diff options
123 files changed, 6302 insertions, 448 deletions
diff --git a/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt b/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt new file mode 100644 index 000000000000..f7514c170a32 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt @@ -0,0 +1,10 @@ +* ARM Juno R1 PCIe interface + +This PCIe host controller is based on PLDA XpressRICH3-AXI IP +and thus inherits all the common properties defined in plda,xpressrich3-axi.txt +as well as the base properties defined in host-generic-pci.txt. + +Required properties: + - compatible: "arm,juno-r1-pcie" + - dma-coherent: The host controller bridges the AXI transactions into PCIe bus + in a manner that makes the DMA operations to appear coherent to the CPUs. diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt new file mode 100644 index 000000000000..f3f75bfb42bc --- /dev/null +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt @@ -0,0 +1,12 @@ +* PLDA XpressRICH3-AXI host controller + +The PLDA XpressRICH3-AXI host controller can be configured in a manner that +makes it compliant with the SBSA[1] standard published by ARM Ltd. For those +scenarios, the host-generic-pci.txt bindings apply with the following additions +to the compatible property: + +Required properties: + - compatible: should contain "plda,xpressrich3-axi" to identify the IP used. + + +[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt new file mode 100644 index 000000000000..36d881c8e6d4 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -0,0 +1,68 @@ +* AppliedMicro X-Gene v1 PCIe MSI controller + +Required properties: + +- compatible: should be "apm,xgene1-msi" to identify + X-Gene v1 PCIe MSI controller block. +- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node +- reg: physical base address (0x79000000) and length (0x900000) for controller + registers. These registers include the MSI termination address and data + registers as well as the MSI interrupt status registers. +- reg-names: not required +- interrupts: A list of 16 interrupt outputs of the controller, starting from + interrupt number 0x10 to 0x1f. +- interrupt-names: not required + +Each PCIe node needs to have property msi-parent that points to msi controller node + +Examples: + +SoC DTSI: + + + MSI node: + msi@79000000 { + compatible = "apm,xgene1-msi"; + msi-controller; + reg = <0x00 0x79000000 0x0 0x900000>; + interrupts = <0x0 0x10 0x4> + <0x0 0x11 0x4> + <0x0 0x12 0x4> + <0x0 0x13 0x4> + <0x0 0x14 0x4> + <0x0 0x15 0x4> + <0x0 0x16 0x4> + <0x0 0x17 0x4> + <0x0 0x18 0x4> + <0x0 0x19 0x4> + <0x0 0x1a 0x4> + <0x0 0x1b 0x4> + <0x0 0x1c 0x4> + <0x0 0x1d 0x4> + <0x0 0x1e 0x4> + <0x0 0x1f 0x4>; + }; + + + PCIe controller node with msi-parent property pointing to MSI node: + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + msi-parent= <&msi>; + }; diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index 29fe0bfae38e..8a49362dea6e 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -167,6 +167,13 @@ Optional property: by means of sensor ID. Additional coefficients are interpreted as constant offset. +- sustainable-power: An estimate of the sustainable power (in mW) that the + Type: unsigned thermal zone can dissipate at the desired + Size: one cell control temperature. For reference, the + sustainable power of a 4'' phone is typically + 2000mW, while on a 10'' tablet is around + 4500mW. + Note: The delay properties are bound to the maximum dT/dt (temperature derivative over time) in two situations for a thermal zone: (i) - when passive cooling is activated (polling-delay-passive); and @@ -546,6 +553,8 @@ thermal-zones { */ coefficients = <1200 -345 890>; + sustainable-power = <2500>; + trips { /* Trips are based on resulting linear equation */ cpu_trip: cpu-trip { diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 80339192c93e..e2b67808fdcd 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -149,6 +149,7 @@ pericom Pericom Technology Inc. phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd plathome Plat'Home Co., Ltd. +plda PLDA pixcir PIXCIR MICROELECTRONICS Co., Ltd powervr PowerVR (deprecated, use img) qca Qualcomm Atheros, Inc. diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.txt index 753e47cc2e20..71653584cd03 100644 --- a/Documentation/thermal/cpu-cooling-api.txt +++ b/Documentation/thermal/cpu-cooling-api.txt @@ -36,8 +36,162 @@ the user. The registration APIs returns the cooling device pointer. np: pointer to the cooling device device tree node clip_cpus: cpumask of cpus where the frequency constraints will happen. -1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) +1.1.3 struct thermal_cooling_device *cpufreq_power_cooling_register( + const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) + +Similar to cpufreq_cooling_register, this function registers a cpufreq +cooling device. Using this function, the cooling device will +implement the power extensions by using a simple cpu power model. The +cpus must have registered their OPPs using the OPP library. + +The additional parameters are needed for the power model (See 2. Power +models). "capacitance" is the dynamic power coefficient (See 2.1 +Dynamic power). "plat_static_func" is a function to calculate the +static power consumed by these cpus (See 2.2 Static power). + +1.1.4 struct thermal_cooling_device *of_cpufreq_power_cooling_register( + struct device_node *np, const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) + +Similar to cpufreq_power_cooling_register, this function register a +cpufreq cooling device with power extensions using the device tree +information supplied by the np parameter. + +1.1.5 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) This interface function unregisters the "thermal-cpufreq-%x" cooling device. cdev: Cooling device pointer which has to be unregistered. + +2. Power models + +The power API registration functions provide a simple power model for +CPUs. The current power is calculated as dynamic + (optionally) +static power. This power model requires that the operating-points of +the CPUs are registered using the kernel's opp library and the +`cpufreq_frequency_table` is assigned to the `struct device` of the +cpu. If you are using CONFIG_CPUFREQ_DT then the +`cpufreq_frequency_table` should already be assigned to the cpu +device. + +The `plat_static_func` parameter of `cpufreq_power_cooling_register()` +and `of_cpufreq_power_cooling_register()` is optional. If you don't +provide it, only dynamic power will be considered. + +2.1 Dynamic power + +The dynamic power consumption of a processor depends on many factors. +For a given processor implementation the primary factors are: + +- The time the processor spends running, consuming dynamic power, as + compared to the time in idle states where dynamic consumption is + negligible. Herein we refer to this as 'utilisation'. +- The voltage and frequency levels as a result of DVFS. The DVFS + level is a dominant factor governing power consumption. +- In running time the 'execution' behaviour (instruction types, memory + access patterns and so forth) causes, in most cases, a second order + variation. In pathological cases this variation can be significant, + but typically it is of a much lesser impact than the factors above. + +A high level dynamic power consumption model may then be represented as: + +Pdyn = f(run) * Voltage^2 * Frequency * Utilisation + +f(run) here represents the described execution behaviour and its +result has a units of Watts/Hz/Volt^2 (this often expressed in +mW/MHz/uVolt^2) + +The detailed behaviour for f(run) could be modelled on-line. However, +in practice, such an on-line model has dependencies on a number of +implementation specific processor support and characterisation +factors. Therefore, in initial implementation that contribution is +represented as a constant coefficient. This is a simplification +consistent with the relative contribution to overall power variation. + +In this simplified representation our model becomes: + +Pdyn = Capacitance * Voltage^2 * Frequency * Utilisation + +Where `capacitance` is a constant that represents an indicative +running time dynamic power coefficient in fundamental units of +mW/MHz/uVolt^2. Typical values for mobile CPUs might lie in range +from 100 to 500. For reference, the approximate values for the SoC in +ARM's Juno Development Platform are 530 for the Cortex-A57 cluster and +140 for the Cortex-A53 cluster. + + +2.2 Static power + +Static leakage power consumption depends on a number of factors. For a +given circuit implementation the primary factors are: + +- Time the circuit spends in each 'power state' +- Temperature +- Operating voltage +- Process grade + +The time the circuit spends in each 'power state' for a given +evaluation period at first order means OFF or ON. However, +'retention' states can also be supported that reduce power during +inactive periods without loss of context. + +Note: The visibility of state entries to the OS can vary, according to +platform specifics, and this can then impact the accuracy of a model +based on OS state information alone. It might be possible in some +cases to extract more accurate information from system resources. + +The temperature, operating voltage and process 'grade' (slow to fast) +of the circuit are all significant factors in static leakage power +consumption. All of these have complex relationships to static power. + +Circuit implementation specific factors include the chosen silicon +process as well as the type, number and size of transistors in both +the logic gates and any RAM elements included. + +The static power consumption modelling must take into account the +power managed regions that are implemented. Taking the example of an +ARM processor cluster, the modelling would take into account whether +each CPU can be powered OFF separately or if only a single power +region is implemented for the complete cluster. + +In one view, there are others, a static power consumption model can +then start from a set of reference values for each power managed +region (e.g. CPU, Cluster/L2) in each state (e.g. ON, OFF) at an +arbitrary process grade, voltage and temperature point. These values +are then scaled for all of the following: the time in each state, the +process grade, the current temperature and the operating voltage. +However, since both implementation specific and complex relationships +dominate the estimate, the appropriate interface to the model from the +cpu cooling device is to provide a function callback that calculates +the static power in this platform. When registering the cpu cooling +device pass a function pointer that follows the `get_static_t` +prototype: + + int plat_get_static(cpumask_t *cpumask, int interval, + unsigned long voltage, u32 &power); + +`cpumask` is the cpumask of the cpus involved in the calculation. +`voltage` is the voltage at which they are operating. The function +should calculate the average static power for the last `interval` +milliseconds. It returns 0 on success, -E* on error. If it +succeeds, it should store the static power in `power`. Reading the +temperature of the cpus described by `cpumask` is left for +plat_get_static() to do as the platform knows best which thermal +sensor is closest to the cpu. + +If `plat_static_func` is NULL, static power is considered to be +negligible for this platform and only dynamic power is considered. + +The platform specific callback can then use any combination of tables +and/or equations to permute the estimated value. Process grade +information is not passed to the model since access to such data, from +on-chip measurement capability or manufacture time data, is platform +specific. + +Note: the significance of static power for CPUs in comparison to +dynamic power is highly dependent on implementation. Given the +potential complexity in implementation, the importance and accuracy of +its inclusion when using cpu cooling devices should be assessed on a +case by case basis. + diff --git a/Documentation/thermal/power_allocator.txt b/Documentation/thermal/power_allocator.txt new file mode 100644 index 000000000000..c3797b529991 --- /dev/null +++ b/Documentation/thermal/power_allocator.txt @@ -0,0 +1,247 @@ +Power allocator governor tunables +================================= + +Trip points +----------- + +The governor requires the following two passive trip points: + +1. "switch on" trip point: temperature above which the governor + control loop starts operating. This is the first passive trip + point of the thermal zone. + +2. "desired temperature" trip point: it should be higher than the + "switch on" trip point. This the target temperature the governor + is controlling for. This is the last passive trip point of the + thermal zone. + +PID Controller +-------------- + +The power allocator governor implements a +Proportional-Integral-Derivative controller (PID controller) with +temperature as the control input and power as the controlled output: + + P_max = k_p * e + k_i * err_integral + k_d * diff_err + sustainable_power + +where + e = desired_temperature - current_temperature + err_integral is the sum of previous errors + diff_err = e - previous_error + +It is similar to the one depicted below: + + k_d + | +current_temp | + | v + | +----------+ +---+ + | +----->| diff_err |-->| X |------+ + | | +----------+ +---+ | + | | | tdp actor + | | k_i | | get_requested_power() + | | | | | | | + | | | | | | | ... + v | v v v v v + +---+ | +-------+ +---+ +---+ +---+ +----------+ + | S |-------+----->| sum e |----->| X |--->| S |-->| S |-->|power | + +---+ | +-------+ +---+ +---+ +---+ |allocation| + ^ | ^ +----------+ + | | | | | + | | +---+ | | | + | +------->| X |-------------------+ v v + | +---+ granted performance +desired_temperature ^ + | + | + k_po/k_pu + +Sustainable power +----------------- + +An estimate of the sustainable dissipatable power (in mW) should be +provided while registering the thermal zone. This estimates the +sustained power that can be dissipated at the desired control +temperature. This is the maximum sustained power for allocation at +the desired maximum temperature. The actual sustained power can vary +for a number of reasons. The closed loop controller will take care of +variations such as environmental conditions, and some factors related +to the speed-grade of the silicon. `sustainable_power` is therefore +simply an estimate, and may be tuned to affect the aggressiveness of +the thermal ramp. For reference, the sustainable power of a 4" phone +is typically 2000mW, while on a 10" tablet is around 4500mW (may vary +depending on screen size). + +If you are using device tree, do add it as a property of the +thermal-zone. For example: + + thermal-zones { + soc_thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <2500>; + ... + +Instead, if the thermal zone is registered from the platform code, pass a +`thermal_zone_params` that has a `sustainable_power`. If no +`thermal_zone_params` were being passed, then something like below +will suffice: + + static const struct thermal_zone_params tz_params = { + .sustainable_power = 3500, + }; + +and then pass `tz_params` as the 5th parameter to +`thermal_zone_device_register()` + +k_po and k_pu +------------- + +The implementation of the PID controller in the power allocator +thermal governor allows the configuration of two proportional term +constants: `k_po` and `k_pu`. `k_po` is the proportional term +constant during temperature overshoot periods (current temperature is +above "desired temperature" trip point). Conversely, `k_pu` is the +proportional term constant during temperature undershoot periods +(current temperature below "desired temperature" trip point). + +These controls are intended as the primary mechanism for configuring +the permitted thermal "ramp" of the system. For instance, a lower +`k_pu` value will provide a slower ramp, at the cost of capping +available capacity at a low temperature. On the other hand, a high +value of `k_pu` will result in the governor granting very high power +whilst temperature is low, and may lead to temperature overshooting. + +The default value for `k_pu` is: + + 2 * sustainable_power / (desired_temperature - switch_on_temp) + +This means that at `switch_on_temp` the output of the controller's +proportional term will be 2 * `sustainable_power`. The default value +for `k_po` is: + + sustainable_power / (desired_temperature - switch_on_temp) + +Focusing on the proportional and feed forward values of the PID +controller equation we have: + + P_max = k_p * e + sustainable_power + +The proportional term is proportional to the difference between the +desired temperature and the current one. When the current temperature +is the desired one, then the proportional component is zero and +`P_max` = `sustainable_power`. That is, the system should operate in +thermal equilibrium under constant load. `sustainable_power` is only +an estimate, which is the reason for closed-loop control such as this. + +Expanding `k_pu` we get: + P_max = 2 * sustainable_power * (T_set - T) / (T_set - T_on) + + sustainable_power + +where + T_set is the desired temperature + T is the current temperature + T_on is the switch on temperature + +When the current temperature is the switch_on temperature, the above +formula becomes: + + P_max = 2 * sustainable_power * (T_set - T_on) / (T_set - T_on) + + sustainable_power = 2 * sustainable_power + sustainable_power = + 3 * sustainable_power + +Therefore, the proportional term alone linearly decreases power from +3 * `sustainable_power` to `sustainable_power` as the temperature +rises from the switch on temperature to the desired temperature. + +k_i and integral_cutoff +----------------------- + +`k_i` configures the PID loop's integral term constant. This term +allows the PID controller to compensate for long term drift and for +the quantized nature of the output control: cooling devices can't set +the exact power that the governor requests. When the temperature +error is below `integral_cutoff`, errors are accumulated in the +integral term. This term is then multiplied by `k_i` and the result +added to the output of the controller. Typically `k_i` is set low (1 +or 2) and `integral_cutoff` is 0. + +k_d +--- + +`k_d` configures the PID loop's derivative term constant. It's +recommended to leave it as the default: 0. + +Cooling device power API +======================== + +Cooling devices controlled by this governor must supply the additional +"power" API in their `cooling_device_ops`. It consists on three ops: + +1. int get_requested_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *power); +@cdev: The `struct thermal_cooling_device` pointer +@tz: thermal zone in which we are currently operating +@power: pointer in which to store the calculated power + +`get_requested_power()` calculates the power requested by the device +in milliwatts and stores it in @power . It should return 0 on +success, -E* on failure. This is currently used by the power +allocator governor to calculate how much power to give to each cooling +device. + +2. int state2power(struct thermal_cooling_device *cdev, struct + thermal_zone_device *tz, unsigned long state, u32 *power); +@cdev: The `struct thermal_cooling_device` pointer +@tz: thermal zone in which we are currently operating +@state: A cooling device state +@power: pointer in which to store the equivalent power + +Convert cooling device state @state into power consumption in +milliwatts and store it in @power. It should return 0 on success, -E* +on failure. This is currently used by thermal core to calculate the +maximum power that an actor can consume. + +3. int power2state(struct thermal_cooling_device *cdev, u32 power, + unsigned long *state); +@cdev: The `struct thermal_cooling_device` pointer +@power: power in milliwatts +@state: pointer in which to store the resulting state + +Calculate a cooling device state that would make the device consume at +most @power mW and store it in @state. It should return 0 on success, +-E* on failure. This is currently used by the thermal core to convert +a given power set by the power allocator governor to a state that the +cooling device can set. It is a function because this conversion may +depend on external factors that may change so this function should the +best conversion given "current circumstances". + +Cooling device weights +---------------------- + +Weights are a mechanism to bias the allocation among cooling +devices. They express the relative power efficiency of different +cooling devices. Higher weight can be used to express higher power +efficiency. Weighting is relative such that if each cooling device +has a weight of one they are considered equal. This is particularly +useful in heterogeneous systems where two cooling devices may perform +the same kind of compute, but with different efficiency. For example, +a system with two different types of processors. + +If the thermal zone is registered using +`thermal_zone_device_register()` (i.e., platform code), then weights +are passed as part of the thermal zone's `thermal_bind_parameters`. +If the platform is registered using device tree, then they are passed +as the `contribution` property of each map in the `cooling-maps` node. + +Limitations of the power allocator governor +=========================================== + +The power allocator governor's PID controller works best if there is a +periodic tick. If you have a driver that calls +`thermal_zone_device_update()` (or anything that ends up calling the +governor's `throttle()` function) repetitively, the governor response +won't be very good. Note that this is not particular to this +governor, step-wise will also misbehave if you call its throttle() +faster than the normal thermal framework tick (due to interrupts for +example) as it will overreact. diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 87519cb379ee..c1f6864a8c5d 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -95,7 +95,7 @@ temperature) and throttle appropriate devices. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev, - unsigned long upper, unsigned long lower); + unsigned long upper, unsigned long lower, unsigned int weight); This interface function bind a thermal cooling device to the certain trip point of a thermal zone device. @@ -110,6 +110,8 @@ temperature) and throttle appropriate devices. lower:the Minimum cooling state can be used for this trip point. THERMAL_NO_LIMIT means no lower limit, and the cooling device can be in cooling state 0. + weight: the influence of this cooling device in this thermal + zone. See 1.4.1 below for more information. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev); @@ -127,9 +129,15 @@ temperature) and throttle appropriate devices. This structure defines the following parameters that are used to bind a zone with a cooling device for a particular trip point. .cdev: The cooling device pointer - .weight: The 'influence' of a particular cooling device on this zone. - This is on a percentage scale. The sum of all these weights - (for a particular zone) cannot exceed 100. + .weight: The 'influence' of a particular cooling device on this + zone. This is relative to the rest of the cooling + devices. For example, if all cooling devices have a + weight of 1, then they all contribute the same. You can + use percentages if you want, but it's not mandatory. A + weight of 0 means that this cooling device doesn't + contribute to the cooling of this zone unless all cooling + devices have a weight of 0. If all weights are 0, then + they all contribute the same. .trip_mask:This is a bit mask that gives the binding relation between this thermal zone and cdev, for a particular trip point. If nth bit is set, then the cdev and thermal zone are bound @@ -176,6 +184,14 @@ Thermal zone device sys I/F, created once it's registered: |---trip_point_[0-*]_type: Trip point type |---trip_point_[0-*]_hyst: Hysteresis value for this trip point |---emul_temp: Emulated temperature set node + |---sustainable_power: Sustainable dissipatable power + |---k_po: Proportional term during temperature overshoot + |---k_pu: Proportional term during temperature undershoot + |---k_i: PID's integral term in the power allocator gov + |---k_d: PID's derivative term in the power allocator + |---integral_cutoff: Offset above which errors are accumulated + |---slope: Slope constant applied as linear extrapolation + |---offset: Offset constant applied as linear extrapolation Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: @@ -192,6 +208,8 @@ thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device. /sys/class/thermal/thermal_zone[0-*]: |---cdev[0-*]: [0-*]th cooling device in current thermal zone |---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with + |---cdev[0-*]_weight: Influence of the cooling device in + this thermal zone Besides the thermal zone device sysfs I/F and cooling device sysfs I/F, the generic thermal driver also creates a hwmon sysfs I/F for each _type_ @@ -265,6 +283,14 @@ cdev[0-*]_trip_point point. RO, Optional +cdev[0-*]_weight + The influence of cdev[0-*] in this thermal zone. This value + is relative to the rest of cooling devices in the thermal + zone. For example, if a cooling device has a weight double + than that of other, it's twice as effective in cooling the + thermal zone. + RW, Optional + passive Attribute is only present for zones in which the passive cooling policy is not supported by native thermal driver. Default is zero @@ -289,6 +315,66 @@ emul_temp because userland can easily disable the thermal policy by simply flooding this sysfs node with low temperature values. +sustainable_power + An estimate of the sustained power that can be dissipated by + the thermal zone. Used by the power allocator governor. For + more information see Documentation/thermal/power_allocator.txt + Unit: milliwatts + RW, Optional + +k_po + The proportional term of the power allocator governor's PID + controller during temperature overshoot. Temperature overshoot + is when the current temperature is above the "desired + temperature" trip point. For more information see + Documentation/thermal/power_allocator.txt + RW, Optional + +k_pu + The proportional term of the power allocator governor's PID + controller during temperature undershoot. Temperature undershoot + is when the current temperature is below the "desired + temperature" trip point. For more information see + Documentation/thermal/power_allocator.txt + RW, Optional + +k_i + The integral term of the power allocator governor's PID + controller. This term allows the PID controller to compensate + for long term drift. For more information see + Documentation/thermal/power_allocator.txt + RW, Optional + +k_d + The derivative term of the power allocator governor's PID + controller. For more information see + Documentation/thermal/power_allocator.txt + RW, Optional + +integral_cutoff + Temperature offset from the desired temperature trip point + above which the integral term of the power allocator + governor's PID controller starts accumulating errors. For + example, if integral_cutoff is 0, then the integral term only + accumulates error when temperature is above the desired + temperature trip point. For more information see + Documentation/thermal/power_allocator.txt + RW, Optional + +slope + The slope constant used in a linear extrapolation model + to determine a hotspot temperature based off the sensor's + raw readings. It is up to the device driver to determine + the usage of these values. + RW, Optional + +offset + The offset constant used in a linear extrapolation model + to determine a hotspot temperature based off the sensor's + raw readings. It is up to the device driver to determine + the usage of these values. + RW, Optional + ***************************** * Cooling device attributes * ***************************** @@ -318,7 +404,8 @@ passive, active. If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time, it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all. It has one processor and one fan, which are both registered as -thermal_cooling_device. +thermal_cooling_device. Both are considered to have the same +effectiveness in cooling the thermal zone. If the processor is listed in _PSL method, and the fan is listed in _AL0 method, the sys I/F structure will be built like this: @@ -340,8 +427,10 @@ method, the sys I/F structure will be built like this: |---trip_point_3_type: active1 |---cdev0: --->/sys/class/thermal/cooling_device0 |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ + |---cdev0_weight: 1024 |---cdev1: --->/sys/class/thermal/cooling_device3 |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ + |---cdev1_weight: 1024 |cooling_device0: |---type: Processor diff --git a/MAINTAINERS b/MAINTAINERS index d8afd2953678..00411d20525a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7594,6 +7594,14 @@ L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/host/*spear* +PCI MSI DRIVER FOR APPLIEDMICRO XGENE +M: Duc Dang <dhdang@apm.com> +L: linux-pci@vger.kernel.org +L: linux-arm-kernel@lists.infradead.org +S: Maintained +F: Documentation/devicetree/bindings/pci/xgene-pci-msi.txt +F: drivers/pci/host/pci-xgene-msi.c + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 1eb7539aa583..8944f2ab8fd7 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -592,6 +592,20 @@ config FORCE_MAX_ZONEORDER default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE) default "11" +config ARM64_PAN + bool "Enable support for Privileged Access Never (PAN)" + default y + help + Privileged Access Never (PAN; part of the ARMv8.1 Extensions) + prevents the kernel or hypervisor from accessing user-space (EL0) + memory directly. + + Choosing this option will cause any unprotected (not using + copy_to_user et al) memory access to fail with a permission fault. + + The feature is detected at runtime, and will remain as a 'nop' + instruction if the cpu does not implement the feature. + menuconfig ARMV8_DEPRECATED bool "Emulate deprecated/obsolete ARMv8 instructions" depends on COMPAT diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index c8d3e0e86678..d8f3a1c65ecd 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -374,6 +374,28 @@ }; }; + msi: msi@79000000 { + compatible = "apm,xgene1-msi"; + msi-controller; + reg = <0x00 0x79000000 0x0 0x900000>; + interrupts = < 0x0 0x10 0x4 + 0x0 0x11 0x4 + 0x0 0x12 0x4 + 0x0 0x13 0x4 + 0x0 0x14 0x4 + 0x0 0x15 0x4 + 0x0 0x16 0x4 + 0x0 0x17 0x4 + 0x0 0x18 0x4 + 0x0 0x19 0x4 + 0x0 0x1a 0x4 + 0x0 0x1b 0x4 + 0x0 0x1c 0x4 + 0x0 0x1d 0x4 + 0x0 0x1e 0x4 + 0x0 0x1f 0x4>; + }; + pcie0: pcie@1f2b0000 { status = "disabled"; device_type = "pci"; @@ -395,6 +417,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; dma-coherent; clocks = <&pcie0clk 0>; + msi-parent = <&msi>; }; pcie1: pcie@1f2c0000 { @@ -418,6 +441,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>; dma-coherent; clocks = <&pcie1clk 0>; + msi-parent = <&msi>; }; pcie2: pcie@1f2d0000 { @@ -441,6 +465,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>; dma-coherent; clocks = <&pcie2clk 0>; + msi-parent = <&msi>; }; pcie3: pcie@1f500000 { @@ -464,6 +489,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>; dma-coherent; clocks = <&pcie3clk 0>; + msi-parent = <&msi>; }; pcie4: pcie@1f510000 { @@ -487,6 +513,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>; dma-coherent; clocks = <&pcie4clk 0>; + msi-parent = <&msi>; }; serial0: serial@1c020000 { diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 301a0dada1fe..c5c98b91514e 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,5 +1,5 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi new file mode 100644 index 000000000000..e3ee96036eca --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -0,0 +1,154 @@ + /* + * Devices shared by all Juno boards + */ + + memtimer: timer@2a810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x2a810000 0x0 0x10000>; + clock-frequency = <50000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + frame@2a830000 { + frame-number = <1>; + interrupts = <0 60 4>; + reg = <0x0 0x2a830000 0x0 0x10000>; + }; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <2>; + #interrupt-cells = <3>; + #size-cells = <2>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + ranges = <0 0 0 0x2c1c0000 0 0x40000>; + v2m_0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0 0 0x1000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /include/ "juno-clocks.dtsi" + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + soc_uart0: uart@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + dvi0: dvi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + }; + + dvi1: dvi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + }; + }; + + ohci@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + ehci@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + memory@80000000 { + device_type = "memory"; + /* last 16MB of the first memory area is reserved for secure world use by firmware */ + reg = <0x00000000 0x80000000 0x0 0x7f000000>, + <0x00000008 0x80000000 0x1 0x80000000>; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "juno-motherboard.dtsi" + }; diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi index c9b89efe0f56..25352ed943e6 100644 --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -36,9 +36,9 @@ clock-output-names = "apb_pclk"; }; - soc_faxiclk: refclk533mhz { + soc_faxiclk: refclk400mhz { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <533000000>; + clock-frequency = <400000000>; clock-output-names = "faxi_clk"; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts new file mode 100644 index 000000000000..a25964d26bda --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -0,0 +1,136 @@ +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2015 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "ARM Juno development board (r1)"; + compatible = "arm,juno-r1", "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + }; + + A57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A57_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A57_0>, + <&A57_1>, + <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; + + #include "juno-base.dtsi" + + pcie-controller@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, + <0 0 0 2 &gic 0 0 0 137 4>, + <0 0 0 3 &gic 0 0 0 138 4>, + <0 0 0 4 &gic 0 0 0 139 4>; + msi-parent = <&v2m_0>; + }; +}; + +&memtimer { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 5e9110a3353d..d7cbdd482a61 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -91,33 +91,6 @@ }; }; - memory@80000000 { - device_type = "memory"; - /* last 16MB of the first memory area is reserved for secure world use by firmware */ - reg = <0x00000000 0x80000000 0x0 0x7f000000>, - <0x00000008 0x80000000 0x1 0x80000000>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic"; - reg = <0x0 0x2c010000 0 0x1000>, - <0x0 0x2c02f000 0 0x2000>, - <0x0 0x2c04f000 0 0x2000>, - <0x0 0x2c06f000 0 0x2000>; - #address-cells = <0>; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; - }; - pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, @@ -134,105 +107,5 @@ <&A53_3>; }; - /include/ "juno-clocks.dtsi" - - dma@7ff00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0x7ff00000 0 0x1000>; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_faxiclk>; - clock-names = "apb_pclk"; - }; - - soc_uart0: uart@7ff80000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x7ff80000 0x0 0x1000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_uartclk>, <&soc_refclk100mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - i2c@7ffa0000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x7ffa0000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <400000>; - i2c-sda-hold-time-ns = <500>; - clocks = <&soc_smc50mhz>; - - dvi0: dvi-transmitter@70 { - compatible = "nxp,tda998x"; - reg = <0x70>; - }; - - dvi1: dvi-transmitter@71 { - compatible = "nxp,tda998x"; - reg = <0x71>; - }; - }; - - ohci@7ffb0000 { - compatible = "generic-ohci"; - reg = <0x0 0x7ffb0000 0x0 0x10000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_usb48mhz>; - }; - - ehci@7ffc0000 { - compatible = "generic-ehci"; - reg = <0x0 0x7ffc0000 0x0 0x10000>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_usb48mhz>; - }; - - memory-controller@7ffd0000 { - compatible = "arm,pl354", "arm,primecell"; - reg = <0 0x7ffd0000 0 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - }; - - smb { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "juno-motherboard.dtsi" - }; + #include "juno-base.dtsi" }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 2ed7449d9273..e9e4ea5cd339 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -45,6 +45,7 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y CONFIG_PCI_MSI=y +CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_SMP=y CONFIG_PREEMPT=y diff --git a/arch/arm64/include/asm/alternative-asm.h b/arch/arm64/include/asm/alternative-asm.h deleted file mode 100644 index 919a67855b63..000000000000 --- a/arch/arm64/include/asm/alternative-asm.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_ALTERNATIVE_ASM_H -#define __ASM_ALTERNATIVE_ASM_H - -#ifdef __ASSEMBLY__ - -.macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len - .word \orig_offset - . - .word \alt_offset - . - .hword \feature - .byte \orig_len - .byte \alt_len -.endm - -.macro alternative_insn insn1 insn2 cap -661: \insn1 -662: .pushsection .altinstructions, "a" - altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f - .popsection - .pushsection .altinstr_replacement, "ax" -663: \insn2 -664: .popsection - .if ((664b-663b) != (662b-661b)) - .error "Alternatives instruction length mismatch" - .endif -.endm - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ALTERNATIVE_ASM_H */ diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index d261f01e2bae..20367882226c 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -1,6 +1,9 @@ #ifndef __ASM_ALTERNATIVE_H #define __ASM_ALTERNATIVE_H +#ifndef __ASSEMBLY__ + +#include <linux/kconfig.h> #include <linux/types.h> #include <linux/stddef.h> #include <linux/stringify.h> @@ -24,8 +27,22 @@ void free_alternatives_memory(void); " .byte 662b-661b\n" /* source len */ \ " .byte 664f-663f\n" /* replacement len */ -/* alternative assembly primitive: */ -#define ALTERNATIVE(oldinstr, newinstr, feature) \ +/* + * alternative assembly primitive: + * + * If any of these .org directive fail, it means that insn1 and insn2 + * don't have the same length. This used to be written as + * + * .if ((664b-663b) != (662b-661b)) + * .error "Alternatives instruction length mismatch" + * .endif + * + * but most assemblers die if insn1 or insn2 have a .inst. This should + * be fixed in a binutils release posterior to 2.25.51.0.2 (anything + * containing commit 4e4d08cf7399b606 or c1baaddf8861). + */ +#define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled) \ + ".if "__stringify(cfg_enabled)" == 1\n" \ "661:\n\t" \ oldinstr "\n" \ "662:\n" \ @@ -37,8 +54,92 @@ void free_alternatives_memory(void); newinstr "\n" \ "664:\n\t" \ ".popsection\n\t" \ - ".if ((664b-663b) != (662b-661b))\n\t" \ - " .error \"Alternatives instruction length mismatch\"\n\t"\ + ".org . - (664b-663b) + (662b-661b)\n\t" \ + ".org . - (662b-661b) + (664b-663b)\n" \ ".endif\n" +#define _ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg, ...) \ + __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg)) + +#else + +.macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len + .word \orig_offset - . + .word \alt_offset - . + .hword \feature + .byte \orig_len + .byte \alt_len +.endm + +.macro alternative_insn insn1, insn2, cap, enable = 1 + .if \enable +661: \insn1 +662: .pushsection .altinstructions, "a" + altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f + .popsection + .pushsection .altinstr_replacement, "ax" +663: \insn2 +664: .popsection + .org . - (664b-663b) + (662b-661b) + .org . - (662b-661b) + (664b-663b) + .endif +.endm + +/* + * Begin an alternative code sequence. + * + * The code that follows this macro will be assembled and linked as + * normal. There are no restrictions on this code. + */ +.macro alternative_if_not cap + .pushsection .altinstructions, "a" + altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f + .popsection +661: +.endm + +/* + * Provide the alternative code sequence. + * + * The code that follows this macro is assembled into a special + * section to be used for dynamic patching. Code that follows this + * macro must: + * + * 1. Be exactly the same length (in bytes) as the default code + * sequence. + * + * 2. Not contain a branch target that is used outside of the + * alternative sequence it is defined in (branches into an + * alternative sequence are not fixed up). + */ +.macro alternative_else +662: .pushsection .altinstr_replacement, "ax" +663: +.endm + +/* + * Complete an alternative code sequence. + */ +.macro alternative_endif +664: .popsection + .org . - (664b-663b) + (662b-661b) + .org . - (662b-661b) + (664b-663b) +.endm + +#define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...) \ + alternative_insn insn1, insn2, cap, IS_ENABLED(cfg) + + +#endif /* __ASSEMBLY__ */ + +/* + * Usage: asm(ALTERNATIVE(oldinstr, newinstr, feature)); + * + * Usage: asm(ALTERNATIVE(oldinstr, newinstr, feature, CONFIG_FOO)); + * N.B. If CONFIG_FOO is specified, but not selected, the whole block + * will be omitted, including oldinstr. + */ +#define ALTERNATIVE(oldinstr, newinstr, ...) \ + _ALTERNATIVE_CFG(oldinstr, newinstr, __VA_ARGS__, 1) + #endif /* __ASM_ALTERNATIVE_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 82cb9f98ba1a..d71140b76773 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -24,8 +24,10 @@ #define ARM64_WORKAROUND_CLEAN_CACHE 0 #define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1 #define ARM64_WORKAROUND_845719 2 +#define ARM64_HAS_SYSREG_GIC_CPUIF 3 +#define ARM64_HAS_PAN 4 -#define ARM64_NCAPS 3 +#define ARM64_NCAPS 5 #ifndef __ASSEMBLY__ @@ -33,11 +35,17 @@ struct arm64_cpu_capabilities { const char *desc; u16 capability; bool (*matches)(const struct arm64_cpu_capabilities *); + void (*enable)(void); union { struct { /* To be used for erratum handling only */ u32 midr_model; u32 midr_range_min, midr_range_max; }; + + struct { /* Feature register checking */ + int field_pos; + int min_field_value; + }; }; }; @@ -64,6 +72,13 @@ static inline void cpus_set_cap(unsigned int num) __set_bit(num, cpu_hwcaps); } +static inline int __attribute_const__ cpuid_feature_extract_field(u64 features, + int field) +{ + return (s64)(features << (64 - 4 - field)) >> (64 - 4); +} + + void check_cpu_capabilities(const struct arm64_cpu_capabilities *caps, const char *info); void check_local_cpu_errata(void); diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index a84ec605bed8..ee6403df9fe4 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -81,9 +81,6 @@ #define ID_AA64MMFR0_BIGEND(mmfr0) \ (((mmfr0) & ID_AA64MMFR0_BIGEND_MASK) >> ID_AA64MMFR0_BIGEND_SHIFT) -#define SCTLR_EL1_CP15BEN (0x1 << 5) -#define SCTLR_EL1_SED (0x1 << 8) - #ifndef __ASSEMBLY__ /* diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h index 5f750dc96e0f..667346273d9b 100644 --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -20,10 +20,16 @@ #include <linux/futex.h> #include <linux/uaccess.h> + +#include <asm/alternative.h> +#include <asm/cpufeature.h> #include <asm/errno.h> +#include <asm/sysreg.h> #define __futex_atomic_op(insn, ret, oldval, uaddr, tmp, oparg) \ asm volatile( \ + ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) \ "1: ldxr %w1, %2\n" \ insn "\n" \ "2: stlxr %w3, %w0, %2\n" \ @@ -39,6 +45,8 @@ " .align 3\n" \ " .quad 1b, 4b, 2b, 4b\n" \ " .popsection\n" \ + ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) \ : "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp) \ : "r" (oparg), "Ir" (-EFAULT) \ : "memory") diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index d2c37a1df0eb..6c2f5726fe0b 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -169,4 +169,6 @@ static inline void spin_lock_prefetch(const void *x) #endif +void cpu_enable_pan(void); + #endif /* __ASM_PROCESSOR_H */ diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 5c89df0acbcb..a7f3d4b2514d 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -20,8 +20,29 @@ #ifndef __ASM_SYSREG_H #define __ASM_SYSREG_H +#include <asm/opcodes.h> + +#define SCTLR_EL1_CP15BEN (0x1 << 5) +#define SCTLR_EL1_SED (0x1 << 8) + +/* + * ARMv8 ARM reserves the following encoding for system registers: + * (Ref: ARMv8 ARM, Section: "System instruction class encoding overview", + * C5.2, version:ARM DDI 0487A.f) + * [20-19] : Op0 + * [18-16] : Op1 + * [15-12] : CRn + * [11-8] : CRm + * [7-5] : Op2 + */ #define sys_reg(op0, op1, crn, crm, op2) \ - ((((op0)-2)<<19)|((op1)<<16)|((crn)<<12)|((crm)<<8)|((op2)<<5)) + ((((op0)&3)<<19)|((op1)<<16)|((crn)<<12)|((crm)<<8)|((op2)<<5)) + +#define REG_PSTATE_PAN_IMM sys_reg(0, 0, 4, 0, 4) +#define SCTLR_EL1_SPAN (1 << 23) + +#define SET_PSTATE_PAN(x) __inst_arm(0xd5000000 | REG_PSTATE_PAN_IMM |\ + (!!x)<<8 | 0x1f) #ifdef __ASSEMBLY__ @@ -31,11 +52,11 @@ .equ __reg_num_xzr, 31 .macro mrs_s, rt, sreg - .inst 0xd5300000|(\sreg)|(__reg_num_\rt) + .inst 0xd5200000|(\sreg)|(__reg_num_\rt) .endm .macro msr_s, sreg, rt - .inst 0xd5100000|(\sreg)|(__reg_num_\rt) + .inst 0xd5000000|(\sreg)|(__reg_num_\rt) .endm #else @@ -47,14 +68,23 @@ asm( " .equ __reg_num_xzr, 31\n" "\n" " .macro mrs_s, rt, sreg\n" -" .inst 0xd5300000|(\\sreg)|(__reg_num_\\rt)\n" +" .inst 0xd5200000|(\\sreg)|(__reg_num_\\rt)\n" " .endm\n" "\n" " .macro msr_s, sreg, rt\n" -" .inst 0xd5100000|(\\sreg)|(__reg_num_\\rt)\n" +" .inst 0xd5000000|(\\sreg)|(__reg_num_\\rt)\n" " .endm\n" ); +static inline void config_sctlr_el1(u32 clear, u32 set) +{ + u32 val; + + asm volatile("mrs %0, sctlr_el1" : "=r" (val)); + val &= ~clear; + val |= set; + asm volatile("msr sctlr_el1, %0" : : "r" (val)); +} #endif #endif /* __ASM_SYSREG_H */ diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index 07e1ba449bf1..b2ede967fe7d 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -24,7 +24,10 @@ #include <linux/string.h> #include <linux/thread_info.h> +#include <asm/alternative.h> +#include <asm/cpufeature.h> #include <asm/ptrace.h> +#include <asm/sysreg.h> #include <asm/errno.h> #include <asm/memory.h> #include <asm/compiler.h> @@ -131,6 +134,8 @@ static inline void set_fs(mm_segment_t fs) do { \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + asm(ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN)); \ switch (sizeof(*(ptr))) { \ case 1: \ __get_user_asm("ldrb", "%w", __gu_val, (ptr), (err)); \ @@ -148,6 +153,8 @@ do { \ BUILD_BUG(); \ } \ (x) = (__force __typeof__(*(ptr)))__gu_val; \ + asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN)); \ } while (0) #define __get_user(x, ptr) \ @@ -194,6 +201,8 @@ do { \ do { \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + asm(ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN)); \ switch (sizeof(*(ptr))) { \ case 1: \ __put_user_asm("strb", "%w", __pu_val, (ptr), (err)); \ @@ -210,6 +219,8 @@ do { \ default: \ BUILD_BUG(); \ } \ + asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN)); \ } while (0) #define __put_user(x, ptr) \ diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h index 6913643bbe54..208db3df135a 100644 --- a/arch/arm64/include/uapi/asm/ptrace.h +++ b/arch/arm64/include/uapi/asm/ptrace.h @@ -44,6 +44,7 @@ #define PSR_I_BIT 0x00000080 #define PSR_A_BIT 0x00000100 #define PSR_D_BIT 0x00000200 +#define PSR_PAN_BIT 0x00400000 #define PSR_Q_BIT 0x08000000 #define PSR_V_BIT 0x10000000 #define PSR_C_BIT 0x20000000 diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index 7ac3920b1356..937f5e58a4d3 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -14,8 +14,11 @@ #include <linux/slab.h> #include <linux/sysctl.h> +#include <asm/alternative.h> +#include <asm/cpufeature.h> #include <asm/insn.h> #include <asm/opcodes.h> +#include <asm/sysreg.h> #include <asm/system_misc.h> #include <asm/traps.h> #include <asm/uaccess.h> @@ -279,6 +282,8 @@ static void register_insn_emulation_sysctl(struct ctl_table *table) */ #define __user_swpX_asm(data, addr, res, temp, B) \ __asm__ __volatile__( \ + ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) \ "0: ldxr"B" %w2, [%3]\n" \ "1: stxr"B" %w0, %w1, [%3]\n" \ " cbz %w0, 2f\n" \ @@ -297,6 +302,8 @@ static void register_insn_emulation_sysctl(struct ctl_table *table) " .quad 0b, 4b\n" \ " .quad 1b, 4b\n" \ " .popsection\n" \ + ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) \ : "=&r" (res), "+r" (data), "=&r" (temp) \ : "r" (addr), "i" (-EAGAIN), "i" (-EFAULT) \ : "memory") @@ -506,16 +513,6 @@ ret: return 0; } -static inline void config_sctlr_el1(u32 clear, u32 set) -{ - u32 val; - - asm volatile("mrs %0, sctlr_el1" : "=r" (val)); - val &= ~clear; - val |= set; - asm volatile("msr sctlr_el1, %0" : : "r" (val)); -} - static int cp15_barrier_set_hw_mode(bool enable) { if (enable) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 3d9967e43d89..978fa169d3c3 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -21,8 +21,52 @@ #include <linux/types.h> #include <asm/cpu.h> #include <asm/cpufeature.h> +#include <asm/processor.h> + +static bool +feature_matches(u64 reg, const struct arm64_cpu_capabilities *entry) +{ + int val = cpuid_feature_extract_field(reg, entry->field_pos); + + return val >= entry->min_field_value; +} + +static bool +has_id_aa64pfr0_feature(const struct arm64_cpu_capabilities *entry) +{ + u64 val; + + val = read_cpuid(id_aa64pfr0_el1); + return feature_matches(val, entry); +} + +static bool __maybe_unused +has_id_aa64mmfr1_feature(const struct arm64_cpu_capabilities *entry) +{ + u64 val; + + val = read_cpuid(id_aa64mmfr1_el1); + return feature_matches(val, entry); +} static const struct arm64_cpu_capabilities arm64_features[] = { + { + .desc = "GIC system register CPU interface", + .capability = ARM64_HAS_SYSREG_GIC_CPUIF, + .matches = has_id_aa64pfr0_feature, + .field_pos = 24, + .min_field_value = 1, + }, +#ifdef CONFIG_ARM64_PAN + { + .desc = "Privileged Access Never", + .capability = ARM64_HAS_PAN, + .matches = has_id_aa64mmfr1_feature, + .field_pos = 20, + .min_field_value = 1, + .enable = cpu_enable_pan, + }, +#endif /* CONFIG_ARM64_PAN */ {}, }; @@ -39,6 +83,12 @@ void check_cpu_capabilities(const struct arm64_cpu_capabilities *caps, pr_info("%s %s\n", info, caps[i].desc); cpus_set_cap(caps[i].capability); } + + /* second pass allows enable() to consider interacting capabilities */ + for (i = 0; caps[i].desc; i++) { + if (cpus_have_cap(caps[i].capability) && caps[i].enable) + caps[i].enable(); + } } void check_local_cpu_features(void) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index bddd04d031db..3661b12d9b26 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -21,7 +21,7 @@ #include <linux/init.h> #include <linux/linkage.h> -#include <asm/alternative-asm.h> +#include <asm/alternative.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/cpufeature.h> diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S index c17967fdf5f6..a9723c71c52b 100644 --- a/arch/arm64/lib/clear_user.S +++ b/arch/arm64/lib/clear_user.S @@ -16,7 +16,11 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/linkage.h> + +#include <asm/alternative.h> #include <asm/assembler.h> +#include <asm/cpufeature.h> +#include <asm/sysreg.h> .text @@ -29,6 +33,8 @@ * Alignment fixed up by hardware. */ ENTRY(__clear_user) +ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) mov x2, x1 // save the size for fixup return subs x1, x1, #8 b.mi 2f @@ -48,6 +54,8 @@ USER(9f, strh wzr, [x0], #2 ) b.mi 5f USER(9f, strb wzr, [x0] ) 5: mov x0, #0 +ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) ret ENDPROC(__clear_user) diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S index 5e27add9d362..1be9ef27be97 100644 --- a/arch/arm64/lib/copy_from_user.S +++ b/arch/arm64/lib/copy_from_user.S @@ -15,7 +15,11 @@ */ #include <linux/linkage.h> + +#include <asm/alternative.h> #include <asm/assembler.h> +#include <asm/cpufeature.h> +#include <asm/sysreg.h> /* * Copy from user space to a kernel buffer (alignment handled by the hardware) @@ -28,14 +32,21 @@ * x0 - bytes not copied */ ENTRY(__copy_from_user) - add x4, x1, x2 // upper user buffer boundary - subs x2, x2, #8 +ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) + add x5, x1, x2 // upper user buffer boundary + subs x2, x2, #16 + b.mi 1f +0: +USER(9f, ldp x3, x4, [x1], #16) + subs x2, x2, #16 + stp x3, x4, [x0], #16 + b.pl 0b +1: adds x2, x2, #8 b.mi 2f -1: USER(9f, ldr x3, [x1], #8 ) - subs x2, x2, #8 + sub x2, x2, #8 str x3, [x0], #8 - b.pl 1b 2: adds x2, x2, #4 b.mi 3f USER(9f, ldr w3, [x1], #4 ) @@ -51,12 +62,14 @@ USER(9f, ldrh w3, [x1], #2 ) USER(9f, ldrb w3, [x1] ) strb w3, [x0] 5: mov x0, #0 +ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) ret ENDPROC(__copy_from_user) .section .fixup,"ax" .align 2 -9: sub x2, x4, x1 +9: sub x2, x5, x1 mov x3, x2 10: strb wzr, [x0], #1 // zero remaining buffer space subs x3, x3, #1 diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S index 84b6c9bb9b93..1b94661e22b3 100644 --- a/arch/arm64/lib/copy_in_user.S +++ b/arch/arm64/lib/copy_in_user.S @@ -17,7 +17,11 @@ */ #include <linux/linkage.h> + +#include <asm/alternative.h> #include <asm/assembler.h> +#include <asm/cpufeature.h> +#include <asm/sysreg.h> /* * Copy from user space to user space (alignment handled by the hardware) @@ -30,14 +34,21 @@ * x0 - bytes not copied */ ENTRY(__copy_in_user) - add x4, x0, x2 // upper user buffer boundary - subs x2, x2, #8 +ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) + add x5, x0, x2 // upper user buffer boundary + subs x2, x2, #16 + b.mi 1f +0: +USER(9f, ldp x3, x4, [x1], #16) + subs x2, x2, #16 +USER(9f, stp x3, x4, [x0], #16) + b.pl 0b +1: adds x2, x2, #8 b.mi 2f -1: USER(9f, ldr x3, [x1], #8 ) - subs x2, x2, #8 + sub x2, x2, #8 USER(9f, str x3, [x0], #8 ) - b.pl 1b 2: adds x2, x2, #4 b.mi 3f USER(9f, ldr w3, [x1], #4 ) @@ -53,11 +64,13 @@ USER(9f, strh w3, [x0], #2 ) USER(9f, ldrb w3, [x1] ) USER(9f, strb w3, [x0] ) 5: mov x0, #0 +ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) ret ENDPROC(__copy_in_user) .section .fixup,"ax" .align 2 -9: sub x0, x4, x0 // bytes not copied +9: sub x0, x5, x0 // bytes not copied ret .previous diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S index a0aeeb9b7a28..a257b47e2dc4 100644 --- a/arch/arm64/lib/copy_to_user.S +++ b/arch/arm64/lib/copy_to_user.S @@ -15,7 +15,11 @@ */ #include <linux/linkage.h> + +#include <asm/alternative.h> #include <asm/assembler.h> +#include <asm/cpufeature.h> +#include <asm/sysreg.h> /* * Copy to user space from a kernel buffer (alignment handled by the hardware) @@ -28,14 +32,21 @@ * x0 - bytes not copied */ ENTRY(__copy_to_user) - add x4, x0, x2 // upper user buffer boundary - subs x2, x2, #8 +ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) + add x5, x0, x2 // upper user buffer boundary + subs x2, x2, #16 + b.mi 1f +0: + ldp x3, x4, [x1], #16 + subs x2, x2, #16 +USER(9f, stp x3, x4, [x0], #16) + b.pl 0b +1: adds x2, x2, #8 b.mi 2f -1: ldr x3, [x1], #8 - subs x2, x2, #8 + sub x2, x2, #8 USER(9f, str x3, [x0], #8 ) - b.pl 1b 2: adds x2, x2, #4 b.mi 3f ldr w3, [x1], #4 @@ -51,11 +62,13 @@ USER(9f, strh w3, [x0], #2 ) ldrb w3, [x1] USER(9f, strb w3, [x0] ) 5: mov x0, #0 +ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \ + CONFIG_ARM64_PAN) ret ENDPROC(__copy_to_user) .section .fixup,"ax" .align 2 -9: sub x0, x4, x0 // bytes not copied +9: sub x0, x5, x0 // bytes not copied ret .previous diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index 2560e1e1562e..70a79cb6d504 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -22,7 +22,7 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/cpufeature.h> -#include <asm/alternative-asm.h> +#include <asm/alternative.h> #include "proc-macros.S" diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index fa5efaa5c3ac..10a1fc5004dc 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -30,9 +30,11 @@ #include <linux/highmem.h> #include <linux/perf_event.h> +#include <asm/cpufeature.h> #include <asm/exception.h> #include <asm/debug-monitors.h> #include <asm/esr.h> +#include <asm/sysreg.h> #include <asm/system_misc.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> @@ -225,6 +227,13 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, } /* + * PAN bit set implies the fault happened in kernel space, but not + * in the arch's user access functions. + */ + if (IS_ENABLED(CONFIG_ARM64_PAN) && (regs->pstate & PSR_PAN_BIT)) + goto no_context; + + /* * As per x86, we may deadlock here. However, since the kernel only * validly references user space from well defined areas of the code, * we can bug out early if this is from code which shouldn't. @@ -531,3 +540,10 @@ asmlinkage int __exception do_debug_exception(unsigned long addr, return 0; } + +#ifdef CONFIG_ARM64_PAN +void cpu_enable_pan(void) +{ + config_sctlr_el1(SCTLR_EL1_SPAN, 0); +} +#endif /* CONFIG_ARM64_PAN */ diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c index ca3a062ed1b9..11090ab4bf59 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c @@ -123,7 +123,8 @@ cpld_pic_cascade(unsigned int irq, struct irq_desc *desc) } static int -cpld_pic_host_match(struct irq_domain *h, struct device_node *node) +cpld_pic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { return cpld_pic_node == node; } diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 3af8324c122e..a15f1efc295f 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -222,7 +222,8 @@ void iic_request_IPIs(void) #endif /* CONFIG_SMP */ -static int iic_host_match(struct irq_domain *h, struct device_node *node) +static int iic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { return of_device_is_compatible(node, "IBM,CBEA-Internal-Interrupt-Controller"); diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c index 4cde8e7da4b8..b7866e01483d 100644 --- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c @@ -108,7 +108,8 @@ static int flipper_pic_map(struct irq_domain *h, unsigned int virq, return 0; } -static int flipper_pic_match(struct irq_domain *h, struct device_node *np) +static int flipper_pic_match(struct irq_domain *h, struct device_node *np, + enum irq_domain_bus_token bus_token) { return 1; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 59cfc9d63c2d..6f4f8b060def 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -268,7 +268,8 @@ static struct irqaction gatwick_cascade_action = { .name = "cascade", }; -static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node) +static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { /* We match all, we don't always have a node anyway */ return 1; diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c new file mode 100644 index 000000000000..2c91ee7800b9 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-irqchip.c @@ -0,0 +1,254 @@ +/* + * This file implements an irqchip for OPAL events. Whenever there is + * an interrupt that is handled by OPAL we get passed a list of events + * that Linux needs to do something about. These basically look like + * interrupts to Linux so we implement an irqchip to handle them. + * + * Copyright Alistair Popple, IBM Corporation 2014. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/bitops.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/kthread.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/irq_work.h> + +#include <asm/machdep.h> +#include <asm/opal.h> + +#include "powernv.h" + +/* Maximum number of events supported by OPAL firmware */ +#define MAX_NUM_EVENTS 64 + +struct opal_event_irqchip { + struct irq_chip irqchip; + struct irq_domain *domain; + unsigned long mask; +}; +static struct opal_event_irqchip opal_event_irqchip; + +static unsigned int opal_irq_count; +static unsigned int *opal_irqs; + +static void opal_handle_irq_work(struct irq_work *work); +static __be64 last_outstanding_events; +static struct irq_work opal_event_irq_work = { + .func = opal_handle_irq_work, +}; + +static void opal_event_mask(struct irq_data *d) +{ + clear_bit(d->hwirq, &opal_event_irqchip.mask); +} + +static void opal_event_unmask(struct irq_data *d) +{ + set_bit(d->hwirq, &opal_event_irqchip.mask); + + opal_poll_events(&last_outstanding_events); + if (last_outstanding_events & opal_event_irqchip.mask) + /* Need to retrigger the interrupt */ + irq_work_queue(&opal_event_irq_work); +} + +static int opal_event_set_type(struct irq_data *d, unsigned int flow_type) +{ + /* + * For now we only support level triggered events. The irq + * handler will be called continuously until the event has + * been cleared in OPAL. + */ + if (flow_type != IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + + return 0; +} + +static struct opal_event_irqchip opal_event_irqchip = { + .irqchip = { + .name = "OPAL EVT", + .irq_mask = opal_event_mask, + .irq_unmask = opal_event_unmask, + .irq_set_type = opal_event_set_type, + }, + .mask = 0, +}; + +static int opal_event_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, &opal_event_irqchip); + irq_set_chip_and_handler(irq, &opal_event_irqchip.irqchip, + handle_level_irq); + + return 0; +} + +void opal_handle_events(uint64_t events) +{ + int virq, hwirq = 0; + u64 mask = opal_event_irqchip.mask; + + if (!in_irq() && (events & mask)) { + last_outstanding_events = events; + irq_work_queue(&opal_event_irq_work); + return; + } + + while (events & mask) { + hwirq = fls64(events) - 1; + if (BIT_ULL(hwirq) & mask) { + virq = irq_find_mapping(opal_event_irqchip.domain, + hwirq); + if (virq) + generic_handle_irq(virq); + } + events &= ~BIT_ULL(hwirq); + } +} + +static irqreturn_t opal_interrupt(int irq, void *data) +{ + __be64 events; + + opal_handle_interrupt(virq_to_hw(irq), &events); + opal_handle_events(be64_to_cpu(events)); + + return IRQ_HANDLED; +} + +static void opal_handle_irq_work(struct irq_work *work) +{ + opal_handle_events(be64_to_cpu(last_outstanding_events)); +} + +static int opal_event_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) +{ + return h->of_node == node; +} + +static int opal_event_xlate(struct irq_domain *h, struct device_node *np, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + *out_hwirq = intspec[0]; + *out_flags = IRQ_TYPE_LEVEL_HIGH; + + return 0; +} + +static const struct irq_domain_ops opal_event_domain_ops = { + .match = opal_event_match, + .map = opal_event_map, + .xlate = opal_event_xlate, +}; + +void opal_event_shutdown(void) +{ + unsigned int i; + + /* First free interrupts, which will also mask them */ + for (i = 0; i < opal_irq_count; i++) { + if (opal_irqs[i]) + free_irq(opal_irqs[i], NULL); + opal_irqs[i] = 0; + } +} + +int __init opal_event_init(void) +{ + struct device_node *dn, *opal_node; + const __be32 *irqs; + int i, irqlen, rc = 0; + + opal_node = of_find_node_by_path("/ibm,opal"); + if (!opal_node) { + pr_warn("opal: Node not found\n"); + return -ENODEV; + } + + /* If dn is NULL it means the domain won't be linked to a DT + * node so therefore irq_of_parse_and_map(...) wont work. But + * that shouldn't be problem because if we're running a + * version of skiboot that doesn't have the dn then the + * devices won't have the correct properties and will have to + * fall back to the legacy method (opal_event_request(...)) + * anyway. */ + dn = of_find_compatible_node(NULL, NULL, "ibm,opal-event"); + opal_event_irqchip.domain = irq_domain_add_linear(dn, MAX_NUM_EVENTS, + &opal_event_domain_ops, &opal_event_irqchip); + of_node_put(dn); + if (!opal_event_irqchip.domain) { + pr_warn("opal: Unable to create irq domain\n"); + rc = -ENOMEM; + goto out; + } + + /* Get interrupt property */ + irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); + opal_irq_count = irqs ? (irqlen / 4) : 0; + pr_debug("Found %d interrupts reserved for OPAL\n", opal_irq_count); + + /* Install interrupt handlers */ + opal_irqs = kcalloc(opal_irq_count, sizeof(*opal_irqs), GFP_KERNEL); + for (i = 0; irqs && i < opal_irq_count; i++, irqs++) { + unsigned int irq, virq; + + /* Get hardware and virtual IRQ */ + irq = be32_to_cpup(irqs); + virq = irq_create_mapping(NULL, irq); + if (virq == NO_IRQ) { + pr_warn("Failed to map irq 0x%x\n", irq); + continue; + } + + /* Install interrupt handler */ + rc = request_irq(virq, opal_interrupt, 0, "opal", NULL); + if (rc) { + irq_dispose_mapping(virq); + pr_warn("Error %d requesting irq %d (0x%x)\n", + rc, virq, irq); + continue; + } + + /* Cache IRQ */ + opal_irqs[i] = virq; + } + +out: + of_node_put(opal_node); + return rc; +} +machine_arch_initcall(powernv, opal_event_init); + +/** + * opal_event_request(unsigned int opal_event_nr) - Request an event + * @opal_event_nr: the opal event number to request + * + * This routine can be used to find the linux virq number which can + * then be passed to request_irq to assign a handler for a particular + * opal event. This should only be used by legacy devices which don't + * have proper device tree bindings. Most devices should use + * irq_of_parse_and_map() instead. + */ +int opal_event_request(unsigned int opal_event_nr) +{ + if (WARN_ON_ONCE(!opal_event_irqchip.domain)) + return NO_IRQ; + + return irq_create_mapping(opal_event_irqchip.domain, opal_event_nr); +} +EXPORT_SYMBOL(opal_event_request); diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index a6c42f34303a..638c4060938e 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -678,7 +678,8 @@ static int ps3_host_map(struct irq_domain *h, unsigned int virq, return 0; } -static int ps3_host_match(struct irq_domain *h, struct device_node *np) +static int ps3_host_match(struct irq_domain *h, struct device_node *np, + enum irq_domain_bus_token bus_token) { /* Match all */ return 1; diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c index 2d20f10a4203..eca0b00794fa 100644 --- a/arch/powerpc/sysdev/ehv_pic.c +++ b/arch/powerpc/sysdev/ehv_pic.c @@ -177,7 +177,8 @@ unsigned int ehv_pic_get_irq(void) return irq_linear_revmap(global_ehv_pic->irqhost, irq); } -static int ehv_pic_host_match(struct irq_domain *h, struct device_node *node) +static int ehv_pic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { /* Exact match, unless ehv_pic node is NULL */ return h->of_node == NULL || h->of_node == node; diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 45598da0b321..8c3756cbc4f9 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -162,7 +162,8 @@ static struct resource pic_edgectrl_iores = { .flags = IORESOURCE_BUSY, }; -static int i8259_host_match(struct irq_domain *h, struct device_node *node) +static int i8259_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { return h->of_node == NULL || h->of_node == node; } diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index b28733727ed3..27d317a4856d 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -671,7 +671,8 @@ static struct irq_chip ipic_edge_irq_chip = { .irq_set_type = ipic_set_irq_type, }; -static int ipic_host_match(struct irq_domain *h, struct device_node *node) +static int ipic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { /* Exact match, unless ipic node is NULL */ return h->of_node == NULL || h->of_node == node; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index b2b8447a227a..8b6e282479b8 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1007,7 +1007,8 @@ static struct irq_chip mpic_irq_ht_chip = { #endif /* CONFIG_MPIC_U3_HT_IRQS */ -static int mpic_host_match(struct irq_domain *h, struct device_node *node) +static int mpic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { /* Exact match, unless mpic node is NULL */ return h->of_node == NULL || h->of_node == node; diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 543765e1ef14..da00c9e761e1 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -244,7 +244,8 @@ static struct irq_chip qe_ic_irq_chip = { .irq_mask_ack = qe_ic_mask_irq, }; -static int qe_ic_host_match(struct irq_domain *h, struct device_node *node) +static int qe_ic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { /* Exact match, unless qe_ic node is NULL */ return h->of_node == NULL || h->of_node == node; diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index 878a54036a25..41e334db8847 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -298,7 +298,8 @@ int xics_get_irq_server(unsigned int virq, const struct cpumask *cpumask, } #endif /* CONFIG_SMP */ -static int xics_host_match(struct irq_domain *h, struct device_node *node) +static int xics_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) { struct ics *ics; diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index d24fa1964eb8..6d4e44ea74ac 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -800,7 +800,8 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, result = thermal_zone_bind_cooling_device (thermal, trip, cdev, - THERMAL_NO_LIMIT, THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); else result = thermal_zone_unbind_cooling_device @@ -824,7 +825,8 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, if (bind) result = thermal_zone_bind_cooling_device (thermal, trip, cdev, - THERMAL_NO_LIMIT, THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); else result = thermal_zone_unbind_cooling_device (thermal, trip, cdev); @@ -841,7 +843,8 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, result = thermal_zone_bind_cooling_device (thermal, THERMAL_TRIPS_NONE, cdev, THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); else result = thermal_zone_unbind_cooling_device (thermal, THERMAL_TRIPS_NONE, diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index dda4927e47a6..801bd75f7266 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -22,7 +22,7 @@ obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o obj-$(CONFIG_ARM_GIC_V2M) += irq-gic-v2m.o obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o -obj-$(CONFIG_ARM_GIC_V3_ITS) += irq-gic-v3-its.o +obj-$(CONFIG_ARM_GIC_V3_ITS) += irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o obj-$(CONFIG_ARM_NVIC) += irq-nvic.o obj-$(CONFIG_ARM_VIC) += irq-vic.o obj-$(CONFIG_ATMEL_AIC_IRQ) += irq-atmel-aic-common.o irq-atmel-aic.o diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c index fdf706555d72..ec9c37674a0b 100644 --- a/drivers/irqchip/irq-gic-v2m.c +++ b/drivers/irqchip/irq-gic-v2m.c @@ -45,7 +45,6 @@ struct v2m_data { spinlock_t msi_cnt_lock; - struct msi_controller mchip; struct resource res; /* GICv2m resource */ void __iomem *base; /* GICv2m virt address */ u32 spi_start; /* The SPI number that MSIs start */ @@ -218,6 +217,7 @@ static int __init gicv2m_init_one(struct device_node *node, { int ret; struct v2m_data *v2m; + struct irq_domain *inner_domain; v2m = kzalloc(sizeof(struct v2m_data), GFP_KERNEL); if (!v2m) { @@ -261,19 +261,18 @@ static int __init gicv2m_init_one(struct device_node *node, goto err_iounmap; } - v2m->domain = irq_domain_add_tree(NULL, &gicv2m_domain_ops, v2m); - if (!v2m->domain) { + inner_domain = irq_domain_add_tree(node, &gicv2m_domain_ops, v2m); + if (!inner_domain) { pr_err("Failed to create GICv2m domain\n"); ret = -ENOMEM; goto err_free_bm; } - v2m->domain->parent = parent; - v2m->mchip.of_node = node; - v2m->mchip.domain = pci_msi_create_irq_domain(node, - &gicv2m_msi_domain_info, - v2m->domain); - if (!v2m->mchip.domain) { + inner_domain->bus_token = DOMAIN_BUS_NEXUS; + inner_domain->parent = parent; + v2m->domain = pci_msi_create_irq_domain(node, &gicv2m_msi_domain_info, + inner_domain); + if (!v2m->domain) { pr_err("Failed to create MSI domain\n"); ret = -ENOMEM; goto err_free_domains; @@ -281,12 +280,6 @@ static int __init gicv2m_init_one(struct device_node *node, spin_lock_init(&v2m->msi_cnt_lock); - ret = of_pci_msi_chip_add(&v2m->mchip); - if (ret) { - pr_err("Failed to add msi_chip.\n"); - goto err_free_domains; - } - pr_info("Node %s: range[%#lx:%#lx], SPI[%d:%d]\n", node->name, (unsigned long)v2m->res.start, (unsigned long)v2m->res.end, v2m->spi_start, (v2m->spi_start + v2m->nr_spis)); @@ -294,10 +287,10 @@ static int __init gicv2m_init_one(struct device_node *node, return 0; err_free_domains: - if (v2m->mchip.domain) - irq_domain_remove(v2m->mchip.domain); if (v2m->domain) irq_domain_remove(v2m->domain); + if (inner_domain) + irq_domain_remove(inner_domain); err_free_bm: kfree(v2m->bm); err_iounmap: diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c new file mode 100644 index 000000000000..cf351c637464 --- /dev/null +++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2013-2015 ARM Limited, All Rights Reserved. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/msi.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_pci.h> + +static void its_mask_msi_irq(struct irq_data *d) +{ + pci_msi_mask_irq(d); + irq_chip_mask_parent(d); +} + +static void its_unmask_msi_irq(struct irq_data *d) +{ + pci_msi_unmask_irq(d); + irq_chip_unmask_parent(d); +} + +static struct irq_chip its_msi_irq_chip = { + .name = "ITS-MSI", + .irq_unmask = its_unmask_msi_irq, + .irq_mask = its_mask_msi_irq, + .irq_eoi = irq_chip_eoi_parent, + .irq_write_msi_msg = pci_msi_domain_write_msg, +}; + +struct its_pci_alias { + struct pci_dev *pdev; + u32 dev_id; + u32 count; +}; + +static int its_pci_msi_vec_count(struct pci_dev *pdev) +{ + int msi, msix; + + msi = max(pci_msi_vec_count(pdev), 0); + msix = max(pci_msix_vec_count(pdev), 0); + + return max(msi, msix); +} + +static int its_get_pci_alias(struct pci_dev *pdev, u16 alias, void *data) +{ + struct its_pci_alias *dev_alias = data; + + dev_alias->dev_id = alias; + if (pdev != dev_alias->pdev) + dev_alias->count += its_pci_msi_vec_count(dev_alias->pdev); + + return 0; +} + +static int its_pci_msi_prepare(struct irq_domain *domain, struct device *dev, + int nvec, msi_alloc_info_t *info) +{ + struct pci_dev *pdev; + struct its_pci_alias dev_alias; + struct msi_domain_info *msi_info; + + if (!dev_is_pci(dev)) + return -EINVAL; + + msi_info = msi_get_domain_info(domain->parent); + + pdev = to_pci_dev(dev); + dev_alias.pdev = pdev; + dev_alias.count = nvec; + + pci_for_each_dma_alias(pdev, its_get_pci_alias, &dev_alias); + + /* ITS specific DeviceID, as the core ITS ignores dev. */ + info->scratchpad[0].ul = dev_alias.dev_id; + + return msi_info->ops->msi_prepare(domain->parent, + dev, dev_alias.count, info); +} + +static struct msi_domain_ops its_pci_msi_ops = { + .msi_prepare = its_pci_msi_prepare, +}; + +static struct msi_domain_info its_pci_msi_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | + MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX), + .ops = &its_pci_msi_ops, + .chip = &its_msi_irq_chip, +}; + +static struct of_device_id its_device_id[] = { + { .compatible = "arm,gic-v3-its", }, + {}, +}; + +static int __init its_pci_msi_init(void) +{ + struct device_node *np; + struct irq_domain *parent; + + for (np = of_find_matching_node(NULL, its_device_id); np; + np = of_find_matching_node(np, its_device_id)) { + if (!of_property_read_bool(np, "msi-controller")) + continue; + + parent = irq_find_matching_host(np, DOMAIN_BUS_NEXUS); + if (!parent || !msi_get_domain_info(parent)) { + pr_err("%s: unable to locate ITS domain\n", + np->full_name); + continue; + } + + if (!pci_msi_create_irq_domain(np, &its_pci_msi_domain_info, + parent)) { + pr_err("%s: unable to create PCI domain\n", + np->full_name); + continue; + } + + pr_info("PCI/MSI: %s domain created\n", np->full_name); + } + + return 0; +} +early_initcall(its_pci_msi_init); diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 9a791dd52199..78db25293384 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -54,14 +54,12 @@ struct its_collection { /* * The ITS structure - contains most of the infrastructure, with the - * msi_controller, the command queue, the collections, and the list of - * devices writing to it. + * top-level MSI domain, the command queue, the collections, and the + * list of devices writing to it. */ struct its_node { raw_spinlock_t lock; struct list_head entry; - struct msi_controller msi_chip; - struct irq_domain *domain; void __iomem *base; unsigned long phys_base; struct its_cmd_block *cmd_base; @@ -643,26 +641,6 @@ static struct irq_chip its_irq_chip = { .irq_compose_msi_msg = its_irq_compose_msi_msg, }; -static void its_mask_msi_irq(struct irq_data *d) -{ - pci_msi_mask_irq(d); - irq_chip_mask_parent(d); -} - -static void its_unmask_msi_irq(struct irq_data *d) -{ - pci_msi_unmask_irq(d); - irq_chip_unmask_parent(d); -} - -static struct irq_chip its_msi_irq_chip = { - .name = "ITS-MSI", - .irq_unmask = its_unmask_msi_irq, - .irq_mask = its_mask_msi_irq, - .irq_eoi = irq_chip_eoi_parent, - .irq_write_msi_msg = pci_msi_domain_write_msg, -}; - /* * How we allocate LPIs: * @@ -742,6 +720,9 @@ static unsigned long *its_lpi_alloc_chunks(int nr_irqs, int *base, int *nr_ids) out: spin_unlock(&lpi_lock); + if (!bitmap) + *base = *nr_ids = 0; + return bitmap; } @@ -831,7 +812,7 @@ static void its_free_tables(struct its_node *its) } } -static int its_alloc_tables(struct its_node *its) +static int its_alloc_tables(const char *node_name, struct its_node *its) { int err; int i; @@ -874,7 +855,7 @@ static int its_alloc_tables(struct its_node *its) if (order >= MAX_ORDER) { order = MAX_ORDER - 1; pr_warn("%s: Device Table too large, reduce its page order to %u\n", - its->msi_chip.of_node->full_name, order); + node_name, order); } } @@ -946,7 +927,7 @@ retry_baser: if (val != tmp) { pr_err("ITS: %s: GITS_BASER%d doesn't stick: %lx %lx\n", - its->msi_chip.of_node->full_name, i, + node_name, i, (unsigned long) val, (unsigned long) tmp); err = -ENXIO; goto out_free; @@ -1213,85 +1194,50 @@ static int its_alloc_device_irq(struct its_device *dev, irq_hw_number_t *hwirq) return 0; } -struct its_pci_alias { - struct pci_dev *pdev; - u32 dev_id; - u32 count; -}; - -static int its_pci_msi_vec_count(struct pci_dev *pdev) -{ - int msi, msix; - - msi = max(pci_msi_vec_count(pdev), 0); - msix = max(pci_msix_vec_count(pdev), 0); - - return max(msi, msix); -} - -static int its_get_pci_alias(struct pci_dev *pdev, u16 alias, void *data) -{ - struct its_pci_alias *dev_alias = data; - - dev_alias->dev_id = alias; - if (pdev != dev_alias->pdev) - dev_alias->count += its_pci_msi_vec_count(dev_alias->pdev); - - return 0; -} - static int its_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec, msi_alloc_info_t *info) { - struct pci_dev *pdev; struct its_node *its; struct its_device *its_dev; - struct its_pci_alias dev_alias; - - if (!dev_is_pci(dev)) - return -EINVAL; + struct msi_domain_info *msi_info; + u32 dev_id; - pdev = to_pci_dev(dev); - dev_alias.pdev = pdev; - dev_alias.count = nvec; + /* + * We ignore "dev" entierely, and rely on the dev_id that has + * been passed via the scratchpad. This limits this domain's + * usefulness to upper layers that definitely know that they + * are built on top of the ITS. + */ + dev_id = info->scratchpad[0].ul; - pci_for_each_dma_alias(pdev, its_get_pci_alias, &dev_alias); - its = domain->parent->host_data; + msi_info = msi_get_domain_info(domain); + its = msi_info->data; - its_dev = its_find_device(its, dev_alias.dev_id); + its_dev = its_find_device(its, dev_id); if (its_dev) { /* * We already have seen this ID, probably through * another alias (PCI bridge of some sort). No need to * create the device. */ - dev_dbg(dev, "Reusing ITT for devID %x\n", dev_alias.dev_id); + pr_debug("Reusing ITT for devID %x\n", dev_id); goto out; } - its_dev = its_create_device(its, dev_alias.dev_id, dev_alias.count); + its_dev = its_create_device(its, dev_id, nvec); if (!its_dev) return -ENOMEM; - dev_dbg(&pdev->dev, "ITT %d entries, %d bits\n", - dev_alias.count, ilog2(dev_alias.count)); + pr_debug("ITT %d entries, %d bits\n", nvec, ilog2(nvec)); out: info->scratchpad[0].ptr = its_dev; - info->scratchpad[1].ptr = dev; return 0; } -static struct msi_domain_ops its_pci_msi_ops = { +static struct msi_domain_ops its_msi_domain_ops = { .msi_prepare = its_msi_prepare, }; -static struct msi_domain_info its_pci_msi_domain_info = { - .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | - MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX), - .ops = &its_pci_msi_ops, - .chip = &its_msi_irq_chip, -}; - static int its_irq_gic_domain_alloc(struct irq_domain *domain, unsigned int virq, irq_hw_number_t hwirq) @@ -1327,9 +1273,9 @@ static int its_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq, &its_irq_chip, its_dev); - dev_dbg(info->scratchpad[1].ptr, "ID:%d pID:%d vID:%d\n", - (int)(hwirq - its_dev->event_map.lpi_base), - (int)hwirq, virq + i); + pr_debug("ID:%d pID:%d vID:%d\n", + (int)(hwirq - its_dev->event_map.lpi_base), + (int) hwirq, virq + i); } return 0; @@ -1430,6 +1376,7 @@ static int its_probe(struct device_node *node, struct irq_domain *parent) struct resource res; struct its_node *its; void __iomem *its_base; + struct irq_domain *inner_domain; u32 val; u64 baser, tmp; int err; @@ -1473,7 +1420,6 @@ static int its_probe(struct device_node *node, struct irq_domain *parent) INIT_LIST_HEAD(&its->its_device_list); its->base = its_base; its->phys_base = res.start; - its->msi_chip.of_node = node; its->ite_size = ((readl_relaxed(its_base + GITS_TYPER) >> 4) & 0xf) + 1; its->cmd_base = kzalloc(ITS_CMD_QUEUE_SZ, GFP_KERNEL); @@ -1483,7 +1429,7 @@ static int its_probe(struct device_node *node, struct irq_domain *parent) } its->cmd_write = its->cmd_base; - err = its_alloc_tables(its); + err = its_alloc_tables(node->full_name, its); if (err) goto out_free_cmd; @@ -1519,26 +1465,27 @@ static int its_probe(struct device_node *node, struct irq_domain *parent) writeq_relaxed(0, its->base + GITS_CWRITER); writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR); - if (of_property_read_bool(its->msi_chip.of_node, "msi-controller")) { - its->domain = irq_domain_add_tree(NULL, &its_domain_ops, its); - if (!its->domain) { + if (of_property_read_bool(node, "msi-controller")) { + struct msi_domain_info *info; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { err = -ENOMEM; goto out_free_tables; } - its->domain->parent = parent; - - its->msi_chip.domain = pci_msi_create_irq_domain(node, - &its_pci_msi_domain_info, - its->domain); - if (!its->msi_chip.domain) { + inner_domain = irq_domain_add_tree(node, &its_domain_ops, its); + if (!inner_domain) { err = -ENOMEM; - goto out_free_domains; + kfree(info); + goto out_free_tables; } - err = of_pci_msi_chip_add(&its->msi_chip); - if (err) - goto out_free_domains; + inner_domain->parent = parent; + inner_domain->bus_token = DOMAIN_BUS_NEXUS; + info->ops = &its_msi_domain_ops; + info->data = its; + inner_domain->host_data = info; } spin_lock(&its_lock); @@ -1547,11 +1494,6 @@ static int its_probe(struct device_node *node, struct irq_domain *parent) return 0; -out_free_domains: - if (its->msi_chip.domain) - irq_domain_remove(its->msi_chip.domain); - if (its->domain) - irq_domain_remove(its->domain); out_free_tables: its_free_tables(its); out_free_cmd: diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 1a7980692f25..c21e364dcd96 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -18,6 +18,7 @@ * driver. */ +#include <linux/device.h> #include <linux/errno.h> #include <linux/list.h> #include <linux/module.h> @@ -577,3 +578,23 @@ err: kfree(desc); } } + +/** + * of_msi_configure - Set the msi_domain field of a device + * @dev: device structure to associate with an MSI irq domain + * @np: device node for that device + */ +void of_msi_configure(struct device *dev, struct device_node *np) +{ + struct device_node *msi_np; + struct irq_domain *d; + + msi_np = of_parse_phandle(np, "msi-parent", 0); + if (!msi_np) + return; + + d = irq_find_matching_host(msi_np, DOMAIN_BUS_PLATFORM_MSI); + if (!d) + d = irq_find_host(msi_np); + dev_set_msi_domain(dev, d); +} diff --git a/drivers/of/platform.c b/drivers/of/platform.c index ddf8e42c9367..8a002d6151f2 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -184,6 +184,7 @@ static struct platform_device *of_platform_device_create_pdata( dev->dev.bus = &platform_bus_type; dev->dev.platform_data = platform_data; of_dma_configure(&dev->dev, dev->dev.of_node); + of_msi_configure(&dev->dev, dev->dev.of_node); if (of_device_add(dev) != 0) { of_dma_deconfigure(&dev->dev); diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 73e4af400a5a..be3f631c3f75 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o # obj-$(CONFIG_ALPHA) += setup-irq.o obj-$(CONFIG_ARM) += setup-irq.o +obj-$(CONFIG_ARM64) += setup-irq.o obj-$(CONFIG_UNICORE32) += setup-irq.o obj-$(CONFIG_SUPERH) += setup-irq.o obj-$(CONFIG_MIPS) += setup-irq.o diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 1dfb567b3522..e90d132d3316 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -53,7 +53,7 @@ config PCI_RCAR_GEN2_PCIE config PCI_HOST_GENERIC bool "Generic PCI host controller" - depends on ARM && OF + depends on (ARM || ARM64) && OF help Say Y here if you want to support a simple generic PCI host controller, such as the one emulated by kvmtool. @@ -89,11 +89,20 @@ config PCI_XGENE depends on ARCH_XGENE depends on OF select PCIEPORTBUS + select PCI_MSI_IRQ_DOMAIN if PCI_MSI help Say Y here if you want internal PCI support on APM X-Gene SoC. There are 5 internal PCIe ports available. Each port is GEN3 capable and have varied lanes from x1 to x8. +config PCI_XGENE_MSI + bool "X-Gene v1 PCIe MSI feature" + depends on PCI_XGENE && PCI_MSI + default y + help + Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC. + This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC. + config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller" depends on OF && ARM diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index f733b4e27642..1957431d3fcc 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o obj-$(CONFIG_PCI_XGENE) += pci-xgene.o +obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c index ba46e581db99..265dd25169bf 100644 --- a/drivers/pci/host/pci-host-generic.c +++ b/drivers/pci/host/pci-host-generic.c @@ -38,7 +38,16 @@ struct gen_pci_cfg_windows { const struct gen_pci_cfg_bus_ops *ops; }; +/* + * ARM pcibios functions expect the ARM struct pci_sys_data as the PCI + * sysdata. Add pci_sys_data as the first element in struct gen_pci so + * that when we use a gen_pci pointer as sysdata, it is also a pointer to + * a struct pci_sys_data. + */ struct gen_pci { +#ifdef CONFIG_ARM + struct pci_sys_data sys; +#endif struct pci_host_bridge host; struct gen_pci_cfg_windows cfg; struct list_head resources; @@ -48,8 +57,7 @@ static void __iomem *gen_pci_map_cfg_bus_cam(struct pci_bus *bus, unsigned int devfn, int where) { - struct pci_sys_data *sys = bus->sysdata; - struct gen_pci *pci = sys->private_data; + struct gen_pci *pci = bus->sysdata; resource_size_t idx = bus->number - pci->cfg.bus_range->start; return pci->cfg.win[idx] + ((devfn << 8) | where); @@ -64,8 +72,7 @@ static void __iomem *gen_pci_map_cfg_bus_ecam(struct pci_bus *bus, unsigned int devfn, int where) { - struct pci_sys_data *sys = bus->sysdata; - struct gen_pci *pci = sys->private_data; + struct gen_pci *pci = bus->sysdata; resource_size_t idx = bus->number - pci->cfg.bus_range->start; return pci->cfg.win[idx] + ((devfn << 12) | where); @@ -198,13 +205,6 @@ static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci) return 0; } -static int gen_pci_setup(int nr, struct pci_sys_data *sys) -{ - struct gen_pci *pci = sys->private_data; - list_splice_init(&pci->resources, &sys->resources); - return 1; -} - static int gen_pci_probe(struct platform_device *pdev) { int err; @@ -214,13 +214,7 @@ static int gen_pci_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); - struct hw_pci hw = { - .nr_controllers = 1, - .private_data = (void **)&pci, - .setup = gen_pci_setup, - .map_irq = of_irq_parse_and_map_pci, - .ops = &gen_pci_ops, - }; + struct pci_bus *bus, *child; if (!pci) return -ENOMEM; @@ -258,7 +252,27 @@ static int gen_pci_probe(struct platform_device *pdev) return err; } - pci_common_init_dev(dev, &hw); + /* Do not reassign resources if probe only */ + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS); + + bus = pci_scan_root_bus(dev, 0, &gen_pci_ops, pci, &pci->resources); + if (!bus) { + dev_err(dev, "Scanning rootbus failed"); + return -ENODEV; + } + + pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); + + if (!pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } + + pci_bus_add_devices(bus); return 0; } diff --git a/drivers/pci/host/pci-xgene-msi.c b/drivers/pci/host/pci-xgene-msi.c new file mode 100644 index 000000000000..ec5a14b3189b --- /dev/null +++ b/drivers/pci/host/pci-xgene-msi.c @@ -0,0 +1,587 @@ +/* + * APM X-Gene MSI Driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Tanmay Inamdar <tinamdar@apm.com> + * Duc Dang <dhdang@apm.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of_irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/of_pci.h> + +#define MSI_IR0 0x000000 +#define MSI_INT0 0x800000 +#define IDX_PER_GROUP 8 +#define IRQS_PER_IDX 16 +#define NR_HW_IRQS 16 +#define NR_MSI_VEC (IDX_PER_GROUP * IRQS_PER_IDX * NR_HW_IRQS) + +struct xgene_msi_group { + struct xgene_msi *msi; + int gic_irq; + u32 msi_grp; +}; + +struct xgene_msi { + struct device_node *node; + struct irq_domain *inner_domain; + struct irq_domain *msi_domain; + u64 msi_addr; + void __iomem *msi_regs; + unsigned long *bitmap; + struct mutex bitmap_lock; + struct xgene_msi_group *msi_groups; + int num_cpus; +}; + +/* Global data */ +static struct xgene_msi xgene_msi_ctrl; + +static struct irq_chip xgene_msi_top_irq_chip = { + .name = "X-Gene1 MSI", + .irq_enable = pci_msi_unmask_irq, + .irq_disable = pci_msi_mask_irq, + .irq_mask = pci_msi_mask_irq, + .irq_unmask = pci_msi_unmask_irq, +}; + +static struct msi_domain_info xgene_msi_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | + MSI_FLAG_PCI_MSIX), + .chip = &xgene_msi_top_irq_chip, +}; + +/* + * X-Gene v1 has 16 groups of MSI termination registers MSInIRx, where + * n is group number (0..F), x is index of registers in each group (0..7) + * The register layout is as follows: + * MSI0IR0 base_addr + * MSI0IR1 base_addr + 0x10000 + * ... ... + * MSI0IR6 base_addr + 0x60000 + * MSI0IR7 base_addr + 0x70000 + * MSI1IR0 base_addr + 0x80000 + * MSI1IR1 base_addr + 0x90000 + * ... ... + * MSI1IR7 base_addr + 0xF0000 + * MSI2IR0 base_addr + 0x100000 + * ... ... + * MSIFIR0 base_addr + 0x780000 + * MSIFIR1 base_addr + 0x790000 + * ... ... + * MSIFIR7 base_addr + 0x7F0000 + * MSIINT0 base_addr + 0x800000 + * MSIINT1 base_addr + 0x810000 + * ... ... + * MSIINTF base_addr + 0x8F0000 + * + * Each index register supports 16 MSI vectors (0..15) to generate interrupt. + * There are total 16 GIC IRQs assigned for these 16 groups of MSI termination + * registers. + * + * Each MSI termination group has 1 MSIINTn register (n is 0..15) to indicate + * the MSI pending status caused by 1 of its 8 index registers. + */ + +/* MSInIRx read helper */ +static u32 xgene_msi_ir_read(struct xgene_msi *msi, + u32 msi_grp, u32 msir_idx) +{ + return readl_relaxed(msi->msi_regs + MSI_IR0 + + (msi_grp << 19) + (msir_idx << 16)); +} + +/* MSIINTn read helper */ +static u32 xgene_msi_int_read(struct xgene_msi *msi, u32 msi_grp) +{ + return readl_relaxed(msi->msi_regs + MSI_INT0 + (msi_grp << 16)); +} + +/* + * With 2048 MSI vectors supported, the MSI message can be constructed using + * following scheme: + * - Divide into 8 256-vector groups + * Group 0: 0-255 + * Group 1: 256-511 + * Group 2: 512-767 + * ... + * Group 7: 1792-2047 + * - Each 256-vector group is divided into 16 16-vector groups + * As an example: 16 16-vector groups for 256-vector group 0-255 is + * Group 0: 0-15 + * Group 1: 16-32 + * ... + * Group 15: 240-255 + * - The termination address of MSI vector in 256-vector group n and 16-vector + * group x is the address of MSIxIRn + * - The data for MSI vector in 16-vector group x is x + */ +static u32 hwirq_to_reg_set(unsigned long hwirq) +{ + return (hwirq / (NR_HW_IRQS * IRQS_PER_IDX)); +} + +static u32 hwirq_to_group(unsigned long hwirq) +{ + return (hwirq % NR_HW_IRQS); +} + +static u32 hwirq_to_msi_data(unsigned long hwirq) +{ + return ((hwirq / NR_HW_IRQS) % IRQS_PER_IDX); +} + +static void xgene_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) +{ + struct xgene_msi *msi = irq_data_get_irq_chip_data(data); + u32 reg_set = hwirq_to_reg_set(data->hwirq); + u32 group = hwirq_to_group(data->hwirq); + u64 target_addr = msi->msi_addr + (((8 * group) + reg_set) << 16); + + msg->address_hi = upper_32_bits(target_addr); + msg->address_lo = lower_32_bits(target_addr); + msg->data = hwirq_to_msi_data(data->hwirq); +} + +/* + * X-Gene v1 only has 16 MSI GIC IRQs for 2048 MSI vectors. To maintain + * the expected behaviour of .set_affinity for each MSI interrupt, the 16 + * MSI GIC IRQs are statically allocated to 8 X-Gene v1 cores (2 GIC IRQs + * for each core). The MSI vector is moved fom 1 MSI GIC IRQ to another + * MSI GIC IRQ to steer its MSI interrupt to correct X-Gene v1 core. As a + * consequence, the total MSI vectors that X-Gene v1 supports will be + * reduced to 256 (2048/8) vectors. + */ +static int hwirq_to_cpu(unsigned long hwirq) +{ + return (hwirq % xgene_msi_ctrl.num_cpus); +} + +static unsigned long hwirq_to_canonical_hwirq(unsigned long hwirq) +{ + return (hwirq - hwirq_to_cpu(hwirq)); +} + +static int xgene_msi_set_affinity(struct irq_data *irqdata, + const struct cpumask *mask, bool force) +{ + int target_cpu = cpumask_first(mask); + int curr_cpu; + + curr_cpu = hwirq_to_cpu(irqdata->hwirq); + if (curr_cpu == target_cpu) + return IRQ_SET_MASK_OK_DONE; + + /* Update MSI number to target the new CPU */ + irqdata->hwirq = hwirq_to_canonical_hwirq(irqdata->hwirq) + target_cpu; + + return IRQ_SET_MASK_OK; +} + +static struct irq_chip xgene_msi_bottom_irq_chip = { + .name = "MSI", + .irq_set_affinity = xgene_msi_set_affinity, + .irq_compose_msi_msg = xgene_compose_msi_msg, +}; + +static int xgene_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *args) +{ + struct xgene_msi *msi = domain->host_data; + int msi_irq; + + mutex_lock(&msi->bitmap_lock); + + msi_irq = bitmap_find_next_zero_area(msi->bitmap, NR_MSI_VEC, 0, + msi->num_cpus, 0); + if (msi_irq < NR_MSI_VEC) + bitmap_set(msi->bitmap, msi_irq, msi->num_cpus); + else + msi_irq = -ENOSPC; + + mutex_unlock(&msi->bitmap_lock); + + if (msi_irq < 0) + return msi_irq; + + irq_domain_set_info(domain, virq, msi_irq, + &xgene_msi_bottom_irq_chip, domain->host_data, + handle_simple_irq, NULL, NULL); + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +static void xgene_irq_domain_free(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs) +{ + struct irq_data *d = irq_domain_get_irq_data(domain, virq); + struct xgene_msi *msi = irq_data_get_irq_chip_data(d); + u32 hwirq; + + mutex_lock(&msi->bitmap_lock); + + hwirq = hwirq_to_canonical_hwirq(d->hwirq); + bitmap_clear(msi->bitmap, hwirq, msi->num_cpus); + + mutex_unlock(&msi->bitmap_lock); + + irq_domain_free_irqs_parent(domain, virq, nr_irqs); +} + +static const struct irq_domain_ops msi_domain_ops = { + .alloc = xgene_irq_domain_alloc, + .free = xgene_irq_domain_free, +}; + +static int xgene_allocate_domains(struct xgene_msi *msi) +{ + msi->inner_domain = irq_domain_add_linear(NULL, NR_MSI_VEC, + &msi_domain_ops, msi); + if (!msi->inner_domain) + return -ENOMEM; + + msi->msi_domain = pci_msi_create_irq_domain(msi->node, + &xgene_msi_domain_info, + msi->inner_domain); + + if (!msi->msi_domain) { + irq_domain_remove(msi->inner_domain); + return -ENOMEM; + } + + return 0; +} + +static void xgene_free_domains(struct xgene_msi *msi) +{ + if (msi->msi_domain) + irq_domain_remove(msi->msi_domain); + if (msi->inner_domain) + irq_domain_remove(msi->inner_domain); +} + +static int xgene_msi_init_allocator(struct xgene_msi *xgene_msi) +{ + int size = BITS_TO_LONGS(NR_MSI_VEC) * sizeof(long); + + xgene_msi->bitmap = kzalloc(size, GFP_KERNEL); + if (!xgene_msi->bitmap) + return -ENOMEM; + + mutex_init(&xgene_msi->bitmap_lock); + + xgene_msi->msi_groups = kcalloc(NR_HW_IRQS, + sizeof(struct xgene_msi_group), + GFP_KERNEL); + if (!xgene_msi->msi_groups) + return -ENOMEM; + + return 0; +} + +static void xgene_msi_isr(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct xgene_msi_group *msi_groups; + struct xgene_msi *xgene_msi; + unsigned int virq; + int msir_index, msir_val, hw_irq; + u32 intr_index, grp_select, msi_grp; + + chained_irq_enter(chip, desc); + + msi_groups = irq_desc_get_handler_data(desc); + xgene_msi = msi_groups->msi; + msi_grp = msi_groups->msi_grp; + + /* + * MSIINTn (n is 0..F) indicates if there is a pending MSI interrupt + * If bit x of this register is set (x is 0..7), one or more interupts + * corresponding to MSInIRx is set. + */ + grp_select = xgene_msi_int_read(xgene_msi, msi_grp); + while (grp_select) { + msir_index = ffs(grp_select) - 1; + /* + * Calculate MSInIRx address to read to check for interrupts + * (refer to termination address and data assignment + * described in xgene_compose_msi_msg() ) + */ + msir_val = xgene_msi_ir_read(xgene_msi, msi_grp, msir_index); + while (msir_val) { + intr_index = ffs(msir_val) - 1; + /* + * Calculate MSI vector number (refer to the termination + * address and data assignment described in + * xgene_compose_msi_msg function) + */ + hw_irq = (((msir_index * IRQS_PER_IDX) + intr_index) * + NR_HW_IRQS) + msi_grp; + /* + * As we have multiple hw_irq that maps to single MSI, + * always look up the virq using the hw_irq as seen from + * CPU0 + */ + hw_irq = hwirq_to_canonical_hwirq(hw_irq); + virq = irq_find_mapping(xgene_msi->inner_domain, hw_irq); + WARN_ON(!virq); + if (virq != 0) + generic_handle_irq(virq); + msir_val &= ~(1 << intr_index); + } + grp_select &= ~(1 << msir_index); + + if (!grp_select) { + /* + * We handled all interrupts happened in this group, + * resample this group MSI_INTx register in case + * something else has been made pending in the meantime + */ + grp_select = xgene_msi_int_read(xgene_msi, msi_grp); + } + } + + chained_irq_exit(chip, desc); +} + +static int xgene_msi_remove(struct platform_device *pdev) +{ + int virq, i; + struct xgene_msi *msi = platform_get_drvdata(pdev); + + for (i = 0; i < NR_HW_IRQS; i++) { + virq = msi->msi_groups[i].gic_irq; + if (virq != 0) { + irq_set_chained_handler(virq, NULL); + irq_set_handler_data(virq, NULL); + } + } + kfree(msi->msi_groups); + + kfree(msi->bitmap); + msi->bitmap = NULL; + + xgene_free_domains(msi); + + return 0; +} + +static int xgene_msi_hwirq_alloc(unsigned int cpu) +{ + struct xgene_msi *msi = &xgene_msi_ctrl; + struct xgene_msi_group *msi_group; + cpumask_var_t mask; + int i; + int err; + + for (i = cpu; i < NR_HW_IRQS; i += msi->num_cpus) { + msi_group = &msi->msi_groups[i]; + if (!msi_group->gic_irq) + continue; + + irq_set_chained_handler(msi_group->gic_irq, + xgene_msi_isr); + err = irq_set_handler_data(msi_group->gic_irq, msi_group); + if (err) { + pr_err("failed to register GIC IRQ handler\n"); + return -EINVAL; + } + /* + * Statically allocate MSI GIC IRQs to each CPU core. + * With 8-core X-Gene v1, 2 MSI GIC IRQs are allocated + * to each core. + */ + if (alloc_cpumask_var(&mask, GFP_KERNEL)) { + cpumask_clear(mask); + cpumask_set_cpu(cpu, mask); + err = irq_set_affinity(msi_group->gic_irq, mask); + if (err) + pr_err("failed to set affinity for GIC IRQ"); + free_cpumask_var(mask); + } else { + pr_err("failed to alloc CPU mask for affinity\n"); + err = -EINVAL; + } + + if (err) { + irq_set_chained_handler(msi_group->gic_irq, NULL); + irq_set_handler_data(msi_group->gic_irq, NULL); + return err; + } + } + + return 0; +} + +static void xgene_msi_hwirq_free(unsigned int cpu) +{ + struct xgene_msi *msi = &xgene_msi_ctrl; + struct xgene_msi_group *msi_group; + int i; + + for (i = cpu; i < NR_HW_IRQS; i += msi->num_cpus) { + msi_group = &msi->msi_groups[i]; + if (!msi_group->gic_irq) + continue; + + irq_set_chained_handler(msi_group->gic_irq, NULL); + irq_set_handler_data(msi_group->gic_irq, NULL); + } +} + +static int xgene_msi_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned cpu = (unsigned long)hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + xgene_msi_hwirq_alloc(cpu); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + xgene_msi_hwirq_free(cpu); + break; + default: + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block xgene_msi_cpu_notifier = { + .notifier_call = xgene_msi_cpu_callback, +}; + +static const struct of_device_id xgene_msi_match_table[] = { + {.compatible = "apm,xgene1-msi"}, + {}, +}; + +static int xgene_msi_probe(struct platform_device *pdev) +{ + struct resource *res; + int rc, irq_index; + struct xgene_msi *xgene_msi; + unsigned int cpu; + int virt_msir; + u32 msi_val, msi_idx; + + xgene_msi = &xgene_msi_ctrl; + + platform_set_drvdata(pdev, xgene_msi); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + xgene_msi->msi_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(xgene_msi->msi_regs)) { + dev_err(&pdev->dev, "no reg space\n"); + rc = -EINVAL; + goto error; + } + xgene_msi->msi_addr = res->start; + xgene_msi->node = pdev->dev.of_node; + xgene_msi->num_cpus = num_possible_cpus(); + + rc = xgene_msi_init_allocator(xgene_msi); + if (rc) { + dev_err(&pdev->dev, "Error allocating MSI bitmap\n"); + goto error; + } + + rc = xgene_allocate_domains(xgene_msi); + if (rc) { + dev_err(&pdev->dev, "Failed to allocate MSI domain\n"); + goto error; + } + + for (irq_index = 0; irq_index < NR_HW_IRQS; irq_index++) { + virt_msir = platform_get_irq(pdev, irq_index); + if (virt_msir < 0) { + dev_err(&pdev->dev, "Cannot translate IRQ index %d\n", + irq_index); + rc = -EINVAL; + goto error; + } + xgene_msi->msi_groups[irq_index].gic_irq = virt_msir; + xgene_msi->msi_groups[irq_index].msi_grp = irq_index; + xgene_msi->msi_groups[irq_index].msi = xgene_msi; + } + + /* + * MSInIRx registers are read-to-clear; before registering + * interrupt handlers, read all of them to clear spurious + * interrupts that may occur before the driver is probed. + */ + for (irq_index = 0; irq_index < NR_HW_IRQS; irq_index++) { + for (msi_idx = 0; msi_idx < IDX_PER_GROUP; msi_idx++) + msi_val = xgene_msi_ir_read(xgene_msi, irq_index, + msi_idx); + /* Read MSIINTn to confirm */ + msi_val = xgene_msi_int_read(xgene_msi, irq_index); + if (msi_val) { + dev_err(&pdev->dev, "Failed to clear spurious IRQ\n"); + rc = -EINVAL; + goto error; + } + } + + cpu_notifier_register_begin(); + + for_each_online_cpu(cpu) + if (xgene_msi_hwirq_alloc(cpu)) { + dev_err(&pdev->dev, "failed to register MSI handlers\n"); + cpu_notifier_register_done(); + goto error; + } + + rc = __register_hotcpu_notifier(&xgene_msi_cpu_notifier); + if (rc) { + dev_err(&pdev->dev, "failed to add CPU MSI notifier\n"); + cpu_notifier_register_done(); + goto error; + } + + cpu_notifier_register_done(); + + dev_info(&pdev->dev, "APM X-Gene PCIe MSI driver loaded\n"); + + return 0; + +error: + xgene_msi_remove(pdev); + return rc; +} + +static struct platform_driver xgene_msi_driver = { + .driver = { + .name = "xgene-msi", + .owner = THIS_MODULE, + .of_match_table = xgene_msi_match_table, + }, + .probe = xgene_msi_probe, + .remove = xgene_msi_remove, +}; + +static int __init xgene_pcie_msi_init(void) +{ + return platform_driver_register(&xgene_msi_driver); +} +subsys_initcall(xgene_pcie_msi_init); diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c index ee082c0366ec..3e5a636c9a9a 100644 --- a/drivers/pci/host/pci-xgene.c +++ b/drivers/pci/host/pci-xgene.c @@ -468,6 +468,23 @@ static int xgene_pcie_setup(struct xgene_pcie_port *port, return 0; } +static int xgene_pcie_msi_enable(struct pci_bus *bus) +{ + struct device_node *msi_node; + + msi_node = of_parse_phandle(bus->dev.of_node, + "msi-parent", 0); + if (!msi_node) + return -ENODEV; + + bus->msi = of_pci_find_msi_chip_by_node(msi_node); + if (!bus->msi) + return -ENODEV; + + bus->msi->dev = &bus->dev; + return 0; +} + static int xgene_pcie_probe_bridge(struct platform_device *pdev) { struct device_node *dn = pdev->dev.of_node; @@ -504,6 +521,10 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev) if (!bus) return -ENOMEM; + if (IS_ENABLED(CONFIG_PCI_MSI)) + if (xgene_pcie_msi_enable(bus)) + dev_info(port->dev, "failed to enable MSI\n"); + pci_scan_child_bus(bus); pci_assign_unassigned_bus_resources(bus); pci_bus_add_devices(bus); diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index c3e7dfcf9ff5..fc54038495da 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -39,14 +39,13 @@ struct irq_domain * __weak arch_get_pci_msi_domain(struct pci_dev *dev) static struct irq_domain *pci_msi_get_domain(struct pci_dev *dev) { - struct irq_domain *domain = NULL; + struct irq_domain *domain; - if (dev->bus->msi) - domain = dev->bus->msi->domain; - if (!domain) - domain = arch_get_pci_msi_domain(dev); + domain = dev_get_msi_domain(&dev->dev); + if (domain) + return domain; - return domain; + return arch_get_pci_msi_domain(dev); } static int pci_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) @@ -1302,12 +1301,19 @@ struct irq_domain *pci_msi_create_irq_domain(struct device_node *node, struct msi_domain_info *info, struct irq_domain *parent) { + struct irq_domain *domain; + if (info->flags & MSI_FLAG_USE_DEF_DOM_OPS) pci_msi_domain_update_dom_ops(info); if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS) pci_msi_domain_update_chip_ops(info); - return msi_create_irq_domain(node, info, parent); + domain = msi_create_irq_domain(node, info, parent); + if (!domain) + return NULL; + + domain->bus_token = DOMAIN_BUS_PCI_MSI; + return domain; } /** diff --git a/drivers/pci/of.c b/drivers/pci/of.c index f0929934bb7a..2e99a500cb83 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/irqdomain.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/of.h> @@ -59,3 +60,32 @@ struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus) return of_node_get(bus->bridge->parent->of_node); return NULL; } + +struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus) +{ +#ifdef CONFIG_IRQ_DOMAIN + struct device_node *np; + struct irq_domain *d; + + if (!bus->dev.of_node) + return NULL; + + /* Start looking for a phandle to an MSI controller. */ + np = of_parse_phandle(bus->dev.of_node, "msi-parent", 0); + + /* + * If we don't have an msi-parent property, look for a domain + * directly attached to the host bridge. + */ + if (!np) + np = bus->dev.of_node; + + d = irq_find_matching_host(np, DOMAIN_BUS_PCI_MSI); + if (d) + return d; + + return irq_find_host(np); +#else + return NULL; +#endif +} diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index c91185721345..8a369ed5ea3f 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -661,6 +661,35 @@ static void pci_set_bus_speed(struct pci_bus *bus) } } +static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus) +{ + struct irq_domain *d; + + /* + * Any firmware interface that can resolve the msi_domain + * should be called from here. + */ + d = pci_host_bridge_of_msi_domain(bus); + + return d; +} + +static void pci_set_bus_msi_domain(struct pci_bus *bus) +{ + struct irq_domain *d; + + /* + * Either bus is the root, and we must obtain it from the + * firmware, or we inherit it from the bridge device. + */ + if (pci_is_root_bus(bus)) + d = pci_host_bridge_msi_domain(bus); + else + d = dev_get_msi_domain(&bus->self->dev); + + dev_set_msi_domain(&bus->dev, d); +} + static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr) { @@ -714,6 +743,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, bridge->subordinate = child; add_dev: + pci_set_bus_msi_domain(child); ret = device_register(&child->dev); WARN_ON(ret < 0); @@ -1508,6 +1538,17 @@ static void pci_init_capabilities(struct pci_dev *dev) pci_enable_acs(dev); } +static void pci_set_msi_domain(struct pci_dev *dev) +{ + /* + * If no domain has been set through the pcibios_add_device + * callback, inherit the default from the bus device. + */ + if (!dev_get_msi_domain(&dev->dev)) + dev_set_msi_domain(&dev->dev, + dev_get_msi_domain(&dev->bus->dev)); +} + void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) { int ret; @@ -1549,6 +1590,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) ret = pcibios_add_device(dev); WARN_ON(ret < 0); + /* Setup MSI irq domain */ + pci_set_msi_domain(dev); + /* Notifier could use PCI capabilities */ dev->match_driver = false; ret = device_add(&dev->dev); @@ -1939,6 +1983,7 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, b->bridge = get_device(&bridge->dev); device_enable_async_suspend(b->bridge); pci_set_bus_of_node(b); + pci_set_bus_msi_domain(b); if (!parent) set_dev_node(b->bridge, pcibus_to_node(b)); diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 594c918b553d..1ef02daddb60 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -372,7 +372,8 @@ static int acerhdf_bind(struct thermal_zone_device *thermal, return 0; if (thermal_zone_bind_cooling_device(thermal, 0, cdev, - THERMAL_NO_LIMIT, THERMAL_NO_LIMIT)) { + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT)) { pr_err("error binding cooling dev\n"); return -EINVAL; } diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index af40db0df58e..2acc88378099 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -42,6 +42,17 @@ config THERMAL_OF Say 'Y' here if you need to build thermal infrastructure based on device tree. +config THERMAL_WRITABLE_TRIPS + bool "Enable writable trip points" + help + This option allows the system integrator to choose whether + trip temperatures can be changed from userspace. The + writable trips need to be specified when setting up the + thermal zone but the choice here takes precedence. + + Say 'Y' here if you would like to allow userspace tools to + change trip temperatures. + choice prompt "Default Thermal governor" default THERMAL_DEFAULT_GOV_STEP_WISE @@ -71,6 +82,14 @@ config THERMAL_DEFAULT_GOV_USER_SPACE Select this if you want to let the user space manage the platform thermals. +config THERMAL_DEFAULT_GOV_POWER_ALLOCATOR + bool "power_allocator" + select THERMAL_GOV_POWER_ALLOCATOR + help + Select this if you want to control temperature based on + system and device power allocation. This governor can only + operate on cooling devices that implement the power API. + endchoice config THERMAL_GOV_FAIR_SHARE @@ -99,6 +118,13 @@ config THERMAL_GOV_USER_SPACE help Enable this to let the user space manage the platform thermals. +config THERMAL_GOV_POWER_ALLOCATOR + bool "Power allocator thermal governor" + select THERMAL_POWER_ACTOR + help + Enable this to manage platform thermals by dynamically + allocating and limiting power to devices. + config CPU_THERMAL bool "generic cpu cooling support" depends on CPU_FREQ diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index fa0dc486790f..cd769ab06cbb 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -14,6 +14,7 @@ thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o +thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += power_allocator.o # cpufreq cooling thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index f65f0d109fc8..6509c61b9648 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -26,10 +26,13 @@ #include <linux/thermal.h> #include <linux/cpufreq.h> #include <linux/err.h> +#include <linux/pm_opp.h> #include <linux/slab.h> #include <linux/cpu.h> #include <linux/cpu_cooling.h> +#include <trace/events/thermal.h> + /* * Cooling state <-> CPUFreq frequency * @@ -45,6 +48,19 @@ */ /** + * struct power_table - frequency to power conversion + * @frequency: frequency in KHz + * @power: power in mW + * + * This structure is built when the cooling device registers and helps + * in translating frequency to power and viceversa. + */ +struct power_table { + u32 frequency; + u32 power; +}; + +/** * struct cpufreq_cooling_device - data for cooling device with cpufreq * @id: unique integer value corresponding to each cpufreq_cooling_device * registered. @@ -58,6 +74,15 @@ * cpufreq frequencies. * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. * @node: list_head to link all cpufreq_cooling_device together. + * @last_load: load measured by the latest call to cpufreq_get_actual_power() + * @time_in_idle: previous reading of the absolute time that this cpu was idle + * @time_in_idle_timestamp: wall time of the last invocation of + * get_cpu_idle_time_us() + * @dyn_power_table: array of struct power_table for frequency to power + * conversion, sorted in ascending order. + * @dyn_power_table_entries: number of entries in the @dyn_power_table array + * @cpu_dev: the first cpu_device from @allowed_cpus that has OPPs registered + * @plat_get_static_power: callback to calculate the static power * * This structure is required for keeping information of each registered * cpufreq_cooling_device. @@ -71,6 +96,13 @@ struct cpufreq_cooling_device { unsigned int *freq_table; /* In descending order */ struct cpumask allowed_cpus; struct list_head node; + u32 last_load; + u64 *time_in_idle; + u64 *time_in_idle_timestamp; + struct power_table *dyn_power_table; + int dyn_power_table_entries; + struct device *cpu_dev; + get_static_t plat_get_static_power; }; static DEFINE_IDR(cpufreq_idr); static DEFINE_MUTEX(cooling_cpufreq_lock); @@ -186,23 +218,237 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, unsigned long max_freq = 0; struct cpufreq_cooling_device *cpufreq_dev; - if (event != CPUFREQ_ADJUST) - return 0; + switch (event) { - mutex_lock(&cooling_cpufreq_lock); - list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { - if (!cpumask_test_cpu(policy->cpu, - &cpufreq_dev->allowed_cpus)) + case CPUFREQ_ADJUST: + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { + if (!cpumask_test_cpu(policy->cpu, + &cpufreq_dev->allowed_cpus)) + continue; + + max_freq = cpufreq_dev->cpufreq_val; + + if (policy->max != max_freq) + cpufreq_verify_within_limits(policy, 0, + max_freq); + } + mutex_unlock(&cooling_cpufreq_lock); + break; + default: + return NOTIFY_DONE; + } + + return NOTIFY_OK; +} + +/** + * build_dyn_power_table() - create a dynamic power to frequency table + * @cpufreq_device: the cpufreq cooling device in which to store the table + * @capacitance: dynamic power coefficient for these cpus + * + * Build a dynamic power to frequency table for this cpu and store it + * in @cpufreq_device. This table will be used in cpu_power_to_freq() and + * cpu_freq_to_power() to convert between power and frequency + * efficiently. Power is stored in mW, frequency in KHz. The + * resulting table is in ascending order. + * + * Return: 0 on success, -E* on error. + */ +static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device, + u32 capacitance) +{ + struct power_table *power_table; + struct dev_pm_opp *opp; + struct device *dev = NULL; + int num_opps = 0, cpu, i, ret = 0; + unsigned long freq; + + rcu_read_lock(); + + for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { + dev = get_cpu_device(cpu); + if (!dev) { + dev_warn(&cpufreq_device->cool_dev->device, + "No cpu device for cpu %d\n", cpu); continue; + } + + num_opps = dev_pm_opp_get_opp_count(dev); + if (num_opps > 0) { + break; + } else if (num_opps < 0) { + ret = num_opps; + goto unlock; + } + } - max_freq = cpufreq_dev->cpufreq_val; + if (num_opps == 0) { + ret = -EINVAL; + goto unlock; + } - if (policy->max != max_freq) - cpufreq_verify_within_limits(policy, 0, max_freq); + power_table = kcalloc(num_opps, sizeof(*power_table), GFP_KERNEL); + if (!power_table) { + ret = -ENOMEM; + goto unlock; } - mutex_unlock(&cooling_cpufreq_lock); - return 0; + for (freq = 0, i = 0; + opp = dev_pm_opp_find_freq_ceil(dev, &freq), !IS_ERR(opp); + freq++, i++) { + u32 freq_mhz, voltage_mv; + u64 power; + + freq_mhz = freq / 1000000; + voltage_mv = dev_pm_opp_get_voltage(opp) / 1000; + + /* + * Do the multiplication with MHz and millivolt so as + * to not overflow. + */ + power = (u64)capacitance * freq_mhz * voltage_mv * voltage_mv; + do_div(power, 1000000000); + + /* frequency is stored in power_table in KHz */ + power_table[i].frequency = freq / 1000; + + /* power is stored in mW */ + power_table[i].power = power; + } + + if (i == 0) { + ret = PTR_ERR(opp); + goto unlock; + } + + cpufreq_device->cpu_dev = dev; + cpufreq_device->dyn_power_table = power_table; + cpufreq_device->dyn_power_table_entries = i; + +unlock: + rcu_read_unlock(); + return ret; +} + +static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_device, + u32 freq) +{ + int i; + struct power_table *pt = cpufreq_device->dyn_power_table; + + for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++) + if (freq < pt[i].frequency) + break; + + return pt[i - 1].power; +} + +static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_device, + u32 power) +{ + int i; + struct power_table *pt = cpufreq_device->dyn_power_table; + + for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++) + if (power < pt[i].power) + break; + + return pt[i - 1].frequency; +} + +/** + * get_load() - get load for a cpu since last updated + * @cpufreq_device: &struct cpufreq_cooling_device for this cpu + * @cpu: cpu number + * + * Return: The average load of cpu @cpu in percentage since this + * function was last called. + */ +static u32 get_load(struct cpufreq_cooling_device *cpufreq_device, int cpu) +{ + u32 load; + u64 now, now_idle, delta_time, delta_idle; + + now_idle = get_cpu_idle_time(cpu, &now, 0); + delta_idle = now_idle - cpufreq_device->time_in_idle[cpu]; + delta_time = now - cpufreq_device->time_in_idle_timestamp[cpu]; + + if (delta_time <= delta_idle) + load = 0; + else + load = div64_u64(100 * (delta_time - delta_idle), delta_time); + + cpufreq_device->time_in_idle[cpu] = now_idle; + cpufreq_device->time_in_idle_timestamp[cpu] = now; + + return load; +} + +/** + * get_static_power() - calculate the static power consumed by the cpus + * @cpufreq_device: struct &cpufreq_cooling_device for this cpu cdev + * @tz: thermal zone device in which we're operating + * @freq: frequency in KHz + * @power: pointer in which to store the calculated static power + * + * Calculate the static power consumed by the cpus described by + * @cpu_actor running at frequency @freq. This function relies on a + * platform specific function that should have been provided when the + * actor was registered. If it wasn't, the static power is assumed to + * be negligible. The calculated static power is stored in @power. + * + * Return: 0 on success, -E* on failure. + */ +static int get_static_power(struct cpufreq_cooling_device *cpufreq_device, + struct thermal_zone_device *tz, unsigned long freq, + u32 *power) +{ + struct dev_pm_opp *opp; + unsigned long voltage; + struct cpumask *cpumask = &cpufreq_device->allowed_cpus; + unsigned long freq_hz = freq * 1000; + + if (!cpufreq_device->plat_get_static_power || + !cpufreq_device->cpu_dev) { + *power = 0; + return 0; + } + + rcu_read_lock(); + + opp = dev_pm_opp_find_freq_exact(cpufreq_device->cpu_dev, freq_hz, + true); + voltage = dev_pm_opp_get_voltage(opp); + + rcu_read_unlock(); + + if (voltage == 0) { + dev_warn_ratelimited(cpufreq_device->cpu_dev, + "Failed to get voltage for frequency %lu: %ld\n", + freq_hz, IS_ERR(opp) ? PTR_ERR(opp) : 0); + return -EINVAL; + } + + return cpufreq_device->plat_get_static_power(cpumask, tz->passive_delay, + voltage, power); +} + +/** + * get_dynamic_power() - calculate the dynamic power + * @cpufreq_device: &cpufreq_cooling_device for this cdev + * @freq: current frequency + * + * Return: the dynamic power consumed by the cpus described by + * @cpufreq_device. + */ +static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_device, + unsigned long freq) +{ + u32 raw_cpu_power; + + raw_cpu_power = cpu_freq_to_power(cpufreq_device, freq); + return (raw_cpu_power * cpufreq_device->last_load) / 100; } /* cpufreq cooling device callback functions are defined below */ @@ -280,8 +526,205 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, return 0; } +/** + * cpufreq_get_requested_power() - get the current power + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @power: pointer in which to store the resulting power + * + * Calculate the current power consumption of the cpus in milliwatts + * and store it in @power. This function should actually calculate + * the requested power, but it's hard to get the frequency that + * cpufreq would have assigned if there were no thermal limits. + * Instead, we calculate the current power on the assumption that the + * immediate future will look like the immediate past. + * + * We use the current frequency and the average load since this + * function was last called. In reality, there could have been + * multiple opps since this function was last called and that affects + * the load calculation. While it's not perfectly accurate, this + * simplification is good enough and works. REVISIT this, as more + * complex code may be needed if experiments show that it's not + * accurate enough. + * + * Return: 0 on success, -E* if getting the static power failed. + */ +static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, + u32 *power) +{ + unsigned long freq; + int i = 0, cpu, ret; + u32 static_power, dynamic_power, total_load = 0; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + u32 *load_cpu = NULL; + + cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask); + + /* + * All the CPUs are offline, thus the requested power by + * the cdev is 0 + */ + if (cpu >= nr_cpu_ids) { + *power = 0; + return 0; + } + + freq = cpufreq_quick_get(cpu); + + if (trace_thermal_power_cpu_get_power_enabled()) { + u32 ncpus = cpumask_weight(&cpufreq_device->allowed_cpus); + + load_cpu = devm_kcalloc(&cdev->device, ncpus, sizeof(*load_cpu), + GFP_KERNEL); + } + + for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { + u32 load; + + if (cpu_online(cpu)) + load = get_load(cpufreq_device, cpu); + else + load = 0; + + total_load += load; + if (trace_thermal_power_cpu_limit_enabled() && load_cpu) + load_cpu[i] = load; + + i++; + } + + cpufreq_device->last_load = total_load; + + dynamic_power = get_dynamic_power(cpufreq_device, freq); + ret = get_static_power(cpufreq_device, tz, freq, &static_power); + if (ret) { + if (load_cpu) + devm_kfree(&cdev->device, load_cpu); + return ret; + } + + if (load_cpu) { + trace_thermal_power_cpu_get_power( + &cpufreq_device->allowed_cpus, + freq, load_cpu, i, dynamic_power, static_power); + + devm_kfree(&cdev->device, load_cpu); + } + + *power = static_power + dynamic_power; + return 0; +} + +/** + * cpufreq_state2power() - convert a cpu cdev state to power consumed + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @state: cooling device state to be converted + * @power: pointer in which to store the resulting power + * + * Convert cooling device state @state into power consumption in + * milliwatts assuming 100% load. Store the calculated power in + * @power. + * + * Return: 0 on success, -EINVAL if the cooling device state could not + * be converted into a frequency or other -E* if there was an error + * when calculating the static power. + */ +static int cpufreq_state2power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, + unsigned long state, u32 *power) +{ + unsigned int freq, num_cpus; + cpumask_t cpumask; + u32 static_power, dynamic_power; + int ret; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + + cpumask_and(&cpumask, &cpufreq_device->allowed_cpus, cpu_online_mask); + num_cpus = cpumask_weight(&cpumask); + + /* None of our cpus are online, so no power */ + if (num_cpus == 0) { + *power = 0; + return 0; + } + + freq = cpufreq_device->freq_table[state]; + if (!freq) + return -EINVAL; + + dynamic_power = cpu_freq_to_power(cpufreq_device, freq) * num_cpus; + ret = get_static_power(cpufreq_device, tz, freq, &static_power); + if (ret) + return ret; + + *power = static_power + dynamic_power; + return 0; +} + +/** + * cpufreq_power2state() - convert power to a cooling device state + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @power: power in milliwatts to be converted + * @state: pointer in which to store the resulting state + * + * Calculate a cooling device state for the cpus described by @cdev + * that would allow them to consume at most @power mW and store it in + * @state. Note that this calculation depends on external factors + * such as the cpu load or the current static power. Calling this + * function with the same power as input can yield different cooling + * device states depending on those external factors. + * + * Return: 0 on success, -ENODEV if no cpus are online or -EINVAL if + * the calculated frequency could not be converted to a valid state. + * The latter should not happen unless the frequencies available to + * cpufreq have changed since the initialization of the cpu cooling + * device. + */ +static int cpufreq_power2state(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 power, + unsigned long *state) +{ + unsigned int cpu, cur_freq, target_freq; + int ret; + s32 dyn_power; + u32 last_load, normalised_power, static_power; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + + cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask); + + /* None of our cpus are online */ + if (cpu >= nr_cpu_ids) + return -ENODEV; + + cur_freq = cpufreq_quick_get(cpu); + ret = get_static_power(cpufreq_device, tz, cur_freq, &static_power); + if (ret) + return ret; + + dyn_power = power - static_power; + dyn_power = dyn_power > 0 ? dyn_power : 0; + last_load = cpufreq_device->last_load ?: 1; + normalised_power = (dyn_power * 100) / last_load; + target_freq = cpu_power_to_freq(cpufreq_device, normalised_power); + + *state = cpufreq_cooling_get_level(cpu, target_freq); + if (*state == THERMAL_CSTATE_INVALID) { + dev_warn_ratelimited(&cdev->device, + "Failed to convert %dKHz for cpu %d into a cdev state\n", + target_freq, cpu); + return -EINVAL; + } + + trace_thermal_power_cpu_limit(&cpufreq_device->allowed_cpus, + target_freq, *state, power); + return 0; +} + /* Bind cpufreq callbacks to thermal cooling device ops */ -static struct thermal_cooling_device_ops const cpufreq_cooling_ops = { +static struct thermal_cooling_device_ops cpufreq_cooling_ops = { .get_max_state = cpufreq_get_max_state, .get_cur_state = cpufreq_get_cur_state, .set_cur_state = cpufreq_set_cur_state, @@ -311,6 +754,9 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, * @np: a valid struct device_node to the cooling device device tree node * @clip_cpus: cpumask of cpus where the frequency constraints will happen. * Normally this should be same as cpufreq policy->related_cpus. + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -322,13 +768,14 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, */ static struct thermal_cooling_device * __cpufreq_cooling_register(struct device_node *np, - const struct cpumask *clip_cpus) + const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) { struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev; char dev_name[THERMAL_NAME_LENGTH]; struct cpufreq_frequency_table *pos, *table; - unsigned int freq, i; + unsigned int freq, i, num_cpus; int ret; table = cpufreq_frequency_get_table(cpumask_first(clip_cpus)); @@ -341,6 +788,23 @@ __cpufreq_cooling_register(struct device_node *np, if (!cpufreq_dev) return ERR_PTR(-ENOMEM); + num_cpus = cpumask_weight(clip_cpus); + cpufreq_dev->time_in_idle = kcalloc(num_cpus, + sizeof(*cpufreq_dev->time_in_idle), + GFP_KERNEL); + if (!cpufreq_dev->time_in_idle) { + cool_dev = ERR_PTR(-ENOMEM); + goto free_cdev; + } + + cpufreq_dev->time_in_idle_timestamp = + kcalloc(num_cpus, sizeof(*cpufreq_dev->time_in_idle_timestamp), + GFP_KERNEL); + if (!cpufreq_dev->time_in_idle_timestamp) { + cool_dev = ERR_PTR(-ENOMEM); + goto free_time_in_idle; + } + /* Find max levels */ cpufreq_for_each_valid_entry(pos, table) cpufreq_dev->max_level++; @@ -349,7 +813,7 @@ __cpufreq_cooling_register(struct device_node *np, cpufreq_dev->max_level, GFP_KERNEL); if (!cpufreq_dev->freq_table) { cool_dev = ERR_PTR(-ENOMEM); - goto free_cdev; + goto free_time_in_idle_timestamp; } /* max_level is an index, not a counter */ @@ -357,6 +821,20 @@ __cpufreq_cooling_register(struct device_node *np, cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); + if (capacitance) { + cpufreq_cooling_ops.get_requested_power = + cpufreq_get_requested_power; + cpufreq_cooling_ops.state2power = cpufreq_state2power; + cpufreq_cooling_ops.power2state = cpufreq_power2state; + cpufreq_dev->plat_get_static_power = plat_static_func; + + ret = build_dyn_power_table(cpufreq_dev, capacitance); + if (ret) { + cool_dev = ERR_PTR(ret); + goto free_table; + } + } + ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); if (ret) { cool_dev = ERR_PTR(ret); @@ -402,6 +880,10 @@ remove_idr: release_idr(&cpufreq_idr, cpufreq_dev->id); free_table: kfree(cpufreq_dev->freq_table); +free_time_in_idle_timestamp: + kfree(cpufreq_dev->time_in_idle_timestamp); +free_time_in_idle: + kfree(cpufreq_dev->time_in_idle); free_cdev: kfree(cpufreq_dev); @@ -422,7 +904,7 @@ free_cdev: struct thermal_cooling_device * cpufreq_cooling_register(const struct cpumask *clip_cpus) { - return __cpufreq_cooling_register(NULL, clip_cpus); + return __cpufreq_cooling_register(NULL, clip_cpus, 0, NULL); } EXPORT_SYMBOL_GPL(cpufreq_cooling_register); @@ -446,11 +928,78 @@ of_cpufreq_cooling_register(struct device_node *np, if (!np) return ERR_PTR(-EINVAL); - return __cpufreq_cooling_register(np, clip_cpus); + return __cpufreq_cooling_register(np, clip_cpus, 0, NULL); } EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); /** + * cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) + * + * This interface function registers the cpufreq cooling device with + * the name "thermal-cpufreq-%x". This api can support multiple + * instances of cpufreq cooling devices. Using this function, the + * cooling device will implement the power extensions by using a + * simple cpu power model. The cpus must have registered their OPPs + * using the OPP library. + * + * An optional @plat_static_func may be provided to calculate the + * static power consumed by these cpus. If the platform's static + * power consumption is unknown or negligible, make it NULL. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) +{ + return __cpufreq_cooling_register(NULL, clip_cpus, capacitance, + plat_static_func); +} +EXPORT_SYMBOL(cpufreq_power_cooling_register); + +/** + * of_cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions + * @np: a valid struct device_node to the cooling device device tree node + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) + * + * This interface function registers the cpufreq cooling device with + * the name "thermal-cpufreq-%x". This api can support multiple + * instances of cpufreq cooling devices. Using this API, the cpufreq + * cooling device will be linked to the device tree node provided. + * Using this function, the cooling device will implement the power + * extensions by using a simple cpu power model. The cpus must have + * registered their OPPs using the OPP library. + * + * An optional @plat_static_func may be provided to calculate the + * static power consumed by these cpus. If the platform's static + * power consumption is unknown or negligible, make it NULL. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + if (!np) + return ERR_PTR(-EINVAL); + + return __cpufreq_cooling_register(np, clip_cpus, capacitance, + plat_static_func); +} +EXPORT_SYMBOL(of_cpufreq_power_cooling_register); + +/** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. * @@ -475,6 +1024,8 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) thermal_cooling_device_unregister(cpufreq_dev->cool_dev); release_idr(&cpufreq_idr, cpufreq_dev->id); + kfree(cpufreq_dev->time_in_idle_timestamp); + kfree(cpufreq_dev->time_in_idle); kfree(cpufreq_dev->freq_table); kfree(cpufreq_dev); } diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c index 20adfbe27df1..2fb273c4baa9 100644 --- a/drivers/thermal/db8500_thermal.c +++ b/drivers/thermal/db8500_thermal.c @@ -76,7 +76,7 @@ static int db8500_cdev_bind(struct thermal_zone_device *thermal, upper = lower = i > max_state ? max_state : i; ret = thermal_zone_bind_cooling_device(thermal, i, cdev, - upper, lower); + upper, lower, THERMAL_WEIGHT_DEFAULT); dev_info(&cdev->device, "%s bind to %d: %d-%s\n", cdev->type, i, ret, ret ? "fail" : "succeed"); diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c index 6e0a3fbfae86..8c50b8d6afb7 100644 --- a/drivers/thermal/fair_share.c +++ b/drivers/thermal/fair_share.c @@ -59,13 +59,13 @@ static int get_trip_level(struct thermal_zone_device *tz) } static long get_target_state(struct thermal_zone_device *tz, - struct thermal_cooling_device *cdev, int weight, int level) + struct thermal_cooling_device *cdev, int percentage, int level) { unsigned long max_state; cdev->ops->get_max_state(cdev, &max_state); - return (long)(weight * level * max_state) / (100 * tz->trips); + return (long)(percentage * level * max_state) / (100 * tz->trips); } /** @@ -77,7 +77,7 @@ static long get_target_state(struct thermal_zone_device *tz, * * Parameters used for Throttling: * P1. max_state: Maximum throttle state exposed by the cooling device. - * P2. weight[i]/100: + * P2. percentage[i]/100: * How 'effective' the 'i'th device is, in cooling the given zone. * P3. cur_trip_level/max_no_of_trips: * This describes the extent to which the devices should be throttled. @@ -88,28 +88,33 @@ static long get_target_state(struct thermal_zone_device *tz, */ static int fair_share_throttle(struct thermal_zone_device *tz, int trip) { - const struct thermal_zone_params *tzp; - struct thermal_cooling_device *cdev; struct thermal_instance *instance; - int i; + int total_weight = 0; + int total_instance = 0; int cur_trip_level = get_trip_level(tz); - if (!tz->tzp || !tz->tzp->tbp) - return -EINVAL; + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip) + continue; + + total_weight += instance->weight; + total_instance++; + } - tzp = tz->tzp; + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + int percentage; + struct thermal_cooling_device *cdev = instance->cdev; - for (i = 0; i < tzp->num_tbps; i++) { - if (!tzp->tbp[i].cdev) + if (instance->trip != trip) continue; - cdev = tzp->tbp[i].cdev; - instance = get_thermal_instance(tz, cdev, trip); - if (!instance) - continue; + if (!total_weight) + percentage = 100 / total_instance; + else + percentage = (instance->weight * 100) / total_weight; - instance->target = get_target_state(tz, cdev, - tzp->tbp[i].weight, cur_trip_level); + instance->target = get_target_state(tz, cdev, percentage, + cur_trip_level); instance->cdev->updated = false; thermal_cdev_update(cdev); diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 2ccbc0788353..fde4c2876d14 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -306,7 +306,8 @@ static int imx_bind(struct thermal_zone_device *tz, ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev, THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); if (ret) { dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n", diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 668fb1bdea9e..b295b2b6c191 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -58,6 +58,8 @@ struct __thermal_bind_params { * @mode: current thermal zone device mode (enabled/disabled) * @passive_delay: polling interval while passive cooling is activated * @polling_delay: zone polling interval + * @slope: slope of the temperature adjustment curve + * @offset: offset of the temperature adjustment curve * @ntrips: number of trip points * @trips: an array of trip points (0..ntrips - 1) * @num_tbps: number of thermal bind params @@ -70,6 +72,8 @@ struct __thermal_zone { enum thermal_device_mode mode; int passive_delay; int polling_delay; + int slope; + int offset; /* trip data */ int ntrips; @@ -227,7 +231,8 @@ static int of_thermal_bind(struct thermal_zone_device *thermal, ret = thermal_zone_bind_cooling_device(thermal, tbp->trip_id, cdev, tbp->max, - tbp->min); + tbp->min, + tbp->usage); if (ret) return ret; } @@ -581,7 +586,7 @@ static int thermal_of_populate_bind_params(struct device_node *np, u32 prop; /* Default weight. Usage is optional */ - __tbp->usage = 0; + __tbp->usage = THERMAL_WEIGHT_DEFAULT; ret = of_property_read_u32(np, "contribution", &prop); if (ret == 0) __tbp->usage = prop; @@ -715,7 +720,7 @@ static int thermal_of_populate_trip(struct device_node *np, * @np parameter and fills the read data into a __thermal_zone data structure * and return this pointer. * - * TODO: Missing properties to parse: thermal-sensor-names and coefficients + * TODO: Missing properties to parse: thermal-sensor-names * * Return: On success returns a valid struct __thermal_zone, * otherwise, it returns a corresponding ERR_PTR(). Caller must @@ -727,7 +732,7 @@ thermal_of_build_thermal_zone(struct device_node *np) struct device_node *child = NULL, *gchild; struct __thermal_zone *tz; int ret, i; - u32 prop; + u32 prop, coef[2]; if (!np) { pr_err("no thermal zone np\n"); @@ -752,6 +757,20 @@ thermal_of_build_thermal_zone(struct device_node *np) } tz->polling_delay = prop; + /* + * REVIST: for now, the thermal framework supports only + * one sensor per thermal zone. Thus, we are considering + * only the first two values as slope and offset. + */ + ret = of_property_read_u32_array(np, "coefficients", coef, 2); + if (ret == 0) { + tz->slope = coef[0]; + tz->offset = coef[1]; + } else { + tz->slope = 1; + tz->offset = 0; + } + /* trips */ child = of_get_child_by_name(np, "trips"); @@ -865,6 +884,8 @@ int __init of_parse_thermal_zones(void) for_each_child_of_node(np, child) { struct thermal_zone_device *zone; struct thermal_zone_params *tzp; + int i, mask = 0; + u32 prop; /* Check whether child is enabled or not */ if (!of_device_is_available(child)) @@ -891,8 +912,18 @@ int __init of_parse_thermal_zones(void) /* No hwmon because there might be hwmon drivers registering */ tzp->no_hwmon = true; + if (!of_property_read_u32(child, "sustainable-power", &prop)) + tzp->sustainable_power = prop; + + for (i = 0; i < tz->ntrips; i++) + mask |= 1 << i; + + /* these two are left for temperature drivers to use */ + tzp->slope = tz->slope; + tzp->offset = tz->offset; + zone = thermal_zone_device_register(child->name, tz->ntrips, - 0, tz, + mask, tz, ops, tzp, tz->passive_delay, tz->polling_delay); diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c new file mode 100644 index 000000000000..251676902869 --- /dev/null +++ b/drivers/thermal/power_allocator.c @@ -0,0 +1,544 @@ +/* + * A power allocator to manage temperature + * + * Copyright (C) 2014 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "Power allocator: " fmt + +#include <linux/rculist.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +#define CREATE_TRACE_POINTS +#include <trace/events/thermal_power_allocator.h> + +#include "thermal_core.h" + +#define FRAC_BITS 10 +#define int_to_frac(x) ((x) << FRAC_BITS) +#define frac_to_int(x) ((x) >> FRAC_BITS) + +/** + * mul_frac() - multiply two fixed-point numbers + * @x: first multiplicand + * @y: second multiplicand + * + * Return: the result of multiplying two fixed-point numbers. The + * result is also a fixed-point number. + */ +static inline s64 mul_frac(s64 x, s64 y) +{ + return (x * y) >> FRAC_BITS; +} + +/** + * div_frac() - divide two fixed-point numbers + * @x: the dividend + * @y: the divisor + * + * Return: the result of dividing two fixed-point numbers. The + * result is also a fixed-point number. + */ +static inline s64 div_frac(s64 x, s64 y) +{ + return div_s64(x << FRAC_BITS, y); +} + +/** + * struct power_allocator_params - parameters for the power allocator governor + * @err_integral: accumulated error in the PID controller. + * @prev_err: error in the previous iteration of the PID controller. + * Used to calculate the derivative term. + * @trip_switch_on: first passive trip point of the thermal zone. The + * governor switches on when this trip point is crossed. + * @trip_max_desired_temperature: last passive trip point of the thermal + * zone. The temperature we are + * controlling for. + */ +struct power_allocator_params { + s64 err_integral; + s32 prev_err; + int trip_switch_on; + int trip_max_desired_temperature; +}; + +/** + * pid_controller() - PID controller + * @tz: thermal zone we are operating in + * @current_temp: the current temperature in millicelsius + * @control_temp: the target temperature in millicelsius + * @max_allocatable_power: maximum allocatable power for this thermal zone + * + * This PID controller increases the available power budget so that the + * temperature of the thermal zone gets as close as possible to + * @control_temp and limits the power if it exceeds it. k_po is the + * proportional term when we are overshooting, k_pu is the + * proportional term when we are undershooting. integral_cutoff is a + * threshold below which we stop accumulating the error. The + * accumulated error is only valid if the requested power will make + * the system warmer. If the system is mostly idle, there's no point + * in accumulating positive error. + * + * Return: The power budget for the next period. + */ +static u32 pid_controller(struct thermal_zone_device *tz, + unsigned long current_temp, + unsigned long control_temp, + u32 max_allocatable_power) +{ + s64 p, i, d, power_range; + s32 err, max_power_frac; + struct power_allocator_params *params = tz->governor_data; + + max_power_frac = int_to_frac(max_allocatable_power); + + err = ((s32)control_temp - (s32)current_temp); + err = int_to_frac(err); + + /* Calculate the proportional term */ + p = mul_frac(err < 0 ? tz->tzp->k_po : tz->tzp->k_pu, err); + + /* + * Calculate the integral term + * + * if the error is less than cut off allow integration (but + * the integral is limited to max power) + */ + i = mul_frac(tz->tzp->k_i, params->err_integral); + + if (err < int_to_frac(tz->tzp->integral_cutoff)) { + s64 i_next = i + mul_frac(tz->tzp->k_i, err); + + if (abs64(i_next) < max_power_frac) { + i = i_next; + params->err_integral += err; + } + } + + /* + * Calculate the derivative term + * + * We do err - prev_err, so with a positive k_d, a decreasing + * error (i.e. driving closer to the line) results in less + * power being applied, slowing down the controller) + */ + d = mul_frac(tz->tzp->k_d, err - params->prev_err); + d = div_frac(d, tz->passive_delay); + params->prev_err = err; + + power_range = p + i + d; + + /* feed-forward the known sustainable dissipatable power */ + power_range = tz->tzp->sustainable_power + frac_to_int(power_range); + + power_range = clamp(power_range, (s64)0, (s64)max_allocatable_power); + + trace_thermal_power_allocator_pid(tz, frac_to_int(err), + frac_to_int(params->err_integral), + frac_to_int(p), frac_to_int(i), + frac_to_int(d), power_range); + + return power_range; +} + +/** + * divvy_up_power() - divvy the allocated power between the actors + * @req_power: each actor's requested power + * @max_power: each actor's maximum available power + * @num_actors: size of the @req_power, @max_power and @granted_power's array + * @total_req_power: sum of @req_power + * @power_range: total allocated power + * @granted_power: output array: each actor's granted power + * @extra_actor_power: an appropriately sized array to be used in the + * function as temporary storage of the extra power given + * to the actors + * + * This function divides the total allocated power (@power_range) + * fairly between the actors. It first tries to give each actor a + * share of the @power_range according to how much power it requested + * compared to the rest of the actors. For example, if only one actor + * requests power, then it receives all the @power_range. If + * three actors each requests 1mW, each receives a third of the + * @power_range. + * + * If any actor received more than their maximum power, then that + * surplus is re-divvied among the actors based on how far they are + * from their respective maximums. + * + * Granted power for each actor is written to @granted_power, which + * should've been allocated by the calling function. + */ +static void divvy_up_power(u32 *req_power, u32 *max_power, int num_actors, + u32 total_req_power, u32 power_range, + u32 *granted_power, u32 *extra_actor_power) +{ + u32 extra_power, capped_extra_power; + int i; + + /* + * Prevent division by 0 if none of the actors request power. + */ + if (!total_req_power) + total_req_power = 1; + + capped_extra_power = 0; + extra_power = 0; + for (i = 0; i < num_actors; i++) { + u64 req_range = req_power[i] * power_range; + + granted_power[i] = DIV_ROUND_CLOSEST_ULL(req_range, + total_req_power); + + if (granted_power[i] > max_power[i]) { + extra_power += granted_power[i] - max_power[i]; + granted_power[i] = max_power[i]; + } + + extra_actor_power[i] = max_power[i] - granted_power[i]; + capped_extra_power += extra_actor_power[i]; + } + + if (!extra_power) + return; + + /* + * Re-divvy the reclaimed extra among actors based on + * how far they are from the max + */ + extra_power = min(extra_power, capped_extra_power); + if (capped_extra_power > 0) + for (i = 0; i < num_actors; i++) + granted_power[i] += (extra_actor_power[i] * + extra_power) / capped_extra_power; +} + +static int allocate_power(struct thermal_zone_device *tz, + unsigned long current_temp, + unsigned long control_temp) +{ + struct thermal_instance *instance; + struct power_allocator_params *params = tz->governor_data; + u32 *req_power, *max_power, *granted_power, *extra_actor_power; + u32 *weighted_req_power; + u32 total_req_power, max_allocatable_power, total_weighted_req_power; + u32 total_granted_power, power_range; + int i, num_actors, total_weight, ret = 0; + int trip_max_desired_temperature = params->trip_max_desired_temperature; + + mutex_lock(&tz->lock); + + num_actors = 0; + total_weight = 0; + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if ((instance->trip == trip_max_desired_temperature) && + cdev_is_power_actor(instance->cdev)) { + num_actors++; + total_weight += instance->weight; + } + } + + /* + * We need to allocate five arrays of the same size: + * req_power, max_power, granted_power, extra_actor_power and + * weighted_req_power. They are going to be needed until this + * function returns. Allocate them all in one go to simplify + * the allocation and deallocation logic. + */ + BUILD_BUG_ON(sizeof(*req_power) != sizeof(*max_power)); + BUILD_BUG_ON(sizeof(*req_power) != sizeof(*granted_power)); + BUILD_BUG_ON(sizeof(*req_power) != sizeof(*extra_actor_power)); + BUILD_BUG_ON(sizeof(*req_power) != sizeof(*weighted_req_power)); + req_power = kcalloc(num_actors * 5, sizeof(*req_power), GFP_KERNEL); + if (!req_power) { + ret = -ENOMEM; + goto unlock; + } + + max_power = &req_power[num_actors]; + granted_power = &req_power[2 * num_actors]; + extra_actor_power = &req_power[3 * num_actors]; + weighted_req_power = &req_power[4 * num_actors]; + + i = 0; + total_weighted_req_power = 0; + total_req_power = 0; + max_allocatable_power = 0; + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + int weight; + struct thermal_cooling_device *cdev = instance->cdev; + + if (instance->trip != trip_max_desired_temperature) + continue; + + if (!cdev_is_power_actor(cdev)) + continue; + + if (cdev->ops->get_requested_power(cdev, tz, &req_power[i])) + continue; + + if (!total_weight) + weight = 1 << FRAC_BITS; + else + weight = instance->weight; + + weighted_req_power[i] = frac_to_int(weight * req_power[i]); + + if (power_actor_get_max_power(cdev, tz, &max_power[i])) + continue; + + total_req_power += req_power[i]; + max_allocatable_power += max_power[i]; + total_weighted_req_power += weighted_req_power[i]; + + i++; + } + + power_range = pid_controller(tz, current_temp, control_temp, + max_allocatable_power); + + divvy_up_power(weighted_req_power, max_power, num_actors, + total_weighted_req_power, power_range, granted_power, + extra_actor_power); + + total_granted_power = 0; + i = 0; + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip_max_desired_temperature) + continue; + + if (!cdev_is_power_actor(instance->cdev)) + continue; + + power_actor_set_power(instance->cdev, instance, + granted_power[i]); + total_granted_power += granted_power[i]; + + i++; + } + + trace_thermal_power_allocator(tz, req_power, total_req_power, + granted_power, total_granted_power, + num_actors, power_range, + max_allocatable_power, current_temp, + (s32)control_temp - (s32)current_temp); + + kfree(req_power); +unlock: + mutex_unlock(&tz->lock); + + return ret; +} + +static int get_governor_trips(struct thermal_zone_device *tz, + struct power_allocator_params *params) +{ + int i, ret, last_passive; + bool found_first_passive; + + found_first_passive = false; + last_passive = -1; + ret = -EINVAL; + + for (i = 0; i < tz->trips; i++) { + enum thermal_trip_type type; + + ret = tz->ops->get_trip_type(tz, i, &type); + if (ret) + return ret; + + if (!found_first_passive) { + if (type == THERMAL_TRIP_PASSIVE) { + params->trip_switch_on = i; + found_first_passive = true; + } + } else if (type == THERMAL_TRIP_PASSIVE) { + last_passive = i; + } else { + break; + } + } + + if (last_passive != -1) { + params->trip_max_desired_temperature = last_passive; + ret = 0; + } else { + ret = -EINVAL; + } + + return ret; +} + +static void reset_pid_controller(struct power_allocator_params *params) +{ + params->err_integral = 0; + params->prev_err = 0; +} + +static void allow_maximum_power(struct thermal_zone_device *tz) +{ + struct thermal_instance *instance; + struct power_allocator_params *params = tz->governor_data; + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if ((instance->trip != params->trip_max_desired_temperature) || + (!cdev_is_power_actor(instance->cdev))) + continue; + + instance->target = 0; + instance->cdev->updated = false; + thermal_cdev_update(instance->cdev); + } +} + +/** + * power_allocator_bind() - bind the power_allocator governor to a thermal zone + * @tz: thermal zone to bind it to + * + * Check that the thermal zone is valid for this governor, that is, it + * has two thermal trips. If so, initialize the PID controller + * parameters and bind it to the thermal zone. + * + * Return: 0 on success, -EINVAL if the trips were invalid or -ENOMEM + * if we ran out of memory. + */ +static int power_allocator_bind(struct thermal_zone_device *tz) +{ + int ret; + struct power_allocator_params *params; + unsigned long switch_on_temp, control_temp; + u32 temperature_threshold; + + if (!tz->tzp || !tz->tzp->sustainable_power) { + dev_err(&tz->device, + "power_allocator: missing sustainable_power\n"); + return -EINVAL; + } + + params = kzalloc(sizeof(*params), GFP_KERNEL); + if (!params) + return -ENOMEM; + + ret = get_governor_trips(tz, params); + if (ret) { + dev_err(&tz->device, + "thermal zone %s has wrong trip setup for power allocator\n", + tz->type); + goto free; + } + + ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, + &switch_on_temp); + if (ret) + goto free; + + ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature, + &control_temp); + if (ret) + goto free; + + temperature_threshold = control_temp - switch_on_temp; + + tz->tzp->k_po = tz->tzp->k_po ?: + int_to_frac(tz->tzp->sustainable_power) / temperature_threshold; + tz->tzp->k_pu = tz->tzp->k_pu ?: + int_to_frac(2 * tz->tzp->sustainable_power) / + temperature_threshold; + tz->tzp->k_i = tz->tzp->k_i ?: int_to_frac(10) / 1000; + /* + * The default for k_d and integral_cutoff is 0, so we can + * leave them as they are. + */ + + reset_pid_controller(params); + + tz->governor_data = params; + + return 0; + +free: + kfree(params); + return ret; +} + +static void power_allocator_unbind(struct thermal_zone_device *tz) +{ + dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id); + kfree(tz->governor_data); + tz->governor_data = NULL; +} + +static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) +{ + int ret; + unsigned long switch_on_temp, control_temp, current_temp; + struct power_allocator_params *params = tz->governor_data; + + /* + * We get called for every trip point but we only need to do + * our calculations once + */ + if (trip != params->trip_max_desired_temperature) + return 0; + + ret = thermal_zone_get_temp(tz, ¤t_temp); + if (ret) { + dev_warn(&tz->device, "Failed to get temperature: %d\n", ret); + return ret; + } + + ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, + &switch_on_temp); + if (ret) { + dev_warn(&tz->device, + "Failed to get switch on temperature: %d\n", ret); + return ret; + } + + if (current_temp < switch_on_temp) { + tz->passive = 0; + reset_pid_controller(params); + allow_maximum_power(tz); + return 0; + } + + tz->passive = 1; + + ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature, + &control_temp); + if (ret) { + dev_warn(&tz->device, + "Failed to get the maximum desired temperature: %d\n", + ret); + return ret; + } + + return allocate_power(tz, current_temp, control_temp); +} + +static struct thermal_governor thermal_gov_power_allocator = { + .name = "power_allocator", + .bind_to_tz = power_allocator_bind, + .unbind_from_tz = power_allocator_unbind, + .throttle = power_allocator_throttle, +}; + +int thermal_gov_power_allocator_register(void) +{ + return thermal_register_governor(&thermal_gov_power_allocator); +} + +void thermal_gov_power_allocator_unregister(void) +{ + thermal_unregister_governor(&thermal_gov_power_allocator); +} diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 4108db7e10c1..04659bfb888b 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -75,6 +75,58 @@ static struct thermal_governor *__find_governor(const char *name) return NULL; } +/** + * bind_previous_governor() - bind the previous governor of the thermal zone + * @tz: a valid pointer to a struct thermal_zone_device + * @failed_gov_name: the name of the governor that failed to register + * + * Register the previous governor of the thermal zone after a new + * governor has failed to be bound. + */ +static void bind_previous_governor(struct thermal_zone_device *tz, + const char *failed_gov_name) +{ + if (tz->governor && tz->governor->bind_to_tz) { + if (tz->governor->bind_to_tz(tz)) { + dev_err(&tz->device, + "governor %s failed to bind and the previous one (%s) failed to bind again, thermal zone %s has no governor\n", + failed_gov_name, tz->governor->name, tz->type); + tz->governor = NULL; + } + } +} + +/** + * thermal_set_governor() - Switch to another governor + * @tz: a valid pointer to a struct thermal_zone_device + * @new_gov: pointer to the new governor + * + * Change the governor of thermal zone @tz. + * + * Return: 0 on success, an error if the new governor's bind_to_tz() failed. + */ +static int thermal_set_governor(struct thermal_zone_device *tz, + struct thermal_governor *new_gov) +{ + int ret = 0; + + if (tz->governor && tz->governor->unbind_from_tz) + tz->governor->unbind_from_tz(tz); + + if (new_gov && new_gov->bind_to_tz) { + ret = new_gov->bind_to_tz(tz); + if (ret) { + bind_previous_governor(tz, new_gov->name); + + return ret; + } + } + + tz->governor = new_gov; + + return ret; +} + int thermal_register_governor(struct thermal_governor *governor) { int err; @@ -107,8 +159,15 @@ int thermal_register_governor(struct thermal_governor *governor) name = pos->tzp->governor_name; - if (!strncasecmp(name, governor->name, THERMAL_NAME_LENGTH)) - pos->governor = governor; + if (!strncasecmp(name, governor->name, THERMAL_NAME_LENGTH)) { + int ret; + + ret = thermal_set_governor(pos, governor); + if (ret) + dev_err(&pos->device, + "Failed to set governor %s for thermal zone %s: %d\n", + governor->name, pos->type, ret); + } } mutex_unlock(&thermal_list_lock); @@ -134,7 +193,7 @@ void thermal_unregister_governor(struct thermal_governor *governor) list_for_each_entry(pos, &thermal_tz_list, node) { if (!strncasecmp(pos->governor->name, governor->name, THERMAL_NAME_LENGTH)) - pos->governor = NULL; + thermal_set_governor(pos, NULL); } mutex_unlock(&thermal_list_lock); @@ -218,7 +277,8 @@ static void print_bind_err_msg(struct thermal_zone_device *tz, static void __bind(struct thermal_zone_device *tz, int mask, struct thermal_cooling_device *cdev, - unsigned long *limits) + unsigned long *limits, + unsigned int weight) { int i, ret; @@ -233,7 +293,8 @@ static void __bind(struct thermal_zone_device *tz, int mask, upper = limits[i * 2 + 1]; } ret = thermal_zone_bind_cooling_device(tz, i, cdev, - upper, lower); + upper, lower, + weight); if (ret) print_bind_err_msg(tz, cdev, ret); } @@ -280,7 +341,8 @@ static void bind_cdev(struct thermal_cooling_device *cdev) continue; tzp->tbp[i].cdev = cdev; __bind(pos, tzp->tbp[i].trip_mask, cdev, - tzp->tbp[i].binding_limits); + tzp->tbp[i].binding_limits, + tzp->tbp[i].weight); } } @@ -319,7 +381,8 @@ static void bind_tz(struct thermal_zone_device *tz) continue; tzp->tbp[i].cdev = pos; __bind(tz, tzp->tbp[i].trip_mask, pos, - tzp->tbp[i].binding_limits); + tzp->tbp[i].binding_limits, + tzp->tbp[i].weight); } } exit: @@ -713,7 +776,8 @@ passive_store(struct device *dev, struct device_attribute *attr, thermal_zone_bind_cooling_device(tz, THERMAL_TRIPS_NONE, cdev, THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); } mutex_unlock(&thermal_list_lock); if (!tz->passive_delay) @@ -765,8 +829,9 @@ policy_store(struct device *dev, struct device_attribute *attr, if (!gov) goto exit; - tz->governor = gov; - ret = count; + ret = thermal_set_governor(tz, gov); + if (!ret) + ret = count; exit: mutex_unlock(&tz->lock); @@ -810,6 +875,158 @@ emul_temp_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store); #endif/*CONFIG_THERMAL_EMULATION*/ +static ssize_t +sustainable_power_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + if (tz->tzp) + return sprintf(buf, "%u\n", tz->tzp->sustainable_power); + else + return -EIO; +} + +static ssize_t +sustainable_power_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + u32 sustainable_power; + + if (!tz->tzp) + return -EIO; + + if (kstrtou32(buf, 10, &sustainable_power)) + return -EINVAL; + + tz->tzp->sustainable_power = sustainable_power; + + return count; +} +static DEVICE_ATTR(sustainable_power, S_IWUSR | S_IRUGO, sustainable_power_show, + sustainable_power_store); + +#define create_s32_tzp_attr(name) \ + static ssize_t \ + name##_show(struct device *dev, struct device_attribute *devattr, \ + char *buf) \ + { \ + struct thermal_zone_device *tz = to_thermal_zone(dev); \ + \ + if (tz->tzp) \ + return sprintf(buf, "%u\n", tz->tzp->name); \ + else \ + return -EIO; \ + } \ + \ + static ssize_t \ + name##_store(struct device *dev, struct device_attribute *devattr, \ + const char *buf, size_t count) \ + { \ + struct thermal_zone_device *tz = to_thermal_zone(dev); \ + s32 value; \ + \ + if (!tz->tzp) \ + return -EIO; \ + \ + if (kstrtos32(buf, 10, &value)) \ + return -EINVAL; \ + \ + tz->tzp->name = value; \ + \ + return count; \ + } \ + static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, name##_show, name##_store) + +create_s32_tzp_attr(k_po); +create_s32_tzp_attr(k_pu); +create_s32_tzp_attr(k_i); +create_s32_tzp_attr(k_d); +create_s32_tzp_attr(integral_cutoff); +create_s32_tzp_attr(slope); +create_s32_tzp_attr(offset); +#undef create_s32_tzp_attr + +static struct device_attribute *dev_tzp_attrs[] = { + &dev_attr_sustainable_power, + &dev_attr_k_po, + &dev_attr_k_pu, + &dev_attr_k_i, + &dev_attr_k_d, + &dev_attr_integral_cutoff, + &dev_attr_slope, + &dev_attr_offset, +}; + +static int create_tzp_attrs(struct device *dev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(dev_tzp_attrs); i++) { + int ret; + struct device_attribute *dev_attr = dev_tzp_attrs[i]; + + ret = device_create_file(dev, dev_attr); + if (ret) + return ret; + } + + return 0; +} + +/** + * power_actor_get_max_power() - get the maximum power that a cdev can consume + * @cdev: pointer to &thermal_cooling_device + * @tz: a valid thermal zone device pointer + * @max_power: pointer in which to store the maximum power + * + * Calculate the maximum power consumption in milliwats that the + * cooling device can currently consume and store it in @max_power. + * + * Return: 0 on success, -EINVAL if @cdev doesn't support the + * power_actor API or -E* on other error. + */ +int power_actor_get_max_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *max_power) +{ + if (!cdev_is_power_actor(cdev)) + return -EINVAL; + + return cdev->ops->state2power(cdev, tz, 0, max_power); +} + +/** + * power_actor_set_power() - limit the maximum power that a cooling device can consume + * @cdev: pointer to &thermal_cooling_device + * @instance: thermal instance to update + * @power: the power in milliwatts + * + * Set the cooling device to consume at most @power milliwatts. + * + * Return: 0 on success, -EINVAL if the cooling device does not + * implement the power actor API or -E* for other failures. + */ +int power_actor_set_power(struct thermal_cooling_device *cdev, + struct thermal_instance *instance, u32 power) +{ + unsigned long state; + int ret; + + if (!cdev_is_power_actor(cdev)) + return -EINVAL; + + ret = cdev->ops->power2state(cdev, instance->tz, power, &state); + if (ret) + return ret; + + instance->target = state; + cdev->updated = false; + thermal_cdev_update(cdev); + + return 0; +} + static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); @@ -917,6 +1134,34 @@ static const struct attribute_group *cooling_device_attr_groups[] = { NULL, }; +static ssize_t +thermal_cooling_device_weight_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_instance *instance; + + instance = container_of(attr, struct thermal_instance, weight_attr); + + return sprintf(buf, "%d\n", instance->weight); +} + +static ssize_t +thermal_cooling_device_weight_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_instance *instance; + int ret, weight; + + ret = kstrtoint(buf, 0, &weight); + if (ret) + return ret; + + instance = container_of(attr, struct thermal_instance, weight_attr); + instance->weight = weight; + + return count; +} /* Device management */ /** @@ -931,6 +1176,9 @@ static const struct attribute_group *cooling_device_attr_groups[] = { * @lower: the Minimum cooling state can be used for this trip point. * THERMAL_NO_LIMIT means no lower limit, * and the cooling device can be in cooling state 0. + * @weight: The weight of the cooling device to be bound to the + * thermal zone. Use THERMAL_WEIGHT_DEFAULT for the + * default value * * This interface function bind a thermal cooling device to the certain trip * point of a thermal zone device. @@ -941,7 +1189,8 @@ static const struct attribute_group *cooling_device_attr_groups[] = { int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev, - unsigned long upper, unsigned long lower) + unsigned long upper, unsigned long lower, + unsigned int weight) { struct thermal_instance *dev; struct thermal_instance *pos; @@ -986,6 +1235,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, dev->upper = upper; dev->lower = lower; dev->target = THERMAL_NO_TARGET; + dev->weight = weight; result = get_idr(&tz->idr, &tz->lock, &dev->id); if (result) @@ -1006,6 +1256,16 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, if (result) goto remove_symbol_link; + sprintf(dev->weight_attr_name, "cdev%d_weight", dev->id); + sysfs_attr_init(&dev->weight_attr.attr); + dev->weight_attr.attr.name = dev->weight_attr_name; + dev->weight_attr.attr.mode = S_IWUSR | S_IRUGO; + dev->weight_attr.show = thermal_cooling_device_weight_show; + dev->weight_attr.store = thermal_cooling_device_weight_store; + result = device_create_file(&tz->device, &dev->weight_attr); + if (result) + goto remove_trip_file; + mutex_lock(&tz->lock); mutex_lock(&cdev->lock); list_for_each_entry(pos, &tz->thermal_instances, tz_node) @@ -1023,6 +1283,8 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, if (!result) return 0; + device_remove_file(&tz->device, &dev->weight_attr); +remove_trip_file: device_remove_file(&tz->device, &dev->attr); remove_symbol_link: sysfs_remove_link(&tz->device.kobj, dev->name); @@ -1377,7 +1639,8 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask) tz->trip_temp_attrs[indx].name; tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO; tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show; - if (mask & (1 << indx)) { + if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS) && + mask & (1 << indx)) { tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR; tz->trip_temp_attrs[indx].attr.store = trip_point_temp_store; @@ -1454,7 +1717,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) struct thermal_zone_device *thermal_zone_device_register(const char *type, int trips, int mask, void *devdata, struct thermal_zone_device_ops *ops, - const struct thermal_zone_params *tzp, + struct thermal_zone_params *tzp, int passive_delay, int polling_delay) { struct thermal_zone_device *tz; @@ -1462,6 +1725,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, int result; int count; int passive = 0; + struct thermal_governor *governor; if (type && strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); @@ -1548,13 +1812,24 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, if (result) goto unregister; + /* Add thermal zone params */ + result = create_tzp_attrs(&tz->device); + if (result) + goto unregister; + /* Update 'this' zone's governor information */ mutex_lock(&thermal_governor_lock); if (tz->tzp) - tz->governor = __find_governor(tz->tzp->governor_name); + governor = __find_governor(tz->tzp->governor_name); else - tz->governor = def_governor; + governor = def_governor; + + result = thermal_set_governor(tz, governor); + if (result) { + mutex_unlock(&thermal_governor_lock); + goto unregister; + } mutex_unlock(&thermal_governor_lock); @@ -1643,7 +1918,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_remove_file(&tz->device, &dev_attr_mode); device_remove_file(&tz->device, &dev_attr_policy); remove_trip_attrs(tz); - tz->governor = NULL; + thermal_set_governor(tz, NULL); thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); @@ -1799,7 +2074,11 @@ static int __init thermal_register_governors(void) if (result) return result; - return thermal_gov_user_space_register(); + result = thermal_gov_user_space_register(); + if (result) + return result; + + return thermal_gov_power_allocator_register(); } static void thermal_unregister_governors(void) @@ -1808,6 +2087,7 @@ static void thermal_unregister_governors(void) thermal_gov_fair_share_unregister(); thermal_gov_bang_bang_unregister(); thermal_gov_user_space_unregister(); + thermal_gov_power_allocator_unregister(); } static int __init thermal_init(void) diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 8e391812e503..d7ac1fccd659 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -46,8 +46,11 @@ struct thermal_instance { unsigned long target; /* expected cooling state */ char attr_name[THERMAL_NAME_LENGTH]; struct device_attribute attr; + char weight_attr_name[THERMAL_NAME_LENGTH]; + struct device_attribute weight_attr; struct list_head tz_node; /* node in tz->thermal_instances */ struct list_head cdev_node; /* node in cdev->thermal_instances */ + unsigned int weight; /* The weight of the cooling device */ }; int thermal_register_governor(struct thermal_governor *); @@ -85,6 +88,14 @@ static inline int thermal_gov_user_space_register(void) { return 0; } static inline void thermal_gov_user_space_unregister(void) {} #endif /* CONFIG_THERMAL_GOV_USER_SPACE */ +#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR +int thermal_gov_power_allocator_register(void); +void thermal_gov_power_allocator_unregister(void); +#else +static inline int thermal_gov_power_allocator_register(void) { return 0; } +static inline void thermal_gov_power_allocator_unregister(void) {} +#endif /* CONFIG_THERMAL_GOV_POWER_ALLOCATOR */ + /* device tree support */ #ifdef CONFIG_THERMAL_OF int of_parse_thermal_zones(void); diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index a38c1756442a..cb45e729adb5 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -146,7 +146,8 @@ static int ti_thermal_bind(struct thermal_zone_device *thermal, return thermal_zone_bind_cooling_device(thermal, 0, cdev, /* bind with min and max states defined by cpu_cooling */ THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); } /* Unbind callback functions for thermal zone */ diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index bd955270d5aa..c156f5082758 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -28,6 +28,9 @@ #include <linux/thermal.h> #include <linux/cpumask.h> +typedef int (*get_static_t)(cpumask_t *cpumask, int interval, + unsigned long voltage, u32 *power); + #ifdef CONFIG_CPU_THERMAL /** * cpufreq_cooling_register - function to create cpufreq cooling device. @@ -36,6 +39,10 @@ struct thermal_cooling_device * cpufreq_cooling_register(const struct cpumask *clip_cpus); +struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, + u32 capacitance, get_static_t plat_static_func); + /** * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. * @np: a valid struct device_node to the cooling device device tree node. @@ -45,6 +52,12 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus); struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, const struct cpumask *clip_cpus); + +struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func); #else static inline struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, @@ -52,6 +65,15 @@ of_cpufreq_cooling_register(struct device_node *np, { return ERR_PTR(-ENOSYS); } + +static inline struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + return NULL; +} #endif /** @@ -68,11 +90,28 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus) return ERR_PTR(-ENOSYS); } static inline struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, + u32 capacitance, get_static_t plat_static_func) +{ + return NULL; +} + +static inline struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, const struct cpumask *clip_cpus) { return ERR_PTR(-ENOSYS); } + +static inline struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + return NULL; +} + static inline void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { diff --git a/include/linux/device.h b/include/linux/device.h index 6558af90c8fe..dda6d94ce986 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -683,6 +683,7 @@ struct device_dma_parameters { * along with subsystem-level and driver-level callbacks. * @pins: For device pin management. * See Documentation/pinctrl.txt for details. + * @msi_domain: The generic MSI domain this device is using. * @numa_node: NUMA node this device is close to. * @dma_mask: Dma mask (if dma'ble device). * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all @@ -743,6 +744,9 @@ struct device { struct dev_pm_info power; struct dev_pm_domain *pm_domain; +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN + struct irq_domain *msi_domain; +#endif #ifdef CONFIG_PINCTRL struct dev_pin_info *pins; #endif @@ -830,6 +834,22 @@ static inline void set_dev_node(struct device *dev, int node) } #endif +static inline struct irq_domain *dev_get_msi_domain(const struct device *dev) +{ +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN + return dev->msi_domain; +#else + return NULL; +#endif +} + +static inline void dev_set_msi_domain(struct device *dev, struct irq_domain *d) +{ +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN + dev->msi_domain = d; +#endif +} + static inline void *dev_get_drvdata(const struct device *dev) { return dev->driver_data; diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index ffbc034c8810..bf982e021fbd 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -360,6 +360,7 @@ #ifndef __ASSEMBLY__ #include <linux/stringify.h> +#include <asm/msi.h> /* * We need a value to serve as a irq-type for LPIs. Choose one that will diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h index 676d7306a360..3c5ca459ac98 100644 --- a/include/linux/irqdomain.h +++ b/include/linux/irqdomain.h @@ -45,6 +45,20 @@ struct irq_data; /* Number of irqs reserved for a legacy isa controller */ #define NUM_ISA_INTERRUPTS 16 +/* + * Should several domains have the same device node, but serve + * different purposes (for example one domain is for PCI/MSI, and the + * other for wired IRQs), they can be distinguished using a + * bus-specific token. Most domains are expected to only carry + * DOMAIN_BUS_ANY. + */ +enum irq_domain_bus_token { + DOMAIN_BUS_ANY = 0, + DOMAIN_BUS_PCI_MSI, + DOMAIN_BUS_PLATFORM_MSI, + DOMAIN_BUS_NEXUS, +}; + /** * struct irq_domain_ops - Methods for irq_domain objects * @match: Match an interrupt controller device node to a host, returns @@ -61,7 +75,8 @@ struct irq_data; * to setup the irq_desc when returning from map(). */ struct irq_domain_ops { - int (*match)(struct irq_domain *d, struct device_node *node); + int (*match)(struct irq_domain *d, struct device_node *node, + enum irq_domain_bus_token bus_token); int (*map)(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw); void (*unmap)(struct irq_domain *d, unsigned int virq); int (*xlate)(struct irq_domain *d, struct device_node *node, @@ -116,6 +131,7 @@ struct irq_domain { /* Optional data */ struct device_node *of_node; + enum irq_domain_bus_token bus_token; struct irq_domain_chip_generic *gc; #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY struct irq_domain *parent; @@ -161,9 +177,15 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node, irq_hw_number_t first_hwirq, const struct irq_domain_ops *ops, void *host_data); -extern struct irq_domain *irq_find_host(struct device_node *node); +extern struct irq_domain *irq_find_matching_host(struct device_node *node, + enum irq_domain_bus_token bus_token); extern void irq_set_default_host(struct irq_domain *host); +static inline struct irq_domain *irq_find_host(struct device_node *node) +{ + return irq_find_matching_host(node, DOMAIN_BUS_ANY); +} + /** * irq_domain_add_linear() - Allocate and register a linear revmap irq_domain. * @of_node: pointer to interrupt controller's device tree node. diff --git a/include/linux/msi.h b/include/linux/msi.h index 8ac4a68ffae2..692f217ae813 100644 --- a/include/linux/msi.h +++ b/include/linux/msi.h @@ -108,9 +108,6 @@ struct msi_controller { struct device *dev; struct device_node *of_node; struct list_head list; -#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN - struct irq_domain *domain; -#endif int (*setup_irq)(struct msi_controller *chip, struct pci_dev *dev, struct msi_desc *desc); diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index d884929a7747..4bcbd586a672 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -74,6 +74,7 @@ static inline int of_irq_to_resource_table(struct device_node *dev, */ extern unsigned int irq_of_parse_and_map(struct device_node *node, int index); extern struct device_node *of_irq_find_parent(struct device_node *child); +extern void of_msi_configure(struct device *dev, struct device_node *np); #else /* !CONFIG_OF */ static inline unsigned int irq_of_parse_and_map(struct device_node *dev, diff --git a/include/linux/pci.h b/include/linux/pci.h index 6e935e5eab56..661b48ae34b4 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1857,10 +1857,12 @@ int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off, /* PCI <-> OF binding helpers */ #ifdef CONFIG_OF struct device_node; +struct irq_domain; void pci_set_of_node(struct pci_dev *dev); void pci_release_of_node(struct pci_dev *dev); void pci_set_bus_of_node(struct pci_bus *bus); void pci_release_bus_of_node(struct pci_bus *bus); +struct irq_domain *pci_host_bridge_of_msi_domain(struct pci_bus *bus); /* Arch may override this (weak) */ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus); @@ -1883,6 +1885,8 @@ static inline void pci_set_bus_of_node(struct pci_bus *bus) { } static inline void pci_release_bus_of_node(struct pci_bus *bus) { } static inline struct device_node * pci_device_to_OF_node(const struct pci_dev *pdev) { return NULL; } +static inline struct irq_domain * +pci_host_bridge_of_msi_domain(struct pci_bus *bus) { return NULL; } #endif /* CONFIG_OF */ #ifdef CONFIG_EEH diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 5eac316490ea..037e9df2f610 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -40,6 +40,9 @@ /* No upper/lower limit requirement */ #define THERMAL_NO_LIMIT ((u32)~0) +/* Default weight of a bound cooling device */ +#define THERMAL_WEIGHT_DEFAULT 0 + /* Unit conversion macros */ #define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ ((long)t-2732+5)/10 : ((long)t-2732-5)/10) @@ -56,10 +59,13 @@ #define DEFAULT_THERMAL_GOVERNOR "fair_share" #elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE) #define DEFAULT_THERMAL_GOVERNOR "user_space" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR) +#define DEFAULT_THERMAL_GOVERNOR "power_allocator" #endif struct thermal_zone_device; struct thermal_cooling_device; +struct thermal_instance; enum thermal_device_mode { THERMAL_DEVICE_DISABLED = 0, @@ -113,6 +119,12 @@ struct thermal_cooling_device_ops { int (*get_max_state) (struct thermal_cooling_device *, unsigned long *); int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *); int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); + int (*get_requested_power)(struct thermal_cooling_device *, + struct thermal_zone_device *, u32 *); + int (*state2power)(struct thermal_cooling_device *, + struct thermal_zone_device *, unsigned long, u32 *); + int (*power2state)(struct thermal_cooling_device *, + struct thermal_zone_device *, u32, unsigned long *); }; struct thermal_cooling_device { @@ -144,8 +156,7 @@ struct thermal_attr { * @devdata: private pointer for device private data * @trips: number of trip points the thermal zone supports * @passive_delay: number of milliseconds to wait between polls when - * performing passive cooling. Currenty only used by the - * step-wise governor + * performing passive cooling. * @polling_delay: number of milliseconds to wait between polls when * checking whether trip points have been crossed (0 for * interrupt driven systems) @@ -155,13 +166,13 @@ struct thermal_attr { * @last_temperature: previous temperature read * @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION * @passive: 1 if you've crossed a passive trip point, 0 otherwise. - * Currenty only used by the step-wise governor. * @forced_passive: If > 0, temperature at which to switch on all ACPI * processor cooling devices. Currently only used by the * step-wise governor. * @ops: operations this &thermal_zone_device supports * @tzp: thermal zone parameters * @governor: pointer to the governor for this thermal zone + * @governor_data: private pointer for governor data * @thermal_instances: list of &struct thermal_instance of this thermal zone * @idr: &struct idr to generate unique id for this zone's cooling * devices @@ -186,8 +197,9 @@ struct thermal_zone_device { int passive; unsigned int forced_passive; struct thermal_zone_device_ops *ops; - const struct thermal_zone_params *tzp; + struct thermal_zone_params *tzp; struct thermal_governor *governor; + void *governor_data; struct list_head thermal_instances; struct idr idr; struct mutex lock; @@ -198,12 +210,19 @@ struct thermal_zone_device { /** * struct thermal_governor - structure that holds thermal governor information * @name: name of the governor + * @bind_to_tz: callback called when binding to a thermal zone. If it + * returns 0, the governor is bound to the thermal zone, + * otherwise it fails. + * @unbind_from_tz: callback called when a governor is unbound from a + * thermal zone. * @throttle: callback called for every trip point even if temperature is * below the trip point temperature * @governor_list: node in thermal_governor_list (in thermal_core.c) */ struct thermal_governor { char name[THERMAL_NAME_LENGTH]; + int (*bind_to_tz)(struct thermal_zone_device *tz); + void (*unbind_from_tz)(struct thermal_zone_device *tz); int (*throttle)(struct thermal_zone_device *tz, int trip); struct list_head governor_list; }; @@ -214,9 +233,12 @@ struct thermal_bind_params { /* * This is a measure of 'how effectively these devices can - * cool 'this' thermal zone. The shall be determined by platform - * characterization. This is on a 'percentage' scale. - * See Documentation/thermal/sysfs-api.txt for more information. + * cool 'this' thermal zone. It shall be determined by + * platform characterization. This value is relative to the + * rest of the weights so a cooling device whose weight is + * double that of another cooling device is twice as + * effective. See Documentation/thermal/sysfs-api.txt for more + * information. */ int weight; @@ -253,6 +275,44 @@ struct thermal_zone_params { int num_tbps; /* Number of tbp entries */ struct thermal_bind_params *tbp; + + /* + * Sustainable power (heat) that this thermal zone can dissipate in + * mW + */ + u32 sustainable_power; + + /* + * Proportional parameter of the PID controller when + * overshooting (i.e., when temperature is below the target) + */ + s32 k_po; + + /* + * Proportional parameter of the PID controller when + * undershooting + */ + s32 k_pu; + + /* Integral parameter of the PID controller */ + s32 k_i; + + /* Derivative parameter of the PID controller */ + s32 k_d; + + /* threshold below which the error is no longer accumulated */ + s32 integral_cutoff; + + /* + * @slope: slope of a linear temperature adjustment curve. + * Used by thermal zone drivers. + */ + int slope; + /* + * @offset: offset of a linear temperature adjustment curve. + * Used by thermal zone drivers (default 0). + */ + int offset; }; struct thermal_genl_event { @@ -316,14 +376,25 @@ void thermal_zone_of_sensor_unregister(struct device *dev, #endif #if IS_ENABLED(CONFIG_THERMAL) +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ + return cdev->ops->get_requested_power && cdev->ops->state2power && + cdev->ops->power2state; +} + +int power_actor_get_max_power(struct thermal_cooling_device *, + struct thermal_zone_device *tz, u32 *max_power); +int power_actor_set_power(struct thermal_cooling_device *, + struct thermal_instance *, u32); struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, struct thermal_zone_device_ops *, - const struct thermal_zone_params *, int, int); + struct thermal_zone_params *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *, - unsigned long, unsigned long); + unsigned long, unsigned long, + unsigned int); int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); @@ -343,6 +414,14 @@ struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, void thermal_cdev_update(struct thermal_cooling_device *); void thermal_notify_framework(struct thermal_zone_device *, int); #else +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ return false; } +static inline int power_actor_get_max_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *max_power) +{ return 0; } +static inline int power_actor_set_power(struct thermal_cooling_device *cdev, + struct thermal_instance *tz, u32 power) +{ return 0; } static inline struct thermal_zone_device *thermal_zone_device_register( const char *type, int trips, int mask, void *devdata, struct thermal_zone_device_ops *ops, diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h index 0f4f95d63c03..8b1f80682b80 100644 --- a/include/trace/events/thermal.h +++ b/include/trace/events/thermal.h @@ -77,6 +77,64 @@ TRACE_EVENT(thermal_zone_trip, __entry->trip_type) ); +TRACE_EVENT(thermal_power_cpu_get_power, + TP_PROTO(const struct cpumask *cpus, unsigned long freq, u32 *load, + size_t load_len, u32 dynamic_power, u32 static_power), + + TP_ARGS(cpus, freq, load, load_len, dynamic_power, static_power), + + TP_STRUCT__entry( + __bitmask(cpumask, num_possible_cpus()) + __field(unsigned long, freq ) + __dynamic_array(u32, load, load_len) + __field(size_t, load_len ) + __field(u32, dynamic_power ) + __field(u32, static_power ) + ), + + TP_fast_assign( + __assign_bitmask(cpumask, cpumask_bits(cpus), + num_possible_cpus()); + __entry->freq = freq; + memcpy(__get_dynamic_array(load), load, + load_len * sizeof(*load)); + __entry->load_len = load_len; + __entry->dynamic_power = dynamic_power; + __entry->static_power = static_power; + ), + + TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d static_power=%d", + __get_bitmask(cpumask), __entry->freq, + __print_array(__get_dynamic_array(load), __entry->load_len, 4), + __entry->dynamic_power, __entry->static_power) +); + +TRACE_EVENT(thermal_power_cpu_limit, + TP_PROTO(const struct cpumask *cpus, unsigned int freq, + unsigned long cdev_state, u32 power), + + TP_ARGS(cpus, freq, cdev_state, power), + + TP_STRUCT__entry( + __bitmask(cpumask, num_possible_cpus()) + __field(unsigned int, freq ) + __field(unsigned long, cdev_state) + __field(u32, power ) + ), + + TP_fast_assign( + __assign_bitmask(cpumask, cpumask_bits(cpus), + num_possible_cpus()); + __entry->freq = freq; + __entry->cdev_state = cdev_state; + __entry->power = power; + ), + + TP_printk("cpus=%s freq=%u cdev_state=%lu power=%u", + __get_bitmask(cpumask), __entry->freq, __entry->cdev_state, + __entry->power) +); + #endif /* _TRACE_THERMAL_H */ /* This part must be outside protection */ diff --git a/include/trace/events/thermal_power_allocator.h b/include/trace/events/thermal_power_allocator.h new file mode 100644 index 000000000000..12e1321c4e0c --- /dev/null +++ b/include/trace/events/thermal_power_allocator.h @@ -0,0 +1,87 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM thermal_power_allocator + +#if !defined(_TRACE_THERMAL_POWER_ALLOCATOR_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_THERMAL_POWER_ALLOCATOR_H + +#include <linux/tracepoint.h> + +TRACE_EVENT(thermal_power_allocator, + TP_PROTO(struct thermal_zone_device *tz, u32 *req_power, + u32 total_req_power, u32 *granted_power, + u32 total_granted_power, size_t num_actors, + u32 power_range, u32 max_allocatable_power, + unsigned long current_temp, s32 delta_temp), + TP_ARGS(tz, req_power, total_req_power, granted_power, + total_granted_power, num_actors, power_range, + max_allocatable_power, current_temp, delta_temp), + TP_STRUCT__entry( + __field(int, tz_id ) + __dynamic_array(u32, req_power, num_actors ) + __field(u32, total_req_power ) + __dynamic_array(u32, granted_power, num_actors) + __field(u32, total_granted_power ) + __field(size_t, num_actors ) + __field(u32, power_range ) + __field(u32, max_allocatable_power ) + __field(unsigned long, current_temp ) + __field(s32, delta_temp ) + ), + TP_fast_assign( + __entry->tz_id = tz->id; + memcpy(__get_dynamic_array(req_power), req_power, + num_actors * sizeof(*req_power)); + __entry->total_req_power = total_req_power; + memcpy(__get_dynamic_array(granted_power), granted_power, + num_actors * sizeof(*granted_power)); + __entry->total_granted_power = total_granted_power; + __entry->num_actors = num_actors; + __entry->power_range = power_range; + __entry->max_allocatable_power = max_allocatable_power; + __entry->current_temp = current_temp; + __entry->delta_temp = delta_temp; + ), + + TP_printk("thermal_zone_id=%d req_power={%s} total_req_power=%u granted_power={%s} total_granted_power=%u power_range=%u max_allocatable_power=%u current_temperature=%lu delta_temperature=%d", + __entry->tz_id, + __print_array(__get_dynamic_array(req_power), + __entry->num_actors, 4), + __entry->total_req_power, + __print_array(__get_dynamic_array(granted_power), + __entry->num_actors, 4), + __entry->total_granted_power, __entry->power_range, + __entry->max_allocatable_power, __entry->current_temp, + __entry->delta_temp) +); + +TRACE_EVENT(thermal_power_allocator_pid, + TP_PROTO(struct thermal_zone_device *tz, s32 err, s32 err_integral, + s64 p, s64 i, s64 d, s32 output), + TP_ARGS(tz, err, err_integral, p, i, d, output), + TP_STRUCT__entry( + __field(int, tz_id ) + __field(s32, err ) + __field(s32, err_integral) + __field(s64, p ) + __field(s64, i ) + __field(s64, d ) + __field(s32, output ) + ), + TP_fast_assign( + __entry->tz_id = tz->id; + __entry->err = err; + __entry->err_integral = err_integral; + __entry->p = p; + __entry->i = i; + __entry->d = d; + __entry->output = output; + ), + + TP_printk("thermal_zone_id=%d err=%d err_integral=%d p=%lld i=%lld d=%lld output=%d", + __entry->tz_id, __entry->err, __entry->err_integral, + __entry->p, __entry->i, __entry->d, __entry->output) +); +#endif /* _TRACE_THERMAL_POWER_ALLOCATOR_H */ + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 7fac311057b8..021f823794e7 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -187,10 +187,12 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node, EXPORT_SYMBOL_GPL(irq_domain_add_legacy); /** - * irq_find_host() - Locates a domain for a given device node + * irq_find_matching_host() - Locates a domain for a given device node * @node: device-tree node of the interrupt controller + * @bus_token: domain-specific data */ -struct irq_domain *irq_find_host(struct device_node *node) +struct irq_domain *irq_find_matching_host(struct device_node *node, + enum irq_domain_bus_token bus_token) { struct irq_domain *h, *found = NULL; int rc; @@ -199,13 +201,19 @@ struct irq_domain *irq_find_host(struct device_node *node) * it might potentially be set to match all interrupts in * the absence of a device node. This isn't a problem so far * yet though... + * + * bus_token == DOMAIN_BUS_ANY matches any domain, any other + * values must generate an exact match for the domain to be + * selected. */ mutex_lock(&irq_domain_mutex); list_for_each_entry(h, &irq_domain_list, link) { if (h->ops->match) - rc = h->ops->match(h, node); + rc = h->ops->match(h, node, bus_token); else - rc = (h->of_node != NULL) && (h->of_node == node); + rc = ((h->of_node != NULL) && (h->of_node == node) && + ((bus_token == DOMAIN_BUS_ANY) || + (h->bus_token == bus_token))); if (rc) { found = h; @@ -215,7 +223,7 @@ struct irq_domain *irq_find_host(struct device_node *node) mutex_unlock(&irq_domain_mutex); return found; } -EXPORT_SYMBOL_GPL(irq_find_host); +EXPORT_SYMBOL_GPL(irq_find_matching_host); /** * irq_set_default_host() - Set a "default" irq domain diff --git a/linaro/configs/android.conf b/linaro/configs/android.conf new file mode 100644 index 000000000000..f1aefaebcc93 --- /dev/null +++ b/linaro/configs/android.conf @@ -0,0 +1,47 @@ +CONFIG_IPV6=y +# CONFIG_IPV6_SIT is not set +CONFIG_PANIC_TIMEOUT=0 +CONFIG_HAS_WAKELOCK=y +CONFIG_WAKELOCK=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_DM_CRYPT=y +CONFIG_POWER_SUPPLY=y +CONFIG_ANDROID_PARANOID_NETWORK=y +CONFIG_NET_ACTIVITY_STATS=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +CONFIG_INPUT_GPIO=y +CONFIG_USB_G_ANDROID=y +CONFIG_SWITCH=y +CONFIG_STAGING=y +CONFIG_ANDROID=y +CONFIG_ANDROID_BINDER_IPC=y +CONFIG_ASHMEM=y +CONFIG_ANDROID_LOGGER=y +CONFIG_ANDROID_TIMED_OUTPUT=y +CONFIG_ANDROID_TIMED_GPIO=y +CONFIG_ANDROID_LOW_MEMORY_KILLER=y +CONFIG_ANDROID_INTF_ALARM_DEV=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_FUSE_FS=y +CONFIG_CPU_FREQ_GOV_INTERACTIVE=y +CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y +CONFIG_SYNC=y +CONFIG_SW_SYNC=y +CONFIG_SW_SYNC_USER=y +CONFIG_ION=y +CONFIG_ION_TEST=y +CONFIG_ION_DUMMY=y +CONFIG_AUDIT=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_IP_NF_SECURITY=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_LSM_MMAP_MIN_ADDR=4096 +CONFIG_SECURITY_SELINUX=y +CONFIG_EXT4_FS_SECURITY=y diff --git a/linaro/configs/arndale.conf b/linaro/configs/arndale.conf new file mode 100644 index 000000000000..6d6f6de3024f --- /dev/null +++ b/linaro/configs/arndale.conf @@ -0,0 +1,98 @@ +CONFIG_KALLSYMS_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_ARCH_EXYNOS=y +CONFIG_S3C_LOWLEVEL_UART_PORT=2 +CONFIG_ARCH_EXYNOS5=y +CONFIG_VMSPLIT_2G=y +CONFIG_NR_CPUS=2 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_HIGHMEM=y +# CONFIG_COMPACTION is not set +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init= mem=256M" +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_PM_RUNTIME=y +CONFIG_CMA=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=128 +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_SATA_EXYNOS=y +CONFIG_AX88796=y +CONFIG_AX88796_93CX6=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_DM9601=y +CONFIG_USB_NET_MCS7830=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_S3C2410=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_EXYNOS_THERMAL=y +CONFIG_EXYNOS_THERMAL_CORE=y +CONFIG_MFD_SEC_CORE=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_S5M8767=y +CONFIG_DRM=y +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_EXYNOS=y +CONFIG_DRM_EXYNOS_DMABUF=y +CONFIG_DRM_EXYNOS_HDMI=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_SAMSUNG=y +CONFIG_SND_SOC_SMDK_I2S_STUB=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_EXTCON=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_HOST=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_STORAGE=y +CONFIG_USB_HSIC_USB3503=y +CONFIG_USB_GADGET=y +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_S3C=y +CONFIG_PHY_EXYNOS5250_SATA=y +CONFIG_PHY_SAMSUNG_USB2=y +CONFIG_PHY_EXYNOS4210_USB2=y +CONFIG_PHY_EXYNOS4X12_USB2=y +CONFIG_PHY_EXYNOS5250_USB2=y +CONFIG_EXYNOS_SIMPLE_PHY=y +CONFIG_PHY_EXYNOS5_USBDRD=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_INFO=y +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_DEBUG_USER=y +CONFIG_TUN=y diff --git a/linaro/configs/arndale_octa.conf b/linaro/configs/arndale_octa.conf new file mode 100644 index 000000000000..b8c42a665ff4 --- /dev/null +++ b/linaro/configs/arndale_octa.conf @@ -0,0 +1,86 @@ +CONFIG_KALLSYMS_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_EXYNOS=y +CONFIG_S3C_LOWLEVEL_UART_PORT=3 +CONFIG_ARCH_EXYNOS5=y +CONFIG_NR_CPUS=8 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_HIGHMEM=y +CONFIG_CMA=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC3,115200 init=/linuxrc mem=256M" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_PM_RUNTIME=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=128 +CONFIG_SCSI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_AX88796=y +CONFIG_AX88796_93CX6=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_DM9601=y +CONFIG_USB_NET_MCS7830=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_S3C2410=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_EXYNOS_THERMAL=y +CONFIG_EXYNOS_THERMAL_CORE=y +CONFIG_MFD_SEC_CORE=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_S2MPS11=y +CONFIG_DRM=y +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_EXYNOS=y +CONFIG_DRM_EXYNOS_DMABUF=y +CONFIG_DRM_EXYNOS_HDMI=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_SAMSUNG=y +CONFIG_SND_SOC_SMDK_I2S_STUB=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_HOST=y +CONFIG_USB_HSIC_USB3503=y +CONFIG_USB_GADGET=y +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_S3C=y +CONFIG_EXTCON=y +CONFIG_PHY_SAMSUNG_USB2=y +CONFIG_PHY_EXYNOS4210_USB2=y +CONFIG_PHY_EXYNOS4X12_USB2=y +CONFIG_PHY_EXYNOS5250_USB2=y +CONFIG_EXYNOS_SIMPLE_PHY=y +CONFIG_PHY_EXYNOS5_USBDRD=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_USER=y diff --git a/linaro/configs/audit.conf b/linaro/configs/audit.conf new file mode 100644 index 000000000000..19e21170b5db --- /dev/null +++ b/linaro/configs/audit.conf @@ -0,0 +1,9 @@ +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y +CONFIG_INTEGRITY_AUDIT=y +CONFIG_IMA=y +CONFIG_EVM=y +CONFIG_AUDIT_GENERIC=y diff --git a/linaro/configs/beaglebone.conf b/linaro/configs/beaglebone.conf new file mode 100644 index 000000000000..bb7eefb491a4 --- /dev/null +++ b/linaro/configs/beaglebone.conf @@ -0,0 +1,22 @@ +CONFIG_SOC_AM33XX=y +# CONFIG_THUMB2_KERNEL is not set +# CONFIG_ARM_APPENDED_DTB is not set +CONFIG_MFD_TPS65217=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_TI_CPSW=y +CONFIG_SMSC_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_OTG=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_DSPS=y +CONFIG_USB_MUSB_AM335X_CHILD=y +CONFIG_USB_TI_CPPI41_DMA=y +CONFIG_TI_CPPI41=y +CONFIG_AM335X_PHY_USB=y +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET_VBUS_DRAW=250 +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_MASS_STORAGE=m diff --git a/linaro/configs/big-LITTLE-IKS.conf b/linaro/configs/big-LITTLE-IKS.conf new file mode 100644 index 000000000000..eccb00f851e0 --- /dev/null +++ b/linaro/configs/big-LITTLE-IKS.conf @@ -0,0 +1,4 @@ +CONFIG_BIG_LITTLE=y +CONFIG_BL_SWITCHER=y +CONFIG_ARM_DT_BL_CPUFREQ=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y diff --git a/linaro/configs/bigendian.conf b/linaro/configs/bigendian.conf new file mode 100644 index 000000000000..6a1020299e85 --- /dev/null +++ b/linaro/configs/bigendian.conf @@ -0,0 +1,4 @@ +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_ENDIAN_BE8=y +# CONFIG_VIRTUALIZATION is not set +# CONFIG_MMC_DW_IDMAC is not set diff --git a/linaro/configs/capri.conf b/linaro/configs/capri.conf new file mode 100644 index 000000000000..9eb4bd3a079b --- /dev/null +++ b/linaro/configs/capri.conf @@ -0,0 +1,90 @@ +# CONFIG_SWAP is not set +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_SCHED=y +CONFIG_BLK_CGROUP=y +CONFIG_NAMESPACES=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_MOBILE=y +CONFIG_ARM_THUMBEE=y +CONFIG_PREEMPT=y +# CONFIG_COMPACTION is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M" +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX_DIAG=y +CONFIG_TCP_MD5SIG=y +# CONFIG_BLK_DEV is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_BCM_KONA_WDT=y +CONFIG_BCM_KONA_WDT_DEBUG=y +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_USB_GADGET=y +CONFIG_USB_S3C_HSOTG=y +CONFIG_USB_ETH=y +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_TEST=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_BCM_KONA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_PWM=y +CONFIG_GENERIC_PHY=y +CONFIG_BCM_KONA_USB2_PHY=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_FUSE_FS=y +CONFIG_DEBUG_INFO=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110 +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +# CONFIG_FTRACE is not set +CONFIG_XZ_DEC=y +CONFIG_AVERAGE=y diff --git a/linaro/configs/debug.conf b/linaro/configs/debug.conf new file mode 100644 index 000000000000..36980566b2d8 --- /dev/null +++ b/linaro/configs/debug.conf @@ -0,0 +1 @@ +CONFIG_PROVE_LOCKING=y diff --git a/linaro/configs/distribution.conf b/linaro/configs/distribution.conf new file mode 100644 index 000000000000..6329bd98cab4 --- /dev/null +++ b/linaro/configs/distribution.conf @@ -0,0 +1,65 @@ +CONFIG_FHANDLE=y +CONFIG_CGROUPS=y +CONFIG_NAMESPACES=y +# CONFIG_COMPAT_BRK is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 +CONFIG_SECCOMP=y +CONFIG_CC_STACKPROTECTOR_REGULAR=y +CONFIG_SYN_COOKIES=y +CONFIG_IPV6=m +CONFIG_NETLABEL=y +CONFIG_BRIDGE_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE=m +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +# CONFIG_DEVKMEM is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_AUTOFS4_FS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_STRICT_DEVMEM=y +CONFIG_SECURITY=y +CONFIG_LSM_MMAP_MIN_ADDR=0 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SMACK=y +CONFIG_SECURITY_APPARMOR=y +CONFIG_DEFAULT_SECURITY_APPARMOR=y +CONFIG_OF_SELFTEST=y diff --git a/linaro/configs/gcov.conf b/linaro/configs/gcov.conf new file mode 100644 index 000000000000..2d1209d1cf55 --- /dev/null +++ b/linaro/configs/gcov.conf @@ -0,0 +1,3 @@ +CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y +CONFIG_GCOV_FORMAT_AUTODETECT=y diff --git a/linaro/configs/hi3xxx.conf b/linaro/configs/hi3xxx.conf new file mode 100644 index 000000000000..0c46b02c842c --- /dev/null +++ b/linaro/configs/hi3xxx.conf @@ -0,0 +1,18 @@ +CONFIG_ARCH_HI3xxx=y +CONFIG_SMP=y +CONFIG_HOTPLUG_CPU=y +CONFIG_MFD_HI6421_PMIC=y +CONFIG_REGULATOR_HI6421=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_PLTFM=y +CONFIG_MMC_DW_K3=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_K3_DMA=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_MXT224E=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_HI6421_ONKEY=y +CONFIG_RTC_DRV_HI6421=y +# CONFIG_THUMB2_KERNEL is not set diff --git a/linaro/configs/highbank.conf b/linaro/configs/highbank.conf new file mode 100644 index 000000000000..33b978128777 --- /dev/null +++ b/linaro/configs/highbank.conf @@ -0,0 +1,42 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_HIGHBANK=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_SMP=y +CONFIG_SCHED_MC=y +CONFIG_AEABI=y +CONFIG_CMDLINE="console=ttyAMA0" +CONFIG_CPU_IDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_SATA_HIGHBANK=y +CONFIG_NETDEVICES=y +CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_IPMI_HANDLER=y +CONFIG_IPMI_SI=y +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIO_PL061=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_HIGHBANK_MC=y +CONFIG_EDAC_HIGHBANK_L2=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_PL330_DMA=y diff --git a/linaro/configs/hugepage.conf b/linaro/configs/hugepage.conf new file mode 100644 index 000000000000..85f56540acdd --- /dev/null +++ b/linaro/configs/hugepage.conf @@ -0,0 +1,3 @@ +CONFIG_HUGETLBFS=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y diff --git a/linaro/configs/ifc6410.conf b/linaro/configs/ifc6410.conf new file mode 100644 index 000000000000..10ccca0928aa --- /dev/null +++ b/linaro/configs/ifc6410.conf @@ -0,0 +1,327 @@ +CONFIG_FHANDLE=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_VIRT=y +CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_MOBILE=y +CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_HIGHBANK=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_HI3xxx=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_ARCH_MXC=y +CONFIG_MACH_IMX51_DT=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_VF610=y +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MSM8960=y +CONFIG_ARCH_MSM8974=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR13XX=y +CONFIG_MACH_SPEAR1310=y +CONFIG_MACH_SPEAR1340=y +CONFIG_ARCH_STI=y +CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_SIRF=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_TEGRA_2x_SOC=y +CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y +CONFIG_ARCH_TEGRA_124_SOC=y +CONFIG_ARCH_U8500=y +CONFIG_MACH_HREFV60=y +CONFIG_MACH_SNOWBALL=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_ARCH_WM8850=y +CONFIG_ARCH_ZYNQ=y +CONFIG_ARM_THUMBEE=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_TEGRA=y +CONFIG_NR_CPUS=8 +CONFIG_HIGHPTE=y +CONFIG_CMA=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_KEXEC=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_CAN=y +CONFIG_CAN_MCP251X=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +CONFIG_RFKILL_GPIO=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_OMAP_OCP2SCP=y +CONFIG_ICS932S401=y +CONFIG_APDS9802ALS=y +CONFIG_ISL29003=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_SUNXI_SID=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_QCOM=y +CONFIG_AHCI_SUNXI=y +CONFIG_SATA_HIGHBANK=y +CONFIG_SATA_MV=y +CONFIG_SUN4I_EMAC=y +CONFIG_ATL1C=y +CONFIG_MACB=y +CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_MVMDIO=y +CONFIG_KS8851=y +CONFIG_R8169=y +CONFIG_SMSC911X=y +CONFIG_STMMAC_ETH=y +CONFIG_TI_CPSW=y +CONFIG_AT803X_PHY=y +CONFIG_MARVELL_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_USB_PEGASUS=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC75XX=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_BRCMFMAC=m +CONFIG_RT2X00=m +CONFIG_RT2800USB=m +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_TEGRA=y +CONFIG_KEYBOARD_SPEAR=y +CONFIG_KEYBOARD_CROS_EC=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_MPU3050=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_SIRFSOC=y +CONFIG_SERIAL_SIRFSOC_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SERIAL_VT8500=y +CONFIG_SERIAL_VT8500_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_ST_ASC=y +CONFIG_SERIAL_ST_ASC_CONSOLE=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_MUX_PINCTRL=y +CONFIG_I2C_CADENCE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_MV64XXX=y +CONFIG_I2C_SIRF=y +CONFIG_I2C_TEGRA=y +CONFIG_SPI=y +CONFIG_SPI_OMAP24XX=y +CONFIG_SPI_PL022=y +CONFIG_SPI_SIRF=y +CONFIG_SPI_SUN4I=y +CONFIG_SPI_SUN6I=y +CONFIG_SPI_TEGRA114=y +CONFIG_SPI_TEGRA20_SFLASH=y +CONFIG_SPI_TEGRA20_SLINK=y +CONFIG_PINCTRL_AS3722=y +CONFIG_PINCTRL_APQ8064=y +CONFIG_PINCTRL_PALMAS=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_PALMAS=y +CONFIG_GPIO_TPS6586X=y +CONFIG_GPIO_TPS65910=y +CONFIG_BATTERY_SBS=y +CONFIG_CHARGER_TPS65090=y +CONFIG_POWER_RESET_AS3722=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_SUN6I=y +CONFIG_SENSORS_LM90=y +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=y +CONFIG_MFD_AS3722=y +CONFIG_MFD_BCM590XX=y +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_SPI=y +CONFIG_MFD_MAX8907=y +CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_PALMAS=y +CONFIG_MFD_TPS65090=y +CONFIG_MFD_TPS6586X=y +CONFIG_MFD_TPS65910=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_BCM590XX=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_QCOM_RPM=y +CONFIG_REGULATOR_S2MPS11=y +CONFIG_REGULATOR_S5M8767=y +CONFIG_REGULATOR_TPS51632=y +CONFIG_REGULATOR_TPS62360=y +CONFIG_REGULATOR_TPS65090=y +CONFIG_REGULATOR_TPS6586X=y +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_VEXPRESS=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=y +CONFIG_USB_GSPCA=y +CONFIG_DRM=y +# CONFIG_DRM_MSM_DSI is not set +CONFIG_DRM_TEGRA=y +CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_FB_ARMCLCD=y +CONFIG_FB_WM8505=y +CONFIG_FB_SIMPLE=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_TEGRA=y +CONFIG_SND_SOC_TEGRA_RT5640=y +CONFIG_SND_SOC_TEGRA_WM8753=y +CONFIG_SND_SOC_TEGRA_WM8903=y +CONFIG_SND_SOC_TEGRA_TRIMSLICE=y +CONFIG_SND_SOC_TEGRA_ALC5632=y +CONFIG_SND_SOC_TEGRA_MAX98090=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_AB8500_USB=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_ISP1301=y +CONFIG_USB_MSM_OTG=y +CONFIG_USB_MXS_PHY=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ARASAN=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_SDHCI_PXAV3=y +CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_SDHCI_S3C_DMA=y +CONFIG_MMC_SDHCI_BCM_KONA=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_SUNXI=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_HIGHBANK_MC=y +CONFIG_EDAC_HIGHBANK_L2=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_PALMAS=y +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_TPS6586X=y +CONFIG_RTC_DRV_TPS65910=y +CONFIG_RTC_DRV_EM3027=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_VT8500=y +CONFIG_RTC_DRV_SUNXI=y +CONFIG_RTC_DRV_TEGRA=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_TEGRA20_APB_DMA=y +CONFIG_STE_DMA40=y +CONFIG_SIRF_DMA=y +CONFIG_TI_EDMA=y +CONFIG_PL330_DMA=y +CONFIG_IMX_SDMA=y +CONFIG_IMX_DMA=y +CONFIG_MXS_DMA=y +CONFIG_DMA_OMAP=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_STAGING=y +CONFIG_SENSORS_ISL29018=y +CONFIG_SENSORS_ISL29028=y +CONFIG_MFD_NVEC=y +CONFIG_KEYBOARD_NVEC=y +CONFIG_SERIO_NVEC_PS2=y +CONFIG_NVEC_POWER=y +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_RPM=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_MSM_GCC_8660=y +CONFIG_MSM_MMCC_8960=y +CONFIG_MSM_MMCC_8974=y +CONFIG_TEGRA_IOMMU_GART=y +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_MEMORY=y +CONFIG_IIO=y +CONFIG_AK8975=y +CONFIG_PWM=y +CONFIG_PWM_TEGRA=y +CONFIG_PWM_VT8500=y +CONFIG_OMAP_USB2=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_QCOM_APQ8064_SATA=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_LOCKUP_DETECTOR=y diff --git a/linaro/configs/imx5.conf b/linaro/configs/imx5.conf new file mode 100644 index 000000000000..0196c572bb14 --- /dev/null +++ b/linaro/configs/imx5.conf @@ -0,0 +1,105 @@ +CONFIG_ARCH_MXC=y +CONFIG_MXC_PWM=y +CONFIG_SOC_IMX6Q=y +CONFIG_HIGHMEM=y +CONFIG_COMPACTION=y +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp" +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SMC91X=y +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_GPIO=y +# CONFIG_WLAN is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_MPR121=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIO_SERPORT=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCF=y +CONFIG_I2C_ALGOPCA=y +CONFIG_I2C_IMX=y +CONFIG_SPI=y +CONFIG_SPI_IMX=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_SUPPLY_DEBUG=y +CONFIG_TEST_POWER=y +CONFIG_MFD_MC13XXX=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_MC13892=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_VIDEO_DEV=y +CONFIG_USB_VIDEO_CLASS=y +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +CONFIG_FONTS=y +CONFIG_FONT_8x16=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_IMX_SOC=y +CONFIG_HIDRAW=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y +CONFIG_USB=y +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_NEW_LEDS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_DMADEVICES=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y diff --git a/linaro/configs/kvm-guest.conf b/linaro/configs/kvm-guest.conf new file mode 100644 index 000000000000..cf174f89d043 --- /dev/null +++ b/linaro/configs/kvm-guest.conf @@ -0,0 +1,17 @@ +CONFIG_9P_FS=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_NET_9P=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_VIRTIO_BLK=y +CONFIG_VIRTIO_NET=y +CONFIG_HVC_DRIVER=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_VIRTIO=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_VIRTUALIZATION=y +# CONFIG_THUMB2_KERNEL is not set diff --git a/linaro/configs/kvm-host.conf b/linaro/configs/kvm-host.conf new file mode 100644 index 000000000000..d0fb67b35175 --- /dev/null +++ b/linaro/configs/kvm-host.conf @@ -0,0 +1,13 @@ +CONFIG_VIRTUALIZATION=y +CONFIG_ARM_LPAE=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_MAX_VCPUS=4 +CONFIG_KVM_ARM_TIMER=y +CONFIG_KVM_ARM_VGIC=y +CONFIG_KVM_MMIO=y +CONFIG_KVM=y +CONFIG_BLK_DEV_NBD=m +CONFIG_BRIDGE=m +CONFIG_TUN=y diff --git a/linaro/configs/linaro-base-arm.conf b/linaro/configs/linaro-base-arm.conf new file mode 100644 index 000000000000..70f771bf2c47 --- /dev/null +++ b/linaro/configs/linaro-base-arm.conf @@ -0,0 +1,3 @@ +CONFIG_THUMB2_KERNEL=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set diff --git a/linaro/configs/linaro-base-arm64.conf b/linaro/configs/linaro-base-arm64.conf new file mode 100644 index 000000000000..4ce12fd20c03 --- /dev/null +++ b/linaro/configs/linaro-base-arm64.conf @@ -0,0 +1,3 @@ +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y +CONFIG_HUGETLBFS=y diff --git a/linaro/configs/linaro-base.conf b/linaro/configs/linaro-base.conf new file mode 100644 index 000000000000..1988c42cedea --- /dev/null +++ b/linaro/configs/linaro-base.conf @@ -0,0 +1,115 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y +CONFIG_SCHED_MC=y +CONFIG_SCHED_SMT=y +CONFIG_THUMB2_KERNEL=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_IDLE=y +CONFIG_BINFMT_MISC=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_INET_LRO is not set +CONFIG_NETFILTER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_OOPS=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_NAND=y +CONFIG_NETDEVICES=y +CONFIG_GPIO_SYSFS=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_BTRFS_FS=y +CONFIG_QUOTA=y +CONFIG_QFMT_V2=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_ECRYPT_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=y +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_INFO=y +CONFIG_KEYS=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_FUNCTION_TRACER=y +CONFIG_ENABLE_DEFAULT_TRACERS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_AUDIT=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_SELINUX=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JFS_SECURITY=y +CONFIG_XFS_SECURITY=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_NETLABEL=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y diff --git a/linaro/configs/linaro-base64.conf b/linaro/configs/linaro-base64.conf new file mode 120000 index 000000000000..a5af95de3e5a --- /dev/null +++ b/linaro/configs/linaro-base64.conf @@ -0,0 +1 @@ +linaro-base-arm64.conf
\ No newline at end of file diff --git a/linaro/configs/lt-arndale.conf b/linaro/configs/lt-arndale.conf new file mode 100644 index 000000000000..c54e0dcd0dcc --- /dev/null +++ b/linaro/configs/lt-arndale.conf @@ -0,0 +1 @@ +CONFIG_EXTRA_FIRMWARE="edid-1920x1080.fw" diff --git a/linaro/configs/lt-arndale_octa.conf b/linaro/configs/lt-arndale_octa.conf new file mode 100644 index 000000000000..c54e0dcd0dcc --- /dev/null +++ b/linaro/configs/lt-arndale_octa.conf @@ -0,0 +1 @@ +CONFIG_EXTRA_FIRMWARE="edid-1920x1080.fw" diff --git a/linaro/configs/multi_v7.conf b/linaro/configs/multi_v7.conf new file mode 100644 index 000000000000..682be962a196 --- /dev/null +++ b/linaro/configs/multi_v7.conf @@ -0,0 +1,151 @@ +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_ARCH_MVEBU=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_XP=y +CONFIG_ARCH_BCM=y +CONFIG_GPIO_PCA953X=y +CONFIG_ARCH_HIGHBANK=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_ARCH_MXC=y +CONFIG_MACH_IMX51_DT=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_VF610=y +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SOCFPGA=y +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR13XX=y +CONFIG_MACH_SPEAR1310=y +CONFIG_MACH_SPEAR1340=y +CONFIG_ARCH_STI=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_SIRF=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_TEGRA_2x_SOC=y +CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y +CONFIG_TEGRA_EMC_SCALING_ENABLE=y +CONFIG_ARCH_U8500=y +CONFIG_MACH_HREFV60=y +CONFIG_MACH_SNOWBALL=y +CONFIG_MACH_UX500_DT=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_ARCH_VIRT=y +CONFIG_ARCH_WM8850=y +CONFIG_ARCH_ZYNQ=y +CONFIG_HIGHPTE=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_OMAP_OCP2SCP=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_SATA_HIGHBANK=y +CONFIG_SATA_MV=y +CONFIG_SUN4I_EMAC=y +CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_KS8851=y +CONFIG_SMSC911X=y +CONFIG_STMMAC_ETH=y +CONFIG_KEYBOARD_SPEAR=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_SIRFSOC=y +CONFIG_SERIAL_SIRFSOC_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_VT8500=y +CONFIG_SERIAL_VT8500_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_SIRF=y +CONFIG_I2C_TEGRA=y +CONFIG_SPI=y +CONFIG_SPI_OMAP24XX=y +CONFIG_SPI_PL022=y +CONFIG_SPI_SIRF=y +CONFIG_SPI_TEGRA114=y +CONFIG_SPI_TEGRA20_SLINK=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_TWL4030=y +CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_TPS51632=y +CONFIG_REGULATOR_TPS62360=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_VEXPRESS=y +CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y +CONFIG_DRM_TEGRA=y +CONFIG_FB_ARMCLCD=y +CONFIG_FB_WM8505=y +CONFIG_FB_SIMPLE=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_AB8500_USB=y +CONFIG_OMAP_USB2=y +CONFIG_OMAP_USB3=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_ISP1301=y +CONFIG_USB_MXS_PHY=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_HIGHBANK_MC=y +CONFIG_EDAC_HIGHBANK_L2=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_VT8500=y +CONFIG_RTC_DRV_TEGRA=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_TEGRA20_APB_DMA=y +CONFIG_STE_DMA40=y +CONFIG_SIRF_DMA=y +CONFIG_TI_EDMA=y +CONFIG_PL330_DMA=y +CONFIG_IMX_SDMA=y +CONFIG_IMX_DMA=y +CONFIG_MXS_DMA=y +CONFIG_DMA_OMAP=y +CONFIG_PWM=y +CONFIG_PWM_VT8500=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y diff --git a/linaro/configs/netns.conf b/linaro/configs/netns.conf new file mode 100644 index 000000000000..7fadd7d67e36 --- /dev/null +++ b/linaro/configs/netns.conf @@ -0,0 +1,2 @@ +CONFIG_NAMESPACES=y +CONFIG_VETH=y diff --git a/linaro/configs/null.conf b/linaro/configs/null.conf new file mode 100644 index 000000000000..1f71535af70b --- /dev/null +++ b/linaro/configs/null.conf @@ -0,0 +1 @@ +### null config just for testing multiple config frags diff --git a/linaro/configs/omap2plus.conf b/linaro/configs/omap2plus.conf new file mode 100644 index 000000000000..669c5abf6454 --- /dev/null +++ b/linaro/configs/omap2plus.conf @@ -0,0 +1,205 @@ +CONFIG_EXPERT=y +CONFIG_KPROBES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_MULTI_V6=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_ARCH_OMAP2=y +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_DRA7XX=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_411920=y +CONFIG_NR_CPUS=2 +CONFIG_CMA=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_PM_DEBUG=y +CONFIG_IPV6=y +CONFIG_CAN=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_BT=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_OMAP2=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_SENSORS_TSL2550=m +CONFIG_BMP085_I2C=m +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_KS8851=y +CONFIG_KS8851_MLL=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_TI_CPSW=y +CONFIG_AT803X_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_TWL4030=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_OMAP24XX=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_TWL4030=y +CONFIG_W1=y +CONFIG_POWER_SUPPLY=y +CONFIG_SENSORS_LM75=m +CONFIG_THERMAL=y +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_USER_SPACE=y +CONFIG_TI_SOC_THERMAL=y +CONFIG_OMAP4_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_OMAP2_DSS=m +CONFIG_OMAP2_DSS_SDI=y +CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP2=m +CONFIG_DISPLAY_ENCODER_TFP410=m +CONFIG_DISPLAY_ENCODER_TPD12S015=m +CONFIG_DISPLAY_CONNECTOR_DVI=m +CONFIG_DISPLAY_CONNECTOR_HDMI=m +CONFIG_DISPLAY_PANEL_DPI=m +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_LOGO=y +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_WDM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_TEST=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_ZERO=m +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_SDIO_UART=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_TWL92330=y +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_OMAP=y +CONFIG_DMADEVICES=y +CONFIG_TI_EDMA=y +CONFIG_DMA_OMAP=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_UBIFS_FS=y +CONFIG_DEBUG_INFO=y +CONFIG_PROVE_LOCKING=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_SECURITY=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_LIBCRC32C=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y diff --git a/linaro/configs/omap4.conf b/linaro/configs/omap4.conf new file mode 100644 index 000000000000..50fb9d9cb5b5 --- /dev/null +++ b/linaro/configs/omap4.conf @@ -0,0 +1,194 @@ +CONFIG_EXPERT=y +CONFIG_KPROBES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_GPIO_PCA953X=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_ARCH_OMAP2PLUS=y +CONFIG_SOC_OMAP5=y +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_411920=y +CONFIG_NR_CPUS=2 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" +CONFIG_KEXEC=y +CONFIG_PM_DEBUG=y +CONFIG_CAN=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_BT=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_CMA=y +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_OMAP2=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_KS8851=y +CONFIG_KS8851_MLL=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_TI_CPSW=y +CONFIG_SMSC_PHY=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_TWL4030=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_OMAP24XX=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_TWL4030=y +CONFIG_W1=y +CONFIG_SENSORS_LM75=m +CONFIG_WATCHDOG=y +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_OMAP2_DSS=m +CONFIG_OMAP2_DSS_RFBI=y +CONFIG_OMAP2_DSS_SDI=y +CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP2=m +CONFIG_PANEL_GENERIC_DPI=m +CONFIG_PANEL_TFP410=m +CONFIG_PANEL_SHARP_LS037V7DW01=m +CONFIG_PANEL_NEC_NL8048HL11_01B=m +CONFIG_PANEL_TAAL=m +CONFIG_PANEL_TPO_TD043MTEA1=m +CONFIG_PANEL_ACX565AKM=m +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_WDM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_TEST=y +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_ZERO=m +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_SDIO_UART=y +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_TWL92330=y +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_OMAP=y +CONFIG_DMADEVICES=y +CONFIG_DMA_OMAP=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_UBIFS_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_LIBCRC32C=y +# CONFIG_CPU_FREQ is not set diff --git a/linaro/configs/origen.conf b/linaro/configs/origen.conf new file mode 100644 index 000000000000..9546585f7266 --- /dev/null +++ b/linaro/configs/origen.conf @@ -0,0 +1,89 @@ +CONFIG_ARCH_EXYNOS=y +CONFIG_S3C_LOWLEVEL_UART_PORT=2 +CONFIG_S3C24XX_PWM=y +CONFIG_MACH_SMDKC210=y +CONFIG_MACH_ARMLEX4210=y +CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_MACH_NURI=y +CONFIG_MACH_ORIGEN=y +CONFIG_MACH_SMDK4412=y +CONFIG_MACH_EXYNOS4_DT=y +CONFIG_NR_CPUS=2 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_CMDLINE="root=/dev/mmcblk0p1 rw rootwait console=ttySAC2,115200" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_IDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_PM_RUNTIME=y +CONFIG_RFKILL=y +CONFIG_RFKILL_GPIO=y +CONFIG_CMA=y +CONFIG_CMA_SIZE_MBYTES=32 +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_CFG80211=y +CONFIG_USB_PEGASUS=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_DM9601=y +CONFIG_USB_NET_MCS7830=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_S3C2410=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_SENSORS_EXYNOS4_TMU=y +CONFIG_POWER_SUPPLY=y +CONFIG_MFD_MAX8997=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_MAX8997=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_FIMC=y +CONFIG_VIDEO_S5P_FIMC=y +CONFIG_VIDEO_SAMSUNG_S5P_TV=y +CONFIG_VIDEO_SAMSUNG_S5P_HDMI=y +CONFIG_VIDEO_SAMSUNG_S5P_SDO=y +CONFIG_VIDEO_SAMSUNG_S5P_MIXER=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_G2D=y +CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y +CONFIG_VIDEO_SAMSUNG_S5P_MFC=y +CONFIG_FB=y +CONFIG_FB_S3C=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_LOGO=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_S5P=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_SDHCI_S3C_DMA=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_S3C=y +CONFIG_DEBUG_S3C_UART2=y diff --git a/linaro/configs/panda.conf b/linaro/configs/panda.conf new file mode 100644 index 000000000000..1771853ceeae --- /dev/null +++ b/linaro/configs/panda.conf @@ -0,0 +1,11 @@ +# CONFIG_ARCH_OMAP2 is not set +CONFIG_GPIO_PCA953X=y +CONFIG_REGULATOR_DUMMY=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_LEDS_CLASS=y +CONFIG_WL_TI=y +CONFIG_WL12XX=m +CONFIG_WLCORE=m +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y diff --git a/linaro/configs/preempt-rt.conf b/linaro/configs/preempt-rt.conf new file mode 100644 index 000000000000..7c6594f3a016 --- /dev/null +++ b/linaro/configs/preempt-rt.conf @@ -0,0 +1,3 @@ +CONFIG_PREEMPT=y +CONFIG_PREEMPT_RT_FULL=y +# CONFIG_CPU_FREQ is not set diff --git a/linaro/configs/u8500.conf b/linaro/configs/u8500.conf new file mode 100644 index 000000000000..86e294faa2f6 --- /dev/null +++ b/linaro/configs/u8500.conf @@ -0,0 +1,83 @@ +# CONFIG_SWAP is not set +CONFIG_KALLSYMS_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_U8500=y +CONFIG_MACH_HREFV60=y +CONFIG_MACH_SNOWBALL=y +CONFIG_MACH_UX500_DT=y +CONFIG_NR_CPUS=2 +CONFIG_PREEMPT=y +CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_PM_RUNTIME=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_IPV6_SIT=m +CONFIG_PHONET=y +# CONFIG_WIRELESS is not set +CONFIG_CAIF=y +CONFIG_SENSORS_BH1780=y +CONFIG_SMSC911X=y +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_NOMADIK=y +CONFIG_KEYBOARD_STMPE=y +CONFIG_KEYBOARD_TC3589X=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_BU21013=y +CONFIG_INPUT_AB8500_PONKEY=y +# CONFIG_SERIO is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIO_STMPE=y +CONFIG_GPIO_TC3589X=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_MFD_STMPE=y +CONFIG_MFD_TC3589X=y +CONFIG_AB8500_CORE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_AB8500=y +CONFIG_USB_GADGET=y +CONFIG_AB8500_USB=y +CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y +CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3530=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP5521=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AB8500=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_STE_DMA40=y +CONFIG_STAGING=y +CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y +CONFIG_HSEM_U8500=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y diff --git a/linaro/configs/uprobes.conf b/linaro/configs/uprobes.conf new file mode 100644 index 000000000000..a9617986284a --- /dev/null +++ b/linaro/configs/uprobes.conf @@ -0,0 +1,7 @@ +CONFIG_NAMESPACES=y +CONFIG_USER_NS=y +CONFIG_RELAY=y +CONFIG_KPROBES=y +CONFIG_UPROBE_EVENT=y +CONFIG_KPROBES_SANITY_TEST=y +CONFIG_ARM_KPROBES_TEST=m diff --git a/linaro/configs/vexpress.conf b/linaro/configs/vexpress.conf new file mode 100644 index 000000000000..8370cf15be65 --- /dev/null +++ b/linaro/configs/vexpress.conf @@ -0,0 +1,64 @@ +CONFIG_ARCH_VEXPRESS=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_NR_CPUS=8 +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_ARM_PSCI=y +CONFIG_MCPM=y +CONFIG_ARCH_VEXPRESS_DCSCB=y +CONFIG_ARCH_VEXPRESS_TC2_PM=y +CONFIG_ARM_BIG_LITTLE_CPUIDLE=y +CONFIG_BIG_LITTLE=y +CONFIG_ARM_BIG_LITTLE_CPUFREQ=y +CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y +CONFIG_PM_OPP=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +CONFIG_CMDLINE="console=ttyAMA0,38400n8 root=/dev/mmcblk0p2 rootwait mmci.fmax=4000000" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SMSC911X=y +CONFIG_SMC91X=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FB_ARMHDLCD=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_ARMAACI=y +CONFIG_USB=y +CONFIG_USB_ISP1760=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_VEXPRESS_CONFIG=y +CONFIG_SENSORS_VEXPRESS=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_VEXPRESS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_VIRTIO=y +CONFIG_VIRTIO_BLK=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y diff --git a/linaro/configs/vexpress64.conf b/linaro/configs/vexpress64.conf new file mode 100644 index 000000000000..f88ca4ac062c --- /dev/null +++ b/linaro/configs/vexpress64.conf @@ -0,0 +1,63 @@ +CONFIG_ARCH_VEXPRESS=y +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT=y +CONFIG_CMDLINE="console=ttyAMA0" +CONFIG_COMPAT=y +CONFIG_SMC91X=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIO_I8042 is not set +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_VIRTIO=y +CONFIG_VIRTIO_BLK=y +CONFIG_VIRTIO_MMIO=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_SMSC911X=y +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_USB_HIDDEV=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_USB_STORAGE=y +CONFIG_USB=y +CONFIG_USB_ULPI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_OHCI_HCD=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_REALLOC_ENABLE_AUTO=y +CONFIG_PCI_PRI=y +CONFIG_PCI_PASID=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCIEPORTBUS=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_PCIE=y +CONFIG_PCIEAER=y +CONFIG_PCIE_ECRC=y +CONFIG_CONNECTOR=y +CONFIG_ATA=y +CONFIG_SATA_SIL24=y +CONFIG_SKY2=y diff --git a/linaro/configs/xen.conf b/linaro/configs/xen.conf new file mode 100644 index 000000000000..d24fabbea076 --- /dev/null +++ b/linaro/configs/xen.conf @@ -0,0 +1,7 @@ +CONFIG_XEN=y +CONFIG_XEN_NETDEV_FRONTEND=y +CONFIG_XEN_NETDEV_BACKEND=y +CONFIG_XEN_BLKDEV_FRONTEND=y +CONFIG_XEN_BLKDEV_BACKEND=y +CONFIG_XENFS=y +CONFIG_XEN_COMPAT_XENFS=y |