aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/stable/sysfs-bus-firewire11
-rw-r--r--Documentation/ABI/testing/sysfs-devices-edac140
-rw-r--r--Documentation/ABI/testing/sysfs-platform-asus-wmi7
-rw-r--r--Documentation/DMA-attributes.txt42
-rw-r--r--Documentation/device-mapper/striped.txt7
-rw-r--r--Documentation/device-mapper/thin-provisioning.txt24
-rw-r--r--Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt15
-rw-r--r--Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt14
-rw-r--r--Documentation/devicetree/bindings/ata/cavium-compact-flash.txt30
-rw-r--r--Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt49
-rw-r--r--Documentation/devicetree/bindings/i2c/cavium-i2c.txt34
-rw-r--r--Documentation/devicetree/bindings/mfd/ab8500.txt123
-rw-r--r--Documentation/devicetree/bindings/mfd/max77686.txt59
-rw-r--r--Documentation/devicetree/bindings/mfd/tps65910.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/twl6040.txt2
-rw-r--r--Documentation/devicetree/bindings/mips/cavium/bootbus.txt126
-rw-r--r--Documentation/devicetree/bindings/mips/cavium/ciu.txt26
-rw-r--r--Documentation/devicetree/bindings/mips/cavium/ciu2.txt27
-rw-r--r--Documentation/devicetree/bindings/mips/cavium/dma-engine.txt21
-rw-r--r--Documentation/devicetree/bindings/mips/cavium/uctl.txt46
-rw-r--r--Documentation/devicetree/bindings/net/cavium-mdio.txt27
-rw-r--r--Documentation/devicetree/bindings/net/cavium-mix.txt39
-rw-r--r--Documentation/devicetree/bindings/net/cavium-pip.txt98
-rw-r--r--Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt12
-rw-r--r--Documentation/devicetree/bindings/pwm/mxs-pwm.txt17
-rw-r--r--Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt18
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm.txt57
-rw-r--r--Documentation/devicetree/bindings/serial/cavium-uart.txt19
-rw-r--r--Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt28
-rw-r--r--Documentation/dontdiff1
-rw-r--r--Documentation/edac.txt112
-rw-r--r--Documentation/input/edt-ft5x06.txt54
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--Documentation/pwm.txt76
-rw-r--r--MAINTAINERS22
-rw-r--r--Makefile24
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/boot/dts/highbank.dts12
-rw-r--r--arch/arm/boot/dts/r8a7740.dtsi21
-rw-r--r--arch/arm/boot/dts/sh7377.dtsi21
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi6
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi6
-rw-r--r--arch/arm/common/dmabounce.c1
-rw-r--r--arch/arm/configs/armadillo800eva_defconfig25
-rw-r--r--arch/arm/configs/kzm9d_defconfig89
-rw-r--r--arch/arm/configs/kzm9g_defconfig8
-rw-r--r--arch/arm/configs/tegra_defconfig1
-rw-r--r--arch/arm/include/asm/dma-mapping.h24
-rw-r--r--arch/arm/mach-exynos/clock-exynos4.c41
-rw-r--r--arch/arm/mach-exynos/clock-exynos4.h3
-rw-r--r--arch/arm/mach-exynos/clock-exynos4210.c37
-rw-r--r--arch/arm/mach-exynos/clock-exynos4212.c41
-rw-r--r--arch/arm/mach-exynos/mach-nuri.c4
-rw-r--r--arch/arm/mach-exynos/mach-origen.c1
-rw-r--r--arch/arm/mach-pxa/eseries.h14
-rw-r--r--arch/arm/mach-pxa/hx4700.c56
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/pm-core.h4
-rw-r--r--arch/arm/mach-shmobile/Kconfig13
-rw-r--r--arch/arm/mach-shmobile/Makefile2
-rw-r--r--arch/arm/mach-shmobile/board-ag5evm.c82
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c62
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c455
-rw-r--r--arch/arm/mach-shmobile/board-bonito.c10
-rw-r--r--arch/arm/mach-shmobile/board-g4evm.c52
-rw-r--r--arch/arm/mach-shmobile/board-kota2.c30
-rw-r--r--arch/arm/mach-shmobile/board-kzm9d.c10
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c320
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c83
-rw-r--r--arch/arm/mach-shmobile/board-marzen.c10
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7740.c150
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7779.c2
-rw-r--r--arch/arm/mach-shmobile/clock-sh7367.c2
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c2
-rw-r--r--arch/arm/mach-shmobile/clock-sh7377.c2
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c12
-rw-r--r--arch/arm/mach-shmobile/include/mach/common.h1
-rw-r--r--arch/arm/mach-shmobile/include/mach/dma-register.h84
-rw-r--r--arch/arm/mach-shmobile/include/mach/gpio.h32
-rw-r--r--arch/arm/mach-shmobile/include/mach/pm-rmobile.h44
-rw-r--r--arch/arm/mach-shmobile/include/mach/r8a7740.h33
-rw-r--r--arch/arm/mach-shmobile/include/mach/sh7372.h45
-rw-r--r--arch/arm/mach-shmobile/include/mach/sh73a0.h7
-rw-r--r--arch/arm/mach-shmobile/intc-r8a7740.c13
-rw-r--r--arch/arm/mach-shmobile/pfc-r8a7740.c24
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7740.c54
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.c167
-rw-r--r--arch/arm/mach-shmobile/pm-sh7372.c297
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7740.c360
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c209
-rw-r--r--arch/arm/mach-shmobile/setup-sh7377.c47
-rw-r--r--arch/arm/mach-shmobile/setup-sh73a0.c152
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra20.c3
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra30.c3
-rw-r--r--arch/arm/mach-ux500/board-mop500.c30
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c7
-rw-r--r--arch/arm/mach-ux500/include/mach/setup.h3
-rw-r--r--arch/arm/mach-vt8500/Makefile2
-rw-r--r--arch/arm/mach-vt8500/pwm.c265
-rw-r--r--arch/arm/mm/dma-mapping.c561
-rw-r--r--arch/arm/mm/mm.h3
-rw-r--r--arch/arm/plat-mxc/Kconfig6
-rw-r--r--arch/arm/plat-mxc/Makefile1
-rw-r--r--arch/arm/plat-pxa/Makefile1
-rw-r--r--arch/arm/plat-pxa/pwm.c304
-rw-r--r--arch/arm/plat-samsung/Makefile4
-rw-r--r--arch/blackfin/Kconfig10
-rw-r--r--arch/blackfin/kernel/Makefile1
-rw-r--r--arch/blackfin/kernel/pwm.c100
-rw-r--r--arch/frv/include/asm/cpumask.h6
-rw-r--r--arch/hexagon/include/asm/Kbuild2
-rw-r--r--arch/ia64/Kconfig3
-rw-r--r--arch/ia64/include/asm/atomic.h4
-rw-r--r--arch/ia64/include/asm/machvec.h2
-rw-r--r--arch/ia64/include/asm/machvec_dig.h2
-rw-r--r--arch/ia64/include/asm/machvec_dig_vtd.h2
-rw-r--r--arch/ia64/include/asm/machvec_hpsim.h2
-rw-r--r--arch/ia64/include/asm/machvec_hpzx1.h2
-rw-r--r--arch/ia64/include/asm/machvec_hpzx1_swiotlb.h2
-rw-r--r--arch/ia64/include/asm/machvec_sn2.h2
-rw-r--r--arch/ia64/include/asm/machvec_uv.h2
-rw-r--r--arch/ia64/include/asm/machvec_xen.h2
-rw-r--r--arch/ia64/include/asm/processor.h2
-rw-r--r--arch/ia64/kvm/Kconfig1
-rw-r--r--arch/ia64/pci/fixup.c4
-rw-r--r--arch/mips/Kbuild.platforms1
-rw-r--r--arch/mips/Kconfig38
-rw-r--r--arch/mips/alchemy/board-mtx1.c4
-rw-r--r--arch/mips/alchemy/common/platform.c10
-rw-r--r--arch/mips/alchemy/devboards/Makefile2
-rw-r--r--arch/mips/alchemy/devboards/bcsr.c5
-rw-r--r--arch/mips/alchemy/devboards/pb1100.c4
-rw-r--r--arch/mips/alchemy/devboards/pb1500.c4
-rw-r--r--arch/mips/alchemy/devboards/platform.c30
-rw-r--r--arch/mips/alchemy/devboards/prom.c69
-rw-r--r--arch/mips/bcm63xx/Kconfig4
-rw-r--r--arch/mips/bcm63xx/Makefile3
-rw-r--r--arch/mips/bcm63xx/boards/board_bcm963xx.c107
-rw-r--r--arch/mips/bcm63xx/clk.c26
-rw-r--r--arch/mips/bcm63xx/cpu.c63
-rw-r--r--arch/mips/bcm63xx/dev-dsp.c2
-rw-r--r--arch/mips/bcm63xx/dev-flash.c123
-rw-r--r--arch/mips/bcm63xx/dev-rng.c40
-rw-r--r--arch/mips/bcm63xx/dev-spi.c119
-rw-r--r--arch/mips/bcm63xx/dev-wdt.c2
-rw-r--r--arch/mips/bcm63xx/irq.c21
-rw-r--r--arch/mips/bcm63xx/prom.c4
-rw-r--r--arch/mips/bcm63xx/setup.c13
-rw-r--r--arch/mips/boot/compressed/Makefile4
-rw-r--r--arch/mips/boot/compressed/uart-16550.c5
-rw-r--r--arch/mips/cavium-octeon/.gitignore2
-rw-r--r--arch/mips/cavium-octeon/Makefile16
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-fpa.c183
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c243
-rw-r--r--arch/mips/cavium-octeon/octeon-irq.c399
-rw-r--r--arch/mips/cavium-octeon/octeon-memcpy.S16
-rw-r--r--arch/mips/cavium-octeon/octeon-platform.c699
-rw-r--r--arch/mips/cavium-octeon/octeon_3xxx.dts571
-rw-r--r--arch/mips/cavium-octeon/octeon_68xx.dts625
-rw-r--r--arch/mips/cavium-octeon/serial.c134
-rw-r--r--arch/mips/cavium-octeon/setup.c45
-rw-r--r--arch/mips/configs/ls1b_defconfig109
-rw-r--r--arch/mips/configs/nlm_xlr_defconfig4
-rw-r--r--arch/mips/dec/prom/memory.c2
-rw-r--r--arch/mips/include/asm/cpu.h3
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h150
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h12
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h89
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h2
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h8
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h286
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/ioremap.h1
-rw-r--r--arch/mips/include/asm/mach-cavium-octeon/irq.h45
-rw-r--r--arch/mips/include/asm/mach-jz4740/jz4740_nand.h4
-rw-r--r--arch/mips/include/asm/mach-loongson/loongson.h3
-rw-r--r--arch/mips/include/asm/mach-loongson1/irq.h73
-rw-r--r--arch/mips/include/asm/mach-loongson1/loongson1.h44
-rw-r--r--arch/mips/include/asm/mach-loongson1/platform.h23
-rw-r--r--arch/mips/include/asm/mach-loongson1/prom.h24
-rw-r--r--arch/mips/include/asm/mach-loongson1/regs-clk.h33
-rw-r--r--arch/mips/include/asm/mach-loongson1/regs-wdt.h22
-rw-r--r--arch/mips/include/asm/mach-loongson1/war.h25
-rw-r--r--arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-tx49xx/mangle-port.h2
-rw-r--r--arch/mips/include/asm/mipsmtregs.h13
-rw-r--r--arch/mips/include/asm/module.h2
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h4
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/iomap.h5
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/pcibus.h76
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/pic.h4
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/usb.h64
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/xlp.h17
-rw-r--r--arch/mips/include/asm/netlogic/xlr/bridge.h104
-rw-r--r--arch/mips/include/asm/netlogic/xlr/flash.h55
-rw-r--r--arch/mips/include/asm/netlogic/xlr/gpio.h59
-rw-r--r--arch/mips/include/asm/octeon/cvmx-helper-fpa.h64
-rw-r--r--arch/mips/include/asm/octeon/cvmx-helper.h2
-rw-r--r--arch/mips/include/asm/octeon/octeon.h5
-rw-r--r--arch/mips/include/asm/prom.h3
-rw-r--r--arch/mips/include/asm/smtc.h6
-rw-r--r--arch/mips/include/asm/uaccess.h6
-rw-r--r--arch/mips/include/asm/uasm.h100
-rw-r--r--arch/mips/jz4740/board-qi_lb60.c1
-rw-r--r--arch/mips/jz4740/platform.c20
-rw-r--r--arch/mips/jz4740/reset.c49
-rw-r--r--arch/mips/kernel/cpu-probe.c299
-rw-r--r--arch/mips/kernel/perf_event_mipsxx.c5
-rw-r--r--arch/mips/kernel/prom.c29
-rw-r--r--arch/mips/kernel/smp.c4
-rw-r--r--arch/mips/kernel/smtc.c76
-rw-r--r--arch/mips/kernel/traps.c1
-rw-r--r--arch/mips/lib/Makefile2
-rw-r--r--arch/mips/lib/memcpy-inatomic.S451
-rw-r--r--arch/mips/lib/memcpy.S11
-rw-r--r--arch/mips/loongson1/Kconfig21
-rw-r--r--arch/mips/loongson1/Makefile11
-rw-r--r--arch/mips/loongson1/Platform7
-rw-r--r--arch/mips/loongson1/common/Makefile5
-rw-r--r--arch/mips/loongson1/common/clock.c165
-rw-r--r--arch/mips/loongson1/common/irq.c147
-rw-r--r--arch/mips/loongson1/common/platform.c124
-rw-r--r--arch/mips/loongson1/common/prom.c87
-rw-r--r--arch/mips/loongson1/common/reset.c45
-rw-r--r--arch/mips/loongson1/common/setup.c29
-rw-r--r--arch/mips/loongson1/ls1b/Makefile5
-rw-r--r--arch/mips/loongson1/ls1b/board.c33
-rw-r--r--arch/mips/mm/uasm.c62
-rw-r--r--arch/mips/netlogic/common/earlycons.c2
-rw-r--r--arch/mips/netlogic/common/smpboot.S157
-rw-r--r--arch/mips/netlogic/xlp/Makefile2
-rw-r--r--arch/mips/netlogic/xlp/nlm_hal.c52
-rw-r--r--arch/mips/netlogic/xlp/of.c34
-rw-r--r--arch/mips/netlogic/xlp/platform.c2
-rw-r--r--arch/mips/netlogic/xlp/setup.c16
-rw-r--r--arch/mips/netlogic/xlp/usb-init.c124
-rw-r--r--arch/mips/netlogic/xlr/Makefile2
-rw-r--r--arch/mips/netlogic/xlr/platform-flash.c220
-rw-r--r--arch/mips/netlogic/xlr/platform.c140
-rw-r--r--arch/mips/netlogic/xlr/setup.c2
-rw-r--r--arch/mips/oprofile/common.c1
-rw-r--r--arch/mips/oprofile/op_model_mipsxx.c10
-rw-r--r--arch/mips/pci/Makefile1
-rw-r--r--arch/mips/pci/fixup-cobalt.c8
-rw-r--r--arch/mips/pci/fixup-malta.c14
-rw-r--r--arch/mips/pci/fixup-rc32434.c2
-rw-r--r--arch/mips/pci/ops-bcm63xx.c63
-rw-r--r--arch/mips/pci/pci-bcm63xx.c133
-rw-r--r--arch/mips/pci/pci-bcm63xx.h5
-rw-r--r--arch/mips/pci/pci-xlp.c248
-rw-r--r--arch/mips/pci/pci-xlr.c4
-rw-r--r--arch/mips/pnx833x/stb22x/board.c4
-rw-r--r--arch/mips/txx9/generic/pci.c6
-rw-r--r--arch/mips/txx9/generic/setup.c12
-rw-r--r--arch/mips/txx9/generic/setup_tx4939.c2
-rw-r--r--arch/mips/txx9/rbtx4939/setup.c11
-rw-r--r--arch/mn10300/include/asm/ipc.h1
-rw-r--r--arch/openrisc/include/asm/Kbuild2
-rw-r--r--arch/powerpc/include/asm/dma-mapping.h8
-rw-r--r--arch/powerpc/kernel/dma-iommu.c1
-rw-r--r--arch/powerpc/kernel/dma-swiotlb.c1
-rw-r--r--arch/powerpc/kernel/dma.c36
-rw-r--r--arch/powerpc/kernel/vio.c1
-rw-r--r--arch/tile/include/asm/Kbuild1
-rw-r--r--arch/xtensa/include/asm/cpumask.h16
-rw-r--r--arch/xtensa/include/asm/rmap.h16
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/acpi/video_detect.c60
-rw-r--r--drivers/base/dma-mapping.c49
-rw-r--r--drivers/block/virtio_blk.c115
-rw-r--r--drivers/char/hw_random/Kconfig14
-rw-r--r--drivers/char/hw_random/Makefile1
-rw-r--r--drivers/char/hw_random/bcm63xx-rng.c175
-rw-r--r--drivers/char/hw_random/virtio-rng.c37
-rw-r--r--drivers/char/mspec.c2
-rw-r--r--drivers/cpufreq/exynos5250-cpufreq.c55
-rw-r--r--drivers/edac/Kconfig24
-rw-r--r--drivers/edac/Makefile3
-rw-r--r--drivers/edac/amd64_edac.c376
-rw-r--r--drivers/edac/amd64_edac.h29
-rw-r--r--drivers/edac/amd64_edac_dbg.c89
-rw-r--r--drivers/edac/amd64_edac_inj.c134
-rw-r--r--drivers/edac/amd76x_edac.c34
-rw-r--r--drivers/edac/cell_edac.c28
-rw-r--r--drivers/edac/cpc925_edac.c96
-rw-r--r--drivers/edac/e752x_edac.c92
-rw-r--r--drivers/edac/e7xxx_edac.c89
-rw-r--r--drivers/edac/edac_core.h39
-rw-r--r--drivers/edac/edac_device.c47
-rw-r--r--drivers/edac/edac_device_sysfs.c71
-rw-r--r--drivers/edac/edac_mc.c395
-rw-r--r--drivers/edac/edac_mc_sysfs.c1355
-rw-r--r--drivers/edac/edac_module.c20
-rw-r--r--drivers/edac/edac_module.h26
-rw-r--r--drivers/edac/edac_pci.c26
-rw-r--r--drivers/edac/edac_pci_sysfs.c49
-rw-r--r--drivers/edac/highbank_l2_edac.c149
-rw-r--r--drivers/edac/highbank_mc_edac.c264
-rw-r--r--drivers/edac/i3000_edac.c47
-rw-r--r--drivers/edac/i3200_edac.c48
-rw-r--r--drivers/edac/i5000_edac.c207
-rw-r--r--drivers/edac/i5100_edac.c14
-rw-r--r--drivers/edac/i5400_edac.c201
-rw-r--r--drivers/edac/i7300_edac.c173
-rw-r--r--drivers/edac/i7core_edac.c520
-rw-r--r--drivers/edac/i82443bxgx_edac.c51
-rw-r--r--drivers/edac/i82860_edac.c45
-rw-r--r--drivers/edac/i82875p_edac.c53
-rw-r--r--drivers/edac/i82975x_edac.c55
-rw-r--r--drivers/edac/mpc85xx_edac.c131
-rw-r--r--drivers/edac/mv64x60_edac.c40
-rw-r--r--drivers/edac/pasemi_edac.c22
-rw-r--r--drivers/edac/ppc4xx_edac.c16
-rw-r--r--drivers/edac/r82600_edac.c48
-rw-r--r--drivers/edac/sb_edac.c257
-rw-r--r--drivers/edac/tile_edac.c12
-rw-r--r--drivers/edac/x38_edac.c48
-rw-r--r--drivers/extcon/Kconfig2
-rw-r--r--drivers/extcon/extcon-max8997.c29
-rw-r--r--drivers/firewire/core-device.c9
-rw-r--r--drivers/firewire/core-iso.c2
-rw-r--r--drivers/firewire/core-transaction.c23
-rw-r--r--drivers/firewire/ohci.c30
-rw-r--r--drivers/gpio/Kconfig7
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-tps6586x.c158
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_connector.c3
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_core.c5
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_crtc.c294
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_crtc.h31
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_dmabuf.c33
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_drv.c9
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_drv.h4
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_encoder.c123
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_encoder.h12
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_fimd.c40
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_gem.c49
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_gem.h3
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_plane.c246
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_plane.h12
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_vidi.c53
-rw-r--r--drivers/gpu/drm/exynos/exynos_hdmi.c36
-rw-r--r--drivers/gpu/drm/exynos/exynos_mixer.c48
-rw-r--r--drivers/hwmon/acpi_power_meter.c4
-rw-r--r--drivers/hwmon/applesmc.c70
-rw-r--r--drivers/hwmon/coretemp.c2
-rw-r--r--drivers/hwmon/jc42.c26
-rw-r--r--drivers/hwmon/via-cputemp.c2
-rw-r--r--drivers/i2c/busses/i2c-octeon.c92
-rw-r--r--drivers/input/misc/88pm80x_onkey.c168
-rw-r--r--drivers/input/misc/Kconfig10
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/ab8500-ponkey.c4
-rw-r--r--drivers/input/mouse/synaptics.c22
-rw-r--r--drivers/input/tablet/wacom_wac.c21
-rw-r--r--drivers/input/tablet/wacom_wac.h3
-rw-r--r--drivers/input/touchscreen/Kconfig13
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c898
-rw-r--r--drivers/md/Kconfig9
-rw-r--r--drivers/md/dm-crypt.c219
-rw-r--r--drivers/md/dm-delay.c2
-rw-r--r--drivers/md/dm-exception-store.c13
-rw-r--r--drivers/md/dm-flakey.c2
-rw-r--r--drivers/md/dm-ioctl.c5
-rw-r--r--drivers/md/dm-linear.c2
-rw-r--r--drivers/md/dm-mpath.c49
-rw-r--r--drivers/md/dm-raid.c56
-rw-r--r--drivers/md/dm-raid1.c10
-rw-r--r--drivers/md/dm-snap.c34
-rw-r--r--drivers/md/dm-stripe.c87
-rw-r--r--drivers/md/dm-table.c3
-rw-r--r--drivers/md/dm-thin-metadata.c769
-rw-r--r--drivers/md/dm-thin-metadata.h25
-rw-r--r--drivers/md/dm-thin.c542
-rw-r--r--drivers/md/dm-verity.c2
-rw-r--r--drivers/md/dm.c40
-rw-r--r--drivers/md/dm.h5
-rw-r--r--drivers/md/persistent-data/Makefile1
-rw-r--r--drivers/md/persistent-data/dm-block-manager.c105
-rw-r--r--drivers/md/persistent-data/dm-block-manager.h21
-rw-r--r--drivers/md/persistent-data/dm-space-map-checker.c446
-rw-r--r--drivers/md/persistent-data/dm-space-map-checker.h26
-rw-r--r--drivers/md/persistent-data/dm-space-map-common.c12
-rw-r--r--drivers/md/persistent-data/dm-space-map-common.h1
-rw-r--r--drivers/md/persistent-data/dm-space-map-disk.c34
-rw-r--r--drivers/md/persistent-data/dm-transaction-manager.c91
-rw-r--r--drivers/md/persistent-data/dm-transaction-manager.h11
-rw-r--r--drivers/mfd/88pm800.c596
-rw-r--r--drivers/mfd/88pm805.c301
-rw-r--r--drivers/mfd/88pm80x.c145
-rw-r--r--drivers/mfd/88pm860x-core.c23
-rw-r--r--drivers/mfd/Kconfig99
-rw-r--r--drivers/mfd/Makefile15
-rw-r--r--drivers/mfd/ab3100-core.c23
-rw-r--r--drivers/mfd/ab8500-core.c242
-rw-r--r--drivers/mfd/ab8500-debugfs.c12
-rw-r--r--drivers/mfd/ab8500-gpadc.c9
-rw-r--r--drivers/mfd/ab8500-sysctrl.c6
-rw-r--r--drivers/mfd/adp5520.c2
-rw-r--r--drivers/mfd/anatop-mfd.c2
-rw-r--r--drivers/mfd/arizona-core.c566
-rw-r--r--drivers/mfd/arizona-i2c.c97
-rw-r--r--drivers/mfd/arizona-irq.c275
-rw-r--r--drivers/mfd/arizona-spi.c97
-rw-r--r--drivers/mfd/arizona.h40
-rw-r--r--drivers/mfd/da9052-core.c1
-rw-r--r--drivers/mfd/db8500-prcmu.c92
-rw-r--r--drivers/mfd/dbx500-prcmu-regs.h1
-rw-r--r--drivers/mfd/max77686-irq.c319
-rw-r--r--drivers/mfd/max77686.c187
-rw-r--r--drivers/mfd/max77693.c11
-rw-r--r--drivers/mfd/max8925-core.c8
-rw-r--r--drivers/mfd/max8997-irq.c62
-rw-r--r--drivers/mfd/max8997.c9
-rw-r--r--drivers/mfd/mc13xxx-core.c4
-rw-r--r--drivers/mfd/mc13xxx-i2c.c12
-rw-r--r--drivers/mfd/mc13xxx-spi.c15
-rw-r--r--drivers/mfd/mfd-core.c30
-rw-r--r--drivers/mfd/pcf50633-core.c9
-rw-r--r--drivers/mfd/s5m-core.c206
-rw-r--r--drivers/mfd/s5m-irq.c495
-rw-r--r--drivers/mfd/sec-core.c216
-rw-r--r--drivers/mfd/sec-irq.c317
-rw-r--r--drivers/mfd/tc3589x.c9
-rw-r--r--drivers/mfd/tps65090.c4
-rw-r--r--drivers/mfd/tps6586x.c296
-rw-r--r--drivers/mfd/tps65910.c23
-rw-r--r--drivers/mfd/twl-core.c3
-rw-r--r--drivers/mfd/twl6040-core.c24
-rw-r--r--drivers/mfd/wm5102-tables.c2399
-rw-r--r--drivers/mfd/wm5110-tables.c2281
-rw-r--r--drivers/mfd/wm8350-core.c354
-rw-r--r--drivers/mfd/wm8350-i2c.c5
-rw-r--r--drivers/mfd/wm8350-irq.c8
-rw-r--r--drivers/mfd/wm8350-regmap.c3222
-rw-r--r--drivers/mfd/wm8994-core.c17
-rw-r--r--drivers/mfd/wm8994-irq.c10
-rw-r--r--drivers/misc/Kconfig1
-rw-r--r--drivers/misc/ab8500-pwm.c6
-rw-r--r--drivers/mtd/nand/jz4740_nand.c228
-rw-r--r--drivers/net/ethernet/octeon/octeon_mgmt.c312
-rw-r--r--drivers/net/phy/mdio-octeon.c92
-rw-r--r--drivers/platform/x86/acer-wmi.c153
-rw-r--r--drivers/platform/x86/apple-gmux.c6
-rw-r--r--drivers/platform/x86/asus-nb-wmi.c108
-rw-r--r--drivers/platform/x86/asus-wmi.c23
-rw-r--r--drivers/platform/x86/asus-wmi.h1
-rw-r--r--drivers/platform/x86/classmate-laptop.c405
-rw-r--r--drivers/platform/x86/dell-laptop.c54
-rw-r--r--drivers/platform/x86/eeepc-wmi.c25
-rw-r--r--drivers/platform/x86/samsung-laptop.c41
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c5
-rw-r--r--drivers/pwm/Kconfig108
-rw-r--r--drivers/pwm/Makefile11
-rw-r--r--drivers/pwm/core.c713
-rw-r--r--drivers/pwm/pwm-bfin.c162
-rw-r--r--drivers/pwm/pwm-imx.c (renamed from arch/arm/plat-mxc/pwm.c)204
-rw-r--r--drivers/pwm/pwm-lpc32xx.c148
-rw-r--r--drivers/pwm/pwm-mxs.c203
-rw-r--r--drivers/pwm/pwm-pxa.c218
-rw-r--r--drivers/pwm/pwm-samsung.c (renamed from arch/arm/plat-samsung/pwm.c)234
-rw-r--r--drivers/pwm/pwm-tegra.c261
-rw-r--r--drivers/pwm/pwm-tiecap.c232
-rw-r--r--drivers/pwm/pwm-tiehrpwm.c411
-rw-r--r--drivers/pwm/pwm-vt8500.c177
-rw-r--r--drivers/regulator/Kconfig2
-rw-r--r--drivers/regulator/ab8500.c6
-rw-r--r--drivers/regulator/db8500-prcmu.c6
-rw-r--r--drivers/regulator/s5m8767.c72
-rw-r--r--drivers/rtc/Kconfig10
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/rtc-88pm80x.c371
-rw-r--r--drivers/rtc/rtc-max8925.c13
-rw-r--r--drivers/spi/Kconfig9
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-falcon.c469
-rw-r--r--drivers/staging/octeon/ethernet-mdio.c28
-rw-r--r--drivers/staging/octeon/ethernet.c153
-rw-r--r--drivers/staging/octeon/octeon-ethernet.h3
-rw-r--r--drivers/usb/host/ehci-omap.c8
-rw-r--r--drivers/video/backlight/Kconfig2
-rw-r--r--drivers/video/backlight/pwm_bl.c159
-rw-r--r--fs/xfs/xfs_alloc_btree.h14
-rw-r--r--fs/xfs/xfs_aops.c79
-rw-r--r--fs/xfs/xfs_aops.h14
-rw-r--r--fs/xfs/xfs_attr.c78
-rw-r--r--fs/xfs/xfs_attr_leaf.c255
-rw-r--r--fs/xfs/xfs_attr_leaf.h21
-rw-r--r--fs/xfs/xfs_bmap.c2
-rw-r--r--fs/xfs/xfs_buf.c240
-rw-r--r--fs/xfs/xfs_buf.h116
-rw-r--r--fs/xfs/xfs_buf_item.c345
-rw-r--r--fs/xfs/xfs_buf_item.h38
-rw-r--r--fs/xfs/xfs_da_btree.c823
-rw-r--r--fs/xfs/xfs_da_btree.h38
-rw-r--r--fs/xfs/xfs_dinode.h2
-rw-r--r--fs/xfs/xfs_dir2.c4
-rw-r--r--fs/xfs/xfs_dir2_block.c118
-rw-r--r--fs/xfs/xfs_dir2_data.c50
-rw-r--r--fs/xfs/xfs_dir2_leaf.c621
-rw-r--r--fs/xfs/xfs_dir2_node.c236
-rw-r--r--fs/xfs/xfs_dir2_priv.h46
-rw-r--r--fs/xfs/xfs_dir2_sf.c4
-rw-r--r--fs/xfs/xfs_file.c19
-rw-r--r--fs/xfs/xfs_ialloc.c446
-rw-r--r--fs/xfs/xfs_ialloc.h2
-rw-r--r--fs/xfs/xfs_iget.c15
-rw-r--r--fs/xfs/xfs_inode.c208
-rw-r--r--fs/xfs/xfs_inode.h13
-rw-r--r--fs/xfs/xfs_iomap.c6
-rw-r--r--fs/xfs/xfs_iops.c45
-rw-r--r--fs/xfs/xfs_itable.c2
-rw-r--r--fs/xfs/xfs_log.c223
-rw-r--r--fs/xfs/xfs_log_priv.h18
-rw-r--r--fs/xfs/xfs_log_recover.c142
-rw-r--r--fs/xfs/xfs_mount.c11
-rw-r--r--fs/xfs/xfs_mount.h3
-rw-r--r--fs/xfs/xfs_qm.c2
-rw-r--r--fs/xfs/xfs_super.c88
-rw-r--r--fs/xfs/xfs_sync.c13
-rw-r--r--fs/xfs/xfs_trace.h2
-rw-r--r--fs/xfs/xfs_trans.h50
-rw-r--r--fs/xfs/xfs_trans_ail.c35
-rw-r--r--fs/xfs/xfs_trans_buf.c68
-rw-r--r--fs/xfs/xfs_trans_priv.h1
-rw-r--r--fs/xfs/xfs_types.h14
-rw-r--r--fs/xfs/xfs_utils.c17
-rw-r--r--fs/xfs/xfs_vnodeops.c285
-rw-r--r--include/asm-generic/dma-coherent.h1
-rw-r--r--include/asm-generic/dma-mapping-common.h55
-rw-r--r--include/drm/exynos_drm.h9
-rw-r--r--include/linux/acpi.h10
-rw-r--r--include/linux/device-mapper.h29
-rw-r--r--include/linux/dm-ioctl.h6
-rw-r--r--include/linux/dma-attrs.h2
-rw-r--r--include/linux/dma-mapping.h3
-rw-r--r--include/linux/edac.h208
-rw-r--r--include/linux/firewire.h4
-rw-r--r--include/linux/input/edt-ft5x06.h24
-rw-r--r--include/linux/key-type.h1
-rw-r--r--include/linux/libfdt.h8
-rw-r--r--include/linux/libfdt_env.h13
-rw-r--r--include/linux/mempolicy.h2
-rw-r--r--include/linux/mfd/88pm80x.h369
-rw-r--r--include/linux/mfd/88pm860x.h1
-rw-r--r--include/linux/mfd/abx500/ab8500.h5
-rw-r--r--include/linux/mfd/arizona/core.h114
-rw-r--r--include/linux/mfd/arizona/pdata.h119
-rw-r--r--include/linux/mfd/arizona/registers.h6594
-rw-r--r--include/linux/mfd/core.h5
-rw-r--r--include/linux/mfd/db8500-prcmu.h7
-rw-r--r--include/linux/mfd/dbx500-prcmu.h7
-rw-r--r--include/linux/mfd/max77686-private.h246
-rw-r--r--include/linux/mfd/max77686.h114
-rw-r--r--include/linux/mfd/max77693-private.h1
-rw-r--r--include/linux/mfd/max8997-private.h4
-rw-r--r--include/linux/mfd/max8997.h1
-rw-r--r--include/linux/mfd/s5m87xx/s5m-core.h379
-rw-r--r--include/linux/mfd/s5m87xx/s5m-pmic.h129
-rw-r--r--include/linux/mfd/samsung/core.h159
-rw-r--r--include/linux/mfd/samsung/irq.h152
-rw-r--r--include/linux/mfd/samsung/rtc.h (renamed from include/linux/mfd/s5m87xx/s5m-rtc.h)69
-rw-r--r--include/linux/mfd/samsung/s2mps11.h196
-rw-r--r--include/linux/mfd/samsung/s5m8763.h96
-rw-r--r--include/linux/mfd/samsung/s5m8767.h188
-rw-r--r--include/linux/mfd/tps65910.h1
-rw-r--r--include/linux/mfd/twl6040.h6
-rw-r--r--include/linux/mfd/wm8350/core.h26
-rw-r--r--include/linux/mfd/wm8994/pdata.h1
-rw-r--r--include/linux/mm_types.h11
-rw-r--r--include/linux/of.h16
-rw-r--r--include/linux/pwm.h117
-rw-r--r--include/linux/pwm_backlight.h1
-rw-r--r--include/linux/scatterlist.h4
-rw-r--r--include/linux/slab.h24
-rw-r--r--include/linux/slab_def.h12
-rw-r--r--include/linux/slub_def.h3
-rw-r--r--include/linux/virtio_blk.h10
-rw-r--r--include/linux/virtio_ids.h2
-rw-r--r--include/linux/vmalloc.h9
-rw-r--r--include/ras/ras_event.h102
-rw-r--r--lib/Kconfig6
-rw-r--r--lib/Makefile5
-rw-r--r--lib/fdt.c2
-rw-r--r--lib/fdt_ro.c2
-rw-r--r--lib/fdt_rw.c2
-rw-r--r--lib/fdt_strerror.c2
-rw-r--r--lib/fdt_sw.c2
-rw-r--r--lib/fdt_wip.c2
-rw-r--r--lib/scatterlist.c64
-rw-r--r--mm/Makefile3
-rw-r--r--mm/mempolicy.c8
-rw-r--r--mm/slab.c406
-rw-r--r--mm/slab.h33
-rw-r--r--mm/slab_common.c120
-rw-r--r--mm/slob.c152
-rw-r--r--mm/slub.c436
-rw-r--r--mm/vmalloc.c28
-rw-r--r--scripts/coccinelle/iterators/use_after_iter.cocci147
-rw-r--r--scripts/coccinelle/misc/irqf_oneshot.cocci65
-rwxr-xr-xscripts/config62
-rw-r--r--scripts/kconfig/.gitignore1
-rw-r--r--scripts/kconfig/Makefile41
-rw-r--r--scripts/kconfig/confdata.c61
-rw-r--r--scripts/kconfig/lxdialog/check-lxdialog.sh8
-rw-r--r--scripts/kconfig/lxdialog/textbox.c3
-rw-r--r--scripts/kconfig/mconf.c6
-rw-r--r--scripts/kconfig/nconf.c10
-rw-r--r--scripts/kconfig/nconf.gui.c8
-rw-r--r--scripts/kconfig/streamline_config.pl175
-rw-r--r--scripts/link-vmlinux.sh4
-rw-r--r--scripts/package/builddeb7
-rwxr-xr-xscripts/tags.sh6
-rw-r--r--security/selinux/hooks.c15
-rw-r--r--security/smack/smackfs.c8
-rw-r--r--sound/soc/codecs/twl6040.c2
-rwxr-xr-xtools/testing/ktest/ktest.pl167
-rw-r--r--tools/testing/ktest/sample.conf52
-rw-r--r--tools/vm/slabinfo.c14
619 files changed, 43806 insertions, 17363 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-firewire b/Documentation/ABI/stable/sysfs-bus-firewire
index 3d484e5dc846..41e5a0cd1e3e 100644
--- a/Documentation/ABI/stable/sysfs-bus-firewire
+++ b/Documentation/ABI/stable/sysfs-bus-firewire
@@ -39,6 +39,17 @@ Users: udev rules to set ownership and access permissions or ACLs of
/dev/fw[0-9]+ character device files
+What: /sys/bus/firewire/devices/fw[0-9]+/is_local
+Date: July 2012
+KernelVersion: 3.6
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 node device attribute.
+ Read-only and immutable.
+Values: 1: The sysfs entry represents a local node (a controller card).
+ 0: The sysfs entry represents a remote node.
+
+
What: /sys/bus/firewire/devices/fw[0-9]+[.][0-9]+/
Date: May 2007
KernelVersion: 2.6.22
diff --git a/Documentation/ABI/testing/sysfs-devices-edac b/Documentation/ABI/testing/sysfs-devices-edac
new file mode 100644
index 000000000000..30ee78aaed75
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-edac
@@ -0,0 +1,140 @@
+What: /sys/devices/system/edac/mc/mc*/reset_counters
+Date: January 2006
+Contact: linux-edac@vger.kernel.org
+Description: This write-only control file will zero all the statistical
+ counters for UE and CE errors on the given memory controller.
+ Zeroing the counters will also reset the timer indicating how
+ long since the last counter were reset. This is useful for
+ computing errors/time. Since the counters are always reset
+ at driver initialization time, no module/kernel parameter
+ is available.
+
+What: /sys/devices/system/edac/mc/mc*/seconds_since_reset
+Date: January 2006
+Contact: linux-edac@vger.kernel.org
+Description: This attribute file displays how many seconds have elapsed
+ since the last counter reset. This can be used with the error
+ counters to measure error rates.
+
+What: /sys/devices/system/edac/mc/mc*/mc_name
+Date: January 2006
+Contact: linux-edac@vger.kernel.org
+Description: This attribute file displays the type of memory controller
+ that is being utilized.
+
+What: /sys/devices/system/edac/mc/mc*/size_mb
+Date: January 2006
+Contact: linux-edac@vger.kernel.org
+Description: This attribute file displays, in count of megabytes, of memory
+ that this memory controller manages.
+
+What: /sys/devices/system/edac/mc/mc*/ue_count
+Date: January 2006
+Contact: linux-edac@vger.kernel.org
+Description: This attribute file displays the total count of uncorrectable
+ errors that have occurred on this memory controller. If
+ panic_on_ue is set, this counter will not have a chance to
+ increment, since EDAC will panic the system
+
+What: /sys/devices/system/edac/mc/mc*/ue_noinfo_count
+Date: January 2006
+Contact: linux-edac@vger.kernel.org
+Description: This attribute file displays the number of UEs that have
+ occurred on this memory controller with no information as to
+ which DIMM slot is having errors.
+
+What: /sys/devices/system/edac/mc/mc*/ce_count
+Date: January 2006
+Contact: linux-edac@vger.kernel.org
+Description: This attribute file displays the total count of correctable
+ errors that have occurred on this memory controller. This
+ count is very important to examine. CEs provide early
+ indications that a DIMM is beginning to fail. This count
+ field should be monitored for non-zero values and report
+ such information to the system administrator.
+
+What: /sys/devices/system/edac/mc/mc*/ce_noinfo_count
+Date: January 2006
+Contact: linux-edac@vger.kernel.org
+Description: This attribute file displays the number of CEs that
+ have occurred on this memory controller wherewith no
+ information as to which DIMM slot is having errors. Memory is
+ handicapped, but operational, yet no information is available
+ to indicate which slot the failing memory is in. This count
+ field should be also be monitored for non-zero values.
+
+What: /sys/devices/system/edac/mc/mc*/sdram_scrub_rate
+Date: February 2007
+Contact: linux-edac@vger.kernel.org
+Description: Read/Write attribute file that controls memory scrubbing.
+ The scrubbing rate used by the memory controller is set by
+ writing a minimum bandwidth in bytes/sec to the attribute file.
+ The rate will be translated to an internal value that gives at
+ least the specified rate.
+ Reading the file will return the actual scrubbing rate employed.
+ If configuration fails or memory scrubbing is not implemented,
+ the value of the attribute file will be -1.
+
+What: /sys/devices/system/edac/mc/mc*/max_location
+Date: April 2012
+Contact: Mauro Carvalho Chehab <mchehab@redhat.com>
+ linux-edac@vger.kernel.org
+Description: This attribute file displays the information about the last
+ available memory slot in this memory controller. It is used by
+ userspace tools in order to display the memory filling layout.
+
+What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/size
+Date: April 2012
+Contact: Mauro Carvalho Chehab <mchehab@redhat.com>
+ linux-edac@vger.kernel.org
+Description: This attribute file will display the size of dimm or rank.
+ For dimm*/size, this is the size, in MB of the DIMM memory
+ stick. For rank*/size, this is the size, in MB for one rank
+ of the DIMM memory stick. On single rank memories (1R), this
+ is also the total size of the dimm. On dual rank (2R) memories,
+ this is half the size of the total DIMM memories.
+
+What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_dev_type
+Date: April 2012
+Contact: Mauro Carvalho Chehab <mchehab@redhat.com>
+ linux-edac@vger.kernel.org
+Description: This attribute file will display what type of DRAM device is
+ being utilized on this DIMM (x1, x2, x4, x8, ...).
+
+What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_edac_mode
+Date: April 2012
+Contact: Mauro Carvalho Chehab <mchehab@redhat.com>
+ linux-edac@vger.kernel.org
+Description: This attribute file will display what type of Error detection
+ and correction is being utilized. For example: S4ECD4ED would
+ mean a Chipkill with x4 DRAM.
+
+What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_label
+Date: April 2012
+Contact: Mauro Carvalho Chehab <mchehab@redhat.com>
+ linux-edac@vger.kernel.org
+Description: This control file allows this DIMM to have a label assigned
+ to it. With this label in the module, when errors occur
+ the output can provide the DIMM label in the system log.
+ This becomes vital for panic events to isolate the
+ cause of the UE event.
+ DIMM Labels must be assigned after booting, with information
+ that correctly identifies the physical slot with its
+ silk screen label. This information is currently very
+ motherboard specific and determination of this information
+ must occur in userland at this time.
+
+What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_location
+Date: April 2012
+Contact: Mauro Carvalho Chehab <mchehab@redhat.com>
+ linux-edac@vger.kernel.org
+Description: This attribute file will display the location (csrow/channel,
+ branch/channel/slot or channel/slot) of the dimm or rank.
+
+What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_mem_type
+Date: April 2012
+Contact: Mauro Carvalho Chehab <mchehab@redhat.com>
+ linux-edac@vger.kernel.org
+Description: This attribute file will display what type of memory is
+ currently on this csrow. Normally, either buffered or
+ unbuffered memory (for example, Unbuffered-DDR3).
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi
index 2e7df91620de..019e1e29370e 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-wmi
+++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -29,3 +29,10 @@ KernelVersion: 2.6.39
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the card touchpad. 1 means on, 0 means off.
+
+What: /sys/devices/platform/<platform>/lid_resume
+Date: May 2012
+KernelVersion: 3.5
+Contact: "AceLan Kao" <acelan.kao@canonical.com>
+Description:
+ Resume on lid open. 1 means on, 0 means off.
diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt
index 5c72eed89563..f50309081ac7 100644
--- a/Documentation/DMA-attributes.txt
+++ b/Documentation/DMA-attributes.txt
@@ -49,3 +49,45 @@ DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either
consistent or non-consistent memory as it sees fit. By using this API,
you are guaranteeing to the platform that you have all the correct and
necessary sync points for this memory in the driver.
+
+DMA_ATTR_NO_KERNEL_MAPPING
+--------------------------
+
+DMA_ATTR_NO_KERNEL_MAPPING lets the platform to avoid creating a kernel
+virtual mapping for the allocated buffer. On some architectures creating
+such mapping is non-trivial task and consumes very limited resources
+(like kernel virtual address space or dma consistent address space).
+Buffers allocated with this attribute can be only passed to user space
+by calling dma_mmap_attrs(). By using this API, you are guaranteeing
+that you won't dereference the pointer returned by dma_alloc_attr(). You
+can threat it as a cookie that must be passed to dma_mmap_attrs() and
+dma_free_attrs(). Make sure that both of these also get this attribute
+set on each call.
+
+Since it is optional for platforms to implement
+DMA_ATTR_NO_KERNEL_MAPPING, those that do not will simply ignore the
+attribute and exhibit default behavior.
+
+DMA_ATTR_SKIP_CPU_SYNC
+----------------------
+
+By default dma_map_{single,page,sg} functions family transfer a given
+buffer from CPU domain to device domain. Some advanced use cases might
+require sharing a buffer between more than one device. This requires
+having a mapping created separately for each device and is usually
+performed by calling dma_map_{single,page,sg} function more than once
+for the given buffer with device pointer to each device taking part in
+the buffer sharing. The first call transfers a buffer from 'CPU' domain
+to 'device' domain, what synchronizes CPU caches for the given region
+(usually it means that the cache has been flushed or invalidated
+depending on the dma direction). However, next calls to
+dma_map_{single,page,sg}() for other devices will perform exactly the
+same sychronization operation on the CPU cache. CPU cache sychronization
+might be a time consuming operation, especially if the buffers are
+large, so it is highly recommended to avoid it if possible.
+DMA_ATTR_SKIP_CPU_SYNC allows platform code to skip synchronization of
+the CPU cache for the given buffer assuming that it has been already
+transferred to 'device' domain. This attribute can be also used for
+dma_unmap_{single,page,sg} functions family to force buffer to stay in
+device domain after releasing a mapping for it. Use this attribute with
+care!
diff --git a/Documentation/device-mapper/striped.txt b/Documentation/device-mapper/striped.txt
index f34d3236b9da..45f3b91ea4c3 100644
--- a/Documentation/device-mapper/striped.txt
+++ b/Documentation/device-mapper/striped.txt
@@ -9,15 +9,14 @@ devices in parallel.
Parameters: <num devs> <chunk size> [<dev path> <offset>]+
<num devs>: Number of underlying devices.
- <chunk size>: Size of each chunk of data. Must be a power-of-2 and at
- least as large as the system's PAGE_SIZE.
+ <chunk size>: Size of each chunk of data. Must be at least as
+ large as the system's PAGE_SIZE.
<dev path>: Full pathname to the underlying block-device, or a
"major:minor" device-number.
<offset>: Starting sector within the device.
One or more underlying devices can be specified. The striped device size must
-be a multiple of the chunk size and a multiple of the number of underlying
-devices.
+be a multiple of the chunk size multiplied by the number of underlying devices.
Example scripts
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index f5cfc62b7ad3..30b8b83bd333 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -231,6 +231,9 @@ i) Constructor
no_discard_passdown: Don't pass discards down to the underlying
data device, but just remove the mapping.
+ read_only: Don't allow any changes to be made to the pool
+ metadata.
+
Data block size must be between 64KB (128 sectors) and 1GB
(2097152 sectors) inclusive.
@@ -239,7 +242,7 @@ ii) Status
<transaction id> <used metadata blocks>/<total metadata blocks>
<used data blocks>/<total data blocks> <held metadata root>
-
+ [no_]discard_passdown ro|rw
transaction id:
A 64-bit number used by userspace to help synchronise with metadata
@@ -257,6 +260,21 @@ ii) Status
held root. This feature is not yet implemented so '-' is
always returned.
+ discard_passdown|no_discard_passdown
+ Whether or not discards are actually being passed down to the
+ underlying device. When this is enabled when loading the table,
+ it can get disabled if the underlying device doesn't support it.
+
+ ro|rw
+ If the pool encounters certain types of device failures it will
+ drop into a read-only metadata mode in which no changes to
+ the pool metadata (like allocating new blocks) are permitted.
+
+ In serious cases where even a read-only mode is deemed unsafe
+ no further I/O will be permitted and the status will just
+ contain the string 'Fail'. The userspace recovery tools
+ should then be used.
+
iii) Messages
create_thin <dev id>
@@ -329,3 +347,7 @@ regain some space then send the 'trim' message to the pool.
ii) Status
<nr mapped sectors> <highest mapped sector>
+
+ If the pool has encountered device errors and failed, the status
+ will just contain the string 'Fail'. The userspace recovery
+ tools should then be used.
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
new file mode 100644
index 000000000000..94e642a33db0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt
@@ -0,0 +1,15 @@
+Calxeda Highbank L2 cache ECC
+
+Properties:
+- compatible : Should be "calxeda,hb-sregs-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt.
+
+Example:
+
+ sregs@fff3c200 {
+ compatible = "calxeda,hb-sregs-l2-ecc";
+ reg = <0xfff3c200 0x100>;
+ interrupts = <0 71 4 0 72 4>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
new file mode 100644
index 000000000000..f770ac0893d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
@@ -0,0 +1,14 @@
+Calxeda DDR memory controller
+
+Properties:
+- compatible : Should be "calxeda,hb-ddr-ctrl"
+- reg : Address and size for DDR controller registers.
+- interrupts : Interrupt for DDR controller.
+
+Example:
+
+ memory-controller@fff00000 {
+ compatible = "calxeda,hb-ddr-ctrl";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 91 4>;
+ };
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
new file mode 100644
index 000000000000..93986a5a8018
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -0,0 +1,30 @@
+* Compact Flash
+
+The Cavium Compact Flash device is connected to the Octeon Boot Bus,
+and is thus a child of the Boot Bus device. It can read and write
+industry standard compact flash devices.
+
+Properties:
+- compatible: "cavium,ebt3000-compact-flash";
+
+ Compatibility with many Cavium evaluation boards.
+
+- reg: The base address of the the CF chip select banks. Depending on
+ the device configuration, there may be one or two banks.
+
+- cavium,bus-width: The width of the connection to the CF devices. Valid
+ values are 8 and 16.
+
+- cavium,true-ide: Optional, if present the CF connection is in True IDE mode.
+
+- cavium,dma-engine-handle: Optional, a phandle for the DMA Engine connected
+ to this device.
+
+Example:
+ compact-flash@5,0 {
+ compatible = "cavium,ebt3000-compact-flash";
+ reg = <5 0 0x10000>, <6 0 0x10000>;
+ cavium,bus-width = <16>;
+ cavium,true-ide;
+ cavium,dma-engine-handle = <&dma0>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt
new file mode 100644
index 000000000000..9d6dcd3fe7f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt
@@ -0,0 +1,49 @@
+* General Purpose Input Output (GPIO) bus.
+
+Properties:
+- compatible: "cavium,octeon-3860-gpio"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the GPIO unit's register bank.
+
+- gpio-controller: This is a GPIO controller.
+
+- #gpio-cells: Must be <2>. The first cell is the GPIO pin.
+
+- interrupt-controller: The GPIO controller is also an interrupt
+ controller, many of its pins may be configured as an interrupt
+ source.
+
+- #interrupt-cells: Must be <2>. The first cell is the GPIO pin
+ connected to the interrupt source. The second cell is the interrupt
+ triggering protocol and may have one of four values:
+ 1 - edge triggered on the rising edge.
+ 2 - edge triggered on the falling edge
+ 4 - level triggered active high.
+ 8 - level triggered active low.
+
+- interrupts: Interrupt routing for each pin.
+
+Example:
+
+ gpio-controller@1070000000800 {
+ #gpio-cells = <2>;
+ compatible = "cavium,octeon-3860-gpio";
+ reg = <0x10700 0x00000800 0x0 0x100>;
+ gpio-controller;
+ /* Interrupts are specified by two parts:
+ * 1) GPIO pin number (0..15)
+ * 2) Triggering (1 - edge rising
+ * 2 - edge falling
+ * 4 - level active high
+ * 8 - level active low)
+ */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* The GPIO pin connect to 16 consecutive CUI bits */
+ interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+ <0 20>, <0 21>, <0 22>, <0 23>,
+ <0 24>, <0 25>, <0 26>, <0 27>,
+ <0 28>, <0 29>, <0 30>, <0 31>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/cavium-i2c.txt b/Documentation/devicetree/bindings/i2c/cavium-i2c.txt
new file mode 100644
index 000000000000..dced82ebe31d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/cavium-i2c.txt
@@ -0,0 +1,34 @@
+* Two Wire Serial Interface (TWSI) / I2C
+
+- compatible: "cavium,octeon-3860-twsi"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the TWSI/I2C bus controller register bank.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>. I2C addresses have no size component.
+
+- interrupts: A single interrupt specifier.
+
+- clock-frequency: The I2C bus clock rate in Hz.
+
+Example:
+ twsi0: i2c@1180000001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001000 0x0 0x200>;
+ interrupts = <0 45>;
+ clock-frequency = <100000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ tmp@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
new file mode 100644
index 000000000000..69e757a657a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -0,0 +1,123 @@
+* AB8500 Multi-Functional Device (MFD)
+
+Required parent device properties:
+- compatible : contains "stericsson,ab8500";
+- interrupts : contains the IRQ line for the AB8500
+- interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain)
+- #interrupt-cells : should be 2, for 2-cell format
+ - The first cell is the AB8500 local IRQ number
+ - The second cell is used to specify optional parameters
+ - bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
+Optional parent device properties:
+- reg : contains the PRCMU mailbox address for the AB8500 i2c port
+
+The AB8500 consists of a large and varied group of sub-devices:
+
+Device IRQ Names Supply Names Description
+------ --------- ------------ -----------
+ab8500-bm : : : Battery Manager
+ab8500-btemp : : : Battery Temperature
+ab8500-charger : : : Battery Charger
+ab8500-fg : : : Fuel Gauge
+ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
+ SW_CONV_END : :
+ab8500-gpio : : : GPIO Controller
+ab8500-ponkey : ONKEY_DBF : : Power-on Key
+ ONKEY_DBR : :
+ab8500-pwm : : : Pulse Width Modulator
+ab8500-regulator : : : Regulators
+ab8500-rtc : 60S : : Real Time Clock
+ : ALARM : :
+ab8500-sysctrl : : : System Control
+ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus
+ : ID_WAKEUP_F : v-ape :
+ : VBUS_DET_F : musb_1v8 :
+ : VBUS_DET_R : :
+ : USB_LINK_STATUS : :
+ : USB_ADP_PROBE_PLUG : :
+ : USB_ADP_PROBE_UNPLUG : :
+
+Required child device properties:
+- compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
+ pwm|regulator|rtc|sysctrl|usb]";
+
+Optional child device properties:
+- interrupts : contains the device IRQ(s) using the 2-cell format (see above)
+- interrupt-names : contains names of IRQ resource in the order in which they were
+ supplied in the interrupts property
+- <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree
+
+ab8500@5 {
+ compatible = "stericsson,ab8500";
+ reg = <5>; /* mailbox 5 is i2c */
+ interrupts = <0 40 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ab8500-rtc {
+ compatible = "stericsson,ab8500-rtc";
+ interrupts = <17 0x4
+ 18 0x4>;
+ interrupt-names = "60S", "ALARM";
+ };
+
+ ab8500-gpadc {
+ compatible = "stericsson,ab8500-gpadc";
+ interrupts = <32 0x4
+ 39 0x4>;
+ interrupt-names = "HW_CONV_END", "SW_CONV_END";
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ };
+
+ ab8500-usb {
+ compatible = "stericsson,ab8500-usb";
+ interrupts = < 90 0x4
+ 96 0x4
+ 14 0x4
+ 15 0x4
+ 79 0x4
+ 74 0x4
+ 75 0x4>;
+ interrupt-names = "ID_WAKEUP_R",
+ "ID_WAKEUP_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_ADP_PROBE_PLUG",
+ "USB_ADP_PROBE_UNPLUG";
+ vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+ v-ape-supply = <&db8500_vape_reg>;
+ musb_1v8-supply = <&db8500_vsmps2_reg>;
+ };
+
+ ab8500-ponkey {
+ compatible = "stericsson,ab8500-ponkey";
+ interrupts = <6 0x4
+ 7 0x4>;
+ interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+ };
+
+ ab8500-sysctrl {
+ compatible = "stericsson,ab8500-sysctrl";
+ };
+
+ ab8500-pwm {
+ compatible = "stericsson,ab8500-pwm";
+ };
+
+ ab8500-regulators {
+ compatible = "stericsson,ab8500-regulator";
+
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ /*
+ * See: Documentation/devicetree/bindings/regulator/regulator.txt
+ * for more information on regulators
+ */
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
new file mode 100644
index 000000000000..c6a3469d3436
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -0,0 +1,59 @@
+Maxim MAX77686 multi-function device
+
+MAX77686 is a Mulitifunction device with PMIC, RTC and Charger on chip. It is
+interfaced to host controller using i2c interface. PMIC and Charger submodules
+are addressed using same i2c slave address whereas RTC submodule uses
+different i2c slave address,presently for which we are statically creating i2c
+client while probing.This document describes the binding for mfd device and
+PMIC submodule.
+
+Required properties:
+- compatible : Must be "maxim,max77686";
+- reg : Specifies the i2c slave address of PMIC block.
+- interrupts : This i2c device has an IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+ under subnode named "voltage-regulators" using the following format.
+
+ regulator_name {
+ regulator-compatible = LDOn/BUCKn
+ standard regulator constraints....
+ };
+ refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ The regulator-compatible property of regulator should initialized with string
+to get matched with their hardware counterparts as follow:
+
+ -LDOn : for LDOs, where n can lie in range 1 to 26.
+ example: LDO1, LDO2, LDO26.
+ -BUCKn : for BUCKs, where n can lie in range 1 to 9.
+ example: BUCK1, BUCK5, BUCK9.
+
+Example:
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo11_reg {
+ regulator-compatible = "LDO11";
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ };
+
+ buck1_reg {
+ regulator-compatible = "BUCK1";
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ }
diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index d2802d4717bc..db03599ae4dc 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -81,7 +81,7 @@ Example:
ti,vmbch-threshold = 0;
ti,vmbch2-threshold = 0;
-
+ ti,en-ck32k-xtal;
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
vcc1-supply = <&reg_parent>;
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
index bc67c6f424aa..c855240f3a0e 100644
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -6,7 +6,7 @@ They are connected ot the host processor via i2c for commands, McPDM for audio
data and commands.
Required properties:
-- compatible : Must be "ti,twl6040";
+- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
- reg: must be 0x4b for i2c address
- interrupts: twl6040 has one interrupt line connecteded to the main SoC
- interrupt-parent: The parent interrupt controller
diff --git a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
new file mode 100644
index 000000000000..6581478225a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
@@ -0,0 +1,126 @@
+* Boot Bus
+
+The Octeon Boot Bus is a configurable parallel bus with 8 chip
+selects. Each chip select is independently configurable.
+
+Properties:
+- compatible: "cavium,octeon-3860-bootbus"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the Boot Bus' register bank.
+
+- #address-cells: Must be <2>. The first cell is the chip select
+ within the bootbus. The second cell is the offset from the chip select.
+
+- #size-cells: Must be <1>.
+
+- ranges: There must be one one triplet of (child-bus-address,
+ parent-bus-address, length) for each active chip select. If the
+ length element for any triplet is zero, the chip select is disabled,
+ making it inactive.
+
+The configuration parameters for each chip select are stored in child
+nodes.
+
+Configuration Properties:
+- compatible: "cavium,octeon-3860-bootbus-config"
+
+- cavium,cs-index: A single cell indicating the chip select that
+ corresponds to this configuration.
+
+- cavium,t-adr: A cell specifying the ADR timing (in nS).
+
+- cavium,t-ce: A cell specifying the CE timing (in nS).
+
+- cavium,t-oe: A cell specifying the OE timing (in nS).
+
+- cavium,t-we: A cell specifying the WE timing (in nS).
+
+- cavium,t-rd-hld: A cell specifying the RD_HLD timing (in nS).
+
+- cavium,t-wr-hld: A cell specifying the WR_HLD timing (in nS).
+
+- cavium,t-pause: A cell specifying the PAUSE timing (in nS).
+
+- cavium,t-wait: A cell specifying the WAIT timing (in nS).
+
+- cavium,t-page: A cell specifying the PAGE timing (in nS).
+
+- cavium,t-rd-dly: A cell specifying the RD_DLY timing (in nS).
+
+- cavium,pages: A cell specifying the PAGES parameter (0 = 8 bytes, 1
+ = 2 bytes, 2 = 4 bytes, 3 = 8 bytes).
+
+- cavium,wait-mode: Optional. If present, wait mode (WAITM) is selected.
+
+- cavium,page-mode: Optional. If present, page mode (PAGEM) is selected.
+
+- cavium,bus-width: A cell specifying the WIDTH parameter (in bits) of
+ the bus for this chip select.
+
+- cavium,ale-mode: Optional. If present, ALE mode is selected.
+
+- cavium,sam-mode: Optional. If present, SAM mode is selected.
+
+- cavium,or-mode: Optional. If present, OR mode is selected.
+
+Example:
+ bootbus: bootbus@1180000000000 {
+ compatible = "cavium,octeon-3860-bootbus";
+ reg = <0x11800 0x00000000 0x0 0x200>;
+ /* The chip select number and offset */
+ #address-cells = <2>;
+ /* The size of the chip select region */
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x1f400000 0xc00000>,
+ <1 0 0x10000 0x30000000 0>,
+ <2 0 0x10000 0x40000000 0>,
+ <3 0 0x10000 0x50000000 0>,
+ <4 0 0x0 0x1d020000 0x10000>,
+ <5 0 0x0 0x1d040000 0x10000>,
+ <6 0 0x0 0x1d050000 0x10000>,
+ <7 0 0x10000 0x90000000 0>;
+
+ cavium,cs-config@0 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <0>;
+ cavium,t-adr = <20>;
+ cavium,t-ce = <60>;
+ cavium,t-oe = <60>;
+ cavium,t-we = <45>;
+ cavium,t-rd-hld = <35>;
+ cavium,t-wr-hld = <45>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <0>;
+ cavium,t-page = <35>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ .
+ .
+ .
+ cavium,cs-config@6 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <6>;
+ cavium,t-adr = <5>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <270>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <70>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <0>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,wait-mode;
+ cavium,bus-width = <16>;
+ };
+ .
+ .
+ .
+ };
diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu.txt b/Documentation/devicetree/bindings/mips/cavium/ciu.txt
new file mode 100644
index 000000000000..2c2d0746b43d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/ciu.txt
@@ -0,0 +1,26 @@
+* Central Interrupt Unit
+
+Properties:
+- compatible: "cavium,octeon-3860-ciu"
+
+ Compatibility with all cn3XXX, cn5XXX and cn63XX SOCs.
+
+- interrupt-controller: This is an interrupt controller.
+
+- reg: The base address of the CIU's register bank.
+
+- #interrupt-cells: Must be <2>. The first cell is the bank within
+ the CIU and may have a value of 0 or 1. The second cell is the bit
+ within the bank and may have a value between 0 and 63.
+
+Example:
+ interrupt-controller@1070000000000 {
+ compatible = "cavium,octeon-3860-ciu";
+ interrupt-controller;
+ /* Interrupts are specified by two parts:
+ * 1) Controller register (0 or 1)
+ * 2) Bit within the register (0..63)
+ */
+ #interrupt-cells = <2>;
+ reg = <0x10700 0x00000000 0x0 0x7000>;
+ };
diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu2.txt b/Documentation/devicetree/bindings/mips/cavium/ciu2.txt
new file mode 100644
index 000000000000..0ec7ba8bbbcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/ciu2.txt
@@ -0,0 +1,27 @@
+* Central Interrupt Unit
+
+Properties:
+- compatible: "cavium,octeon-6880-ciu2"
+
+ Compatibility with 68XX SOCs.
+
+- interrupt-controller: This is an interrupt controller.
+
+- reg: The base address of the CIU's register bank.
+
+- #interrupt-cells: Must be <2>. The first cell is the bank within
+ the CIU and may have a value between 0 and 63. The second cell is
+ the bit within the bank and may also have a value between 0 and 63.
+
+Example:
+ interrupt-controller@1070100000000 {
+ compatible = "cavium,octeon-6880-ciu2";
+ interrupt-controller;
+ /* Interrupts are specified by two parts:
+ * 1) Controller register (0..63)
+ * 2) Bit within the register (0..63)
+ */
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x10701 0x00000000 0x0 0x4000000>;
+ };
diff --git a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
new file mode 100644
index 000000000000..cb4291e3b1d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
@@ -0,0 +1,21 @@
+* DMA Engine.
+
+The Octeon DMA Engine transfers between the Boot Bus and main memory.
+The DMA Engine will be refered to by phandle by any device that is
+connected to it.
+
+Properties:
+- compatible: "cavium,octeon-5750-bootbus-dma"
+
+ Compatibility with all cn52XX, cn56XX and cn6XXX SOCs.
+
+- reg: The base address of the DMA Engine's register bank.
+
+- interrupts: A single interrupt specifier.
+
+Example:
+ dma0: dma-engine@1180000000100 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000100 0x0 0x8>;
+ interrupts = <0 63>;
+ };
diff --git a/Documentation/devicetree/bindings/mips/cavium/uctl.txt b/Documentation/devicetree/bindings/mips/cavium/uctl.txt
new file mode 100644
index 000000000000..aa66b9b8d801
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/uctl.txt
@@ -0,0 +1,46 @@
+* UCTL USB controller glue
+
+Properties:
+- compatible: "cavium,octeon-6335-uctl"
+
+ Compatibility with all cn6XXX SOCs.
+
+- reg: The base address of the UCTL register bank.
+
+- #address-cells: Must be <2>.
+
+- #size-cells: Must be <2>.
+
+- ranges: Empty to signify direct mapping of the children.
+
+- refclk-frequency: A single cell containing the reference clock
+ frequency in Hz.
+
+- refclk-type: A string describing the reference clock connection
+ either "crystal" or "external".
+
+Example:
+ uctl@118006f000000 {
+ compatible = "cavium,octeon-6335-uctl";
+ reg = <0x11800 0x6f000000 0x0 0x100>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <24000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+
+ ehci@16f0000000000 {
+ compatible = "cavium,octeon-6335-ehci","usb-ehci";
+ reg = <0x16f00 0x00000000 0x0 0x100>;
+ interrupts = <0 56>;
+ big-endian-regs;
+ };
+ ohci@16f0000000400 {
+ compatible = "cavium,octeon-6335-ohci","usb-ohci";
+ reg = <0x16f00 0x00000400 0x0 0x100>;
+ interrupts = <0 56>;
+ big-endian-regs;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt
new file mode 100644
index 000000000000..04cb7491d232
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt
@@ -0,0 +1,27 @@
+* System Management Interface (SMI) / MDIO
+
+Properties:
+- compatible: "cavium,octeon-3860-mdio"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the MDIO bus controller register bank.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>. MDIO addresses have no size component.
+
+Typically an MDIO bus might have several children.
+
+Example:
+ mdio@1180000001800 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00001800 0x0 0x40>;
+
+ ethernet-phy@0 {
+ ...
+ reg = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/cavium-mix.txt b/Documentation/devicetree/bindings/net/cavium-mix.txt
new file mode 100644
index 000000000000..5da628db68bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-mix.txt
@@ -0,0 +1,39 @@
+* MIX Ethernet controller.
+
+Properties:
+- compatible: "cavium,octeon-5750-mix"
+
+ Compatibility with all cn5XXX and cn6XXX SOCs populated with MIX
+ devices.
+
+- reg: The base addresses of four separate register banks. The first
+ bank contains the MIX registers. The second bank the corresponding
+ AGL registers. The third bank are the AGL registers shared by all
+ MIX devices present. The fourth bank is the AGL_PRT_CTL shared by
+ all MIX devices present.
+
+- cell-index: A single cell specifying which portion of the shared
+ register banks corresponds to this MIX device.
+
+- interrupts: Two interrupt specifiers. The first is the MIX
+ interrupt routing and the second the routing for the AGL interrupts.
+
+- mac-address: Optional, the MAC address to assign to the device.
+
+- local-mac-address: Optional, the MAC address to assign to the device
+ if mac-address is not specified.
+
+- phy-handle: Optional, a phandle for the PHY device connected to this device.
+
+Example:
+ ethernet@1070000100800 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000800 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <1>;
+ interrupts = <1 18>, < 1 46>;
+ local-mac-address = [ 00 0f b7 10 63 54 ];
+ phy-handle = <&phy1>;
+ };
diff --git a/Documentation/devicetree/bindings/net/cavium-pip.txt b/Documentation/devicetree/bindings/net/cavium-pip.txt
new file mode 100644
index 000000000000..d4c53ba04b3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-pip.txt
@@ -0,0 +1,98 @@
+* PIP Ethernet nexus.
+
+The PIP Ethernet nexus can control several data packet input/output
+devices. The devices have a two level grouping scheme. There may be
+several interfaces, and each interface may have several ports. These
+ports might be an individual Ethernet PHY.
+
+
+Properties for the PIP nexus:
+- compatible: "cavium,octeon-3860-pip"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the PIP's register bank.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>.
+
+Properties for PIP interfaces which is a child the PIP nexus:
+- compatible: "cavium,octeon-3860-pip-interface"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The interface number.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>.
+
+Properties for PIP port which is a child the PIP interface:
+- compatible: "cavium,octeon-3860-pip-port"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The port number within the interface group.
+
+- mac-address: Optional, the MAC address to assign to the device.
+
+- local-mac-address: Optional, the MAC address to assign to the device
+ if mac-address is not specified.
+
+- phy-handle: Optional, a phandle for the PHY device connected to this device.
+
+Example:
+
+ pip@11800a0000000 {
+ compatible = "cavium,octeon-3860-pip";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+ interface@0 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 0f b7 10 63 60 ];
+ phy-handle = <&phy2>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 0f b7 10 63 61 ];
+ phy-handle = <&phy3>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 0f b7 10 63 62 ];
+ phy-handle = <&phy4>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 0f b7 10 63 63 ];
+ phy-handle = <&phy5>;
+ };
+ };
+
+ interface@1 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 0f b7 10 63 64 ];
+ phy-handle = <&phy6>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt
new file mode 100644
index 000000000000..cfe1db3bb6e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt
@@ -0,0 +1,12 @@
+LPC32XX PWM controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-pwm"
+- reg: physical base address and length of the controller's registers
+
+Examples:
+
+pwm@0x4005C000 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005C000 0x8>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
new file mode 100644
index 000000000000..b16f4a57d111
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
@@ -0,0 +1,17 @@
+Freescale MXS PWM controller
+
+Required properties:
+- compatible: should be "fsl,imx23-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. The first cell specifies the per-chip index
+ of the PWM to use and the second cell is the duty cycle in nanoseconds.
+- fsl,pwm-number: the number of PWM devices
+
+Example:
+
+pwm: pwm@80064000 {
+ compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+ reg = <0x80064000 2000>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <8>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
new file mode 100644
index 000000000000..bbbeedb4ec05
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -0,0 +1,18 @@
+Tegra SoC PWFM controller
+
+Required properties:
+- compatible: should be one of:
+ - "nvidia,tegra20-pwm"
+ - "nvidia,tegra30-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The
+ first cell specifies the per-chip index of the PWM to use and the second
+ cell is the duty cycle in nanoseconds.
+
+Example:
+
+ pwm: pwm@7000a000 {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt
new file mode 100644
index 000000000000..73ec962bfe8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm.txt
@@ -0,0 +1,57 @@
+Specifying PWM information for devices
+======================================
+
+1) PWM user nodes
+-----------------
+
+PWM users should specify a list of PWM devices that they want to use
+with a property containing a 'pwm-list':
+
+ pwm-list ::= <single-pwm> [pwm-list]
+ single-pwm ::= <pwm-phandle> <pwm-specifier>
+ pwm-phandle : phandle to PWM controller node
+ pwm-specifier : array of #pwm-cells specifying the given PWM
+ (controller specific)
+
+PWM properties should be named "pwms". The exact meaning of each pwms
+property must be documented in the device tree binding for each device.
+An optional property "pwm-names" may contain a list of strings to label
+each of the PWM devices listed in the "pwms" property. If no "pwm-names"
+property is given, the name of the user node will be used as fallback.
+
+Drivers for devices that use more than a single PWM device can use the
+"pwm-names" property to map the name of the PWM device requested by the
+pwm_get() call to an index into the list given by the "pwms" property.
+
+The following example could be used to describe a PWM-based backlight
+device:
+
+ pwm: pwm {
+ #pwm-cells = <2>;
+ };
+
+ [...]
+
+ bl: backlight {
+ pwms = <&pwm 0 5000000>;
+ pwm-names = "backlight";
+ };
+
+pwm-specifier typically encodes the chip-relative PWM number and the PWM
+period in nanoseconds. Note that in the example above, specifying the
+"pwm-names" is redundant because the name "backlight" would be used as
+fallback anyway.
+
+2) PWM controller nodes
+-----------------------
+
+PWM controller nodes must specify the number of cells used for the
+specifier using the '#pwm-cells' property.
+
+An example PWM controller might look like this:
+
+ pwm: pwm@7000a000 {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/cavium-uart.txt b/Documentation/devicetree/bindings/serial/cavium-uart.txt
new file mode 100644
index 000000000000..87a6c375cd44
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cavium-uart.txt
@@ -0,0 +1,19 @@
+* Universal Asynchronous Receiver/Transmitter (UART)
+
+- compatible: "cavium,octeon-3860-uart"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the UART register bank.
+
+- interrupts: A single interrupt specifier.
+
+- current-speed: Optional, the current bit rate in bits per second.
+
+Example:
+ uart1: serial@1180000000c00 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000c00 0x0 0x400>;
+ current-speed = <115200>;
+ interrupts = <0 35>;
+ };
diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
new file mode 100644
index 000000000000..1e4fc727f3b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
@@ -0,0 +1,28 @@
+pwm-backlight bindings
+
+Required properties:
+ - compatible: "pwm-backlight"
+ - pwms: OF device-tree PWM specification (see PWM binding[0])
+ - brightness-levels: Array of distinct brightness levels. Typically these
+ are in the range from 0 to 255, but any range starting at 0 will do.
+ The actual brightness level (PWM duty cycle) will be interpolated
+ from these values. 0 means a 0% duty cycle (darkest/off), while the
+ last value in the array represents a 100% duty cycle (brightest).
+ - default-brightness-level: the default brightness level (index into the
+ array defined by the "brightness-levels" property)
+
+Optional properties:
+ - pwm-names: a list of names for the PWM devices specified in the
+ "pwms" property (see PWM binding[0])
+
+[0]: Documentation/devicetree/bindings/pwm/pwm.txt
+
+Example:
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index b4a898f43c37..39462cf35cd4 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -150,7 +150,6 @@ keywords.c
ksym.c*
ksym.h*
kxgettext
-lkc_defs.h
lex.c
lex.*.c
linux
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 03df2b020332..56c7e936430f 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -232,116 +232,20 @@ EDAC control and attribute files.
In 'mcX' directories are EDAC control and attribute files for
-this 'X' instance of the memory controllers:
-
-
-Counter reset control file:
-
- 'reset_counters'
-
- This write-only control file will zero all the statistical counters
- for UE and CE errors. Zeroing the counters will also reset the timer
- indicating how long since the last counter zero. This is useful
- for computing errors/time. Since the counters are always reset at
- driver initialization time, no module/kernel parameter is available.
-
- RUN TIME: echo "anything" >/sys/devices/system/edac/mc/mc0/counter_reset
-
- This resets the counters on memory controller 0
-
-
-Seconds since last counter reset control file:
-
- 'seconds_since_reset'
-
- This attribute file displays how many seconds have elapsed since the
- last counter reset. This can be used with the error counters to
- measure error rates.
-
-
-
-Memory Controller name attribute file:
-
- 'mc_name'
-
- This attribute file displays the type of memory controller
- that is being utilized.
-
-
-Total memory managed by this memory controller attribute file:
-
- 'size_mb'
-
- This attribute file displays, in count of megabytes, of memory
- that this instance of memory controller manages.
-
-
-Total Uncorrectable Errors count attribute file:
-
- 'ue_count'
-
- This attribute file displays the total count of uncorrectable
- errors that have occurred on this memory controller. If panic_on_ue
- is set this counter will not have a chance to increment,
- since EDAC will panic the system.
-
-
-Total UE count that had no information attribute fileY:
-
- 'ue_noinfo_count'
-
- This attribute file displays the number of UEs that have occurred
- with no information as to which DIMM slot is having errors.
-
-
-Total Correctable Errors count attribute file:
-
- 'ce_count'
-
- This attribute file displays the total count of correctable
- errors that have occurred on this memory controller. This
- count is very important to examine. CEs provide early
- indications that a DIMM is beginning to fail. This count
- field should be monitored for non-zero values and report
- such information to the system administrator.
-
-
-Total Correctable Errors count attribute file:
-
- 'ce_noinfo_count'
-
- This attribute file displays the number of CEs that
- have occurred wherewith no information as to which DIMM slot
- is having errors. Memory is handicapped, but operational,
- yet no information is available to indicate which slot
- the failing memory is in. This count field should be also
- be monitored for non-zero values.
-
-Device Symlink:
-
- 'device'
-
- Symlink to the memory controller device.
-
-Sdram memory scrubbing rate:
-
- 'sdram_scrub_rate'
-
- Read/Write attribute file that controls memory scrubbing. The scrubbing
- rate is set by writing a minimum bandwidth in bytes/sec to the attribute
- file. The rate will be translated to an internal value that gives at
- least the specified rate.
-
- Reading the file will return the actual scrubbing rate employed.
-
- If configuration fails or memory scrubbing is not implemented, accessing
- that attribute will fail.
+this 'X' instance of the memory controllers.
+For a description of the sysfs API, please see:
+ Documentation/ABI/testing/sysfs/devices-edac
============================================================================
'csrowX' DIRECTORIES
+When CONFIG_EDAC_LEGACY_SYSFS is enabled, the sysfs will contain the
+csrowX directories. As this API doesn't work properly for Rambus, FB-DIMMs
+and modern Intel Memory Controllers, this is being deprecated in favor
+of dimmX directories.
+
In the 'csrowX' directories are EDAC control and attribute files for
this 'X' instance of csrow:
diff --git a/Documentation/input/edt-ft5x06.txt b/Documentation/input/edt-ft5x06.txt
new file mode 100644
index 000000000000..2032f0b7a8fa
--- /dev/null
+++ b/Documentation/input/edt-ft5x06.txt
@@ -0,0 +1,54 @@
+EDT ft5x06 based Polytouch devices
+----------------------------------
+
+The edt-ft5x06 driver is useful for the EDT "Polytouch" family of capacitive
+touch screens. Note that it is *not* suitable for other devices based on the
+focaltec ft5x06 devices, since they contain vendor-specific firmware. In
+particular this driver is not suitable for the Nook tablet.
+
+It has been tested with the following devices:
+ * EP0350M06
+ * EP0430M06
+ * EP0570M06
+ * EP0700M06
+
+The driver allows configuration of the touch screen via a set of sysfs files:
+
+/sys/class/input/eventX/device/device/threshold:
+ allows setting the "click"-threshold in the range from 20 to 80.
+
+/sys/class/input/eventX/device/device/gain:
+ allows setting the sensitivity in the range from 0 to 31. Note that
+ lower values indicate higher sensitivity.
+
+/sys/class/input/eventX/device/device/offset:
+ allows setting the edge compensation in the range from 0 to 31.
+
+/sys/class/input/eventX/device/device/report_rate:
+ allows setting the report rate in the range from 3 to 14.
+
+
+For debugging purposes the driver provides a few files in the debug
+filesystem (if available in the kernel). In /sys/kernel/debug/edt_ft5x06
+you'll find the following files:
+
+num_x, num_y:
+ (readonly) contains the number of sensor fields in X- and
+ Y-direction.
+
+mode:
+ allows switching the sensor between "factory mode" and "operation
+ mode" by writing "1" or "0" to it. In factory mode (1) it is
+ possible to get the raw data from the sensor. Note that in factory
+ mode regular events don't get delivered and the options described
+ above are unavailable.
+
+raw_data:
+ contains num_x * num_y big endian 16 bit values describing the raw
+ values for each sensor field. Note that each read() call on this
+ files triggers a new readout. It is recommended to provide a buffer
+ big enough to contain num_x * num_y * 2 bytes.
+
+Note that reading raw_data gives a I/O error when the device is not in factory
+mode. The same happens when reading/writing to the parameter files when the
+device is not in regular operation mode.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c2619ef44a72..ad7e2e5088c1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -526,7 +526,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
coherent_pool=nn[KMG] [ARM,KNL]
Sets the size of memory pool for coherent, atomic dma
- allocations if Contiguous Memory Allocator (CMA) is used.
+ allocations, by default set to 256K.
code_bytes [X86] How many bytes of object code to print
in an oops report.
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt
new file mode 100644
index 000000000000..554290ebab94
--- /dev/null
+++ b/Documentation/pwm.txt
@@ -0,0 +1,76 @@
+Pulse Width Modulation (PWM) interface
+
+This provides an overview about the Linux PWM interface
+
+PWMs are commonly used for controlling LEDs, fans or vibrators in
+cell phones. PWMs with a fixed purpose have no need implementing
+the Linux PWM API (although they could). However, PWMs are often
+found as discrete devices on SoCs which have no fixed purpose. It's
+up to the board designer to connect them to LEDs or fans. To provide
+this kind of flexibility the generic PWM API exists.
+
+Identifying PWMs
+----------------
+
+Users of the legacy PWM API use unique IDs to refer to PWM devices.
+
+Instead of referring to a PWM device via its unique ID, board setup code
+should instead register a static mapping that can be used to match PWM
+consumers to providers, as given in the following example:
+
+ static struct pwm_lookup board_pwm_lookup[] = {
+ PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL),
+ };
+
+ static void __init board_init(void)
+ {
+ ...
+ pwm_add_table(board_pwm_lookup, ARRAY_SIZE(board_pwm_lookup));
+ ...
+ }
+
+Using PWMs
+----------
+
+Legacy users can request a PWM device using pwm_request() and free it
+after usage with pwm_free().
+
+New users should use the pwm_get() function and pass to it the consumer
+device or a consumer name. pwm_put() is used to free the PWM device.
+
+After being requested a PWM has to be configured using:
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
+
+To start/stop toggling the PWM output use pwm_enable()/pwm_disable().
+
+Implementing a PWM driver
+-------------------------
+
+Currently there are two ways to implement pwm drivers. Traditionally
+there only has been the barebone API meaning that each driver has
+to implement the pwm_*() functions itself. This means that it's impossible
+to have multiple PWM drivers in the system. For this reason it's mandatory
+for new drivers to use the generic PWM framework.
+
+A new PWM controller/chip can be added using pwmchip_add() and removed
+again with pwmchip_remove(). pwmchip_add() takes a filled in struct
+pwm_chip as argument which provides a description of the PWM chip, the
+number of PWM devices provider by the chip and the chip-specific
+implementation of the supported PWM operations to the framework.
+
+Locking
+-------
+
+The PWM core list manipulations are protected by a mutex, so pwm_request()
+and pwm_free() may not be called from an atomic context. Currently the
+PWM core does not enforce any locking to pwm_enable(), pwm_disable() and
+pwm_config(), so the calling context is currently driver specific. This
+is an issue derived from the former barebone API and should be fixed soon.
+
+Helpers
+-------
+
+Currently a PWM can only be configured with period_ns and duty_ns. For several
+use cases freq_hz and duty_percent might be better. Instead of calculating
+this in your driver please consider adding appropriate helpers to the framework.
diff --git a/MAINTAINERS b/MAINTAINERS
index c8804c048ac8..b2e3d88ff4cd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5527,6 +5527,18 @@ S: Maintained
F: Documentation/video4linux/README.pvrusb2
F: drivers/media/video/pvrusb2/
+PWM SUBSYSTEM
+M: Thierry Reding <thierry.reding@avionic-design.de>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+W: http://gitorious.org/linux-pwm
+T: git git://gitorious.org/linux-pwm/linux-pwm.git
+F: Documentation/pwm.txt
+F: Documentation/devicetree/bindings/pwm/
+F: include/linux/pwm.h
+F: include/linux/of_pwm.h
+F: drivers/pwm/
+
PXA2xx/PXA3xx SUPPORT
M: Eric Miao <eric.y.miao@gmail.com>
M: Russell King <linux@arm.linux.org.uk>
@@ -5901,6 +5913,16 @@ L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/s3c-fb.c
+SAMSUNG MULTIFUNCTION DEVICE DRIVERS
+M: Sangbeom Kim <sbkim73@samsung.com>
+L: linux-kernel@vger.kernel.org
+S: Supported
+F: drivers/mfd/sec*.c
+F: drivers/regulator/s2m*.c
+F: drivers/regulator/s5m*.c
+F: drivers/rtc/rtc-sec.c
+F: include/linux/mfd/samsung/
+
SERIAL DRIVERS
M: Alan Cox <alan@linux.intel.com>
L: linux-serial@vger.kernel.org
diff --git a/Makefile b/Makefile
index 4bb09e1b1230..8e4c0a7d402b 100644
--- a/Makefile
+++ b/Makefile
@@ -535,11 +535,11 @@ PHONY += include/config/auto.conf
include/config/auto.conf:
$(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
- echo; \
- echo " ERROR: Kernel configuration is invalid."; \
- echo " include/generated/autoconf.h or $@ are missing.";\
- echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
- echo; \
+ echo >&2; \
+ echo >&2 " ERROR: Kernel configuration is invalid."; \
+ echo >&2 " include/generated/autoconf.h or $@ are missing.";\
+ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
+ echo >&2 ; \
/bin/false)
endif # KBUILD_EXTMOD
@@ -796,8 +796,8 @@ prepare3: include/config/kernel.release
ifneq ($(KBUILD_SRC),)
@$(kecho) ' Using $(srctree) as source for kernel'
$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
- echo " $(srctree) is not clean, please run 'make mrproper'"; \
- echo " in the '$(srctree)' directory.";\
+ echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
+ echo >&2 " in the '$(srctree)' directory.";\
/bin/false; \
fi;
endif
@@ -971,11 +971,11 @@ else # CONFIG_MODULES
# ---------------------------------------------------------------------------
modules modules_install: FORCE
- @echo
- @echo "The present kernel configuration has modules disabled."
- @echo "Type 'make config' and enable loadable module support."
- @echo "Then build a kernel with module support enabled."
- @echo
+ @echo >&2
+ @echo >&2 "The present kernel configuration has modules disabled."
+ @echo >&2 "Type 'make config' and enable loadable module support."
+ @echo >&2 "Then build a kernel with module support enabled."
+ @echo >&2
@exit 1
endif # CONFIG_MODULES
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5df11147be84..7980873525b2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1011,7 +1011,6 @@ config ARCH_VT8500
select ARCH_HAS_CPUFREQ
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
- select HAVE_PWM
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 2e1cfa00c25b..9fecf1ae777b 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -130,6 +130,12 @@
clocks = <&eclk>;
};
+ memory-controller@fff00000 {
+ compatible = "calxeda,hb-ddr-ctrl";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 91 4>;
+ };
+
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
@@ -275,6 +281,12 @@
};
};
+ sregs@fff3c200 {
+ compatible = "calxeda,hb-sregs-l2-ecc";
+ reg = <0xfff3c200 0x100>;
+ interrupts = <0 71 4 0 72 4>;
+ };
+
dma@fff3d000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xfff3d000 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
new file mode 100644
index 000000000000..798fa35c0005
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Device Tree Source for the r8a7740 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "renesas,r8a7740";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sh7377.dtsi b/arch/arm/boot/dts/sh7377.dtsi
new file mode 100644
index 000000000000..767ee0796daa
--- /dev/null
+++ b/arch/arm/boot/dts/sh7377.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Device Tree Source for the sh7377 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "renesas,sh7377";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9f1921634eb7..405d1673904e 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -123,6 +123,12 @@
status = "disabled";
};
+ pwm {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
+
i2c@7000c000 {
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index da740191771f..3e4334d14efb 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -117,6 +117,12 @@
status = "disabled";
};
+ pwm {
+ compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
+
i2c@7000c000 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index aa07f5938f05..1143c4d5c567 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -452,6 +452,7 @@ static struct dma_map_ops dmabounce_ops = {
.alloc = arm_dma_alloc,
.free = arm_dma_free,
.mmap = arm_dma_mmap,
+ .get_sgtable = arm_dma_get_sgtable,
.map_page = dmabounce_map_page,
.unmap_page = dmabounce_unmap_page,
.sync_single_for_cpu = dmabounce_sync_for_cpu,
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index ddc9fe6a78ac..7d8718468e0d 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -5,10 +5,7 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SLAB=y
CONFIG_MODULES=y
@@ -21,7 +18,7 @@ CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_R8A7740=y
CONFIG_MACH_ARMADILLO800EVA=y
# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
CONFIG_CPU_BPREDICT_DISABLE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_ERRATA_430973=y
@@ -39,6 +36,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
CONFIG_CMDLINE_FORCE=y
CONFIG_KEXEC=y
+CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y
@@ -89,26 +87,32 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_SH_MOBILE=y
# CONFIG_HWMON is not set
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_RC_CORE is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9T112=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
-CONFIG_SND_SOC=y
CONFIG_SND_SOC_SH4_FSI=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_RENESAS_USBHS=y
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=y
@@ -116,6 +120,8 @@ CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SH_MMCIF=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_DNOTIFY is not set
@@ -124,7 +130,6 @@ CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig
new file mode 100644
index 000000000000..26146ffea1a5
--- /dev/null
+++ b/arch/arm/configs/kzm9d_defconfig
@@ -0,0 +1,89 @@
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_EMEV2=y
+CONFIG_MACH_KZM9D=y
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x10000000
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_SWP_EMULATE is not set
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_LOCAL_TIMERS is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_CMDLINE="console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_EM=y
+# CONFIG_HWMON is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index e3ebc20ed0a7..2388c8610627 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -100,7 +100,12 @@ CONFIG_SND_SOC_SH4_FSI=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_RENESAS_USBHS=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_SDHI=y
@@ -108,12 +113,13 @@ CONFIG_MMC_SH_MMCIF=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_STAGING=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
+CONFIG_INOTIFY_USER=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 4be9c1e80ee6..db2245353f0f 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -106,6 +106,7 @@ CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
CONFIG_SPI_TEGRA=y
CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_TPS6586X=y
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
CONFIG_SENSORS_LM90=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index bbef15d04890..2ae842df4551 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -186,17 +186,6 @@ extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
struct dma_attrs *attrs);
-#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, NULL)
-
-static inline int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr,
- size_t size, struct dma_attrs *attrs)
-{
- struct dma_map_ops *ops = get_dma_ops(dev);
- BUG_ON(!ops);
- return ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
-}
-
static inline void *dma_alloc_writecombine(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
@@ -213,20 +202,12 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
}
-static inline int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
- DEFINE_DMA_ATTRS(attrs);
- dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs);
- return dma_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, &attrs);
-}
-
/*
* This can be called during boot to increase the size of the consistent
* DMA region above it's default value of 2MB. It must be called before the
* memory allocator is initialised, i.e. before any core_initcall.
*/
-extern void __init init_consistent_dma_size(unsigned long size);
+static inline void init_consistent_dma_size(unsigned long size) { }
/*
* For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic"
@@ -280,6 +261,9 @@ extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
enum dma_data_direction);
extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
enum dma_data_direction);
+extern int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size,
+ struct dma_attrs *attrs);
#endif /* __KERNEL__ */
#endif
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index 26fe9de35ecb..2f51293c1875 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -620,10 +620,6 @@ static struct clk exynos4_init_clocks_off[] = {
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 27),
}, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 0),
- }, {
.name = "mfc",
.devname = "s5p-mfc",
.enable = exynos4_clk_ip_mfc_ctrl,
@@ -819,47 +815,21 @@ static struct clk *exynos4_clkset_mout_g2d0_list[] = {
[1] = &exynos4_clk_sclk_apll.clk,
};
-static struct clksrc_sources exynos4_clkset_mout_g2d0 = {
+struct clksrc_sources exynos4_clkset_mout_g2d0 = {
.sources = exynos4_clkset_mout_g2d0_list,
.nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list),
};
-static struct clksrc_clk exynos4_clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &exynos4_clkset_mout_g2d0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
static struct clk *exynos4_clkset_mout_g2d1_list[] = {
[0] = &exynos4_clk_mout_epll.clk,
[1] = &exynos4_clk_sclk_vpll.clk,
};
-static struct clksrc_sources exynos4_clkset_mout_g2d1 = {
+struct clksrc_sources exynos4_clkset_mout_g2d1 = {
.sources = exynos4_clkset_mout_g2d1_list,
.nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list),
};
-static struct clksrc_clk exynos4_clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &exynos4_clkset_mout_g2d1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_g2d_list[] = {
- [0] = &exynos4_clk_mout_g2d0.clk,
- [1] = &exynos4_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_g2d = {
- .sources = exynos4_clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d_list),
-};
-
static struct clk *exynos4_clkset_mout_mfc0_list[] = {
[0] = &exynos4_clk_mout_mpll.clk,
[1] = &exynos4_clk_sclk_apll.clk,
@@ -1126,13 +1096,6 @@ static struct clksrc_clk exynos4_clksrcs[] = {
.reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &exynos4_clkset_mout_g2d,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
- }, {
- .clk = {
.name = "sclk_mfc",
.devname = "s5p-mfc",
},
diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h
index 28a119701182..bd12d5f8b63d 100644
--- a/arch/arm/mach-exynos/clock-exynos4.h
+++ b/arch/arm/mach-exynos/clock-exynos4.h
@@ -23,6 +23,9 @@ extern struct clksrc_sources exynos4_clkset_group;
extern struct clk *exynos4_clkset_aclk_top_list[];
extern struct clk *exynos4_clkset_group_list[];
+extern struct clksrc_sources exynos4_clkset_mout_g2d0;
+extern struct clksrc_sources exynos4_clkset_mout_g2d1;
+
extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index b8689ff60baf..fed4c26e9dad 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -48,6 +48,32 @@ static struct clksrc_clk *sysclks[] = {
/* nothing here yet */
};
+static struct clksrc_clk exynos4210_clk_mout_g2d0 = {
+ .clk = {
+ .name = "mout_g2d0",
+ },
+ .sources = &exynos4_clkset_mout_g2d0,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk exynos4210_clk_mout_g2d1 = {
+ .clk = {
+ .name = "mout_g2d1",
+ },
+ .sources = &exynos4_clkset_mout_g2d1,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos4210_clkset_mout_g2d_list[] = {
+ [0] = &exynos4210_clk_mout_g2d0.clk,
+ [1] = &exynos4210_clk_mout_g2d1.clk,
+};
+
+static struct clksrc_sources exynos4210_clkset_mout_g2d = {
+ .sources = exynos4210_clkset_mout_g2d_list,
+ .nr_sources = ARRAY_SIZE(exynos4210_clkset_mout_g2d_list),
+};
+
static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
@@ -74,6 +100,13 @@ static struct clksrc_clk clksrcs[] = {
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
.reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimg2d",
+ },
+ .sources = &exynos4210_clkset_mout_g2d,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
},
};
@@ -105,6 +138,10 @@ static struct clk init_clocks_off[] = {
.devname = SYSMMU_CLOCK_DEVNAME(fimd1, 11),
.enable = exynos4_clk_ip_lcd1_ctrl,
.ctrlbit = (1 << 4),
+ }, {
+ .name = "fimg2d",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 0),
},
};
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index da397d21bbcf..8fba0b5fb8ab 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -68,12 +68,45 @@ static struct clksrc_clk clk_mout_mpll_user = {
.reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
};
+static struct clksrc_clk exynos4x12_clk_mout_g2d0 = {
+ .clk = {
+ .name = "mout_g2d0",
+ },
+ .sources = &exynos4_clkset_mout_g2d0,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 },
+};
+
+static struct clksrc_clk exynos4x12_clk_mout_g2d1 = {
+ .clk = {
+ .name = "mout_g2d1",
+ },
+ .sources = &exynos4_clkset_mout_g2d1,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 },
+};
+
+static struct clk *exynos4x12_clkset_mout_g2d_list[] = {
+ [0] = &exynos4x12_clk_mout_g2d0.clk,
+ [1] = &exynos4x12_clk_mout_g2d1.clk,
+};
+
+static struct clksrc_sources exynos4x12_clkset_mout_g2d = {
+ .sources = exynos4x12_clkset_mout_g2d_list,
+ .nr_sources = ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list),
+};
+
static struct clksrc_clk *sysclks[] = {
&clk_mout_mpll_user,
};
static struct clksrc_clk clksrcs[] = {
- /* nothing here yet */
+ {
+ .clk = {
+ .name = "sclk_fimg2d",
+ },
+ .sources = &exynos4x12_clkset_mout_g2d,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 },
+ },
};
static struct clk init_clocks_off[] = {
@@ -102,7 +135,11 @@ static struct clk init_clocks_off[] = {
.devname = "exynos-fimc-lite.1",
.enable = exynos4212_clk_ip_isp0_ctrl,
.ctrlbit = (1 << 3),
- }
+ }, {
+ .name = "fimg2d",
+ .enable = exynos4_clk_ip_dmc_ctrl,
+ .ctrlbit = (1 << 23),
+ },
};
#ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index f98a83a81ce7..ea785fcaf6c3 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1066,12 +1066,8 @@ static struct platform_device nuri_max8903_device = {
static void __init nuri_power_init(void)
{
int gpio;
- int irq_base = IRQ_GPIO_END + 1;
int ta_en = 0;
- nuri_max8997_pdata.irq_base = irq_base;
- irq_base += MAX8997_IRQ_NR;
-
gpio = EXYNOS4_GPX0(7);
gpio_request(gpio, "AP_PMIC_IRQ");
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5a12dc26f496..5ca80307d6d7 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -426,7 +426,6 @@ static struct max8997_platform_data __initdata origen_max8997_pdata = {
.buck1_gpiodvs = false,
.buck2_gpiodvs = false,
.buck5_gpiodvs = false,
- .irq_base = IRQ_GPIO_END + 1,
.ignore_gpiodvs_side_effect = true,
.buck125_default_idx = 0x0,
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
deleted file mode 100644
index b96949dd5adb..000000000000
--- a/arch/arm/mach-pxa/eseries.h
+++ /dev/null
@@ -1,14 +0,0 @@
-void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi);
-
-extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
-extern struct pxaficp_platform_data e7xx_ficp_platform_data;
-extern int e7xx_irda_init(void);
-
-extern int eseries_tmio_enable(struct platform_device *dev);
-extern int eseries_tmio_disable(struct platform_device *dev);
-extern int eseries_tmio_suspend(struct platform_device *dev);
-extern int eseries_tmio_resume(struct platform_device *dev);
-extern void eseries_get_tmio_gpios(void);
-extern struct resource eseries_tmio_resources[];
-extern struct platform_device e300_tc6387xb_device;
-
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index d3de84b0dcbe..e6311988add2 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -296,27 +296,11 @@ static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
static struct resource asic3_resources[] = {
/* GPIO part */
- [0] = {
- .start = ASIC3_PHYS,
- .end = ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT),
+ [1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)),
/* SD part */
- [2] = {
- .start = ASIC3_SD_PHYS,
- .end = ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
- .flags = IORESOURCE_MEM,
- },
- [3] = {
- .start = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
- .flags = IORESOURCE_IRQ,
- },
+ [2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT),
+ [3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)),
};
static struct asic3_platform_data asic3_platform_data = {
@@ -343,11 +327,7 @@ static struct platform_device asic3 = {
*/
static struct resource egpio_resources[] = {
- [0] = {
- .start = PXA_CS5_PHYS,
- .end = PXA_CS5_PHYS + 0x4 - 1,
- .flags = IORESOURCE_MEM,
- },
+ [0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4),
};
static struct htc_egpio_chip egpio_chips[] = {
@@ -537,11 +517,7 @@ static struct w100fb_mach_info w3220_info = {
};
static struct resource w3220_resources[] = {
- [0] = {
- .start = ATI_W3220_PHYS,
- .end = ATI_W3220_PHYS + 0x00ffffff,
- .flags = IORESOURCE_MEM,
- },
+ [0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M),
};
static struct platform_device w3220 = {
@@ -683,20 +659,12 @@ static struct pda_power_pdata power_supply_info = {
};
static struct resource power_supply_resources[] = {
- [0] = {
- .name = "ac",
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
- IORESOURCE_IRQ_LOWEDGE,
- .start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
- .end = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
- },
- [1] = {
- .name = "usb",
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
- IORESOURCE_IRQ_LOWEDGE,
- .start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
- .end = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
- },
+ [0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac",
+ IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
+ [1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb",
+ IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
};
static struct platform_device power_supply = {
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index fcf3dcabb694..c0537f40a3d8 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -12,6 +12,9 @@
* published by the Free Software Foundation.
*/
+#ifndef __MACH_S3C64XX_PM_CORE_H
+#define __MACH_S3C64XX_PM_CORE_H __FILE__
+
#include <mach/regs-gpio.h>
static inline void s3c_pm_debug_init_uart(void)
@@ -113,3 +116,4 @@ static inline void samsung_pm_saved_gpios(void)
__raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
}
+#endif /* __MACH_S3C64XX_PM_CORE_H */
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index df33909205e2..4cacc2d22fbe 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -19,6 +19,7 @@ config ARCH_SH7372
select CPU_V7
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_CPU_SUSPEND if PM || CPU_IDLE
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
@@ -58,6 +59,7 @@ config MACH_G4EVM
bool "G4EVM board"
depends on ARCH_SH7377
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_AP4EVB
bool "AP4EVB board"
@@ -65,6 +67,7 @@ config MACH_AP4EVB
select ARCH_REQUIRE_GPIOLIB
select SH_LCD_MIPI_DSI
select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
choice
prompt "AP4EVB LCD panel selection"
@@ -83,6 +86,7 @@ config MACH_AG5EVM
bool "AG5EVM board"
select ARCH_REQUIRE_GPIOLIB
select SH_LCD_MIPI_DSI
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on ARCH_SH73A0
config MACH_MACKEREL
@@ -90,15 +94,18 @@ config MACH_MACKEREL
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_KOTA2
bool "KOTA2 board"
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on ARCH_SH73A0
config MACH_BONITO
bool "bonito board"
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on ARCH_R8A7740
config MACH_ARMADILLO800EVA
@@ -106,22 +113,28 @@ config MACH_ARMADILLO800EVA
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
select USE_OF
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SND_SOC_WM8978 if SND_SIMPLE_CARD
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
select USE_OF
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select USE_OF
+ select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
comment "SH-Mobile System Configuration"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 8aa1962c22a2..0df5ae6740c6 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -39,7 +39,9 @@ obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_ARCH_SHMOBILE) += pm-rmobile.o
obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o
+obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o
# Board objects
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 5a6f22f05e99..d82c010fdfc6 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -27,6 +27,8 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/serial_sci.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
@@ -52,6 +54,12 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/traps.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct resource smsc9220_resources[] = {
[0] = {
.start = 0x14000000,
@@ -142,6 +150,13 @@ static struct platform_device fsi_device = {
.resource = fsi_resources,
};
+/* Fixed 1.8V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
static struct resource sh_mmcif_resources[] = {
[0] = {
.name = "MMCIF",
@@ -364,6 +379,13 @@ static struct platform_device mipidsi0_device = {
},
};
+/* Fixed 2.8V regulators to be used by SDHI0 */
+static struct regulator_consumer_supply fixed2v8_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
@@ -408,8 +430,57 @@ static struct platform_device sdhi0_device = {
},
};
-void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
+/* Fixed 3.3V regulator to be used by SDHI1 */
+static struct regulator_consumer_supply cn4_power_consumers[] =
{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct regulator_init_data cn4_power_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cn4_power_consumers),
+ .consumer_supplies = cn4_power_consumers,
+};
+
+static struct fixed_voltage_config cn4_power_info = {
+ .supply_name = "CN4 SD/MMC Vdd",
+ .microvolts = 3300000,
+ .gpio = GPIO_PORT114,
+ .enable_high = 1,
+ .init_data = &cn4_power_init_data,
+};
+
+static struct platform_device cn4_power = {
+ .name = "reg-fixed-voltage",
+ .id = 2,
+ .dev = {
+ .platform_data = &cn4_power_info,
+ },
+};
+
+static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
+{
+ static int power_gpio = -EINVAL;
+
+ if (power_gpio < 0) {
+ int ret = gpio_request(GPIO_PORT114, "sdhi1_power");
+ if (!ret) {
+ power_gpio = GPIO_PORT114;
+ gpio_direction_output(power_gpio, 0);
+ }
+ }
+
+ /*
+ * If requesting the GPIO above failed, it means, that the regulator got
+ * probed and grabbed the GPIO, but we don't know, whether the sdhi
+ * driver already uses the regulator. If it doesn't, we have to toggle
+ * the GPIO ourselves, even though it is now owned by the fixed
+ * regulator driver. We have to live with the race in case the driver
+ * gets unloaded and the GPIO freed between these two steps.
+ */
gpio_set_value(GPIO_PORT114, state);
}
@@ -455,6 +526,7 @@ static struct platform_device sdhi1_device = {
};
static struct platform_device *ag5evm_devices[] __initdata = {
+ &cn4_power,
&eth_device,
&keysc_device,
&fsi_device,
@@ -468,6 +540,12 @@ static struct platform_device *ag5evm_devices[] __initdata = {
static void __init ag5evm_init(void)
{
+ regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+ ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+ regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
+ ARRAY_SIZE(fixed2v8_power_consumers), 3300000);
+ regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
sh73a0_pinmux_init();
/* enable SCIFA2 */
@@ -562,8 +640,6 @@ static void __init ag5evm_init(void)
gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
- gpio_request(GPIO_PORT114, "sdhi1_power");
- gpio_direction_output(GPIO_PORT114, 0);
#ifdef CONFIG_CACHE_L2X0
/* Shared attribute override enable, 64K*8way */
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index ace60246a5df..f172ca85905c 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -34,6 +34,8 @@
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/sh_clk.h>
@@ -159,6 +161,27 @@
* CN12: 3.3v
*/
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+ /* J22 default position: 1.8V */
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
/* MTD */
static struct mtd_partition nor_flash_partitions[] = {
{
@@ -1138,21 +1161,6 @@ static void __init fsi_init_pm_clock(void)
clk_put(fsia_ick);
}
-/*
- * FIXME !!
- *
- * gpio_no_direction
- * are quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_no_direction(u32 addr)
-{
- __raw_writeb(0x00, addr);
-}
-
/* TouchScreen */
#ifdef CONFIG_AP4EVB_QHD
# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123
@@ -1224,6 +1232,12 @@ static void __init ap4evb_init(void)
u32 srcr4;
struct clk *clk;
+ regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+ ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+ regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
@@ -1302,8 +1316,8 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
- gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
- gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+ gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
+ gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
/* card detect pin for MMC slot (CN7) */
gpio_request(GPIO_PORT41, NULL);
@@ -1447,14 +1461,14 @@ static void __init ap4evb_init(void)
platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
- sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc1_device);
- sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
- sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device);
hdmi_init_pm_clock();
fsi_init_pm_clock();
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 9bd135531d76..cf10f92856dc 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -28,6 +28,8 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
#include <linux/videodev2.h>
#include <linux/usb/renesas_usbhs.h>
@@ -37,14 +39,20 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <mach/common.h>
#include <mach/irqs.h>
+#include <mach/r8a7740.h>
+#include <media/mt9t112.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
#include <asm/page.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/r8a7740.h>
#include <video/sh_mobile_lcdc.h>
+#include <video/sh_mobile_hdmi.h>
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
/*
* CON1 Camera Module
@@ -108,6 +116,14 @@
*/
/*
+ * FSI-WM8978
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "Headphone" 50
+ */
+
+/*
* USB function
*
* When you use USB Function,
@@ -117,14 +133,8 @@
* These are a little bit complex.
* see
* usbhsf_power_ctrl()
- *
- * CAUTION
- *
- * It uses autonomy mode for USB hotplug at this point
- * (= usbhs_private.platform_callback.get_vbus is NULL),
- * since we don't know what's happen on PM control
- * on this workaround.
*/
+#define IRQ7 evt2irq(0x02e0)
#define USBCR1 0xe605810a
#define USBH 0xC6700000
#define USBH_USBCTR 0x10834
@@ -204,6 +214,20 @@ static void usbhsf_power_ctrl(struct platform_device *pdev,
}
}
+static int usbhsf_get_vbus(struct platform_device *pdev)
+{
+ return gpio_get_value(GPIO_PORT209);
+}
+
+static irqreturn_t usbhsf_interrupt(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+
+ renesas_usbhs_call_notify_hotplug(pdev);
+
+ return IRQ_HANDLED;
+}
+
static void usbhsf_hardware_exit(struct platform_device *pdev)
{
struct usbhsf_private *priv = usbhsf_get_priv(pdev);
@@ -227,11 +251,14 @@ static void usbhsf_hardware_exit(struct platform_device *pdev)
priv->host = NULL;
priv->func = NULL;
priv->usbh_base = NULL;
+
+ free_irq(IRQ7, pdev);
}
static int usbhsf_hardware_init(struct platform_device *pdev)
{
struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+ int ret;
priv->phy = clk_get(&pdev->dev, "phy");
priv->usb24 = clk_get(&pdev->dev, "usb24");
@@ -251,6 +278,14 @@ static int usbhsf_hardware_init(struct platform_device *pdev)
return -EIO;
}
+ ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE,
+ dev_name(&pdev->dev), pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "request_irq err\n");
+ return ret;
+ }
+ irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH);
+
/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
clk_set_rate(priv->usb24,
clk_get_rate(clk_get_parent(priv->usb24)));
@@ -262,6 +297,7 @@ static struct usbhsf_private usbhsf_private = {
.info = {
.platform_callback = {
.get_id = usbhsf_get_id,
+ .get_vbus = usbhsf_get_vbus,
.hardware_init = usbhsf_hardware_init,
.hardware_exit = usbhsf_hardware_exit,
.power_ctrl = usbhsf_power_ctrl,
@@ -269,6 +305,8 @@ static struct usbhsf_private usbhsf_private = {
.driver_param = {
.buswait_bwait = 5,
.detection_delay = 5,
+ .d0_rx_id = SHDMA_SLAVE_USBHS_RX,
+ .d1_tx_id = SHDMA_SLAVE_USBHS_TX,
},
}
};
@@ -384,6 +422,103 @@ static struct platform_device lcdc0_device = {
},
};
+/*
+ * LCDC1/HDMI
+ */
+static struct sh_mobile_hdmi_info hdmi_info = {
+ .flags = HDMI_OUTPUT_PUSH_PULL |
+ HDMI_OUTPUT_POLARITY_HI |
+ HDMI_32BIT_REG |
+ HDMI_HAS_HTOP1 |
+ HDMI_SND_SRC_SPDIF,
+};
+
+static struct resource hdmi_resources[] = {
+ [0] = {
+ .name = "HDMI",
+ .start = 0xe6be0000,
+ .end = 0xe6be03ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1700),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "HDMI emma3pf",
+ .start = 0xe6be4000,
+ .end = 0xe6be43ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device hdmi_device = {
+ .name = "sh-mobile-hdmi",
+ .num_resources = ARRAY_SIZE(hdmi_resources),
+ .resource = hdmi_resources,
+ .id = -1,
+ .dev = {
+ .platform_data = &hdmi_info,
+ },
+};
+
+static const struct fb_videomode lcdc1_mode = {
+ .name = "HDMI 720p",
+ .xres = 1280,
+ .yres = 720,
+ .pixclock = 13468,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .refresh = 60,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+};
+
+static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
+ .clock_source = LCDC_CLK_PERIPHERAL, /* HDMI clock */
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .interface_type = RGB24,
+ .clock_divider = 1,
+ .flags = LCDC_FLAGS_DWPOL,
+ .lcd_modes = &lcdc1_mode,
+ .num_modes = 1,
+ .tx_dev = &hdmi_device,
+ .panel_cfg = {
+ .width = 1280,
+ .height = 720,
+ },
+ },
+};
+
+static struct resource hdmi_lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC1",
+ .start = 0xfe944000,
+ .end = 0xfe948000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x1780),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device hdmi_lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(hdmi_lcdc_resources),
+ .resource = hdmi_lcdc_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &hdmi_lcdc_info,
+ .coherent_dma_mask = ~0,
+ },
+};
+
/* GPIO KEY */
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
@@ -407,6 +542,17 @@ static struct platform_device gpio_keys_device = {
},
};
+/* Fixed 3.3V regulator to be used by SDHI0, SDHI1, MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
+};
+
/* SDHI0 */
/*
* FIXME
@@ -418,6 +564,8 @@ static struct platform_device gpio_keys_device = {
*/
#define IRQ31 evt2irq(0x33E0)
static struct sh_mobile_sdhi_info sdhi0_info = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\
MMC_CAP_NEEDS_POLL,
.tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -458,6 +606,8 @@ static struct platform_device sdhi0_device = {
/* SDHI1 */
static struct sh_mobile_sdhi_info sdhi1_info = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
@@ -532,12 +682,209 @@ static struct platform_device sh_mmcif_device = {
.resource = sh_mmcif_resources,
};
+/* Camera */
+static int mt9t111_power(struct device *dev, int mode)
+{
+ struct clk *mclk = clk_get(NULL, "video1");
+
+ if (IS_ERR(mclk)) {
+ dev_err(dev, "can't get video1 clock\n");
+ return -EINVAL;
+ }
+
+ if (mode) {
+ /* video1 (= CON1 camera) expect 24MHz */
+ clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
+ clk_enable(mclk);
+ gpio_direction_output(GPIO_PORT158, 1);
+ } else {
+ gpio_direction_output(GPIO_PORT158, 0);
+ clk_disable(mclk);
+ }
+
+ clk_put(mclk);
+
+ return 0;
+}
+
+static struct i2c_board_info i2c_camera_mt9t111 = {
+ I2C_BOARD_INFO("mt9t112", 0x3d),
+};
+
+static struct mt9t112_camera_info mt9t111_info = {
+ .divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 },
+};
+
+static struct soc_camera_link mt9t111_link = {
+ .i2c_adapter_id = 0,
+ .bus_id = 0,
+ .board_info = &i2c_camera_mt9t111,
+ .power = mt9t111_power,
+ .priv = &mt9t111_info,
+};
+
+static struct platform_device camera_device = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &mt9t111_link,
+ },
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+ .flags = SH_CEU_FLAG_LOWER_8BIT,
+};
+
+static struct resource ceu0_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x0500),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu0_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ceu0_resources),
+ .resource = ceu0_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu0_info,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+/* FSI */
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
+{
+ struct clk *fsib;
+ int ret;
+
+ /* it support 48KHz only */
+ if (48000 != rate)
+ return -EINVAL;
+
+ fsib = clk_get(dev, "ickb");
+ if (IS_ERR(fsib))
+ return -EINVAL;
+
+ if (enable) {
+ ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ clk_enable(fsib);
+ } else {
+ ret = 0;
+ clk_disable(fsib);
+ }
+
+ clk_put(fsib);
+
+ return ret;
+}
+
+static struct sh_fsi_platform_info fsi_info = {
+ /* FSI-WM8978 */
+ .port_a = {
+ .tx_id = SHDMA_SLAVE_FSIA_TX,
+ },
+ /* FSI-HDMI */
+ .port_b = {
+ .flags = SH_FSI_FMT_SPDIF |
+ SH_FSI_ENABLE_STREAM_MODE,
+ .set_rate = fsi_hdmi_set_rate,
+ .tx_id = SHDMA_SLAVE_FSIB_TX,
+ }
+};
+
+static struct resource fsi_resources[] = {
+ [0] = {
+ .name = "FSI",
+ .start = 0xfe1f0000,
+ .end = 0xfe1f8400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1840),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device fsi_device = {
+ .name = "sh_fsi2",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(fsi_resources),
+ .resource = fsi_resources,
+ .dev = {
+ .platform_data = &fsi_info,
+ },
+};
+
+/* FSI-WM8978 */
+static struct asoc_simple_dai_init_info fsi_wm8978_init_info = {
+ .fmt = SND_SOC_DAIFMT_I2S,
+ .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF,
+ .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS,
+ .sysclk = 12288000,
+};
+
+static struct asoc_simple_card_info fsi_wm8978_info = {
+ .name = "wm8978",
+ .card = "FSI2A-WM8978",
+ .cpu_dai = "fsia-dai",
+ .codec = "wm8978.0-001a",
+ .platform = "sh_fsi2",
+ .codec_dai = "wm8978-hifi",
+ .init = &fsi_wm8978_init_info,
+};
+
+static struct platform_device fsi_wm8978_device = {
+ .name = "asoc-simple-card",
+ .id = 0,
+ .dev = {
+ .platform_data = &fsi_wm8978_info,
+ },
+};
+
+/* FSI-HDMI */
+static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = {
+ .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM,
+};
+
+static struct asoc_simple_card_info fsi2_hdmi_info = {
+ .name = "HDMI",
+ .card = "FSI2B-HDMI",
+ .cpu_dai = "fsib-dai",
+ .codec = "sh-mobile-hdmi",
+ .platform = "sh_fsi2",
+ .codec_dai = "sh_mobile_hdmi-hifi",
+ .init = &fsi2_hdmi_init_info,
+};
+
+static struct platform_device fsi_hdmi_device = {
+ .name = "asoc-simple-card",
+ .id = 1,
+ .dev = {
+ .platform_data = &fsi2_hdmi_info,
+ },
+};
+
/* I2C */
static struct i2c_board_info i2c0_devices[] = {
{
I2C_BOARD_INFO("st1232-ts", 0x55),
.irq = evt2irq(0x0340),
},
+ {
+ I2C_BOARD_INFO("wm8978", 0x1a),
+ },
};
/*
@@ -549,6 +896,13 @@ static struct platform_device *eva_devices[] __initdata = {
&sh_eth_device,
&sdhi0_device,
&sh_mmcif_device,
+ &hdmi_device,
+ &hdmi_lcdc_device,
+ &camera_device,
+ &ceu0_device,
+ &fsi_device,
+ &fsi_hdmi_device,
+ &fsi_wm8978_device,
};
static void __init eva_clock_init(void)
@@ -556,10 +910,14 @@ static void __init eva_clock_init(void)
struct clk *system = clk_get(NULL, "system_clk");
struct clk *xtal1 = clk_get(NULL, "extal1");
struct clk *usb24s = clk_get(NULL, "usb24s");
+ struct clk *fsibck = clk_get(NULL, "fsibck");
+ struct clk *fsib = clk_get(&fsi_device.dev, "ickb");
if (IS_ERR(system) ||
IS_ERR(xtal1) ||
- IS_ERR(usb24s)) {
+ IS_ERR(usb24s) ||
+ IS_ERR(fsibck) ||
+ IS_ERR(fsib)) {
pr_err("armadillo800eva board clock init failed\n");
goto clock_error;
}
@@ -570,6 +928,11 @@ static void __init eva_clock_init(void)
/* usb24s use extal1 (= system) clock (= 24MHz) */
clk_set_parent(usb24s, system);
+ /* FSIBCK is 12.288MHz, and it is parent of FSI-B */
+ clk_set_parent(fsib, fsibck);
+ clk_set_rate(fsibck, 12288000);
+ clk_set_rate(fsib, 12288000);
+
clock_error:
if (!IS_ERR(system))
clk_put(system);
@@ -577,16 +940,26 @@ clock_error:
clk_put(xtal1);
if (!IS_ERR(usb24s))
clk_put(usb24s);
+ if (!IS_ERR(fsibck))
+ clk_put(fsibck);
+ if (!IS_ERR(fsib))
+ clk_put(fsib);
}
/*
* board init
*/
+#define GPIO_PORT7CR 0xe6050007
+#define GPIO_PORT8CR 0xe6050008
static void __init eva_init(void)
{
- eva_clock_init();
+ struct platform_device *usb = NULL;
+
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
r8a7740_pinmux_init();
+ r8a7740_meram_workaround();
/* SCIFA1 */
gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
@@ -667,8 +1040,19 @@ static void __init eva_init(void)
/* USB Host */
} else {
/* USB Func */
- gpio_request(GPIO_FN_VBUS, NULL);
+ /*
+ * A1 chip has 2 IRQ7 pin and it was controled by MSEL register.
+ * OTOH, usbhs interrupt needs its value (HI/LOW) to decide
+ * USB connection/disconnection (usbhsf_get_vbus()).
+ * This means we needs to select GPIO_FN_IRQ7_PORT209 first,
+ * and select GPIO_PORT209 here
+ */
+ gpio_request(GPIO_FN_IRQ7_PORT209, NULL);
+ gpio_request(GPIO_PORT209, NULL);
+ gpio_direction_input(GPIO_PORT209);
+
platform_device_register(&usbhsf_device);
+ usb = &usbhsf_device;
}
/* SDHI0 */
@@ -706,6 +1090,48 @@ static void __init eva_init(void)
gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL);
gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL);
+ /* CEU0 */
+ gpio_request(GPIO_FN_VIO0_D7, NULL);
+ gpio_request(GPIO_FN_VIO0_D6, NULL);
+ gpio_request(GPIO_FN_VIO0_D5, NULL);
+ gpio_request(GPIO_FN_VIO0_D4, NULL);
+ gpio_request(GPIO_FN_VIO0_D3, NULL);
+ gpio_request(GPIO_FN_VIO0_D2, NULL);
+ gpio_request(GPIO_FN_VIO0_D1, NULL);
+ gpio_request(GPIO_FN_VIO0_D0, NULL);
+ gpio_request(GPIO_FN_VIO0_CLK, NULL);
+ gpio_request(GPIO_FN_VIO0_HD, NULL);
+ gpio_request(GPIO_FN_VIO0_VD, NULL);
+ gpio_request(GPIO_FN_VIO0_FIELD, NULL);
+ gpio_request(GPIO_FN_VIO_CKO, NULL);
+
+ /* CON1/CON15 Camera */
+ gpio_request(GPIO_PORT173, NULL); /* STANDBY */
+ gpio_request(GPIO_PORT172, NULL); /* RST */
+ gpio_request(GPIO_PORT158, NULL); /* CAM_PON */
+ gpio_direction_output(GPIO_PORT173, 0);
+ gpio_direction_output(GPIO_PORT172, 1);
+ gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */
+
+ /* FSI-WM8978 */
+ gpio_request(GPIO_FN_FSIAIBT, NULL);
+ gpio_request(GPIO_FN_FSIAILR, NULL);
+ gpio_request(GPIO_FN_FSIAOMC, NULL);
+ gpio_request(GPIO_FN_FSIAOSLD, NULL);
+ gpio_request(GPIO_FN_FSIAISLD_PORT5, NULL);
+
+ gpio_request(GPIO_PORT7, NULL);
+ gpio_request(GPIO_PORT8, NULL);
+ gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
+ gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
+
+ /* FSI-HDMI */
+ gpio_request(GPIO_FN_FSIBCK, NULL);
+
+ /* HDMI */
+ gpio_request(GPIO_FN_HDMI_HPD, NULL);
+ gpio_request(GPIO_FN_HDMI_CEC, NULL);
+
/*
* CAUTION
*
@@ -752,6 +1178,13 @@ static void __init eva_init(void)
platform_add_devices(eva_devices,
ARRAY_SIZE(eva_devices));
+
+ eva_clock_init();
+
+ rmobile_add_device_to_domain(&r8a7740_pd_a4lc, &lcdc0_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a4lc, &hdmi_lcdc_device);
+ if (usb)
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, usb);
}
static void __init eva_earlytimer_init(void)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index e9b32cfbf741..4129008eae29 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -26,6 +26,8 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/videodev2.h>
#include <mach/common.h>
@@ -75,6 +77,12 @@
* S38.2 = OFF
*/
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
/*
* FPGA
*/
@@ -360,6 +368,8 @@ static void __init bonito_init(void)
{
u16 val;
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
r8a7740_pinmux_init();
bonito_fpga_init();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index f1257321999a..fa5dfc5c8ed6 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -26,6 +26,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h>
#include <linux/io.h>
#include <linux/input.h>
@@ -196,6 +198,15 @@ static struct platform_device keysc_device = {
},
};
+/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
/* SDHI */
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_caps = MMC_CAP_SDIO_IRQ,
@@ -271,26 +282,11 @@ static struct platform_device *g4evm_devices[] __initdata = {
#define GPIO_SDHID1_D3 0xe6052106
#define GPIO_SDHICMD1 0xe6052107
-/*
- * FIXME !!
- *
- * gpio_pull_up is quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_pull_up(u32 addr)
-{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xC0;
- __raw_writeb(data, addr);
-}
-
static void __init g4evm_init(void)
{
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
sh7377_pinmux_init();
/* Lit DS14 LED */
@@ -351,11 +347,11 @@ static void __init g4evm_init(void)
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
- gpio_pull_up(GPIO_SDHID0_D0);
- gpio_pull_up(GPIO_SDHID0_D1);
- gpio_pull_up(GPIO_SDHID0_D2);
- gpio_pull_up(GPIO_SDHID0_D3);
- gpio_pull_up(GPIO_SDHICMD0);
+ gpio_request_pullup(GPIO_SDHID0_D0);
+ gpio_request_pullup(GPIO_SDHID0_D1);
+ gpio_request_pullup(GPIO_SDHID0_D2);
+ gpio_request_pullup(GPIO_SDHID0_D3);
+ gpio_request_pullup(GPIO_SDHICMD0);
/* SDHI1 */
gpio_request(GPIO_FN_SDHICLK1, NULL);
@@ -364,11 +360,11 @@ static void __init g4evm_init(void)
gpio_request(GPIO_FN_SDHID1_2, NULL);
gpio_request(GPIO_FN_SDHID1_3, NULL);
gpio_request(GPIO_FN_SDHICMD1, NULL);
- gpio_pull_up(GPIO_SDHID1_D0);
- gpio_pull_up(GPIO_SDHID1_D1);
- gpio_pull_up(GPIO_SDHID1_D2);
- gpio_pull_up(GPIO_SDHID1_D3);
- gpio_pull_up(GPIO_SDHICMD1);
+ gpio_request_pullup(GPIO_SDHID1_D0);
+ gpio_request_pullup(GPIO_SDHID1_D1);
+ gpio_request_pullup(GPIO_SDHID1_D2);
+ gpio_request_pullup(GPIO_SDHID1_D3);
+ gpio_request_pullup(GPIO_SDHICMD1);
sh7377_add_standard_devices();
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index f60f1b281cc4..21dbe54304d5 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -27,6 +27,8 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/input.h>
@@ -49,6 +51,12 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/traps.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
/* SMSC 9220 */
static struct resource smsc9220_resources[] = {
[0] = {
@@ -288,6 +296,13 @@ static struct platform_device leds_tpu30_device = {
.resource = tpu30_resources,
};
+/* Fixed 1.8V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
/* MMCIF */
static struct resource mmcif_resources[] = {
[0] = {
@@ -321,6 +336,15 @@ static struct platform_device mmcif_device = {
.resource = mmcif_resources,
};
+/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
@@ -411,6 +435,12 @@ static struct platform_device *kota2_devices[] __initdata = {
static void __init kota2_init(void)
{
+ regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+ ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+ regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
sh73a0_pinmux_init();
/* SCIFA2 (UART2) */
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 6a33cf393428..2c986eaae7b4 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -21,6 +21,8 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <mach/common.h>
#include <mach/emev2.h>
@@ -28,6 +30,12 @@
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
/* Ether */
static struct resource smsc911x_resources[] = {
[0] = {
@@ -63,6 +71,8 @@ static struct platform_device *kzm9d_devices[] __initdata = {
void __init kzm9d_add_standard_devices(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
emev2_add_standard_devices();
platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices));
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index c0ae815e7beb..53b7ea92c32c 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -30,9 +30,14 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
#include <linux/videodev2.h>
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
#include <mach/irqs.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
@@ -54,6 +59,20 @@
#define GPIO_PCF8575_PORT15 (GPIO_NR + 13)
#define GPIO_PCF8575_PORT16 (GPIO_NR + 14)
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+/*
+ * FSI-AK4648
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "LINEOUT Mixer DACL" on
+ */
+
/* SMSC 9221 */
static struct resource smsc9221_resources[] = {
[0] = {
@@ -112,6 +131,151 @@ static struct platform_device usb_host_device = {
.resource = usb_resources,
};
+/* USB Func CN17 */
+struct usbhs_private {
+ unsigned int phy;
+ unsigned int cr2;
+ struct renesas_usbhs_platform_info info;
+};
+
+#define IRQ15 intcs_evt2irq(0x03e0)
+#define USB_PHY_MODE (1 << 4)
+#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
+#define USB_PHY_ON (1 << 1)
+#define USB_PHY_OFF (1 << 0)
+#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
+
+#define usbhs_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ return !((1 << 7) & __raw_readw(priv->cr2));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ /* init phy */
+ __raw_writew(0x8a0a, priv->cr2);
+}
+
+static int usbhs_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static irqreturn_t usbhs_interrupt(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ renesas_usbhs_call_notify_hotplug(pdev);
+
+ /* clear status */
+ __raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);
+
+ return IRQ_HANDLED;
+}
+
+static int usbhs_hardware_init(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+ int ret;
+
+ /* clear interrupt status */
+ __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
+
+ ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
+ dev_name(&pdev->dev), pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "request_irq err\n");
+ return ret;
+ }
+
+ /* enable USB phy interrupt */
+ __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);
+
+ return 0;
+}
+
+static void usbhs_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ /* clear interrupt status */
+ __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
+
+ free_irq(IRQ15, pdev);
+}
+
+static u32 usbhs_pipe_cfg[] = {
+ USB_ENDPOINT_XFER_CONTROL,
+ USB_ENDPOINT_XFER_ISOC,
+ USB_ENDPOINT_XFER_ISOC,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_INT,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+ USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usbhs_private usbhs_private = {
+ .phy = 0xe60781e0, /* USBPHYINT */
+ .cr2 = 0xe605810c, /* USBCR2 */
+ .info = {
+ .platform_callback = {
+ .hardware_init = usbhs_hardware_init,
+ .hardware_exit = usbhs_hardware_exit,
+ .get_id = usbhs_get_id,
+ .phy_reset = usbhs_phy_reset,
+ .get_vbus = usbhs_get_vbus,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ .has_otg = 1,
+ .pipe_type = usbhs_pipe_cfg,
+ .pipe_size = ARRAY_SIZE(usbhs_pipe_cfg),
+ },
+ },
+};
+
+static struct resource usbhs_resources[] = {
+ [0] = {
+ .start = 0xE6890000,
+ .end = 0xE68900e6 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(62),
+ .end = gic_spi(62),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhs_device = {
+ .name = "renesas_usbhs",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbhs_private.info,
+ },
+ .num_resources = ARRAY_SIZE(usbhs_resources),
+ .resource = usbhs_resources,
+};
+
/* LCDC */
static struct fb_videomode kzm_lcdc_mode = {
.name = "WVGA Panel",
@@ -166,6 +330,13 @@ static struct platform_device lcdc_device = {
},
};
+/* Fixed 1.8V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
/* MMCIF */
static struct resource sh_mmcif_resources[] = {
[0] = {
@@ -187,6 +358,8 @@ static struct resource sh_mmcif_resources[] = {
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device mmc_device = {
@@ -200,6 +373,15 @@ static struct platform_device mmc_device = {
.resource = sh_mmcif_resources,
};
+/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */
+static struct regulator_consumer_supply fixed2v8_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
+};
+
/* SDHI */
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
@@ -240,6 +422,50 @@ static struct platform_device sdhi0_device = {
},
};
+/* Micro SD */
+static struct sh_mobile_sdhi_info sdhi2_info = {
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
+ TMIO_MMC_USE_GPIO_CD |
+ TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED,
+ .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
+ .cd_gpio = GPIO_PORT13,
+};
+
+static struct resource sdhi2_resources[] = {
+ [0] = {
+ .name = "SDHI2",
+ .start = 0xee140000,
+ .end = 0xee1400ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+ .start = gic_spi(103),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDCARD,
+ .start = gic_spi(104),
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .name = SH_MOBILE_SDHI_IRQ_SDIO,
+ .start = gic_spi(105),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi2_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(sdhi2_resources),
+ .resource = sdhi2_resources,
+ .dev = {
+ .platform_data = &sdhi2_info,
+ },
+};
+
/* KEY */
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
@@ -267,11 +493,74 @@ static struct platform_device gpio_keys_device = {
},
};
+/* FSI-AK4648 */
+static struct sh_fsi_platform_info fsi_info = {
+ .port_a = {
+ .tx_id = SHDMA_SLAVE_FSI2A_TX,
+ },
+};
+
+static struct resource fsi_resources[] = {
+ [0] = {
+ .name = "FSI",
+ .start = 0xEC230000,
+ .end = 0xEC230400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(146),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device fsi_device = {
+ .name = "sh_fsi2",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(fsi_resources),
+ .resource = fsi_resources,
+ .dev = {
+ .platform_data = &fsi_info,
+ },
+};
+
+static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = {
+ .fmt = SND_SOC_DAIFMT_LEFT_J,
+ .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM,
+ .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS,
+ .sysclk = 11289600,
+};
+
+static struct asoc_simple_card_info fsi2_ak4648_info = {
+ .name = "AK4648",
+ .card = "FSI2A-AK4648",
+ .cpu_dai = "fsia-dai",
+ .codec = "ak4642-codec.0-0012",
+ .platform = "sh_fsi2",
+ .codec_dai = "ak4642-hifi",
+ .init = &fsi2_ak4648_init_info,
+};
+
+static struct platform_device fsi_ak4648_device = {
+ .name = "asoc-simple-card",
+ .dev = {
+ .platform_data = &fsi2_ak4648_info,
+ },
+};
+
/* I2C */
static struct pcf857x_platform_data pcf8575_pdata = {
.gpio_base = GPIO_PCF8575_BASE,
};
+static struct i2c_board_info i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("ak4648", 0x12),
+ },
+ {
+ I2C_BOARD_INFO("r2025sd", 0x32),
+ }
+};
+
static struct i2c_board_info i2c1_devices[] = {
{
I2C_BOARD_INFO("st1232-ts", 0x55),
@@ -289,10 +578,14 @@ static struct i2c_board_info i2c3_devices[] = {
static struct platform_device *kzm_devices[] __initdata = {
&smsc_device,
&usb_host_device,
+ &usbhs_device,
&lcdc_device,
&mmc_device,
&sdhi0_device,
+ &sdhi2_device,
&gpio_keys_device,
+ &fsi_device,
+ &fsi_ak4648_device,
};
/*
@@ -350,6 +643,12 @@ device_initcall(as3711_enable_lcdc_backlight);
static void __init kzm_init(void)
{
+ regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+ ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+ regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
+ ARRAY_SIZE(fixed2v8_power_consumers), 2800000);
+ regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
sh73a0_pinmux_init();
/* enable SCIFA4 */
@@ -427,15 +726,36 @@ static void __init kzm_init(void)
gpio_request(GPIO_PORT15, NULL);
gpio_direction_output(GPIO_PORT15, 1); /* power */
+ /* enable Micro SD */
+ gpio_request(GPIO_FN_SDHID2_0, NULL);
+ gpio_request(GPIO_FN_SDHID2_1, NULL);
+ gpio_request(GPIO_FN_SDHID2_2, NULL);
+ gpio_request(GPIO_FN_SDHID2_3, NULL);
+ gpio_request(GPIO_FN_SDHICMD2, NULL);
+ gpio_request(GPIO_FN_SDHICLK2, NULL);
+ gpio_request(GPIO_PORT14, NULL);
+ gpio_direction_output(GPIO_PORT14, 1); /* power */
+
/* I2C 3 */
gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
+ /* enable FSI2 port A (ak4648) */
+ gpio_request(GPIO_FN_FSIACK, NULL);
+ gpio_request(GPIO_FN_FSIAILR, NULL);
+ gpio_request(GPIO_FN_FSIAIBT, NULL);
+ gpio_request(GPIO_FN_FSIAISLD, NULL);
+ gpio_request(GPIO_FN_FSIAOSLD, NULL);
+
+ /* enable USB */
+ gpio_request(GPIO_FN_VBUS_0, NULL);
+
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
#endif
+ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 150122a44630..7ea2b31e3199 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -41,6 +41,8 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/sh_flctl.h>
#include <linux/pm_clock.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
@@ -203,31 +205,32 @@
* amixer set "HPOUTR Mixer DACH" on
*/
-/*
- * FIXME !!
- *
- * gpio_no_direction
- * gpio_pull_down
- * are quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_no_direction(u32 addr)
+/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
{
- __raw_writeb(0x00, addr);
-}
+ /*
+ * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V
+ * Since we cannot support both voltages, we support the default 1.8V
+ */
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
-static void __init gpio_pull_down(u32 addr)
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xA0;
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
+};
- __raw_writeb(data, addr);
-}
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
/* MTD */
static struct mtd_partition nor_flash_partitions[] = {
@@ -1409,6 +1412,12 @@ static void __init mackerel_init(void)
u32 srcr4;
struct clk *clk;
+ regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+ ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+ regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
@@ -1458,11 +1467,11 @@ static void __init mackerel_init(void)
/* USBHS0 */
gpio_request(GPIO_FN_VBUS0_0, NULL);
- gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+ gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */
/* USBHS1 */
gpio_request(GPIO_FN_VBUS0_1, NULL);
- gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+ gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
/* enable FSI2 port A (ak4643) */
@@ -1475,8 +1484,8 @@ static void __init mackerel_init(void)
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
- gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
- gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+ gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
+ gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
@@ -1614,20 +1623,20 @@ static void __init mackerel_init(void)
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
- sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
- sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
- sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
- sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4lc, &hdmi_lcdc_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4lc, &meram_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &nand_flash_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device);
#endif
- sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi2_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device);
hdmi_init_pm_clock();
sh7372_pm_init();
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 14de3787cafc..3a528cf4366c 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -27,6 +27,8 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/dma-mapping.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <mach/hardware.h>
#include <mach/r8a7779.h>
@@ -37,6 +39,12 @@
#include <asm/hardware/gic.h>
#include <asm/traps.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
/* SMSC LAN89218 */
static struct resource smsc911x_resources[] = {
[0] = {
@@ -73,6 +81,8 @@ static struct platform_device *marzen_devices[] __initdata = {
static void __init marzen_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
r8a7779_pinmux_init();
/* SCIF2 (CN18: DEBUG0) */
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 26eea5f21054..ad5fccc7b5e7 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -43,7 +43,10 @@
/* CPG registers */
#define FRQCRA 0xe6150000
#define FRQCRB 0xe6150004
+#define VCLKCR1 0xE6150008
+#define VCLKCR2 0xE615000c
#define FRQCRC 0xe61500e0
+#define FSIACKCR 0xe6150018
#define PLLC01CR 0xe6150028
#define SUBCKCR 0xe6150080
@@ -54,6 +57,8 @@
#define MSTPSR2 0xe6150040
#define MSTPSR3 0xe6150048
#define MSTPSR4 0xe615004c
+#define FSIBCKCR 0xe6150090
+#define HDMICKCR 0xe6150094
#define SMSTPCR0 0xe6150130
#define SMSTPCR1 0xe6150134
#define SMSTPCR2 0xe6150138
@@ -271,6 +276,13 @@ static struct clk usb24_clk = {
.parent = &usb24s_clk,
};
+/* External FSIACK/FSIBCK clock */
+static struct clk fsiack_clk = {
+};
+
+static struct clk fsibck_clk = {
+};
+
struct clk *main_clks[] = {
&extalr_clk,
&extal1_clk,
@@ -288,6 +300,8 @@ struct clk *main_clks[] = {
&pllc1_div2_clk,
&usb24s_clk,
&usb24_clk,
+ &fsiack_clk,
+ &fsibck_clk,
};
static void div4_kick(struct clk *clk)
@@ -313,6 +327,107 @@ static struct clk_div4_table div4_table = {
.kick = div4_kick,
};
+/* DIV6 reparent */
+enum {
+ DIV6_HDMI,
+ DIV6_VCLK1, DIV6_VCLK2,
+ DIV6_FSIA, DIV6_FSIB,
+ DIV6_REPARENT_NR,
+};
+
+static struct clk *hdmi_parent[] = {
+ [0] = &pllc1_div2_clk,
+ [1] = &system_clk,
+ [2] = &dv_clk
+};
+
+static struct clk *vclk_parents[8] = {
+ [0] = &pllc1_div2_clk,
+ [2] = &dv_clk,
+ [3] = &usb24s_clk,
+ [4] = &extal1_div2_clk,
+ [5] = &extalr_clk,
+};
+
+static struct clk *fsia_parents[] = {
+ [0] = &pllc1_div2_clk,
+ [1] = &fsiack_clk, /* external clock */
+};
+
+static struct clk *fsib_parents[] = {
+ [0] = &pllc1_div2_clk,
+ [1] = &fsibck_clk, /* external clock */
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+ [DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0,
+ hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
+ [DIV6_VCLK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
+ vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3),
+ [DIV6_VCLK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
+ vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3),
+ [DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
+ fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2),
+ [DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
+ fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
+};
+
+/* HDMI1/2 clock */
+static unsigned long hdmi12_recalc(struct clk *clk)
+{
+ u32 val = __raw_readl(HDMICKCR);
+ int shift = (int)clk->priv;
+
+ val >>= shift;
+ val &= 0x3;
+
+ return clk->parent->rate / (1 << val);
+};
+
+static int hdmi12_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, mask;
+ int i, shift;
+
+ for (i = 0; i < 3; i++)
+ if (rate == clk->parent->rate / (1 << i))
+ goto find;
+ return -ENODEV;
+
+find:
+ shift = (int)clk->priv;
+
+ val = __raw_readl(HDMICKCR);
+ mask = ~(0x3 << shift);
+ val = (val & mask) | i << shift;
+ __raw_writel(val, HDMICKCR);
+
+ return 0;
+};
+
+static struct sh_clk_ops hdmi12_clk_ops = {
+ .recalc = hdmi12_recalc,
+ .set_rate = hdmi12_set_rate,
+};
+
+static struct clk hdmi1_clk = {
+ .ops = &hdmi12_clk_ops,
+ .priv = (void *)9,
+ .parent = &div6_reparent_clks[DIV6_HDMI], /* late install */
+};
+
+static struct clk hdmi2_clk = {
+ .ops = &hdmi12_clk_ops,
+ .priv = (void *)11,
+ .parent = &div6_reparent_clks[DIV6_HDMI], /* late install */
+};
+
+static struct clk *late_main_clks[] = {
+ &hdmi1_clk,
+ &hdmi2_clk,
+};
+
+/* MSTP */
enum {
DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
@@ -343,11 +458,12 @@ static struct clk div6_clks[DIV6_NR] = {
};
enum {
- MSTP125,
+ MSTP128, MSTP127, MSTP125,
MSTP116, MSTP111, MSTP100, MSTP117,
MSTP230,
MSTP222,
+ MSTP218, MSTP217, MSTP216, MSTP214,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP329, MSTP328, MSTP323, MSTP320,
@@ -360,6 +476,8 @@ enum {
};
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP128] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 28, 0), /* CEU21 */
+ [MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 27, 0), /* CEU20 */
[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
[MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
@@ -368,6 +486,10 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */
[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */
+ [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */
+ [MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */
+ [MSTP216] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */
+ [MSTP214] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */
[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
[MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
@@ -408,6 +530,12 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
CLKDEV_CON_ID("usb24s", &usb24s_clk),
+ CLKDEV_CON_ID("hdmi1", &hdmi1_clk),
+ CLKDEV_CON_ID("hdmi2", &hdmi2_clk),
+ CLKDEV_CON_ID("video1", &div6_reparent_clks[DIV6_VCLK1]),
+ CLKDEV_CON_ID("video2", &div6_reparent_clks[DIV6_VCLK2]),
+ CLKDEV_CON_ID("fsiack", &fsiack_clk),
+ CLKDEV_CON_ID("fsibck", &fsibck_clk),
/* DIV4 clocks */
CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
@@ -430,6 +558,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]),
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]),
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]),
+ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]),
+ CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
@@ -438,7 +568,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
-
+ CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]),
+ CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]),
+ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]),
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
@@ -459,6 +592,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("phy", "renesas_usbhs", &mstp_clks[MSTP406]),
CLKDEV_ICK_ID("pci", "renesas_usbhs", &div4_clks[DIV4_USBP]),
CLKDEV_ICK_ID("usb24", "renesas_usbhs", &usb24_clk),
+ CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
+
+ CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
+ CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
};
void __init r8a7740_clock_init(u8 md_ck)
@@ -495,7 +632,14 @@ void __init r8a7740_clock_init(u8 md_ck)
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_div6_reparent_register(div6_reparent_clks,
+ DIV6_REPARENT_NR);
+
+ if (!ret)
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+ ret = clk_register(late_main_clks[k]);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 7d6e9fe47b56..339c62c824d5 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -162,7 +162,7 @@ void __init r8a7779_clock_init(void)
ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
ret = clk_register(late_main_clks[k]);
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index 006e7b5d304c..162b791b8984 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -344,7 +344,7 @@ void __init sh7367_clock_init(void)
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 94d1f88246d3..5a2894b1c965 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -704,7 +704,7 @@ void __init sh7372_clock_init(void)
ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
ret = clk_register(late_main_clks[k]);
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
index 0798a15936c3..85f2a3ec2c44 100644
--- a/arch/arm/mach-shmobile/clock-sh7377.c
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -355,7 +355,7 @@ void __init sh7377_clock_init(void)
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 3946c4ba2aa8..7f8da18a8580 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = {
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
- MSTP219, MSTP218,
+ MSTP219, MSTP218, MSTP217,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP331, MSTP329, MSTP325, MSTP323,
+ MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322,
MSTP314, MSTP313, MSTP312, MSTP311,
MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
@@ -498,6 +498,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
+ [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* MP-DMAC */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
@@ -507,8 +508,10 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+ [MSTP328] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /*FSI*/
[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
+ [MSTP322] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 22, 0), /* USB */
[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
@@ -553,6 +556,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
+ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
@@ -562,8 +566,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
+ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
@@ -612,7 +618,7 @@ void __init sh73a0_clock_init(void)
ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
ret = clk_register(late_main_clks[k]);
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 01e2bc014f15..45e61dada030 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -77,6 +77,7 @@ extern void r8a7779_add_standard_devices(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
extern void r8a7779_pm_init(void);
+extern void r8a7740_meram_workaround(void);
extern unsigned int r8a7779_get_core_count(void);
extern int r8a7779_platform_cpu_kill(unsigned int cpu);
diff --git a/arch/arm/mach-shmobile/include/mach/dma-register.h b/arch/arm/mach-shmobile/include/mach/dma-register.h
new file mode 100644
index 000000000000..97c40bd9b94f
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/dma-register.h
@@ -0,0 +1,84 @@
+/*
+ * SH-ARM CPU-specific DMA definitions, used by both DMA drivers
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp
+ *
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DMA_REGISTER_H
+#define DMA_REGISTER_H
+
+/*
+ * Direct Memory Access Controller
+ */
+
+/* Transmit sizes and respective CHCR register values */
+enum {
+ XMIT_SZ_8BIT = 0,
+ XMIT_SZ_16BIT = 1,
+ XMIT_SZ_32BIT = 2,
+ XMIT_SZ_64BIT = 7,
+ XMIT_SZ_128BIT = 3,
+ XMIT_SZ_256BIT = 4,
+ XMIT_SZ_512BIT = 5,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+static const unsigned int dma_ts_shift[] = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ [XMIT_SZ_64BIT] = 3,
+ [XMIT_SZ_128BIT] = 4,
+ [XMIT_SZ_256BIT] = 5,
+ [XMIT_SZ_512BIT] = 6,
+};
+
+#define TS_LOW_BIT 0x3 /* --xx */
+#define TS_HI_BIT 0xc /* xx-- */
+
+#define TS_LOW_SHIFT (3)
+#define TS_HI_SHIFT (20 - 2) /* 2 bits for shifted low TS */
+
+#define TS_INDEX2VAL(i) \
+ ((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
+ (((i) & TS_HI_BIT) << TS_HI_SHIFT))
+
+#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
+
+
+/*
+ * USB High-Speed DMAC
+ */
+/* Transmit sizes and respective CHCR register values */
+enum {
+ USBTS_XMIT_SZ_8BYTE = 0,
+ USBTS_XMIT_SZ_16BYTE = 1,
+ USBTS_XMIT_SZ_32BYTE = 2,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+static const unsigned int dma_usbts_shift[] = {
+ [USBTS_XMIT_SZ_8BYTE] = 3,
+ [USBTS_XMIT_SZ_16BYTE] = 4,
+ [USBTS_XMIT_SZ_32BYTE] = 5,
+};
+
+#define USBTS_LOW_BIT 0x3 /* --xx */
+#define USBTS_HI_BIT 0x0 /* ---- */
+
+#define USBTS_LOW_SHIFT 6
+#define USBTS_HI_SHIFT 0
+
+#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
+
+#endif /* DMA_REGISTER_H */
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index de795b42232a..844507d937cb 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sh_pfc.h>
+#include <linux/io.h>
#ifdef CONFIG_GPIOLIB
@@ -27,4 +28,35 @@ static inline int irq_to_gpio(unsigned int irq)
#endif /* CONFIG_GPIOLIB */
+/*
+ * FIXME !!
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static inline void __init gpio_direction_none(u32 addr)
+{
+ __raw_writeb(0x00, addr);
+}
+
+static inline void __init gpio_request_pullup(u32 addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xC0;
+ __raw_writeb(data, addr);
+}
+
+static inline void __init gpio_request_pulldown(u32 addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xA0;
+
+ __raw_writeb(data, addr);
+}
+
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h b/arch/arm/mach-shmobile/include/mach/pm-rmobile.h
new file mode 100644
index 000000000000..5a402840fe28
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/pm-rmobile.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef PM_RMOBILE_H
+#define PM_RMOBILE_H
+
+#include <linux/pm_domain.h>
+
+struct platform_device;
+
+struct rmobile_pm_domain {
+ struct generic_pm_domain genpd;
+ struct dev_power_governor *gov;
+ int (*suspend)(void);
+ void (*resume)(void);
+ unsigned int bit_shift;
+ bool no_debug;
+};
+
+static inline
+struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
+{
+ return container_of(d, struct rmobile_pm_domain, genpd);
+}
+
+#ifdef CONFIG_PM
+extern void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd);
+extern void rmobile_add_device_to_domain(struct rmobile_pm_domain *rmobile_pd,
+ struct platform_device *pdev);
+extern void rmobile_pm_add_subdomain(struct rmobile_pm_domain *rmobile_pd,
+ struct rmobile_pm_domain *rmobile_sd);
+#else
+#define rmobile_init_pm_domain(pd) do { } while (0)
+#define rmobile_add_device_to_domain(pd, pdev) do { } while (0)
+#define rmobile_pm_add_subdomain(pd, sd) do { } while (0)
+#endif /* CONFIG_PM */
+
+#endif /* PM_RMOBILE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index 9d447abb969c..7143147780df 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -19,6 +19,8 @@
#ifndef __ASM_R8A7740_H__
#define __ASM_R8A7740_H__
+#include <mach/pm-rmobile.h>
+
/*
* MD_CKx pin
*/
@@ -139,7 +141,7 @@ enum {
GPIO_FN_DBGMD10, GPIO_FN_DBGMD11, GPIO_FN_DBGMD20,
GPIO_FN_DBGMD21,
- /* FSI */
+ /* FSI-A */
GPIO_FN_FSIAISLD_PORT0, /* FSIAISLD Port 0/5 */
GPIO_FN_FSIAISLD_PORT5,
GPIO_FN_FSIASPDIF_PORT9, /* FSIASPDIF Port 9/18 */
@@ -150,6 +152,9 @@ enum {
GPIO_FN_FSIACK, GPIO_FN_FSIAILR,
GPIO_FN_FSIAIBT,
+ /* FSI-B */
+ GPIO_FN_FSIBCK,
+
/* FMSI */
GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */
GPIO_FN_FMSISLD_PORT6,
@@ -565,6 +570,10 @@ enum {
GPIO_FN_RESETP_PULLUP,
GPIO_FN_RESETP_PLAIN,
+ /* HDMI */
+ GPIO_FN_HDMI_HPD,
+ GPIO_FN_HDMI_CEC,
+
/* SDENC */
GPIO_FN_SDENC_CPG,
GPIO_FN_SDENC_DV_CLKI,
@@ -581,4 +590,26 @@ enum {
GPIO_FN_TRACEAUD_FROM_MEMC,
};
+/* DMA slave IDs */
+enum {
+ SHDMA_SLAVE_INVALID,
+ SHDMA_SLAVE_SDHI0_RX,
+ SHDMA_SLAVE_SDHI0_TX,
+ SHDMA_SLAVE_SDHI1_RX,
+ SHDMA_SLAVE_SDHI1_TX,
+ SHDMA_SLAVE_SDHI2_RX,
+ SHDMA_SLAVE_SDHI2_TX,
+ SHDMA_SLAVE_FSIA_RX,
+ SHDMA_SLAVE_FSIA_TX,
+ SHDMA_SLAVE_FSIB_TX,
+ SHDMA_SLAVE_USBHS_TX,
+ SHDMA_SLAVE_USBHS_RX,
+};
+
+#ifdef CONFIG_PM
+extern struct rmobile_pm_domain r8a7740_pd_a4s;
+extern struct rmobile_pm_domain r8a7740_pd_a3sp;
+extern struct rmobile_pm_domain r8a7740_pd_a4lc;
+#endif /* CONFIG_PM */
+
#endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index 915d0093da08..b59048e6d8fd 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -13,6 +13,7 @@
#include <linux/sh_clk.h>
#include <linux/pm_domain.h>
+#include <mach/pm-rmobile.h>
/*
* Pin Function Controller:
@@ -477,42 +478,16 @@ extern struct clk sh7372_fsibck_clk;
extern struct clk sh7372_fsidiva_clk;
extern struct clk sh7372_fsidivb_clk;
-struct platform_device;
-
-struct sh7372_pm_domain {
- struct generic_pm_domain genpd;
- struct dev_power_governor *gov;
- int (*suspend)(void);
- void (*resume)(void);
- unsigned int bit_shift;
- bool no_debug;
-};
-
-static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d)
-{
- return container_of(d, struct sh7372_pm_domain, genpd);
-}
-
#ifdef CONFIG_PM
-extern struct sh7372_pm_domain sh7372_a4lc;
-extern struct sh7372_pm_domain sh7372_a4mp;
-extern struct sh7372_pm_domain sh7372_d4;
-extern struct sh7372_pm_domain sh7372_a4r;
-extern struct sh7372_pm_domain sh7372_a3rv;
-extern struct sh7372_pm_domain sh7372_a3ri;
-extern struct sh7372_pm_domain sh7372_a4s;
-extern struct sh7372_pm_domain sh7372_a3sp;
-extern struct sh7372_pm_domain sh7372_a3sg;
-
-extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd);
-extern void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
- struct platform_device *pdev);
-extern void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd,
- struct sh7372_pm_domain *sh7372_sd);
-#else
-#define sh7372_init_pm_domain(pd) do { } while(0)
-#define sh7372_add_device_to_domain(pd, pdev) do { } while(0)
-#define sh7372_pm_add_subdomain(pd, sd) do { } while(0)
+extern struct rmobile_pm_domain sh7372_pd_a4lc;
+extern struct rmobile_pm_domain sh7372_pd_a4mp;
+extern struct rmobile_pm_domain sh7372_pd_d4;
+extern struct rmobile_pm_domain sh7372_pd_a4r;
+extern struct rmobile_pm_domain sh7372_pd_a3rv;
+extern struct rmobile_pm_domain sh7372_pd_a3ri;
+extern struct rmobile_pm_domain sh7372_pd_a4s;
+extern struct rmobile_pm_domain sh7372_pd_a3sp;
+extern struct rmobile_pm_domain sh7372_pd_a3sg;
#endif /* CONFIG_PM */
extern void sh7372_intcs_suspend(void);
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 398e2c10913b..fe950f25d793 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -516,6 +516,13 @@ enum {
SHDMA_SLAVE_SDHI2_RX,
SHDMA_SLAVE_MMCIF_TX,
SHDMA_SLAVE_MMCIF_RX,
+ SHDMA_SLAVE_FSI2A_TX,
+ SHDMA_SLAVE_FSI2A_RX,
+ SHDMA_SLAVE_FSI2B_TX,
+ SHDMA_SLAVE_FSI2B_RX,
+ SHDMA_SLAVE_FSI2C_TX,
+ SHDMA_SLAVE_FSI2C_RX,
+ SHDMA_SLAVE_FSI2D_RX,
};
/*
diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c
index 09c42afcb22d..9a69a31918ba 100644
--- a/arch/arm/mach-shmobile/intc-r8a7740.c
+++ b/arch/arm/mach-shmobile/intc-r8a7740.c
@@ -71,10 +71,12 @@ enum {
DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+ HDMI,
USBH_INT, USBH_OHCI, USBH_EHCI, USBH_PME, USBH_BIND,
RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF,
SPU2_0, SPU2_1,
FSI, FMSI,
+ HDMI_SSS, HDMI_KEY,
IPMMU,
AP_ARM_CTIIRQ, AP_ARM_PMURQ,
MFIS2,
@@ -182,6 +184,7 @@ static struct intc_vect intca_vectors[] __initdata = {
INTC_VECT(USBH_EHCI, 0x1580),
INTC_VECT(USBH_PME, 0x15A0),
INTC_VECT(USBH_BIND, 0x15C0),
+ INTC_VECT(HDMI, 0x1700),
INTC_VECT(RSPI_OVRF, 0x1780),
INTC_VECT(RSPI_SPTEF, 0x17A0),
INTC_VECT(RSPI_SPRF, 0x17C0),
@@ -189,6 +192,8 @@ static struct intc_vect intca_vectors[] __initdata = {
INTC_VECT(SPU2_1, 0x1820),
INTC_VECT(FSI, 0x1840),
INTC_VECT(FMSI, 0x1860),
+ INTC_VECT(HDMI_SSS, 0x18A0),
+ INTC_VECT(HDMI_KEY, 0x18C0),
INTC_VECT(IPMMU, 0x1920),
INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
INTC_VECT(AP_ARM_PMURQ, 0x19A0),
@@ -304,11 +309,11 @@ static struct intc_mask_reg intca_mask_registers[] __initdata = {
USBH_EHCI, USBH_PME, USBH_BIND, 0 } },
/* IMR3A3 / IMCR3A3 */
{ /* IMR4A3 / IMCR4A3 */ 0xe6950090, 0xe69500d0, 8,
- { 0, 0, 0, 0,
+ { HDMI, 0, 0, 0,
RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, 0 } },
{ /* IMR5A3 / IMCR5A3 */ 0xe6950094, 0xe69500d4, 8,
{ SPU2_0, SPU2_1, FSI, FMSI,
- 0, 0, 0, 0 } },
+ 0, HDMI_SSS, HDMI_KEY, 0 } },
{ /* IMR6A3 / IMCR6A3 */ 0xe6950098, 0xe69500d8, 8,
{ 0, IPMMU, 0, 0,
AP_ARM_CTIIRQ, AP_ARM_PMURQ, 0, 0 } },
@@ -353,10 +358,10 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = {
{ 0xe6950014, 0, 16, 4, /* IPRFA3 */ { USBH2, 0, 0, 0 } },
/* IPRGA3 */
/* IPRHA3 */
- /* IPRIA3 */
+ { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { HDMI, 0, 0, 0 } },
{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { RSPI, 0, 0, 0 } },
{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
- /* IPRLA3 */
+ { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, HDMI_SSS, HDMI_KEY, 0 } },
{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU, 0, 0, 0 } },
{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c
index 670fe1869dbc..ce9e7fa5cc8a 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7740.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7740.c
@@ -169,7 +169,7 @@ enum {
DBGMD10_MARK, DBGMD11_MARK, DBGMD20_MARK,
DBGMD21_MARK,
- /* FSI */
+ /* FSI-A */
FSIAISLD_PORT0_MARK, /* FSIAISLD Port 0/5 */
FSIAISLD_PORT5_MARK,
FSIASPDIF_PORT9_MARK, /* FSIASPDIF Port 9/18 */
@@ -178,6 +178,9 @@ enum {
FSIAOBT_MARK, FSIAOSLD_MARK, FSIAOMC_MARK,
FSIACK_MARK, FSIAILR_MARK, FSIAIBT_MARK,
+ /* FSI-B */
+ FSIBCK_MARK,
+
/* FMSI */
FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */
FMSISLD_PORT6_MARK,
@@ -560,6 +563,9 @@ enum {
/* SDENC */
SDENC_CPG_MARK, SDENC_DV_CLKI_MARK,
+ /* HDMI */
+ HDMI_HPD_MARK, HDMI_CEC_MARK,
+
/* DEBUG */
EDEBGREQ_PULLUP_MARK, /* for JTAG */
EDEBGREQ_PULLDOWN_MARK,
@@ -771,6 +777,7 @@ static pinmux_enum_t pinmux_data[] = {
/* Port11 */
PINMUX_DATA(FSIACK_MARK, PORT11_FN1),
+ PINMUX_DATA(FSIBCK_MARK, PORT11_FN2),
PINMUX_DATA(IRQ2_PORT11_MARK, PORT11_FN0, MSEL1CR_2_0),
/* Port12 */
@@ -1254,7 +1261,7 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(A21_MARK, PORT120_FN1),
PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT120_FN2),
PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK, PORT120_FN3, MSEL4CR_10_0),
- PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_0),
+ PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_1),
/* Port121 */
PINMUX_DATA(A20_MARK, PORT121_FN1),
@@ -1616,13 +1623,15 @@ static pinmux_enum_t pinmux_data[] = {
/* Port209 */
PINMUX_DATA(VBUS_MARK, PORT209_FN1),
- PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_1),
+ PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_0),
/* Port210 */
PINMUX_DATA(IRQ9_PORT210_MARK, PORT210_FN0, MSEL1CR_9_1),
+ PINMUX_DATA(HDMI_HPD_MARK, PORT210_FN1),
/* Port211 */
PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1),
+ PINMUX_DATA(HDMI_CEC_MARK, PORT211_FN1),
/* LCDC select */
PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0),
@@ -1691,7 +1700,7 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(DBGMD10), GPIO_FN(DBGMD11), GPIO_FN(DBGMD20),
GPIO_FN(DBGMD21),
- /* FSI */
+ /* FSI-A */
GPIO_FN(FSIAISLD_PORT0), /* FSIAISLD Port 0/5 */
GPIO_FN(FSIAISLD_PORT5),
GPIO_FN(FSIASPDIF_PORT9), /* FSIASPDIF Port 9/18 */
@@ -1700,6 +1709,9 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), GPIO_FN(FSIAOMC),
GPIO_FN(FSIACK), GPIO_FN(FSIAILR), GPIO_FN(FSIAIBT),
+ /* FSI-B */
+ GPIO_FN(FSIBCK),
+
/* FMSI */
GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */
GPIO_FN(FMSISLD_PORT6),
@@ -2097,6 +2109,10 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(SDENC_CPG),
GPIO_FN(SDENC_DV_CLKI),
+ /* HDMI */
+ GPIO_FN(HDMI_HPD),
+ GPIO_FN(HDMI_CEC),
+
/* SYSC */
GPIO_FN(RESETP_PULLUP),
GPIO_FN(RESETP_PLAIN),
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
new file mode 100644
index 000000000000..893504d012a6
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -0,0 +1,54 @@
+/*
+ * r8a7740 power management support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/console.h>
+#include <mach/pm-rmobile.h>
+
+#ifdef CONFIG_PM
+static int r8a7740_pd_a4s_suspend(void)
+{
+ /*
+ * The A4S domain contains the CPU core and therefore it should
+ * only be turned off if the CPU is in use.
+ */
+ return -EBUSY;
+}
+
+struct rmobile_pm_domain r8a7740_pd_a4s = {
+ .genpd.name = "A4S",
+ .bit_shift = 10,
+ .gov = &pm_domain_always_on_gov,
+ .no_debug = true,
+ .suspend = r8a7740_pd_a4s_suspend,
+};
+
+static int r8a7740_pd_a3sp_suspend(void)
+{
+ /*
+ * Serial consoles make use of SCIF hardware located in A3SP,
+ * keep such power domain on if "no_console_suspend" is set.
+ */
+ return console_suspend_enabled ? 0 : -EBUSY;
+}
+
+struct rmobile_pm_domain r8a7740_pd_a3sp = {
+ .genpd.name = "A3SP",
+ .bit_shift = 11,
+ .gov = &pm_domain_always_on_gov,
+ .no_debug = true,
+ .suspend = r8a7740_pd_a3sp_suspend,
+};
+
+struct rmobile_pm_domain r8a7740_pd_a4lc = {
+ .genpd.name = "A4LC",
+ .bit_shift = 1,
+};
+
+#endif /* CONFIG_PM */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
new file mode 100644
index 000000000000..a8562540f1d6
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -0,0 +1,167 @@
+/*
+ * rmobile power management support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on pm-sh7372.c
+ * Copyright (C) 2011 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_clock.h>
+#include <asm/io.h>
+#include <mach/pm-rmobile.h>
+
+/* SYSC */
+#define SPDCR 0xe6180008
+#define SWUCR 0xe6180014
+#define PSTR 0xe6180080
+
+#define PSTR_RETRIES 100
+#define PSTR_DELAY_US 10
+
+#ifdef CONFIG_PM
+static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
+{
+ struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
+ unsigned int mask = 1 << rmobile_pd->bit_shift;
+
+ if (rmobile_pd->suspend) {
+ int ret = rmobile_pd->suspend();
+
+ if (ret)
+ return ret;
+ }
+
+ if (__raw_readl(PSTR) & mask) {
+ unsigned int retry_count;
+ __raw_writel(mask, SPDCR);
+
+ for (retry_count = PSTR_RETRIES; retry_count; retry_count--) {
+ if (!(__raw_readl(SPDCR) & mask))
+ break;
+ cpu_relax();
+ }
+ }
+
+ if (!rmobile_pd->no_debug)
+ pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n",
+ genpd->name, mask, __raw_readl(PSTR));
+
+ return 0;
+}
+
+static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd,
+ bool do_resume)
+{
+ unsigned int mask = 1 << rmobile_pd->bit_shift;
+ unsigned int retry_count;
+ int ret = 0;
+
+ if (__raw_readl(PSTR) & mask)
+ goto out;
+
+ __raw_writel(mask, SWUCR);
+
+ for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
+ if (!(__raw_readl(SWUCR) & mask))
+ break;
+ if (retry_count > PSTR_RETRIES)
+ udelay(PSTR_DELAY_US);
+ else
+ cpu_relax();
+ }
+ if (!retry_count)
+ ret = -EIO;
+
+ if (!rmobile_pd->no_debug)
+ pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n",
+ rmobile_pd->genpd.name, mask, __raw_readl(PSTR));
+
+out:
+ if (ret == 0 && rmobile_pd->resume && do_resume)
+ rmobile_pd->resume();
+
+ return ret;
+}
+
+static int rmobile_pd_power_up(struct generic_pm_domain *genpd)
+{
+ return __rmobile_pd_power_up(to_rmobile_pd(genpd), true);
+}
+
+static bool rmobile_pd_active_wakeup(struct device *dev)
+{
+ bool (*active_wakeup)(struct device *dev);
+
+ active_wakeup = dev_gpd_data(dev)->ops.active_wakeup;
+ return active_wakeup ? active_wakeup(dev) : true;
+}
+
+static int rmobile_pd_stop_dev(struct device *dev)
+{
+ int (*stop)(struct device *dev);
+
+ stop = dev_gpd_data(dev)->ops.stop;
+ if (stop) {
+ int ret = stop(dev);
+ if (ret)
+ return ret;
+ }
+ return pm_clk_suspend(dev);
+}
+
+static int rmobile_pd_start_dev(struct device *dev)
+{
+ int (*start)(struct device *dev);
+ int ret;
+
+ ret = pm_clk_resume(dev);
+ if (ret)
+ return ret;
+
+ start = dev_gpd_data(dev)->ops.start;
+ if (start)
+ ret = start(dev);
+
+ return ret;
+}
+
+void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
+{
+ struct generic_pm_domain *genpd = &rmobile_pd->genpd;
+ struct dev_power_governor *gov = rmobile_pd->gov;
+
+ pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
+ genpd->dev_ops.stop = rmobile_pd_stop_dev;
+ genpd->dev_ops.start = rmobile_pd_start_dev;
+ genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
+ genpd->dev_irq_safe = true;
+ genpd->power_off = rmobile_pd_power_down;
+ genpd->power_on = rmobile_pd_power_up;
+ __rmobile_pd_power_up(rmobile_pd, false);
+}
+
+void rmobile_add_device_to_domain(struct rmobile_pm_domain *rmobile_pd,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ pm_genpd_add_device(&rmobile_pd->genpd, dev);
+ if (pm_clk_no_clocks(dev))
+ pm_clk_add(dev, NULL);
+}
+
+void rmobile_pm_add_subdomain(struct rmobile_pm_domain *rmobile_pd,
+ struct rmobile_pm_domain *rmobile_sd)
+{
+ pm_genpd_add_subdomain(&rmobile_pd->genpd, &rmobile_sd->genpd);
+}
+#endif /* CONFIG_PM */
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index a3bdb12acde9..792037069226 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -26,6 +26,7 @@
#include <asm/suspend.h>
#include <mach/common.h>
#include <mach/sh7372.h>
+#include <mach/pm-rmobile.h>
/* DBG */
#define DBGREG1 0xe6100020
@@ -41,13 +42,10 @@
#define PLLC01STPCR 0xe61500c8
/* SYSC */
-#define SPDCR 0xe6180008
-#define SWUCR 0xe6180014
#define SBAR 0xe6180020
#define WUPRMSK 0xe6180028
#define WUPSMSK 0xe618002c
#define WUPSMSK2 0xe6180048
-#define PSTR 0xe6180080
#define WUPSFAC 0xe6180098
#define IRQCR 0xe618022c
#define IRQCR2 0xe6180238
@@ -71,188 +69,48 @@
/* AP-System Core */
#define APARMBAREA 0xe6f10020
-#define PSTR_RETRIES 100
-#define PSTR_DELAY_US 10
-
#ifdef CONFIG_PM
-static int pd_power_down(struct generic_pm_domain *genpd)
-{
- struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
- unsigned int mask = 1 << sh7372_pd->bit_shift;
-
- if (sh7372_pd->suspend) {
- int ret = sh7372_pd->suspend();
-
- if (ret)
- return ret;
- }
-
- if (__raw_readl(PSTR) & mask) {
- unsigned int retry_count;
-
- __raw_writel(mask, SPDCR);
-
- for (retry_count = PSTR_RETRIES; retry_count; retry_count--) {
- if (!(__raw_readl(SPDCR) & mask))
- break;
- cpu_relax();
- }
- }
-
- if (!sh7372_pd->no_debug)
- pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n",
- genpd->name, mask, __raw_readl(PSTR));
-
- return 0;
-}
-
-static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
-{
- unsigned int mask = 1 << sh7372_pd->bit_shift;
- unsigned int retry_count;
- int ret = 0;
-
- if (__raw_readl(PSTR) & mask)
- goto out;
-
- __raw_writel(mask, SWUCR);
-
- for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
- if (!(__raw_readl(SWUCR) & mask))
- break;
- if (retry_count > PSTR_RETRIES)
- udelay(PSTR_DELAY_US);
- else
- cpu_relax();
- }
- if (!retry_count)
- ret = -EIO;
-
- if (!sh7372_pd->no_debug)
- pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n",
- sh7372_pd->genpd.name, mask, __raw_readl(PSTR));
-
- out:
- if (ret == 0 && sh7372_pd->resume && do_resume)
- sh7372_pd->resume();
-
- return ret;
-}
-
-static int pd_power_up(struct generic_pm_domain *genpd)
-{
- return __pd_power_up(to_sh7372_pd(genpd), true);
-}
-
-static int sh7372_a4r_suspend(void)
-{
- sh7372_intcs_suspend();
- __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */
- return 0;
-}
-
-static bool pd_active_wakeup(struct device *dev)
-{
- bool (*active_wakeup)(struct device *dev);
-
- active_wakeup = dev_gpd_data(dev)->ops.active_wakeup;
- return active_wakeup ? active_wakeup(dev) : true;
-}
-
-static int sh7372_stop_dev(struct device *dev)
-{
- int (*stop)(struct device *dev);
-
- stop = dev_gpd_data(dev)->ops.stop;
- if (stop) {
- int ret = stop(dev);
- if (ret)
- return ret;
- }
- return pm_clk_suspend(dev);
-}
-
-static int sh7372_start_dev(struct device *dev)
-{
- int (*start)(struct device *dev);
- int ret;
-
- ret = pm_clk_resume(dev);
- if (ret)
- return ret;
-
- start = dev_gpd_data(dev)->ops.start;
- if (start)
- ret = start(dev);
-
- return ret;
-}
-
-void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
-{
- struct generic_pm_domain *genpd = &sh7372_pd->genpd;
- struct dev_power_governor *gov = sh7372_pd->gov;
-
- pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
- genpd->dev_ops.stop = sh7372_stop_dev;
- genpd->dev_ops.start = sh7372_start_dev;
- genpd->dev_ops.active_wakeup = pd_active_wakeup;
- genpd->dev_irq_safe = true;
- genpd->power_off = pd_power_down;
- genpd->power_on = pd_power_up;
- __pd_power_up(sh7372_pd, false);
-}
-
-void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
- struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
-
- pm_genpd_add_device(&sh7372_pd->genpd, dev);
- if (pm_clk_no_clocks(dev))
- pm_clk_add(dev, NULL);
-}
-
-void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd,
- struct sh7372_pm_domain *sh7372_sd)
-{
- pm_genpd_add_subdomain(&sh7372_pd->genpd, &sh7372_sd->genpd);
-}
-
-struct sh7372_pm_domain sh7372_a4lc = {
+struct rmobile_pm_domain sh7372_pd_a4lc = {
.genpd.name = "A4LC",
.bit_shift = 1,
};
-struct sh7372_pm_domain sh7372_a4mp = {
+struct rmobile_pm_domain sh7372_pd_a4mp = {
.genpd.name = "A4MP",
.bit_shift = 2,
};
-struct sh7372_pm_domain sh7372_d4 = {
+struct rmobile_pm_domain sh7372_pd_d4 = {
.genpd.name = "D4",
.bit_shift = 3,
};
-struct sh7372_pm_domain sh7372_a4r = {
+static int sh7372_a4r_pd_suspend(void)
+{
+ sh7372_intcs_suspend();
+ __raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */
+ return 0;
+}
+
+struct rmobile_pm_domain sh7372_pd_a4r = {
.genpd.name = "A4R",
.bit_shift = 5,
- .suspend = sh7372_a4r_suspend,
+ .suspend = sh7372_a4r_pd_suspend,
.resume = sh7372_intcs_resume,
};
-struct sh7372_pm_domain sh7372_a3rv = {
+struct rmobile_pm_domain sh7372_pd_a3rv = {
.genpd.name = "A3RV",
.bit_shift = 6,
};
-struct sh7372_pm_domain sh7372_a3ri = {
+struct rmobile_pm_domain sh7372_pd_a3ri = {
.genpd.name = "A3RI",
.bit_shift = 8,
};
-static int sh7372_a4s_suspend(void)
+static int sh7372_pd_a4s_suspend(void)
{
/*
* The A4S domain contains the CPU core and therefore it should
@@ -261,15 +119,15 @@ static int sh7372_a4s_suspend(void)
return -EBUSY;
}
-struct sh7372_pm_domain sh7372_a4s = {
+struct rmobile_pm_domain sh7372_pd_a4s = {
.genpd.name = "A4S",
.bit_shift = 10,
.gov = &pm_domain_always_on_gov,
.no_debug = true,
- .suspend = sh7372_a4s_suspend,
+ .suspend = sh7372_pd_a4s_suspend,
};
-static int sh7372_a3sp_suspend(void)
+static int sh7372_a3sp_pd_suspend(void)
{
/*
* Serial consoles make use of SCIF hardware located in A3SP,
@@ -278,32 +136,22 @@ static int sh7372_a3sp_suspend(void)
return console_suspend_enabled ? 0 : -EBUSY;
}
-struct sh7372_pm_domain sh7372_a3sp = {
+struct rmobile_pm_domain sh7372_pd_a3sp = {
.genpd.name = "A3SP",
.bit_shift = 11,
.gov = &pm_domain_always_on_gov,
.no_debug = true,
- .suspend = sh7372_a3sp_suspend,
+ .suspend = sh7372_a3sp_pd_suspend,
};
-struct sh7372_pm_domain sh7372_a3sg = {
+struct rmobile_pm_domain sh7372_pd_a3sg = {
.genpd.name = "A3SG",
.bit_shift = 13,
};
-#else /* !CONFIG_PM */
-
-static inline void sh7372_a3sp_init(void) {}
-
-#endif /* !CONFIG_PM */
+#endif /* CONFIG_PM */
#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
-static int sh7372_do_idle_core_standby(unsigned long unused)
-{
- cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */
- return 0;
-}
-
static void sh7372_set_reset_vector(unsigned long address)
{
/* set reset vector, translate 4k */
@@ -311,21 +159,6 @@ static void sh7372_set_reset_vector(unsigned long address)
__raw_writel(0, APARMBAREA);
}
-static void sh7372_enter_core_standby(void)
-{
- sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
-
- /* enter sleep mode with SYSTBCR to 0x10 */
- __raw_writel(0x10, SYSTBCR);
- cpu_suspend(0, sh7372_do_idle_core_standby);
- __raw_writel(0, SYSTBCR);
-
- /* disable reset vector translation */
- __raw_writel(0, SBAR);
-}
-#endif
-
-#ifdef CONFIG_SUSPEND
static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode)
{
if (pllc0_on)
@@ -465,22 +298,42 @@ static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2)
static void sh7372_enter_a3sm_common(int pllc0_on)
{
+ /* use INTCA together with SYSC for wakeup */
+ sh7372_setup_sysc(1 << 0, 0);
sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
sh7372_enter_sysc(pllc0_on, 1 << 12);
}
+#endif /* CONFIG_SUSPEND || CONFIG_CPU_IDLE */
-static void sh7372_enter_a4s_common(int pllc0_on)
+#ifdef CONFIG_CPU_IDLE
+static int sh7372_do_idle_core_standby(unsigned long unused)
{
- sh7372_intca_suspend();
- memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
- sh7372_set_reset_vector(SMFRAM);
- sh7372_enter_sysc(pllc0_on, 1 << 10);
- sh7372_intca_resume();
+ cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */
+ return 0;
}
-#endif
+static void sh7372_enter_core_standby(void)
+{
+ sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
-#ifdef CONFIG_CPU_IDLE
+ /* enter sleep mode with SYSTBCR to 0x10 */
+ __raw_writel(0x10, SYSTBCR);
+ cpu_suspend(0, sh7372_do_idle_core_standby);
+ __raw_writel(0, SYSTBCR);
+
+ /* disable reset vector translation */
+ __raw_writel(0, SBAR);
+}
+
+static void sh7372_enter_a3sm_pll_on(void)
+{
+ sh7372_enter_a3sm_common(1);
+}
+
+static void sh7372_enter_a3sm_pll_off(void)
+{
+ sh7372_enter_a3sm_common(0);
+}
static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
{
@@ -492,7 +345,24 @@ static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
state->target_residency = 20 + 10;
state->flags = CPUIDLE_FLAG_TIME_VALID;
shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
+ drv->state_count++;
+
+ state = &drv->states[drv->state_count];
+ snprintf(state->name, CPUIDLE_NAME_LEN, "C3");
+ strncpy(state->desc, "A3SM PLL ON", CPUIDLE_DESC_LEN);
+ state->exit_latency = 20;
+ state->target_residency = 30 + 20;
+ state->flags = CPUIDLE_FLAG_TIME_VALID;
+ shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_a3sm_pll_on;
+ drv->state_count++;
+ state = &drv->states[drv->state_count];
+ snprintf(state->name, CPUIDLE_NAME_LEN, "C4");
+ strncpy(state->desc, "A3SM PLL OFF", CPUIDLE_DESC_LEN);
+ state->exit_latency = 120;
+ state->target_residency = 30 + 120;
+ state->flags = CPUIDLE_FLAG_TIME_VALID;
+ shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_a3sm_pll_off;
drv->state_count++;
}
@@ -505,6 +375,14 @@ static void sh7372_cpuidle_init(void) {}
#endif
#ifdef CONFIG_SUSPEND
+static void sh7372_enter_a4s_common(int pllc0_on)
+{
+ sh7372_intca_suspend();
+ memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
+ sh7372_set_reset_vector(SMFRAM);
+ sh7372_enter_sysc(pllc0_on, 1 << 10);
+ sh7372_intca_resume();
+}
static int sh7372_enter_suspend(suspend_state_t suspend_state)
{
@@ -512,24 +390,21 @@ static int sh7372_enter_suspend(suspend_state_t suspend_state)
/* check active clocks to determine potential wakeup sources */
if (sh7372_sysc_valid(&msk, &msk2)) {
- /* convert INTC mask and sense to SYSC mask and sense */
- sh7372_setup_sysc(msk, msk2);
-
if (!console_suspend_enabled &&
- sh7372_a4s.genpd.status == GPD_STATE_POWER_OFF) {
+ sh7372_pd_a4s.genpd.status == GPD_STATE_POWER_OFF) {
+ /* convert INTC mask/sense to SYSC mask/sense */
+ sh7372_setup_sysc(msk, msk2);
+
/* enter A4S sleep with PLLC0 off */
pr_debug("entering A4S\n");
sh7372_enter_a4s_common(0);
- } else {
- /* enter A3SM sleep with PLLC0 off */
- pr_debug("entering A3SM\n");
- sh7372_enter_a3sm_common(0);
+ return 0;
}
- } else {
- /* default to Core Standby that supports all wakeup sources */
- pr_debug("entering Core Standby\n");
- sh7372_enter_core_standby();
}
+
+ /* default to enter A3SM sleep with PLLC0 off */
+ pr_debug("entering A3SM\n");
+ sh7372_enter_a3sm_common(0);
return 0;
}
@@ -550,7 +425,7 @@ static int sh7372_pm_notifier_fn(struct notifier_block *notifier,
* executed during system suspend and resume, respectively, so
* that those functions don't crash while accessing the INTCS.
*/
- pm_genpd_poweron(&sh7372_a4r.genpd);
+ pm_genpd_poweron(&sh7372_pd_a4r.genpd);
break;
case PM_POST_SUSPEND:
pm_genpd_poweroff_unused();
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index ec4eb49c1693..78948a9dba0e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -23,9 +23,14 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
+#include <linux/dma-mapping.h>
+#include <mach/dma-register.h>
#include <mach/r8a7740.h>
+#include <mach/pm-rmobile.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <asm/mach-types.h>
@@ -276,6 +281,272 @@ static struct platform_device *r8a7740_early_devices[] __initdata = {
&cmt10_device,
};
+/* DMA */
+static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_SDHI0_TX,
+ .addr = 0xe6850030,
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
+ .mid_rid = 0xc1,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI0_RX,
+ .addr = 0xe6850030,
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
+ .mid_rid = 0xc2,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI1_TX,
+ .addr = 0xe6860030,
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
+ .mid_rid = 0xc9,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI1_RX,
+ .addr = 0xe6860030,
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
+ .mid_rid = 0xca,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI2_TX,
+ .addr = 0xe6870030,
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
+ .mid_rid = 0xcd,
+ }, {
+ .slave_id = SHDMA_SLAVE_SDHI2_RX,
+ .addr = 0xe6870030,
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
+ .mid_rid = 0xce,
+ }, {
+ .slave_id = SHDMA_SLAVE_FSIA_TX,
+ .addr = 0xfe1f0024,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xb1,
+ }, {
+ .slave_id = SHDMA_SLAVE_FSIA_RX,
+ .addr = 0xfe1f0020,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xb2,
+ }, {
+ .slave_id = SHDMA_SLAVE_FSIB_TX,
+ .addr = 0xfe1f0064,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xb5,
+ },
+};
+
+#define DMA_CHANNEL(a, b, c) \
+{ \
+ .offset = a, \
+ .dmars = b, \
+ .dmars_bit = c, \
+ .chclr_offset = (0x220 - 0x20) + a \
+}
+
+static const struct sh_dmae_channel r8a7740_dmae_channels[] = {
+ DMA_CHANNEL(0x00, 0, 0),
+ DMA_CHANNEL(0x10, 0, 8),
+ DMA_CHANNEL(0x20, 4, 0),
+ DMA_CHANNEL(0x30, 4, 8),
+ DMA_CHANNEL(0x50, 8, 0),
+ DMA_CHANNEL(0x60, 8, 8),
+};
+
+static struct sh_dmae_pdata dma_platform_data = {
+ .slave = r8a7740_dmae_slaves,
+ .slave_num = ARRAY_SIZE(r8a7740_dmae_slaves),
+ .channel = r8a7740_dmae_channels,
+ .channel_num = ARRAY_SIZE(r8a7740_dmae_channels),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chclr_present = 1,
+};
+
+/* Resource order important! */
+static struct resource r8a7740_dmae0_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xfe008020,
+ .end = 0xfe00828f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMARSx */
+ .start = 0xfe009000,
+ .end = 0xfe00900b,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "error_irq",
+ .start = evt2irq(0x20c0),
+ .end = evt2irq(0x20c0),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* IRQ for channels 0-5 */
+ .start = evt2irq(0x2000),
+ .end = evt2irq(0x20a0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* Resource order important! */
+static struct resource r8a7740_dmae1_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xfe018020,
+ .end = 0xfe01828f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMARSx */
+ .start = 0xfe019000,
+ .end = 0xfe01900b,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "error_irq",
+ .start = evt2irq(0x21c0),
+ .end = evt2irq(0x21c0),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* IRQ for channels 0-5 */
+ .start = evt2irq(0x2100),
+ .end = evt2irq(0x21a0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* Resource order important! */
+static struct resource r8a7740_dmae2_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xfe028020,
+ .end = 0xfe02828f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMARSx */
+ .start = 0xfe029000,
+ .end = 0xfe02900b,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "error_irq",
+ .start = evt2irq(0x22c0),
+ .end = evt2irq(0x22c0),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* IRQ for channels 0-5 */
+ .start = evt2irq(0x2200),
+ .end = evt2irq(0x22a0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dma0_device = {
+ .name = "sh-dma-engine",
+ .id = 0,
+ .resource = r8a7740_dmae0_resources,
+ .num_resources = ARRAY_SIZE(r8a7740_dmae0_resources),
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
+static struct platform_device dma1_device = {
+ .name = "sh-dma-engine",
+ .id = 1,
+ .resource = r8a7740_dmae1_resources,
+ .num_resources = ARRAY_SIZE(r8a7740_dmae1_resources),
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
+static struct platform_device dma2_device = {
+ .name = "sh-dma-engine",
+ .id = 2,
+ .resource = r8a7740_dmae2_resources,
+ .num_resources = ARRAY_SIZE(r8a7740_dmae2_resources),
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
+/* USB-DMAC */
+static const struct sh_dmae_channel r8a7740_usb_dma_channels[] = {
+ {
+ .offset = 0,
+ }, {
+ .offset = 0x20,
+ },
+};
+
+static const struct sh_dmae_slave_config r8a7740_usb_dma_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_USBHS_TX,
+ .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
+ }, {
+ .slave_id = SHDMA_SLAVE_USBHS_RX,
+ .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
+ },
+};
+
+static struct sh_dmae_pdata usb_dma_platform_data = {
+ .slave = r8a7740_usb_dma_slaves,
+ .slave_num = ARRAY_SIZE(r8a7740_usb_dma_slaves),
+ .channel = r8a7740_usb_dma_channels,
+ .channel_num = ARRAY_SIZE(r8a7740_usb_dma_channels),
+ .ts_low_shift = USBTS_LOW_SHIFT,
+ .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT,
+ .ts_high_shift = USBTS_HI_SHIFT,
+ .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT,
+ .ts_shift = dma_usbts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_usbts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chcr_offset = 0x14,
+ .chcr_ie_bit = 1 << 5,
+ .dmaor_is_32bit = 1,
+ .needs_tend_set = 1,
+ .no_dmars = 1,
+ .slave_only = 1,
+};
+
+static struct resource r8a7740_usb_dma_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xe68a0020,
+ .end = 0xe68a0064 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VCR/SWR/DMICR */
+ .start = 0xe68a0000,
+ .end = 0xe68a0014 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* IRQ for channels */
+ .start = evt2irq(0x0a00),
+ .end = evt2irq(0x0a00),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_dma_device = {
+ .name = "sh-dma-engine",
+ .id = 3,
+ .resource = r8a7740_usb_dma_resources,
+ .num_resources = ARRAY_SIZE(r8a7740_usb_dma_resources),
+ .dev = {
+ .platform_data = &usb_dma_platform_data,
+ },
+};
+
/* I2C */
static struct resource i2c0_resources[] = {
[0] = {
@@ -322,8 +593,30 @@ static struct platform_device i2c1_device = {
static struct platform_device *r8a7740_late_devices[] __initdata = {
&i2c0_device,
&i2c1_device,
+ &dma0_device,
+ &dma1_device,
+ &dma2_device,
+ &usb_dma_device,
};
+/*
+ * r8a7740 chip has lasting errata on MERAM buffer.
+ * this is work-around for it.
+ * see
+ * "Media RAM (MERAM)" on r8a7740 documentation
+ */
+#define MEBUFCNTR 0xFE950098
+void r8a7740_meram_workaround(void)
+{
+ void __iomem *reg;
+
+ reg = ioremap_nocache(MEBUFCNTR, 4);
+ if (reg) {
+ iowrite32(0x01600164, reg);
+ iounmap(reg);
+ }
+}
+
#define ICCR 0x0004
#define ICSTART 0x0070
@@ -380,10 +673,31 @@ void __init r8a7740_add_standard_devices(void)
r8a7740_i2c_workaround(&i2c0_device);
r8a7740_i2c_workaround(&i2c1_device);
+ /* PM domain */
+ rmobile_init_pm_domain(&r8a7740_pd_a4s);
+ rmobile_init_pm_domain(&r8a7740_pd_a3sp);
+ rmobile_init_pm_domain(&r8a7740_pd_a4lc);
+
+ rmobile_pm_add_subdomain(&r8a7740_pd_a4s, &r8a7740_pd_a3sp);
+
+ /* add devices */
platform_add_devices(r8a7740_early_devices,
ARRAY_SIZE(r8a7740_early_devices));
platform_add_devices(r8a7740_late_devices,
ARRAY_SIZE(r8a7740_late_devices));
+
+ /* add devices to PM domain */
+
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif0_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif1_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif2_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif3_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif4_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif5_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif6_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scif7_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &scifb_device);
+ rmobile_add_device_to_domain(&r8a7740_pd_a3sp, &i2c1_device);
}
static void __init r8a7740_earlytimer_init(void)
@@ -403,3 +717,49 @@ void __init r8a7740_add_early_devices(void)
/* override timer setup with soc-specific code */
shmobile_timer.init = r8a7740_earlytimer_init;
}
+
+#ifdef CONFIG_USE_OF
+
+void __init r8a7740_add_early_devices_dt(void)
+{
+ shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+
+ early_platform_add_devices(r8a7740_early_devices,
+ ARRAY_SIZE(r8a7740_early_devices));
+
+ /* setup early console here as well */
+ shmobile_setup_console();
+}
+
+static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
+ { }
+};
+
+void __init r8a7740_add_standard_devices_dt(void)
+{
+ /* clocks are setup late during boot in the case of DT */
+ r8a7740_clock_init(0);
+
+ platform_add_devices(r8a7740_early_devices,
+ ARRAY_SIZE(r8a7740_early_devices));
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ r8a7740_auxdata_lookup, NULL);
+}
+
+static const char *r8a7740_boards_compat_dt[] __initdata = {
+ "renesas,r8a7740",
+ NULL,
+};
+
+DT_MACHINE_START(SH7372_DT, "Generic R8A7740 (Flattened Device Tree)")
+ .map_io = r8a7740_map_io,
+ .init_early = r8a7740_add_early_devices_dt,
+ .init_irq = r8a7740_init_irq,
+ .handle_irq = shmobile_handle_irq_intc,
+ .init_machine = r8a7740_add_standard_devices_dt,
+ .timer = &shmobile_timer,
+ .dt_compat = r8a7740_boards_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index fafce9ce8218..838a87be1d5c 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -33,6 +33,7 @@
#include <linux/sh_timer.h>
#include <linux/pm_domain.h>
#include <linux/dma-mapping.h>
+#include <mach/dma-register.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
@@ -335,151 +336,126 @@ static struct platform_device iic1_device = {
};
/* DMA */
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 0,
- XMIT_SZ_16BIT = 1,
- XMIT_SZ_32BIT = 2,
- XMIT_SZ_64BIT = 7,
- XMIT_SZ_128BIT = 3,
- XMIT_SZ_256BIT = 4,
- XMIT_SZ_512BIT = 5,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_64BIT] = 3, \
- [XMIT_SZ_128BIT] = 4, \
- [XMIT_SZ_256BIT] = 5, \
- [XMIT_SZ_512BIT] = 6, \
-}
-
-#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | \
- (((i) & 0xc) << (20 - 2)))
-
static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SCIF0_TX,
.addr = 0xe6c40020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_TX(XMIT_SZ_8BIT),
.mid_rid = 0x21,
}, {
.slave_id = SHDMA_SLAVE_SCIF0_RX,
.addr = 0xe6c40024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_RX(XMIT_SZ_8BIT),
.mid_rid = 0x22,
}, {
.slave_id = SHDMA_SLAVE_SCIF1_TX,
.addr = 0xe6c50020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_TX(XMIT_SZ_8BIT),
.mid_rid = 0x25,
}, {
.slave_id = SHDMA_SLAVE_SCIF1_RX,
.addr = 0xe6c50024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_RX(XMIT_SZ_8BIT),
.mid_rid = 0x26,
}, {
.slave_id = SHDMA_SLAVE_SCIF2_TX,
.addr = 0xe6c60020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_TX(XMIT_SZ_8BIT),
.mid_rid = 0x29,
}, {
.slave_id = SHDMA_SLAVE_SCIF2_RX,
.addr = 0xe6c60024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_RX(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
}, {
.slave_id = SHDMA_SLAVE_SCIF3_TX,
.addr = 0xe6c70020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_TX(XMIT_SZ_8BIT),
.mid_rid = 0x2d,
}, {
.slave_id = SHDMA_SLAVE_SCIF3_RX,
.addr = 0xe6c70024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_RX(XMIT_SZ_8BIT),
.mid_rid = 0x2e,
}, {
.slave_id = SHDMA_SLAVE_SCIF4_TX,
.addr = 0xe6c80020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_TX(XMIT_SZ_8BIT),
.mid_rid = 0x39,
}, {
.slave_id = SHDMA_SLAVE_SCIF4_RX,
.addr = 0xe6c80024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_RX(XMIT_SZ_8BIT),
.mid_rid = 0x3a,
}, {
.slave_id = SHDMA_SLAVE_SCIF5_TX,
.addr = 0xe6cb0020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_TX(XMIT_SZ_8BIT),
.mid_rid = 0x35,
}, {
.slave_id = SHDMA_SLAVE_SCIF5_RX,
.addr = 0xe6cb0024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_RX(XMIT_SZ_8BIT),
.mid_rid = 0x36,
}, {
.slave_id = SHDMA_SLAVE_SCIF6_TX,
.addr = 0xe6c30040,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_TX(XMIT_SZ_8BIT),
.mid_rid = 0x3d,
}, {
.slave_id = SHDMA_SLAVE_SCIF6_RX,
.addr = 0xe6c30060,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = CHCR_RX(XMIT_SZ_8BIT),
.mid_rid = 0x3e,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_TX,
.addr = 0xe6850030,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
.mid_rid = 0xc1,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_RX,
.addr = 0xe6850030,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
.mid_rid = 0xc2,
}, {
.slave_id = SHDMA_SLAVE_SDHI1_TX,
.addr = 0xe6860030,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
.mid_rid = 0xc9,
}, {
.slave_id = SHDMA_SLAVE_SDHI1_RX,
.addr = 0xe6860030,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
.mid_rid = 0xca,
}, {
.slave_id = SHDMA_SLAVE_SDHI2_TX,
.addr = 0xe6870030,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = CHCR_TX(XMIT_SZ_16BIT),
.mid_rid = 0xcd,
}, {
.slave_id = SHDMA_SLAVE_SDHI2_RX,
.addr = 0xe6870030,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = CHCR_RX(XMIT_SZ_16BIT),
.mid_rid = 0xce,
}, {
.slave_id = SHDMA_SLAVE_FSIA_TX,
.addr = 0xfe1f0024,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
.mid_rid = 0xb1,
}, {
.slave_id = SHDMA_SLAVE_FSIA_RX,
.addr = 0xfe1f0020,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
.mid_rid = 0xb2,
}, {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
.addr = 0xe6bd0034,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
.mid_rid = 0xd1,
}, {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
.addr = 0xe6bd0034,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
.mid_rid = 0xd2,
},
};
@@ -520,19 +496,17 @@ static const struct sh_dmae_channel sh7372_dmae_channels[] = {
}
};
-static const unsigned int ts_shift[] = TS_SHIFT;
-
static struct sh_dmae_pdata dma_platform_data = {
.slave = sh7372_dmae_slaves,
.slave_num = ARRAY_SIZE(sh7372_dmae_slaves),
.channel = sh7372_dmae_channels,
.channel_num = ARRAY_SIZE(sh7372_dmae_channels),
- .ts_low_shift = 3,
- .ts_low_mask = 0x18,
- .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */
- .ts_high_mask = 0x00300000,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
.dmaor_init = DMAOR_DME,
.chclr_present = 1,
};
@@ -654,17 +628,6 @@ static struct platform_device dma2_device = {
/*
* USB-DMAC
*/
-
-unsigned int usbts_shift[] = {3, 4, 5};
-
-enum {
- XMIT_SZ_8BYTE = 0,
- XMIT_SZ_16BYTE = 1,
- XMIT_SZ_32BYTE = 2,
-};
-
-#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
-
static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = {
{
.offset = 0,
@@ -677,10 +640,10 @@ static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = {
static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = {
{
.slave_id = SHDMA_SLAVE_USB0_TX,
- .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
}, {
.slave_id = SHDMA_SLAVE_USB0_RX,
- .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
},
};
@@ -689,12 +652,12 @@ static struct sh_dmae_pdata usb_dma0_platform_data = {
.slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves),
.channel = sh7372_usb_dmae_channels,
.channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels),
- .ts_low_shift = 6,
- .ts_low_mask = 0xc0,
- .ts_high_shift = 0,
- .ts_high_mask = 0,
- .ts_shift = usbts_shift,
- .ts_shift_num = ARRAY_SIZE(usbts_shift),
+ .ts_low_shift = USBTS_LOW_SHIFT,
+ .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT,
+ .ts_high_shift = USBTS_HI_SHIFT,
+ .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT,
+ .ts_shift = dma_usbts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_usbts_shift),
.dmaor_init = DMAOR_DME,
.chcr_offset = 0x14,
.chcr_ie_bit = 1 << 5,
@@ -739,10 +702,10 @@ static struct platform_device usb_dma0_device = {
static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = {
{
.slave_id = SHDMA_SLAVE_USB1_TX,
- .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
}, {
.slave_id = SHDMA_SLAVE_USB1_RX,
- .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+ .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
},
};
@@ -751,12 +714,12 @@ static struct sh_dmae_pdata usb_dma1_platform_data = {
.slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves),
.channel = sh7372_usb_dmae_channels,
.channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels),
- .ts_low_shift = 6,
- .ts_low_mask = 0xc0,
- .ts_high_shift = 0,
- .ts_high_mask = 0,
- .ts_shift = usbts_shift,
- .ts_shift_num = ARRAY_SIZE(usbts_shift),
+ .ts_low_shift = USBTS_LOW_SHIFT,
+ .ts_low_mask = USBTS_LOW_BIT << USBTS_LOW_SHIFT,
+ .ts_high_shift = USBTS_HI_SHIFT,
+ .ts_high_mask = USBTS_HI_BIT << USBTS_HI_SHIFT,
+ .ts_shift = dma_usbts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_usbts_shift),
.dmaor_init = DMAOR_DME,
.chcr_offset = 0x14,
.chcr_ie_bit = 1 << 5,
@@ -1038,21 +1001,21 @@ static struct platform_device *sh7372_late_devices[] __initdata = {
void __init sh7372_add_standard_devices(void)
{
- sh7372_init_pm_domain(&sh7372_a4lc);
- sh7372_init_pm_domain(&sh7372_a4mp);
- sh7372_init_pm_domain(&sh7372_d4);
- sh7372_init_pm_domain(&sh7372_a4r);
- sh7372_init_pm_domain(&sh7372_a3rv);
- sh7372_init_pm_domain(&sh7372_a3ri);
- sh7372_init_pm_domain(&sh7372_a4s);
- sh7372_init_pm_domain(&sh7372_a3sp);
- sh7372_init_pm_domain(&sh7372_a3sg);
-
- sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv);
- sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc);
-
- sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sg);
- sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sp);
+ rmobile_init_pm_domain(&sh7372_pd_a4lc);
+ rmobile_init_pm_domain(&sh7372_pd_a4mp);
+ rmobile_init_pm_domain(&sh7372_pd_d4);
+ rmobile_init_pm_domain(&sh7372_pd_a4r);
+ rmobile_init_pm_domain(&sh7372_pd_a3rv);
+ rmobile_init_pm_domain(&sh7372_pd_a3ri);
+ rmobile_init_pm_domain(&sh7372_pd_a4s);
+ rmobile_init_pm_domain(&sh7372_pd_a3sp);
+ rmobile_init_pm_domain(&sh7372_pd_a3sg);
+
+ rmobile_pm_add_subdomain(&sh7372_pd_a4lc, &sh7372_pd_a3rv);
+ rmobile_pm_add_subdomain(&sh7372_pd_a4r, &sh7372_pd_a4lc);
+
+ rmobile_pm_add_subdomain(&sh7372_pd_a4s, &sh7372_pd_a3sg);
+ rmobile_pm_add_subdomain(&sh7372_pd_a4s, &sh7372_pd_a3sp);
platform_add_devices(sh7372_early_devices,
ARRAY_SIZE(sh7372_early_devices));
@@ -1060,30 +1023,30 @@ void __init sh7372_add_standard_devices(void)
platform_add_devices(sh7372_late_devices,
ARRAY_SIZE(sh7372_late_devices));
- sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device);
- sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device);
- sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &scif0_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &scif1_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &scif2_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &scif3_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &scif4_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &scif5_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &scif6_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &iic1_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &dma0_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &dma1_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &dma2_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma0_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma1_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &iic0_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &veu0_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &veu1_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &tmu00_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &tmu01_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3rv, &vpu_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4mp, &spu0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4mp, &spu1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif2_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif3_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif4_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif5_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &scif6_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &iic1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &dma2_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usb_dma0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usb_dma1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &iic0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu2_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &veu3_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &jpu_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &tmu00_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &tmu01_device);
}
static void __init sh7372_earlytimer_init(void)
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
index d576a6abbade..855b1506caf8 100644
--- a/arch/arm/mach-shmobile/setup-sh7377.c
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
#include <linux/uio_driver.h>
#include <linux/delay.h>
#include <linux/input.h>
@@ -500,3 +501,49 @@ void __init sh7377_add_early_devices(void)
/* override timer setup with soc-specific code */
shmobile_timer.init = sh7377_earlytimer_init;
}
+
+#ifdef CONFIG_USE_OF
+
+void __init sh7377_add_early_devices_dt(void)
+{
+ shmobile_setup_delay(600, 1, 3); /* Cortex-A8 @ 600MHz */
+
+ early_platform_add_devices(sh7377_early_devices,
+ ARRAY_SIZE(sh7377_early_devices));
+
+ /* setup early console here as well */
+ shmobile_setup_console();
+}
+
+static const struct of_dev_auxdata sh7377_auxdata_lookup[] __initconst = {
+ { }
+};
+
+void __init sh7377_add_standard_devices_dt(void)
+{
+ /* clocks are setup late during boot in the case of DT */
+ sh7377_clock_init();
+
+ platform_add_devices(sh7377_early_devices,
+ ARRAY_SIZE(sh7377_early_devices));
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ sh7377_auxdata_lookup, NULL);
+}
+
+static const char *sh7377_boards_compat_dt[] __initdata = {
+ "renesas,sh7377",
+ NULL,
+};
+
+DT_MACHINE_START(SH7377_DT, "Generic SH7377 (Flattened Device Tree)")
+ .map_io = sh7377_map_io,
+ .init_early = sh7377_add_early_devices_dt,
+ .init_irq = sh7377_init_irq,
+ .handle_irq = shmobile_handle_irq_intc,
+ .init_machine = sh7377_add_standard_devices_dt,
+ .timer = &shmobile_timer,
+ .dt_compat = sh7377_boards_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 04a0dfe75493..d230af656fc9 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -30,6 +30,7 @@
#include <linux/sh_dma.h>
#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
+#include <mach/dma-register.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/sh73a0.h>
@@ -415,32 +416,6 @@ static struct platform_device i2c4_device = {
.num_resources = ARRAY_SIZE(i2c4_resources),
};
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 0,
- XMIT_SZ_16BIT = 1,
- XMIT_SZ_32BIT = 2,
- XMIT_SZ_64BIT = 7,
- XMIT_SZ_128BIT = 3,
- XMIT_SZ_256BIT = 4,
- XMIT_SZ_512BIT = 5,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT { \
- [XMIT_SZ_8BIT] = 0, \
- [XMIT_SZ_16BIT] = 1, \
- [XMIT_SZ_32BIT] = 2, \
- [XMIT_SZ_64BIT] = 3, \
- [XMIT_SZ_128BIT] = 4, \
- [XMIT_SZ_256BIT] = 5, \
- [XMIT_SZ_512BIT] = 6, \
-}
-
-#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | (((i) & 0xc) << (20 - 2)))
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
-
static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SCIF0_TX,
@@ -604,19 +579,17 @@ static const struct sh_dmae_channel sh73a0_dmae_channels[] = {
DMAE_CHANNEL(0x8980),
};
-static const unsigned int ts_shift[] = TS_SHIFT;
-
static struct sh_dmae_pdata sh73a0_dmae_platform_data = {
.slave = sh73a0_dmae_slaves,
.slave_num = ARRAY_SIZE(sh73a0_dmae_slaves),
.channel = sh73a0_dmae_channels,
.channel_num = ARRAY_SIZE(sh73a0_dmae_channels),
- .ts_low_shift = 3,
- .ts_low_mask = 0x18,
- .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */
- .ts_high_mask = 0x00300000,
- .ts_shift = ts_shift,
- .ts_shift_num = ARRAY_SIZE(ts_shift),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
.dmaor_init = DMAOR_DME,
};
@@ -651,6 +624,116 @@ static struct platform_device dma0_device = {
},
};
+/* MPDMAC */
+static const struct sh_dmae_slave_config sh73a0_mpdma_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_FSI2A_RX,
+ .addr = 0xec230020,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd6, /* CHECK ME */
+ }, {
+ .slave_id = SHDMA_SLAVE_FSI2A_TX,
+ .addr = 0xec230024,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd5, /* CHECK ME */
+ }, {
+ .slave_id = SHDMA_SLAVE_FSI2C_RX,
+ .addr = 0xec230060,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xda, /* CHECK ME */
+ }, {
+ .slave_id = SHDMA_SLAVE_FSI2C_TX,
+ .addr = 0xec230064,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd9, /* CHECK ME */
+ }, {
+ .slave_id = SHDMA_SLAVE_FSI2B_RX,
+ .addr = 0xec240020,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0x8e, /* CHECK ME */
+ }, {
+ .slave_id = SHDMA_SLAVE_FSI2B_TX,
+ .addr = 0xec240024,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0x8d, /* CHECK ME */
+ }, {
+ .slave_id = SHDMA_SLAVE_FSI2D_RX,
+ .addr = 0xec240060,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0x9a, /* CHECK ME */
+ },
+};
+
+#define MPDMA_CHANNEL(a, b, c) \
+{ \
+ .offset = a, \
+ .dmars = b, \
+ .dmars_bit = c, \
+ .chclr_offset = (0x220 - 0x20) + a \
+}
+
+static const struct sh_dmae_channel sh73a0_mpdma_channels[] = {
+ MPDMA_CHANNEL(0x00, 0, 0),
+ MPDMA_CHANNEL(0x10, 0, 8),
+ MPDMA_CHANNEL(0x20, 4, 0),
+ MPDMA_CHANNEL(0x30, 4, 8),
+ MPDMA_CHANNEL(0x50, 8, 0),
+ MPDMA_CHANNEL(0x70, 8, 8),
+};
+
+static struct sh_dmae_pdata sh73a0_mpdma_platform_data = {
+ .slave = sh73a0_mpdma_slaves,
+ .slave_num = ARRAY_SIZE(sh73a0_mpdma_slaves),
+ .channel = sh73a0_mpdma_channels,
+ .channel_num = ARRAY_SIZE(sh73a0_mpdma_channels),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chclr_present = 1,
+};
+
+/* Resource order important! */
+static struct resource sh73a0_mpdma_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xec618020,
+ .end = 0xec61828f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* DMARSx */
+ .start = 0xec619000,
+ .end = 0xec61900b,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "error_irq",
+ .start = gic_spi(181),
+ .end = gic_spi(181),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* IRQ for channels 0-5 */
+ .start = gic_spi(175),
+ .end = gic_spi(180),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mpdma0_device = {
+ .name = "sh-dma-engine",
+ .id = 1,
+ .resource = sh73a0_mpdma_resources,
+ .num_resources = ARRAY_SIZE(sh73a0_mpdma_resources),
+ .dev = {
+ .platform_data = &sh73a0_mpdma_platform_data,
+ },
+};
+
static struct platform_device *sh73a0_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
@@ -673,6 +756,7 @@ static struct platform_device *sh73a0_late_devices[] __initdata = {
&i2c3_device,
&i2c4_device,
&dma0_device,
+ &mpdma0_device,
};
#define SRCR2 0xe61580b0
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index d0de9c1192f7..c0999633a9ab 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -64,7 +64,8 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
&tegra_ehci2_pdata),
OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
&tegra_ehci3_pdata),
- OF_DEV_AUXDATA("nvidia,tegra20-apbdma", 0x6000a000, "tegra-apbdma", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL),
{}
};
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index ee48214bfd89..53bf60f11580 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -33,6 +33,8 @@
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
+#include <mach/iomap.h>
+
#include "board.h"
#include "clock.h"
@@ -48,6 +50,7 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL),
{}
};
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8f421c0ca45c..8674a890fd1c 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -211,24 +211,6 @@ static struct ab8500_platform_data ab8500_platdata = {
.codec = &ab8500_codec_pdata,
};
-static struct resource ab8500_resources[] = {
- [0] = {
- .start = IRQ_DB8500_AB8500,
- .end = IRQ_DB8500_AB8500,
- .flags = IORESOURCE_IRQ
- }
-};
-
-struct platform_device ab8500_device = {
- .name = "ab8500-core",
- .id = 0,
- .dev = {
- .platform_data = &ab8500_platdata,
- },
- .num_resources = 1,
- .resource = ab8500_resources,
-};
-
/*
* TPS61052
*/
@@ -443,7 +425,6 @@ static struct hash_platform_data u8500_hash1_platform_data = {
/* add any platform devices here - TODO */
static struct platform_device *mop500_platform_devs[] __initdata = {
&mop500_gpio_keys_device,
- &ab8500_device,
};
#ifdef CONFIG_STE_DMA40
@@ -605,7 +586,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
&snowball_led_dev,
&snowball_key_dev,
&snowball_sbnet_dev,
- &ab8500_device,
};
static void __init mop500_init_machine(void)
@@ -617,9 +597,8 @@ static void __init mop500_init_machine(void)
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
mop500_pinmaps_init();
- parent = u8500_init_devices();
+ parent = u8500_init_devices(&ab8500_platdata);
- /* FIXME: parent of ab8500 should be prcmu */
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
@@ -652,7 +631,7 @@ static void __init snowball_init_machine(void)
int i;
snowball_pinmaps_init();
- parent = u8500_init_devices();
+ parent = u8500_init_devices(&ab8500_platdata);
for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
snowball_platform_devs[i]->dev.parent = parent;
@@ -684,7 +663,7 @@ static void __init hrefv60_init_machine(void)
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
hrefv60_pinmaps_init();
- parent = u8500_init_devices();
+ parent = u8500_init_devices(&ab8500_platdata);
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
@@ -785,9 +764,6 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
/* only create devices below soc node */
{ .compatible = "stericsson,db8500", },
{ .compatible = "stericsson,db8500-prcmu", },
- { .compatible = "stericsson,db8500-prcmu-regulator", },
- { .compatible = "stericsson,ab8500", },
- { .compatible = "stericsson,ab8500-regulator", },
{ .compatible = "simple-bus"},
{ },
};
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index c8dd94f606dc..db3c52d56ca4 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -16,6 +16,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
@@ -115,7 +116,7 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
return ret;
}
-static struct arm_pmu_platdata db8500_pmu_platdata = {
+struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
};
@@ -206,7 +207,7 @@ static struct device * __init db8500_soc_device_init(void)
/*
* This function is called from the board init
*/
-struct device * __init u8500_init_devices(void)
+struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
{
struct device *parent;
int i;
@@ -223,6 +224,8 @@ struct device * __init u8500_init_devices(void)
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
+ db8500_prcmu_device.dev.platform_data = ab8500;
+
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
return parent;
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 8b7ed82a2866..7914e5eaa9c7 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -13,11 +13,12 @@
#include <asm/mach/time.h>
#include <linux/init.h>
+#include <linux/mfd/abx500/ab8500.h>
void __init ux500_map_io(void);
extern void __init u8500_map_io(void);
-extern struct device * __init u8500_init_devices(void);
+extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500);
extern void __init ux500_init_irq(void);
extern void __init ux500_init_late(void);
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index 54e69973f39b..7ce51767c99c 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -5,5 +5,3 @@ obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
obj-$(CONFIG_MACH_BV07) += bv07.o
obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
-
-obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/mach-vt8500/pwm.c b/arch/arm/mach-vt8500/pwm.c
deleted file mode 100644
index 8ad825e93592..000000000000
--- a/arch/arm/mach-vt8500/pwm.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * arch/arm/mach-vt8500/pwm.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-#include <linux/delay.h>
-
-#include <asm/div64.h>
-
-#define VT8500_NR_PWMS 4
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device {
- struct list_head node;
- struct platform_device *pdev;
-
- const char *label;
-
- void __iomem *regbase;
-
- unsigned int use_count;
- unsigned int pwm_id;
-};
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
-{
- int loops = msecs_to_loops(10);
- while ((readb(reg) & bitmask) && --loops)
- cpu_relax();
-
- if (unlikely(!loops))
- pr_warning("Waiting for status bits 0x%x to clear timed out\n",
- bitmask);
-}
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- unsigned long long c;
- unsigned long period_cycles, prescale, pv, dc;
-
- if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
- return -EINVAL;
-
- c = 25000000/2; /* wild guess --- need to implement clocks */
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- if (period_cycles < 1)
- period_cycles = 1;
- prescale = (period_cycles - 1) / 4096;
- pv = period_cycles / (prescale + 1) - 1;
- if (pv > 4095)
- pv = 4095;
-
- if (prescale > 1023)
- return -EINVAL;
-
- c = (unsigned long long)pv * duty_ns;
- do_div(c, period_ns);
- dc = c;
-
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1));
- writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4));
-
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2));
- writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4));
-
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3));
- writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4));
-
- return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
- writel(5, pwm->regbase + (pwm->pwm_id << 4));
- return 0;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
- writel(0, pwm->regbase + (pwm->pwm_id << 4));
-}
-EXPORT_SYMBOL(pwm_disable);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int found = 0;
-
- mutex_lock(&pwm_lock);
-
- list_for_each_entry(pwm, &pwm_list, node) {
- if (pwm->pwm_id == pwm_id) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- if (pwm->use_count == 0) {
- pwm->use_count++;
- pwm->label = label;
- } else {
- pwm = ERR_PTR(-EBUSY);
- }
- } else {
- pwm = ERR_PTR(-ENOENT);
- }
-
- mutex_unlock(&pwm_lock);
- return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
-
- if (pwm->use_count) {
- pwm->use_count--;
- pwm->label = NULL;
- } else {
- pr_warning("PWM device already freed\n");
- }
-
- mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
- list_add_tail(&pwm->node, &pwm_list);
- mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
- struct pwm_device *pwms;
- struct resource *r;
- int ret = 0;
- int i;
-
- pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL);
- if (pwms == NULL) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
- }
-
- for (i = 0; i < VT8500_NR_PWMS; i++) {
- pwms[i].use_count = 0;
- pwms[i].pwm_id = i;
- pwms[i].pdev = pdev;
- }
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- dev_err(&pdev->dev, "no memory resource defined\n");
- ret = -ENODEV;
- goto err_free;
- }
-
- r = request_mem_region(r->start, resource_size(r), pdev->name);
- if (r == NULL) {
- dev_err(&pdev->dev, "failed to request memory resource\n");
- ret = -EBUSY;
- goto err_free;
- }
-
- pwms[0].regbase = ioremap(r->start, resource_size(r));
- if (pwms[0].regbase == NULL) {
- dev_err(&pdev->dev, "failed to ioremap() registers\n");
- ret = -ENODEV;
- goto err_free_mem;
- }
-
- for (i = 1; i < VT8500_NR_PWMS; i++)
- pwms[i].regbase = pwms[0].regbase;
-
- for (i = 0; i < VT8500_NR_PWMS; i++)
- __add_pwm(&pwms[i]);
-
- platform_set_drvdata(pdev, pwms);
- return 0;
-
-err_free_mem:
- release_mem_region(r->start, resource_size(r));
-err_free:
- kfree(pwms);
- return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
- struct pwm_device *pwms;
- struct resource *r;
- int i;
-
- pwms = platform_get_drvdata(pdev);
- if (pwms == NULL)
- return -ENODEV;
-
- mutex_lock(&pwm_lock);
-
- for (i = 0; i < VT8500_NR_PWMS; i++)
- list_del(&pwms[i].node);
- mutex_unlock(&pwm_lock);
-
- iounmap(pwms[0].regbase);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, resource_size(r));
-
- kfree(pwms);
- return 0;
-}
-
-static struct platform_driver pwm_driver = {
- .driver = {
- .name = "vt8500-pwm",
- .owner = THIS_MODULE,
- },
- .probe = pwm_probe,
- .remove = __devexit_p(pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
- return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
- platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 5cfc98994076..c2cdf6500f75 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -22,6 +22,7 @@
#include <linux/memblock.h>
#include <linux/slab.h>
#include <linux/iommu.h>
+#include <linux/io.h>
#include <linux/vmalloc.h>
#include <linux/sizes.h>
@@ -72,7 +73,7 @@ static dma_addr_t arm_dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
- if (!arch_is_coherent())
+ if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
__dma_page_cpu_to_dev(page, offset, size, dir);
return pfn_to_dma(dev, page_to_pfn(page)) + offset;
}
@@ -95,7 +96,7 @@ static void arm_dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
- if (!arch_is_coherent())
+ if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)),
handle & ~PAGE_MASK, size, dir);
}
@@ -124,6 +125,7 @@ struct dma_map_ops arm_dma_ops = {
.alloc = arm_dma_alloc,
.free = arm_dma_free,
.mmap = arm_dma_mmap,
+ .get_sgtable = arm_dma_get_sgtable,
.map_page = arm_dma_map_page,
.unmap_page = arm_dma_unmap_page,
.map_sg = arm_dma_map_sg,
@@ -217,115 +219,70 @@ static void __dma_free_buffer(struct page *page, size_t size)
}
#ifdef CONFIG_MMU
+#ifdef CONFIG_HUGETLB_PAGE
+#error ARM Coherent DMA allocator does not (yet) support huge TLB
+#endif
-#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT)
-
-/*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
- */
-static pte_t **consistent_pte;
-
-#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
+static void *__alloc_from_contiguous(struct device *dev, size_t size,
+ pgprot_t prot, struct page **ret_page);
-static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp,
+ pgprot_t prot, struct page **ret_page,
+ const void *caller);
-void __init init_consistent_dma_size(unsigned long size)
+static void *
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
+ const void *caller)
{
- unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
+ struct vm_struct *area;
+ unsigned long addr;
- BUG_ON(consistent_pte); /* Check we're called before DMA region init */
- BUG_ON(base < VMALLOC_END);
+ /*
+ * DMA allocation can be mapped to user space, so lets
+ * set VM_USERMAP flags too.
+ */
+ area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP,
+ caller);
+ if (!area)
+ return NULL;
+ addr = (unsigned long)area->addr;
+ area->phys_addr = __pfn_to_phys(page_to_pfn(page));
- /* Grow region to accommodate specified size */
- if (base < consistent_base)
- consistent_base = base;
+ if (ioremap_page_range(addr, addr + size, area->phys_addr, prot)) {
+ vunmap((void *)addr);
+ return NULL;
+ }
+ return (void *)addr;
}
-#include "vmregion.h"
-
-static struct arm_vmregion_head consistent_head = {
- .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
- .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_end = CONSISTENT_END,
-};
-
-#ifdef CONFIG_HUGETLB_PAGE
-#error ARM Coherent DMA allocator does not (yet) support huge TLB
-#endif
-
-/*
- * Initialise the consistent memory allocation.
- */
-static int __init consistent_init(void)
+static void __dma_free_remap(void *cpu_addr, size_t size)
{
- int ret = 0;
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- int i = 0;
- unsigned long base = consistent_base;
- unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
-
- if (IS_ENABLED(CONFIG_CMA) && !IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU))
- return 0;
-
- consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
- if (!consistent_pte) {
- pr_err("%s: no memory\n", __func__);
- return -ENOMEM;
+ unsigned int flags = VM_ARM_DMA_CONSISTENT | VM_USERMAP;
+ struct vm_struct *area = find_vm_area(cpu_addr);
+ if (!area || (area->flags & flags) != flags) {
+ WARN(1, "trying to free invalid coherent area: %p\n", cpu_addr);
+ return;
}
-
- pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
- consistent_head.vm_start = base;
-
- do {
- pgd = pgd_offset(&init_mm, base);
-
- pud = pud_alloc(&init_mm, pgd, base);
- if (!pud) {
- pr_err("%s: no pud tables\n", __func__);
- ret = -ENOMEM;
- break;
- }
-
- pmd = pmd_alloc(&init_mm, pud, base);
- if (!pmd) {
- pr_err("%s: no pmd tables\n", __func__);
- ret = -ENOMEM;
- break;
- }
- WARN_ON(!pmd_none(*pmd));
-
- pte = pte_alloc_kernel(pmd, base);
- if (!pte) {
- pr_err("%s: no pte tables\n", __func__);
- ret = -ENOMEM;
- break;
- }
-
- consistent_pte[i++] = pte;
- base += PMD_SIZE;
- } while (base < CONSISTENT_END);
-
- return ret;
+ unmap_kernel_range((unsigned long)cpu_addr, size);
+ vunmap(cpu_addr);
}
-core_initcall(consistent_init);
-static void *__alloc_from_contiguous(struct device *dev, size_t size,
- pgprot_t prot, struct page **ret_page);
-
-static struct arm_vmregion_head coherent_head = {
- .vm_lock = __SPIN_LOCK_UNLOCKED(&coherent_head.vm_lock),
- .vm_list = LIST_HEAD_INIT(coherent_head.vm_list),
+struct dma_pool {
+ size_t size;
+ spinlock_t lock;
+ unsigned long *bitmap;
+ unsigned long nr_pages;
+ void *vaddr;
+ struct page *page;
};
-static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static struct dma_pool atomic_pool = {
+ .size = SZ_256K,
+};
static int __init early_coherent_pool(char *p)
{
- coherent_pool_size = memparse(p, &p);
+ atomic_pool.size = memparse(p, &p);
return 0;
}
early_param("coherent_pool", early_coherent_pool);
@@ -333,32 +290,45 @@ early_param("coherent_pool", early_coherent_pool);
/*
* Initialise the coherent pool for atomic allocations.
*/
-static int __init coherent_init(void)
+static int __init atomic_pool_init(void)
{
+ struct dma_pool *pool = &atomic_pool;
pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
- size_t size = coherent_pool_size;
+ unsigned long nr_pages = pool->size >> PAGE_SHIFT;
+ unsigned long *bitmap;
struct page *page;
void *ptr;
+ int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long);
- if (!IS_ENABLED(CONFIG_CMA))
- return 0;
+ bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+ if (!bitmap)
+ goto no_bitmap;
- ptr = __alloc_from_contiguous(NULL, size, prot, &page);
+ if (IS_ENABLED(CONFIG_CMA))
+ ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page);
+ else
+ ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
+ &page, NULL);
if (ptr) {
- coherent_head.vm_start = (unsigned long) ptr;
- coherent_head.vm_end = (unsigned long) ptr + size;
- printk(KERN_INFO "DMA: preallocated %u KiB pool for atomic coherent allocations\n",
- (unsigned)size / 1024);
+ spin_lock_init(&pool->lock);
+ pool->vaddr = ptr;
+ pool->page = page;
+ pool->bitmap = bitmap;
+ pool->nr_pages = nr_pages;
+ pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n",
+ (unsigned)pool->size / 1024);
return 0;
}
- printk(KERN_ERR "DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
- (unsigned)size / 1024);
+ kfree(bitmap);
+no_bitmap:
+ pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
+ (unsigned)pool->size / 1024);
return -ENOMEM;
}
/*
* CMA is activated by core_initcall, so we must be called after it.
*/
-postcore_initcall(coherent_init);
+postcore_initcall(atomic_pool_init);
struct dma_contig_early_reserve {
phys_addr_t base;
@@ -406,112 +376,6 @@ void __init dma_contiguous_remap(void)
}
}
-static void *
-__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
- const void *caller)
-{
- struct arm_vmregion *c;
- size_t align;
- int bit;
-
- if (!consistent_pte) {
- pr_err("%s: not initialised\n", __func__);
- dump_stack();
- return NULL;
- }
-
- /*
- * Align the virtual region allocation - maximum alignment is
- * a section size, minimum is a page size. This helps reduce
- * fragmentation of the DMA space, and also prevents allocations
- * smaller than a section from crossing a section boundary.
- */
- bit = fls(size - 1);
- if (bit > SECTION_SHIFT)
- bit = SECTION_SHIFT;
- align = 1 << bit;
-
- /*
- * Allocate a virtual address in the consistent mapping region.
- */
- c = arm_vmregion_alloc(&consistent_head, align, size,
- gfp & ~(__GFP_DMA | __GFP_HIGHMEM), caller);
- if (c) {
- pte_t *pte;
- int idx = CONSISTENT_PTE_INDEX(c->vm_start);
- u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-
- pte = consistent_pte[idx] + off;
- c->priv = page;
-
- do {
- BUG_ON(!pte_none(*pte));
-
- set_pte_ext(pte, mk_pte(page, prot), 0);
- page++;
- pte++;
- off++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- pte = consistent_pte[++idx];
- }
- } while (size -= PAGE_SIZE);
-
- dsb();
-
- return (void *)c->vm_start;
- }
- return NULL;
-}
-
-static void __dma_free_remap(void *cpu_addr, size_t size)
-{
- struct arm_vmregion *c;
- unsigned long addr;
- pte_t *ptep;
- int idx;
- u32 off;
-
- c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
- if (!c) {
- pr_err("%s: trying to free invalid coherent area: %p\n",
- __func__, cpu_addr);
- dump_stack();
- return;
- }
-
- if ((c->vm_end - c->vm_start) != size) {
- pr_err("%s: freeing wrong coherent size (%ld != %d)\n",
- __func__, c->vm_end - c->vm_start, size);
- dump_stack();
- size = c->vm_end - c->vm_start;
- }
-
- idx = CONSISTENT_PTE_INDEX(c->vm_start);
- off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
- ptep = consistent_pte[idx] + off;
- addr = c->vm_start;
- do {
- pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-
- ptep++;
- addr += PAGE_SIZE;
- off++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- ptep = consistent_pte[++idx];
- }
-
- if (pte_none(pte) || !pte_present(pte))
- pr_crit("%s: bad page in kernel page table\n",
- __func__);
- } while (size -= PAGE_SIZE);
-
- flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
- arm_vmregion_free(&consistent_head, c);
-}
-
static int __dma_update_pte(pte_t *pte, pgtable_t token, unsigned long addr,
void *data)
{
@@ -552,16 +416,17 @@ static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp,
return ptr;
}
-static void *__alloc_from_pool(struct device *dev, size_t size,
- struct page **ret_page, const void *caller)
+static void *__alloc_from_pool(size_t size, struct page **ret_page)
{
- struct arm_vmregion *c;
+ struct dma_pool *pool = &atomic_pool;
+ unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+ unsigned int pageno;
+ unsigned long flags;
+ void *ptr = NULL;
size_t align;
- if (!coherent_head.vm_start) {
- printk(KERN_ERR "%s: coherent pool not initialised!\n",
- __func__);
- dump_stack();
+ if (!pool->vaddr) {
+ WARN(1, "coherent pool not initialised!\n");
return NULL;
}
@@ -571,35 +436,41 @@ static void *__alloc_from_pool(struct device *dev, size_t size,
* size. This helps reduce fragmentation of the DMA space.
*/
align = PAGE_SIZE << get_order(size);
- c = arm_vmregion_alloc(&coherent_head, align, size, 0, caller);
- if (c) {
- void *ptr = (void *)c->vm_start;
- struct page *page = virt_to_page(ptr);
- *ret_page = page;
- return ptr;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages,
+ 0, count, (1 << align) - 1);
+ if (pageno < pool->nr_pages) {
+ bitmap_set(pool->bitmap, pageno, count);
+ ptr = pool->vaddr + PAGE_SIZE * pageno;
+ *ret_page = pool->page + pageno;
}
- return NULL;
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ return ptr;
}
-static int __free_from_pool(void *cpu_addr, size_t size)
+static int __free_from_pool(void *start, size_t size)
{
- unsigned long start = (unsigned long)cpu_addr;
- unsigned long end = start + size;
- struct arm_vmregion *c;
+ struct dma_pool *pool = &atomic_pool;
+ unsigned long pageno, count;
+ unsigned long flags;
- if (start < coherent_head.vm_start || end > coherent_head.vm_end)
+ if (start < pool->vaddr || start > pool->vaddr + pool->size)
return 0;
- c = arm_vmregion_find_remove(&coherent_head, (unsigned long)start);
-
- if ((c->vm_end - c->vm_start) != size) {
- printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
- __func__, c->vm_end - c->vm_start, size);
- dump_stack();
- size = c->vm_end - c->vm_start;
+ if (start + size > pool->vaddr + pool->size) {
+ WARN(1, "freeing wrong coherent size from pool\n");
+ return 0;
}
- arm_vmregion_free(&coherent_head, c);
+ pageno = (start - pool->vaddr) >> PAGE_SHIFT;
+ count = size >> PAGE_SHIFT;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ bitmap_clear(pool->bitmap, pageno, count);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
return 1;
}
@@ -644,7 +515,7 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot)
#define __get_dma_pgprot(attrs, prot) __pgprot(0)
#define __alloc_remap_buffer(dev, size, gfp, prot, ret, c) NULL
-#define __alloc_from_pool(dev, size, ret_page, c) NULL
+#define __alloc_from_pool(size, ret_page) NULL
#define __alloc_from_contiguous(dev, size, prot, ret) NULL
#define __free_from_pool(cpu_addr, size) 0
#define __free_from_contiguous(dev, page, size) do { } while (0)
@@ -702,10 +573,10 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
if (arch_is_coherent() || nommu())
addr = __alloc_simple_buffer(dev, size, gfp, &page);
+ else if (gfp & GFP_ATOMIC)
+ addr = __alloc_from_pool(size, &page);
else if (!IS_ENABLED(CONFIG_CMA))
addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
- else if (gfp & GFP_ATOMIC)
- addr = __alloc_from_pool(dev, size, &page, caller);
else
addr = __alloc_from_contiguous(dev, size, prot, &page);
@@ -741,16 +612,22 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
{
int ret = -ENXIO;
#ifdef CONFIG_MMU
+ unsigned long nr_vma_pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+ unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
unsigned long pfn = dma_to_pfn(dev, dma_addr);
+ unsigned long off = vma->vm_pgoff;
+
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
- ret = remap_pfn_range(vma, vma->vm_start,
- pfn + vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
+ if (off < nr_pages && nr_vma_pages <= (nr_pages - off)) {
+ ret = remap_pfn_range(vma, vma->vm_start,
+ pfn + off,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+ }
#endif /* CONFIG_MMU */
return ret;
@@ -785,6 +662,21 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
}
}
+int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t handle, size_t size,
+ struct dma_attrs *attrs)
+{
+ struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
+ int ret;
+
+ ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
+ if (unlikely(ret))
+ return ret;
+
+ sg_set_page(sgt->sgl, page, PAGE_ALIGN(size), 0);
+ return 0;
+}
+
static void dma_cache_maint_page(struct page *page, unsigned long offset,
size_t size, enum dma_data_direction dir,
void (*op)(const void *, size_t, int))
@@ -998,9 +890,6 @@ static int arm_dma_set_mask(struct device *dev, u64 dma_mask)
static int __init dma_debug_do_init(void)
{
-#ifdef CONFIG_MMU
- arm_vmregion_create_proc("dma-mappings", &consistent_head);
-#endif
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
return 0;
}
@@ -1088,7 +977,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t
return pages;
error:
- while (--i)
+ while (i--)
if (pages[i])
__free_pages(pages[i], 0);
if (array_size <= PAGE_SIZE)
@@ -1117,61 +1006,32 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s
* Create a CPU mapping for a specified pages
*/
static void *
-__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot)
+__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot,
+ const void *caller)
{
- struct arm_vmregion *c;
- size_t align;
- size_t count = size >> PAGE_SHIFT;
- int bit;
+ unsigned int i, nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
+ struct vm_struct *area;
+ unsigned long p;
- if (!consistent_pte[0]) {
- pr_err("%s: not initialised\n", __func__);
- dump_stack();
+ area = get_vm_area_caller(size, VM_ARM_DMA_CONSISTENT | VM_USERMAP,
+ caller);
+ if (!area)
return NULL;
- }
-
- /*
- * Align the virtual region allocation - maximum alignment is
- * a section size, minimum is a page size. This helps reduce
- * fragmentation of the DMA space, and also prevents allocations
- * smaller than a section from crossing a section boundary.
- */
- bit = fls(size - 1);
- if (bit > SECTION_SHIFT)
- bit = SECTION_SHIFT;
- align = 1 << bit;
-
- /*
- * Allocate a virtual address in the consistent mapping region.
- */
- c = arm_vmregion_alloc(&consistent_head, align, size,
- gfp & ~(__GFP_DMA | __GFP_HIGHMEM), NULL);
- if (c) {
- pte_t *pte;
- int idx = CONSISTENT_PTE_INDEX(c->vm_start);
- int i = 0;
- u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-
- pte = consistent_pte[idx] + off;
- c->priv = pages;
-
- do {
- BUG_ON(!pte_none(*pte));
-
- set_pte_ext(pte, mk_pte(pages[i], prot), 0);
- pte++;
- off++;
- i++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- pte = consistent_pte[++idx];
- }
- } while (i < count);
- dsb();
+ area->pages = pages;
+ area->nr_pages = nr_pages;
+ p = (unsigned long)area->addr;
- return (void *)c->vm_start;
+ for (i = 0; i < nr_pages; i++) {
+ phys_addr_t phys = __pfn_to_phys(page_to_pfn(pages[i]));
+ if (ioremap_page_range(p, p + PAGE_SIZE, phys, prot))
+ goto err;
+ p += PAGE_SIZE;
}
+ return area->addr;
+err:
+ unmap_kernel_range((unsigned long)area->addr, size);
+ vunmap(area->addr);
return NULL;
}
@@ -1230,6 +1090,19 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si
return 0;
}
+static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
+{
+ struct vm_struct *area;
+
+ if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
+ return cpu_addr;
+
+ area = find_vm_area(cpu_addr);
+ if (area && (area->flags & VM_ARM_DMA_CONSISTENT))
+ return area->pages;
+ return NULL;
+}
+
static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
{
@@ -1248,7 +1121,11 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
if (*handle == DMA_ERROR_CODE)
goto err_buffer;
- addr = __iommu_alloc_remap(pages, size, gfp, prot);
+ if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
+ return pages;
+
+ addr = __iommu_alloc_remap(pages, size, gfp, prot,
+ __builtin_return_address(0));
if (!addr)
goto err_mapping;
@@ -1265,31 +1142,25 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
struct dma_attrs *attrs)
{
- struct arm_vmregion *c;
+ unsigned long uaddr = vma->vm_start;
+ unsigned long usize = vma->vm_end - vma->vm_start;
+ struct page **pages = __iommu_get_pages(cpu_addr, attrs);
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
- c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
-
- if (c) {
- struct page **pages = c->priv;
-
- unsigned long uaddr = vma->vm_start;
- unsigned long usize = vma->vm_end - vma->vm_start;
- int i = 0;
- do {
- int ret;
+ if (!pages)
+ return -ENXIO;
- ret = vm_insert_page(vma, uaddr, pages[i++]);
- if (ret) {
- pr_err("Remapping memory, error: %d\n", ret);
- return ret;
- }
+ do {
+ int ret = vm_insert_page(vma, uaddr, *pages++);
+ if (ret) {
+ pr_err("Remapping memory failed: %d\n", ret);
+ return ret;
+ }
+ uaddr += PAGE_SIZE;
+ usize -= PAGE_SIZE;
+ } while (usize > 0);
- uaddr += PAGE_SIZE;
- usize -= PAGE_SIZE;
- } while (usize > 0);
- }
return 0;
}
@@ -1300,16 +1171,35 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t handle, struct dma_attrs *attrs)
{
- struct arm_vmregion *c;
+ struct page **pages = __iommu_get_pages(cpu_addr, attrs);
size = PAGE_ALIGN(size);
- c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
- if (c) {
- struct page **pages = c->priv;
- __dma_free_remap(cpu_addr, size);
- __iommu_remove_mapping(dev, handle, size);
- __iommu_free_buffer(dev, pages, size);
+ if (!pages) {
+ WARN(1, "trying to free invalid coherent area: %p\n", cpu_addr);
+ return;
}
+
+ if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) {
+ unmap_kernel_range((unsigned long)cpu_addr, size);
+ vunmap(cpu_addr);
+ }
+
+ __iommu_remove_mapping(dev, handle, size);
+ __iommu_free_buffer(dev, pages, size);
+}
+
+static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size, struct dma_attrs *attrs)
+{
+ unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+ struct page **pages = __iommu_get_pages(cpu_addr, attrs);
+
+ if (!pages)
+ return -ENXIO;
+
+ return sg_alloc_table_from_pages(sgt, pages, count, 0, size,
+ GFP_KERNEL);
}
/*
@@ -1317,7 +1207,7 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
*/
static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
size_t size, dma_addr_t *handle,
- enum dma_data_direction dir)
+ enum dma_data_direction dir, struct dma_attrs *attrs)
{
struct dma_iommu_mapping *mapping = dev->archdata.mapping;
dma_addr_t iova, iova_base;
@@ -1336,7 +1226,8 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
phys_addr_t phys = page_to_phys(sg_page(s));
unsigned int len = PAGE_ALIGN(s->offset + s->length);
- if (!arch_is_coherent())
+ if (!arch_is_coherent() &&
+ !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
ret = iommu_map(mapping->domain, iova, phys, len, 0);
@@ -1383,7 +1274,7 @@ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
if (s->offset || (size & ~PAGE_MASK) || size + s->length > max) {
if (__map_sg_chunk(dev, start, size, &dma->dma_address,
- dir) < 0)
+ dir, attrs) < 0)
goto bad_mapping;
dma->dma_address += offset;
@@ -1396,7 +1287,7 @@ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
}
size += s->length;
}
- if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir) < 0)
+ if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir, attrs) < 0)
goto bad_mapping;
dma->dma_address += offset;
@@ -1430,7 +1321,8 @@ void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
if (sg_dma_len(s))
__iommu_remove_mapping(dev, sg_dma_address(s),
sg_dma_len(s));
- if (!arch_is_coherent())
+ if (!arch_is_coherent() &&
+ !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
__dma_page_dev_to_cpu(sg_page(s), s->offset,
s->length, dir);
}
@@ -1492,7 +1384,7 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
dma_addr_t dma_addr;
int ret, len = PAGE_ALIGN(size + offset);
- if (!arch_is_coherent())
+ if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
__dma_page_cpu_to_dev(page, offset, size, dir);
dma_addr = __alloc_iova(mapping, len);
@@ -1531,7 +1423,7 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle,
if (!iova)
return;
- if (!arch_is_coherent())
+ if (!arch_is_coherent() && !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
__dma_page_dev_to_cpu(page, offset, size, dir);
iommu_unmap(mapping->domain, iova, len);
@@ -1571,6 +1463,7 @@ struct dma_map_ops iommu_ops = {
.alloc = arm_iommu_alloc_attrs,
.free = arm_iommu_free_attrs,
.mmap = arm_iommu_mmap_attrs,
+ .get_sgtable = arm_iommu_get_sgtable,
.map_page = arm_iommu_map_page,
.unmap_page = arm_iommu_unmap_page,
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 2e8a1efdf7b8..6776160618ef 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -59,6 +59,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
#define VM_ARM_MTYPE(mt) ((mt) << 20)
#define VM_ARM_MTYPE_MASK (0x1f << 20)
+/* consistent regions used by dma_alloc_attrs() */
+#define VM_ARM_DMA_CONSISTENT 0x20000000
+
#endif
#ifdef CONFIG_ZONE_DMA
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index c722f9ce6918..baf9064c0844 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -47,12 +47,6 @@ config MXC_TZIC
config MXC_AVIC
bool
-config MXC_PWM
- tristate "Enable PWM driver"
- select HAVE_PWM
- help
- Enable support for the i.MX PWM controller(s).
-
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
help
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 63b064b5c1d5..6ac720031150 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_MXC_AVIC) += avic.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
-obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index f302d048392d..af8e484001e5 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -8,5 +8,4 @@ obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
-obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_PXA_SSP) += ssp.o
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
deleted file mode 100644
index ef32686feef9..000000000000
--- a/arch/arm/plat-pxa/pwm.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pwm.c
- *
- * simple driver for PWM (Pulse Width Modulator) controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2008-02-13 initial version
- * eric miao <eric.miao@marvell.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <asm/div64.h>
-
-#define HAS_SECONDARY_PWM 0x10
-#define PWM_ID_BASE(d) ((d) & 0xf)
-
-static const struct platform_device_id pwm_id_table[] = {
- /* PWM has_secondary_pwm? */
- { "pxa25x-pwm", 0 },
- { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
- { "pxa168-pwm", 1 },
- { "pxa910-pwm", 1 },
- { },
-};
-MODULE_DEVICE_TABLE(platform, pwm_id_table);
-
-/* PWM registers and bits definitions */
-#define PWMCR (0x00)
-#define PWMDCR (0x04)
-#define PWMPCR (0x08)
-
-#define PWMCR_SD (1 << 6)
-#define PWMDCR_FD (1 << 10)
-
-struct pwm_device {
- struct list_head node;
- struct pwm_device *secondary;
- struct platform_device *pdev;
-
- const char *label;
- struct clk *clk;
- int clk_enabled;
- void __iomem *mmio_base;
-
- unsigned int use_count;
- unsigned int pwm_id;
-};
-
-/*
- * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
- * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- */
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- unsigned long long c;
- unsigned long period_cycles, prescale, pv, dc;
-
- if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
- return -EINVAL;
-
- c = clk_get_rate(pwm->clk);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- if (period_cycles < 1)
- period_cycles = 1;
- prescale = (period_cycles - 1) / 1024;
- pv = period_cycles / (prescale + 1) - 1;
-
- if (prescale > 63)
- return -EINVAL;
-
- if (duty_ns == period_ns)
- dc = PWMDCR_FD;
- else
- dc = (pv + 1) * duty_ns / period_ns;
-
- /* NOTE: the clock to PWM has to be enabled first
- * before writing to the registers
- */
- clk_enable(pwm->clk);
- __raw_writel(prescale, pwm->mmio_base + PWMCR);
- __raw_writel(dc, pwm->mmio_base + PWMDCR);
- __raw_writel(pv, pwm->mmio_base + PWMPCR);
- clk_disable(pwm->clk);
-
- return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
- int rc = 0;
-
- if (!pwm->clk_enabled) {
- rc = clk_enable(pwm->clk);
- if (!rc)
- pwm->clk_enabled = 1;
- }
- return rc;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- if (pwm->clk_enabled) {
- clk_disable(pwm->clk);
- pwm->clk_enabled = 0;
- }
-}
-EXPORT_SYMBOL(pwm_disable);
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int found = 0;
-
- mutex_lock(&pwm_lock);
-
- list_for_each_entry(pwm, &pwm_list, node) {
- if (pwm->pwm_id == pwm_id) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- if (pwm->use_count == 0) {
- pwm->use_count++;
- pwm->label = label;
- } else
- pwm = ERR_PTR(-EBUSY);
- } else
- pwm = ERR_PTR(-ENOENT);
-
- mutex_unlock(&pwm_lock);
- return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
-
- if (pwm->use_count) {
- pwm->use_count--;
- pwm->label = NULL;
- } else
- pr_warning("PWM device already freed\n");
-
- mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
- list_add_tail(&pwm->node, &pwm_list);
- mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
- const struct platform_device_id *id = platform_get_device_id(pdev);
- struct pwm_device *pwm, *secondary = NULL;
- struct resource *r;
- int ret = 0;
-
- pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (pwm == NULL) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
- }
-
- pwm->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(pwm->clk)) {
- ret = PTR_ERR(pwm->clk);
- goto err_free;
- }
- pwm->clk_enabled = 0;
-
- pwm->use_count = 0;
- pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
- pwm->pdev = pdev;
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- dev_err(&pdev->dev, "no memory resource defined\n");
- ret = -ENODEV;
- goto err_free_clk;
- }
-
- r = request_mem_region(r->start, resource_size(r), pdev->name);
- if (r == NULL) {
- dev_err(&pdev->dev, "failed to request memory resource\n");
- ret = -EBUSY;
- goto err_free_clk;
- }
-
- pwm->mmio_base = ioremap(r->start, resource_size(r));
- if (pwm->mmio_base == NULL) {
- dev_err(&pdev->dev, "failed to ioremap() registers\n");
- ret = -ENODEV;
- goto err_free_mem;
- }
-
- if (id->driver_data & HAS_SECONDARY_PWM) {
- secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (secondary == NULL) {
- ret = -ENOMEM;
- goto err_free_mem;
- }
-
- *secondary = *pwm;
- pwm->secondary = secondary;
-
- /* registers for the second PWM has offset of 0x10 */
- secondary->mmio_base = pwm->mmio_base + 0x10;
- secondary->pwm_id = pdev->id + 2;
- }
-
- __add_pwm(pwm);
- if (secondary)
- __add_pwm(secondary);
-
- platform_set_drvdata(pdev, pwm);
- return 0;
-
-err_free_mem:
- release_mem_region(r->start, resource_size(r));
-err_free_clk:
- clk_put(pwm->clk);
-err_free:
- kfree(pwm);
- return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
- struct pwm_device *pwm;
- struct resource *r;
-
- pwm = platform_get_drvdata(pdev);
- if (pwm == NULL)
- return -ENODEV;
-
- mutex_lock(&pwm_lock);
-
- if (pwm->secondary) {
- list_del(&pwm->secondary->node);
- kfree(pwm->secondary);
- }
-
- list_del(&pwm->node);
- mutex_unlock(&pwm_lock);
-
- iounmap(pwm->mmio_base);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, resource_size(r));
-
- clk_put(pwm->clk);
- kfree(pwm);
- return 0;
-}
-
-static struct platform_driver pwm_driver = {
- .driver = {
- .name = "pxa25x-pwm",
- .owner = THIS_MODULE,
- },
- .probe = pwm_probe,
- .remove = __devexit_p(pwm_remove),
- .id_table = pwm_id_table,
-};
-
-static int __init pwm_init(void)
-{
- return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
- platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index b78717496677..9e40e8d00740 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -59,7 +59,3 @@ obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o
obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index fb9fe00e51a6..f34861920634 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1003,16 +1003,6 @@ config BFIN_GPTIMERS
To compile this driver as a module, choose M here: the module
will be called gptimers.
-config HAVE_PWM
- tristate "Enable PWM API support"
- depends on BFIN_GPTIMERS
- help
- Enable support for the Pulse Width Modulation framework (as
- found in linux/pwm.h).
-
- To compile this driver as a module, choose M here: the module
- will be called pwm.
-
choice
prompt "Uncached DMA region"
default DMA_UNCACHED_1M
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 08e6625106be..735f24e07425 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
CFLAGS_REMOVE_ftrace.o = -pg
-obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
diff --git a/arch/blackfin/kernel/pwm.c b/arch/blackfin/kernel/pwm.c
deleted file mode 100644
index 33f5942733bd..000000000000
--- a/arch/blackfin/kernel/pwm.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Blackfin Pulse Width Modulation (PWM) core
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/pwm.h>
-#include <linux/slab.h>
-
-#include <asm/gptimers.h>
-#include <asm/portmux.h>
-
-struct pwm_device {
- unsigned id;
- unsigned short pin;
-};
-
-static const unsigned short pwm_to_gptimer_per[] = {
- P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5,
- P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11,
-};
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int ret;
-
- /* XXX: pwm_id really should be unsigned */
- if (pwm_id < 0)
- return NULL;
-
- pwm = kzalloc(sizeof(*pwm), GFP_KERNEL);
- if (!pwm)
- return pwm;
-
- pwm->id = pwm_id;
- if (pwm->id >= ARRAY_SIZE(pwm_to_gptimer_per))
- goto err;
-
- pwm->pin = pwm_to_gptimer_per[pwm->id];
- ret = peripheral_request(pwm->pin, label);
- if (ret)
- goto err;
-
- return pwm;
- err:
- kfree(pwm);
- return NULL;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
- peripheral_free(pwm->pin);
- kfree(pwm);
-}
-EXPORT_SYMBOL(pwm_free);
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- unsigned long period, duty;
- unsigned long long val;
-
- if (duty_ns < 0 || duty_ns > period_ns)
- return -EINVAL;
-
- val = (unsigned long long)get_sclk() * period_ns;
- do_div(val, NSEC_PER_SEC);
- period = val;
-
- val = (unsigned long long)period * duty_ns;
- do_div(val, period_ns);
- duty = period - val;
-
- if (duty >= period)
- duty = period - 1;
-
- set_gptimer_config(pwm->id, TIMER_MODE_PWM | TIMER_PERIOD_CNT);
- set_gptimer_pwidth(pwm->id, duty);
- set_gptimer_period(pwm->id, period);
-
- return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
- enable_gptimer(pwm->id);
- return 0;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- disable_gptimer(pwm->id);
-}
-EXPORT_SYMBOL(pwm_disable);
diff --git a/arch/frv/include/asm/cpumask.h b/arch/frv/include/asm/cpumask.h
deleted file mode 100644
index d999c20c84d2..000000000000
--- a/arch/frv/include/asm/cpumask.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_CPUMASK_H
-#define _ASM_CPUMASK_H
-
-#include <asm-generic/cpumask.h>
-
-#endif /* _ASM_CPUMASK_H */
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index 9aa17f1917ea..06906427c0ac 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -7,7 +7,6 @@ header-y += user.h
generic-y += auxvec.h
generic-y += bug.h
generic-y += bugs.h
-generic-y += cpumask.h
generic-y += cputime.h
generic-y += current.h
generic-y += device.h
@@ -23,7 +22,6 @@ generic-y += ioctl.h
generic-y += ioctls.h
generic-y += iomap.h
generic-y += ipcbuf.h
-generic-y += ipc.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += kmap_types.h
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 8186ec5ea151..310cf5781fad 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -126,6 +126,7 @@ config AUDIT_ARCH
menuconfig PARAVIRT_GUEST
bool "Paravirtualized guest support"
+ depends on BROKEN
help
Say Y here to get to see options related to running Linux under
various hypervisors. This option alone does not add any kernel code.
@@ -138,8 +139,6 @@ config PARAVIRT
bool "Enable paravirtualization code"
depends on PARAVIRT_GUEST
default y
- bool
- default y
help
This changes the kernel so it can modify itself when it is run
under a hypervisor, potentially improving performance significantly
diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h
index 7d9116600a36..6e6fe1839f5d 100644
--- a/arch/ia64/include/asm/atomic.h
+++ b/arch/ia64/include/asm/atomic.h
@@ -17,8 +17,8 @@
#include <asm/intrinsics.h>
-#define ATOMIC_INIT(i) ((atomic_t) { (i) })
-#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+#define ATOMIC_INIT(i) { (i) }
+#define ATOMIC64_INIT(i) { (i) }
#define atomic_read(v) (*(volatile int *)&(v)->counter)
#define atomic64_read(v) (*(volatile long *)&(v)->counter)
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
index 367d299d9938..2d1ad4b11a85 100644
--- a/arch/ia64/include/asm/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -120,7 +120,7 @@ extern void machvec_tlb_migrate_finish (struct mm_struct *);
# ifdef MACHVEC_PLATFORM_HEADER
# include MACHVEC_PLATFORM_HEADER
# else
-# define platform_name ia64_mv.name
+# define ia64_platform_name ia64_mv.name
# define platform_setup ia64_mv.setup
# define platform_cpu_init ia64_mv.cpu_init
# define platform_irq_init ia64_mv.irq_init
diff --git a/arch/ia64/include/asm/machvec_dig.h b/arch/ia64/include/asm/machvec_dig.h
index 8a0752f40987..1f7403a2fbee 100644
--- a/arch/ia64/include/asm/machvec_dig.h
+++ b/arch/ia64/include/asm/machvec_dig.h
@@ -10,7 +10,7 @@ extern ia64_mv_setup_t dig_setup;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "dig"
+#define ia64_platform_name "dig"
#define platform_setup dig_setup
#endif /* _ASM_IA64_MACHVEC_DIG_h */
diff --git a/arch/ia64/include/asm/machvec_dig_vtd.h b/arch/ia64/include/asm/machvec_dig_vtd.h
index 6ab1de5c45ef..44308b4c3f6e 100644
--- a/arch/ia64/include/asm/machvec_dig_vtd.h
+++ b/arch/ia64/include/asm/machvec_dig_vtd.h
@@ -11,7 +11,7 @@ extern ia64_mv_dma_init pci_iommu_alloc;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "dig_vtd"
+#define ia64_platform_name "dig_vtd"
#define platform_setup dig_setup
#define platform_dma_init pci_iommu_alloc
diff --git a/arch/ia64/include/asm/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h
index cf72fc87fdfe..e75711279366 100644
--- a/arch/ia64/include/asm/machvec_hpsim.h
+++ b/arch/ia64/include/asm/machvec_hpsim.h
@@ -11,7 +11,7 @@ extern ia64_mv_irq_init_t hpsim_irq_init;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "hpsim"
+#define ia64_platform_name "hpsim"
#define platform_setup hpsim_setup
#define platform_irq_init hpsim_irq_init
diff --git a/arch/ia64/include/asm/machvec_hpzx1.h b/arch/ia64/include/asm/machvec_hpzx1.h
index 3bd83d78a412..c74d3159e9eb 100644
--- a/arch/ia64/include/asm/machvec_hpzx1.h
+++ b/arch/ia64/include/asm/machvec_hpzx1.h
@@ -11,7 +11,7 @@ extern ia64_mv_dma_init sba_dma_init;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "hpzx1"
+#define ia64_platform_name "hpzx1"
#define platform_setup dig_setup
#define platform_dma_init sba_dma_init
diff --git a/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
index 1091ac39740c..906ef6210774 100644
--- a/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
+++ b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
@@ -11,7 +11,7 @@ extern ia64_mv_dma_get_ops hwsw_dma_get_ops;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "hpzx1_swiotlb"
+#define ia64_platform_name "hpzx1_swiotlb"
#define platform_setup dig_setup
#define platform_dma_init machvec_noop
#define platform_dma_get_ops hwsw_dma_get_ops
diff --git a/arch/ia64/include/asm/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h
index f061a30aac42..ece9fa85be88 100644
--- a/arch/ia64/include/asm/machvec_sn2.h
+++ b/arch/ia64/include/asm/machvec_sn2.h
@@ -71,7 +71,7 @@ extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "sn2"
+#define ia64_platform_name "sn2"
#define platform_setup sn_setup
#define platform_cpu_init sn_cpu_init
#define platform_irq_init sn_irq_init
diff --git a/arch/ia64/include/asm/machvec_uv.h b/arch/ia64/include/asm/machvec_uv.h
index 2931447f3813..2c50853f35ac 100644
--- a/arch/ia64/include/asm/machvec_uv.h
+++ b/arch/ia64/include/asm/machvec_uv.h
@@ -20,7 +20,7 @@ extern ia64_mv_setup_t uv_setup;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "uv"
+#define ia64_platform_name "uv"
#define platform_setup uv_setup
#endif /* _ASM_IA64_MACHVEC_UV_H */
diff --git a/arch/ia64/include/asm/machvec_xen.h b/arch/ia64/include/asm/machvec_xen.h
index 55f9228056cd..8b8bd0eb3923 100644
--- a/arch/ia64/include/asm/machvec_xen.h
+++ b/arch/ia64/include/asm/machvec_xen.h
@@ -13,7 +13,7 @@ extern ia64_mv_send_ipi_t xen_platform_send_ipi;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "xen"
+#define ia64_platform_name "xen"
#define platform_setup dig_setup
#define platform_cpu_init xen_cpu_init
#define platform_irq_init xen_irq_init
diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h
index 832dd3789e9d..944152a50912 100644
--- a/arch/ia64/include/asm/processor.h
+++ b/arch/ia64/include/asm/processor.h
@@ -719,7 +719,7 @@ enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_FORCE_MWAIT,
void default_idle(void);
-#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
+#define ia64_platform_is(x) (strcmp(x, ia64_platform_name) == 0)
#endif /* !__ASSEMBLY__ */
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index df5351e3eed7..e7947528aee6 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -23,6 +23,7 @@ config KVM
depends on HAVE_KVM && MODULES && EXPERIMENTAL
# for device assignment:
depends on PCI
+ depends on BROKEN
select PREEMPT_NOTIFIERS
select ANON_INODES
select HAVE_KVM_IRQCHIP
diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c
index f5959c0c1810..eab28e314022 100644
--- a/arch/ia64/pci/fixup.c
+++ b/arch/ia64/pci/fixup.c
@@ -30,8 +30,8 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
struct pci_bus *bus;
u16 config;
- if ((strcmp(platform_name, "dig") != 0)
- && (strcmp(platform_name, "hpzx1") != 0))
+ if ((strcmp(ia64_platform_name, "dig") != 0)
+ && (strcmp(ia64_platform_name, "hpzx1") != 0))
return;
/* Maybe, this machine supports legacy memory map. */
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 5ce8029f558b..d64786d5e2f3 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -14,6 +14,7 @@ platforms += jz4740
platforms += lantiq
platforms += lasat
platforms += loongson
+platforms += loongson1
platforms += mipssim
platforms += mti-malta
platforms += netlogic
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2d56cd5af336..e3efc06e6409 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -211,6 +211,7 @@ config MACH_JZ4740
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_ZBOOT_UART16550
select DMA_NONCOHERENT
select IRQ_CPU
select GENERIC_GPIO
@@ -266,6 +267,16 @@ config MACH_LOONGSON
Chinese Academy of Sciences (CAS) in the People's Republic
of China. The chief architect is Professor Weiwu Hu.
+config MACH_LOONGSON1
+ bool "Loongson 1 family of machines"
+ select SYS_SUPPORTS_ZBOOT
+ help
+ This enables support for the Loongson 1 based machines.
+
+ Loongson 1 is a family of 32-bit MIPS-compatible SoCs developed by
+ the ICT (Institute of Computing Technology) and the Chinese Academy
+ of Sciences.
+
config MIPS_MALTA
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
@@ -789,6 +800,8 @@ config NLM_XLR_BOARD
select ZONE_DMA if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
+ select USB_ARCH_HAS_OHCI if USB_SUPPORT
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
help
Support for systems based on Netlogic XLR and XLS processors.
Say Y here if you have a XLR or XLS based board.
@@ -801,7 +814,6 @@ config NLM_XLP_BOARD
select SYS_HAS_CPU_XLP
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
- select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select 64BIT_PHYS_ADDR
@@ -838,6 +850,7 @@ source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
source "arch/mips/loongson/Kconfig"
+source "arch/mips/loongson1/Kconfig"
source "arch/mips/netlogic/Kconfig"
endmenu
@@ -1219,6 +1232,14 @@ config CPU_LOONGSON2F
have a similar programming interface with FPGA northbridge used in
Loongson2E.
+config CPU_LOONGSON1B
+ bool "Loongson 1B"
+ depends on SYS_HAS_CPU_LOONGSON1B
+ select CPU_LOONGSON1
+ help
+ The Loongson 1B is a 32-bit SoC, which implements the MIPS32
+ release 2 instruction set.
+
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
@@ -1434,6 +1455,8 @@ config CPU_CAVIUM_OCTEON
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
+ select LIBFDT
+ select USE_OF
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
@@ -1546,6 +1569,14 @@ config CPU_LOONGSON2
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+config CPU_LOONGSON1
+ bool
+ select CPU_MIPS32
+ select CPU_MIPSR2
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
config CPU_BMIPS
bool
select CPU_MIPS32
@@ -1564,6 +1595,9 @@ config SYS_HAS_CPU_LOONGSON2F
select CPU_SUPPORTS_ADDRWINCFG if 64BIT
select CPU_SUPPORTS_UNCACHED_ACCELERATED
+config SYS_HAS_CPU_LOONGSON1B
+ bool
+
config SYS_HAS_CPU_MIPS32_R1
bool
@@ -2368,6 +2402,8 @@ config PCI_DOMAINS
source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
#
# ISA support is now enabled via select. Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 295f1a95f745..99969484c475 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -81,10 +81,10 @@ static void mtx1_power_off(void)
void __init board_setup(void)
{
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
/* Enable USB power switch */
alchemy_gpio_direction_output(204, 0);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+#endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */
/* Initialize sys_pinfunc */
au_writel(SYS_PF_NI2, SYS_PINFUNC);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 95cb9113b12c..c0f3ce6dcb56 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -334,13 +334,12 @@ static void __init alchemy_setup_macs(int ctype)
if (alchemy_get_macs(ctype) < 1)
return;
- macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ macres = kmemdup(au1xxx_eth0_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
if (!macres) {
printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
return;
}
- memcpy(macres, au1xxx_eth0_resources[ctype],
- sizeof(struct resource) * MAC_RES_COUNT);
au1xxx_eth0_device.resource = macres;
i = prom_get_ethernet_addr(ethaddr);
@@ -356,13 +355,12 @@ static void __init alchemy_setup_macs(int ctype)
if (alchemy_get_macs(ctype) < 2)
return;
- macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ macres = kmemdup(au1xxx_eth1_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
if (!macres) {
printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
return;
}
- memcpy(macres, au1xxx_eth1_resources[ctype],
- sizeof(struct resource) * MAC_RES_COUNT);
au1xxx_eth1_device.resource = macres;
ethaddr[5] += 1; /* next addr for 2nd MAC */
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index 3c37fb303364..c9e747dd9fc2 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -2,7 +2,7 @@
# Alchemy Develboards
#
-obj-y += prom.o bcsr.o platform.o
+obj-y += bcsr.o platform.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MIPS_PB1100) += pb1100.o
obj-$(CONFIG_MIPS_PB1500) += pb1500.o
diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c
index 1e83ce2e1147..f2039ef2c293 100644
--- a/arch/mips/alchemy/devboards/bcsr.c
+++ b/arch/mips/alchemy/devboards/bcsr.c
@@ -90,10 +90,7 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
disable_irq_nosync(irq);
-
- for ( ; bisr; bisr &= bisr - 1)
- generic_handle_irq(bcsr_csc_base + __ffs(bisr));
-
+ generic_handle_irq(bcsr_csc_base + __ffs(bisr));
enable_irq(irq);
}
diff --git a/arch/mips/alchemy/devboards/pb1100.c b/arch/mips/alchemy/devboards/pb1100.c
index cff50d05ddd4..78c77a44a317 100644
--- a/arch/mips/alchemy/devboards/pb1100.c
+++ b/arch/mips/alchemy/devboards/pb1100.c
@@ -46,7 +46,7 @@ void __init board_setup(void)
alchemy_gpio1_input_enable();
udelay(100);
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
{
u32 pin_func, sys_freqctrl, sys_clksrc;
@@ -93,7 +93,7 @@ void __init board_setup(void)
pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
}
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+#endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
diff --git a/arch/mips/alchemy/devboards/pb1500.c b/arch/mips/alchemy/devboards/pb1500.c
index e7b807b3ec51..232fee942000 100644
--- a/arch/mips/alchemy/devboards/pb1500.c
+++ b/arch/mips/alchemy/devboards/pb1500.c
@@ -53,7 +53,7 @@ void __init board_setup(void)
alchemy_gpio_direction_input(201);
alchemy_gpio_direction_input(203);
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
/* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
@@ -87,7 +87,7 @@ void __init board_setup(void)
/* 2nd USB port is USB host */
pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+#endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */
#ifdef CONFIG_PCI
{
diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c
index 621f70afb63a..f39042e99d0d 100644
--- a/arch/mips/alchemy/devboards/platform.c
+++ b/arch/mips/alchemy/devboards/platform.c
@@ -10,9 +10,39 @@
#include <linux/platform_device.h>
#include <linux/pm.h>
+#include <asm/bootinfo.h>
#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
+#include <prom.h>
+
+void __init prom_init(void)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
+ memsize = 64 << 20; /* all devboards have at least 64MB RAM */
+
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+#ifdef CONFIG_MIPS_DB1300
+ alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
+#else
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+#endif
+}
+
static struct platform_device db1x00_rtc_dev = {
.name = "rtc-au1xxx",
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
deleted file mode 100644
index 93a22107cc41..000000000000
--- a/arch/mips/alchemy/devboards/prom.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Common code used by all Alchemy develboards.
- *
- * Extracted from files which had this to say:
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <prom.h>
-
-#if defined(CONFIG_MIPS_DB1000) || \
- defined(CONFIG_MIPS_PB1100) || \
- defined(CONFIG_MIPS_PB1500)
-#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x04000000
-
-#else /* Au1550/Au1200-based develboards */
-#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x08000000
-#endif
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = (int)fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
- memsize_str = prom_getenv("memsize");
- if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
- memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
-
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
-#ifdef CONFIG_MIPS_DB1300
- alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
-#else
- alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-#endif
-}
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index 6b1b9ad8d857..d03e8799d1cf 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -1,6 +1,10 @@
menu "CPU support"
depends on BCM63XX
+config BCM63XX_CPU_6328
+ bool "support 6328 CPU"
+ select HW_HAS_PCI
+
config BCM63XX_CPU_6338
bool "support 6338 CPU"
select HW_HAS_PCI
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index 6dfdc69928ac..833af72c852a 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,5 +1,6 @@
obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
+ dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
+ dev-spi.o dev-uart.o dev-wdt.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 2f1773f3fb7a..feb05258a4d1 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -11,9 +11,6 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
#include <linux/ssb/ssb.h>
#include <asm/addrspace.h>
#include <bcm63xx_board.h>
@@ -24,7 +21,9 @@
#include <bcm63xx_dev_pci.h>
#include <bcm63xx_dev_enet.h>
#include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_flash.h>
#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_dev_spi.h>
#include <board_bcm963xx.h>
#define PFX "board_bcm963xx: "
@@ -34,6 +33,48 @@ static unsigned int mac_addr_used;
static struct board_info board;
/*
+ * known 6328 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6328
+static struct board_info __initdata board_96328avng = {
+ .name = "96328avng",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+
+ .leds = {
+ {
+ .name = "96328avng::ppp-fail",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "96328avng::power",
+ .gpio = 4,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "96328avng::power-fail",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "96328avng::wps",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "96328avng::ppp",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+};
+#endif
+
+/*
* known 6338 boards
*/
#ifdef CONFIG_BCM63XX_CPU_6338
@@ -592,6 +633,9 @@ static struct board_info __initdata board_DWVS0 = {
* all boards
*/
static const struct board_info __initdata *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_6328
+ &board_96328avng,
+#endif
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,
&board_96338w,
@@ -709,9 +753,15 @@ void __init board_prom_init(void)
char cfe_version[32];
u32 val;
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
+ /* read base address of boot chip select (0)
+ * 6328 does not have MPI but boots from a fixed address
+ */
+ if (BCMCPU_IS_6328())
+ val = 0x18000000;
+ else {
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+ }
boot_addr = (u8 *)KSEG1ADDR(val);
/* dump cfe version */
@@ -808,40 +858,6 @@ void __init board_setup(void)
panic("unexpected CPU for bcm963xx board");
}
-static struct mtd_partition mtd_partitions[] = {
- {
- .name = "cfe",
- .offset = 0x0,
- .size = 0x40000,
- }
-};
-
-static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-
-static struct physmap_flash_data flash_data = {
- .width = 2,
- .nr_parts = ARRAY_SIZE(mtd_partitions),
- .parts = mtd_partitions,
- .part_probe_types = bcm63xx_part_types,
-};
-
-static struct resource mtd_resources[] = {
- {
- .start = 0, /* filled at runtime */
- .end = 0, /* filled at runtime */
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device mtd_dev = {
- .name = "physmap-flash",
- .resource = mtd_resources,
- .num_resources = ARRAY_SIZE(mtd_resources),
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
static struct gpio_led_platform_data bcm63xx_led_data;
static struct platform_device bcm63xx_gpio_leds = {
@@ -855,8 +871,6 @@ static struct platform_device bcm63xx_gpio_leds = {
*/
int __init board_register_devices(void)
{
- u32 val;
-
if (board.has_uart0)
bcm63xx_uart_register(0);
@@ -890,14 +904,9 @@ int __init board_register_devices(void)
}
#endif
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
-
- mtd_resources[0].start = val;
- mtd_resources[0].end = 0x1FFFFFFF;
+ bcm63xx_spi_register();
- platform_device_register(&mtd_dev);
+ bcm63xx_flash_register();
bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
bcm63xx_led_data.leds = board.leds;
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 9d57c71b7b58..1db48adb543a 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -120,7 +120,7 @@ static void enetsw_set(struct clk *clk, int enable)
{
if (!BCMCPU_IS_6368())
return;
- bcm_hwclock_set(CKCTL_6368_ROBOSW_CLK_EN |
+ bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
CKCTL_6368_SWPKT_USB_EN |
CKCTL_6368_SWPKT_SAR_EN, enable);
if (enable) {
@@ -163,7 +163,7 @@ static void usbh_set(struct clk *clk, int enable)
if (BCMCPU_IS_6348())
bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
else if (BCMCPU_IS_6368())
- bcm_hwclock_set(CKCTL_6368_USBH_CLK_EN, enable);
+ bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
}
static struct clk clk_usbh = {
@@ -181,9 +181,11 @@ static void spi_set(struct clk *clk, int enable)
mask = CKCTL_6338_SPI_EN;
else if (BCMCPU_IS_6348())
mask = CKCTL_6348_SPI_EN;
- else
- /* BCMCPU_IS_6358 */
+ else if (BCMCPU_IS_6358())
mask = CKCTL_6358_SPI_EN;
+ else
+ /* BCMCPU_IS_6368 */
+ mask = CKCTL_6368_SPI_EN;
bcm_hwclock_set(mask, enable);
}
@@ -199,7 +201,7 @@ static void xtm_set(struct clk *clk, int enable)
if (!BCMCPU_IS_6368())
return;
- bcm_hwclock_set(CKCTL_6368_SAR_CLK_EN |
+ bcm_hwclock_set(CKCTL_6368_SAR_EN |
CKCTL_6368_SWPKT_SAR_EN, enable);
if (enable) {
@@ -222,6 +224,18 @@ static struct clk clk_xtm = {
};
/*
+ * IPsec clock
+ */
+static void ipsec_set(struct clk *clk, int enable)
+{
+ bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable);
+}
+
+static struct clk clk_ipsec = {
+ .set = ipsec_set,
+};
+
+/*
* Internal peripheral clock
*/
static struct clk clk_periph = {
@@ -278,6 +292,8 @@ struct clk *clk_get(struct device *dev, const char *id)
return &clk_periph;
if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
return &clk_pcm;
+ if (BCMCPU_IS_6368() && !strcmp(id, "ipsec"))
+ return &clk_ipsec;
return ERR_PTR(-ENOENT);
}
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 8f0d6c7725ea..a7afb289b15a 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -29,6 +29,14 @@ static u16 bcm63xx_cpu_rev;
static unsigned int bcm63xx_cpu_freq;
static unsigned int bcm63xx_memory_size;
+static const unsigned long bcm6328_regs_base[] = {
+ __GEN_CPU_REGS_TABLE(6328)
+};
+
+static const int bcm6328_irqs[] = {
+ __GEN_CPU_IRQ_TABLE(6328)
+};
+
static const unsigned long bcm6338_regs_base[] = {
__GEN_CPU_REGS_TABLE(6338)
};
@@ -99,6 +107,33 @@ unsigned int bcm63xx_get_memory_size(void)
static unsigned int detect_cpu_clock(void)
{
switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ {
+ unsigned int tmp, mips_pll_fcvo;
+
+ tmp = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+ mips_pll_fcvo = (tmp & STRAPBUS_6328_FCVO_MASK)
+ >> STRAPBUS_6328_FCVO_SHIFT;
+
+ switch (mips_pll_fcvo) {
+ case 0x12:
+ case 0x14:
+ case 0x19:
+ return 160000000;
+ case 0x1c:
+ return 192000000;
+ case 0x13:
+ case 0x15:
+ return 200000000;
+ case 0x1a:
+ return 384000000;
+ case 0x16:
+ return 400000000;
+ default:
+ return 320000000;
+ }
+
+ }
case BCM6338_CPU_ID:
/* BCM6338 has a fixed 240 Mhz frequency */
return 240000000;
@@ -170,6 +205,9 @@ static unsigned int detect_memory_size(void)
unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
u32 val;
+ if (BCMCPU_IS_6328())
+ return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+
if (BCMCPU_IS_6345()) {
val = bcm_sdram_readl(SDRAM_MBASE_REG);
return (val * 8 * 1024 * 1024);
@@ -228,17 +266,26 @@ void __init bcm63xx_cpu_init(void)
bcm63xx_irqs = bcm6345_irqs;
break;
case CPU_BMIPS4350:
- switch (read_c0_prid() & 0xf0) {
- case 0x10:
+ if ((read_c0_prid() & 0xf0) == 0x10) {
expected_cpu_id = BCM6358_CPU_ID;
bcm63xx_regs_base = bcm6358_regs_base;
bcm63xx_irqs = bcm6358_irqs;
- break;
- case 0x30:
- expected_cpu_id = BCM6368_CPU_ID;
- bcm63xx_regs_base = bcm6368_regs_base;
- bcm63xx_irqs = bcm6368_irqs;
- break;
+ } else {
+ /* all newer chips have the same chip id location */
+ u16 chip_id = bcm_readw(BCM_6368_PERF_BASE);
+
+ switch (chip_id) {
+ case BCM6328_CPU_ID:
+ expected_cpu_id = BCM6328_CPU_ID;
+ bcm63xx_regs_base = bcm6328_regs_base;
+ bcm63xx_irqs = bcm6328_irqs;
+ break;
+ case BCM6368_CPU_ID:
+ expected_cpu_id = BCM6368_CPU_ID;
+ bcm63xx_regs_base = bcm6368_regs_base;
+ bcm63xx_irqs = bcm6368_irqs;
+ break;
+ }
}
break;
}
diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c
index da46d1d3c77c..5bb5b154c9bd 100644
--- a/arch/mips/bcm63xx/dev-dsp.c
+++ b/arch/mips/bcm63xx/dev-dsp.c
@@ -31,7 +31,7 @@ static struct resource voip_dsp_resources[] = {
static struct platform_device bcm63xx_voip_dsp_device = {
.name = "bcm63xx-voip-dsp",
- .id = 0,
+ .id = -1,
.num_resources = ARRAY_SIZE(voip_dsp_resources),
.resource = voip_dsp_resources,
};
diff --git a/arch/mips/bcm63xx/dev-flash.c b/arch/mips/bcm63xx/dev-flash.c
new file mode 100644
index 000000000000..58371c7deac2
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-flash.c
@@ -0,0 +1,123 @@
+/*
+ * Broadcom BCM63xx flash registration
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_flash.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+static struct mtd_partition mtd_partitions[] = {
+ {
+ .name = "cfe",
+ .offset = 0x0,
+ .size = 0x40000,
+ }
+};
+
+static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+ .parts = mtd_partitions,
+ .part_probe_types = bcm63xx_part_types,
+};
+
+static struct resource mtd_resources[] = {
+ {
+ .start = 0, /* filled at runtime */
+ .end = 0, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device mtd_dev = {
+ .name = "physmap-flash",
+ .resource = mtd_resources,
+ .num_resources = ARRAY_SIZE(mtd_resources),
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static int __init bcm63xx_detect_flash_type(void)
+{
+ u32 val;
+
+ switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+ if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+ return BCM63XX_FLASH_TYPE_SERIAL;
+ else
+ return BCM63XX_FLASH_TYPE_NAND;
+ case BCM6338_CPU_ID:
+ case BCM6345_CPU_ID:
+ case BCM6348_CPU_ID:
+ /* no way to auto detect so assume parallel */
+ return BCM63XX_FLASH_TYPE_PARALLEL;
+ case BCM6358_CPU_ID:
+ val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+ if (val & STRAPBUS_6358_BOOT_SEL_PARALLEL)
+ return BCM63XX_FLASH_TYPE_PARALLEL;
+ else
+ return BCM63XX_FLASH_TYPE_SERIAL;
+ case BCM6368_CPU_ID:
+ val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+ switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
+ case STRAPBUS_6368_BOOT_SEL_NAND:
+ return BCM63XX_FLASH_TYPE_NAND;
+ case STRAPBUS_6368_BOOT_SEL_SERIAL:
+ return BCM63XX_FLASH_TYPE_SERIAL;
+ case STRAPBUS_6368_BOOT_SEL_PARALLEL:
+ return BCM63XX_FLASH_TYPE_PARALLEL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+int __init bcm63xx_flash_register(void)
+{
+ int flash_type;
+ u32 val;
+
+ flash_type = bcm63xx_detect_flash_type();
+
+ switch (flash_type) {
+ case BCM63XX_FLASH_TYPE_PARALLEL:
+ /* read base address of boot chip select (0) */
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+
+ mtd_resources[0].start = val;
+ mtd_resources[0].end = 0x1FFFFFFF;
+
+ return platform_device_register(&mtd_dev);
+ case BCM63XX_FLASH_TYPE_SERIAL:
+ pr_warn("unsupported serial flash detected\n");
+ return -ENODEV;
+ case BCM63XX_FLASH_TYPE_NAND:
+ pr_warn("unsupported NAND flash detected\n");
+ return -ENODEV;
+ default:
+ pr_err("flash detection failed for BCM%x: %d\n",
+ bcm63xx_get_cpu_id(), flash_type);
+ return -ENODEV;
+ }
+}
diff --git a/arch/mips/bcm63xx/dev-rng.c b/arch/mips/bcm63xx/dev-rng.c
new file mode 100644
index 000000000000..d277b4dc6c68
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-rng.c
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+
+static struct resource rng_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bcm63xx_rng_device = {
+ .name = "bcm63xx-rng",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rng_resources),
+ .resource = rng_resources,
+};
+
+int __init bcm63xx_rng_register(void)
+{
+ if (!BCMCPU_IS_6368())
+ return -ENODEV;
+
+ rng_resources[0].start = bcm63xx_regset_address(RSET_RNG);
+ rng_resources[0].end = rng_resources[0].start;
+ rng_resources[0].end += RSET_RNG_SIZE - 1;
+
+ return platform_device_register(&bcm63xx_rng_device);
+}
+arch_initcall(bcm63xx_rng_register);
diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c
new file mode 100644
index 000000000000..e39f73048d4f
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-spi.c
@@ -0,0 +1,119 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_spi.h>
+#include <bcm63xx_regs.h>
+
+#ifdef BCMCPU_RUNTIME_DETECT
+/*
+ * register offsets
+ */
+static const unsigned long bcm6338_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6338)
+};
+
+static const unsigned long bcm6348_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6348)
+};
+
+static const unsigned long bcm6358_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6358)
+};
+
+static const unsigned long bcm6368_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6368)
+};
+
+const unsigned long *bcm63xx_regs_spi;
+EXPORT_SYMBOL(bcm63xx_regs_spi);
+
+static __init void bcm63xx_spi_regs_init(void)
+{
+ if (BCMCPU_IS_6338())
+ bcm63xx_regs_spi = bcm6338_regs_spi;
+ if (BCMCPU_IS_6348())
+ bcm63xx_regs_spi = bcm6348_regs_spi;
+ if (BCMCPU_IS_6358())
+ bcm63xx_regs_spi = bcm6358_regs_spi;
+ if (BCMCPU_IS_6368())
+ bcm63xx_regs_spi = bcm6368_regs_spi;
+}
+#else
+static __init void bcm63xx_spi_regs_init(void) { }
+#endif
+
+static struct resource spi_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = -1, /* filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct bcm63xx_spi_pdata spi_pdata = {
+ .bus_num = 0,
+ .num_chipselect = 8,
+};
+
+static struct platform_device bcm63xx_spi_device = {
+ .name = "bcm63xx-spi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(spi_resources),
+ .resource = spi_resources,
+ .dev = {
+ .platform_data = &spi_pdata,
+ },
+};
+
+int __init bcm63xx_spi_register(void)
+{
+ struct clk *periph_clk;
+
+ if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
+ return -ENODEV;
+
+ periph_clk = clk_get(NULL, "periph");
+ if (IS_ERR(periph_clk)) {
+ pr_err("unable to get periph clock\n");
+ return -ENODEV;
+ }
+
+ /* Set bus frequency */
+ spi_pdata.speed_hz = clk_get_rate(periph_clk);
+
+ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+ spi_resources[0].end = spi_resources[0].start;
+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
+
+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+ spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
+ spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
+ }
+
+ if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
+ spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+ spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+ }
+
+ bcm63xx_spi_regs_init();
+
+ return platform_device_register(&bcm63xx_spi_device);
+}
diff --git a/arch/mips/bcm63xx/dev-wdt.c b/arch/mips/bcm63xx/dev-wdt.c
index 3e6c716a4c11..2a2346a99bcb 100644
--- a/arch/mips/bcm63xx/dev-wdt.c
+++ b/arch/mips/bcm63xx/dev-wdt.c
@@ -21,7 +21,7 @@ static struct resource wdt_resources[] = {
static struct platform_device bcm63xx_wdt_device = {
.name = "bcm63xx-wdt",
- .id = 0,
+ .id = -1,
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index 9a216a451d92..18e051ad18a5 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -27,6 +27,17 @@ static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
#ifndef BCMCPU_RUNTIME_DETECT
+#ifdef CONFIG_BCM63XX_CPU_6328
+#define irq_stat_reg PERF_IRQSTAT_6328_REG
+#define irq_mask_reg PERF_IRQMASK_6328_REG
+#define irq_bits 64
+#define is_ext_irq_cascaded 1
+#define ext_irq_start (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+#define ext_irq_end (BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+#define ext_irq_count 4
+#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6328
+#define ext_irq_cfg_reg2 0
+#endif
#ifdef CONFIG_BCM63XX_CPU_6338
#define irq_stat_reg PERF_IRQSTAT_6338_REG
#define irq_mask_reg PERF_IRQMASK_6338_REG
@@ -118,6 +129,16 @@ static void bcm63xx_init_irq(void)
irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ irq_stat_addr += PERF_IRQSTAT_6328_REG;
+ irq_mask_addr += PERF_IRQMASK_6328_REG;
+ irq_bits = 64;
+ ext_irq_count = 4;
+ is_ext_irq_cascaded = 1;
+ ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+ ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
+ break;
case BCM6338_CPU_ID:
irq_stat_addr += PERF_IRQSTAT_6338_REG;
irq_mask_addr += PERF_IRQMASK_6338_REG;
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
index 99d7f405cbeb..10eaff458071 100644
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -26,7 +26,9 @@ void __init prom_init(void)
bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
/* disable all hardware blocks clock for now */
- if (BCMCPU_IS_6338())
+ if (BCMCPU_IS_6328())
+ mask = CKCTL_6328_ALL_SAFE_EN;
+ else if (BCMCPU_IS_6338())
mask = CKCTL_6338_ALL_SAFE_EN;
else if (BCMCPU_IS_6345())
mask = CKCTL_6345_ALL_SAFE_EN;
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 356b05583e14..0e74a13639cd 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -68,6 +68,9 @@ void bcm63xx_machine_reboot(void)
/* mask and clear all external irq */
switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
+ break;
case BCM6338_CPU_ID:
perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
break;
@@ -95,9 +98,13 @@ void bcm63xx_machine_reboot(void)
bcm6348_a1_reboot();
printk(KERN_INFO "triggering watchdog soft-reset...\n");
- reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
- reg |= SYS_PLL_SOFT_RESET;
- bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
+ if (BCMCPU_IS_6328()) {
+ bcm_wdt_writel(1, WDT_SOFTRESET_REG);
+ } else {
+ reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+ reg |= SYS_PLL_SOFT_RESET;
+ bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
+ }
while (1)
;
}
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 5042d51b0512..c2a3fb0ffc87 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -58,8 +58,12 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
# Calculate the load address of the compressed kernel image
hostprogs-y := calc_vmlinuz_load_addr
+ifeq ($(CONFIG_MACH_JZ4740),y)
+VMLINUZ_LOAD_ADDRESS := 0x80600000
+else
VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
+endif
vmlinuzobjs-y += $(obj)/piggy.o
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
index c9caaf4fbf60..1c7b739b6a1d 100644
--- a/arch/mips/boot/compressed/uart-16550.c
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -18,6 +18,11 @@
#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
#endif
+#ifdef CONFIG_MACH_JZ4740
+#define UART0_BASE 0xB0030000
+#define PORT(offset) (UART0_BASE + (4 * offset))
+#endif
+
#ifndef PORT
#error please define the serial port address for your own machine
#endif
diff --git a/arch/mips/cavium-octeon/.gitignore b/arch/mips/cavium-octeon/.gitignore
new file mode 100644
index 000000000000..39c968605ff6
--- /dev/null
+++ b/arch/mips/cavium-octeon/.gitignore
@@ -0,0 +1,2 @@
+*.dtb.S
+*.dtb
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 19eb0434269f..bc96e2908f14 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -9,9 +9,25 @@
# Copyright (C) 2005-2009 Cavium Networks
#
+CFLAGS_octeon-platform.o = -I$(src)/../../../scripts/dtc/libfdt
+CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
+
obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
obj-y += dma-octeon.o flash_setup.o
obj-y += octeon-memcpy.o
obj-y += executive/
obj-$(CONFIG_SMP) += smp.o
+
+DTS_FILES = octeon_3xxx.dts octeon_68xx.dts
+DTB_FILES = $(patsubst %.dts, %.dtb, $(DTS_FILES))
+
+obj-y += $(patsubst %.dts, %.dtb.o, $(DTS_FILES))
+
+$(obj)/%.dtb: $(src)/%.dts FORCE
+ $(call if_changed_dep,dtc)
+
+# Let's keep the .dtb files around in case we want to look at them.
+.SECONDARY: $(addprefix $(obj)/, $(DTB_FILES))
+
+clean-files += $(DTB_FILES) $(patsubst %.dtb, %.dtb.S, $(DTB_FILES))
diff --git a/arch/mips/cavium-octeon/executive/cvmx-fpa.c b/arch/mips/cavium-octeon/executive/cvmx-fpa.c
deleted file mode 100644
index ad44b8bd8057..000000000000
--- a/arch/mips/cavium-octeon/executive/cvmx-fpa.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/***********************license start***************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
- ***********************license end**************************************/
-
-/**
- * @file
- *
- * Support library for the hardware Free Pool Allocator.
- *
- *
- */
-
-#include "cvmx-config.h"
-#include "cvmx.h"
-#include "cvmx-fpa.h"
-#include "cvmx-ipd.h"
-
-/**
- * Current state of all the pools. Use access functions
- * instead of using it directly.
- */
-CVMX_SHARED cvmx_fpa_pool_info_t cvmx_fpa_pool_info[CVMX_FPA_NUM_POOLS];
-
-/**
- * Setup a FPA pool to control a new block of memory. The
- * buffer pointer must be a physical address.
- *
- * @pool: Pool to initialize
- * 0 <= pool < 8
- * @name: Constant character string to name this pool.
- * String is not copied.
- * @buffer: Pointer to the block of memory to use. This must be
- * accessible by all processors and external hardware.
- * @block_size: Size for each block controlled by the FPA
- * @num_blocks: Number of blocks
- *
- * Returns 0 on Success,
- * -1 on failure
- */
-int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer,
- uint64_t block_size, uint64_t num_blocks)
-{
- char *ptr;
- if (!buffer) {
- cvmx_dprintf
- ("ERROR: cvmx_fpa_setup_pool: NULL buffer pointer!\n");
- return -1;
- }
- if (pool >= CVMX_FPA_NUM_POOLS) {
- cvmx_dprintf("ERROR: cvmx_fpa_setup_pool: Illegal pool!\n");
- return -1;
- }
-
- if (block_size < CVMX_FPA_MIN_BLOCK_SIZE) {
- cvmx_dprintf
- ("ERROR: cvmx_fpa_setup_pool: Block size too small.\n");
- return -1;
- }
-
- if (((unsigned long)buffer & (CVMX_FPA_ALIGNMENT - 1)) != 0) {
- cvmx_dprintf
- ("ERROR: cvmx_fpa_setup_pool: Buffer not aligned properly.\n");
- return -1;
- }
-
- cvmx_fpa_pool_info[pool].name = name;
- cvmx_fpa_pool_info[pool].size = block_size;
- cvmx_fpa_pool_info[pool].starting_element_count = num_blocks;
- cvmx_fpa_pool_info[pool].base = buffer;
-
- ptr = (char *)buffer;
- while (num_blocks--) {
- cvmx_fpa_free(ptr, pool, 0);
- ptr += block_size;
- }
- return 0;
-}
-
-/**
- * Shutdown a Memory pool and validate that it had all of
- * the buffers originally placed in it.
- *
- * @pool: Pool to shutdown
- * Returns Zero on success
- * - Positive is count of missing buffers
- * - Negative is too many buffers or corrupted pointers
- */
-uint64_t cvmx_fpa_shutdown_pool(uint64_t pool)
-{
- uint64_t errors = 0;
- uint64_t count = 0;
- uint64_t base = cvmx_ptr_to_phys(cvmx_fpa_pool_info[pool].base);
- uint64_t finish =
- base +
- cvmx_fpa_pool_info[pool].size *
- cvmx_fpa_pool_info[pool].starting_element_count;
- void *ptr;
- uint64_t address;
-
- count = 0;
- do {
- ptr = cvmx_fpa_alloc(pool);
- if (ptr)
- address = cvmx_ptr_to_phys(ptr);
- else
- address = 0;
- if (address) {
- if ((address >= base) && (address < finish) &&
- (((address -
- base) % cvmx_fpa_pool_info[pool].size) == 0)) {
- count++;
- } else {
- cvmx_dprintf
- ("ERROR: cvmx_fpa_shutdown_pool: Illegal address 0x%llx in pool %s(%d)\n",
- (unsigned long long)address,
- cvmx_fpa_pool_info[pool].name, (int)pool);
- errors++;
- }
- }
- } while (address);
-
-#ifdef CVMX_ENABLE_PKO_FUNCTIONS
- if (pool == 0)
- cvmx_ipd_free_ptr();
-#endif
-
- if (errors) {
- cvmx_dprintf
- ("ERROR: cvmx_fpa_shutdown_pool: Pool %s(%d) started at 0x%llx, ended at 0x%llx, with a step of 0x%llx\n",
- cvmx_fpa_pool_info[pool].name, (int)pool,
- (unsigned long long)base, (unsigned long long)finish,
- (unsigned long long)cvmx_fpa_pool_info[pool].size);
- return -errors;
- } else
- return 0;
-}
-
-uint64_t cvmx_fpa_get_block_size(uint64_t pool)
-{
- switch (pool) {
- case 0:
- return CVMX_FPA_POOL_0_SIZE;
- case 1:
- return CVMX_FPA_POOL_1_SIZE;
- case 2:
- return CVMX_FPA_POOL_2_SIZE;
- case 3:
- return CVMX_FPA_POOL_3_SIZE;
- case 4:
- return CVMX_FPA_POOL_4_SIZE;
- case 5:
- return CVMX_FPA_POOL_5_SIZE;
- case 6:
- return CVMX_FPA_POOL_6_SIZE;
- case 7:
- return CVMX_FPA_POOL_7_SIZE;
- default:
- return 0;
- }
-}
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c b/arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c
deleted file mode 100644
index c239e5f4ab9a..000000000000
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-fpa.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/***********************license start***************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
- ***********************license end**************************************/
-
-/**
- * @file
- *
- * Helper functions for FPA setup.
- *
- */
-#include "executive-config.h"
-#include "cvmx-config.h"
-#include "cvmx.h"
-#include "cvmx-bootmem.h"
-#include "cvmx-fpa.h"
-#include "cvmx-helper-fpa.h"
-
-/**
- * Allocate memory for and initialize a single FPA pool.
- *
- * @pool: Pool to initialize
- * @buffer_size: Size of buffers to allocate in bytes
- * @buffers: Number of buffers to put in the pool. Zero is allowed
- * @name: String name of the pool for debugging purposes
- * Returns Zero on success, non-zero on failure
- */
-static int __cvmx_helper_initialize_fpa_pool(int pool, uint64_t buffer_size,
- uint64_t buffers, const char *name)
-{
- uint64_t current_num;
- void *memory;
- uint64_t align = CVMX_CACHE_LINE_SIZE;
-
- /*
- * Align the allocation so that power of 2 size buffers are
- * naturally aligned.
- */
- while (align < buffer_size)
- align = align << 1;
-
- if (buffers == 0)
- return 0;
-
- current_num = cvmx_read_csr(CVMX_FPA_QUEX_AVAILABLE(pool));
- if (current_num) {
- cvmx_dprintf("Fpa pool %d(%s) already has %llu buffers. "
- "Skipping setup.\n",
- pool, name, (unsigned long long)current_num);
- return 0;
- }
-
- memory = cvmx_bootmem_alloc(buffer_size * buffers, align);
- if (memory == NULL) {
- cvmx_dprintf("Out of memory initializing fpa pool %d(%s).\n",
- pool, name);
- return -1;
- }
- cvmx_fpa_setup_pool(pool, name, memory, buffer_size, buffers);
- return 0;
-}
-
-/**
- * Allocate memory and initialize the FPA pools using memory
- * from cvmx-bootmem. Specifying zero for the number of
- * buffers will cause that FPA pool to not be setup. This is
- * useful if you aren't using some of the hardware and want
- * to save memory. Use cvmx_helper_initialize_fpa instead of
- * this function directly.
- *
- * @pip_pool: Should always be CVMX_FPA_PACKET_POOL
- * @pip_size: Should always be CVMX_FPA_PACKET_POOL_SIZE
- * @pip_buffers:
- * Number of packet buffers.
- * @wqe_pool: Should always be CVMX_FPA_WQE_POOL
- * @wqe_size: Should always be CVMX_FPA_WQE_POOL_SIZE
- * @wqe_entries:
- * Number of work queue entries
- * @pko_pool: Should always be CVMX_FPA_OUTPUT_BUFFER_POOL
- * @pko_size: Should always be CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE
- * @pko_buffers:
- * PKO Command buffers. You should at minimum have two per
- * each PKO queue.
- * @tim_pool: Should always be CVMX_FPA_TIMER_POOL
- * @tim_size: Should always be CVMX_FPA_TIMER_POOL_SIZE
- * @tim_buffers:
- * TIM ring buffer command queues. At least two per timer bucket
- * is recommened.
- * @dfa_pool: Should always be CVMX_FPA_DFA_POOL
- * @dfa_size: Should always be CVMX_FPA_DFA_POOL_SIZE
- * @dfa_buffers:
- * DFA command buffer. A relatively small (32 for example)
- * number should work.
- * Returns Zero on success, non-zero if out of memory
- */
-static int __cvmx_helper_initialize_fpa(int pip_pool, int pip_size,
- int pip_buffers, int wqe_pool,
- int wqe_size, int wqe_entries,
- int pko_pool, int pko_size,
- int pko_buffers, int tim_pool,
- int tim_size, int tim_buffers,
- int dfa_pool, int dfa_size,
- int dfa_buffers)
-{
- int status;
-
- cvmx_fpa_enable();
-
- if ((pip_buffers > 0) && (pip_buffers <= 64))
- cvmx_dprintf
- ("Warning: %d packet buffers may not be enough for hardware"
- " prefetch. 65 or more is recommended.\n", pip_buffers);
-
- if (pip_pool >= 0) {
- status =
- __cvmx_helper_initialize_fpa_pool(pip_pool, pip_size,
- pip_buffers,
- "Packet Buffers");
- if (status)
- return status;
- }
-
- if (wqe_pool >= 0) {
- status =
- __cvmx_helper_initialize_fpa_pool(wqe_pool, wqe_size,
- wqe_entries,
- "Work Queue Entries");
- if (status)
- return status;
- }
-
- if (pko_pool >= 0) {
- status =
- __cvmx_helper_initialize_fpa_pool(pko_pool, pko_size,
- pko_buffers,
- "PKO Command Buffers");
- if (status)
- return status;
- }
-
- if (tim_pool >= 0) {
- status =
- __cvmx_helper_initialize_fpa_pool(tim_pool, tim_size,
- tim_buffers,
- "TIM Command Buffers");
- if (status)
- return status;
- }
-
- if (dfa_pool >= 0) {
- status =
- __cvmx_helper_initialize_fpa_pool(dfa_pool, dfa_size,
- dfa_buffers,
- "DFA Command Buffers");
- if (status)
- return status;
- }
-
- return 0;
-}
-
-/**
- * Allocate memory and initialize the FPA pools using memory
- * from cvmx-bootmem. Sizes of each element in the pools is
- * controlled by the cvmx-config.h header file. Specifying
- * zero for any parameter will cause that FPA pool to not be
- * setup. This is useful if you aren't using some of the
- * hardware and want to save memory.
- *
- * @packet_buffers:
- * Number of packet buffers to allocate
- * @work_queue_entries:
- * Number of work queue entries
- * @pko_buffers:
- * PKO Command buffers. You should at minimum have two per
- * each PKO queue.
- * @tim_buffers:
- * TIM ring buffer command queues. At least two per timer bucket
- * is recommened.
- * @dfa_buffers:
- * DFA command buffer. A relatively small (32 for example)
- * number should work.
- * Returns Zero on success, non-zero if out of memory
- */
-int cvmx_helper_initialize_fpa(int packet_buffers, int work_queue_entries,
- int pko_buffers, int tim_buffers,
- int dfa_buffers)
-{
-#ifndef CVMX_FPA_PACKET_POOL
-#define CVMX_FPA_PACKET_POOL -1
-#define CVMX_FPA_PACKET_POOL_SIZE 0
-#endif
-#ifndef CVMX_FPA_WQE_POOL
-#define CVMX_FPA_WQE_POOL -1
-#define CVMX_FPA_WQE_POOL_SIZE 0
-#endif
-#ifndef CVMX_FPA_OUTPUT_BUFFER_POOL
-#define CVMX_FPA_OUTPUT_BUFFER_POOL -1
-#define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE 0
-#endif
-#ifndef CVMX_FPA_TIMER_POOL
-#define CVMX_FPA_TIMER_POOL -1
-#define CVMX_FPA_TIMER_POOL_SIZE 0
-#endif
-#ifndef CVMX_FPA_DFA_POOL
-#define CVMX_FPA_DFA_POOL -1
-#define CVMX_FPA_DFA_POOL_SIZE 0
-#endif
- return __cvmx_helper_initialize_fpa(CVMX_FPA_PACKET_POOL,
- CVMX_FPA_PACKET_POOL_SIZE,
- packet_buffers, CVMX_FPA_WQE_POOL,
- CVMX_FPA_WQE_POOL_SIZE,
- work_queue_entries,
- CVMX_FPA_OUTPUT_BUFFER_POOL,
- CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE,
- pko_buffers, CVMX_FPA_TIMER_POOL,
- CVMX_FPA_TIMER_POOL_SIZE,
- tim_buffers, CVMX_FPA_DFA_POOL,
- CVMX_FPA_DFA_POOL_SIZE,
- dfa_buffers);
-}
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index ffd4ae660f79..7fb1f222b8a5 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -3,14 +3,17 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004-2008, 2009, 2010, 2011 Cavium Networks
+ * Copyright (C) 2004-2012 Cavium, Inc.
*/
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/bitops.h>
#include <linux/percpu.h>
+#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/smp.h>
+#include <linux/of.h>
#include <asm/octeon/octeon.h>
@@ -42,9 +45,9 @@ struct octeon_core_chip_data {
static struct octeon_core_chip_data octeon_irq_core_chip_data[MIPS_CORE_IRQ_LINES];
-static void __init octeon_irq_set_ciu_mapping(int irq, int line, int bit,
- struct irq_chip *chip,
- irq_flow_handler_t handler)
+static void octeon_irq_set_ciu_mapping(int irq, int line, int bit,
+ struct irq_chip *chip,
+ irq_flow_handler_t handler)
{
union octeon_ciu_chip_data cd;
@@ -505,6 +508,85 @@ static void octeon_irq_ciu_enable_all_v2(struct irq_data *data)
}
}
+static void octeon_irq_gpio_setup(struct irq_data *data)
+{
+ union cvmx_gpio_bit_cfgx cfg;
+ union octeon_ciu_chip_data cd;
+ u32 t = irqd_get_trigger_type(data);
+
+ cd.p = irq_data_get_irq_chip_data(data);
+
+ cfg.u64 = 0;
+ cfg.s.int_en = 1;
+ cfg.s.int_type = (t & IRQ_TYPE_EDGE_BOTH) != 0;
+ cfg.s.rx_xor = (t & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING)) != 0;
+
+ /* 140 nS glitch filter*/
+ cfg.s.fil_cnt = 7;
+ cfg.s.fil_sel = 3;
+
+ cvmx_write_csr(CVMX_GPIO_BIT_CFGX(cd.s.bit - 16), cfg.u64);
+}
+
+static void octeon_irq_ciu_enable_gpio_v2(struct irq_data *data)
+{
+ octeon_irq_gpio_setup(data);
+ octeon_irq_ciu_enable_v2(data);
+}
+
+static void octeon_irq_ciu_enable_gpio(struct irq_data *data)
+{
+ octeon_irq_gpio_setup(data);
+ octeon_irq_ciu_enable(data);
+}
+
+static int octeon_irq_ciu_gpio_set_type(struct irq_data *data, unsigned int t)
+{
+ irqd_set_trigger_type(data, t);
+ octeon_irq_gpio_setup(data);
+
+ return IRQ_SET_MASK_OK;
+}
+
+static void octeon_irq_ciu_disable_gpio_v2(struct irq_data *data)
+{
+ union octeon_ciu_chip_data cd;
+
+ cd.p = irq_data_get_irq_chip_data(data);
+ cvmx_write_csr(CVMX_GPIO_BIT_CFGX(cd.s.bit - 16), 0);
+
+ octeon_irq_ciu_disable_all_v2(data);
+}
+
+static void octeon_irq_ciu_disable_gpio(struct irq_data *data)
+{
+ union octeon_ciu_chip_data cd;
+
+ cd.p = irq_data_get_irq_chip_data(data);
+ cvmx_write_csr(CVMX_GPIO_BIT_CFGX(cd.s.bit - 16), 0);
+
+ octeon_irq_ciu_disable_all(data);
+}
+
+static void octeon_irq_ciu_gpio_ack(struct irq_data *data)
+{
+ union octeon_ciu_chip_data cd;
+ u64 mask;
+
+ cd.p = irq_data_get_irq_chip_data(data);
+ mask = 1ull << (cd.s.bit - 16);
+
+ cvmx_write_csr(CVMX_GPIO_INT_CLR, mask);
+}
+
+static void octeon_irq_handle_gpio(unsigned int irq, struct irq_desc *desc)
+{
+ if (irqd_get_trigger_type(irq_desc_get_irq_data(desc)) & IRQ_TYPE_EDGE_BOTH)
+ handle_edge_irq(irq, desc);
+ else
+ handle_level_irq(irq, desc);
+}
+
#ifdef CONFIG_SMP
static void octeon_irq_cpu_offline_ciu(struct irq_data *data)
@@ -650,18 +732,6 @@ static struct irq_chip octeon_irq_chip_ciu_v2 = {
.name = "CIU",
.irq_enable = octeon_irq_ciu_enable_v2,
.irq_disable = octeon_irq_ciu_disable_all_v2,
- .irq_mask = octeon_irq_ciu_disable_local_v2,
- .irq_unmask = octeon_irq_ciu_enable_v2,
-#ifdef CONFIG_SMP
- .irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
- .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
-#endif
-};
-
-static struct irq_chip octeon_irq_chip_ciu_edge_v2 = {
- .name = "CIU-E",
- .irq_enable = octeon_irq_ciu_enable_v2,
- .irq_disable = octeon_irq_ciu_disable_all_v2,
.irq_ack = octeon_irq_ciu_ack,
.irq_mask = octeon_irq_ciu_disable_local_v2,
.irq_unmask = octeon_irq_ciu_enable_v2,
@@ -675,19 +745,8 @@ static struct irq_chip octeon_irq_chip_ciu = {
.name = "CIU",
.irq_enable = octeon_irq_ciu_enable,
.irq_disable = octeon_irq_ciu_disable_all,
- .irq_mask = octeon_irq_dummy_mask,
-#ifdef CONFIG_SMP
- .irq_set_affinity = octeon_irq_ciu_set_affinity,
- .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
-#endif
-};
-
-static struct irq_chip octeon_irq_chip_ciu_edge = {
- .name = "CIU-E",
- .irq_enable = octeon_irq_ciu_enable,
- .irq_disable = octeon_irq_ciu_disable_all,
- .irq_mask = octeon_irq_dummy_mask,
.irq_ack = octeon_irq_ciu_ack,
+ .irq_mask = octeon_irq_dummy_mask,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity,
.irq_cpu_offline = octeon_irq_cpu_offline_ciu,
@@ -717,6 +776,33 @@ static struct irq_chip octeon_irq_chip_ciu_mbox = {
.flags = IRQCHIP_ONOFFLINE_ENABLED,
};
+static struct irq_chip octeon_irq_chip_ciu_gpio_v2 = {
+ .name = "CIU-GPIO",
+ .irq_enable = octeon_irq_ciu_enable_gpio_v2,
+ .irq_disable = octeon_irq_ciu_disable_gpio_v2,
+ .irq_ack = octeon_irq_ciu_gpio_ack,
+ .irq_mask = octeon_irq_ciu_disable_local_v2,
+ .irq_unmask = octeon_irq_ciu_enable_v2,
+ .irq_set_type = octeon_irq_ciu_gpio_set_type,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
+#endif
+ .flags = IRQCHIP_SET_TYPE_MASKED,
+};
+
+static struct irq_chip octeon_irq_chip_ciu_gpio = {
+ .name = "CIU-GPIO",
+ .irq_enable = octeon_irq_ciu_enable_gpio,
+ .irq_disable = octeon_irq_ciu_disable_gpio,
+ .irq_mask = octeon_irq_dummy_mask,
+ .irq_ack = octeon_irq_ciu_gpio_ack,
+ .irq_set_type = octeon_irq_ciu_gpio_set_type,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = octeon_irq_ciu_set_affinity,
+#endif
+ .flags = IRQCHIP_SET_TYPE_MASKED,
+};
+
/*
* Watchdog interrupts are special. They are associated with a single
* core, so we hardwire the affinity to that core.
@@ -764,6 +850,178 @@ static struct irq_chip octeon_irq_chip_ciu_wd = {
.irq_mask = octeon_irq_dummy_mask,
};
+static bool octeon_irq_ciu_is_edge(unsigned int line, unsigned int bit)
+{
+ bool edge = false;
+
+ if (line == 0)
+ switch (bit) {
+ case 48 ... 49: /* GMX DRP */
+ case 50: /* IPD_DRP */
+ case 52 ... 55: /* Timers */
+ case 58: /* MPI */
+ edge = true;
+ break;
+ default:
+ break;
+ }
+ else /* line == 1 */
+ switch (bit) {
+ case 47: /* PTP */
+ edge = true;
+ break;
+ default:
+ break;
+ }
+ return edge;
+}
+
+struct octeon_irq_gpio_domain_data {
+ unsigned int base_hwirq;
+};
+
+static int octeon_irq_gpio_xlat(struct irq_domain *d,
+ struct device_node *node,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ unsigned int type;
+ unsigned int pin;
+ unsigned int trigger;
+ struct octeon_irq_gpio_domain_data *gpiod;
+
+ if (d->of_node != node)
+ return -EINVAL;
+
+ if (intsize < 2)
+ return -EINVAL;
+
+ pin = intspec[0];
+ if (pin >= 16)
+ return -EINVAL;
+
+ trigger = intspec[1];
+
+ switch (trigger) {
+ case 1:
+ type = IRQ_TYPE_EDGE_RISING;
+ break;
+ case 2:
+ type = IRQ_TYPE_EDGE_FALLING;
+ break;
+ case 4:
+ type = IRQ_TYPE_LEVEL_HIGH;
+ break;
+ case 8:
+ type = IRQ_TYPE_LEVEL_LOW;
+ break;
+ default:
+ pr_err("Error: (%s) Invalid irq trigger specification: %x\n",
+ node->name,
+ trigger);
+ type = IRQ_TYPE_LEVEL_LOW;
+ break;
+ }
+ *out_type = type;
+ gpiod = d->host_data;
+ *out_hwirq = gpiod->base_hwirq + pin;
+
+ return 0;
+}
+
+static int octeon_irq_ciu_xlat(struct irq_domain *d,
+ struct device_node *node,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ unsigned int ciu, bit;
+
+ ciu = intspec[0];
+ bit = intspec[1];
+
+ if (ciu > 1 || bit > 63)
+ return -EINVAL;
+
+ /* These are the GPIO lines */
+ if (ciu == 0 && bit >= 16 && bit < 32)
+ return -EINVAL;
+
+ *out_hwirq = (ciu << 6) | bit;
+ *out_type = 0;
+
+ return 0;
+}
+
+static struct irq_chip *octeon_irq_ciu_chip;
+static struct irq_chip *octeon_irq_gpio_chip;
+
+static bool octeon_irq_virq_in_range(unsigned int virq)
+{
+ /* We cannot let it overflow the mapping array. */
+ if (virq < (1ul << 8 * sizeof(octeon_irq_ciu_to_irq[0][0])))
+ return true;
+
+ WARN_ONCE(true, "virq out of range %u.\n", virq);
+ return false;
+}
+
+static int octeon_irq_ciu_map(struct irq_domain *d,
+ unsigned int virq, irq_hw_number_t hw)
+{
+ unsigned int line = hw >> 6;
+ unsigned int bit = hw & 63;
+
+ if (!octeon_irq_virq_in_range(virq))
+ return -EINVAL;
+
+ if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0)
+ return -EINVAL;
+
+ if (octeon_irq_ciu_is_edge(line, bit))
+ octeon_irq_set_ciu_mapping(virq, line, bit,
+ octeon_irq_ciu_chip,
+ handle_edge_irq);
+ else
+ octeon_irq_set_ciu_mapping(virq, line, bit,
+ octeon_irq_ciu_chip,
+ handle_level_irq);
+
+ return 0;
+}
+
+static int octeon_irq_gpio_map(struct irq_domain *d,
+ unsigned int virq, irq_hw_number_t hw)
+{
+ unsigned int line = hw >> 6;
+ unsigned int bit = hw & 63;
+
+ if (!octeon_irq_virq_in_range(virq))
+ return -EINVAL;
+
+ if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0)
+ return -EINVAL;
+
+ octeon_irq_set_ciu_mapping(virq, line, bit,
+ octeon_irq_gpio_chip,
+ octeon_irq_handle_gpio);
+
+ return 0;
+}
+
+static struct irq_domain_ops octeon_irq_domain_ciu_ops = {
+ .map = octeon_irq_ciu_map,
+ .xlate = octeon_irq_ciu_xlat,
+};
+
+static struct irq_domain_ops octeon_irq_domain_gpio_ops = {
+ .map = octeon_irq_gpio_map,
+ .xlate = octeon_irq_gpio_xlat,
+};
+
static void octeon_irq_ip2_v1(void)
{
const unsigned long core_id = cvmx_get_core_num();
@@ -887,9 +1145,10 @@ static void __init octeon_irq_init_ciu(void)
{
unsigned int i;
struct irq_chip *chip;
- struct irq_chip *chip_edge;
struct irq_chip *chip_mbox;
struct irq_chip *chip_wd;
+ struct device_node *gpio_node;
+ struct device_node *ciu_node;
octeon_irq_init_ciu_percpu();
octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu;
@@ -901,17 +1160,18 @@ static void __init octeon_irq_init_ciu(void)
octeon_irq_ip2 = octeon_irq_ip2_v2;
octeon_irq_ip3 = octeon_irq_ip3_v2;
chip = &octeon_irq_chip_ciu_v2;
- chip_edge = &octeon_irq_chip_ciu_edge_v2;
chip_mbox = &octeon_irq_chip_ciu_mbox_v2;
chip_wd = &octeon_irq_chip_ciu_wd_v2;
+ octeon_irq_gpio_chip = &octeon_irq_chip_ciu_gpio_v2;
} else {
octeon_irq_ip2 = octeon_irq_ip2_v1;
octeon_irq_ip3 = octeon_irq_ip3_v1;
chip = &octeon_irq_chip_ciu;
- chip_edge = &octeon_irq_chip_ciu_edge;
chip_mbox = &octeon_irq_chip_ciu_mbox;
chip_wd = &octeon_irq_chip_ciu_wd;
+ octeon_irq_gpio_chip = &octeon_irq_chip_ciu_gpio;
}
+ octeon_irq_ciu_chip = chip;
octeon_irq_ip4 = octeon_irq_ip4_mask;
/* Mips internal */
@@ -920,80 +1180,49 @@ static void __init octeon_irq_init_ciu(void)
/* CIU_0 */
for (i = 0; i < 16; i++)
octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq);
- for (i = 0; i < 16; i++)
- octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_GPIO0, 0, i + 16, chip, handle_level_irq);
octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART0, 0, 34, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART1, 0, 35, chip, handle_level_irq);
-
for (i = 0; i < 4; i++)
octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq);
for (i = 0; i < 4; i++)
octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_TWSI, 0, 45, chip, handle_level_irq);
octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_TRACE0, 0, 47, chip, handle_level_irq);
-
- for (i = 0; i < 2; i++)
- octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_GMX_DRP0, 0, i + 48, chip_edge, handle_edge_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_IPD_DRP, 0, 50, chip_edge, handle_edge_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_KEY_ZERO, 0, 51, chip_edge, handle_edge_irq);
-
for (i = 0; i < 4; i++)
- octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip_edge, handle_edge_irq);
+ octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq);
octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_PCM, 0, 57, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_MPI, 0, 58, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_TWSI2, 0, 59, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_POWIQ, 0, 60, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_IPDPPTHR, 0, 61, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_MII0, 0, 62, chip, handle_level_irq);
octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq);
/* CIU_1 */
for (i = 0; i < 16; i++)
octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART2, 1, 16, chip, handle_level_irq);
octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_MII1, 1, 18, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_NAND, 1, 19, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_MIO, 1, 20, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_IOB, 1, 21, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_FPA, 1, 22, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_POW, 1, 23, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_L2C, 1, 24, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_IPD, 1, 25, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_PIP, 1, 26, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_PKO, 1, 27, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_ZIP, 1, 28, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_TIM, 1, 29, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_RAD, 1, 30, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_KEY, 1, 31, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_DFA, 1, 32, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_USBCTL, 1, 33, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_SLI, 1, 34, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_DPI, 1, 35, chip, handle_level_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_AGX0, 1, 36, chip, handle_level_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_AGL, 1, 46, chip, handle_level_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_PTP, 1, 47, chip_edge, handle_edge_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_PEM0, 1, 48, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_PEM1, 1, 49, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_SRIO0, 1, 50, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_SRIO1, 1, 51, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_LMC0, 1, 52, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_DFM, 1, 56, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_RST, 1, 63, chip, handle_level_irq);
+
+ gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio");
+ if (gpio_node) {
+ struct octeon_irq_gpio_domain_data *gpiod;
+
+ gpiod = kzalloc(sizeof(*gpiod), GFP_KERNEL);
+ if (gpiod) {
+ /* gpio domain host_data is the base hwirq number. */
+ gpiod->base_hwirq = 16;
+ irq_domain_add_linear(gpio_node, 16, &octeon_irq_domain_gpio_ops, gpiod);
+ of_node_put(gpio_node);
+ } else
+ pr_warn("Cannot allocate memory for GPIO irq_domain.\n");
+ } else
+ pr_warn("Cannot find device node for cavium,octeon-3860-gpio.\n");
+
+ ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu");
+ if (ciu_node) {
+ irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL);
+ of_node_put(ciu_node);
+ } else
+ pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n");
/* Enable the CIU lines */
set_c0_status(STATUSF_IP3 | STATUSF_IP2);
diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S
index 88e0cddca205..db478dbb9c7b 100644
--- a/arch/mips/cavium-octeon/octeon-memcpy.S
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -164,6 +164,14 @@
.set noat
/*
+ * t7 is used as a flag to note inatomic mode.
+ */
+LEAF(__copy_user_inatomic)
+ b __copy_user_common
+ li t7, 1
+ END(__copy_user_inatomic)
+
+/*
* A combined memcpy/__copy_user
* __copy_user sets len to 0 for success; else to an upper bound of
* the number of uncopied bytes.
@@ -174,6 +182,8 @@ LEAF(memcpy) /* a0=dst a1=src a2=len */
move v0, dst /* return value */
__memcpy:
FEXPORT(__copy_user)
+ li t7, 0 /* not inatomic */
+__copy_user_common:
/*
* Note: dst & src may be unaligned, len may be 0
* Temps
@@ -412,7 +422,6 @@ l_exc_copy:
* Assumes src < THREAD_BUADDR($28)
*/
LOAD t0, TI_TASK($28)
- nop
LOAD t0, THREAD_BUADDR(t0)
1:
EXC( lb t1, 0(src), l_exc)
@@ -422,10 +431,9 @@ EXC( lb t1, 0(src), l_exc)
ADD dst, dst, 1
l_exc:
LOAD t0, TI_TASK($28)
- nop
LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
- nop
SUB len, AT, t0 # len number of uncopied bytes
+ bnez t7, 2f /* Skip the zeroing out part if inatomic */
/*
* Here's where we rely on src and dst being incremented in tandem,
* See (3) above.
@@ -443,7 +451,7 @@ l_exc:
ADD dst, dst, 1
bnez src, 1b
SUB src, src, 1
- jr ra
+2: jr ra
nop
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index cd61d7281d91..0938df10a71c 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004-2010 Cavium Networks
+ * Copyright (C) 2004-2011 Cavium Networks
* Copyright (C) 2008 Wind River Systems
*/
@@ -13,10 +13,16 @@
#include <linux/usb.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-rnm-defs.h>
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-board.h>
static struct octeon_cf_data octeon_cf_data;
@@ -162,182 +168,6 @@ out:
}
device_initcall(octeon_rng_device_init);
-static struct i2c_board_info __initdata octeon_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ds1337", 0x68),
- },
-};
-
-static int __init octeon_i2c_devices_init(void)
-{
- return i2c_register_board_info(0, octeon_i2c_devices,
- ARRAY_SIZE(octeon_i2c_devices));
-}
-arch_initcall(octeon_i2c_devices_init);
-
-#define OCTEON_I2C_IO_BASE 0x1180000001000ull
-#define OCTEON_I2C_IO_UNIT_OFFSET 0x200
-
-static struct octeon_i2c_data octeon_i2c_data[2];
-
-static int __init octeon_i2c_device_init(void)
-{
- struct platform_device *pd;
- int ret = 0;
- int port, num_ports;
-
- struct resource i2c_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- }
- };
-
- if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX))
- num_ports = 2;
- else
- num_ports = 1;
-
- for (port = 0; port < num_ports; port++) {
- octeon_i2c_data[port].sys_freq = octeon_get_io_clock_rate();
- /*FIXME: should be examined. At the moment is set for 100Khz */
- octeon_i2c_data[port].i2c_freq = 100000;
-
- pd = platform_device_alloc("i2c-octeon", port);
- if (!pd) {
- ret = -ENOMEM;
- goto out;
- }
-
- pd->dev.platform_data = octeon_i2c_data + port;
-
- i2c_resources[0].start =
- OCTEON_I2C_IO_BASE + (port * OCTEON_I2C_IO_UNIT_OFFSET);
- i2c_resources[0].end = i2c_resources[0].start + 0x1f;
- switch (port) {
- case 0:
- i2c_resources[1].start = OCTEON_IRQ_TWSI;
- i2c_resources[1].end = OCTEON_IRQ_TWSI;
- break;
- case 1:
- i2c_resources[1].start = OCTEON_IRQ_TWSI2;
- i2c_resources[1].end = OCTEON_IRQ_TWSI2;
- break;
- default:
- BUG();
- }
-
- ret = platform_device_add_resources(pd,
- i2c_resources,
- ARRAY_SIZE(i2c_resources));
- if (ret)
- goto fail;
-
- ret = platform_device_add(pd);
- if (ret)
- goto fail;
- }
- return ret;
-fail:
- platform_device_put(pd);
-out:
- return ret;
-}
-device_initcall(octeon_i2c_device_init);
-
-/* Octeon SMI/MDIO interface. */
-static int __init octeon_mdiobus_device_init(void)
-{
- struct platform_device *pd;
- int ret = 0;
-
- if (octeon_is_simulation())
- return 0; /* No mdio in the simulator. */
-
- /* The bus number is the platform_device id. */
- pd = platform_device_alloc("mdio-octeon", 0);
- if (!pd) {
- ret = -ENOMEM;
- goto out;
- }
-
- ret = platform_device_add(pd);
- if (ret)
- goto fail;
-
- return ret;
-fail:
- platform_device_put(pd);
-
-out:
- return ret;
-
-}
-device_initcall(octeon_mdiobus_device_init);
-
-/* Octeon mgmt port Ethernet interface. */
-static int __init octeon_mgmt_device_init(void)
-{
- struct platform_device *pd;
- int ret = 0;
- int port, num_ports;
-
- struct resource mgmt_port_resource = {
- .flags = IORESOURCE_IRQ,
- .start = -1,
- .end = -1
- };
-
- if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX))
- return 0;
-
- if (OCTEON_IS_MODEL(OCTEON_CN56XX))
- num_ports = 1;
- else
- num_ports = 2;
-
- for (port = 0; port < num_ports; port++) {
- pd = platform_device_alloc("octeon_mgmt", port);
- if (!pd) {
- ret = -ENOMEM;
- goto out;
- }
- /* No DMA restrictions */
- pd->dev.coherent_dma_mask = DMA_BIT_MASK(64);
- pd->dev.dma_mask = &pd->dev.coherent_dma_mask;
-
- switch (port) {
- case 0:
- mgmt_port_resource.start = OCTEON_IRQ_MII0;
- break;
- case 1:
- mgmt_port_resource.start = OCTEON_IRQ_MII1;
- break;
- default:
- BUG();
- }
- mgmt_port_resource.end = mgmt_port_resource.start;
-
- ret = platform_device_add_resources(pd, &mgmt_port_resource, 1);
-
- if (ret)
- goto fail;
-
- ret = platform_device_add(pd);
- if (ret)
- goto fail;
- }
- return ret;
-fail:
- platform_device_put(pd);
-
-out:
- return ret;
-
-}
-device_initcall(octeon_mgmt_device_init);
-
#ifdef CONFIG_USB
static int __init octeon_ehci_device_init(void)
@@ -440,6 +270,521 @@ device_initcall(octeon_ohci_device_init);
#endif /* CONFIG_USB */
+static struct of_device_id __initdata octeon_ids[] = {
+ { .compatible = "simple-bus", },
+ { .compatible = "cavium,octeon-6335-uctl", },
+ { .compatible = "cavium,octeon-3860-bootbus", },
+ { .compatible = "cavium,mdio-mux", },
+ { .compatible = "gpio-leds", },
+ {},
+};
+
+static bool __init octeon_has_88e1145(void)
+{
+ return !OCTEON_IS_MODEL(OCTEON_CN52XX) &&
+ !OCTEON_IS_MODEL(OCTEON_CN6XXX) &&
+ !OCTEON_IS_MODEL(OCTEON_CN56XX);
+}
+
+static void __init octeon_fdt_set_phy(int eth, int phy_addr)
+{
+ const __be32 *phy_handle;
+ const __be32 *alt_phy_handle;
+ const __be32 *reg;
+ u32 phandle;
+ int phy;
+ int alt_phy;
+ const char *p;
+ int current_len;
+ char new_name[20];
+
+ phy_handle = fdt_getprop(initial_boot_params, eth, "phy-handle", NULL);
+ if (!phy_handle)
+ return;
+
+ phandle = be32_to_cpup(phy_handle);
+ phy = fdt_node_offset_by_phandle(initial_boot_params, phandle);
+
+ alt_phy_handle = fdt_getprop(initial_boot_params, eth, "cavium,alt-phy-handle", NULL);
+ if (alt_phy_handle) {
+ u32 alt_phandle = be32_to_cpup(alt_phy_handle);
+ alt_phy = fdt_node_offset_by_phandle(initial_boot_params, alt_phandle);
+ } else {
+ alt_phy = -1;
+ }
+
+ if (phy_addr < 0 || phy < 0) {
+ /* Delete the PHY things */
+ fdt_nop_property(initial_boot_params, eth, "phy-handle");
+ /* This one may fail */
+ fdt_nop_property(initial_boot_params, eth, "cavium,alt-phy-handle");
+ if (phy >= 0)
+ fdt_nop_node(initial_boot_params, phy);
+ if (alt_phy >= 0)
+ fdt_nop_node(initial_boot_params, alt_phy);
+ return;
+ }
+
+ if (phy_addr >= 256 && alt_phy > 0) {
+ const struct fdt_property *phy_prop;
+ struct fdt_property *alt_prop;
+ u32 phy_handle_name;
+
+ /* Use the alt phy node instead.*/
+ phy_prop = fdt_get_property(initial_boot_params, eth, "phy-handle", NULL);
+ phy_handle_name = phy_prop->nameoff;
+ fdt_nop_node(initial_boot_params, phy);
+ fdt_nop_property(initial_boot_params, eth, "phy-handle");
+ alt_prop = fdt_get_property_w(initial_boot_params, eth, "cavium,alt-phy-handle", NULL);
+ alt_prop->nameoff = phy_handle_name;
+ phy = alt_phy;
+ }
+
+ phy_addr &= 0xff;
+
+ if (octeon_has_88e1145()) {
+ fdt_nop_property(initial_boot_params, phy, "marvell,reg-init");
+ memset(new_name, 0, sizeof(new_name));
+ strcpy(new_name, "marvell,88e1145");
+ p = fdt_getprop(initial_boot_params, phy, "compatible",
+ &current_len);
+ if (p && current_len >= strlen(new_name))
+ fdt_setprop_inplace(initial_boot_params, phy,
+ "compatible", new_name, current_len);
+ }
+
+ reg = fdt_getprop(initial_boot_params, phy, "reg", NULL);
+ if (phy_addr == be32_to_cpup(reg))
+ return;
+
+ fdt_setprop_inplace_cell(initial_boot_params, phy, "reg", phy_addr);
+
+ snprintf(new_name, sizeof(new_name), "ethernet-phy@%x", phy_addr);
+
+ p = fdt_get_name(initial_boot_params, phy, &current_len);
+ if (p && current_len == strlen(new_name))
+ fdt_set_name(initial_boot_params, phy, new_name);
+ else
+ pr_err("Error: could not rename ethernet phy: <%s>", p);
+}
+
+static void __init octeon_fdt_set_mac_addr(int n, u64 *pmac)
+{
+ u8 new_mac[6];
+ u64 mac = *pmac;
+ int r;
+
+ new_mac[0] = (mac >> 40) & 0xff;
+ new_mac[1] = (mac >> 32) & 0xff;
+ new_mac[2] = (mac >> 24) & 0xff;
+ new_mac[3] = (mac >> 16) & 0xff;
+ new_mac[4] = (mac >> 8) & 0xff;
+ new_mac[5] = mac & 0xff;
+
+ r = fdt_setprop_inplace(initial_boot_params, n, "local-mac-address",
+ new_mac, sizeof(new_mac));
+
+ if (r) {
+ pr_err("Setting \"local-mac-address\" failed %d", r);
+ return;
+ }
+ *pmac = mac + 1;
+}
+
+static void __init octeon_fdt_rm_ethernet(int node)
+{
+ const __be32 *phy_handle;
+
+ phy_handle = fdt_getprop(initial_boot_params, node, "phy-handle", NULL);
+ if (phy_handle) {
+ u32 ph = be32_to_cpup(phy_handle);
+ int p = fdt_node_offset_by_phandle(initial_boot_params, ph);
+ if (p >= 0)
+ fdt_nop_node(initial_boot_params, p);
+ }
+ fdt_nop_node(initial_boot_params, node);
+}
+
+static void __init octeon_fdt_pip_port(int iface, int i, int p, int max, u64 *pmac)
+{
+ char name_buffer[20];
+ int eth;
+ int phy_addr;
+ int ipd_port;
+
+ snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", p);
+ eth = fdt_subnode_offset(initial_boot_params, iface, name_buffer);
+ if (eth < 0)
+ return;
+ if (p > max) {
+ pr_debug("Deleting port %x:%x\n", i, p);
+ octeon_fdt_rm_ethernet(eth);
+ return;
+ }
+ if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+ ipd_port = (0x100 * i) + (0x10 * p) + 0x800;
+ else
+ ipd_port = 16 * i + p;
+
+ phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
+ octeon_fdt_set_phy(eth, phy_addr);
+ octeon_fdt_set_mac_addr(eth, pmac);
+}
+
+static void __init octeon_fdt_pip_iface(int pip, int idx, u64 *pmac)
+{
+ char name_buffer[20];
+ int iface;
+ int p;
+ int count;
+
+ count = cvmx_helper_interface_enumerate(idx);
+
+ snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
+ iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
+ if (iface < 0)
+ return;
+
+ for (p = 0; p < 16; p++)
+ octeon_fdt_pip_port(iface, idx, p, count - 1, pmac);
+}
+
+int __init octeon_prune_device_tree(void)
+{
+ int i, max_port, uart_mask;
+ const char *pip_path;
+ const char *alias_prop;
+ char name_buffer[20];
+ int aliases;
+ u64 mac_addr_base;
+
+ if (fdt_check_header(initial_boot_params))
+ panic("Corrupt Device Tree.");
+
+ aliases = fdt_path_offset(initial_boot_params, "/aliases");
+ if (aliases < 0) {
+ pr_err("Error: No /aliases node in device tree.");
+ return -EINVAL;
+ }
+
+
+ mac_addr_base =
+ ((octeon_bootinfo->mac_addr_base[0] & 0xffull)) << 40 |
+ ((octeon_bootinfo->mac_addr_base[1] & 0xffull)) << 32 |
+ ((octeon_bootinfo->mac_addr_base[2] & 0xffull)) << 24 |
+ ((octeon_bootinfo->mac_addr_base[3] & 0xffull)) << 16 |
+ ((octeon_bootinfo->mac_addr_base[4] & 0xffull)) << 8 |
+ (octeon_bootinfo->mac_addr_base[5] & 0xffull);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN63XX))
+ max_port = 2;
+ else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN68XX))
+ max_port = 1;
+ else
+ max_port = 0;
+
+ if (octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC10E)
+ max_port = 0;
+
+ for (i = 0; i < 2; i++) {
+ int mgmt;
+ snprintf(name_buffer, sizeof(name_buffer),
+ "mix%d", i);
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ name_buffer, NULL);
+ if (alias_prop) {
+ mgmt = fdt_path_offset(initial_boot_params, alias_prop);
+ if (mgmt < 0)
+ continue;
+ if (i >= max_port) {
+ pr_debug("Deleting mix%d\n", i);
+ octeon_fdt_rm_ethernet(mgmt);
+ fdt_nop_property(initial_boot_params, aliases,
+ name_buffer);
+ } else {
+ int phy_addr = cvmx_helper_board_get_mii_address(CVMX_HELPER_BOARD_MGMT_IPD_PORT + i);
+ octeon_fdt_set_phy(mgmt, phy_addr);
+ octeon_fdt_set_mac_addr(mgmt, &mac_addr_base);
+ }
+ }
+ }
+
+ pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL);
+ if (pip_path) {
+ int pip = fdt_path_offset(initial_boot_params, pip_path);
+ if (pip >= 0)
+ for (i = 0; i <= 4; i++)
+ octeon_fdt_pip_iface(pip, i, &mac_addr_base);
+ }
+
+ /* I2C */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) ||
+ OCTEON_IS_MODEL(OCTEON_CN63XX) ||
+ OCTEON_IS_MODEL(OCTEON_CN68XX) ||
+ OCTEON_IS_MODEL(OCTEON_CN56XX))
+ max_port = 2;
+ else
+ max_port = 1;
+
+ for (i = 0; i < 2; i++) {
+ int i2c;
+ snprintf(name_buffer, sizeof(name_buffer),
+ "twsi%d", i);
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ name_buffer, NULL);
+
+ if (alias_prop) {
+ i2c = fdt_path_offset(initial_boot_params, alias_prop);
+ if (i2c < 0)
+ continue;
+ if (i >= max_port) {
+ pr_debug("Deleting twsi%d\n", i);
+ fdt_nop_node(initial_boot_params, i2c);
+ fdt_nop_property(initial_boot_params, aliases,
+ name_buffer);
+ }
+ }
+ }
+
+ /* SMI/MDIO */
+ if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+ max_port = 4;
+ else if (OCTEON_IS_MODEL(OCTEON_CN52XX) ||
+ OCTEON_IS_MODEL(OCTEON_CN63XX) ||
+ OCTEON_IS_MODEL(OCTEON_CN56XX))
+ max_port = 2;
+ else
+ max_port = 1;
+
+ for (i = 0; i < 2; i++) {
+ int i2c;
+ snprintf(name_buffer, sizeof(name_buffer),
+ "smi%d", i);
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ name_buffer, NULL);
+
+ if (alias_prop) {
+ i2c = fdt_path_offset(initial_boot_params, alias_prop);
+ if (i2c < 0)
+ continue;
+ if (i >= max_port) {
+ pr_debug("Deleting smi%d\n", i);
+ fdt_nop_node(initial_boot_params, i2c);
+ fdt_nop_property(initial_boot_params, aliases,
+ name_buffer);
+ }
+ }
+ }
+
+ /* Serial */
+ uart_mask = 3;
+
+ /* Right now CN52XX is the only chip with a third uart */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+ uart_mask |= 4; /* uart2 */
+
+ for (i = 0; i < 3; i++) {
+ int uart;
+ snprintf(name_buffer, sizeof(name_buffer),
+ "uart%d", i);
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ name_buffer, NULL);
+
+ if (alias_prop) {
+ uart = fdt_path_offset(initial_boot_params, alias_prop);
+ if (uart_mask & (1 << i))
+ continue;
+ pr_debug("Deleting uart%d\n", i);
+ fdt_nop_node(initial_boot_params, uart);
+ fdt_nop_property(initial_boot_params, aliases,
+ name_buffer);
+ }
+ }
+
+ /* Compact Flash */
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ "cf0", NULL);
+ if (alias_prop) {
+ union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
+ unsigned long base_ptr, region_base, region_size;
+ unsigned long region1_base = 0;
+ unsigned long region1_size = 0;
+ int cs, bootbus;
+ bool is_16bit = false;
+ bool is_true_ide = false;
+ __be32 new_reg[6];
+ __be32 *ranges;
+ int len;
+
+ int cf = fdt_path_offset(initial_boot_params, alias_prop);
+ base_ptr = 0;
+ if (octeon_bootinfo->major_version == 1
+ && octeon_bootinfo->minor_version >= 1) {
+ if (octeon_bootinfo->compact_flash_common_base_addr)
+ base_ptr = octeon_bootinfo->compact_flash_common_base_addr;
+ } else {
+ base_ptr = 0x1d000800;
+ }
+
+ if (!base_ptr)
+ goto no_cf;
+
+ /* Find CS0 region. */
+ for (cs = 0; cs < 8; cs++) {
+ mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs));
+ region_base = mio_boot_reg_cfg.s.base << 16;
+ region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+ if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
+ && base_ptr < region_base + region_size) {
+ is_16bit = mio_boot_reg_cfg.s.width;
+ break;
+ }
+ }
+ if (cs >= 7) {
+ /* cs and cs + 1 are CS0 and CS1, both must be less than 8. */
+ goto no_cf;
+ }
+
+ if (!(base_ptr & 0xfffful)) {
+ /*
+ * Boot loader signals availability of DMA (true_ide
+ * mode) by setting low order bits of base_ptr to
+ * zero.
+ */
+
+ /* Asume that CS1 immediately follows. */
+ mio_boot_reg_cfg.u64 =
+ cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs + 1));
+ region1_base = mio_boot_reg_cfg.s.base << 16;
+ region1_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+ if (!mio_boot_reg_cfg.s.en)
+ goto no_cf;
+ is_true_ide = true;
+
+ } else {
+ fdt_nop_property(initial_boot_params, cf, "cavium,true-ide");
+ fdt_nop_property(initial_boot_params, cf, "cavium,dma-engine-handle");
+ if (!is_16bit) {
+ __be32 width = cpu_to_be32(8);
+ fdt_setprop_inplace(initial_boot_params, cf,
+ "cavium,bus-width", &width, sizeof(width));
+ }
+ }
+ new_reg[0] = cpu_to_be32(cs);
+ new_reg[1] = cpu_to_be32(0);
+ new_reg[2] = cpu_to_be32(0x10000);
+ new_reg[3] = cpu_to_be32(cs + 1);
+ new_reg[4] = cpu_to_be32(0);
+ new_reg[5] = cpu_to_be32(0x10000);
+ fdt_setprop_inplace(initial_boot_params, cf,
+ "reg", new_reg, sizeof(new_reg));
+
+ bootbus = fdt_parent_offset(initial_boot_params, cf);
+ if (bootbus < 0)
+ goto no_cf;
+ ranges = fdt_getprop_w(initial_boot_params, bootbus, "ranges", &len);
+ if (!ranges || len < (5 * 8 * sizeof(__be32)))
+ goto no_cf;
+
+ ranges[(cs * 5) + 2] = cpu_to_be32(region_base >> 32);
+ ranges[(cs * 5) + 3] = cpu_to_be32(region_base & 0xffffffff);
+ ranges[(cs * 5) + 4] = cpu_to_be32(region_size);
+ if (is_true_ide) {
+ cs++;
+ ranges[(cs * 5) + 2] = cpu_to_be32(region1_base >> 32);
+ ranges[(cs * 5) + 3] = cpu_to_be32(region1_base & 0xffffffff);
+ ranges[(cs * 5) + 4] = cpu_to_be32(region1_size);
+ }
+ goto end_cf;
+no_cf:
+ fdt_nop_node(initial_boot_params, cf);
+
+end_cf:
+ ;
+ }
+
+ /* 8 char LED */
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ "led0", NULL);
+ if (alias_prop) {
+ union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
+ unsigned long base_ptr, region_base, region_size;
+ int cs, bootbus;
+ __be32 new_reg[6];
+ __be32 *ranges;
+ int len;
+ int led = fdt_path_offset(initial_boot_params, alias_prop);
+
+ base_ptr = octeon_bootinfo->led_display_base_addr;
+ if (base_ptr == 0)
+ goto no_led;
+ /* Find CS0 region. */
+ for (cs = 0; cs < 8; cs++) {
+ mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs));
+ region_base = mio_boot_reg_cfg.s.base << 16;
+ region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+ if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
+ && base_ptr < region_base + region_size)
+ break;
+ }
+
+ if (cs > 7)
+ goto no_led;
+
+ new_reg[0] = cpu_to_be32(cs);
+ new_reg[1] = cpu_to_be32(0x20);
+ new_reg[2] = cpu_to_be32(0x20);
+ new_reg[3] = cpu_to_be32(cs);
+ new_reg[4] = cpu_to_be32(0);
+ new_reg[5] = cpu_to_be32(0x20);
+ fdt_setprop_inplace(initial_boot_params, led,
+ "reg", new_reg, sizeof(new_reg));
+
+ bootbus = fdt_parent_offset(initial_boot_params, led);
+ if (bootbus < 0)
+ goto no_led;
+ ranges = fdt_getprop_w(initial_boot_params, bootbus, "ranges", &len);
+ if (!ranges || len < (5 * 8 * sizeof(__be32)))
+ goto no_led;
+
+ ranges[(cs * 5) + 2] = cpu_to_be32(region_base >> 32);
+ ranges[(cs * 5) + 3] = cpu_to_be32(region_base & 0xffffffff);
+ ranges[(cs * 5) + 4] = cpu_to_be32(region_size);
+ goto end_led;
+
+no_led:
+ fdt_nop_node(initial_boot_params, led);
+end_led:
+ ;
+ }
+
+ /* OHCI/UHCI USB */
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ "uctl", NULL);
+ if (alias_prop) {
+ int uctl = fdt_path_offset(initial_boot_params, alias_prop);
+
+ if (uctl >= 0 && (!OCTEON_IS_MODEL(OCTEON_CN6XXX) ||
+ octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC2E)) {
+ pr_debug("Deleting uctl\n");
+ fdt_nop_node(initial_boot_params, uctl);
+ fdt_nop_property(initial_boot_params, aliases, "uctl");
+ } else if (octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC10E ||
+ octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC4E) {
+ /* Missing "refclk-type" defaults to crystal. */
+ fdt_nop_property(initial_boot_params, uctl, "refclk-type");
+ }
+ }
+
+ return 0;
+}
+
+static int __init octeon_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, octeon_ids, NULL);
+}
+device_initcall(octeon_publish_devices);
+
MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Platform driver for Octeon SOC");
diff --git a/arch/mips/cavium-octeon/octeon_3xxx.dts b/arch/mips/cavium-octeon/octeon_3xxx.dts
new file mode 100644
index 000000000000..f28b2d0fde22
--- /dev/null
+++ b/arch/mips/cavium-octeon/octeon_3xxx.dts
@@ -0,0 +1,571 @@
+/dts-v1/;
+/*
+ * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
+ *
+ * This device tree is pruned and patched by early boot code before
+ * use. Because of this, it contains a super-set of the available
+ * devices and properties.
+ */
+/ {
+ compatible = "cavium,octeon-3860";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&ciu>;
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges; /* Direct mapping */
+
+ ciu: interrupt-controller@1070000000000 {
+ compatible = "cavium,octeon-3860-ciu";
+ interrupt-controller;
+ /* Interrupts are specified by two parts:
+ * 1) Controller register (0 or 1)
+ * 2) Bit within the register (0..63)
+ */
+ #interrupt-cells = <2>;
+ reg = <0x10700 0x00000000 0x0 0x7000>;
+ };
+
+ gpio: gpio-controller@1070000000800 {
+ #gpio-cells = <2>;
+ compatible = "cavium,octeon-3860-gpio";
+ reg = <0x10700 0x00000800 0x0 0x100>;
+ gpio-controller;
+ /* Interrupts are specified by two parts:
+ * 1) GPIO pin number (0..15)
+ * 2) Triggering (1 - edge rising
+ * 2 - edge falling
+ * 4 - level active high
+ * 8 - level active low)
+ */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* The GPIO pin connect to 16 consecutive CUI bits */
+ interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+ <0 20>, <0 21>, <0 22>, <0 23>,
+ <0 24>, <0 25>, <0 26>, <0 27>,
+ <0 28>, <0 29>, <0 30>, <0 31>;
+ };
+
+ smi0: mdio@1180000001800 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00001800 0x0 0x40>;
+
+ phy0: ethernet-phy@0 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+
+ phy6: ethernet-phy@6 {
+ reg = <6>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy9: ethernet-phy@9 {
+ reg = <9>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi1: mdio@1180000001900 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00001900 0x0 0x40>;
+
+ phy100: ethernet-phy@1 {
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy101: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy102: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy103: ethernet-phy@4 {
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ };
+
+ mix0: ethernet@1070000100000 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000000 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <0>;
+ interrupts = <0 62>, <1 46>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy0>;
+ };
+
+ mix1: ethernet@1070000100800 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000800 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <1>;
+ interrupts = <1 18>, < 1 46>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy1>;
+ };
+
+ pip: pip@11800a0000000 {
+ compatible = "cavium,octeon-3860-pip";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+ interface@0 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy2>;
+ cavium,alt-phy-handle = <&phy100>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy3>;
+ cavium,alt-phy-handle = <&phy101>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy4>;
+ cavium,alt-phy-handle = <&phy102>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy5>;
+ cavium,alt-phy-handle = <&phy103>;
+ };
+ ethernet@4 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x4>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@5 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x5>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@6 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x6>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@7 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x7>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@8 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x8>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@9 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x9>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@a {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xa>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@b {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xb>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@c {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xc>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@d {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xd>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@e {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xe>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@f {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xf>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ interface@1 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy6>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy7>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy8>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy9>;
+ };
+ };
+ };
+
+ twsi0: i2c@1180000001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001000 0x0 0x200>;
+ interrupts = <0 45>;
+ clock-frequency = <100000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ tmp@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+ };
+
+ twsi1: i2c@1180000001200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001200 0x0 0x200>;
+ interrupts = <0 59>;
+ clock-frequency = <100000>;
+ };
+
+ uart0: serial@1180000000800 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000800 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <0 34>;
+ };
+
+ uart1: serial@1180000000c00 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000c00 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <0 35>;
+ };
+
+ uart2: serial@1180000000400 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000400 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <1 16>;
+ };
+
+ bootbus: bootbus@1180000000000 {
+ compatible = "cavium,octeon-3860-bootbus";
+ reg = <0x11800 0x00000000 0x0 0x200>;
+ /* The chip select number and offset */
+ #address-cells = <2>;
+ /* The size of the chip select region */
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x1f400000 0xc00000>,
+ <1 0 0x10000 0x30000000 0>,
+ <2 0 0x10000 0x40000000 0>,
+ <3 0 0x10000 0x50000000 0>,
+ <4 0 0x0 0x1d020000 0x10000>,
+ <5 0 0x0 0x1d040000 0x10000>,
+ <6 0 0x0 0x1d050000 0x10000>,
+ <7 0 0x10000 0x90000000 0>;
+
+ cavium,cs-config@0 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <0>;
+ cavium,t-adr = <20>;
+ cavium,t-ce = <60>;
+ cavium,t-oe = <60>;
+ cavium,t-we = <45>;
+ cavium,t-rd-hld = <35>;
+ cavium,t-wr-hld = <45>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <0>;
+ cavium,t-page = <35>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@4 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <4>;
+ cavium,t-adr = <320>;
+ cavium,t-ce = <320>;
+ cavium,t-oe = <320>;
+ cavium,t-we = <320>;
+ cavium,t-rd-hld = <320>;
+ cavium,t-wr-hld = <320>;
+ cavium,t-pause = <320>;
+ cavium,t-wait = <320>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@5 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <5>;
+ cavium,t-adr = <5>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <125>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <30>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <30>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <16>;
+ };
+ cavium,cs-config@6 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <6>;
+ cavium,t-adr = <5>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <270>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <70>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <0>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,wait-mode;
+ cavium,bus-width = <16>;
+ };
+
+ flash0: nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ led0: led-display@4,0 {
+ compatible = "avago,hdsp-253x";
+ reg = <4 0x20 0x20>, <4 0 0x20>;
+ };
+
+ cf0: compact-flash@5,0 {
+ compatible = "cavium,ebt3000-compact-flash";
+ reg = <5 0 0x10000>, <6 0 0x10000>;
+ cavium,bus-width = <16>;
+ cavium,true-ide;
+ cavium,dma-engine-handle = <&dma0>;
+ };
+ };
+
+ dma0: dma-engine@1180000000100 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000100 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+ dma1: dma-engine@1180000000108 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000108 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+
+ uctl: uctl@118006f000000 {
+ compatible = "cavium,octeon-6335-uctl";
+ reg = <0x11800 0x6f000000 0x0 0x100>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <12000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+
+ ehci@16f0000000000 {
+ compatible = "cavium,octeon-6335-ehci","usb-ehci";
+ reg = <0x16f00 0x00000000 0x0 0x100>;
+ interrupts = <0 56>;
+ big-endian-regs;
+ };
+ ohci@16f0000000400 {
+ compatible = "cavium,octeon-6335-ohci","usb-ohci";
+ reg = <0x16f00 0x00000400 0x0 0x100>;
+ interrupts = <0 56>;
+ big-endian-regs;
+ };
+ };
+ };
+
+ aliases {
+ mix0 = &mix0;
+ mix1 = &mix1;
+ pip = &pip;
+ smi0 = &smi0;
+ smi1 = &smi1;
+ twsi0 = &twsi0;
+ twsi1 = &twsi1;
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ flash0 = &flash0;
+ cf0 = &cf0;
+ uctl = &uctl;
+ led0 = &led0;
+ };
+ };
diff --git a/arch/mips/cavium-octeon/octeon_68xx.dts b/arch/mips/cavium-octeon/octeon_68xx.dts
new file mode 100644
index 000000000000..1839468932b6
--- /dev/null
+++ b/arch/mips/cavium-octeon/octeon_68xx.dts
@@ -0,0 +1,625 @@
+/dts-v1/;
+/*
+ * OCTEON 68XX device tree skeleton.
+ *
+ * This device tree is pruned and patched by early boot code before
+ * use. Because of this, it contains a super-set of the available
+ * devices and properties.
+ */
+/ {
+ compatible = "cavium,octeon-6880";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&ciu2>;
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges; /* Direct mapping */
+
+ ciu2: interrupt-controller@1070100000000 {
+ compatible = "cavium,octeon-6880-ciu2";
+ interrupt-controller;
+ /* Interrupts are specified by two parts:
+ * 1) Controller register (0 or 7)
+ * 2) Bit within the register (0..63)
+ */
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x10701 0x00000000 0x0 0x4000000>;
+ };
+
+ gpio: gpio-controller@1070000000800 {
+ #gpio-cells = <2>;
+ compatible = "cavium,octeon-3860-gpio";
+ reg = <0x10700 0x00000800 0x0 0x100>;
+ gpio-controller;
+ /* Interrupts are specified by two parts:
+ * 1) GPIO pin number (0..15)
+ * 2) Triggering (1 - edge rising
+ * 2 - edge falling
+ * 4 - level active high
+ * 8 - level active low)
+ */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* The GPIO pins connect to 16 consecutive CUI bits */
+ interrupts = <7 0>, <7 1>, <7 2>, <7 3>,
+ <7 4>, <7 5>, <7 6>, <7 7>,
+ <7 8>, <7 9>, <7 10>, <7 11>,
+ <7 12>, <7 13>, <7 14>, <7 15>;
+ };
+
+ smi0: mdio@1180000003800 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003800 0x0 0x40>;
+
+ phy0: ethernet-phy@6 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <6>;
+ };
+
+ phy1: ethernet-phy@1 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy2: ethernet-phy@2 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy3: ethernet-phy@3 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy4: ethernet-phy@4 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi1: mdio@1180000003880 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003880 0x0 0x40>;
+
+ phy41: ethernet-phy@1 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy42: ethernet-phy@2 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy43: ethernet-phy@3 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy44: ethernet-phy@4 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi2: mdio@1180000003900 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003900 0x0 0x40>;
+
+ phy21: ethernet-phy@1 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy22: ethernet-phy@2 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy23: ethernet-phy@3 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy24: ethernet-phy@4 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi3: mdio@1180000003980 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003980 0x0 0x40>;
+
+ phy11: ethernet-phy@1 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy12: ethernet-phy@2 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy13: ethernet-phy@3 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy14: ethernet-phy@4 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ mix0: ethernet@1070000100000 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000000 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <0>;
+ interrupts = <6 40>, <6 32>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy0>;
+ };
+
+ pip: pip@11800a0000000 {
+ compatible = "cavium,octeon-3860-pip";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+ interface@4 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy1>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy2>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy3>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy4>;
+ };
+ };
+
+ interface@3 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy11>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy12>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy13>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy14>;
+ };
+ };
+
+ interface@2 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;