aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/clock/at91-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/dma/ti-edma.txt4
-rw-r--r--Documentation/kernel-parameters.txt8
-rw-r--r--MAINTAINERS21
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi2
-rw-r--r--arch/arm/boot/dts/am3517.dtsi16
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts5
-rw-r--r--arch/arm/boot/dts/armada-370-db.dts1
-rw-r--r--arch/arm/boot/dts/armada-375-db.dts5
-rw-r--r--arch/arm/boot/dts/armada-xp-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-gp.dts10
-rw-r--r--arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts2
-rw-r--r--arch/arm/boot/dts/at91-sama5d3_xplained.dts4
-rw-r--r--arch/arm/boot/dts/at91sam9261.dtsi2
-rw-r--r--arch/arm/boot/dts/at91sam9rl.dtsi2
-rw-r--r--arch/arm/boot/dts/imx53.dtsi2
-rw-r--r--arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts18
-rw-r--r--arch/arm/boot/dts/kirkwood-nsa310-common.dtsi18
-rw-r--r--arch/arm/boot/dts/kirkwood-t5325.dts5
-rw-r--r--arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi19
-rw-r--r--arch/arm/boot/dts/omap2.dtsi7
-rw-r--r--arch/arm/boot/dts/omap2420.dtsi8
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi7
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3x30.dtsi66
-rw-r--r--arch/arm/boot/dts/omap3-igep.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-igep0020.dts4
-rw-r--r--arch/arm/boot/dts/omap3-sb-t35.dtsi37
-rw-r--r--arch/arm/boot/dts/omap3-sbc-t3517.dts13
-rw-r--r--arch/arm/boot/dts/omap3.dtsi2
-rw-r--r--arch/arm/boot/dts/omap5.dtsi7
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi2
-rw-r--r--arch/arm/boot/dts/sama5d3_mci2.dtsi2
-rw-r--r--arch/arm/boot/dts/sama5d3_tcb1.dtsi2
-rw-r--r--arch/arm/boot/dts/sama5d3_uart.dtsi2
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi14
-rw-r--r--arch/arm/common/edma.c48
-rw-r--r--arch/arm/configs/sunxi_defconfig2
-rw-r--r--arch/arm/include/asm/xen/page.h1
-rw-r--r--arch/arm/mach-omap2/omap-headsmp.S8
-rw-r--r--arch/arm/mach-orion5x/common.h2
-rw-r--r--arch/arm64/include/asm/memory.h1
-rw-r--r--arch/x86/include/asm/hugetlb.h1
-rw-r--r--arch/x86/kernel/cpu/rdrand.c1
-rw-r--r--arch/x86/kernel/ldt.c4
-rw-r--r--arch/x86/vdso/vdso32-setup.c8
-rw-r--r--block/blk-cgroup.c15
-rw-r--r--drivers/bus/mvebu-mbus.c22
-rw-r--r--drivers/gpu/drm/i915/intel_bios.c52
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c55
-rw-r--r--drivers/gpu/drm/i915/intel_fbdev.c9
-rw-r--r--drivers/gpu/drm/i915/intel_panel.c8
-rw-r--r--drivers/gpu/drm/i915/intel_pm.c40
-rw-r--r--drivers/gpu/drm/i915/intel_sdvo.c4
-rw-r--r--drivers/gpu/drm/i915/intel_uncore.c2
-rw-r--r--drivers/hwmon/emc1403.c10
-rw-r--r--drivers/md/md.c3
-rw-r--r--drivers/md/raid10.c13
-rw-r--r--drivers/memory/mvebu-devbus.c15
-rw-r--r--drivers/pci/host/pci-mvebu.c92
-rw-r--r--drivers/rtc/rtc-hym8563.c3
-rw-r--r--drivers/xen/events/events_fifo.c41
-rw-r--r--fs/cifs/inode.c3
-rw-r--r--fs/locks.c36
-rw-r--r--fs/nfsd/nfs4acl.c17
-rw-r--r--fs/nfsd/nfs4state.c25
-rw-r--r--include/dt-bindings/clock/at91.h (renamed from include/dt-bindings/clk/at91.h)0
-rw-r--r--include/linux/interrupt.h5
-rw-r--r--kernel/cgroup.c8
-rw-r--r--kernel/hrtimer.c8
-rw-r--r--kernel/workqueue.c36
-rw-r--r--mm/kmemleak.c4
-rw-r--r--mm/mremap.c9
-rw-r--r--mm/percpu.c2
-rw-r--r--security/device_cgroup.c202
74 files changed, 775 insertions, 363 deletions
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index cd5e23912888..6794cdc96d8f 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -62,7 +62,7 @@ Required properties for PMC node:
- interrupt-controller : tell that the PMC is an interrupt controller.
- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
and reflect the bit position in the PMC_ER/DR/SR registers.
- You can use the dt macros defined in dt-bindings/clk/at91.h.
+ You can use the dt macros defined in dt-bindings/clock/at91.h.
0 (AT91_PMC_MOSCS) -> main oscillator ready
1 (AT91_PMC_LOCKA) -> PLL A ready
2 (AT91_PMC_LOCKB) -> PLL B ready
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 9fbbdb783a72..68ff2137bae7 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -29,6 +29,6 @@ edma: edma@49000000 {
dma-channels = <64>;
ti,edma-regions = <4>;
ti,edma-slots = <256>;
- ti,edma-xbar-event-map = <1 12
- 2 13>;
+ ti,edma-xbar-event-map = /bits/ 16 <1 12
+ 2 13>;
};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 43842177b771..30a8ad0dae53 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2218,10 +2218,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
noreplace-smp [X86-32,SMP] Don't replace SMP instructions
with UP alternatives
- nordrand [X86] Disable the direct use of the RDRAND
- instruction even if it is supported by the
- processor. RDRAND is still available to user
- space applications.
+ nordrand [X86] Disable kernel use of the RDRAND and
+ RDSEED instructions even if they are supported
+ by the processor. RDRAND and RDSEED are still
+ available to user space applications.
noresume [SWSUSP] Disables resume and restores original swap
space.
diff --git a/MAINTAINERS b/MAINTAINERS
index 51ebb779c5f3..fa1b13996bd3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1893,14 +1893,15 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/broadcom/bnx2x/
-BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
+BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
M: Matt Porter <mporter@linaro.org>
L: bcm-kernel-feedback-list@broadcom.com
-T: git git://git.github.com/broadcom/bcm11351
+T: git git://github.com/broadcom/mach-bcm
S: Maintained
F: arch/arm/mach-bcm/
F: arch/arm/boot/dts/bcm113*
+F: arch/arm/boot/dts/bcm216*
F: arch/arm/boot/dts/bcm281*
F: arch/arm/configs/bcm_defconfig
F: drivers/mmc/host/sdhci_bcm_kona.c
@@ -4818,6 +4819,14 @@ L: linux-kernel@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: kernel/irq/
+
+IRQCHIP DRIVERS
+M: Thomas Gleixner <tglx@linutronix.de>
+M: Jason Cooper <jason@lakedaemon.net>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
+T: git git://git.infradead.org/users/jcooper/linux.git irqchip/core
F: drivers/irqchip/
IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
@@ -5490,15 +5499,15 @@ F: Documentation/hwmon/ltc4261
F: drivers/hwmon/ltc4261.c
LTP (Linux Test Project)
-M: Shubham Goyal <shubham@linux.vnet.ibm.com>
M: Mike Frysinger <vapier@gentoo.org>
M: Cyril Hrubis <chrubis@suse.cz>
-M: Caspar Zhang <caspar@casparzhang.com>
M: Wanlong Gao <gaowanlong@cn.fujitsu.com>
+M: Jan Stancek <jstancek@redhat.com>
+M: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
+M: Alexey Kodanev <alexey.kodanev@oracle.com>
L: ltp-list@lists.sourceforge.net (subscribers-only)
-W: http://ltp.sourceforge.net/
+W: http://linux-test-project.github.io/
T: git git://github.com/linux-test-project/ltp.git
-T: git git://ltp.git.sourceforge.net/gitroot/ltp/ltp-dev
S: Maintained
M32R ARCHITECTURE
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index cb6811e5ae5a..7ad75b4e0663 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -144,7 +144,7 @@
compatible = "ti,edma3";
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
reg = <0x49000000 0x10000>,
- <0x44e10f90 0x10>;
+ <0x44e10f90 0x40>;
interrupts = <12 13 14>;
#dma-cells = <1>;
dma-channels = <64>;
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 788391f91684..5a452fdd7c5d 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -62,5 +62,21 @@
};
};
+&iva {
+ status = "disabled";
+};
+
+&mailbox {
+ status = "disabled";
+};
+
+&mmu_isp {
+ status = "disabled";
+};
+
+&smartreflex_mpu_iva {
+ status = "disabled";
+};
+
/include/ "am35xx-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index df8798e8bd25..a055f7f0f14a 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -117,6 +117,11 @@
status = "okay";
};
+&gpio5 {
+ status = "okay";
+ ti,no-reset-on-init;
+};
+
&mmc1 {
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 82f238a9063f..3383c4b66803 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -67,6 +67,7 @@
i2c@11000 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
+ clock-frequency = <100000>;
status = "okay";
audio_codec: audio-codec@4a {
compatible = "cirrus,cs42l51";
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 9378d3136b41..0451124e8ebf 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -79,6 +79,11 @@
};
};
+ sata@a0000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
nand: nand@d0000 {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 448373c4b0e5..90f0bf6f9271 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -49,7 +49,7 @@
/* Device Bus parameters are required */
/* Read parameters */
- devbus,bus-width = <8>;
+ devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 61bda687f782..0c756421ae6a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -59,7 +59,7 @@
/* Device Bus parameters are required */
/* Read parameters */
- devbus,bus-width = <8>;
+ devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
@@ -146,22 +146,22 @@
ethernet@70000 {
status = "okay";
phy = <&phy0>;
- phy-mode = "rgmii-id";
+ phy-mode = "qsgmii";
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
- phy-mode = "rgmii-id";
+ phy-mode = "qsgmii";
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
- phy-mode = "rgmii-id";
+ phy-mode = "qsgmii";
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
- phy-mode = "rgmii-id";
+ phy-mode = "qsgmii";
};
/* Front-side USB slot */
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 985948ce67b3..5d42feb31049 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -39,7 +39,7 @@
/* Device Bus parameters are required */
/* Read parameters */
- devbus,bus-width = <8>;
+ devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index ce1375595e5f..4537259ce529 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -34,7 +34,7 @@
};
spi0: spi@f0004000 {
- cs-gpios = <&pioD 13 0>;
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
};
@@ -79,7 +79,7 @@
};
spi1: spi@f8008000 {
- cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+ cs-gpios = <&pioC 25 0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index e21dda0e8986..3be973e9889a 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -10,7 +10,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9261 family SoC";
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 63e1784d272c..92a52faebef7 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -8,7 +8,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 9c2bff2252d0..6a1bf4ff83d5 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -115,7 +115,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ipu";
- reg = <0x18000000 0x080000000>;
+ reg = <0x18000000 0x08000000>;
interrupts = <11 10>;
clocks = <&clks IMX5_CLK_IPU_GATE>,
<&clks IMX5_CLK_IPU_DI0_GATE>,
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 32c6fb4a1162..b939f4f52d16 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -30,6 +30,16 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl@10000 {
pmx_usb_led: pmx-usb-led {
@@ -73,14 +83,6 @@
ehci@50000 {
status = "okay";
};
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
index aa78c2d11fe7..e2cc85cc3b87 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -4,6 +4,16 @@
/ {
model = "ZyXEL NSA310";
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl: pinctrl@10000 {
@@ -26,14 +36,6 @@
status = "okay";
nr-ports = <2>;
};
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
gpio_poweroff {
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index 7d1c7677a18f..0bd70d928c69 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -127,11 +127,6 @@
i2c@11000 {
status = "okay";
-
- alc5621: alc5621@1a {
- compatible = "realtek,alc5621";
- reg = <0x1a>;
- };
};
serial@12000 {
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index f577b7df9a29..521c587acaee 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -24,11 +24,10 @@
compatible = "smsc,lan9221", "smsc,lan9115";
bank-width = <2>;
gpmc,mux-add-data;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <186>;
- gpmc,cs-wr-off-ns = <186>;
- gpmc,adv-on-ns = <12>;
- gpmc,adv-rd-off-ns = <48>;
+ gpmc,cs-on-ns = <1>;
+ gpmc,cs-rd-off-ns = <180>;
+ gpmc,cs-wr-off-ns = <180>;
+ gpmc,adv-rd-off-ns = <18>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
@@ -36,12 +35,10 @@
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
- gpmc,access-ns = <114>;
- gpmc,page-burst-access-ns = <6>;
- gpmc,bus-turnaround-ns = <12>;
- gpmc,cycle2cycle-delay-ns = <18>;
- gpmc,wr-data-mux-bus-ns = <90>;
- gpmc,wr-access-ns = <186>;
+ gpmc,access-ns = <144>;
+ gpmc,page-burst-access-ns = <24>;
+ gpmc,bus-turnaround-ns = <90>;
+ gpmc,cycle2cycle-delay-ns = <90>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&vddvario>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 22f35ea142c1..8f8c07da4ac1 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -71,13 +71,6 @@
interrupts = <58>;
};
- mailbox: mailbox@48094000 {
- compatible = "ti,omap2-mailbox";
- ti,hwmods = "mailbox";
- reg = <0x48094000 0x200>;
- interrupts = <26>;
- };
-
intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 85b1fb014c43..2d9979835f24 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -125,6 +125,14 @@
dma-names = "tx", "rx";
};
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>, <34>;
+ interrupt-names = "dsp", "iva";
+ ti,hwmods = "mailbox";
+ };
+
timer1: timer@48028000 {
compatible = "ti,omap2420-timer";
reg = <0x48028000 0x400>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index d09697dab55e..42d2c61c9e2d 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -216,6 +216,13 @@
dma-names = "tx", "rx";
};
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ ti,hwmods = "mailbox";
+ };
+
timer1: timer@49018000 {
compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index d00055809e31..25ba08331d88 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -10,18 +10,6 @@
cpu0-supply = <&vcc>;
};
};
-
- vddvario: regulator-vddvario {
- compatible = "regulator-fixed";
- regulator-name = "vddvario";
- regulator-always-on;
- };
-
- vdd33a: regulator-vdd33a {
- compatible = "regulator-fixed";
- regulator-name = "vdd33a";
- regulator-always-on;
- };
};
&omap3_pmx_core {
@@ -35,58 +23,34 @@
hsusb0_pins: pinmux_hsusb0_pins {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
- OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
- OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
- OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
- OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
- OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
- OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
- OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
- OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
- OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
- OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
- OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
};
+#include "omap-gpmc-smsc911x.dtsi"
+
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>;
- smsc1: ethernet@5,0 {
+ smsc1: ethernet@gpmc {
compatible = "smsc,lan9221", "smsc,lan9115";
pinctrl-names = "default";
pinctrl-0 = <&smsc1_pins>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
reg = <5 0 0xff>;
- bank-width = <2>;
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <186>;
- gpmc,cs-wr-off-ns = <186>;
- gpmc,adv-on-ns = <12>;
- gpmc,adv-rd-off-ns = <48>;
- gpmc,adv-wr-off-ns = <48>;
- gpmc,oe-on-ns = <54>;
- gpmc,oe-off-ns = <168>;
- gpmc,we-on-ns = <54>;
- gpmc,we-off-ns = <168>;
- gpmc,rd-cycle-ns = <186>;
- gpmc,wr-cycle-ns = <186>;
- gpmc,access-ns = <114>;
- gpmc,page-burst-access-ns = <6>;
- gpmc,bus-turnaround-ns = <12>;
- gpmc,cycle2cycle-delay-ns = <18>;
- gpmc,wr-data-mux-bus-ns = <90>;
- gpmc,wr-access-ns = <186>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
- vddvario-supply = <&vddvario>;
- vdd33a-supply = <&vdd33a>;
- reg-io-width = <4>;
- smsc,save-mac-address;
};
};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index b97736d98a64..e2d163bf0619 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -107,7 +107,7 @@
>;
};
- smsc911x_pins: pinmux_smsc911x_pins {
+ smsc9221_pins: pinmux_smsc9221_pins {
pinctrl-single,pins = <
0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
>;
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 7abd64f6ae21..b22caaaf774b 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,7 +10,7 @@
*/
#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
/ {
model = "IGEPv2 (TI OMAP AM/DM37x)";
@@ -248,7 +248,7 @@
ethernet@gpmc {
pinctrl-names = "default";
- pinctrl-0 = <&smsc911x_pins>;
+ pinctrl-0 = <&smsc9221_pins>;
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index 7909c51b05a5..d59e3de1441e 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -2,20 +2,6 @@
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
*/
-/ {
- vddvario_sb_t35: regulator-vddvario-sb-t35 {
- compatible = "regulator-fixed";
- regulator-name = "vddvario";
- regulator-always-on;
- };
-
- vdd33a_sb_t35: regulator-vdd33a-sb-t35 {
- compatible = "regulator-fixed";
- regulator-name = "vdd33a";
- regulator-always-on;
- };
-};
-
&omap3_pmx_core {
smsc2_pins: pinmux_smsc2_pins {
pinctrl-single,pins = <
@@ -37,11 +23,10 @@
reg = <4 0 0xff>;
bank-width = <2>;
gpmc,mux-add-data;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <186>;
- gpmc,cs-wr-off-ns = <186>;
- gpmc,adv-on-ns = <12>;
- gpmc,adv-rd-off-ns = <48>;
+ gpmc,cs-on-ns = <1>;
+ gpmc,cs-rd-off-ns = <180>;
+ gpmc,cs-wr-off-ns = <180>;
+ gpmc,adv-rd-off-ns = <18>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
@@ -49,16 +34,14 @@
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
- gpmc,access-ns = <114>;
- gpmc,page-burst-access-ns = <6>;
- gpmc,bus-turnaround-ns = <12>;
- gpmc,cycle2cycle-delay-ns = <18>;
- gpmc,wr-data-mux-bus-ns = <90>;
- gpmc,wr-access-ns = <186>;
+ gpmc,access-ns = <144>;
+ gpmc,page-burst-access-ns = <24>;
+ gpmc,bus-turnaround-ns = <90>;
+ gpmc,cycle2cycle-delay-ns = <90>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
- vddvario-supply = <&vddvario_sb_t35>;
- vdd33a-supply = <&vdd33a_sb_t35>;
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts
index 024c9c6c682d..42189b65d393 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3517.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts
@@ -8,6 +8,19 @@
/ {
model = "CompuLab SBC-T3517 with CM-T3517";
compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+ /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
+ vddvario: regulator-vddvario-sb-t35 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a-sb-t35 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
};
&omap3_pmx_core {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index acb9019dc437..4231191ade06 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -61,7 +61,7 @@
ti,hwmods = "mpu";
};
- iva {
+ iva: iva {
compatible = "ti,iva2.2";
ti,hwmods = "iva";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index f8c9855ce587..36b4312a5e0d 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -630,6 +630,13 @@
status = "disabled";
};
+ mailbox: mailbox@4a0f4000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4a0f4000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mailbox";
+ };
+
timer1: timer@4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index eabcfdbb403a..a106b0872910 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -13,7 +13,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel SAMA5D3 family SoC";
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index b029fe7ef17a..1b02208ea6ff 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
ahb {
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 382b04431f66..02848453ca0c 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
aliases {
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index a9fa75e41652..7a8d4c6115f7 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
aliases {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 32efc105df83..aba1c8a3f388 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -87,7 +87,7 @@
pll4: clk@01c20018 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
+ compatible = "allwinner,sun7i-a20-pll4-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll4";
@@ -109,6 +109,14 @@
clock-output-names = "pll6_sata", "pll6_other", "pll6";
};
+ pll8: clk@01c20040 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-pll4-clk";
+ reg = <0x01c20040 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll8";
+ };
+
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-cpu-clk";
@@ -805,9 +813,9 @@
status = "disabled";
};
- i2c4: i2c@01c2bc00 {
+ i2c4: i2c@01c2c000 {
compatible = "allwinner,sun4i-i2c";
- reg = <0x01c2bc00 0x400>;
+ reg = <0x01c2c000 0x400>;
interrupts = <0 89 4>;
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 41bca32409fc..5339009b3c0c 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -1423,55 +1423,38 @@ EXPORT_SYMBOL(edma_clear_event);
#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
-static int edma_of_read_u32_to_s16_array(const struct device_node *np,
- const char *propname, s16 *out_values,
- size_t sz)
+static int edma_xbar_event_map(struct device *dev, struct device_node *node,
+ struct edma_soc_info *pdata, size_t sz)
{
- int ret;
-
- ret = of_property_read_u16_array(np, propname, out_values, sz);
- if (ret)
- return ret;
-
- /* Terminate it */
- *out_values++ = -1;
- *out_values++ = -1;
-
- return 0;
-}
-
-static int edma_xbar_event_map(struct device *dev,
- struct device_node *node,
- struct edma_soc_info *pdata, int len)
-{
- int ret, i;
+ const char pname[] = "ti,edma-xbar-event-map";
struct resource res;
void __iomem *xbar;
- const s16 (*xbar_chans)[2];
+ s16 (*xbar_chans)[2];
+ size_t nelm = sz / sizeof(s16);
u32 shift, offset, mux;
+ int ret, i;
- xbar_chans = devm_kzalloc(dev,
- len/sizeof(s16) + 2*sizeof(s16),
- GFP_KERNEL);
+ xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
if (!xbar_chans)
return -ENOMEM;
ret = of_address_to_resource(node, 1, &res);
if (ret)
- return -EIO;
+ return -ENOMEM;
xbar = devm_ioremap(dev, res.start, resource_size(&res));
if (!xbar)
return -ENOMEM;
- ret = edma_of_read_u32_to_s16_array(node,
- "ti,edma-xbar-event-map",
- (s16 *)xbar_chans,
- len/sizeof(u32));
+ ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
if (ret)
return -EIO;
- for (i = 0; xbar_chans[i][0] != -1; i++) {
+ /* Invalidate last entry for the other user of this mess */
+ nelm >>= 1;
+ xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
+
+ for (i = 0; i < nelm; i++) {
shift = (xbar_chans[i][1] & 0x03) << 3;
offset = xbar_chans[i][1] & 0xfffffffc;
mux = readl(xbar + offset);
@@ -1480,8 +1463,7 @@ static int edma_xbar_event_map(struct device *dev,
writel(mux, (xbar + offset));
}
- pdata->xbar_chans = xbar_chans;
-
+ pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
return 0;
}
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index b5df4a511b0a..81ba78eaf54a 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -37,7 +37,7 @@ CONFIG_SUN4I_EMAC=y
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
CONFIG_SERIAL_8250=y
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index cf4f3e867395..ded062f9b358 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -77,7 +77,6 @@ static inline xpaddr_t machine_to_phys(xmaddr_t machine)
}
/* VIRT <-> MACHINE conversion */
#define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_pfn(v) (PFN_DOWN(__pa(v)))
#define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v)))
#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT))
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 75e92952c18e..40c5d5f1451c 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -1,7 +1,7 @@
/*
* Secondary CPU startup routine source file.
*
- * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009-2014 Texas Instruments, Inc.
*
* Author:
* Santosh Shilimkar <santosh.shilimkar@ti.com>
@@ -28,9 +28,13 @@
* code. This routine also provides a holding flag into which
* secondary core is held until we're ready for it to initialise.
* The primary core will update this flag using a hardware
-+ * register AuxCoreBoot0.
+ * register AuxCoreBoot0.
*/
ENTRY(omap5_secondary_startup)
+.arm
+THUMB( adr r9, BSYM(wait) ) @ CPU may be entered in ARM mode.
+THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
+THUMB( .thumb ) @ switch to Thumb now.
wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
ldr r0, [r2]
mov r0, r0, lsr #5
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f565f9944af2..7548db2bfb8a 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -21,7 +21,7 @@ struct mv_sata_platform_data;
#define ORION_MBUS_DEVBUS_BOOT_ATTR 0x0f
#define ORION_MBUS_DEVBUS_TARGET(cs) 0x01
#define ORION_MBUS_DEVBUS_ATTR(cs) (~(1 << cs))
-#define ORION_MBUS_SRAM_TARGET 0x00
+#define ORION_MBUS_SRAM_TARGET 0x09
#define ORION_MBUS_SRAM_ATTR 0x00
/*
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index e94f9458aa6f..993bce527b85 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -138,6 +138,7 @@ static inline void *phys_to_virt(phys_addr_t x)
#define __pa(x) __virt_to_phys((unsigned long)(x))
#define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x)))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+#define virt_to_pfn(x) __phys_to_pfn(__virt_to_phys(x))
/*
* virt_to_page(k) convert a _valid_ virtual address to struct page *
diff --git a/arch/x86/include/asm/hugetlb.h b/arch/x86/include/asm/hugetlb.h
index a8091216963b..68c05398bba9 100644
--- a/arch/x86/include/asm/hugetlb.h
+++ b/arch/x86/include/asm/hugetlb.h
@@ -52,6 +52,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
+ ptep_clear_flush(vma, addr, ptep);
}
static inline int huge_pte_none(pte_t pte)
diff --git a/arch/x86/kernel/cpu/rdrand.c b/arch/x86/kernel/cpu/rdrand.c
index 384df5105fbc..136ac74dee82 100644
--- a/arch/x86/kernel/cpu/rdrand.c
+++ b/arch/x86/kernel/cpu/rdrand.c
@@ -27,6 +27,7 @@
static int __init x86_rdrand_setup(char *s)
{
setup_clear_cpu_cap(X86_FEATURE_RDRAND);
+ setup_clear_cpu_cap(X86_FEATURE_RDSEED);
return 1;
}
__setup("nordrand", x86_rdrand_setup);
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index af1d14a9ebda..dcbbaa165bde 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -20,6 +20,8 @@
#include <asm/mmu_context.h>
#include <asm/syscalls.h>
+int sysctl_ldt16 = 0;
+
#ifdef CONFIG_SMP
static void flush_ldt(void *current_mm)
{
@@ -234,7 +236,7 @@ static int write_ldt(void __user *ptr, unsigned long bytecount, int oldmode)
* IRET leaking the high bits of the kernel stack address.
*/
#ifdef CONFIG_X86_64
- if (!ldt_info.seg_32bit) {
+ if (!ldt_info.seg_32bit && !sysctl_ldt16) {
error = -EINVAL;
goto out_unlock;
}
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 00348980a3a6..e1f220e3ca68 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -39,6 +39,7 @@
#ifdef CONFIG_X86_64
#define vdso_enabled sysctl_vsyscall32
#define arch_setup_additional_pages syscall32_setup_pages
+extern int sysctl_ldt16;
#endif
/*
@@ -249,6 +250,13 @@ static struct ctl_table abi_table2[] = {
.mode = 0644,
.proc_handler = proc_dointvec
},
+ {
+ .procname = "ldt16",
+ .data = &sysctl_ldt16,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec
+ },
{}
};
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index e4a4145926f6..1039fb9ff5f5 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -451,7 +451,20 @@ static int blkcg_reset_stats(struct cgroup_subsys_state *css,
struct blkcg_gq *blkg;
int i;
- mutex_lock(&blkcg_pol_mutex);
+ /*
+ * XXX: We invoke cgroup_add/rm_cftypes() under blkcg_pol_mutex
+ * which ends up putting cgroup's internal cgroup_tree_mutex under
+ * it; however, cgroup_tree_mutex is nested above cgroup file
+ * active protection and grabbing blkcg_pol_mutex from a cgroup
+ * file operation creates a possible circular dependency. cgroup
+ * internal locking is planned to go through further simplification
+ * and this issue should go away soon. For now, let's trylock
+ * blkcg_pol_mutex and restart the write on failure.
+ *
+ * http://lkml.kernel.org/g/5363C04B.4010400@oracle.com
+ */
+ if (!mutex_trylock(&blkcg_pol_mutex))
+ return restart_syscall();
spin_lock_irq(&blkcg->lock);
/*
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 293e2e0a0a87..00b73448b22e 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -56,6 +56,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/debugfs.h>
+#include <linux/log2.h>
/*
* DDR target is the same on all platforms.
@@ -222,12 +223,6 @@ static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus,
*/
if ((u64)base < wend && end > wbase)
return 0;
-
- /*
- * Check if target/attribute conflicts
- */
- if (target == wtarget && attr == wattr)
- return 0;
}
return 1;
@@ -266,6 +261,17 @@ static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
mbus->soc->win_cfg_offset(win);
u32 ctrl, remap_addr;
+ if (!is_power_of_2(size)) {
+ WARN(true, "Invalid MBus window size: 0x%zx\n", size);
+ return -EINVAL;
+ }
+
+ if ((base & (phys_addr_t)(size - 1)) != 0) {
+ WARN(true, "Invalid MBus base/size: %pa len 0x%zx\n", &base,
+ size);
+ return -EINVAL;
+ }
+
ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
(attr << WIN_CTRL_ATTR_SHIFT) |
(target << WIN_CTRL_TGT_SHIFT) |
@@ -413,6 +419,10 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
win, (unsigned long long)wbase,
(unsigned long long)(wbase + wsize), wtarget, wattr);
+ if (!is_power_of_2(wsize) ||
+ ((wbase & (u64)(wsize - 1)) != 0))
+ seq_puts(seq, " (Invalid base/size!!)");
+
if (win < mbus->soc->num_remappable_wins) {
seq_printf(seq, " (remap %016llx)\n",
(unsigned long long)wremap);
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index fa486c5fbb02..aff4a113cda3 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -560,47 +560,71 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
dev_priv->vbt.edp_pps = *edp_pps;
- dev_priv->vbt.edp_rate = edp_link_params->rate ? DP_LINK_BW_2_7 :
- DP_LINK_BW_1_62;
+ switch (edp_link_params->rate) {
+ case EDP_RATE_1_62:
+ dev_priv->vbt.edp_rate = DP_LINK_BW_1_62;
+ break;
+ case EDP_RATE_2_7:
+ dev_priv->vbt.edp_rate = DP_LINK_BW_2_7;
+ break;
+ default:
+ DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n",
+ edp_link_params->rate);
+ break;
+ }
+
switch (edp_link_params->lanes) {
- case 0:
+ case EDP_LANE_1:
dev_priv->vbt.edp_lanes = 1;
break;
- case 1:
+ case EDP_LANE_2:
dev_priv->vbt.edp_lanes = 2;
break;
- case 3:
- default:
+ case EDP_LANE_4:
dev_priv->vbt.edp_lanes = 4;
break;
+ default:
+ DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n",
+ edp_link_params->lanes);
+ break;
}
+
switch (edp_link_params->preemphasis) {
- case 0:
+ case EDP_PREEMPHASIS_NONE:
dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_0;
break;
- case 1:
+ case EDP_PREEMPHASIS_3_5dB:
dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5;
break;
- case 2:
+ case EDP_PREEMPHASIS_6dB:
dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_6;
break;
- case 3:
+ case EDP_PREEMPHASIS_9_5dB:
dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5;
break;
+ default:
+ DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n",
+ edp_link_params->preemphasis);
+ break;
}
+
switch (edp_link_params->vswing) {
- case 0:
+ case EDP_VSWING_0_4V:
dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_400;
break;
- case 1:
+ case EDP_VSWING_0_6V:
dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_600;
break;
- case 2:
+ case EDP_VSWING_0_8V:
dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_800;
break;
- case 3:
+ case EDP_VSWING_1_2V:
dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_1200;
break;
+ default:
+ DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n",
+ edp_link_params->vswing);
+ break;
}
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5ca68aa9f237..2a00cb828d20 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -121,6 +121,22 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp)
return max_link_bw;
}
+static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ u8 source_max, sink_max;
+
+ source_max = 4;
+ if (HAS_DDI(dev) && intel_dig_port->port == PORT_A &&
+ (intel_dig_port->saved_port_bits & DDI_A_4_LANES) == 0)
+ source_max = 2;
+
+ sink_max = drm_dp_max_lane_count(intel_dp->dpcd);
+
+ return min(source_max, sink_max);
+}
+
/*
* The units on the numbers in the next two are... bizarre. Examples will
* make it clearer; this one parallels an example in the eDP spec.
@@ -171,7 +187,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
}
max_link_clock = drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
- max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
+ max_lanes = intel_dp_max_lane_count(intel_dp);
max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
mode_rate = intel_dp_link_required(target_clock, 18);
@@ -751,8 +767,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc *intel_crtc = encoder->new_crtc;
struct intel_connector *intel_connector = intel_dp->attached_connector;
int lane_count, clock;
- int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
+ int min_lane_count = 1;
+ int max_lane_count = intel_dp_max_lane_count(intel_dp);
/* Conveniently, the link BW constants become indices with a shift...*/
+ int min_clock = 0;
int max_clock = intel_dp_max_link_bw(intel_dp) >> 3;
int bpp, mode_rate;
static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
@@ -785,19 +803,38 @@ intel_dp_compute_config(struct intel_encoder *encoder,
/* Walk through all bpp values. Luckily they're all nicely spaced with 2
* bpc in between. */
bpp = pipe_config->pipe_bpp;
- if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
- dev_priv->vbt.edp_bpp < bpp) {
- DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n",
- dev_priv->vbt.edp_bpp);
- bpp = dev_priv->vbt.edp_bpp;
+ if (is_edp(intel_dp)) {
+ if (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp) {
+ DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n",
+ dev_priv->vbt.edp_bpp);
+ bpp = dev_priv->vbt.edp_bpp;
+ }
+
+ if (IS_BROADWELL(dev)) {
+ /* Yes, it's an ugly hack. */
+ min_lane_count = max_lane_count;
+ DRM_DEBUG_KMS("forcing lane count to max (%u) on BDW\n",
+ min_lane_count);
+ } else if (dev_priv->vbt.edp_lanes) {
+ min_lane_count = min(dev_priv->vbt.edp_lanes,
+ max_lane_count);
+ DRM_DEBUG_KMS("using min %u lanes per VBT\n",
+ min_lane_count);
+ }
+
+ if (dev_priv->vbt.edp_rate) {
+ min_clock = min(dev_priv->vbt.edp_rate >> 3, max_clock);
+ DRM_DEBUG_KMS("using min %02x link bw per VBT\n",
+ bws[min_clock]);
+ }
}
for (; bpp >= 6*3; bpp -= 2*3) {
mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
bpp);
- for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
- for (clock = 0; clock <= max_clock; clock++) {
+ for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
+ for (clock = min_clock; clock <= max_clock; clock++) {
link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
link_avail = intel_dp_max_data_rate(link_clock,
lane_count);
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index fce4a0d93c0b..f73ba5e6b7a8 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -387,6 +387,15 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
height);
}
+ /* No preferred mode marked by the EDID? Are there any modes? */
+ if (!modes[i] && !list_empty(&connector->modes)) {
+ DRM_DEBUG_KMS("using first mode listed on connector %s\n",
+ drm_get_connector_name(connector));
+ modes[i] = list_first_entry(&connector->modes,
+ struct drm_display_mode,
+ head);
+ }
+
/* last resort: use current mode */
if (!modes[i]) {
/*
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 0eead16aeda7..cb8cfb7e0974 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -492,6 +492,7 @@ void intel_panel_set_backlight(struct intel_connector *connector, u32 level,
enum pipe pipe = intel_get_pipe_from_connector(connector);
u32 freq;
unsigned long flags;
+ u64 n;
if (!panel->backlight.present || pipe == INVALID_PIPE)
return;
@@ -502,10 +503,9 @@ void intel_panel_set_backlight(struct intel_connector *connector, u32 level,
/* scale to hardware max, but be careful to not overflow */
freq = panel->backlight.max;
- if (freq < max)
- level = level * freq / max;
- else
- level = freq / max * level;
+ n = (u64)level * freq;
+ do_div(n, max);
+ level = n;
panel->backlight.level = level;
if (panel->backlight.device)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 19e94c3edc19..d93dcf683e8c 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2095,6 +2095,43 @@ static void intel_print_wm_latency(struct drm_device *dev,
}
}
+static bool ilk_increase_wm_latency(struct drm_i915_private *dev_priv,
+ uint16_t wm[5], uint16_t min)
+{
+ int level, max_level = ilk_wm_max_level(dev_priv->dev);
+
+ if (wm[0] >= min)
+ return false;
+
+ wm[0] = max(wm[0], min);
+ for (level = 1; level <= max_level; level++)
+ wm[level] = max_t(uint16_t, wm[level], DIV_ROUND_UP(min, 5));
+
+ return true;
+}
+
+static void snb_wm_latency_quirk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ bool changed;
+
+ /*
+ * The BIOS provided WM memory latency values are often
+ * inadequate for high resolution displays. Adjust them.
+ */
+ changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
+ ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12) |
+ ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12);
+
+ if (!changed)
+ return;
+
+ DRM_DEBUG_KMS("WM latency values increased to avoid potential underruns\n");
+ intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency);
+ intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency);
+ intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency);
+}
+
static void ilk_setup_wm_latency(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -2112,6 +2149,9 @@ static void ilk_setup_wm_latency(struct drm_device *dev)
intel_print_wm_latency(dev, "Primary", dev_priv->wm.pri_latency);
intel_print_wm_latency(dev, "Sprite", dev_priv->wm.spr_latency);
intel_print_wm_latency(dev, "Cursor", dev_priv->wm.cur_latency);
+
+ if (IS_GEN6(dev))
+ snb_wm_latency_quirk(dev);
}
static void ilk_compute_wm_parameters(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d27155adf5db..46be00d66df3 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2424,8 +2424,8 @@ intel_sdvo_connector_init(struct intel_sdvo_connector *connector,
if (ret < 0)
goto err1;
- ret = sysfs_create_link(&encoder->ddc.dev.kobj,
- &drm_connector->kdev->kobj,
+ ret = sysfs_create_link(&drm_connector->kdev->kobj,
+ &encoder->ddc.dev.kobj,
encoder->ddc.dev.kobj.name);
if (ret < 0)
goto err2;
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index f729dc71d5be..d0c75779d3f6 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -185,6 +185,8 @@ static void vlv_force_wake_reset(struct drm_i915_private *dev_priv)
{
__raw_i915_write32(dev_priv, FORCEWAKE_VLV,
_MASKED_BIT_DISABLE(0xffff));
+ __raw_i915_write32(dev_priv, FORCEWAKE_MEDIA_VLV,
+ _MASKED_BIT_DISABLE(0xffff));
/* something from same cacheline, but !FORCEWAKE_VLV */
__raw_posting_read(dev_priv, FORCEWAKE_ACK_VLV);
}
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index 90ec1173b8a1..01723f04fe45 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -163,7 +163,7 @@ static ssize_t store_hyst(struct device *dev,
if (retval < 0)
goto fail;
- hyst = val - retval * 1000;
+ hyst = retval * 1000 - val;
hyst = DIV_ROUND_CLOSEST(hyst, 1000);
if (hyst < 0 || hyst > 255) {
retval = -ERANGE;
@@ -330,7 +330,7 @@ static int emc1403_detect(struct i2c_client *client,
}
id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG);
- if (id != 0x01)
+ if (id < 0x01 || id > 0x04)
return -ENODEV;
return 0;
@@ -355,9 +355,9 @@ static int emc1403_probe(struct i2c_client *client,
if (id->driver_data)
data->groups[1] = &emc1404_group;
- hwmon_dev = hwmon_device_register_with_groups(&client->dev,
- client->name, data,
- data->groups);
+ hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
+ client->name, data,
+ data->groups);
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8fda38d23e38..237b7e0ddc7a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8516,7 +8516,8 @@ static int md_notify_reboot(struct notifier_block *this,
if (mddev_trylock(mddev)) {
if (mddev->pers)
__md_stop_writes(mddev);
- mddev->safemode = 2;
+ if (mddev->persistent)
+ mddev->safemode = 2;
mddev_unlock(mddev);
}
need_delay = 1;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 33fc408e5eac..cb882aae9e20 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1172,6 +1172,13 @@ static void __make_request(struct mddev *mddev, struct bio *bio)
int max_sectors;
int sectors;
+ /*
+ * Register the new request and wait if the reconstruction
+ * thread has put up a bar for new requests.
+ * Continue immediately if no resync is active currently.
+ */
+ wait_barrier(conf);
+
sectors = bio_sectors(bio);
while (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
bio->bi_iter.bi_sector < conf->reshape_progress &&
@@ -1552,12 +1559,6 @@ static void make_request(struct mddev *mddev, struct bio *bio)
md_write_start(mddev, bio);
- /*
- * Register the new request and wait if the reconstruction
- * thread has put up a bar for new requests.
- * Continue immediately if no resync is active currently.
- */
- wait_barrier(conf);
do {
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 110c03627051..b59a17fb7c3e 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -108,8 +108,19 @@ static int devbus_set_timing_params(struct devbus *devbus,
node->full_name);
return err;
}
- /* Convert bit width to byte width */
- r.bus_width /= 8;
+
+ /*
+ * The bus width is encoded into the register as 0 for 8 bits,
+ * and 1 for 16 bits, so we do the necessary conversion here.
+ */
+ if (r.bus_width == 8)
+ r.bus_width = 0;
+ else if (r.bus_width == 16)
+ r.bus_width = 1;
+ else {
+ dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width);
+ return -EINVAL;
+ }
err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
&r.badr_skew);
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index d3d1cfd51e09..e384e2534594 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -293,6 +293,58 @@ static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
return PCIBIOS_SUCCESSFUL;
}
+/*
+ * Remove windows, starting from the largest ones to the smallest
+ * ones.
+ */
+static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
+ phys_addr_t base, size_t size)
+{
+ while (size) {
+ size_t sz = 1 << (fls(size) - 1);
+
+ mvebu_mbus_del_window(base, sz);
+ base += sz;
+ size -= sz;
+ }
+}
+
+/*
+ * MBus windows can only have a power of two size, but PCI BARs do not
+ * have this constraint. Therefore, we have to split the PCI BAR into
+ * areas each having a power of two size. We start from the largest
+ * one (i.e highest order bit set in the size).
+ */
+static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
+ unsigned int target, unsigned int attribute,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap)
+{
+ size_t size_mapped = 0;
+
+ while (size) {
+ size_t sz = 1 << (fls(size) - 1);
+ int ret;
+
+ ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
+ sz, remap);
+ if (ret) {
+ dev_err(&port->pcie->pdev->dev,
+ "Could not create MBus window at 0x%x, size 0x%x: %d\n",
+ base, sz, ret);
+ mvebu_pcie_del_windows(port, base - size_mapped,
+ size_mapped);
+ return;
+ }
+
+ size -= sz;
+ size_mapped += sz;
+ base += sz;
+ if (remap != MVEBU_MBUS_NO_REMAP)
+ remap += sz;
+ }
+}
+
static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
{
phys_addr_t iobase;
@@ -304,8 +356,8 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
/* If a window was configured, remove it */
if (port->iowin_base) {
- mvebu_mbus_del_window(port->iowin_base,
- port->iowin_size);
+ mvebu_pcie_del_windows(port, port->iowin_base,
+ port->iowin_size);
port->iowin_base = 0;
port->iowin_size = 0;
}
@@ -331,11 +383,11 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
port->iowin_base = port->pcie->io.start + iobase;
port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
(port->bridge.iolimitupper << 16)) -
- iobase);
+ iobase) + 1;
- mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr,
- port->iowin_base, port->iowin_size,
- iobase);
+ mvebu_pcie_add_windows(port, port->io_target, port->io_attr,
+ port->iowin_base, port->iowin_size,
+ iobase);
}
static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
@@ -346,8 +398,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
/* If a window was configured, remove it */
if (port->memwin_base) {
- mvebu_mbus_del_window(port->memwin_base,
- port->memwin_size);
+ mvebu_pcie_del_windows(port, port->memwin_base,
+ port->memwin_size);
port->memwin_base = 0;
port->memwin_size = 0;
}
@@ -364,10 +416,11 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16);
port->memwin_size =
(((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
- port->memwin_base;
+ port->memwin_base + 1;
- mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr,
- port->memwin_base, port->memwin_size);
+ mvebu_pcie_add_windows(port, port->mem_target, port->mem_attr,
+ port->memwin_base, port->memwin_size,
+ MVEBU_MBUS_NO_REMAP);
}
/*
@@ -743,14 +796,21 @@ static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
/*
* On the PCI-to-PCI bridge side, the I/O windows must have at
- * least a 64 KB size and be aligned on their size, and the
- * memory windows must have at least a 1 MB size and be
- * aligned on their size
+ * least a 64 KB size and the memory windows must have at
+ * least a 1 MB size. Moreover, MBus windows need to have a
+ * base address aligned on their size, and their size must be
+ * a power of two. This means that if the BAR doesn't have a
+ * power of two size, several MBus windows will actually be
+ * created. We need to ensure that the biggest MBus window
+ * (which will be the first one) is aligned on its size, which
+ * explains the rounddown_pow_of_two() being done here.
*/
if (res->flags & IORESOURCE_IO)
- return round_up(start, max_t(resource_size_t, SZ_64K, size));
+ return round_up(start, max_t(resource_size_t, SZ_64K,
+ rounddown_pow_of_two(size)));
else if (res->flags & IORESOURCE_MEM)
- return round_up(start, max_t(resource_size_t, SZ_1M, size));
+ return round_up(start, max_t(resource_size_t, SZ_1M,
+ rounddown_pow_of_two(size)));
else
return start;
}
diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index bd628a6f981d..e5f13c4310fe 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -569,6 +569,9 @@ static int hym8563_probe(struct i2c_client *client,
if (IS_ERR(hym8563->rtc))
return PTR_ERR(hym8563->rtc);
+ /* the hym8563 alarm only supports a minute accuracy */
+ hym8563->rtc->uie_unsupported = 1;
+
#ifdef CONFIG_COMMON_CLK
hym8563_clkout_register_clk(hym8563);
#endif
diff --git a/drivers/xen/events/events_fifo.c b/drivers/xen/events/events_fifo.c
index 96109a9972b6..84b4bfb84344 100644
--- a/drivers/xen/events/events_fifo.c
+++ b/drivers/xen/events/events_fifo.c
@@ -66,7 +66,22 @@ static DEFINE_PER_CPU(struct evtchn_fifo_queue, cpu_queue);
static event_word_t *event_array[MAX_EVENT_ARRAY_PAGES] __read_mostly;
static unsigned event_array_pages __read_mostly;
+/*
+ * sync_set_bit() and friends must be unsigned long aligned on non-x86
+ * platforms.
+ */
+#if !defined(CONFIG_X86) && BITS_PER_LONG > 32
+
+#define BM(w) (unsigned long *)((unsigned long)w & ~0x7UL)
+#define EVTCHN_FIFO_BIT(b, w) \
+ (((unsigned long)w & 0x4UL) ? (EVTCHN_FIFO_ ##b + 32) : EVTCHN_FIFO_ ##b)
+
+#else
+
#define BM(w) ((unsigned long *)(w))
+#define EVTCHN_FIFO_BIT(b, w) EVTCHN_FIFO_ ##b
+
+#endif
static inline event_word_t *event_word_from_port(unsigned port)
{
@@ -161,33 +176,38 @@ static void evtchn_fifo_bind_to_cpu(struct irq_info *info, unsigned cpu)
static void evtchn_fifo_clear_pending(unsigned port)
{
event_word_t *word = event_word_from_port(port);
- sync_clear_bit(EVTCHN_FIFO_PENDING, BM(word));
+ sync_clear_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word));
}
static void evtchn_fifo_set_pending(unsigned port)
{
event_word_t *word = event_word_from_port(port);
- sync_set_bit(EVTCHN_FIFO_PENDING, BM(word));
+ sync_set_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word));
}
static bool evtchn_fifo_is_pending(unsigned port)
{
event_word_t *word = event_word_from_port(port);
- return sync_test_bit(EVTCHN_FIFO_PENDING, BM(word));
+ return sync_test_bit(EVTCHN_FIFO_BIT(PENDING, word), BM(word));
}
static bool evtchn_fifo_test_and_set_mask(unsigned port)
{
event_word_t *word = event_word_from_port(port);
- return sync_test_and_set_bit(EVTCHN_FIFO_MASKED, BM(word));
+ return sync_test_and_set_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word));
}
static void evtchn_fifo_mask(unsigned port)
{
event_word_t *word = event_word_from_port(port);
- sync_set_bit(EVTCHN_FIFO_MASKED, BM(word));
+ sync_set_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word));
}
+static bool evtchn_fifo_is_masked(unsigned port)
+{
+ event_word_t *word = event_word_from_port(port);
+ return sync_test_bit(EVTCHN_FIFO_BIT(MASKED, word), BM(word));
+}
/*
* Clear MASKED, spinning if BUSY is set.
*/
@@ -211,7 +231,7 @@ static void evtchn_fifo_unmask(unsigned port)
BUG_ON(!irqs_disabled());
clear_masked(word);
- if (sync_test_bit(EVTCHN_FIFO_PENDING, BM(word))) {
+ if (evtchn_fifo_is_pending(port)) {
struct evtchn_unmask unmask = { .port = port };
(void)HYPERVISOR_event_channel_op(EVTCHNOP_unmask, &unmask);
}
@@ -243,7 +263,7 @@ static void handle_irq_for_port(unsigned port)
static void consume_one_event(unsigned cpu,
struct evtchn_fifo_control_block *control_block,
- unsigned priority, uint32_t *ready)
+ unsigned priority, unsigned long *ready)
{
struct evtchn_fifo_queue *q = &per_cpu(cpu_queue, cpu);
uint32_t head;
@@ -273,10 +293,9 @@ static void consume_one_event(unsigned cpu,
* copy of the ready word.
*/
if (head == 0)
- clear_bit(priority, BM(ready));
+ clear_bit(priority, ready);
- if (sync_test_bit(EVTCHN_FIFO_PENDING, BM(word))
- && !sync_test_bit(EVTCHN_FIFO_MASKED, BM(word)))
+ if (evtchn_fifo_is_pending(port) && !evtchn_fifo_is_masked(port))
handle_irq_for_port(port);
q->head[priority] = head;
@@ -285,7 +304,7 @@ static void consume_one_event(unsigned cpu,
static void evtchn_fifo_handle_events(unsigned cpu)
{
struct evtchn_fifo_control_block *control_block;
- uint32_t ready;
+ unsigned long ready;
unsigned q;
control_block = per_cpu(cpu_control_block, cpu);
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index aadc2b68678b..a22d667f1069 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1737,6 +1737,9 @@ cifs_inode_needs_reval(struct inode *inode)
if (cifs_i->time == 0)
return true;
+ if (!cifs_sb->actimeo)
+ return true;
+
if (!time_in_range(jiffies, cifs_i->time,
cifs_i->time + cifs_sb->actimeo))
return true;
diff --git a/fs/locks.c b/fs/locks.c
index e663aeac579e..e390bd9ae068 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -389,18 +389,6 @@ static int flock64_to_posix_lock(struct file *filp, struct file_lock *fl,
fl->fl_ops = NULL;
fl->fl_lmops = NULL;
- /* Ensure that fl->fl_filp has compatible f_mode */
- switch (l->l_type) {
- case F_RDLCK:
- if (!(filp->f_mode & FMODE_READ))
- return -EBADF;
- break;
- case F_WRLCK:
- if (!(filp->f_mode & FMODE_WRITE))
- return -EBADF;
- break;
- }
-
return assign_type(fl, l->l_type);
}
@@ -2034,6 +2022,22 @@ static int do_lock_file_wait(struct file *filp, unsigned int cmd,
return error;
}
+/* Ensure that fl->fl_filp has compatible f_mode for F_SETLK calls */
+static int
+check_fmode_for_setlk(struct file_lock *fl)
+{
+ switch (fl->fl_type) {
+ case F_RDLCK:
+ if (!(fl->fl_file->f_mode & FMODE_READ))
+ return -EBADF;
+ break;
+ case F_WRLCK:
+ if (!(fl->fl_file->f_mode & FMODE_WRITE))
+ return -EBADF;
+ }
+ return 0;
+}
+
/* Apply the lock described by l to an open file descriptor.
* This implements both the F_SETLK and F_SETLKW commands of fcntl().
*/
@@ -2071,6 +2075,10 @@ again:
if (error)
goto out;
+ error = check_fmode_for_setlk(file_lock);
+ if (error)
+ goto out;
+
/*
* If the cmd is requesting file-private locks, then set the
* FL_OFDLCK flag and override the owner.
@@ -2206,6 +2214,10 @@ again:
if (error)
goto out;
+ error = check_fmode_for_setlk(file_lock);
+ if (error)
+ goto out;
+
/*
* If the cmd is requesting file-private locks, then set the
* FL_OFDLCK flag and override the owner.
diff --git a/fs/nfsd/nfs4acl.c b/fs/nfsd/nfs4acl.c
index 6f3f392d48af..b6f46013dddf 100644
--- a/fs/nfsd/nfs4acl.c
+++ b/fs/nfsd/nfs4acl.c
@@ -402,8 +402,10 @@ sort_pacl(struct posix_acl *pacl)
* by uid/gid. */
int i, j;
- if (pacl->a_count <= 4)
- return; /* no users or groups */
+ /* no users or groups */
+ if (!pacl || pacl->a_count <= 4)
+ return;
+
i = 1;
while (pacl->a_entries[i].e_tag == ACL_USER)
i++;
@@ -530,13 +532,12 @@ posix_state_to_acl(struct posix_acl_state *state, unsigned int flags)
/*
* ACLs with no ACEs are treated differently in the inheritable
- * and effective cases: when there are no inheritable ACEs, we
- * set a zero-length default posix acl:
+ * and effective cases: when there are no inheritable ACEs,
+ * calls ->set_acl with a NULL ACL structure.
*/
- if (state->empty && (flags & NFS4_ACL_TYPE_DEFAULT)) {
- pacl = posix_acl_alloc(0, GFP_KERNEL);
- return pacl ? pacl : ERR_PTR(-ENOMEM);
- }
+ if (state->empty && (flags & NFS4_ACL_TYPE_DEFAULT))
+ return NULL;
+
/*
* When there are no effective ACEs, the following will end
* up setting a 3-element effective posix ACL with all
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 3ba65979a3cd..32b699bebb9c 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -1078,6 +1078,18 @@ static struct nfs4_client *alloc_client(struct xdr_netobj name)
return NULL;
}
clp->cl_name.len = name.len;
+ INIT_LIST_HEAD(&clp->cl_sessions);
+ idr_init(&clp->cl_stateids);
+ atomic_set(&clp->cl_refcount, 0);
+ clp->cl_cb_state = NFSD4_CB_UNKNOWN;
+ INIT_LIST_HEAD(&clp->cl_idhash);
+ INIT_LIST_HEAD(&clp->cl_openowners);
+ INIT_LIST_HEAD(&clp->cl_delegations);
+ INIT_LIST_HEAD(&clp->cl_lru);
+ INIT_LIST_HEAD(&clp->cl_callbacks);
+ INIT_LIST_HEAD(&clp->cl_revoked);
+ spin_lock_init(&clp->cl_lock);
+ rpc_init_wait_queue(&clp->cl_cb_waitq, "Backchannel slot table");
return clp;
}
@@ -1095,6 +1107,7 @@ free_client(struct nfs4_client *clp)
WARN_ON_ONCE(atomic_read(&ses->se_ref));
free_session(ses);
}
+ rpc_destroy_wait_queue(&clp->cl_cb_waitq);
free_svc_cred(&clp->cl_cred);
kfree(clp->cl_name.data);
idr_destroy(&clp->cl_stateids);
@@ -1347,7 +1360,6 @@ static struct nfs4_client *create_client(struct xdr_netobj name,
if (clp == NULL)
return NULL;
- INIT_LIST_HEAD(&clp->cl_sessions);
ret = copy_cred(&clp->cl_cred, &rqstp->rq_cred);
if (ret) {
spin_lock(&nn->client_lock);
@@ -1355,20 +1367,9 @@ static struct nfs4_client *create_client(struct xdr_netobj name,
spin_unlock(&nn->client_lock);
return NULL;
}
- idr_init(&clp->cl_stateids);
- atomic_set(&clp->cl_refcount, 0);
- clp->cl_cb_state = NFSD4_CB_UNKNOWN;
- INIT_LIST_HEAD(&clp->cl_idhash);
- INIT_LIST_HEAD(&clp->cl_openowners);
- INIT_LIST_HEAD(&clp->cl_delegations);
- INIT_LIST_HEAD(&clp->cl_lru);
- INIT_LIST_HEAD(&clp->cl_callbacks);
- INIT_LIST_HEAD(&clp->cl_revoked);
- spin_lock_init(&clp->cl_lock);
nfsd4_init_callback(&clp->cl_cb_null);
clp->cl_time = get_seconds();
clear_bit(0, &clp->cl_cb_slot_busy);
- rpc_init_wait_queue(&clp->cl_cb_waitq, "Backchannel slot table");
copy_verf(clp, verf);
rpc_copy_addr((struct sockaddr *) &clp->cl_addr, sa);
gen_confirm(clp);
diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h
index 0b4cb999a3f7..0b4cb999a3f7 100644
--- a/include/dt-bindings/clk/at91.h
+++ b/include/dt-bindings/clock/at91.h
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 97ac926c78a7..051c85032f48 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -272,6 +272,11 @@ static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
return -EINVAL;
}
+static inline int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
+{
+ return 0;
+}
+
static inline int irq_can_set_affinity(unsigned int irq)
{
return 0;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 9fcdaa705b6c..11a03d67635a 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1495,7 +1495,7 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type,
*/
if (!use_task_css_set_links)
cgroup_enable_task_cg_lists();
-retry:
+
mutex_lock(&cgroup_tree_mutex);
mutex_lock(&cgroup_mutex);
@@ -1503,7 +1503,7 @@ retry:
ret = parse_cgroupfs_options(data, &opts);
if (ret)
goto out_unlock;
-
+retry:
/* look for a matching existing root */
if (!opts.subsys_mask && !opts.none && !opts.name) {
cgrp_dfl_root_visible = true;
@@ -1562,9 +1562,9 @@ retry:
if (!atomic_inc_not_zero(&root->cgrp.refcnt)) {
mutex_unlock(&cgroup_mutex);
mutex_unlock(&cgroup_tree_mutex);
- kfree(opts.release_agent);
- kfree(opts.name);
msleep(10);
+ mutex_lock(&cgroup_tree_mutex);
+ mutex_lock(&cgroup_mutex);
goto retry;
}
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 6b715c0af1b1..e0501fe7140d 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -990,11 +990,8 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
/* Remove an active timer from the queue: */
ret = remove_hrtimer(timer, base);
- /* Switch the timer base, if necessary: */
- new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
-
if (mode & HRTIMER_MODE_REL) {
- tim = ktime_add_safe(tim, new_base->get_time());
+ tim = ktime_add_safe(tim, base->get_time());
/*
* CONFIG_TIME_LOW_RES is a temporary way for architectures
* to signal that they simply return xtime in
@@ -1009,6 +1006,9 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
+ /* Switch the timer base, if necessary: */
+ new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
+
timer_stats_hrtimer_set_start_info(timer);
leftmost = enqueue_hrtimer(timer, new_base);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 0ee63af30bd1..8edc87185427 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1916,6 +1916,12 @@ static void send_mayday(struct work_struct *work)
/* mayday mayday mayday */
if (list_empty(&pwq->mayday_node)) {
+ /*
+ * If @pwq is for an unbound wq, its base ref may be put at
+ * any time due to an attribute change. Pin @pwq until the
+ * rescuer is done with it.
+ */
+ get_pwq(pwq);
list_add_tail(&pwq->mayday_node, &wq->maydays);
wake_up_process(wq->rescuer->task);
}
@@ -2398,6 +2404,7 @@ static int rescuer_thread(void *__rescuer)
struct worker *rescuer = __rescuer;
struct workqueue_struct *wq = rescuer->rescue_wq;
struct list_head *scheduled = &rescuer->scheduled;
+ bool should_stop;
set_user_nice(current, RESCUER_NICE_LEVEL);
@@ -2409,11 +2416,15 @@ static int rescuer_thread(void *__rescuer)
repeat:
set_current_state(TASK_INTERRUPTIBLE);
- if (kthread_should_stop()) {
- __set_current_state(TASK_RUNNING);
- rescuer->task->flags &= ~PF_WQ_WORKER;
- return 0;
- }
+ /*
+ * By the time the rescuer is requested to stop, the workqueue
+ * shouldn't have any work pending, but @wq->maydays may still have
+ * pwq(s) queued. This can happen by non-rescuer workers consuming
+ * all the work items before the rescuer got to them. Go through
+ * @wq->maydays processing before acting on should_stop so that the
+ * list is always empty on exit.
+ */
+ should_stop = kthread_should_stop();
/* see whether any pwq is asking for help */
spin_lock_irq(&wq_mayday_lock);
@@ -2445,6 +2456,12 @@ repeat:
process_scheduled_works(rescuer);
/*
+ * Put the reference grabbed by send_mayday(). @pool won't
+ * go away while we're holding its lock.
+ */
+ put_pwq(pwq);
+
+ /*
* Leave this pool. If keep_working() is %true, notify a
* regular worker; otherwise, we end up with 0 concurrency
* and stalling the execution.
@@ -2459,6 +2476,12 @@ repeat:
spin_unlock_irq(&wq_mayday_lock);
+ if (should_stop) {
+ __set_current_state(TASK_RUNNING);
+ rescuer->task->flags &= ~PF_WQ_WORKER;
+ return 0;
+ }
+
/* rescuers should never participate in concurrency management */
WARN_ON_ONCE(!(rescuer->flags & WORKER_NOT_RUNNING));
schedule();
@@ -4100,7 +4123,8 @@ static void wq_update_unbound_numa(struct workqueue_struct *wq, int cpu,
if (!pwq) {
pr_warning("workqueue: allocation failed while updating NUMA affinity of \"%s\"\n",
wq->name);
- goto out_unlock;
+ mutex_lock(&wq->mutex);
+ goto use_dfl_pwq;
}
/*
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 91d67eaee050..8d2fcdfeff7f 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1775,10 +1775,9 @@ void __init kmemleak_init(void)
int i;
unsigned long flags;
- kmemleak_early_log = 0;
-
#ifdef CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF
if (!kmemleak_skip_disable) {
+ kmemleak_early_log = 0;
kmemleak_disable();
return;
}
@@ -1796,6 +1795,7 @@ void __init kmemleak_init(void)
/* the kernel is still in UP mode, so disabling the IRQs is enough */
local_irq_save(flags);
+ kmemleak_early_log = 0;
if (kmemleak_error) {
local_irq_restore(flags);
return;
diff --git a/mm/mremap.c b/mm/mremap.c
index 0843feb66f3d..05f1180e9f21 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -194,10 +194,17 @@ unsigned long move_page_tables(struct vm_area_struct *vma,
break;
if (pmd_trans_huge(*old_pmd)) {
int err = 0;
- if (extent == HPAGE_PMD_SIZE)
+ if (extent == HPAGE_PMD_SIZE) {
+ VM_BUG_ON(vma->vm_file || !vma->anon_vma);
+ /* See comment in move_ptes() */
+ if (need_rmap_locks)
+ anon_vma_lock_write(vma->anon_vma);
err = move_huge_pmd(vma, new_vma, old_addr,
new_addr, old_end,
old_pmd, new_pmd);
+ if (need_rmap_locks)
+ anon_vma_unlock_write(vma->anon_vma);
+ }
if (err > 0) {
need_flush = true;
continue;
diff --git a/mm/percpu.c b/mm/percpu.c
index 63e24fb4387b..2ddf9a990dbd 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -610,7 +610,7 @@ static struct pcpu_chunk *pcpu_alloc_chunk(void)
chunk->map = pcpu_mem_zalloc(PCPU_DFL_MAP_ALLOC *
sizeof(chunk->map[0]));
if (!chunk->map) {
- kfree(chunk);
+ pcpu_mem_free(chunk, pcpu_chunk_struct_size);
return NULL;
}
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 8365909f5f8c..9134dbf70d3e 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -306,57 +306,138 @@ static int devcgroup_seq_show(struct seq_file *m, void *v)
}
/**
- * may_access - verifies if a new exception is part of what is allowed
- * by a dev cgroup based on the default policy +
- * exceptions. This is used to make sure a child cgroup
- * won't have more privileges than its parent or to
- * verify if a certain access is allowed.
- * @dev_cgroup: dev cgroup to be tested against
- * @refex: new exception
- * @behavior: behavior of the exception
+ * match_exception - iterates the exception list trying to find a complete match
+ * @exceptions: list of exceptions
+ * @type: device type (DEV_BLOCK or DEV_CHAR)
+ * @major: device file major number, ~0 to match all
+ * @minor: device file minor number, ~0 to match all
+ * @access: permission mask (ACC_READ, ACC_WRITE, ACC_MKNOD)
+ *
+ * It is considered a complete match if an exception is found that will
+ * contain the entire range of provided parameters.
+ *
+ * Return: true in case it matches an exception completely
*/
-static bool may_access(struct dev_cgroup *dev_cgroup,
- struct dev_exception_item *refex,
- enum devcg_behavior behavior)
+static bool match_exception(struct list_head *exceptions, short type,
+ u32 major, u32 minor, short access)
{
struct dev_exception_item *ex;
- bool match = false;
- rcu_lockdep_assert(rcu_read_lock_held() ||
- lockdep_is_held(&devcgroup_mutex),
- "device_cgroup::may_access() called without proper synchronization");
+ list_for_each_entry_rcu(ex, exceptions, list) {
+ if ((type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
+ continue;
+ if ((type & DEV_CHAR) && !(ex->type & DEV_CHAR))
+ continue;
+ if (ex->major != ~0 && ex->major != major)
+ continue;
+ if (ex->minor != ~0 && ex->minor != minor)
+ continue;
+ /* provided access cannot have more than the exception rule */
+ if (access & (~ex->access))
+ continue;
+ return true;
+ }
+ return false;
+}
+
+/**
+ * match_exception_partial - iterates the exception list trying to find a partial match
+ * @exceptions: list of exceptions
+ * @type: device type (DEV_BLOCK or DEV_CHAR)
+ * @major: device file major number, ~0 to match all
+ * @minor: device file minor number, ~0 to match all
+ * @access: permission mask (ACC_READ, ACC_WRITE, ACC_MKNOD)
+ *
+ * It is considered a partial match if an exception's range is found to
+ * contain *any* of the devices specified by provided parameters. This is
+ * used to make sure no extra access is being granted that is forbidden by
+ * any of the exception list.
+ *
+ * Return: true in case the provided range mat matches an exception completely
+ */
+static bool match_exception_partial(struct list_head *exceptions, short type,
+ u32 major, u32 minor, short access)
+{
+ struct dev_exception_item *ex;
- list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
- if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
+ list_for_each_entry_rcu(ex, exceptions, list) {
+ if ((type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
- if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
+ if ((type & DEV_CHAR) && !(ex->type & DEV_CHAR))
continue;
- if (ex->major != ~0 && ex->major != refex->major)
+ /*
+ * We must be sure that both the exception and the provided
+ * range aren't masking all devices
+ */
+ if (ex->major != ~0 && major != ~0 && ex->major != major)
continue;
- if (ex->minor != ~0 && ex->minor != refex->minor)
+ if (ex->minor != ~0 && minor != ~0 && ex->minor != minor)
continue;
- if (refex->access & (~ex->access))
+ /*
+ * In order to make sure the provided range isn't matching
+ * an exception, all its access bits shouldn't match the
+ * exception's access bits
+ */
+ if (!(access & ex->access))
continue;
- match = true;
- break;
+ return true;
}
+ return false;
+}
+
+/**
+ * verify_new_ex - verifies if a new exception is allowed by parent cgroup's permissions
+ * @dev_cgroup: dev cgroup to be tested against
+ * @refex: new exception
+ * @behavior: behavior of the exception's dev_cgroup
+ *
+ * This is used to make sure a child cgroup won't have more privileges
+ * than its parent
+ */
+static bool verify_new_ex(struct dev_cgroup *dev_cgroup,
+ struct dev_exception_item *refex,
+ enum devcg_behavior behavior)
+{
+ bool match = false;
+
+ rcu_lockdep_assert(rcu_read_lock_held() ||
+ lockdep_is_held(&devcgroup_mutex),
+ "device_cgroup:verify_new_ex called without proper synchronization");
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (behavior == DEVCG_DEFAULT_ALLOW) {
- /* the exception will deny access to certain devices */
+ /*
+ * new exception in the child doesn't matter, only
+ * adding extra restrictions
+ */
return true;
} else {
- /* the exception will allow access to certain devices */
+ /*
+ * new exception in the child will add more devices
+ * that can be acessed, so it can't match any of
+ * parent's exceptions, even slightly
+ */
+ match = match_exception_partial(&dev_cgroup->exceptions,
+ refex->type,
+ refex->major,
+ refex->minor,
+ refex->access);
+
if (match)
- /*
- * a new exception allowing access shouldn't
- * match an parent's exception
- */
return false;
return true;
}
} else {
- /* only behavior == DEVCG_DEFAULT_DENY allowed here */
+ /*
+ * Only behavior == DEVCG_DEFAULT_DENY allowed here, therefore
+ * the new exception will add access to more devices and must
+ * be contained completely in an parent's exception to be
+ * allowed
+ */
+ match = match_exception(&dev_cgroup->exceptions, refex->type,
+ refex->major, refex->minor,
+ refex->access);
+
if (match)
/* parent has an exception that matches the proposed */
return true;
@@ -378,7 +459,38 @@ static int parent_has_perm(struct dev_cgroup *childcg,
if (!parent)
return 1;
- return may_access(parent, ex, childcg->behavior);
+ return verify_new_ex(parent, ex, childcg->behavior);
+}
+
+/**
+ * parent_allows_removal - verify if it's ok to remove an exception
+ * @childcg: child cgroup from where the exception will be removed
+ * @ex: exception being removed
+ *
+ * When removing an exception in cgroups with default ALLOW policy, it must
+ * be checked if removing it will give the child cgroup more access than the
+ * parent.
+ *
+ * Return: true if it's ok to remove exception, false otherwise
+ */
+static bool parent_allows_removal(struct dev_cgroup *childcg,
+ struct dev_exception_item *ex)
+{
+ struct dev_cgroup *parent = css_to_devcgroup(css_parent(&childcg->css));
+
+ if (!parent)
+ return true;
+
+ /* It's always allowed to remove access to devices */
+ if (childcg->behavior == DEVCG_DEFAULT_DENY)
+ return true;
+
+ /*
+ * Make sure you're not removing part or a whole exception existing in
+ * the parent cgroup
+ */
+ return !match_exception_partial(&parent->exceptions, ex->type,
+ ex->major, ex->minor, ex->access);
}
/**
@@ -616,17 +728,21 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup,
switch (filetype) {
case DEVCG_ALLOW:
- if (!parent_has_perm(devcgroup, &ex))
- return -EPERM;
/*
* If the default policy is to allow by default, try to remove
* an matching exception instead. And be silent about it: we
* don't want to break compatibility
*/
if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) {
+ /* Check if the parent allows removing it first */
+ if (!parent_allows_removal(devcgroup, &ex))
+ return -EPERM;
dev_exception_rm(devcgroup, &ex);
- return 0;
+ break;
}
+
+ if (!parent_has_perm(devcgroup, &ex))
+ return -EPERM;
rc = dev_exception_add(devcgroup, &ex);
break;
case DEVCG_DENY:
@@ -704,18 +820,18 @@ static int __devcgroup_check_permission(short type, u32 major, u32 minor,
short access)
{
struct dev_cgroup *dev_cgroup;
- struct dev_exception_item ex;
- int rc;
-
- memset(&ex, 0, sizeof(ex));
- ex.type = type;
- ex.major = major;
- ex.minor = minor;
- ex.access = access;
+ bool rc;
rcu_read_lock();
dev_cgroup = task_devcgroup(current);
- rc = may_access(dev_cgroup, &ex, dev_cgroup->behavior);
+ if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW)
+ /* Can't match any of the exceptions, even partially */
+ rc = !match_exception_partial(&dev_cgroup->exceptions,
+ type, major, minor, access);
+ else
+ /* Need to match completely one exception to be allowed */
+ rc = match_exception(&dev_cgroup->exceptions, type, major,
+ minor, access);
rcu_read_unlock();
if (!rc)