev->virtbase + I2C_SR);
+ /*
+ * Check if the controller I2C operation status
+ * is set to ABORT(11b).
+ */
+ if (((i2c_sr >> 2) & 0x3) == 0x3) {
+ /* get the abort cause */
+ cause = (i2c_sr >> 4) & 0x7;
+ dev_err(&dev->pdev->dev, "%s\n", cause
+ >= ARRAY_SIZE(abort_causes) ?
+ "unknown reason" :
+ abort_causes[cause]);
+ }
+
+ (void) init_hw(dev);
+
+ status = status ? status : dev->result;
+ }
+
+ return status;
+}
+
+/**
* nmk_i2c_xfer() - I2C transfer function used by kernel framework
* @i2c_adap: Adapter pointer to the controller
* @msgs: Pointer to data to be written.
@@ -559,53 +621,55 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
{
int status;
int i;
- u32 cause;
struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
+ int j;
+
+ dev->busy = true;
+
+ if (dev->regulator)
+ regulator_enable(dev->regulator);
+ pm_runtime_get_sync(&dev->pdev->dev);
+
+ clk_enable(dev->clk);
status = init_hw(dev);
if (status)
- return status;
+ goto out;
- clk_enable(dev->clk);
+ /* Attempt three times to send the message queue */
+ for (j = 0; j < 3; j++) {
+ /* setup the i2c controller */
+ setup_i2c_controller(dev);
- /* setup the i2c controller */
- setup_i2c_controller(dev);
+ for (i = 0; i < num_msgs; i++) {
+ if (unlikely(msgs[i].flags & I2C_M_TEN)) {
+ dev_err(&dev->pdev->dev, "10 bit addressing"
+ "not supported\n");
- for (i = 0; i < num_msgs; i++) {
- if (unlikely(msgs[i].flags & I2C_M_TEN)) {
- dev_err(&dev->pdev->dev, "10 bit addressing"
- "not supported\n");
- return -EINVAL;
- }
- dev->cli.slave_adr = msgs[i].addr;
- dev->cli.buffer = msgs[i].buf;
- dev->cli.count = msgs[i].len;
- dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
- dev->result = 0;
-
- if (msgs[i].flags & I2C_M_RD) {
- /* it is a read operation */
- dev->cli.operation = I2C_READ;
- status = read_i2c(dev);
- } else {
- /* write operation */
- dev->cli.operation = I2C_WRITE;
- status = write_i2c(dev);
- }
- if (status || (dev->result)) {
- /* get the abort cause */
- cause = (readl(dev->virtbase + I2C_SR) >> 4) & 0x7;
- dev_err(&dev->pdev->dev, "error during I2C"
- "message xfer: %d\n", cause);
- dev_err(&dev->pdev->dev, "%s\n",
- cause >= ARRAY_SIZE(abort_causes)
- ? "unknown reason" : abort_causes[cause]);
- clk_disable(dev->clk);
- return status;
+ status = -EINVAL;
+ goto out;
+ }
+ dev->cli.slave_adr = msgs[i].addr;
+ dev->cli.buffer = msgs[i].buf;
+ dev->cli.count = msgs[i].len;
+ dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
+ dev->result = 0;
+
+ status = nmk_i2c_xfer_one(dev, msgs[i].flags);
+ if (status != 0)
+ break;
}
- udelay(I2C_DELAY);
+ if (status == 0)
+ break;
}
+
+out:
clk_disable(dev->clk);
+ pm_runtime_put_sync(&dev->pdev->dev);
+ if (dev->regulator)
+ regulator_disable(dev->regulator);
+
+ dev->busy = false;
/* return the no. messages processed */
if (status)
@@ -666,17 +730,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
*/
disable_interrupts(dev, I2C_IT_TXFNE);
} else {
- for (count = (MAX_I2C_FIFO_THRESHOLD - tft - 2);
- (count > 0) &&
- (dev->cli.count != 0);
- count--) {
- /* write to the Tx FIFO */
- writeb(*dev->cli.buffer,
- dev->virtbase + I2C_TFR);
- dev->cli.buffer++;
- dev->cli.count--;
- dev->cli.xfer_bytes++;
- }
+ fill_tx_fifo(dev, (MAX_I2C_FIFO_THRESHOLD - tft));
/*
* if done, close the transfer by disabling the
* corresponding TXFNE interrupt
@@ -729,16 +783,11 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
}
}
- i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTD);
- i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTDWS);
-
- disable_interrupts(dev,
- (I2C_IT_TXFNE | I2C_IT_TXFE | I2C_IT_TXFF
- | I2C_IT_TXFOVR | I2C_IT_RXFNF
- | I2C_IT_RXFF | I2C_IT_RXFE));
+ disable_all_interrupts(dev);
+ clear_all_interrupts(dev);
if (dev->cli.count) {
- dev->result = -1;
+ dev->result = -EIO;
dev_err(&dev->pdev->dev, "%lu bytes still remain to be"
"xfered\n", dev->cli.count);
(void) init_hw(dev);
@@ -749,7 +798,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
/* Master Arbitration lost interrupt */
case I2C_IT_MAL:
- dev->result = -1;
+ dev->result = -EIO;
(void) init_hw(dev);
i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MAL);
@@ -763,7 +812,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
* during the transaction.
*/
case I2C_IT_BERR:
- dev->result = -1;
+ dev->result = -EIO;
/* get the status */
if (((readl(dev->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT)
(void) init_hw(dev);
@@ -779,7 +828,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
* the Tx FIFO is full.
*/
case I2C_IT_TXFOVR:
- dev->result = -1;
+ dev->result = -EIO;
(void) init_hw(dev);
dev_err(&dev->pdev->dev, "Tx Fifo Over run\n");
@@ -805,6 +854,38 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
+
+#ifdef CONFIG_PM
+static int nmk_i2c_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct nmk_i2c_dev *nmk_i2c = platform_get_drvdata(pdev);
+
+ if (nmk_i2c->busy)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int nmk_i2c_resume(struct device *dev)
+{
+ return 0;
+}
+#else
+#define nmk_i2c_suspend NULL
+#define nmk_i2c_resume NULL
+#endif
+
+/*
+ * We use noirq so that we suspend late and resume before the wakeup interrupt
+ * to ensure that we do the !pm_runtime_suspended() check in resume before
+ * there has been a regular pm runtime resume (via pm_runtime_get_sync()).
+ */
+static const struct dev_pm_ops nmk_i2c_pm = {
+ .suspend_noirq = nmk_i2c_suspend,
+ .resume_noirq = nmk_i2c_resume,
+};
+
static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -830,7 +911,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
ret = -ENOMEM;
goto err_no_mem;
}
-
+ dev->busy = false;
dev->pdev = pdev;
platform_set_drvdata(pdev, dev);
@@ -860,6 +941,15 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
goto err_irq;
}
+ dev->regulator = regulator_get(&pdev->dev, "v-i2c");
+ if (IS_ERR(dev->regulator)) {
+ dev_warn(&pdev->dev, "could not get i2c regulator\n");
+ dev->regulator = NULL;
+ }
+
+ pm_suspend_ignore_children(&pdev->dev, true);
+ pm_runtime_enable(&pdev->dev);
+
dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
dev_err(&pdev->dev, "could not get i2c clock\n");
@@ -872,6 +962,8 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &nmk_i2c_algo;
+ adap->timeout = pdata->timeout ? msecs_to_jiffies(pdata->timeout) :
+ msecs_to_jiffies(20000);
snprintf(adap->name, sizeof(adap->name),
"Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start);
@@ -887,12 +979,6 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(adap, dev);
- ret = init_hw(dev);
- if (ret != 0) {
- dev_err(&pdev->dev, "error in initializing i2c hardware\n");
- goto err_init_hw;
- }
-
dev_info(&pdev->dev, "initialize %s on virtual "
"base %p\n", adap->name, dev->virtbase);
@@ -904,10 +990,12 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
return 0;
- err_init_hw:
err_add_adap:
clk_put(dev->clk);
err_no_clk:
+ if (dev->regulator)
+ regulator_put(dev->regulator);
+ pm_runtime_disable(&pdev->dev);
free_irq(dev->irq, dev);
err_irq:
iounmap(dev->virtbase);
@@ -938,6 +1026,9 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
if (res)
release_mem_region(res->start, resource_size(res));
clk_put(dev->clk);
+ if (dev->regulator)
+ regulator_put(dev->regulator);
+ pm_runtime_disable(&pdev->dev);
platform_set_drvdata(pdev, NULL);
kfree(dev);
@@ -948,6 +1039,7 @@ static struct platform_driver nmk_i2c_driver = {
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
+ .pm = &nmk_i2c_pm,
},
.probe = nmk_i2c_probe,
.remove = __devexit_p(nmk_i2c_remove),
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 81ccd7875627..f633a53b6dbe 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -32,6 +32,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/i2c/i2c-sh_mobile.h>
/* Transmit operation: */
/* */
@@ -117,7 +118,7 @@ struct sh_mobile_i2c_data {
struct device *dev;
void __iomem *reg;
struct i2c_adapter adap;
-
+ unsigned long bus_speed;
struct clk *clk;
u_int8_t icic;
u_int8_t iccl;
@@ -205,7 +206,7 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
* We also round off the result.
*/
num = i2c_clk * 5;
- denom = NORMAL_SPEED * 9;
+ denom = pd->bus_speed * 9;
tmp = num * 10 / denom;
if (tmp % 10 >= 5)
pd->iccl = (u_int8_t)((num/denom) + 1);
@@ -574,10 +575,10 @@ static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
static int sh_mobile_i2c_probe(struct platform_device *dev)
{
+ struct i2c_sh_mobile_platform_data *pdata = dev->dev.platform_data;
struct sh_mobile_i2c_data *pd;
struct i2c_adapter *adap;
struct resource *res;
- char clk_name[8];
int size;
int ret;
@@ -587,10 +588,9 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
return -ENOMEM;
}
- snprintf(clk_name, sizeof(clk_name), "i2c%d", dev->id);
- pd->clk = clk_get(&dev->dev, clk_name);
+ pd->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(pd->clk)) {
- dev_err(&dev->dev, "cannot get clock \"%s\"\n", clk_name);
+ dev_err(&dev->dev, "cannot get clock\n");
ret = PTR_ERR(pd->clk);
goto err;
}
@@ -620,6 +620,11 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
goto err_irq;
}
+ /* Use platformd data bus speed or NORMAL_SPEED */
+ pd->bus_speed = NORMAL_SPEED;
+ if (pdata && pdata->bus_speed)
+ pd->bus_speed = pdata->bus_speed;
+
/* The IIC blocks on SH-Mobile ARM processors
* come with two new bits in ICIC.
*/
@@ -660,6 +665,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
goto err_all;
}
+ dev_info(&dev->dev, "I2C adapter %d with bus speed %lu Hz\n",
+ adap->nr, pd->bus_speed);
return 0;
err_all:
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index b4ab39b741eb..4d9319665e32 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -35,8 +35,10 @@
#define BYTES_PER_FIFO_WORD 4
#define I2C_CNFG 0x000
+#define I2C_CNFG_DEBOUNCE_CNT_SHIFT 12
#define I2C_CNFG_PACKET_MODE_EN (1<<10)
#define I2C_CNFG_NEW_MASTER_FSM (1<<11)
+#define I2C_STATUS 0x01C
#define I2C_SL_CNFG 0x020
#define I2C_SL_CNFG_NEWSL (1<<2)
#define I2C_SL_ADDR1 0x02c
@@ -77,6 +79,7 @@
#define I2C_ERR_NONE 0x00
#define I2C_ERR_NO_ACK 0x01
#define I2C_ERR_ARBITRATION_LOST 0x02
+#define I2C_ERR_UNKNOWN_INTERRUPT 0x04
#define PACKET_HEADER0_HEADER_SIZE_SHIFT 28
#define PACKET_HEADER0_PACKET_ID_SHIFT 16
@@ -121,6 +124,7 @@ struct tegra_i2c_dev {
void __iomem *base;
int cont_id;
int irq;
+ bool irq_disabled;
int is_dvc;
struct completion msg_complete;
int msg_err;
@@ -325,11 +329,17 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (i2c_dev->is_dvc)
tegra_dvc_init(i2c_dev);
- val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN;
+ val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN |
+ (0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
i2c_writel(i2c_dev, val, I2C_CNFG);
i2c_writel(i2c_dev, 0, I2C_INT_MASK);
clk_set_rate(i2c_dev->clk, i2c_dev->bus_clk_rate * 8);
+ if (!i2c_dev->is_dvc) {
+ u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
+ i2c_writel(i2c_dev, sl_cfg | I2C_SL_CNFG_NEWSL, I2C_SL_CNFG);
+ }
+
val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
@@ -338,6 +348,12 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
err = -ETIMEDOUT;
clk_disable(i2c_dev->clk);
+
+ if (i2c_dev->irq_disabled) {
+ i2c_dev->irq_disabled = 0;
+ enable_irq(i2c_dev->irq);
+ }
+
return err;
}
@@ -350,8 +366,19 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
status = i2c_readl(i2c_dev, I2C_INT_STATUS);
if (status == 0) {
- dev_warn(i2c_dev->dev, "interrupt with no status\n");
- return IRQ_NONE;
+ dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
+ i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
+ i2c_readl(i2c_dev, I2C_STATUS),
+ i2c_readl(i2c_dev, I2C_CNFG));
+ i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
+
+ if (!i2c_dev->irq_disabled) {
+ disable_irq_nosync(i2c_dev->irq);
+ i2c_dev->irq_disabled = 1;
+ }
+
+ complete(&i2c_dev->msg_complete);
+ goto err;
}
if (unlikely(status & status_err)) {
@@ -391,6 +418,8 @@ err:
I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ |
I2C_INT_RX_FIFO_DATA_REQ);
i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+ if (i2c_dev->is_dvc)
+ dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
return IRQ_HANDLED;
}
@@ -424,12 +453,12 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
packet_header = msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
packet_header |= I2C_HEADER_IE_ENABLE;
+ if (!stop)
+ packet_header |= I2C_HEADER_REPEAT_START;
if (msg->flags & I2C_M_TEN)
packet_header |= I2C_HEADER_10BIT_ADDR;
if (msg->flags & I2C_M_IGNORE_NAK)
packet_header |= I2C_HEADER_CONT_ON_NAK;
- if (msg->flags & I2C_M_NOSTART)
- packet_header |= I2C_HEADER_REPEAT_START;
if (msg->flags & I2C_M_RD)
packet_header |= I2C_HEADER_READ;
i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h
new file mode 100644
index 000000000000..beda7081aead
--- /dev/null
+++ b/include/linux/i2c/i2c-sh_mobile.h
@@ -0,0 +1,10 @@
+#ifndef __I2C_SH_MOBILE_H__
+#define __I2C_SH_MOBILE_H__
+
+#include <linux/platform_device.h>
+
+struct i2c_sh_mobile_platform_data {
+ unsigned long bus_speed;
+};
+
+#endif /* __I2C_SH_MOBILE_H__ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-25 07:17:50 +0000