diff options
| -rw-r--r-- | drivers/regulator/wm831x-dcdc.c | 52 |
1 files changed, 15 insertions, 37 deletions
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 2c5d54b026c9..bd3531d8b2ac 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -267,23 +267,6 @@ static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev, return vsel; } -static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) -{ - u16 vsel; - - if (max_uV < 600000 || max_uV > 1800000) - return -EINVAL; - - vsel = ((max_uV - 600000) / 12500) + 8; - - if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV || - wm831x_buckv_list_voltage(rdev, vsel) < max_uV) - return -EINVAL; - - return vsel; -} - static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); @@ -338,28 +321,23 @@ static int wm831x_buckv_set_voltage(struct regulator_dev *rdev, if (ret < 0) return ret; - /* Set the high voltage as the DVS voltage. This is optimised - * for CPUfreq usage, most processors will keep the maximum - * voltage constant and lower the minimum with the frequency. */ - vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV); - if (vsel < 0) { - /* This should never happen - at worst the same vsel - * should be chosen */ - WARN_ON(vsel < 0); - return 0; + /* + * If this VSEL is higher than the last one we've seen then + * remember it as the DVS VSEL. This is optimised for CPUfreq + * usage where we want to get to the highest voltage very + * quickly. + */ + if (vsel > dcdc->dvs_vsel) { + ret = wm831x_set_bits(wm831x, dvs_reg, + WM831X_DC1_DVS_VSEL_MASK, + dcdc->dvs_vsel); + if (ret == 0) + dcdc->dvs_vsel = vsel; + else + dev_warn(wm831x->dev, + "Failed to set DCDC DVS VSEL: %d\n", ret); } - /* Don't bother if it's the same VSEL we're already using */ - if (vsel == dcdc->on_vsel) - return 0; - - ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel); - if (ret == 0) - dcdc->dvs_vsel = vsel; - else - dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n", - ret); - return 0; } |