aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.gitignore3
-rw-r--r--Documentation/00-INDEX24
-rw-r--r--Documentation/PCI/MSI-HOWTO.txt119
-rw-r--r--Documentation/RCU/00-INDEX2
-rw-r--r--Documentation/arm/00-INDEX14
-rw-r--r--Documentation/blackfin/00-INDEX6
-rw-r--r--Documentation/block/00-INDEX2
-rw-r--r--Documentation/device-mapper/cache.txt11
-rw-r--r--Documentation/device-mapper/thin-provisioning.txt34
-rw-r--r--Documentation/devicetree/00-INDEX2
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt4
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt16
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt18
-rw-r--r--Documentation/devicetree/bindings/mmc/atmel-hsmci.txt5
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt5
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt5
-rw-r--r--Documentation/devicetree/bindings/net/opencores-ethoc.txt22
-rw-r--r--Documentation/devicetree/bindings/net/sti-dwmac.txt58
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt (renamed from Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt)8
-rw-r--r--Documentation/devicetree/bindings/power/bq2415x.txt47
-rw-r--r--Documentation/devicetree/bindings/spi/spi_atmel.txt5
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt6
-rw-r--r--Documentation/dvb/contributors.txt2
-rw-r--r--Documentation/fb/00-INDEX6
-rw-r--r--Documentation/filesystems/00-INDEX2
-rw-r--r--Documentation/filesystems/nfs/00-INDEX4
-rw-r--r--Documentation/i2c/instantiating-devices41
-rw-r--r--Documentation/ide/00-INDEX2
-rw-r--r--Documentation/kernel-parameters.txt8
-rw-r--r--Documentation/laptops/00-INDEX6
-rw-r--r--Documentation/leds/00-INDEX8
-rw-r--r--Documentation/m68k/00-INDEX2
-rw-r--r--Documentation/networking/00-INDEX30
-rw-r--r--Documentation/networking/3c505.txt45
-rw-r--r--Documentation/networking/can.txt6
-rw-r--r--Documentation/phy.txt26
-rw-r--r--Documentation/power/00-INDEX6
-rw-r--r--Documentation/ptp/testptp.c11
-rw-r--r--Documentation/s390/00-INDEX8
-rw-r--r--Documentation/scheduler/00-INDEX2
-rw-r--r--Documentation/scsi/00-INDEX16
-rw-r--r--Documentation/serial/00-INDEX6
-rw-r--r--Documentation/spi/00-INDEX22
-rw-r--r--Documentation/spi/spi-summary17
-rw-r--r--Documentation/timers/00-INDEX2
-rw-r--r--Documentation/virtual/kvm/00-INDEX2
-rw-r--r--Documentation/vm/00-INDEX4
-rw-r--r--Documentation/w1/masters/00-INDEX4
-rw-r--r--Documentation/w1/slaves/00-INDEX2
-rw-r--r--Documentation/x86/00-INDEX18
-rw-r--r--Documentation/zh_CN/arm64/booting.txt65
-rw-r--r--Documentation/zh_CN/arm64/memory.txt46
-rw-r--r--Documentation/zh_CN/arm64/tagged-pointers.txt52
-rw-r--r--MAINTAINERS158
-rw-r--r--Makefile10
-rw-r--r--arch/arc/mm/cache_arc700.c4
-rw-r--r--arch/arm/Kconfig3
-rw-r--r--arch/arm/boot/compressed/.gitignore1
-rw-r--r--arch/arm/boot/dts/Makefile4
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts11
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78260.dtsi3
-rw-r--r--arch/arm/boot/dts/at91-sama5d3_xplained.dts229
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi2
-rw-r--r--arch/arm/boot/dts/at91sam9n12ek.dts4
-rw-r--r--arch/arm/boot/dts/bcm11351.dtsi2
-rw-r--r--arch/arm/boot/dts/dove.dtsi11
-rw-r--r--arch/arm/boot/dts/imx6dl-hummingboard.dts10
-rw-r--r--arch/arm/boot/dts/imx6qdl-cubox-i.dtsi10
-rw-r--r--arch/arm/boot/dts/keystone-clocks.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dts8
-rw-r--r--arch/arm/boot/dts/omap3-igep0020.dts2
-rw-r--r--arch/arm/boot/dts/omap3-igep0030.dts2
-rw-r--r--arch/arm/boot/dts/omap3-n9.dts2
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts4
-rw-r--r--arch/arm/boot/dts/omap3-n950.dts2
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-tobi.dts22
-rw-r--r--arch/arm/boot/dts/omap3-overo-tobi-common.dtsi (renamed from arch/arm/boot/dts/omap3-tobi.dts)3
-rw-r--r--arch/arm/boot/dts/omap3-overo-tobi.dts22
-rw-r--r--arch/arm/boot/dts/omap3-overo.dtsi3
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi1
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi6
-rw-r--r--arch/arm/boot/dts/sun5i-a10s.dtsi6
-rw-r--r--arch/arm/boot/dts/sun5i-a13.dtsi2
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi16
-rw-r--r--arch/arm/boot/dts/tegra114.dtsi4
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi4
-rw-r--r--arch/arm/boot/dts/tegra30-cardhu.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi4
-rw-r--r--arch/arm/boot/dts/testcases/tests.dtsi2
-rw-r--r--arch/arm/boot/dts/versatile-pb.dts4
-rw-r--r--arch/arm/configs/multi_v7_defconfig1
-rw-r--r--arch/arm/configs/tegra_defconfig3
-rw-r--r--arch/arm/include/asm/cacheflush.h1
-rw-r--r--arch/arm/include/asm/memory.h9
-rw-r--r--arch/arm/include/asm/pgtable-3level.h15
-rw-r--r--arch/arm/include/asm/spinlock.h15
-rw-r--r--arch/arm/kernel/head-common.S12
-rw-r--r--arch/arm/kernel/head.S2
-rw-r--r--arch/arm/kernel/setup.c2
-rw-r--r--arch/arm/kvm/arm.c3
-rw-r--r--arch/arm/kvm/interrupts.S11
-rw-r--r--arch/arm/mach-hisi/Kconfig2
-rw-r--r--arch/arm/mach-imx/Makefile2
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c3
-rw-r--r--arch/arm/mach-imx/clk-imx6sl.c3
-rw-r--r--arch/arm/mach-imx/common.h4
-rw-r--r--arch/arm/mach-imx/pm-imx6q.c2
-rw-r--r--arch/arm/mach-moxart/Kconfig1
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c1
-rw-r--r--arch/arm/mach-omap2/Kconfig10
-rw-r--r--arch/arm/mach-omap2/cclock3xxx_data.c2
-rw-r--r--arch/arm/mach-omap2/cpuidle44xx.c8
-rw-r--r--arch/arm/mach-omap2/dpll3xxx.c92
-rw-r--r--arch/arm/mach-omap2/gpmc.c4
-rw-r--r--arch/arm/mach-omap2/io.c9
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c20
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c9
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c21
-rw-r--r--arch/arm/mach-omap2/prminst44xx.c4
-rw-r--r--arch/arm/mach-pxa/am300epd.c1
-rw-r--r--arch/arm/mach-pxa/include/mach/balloon3.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/corgi.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/csb726.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/gumstix.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/idp.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/palmld.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmt5.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmtc.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmtx.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/pcm027.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/pcm990_baseboard.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/poodle.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/spitz.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/tosa.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/trizeps4.h2
-rw-r--r--arch/arm/mach-pxa/mioa701.c9
-rw-r--r--arch/arm/mach-sa1100/include/mach/collie.h2
-rw-r--r--arch/arm/mach-shmobile/Kconfig2
-rw-r--r--arch/arm/mach-tegra/pm.c1
-rw-r--r--arch/arm/mach-tegra/tegra.c10
-rw-r--r--arch/arm/mach-zynq/common.c14
-rw-r--r--arch/arm/mm/dma-mapping.c2
-rw-r--r--arch/arm/mm/dump.c3
-rw-r--r--arch/arm/mm/mm.h1
-rw-r--r--arch/arm/mm/mmu.c7
-rw-r--r--arch/arm/mm/proc-v6.S3
-rw-r--r--arch/arm/mm/proc-v7.S2
-rw-r--r--arch/arm64/Kconfig1
-rw-r--r--arch/arm64/configs/defconfig18
-rw-r--r--arch/arm64/include/asm/atomic.h53
-rw-r--r--arch/arm64/include/asm/barrier.h2
-rw-r--r--arch/arm64/include/asm/cacheflush.h1
-rw-r--r--arch/arm64/include/asm/cmpxchg.h17
-rw-r--r--arch/arm64/include/asm/esr.h2
-rw-r--r--arch/arm64/include/asm/futex.h10
-rw-r--r--arch/arm64/include/asm/kvm_arm.h2
-rw-r--r--arch/arm64/include/asm/percpu.h8
-rw-r--r--arch/arm64/include/asm/pgtable.h10
-rw-r--r--arch/arm64/include/asm/spinlock.h10
-rw-r--r--arch/arm64/include/asm/unistd32.h5
-rw-r--r--arch/arm64/include/uapi/asm/kvm.h9
-rw-r--r--arch/arm64/kernel/kuser32.S6
-rw-r--r--arch/arm64/kernel/stacktrace.c6
-rw-r--r--arch/arm64/kernel/vdso.c4
-rw-r--r--arch/arm64/kernel/vdso/Makefile2
-rw-r--r--arch/arm64/kernel/vdso/gettimeofday.S7
-rw-r--r--arch/arm64/kvm/hyp.S27
-rw-r--r--arch/arm64/lib/bitops.S3
-rw-r--r--arch/arm64/mm/dma-mapping.c1
-rw-r--r--arch/arm64/mm/mmu.c12
-rw-r--r--arch/arm64/mm/pgd.c11
-rw-r--r--arch/avr32/Makefile2
-rw-r--r--arch/avr32/boards/mimc200/fram.c1
-rw-r--r--arch/avr32/include/asm/Kbuild1
-rw-r--r--arch/avr32/include/asm/io.h2
-rw-r--r--arch/c6x/include/asm/cache.h1
-rw-r--r--arch/ia64/include/asm/unistd.h2
-rw-r--r--arch/ia64/include/uapi/asm/unistd.h2
-rw-r--r--arch/ia64/kernel/entry.S2
-rw-r--r--arch/m68k/include/asm/Kbuild6
-rw-r--r--arch/m68k/include/asm/barrier.h8
-rw-r--r--arch/m68k/include/asm/unistd.h2
-rw-r--r--arch/m68k/include/uapi/asm/unistd.h2
-rw-r--r--arch/m68k/kernel/syscalltable.S2
-rw-r--r--arch/microblaze/include/asm/delay.h2
-rw-r--r--arch/microblaze/include/asm/io.h6
-rw-r--r--arch/microblaze/kernel/head.S2
-rw-r--r--arch/mips/alchemy/devboards/db1000.c7
-rw-r--r--arch/mips/include/asm/fpu.h2
-rw-r--r--arch/mips/include/uapi/asm/unistd.h18
-rw-r--r--arch/mips/kernel/scall32-o32.S2
-rw-r--r--arch/mips/kernel/scall64-64.S2
-rw-r--r--arch/mips/kernel/scall64-n32.S2
-rw-r--r--arch/mips/kernel/scall64-o32.S2
-rw-r--r--arch/parisc/hpux/fs.c15
-rw-r--r--arch/powerpc/include/asm/compat.h5
-rw-r--r--arch/powerpc/include/asm/dma-mapping.h1
-rw-r--r--arch/powerpc/include/asm/eeh.h21
-rw-r--r--arch/powerpc/include/asm/hugetlb.h2
-rw-r--r--arch/powerpc/include/asm/iommu.h1
-rw-r--r--arch/powerpc/include/asm/opal.h4
-rw-r--r--arch/powerpc/include/asm/pgtable-ppc64.h26
-rw-r--r--arch/powerpc/include/asm/pgtable.h22
-rw-r--r--arch/powerpc/include/asm/ptrace.h16
-rw-r--r--arch/powerpc/include/asm/sections.h12
-rw-r--r--arch/powerpc/include/asm/vdso.h6
-rw-r--r--arch/powerpc/kernel/crash_dump.c8
-rw-r--r--arch/powerpc/kernel/dma.c10
-rw-r--r--arch/powerpc/kernel/eeh.c32
-rw-r--r--arch/powerpc/kernel/eeh_driver.c8
-rw-r--r--arch/powerpc/kernel/ftrace.c1
-rw-r--r--arch/powerpc/kernel/iommu.c12
-rw-r--r--arch/powerpc/kernel/irq.c5
-rw-r--r--arch/powerpc/kernel/machine_kexec.c14
-rw-r--r--arch/powerpc/kernel/machine_kexec_64.c6
-rw-r--r--arch/powerpc/kernel/misc_32.S5
-rw-r--r--arch/powerpc/kernel/process.c9
-rw-r--r--arch/powerpc/kernel/reloc_64.S5
-rw-r--r--arch/powerpc/kernel/setup_32.c5
-rw-r--r--arch/powerpc/kernel/signal_64.c4
-rw-r--r--arch/powerpc/kernel/vdso32/vdso32_wrapper.S2
-rw-r--r--arch/powerpc/kernel/vdso64/vdso64_wrapper.S2
-rw-r--r--arch/powerpc/mm/hash_utils_64.c14
-rw-r--r--arch/powerpc/mm/pgtable_64.c12
-rw-r--r--arch/powerpc/mm/subpage-prot.c2
-rw-r--r--arch/powerpc/perf/core-book3s.c5
-rw-r--r--arch/powerpc/perf/power8-pmu.c144
-rw-r--r--arch/powerpc/platforms/powernv/eeh-ioda.c128
-rw-r--r--arch/powerpc/platforms/powernv/eeh-powernv.c2
-rw-r--r--arch/powerpc/platforms/powernv/opal-xscom.c21
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c84
-rw-r--r--arch/powerpc/platforms/powernv/pci.c230
-rw-r--r--arch/powerpc/platforms/powernv/pci.h6
-rw-r--r--arch/powerpc/platforms/powernv/powernv.h8
-rw-r--r--arch/powerpc/platforms/powernv/setup.c9
-rw-r--r--arch/powerpc/platforms/pseries/Kconfig1
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pseries.c2
-rw-r--r--arch/powerpc/platforms/pseries/hotplug-cpu.c22
-rw-r--r--arch/powerpc/platforms/pseries/pci.c22
-rw-r--r--arch/powerpc/platforms/pseries/setup.c3
-rw-r--r--arch/powerpc/sysdev/mpic.c38
-rw-r--r--arch/powerpc/xmon/xmon.c24
-rw-r--r--arch/s390/appldata/appldata_base.c1
-rw-r--r--arch/s390/crypto/aes_s390.c65
-rw-r--r--arch/s390/crypto/des_s390.c95
-rw-r--r--arch/s390/kernel/compat_wrapper.S2
-rw-r--r--arch/s390/kernel/head64.S7
-rw-r--r--arch/s390/mm/page-states.c10
-rw-r--r--arch/s390/pci/pci_dma.c8
-rw-r--r--arch/sh/include/cpu-sh2/cpu/cache.h2
-rw-r--r--arch/sh/include/cpu-sh2a/cpu/cache.h4
-rw-r--r--arch/sh/include/cpu-sh3/cpu/cache.h2
-rw-r--r--arch/sh/include/cpu-sh4/cpu/cache.h2
-rw-r--r--arch/sh/kernel/cpu/init.c4
-rw-r--r--arch/sh/mm/cache-debugfs.c2
-rw-r--r--arch/sh/mm/cache-sh2.c4
-rw-r--r--arch/sh/mm/cache-sh2a.c6
-rw-r--r--arch/sh/mm/cache-sh4.c4
-rw-r--r--arch/sh/mm/cache-shx3.c4
-rw-r--r--arch/sh/mm/cache.c4
-rw-r--r--arch/sparc/Kconfig2
-rw-r--r--arch/sparc/mm/srmmu.c2
-rw-r--r--arch/x86/Kconfig7
-rw-r--r--arch/x86/Kconfig.debug1
-rw-r--r--arch/x86/boot/compressed/aslr.c9
-rw-r--r--arch/x86/include/asm/amd_nb.h2
-rw-r--r--arch/x86/include/asm/efi.h3
-rw-r--r--arch/x86/include/asm/pgtable.h14
-rw-r--r--arch/x86/include/asm/tlbflush.h6
-rw-r--r--arch/x86/include/asm/tsc.h2
-rw-r--r--arch/x86/include/asm/xen/page.h5
-rw-r--r--arch/x86/kernel/amd_nb.c2
-rw-r--r--arch/x86/kernel/cpu/amd.c5
-rw-r--r--arch/x86/kernel/cpu/common.c7
-rw-r--r--arch/x86/kernel/cpu/intel.c10
-rw-r--r--arch/x86/kernel/cpu/microcode/amd_early.c43
-rw-r--r--arch/x86/kernel/cpu/mtrr/generic.c4
-rw-r--r--arch/x86/kernel/cpu/perf_event.c11
-rw-r--r--arch/x86/kernel/cpu/perf_event.h1
-rw-r--r--arch/x86/kernel/cpu/perf_event_intel.c11
-rw-r--r--arch/x86/kernel/cpu/perf_event_intel_uncore.c10
-rw-r--r--arch/x86/kernel/cpu/perf_event_p6.c48
-rw-r--r--arch/x86/kernel/ftrace.c83
-rw-r--r--arch/x86/kernel/head_32.S7
-rw-r--r--arch/x86/kernel/head_64.S6
-rw-r--r--arch/x86/kernel/irq.c9
-rw-r--r--arch/x86/kernel/machine_kexec_64.c2
-rw-r--r--arch/x86/kernel/pci-dma.c4
-rw-r--r--arch/x86/kernel/quirks.c37
-rw-r--r--arch/x86/kernel/setup.c10
-rw-r--r--arch/x86/kernel/tsc.c11
-rw-r--r--arch/x86/kernel/tsc_msr.c30
-rw-r--r--arch/x86/kvm/mmu.c1
-rw-r--r--arch/x86/kvm/vmx.c2
-rw-r--r--arch/x86/kvm/x86.c2
-rw-r--r--arch/x86/mm/fault.c61
-rw-r--r--arch/x86/mm/numa.c21
-rw-r--r--arch/x86/mm/numa_32.c2
-rw-r--r--arch/x86/mm/srat.c16
-rw-r--r--arch/x86/mm/tlb.c52
-rw-r--r--arch/x86/platform/efi/efi-bgrt.c12
-rw-r--r--arch/x86/platform/efi/efi.c25
-rw-r--r--arch/x86/platform/efi/efi_32.c6
-rw-r--r--arch/x86/platform/efi/efi_64.c9
-rw-r--r--arch/x86/xen/enlighten.c12
-rw-r--r--arch/x86/xen/mmu.c4
-rw-r--r--arch/x86/xen/p2m.c17
-rw-r--r--arch/xtensa/Kconfig3
-rw-r--r--arch/xtensa/boot/dts/xtfpga.dtsi12
-rw-r--r--arch/xtensa/include/asm/io.h2
-rw-r--r--arch/xtensa/include/asm/traps.h44
-rw-r--r--arch/xtensa/include/asm/vectors.h2
-rw-r--r--arch/xtensa/include/uapi/asm/unistd.h7
-rw-r--r--arch/xtensa/kernel/entry.S449
-rw-r--r--arch/xtensa/kernel/setup.c2
-rw-r--r--arch/xtensa/kernel/time.c1
-rw-r--r--arch/xtensa/kernel/vectors.S2
-rw-r--r--arch/xtensa/kernel/xtensa_ksyms.c2
-rw-r--r--arch/xtensa/mm/init.c13
-rw-r--r--arch/xtensa/mm/mmu.c2
-rw-r--r--arch/xtensa/platforms/xtfpga/setup.c7
-rw-r--r--arch/xtensa/variants/fsf/include/variant/tie.h9
-rw-r--r--block/blk-core.c20
-rw-r--r--block/blk-exec.c2
-rw-r--r--block/blk-flush.c105
-rw-r--r--block/blk-lib.c8
-rw-r--r--block/blk-merge.c91
-rw-r--r--block/blk-mq-cpu.c14
-rw-r--r--block/blk-mq-tag.c2
-rw-r--r--block/blk-mq.c237
-rw-r--r--block/blk-mq.h5
-rw-r--r--block/blk-sysfs.c2
-rw-r--r--block/blk-timeout.c2
-rw-r--r--block/blk.h2
-rw-r--r--drivers/acpi/ac.c2
-rw-r--r--drivers/acpi/battery.c4
-rw-r--r--drivers/acpi/blacklist.c58
-rw-r--r--drivers/acpi/button.c2
-rw-r--r--drivers/acpi/container.c5
-rw-r--r--drivers/acpi/dock.c13
-rw-r--r--drivers/acpi/ec.c64
-rw-r--r--drivers/acpi/fan.c3
-rw-r--r--drivers/acpi/pci_irq.c1
-rw-r--r--drivers/acpi/proc.c2
-rw-r--r--drivers/acpi/processor_throttling.c69
-rw-r--r--drivers/acpi/resource.c10
-rw-r--r--drivers/acpi/sbs.c4
-rw-r--r--drivers/acpi/scan.c6
-rw-r--r--drivers/acpi/thermal.c2
-rw-r--r--drivers/acpi/utils.c4
-rw-r--r--drivers/acpi/video.c147
-rw-r--r--drivers/acpi/video_detect.c8
-rw-r--r--drivers/ata/Kconfig1
-rw-r--r--drivers/ata/ahci.c18
-rw-r--r--drivers/ata/libata-core.c2
-rw-r--r--drivers/ata/libata-pmp.c7
-rw-r--r--drivers/ata/pata_imx.c8
-rw-r--r--drivers/ata/sata_mv.c16
-rw-r--r--drivers/ata/sata_sil.c1
-rw-r--r--drivers/base/component.c8
-rw-r--r--drivers/base/dma-buf.c25
-rw-r--r--drivers/base/firmware_class.c1
-rw-r--r--drivers/block/aoe/aoecmd.c4
-rw-r--r--drivers/block/mtip32xx/mtip32xx.h2
-rw-r--r--drivers/block/null_blk.c97
-rw-r--r--drivers/block/nvme-core.c610
-rw-r--r--drivers/block/nvme-scsi.c147
-rw-r--r--drivers/block/virtio_blk.c7
-rw-r--r--drivers/block/xen-blkback/blkback.c81
-rw-r--r--drivers/block/xen-blkback/common.h5
-rw-r--r--drivers/block/xen-blkback/xenbus.c14
-rw-r--r--drivers/block/xen-blkfront.c11
-rw-r--r--drivers/block/zram/zram_drv.c2
-rw-r--r--drivers/char/Kconfig1
-rw-r--r--drivers/char/raw.c2
-rw-r--r--drivers/char/virtio_console.c9
-rw-r--r--drivers/clk/at91/clk-master.c2
-rw-r--r--drivers/clk/clk-nomadik.c3
-rw-r--r--drivers/clk/clk.c13
-rw-r--r--drivers/clk/keystone/gate.c1
-rw-r--r--drivers/clk/mvebu/armada-370.c21
-rw-r--r--drivers/clk/mvebu/armada-xp.c20
-rw-r--r--drivers/clk/mvebu/dove.c19
-rw-r--r--drivers/clk/mvebu/kirkwood.c34
-rw-r--r--drivers/clk/shmobile/clk-rcar-gen2.c48
-rw-r--r--drivers/clk/tegra/clk-divider.c2
-rw-r--r--drivers/clk/tegra/clk-id.h4
-rw-r--r--drivers/clk/tegra/clk-tegra-periph.c10
-rw-r--r--drivers/clk/tegra/clk-tegra-super-gen4.c2
-rw-r--r--drivers/clk/tegra/clk-tegra114.c8
-rw-r--r--drivers/clk/tegra/clk-tegra124.c48
-rw-r--r--drivers/clk/tegra/clk-tegra20.c2
-rw-r--r--drivers/clocksource/bcm_kona_timer.c54
-rw-r--r--drivers/cpufreq/cpufreq.c54
-rw-r--r--drivers/cpufreq/intel_pstate.c61
-rw-r--r--drivers/cpufreq/powernow-k8.c10
-rw-r--r--drivers/crypto/nx/nx-842.c29
-rw-r--r--drivers/dma/Kconfig1
-rw-r--r--drivers/dma/imx-sdma.c1
-rw-r--r--drivers/dma/ioat/dma.c52
-rw-r--r--drivers/dma/ioat/dma.h1
-rw-r--r--drivers/dma/ioat/dma_v2.c11
-rw-r--r--drivers/dma/ioat/dma_v3.c3
-rw-r--r--drivers/dma/mv_xor.c24
-rw-r--r--drivers/dma/ste_dma40.c4
-rw-r--r--drivers/edac/edac_mc.c13
-rw-r--r--drivers/edac/edac_mc_sysfs.c10
-rw-r--r--drivers/edac/edac_module.h2
-rw-r--r--drivers/edac/i7300_edac.c38
-rw-r--r--drivers/edac/i7core_edac.c9
-rw-r--r--drivers/extcon/extcon-arizona.c12
-rw-r--r--drivers/firewire/core-device.c22
-rw-r--r--drivers/firewire/net.c6
-rw-r--r--drivers/firewire/ohci.c15
-rw-r--r--drivers/firewire/sbp2.c17
-rw-r--r--drivers/fmc/fmc-write-eeprom.c2
-rw-r--r--drivers/gpio/Kconfig1
-rw-r--r--drivers/gpio/gpio-bcm-kona.c4
-rw-r--r--drivers/gpio/gpio-clps711x.c1
-rw-r--r--drivers/gpio/gpio-intel-mid.c4
-rw-r--r--drivers/gpio/gpio-xtensa.c16
-rw-r--r--drivers/gpu/drm/armada/armada_drv.c10
-rw-r--r--drivers/gpu/drm/ast/ast_fb.c2
-rw-r--r--drivers/gpu/drm/bochs/Kconfig1
-rw-r--r--drivers/gpu/drm/cirrus/cirrus_fbdev.c2
-rw-r--r--drivers/gpu/drm/drm_ioctl.c12
-rw-r--r--drivers/gpu/drm/exynos/Kconfig4
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_drv.c14
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_g2d.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_ipp.c3
-rw-r--r--drivers/gpu/drm/exynos/exynos_hdmi.c66
-rw-r--r--drivers/gpu/drm/i2c/tda998x_drv.c19
-rw-r--r--drivers/gpu/drm/i915/i915_drv.c23
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h8
-rw-r--r--drivers/gpu/drm/i915/i915_gem_stolen.c19
-rw-r--r--drivers/gpu/drm/i915/i915_gpu_error.c5
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c3
-rw-r--r--drivers/gpu/drm/i915/intel_display.c22
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c31
-rw-r--r--drivers/gpu/drm/i915/intel_hdmi.c6
-rw-r--r--drivers/gpu/drm/i915/intel_i2c.c7
-rw-r--r--drivers/gpu/drm/i915/intel_opregion.c9
-rw-r--r--drivers/gpu/drm/i915/intel_panel.c4
-rw-r--r--drivers/gpu/drm/i915/intel_pm.c6
-rw-r--r--drivers/gpu/drm/i915/intel_ringbuffer.c21
-rw-r--r--drivers/gpu/drm/i915/intel_ringbuffer.h1
-rw-r--r--drivers/gpu/drm/mgag200/mgag200_fb.c2
-rw-r--r--drivers/gpu/drm/mgag200/mgag200_mode.c4
-rw-r--r--drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c179
-rw-r--r--drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c4
-rw-r--r--drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c7
-rw-r--r--drivers/gpu/drm/msm/msm_gem.c2
-rw-r--r--drivers/gpu/drm/msm/msm_gem_submit.c9
-rw-r--r--drivers/gpu/drm/msm/msm_gpu.c3
-rw-r--r--drivers/gpu/drm/nouveau/Makefile1
-rw-r--r--drivers/gpu/drm/nouveau/core/engine/device/nv40.c10
-rw-r--r--drivers/gpu/drm/nouveau/core/engine/disp/nv50.c2
-rw-r--r--drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c2
-rw-r--r--drivers/gpu/drm/nouveau/core/engine/graph/nv50.c2
-rw-r--r--drivers/gpu/drm/nouveau/core/include/subdev/mc.h1
-rw-r--r--drivers/gpu/drm/nouveau/core/subdev/bios/base.c4
-rw-r--r--drivers/gpu/drm/nouveau/core/subdev/fb/nv1a.c2
-rw-r--r--drivers/gpu/drm/nouveau/core/subdev/mc/nv04.h1
-rw-r--r--drivers/gpu/drm/nouveau/core/subdev/mc/nv44.c2
-rw-r--r--drivers/gpu/drm/nouveau/core/subdev/mc/nv4c.c45
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_acpi.c26
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_bo.c2
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_drm.c3
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_vga.c4
-rw-r--r--drivers/gpu/drm/radeon/atombios_crtc.c31
-rw-r--r--drivers/gpu/drm/radeon/atombios_encoders.c9
-rw-r--r--drivers/gpu/drm/radeon/btc_dpm.c32
-rw-r--r--drivers/gpu/drm/radeon/btcd.h4
-rw-r--r--drivers/gpu/drm/radeon/cik.c5
-rw-r--r--drivers/gpu/drm/radeon/dce6_afmt.c15
-rw-r--r--drivers/gpu/drm/radeon/evergreen.c7
-rw-r--r--drivers/gpu/drm/radeon/evergreen_hdmi.c26
-rw-r--r--drivers/gpu/drm/radeon/evergreen_smc.h2
-rw-r--r--drivers/gpu/drm/radeon/kv_dpm.c2
-rw-r--r--drivers/gpu/drm/radeon/ni.c3
-rw-r--r--drivers/gpu/drm/radeon/ni_dpm.c10
-rw-r--r--drivers/gpu/drm/radeon/r100.c2
-rw-r--r--drivers/gpu/drm/radeon/r300.c2
-rw-r--r--drivers/gpu/drm/radeon/r420.c2
-rw-r--r--drivers/gpu/drm/radeon/r520.c2
-rw-r--r--drivers/gpu/drm/radeon/r600.c7
-rw-r--r--drivers/gpu/drm/radeon/r600_audio.c14
-rw-r--r--drivers/gpu/drm/radeon/r600_cs.c18
-rw-r--r--drivers/gpu/drm/radeon/r600_hdmi.c15
-rw-r--r--drivers/gpu/drm/radeon/radeon.h10
-rw-r--r--drivers/gpu/drm/radeon/radeon_asic.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_asic.h2
-rw-r--r--drivers/gpu/drm/radeon/radeon_atpx_handler.c3
-rw-r--r--drivers/gpu/drm/radeon/radeon_device.c5
-rw-r--r--drivers/gpu/drm/radeon/radeon_display.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_drv.c3
-rw-r--r--drivers/gpu/drm/radeon/radeon_kms.c6
-rw-r--r--drivers/gpu/drm/radeon/radeon_ring.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_semaphore.c19
-rw-r--r--drivers/gpu/drm/radeon/radeon_ttm.c5
-rw-r--r--drivers/gpu/drm/radeon/radeon_uvd.c2
-rw-r--r--drivers/gpu/drm/radeon/reg_srcs/r6001
-rw-r--r--drivers/gpu/drm/radeon/rs400.c2
-rw-r--r--drivers/gpu/drm/radeon/rs600.c2
-rw-r--r--drivers/gpu/drm/radeon/rs690.c2
-rw-r--r--drivers/gpu/drm/radeon/rv515.c2
-rw-r--r--drivers/gpu/drm/radeon/rv770.c5
-rw-r--r--drivers/gpu/drm/radeon/rv770_dpm.c14
-rw-r--r--drivers/gpu/drm/radeon/si.c7
-rw-r--r--drivers/gpu/drm/radeon/si_dpm.c5
-rw-r--r--drivers/gpu/drm/radeon/sumo_dpm.c2
-rw-r--r--drivers/gpu/drm/radeon/trinity_dpm.c3
-rw-r--r--drivers/gpu/drm/radeon/uvd_v2_2.c1
-rw-r--r--drivers/gpu/drm/tegra/drm.c2
-rw-r--r--drivers/gpu/drm/tegra/rgb.c11
-rw-r--r--drivers/gpu/drm/ttm/ttm_agp_backend.c1
-rw-r--r--drivers/gpu/drm/ttm/ttm_object.c2
-rw-r--r--drivers/gpu/drm/ttm/ttm_tt.c3
-rw-r--r--drivers/gpu/drm/vmwgfx/svga3d_reg.h153
-rw-r--r--drivers/gpu/drm/vmwgfx/svga3d_surfacedefs.h11
-rw-r--r--drivers/gpu/drm/vmwgfx/svga_reg.h9
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_context.c141
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_drv.c10
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_drv.h38
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c337
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c96
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_mob.c36
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_resource.c14
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_shader.c469
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_surface.c6
-rw-r--r--drivers/gpu/host1x/job.c2
-rw-r--r--drivers/hid/hid-apple.c3
-rw-r--r--drivers/hid/hid-core.c3
-rw-r--r--drivers/hid/hid-hyperv.c11
-rw-r--r--drivers/hid/hid-ids.h8
-rw-r--r--drivers/hid/hid-input.c2
-rw-r--r--drivers/hid/hid-microsoft.c4
-rw-r--r--drivers/hid/hid-multitouch.c5
-rw-r--r--drivers/hid/hid-sensor-hub.c3
-rw-r--r--drivers/hid/i2c-hid/i2c-hid.c2
-rw-r--r--drivers/hid/usbhid/hid-quirks.c1
-rw-r--r--drivers/hv/connection.c13
-rw-r--r--drivers/hwmon/da9055-hwmon.c4
-rw-r--r--drivers/hwmon/max1668.c2
-rw-r--r--drivers/hwmon/ntc_thermistor.c6
-rw-r--r--drivers/hwmon/pmbus/pmbus_core.c68
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c33
-rw-r--r--drivers/iio/accel/bma180.c16
-rw-r--r--drivers/iio/adc/max1363.c2
-rw-r--r--drivers/iio/gyro/Kconfig2
-rw-r--r--drivers/iio/gyro/st_gyro.h1
-rw-r--r--drivers/iio/gyro/st_gyro_core.c9
-rw-r--r--drivers/iio/gyro/st_gyro_i2c.c1
-rw-r--r--drivers/iio/gyro/st_gyro_spi.c1
-rw-r--r--drivers/iio/imu/adis16400.h1
-rw-r--r--drivers/iio/imu/adis16400_core.c10
-rw-r--r--drivers/iio/light/cm32181.c16
-rw-r--r--drivers/iio/light/cm36651.c45
-rw-r--r--drivers/iio/light/tsl2563.c16
-rw-r--r--drivers/iio/magnetometer/ak8975.c16
-rw-r--r--drivers/iio/magnetometer/mag3110.c8
-rw-r--r--drivers/infiniband/hw/amso1100/c2.c4
-rw-r--r--drivers/infiniband/hw/amso1100/c2_rnic.c3
-rw-r--r--drivers/infiniband/hw/cxgb4/cm.c1
-rw-r--r--drivers/infiniband/hw/mlx4/main.c189
-rw-r--r--drivers/infiniband/hw/mlx5/Kconfig2
-rw-r--r--drivers/infiniband/hw/mlx5/main.c26
-rw-r--r--drivers/infiniband/hw/mlx5/qp.c18
-rw-r--r--drivers/infiniband/hw/mlx5/user.h7
-rw-r--r--drivers/infiniband/hw/nes/nes.c5
-rw-r--r--drivers/infiniband/hw/ocrdma/ocrdma_main.c2
-rw-r--r--drivers/infiniband/hw/ocrdma/ocrdma_verbs.c4
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7322.c5
-rw-r--r--drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c9
-rw-r--r--drivers/infiniband/ulp/iser/iser_initiator.c3
-rw-r--r--drivers/infiniband/ulp/iser/iser_verbs.c10
-rw-r--r--drivers/infiniband/ulp/isert/ib_isert.c181
-rw-r--r--drivers/infiniband/ulp/isert/ib_isert.h7
-rw-r--r--drivers/infiniband/ulp/srpt/ib_srpt.c14
-rw-r--r--drivers/input/misc/arizona-haptics.c19
-rw-r--r--drivers/iommu/arm-smmu.c105
-rw-r--r--drivers/iommu/omap-iommu-debug.c4
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/irqchip/irq-armada-370-xp.c4
-rw-r--r--drivers/irqchip/irq-metag-ext.c2
-rw-r--r--drivers/irqchip/irq-metag.c2
-rw-r--r--drivers/irqchip/irq-orion.c22
-rw-r--r--drivers/irqchip/irq-zevio.c127
-rw-r--r--drivers/isdn/hisax/q931.c2
-rw-r--r--drivers/md/Kconfig10
-rw-r--r--drivers/md/bcache/bcache.h4
-rw-r--r--drivers/md/bcache/bset.c7
-rw-r--r--drivers/md/bcache/btree.c4
-rw-r--r--drivers/md/bcache/extents.c2
-rw-r--r--drivers/md/bcache/request.c6
-rw-r--r--drivers/md/bcache/sysfs.c2
-rw-r--r--drivers/md/dm-cache-policy-mq.c4
-rw-r--r--drivers/md/dm-cache-target.c13
-rw-r--r--drivers/md/dm-io.c23
-rw-r--r--drivers/md/dm-mpath.c7
-rw-r--r--drivers/md/dm-raid1.c3
-rw-r--r--drivers/md/dm-snap-persistent.c3
-rw-r--r--drivers/md/dm-thin-metadata.c58
-rw-r--r--drivers/md/dm-thin-metadata.h21
-rw-r--r--drivers/md/dm-thin.c343
-rw-r--r--drivers/md/persistent-data/Kconfig10
-rw-r--r--drivers/md/persistent-data/dm-space-map-metadata.c115
-rw-r--r--drivers/md/persistent-data/dm-space-map-metadata.h11
-rw-r--r--drivers/md/raid1.c13
-rw-r--r--drivers/md/raid5.c90
-rw-r--r--drivers/media/dvb-frontends/cx24117.c10
-rw-r--r--drivers/media/dvb-frontends/nxt200x.c2
-rw-r--r--drivers/media/i2c/adv7842.c2
-rw-r--r--drivers/media/i2c/s5k5baf.c30
-rw-r--r--drivers/media/pci/bt8xx/bttv-cards.c2
-rw-r--r--drivers/media/pci/bt8xx/bttv-gpio.c2
-rw-r--r--drivers/media/pci/saa7134/saa7134-cards.c2
-rw-r--r--drivers/media/platform/exynos4-is/fimc-core.c5
-rw-r--r--drivers/media/platform/exynos4-is/fimc-lite.c7
-rw-r--r--drivers/media/platform/s5p-jpeg/jpeg-core.c8
-rw-r--r--drivers/media/usb/dvb-usb-v2/af9035.c2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c4
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c4
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h4
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf.c6
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf.h2
-rw-r--r--drivers/media/usb/hdpvr/hdpvr-core.c4
-rw-r--r--drivers/media/v4l2-core/v4l2-dv-timings.c1
-rw-r--r--drivers/media/v4l2-core/videobuf-dma-contig.c12
-rw-r--r--drivers/media/v4l2-core/videobuf-dma-sg.c10
-rw-r--r--drivers/media/v4l2-core/videobuf-vmalloc.c10
-rw-r--r--drivers/media/v4l2-core/videobuf2-core.c5
-rw-r--r--drivers/message/i2o/i2o_config.c4
-rw-r--r--drivers/mfd/da9055-i2c.c12
-rw-r--r--drivers/mfd/max14577.c2
-rw-r--r--drivers/mfd/max8997.c6
-rw-r--r--drivers/mfd/max8998.c6
-rw-r--r--drivers/mfd/sec-core.c2
-rw-r--r--drivers/mfd/tps65217.c4
-rw-r--r--drivers/mfd/wm8994-core.c2
-rw-r--r--drivers/misc/genwqe/card_dev.c1
-rw-r--r--drivers/misc/mei/client.c15
-rw-r--r--drivers/misc/mic/host/mic_virtio.c3
-rw-r--r--drivers/misc/sgi-gru/grukdump.c11
-rw-r--r--drivers/mmc/card/queue.c2
-rw-r--r--drivers/mtd/nand/nand_base.c2
-rw-r--r--drivers/mtd/nand/omap2.c61
-rw-r--r--drivers/mtd/ubi/fastmap.c8
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/net/bonding/bond_3ad.c22
-rw-r--r--drivers/net/bonding/bond_3ad.h1
-rw-r--r--drivers/net/bonding/bond_main.c159
-rw-r--r--drivers/net/bonding/bond_options.c2
-rw-r--r--drivers/net/bonding/bonding.h47
-rw-r--r--drivers/net/can/Kconfig2
-rw-r--r--drivers/net/can/dev.c15
-rw-r--r--drivers/net/can/flexcan.c179
-rw-r--r--drivers/net/can/janz-ican3.c20
-rw-r--r--drivers/net/can/usb/kvaser_usb.c2
-rw-r--r--drivers/net/can/vcan.c9
-rw-r--r--drivers/net/ethernet/3com/3c59x.c2
-rw-r--r--drivers/net/ethernet/allwinner/sun4i-emac.c3
-rw-r--r--drivers/net/ethernet/atheros/alx/main.c1
-rw-r--r--drivers/net/ethernet/broadcom/b44.c14
-rw-r--r--drivers/net/ethernet/broadcom/bnx2.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c13
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h4
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c12
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c6
-rw-r--r--drivers/net/ethernet/broadcom/tg3.c20
-rw-r--r--drivers/net/ethernet/broadcom/tg3.h6
-rw-r--r--drivers/net/ethernet/brocade/bna/bnad.c40
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c1
-rw-r--r--drivers/net/ethernet/dec/tulip/tulip_core.c1
-rw-r--r--drivers/net/ethernet/emulex/benet/be.h4
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c84
-rw-r--r--drivers/net/ethernet/ethoc.c138
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c17
-rw-r--r--drivers/net/ethernet/intel/e100.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c6
-rw-r--r--drivers/net/ethernet/lantiq_etop.c2
-rw-r--r--drivers/net/ethernet/marvell/Kconfig6
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_tx.c4
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mlx4.h4
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mlx4_en.h6
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/Kconfig2
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/main.c4
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-main.c6
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c1
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c4
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c5
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c9
-rw-r--r--drivers/net/ethernet/realtek/r8169.c2
-rw-r--r--drivers/net/ethernet/sfc/ptp.c7
-rw-r--r--drivers/net/ethernet/sfc/tx.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig11
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Makefile1
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c330
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac.h3
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c5
-rw-r--r--drivers/net/ethernet/ti/cpsw.c31
-rw-r--r--drivers/net/ethernet/tile/tilegx.c2
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet_main.c13
-rw-r--r--drivers/net/hyperv/netvsc_drv.c53
-rw-r--r--drivers/net/irda/Kconfig7
-rw-r--r--drivers/net/irda/Makefile1
-rw-r--r--drivers/net/irda/ep7211-sir.c70
-rw-r--r--drivers/net/irda/irtty-sir.c1
-rw-r--r--drivers/net/macvlan.c12
-rw-r--r--drivers/net/phy/dp83640.c32
-rw-r--r--drivers/net/phy/mdio-sun4i.c3
-rw-r--r--drivers/net/phy/phy_device.c54
-rw-r--r--drivers/net/team/team.c2
-rw-r--r--drivers/net/tun.c6
-rw-r--r--drivers/net/usb/Kconfig15
-rw-r--r--drivers/net/usb/Makefile1
-rw-r--r--drivers/net/usb/asix_devices.c3
-rw-r--r--drivers/net/usb/ax88179_178a.c46
-rw-r--r--drivers/net/usb/gl620a.c4
-rw-r--r--drivers/net/usb/hso.c32
-rw-r--r--drivers/net/usb/mcs7830.c5
-rw-r--r--drivers/net/usb/net1080.c4
-rw-r--r--drivers/net/usb/qmi_wwan.c11
-rw-r--r--drivers/net/usb/r8152.c17
-rw-r--r--drivers/net/usb/rndis_host.c4
-rw-r--r--drivers/net/usb/smsc75xx.c4
-rw-r--r--drivers/net/usb/smsc95xx.c4
-rw-r--r--drivers/net/usb/sr9800.c874
-rw-r--r--drivers/net/usb/sr9800.h202
-rw-r--r--drivers/net/usb/usbnet.c25
-rw-r--r--drivers/net/veth.c3
-rw-r--r--drivers/net/virtio_net.c3
-rw-r--r--drivers/net/vxlan.c3
-rw-r--r--drivers/net/wan/dlci.c5
-rw-r--r--drivers/net/wireless/ath/ar5523/ar5523.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c2
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_eeprom.c4
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h4
-rw-r--r--drivers/net/wireless/ath/ath9k/htc.h2
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_init.c8
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_main.c63
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.c13
-rw-r--r--drivers/net/wireless/ath/ath9k/init.c8
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c70
-rw-r--r--drivers/net/wireless/ath/ath9k/xmit.c13
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c14
-rw-r--r--drivers/net/wireless/hostap/hostap_ap.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_proc.c2
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/mac80211.c22
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/sta.c1
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/tx.c14
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-drv.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-modparams.h11
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-nvm-parse.c5
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/mac80211.c24
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/mvm.h2
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/scan.c5
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/sta.c2
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/tx.c91
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/utils.c2
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/drv.c7
-rw-r--r--drivers/net/wireless/libertas/cfg.c2
-rw-r--r--drivers/net/wireless/mwifiex/main.c2
-rw-r--r--drivers/net/wireless/mwifiex/pcie.c34
-rw-r--r--drivers/net/wireless/mwifiex/usb.c12
-rw-r--r--drivers/net/wireless/mwifiex/wmm.c3
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c5
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180/dev.c23
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187/rtl8187.h10
-rw-r--r--drivers/net/wireless/rtlwifi/ps.c2
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192ce/hw.c18
-rw-r--r--drivers/net/xen-netback/common.h6
-rw-r--r--drivers/net/xen-netback/interface.c1
-rw-r--r--drivers/net/xen-netback/netback.c16
-rw-r--r--drivers/net/xen-netfront.c6
-rw-r--r--drivers/of/address.c5
-rw-r--r--drivers/of/base.c128
-rw-r--r--drivers/of/of_mdio.c22
-rw-r--r--drivers/of/selftest.c67
-rw-r--r--drivers/of/testcase-data/testcases.dtsi3
-rw-r--r--drivers/of/testcase-data/tests-interrupts.dtsi (renamed from arch/arm/boot/dts/testcases/tests-interrupts.dtsi)0
-rw-r--r--drivers/of/testcase-data/tests-match.dtsi19
-rw-r--r--drivers/of/testcase-data/tests-phandle.dtsi (renamed from arch/arm/boot/dts/testcases/tests-phandle.dtsi)0
-rw-r--r--drivers/pci/host/pci-mvebu.c11
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c70
-rw-r--r--drivers/pci/msi.c10
-rw-r--r--drivers/pci/pci.c10
-rw-r--r--drivers/phy/Kconfig3
-rw-r--r--drivers/phy/phy-core.c76
-rw-r--r--drivers/phy/phy-exynos-dp-video.c8
-rw-r--r--drivers/phy/phy-exynos-mipi-video.c10
-rw-r--r--drivers/phy/phy-mvebu-sata.c10
-rw-r--r--drivers/phy/phy-omap-usb2.c10
-rw-r--r--drivers/phy/phy-twl4030-usb.c10
-rw-r--r--drivers/pinctrl/Kconfig2
-rw-r--r--drivers/pinctrl/core.c8
-rw-r--r--drivers/pinctrl/pinctrl-at91.c10
-rw-r--r--drivers/pinctrl/pinctrl-capri.c2
-rw-r--r--drivers/pinctrl/pinctrl-imx1-core.c10
-rw-r--r--drivers/pinctrl/pinctrl-sunxi.c6
-rw-r--r--drivers/pinctrl/pinctrl-sunxi.h6
-rw-r--r--drivers/pinctrl/pinctrl-tegra.c2
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-r8a7791.c6
-rw-r--r--drivers/pinctrl/sirf/pinctrl-prima2.c2
-rw-r--r--drivers/pinctrl/sirf/pinctrl-sirf.c4
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-wmt.c15
-rw-r--r--drivers/power/ds2782_battery.c2
-rw-r--r--drivers/power/isp1704_charger.c2
-rw-r--r--drivers/power/max17040_battery.c5
-rw-r--r--drivers/pwm/pwm-lp3943.c4
-rw-r--r--drivers/rapidio/devices/tsi721.h1
-rw-r--r--drivers/rapidio/devices/tsi721_dma.c27
-rw-r--r--drivers/regulator/ab3100.c4
-rw-r--r--drivers/regulator/core.c59
-rw-r--r--drivers/regulator/da9055-regulator.c4
-rw-r--r--drivers/regulator/da9063-regulator.c4
-rw-r--r--drivers/regulator/max14577.c10
-rw-r--r--drivers/regulator/s2mps11.c1
-rw-r--r--drivers/regulator/s5m8767.c4
-rw-r--r--drivers/rtc/rtc-s3c.c17
-rw-r--r--drivers/s390/cio/chsc.c1
-rw-r--r--drivers/s390/cio/cio.c40
-rw-r--r--drivers/s390/cio/qdio.h14
-rw-r--r--drivers/s390/cio/qdio_main.c2
-rw-r--r--drivers/s390/crypto/zcrypt_msgtype6.c24
-rw-r--r--drivers/s390/net/qeth_core_main.c5
-rw-r--r--drivers/s390/net/qeth_l2_main.c3
-rw-r--r--drivers/s390/net/qeth_l3_main.c3
-rw-r--r--drivers/sbus/char/jsflash.c1
-rw-r--r--drivers/scsi/qla2xxx/qla_target.c44
-rw-r--r--drivers/scsi/qla2xxx/qla_target.h3
-rw-r--r--drivers/scsi/qla2xxx/tcm_qla2xxx.c158
-rw-r--r--drivers/scsi/qla2xxx/tcm_qla2xxx.h7
-rw-r--r--drivers/scsi/scsi_lib.c2
-rw-r--r--drivers/spi/Kconfig4
-rw-r--r--drivers/spi/spi-ath79.c4
-rw-r--r--drivers/spi/spi-atmel.c17
-rw-r--r--drivers/spi/spi-coldfire-qspi.c6
-rw-r--r--drivers/spi/spi-fsl-dspi.c6
-rw-r--r--drivers/spi/spi-imx.c4
-rw-r--r--drivers/spi/spi-nuc900.c2
-rw-r--r--drivers/spi/spi-topcliff-pch.c15
-rw-r--r--drivers/spi/spi.c4
-rw-r--r--drivers/staging/android/ashmem.c45
-rw-r--r--drivers/staging/android/binder.c3
-rw-r--r--drivers/staging/android/ion/compat_ion.c26
-rw-r--r--drivers/staging/android/ion/ion_dummy_driver.c12
-rw-r--r--drivers/staging/android/ion/ion_heap.c2
-rw-r--r--drivers/staging/android/ion/ion_priv.h1
-rw-r--r--drivers/staging/android/ion/ion_system_heap.c6
-rw-r--r--drivers/staging/android/sw_sync.h17
-rw-r--r--drivers/staging/android/sync.c14
-rw-r--r--drivers/staging/bcm/Bcmnet.c2
-rw-r--r--drivers/staging/comedi/drivers.c2
-rw-r--r--drivers/staging/comedi/drivers/adv_pci1710.c17
-rw-r--r--drivers/staging/comedi/drivers/usbduxsigma.c6
-rw-r--r--drivers/staging/cxt1e1/linux.c2
-rw-r--r--drivers/staging/dgrp/dgrp_net_ops.c330
-rw-r--r--drivers/staging/gdm72xx/gdm_usb.c3
-rw-r--r--drivers/staging/iio/Documentation/iio_utils.h6
-rw-r--r--drivers/staging/iio/adc/ad799x_core.c13
-rw-r--r--drivers/staging/iio/adc/mxs-lradc.c7
-rw-r--r--drivers/staging/iio/impedance-analyzer/ad5933.c2
-rw-r--r--drivers/staging/imx-drm/imx-drm-core.c55
-rw-r--r--drivers/staging/imx-drm/imx-hdmi.c22
-rw-r--r--drivers/staging/lustre/TODO5
-rw-r--r--drivers/staging/lustre/include/linux/libcfs/libcfs_kernelcomm.h2
-rw-r--r--drivers/staging/lustre/include/linux/libcfs/libcfs_private.h2
-rw-r--r--drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c2
-rw-r--r--drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c5
-rw-r--r--drivers/staging/lustre/lustre/include/lustre/lustre_user.h3
-rw-r--r--drivers/staging/lustre/lustre/llite/dir.c2
-rw-r--r--drivers/staging/lustre/lustre/mdc/mdc_request.c6
-rw-r--r--drivers/staging/media/go7007/go7007-loader.c4
-rw-r--r--drivers/staging/netlogic/xlr_net.c7
-rw-r--r--drivers/staging/octeon-usb/octeon-hcd.c273
-rw-r--r--drivers/staging/ozwpan/ozproto.c3
-rw-r--r--drivers/staging/rtl8188eu/core/rtw_wlan_util.c22
-rw-r--r--drivers/staging/rtl8188eu/os_dep/ioctl_linux.c12
-rw-r--r--drivers/staging/rtl8188eu/os_dep/os_intfs.c2
-rw-r--r--drivers/staging/rtl8188eu/os_dep/usb_intf.c3
-rw-r--r--drivers/staging/rtl8821ae/Kconfig2
-rw-r--r--drivers/staging/rtl8821ae/wifi.h2
-rw-r--r--drivers/staging/usbip/userspace/libsrc/names.c8
-rw-r--r--drivers/staging/usbip/vhci_sysfs.c3
-rw-r--r--drivers/staging/wlags49_h2/wl_wext.c2
-rw-r--r--drivers/target/iscsi/iscsi_target.c10
-rw-r--r--drivers/target/iscsi/iscsi_target_erl1.c4
-rw-r--r--drivers/target/iscsi/iscsi_target_erl2.c16
-rw-r--r--drivers/target/iscsi/iscsi_target_tpg.c2
-rw-r--r--drivers/target/target_core_alua.c2
-rw-r--r--drivers/target/target_core_pr.c11
-rw-r--r--drivers/target/target_core_sbc.c39
-rw-r--r--drivers/target/target_core_spc.c4
-rw-r--r--drivers/target/target_core_transport.c8
-rw-r--r--drivers/thermal/Kconfig13
-rw-r--r--drivers/thermal/thermal_core.c27
-rw-r--r--drivers/thermal/x86_pkg_temp_thermal.c11
-rw-r--r--drivers/tty/hvc/hvc_opal.c8
-rw-r--r--drivers/tty/hvc/hvc_rtas.c12
-rw-r--r--drivers/tty/hvc/hvc_udbg.c9
-rw-r--r--drivers/tty/hvc/hvc_xen.c17
-rw-r--r--drivers/tty/n_gsm.c11
-rw-r--r--drivers/tty/n_tty.c14
-rw-r--r--drivers/tty/serial/8250/8250_core.c18
-rw-r--r--drivers/tty/serial/8250/8250_dw.c4
-rw-r--r--drivers/tty/serial/8250/8250_pci.c3
-rw-r--r--drivers/tty/serial/omap-serial.c11
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c4
-rw-r--r--drivers/tty/vt/vt.c2
-rw-r--r--drivers/usb/chipidea/udc.c4
-rw-r--r--drivers/usb/core/config.c4
-rw-r--r--drivers/usb/core/driver.c24
-rw-r--r--drivers/usb/core/hcd.c1
-rw-r--r--drivers/usb/core/hub.c7
-rw-r--r--drivers/usb/core/quirks.c4
-rw-r--r--drivers/usb/core/usb.h1
-rw-r--r--drivers/usb/dwc2/core.c2
-rw-r--r--drivers/usb/dwc2/hcd.c11
-rw-r--r--drivers/usb/dwc2/platform.c3
-rw-r--r--drivers/usb/gadget/bcm63xx_udc.c58
-rw-r--r--drivers/usb/gadget/f_fs.c7
-rw-r--r--drivers/usb/gadget/printer.c2
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c2
-rw-r--r--drivers/usb/host/ehci-hcd.c13
-rw-r--r--drivers/usb/host/ehci-hub.c26
-rw-r--r--drivers/usb/host/xhci-dbg.c6
-rw-r--r--drivers/usb/host/xhci-mem.c14
-rw-r--r--drivers/usb/host/xhci-pci.c5
-rw-r--r--drivers/usb/host/xhci-ring.c68
-rw-r--r--drivers/usb/host/xhci.c24
-rw-r--r--drivers/usb/host/xhci.h41
-rw-r--r--drivers/usb/musb/musb_core.c15
-rw-r--r--drivers/usb/musb/musb_host.c3
-rw-r--r--drivers/usb/musb/musb_virthub.c26
-rw-r--r--drivers/usb/musb/omap2430.c2
-rw-r--r--drivers/usb/phy/phy-msm-usb.c57
-rw-r--r--drivers/usb/phy/phy.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.c5
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h13
-rw-r--r--drivers/usb/serial/option.c6
-rw-r--r--drivers/usb/serial/qcserial.c3
-rw-r--r--drivers/usb/serial/usb-serial-simple.c3
-rw-r--r--drivers/usb/storage/Kconfig4
-rw-r--r--drivers/usb/storage/scsiglue.c6
-rw-r--r--drivers/usb/storage/unusual_cypress.h2
-rw-r--r--drivers/usb/storage/unusual_devs.h7
-rw-r--r--drivers/vfio/vfio_iommu_type1.c4
-rw-r--r--drivers/vhost/net.c47
-rw-r--r--drivers/vhost/scsi.c6
-rw-r--r--drivers/video/Kconfig2
-rw-r--r--drivers/video/exynos/Kconfig3
-rw-r--r--drivers/video/omap2/dss/dispc.c16
-rw-r--r--drivers/video/omap2/dss/dpi.c2
-rw-r--r--drivers/video/omap2/dss/sdi.c2
-rw-r--r--drivers/vme/bridges/vme_ca91cx42.c4
-rw-r--r--drivers/vme/bridges/vme_tsi148.c4
-rw-r--r--drivers/watchdog/Kconfig1
-rw-r--r--drivers/watchdog/w83697hf_wdt.c2
-rw-r--r--drivers/xen/Makefile1
-rw-r--r--drivers/xen/events/events_base.c2
-rw-r--r--drivers/xen/gntdev.c13
-rw-r--r--drivers/xen/grant-table.c89
-rw-r--r--drivers/xen/xencomm.c219
-rw-r--r--fs/bio-integrity.c18
-rw-r--r--fs/bio.c15
-rw-r--r--fs/btrfs/check-integrity.c4
-rw-r--r--fs/btrfs/compression.c2
-rw-r--r--fs/btrfs/disk-io.c5
-rw-r--r--fs/btrfs/extent-tree.c1
-rw-r--r--fs/btrfs/inode.c4
-rw-r--r--fs/btrfs/ioctl.c22
-rw-r--r--fs/btrfs/send.c22
-rw-r--r--fs/btrfs/super.c13
-rw-r--r--fs/btrfs/sysfs.c10
-rw-r--r--fs/buffer.c6
-rw-r--r--fs/ceph/acl.c11
-rw-r--r--fs/ceph/dir.c23
-rw-r--r--fs/ceph/file.c1
-rw-r--r--fs/ceph/super.c32
-rw-r--r--fs/ceph/super.h7
-rw-r--r--fs/ceph/xattr.c54
-rw-r--r--fs/cifs/cifsacl.c61
-rw-r--r--fs/cifs/cifsglob.h11
-rw-r--r--fs/cifs/cifsproto.h9
-rw-r--r--fs/cifs/cifssmb.c15
-rw-r--r--fs/cifs/dir.c2
-rw-r--r--fs/cifs/file.c74
-rw-r--r--fs/cifs/inode.c15
-rw-r--r--fs/cifs/smb1ops.c9
-rw-r--r--fs/cifs/smb2glob.h3
-rw-r--r--fs/cifs/smb2ops.c14
-rw-r--r--fs/cifs/smb2pdu.c9
-rw-r--r--fs/cifs/smb2proto.h3
-rw-r--r--fs/cifs/xattr.c15
-rw-r--r--fs/exec.c45
-rw-r--r--fs/ext4/ext4.h2
-rw-r--r--fs/ext4/extents.c1
-rw-r--r--fs/ext4/file.c2
-rw-r--r--fs/ext4/ioctl.c3
-rw-r--r--fs/ext4/resize.c34
-rw-r--r--fs/ext4/super.c20
-rw-r--r--fs/file.c2
-rw-r--r--fs/fs-writeback.c33
-rw-r--r--fs/fscache/object-list.c5
-rw-r--r--fs/fscache/object.c3
-rw-r--r--fs/hfsplus/options.c2
-rw-r--r--fs/jbd2/transaction.c6
-rw-r--r--fs/jfs/acl.c2
-rw-r--r--fs/jfs/xattr.c14
-rw-r--r--fs/kernfs/dir.c12
-rw-r--r--fs/kernfs/mount.c8
-rw-r--r--fs/lockd/svclock.c8
-rw-r--r--fs/namei.c30
-rw-r--r--fs/nfs/delegation.c11
-rw-r--r--fs/nfs/dir.c5
-rw-r--r--fs/nfs/inode.c14
-rw-r--r--fs/nfs/internal.h12
-rw-r--r--fs/nfs/nfs3acl.c34
-rw-r--r--fs/nfs/nfs3proc.c1
-rw-r--r--fs/nfs/nfs4client.c9
-rw-r--r--fs/nfs/nfs4filelayout.c10
-rw-r--r--fs/nfs/nfs4namespace.c12
-rw-r--r--fs/nfs/nfs4proc.c32
-rw-r--r--fs/nfs/nfs4session.c25
-rw-r--r--fs/nfs/nfs4session.h2
-rw-r--r--fs/nfs/nfs4state.c19
-rw-r--r--fs/nfsd/nfs4acl.c9
-rw-r--r--fs/notify/dnotify/dnotify.c2
-rw-r--r--fs/notify/fanotify/fanotify.c8
-rw-r--r--fs/notify/fanotify/fanotify_user.c13
-rw-r--r--fs/notify/fsnotify.c2
-rw-r--r--fs/notify/group.c8
-rw-r--r--fs/notify/inotify/inotify.h2
-rw-r--r--fs/notify/inotify/inotify_fsnotify.c3
-rw-r--r--fs/notify/inotify/inotify_user.c14
-rw-r--r--fs/notify/notification.c20
-rw-r--r--fs/ntfs/file.c2
-rw-r--r--fs/ocfs2/alloc.c40
-rw-r--r--fs/ocfs2/file.c52
-rw-r--r--fs/ocfs2/localalloc.c42
-rw-r--r--fs/ocfs2/localalloc.h6
-rw-r--r--fs/ocfs2/namei.c17
-rw-r--r--fs/ocfs2/quota_global.c27
-rw-r--r--fs/ocfs2/quota_local.c4
-rw-r--r--fs/posix_acl.c18
-rw-r--r--fs/proc/page.c5
-rw-r--r--fs/proc/vmcore.c26
-rw-r--r--fs/quota/dquot.c14
-rw-r--r--fs/reiserfs/do_balan.c895
-rw-r--r--fs/sync.c32
-rw-r--r--fs/sysfs/mount.c5
-rw-r--r--fs/udf/file.c14
-rw-r--r--fs/udf/inode.c1
-rw-r--r--fs/xfs/xfs_file.c2
-rw-r--r--fs/xfs/xfs_iops.c16
-rw-r--r--fs/xfs/xfs_log_cil.c19
-rw-r--r--fs/xfs/xfs_mount.c24
-rw-r--r--fs/xfs/xfs_sb.c10
-rw-r--r--fs/xfs/xfs_super.c2
-rw-r--r--include/asm-generic/pgtable.h39
-rw-r--r--include/drm/drmP.h3
-rw-r--r--include/drm/drm_crtc.h3
-rw-r--r--include/drm/ttm/ttm_page_alloc.h2
-rw-r--r--include/dt-bindings/clock/tegra124-car.h4
-rw-r--r--include/linux/binfmts.h1
-rw-r--r--include/linux/bio.h12
-rw-r--r--include/linux/blk-mq.h16
-rw-r--r--include/linux/blkdev.h11
-rw-r--r--include/linux/can/skb.h38
-rw-r--r--include/linux/ceph/ceph_fs.h5
-rw-r--r--include/linux/cgroup.h2
-rw-r--r--include/linux/clk/ti.h4
-rw-r--r--include/linux/compiler-gcc4.h6
-rw-r--r--include/linux/dma-buf.h2
-rw-r--r--include/linux/firewire.h1
-rw-r--r--include/linux/fs.h9
-rw-r--r--include/linux/fsnotify_backend.h4
-rw-r--r--include/linux/gpio/consumer.h4
-rw-r--r--include/linux/huge_mm.h41
-rw-r--r--include/linux/hyperv.h2
-rw-r--r--include/linux/interrupt.h5
-rw-r--r--include/linux/ipc_namespace.h2
-rw-r--r--include/linux/kernfs.h9
-rw-r--r--include/linux/mfd/max8997-private.h2
-rw-r--r--include/linux/mfd/max8998-private.h2
-rw-r--r--include/linux/mfd/tps65217.h4
-rw-r--r--include/linux/mlx5/driver.h3
-rw-r--r--include/linux/mm.h20
-rw-r--r--include/linux/netdevice.h36
-rw-r--r--include/linux/nfs_xdr.h7
-rw-r--r--include/linux/nvme.h6
-rw-r--r--include/linux/of.h153
-rw-r--r--include/linux/of_device.h4
-rw-r--r--include/linux/page-flags.h4
-rw-r--r--include/linux/pci.h20
-rw-r--r--include/linux/phy/phy.h14
-rw-r--r--include/linux/sched.h3
-rw-r--r--include/linux/skbuff.h22
-rw-r--r--include/linux/smp.h3
-rw-r--r--include/linux/spi/spi.h7
-rw-r--r--include/linux/syscalls.h6
-rw-r--r--include/linux/tracepoint.h6
-rw-r--r--include/linux/usb.h2
-rw-r--r--include/linux/vm_event_item.h4
-rw-r--r--include/linux/vmstat.h8
-rw-r--r--include/linux/workqueue.h5
-rw-r--r--include/linux/writeback.h2
-rw-r--r--include/net/datalink.h2
-rw-r--r--include/net/dn.h2
-rw-r--r--include/net/dn_route.h2
-rw-r--r--include/net/ethoc.h1
-rw-r--r--include/net/ip_tunnels.h1
-rw-r--r--include/net/ipx.h11
-rw-r--r--include/net/net_namespace.h8
-rw-r--r--include/net/netfilter/nf_conntrack.h2
-rw-r--r--include/net/netfilter/nf_tables.h9
-rw-r--r--include/net/netfilter/nft_reject.h25
-rw-r--r--include/net/sctp/structs.h14
-rw-r--r--include/net/tcp.h3
-rw-r--r--include/net/xfrm.h11
-rw-r--r--include/rdma/ib_verbs.h3
-rw-r--r--include/sound/soc-dapm.h8
-rw-r--r--include/target/iscsi/iscsi_transport.h1
-rw-r--r--include/target/target_core_base.h1
-rw-r--r--include/trace/events/power.h7
-rw-r--r--include/trace/events/sunrpc.h4
-rw-r--r--include/trace/events/writeback.h6
-rw-r--r--include/uapi/asm-generic/unistd.h6
-rw-r--r--include/uapi/drm/drm.h2
-rw-r--r--include/uapi/drm/vmwgfx_drm.h1
-rw-r--r--include/uapi/linux/btrfs.h1
-rw-r--r--include/uapi/linux/in6.h23
-rw-r--r--include/uapi/linux/mic_ioctl.h2
-rw-r--r--include/uapi/linux/nvme.h11
-rw-r--r--include/uapi/xen/Kbuild2
-rw-r--r--include/uapi/xen/gntalloc.h (renamed from include/xen/gntalloc.h)0
-rw-r--r--include/uapi/xen/gntdev.h (renamed from include/xen/gntdev.h)0
-rw-r--r--include/xen/grant_table.h8
-rw-r--r--include/xen/interface/io/blkif.h34
-rw-r--r--include/xen/interface/xencomm.h41
-rw-r--r--include/xen/xencomm.h77
-rw-r--r--init/main.c2
-rw-r--r--ipc/mq_sysctl.c18
-rw-r--r--ipc/mqueue.c6
-rw-r--r--kernel/audit_tree.c2
-rw-r--r--kernel/audit_watch.c2
-rw-r--r--kernel/auditsc.c2
-rw-r--r--kernel/cgroup.c60
-rw-r--r--kernel/cpuset.c10
-rw-r--r--kernel/events/core.c12
-rw-r--r--kernel/irq/Kconfig1
-rw-r--r--kernel/irq/devres.c45
-rw-r--r--kernel/irq/irqdesc.c1
-rw-r--r--kernel/irq/irqdomain.c1
-rw-r--r--kernel/irq/manage.c3
-rw-r--r--kernel/kmod.c2
-rw-r--r--kernel/power/console.c1
-rw-r--r--kernel/printk/printk.c2
-rw-r--r--kernel/sched/core.c28
-rw-r--r--kernel/sched/cpudeadline.c6
-rw-r--r--kernel/sched/deadline.c20
-rw-r--r--kernel/sched/fair.c10
-rw-r--r--kernel/sched/rt.c8
-rw-r--r--kernel/sched/sched.h1
-rw-r--r--kernel/time/jiffies.c6
-rw-r--r--kernel/time/sched_clock.c46
-rw-r--r--kernel/time/tick-broadcast.c1
-rw-r--r--kernel/trace/ring_buffer.c7
-rw-r--r--kernel/trace/trace_events.c10
-rw-r--r--kernel/tracepoint.c7
-rw-r--r--kernel/user_namespace.c2
-rw-r--r--kernel/workqueue.c7
-rw-r--r--lib/Kconfig.debug2
-rw-r--r--lib/Makefile1
-rw-r--r--lib/dma-debug.c131
-rw-r--r--lib/percpu_ida.c7
-rw-r--r--lib/radix-tree.c4
-rw-r--r--mm/filemap.c4
-rw-r--r--mm/huge_memory.c20
-rw-r--r--mm/ksm.c2
-rw-r--r--mm/memcontrol.c20
-rw-r--r--mm/memory-failure.c8
-rw-r--r--mm/memory.c15
-rw-r--r--mm/mprotect.c25
-rw-r--r--mm/page-writeback.c5
-rw-r--r--mm/page_alloc.c30
-rw-r--r--mm/slub.c38
-rw-r--r--mm/swap.c4
-rw-r--r--mm/swap_state.c63
-rw-r--r--mm/swapfile.c11
-rw-r--r--mm/vmpressure.c1
-rw-r--r--mm/vmstat.c4
-rw-r--r--net/9p/client.c2
-rw-r--r--net/9p/trans_virtio.c5
-rw-r--r--net/batman-adv/bat_iv_ogm.c30
-rw-r--r--net/batman-adv/hard-interface.c22
-rw-r--r--net/batman-adv/originator.c36
-rw-r--r--net/batman-adv/originator.h4
-rw-r--r--net/batman-adv/routing.c4
-rw-r--r--net/batman-adv/send.c9
-rw-r--r--net/batman-adv/translation-table.c23
-rw-r--r--net/bluetooth/hidp/core.c16
-rw-r--r--net/bluetooth/hidp/hidp.h4
-rw-r--r--net/bridge/br_device.c54
-rw-r--r--net/bridge/br_fdb.c137
-rw-r--r--net/bridge/br_if.c6
-rw-r--r--net/bridge/br_input.c4
-rw-r--r--net/bridge/br_private.h13
-rw-r--r--net/bridge/br_stp_if.c2
-rw-r--r--net/bridge/br_vlan.c27
-rw-r--r--net/caif/caif_dev.c1
-rw-r--r--net/caif/cfsrvl.c1
-rw-r--r--net/can/af_can.c3
-rw-r--r--net/can/bcm.c4
-rw-r--r--net/can/raw.c27
-rw-r--r--net/ceph/messenger.c8
-rw-r--r--net/ceph/osd_client.c84
-rw-r--r--net/core/dev.c28
-rw-r--r--net/core/fib_rules.c7
-rw-r--r--net/core/flow_dissector.c20
-rw-r--r--net/core/neighbour.c8
-rw-r--r--net/core/netpoll.c4
-rw-r--r--net/core/rtnetlink.c21
-rw-r--r--net/core/skbuff.c3
-rw-r--r--net/core/sock.c6
-rw-r--r--net/dccp/ccids/lib/tfrc.c2
-rw-r--r--net/dccp/ccids/lib/tfrc.h1
-rw-r--r--net/decnet/af_decnet.c5
-rw-r--r--net/hsr/hsr_framereg.c2
-rw-r--r--net/ieee802154/6lowpan.c23
-rw-r--r--net/ipv4/af_inet.c7
-rw-r--r--net/ipv4/devinet.c3
-rw-r--r--net/ipv4/ip_forward.c71
-rw-r--r--net/ipv4/ip_output.c3
-rw-r--r--net/ipv4/ip_tunnel.c82
-rw-r--r--net/ipv4/ip_tunnel_core.c47
-rw-r--r--net/ipv4/ipconfig.c2
-rw-r--r--net/ipv4/netfilter/Kconfig5
-rw-r--r--net/ipv4/netfilter/Makefile1
-rw-r--r--net/ipv4/netfilter/nf_nat_h323.c5
-rw-r--r--net/ipv4/netfilter/nf_nat_snmp_basic.c4
-rw-r--r--net/ipv4/netfilter/nft_reject_ipv4.c75
-rw-r--r--net/ipv4/route.c13
-rw-r--r--net/ipv4/tcp.c10
-rw-r--r--net/ipv4/tcp_cong.c3
-rw-r--r--net/ipv4/tcp_input.c21
-rw-r--r--net/ipv4/tcp_output.c37
-rw-r--r--net/ipv4/udp_offload.c17
-rw-r--r--net/ipv6/Kconfig1
-rw-r--r--net/ipv6/addrconf.c2
-rw-r--r--net/ipv6/exthdrs_core.c2
-rw-r--r--net/ipv6/icmp.c2
-rw-r--r--net/ipv6/ip6_offload.c20
-rw-r--r--net/ipv6/ip6_output.c20
-rw-r--r--net/ipv6/netfilter/Kconfig5
-rw-r--r--net/ipv6/netfilter/Makefile1
-rw-r--r--net/ipv6/netfilter/nft_reject_ipv6.c76
-rw-r--r--net/ipv6/ping.c1
-rw-r--r--net/ipv6/sit.c19
-rw-r--r--net/ipv6/udp_offload.c2
-rw-r--r--net/ipx/af_ipx.c22
-rw-r--r--net/ipx/ipx_route.c4
-rw-r--r--net/mac80211/cfg.c44
-rw-r--r--net/mac80211/ht.c4
-rw-r--r--net/mac80211/ibss.c5
-rw-r--r--net/mac80211/ieee80211_i.h10
-rw-r--r--net/mac80211/iface.c33
-rw-r--r--net/mac80211/mlme.c24
-rw-r--r--net/mac80211/rx.c7
-rw-r--r--net/mac80211/sta_info.c66
-rw-r--r--net/mac80211/sta_info.h7
-rw-r--r--net/mac80211/tx.c17
-rw-r--r--net/mac80211/util.c48
-rw-r--r--net/mac80211/wme.c5
-rw-r--r--net/netfilter/Kconfig6
-rw-r--r--net/netfilter/Makefile1
-rw-r--r--net/netfilter/ipvs/ip_vs_conn.c8
-rw-r--r--net/netfilter/nf_conntrack_core.c55
-rw-r--r--net/netfilter/nf_conntrack_netlink.c35
-rw-r--r--net/netfilter/nf_nat_core.c56
-rw-r--r--net/netfilter/nf_synproxy_core.c5
-rw-r--r--net/netfilter/nf_tables_api.c82
-rw-r--r--net/netfilter/nf_tables_core.c6
-rw-r--r--net/netfilter/nft_ct.c16
-rw-r--r--net/netfilter/nft_log.c5
-rw-r--r--net/netfilter/nft_lookup.c1
-rw-r--r--net/netfilter/nft_meta.c4
-rw-r--r--net/netfilter/nft_payload.c3
-rw-r--r--net/netfilter/nft_queue.c4
-rw-r--r--net/netfilter/nft_rbtree.c16
-rw-r--r--net/netfilter/nft_reject.c89
-rw-r--r--net/netfilter/nft_reject_inet.c63
-rw-r--r--net/netfilter/xt_CT.c7
-rw-r--r--net/netlink/af_netlink.c4
-rw-r--r--net/nfc/nci/core.c2
-rw-r--r--net/openvswitch/datapath.c23
-rw-r--r--net/openvswitch/flow_table.c88
-rw-r--r--net/openvswitch/flow_table.h2
-rw-r--r--net/packet/af_packet.c26
-rw-r--r--net/sched/sch_pie.c21
-rw-r--r--net/sched/sch_tbf.c24
-rw-r--r--net/sctp/associola.c211
-rw-r--r--net/sctp/ipv6.c2
-rw-r--r--net/sctp/sm_sideeffect.c7
-rw-r--r--net/sctp/sm_statefuns.c9
-rw-r--r--net/sctp/socket.c47
-rw-r--r--net/sctp/sysctl.c18
-rw-r--r--net/sctp/ulpevent.c8
-rw-r--r--net/sunrpc/auth_gss/auth_gss.c19
-rw-r--r--net/sunrpc/backchannel_rqst.c6
-rw-r--r--net/sunrpc/svc_xprt.c6
-rw-r--r--net/sunrpc/xprtsock.c6
-rw-r--r--net/tipc/bearer.c7
-rw-r--r--net/tipc/config.c2
-rw-r--r--net/tipc/core.c109
-rw-r--r--net/tipc/core.h2
-rw-r--r--net/tipc/link.c7
-rw-r--r--net/tipc/name_table.c3
-rw-r--r--net/tipc/netlink.c8
-rw-r--r--net/tipc/ref.c3
-rw-r--r--net/tipc/server.c5
-rw-r--r--net/tipc/server.h2
-rw-r--r--net/tipc/socket.c8
-rw-r--r--net/wireless/core.c17
-rw-r--r--net/wireless/core.h4
-rw-r--r--net/wireless/nl80211.c32
-rw-r--r--net/wireless/nl80211.h8
-rw-r--r--net/wireless/reg.c12
-rw-r--r--net/wireless/scan.c40
-rw-r--r--net/wireless/sme.c2
-rw-r--r--net/xfrm/xfrm_policy.c2
-rw-r--r--net/xfrm/xfrm_state.c23
-rw-r--r--net/xfrm/xfrm_user.c5
-rw-r--r--scripts/Makefile.lib1
-rwxr-xr-xscripts/checkpatch.pl4
-rw-r--r--scripts/gen_initramfs_list.sh2
-rwxr-xr-xscripts/get_maintainer.pl2
-rw-r--r--scripts/kallsyms.c3
-rw-r--r--scripts/mod/file2alias.c4
-rw-r--r--scripts/mod/modpost.c13
-rw-r--r--security/Kconfig2
-rw-r--r--security/keys/keyring.c6
-rw-r--r--security/selinux/nlmsgtab.c2
-rw-r--r--security/selinux/ss/policydb.c8
-rw-r--r--security/selinux/ss/services.c4
-rw-r--r--sound/pci/hda/hda_codec.c34
-rw-r--r--sound/pci/hda/hda_generic.c8
-rw-r--r--sound/pci/hda/hda_generic.h1
-rw-r--r--sound/pci/hda/hda_intel.c2
-rw-r--r--sound/pci/hda/patch_analog.c31
-rw-r--r--sound/pci/hda/patch_ca0132.c68
-rw-r--r--sound/pci/hda/patch_conexant.c3
-rw-r--r--sound/pci/hda/patch_realtek.c73
-rw-r--r--sound/pci/hda/patch_sigmatel.c60
-rw-r--r--sound/pci/hda/thinkpad_helper.c1
-rw-r--r--sound/soc/blackfin/Kconfig11
-rw-r--r--sound/soc/codecs/88pm860x-codec.c3
-rw-r--r--sound/soc/codecs/ad1980.c4
-rw-r--r--sound/soc/codecs/da732x.c12
-rw-r--r--sound/soc/codecs/da9055.c11
-rw-r--r--sound/soc/codecs/isabelle.c52
-rw-r--r--sound/soc/codecs/max98090.c21
-rw-r--r--sound/soc/codecs/rt5640.c1
-rw-r--r--sound/soc/codecs/sta32x.c76
-rw-r--r--sound/soc/codecs/wm8400.c34
-rw-r--r--sound/soc/codecs/wm8770.c4
-rw-r--r--sound/soc/codecs/wm8900.c44
-rw-r--r--sound/soc/codecs/wm8958-dsp2.c2
-rw-r--r--sound/soc/codecs/wm8993.c1
-rw-r--r--sound/soc/codecs/wm8994.c135
-rw-r--r--sound/soc/davinci/davinci-evm.c1
-rw-r--r--sound/soc/davinci/davinci-mcasp.c83
-rw-r--r--sound/soc/fsl/fsl_esai.c4
-rw-r--r--sound/soc/fsl/fsl_esai.h2
-rw-r--r--sound/soc/fsl/imx-mc13783.c1
-rw-r--r--sound/soc/fsl/imx-sgtl5000.c10
-rw-r--r--sound/soc/fsl/imx-wm8962.c11
-rw-r--r--sound/soc/omap/n810.c4
-rw-r--r--sound/soc/samsung/Kconfig6
-rw-r--r--sound/soc/soc-dapm.c139
-rw-r--r--sound/soc/soc-pcm.c3
-rw-r--r--sound/soc/txx9/txx9aclc-ac97.c8
-rw-r--r--sound/usb/Kconfig1
-rw-r--r--sound/usb/mixer.c1
-rw-r--r--sound/usb/mixer_maps.c9
-rw-r--r--tools/lib/lockdep/Makefile6
-rw-r--r--tools/lib/lockdep/preload.c2
-rwxr-xr-x[-rw-r--r--]tools/lib/lockdep/run_tests.sh0
-rw-r--r--tools/lib/lockdep/uinclude/asm/hash.h6
-rw-r--r--tools/lib/lockdep/uinclude/linux/rcu.h5
-rw-r--r--tools/perf/builtin-buildid-cache.c33
-rw-r--r--tools/perf/builtin-record.c10
-rw-r--r--tools/perf/builtin-report.c40
-rw-r--r--tools/perf/builtin-top.c6
-rw-r--r--tools/perf/builtin-trace.c22
-rw-r--r--tools/perf/config/Makefile2
-rw-r--r--tools/perf/config/feature-checks/Makefile2
-rw-r--r--tools/perf/design.txt1
-rw-r--r--tools/perf/perf.h4
-rw-r--r--tools/perf/tests/vmlinux-kallsyms.c10
-rw-r--r--tools/perf/util/annotate.c9
-rw-r--r--tools/perf/util/annotate.h2
-rw-r--r--tools/perf/util/event.c36
-rw-r--r--tools/perf/util/event.h6
-rw-r--r--tools/perf/util/include/asm/hash.h6
-rw-r--r--tools/perf/util/include/linux/bitops.h4
-rw-r--r--tools/perf/util/machine.c42
-rw-r--r--tools/perf/util/machine.h2
-rw-r--r--tools/perf/util/map.c5
-rw-r--r--tools/perf/util/map.h1
-rw-r--r--tools/perf/util/parse-events.c17
-rw-r--r--tools/perf/util/probe-event.c2
-rw-r--r--tools/perf/util/session.c6
-rw-r--r--tools/perf/util/symbol-elf.c4
-rw-r--r--tools/perf/util/symbol.c67
-rw-r--r--virt/kvm/arm/vgic.c1
-rw-r--r--virt/kvm/coalesced_mmio.c8
1432 files changed, 17382 insertions, 8923 deletions
diff --git a/.gitignore b/.gitignore
index 7e9932e55475..42fa0d5626a9 100644
--- a/.gitignore
+++ b/.gitignore
@@ -92,3 +92,6 @@ extra_certificates
signing_key.priv
signing_key.x509
x509.genkey
+
+# Kconfig presets
+all.config
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 38f8444bdd0e..07de7e19b4ce 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -29,6 +29,8 @@ DMA-ISA-LPC.txt
- How to do DMA with ISA (and LPC) devices.
DMA-attributes.txt
- listing of the various possible attributes a DMA region can have
+dmatest.txt
+ - how to compile, configure and use the dmatest system.
DocBook/
- directory with DocBook templates etc. for kernel documentation.
EDID/
@@ -77,6 +79,8 @@ arm/
- directory with info about Linux on the ARM architecture.
arm64/
- directory with info about Linux on the 64 bit ARM architecture.
+assoc_array.txt
+ - generic associative array intro.
atomic_ops.txt
- semantics and behavior of atomic and bitmask operations.
auxdisplay/
@@ -87,6 +91,8 @@ bad_memory.txt
- how to use kernel parameters to exclude bad RAM regions.
basic_profiling.txt
- basic instructions for those who wants to profile Linux kernel.
+bcache.txt
+ - Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
binfmt_misc.txt
- info on the kernel support for extra binary formats.
blackfin/
@@ -171,6 +177,8 @@ early-userspace/
- info about initramfs, klibc, and userspace early during boot.
edac.txt
- information on EDAC - Error Detection And Correction
+efi-stub.txt
+ - How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
eisa.txt
- info on EISA bus support.
email-clients.txt
@@ -195,8 +203,8 @@ futex-requeue-pi.txt
- info on requeueing of tasks from a non-PI futex to a PI futex
gcov.txt
- use of GCC's coverage testing tool "gcov" with the Linux kernel
-gpio.txt
- - overview of GPIO (General Purpose Input/Output) access conventions.
+gpio/
+ - gpio related documentation
hid/
- directory with information on human interface devices
highuid.txt
@@ -255,6 +263,8 @@ kernel-docs.txt
- listing of various WWW + books that document kernel internals.
kernel-parameters.txt
- summary listing of command line / boot prompt args for the kernel.
+kernel-per-CPU-kthreads.txt
+ - List of all per-CPU kthreads and how they introduce jitter.
kmemcheck.txt
- info on dynamic checker that detects uses of uninitialized memory.
kmemleak.txt
@@ -299,8 +309,6 @@ memory-devices/
- directory with info on parts like the Texas Instruments EMIF driver
memory-hotplug.txt
- Hotpluggable memory support, how to use and current status.
-memory.txt
- - info on typical Linux memory problems.
metag/
- directory with info about Linux on Meta architecture.
mips/
@@ -311,6 +319,8 @@ mmc/
- directory with info about the MMC subsystem
mn10300/
- directory with info about the mn10300 architecture port
+module-signing.txt
+ - Kernel module signing for increased security when loading modules.
mtd/
- directory with info about memory technology devices (flash)
mono.txt
@@ -343,6 +353,8 @@ pcmcia/
- info on the Linux PCMCIA driver.
percpu-rw-semaphore.txt
- RCU based read-write semaphore optimized for locking for reading
+phy.txt
+ - Description of the generic PHY framework.
pi-futex.txt
- documentation on lightweight priority inheritance futexes.
pinctrl.txt
@@ -431,6 +443,8 @@ sysrq.txt
- info on the magic SysRq key.
target/
- directory with info on generating TCM v4 fabric .ko modules
+this_cpu_ops.txt
+ - List rationale behind and the way to use this_cpu operations.
thermal/
- directory with information on managing thermal issues (CPU/temp)
trace/
@@ -469,6 +483,8 @@ wimax/
- directory with info about Intel Wireless Wimax Connections
workqueue.txt
- information on the Concurrency Managed Workqueue implementation
+ww-mutex-design.txt
+ - Intro to Mutex wait/would deadlock handling.s
x86/x86_64/
- directory with info on Linux support for AMD x86-64 (Hammer) machines.
xtensa/
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index a8d01005f480..10a93696e55a 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -82,7 +82,19 @@ Most of the hard work is done for the driver in the PCI layer. It simply
has to request that the PCI layer set up the MSI capability for this
device.
-4.2.1 pci_enable_msi_range
+4.2.1 pci_enable_msi
+
+int pci_enable_msi(struct pci_dev *dev)
+
+A successful call allocates ONE interrupt to the device, regardless
+of how many MSIs the device supports. The device is switched from
+pin-based interrupt mode to MSI mode. The dev->irq number is changed
+to a new number which represents the message signaled interrupt;
+consequently, this function should be called before the driver calls
+request_irq(), because an MSI is delivered via a vector that is
+different from the vector of a pin-based interrupt.
+
+4.2.2 pci_enable_msi_range
int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
@@ -147,6 +159,11 @@ static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
return pci_enable_msi_range(pdev, nvec, nvec);
}
+Note, unlike pci_enable_msi_exact() function, which could be also used to
+enable a particular number of MSI-X interrupts, pci_enable_msi_range()
+returns either a negative errno or 'nvec' (not negative errno or 0 - as
+pci_enable_msi_exact() does).
+
4.2.1.3 Single MSI mode
The most notorious example of the request type described above is
@@ -158,7 +175,27 @@ static int foo_driver_enable_single_msi(struct pci_dev *pdev)
return pci_enable_msi_range(pdev, 1, 1);
}
-4.2.2 pci_disable_msi
+Note, unlike pci_enable_msi() function, which could be also used to
+enable the single MSI mode, pci_enable_msi_range() returns either a
+negative errno or 1 (not negative errno or 0 - as pci_enable_msi()
+does).
+
+4.2.3 pci_enable_msi_exact
+
+int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
+
+This variation on pci_enable_msi_range() call allows a device driver to
+request exactly 'nvec' MSIs.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
+
+By contrast with pci_enable_msi_range() function, pci_enable_msi_exact()
+returns zero in case of success, which indicates MSI interrupts have been
+successfully allocated.
+
+4.2.4 pci_disable_msi
void pci_disable_msi(struct pci_dev *dev)
@@ -172,7 +209,7 @@ on any interrupt for which it previously called request_irq().
Failure to do so results in a BUG_ON(), leaving the device with
MSI enabled and thus leaking its vector.
-4.2.3 pci_msi_vec_count
+4.2.4 pci_msi_vec_count
int pci_msi_vec_count(struct pci_dev *dev)
@@ -257,8 +294,8 @@ possible, likely up to the limit returned by pci_msix_vec_count() function:
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
- return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
- 1, nvec);
+ return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+ 1, nvec);
}
Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive,
@@ -269,8 +306,8 @@ In this case the function could look like this:
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
- return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
- FOO_DRIVER_MINIMUM_NVEC, nvec);
+ return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+ FOO_DRIVER_MINIMUM_NVEC, nvec);
}
4.3.1.2 Exact number of MSI-X interrupts
@@ -282,10 +319,15 @@ parameters:
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
- return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
- nvec, nvec);
+ return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+ nvec, nvec);
}
+Note, unlike pci_enable_msix_exact() function, which could be also used to
+enable a particular number of MSI-X interrupts, pci_enable_msix_range()
+returns either a negative errno or 'nvec' (not negative errno or 0 - as
+pci_enable_msix_exact() does).
+
4.3.1.3 Specific requirements to the number of MSI-X interrupts
As noted above, there could be devices that can not operate with just any
@@ -332,7 +374,64 @@ Note how pci_enable_msix_range() return value is analized for a fallback -
any error code other than -ENOSPC indicates a fatal error and should not
be retried.
-4.3.2 pci_disable_msix
+4.3.2 pci_enable_msix_exact
+
+int pci_enable_msix_exact(struct pci_dev *dev,
+ struct msix_entry *entries, int nvec)
+
+This variation on pci_enable_msix_range() call allows a device driver to
+request exactly 'nvec' MSI-Xs.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to allocate any more MSI-X interrupts for
+this device.
+
+By contrast with pci_enable_msix_range() function, pci_enable_msix_exact()
+returns zero in case of success, which indicates MSI-X interrupts have been
+successfully allocated.
+
+Another version of a routine that enables MSI-X mode for a device with
+specific requirements described in chapter 4.3.1.3 might look like this:
+
+/*
+ * Assume 'minvec' and 'maxvec' are non-zero
+ */
+static int foo_driver_enable_msix(struct foo_adapter *adapter,
+ int minvec, int maxvec)
+{
+ int rc;
+
+ minvec = roundup_pow_of_two(minvec);
+ maxvec = rounddown_pow_of_two(maxvec);
+
+ if (minvec > maxvec)
+ return -ERANGE;
+
+retry:
+ rc = pci_enable_msix_exact(adapter->pdev,
+ adapter->msix_entries, maxvec);
+
+ /*
+ * -ENOSPC is the only error code allowed to be analyzed
+ */
+ if (rc == -ENOSPC) {
+ if (maxvec == 1)
+ return -ENOSPC;
+
+ maxvec /= 2;
+
+ if (minvec > maxvec)
+ return -ENOSPC;
+
+ goto retry;
+ } else if (rc < 0) {
+ return rc;
+ }
+
+ return maxvec;
+}
+
+4.3.3 pci_disable_msix
void pci_disable_msix(struct pci_dev *dev)
diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX
index 1d7a885761f5..fa57139f50bf 100644
--- a/Documentation/RCU/00-INDEX
+++ b/Documentation/RCU/00-INDEX
@@ -8,6 +8,8 @@ listRCU.txt
- Using RCU to Protect Read-Mostly Linked Lists
lockdep.txt
- RCU and lockdep checking
+lockdep-splat.txt
+ - RCU Lockdep splats explained.
NMI-RCU.txt
- Using RCU to Protect Dynamic NMI Handlers
rcubarrier.txt
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 36420e116c90..a94090cc785d 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -4,6 +4,8 @@ Booting
- requirements for booting
Interrupts
- ARM Interrupt subsystem documentation
+IXP4xx
+ - Intel IXP4xx Network processor.
msm
- MSM specific documentation
Netwinder
@@ -24,8 +26,16 @@ SPEAr
- ST SPEAr platform Linux Overview
VFP/
- Release notes for Linux Kernel Vector Floating Point support code
+cluster-pm-race-avoidance.txt
+ - Algorithm for CPU and Cluster setup/teardown
empeg/
- Ltd's Empeg MP3 Car Audio Player
+firmware.txt
+ - Secure firmware registration and calling.
+kernel_mode_neon.txt
+ - How to use NEON instructions in kernel mode
+kernel_user_helpers.txt
+ - Helper functions in kernel space made available for userspace.
mem_alignment
- alignment abort handler documentation
memory.txt
@@ -34,3 +44,7 @@ nwfpe/
- NWFPE floating point emulator documentation
swp_emulation
- SWP/SWPB emulation handler/logging description
+tcm.txt
+ - ARM Tightly Coupled Memory
+vlocks.txt
+ - Voting locks, low-level mechanism relying on memory system atomic writes.
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
index 2df0365f2dff..c54fcdd4ae9f 100644
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@@ -1,8 +1,10 @@
00-INDEX
- This file
-
+Makefile
+ - Makefile for gptimers example file.
bfin-gpio-notes.txt
- Notes in developing/using bfin-gpio driver.
-
bfin-spi-notes.txt
- Notes for using bfin spi bus driver.
+gptimers-example.c
+ - gptimers example
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX
index 929d9904f74b..e840b47613f7 100644
--- a/Documentation/block/00-INDEX
+++ b/Documentation/block/00-INDEX
@@ -14,6 +14,8 @@ deadline-iosched.txt
- Deadline IO scheduler tunables
ioprio.txt
- Block io priorities (in CFQ scheduler)
+null_blk.txt
+ - Null block for block-layer benchmarking.
queue-sysfs.txt
- Queue's sysfs entries
request.txt
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index e6b72d355151..68c0f517c60e 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -124,12 +124,11 @@ the default being 204800 sectors (or 100MB).
Updating on-disk metadata
-------------------------
-On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
-written. If no such requests are made then commits will occur every
-second. This means the cache behaves like a physical disk that has a
-write cache (the same is true of the thin-provisioning target). If
-power is lost you may lose some recent writes. The metadata should
-always be consistent in spite of any crash.
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second. This
+means the cache behaves like a physical disk that has a volatile write
+cache. If power is lost you may lose some recent writes. The metadata
+should always be consistent in spite of any crash.
The 'dirty' state for a cache block changes far too frequently for us
to keep updating it on the fly. So we treat it as a hint. In normal
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 8a7a3d46e0da..05a27e9442bd 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -116,6 +116,35 @@ Resuming a device with a new table itself triggers an event so the
userspace daemon can use this to detect a situation where a new table
already exceeds the threshold.
+A low water mark for the metadata device is maintained in the kernel and
+will trigger a dm event if free space on the metadata device drops below
+it.
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second. This
+means the thin-provisioning target behaves like a physical disk that has
+a volatile write cache. If power is lost you may lose some recent
+writes. The metadata should always be consistent in spite of any crash.
+
+If data space is exhausted the pool will either error or queue IO
+according to the configuration (see: error_if_no_space). If metadata
+space is exhausted or a metadata operation fails: the pool will error IO
+until the pool is taken offline and repair is performed to 1) fix any
+potential inconsistencies and 2) clear the flag that imposes repair.
+Once the pool's metadata device is repaired it may be resized, which
+will allow the pool to return to normal operation. Note that if a pool
+is flagged as needing repair, the pool's data and metadata devices
+cannot be resized until repair is performed. It should also be noted
+that when the pool's metadata space is exhausted the current metadata
+transaction is aborted. Given that the pool will cache IO whose
+completion may have already been acknowledged to upper IO layers
+(e.g. filesystem) it is strongly suggested that consistency checks
+(e.g. fsck) be performed on those layers when repair of the pool is
+required.
+
Thin provisioning
-----------------
@@ -258,10 +287,9 @@ ii) Status
should register for the event and then check the target's status.
held metadata root:
- The location, in sectors, of the metadata root that has been
+ The location, in blocks, of the metadata root that has been
'held' for userspace read access. '-' indicates there is no
- held root. This feature is not yet implemented so '-' is
- always returned.
+ held root.
discard_passdown|no_discard_passdown
Whether or not discards are actually being passed down to the
diff --git a/Documentation/devicetree/00-INDEX b/Documentation/devicetree/00-INDEX
index b78f691fd847..8c4102c6a5e7 100644
--- a/Documentation/devicetree/00-INDEX
+++ b/Documentation/devicetree/00-INDEX
@@ -8,3 +8,5 @@ https://lists.ozlabs.org/listinfo/devicetree-discuss
- this file
booting-without-of.txt
- Booting Linux without Open Firmware, describes history and format of device trees.
+usage-model.txt
+ - How Linux uses DT and what DT aims to solve. \ No newline at end of file
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 34dc40cffdfd..af9b4a0d902b 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -91,7 +91,7 @@ Boards:
compatible = "ti,omap3-beagle", "ti,omap3"
- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
- compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
- OMAP4 SDP : Software Development Board
compatible = "ti,omap4-sdp", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
index a6a352c2771e..5992dceec7af 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -21,9 +21,9 @@ Required Properties:
must appear in the same order as the output clocks.
- #clock-cells: Must be 1
- clock-output-names: The name of the clocks as free-form strings
- - renesas,indices: Indices of the gate clocks into the group (0 to 31)
+ - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31)
-The clocks, clock-output-names and renesas,indices properties contain one
+The clocks, clock-output-names and renesas,clock-indices properties contain one
entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
gate clocks must not be declared.
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 68b83ecc3850..ee9be9961524 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -1,12 +1,16 @@
* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
Required properties:
-- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma",
- "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma",
- "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or
- "fsl,imx6q-sdma". The -to variants should be preferred since they
- allow to determnine the correct ROM script addresses needed for
- the driver to work without additional firmware.
+- compatible : Should be one of
+ "fsl,imx25-sdma"
+ "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
+ "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
+ "fsl,imx51-sdma"
+ "fsl,imx53-sdma"
+ "fsl,imx6q-sdma"
+ The -to variants should be preferred since they allow to determnine the
+ correct ROM script addresses needed for the driver to work without additional
+ firmware.
- reg : Should contain SDMA registers location and length
- interrupts : Should contain SDMA interrupt
- #dma-cells : Must be <3>.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
new file mode 100644
index 000000000000..aee38e7c13e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
@@ -0,0 +1,18 @@
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+ compatible = "lsi,zevio-intc";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
index 0a85c70cd30a..07ad02075a93 100644
--- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
+++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
@@ -13,6 +13,9 @@ Required properties:
- #address-cells: should be one. The cell is the slot id.
- #size-cells: should be zero.
- at least one slot node
+- clock-names: tuple listing input clock names.
+ Required elements: "mci_clk"
+- clocks: phandles to input clocks.
The node contains child nodes for each slot that the platform uses
@@ -24,6 +27,8 @@ mmc0: mmc@f0008000 {
interrupts = <12 4>;
#address-cells = <1>;
#size-cells = <0>;
+ clock-names = "mci_clk";
+ clocks = <&mci0_clk>;
[ child node definitions...]
};
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
index b90bfcd138ff..863d5b8155c7 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
@@ -1,7 +1,8 @@
* Allwinner EMAC ethernet controller
Required properties:
-- compatible: should be "allwinner,sun4i-emac".
+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
+ "allwinner,sun4i-emac")
- reg: address and length of the register set for the device.
- interrupts: interrupt for the device
- phy: A phandle to a phy node defining the PHY address (as the reg
@@ -14,7 +15,7 @@ Optional properties:
Example:
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
index 00b9f9a3ec1d..4ec56413779d 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
@@ -1,7 +1,8 @@
* Allwinner A10 MDIO Ethernet Controller interface
Required properties:
-- compatible: should be "allwinner,sun4i-mdio".
+- compatible: should be "allwinner,sun4i-a10-mdio"
+ (Deprecated: "allwinner,sun4i-mdio").
- reg: address and length of the register set for the device.
Optional properties:
@@ -9,7 +10,7 @@ Optional properties:
Example at the SoC level:
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/opencores-ethoc.txt b/Documentation/devicetree/bindings/net/opencores-ethoc.txt
new file mode 100644
index 000000000000..2dc127c30d9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/opencores-ethoc.txt
@@ -0,0 +1,22 @@
+* OpenCores MAC 10/100 Mbps
+
+Required properties:
+- compatible: Should be "opencores,ethoc".
+- reg: two memory regions (address and length),
+ first region is for the device registers and descriptor rings,
+ second is for the device packet memory.
+- interrupts: interrupt for the device.
+
+Optional properties:
+- clocks: phandle to refer to the clk used as per
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Examples:
+
+ enet0: ethoc@fd030000 {
+ compatible = "opencores,ethoc";
+ reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
+ interrupts = <1>;
+ local-mac-address = [00 50 c2 13 6f 00];
+ clocks = <&osc>;
+ };
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
new file mode 100644
index 000000000000..3dd3d0bf112f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -0,0 +1,58 @@
+STMicroelectronics SoC DWMAC glue layer controller
+
+The device node has following properties.
+
+Required properties:
+ - compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac" or
+ "st,stid127-dwmac".
+ - reg : Offset of the glue configuration register map in system
+ configuration regmap pointed by st,syscon property and size.
+
+ - reg-names : Should be "sti-ethconf".
+
+ - st,syscon : Should be phandle to system configuration node which
+ encompases this glue registers.
+
+ - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be
+ wired up in from different sources. One via TXCLK pin and other via CLK_125
+ pin. This wiring is totally board dependent. However the retiming glue
+ logic should be configured accordingly. Possible values for this property
+
+ "txclk" - if 125Mhz clock is wired up via txclk line.
+ "clk_125" - if 125Mhz clock is wired up via clk_125 line.
+
+ This property is only valid for Giga bit setup( GMII, RGMII), and it is
+ un-used for non-giga bit (MII and RMII) setups. Also note that internal
+ clockgen can not generate stable 125Mhz clock.
+
+ - st,ext-phyclk: This boolean property indicates who is generating the clock
+ for tx and rx. This property is only valid for RMII case where the clock can
+ be generated from the MAC or PHY.
+
+ - clock-names: should be "sti-ethclk".
+ - clocks: Should point to ethernet clockgen which can generate phyclk.
+
+
+Example:
+
+ethernet0: dwmac@fe810000 {
+ device_type = "network";
+ compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+ reg = <0xfe810000 0x8000>, <0x8bc 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+ interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ phy-mode = "mii";
+
+ st,syscon = <&syscfg_rear>;
+
+ snps,pbl = <32>;
+ snps,mixed-burst;
+
+ resets = <&softreset STIH416_ETH0_SOFTRESET>;
+ reset-names = "stmmaceth";
+ pinctrl-0 = <&pinctrl_mii0>;
+ pinctrl-names = "default";
+ clocks = <&CLK_S_GMAC0_PHY>;
+ clock-names = "stmmaceth";
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
index 9e9e9ef9f852..c119debe6bab 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
@@ -1,4 +1,4 @@
-Broadcom Capri Pin Controller
+Broadcom BCM281xx Pin Controller
This is a pin controller for the Broadcom BCM281xx SoC family, which includes
BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
@@ -7,14 +7,14 @@ BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
Required Properties:
-- compatible: Must be "brcm,capri-pinctrl".
+- compatible: Must be "brcm,bcm11351-pinctrl"
- reg: Base address of the PAD Controller register block and the size
of the block.
For example, the following is the bare minimum node:
pinctrl@35004800 {
- compatible = "brcm,capri-pinctrl";
+ compatible = "brcm,bcm11351-pinctrl";
reg = <0x35004800 0x430>;
};
@@ -119,7 +119,7 @@ Optional Properties (for HDMI pins):
Example:
// pin controller node
pinctrl@35004800 {
- compatible = "brcm,capri-pinctrl";
+ compatible = "brcmbcm11351-pinctrl";
reg = <0x35004800 0x430>;
// pin configuration node
diff --git a/Documentation/devicetree/bindings/power/bq2415x.txt b/Documentation/devicetree/bindings/power/bq2415x.txt
new file mode 100644
index 000000000000..d0327f0b59ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq2415x.txt
@@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg: integer, i2c address of the device.
+- ti,current-limit: integer, initial maximum current charger can pull
+ from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+ The chip will use slow precharge if battery voltage
+ is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current: integer, maximum charging current in mA.
+- ti,termination-current: integer, charge will be terminated when current in
+ constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense: integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+ (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1704>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 07e04cdc0c9e..4f8184d069cb 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -5,6 +5,9 @@ Required properties:
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
- cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+ Required elements: "spi_clk"
+- clocks: phandles to input clocks.
Example:
@@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
interrupts = <13 4 5>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
status = "okay";
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3f900cd51bf0..40ce2df0e0e9 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -8,6 +8,7 @@ ad Avionic Design GmbH
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
+allwinner Allwinner Technology Co., Ltd.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amstaos AMS-Taos Inc.
@@ -40,6 +41,7 @@ gmt Global Mixed-mode Technology, Inc.
gumstix Gumstix, Inc.
haoyu Haoyu Microelectronic Co. Ltd.
hisilicon Hisilicon Limited.
+honeywell Honeywell
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
@@ -55,6 +57,7 @@ maxim Maxim Integrated Products
microchip Microchip Technology Inc.
mosaixtech Mosaix Technologies, Inc.
national National Semiconductor
+neonode Neonode Inc.
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
@@ -64,7 +67,7 @@ phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
-qcom Qualcomm, Inc.
+qcom Qualcomm Technologies, Inc
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
@@ -78,6 +81,7 @@ silabs Silicon Laboratories
simtek
sirf SiRF Technology, Inc.
snps Synopsys, Inc.
+spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt
index 47c30098dab6..731a009723c7 100644
--- a/Documentation/dvb/contributors.txt
+++ b/Documentation/dvb/contributors.txt
@@ -78,7 +78,7 @@ Peter Beutner <p.beutner@gmx.net>
Wilson Michaels <wilsonmichaels@earthlink.net>
for the lgdt330x frontend driver, and various bugfixes
-Michael Krufky <mkrufky@m1k.net>
+Michael Krufky <mkrufky@linuxtv.org>
for maintaining v4l/dvb inter-tree dependencies
Taylor Jacob <rtjacob@earthlink.net>
diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX
index 30a70542e823..fe85e7c5907a 100644
--- a/Documentation/fb/00-INDEX
+++ b/Documentation/fb/00-INDEX
@@ -5,6 +5,8 @@ please mail me.
00-INDEX
- this file.
+api.txt
+ - The frame buffer API between applications and buffer devices.
arkfb.txt
- info on the fbdev driver for ARK Logic chips.
aty128fb.txt
@@ -51,12 +53,16 @@ sh7760fb.txt
- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
sisfb.txt
- info on the framebuffer device driver for various SiS chips.
+sm501.txt
+ - info on the framebuffer device driver for sm501 videoframebuffer.
sstfb.txt
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
tgafb.txt
- info on the TGA (DECChip 21030) frame buffer driver.
tridentfb.txt
info on the framebuffer driver for some Trident chip based cards.
+udlfb.txt
+ - Driver for DisplayLink USB 2.0 chips.
uvesafb.txt
- info on the userspace VESA (VBE2+ compliant) frame buffer device.
vesafb.txt
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 632211cbdd56..ac28149aede4 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -2,6 +2,8 @@
- this file (info on some of the filesystems supported by linux).
Locking
- info on locking rules as they pertain to Linux VFS.
+Makefile
+ - Makefile for building the filsystems-part of DocBook.
9p.txt
- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
adfs.txt
diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX
index 66eb6c8c5334..53f3b596ac0d 100644
--- a/Documentation/filesystems/nfs/00-INDEX
+++ b/Documentation/filesystems/nfs/00-INDEX
@@ -12,6 +12,8 @@ nfs41-server.txt
- info on the Linux server implementation of NFSv4 minor version 1.
nfs-rdma.txt
- how to install and setup the Linux NFS/RDMA client and server software
+nfsd-admin-interfaces.txt
+ - Administrative interfaces for nfsd.
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
pnfs.txt
@@ -20,5 +22,5 @@ rpc-cache.txt
- introduction to the caching mechanisms in the sunrpc layer.
idmapper.txt
- information for configuring request-keys to be used by idmapper
-knfsd-rpcgss.txt
+rpc-server-gss.txt
- Information on GSS authentication support in the NFS Server
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c70e7a7638d1..0d85ac1935b7 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -8,8 +8,8 @@ reason, the kernel code must instantiate I2C devices explicitly. There are
several ways to achieve this, depending on the context and requirements.
-Method 1: Declare the I2C devices by bus number
------------------------------------------------
+Method 1a: Declare the I2C devices by bus number
+------------------------------------------------
This method is appropriate when the I2C bus is a system bus as is the case
for many embedded systems. On such systems, each I2C bus has a number
@@ -51,6 +51,43 @@ The devices will be automatically unbound and destroyed when the I2C bus
they sit on goes away (if ever.)
+Method 1b: Declare the I2C devices via devicetree
+-------------------------------------------------
+
+This method has the same implications as method 1a. The declaration of I2C
+devices is here done via devicetree as subnodes of the master controller.
+
+Example:
+
+ i2c1: i2c@400a0000 {
+ /* ... master properties skipped ... */
+ clock-frequency = <100000>;
+
+ flash@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ pca9532: gpio@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+ };
+
+Here, two devices are attached to the bus using a speed of 100kHz. For
+additional properties which might be needed to set up the device, please refer
+to its devicetree documentation in Documentation/devicetree/bindings/.
+
+
+Method 1c: Declare the I2C devices via ACPI
+-------------------------------------------
+
+ACPI can also describe I2C devices. There is special documentation for this
+which is currently located at Documentation/acpi/enumeration.txt.
+
+
Method 2: Instantiate the devices explicitly
--------------------------------------------
diff --git a/Documentation/ide/00-INDEX b/Documentation/ide/00-INDEX
index d6b778842b75..22f98ca79539 100644
--- a/Documentation/ide/00-INDEX
+++ b/Documentation/ide/00-INDEX
@@ -10,3 +10,5 @@ ide-tape.txt
- info on the IDE ATAPI streaming tape driver
ide.txt
- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
+warm-plug-howto.txt
+ - using sysfs to remove and add IDE devices. \ No newline at end of file
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8f441dab0396..7116fda7077f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1726,16 +1726,16 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
option description.
memmap=nn[KMG]@ss[KMG]
- [KNL] Force usage of a specific region of memory
- Region of memory to be used, from ss to ss+nn.
+ [KNL] Force usage of a specific region of memory.
+ Region of memory to be used is from ss to ss+nn.
memmap=nn[KMG]#ss[KMG]
[KNL,ACPI] Mark specific memory as ACPI data.
- Region of memory to be used, from ss to ss+nn.
+ Region of memory to be marked is from ss to ss+nn.
memmap=nn[KMG]$ss[KMG]
[KNL,ACPI] Mark specific memory as reserved.
- Region of memory to be used, from ss to ss+nn.
+ Region of memory to be reserved is from ss to ss+nn.
Example: Exclude memory from 0x18690000-0x1869ffff
memmap=64K$0x18690000
or
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index fa688538e757..d13b9a9a9e00 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -1,13 +1,15 @@
00-INDEX
- This file
-acer-wmi.txt
- - information on the Acer Laptop WMI Extras driver.
+Makefile
+ - Makefile for building dslm example program.
asus-laptop.txt
- information on the Asus Laptop Extras driver.
disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
+hpfall.c
+ - (HP) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt
diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
index 1ecd1596633e..b4ef1f34e25f 100644
--- a/Documentation/leds/00-INDEX
+++ b/Documentation/leds/00-INDEX
@@ -1,3 +1,7 @@
+00-INDEX
+ - This file
+leds-blinkm.txt
+ - Driver for BlinkM LED-devices.
leds-class.txt
- documents LED handling under Linux.
leds-lp3944.txt
@@ -12,3 +16,7 @@ leds-lp55xx.txt
- description about lp55xx common driver.
leds-lm3556.txt
- notes on how to use the leds-lm3556 driver.
+ledtrig-oneshot.txt
+ - One-shot LED trigger for both sporadic and dense events.
+ledtrig-transient.txt
+ - LED Transient Trigger, one shot timer activation.
diff --git a/Documentation/m68k/00-INDEX b/Documentation/m68k/00-INDEX
index a014e9f00765..2be8c6b00e74 100644
--- a/Documentation/m68k/00-INDEX
+++ b/Documentation/m68k/00-INDEX
@@ -1,5 +1,7 @@
00-INDEX
- this file
+README.buddha
+ - Amiga Buddha and Catweasel IDE Driver
kernel-options.txt
- command line options for Linux/m68k
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index f11580f8719a..557b6ef70c26 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -6,8 +6,14 @@
- information on the 3Com Etherlink III Series Ethernet cards.
6pack.txt
- info on the 6pack protocol, an alternative to KISS for AX.25
-DLINK.txt
- - info on the D-Link DE-600/DE-620 parallel port pocket adapters
+LICENSE.qla3xxx
+ - GPLv2 for QLogic Linux Networking HBA Driver
+LICENSE.qlge
+ - GPLv2 for QLogic Linux qlge NIC Driver
+LICENSE.qlcnic
+ - GPLv2 for QLogic Linux qlcnic NIC Driver
+Makefile
+ - Makefile for docsrc.
PLIP.txt
- PLIP: The Parallel Line Internet Protocol device driver
README.ipw2100
@@ -17,7 +23,7 @@ README.ipw2200
README.sb1000
- info on General Instrument/NextLevel SURFboard1000 cable modem.
alias.txt
- - info on using alias network devices
+ - info on using alias network devices.
arcnet-hardware.txt
- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
arcnet.txt
@@ -80,7 +86,7 @@ framerelay.txt
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
gen_stats.txt
- Generic networking statistics for netlink users.
-generic_hdlc.txt
+generic-hdlc.txt
- The generic High Level Data Link Control (HDLC) layer.
generic_netlink.txt
- info on Generic Netlink
@@ -88,6 +94,8 @@ gianfar.txt
- Gianfar Ethernet Driver.
i40e.txt
- README for the Intel Ethernet Controller XL710 Driver (i40e).
+i40evf.txt
+ - Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
ieee802154.txt
- Linux IEEE 802.15.4 implementation, API and drivers
igb.txt
@@ -102,6 +110,8 @@ ipddp.txt
- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
iphase.txt
- Interphase PCI ATM (i)Chip IA Linux driver info.
+ipsec.txt
+ - Note on not compressing IPSec payload and resulting failed policy check.
ipv6.txt
- Options to the ipv6 kernel module.
ipvs-sysctl.txt
@@ -120,6 +130,8 @@ lapb-module.txt
- programming information of the LAPB module.
ltpc.txt
- the Apple or Farallon LocalTalk PC card driver
+mac80211-auth-assoc-deauth.txt
+ - authentication and association / deauth-disassoc with max80211
mac80211-injection.txt
- HOWTO use packet injection with mac80211
multiqueue.txt
@@ -134,6 +146,10 @@ netdevices.txt
- info on network device driver functions exported to the kernel.
netif-msg.txt
- Design of the network interface message level setting (NETIF_MSG_*).
+netlink_mmap.txt
+ - memory mapped I/O with netlink
+nf_conntrack-sysctl.txt
+ - list of netfilter-sysctl knobs.
nfc.txt
- The Linux Near Field Communication (NFS) subsystem.
openvswitch.txt
@@ -176,7 +192,7 @@ skfp.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
- the driver for SMC's 9000 series of Ethernet cards
-spider-net.txt
+spider_net.txt
- README for the Spidernet Driver (as found in PS3 / Cell BE).
stmmac.txt
- README for the STMicro Synopsys Ethernet driver.
@@ -188,6 +204,8 @@ tcp.txt
- short blurb on how TCP output takes place.
tcp-thin.txt
- kernel tuning options for low rate 'thin' TCP streams.
+team.txt
+ - pointer to information for ethernet teaming devices.
tlan.txt
- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
tproxy.txt
@@ -200,6 +218,8 @@ vortex.txt
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
vxge.txt
- README for the Neterion X3100 PCIe Server Adapter.
+vxlan.txt
+ - Virtual extensible LAN overview
x25.txt
- general info on X.25 development.
x25-iface.txt
diff --git a/Documentation/networking/3c505.txt b/Documentation/networking/3c505.txt
deleted file mode 100644
index 72f38b13101d..000000000000
--- a/Documentation/networking/3c505.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-The 3Com Etherlink Plus (3c505) driver.
-
-This driver now uses DMA. There is currently no support for PIO operation.
-The default DMA channel is 6; this is _not_ autoprobed, so you must
-make sure you configure it correctly. If loading the driver as a
-module, you can do this with "modprobe 3c505 dma=n". If the driver is
-linked statically into the kernel, you must either use an "ether="
-statement on the command line, or change the definition of ELP_DMA in 3c505.h.
-
-The driver will warn you if it has to fall back on the compiled in
-default DMA channel.
-
-If no base address is given at boot time, the driver will autoprobe
-ports 0x300, 0x280 and 0x310 (in that order). If no IRQ is given, the driver
-will try to probe for it.
-
-The driver can be used as a loadable module.
-
-Theoretically, one instance of the driver can now run multiple cards,
-in the standard way (when loading a module, say "modprobe 3c505
-io=0x300,0x340 irq=10,11 dma=6,7" or whatever). I have not tested
-this, though.
-
-The driver may now support revision 2 hardware; the dependency on
-being able to read the host control register has been removed. This
-is also untested, since I don't have a suitable card.
-
-Known problems:
- I still see "DMA upload timed out" messages from time to time. These
-seem to be fairly non-fatal though.
- The card is old and slow.
-
-To do:
- Improve probe/setup code
- Test multicast and promiscuous operation
-
-Authors:
- The driver is mainly written by Craig Southeren, email
- <craigs@ineluki.apana.org.au>.
- Parts of the driver (adapting the driver to 1.1.4+ kernels,
- IRQ/address detection, some changes) and this README by
- Juha Laiho <jlaiho@ichaos.nullnet.fi>.
- DMA mode, more fixes, etc, by Philip Blundell <pjb27@cam.ac.uk>
- Multicard support, Software configurable DMA, etc., by
- Christopher Collins <ccollins@pcug.org.au>
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index f3089d423515..0cbe6ec22d6f 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -554,12 +554,6 @@ solution for a couple of reasons:
not specified in the struct can_frame and therefore it is only valid in
CANFD_MTU sized CAN FD frames.
- As long as the payload length is <=8 the received CAN frames from CAN FD
- capable CAN devices can be received and read by legacy sockets too. When
- user-generated CAN FD frames have a payload length <=8 these can be send
- by legacy CAN network interfaces too. Sending CAN FD frames with payload
- length > 8 to a legacy CAN network interface returns an -EMSGSIZE error.
-
Implementation hint for new CAN applications:
To build a CAN FD aware application use struct canfd_frame as basic CAN
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 0103e4b15b0e..ebff6ee52441 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -75,14 +75,26 @@ Before the controller can make use of the PHY, it has to get a reference to
it. This framework provides the following APIs to get a reference to the PHY.
struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
struct phy *devm_phy_get(struct device *dev, const char *string);
-
-phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
-the string arguments should contain the phy name as given in the dt data and
-in the case of non-dt boot, it should contain the label of the PHY.
-The only difference between the two APIs is that devm_phy_get associates the
-device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY. The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.
5. Releasing a reference to the PHY
diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX
index a4d682f54231..ad04cc8097ed 100644
--- a/Documentation/power/00-INDEX
+++ b/Documentation/power/00-INDEX
@@ -4,6 +4,8 @@ apm-acpi.txt
- basic info about the APM and ACPI support.
basic-pm-debugging.txt
- Debugging suspend and resume
+charger-manager.txt
+ - Battery charger management.
devices.txt
- How drivers interact with system-wide power management
drivers-testing.txt
@@ -22,6 +24,8 @@ pm_qos_interface.txt
- info on Linux PM Quality of Service interface
power_supply_class.txt
- Tells userspace about battery, UPS, AC or DC power supply properties
+runtime_pm.txt
+ - Power management framework for I/O devices.
s2ram.txt
- How to get suspend to ram working (and debug it when it isn't)
states.txt
@@ -38,7 +42,5 @@ tricks.txt
- How to trick software suspend (to disk) into working when it isn't
userland-swsusp.txt
- Experimental implementation of software suspend in userspace
-video_extension.txt
- - ACPI video extensions
video.txt
- Video issues during resume from suspend
diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c
index a74d0a84d329..4aba0436da65 100644
--- a/Documentation/ptp/testptp.c
+++ b/Documentation/ptp/testptp.c
@@ -117,6 +117,7 @@ static void usage(char *progname)
" -f val adjust the ptp clock frequency by 'val' ppb\n"
" -g get the ptp clock time\n"
" -h prints this message\n"
+ " -i val index for event/trigger\n"
" -k val measure the time offset between system and phc clock\n"
" for 'val' times (Maximum 25)\n"
" -p val enable output with a period of 'val' nanoseconds\n"
@@ -154,6 +155,7 @@ int main(int argc, char *argv[])
int capabilities = 0;
int extts = 0;
int gettime = 0;
+ int index = 0;
int oneshot = 0;
int pct_offset = 0;
int n_samples = 0;
@@ -167,7 +169,7 @@ int main(int argc, char *argv[])
progname = strrchr(argv[0], '/');
progname = progname ? 1+progname : argv[0];
- while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghk:p:P:sSt:v"))) {
+ while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:p:P:sSt:v"))) {
switch (c) {
case 'a':
oneshot = atoi(optarg);
@@ -190,6 +192,9 @@ int main(int argc, char *argv[])
case 'g':
gettime = 1;
break;
+ case 'i':
+ index = atoi(optarg);
+ break;
case 'k':
pct_offset = 1;
n_samples = atoi(optarg);
@@ -301,7 +306,7 @@ int main(int argc, char *argv[])
if (extts) {
memset(&extts_request, 0, sizeof(extts_request));
- extts_request.index = 0;
+ extts_request.index = index;
extts_request.flags = PTP_ENABLE_FEATURE;
if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
perror("PTP_EXTTS_REQUEST");
@@ -375,7 +380,7 @@ int main(int argc, char *argv[])
return -1;
}
memset(&perout_request, 0, sizeof(perout_request));
- perout_request.index = 0;
+ perout_request.index = index;
perout_request.start.sec = ts.tv_sec + 2;
perout_request.start.nsec = 0;
perout_request.period.sec = 0;
diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX
index 3a2b96302ecc..10c874ebdfe5 100644
--- a/Documentation/s390/00-INDEX
+++ b/Documentation/s390/00-INDEX
@@ -16,11 +16,13 @@ Debugging390.txt
- hints for debugging on s390 systems.
driver-model.txt
- information on s390 devices and the driver model.
+kvm.txt
+ - ioctl calls to /dev/kvm on s390.
monreader.txt
- information on accessing the z/VM monitor stream from Linux.
+qeth.txt
+ - HiperSockets Bridge Port Support.
s390dbf.txt
- information on using the s390 debug feature.
-TAPE
- - information on the driver for channel-attached tapes.
-zfcpdump
+zfcpdump.txt
- information on the s390 SCSI dump tool.
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
index 46702e4f89c9..eccf7ad2e7f9 100644
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@@ -2,6 +2,8 @@
- this file.
sched-arch.txt
- CPU Scheduler implementation hints for architecture specific code.
+sched-bwc.txt
+ - CFS bandwidth control overview.
sched-design-CFS.txt
- goals, design and implementation of the Completely Fair Scheduler.
sched-domains.txt
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX
index 2044be565d93..c4b978a72f78 100644
--- a/Documentation/scsi/00-INDEX
+++ b/Documentation/scsi/00-INDEX
@@ -36,6 +36,8 @@ NinjaSCSI.txt
- info on WorkBiT NinjaSCSI-32/32Bi driver
aacraid.txt
- Driver supporting Adaptec RAID controllers
+advansys.txt
+ - List of Advansys Host Adapters
aha152x.txt
- info on driver for Adaptec AHA152x based adapters
aic79xx.txt
@@ -44,6 +46,12 @@ aic7xxx.txt
- info on driver for Adaptec controllers
arcmsr_spec.txt
- ARECA FIRMWARE SPEC (for IOP331 adapter)
+bfa.txt
+ - Brocade FC/FCOE adapter driver.
+bnx2fc.txt
+ - FCoE hardware offload for Broadcom network interfaces.
+cxgb3i.txt
+ - Chelsio iSCSI Linux Driver
dc395x.txt
- README file for the dc395x SCSI driver
dpti.txt
@@ -52,18 +60,24 @@ dtc3x80.txt
- info on driver for DTC 2x80 based adapters
g_NCR5380.txt
- info on driver for NCR5380 and NCR53c400 based adapters
+hpsa.txt
+ - HP Smart Array Controller SCSI driver.
hptiop.txt
- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
in2000.txt
- info on in2000 driver
libsas.txt
- Serial Attached SCSI management layer.
+link_power_management_policy.txt
+ - Link power management options.
lpfc.txt
- LPFC driver release notes
megaraid.txt
- Common Management Module, shared code handling ioctls for LSI drivers
ncr53c8xx.txt
- info on driver for NCR53c8xx based adapters
+osd.txt
+ Object-Based Storage Device, command set introduction.
osst.txt
- info on driver for OnStream SC-x0 SCSI tape
ppa.txt
@@ -74,6 +88,8 @@ scsi-changer.txt
- README for the SCSI media changer driver
scsi-generic.txt
- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
+scsi-parameters.txt
+ - List of SCSI-parameters to pass to the kernel at module load-time.
scsi.txt
- short blurb on using SCSI support as a module.
scsi_mid_low_api.txt
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index 1f1b22fbd739..f9c6b5ed03e7 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -4,10 +4,12 @@ README.cycladesZ
- info on Cyclades-Z firmware loading.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
-hayes-esp.txt
- - info on using the Hayes ESP serial driver.
+driver
+ - intro to the low level serial driver.
moxa-smartio
- file with info on installing/using Moxa multiport serial driver.
+n_gsm.txt
+ - GSM 0710 tty multiplexer howto.
riscom8.txt
- notes on using the RISCom/8 multi-port serial driver.
rocket.txt
diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX
new file mode 100644
index 000000000000..a128fa835512
--- /dev/null
+++ b/Documentation/spi/00-INDEX
@@ -0,0 +1,22 @@
+00-INDEX
+ - this file.
+Makefile
+ - Makefile for the example sourcefiles.
+butterfly
+ - AVR Butterfly SPI driver overview and pin configuration.
+ep93xx_spi
+ - Basic EP93xx SPI driver configuration.
+pxa2xx
+ - PXA2xx SPI master controller build by spi_message fifo wq
+spidev
+ - Intro to the userspace API for spi devices
+spidev_fdx.c
+ - spidev example file
+spi-lm70llp
+ - Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
+spi-sc18is602
+ - NXP SC18IS602/603 I2C-bus to SPI bridge
+spi-summary
+ - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
+spidev_test.c
+ - SPI testing utility.
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index f72e0d1e0da8..7982bcc4d151 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -543,7 +543,22 @@ SPI MASTER METHODS
queuing transfers that arrive in the meantime. When the driver is
finished with this message, it must call
spi_finalize_current_message() so the subsystem can issue the next
- transfer. This may sleep.
+ message. This may sleep.
+
+ master->transfer_one(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *transfer)
+ The subsystem calls the driver to transfer a single transfer while
+ queuing transfers that arrive in the meantime. When the driver is
+ finished with this transfer, it must call
+ spi_finalize_current_transfer() so the subsystem can issue the next
+ transfer. This may sleep. Note: transfer_one and transfer_one_message
+ are mutually exclusive; when both are set, the generic subsystem does
+ not call your transfer_one callback.
+
+ Return values:
+ negative errno: error
+ 0: transfer is finished
+ 1: transfer is still in progress
DEPRECATED METHODS
diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX
index ef2ccbf77fa2..6d042dc1cce0 100644
--- a/Documentation/timers/00-INDEX
+++ b/Documentation/timers/00-INDEX
@@ -8,6 +8,8 @@ hpet_example.c
- sample hpet timer test program
hrtimers.txt
- subsystem for high-resolution kernel timers
+Makefile
+ - Build and link hpet_example
NO_HZ.txt
- Summary of the different methods for the scheduler clock-interrupts management.
timers-howto.txt
diff --git a/Documentation/virtual/kvm/00-INDEX b/Documentation/virtual/kvm/00-INDEX
index 641ec9220179..fee9f2bf9c64 100644
--- a/Documentation/virtual/kvm/00-INDEX
+++ b/Documentation/virtual/kvm/00-INDEX
@@ -20,5 +20,7 @@ ppc-pv.txt
- the paravirtualization interface on PowerPC.
review-checklist.txt
- review checklist for KVM patches.
+s390-diag.txt
+ - Diagnose hypercall description (for IBM S/390)
timekeeping.txt
- timekeeping virtualization for x86-based architectures.
diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
index a39d06680e1c..081c49777abb 100644
--- a/Documentation/vm/00-INDEX
+++ b/Documentation/vm/00-INDEX
@@ -16,8 +16,6 @@ hwpoison.txt
- explains what hwpoison is
ksm.txt
- how to use the Kernel Samepage Merging feature.
-locking
- - info on how locking and synchronization is done in the Linux vm code.
numa
- information about NUMA specific code in the Linux vm.
numa_memory_policy.txt
@@ -32,6 +30,8 @@ slub.txt
- a short users guide for SLUB.
soft-dirty.txt
- short explanation for soft-dirty PTEs
+split_page_table_lock
+ - Separate per-table lock to improve scalability of the old page_table_lock.
transhuge.txt
- Transparent Hugepage Support, alternative way of using hugepages.
unevictable-lru.txt
diff --git a/Documentation/w1/masters/00-INDEX b/Documentation/w1/masters/00-INDEX
index d63fa024ac05..8330cf9325f0 100644
--- a/Documentation/w1/masters/00-INDEX
+++ b/Documentation/w1/masters/00-INDEX
@@ -4,7 +4,9 @@ ds2482
- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
ds2490
- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
-mxc_w1
+mxc-w1
- W1 master controller driver found on Freescale MX2/MX3 SoCs
+omap-hdq
+ - HDQ/1-wire module of TI OMAP 2430/3430.
w1-gpio
- GPIO 1-wire bus master driver.
diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX
index 75613c9ac4db..6e18c70c3474 100644
--- a/Documentation/w1/slaves/00-INDEX
+++ b/Documentation/w1/slaves/00-INDEX
@@ -4,3 +4,5 @@ w1_therm
- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
w1_ds2423
- The Maxim/Dallas Semiconductor ds2423 counter device.
+w1_ds28e04
+ - The Maxim/Dallas Semiconductor ds28e04 eeprom.
diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX
index f37b46d34861..692264456f0f 100644
--- a/Documentation/x86/00-INDEX
+++ b/Documentation/x86/00-INDEX
@@ -1,6 +1,20 @@
00-INDEX
- this file
-mtrr.txt
- - how to use x86 Memory Type Range Registers to increase performance
+boot.txt
+ - List of boot protocol versions
+early-microcode.txt
+ - How to load microcode from an initrd-CPIO archive early to fix CPU issues.
+earlyprintk.txt
+ - Using earlyprintk with a USB2 debug port key.
+entry_64.txt
+ - Describe (some of the) kernel entry points for x86.
exception-tables.txt
- why and how Linux kernel uses exception tables on x86
+mtrr.txt
+ - how to use x86 Memory Type Range Registers to increase performance
+pat.txt
+ - Page Attribute Table intro and API
+usb-legacy-support.txt
+ - how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
+zero-page.txt
+ - layout of the first page of memory.
diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt
index 28fa325b7461..6f6d956ac1c9 100644
--- a/Documentation/zh_CN/arm64/booting.txt
+++ b/Documentation/zh_CN/arm64/booting.txt
@@ -7,7 +7,7 @@ help. Contact the Chinese maintainer if this translation is outdated
or if there is a problem with the translation.
Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
---------------------------------------------------------------------
Documentation/arm64/booting.txt 的中文翻译
@@ -16,9 +16,9 @@ Documentation/arm64/booting.txt 的中文翻译
译存在问题,请联系中文版维护者。
英文版维护者: Will Deacon <will.deacon@arm.com>
-中文版维护者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版维护者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者: 傅炜 Fu Wei <wefu@redhat.com>
以下为正文
---------------------------------------------------------------------
@@ -64,8 +64,8 @@ RAM,或可能使用对这个设备已知的 RAM 信息,还可能使用任何
必要性: 强制
-设备树数据块(dtb)大小必须不大于 2 MB,且位于从内核映像起始算起第一个
-512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+设备树数据块(dtb)必须 8 字节对齐,并位于从内核映像起始算起第一个 512MB
+内,且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来
映射此数据块。
@@ -84,13 +84,23 @@ AArch64 内核当前没有提供自解压代码,因此如果使用了压缩内
必要性: 强制
-已解压的内核映像包含一个 32 字节的头,内容如下:
+已解压的内核映像包含一个 64 字节的头,内容如下:
- u32 magic = 0x14000008; /* 跳转到 stext, 小端 */
- u32 res0 = 0; /* 保留 */
+ u32 code0; /* 可执行代码 */
+ u32 code1; /* 可执行代码 */
u64 text_offset; /* 映像装载偏移 */
+ u64 res0 = 0; /* 保留 */
u64 res1 = 0; /* 保留 */
u64 res2 = 0; /* 保留 */
+ u64 res3 = 0; /* 保留 */
+ u64 res4 = 0; /* 保留 */
+ u32 magic = 0x644d5241; /* 魔数, 小端, "ARM\x64" */
+ u32 res5 = 0; /* 保留 */
+
+
+映像头注释:
+
+- code0/code1 负责跳转到 stext.
映像必须位于系统 RAM 起始处的特定偏移(当前是 0x80000)。系统 RAM
的起始地址必须是以 2MB 对齐的。
@@ -118,9 +128,9 @@ AArch64 内核当前没有提供自解压代码,因此如果使用了压缩内
外部高速缓存(如果存在)必须配置并禁用。
- 架构计时器
- CNTFRQ 必须设定为计时器的频率。
- 如果在 EL1 模式下进入内核,则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
- 必须置位。
+ CNTFRQ 必须设定为计时器的频率,且 CNTVOFF 必须设定为对所有 CPU
+ 都一致的值。如果在 EL1 模式下进入内核,则 CNTHCTL_EL2 中的
+ EL1PCTEN (bit 0) 必须置位。
- 一致性
通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
@@ -131,23 +141,40 @@ AArch64 内核当前没有提供自解压代码,因此如果使用了压缩内
在进入内核映像的异常级中,所有构架中可写的系统寄存器必须通过软件
在一个更高的异常级别下初始化,以防止在 未知 状态下运行。
+以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
+必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
+
引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口:
- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
- 数据块必须在每个 CPU 节点中包含以下内容:
-
- 1、‘enable-method’属性。目前,此字段支持的值仅为字符串“spin-table”。
-
- 2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+ 数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性,所
+ 支持的 enable-method 请见下文。
引导装载程序必须生成这些设备树属性,并在跳入内核入口之前将其插入
数据块。
-- 任何辅助 CPU 必须在内存保留区(通过设备树中的 /memreserve/ 域传递
+- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
+ 节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
+ 64 位自然对齐且初始化为零的内存位置。
+
+ 这些 CPU 必须在内存保留区(通过设备树中的 /memreserve/ 域传递
给内核)中自旋于内核之外,轮询它们的 cpu-release-addr 位置(必须
包含在保留区中)。可通过插入 wfe 指令来降低忙循环开销,而主 CPU 将
发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
- 时,CPU 必须直接跳入此值所指向的地址。
+ 时,CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值,
+ 因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
+
+- enable-method 为 “psci” 的 CPU 保持在内核外(比如,在
+ memory 节点中描述为内核空间的内存区外,或在通过设备树 /memreserve/
+ 域中描述为内核保留区的空间中)。内核将会发起在 ARM 文档(编号
+ ARM DEN 0022A:用于 ARM 上的电源状态协调接口系统软件)中描述的
+ CPU_ON 调用来将 CPU 带入内核。
+
+ *译者注:到文档翻译时,此文档已更新为 ARM DEN 0022B。
+
+ 设备树必须包含一个 ‘psci’ 节点,请参考以下文档:
+ Documentation/devicetree/bindings/arm/psci.txt
+
- 辅助 CPU 通用寄存器设置
x0 = 0 (保留,将来可能使用)
diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt
index a5f6283829f9..a782704c1cb5 100644
--- a/Documentation/zh_CN/arm64/memory.txt
+++ b/Documentation/zh_CN/arm64/memory.txt
@@ -7,7 +7,7 @@ help. Contact the Chinese maintainer if this translation is outdated
or if there is a problem with the translation.
Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
---------------------------------------------------------------------
Documentation/arm64/memory.txt 的中文翻译
@@ -16,9 +16,9 @@ Documentation/arm64/memory.txt 的中文翻译
译存在问题,请联系中文版维护者。
英文版维护者: Catalin Marinas <catalin.marinas@arm.com>
-中文版维护者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版维护者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者: 傅炜 Fu Wei <wefu@redhat.com>
以下为正文
---------------------------------------------------------------------
@@ -41,7 +41,7 @@ AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置,对于用户和
TTBR1 中,且从不写入 TTBR0。
-AArch64 Linux 内存布局:
+AArch64 Linux 在页大小为 4KB 时的内存布局:
起始地址 结束地址 大小 用途
-----------------------------------------------------------------------
@@ -55,15 +55,42 @@ ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
ffffffbe00000000 ffffffbffbbfffff ~8GB [防护页,未来用于 vmmemap]
+ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk 设备
+
ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O 空间
-ffffffbbffff0000 ffffffbcffffffff ~2MB [防护页]
+ffffffbffbe10000 ffffffbcffffffff ~2MB [防护页]
ffffffbffc000000 ffffffbfffffffff 64MB 模块
ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
+AArch64 Linux 在页大小为 64KB 时的内存布局:
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000000000000000 000003ffffffffff 4TB 用户空间
+
+fffffc0000000000 fffffdfbfffeffff ~2TB vmalloc
+
+fffffdfbffff0000 fffffdfbffffffff 64KB [防护页]
+
+fffffdfc00000000 fffffdfdffffffff 8GB vmemmap
+
+fffffdfe00000000 fffffdfffbbfffff ~8GB [防护页,未来用于 vmmemap]
+
+fffffdfffbc00000 fffffdfffbdfffff 2MB earlyprintk 设备
+
+fffffdfffbe00000 fffffdfffbe0ffff 64KB PCI I/O 空间
+
+fffffdfffbe10000 fffffdfffbffffff ~2MB [防护页]
+
+fffffdfffc000000 fffffdffffffffff 64MB 模块
+
+fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射
+
+
4KB 页大小的转换表查找:
+--------+--------+--------+--------+--------+--------+--------+--------+
@@ -91,3 +118,10 @@ ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
| | +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
| +-------------------------------> [47:42] L1 索引 (未使用)
+-------------------------------------------------> [63] TTBR0/1
+
+当使用 KVM 时, 管理程序(hypervisor)在 EL2 中通过相对内核虚拟地址的
+一个固定偏移来映射内核页(内核虚拟地址的高 24 位设为零):
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000004000000000 0000007fffffffff 256GB 在 HYP 中映射的内核对象
diff --git a/Documentation/zh_CN/arm64/tagged-pointers.txt b/Documentation/zh_CN/arm64/tagged-pointers.txt
new file mode 100644
index 000000000000..2664d1bd5a1c
--- /dev/null
+++ b/Documentation/zh_CN/arm64/tagged-pointers.txt
@@ -0,0 +1,52 @@
+Chinese translated version of Documentation/arm64/tagged-pointers.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arm64/tagged-pointers.txt 的中文翻译
+
+如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
+交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题,请联系中文版维护者。
+
+英文版维护者: Will Deacon <will.deacon@arm.com>
+中文版维护者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者: 傅炜 Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+ Linux 在 AArch64 中带标记的虚拟地址
+ =================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
+AArch64 Linux 中的潜在用途。
+
+内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换(即用户空间
+映射),其虚拟地址的最高 8 位(63:56)会被转换硬件所忽略。这种机制
+让这些位可供应用程序自由使用,其注意事项如下:
+
+ (1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
+ 这意味着任何携带用户空间虚拟地址的系统调用(syscall)
+ 参数 *必须* 在陷入内核前使它们的最高字节被清零。
+
+ (2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
+ 标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
+ 地址所携带的包含其内部域信息的标记。此规则的一个例外是
+ 当信号是在调试观察点的异常处理程序中产生的,此时标记的
+ 信息将被保存。
+
+ (3) 当使用带标记的指针时需特别留心,因为仅对两个虚拟地址
+ 的高字节,C 编译器很可能无法判断它们是不同的。
+
+此构架会阻止对带标记的 PC 指针的利用,因此在异常返回时,其高字节
+将被设置成一个为 “55” 的扩展符。
diff --git a/MAINTAINERS b/MAINTAINERS
index b2cf5cfb4d29..b7befe758429 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -73,7 +73,8 @@ Descriptions of section entries:
L: Mailing list that is relevant to this area
W: Web-page with status/info
Q: Patchwork web based patch tracking system site
- T: SCM tree type and location. Type is one of: git, hg, quilt, stgit, topgit.
+ T: SCM tree type and location.
+ Type is one of: git, hg, quilt, stgit, topgit
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
Maintained: Someone actually looks after it.
@@ -473,7 +474,7 @@ F: net/rxrpc/af_rxrpc.c
AGPGART DRIVER
M: David Airlie <airlied@linux.ie>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T: git git://people.freedesktop.org/~airlied/linux (part of drm maint)
S: Maintained
F: drivers/char/agp/
F: include/linux/agp*
@@ -538,7 +539,7 @@ F: arch/alpha/
ALTERA UART/JTAG UART SERIAL DRIVERS
M: Tobias Klauser <tklauser@distanz.ch>
L: linux-serial@vger.kernel.org
-L: nios2-dev@sopc.et.ntust.edu.tw (moderated for non-subscribers)
+L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
S: Maintained
F: drivers/tty/serial/altera_uart.c
F: drivers/tty/serial/altera_jtaguart.c
@@ -1612,11 +1613,11 @@ S: Maintained
F: drivers/net/wireless/atmel*
ATTO EXPRESSSAS SAS/SATA RAID SCSI DRIVER
-M: Bradley Grove <linuxdrivers@attotech.com>
-L: linux-scsi@vger.kernel.org
-W: http://www.attotech.com
-S: Supported
-F: drivers/scsi/esas2r
+M: Bradley Grove <linuxdrivers@attotech.com>
+L: linux-scsi@vger.kernel.org
+W: http://www.attotech.com
+S: Supported
+F: drivers/scsi/esas2r
AUDIT SUBSYSTEM
M: Eric Paris <eparis@redhat.com>
@@ -1860,6 +1861,7 @@ F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
+M: Matt Porter <mporter@linaro.org>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://git.github.com/broadcom/bcm11351
S: Maintained
@@ -2158,7 +2160,7 @@ F: Documentation/zh_CN/
CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
M: Peter Chen <Peter.Chen@freescale.com>
-T: git://github.com/hzpeterchen/linux-usb.git
+T: git git://github.com/hzpeterchen/linux-usb.git
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/chipidea/
@@ -2178,9 +2180,9 @@ S: Supported
F: drivers/net/ethernet/cisco/enic/
CISCO VIC LOW LATENCY NIC DRIVER
-M: Upinder Malhi <umalhi@cisco.com>
-S: Supported
-F: drivers/infiniband/hw/usnic
+M: Upinder Malhi <umalhi@cisco.com>
+S: Supported
+F: drivers/infiniband/hw/usnic
CIRRUS LOGIC EP93XX ETHERNET DRIVER
M: Hartley Sweeten <hsweeten@visionengravers.com>
@@ -2367,7 +2369,7 @@ F: include/linux/cpufreq.h
CPU FREQUENCY DRIVERS - ARM BIG LITTLE
M: Viresh Kumar <viresh.kumar@linaro.org>
-M: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+M: Sudeep Holla <sudeep.holla@arm.com>
L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
W: http://www.arm.com/products/processors/technologies/biglittleprocessing.php
@@ -2377,20 +2379,20 @@ F: drivers/cpufreq/arm_big_little.c
F: drivers/cpufreq/arm_big_little_dt.c
CPUIDLE DRIVER - ARM BIG LITTLE
-M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-M: Daniel Lezcano <daniel.lezcano@linaro.org>
-L: linux-pm@vger.kernel.org
-L: linux-arm-kernel@lists.infradead.org
-T: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
-S: Maintained
-F: drivers/cpuidle/cpuidle-big_little.c
+M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M: Daniel Lezcano <daniel.lezcano@linaro.org>
+L: linux-pm@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+S: Maintained
+F: drivers/cpuidle/cpuidle-big_little.c
CPUIDLE DRIVERS
M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Daniel Lezcano <daniel.lezcano@linaro.org>
L: linux-pm@vger.kernel.org
S: Maintained
-T: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
F: drivers/cpuidle/*
F: include/linux/cpuidle.h
@@ -2408,8 +2410,10 @@ F: tools/power/cpupower/
CPUSETS
M: Li Zefan <lizefan@huawei.com>
+L: cgroups@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
S: Maintained
F: Documentation/cgroups/cpusets.txt
F: include/linux/cpuset.h
@@ -2455,9 +2459,9 @@ S: Maintained
F: sound/pci/cs5535audio/
CW1200 WLAN driver
-M: Solomon Peachy <pizza@shaftnet.org>
-S: Maintained
-F: drivers/net/wireless/cw1200/
+M: Solomon Peachy <pizza@shaftnet.org>
+S: Maintained
+F: drivers/net/wireless/cw1200/
CX18 VIDEO4LINUX DRIVER
M: Andy Walls <awalls@md.metrocast.net>
@@ -2608,9 +2612,9 @@ DC395x SCSI driver
M: Oliver Neukum <oliver@neukum.org>
M: Ali Akcaagac <aliakc@web.de>
M: Jamie Lenehan <lenehan@twibble.org>
-W: http://twibble.org/dist/dc395x/
L: dc395x@twibble.org
-L: http://lists.twibble.org/mailman/listinfo/dc395x/
+W: http://twibble.org/dist/dc395x/
+W: http://lists.twibble.org/mailman/listinfo/dc395x/
S: Maintained
F: Documentation/scsi/dc395x.txt
F: drivers/scsi/dc395x.*
@@ -2845,19 +2849,29 @@ F: lib/kobj*
DRM DRIVERS
M: David Airlie <airlied@linux.ie>
L: dri-devel@lists.freedesktop.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T: git git://people.freedesktop.org/~airlied/linux
S: Maintained
F: drivers/gpu/drm/
F: include/drm/
F: include/uapi/drm/
+RADEON DRM DRIVERS
+M: Alex Deucher <alexander.deucher@amd.com>
+M: Christian König <christian.koenig@amd.com>
+L: dri-devel@lists.freedesktop.org
+T: git git://people.freedesktop.org/~agd5f/linux
+S: Supported
+F: drivers/gpu/drm/radeon/
+F: include/drm/radeon*
+F: include/uapi/drm/radeon*
+
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Daniel Vetter <daniel.vetter@ffwll.ch>
M: Jani Nikula <jani.nikula@linux.intel.com>
L: intel-gfx@lists.freedesktop.org
L: dri-devel@lists.freedesktop.org
Q: http://patchwork.freedesktop.org/project/intel-gfx/
-T: git git://people.freedesktop.org/~danvet/drm-intel
+T: git git://anongit.freedesktop.org/drm-intel
S: Supported
F: drivers/gpu/drm/i915/
F: include/drm/i915*
@@ -3082,6 +3096,8 @@ F: fs/ecryptfs/
EDAC-CORE
M: Doug Thompson <dougthompson@xmission.com>
+M: Borislav Petkov <bp@alien8.de>
+M: Mauro Carvalho Chehab <m.chehab@samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Supported
@@ -3324,6 +3340,17 @@ S: Maintained
F: include/linux/netfilter_bridge/
F: net/bridge/
+ETHERNET PHY LIBRARY
+M: Florian Fainelli <f.fainelli@gmail.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: include/linux/phy.h
+F: include/linux/phy_fixed.h
+F: drivers/net/phy/
+F: Documentation/networking/phy.txt
+F: drivers/of/of_mdio.c
+F: drivers/of/of_net.c
+
EXT2 FILE SYSTEM
M: Jan Kara <jack@suse.cz>
L: linux-ext4@vger.kernel.org
@@ -4534,6 +4561,7 @@ F: Documentation/networking/ixgbevf.txt
F: Documentation/networking/i40e.txt
F: Documentation/networking/i40evf.txt
F: drivers/net/ethernet/intel/
+F: drivers/net/ethernet/intel/*/
INTEL-MID GPIO DRIVER
M: David Cohen <david.a.cohen@linux.intel.com>
@@ -4890,7 +4918,7 @@ F: drivers/staging/ktap/
KCONFIG
M: "Yann E. MORIN" <yann.morin.1998@free.fr>
L: linux-kbuild@vger.kernel.org
-T: git://gitorious.org/linux-kconfig/linux-kconfig
+T: git git://gitorious.org/linux-kconfig/linux-kconfig
S: Maintained
F: Documentation/kbuild/kconfig-language.txt
F: scripts/kconfig/
@@ -5447,11 +5475,11 @@ S: Maintained
F: drivers/media/tuners/m88ts2022*
MA901 MASTERKIT USB FM RADIO DRIVER
-M: Alexey Klimov <klimov.linux@gmail.com>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-S: Maintained
-F: drivers/media/radio/radio-ma901.c
+M: Alexey Klimov <klimov.linux@gmail.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/radio/radio-ma901.c
MAC80211
M: Johannes Berg <johannes@sipsolutions.net>
@@ -5487,6 +5515,11 @@ W: http://www.kernel.org/doc/man-pages
L: linux-man@vger.kernel.org
S: Maintained
+MARVELL ARMADA DRM SUPPORT
+M: Russell King <rmk+kernel@arm.linux.org.uk>
+S: Maintained
+F: drivers/gpu/drm/armada/
+
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
M: Mirko Lindner <mlindner@marvell.com>
M: Stephen Hemminger <stephen@networkplumber.org>
@@ -5607,7 +5640,7 @@ F: drivers/scsi/megaraid/
MELLANOX ETHERNET DRIVER (mlx4_en)
M: Amir Vadai <amirv@mellanox.com>
-L: netdev@vger.kernel.org
+L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
Q: http://patchwork.ozlabs.org/project/netdev/list/
@@ -5648,7 +5681,7 @@ F: include/linux/mtd/
F: include/uapi/mtd/
MEN A21 WATCHDOG DRIVER
-M: Johannes Thumshirn <johannes.thumshirn@men.de>
+M: Johannes Thumshirn <johannes.thumshirn@men.de>
L: linux-watchdog@vger.kernel.org
S: Supported
F: drivers/watchdog/mena21_wdt.c
@@ -5704,20 +5737,20 @@ L: linux-rdma@vger.kernel.org
W: http://www.mellanox.com
Q: http://patchwork.ozlabs.org/project/netdev/list/
Q: http://patchwork.kernel.org/project/linux-rdma/list/
-T: git://openfabrics.org/~eli/connect-ib.git
+T: git git://openfabrics.org/~eli/connect-ib.git
S: Supported
F: drivers/net/ethernet/mellanox/mlx5/core/
F: include/linux/mlx5/
Mellanox MLX5 IB driver
-M: Eli Cohen <eli@mellanox.com>
-L: linux-rdma@vger.kernel.org
-W: http://www.mellanox.com
-Q: http://patchwork.kernel.org/project/linux-rdma/list/
-T: git://openfabrics.org/~eli/connect-ib.git
-S: Supported
-F: include/linux/mlx5/
-F: drivers/infiniband/hw/mlx5/
+M: Eli Cohen <eli@mellanox.com>
+L: linux-rdma@vger.kernel.org
+W: http://www.mellanox.com
+Q: http://patchwork.kernel.org/project/linux-rdma/list/
+T: git git://openfabrics.org/~eli/connect-ib.git
+S: Supported
+F: include/linux/mlx5/
+F: drivers/infiniband/hw/mlx5/
MODULE SUPPORT
M: Rusty Russell <rusty@rustcorp.com.au>
@@ -6142,6 +6175,12 @@ S: Supported
F: drivers/block/nvme*
F: include/linux/nvme.h
+NXP TDA998X DRM DRIVER
+M: Russell King <rmk+kernel@arm.linux.org.uk>
+S: Supported
+F: drivers/gpu/drm/i2c/tda998x_drv.c
+F: include/drm/i2c/tda998x.h
+
OMAP SUPPORT
M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
@@ -7196,7 +7235,7 @@ S: Maintained
F: drivers/net/ethernet/rdc/r6040.c
RDS - RELIABLE DATAGRAM SOCKETS
-M: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
+M: Chien Yen <chien.yen@oracle.com>
L: rds-devel@oss.oracle.com (moderated for non-subscribers)
S: Supported
F: net/rds/
@@ -8429,8 +8468,8 @@ TARGET SUBSYSTEM
M: Nicholas A. Bellinger <nab@linux-iscsi.org>
L: linux-scsi@vger.kernel.org
L: target-devel@vger.kernel.org
-L: http://groups.google.com/group/linux-iscsi-target-dev
W: http://www.linux-iscsi.org
+W: http://groups.google.com/group/linux-iscsi-target-dev
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
S: Supported
F: drivers/target/
@@ -8671,17 +8710,17 @@ S: Maintained
F: drivers/media/radio/radio-raremono.c
THERMAL
-M: Zhang Rui <rui.zhang@intel.com>
-M: Eduardo Valentin <eduardo.valentin@ti.com>
-L: linux-pm@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
-Q: https://patchwork.kernel.org/project/linux-pm/list/
-S: Supported
-F: drivers/thermal/
-F: include/linux/thermal.h
-F: include/linux/cpu_cooling.h
-F: Documentation/devicetree/bindings/thermal/
+M: Zhang Rui <rui.zhang@intel.com>
+M: Eduardo Valentin <eduardo.valentin@ti.com>
+L: linux-pm@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
+Q: https://patchwork.kernel.org/project/linux-pm/list/
+S: Supported
+F: drivers/thermal/
+F: include/linux/thermal.h
+F: include/linux/cpu_cooling.h
+F: Documentation/devicetree/bindings/thermal/
THINGM BLINK(1) USB RGB LED DRIVER
M: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
@@ -9715,7 +9754,6 @@ F: drivers/xen/*swiotlb*
XFS FILESYSTEM
P: Silicon Graphics Inc
M: Dave Chinner <david@fromorbit.com>
-M: Ben Myers <bpm@sgi.com>
M: xfs@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
@@ -9784,7 +9822,7 @@ ZR36067 VIDEO FOR LINUX DRIVER
L: mjpeg-users@lists.sourceforge.net
L: linux-media@vger.kernel.org
W: http://mjpeg.sourceforge.net/driver-zoran/
-T: Mercurial http://linuxtv.org/hg/v4l-dvb
+T: hg http://linuxtv.org/hg/v4l-dvb
S: Odd Fixes
F: drivers/media/pci/zoran/
diff --git a/Makefile b/Makefile
index 606ef7c4a544..1a2628ee5d91 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 14
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc6
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
@@ -605,10 +605,11 @@ endif
ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
stackp-flag := -fstack-protector
ifeq ($(call cc-option, $(stackp-flag)),)
- $(warning Cannot use CONFIG_CC_STACKPROTECTOR: \
- -fstack-protector not supported by compiler))
+ $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
+ -fstack-protector not supported by compiler)
endif
-else ifdef CONFIG_CC_STACKPROTECTOR_STRONG
+else
+ifdef CONFIG_CC_STACKPROTECTOR_STRONG
stackp-flag := -fstack-protector-strong
ifeq ($(call cc-option, $(stackp-flag)),)
$(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
@@ -618,6 +619,7 @@ else
# Force off for distro compilers that enable stack protector by default.
stackp-flag := $(call cc-option, -fno-stack-protector)
endif
+endif
KBUILD_CFLAGS += $(stackp-flag)
# This warning generated too much noise in a regular build.
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 6b58c1de7577..400c663b21c2 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -282,7 +282,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
#else
/* if V-P const for loop, PTAG can be written once outside loop */
if (full_page_op)
- write_aux_reg(ARC_REG_DC_PTAG, paddr);
+ write_aux_reg(aux_tag, paddr);
#endif
while (num_lines-- > 0) {
@@ -296,7 +296,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
write_aux_reg(aux_cmd, vaddr);
vaddr += L1_CACHE_BYTES;
#else
- write_aux_reg(aux, paddr);
+ write_aux_reg(aux_cmd, paddr);
paddr += L1_CACHE_BYTES;
#endif
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e25419817791..15949459611f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1578,6 +1578,7 @@ config BL_SWITCHER_DUMMY_IF
choice
prompt "Memory split"
+ depends on MMU
default VMSPLIT_3G
help
Select the desired split between kernel and user memory.
@@ -1595,6 +1596,7 @@ endchoice
config PAGE_OFFSET
hex
+ default PHYS_OFFSET if !MMU
default 0x40000000 if VMSPLIT_1G
default 0x80000000 if VMSPLIT_2G
default 0xC0000000
@@ -1903,6 +1905,7 @@ config XEN
depends on ARM && AEABI && OF
depends on CPU_V7 && !CPU_V6
depends on !GENERIC_ATOMIC64
+ depends on MMU
select ARM_PSCI
select SWIOTLB_XEN
select ARCH_DMA_ADDR_T_64BIT
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 47279aa96a6a..0714e0334e33 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,4 +1,5 @@
ashldi3.S
+bswapsdi2.S
font.c
lib1funcs.S
hyp-stub.S
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b485e0..032030361bef 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
# sama5d3
+dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
@@ -208,7 +209,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-n900.dtb \
omap3-n9.dtb \
omap3-n950.dtb \
- omap3-tobi.dtb \
+ omap3-overo-tobi.dtb \
+ omap3-overo-storm-tobi.dtb \
omap3-gta04.dtb \
omap3-igep0020.dtb \
omap3-igep0030.dtb \
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 4718ec4a4dbf..486880b74831 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -121,7 +121,7 @@
ti,model = "AM335x-EVMSK";
ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
- ti,codec-clock-rate = <24576000>;
+ ti,codec-clock-rate = <24000000>;
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
@@ -256,6 +256,12 @@
>;
};
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
@@ -456,6 +462,9 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&sham {
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 66609684d41b..9480cf891f8c 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -23,6 +23,7 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ eth3 = &eth3;
};
cpus {
@@ -291,7 +292,7 @@
interrupts = <91>;
};
- ethernet@34000 {
+ eth3: ethernet@34000 {
compatible = "marvell,armada-370-neta";
reg = <0x34000 0x4000>;
interrupts = <14>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
new file mode 100644
index 000000000000..ce1375595e5f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -0,0 +1,229 @@
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ * Copyright (C) 2014 Atmel,
+ * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+ model = "SAMA5D3 Xplained";
+ compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0000000 {
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>;
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+
+ usart0: serial@f001c000 {
+ status = "okay";
+ };
+
+ usart1: serial@f0020000 {
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+ status = "okay";
+ };
+
+ uart0: serial@f0024000 {
+ status = "okay";
+ };
+
+ mmc1: mmc@f8000000 {
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi1: spi@f8008000 {
+ cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+ status = "okay";
+ };
+
+ adc0: adc@f8018000 {
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad7
+ &pinctrl_adc0_ad8
+ &pinctrl_adc0_ad9
+ >;
+ status = "okay";
+ };
+
+ i2c2: i2c@f801c000 {
+ dmas = <0>, <0>; /* Do not use DMA for i2c2 */
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ pinctrl@fffff200 {
+ board {
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_mmc1_cd: mmc1_cd {
+ atmel,pins =
+ <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ main: mainck {
+ clock-frequency = <12000000>;
+ };
+ };
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+
+ usb0: gadget@00500000 {
+ atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00600000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioE 3 GPIO_ACTIVE_LOW
+ &pioE 4 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00700000 {
+ status = "okay";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ bp3 {
+ label = "PB_USER";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d2 {
+ label = "d2";
+ gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ d3 {
+ label = "d3";
+ gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 0042f73068b0..fece8665fb63 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -523,7 +523,7 @@
};
i2c0: i2c@fff88000 {
- compatible = "atmel,at91sam9263-i2c";
+ compatible = "atmel,at91sam9260-i2c";
reg = <0xfff88000 0x100>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index e9487f6f0166..924a6a6ffd0f 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -124,6 +124,10 @@
nand-on-flash-bbt;
status = "okay";
};
+
+ usb0: ohci@00500000 {
+ status = "okay";
+ };
};
leds {
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index e491b82f8d67..792fde1b7f75 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -147,7 +147,7 @@
};
pinctrl@35004800 {
- compatible = "brcm,capri-pinctrl";
+ compatible = "brcm,bcm11351-pinctrl";
reg = <0x35004800 0x430>;
};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 2b76524f4aa7..187fd46b7b5e 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -379,15 +379,6 @@
#clock-cells = <1>;
};
- pmu_intc: pmu-interrupt-ctrl@d0050 {
- compatible = "marvell,dove-pmu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xd0050 0x8>;
- interrupts = <33>;
- marvell,#interrupts = <7>;
- };
-
pinctrl: pin-ctrl@d0200 {
compatible = "marvell,dove-pinctrl";
reg = <0xd0200 0x10>;
@@ -610,8 +601,6 @@
rtc: real-time-clock@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
- interrupt-parent = <&pmu_intc>;
- interrupts = <5>;
};
gpio2: gpio-ctrl@e8400 {
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index fd8fc7cd53f3..5bfae54fb780 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -52,12 +52,6 @@
};
};
- codec: spdif-transmitter {
- compatible = "linux,spdif-dit";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hummingboard_spdif>;
- };
-
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
@@ -111,7 +105,7 @@
};
pinctrl_hummingboard_spdif: hummingboard-spdif {
- fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
@@ -142,6 +136,8 @@
};
&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_spdif>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 64daa3b311f6..c2a24888a276 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -46,12 +46,6 @@
};
};
- codec: spdif-transmitter {
- compatible = "linux,spdif-dit";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cubox_i_spdif>;
- };
-
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
@@ -89,7 +83,7 @@
};
pinctrl_cubox_i_spdif: cubox-i-spdif {
- fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
@@ -121,6 +115,8 @@
};
&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_spdif>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index 2363593e1050..ef58d1c24313 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -612,7 +612,7 @@ clocks {
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk13>;
clock-output-names = "vcp-3";
- reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
+ reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
reg-names = "control", "domain";
domain-id = <24>;
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index b9b55c95a566..d3b253bbc885 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -13,7 +13,7 @@
/ {
model = "OMAP3 GTA04";
- compatible = "ti,omap3-gta04", "ti,omap3";
+ compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
cpus {
cpu@0 {
@@ -32,7 +32,7 @@
aux-button {
label = "aux";
linux,code = <169>;
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
gpio-key,wakeup;
};
};
@@ -92,6 +92,8 @@
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
};
/* leds */
@@ -141,8 +143,8 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
bus-width = <4>;
+ ti,non-removable;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 25a2b5f652fd..f2779ac75872 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -14,7 +14,7 @@
/ {
model = "IGEPv2 (TI OMAP AM/DM37x)";
- compatible = "isee,omap3-igep0020", "ti,omap3";
+ compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
leds {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 145c58cfc8ac..2793749eb1ba 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -13,7 +13,7 @@
/ {
model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
- compatible = "isee,omap3-igep0030", "ti,omap3";
+ compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
leds {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index 39828ce464ee..9938b5dc1909 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -14,5 +14,5 @@
/ {
model = "Nokia N9";
- compatible = "nokia,omap3-n9", "ti,omap3";
+ compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 6fc85f963530..0bf40c90faba 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 (or later) as
@@ -13,7 +13,7 @@
/ {
model = "Nokia N900";
- compatible = "nokia,omap3-n900", "ti,omap3";
+ compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
cpus {
cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index b076a526b999..261c5589bfa3 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -14,5 +14,5 @@
/ {
model = "Nokia N950";
- compatible = "nokia,omap3-n950", "ti,omap3";
+ compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
new file mode 100644
index 000000000000..966b5c9cd96a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 7e4ad2aec37a..4edc013a91c1 100644
--- a/arch/arm/boot/dts/omap3-tobi.dts
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -13,9 +13,6 @@
#include "omap3-overo.dtsi"
/ {
- model = "TI OMAP3 Gumstix Overo on Tobi";
- compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
-
leds {
compatible = "gpio-leds";
heartbeat {
diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts
new file mode 100644
index 000000000000..de5653e1b5ca
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobi.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Tobi";
+ compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index a461d2fd1fb0..597099907f8e 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -9,9 +9,6 @@
/*
* The Gumstix Overo must be combined with an expansion board.
*/
-/dts-v1/;
-
-#include "omap34xx.dtsi"
/ {
pwmleds {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 52447c17537a..3d5faf85f51b 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1228,7 +1228,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 0c1e8d871ed1..6cb9b68e2188 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -188,7 +188,6 @@
msp2: msp@80117000 {
pinctrl-names = "default";
pinctrl-0 = <&msp2_default_mode>;
- status = "okay";
};
msp3: msp@80125000 {
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 040bb0eba152..d4d2763f4794 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -315,7 +315,7 @@
ranges;
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
@@ -323,7 +323,7 @@
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
@@ -426,7 +426,7 @@
};
rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-ts";
+ compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index ea16054857a4..79fd412005b0 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -278,7 +278,7 @@
ranges;
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
@@ -286,7 +286,7 @@
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
@@ -383,7 +383,7 @@
};
rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-ts";
+ compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 320335abfccd..c463fd730c91 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -346,7 +346,7 @@
};
rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-ts";
+ compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 119f066f0d98..6f25cf559ad0 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -340,7 +340,7 @@
ranges;
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <0 55 4>;
clocks = <&ahb_gates 17>;
@@ -348,7 +348,7 @@
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
@@ -454,7 +454,7 @@
rtc: rtc@01c20d00 {
compatible = "allwinner,sun7i-a20-rtc";
reg = <0x01c20d00 0x20>;
- interrupts = <0 24 1>;
+ interrupts = <0 24 4>;
};
sid: eeprom@01c23800 {
@@ -463,7 +463,7 @@
};
rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-ts";
+ compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <0 29 4>;
};
@@ -596,10 +596,10 @@
hstimer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
- interrupts = <0 81 1>,
- <0 82 1>,
- <0 83 1>,
- <0 84 1>;
+ interrupts = <0 81 4>,
+ <0 82 4>,
+ <0 83 4>,
+ <0 84 4>;
clocks = <&ahb_gates 28>;
};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 389e987ec281..44ec401ec366 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -57,6 +57,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -72,6 +74,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 480ecda3416b..48d2a7f4d0c0 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -94,6 +94,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -109,6 +111,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 9104224124ee..1e156d9d0506 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -28,7 +28,7 @@
compatible = "nvidia,cardhu", "nvidia,tegra30";
aliases {
- rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc0 = "/i2c@7000d000/tps65911@2d";
rtc1 = "/rtc@7000e000";
};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index ed8e7700b46d..19a84e933f4e 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -170,6 +170,8 @@
resets = <&tegra_car 27>;
reset-names = "dc";
+ nvidia,head = <0>;
+
rgb {
status = "disabled";
};
@@ -185,6 +187,8 @@
resets = <&tegra_car 26>;
reset-names = "dc";
+ nvidia,head = <1>;
+
rgb {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi
deleted file mode 100644
index 3f123ecc9dd7..000000000000
--- a/arch/arm/boot/dts/testcases/tests.dtsi
+++ /dev/null
@@ -1,2 +0,0 @@
-/include/ "tests-phandle.dtsi"
-/include/ "tests-interrupts.dtsi"
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index f43907c40c93..65f657711323 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -1,4 +1,4 @@
-/include/ "versatile-ab.dts"
+#include <versatile-ab.dts>
/ {
model = "ARM Versatile PB";
@@ -47,4 +47,4 @@
};
};
-/include/ "testcases/tests.dtsi"
+#include <testcases.dtsi>
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 845bc745706b..ee6982976d66 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -29,6 +29,7 @@ CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
+CONFIG_SOC_DRA7XX=y
CONFIG_SOC_AM43XX=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SOCFPGA=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 00fe9e9710fd..27d69b558c5d 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -204,7 +204,10 @@ CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index e9a49fe0284e..8b8b61685a34 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
static inline void __flush_icache_all(void)
{
__flush_icache_preferred();
+ dsb();
}
/*
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 8756e4bcdba0..4afb376d9c7c 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -30,14 +30,15 @@
*/
#define UL(x) _AC(x, UL)
+/* PAGE_OFFSET - the virtual address of the start of the kernel image */
+#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
+
#ifdef CONFIG_MMU
/*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
*/
-#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
#define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M)
@@ -104,10 +105,6 @@
#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
#endif
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET PLAT_PHYS_OFFSET
-#endif
-
/*
* The module can be at any place in ram in nommu mode.
*/
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 03243f7eeddf..85c60adc8b60 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -120,13 +120,16 @@
/*
* 2nd stage PTE definitions for LPAE.
*/
-#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
-#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
-#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
+#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */
+#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */
+#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */
+#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */
+#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2)
-#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
+#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
+#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
+
+#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
/*
* Hyp-mode PL2 PTE definitions for LPAE.
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index ef3c6072aa45..ac4bfae26702 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -37,18 +37,9 @@
static inline void dsb_sev(void)
{
-#if __LINUX_ARM_ARCH__ >= 7
- __asm__ __volatile__ (
- "dsb ishst\n"
- SEV
- );
-#else
- __asm__ __volatile__ (
- "mcr p15, 0, %0, c7, c10, 4\n"
- SEV
- : : "r" (0)
- );
-#endif
+
+ dsb(ishst);
+ __asm__(SEV);
}
/*
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 47cd974e57ea..c96ecacb2021 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -177,6 +177,18 @@ __lookup_processor_type_data:
.long __proc_info_end
.size __lookup_processor_type_data, . - __lookup_processor_type_data
+__error_lpae:
+#ifdef CONFIG_DEBUG_LL
+ adr r0, str_lpae
+ bl printascii
+ b __error
+str_lpae: .asciz "\nError: Kernel with LPAE support, but CPU does not support LPAE.\n"
+#else
+ b __error
+#endif
+ .align
+ENDPROC(__error_lpae)
+
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 914616e0bdcd..f5f381d91556 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -102,7 +102,7 @@ ENTRY(stext)
and r3, r3, #0xf @ extract VMSA support
cmp r3, #5 @ long-descriptor translation table format?
THUMB( it lo ) @ force fixup-able long branch encoding
- blo __error_p @ only classic page table format
+ blo __error_lpae @ only classic page table format
#endif
#ifndef CONFIG_XIP_KERNEL
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b0df9761de6d..1e8b030dbefd 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
kernel_data.end = virt_to_phys(_end - 1);
for_each_memblock(memory, region) {
- res = memblock_virt_alloc_low(sizeof(*res), 0);
+ res = memblock_virt_alloc(sizeof(*res), 0);
res->name = "System RAM";
res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 1d8248ea5669..bd18bb8b2770 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -878,7 +878,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
unsigned long cmd,
void *v)
{
- if (cmd == CPU_PM_EXIT) {
+ if (cmd == CPU_PM_EXIT &&
+ __hyp_get_vectors() == hyp_default_vectors) {
cpu_init_hyp_mode(NULL);
return NOTIFY_OK;
}
diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S
index ddc15539bad2..0d68d4073068 100644
--- a/arch/arm/kvm/interrupts.S
+++ b/arch/arm/kvm/interrupts.S
@@ -220,6 +220,10 @@ after_vfp_restore:
* in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are
* passed in r0 and r1.
*
+ * A function pointer with a value of 0xffffffff has a special meaning,
+ * and is used to implement __hyp_get_vectors in the same way as in
+ * arch/arm/kernel/hyp_stub.S.
+ *
* The calling convention follows the standard AAPCS:
* r0 - r3: caller save
* r12: caller save
@@ -363,6 +367,11 @@ hyp_hvc:
host_switch_to_hyp:
pop {r0, r1, r2}
+ /* Check for __hyp_get_vectors */
+ cmp r0, #-1
+ mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR
+ beq 1f
+
push {lr}
mrs lr, SPSR
push {lr}
@@ -378,7 +387,7 @@ THUMB( orr lr, #1)
pop {lr}
msr SPSR_csxf, lr
pop {lr}
- eret
+1: eret
guest_trap:
load_vcpu @ Load VCPU pointer to r0
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 8f4649b301b2..1abae5f6a418 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -8,7 +8,7 @@ config ARCH_HI3xxx
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
- select HAVE_ARM_TWD
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select PINCTRL
select PINCTRL_SINGLE
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index befcaf5d0574..ec419649320f 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -101,11 +101,9 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
-ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
# i.MX6SL reuses i.MX6Q code
obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
-endif
# i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index af2e582d2b74..4d677f442539 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -482,6 +482,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
if (IS_ENABLED(CONFIG_PCI_IMX6))
clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index 3781a1853998..4c86f3035205 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -266,6 +266,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
/* Audio-related clocks configuration */
clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 59c3b9b26bb4..baf439dc22d8 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -144,13 +144,11 @@ void imx6q_set_chicken_bit(void);
void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
-#ifdef CONFIG_PM
void imx6q_pm_init(void);
void imx6q_pm_set_ccm_base(void __iomem *base);
+#ifdef CONFIG_PM
void imx5_pm_init(void);
#else
-static inline void imx6q_pm_init(void) {}
-static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
static inline void imx5_pm_init(void) {}
#endif
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 9d47adc078aa..7a9b98589db7 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -236,8 +236,6 @@ void __init imx6q_pm_init(void)
regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
IMX6Q_GPR1_GINT);
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
suspend_set_ops(&imx6q_pm_ops);
}
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index ba470d64493b..3795ae28a613 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -2,7 +2,6 @@ config ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4T
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
- select DMA_OF
select USE_OF
select CLKSRC_OF
select CLKSRC_MMIO
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 91449c5cb70f..85089d821982 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 16,
.pins[0] = 6,
+ .extcon = "tahvo-usb",
};
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 653b489479e0..0af7ca02314d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -50,11 +50,12 @@ config SOC_OMAP5
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if LOCAL_TIMERS
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
@@ -63,6 +64,7 @@ config SOC_AM33XX
bool "TI AM33XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
@@ -72,6 +74,7 @@ config SOC_AM43XX
depends on ARCH_MULTI_V7
select CPU_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select MULTI_IRQ_HANDLER
select ARM_GIC
select MACH_OMAP_GENERIC
@@ -80,6 +83,7 @@ config SOC_DRA7XX
bool "TI DRA7XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
@@ -268,9 +272,6 @@ config MACH_OMAP_3430SDP
default y
select OMAP_PACKAGE_CBB
-config MACH_NOKIA_N800
- bool
-
config MACH_NOKIA_N810
bool
@@ -281,7 +282,6 @@ config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
- select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
select OMAP_PACKAGE_ZAC
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 3b05aea56d1f..11ed9152e665 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = {
.enable = &omap2_dflt_clk_enable,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
+ .set_rate = &omap3_clkoutx2_set_rate,
.recalc_rate = &omap3_clkoutx2_recalc,
+ .round_rate = &omap3_clkoutx2_round_rate,
};
static const struct clk_ops dpll4_m5x2_ck_3630_ops = {
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 4c158c838d40..01fc710c8181 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -23,6 +23,8 @@
#include "prm.h"
#include "clockdomain.h"
+#define MAX_CPUS 2
+
/* Machine specific information */
struct idle_statedata {
u32 cpu_state;
@@ -48,11 +50,11 @@ static struct idle_statedata omap4_idle_data[] = {
},
};
-static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS];
-static struct clockdomain *cpu_clkdm[NR_CPUS];
+static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS];
+static struct clockdomain *cpu_clkdm[MAX_CPUS];
static atomic_t abort_barrier;
-static bool cpu_done[NR_CPUS];
+static bool cpu_done[MAX_CPUS];
static struct idle_statedata *state_ptr = &omap4_idle_data[0];
/* Private functions */
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 3185ced807c9..3c418ea54bbe 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -623,6 +623,32 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
/* Clock control for DPLL outputs */
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+ struct clk_hw_omap *pclk = NULL;
+ struct clk *parent;
+
+ /* Walk up the parents of clk, looking for a DPLL */
+ do {
+ do {
+ parent = __clk_get_parent(hw->clk);
+ hw = __clk_get_hw(parent);
+ } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+ if (!hw)
+ break;
+ pclk = to_clk_hw_omap(hw);
+ } while (pclk && !pclk->dpll_data);
+
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return NULL;
+ }
+
+ return pclk;
+}
+
/**
* omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
* @clk: DPLL output struct clk
@@ -637,27 +663,14 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
unsigned long rate;
u32 v;
struct clk_hw_omap *pclk = NULL;
- struct clk *parent;
if (!parent_rate)
return 0;
- /* Walk up the parents of clk, looking for a DPLL */
- do {
- do {
- parent = __clk_get_parent(hw->clk);
- hw = __clk_get_hw(parent);
- } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
- if (!hw)
- break;
- pclk = to_clk_hw_omap(hw);
- } while (pclk && !pclk->dpll_data);
+ pclk = omap3_find_clkoutx2_dpll(hw);
- /* clk does not have a DPLL as a parent? error in the clock data */
- if (!pclk) {
- WARN_ON(1);
+ if (!pclk)
return 0;
- }
dd = pclk->dpll_data;
@@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
return rate;
}
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ return 0;
+}
+
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ const struct dpll_data *dd;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!*prate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
+ dd = pclk->dpll_data;
+
+ /* TYPE J does not have a clkoutx2 */
+ if (dd->flags & DPLL_J_TYPE) {
+ *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
+ return *prate;
+ }
+
+ WARN_ON(!dd->enable_mask);
+
+ v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* If in bypass, the rate is fixed to the bypass rate*/
+ if (v != OMAP3XXX_EN_DPLL_LOCKED)
+ return *prate;
+
+ if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+ unsigned long best_parent;
+
+ best_parent = (rate / 2);
+ *prate = __clk_round_rate(__clk_get_parent(hw->clk),
+ best_parent);
+ }
+
+ return *prate * 2;
+}
+
/* OMAP3/4 non-CORE DPLL clkops */
const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
.allow_idle = omap3_dpll_allow_idle,
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index d24926e6340f..ab43755364f5 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
of_property_read_bool(np, "gpmc,time-para-granularity");
}
-#ifdef CONFIG_MTD_NAND
+#if IS_ENABLED(CONFIG_MTD_NAND)
static const char * const nand_xfer_types[] = {
[NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
@@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
}
#endif
-#ifdef CONFIG_MTD_ONENAND
+#if IS_ENABLED(CONFIG_MTD_ONENAND)
static int gpmc_probe_onenand_child(struct platform_device *pdev,
struct device_node *child)
{
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index d408b15b4fbf..af432b191255 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
-#if defined(CONFIG_DEBUG_LL) && \
- (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
- {
- .virtual = ZOOM_UART_VIRT,
- .pfn = __phys_to_pfn(ZOOM_UART_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- },
-#endif
};
#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 42d81885c700..1f33f5db10d5 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1947,29 +1947,31 @@ static int _ocp_softreset(struct omap_hwmod *oh)
goto dis_opt_clks;
_write_sysconfig(v, oh);
- ret = _clear_softreset(oh, &v);
- if (ret)
- goto dis_opt_clks;
-
- _write_sysconfig(v, oh);
if (oh->class->sysc->srst_udelay)
udelay(oh->class->sysc->srst_udelay);
c = _wait_softreset_complete(oh);
- if (c == MAX_MODULE_SOFTRESET_WAIT)
+ if (c == MAX_MODULE_SOFTRESET_WAIT) {
pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
oh->name, MAX_MODULE_SOFTRESET_WAIT);
- else
+ ret = -ETIMEDOUT;
+ goto dis_opt_clks;
+ } else {
pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
+ }
+
+ ret = _clear_softreset(oh, &v);
+ if (ret)
+ goto dis_opt_clks;
+
+ _write_sysconfig(v, oh);
/*
* XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
* _wait_target_ready() or _reset()
*/
- ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
dis_opt_clks:
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
_disable_optional_clocks(oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 18f333c440db..810c205d668b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1365,11 +1365,10 @@ static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 3d5b24dcd9a4..c33e07e2f0d4 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -22,6 +22,8 @@
#include "common-board-devices.h"
#include "dss-common.h"
#include "control.h"
+#include "omap-secure.h"
+#include "soc.h"
struct pdata_init {
const char *compatible;
@@ -169,6 +171,22 @@ static void __init am3517_evm_legacy_init(void)
omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
+
+static void __init nokia_n900_legacy_init(void)
+{
+ hsmmc2_internal_input_clk();
+
+ if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+ if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
+ pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+ /* set IBE to 1 */
+ rx51_secure_update_aux_cr(BIT(6), 0);
+ } else {
+ pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
+ pr_warning("Thumb binaries may crash randomly without this workaround\n");
+ }
+ }
+}
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_ARCH_OMAP4
@@ -239,6 +257,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+ OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
@@ -259,7 +278,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
- { "nokia,omap3-n900", hsmmc2_internal_input_clk, },
+ { "nokia,omap3-n900", nokia_n900_legacy_init, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 6334b96b4097..280f3c58abe5 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void)
OMAP4_PRM_RSTCTRL_OFFSET);
v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
- OMAP4430_PRM_DEVICE_INST,
+ dev_inst,
OMAP4_PRM_RSTCTRL_OFFSET);
/* OCP barrier */
v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
- OMAP4430_PRM_DEVICE_INST,
+ dev_inst,
OMAP4_PRM_RSTCTRL_OFFSET);
}
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index c9f309ae88c5..8b90c4f2d430 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -30,6 +30,7 @@
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
+#include <mach/irqs.h>
#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 954641e6c8b1..1b0825911e62 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -14,6 +14,8 @@
#ifndef ASM_ARCH_BALLOON3_H
#define ASM_ARCH_BALLOON3_H
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
enum balloon3_features {
BALLOON3_FEATURE_OHCI,
BALLOON3_FEATURE_MMC,
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index f3c3493b468d..c030d955bbd7 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_CORGI_H
#define __ASM_ARCH_CORGI_H 1
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
/*
* Corgi (Non Standard) GPIO Definitions
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
index 2628e7b72116..00cfbbbf73f7 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -11,6 +11,8 @@
#ifndef CSB726_H
#define CSB726_H
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
#define CSB726_GPIO_IRQ_LAN 52
#define CSB726_GPIO_IRQ_SM501 53
#define CSB726_GPIO_MMC_DETECT 100
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index dba14b6503ad..f7df27bbb42e 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
/* BTRESET - Reset line to Bluetooth module, active low signal. */
#define GPIO_GUMSTIX_BTRESET 7
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index 22a96f87232b..7e63f4680271 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -23,6 +23,7 @@
* IDP hardware.
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
#define IDP_FLASH_PHYS (PXA_CS0_PHYS)
#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 2c4471336570..b184f296023b 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -13,6 +13,8 @@
#ifndef _INCLUDE_PALMLD_H_
#define _INCLUDE_PALMLD_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 0bd4f036c72f..e342c5921405 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -15,6 +15,8 @@
#ifndef _INCLUDE_PALMT5_H_
#define _INCLUDE_PALMT5_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index c383a21680b6..81c727b3cfd2 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -16,6 +16,8 @@
#ifndef _INCLUDE_PALMTC_H_
#define _INCLUDE_PALMTC_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index f2e530380253..92bc1f05300d 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -16,6 +16,8 @@
#ifndef _INCLUDE_PALMTX_H_
#define _INCLUDE_PALMTX_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 6bf28de228bd..86ebd7b6c960 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -23,6 +23,8 @@
* Definitions of CPU card resources only
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/* phyCORE-PXA270 (PCM027) Interrupts */
#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
#define PCM027_BTDET_IRQ PCM027_IRQ(0)
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index 0260aaa2fc17..7e544c14967e 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -20,6 +20,7 @@
*/
#include <mach/pcm027.h>
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
/*
* definitions relevant only when the PCM-990
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index f32ff75dcca8..b56b19351a03 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -15,6 +15,8 @@
#ifndef __ASM_ARCH_POODLE_H
#define __ASM_ARCH_POODLE_H 1
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/*
* GPIOs
*/
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 0bfe6507c95d..25c9f62e46aa 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -15,8 +15,8 @@
#define __ASM_ARCH_SPITZ_H 1
#endif
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
#include <linux/fb.h>
-#include <linux/gpio.h>
/* Spitz/Akita GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 2bb0e862598c..0497d95cef25 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -13,6 +13,8 @@
#ifndef _ASM_ARCH_TOSA_H_
#define _ASM_ARCH_TOSA_H_ 1
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
/* TOSA Chip selects */
#define TOSA_LCDC_PHYS PXA_CS4_PHYS
/* Internel Scoop */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index d2ca01053f69..ae3ca013afab 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -10,6 +10,8 @@
#ifndef _TRIPEPS4_H_
#define _TRIPEPS4_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/* physical memory regions */
#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index f70583fee59f..29997bde277d 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -38,6 +38,7 @@
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/reboot.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/max1586.h>
#include <linux/slab.h>
#include <linux/i2c/pxa-i2c.h>
@@ -714,6 +715,10 @@ static struct gpio global_gpios[] = {
{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
};
+static struct regulator_consumer_supply fixed_5v0_consumers[] = {
+ REGULATOR_SUPPLY("power", "pwm-backlight"),
+};
+
static void __init mioa701_machine_init(void)
{
int rc;
@@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void)
pxa_set_i2c_info(&i2c_pdata);
pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+
+ regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
+ ARRAY_SIZE(fixed_5v0_consumers),
+ 5000000);
}
static void mioa701_machine_exit(void)
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index f33679d2d3ee..50e1d850ee2e 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_COLLIE_H
#define __ASM_ARCH_COLLIE_H
+#include "hardware.h" /* Gives GPIO_MAX */
+
extern void locomolcd_power(int on);
#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 338640631e08..05fa505df585 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -8,7 +8,7 @@ config ARCH_SHMOBILE_MULTI
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if LOCAL_TIMERS
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 4ae0286b468d..f55b05a29b55 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -24,6 +24,7 @@
#include <linux/cpu_pm.h>
#include <linux/suspend.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/clk/tegra.h>
#include <asm/smp_plat.h>
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 303a285d80fd..6191603379e1 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -73,10 +73,20 @@ u3