aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/mn10300/ABI.txt149
-rw-r--r--Documentation/mn10300/compartmentalisation.txt60
-rw-r--r--MAINTAINERS9
-rw-r--r--arch/mn10300/Kconfig381
-rw-r--r--arch/mn10300/Kconfig.debug135
-rw-r--r--arch/mn10300/Makefile135
-rw-r--r--arch/mn10300/boot/.gitignore1
-rw-r--r--arch/mn10300/boot/Makefile28
-rw-r--r--arch/mn10300/boot/compressed/Makefile22
-rw-r--r--arch/mn10300/boot/compressed/head.S86
-rw-r--r--arch/mn10300/boot/compressed/misc.c429
-rw-r--r--arch/mn10300/boot/compressed/misc.h18
-rw-r--r--arch/mn10300/boot/compressed/vmlinux.lds9
-rw-r--r--arch/mn10300/boot/install.sh67
-rw-r--r--arch/mn10300/boot/tools/build.c190
-rw-r--r--arch/mn10300/configs/asb2303_defconfig555
-rw-r--r--arch/mn10300/kernel/Makefile27
-rw-r--r--arch/mn10300/kernel/asm-offsets.c108
-rw-r--r--arch/mn10300/kernel/entry.S721
-rw-r--r--arch/mn10300/kernel/fpu-low.S197
-rw-r--r--arch/mn10300/kernel/fpu.c223
-rw-r--r--arch/mn10300/kernel/gdb-cache.S105
-rw-r--r--arch/mn10300/kernel/gdb-io-serial-low.S90
-rw-r--r--arch/mn10300/kernel/gdb-io-serial.c155
-rw-r--r--arch/mn10300/kernel/gdb-io-ttysm-low.S93
-rw-r--r--arch/mn10300/kernel/gdb-io-ttysm.c299
-rw-r--r--arch/mn10300/kernel/gdb-low.S115
-rw-r--r--arch/mn10300/kernel/gdb-stub.c1947
-rw-r--r--arch/mn10300/kernel/head.S255
-rw-r--r--arch/mn10300/kernel/init_task.c45
-rw-r--r--arch/mn10300/kernel/internal.h20
-rw-r--r--arch/mn10300/kernel/io.c30
-rw-r--r--arch/mn10300/kernel/irq.c235
-rw-r--r--arch/mn10300/kernel/kernel_execve.S37
-rw-r--r--arch/mn10300/kernel/kprobes.c653
-rw-r--r--arch/mn10300/kernel/kthread.S31
-rw-r--r--arch/mn10300/kernel/mn10300-debug.c58
-rw-r--r--arch/mn10300/kernel/mn10300-serial-low.S191
-rw-r--r--arch/mn10300/kernel/mn10300-serial.c1480
-rw-r--r--arch/mn10300/kernel/mn10300-serial.h126
-rw-r--r--arch/mn10300/kernel/mn10300-watchdog-low.S59
-rw-r--r--arch/mn10300/kernel/mn10300-watchdog.c183
-rw-r--r--arch/mn10300/kernel/mn10300_ksyms.c37
-rw-r--r--arch/mn10300/kernel/module.c206
-rw-r--r--arch/mn10300/kernel/process.c297
-rw-r--r--arch/mn10300/kernel/profile-low.S72
-rw-r--r--arch/mn10300/kernel/profile.c51
-rw-r--r--arch/mn10300/kernel/ptrace.c379
-rw-r--r--arch/mn10300/kernel/rtc.c173
-rw-r--r--arch/mn10300/kernel/semaphore.c149
-rw-r--r--arch/mn10300/kernel/setup.c298
-rw-r--r--arch/mn10300/kernel/sigframe.h33
-rw-r--r--arch/mn10300/kernel/signal.c564
-rw-r--r--arch/mn10300/kernel/switch_to.S71
-rw-r--r--arch/mn10300/kernel/sys_mn10300.c193
-rw-r--r--arch/mn10300/kernel/time.c129
-rw-r--r--arch/mn10300/kernel/traps.c619
-rw-r--r--arch/mn10300/kernel/vmlinux.lds.S159
-rw-r--r--arch/mn10300/lib/Makefile7
-rw-r--r--arch/mn10300/lib/__ashldi3.S51
-rw-r--r--arch/mn10300/lib/__ashrdi3.S52
-rw-r--r--arch/mn10300/lib/__lshrdi3.S52
-rw-r--r--arch/mn10300/lib/ashrdi3.c61
-rw-r--r--arch/mn10300/lib/bitops.c51
-rw-r--r--arch/mn10300/lib/checksum.c99
-rw-r--r--arch/mn10300/lib/delay.c50
-rw-r--r--arch/mn10300/lib/do_csum.S162
-rw-r--r--arch/mn10300/lib/internal.h15
-rw-r--r--arch/mn10300/lib/lshrdi3.c60
-rw-r--r--arch/mn10300/lib/memcpy.S135
-rw-r--r--arch/mn10300/lib/memmove.S160
-rw-r--r--arch/mn10300/lib/memset.S121
-rw-r--r--arch/mn10300/lib/negdi2.c57
-rw-r--r--arch/mn10300/lib/usercopy.c166
-rw-r--r--arch/mn10300/mm/Makefile14
-rw-r--r--arch/mn10300/mm/cache-flush-mn10300.S192
-rw-r--r--arch/mn10300/mm/cache-mn10300.S289
-rw-r--r--arch/mn10300/mm/cache.c121
-rw-r--r--arch/mn10300/mm/dma-alloc.c56
-rw-r--r--arch/mn10300/mm/extable.c26
-rw-r--r--arch/mn10300/mm/fault.c405
-rw-r--r--arch/mn10300/mm/init.c160
-rw-r--r--arch/mn10300/mm/misalignment.c661
-rw-r--r--arch/mn10300/mm/mmu-context.c80
-rw-r--r--arch/mn10300/mm/pgtable.c197
-rw-r--r--arch/mn10300/mm/tlb-mn10300.S207
-rw-r--r--arch/mn10300/oprofile/Kconfig23
-rw-r--r--arch/mn10300/oprofile/Makefile13
-rw-r--r--arch/mn10300/oprofile/op_model_null.c22
-rw-r--r--arch/mn10300/proc-mn103e010/Makefile5
-rw-r--r--arch/mn10300/proc-mn103e010/proc-init.c75
-rw-r--r--arch/mn10300/unit-asb2303/Makefile6
-rw-r--r--arch/mn10300/unit-asb2303/leds.c52
-rw-r--r--arch/mn10300/unit-asb2303/smc91111.c52
-rw-r--r--arch/mn10300/unit-asb2303/unit-init.c60
-rw-r--r--arch/mn10300/unit-asb2305/Makefile8
-rw-r--r--arch/mn10300/unit-asb2305/leds.c124
-rw-r--r--arch/mn10300/unit-asb2305/pci-asb2305.c303
-rw-r--r--arch/mn10300/unit-asb2305/pci-asb2305.h82
-rw-r--r--arch/mn10300/unit-asb2305/pci-iomap.c31
-rw-r--r--arch/mn10300/unit-asb2305/pci-irq.c51
-rw-r--r--arch/mn10300/unit-asb2305/pci.c545
-rw-r--r--arch/mn10300/unit-asb2305/unit-init.c61
-rw-r--r--drivers/input/joystick/analog.c6
-rw-r--r--drivers/net/Kconfig3
-rw-r--r--drivers/net/smc91x.h12
-rw-r--r--drivers/parport/Kconfig3
-rw-r--r--drivers/pci/Makefile1
-rw-r--r--drivers/video/console/Kconfig2
-rw-r--r--include/asm-mn10300/.gitignore2
-rw-r--r--include/asm-mn10300/Kbuild5
-rw-r--r--include/asm-mn10300/atomic.h166
-rw-r--r--include/asm-mn10300/auxvec.h4
-rw-r--r--include/asm-mn10300/bitops.h229
-rw-r--r--include/asm-mn10300/bug.h35
-rw-r--r--include/asm-mn10300/bugs.h20
-rw-r--r--include/asm-mn10300/busctl-regs.h151
-rw-r--r--include/asm-mn10300/byteorder.h46
-rw-r--r--include/asm-mn10300/cache.h54
-rw-r--r--include/asm-mn10300/cacheflush.h116
-rw-r--r--include/asm-mn10300/checksum.h86
-rw-r--r--include/asm-mn10300/cpu-regs.h290
-rw-r--r--include/asm-mn10300/cputime.h1
-rw-r--r--include/asm-mn10300/current.h37
-rw-r--r--include/asm-mn10300/delay.h19
-rw-r--r--include/asm-mn10300/device.h1
-rw-r--r--include/asm-mn10300/div64.h103
-rw-r--r--include/asm-mn10300/dma-mapping.h234
-rw-r--r--include/asm-mn10300/dma.h118
-rw-r--r--include/asm-mn10300/dmactl-regs.h101
-rw-r--r--include/asm-mn10300/elf.h147
-rw-r--r--include/asm-mn10300/emergency-restart.h1
-rw-r--r--include/asm-mn10300/errno.h1
-rw-r--r--include/asm-mn10300/exceptions.h121
-rw-r--r--include/asm-mn10300/fb.h23
-rw-r--r--include/asm-mn10300/fcntl.h1
-rw-r--r--include/asm-mn10300/fpu.h85
-rw-r--r--include/asm-mn10300/frame.inc91
-rw-r--r--include/asm-mn10300/futex.h1
-rw-r--r--include/asm-mn10300/gdb-stub.h183
-rw-r--r--include/asm-mn10300/hardirq.h48
-rw-r--r--include/asm-mn10300/highmem.h114
-rw-r--r--include/asm-mn10300/hw_irq.h14
-rw-r--r--include/asm-mn10300/ide.h43
-rw-r--r--include/asm-mn10300/intctl-regs.h73
-rw-r--r--include/asm-mn10300/io.h299
-rw-r--r--include/asm-mn10300/ioctl.h1
-rw-r--r--include/asm-mn10300/ioctls.h88
-rw-r--r--include/asm-mn10300/ipc.h1
-rw-r--r--include/asm-mn10300/ipcbuf.h29
-rw-r--r--include/asm-mn10300/irq.h32
-rw-r--r--include/asm-mn10300/irq_regs.h24
-rw-r--r--include/asm-mn10300/kdebug.h22
-rw-r--r--include/asm-mn10300/kmap_types.h31
-rw-r--r--include/asm-mn10300/kprobes.h50
-rw-r--r--include/asm-mn10300/linkage.h22
-rw-r--r--include/asm-mn10300/local.h1
-rw-r--r--include/asm-mn10300/mc146818rtc.h1
-rw-r--r--include/asm-mn10300/mman.h28
-rw-r--r--include/asm-mn10300/mmu.h19
-rw-r--r--include/asm-mn10300/mmu_context.h138
-rw-r--r--include/asm-mn10300/module.h27
-rw-r--r--include/asm-mn10300/msgbuf.h31
-rw-r--r--include/asm-mn10300/mutex.h16
-rw-r--r--include/asm-mn10300/namei.h22
-rw-r--r--include/asm-mn10300/nmi.h14
-rw-r--r--include/asm-mn10300/page.h131
-rw-r--r--include/asm-mn10300/page_offset.h11
-rw-r--r--include/asm-mn10300/param.h34
-rw-r--r--include/asm-mn10300/pci.h133
-rw-r--r--include/asm-mn10300/percpu.h1
-rw-r--r--include/asm-mn10300/pgalloc.h56
-rw-r--r--include/asm-mn10300/pgtable.h489
-rw-r--r--include/asm-mn10300/pio-regs.h233
-rw-r--r--include/asm-mn10300/poll.h1
-rw-r--r--include/asm-mn10300/posix_types.h132
-rw-r--r--include/asm-mn10300/proc-mn103e010/cache.h33
-rw-r--r--include/asm-mn10300/proc-mn103e010/clock.h18
-rw-r--r--include/asm-mn10300/proc-mn103e010/irq.h34
-rw-r--r--include/asm-mn10300/proc-mn103e010/proc.h18
-rw-r--r--include/asm-mn10300/processor.h186
-rw-r--r--include/asm-mn10300/ptrace.h99
-rw-r--r--include/asm-mn10300/reset-regs.h64
-rw-r--r--include/asm-mn10300/resource.h1
-rw-r--r--include/asm-mn10300/rtc-regs.h86
-rw-r--r--include/asm-mn10300/rtc.h41
-rw-r--r--include/asm-mn10300/scatterlist.h46
-rw-r--r--include/asm-mn10300/sections.h1
-rw-r--r--include/asm-mn10300/semaphore.h169
-rw-r--r--include/asm-mn10300/sembuf.h25
-rw-r--r--include/asm-mn10300/serial-regs.h160
-rw-r--r--include/asm-mn10300/serial.h36
-rw-r--r--include/asm-mn10300/setup.h17
-rw-r--r--include/asm-mn10300/shmbuf.h42
-rw-r--r--include/asm-mn10300/shmparam.h6
-rw-r--r--include/asm-mn10300/sigcontext.h52
-rw-r--r--include/asm-mn10300/siginfo.h1
-rw-r--r--include/asm-mn10300/signal.h171
-rw-r--r--include/asm-mn10300/smp.h18
-rw-r--r--include/asm-mn10300/socket.h55
-rw-r--r--include/asm-mn10300/sockios.h13
-rw-r--r--include/asm-mn10300/spinlock.h16
-rw-r--r--include/asm-mn10300/stat.h78
-rw-r--r--include/asm-mn10300/statfs.h1
-rw-r--r--include/asm-mn10300/string.h32
-rw-r--r--include/asm-mn10300/system.h237
-rw-r--r--include/asm-mn10300/termbits.h200
-rw-r--r--include/asm-mn10300/termios.h92
-rw-r--r--include/asm-mn10300/thread_info.h168
-rw-r--r--include/asm-mn10300/timer-regs.h293
-rw-r--r--include/asm-mn10300/timex.h33
-rw-r--r--include/asm-mn10300/tlb.h34
-rw-r--r--include/asm-mn10300/tlbflush.h80
-rw-r--r--include/asm-mn10300/topology.h1
-rw-r--r--include/asm-mn10300/types.h67
-rw-r--r--include/asm-mn10300/uaccess.h490
-rw-r--r--include/asm-mn10300/ucontext.h22
-rw-r--r--include/asm-mn10300/unaligned.h136
-rw-r--r--include/asm-mn10300/unistd.h384
-rw-r--r--include/asm-mn10300/unit-asb2303/clock.h45
-rw-r--r--include/asm-mn10300/unit-asb2303/leds.h43
-rw-r--r--include/asm-mn10300/unit-asb2303/serial.h136
-rw-r--r--include/asm-mn10300/unit-asb2303/smc91111.h50
-rw-r--r--include/asm-mn10300/unit-asb2303/timex.h135
-rw-r--r--include/asm-mn10300/unit-asb2305/clock.h45
-rw-r--r--include/asm-mn10300/unit-asb2305/leds.h51
-rw-r--r--include/asm-mn10300/unit-asb2305/serial.h120
-rw-r--r--include/asm-mn10300/unit-asb2305/timex.h135
-rw-r--r--include/asm-mn10300/user.h53
-rw-r--r--include/asm-mn10300/vga.h17
-rw-r--r--include/asm-mn10300/xor.h1
-rw-r--r--include/linux/elf-em.h3
-rw-r--r--include/linux/kernel.h1
-rw-r--r--lib/Kconfig.debug7
234 files changed, 27906 insertions, 7 deletions
diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt
new file mode 100644
index 000000000000..1fef1f06dfd2
--- /dev/null
+++ b/Documentation/mn10300/ABI.txt
@@ -0,0 +1,149 @@
+ =========================
+ MN10300 FUNCTION CALL ABI
+ =========================
+
+=======
+GENERAL
+=======
+
+The MN10300/AM33 kernel runs in little-endian mode; big-endian mode is not
+supported.
+
+The stack grows downwards, and should always be 32-bit aligned. There are
+separate stack pointer registers for userspace and the kernel.
+
+
+================
+ARGUMENT PASSING
+================
+
+The first two arguments (assuming up to 32-bits per argument) to a function are
+passed in the D0 and D1 registers respectively; all other arguments are passed
+on the stack.
+
+If 64-bit arguments are being passed, then they are never split between
+registers and the stack. If the first argument is a 64-bit value, it will be
+passed in D0:D1. If the first argument is not a 64-bit value, but the second
+is, the second will be passed entirely on the stack and D1 will be unused.
+
+Arguments smaller than 32-bits are not coelesced within a register or a stack
+word. For example, two byte-sized arguments will always be passed in separate
+registers or word-sized stack slots.
+
+
+=================
+CALLING FUNCTIONS
+=================
+
+The caller must allocate twelve bytes on the stack for the callee's use before
+it inserts a CALL instruction. The CALL instruction will write into the TOS
+word, but won't actually modify the stack pointer; similarly, the RET
+instruction reads from the TOS word of the stack, but doesn't move the stack
+pointer beyond it.
+
+
+ Stack:
+ | |
+ | |
+ |---------------| SP+20
+ | 4th Arg |
+ |---------------| SP+16
+ | 3rd Arg |
+ |---------------| SP+12
+ | D1 Save Slot |
+ |---------------| SP+8
+ | D0 Save Slot |
+ |---------------| SP+4
+ | Return Addr |
+ |---------------| SP
+ | |
+ | |
+
+
+The caller must leave space on the stack (hence an allocation of twelve bytes)
+in which the callee may store the first two arguments.
+
+
+============
+RETURN VALUE
+============
+
+The return value is passed in D0 for an integer (or D0:D1 for a 64-bit value),
+or A0 for a pointer.
+
+If the return value is a value larger than 64-bits, or is a structure or an
+array, then a hidden first argument will be passed to the callee by the caller:
+this will point to a piece of memory large enough to hold the result of the
+function. In this case, the callee will return the value in that piece of
+memory, and no value will be returned in D0 or A0.
+
+
+===================
+REGISTER CLOBBERING
+===================
+
+The values in certain registers may be clobbered by the callee, and other
+values must be saved:
+
+ Clobber: D0-D1, A0-A1, E0-E3
+ Save: D2-D3, A2-A3, E4-E7, SP
+
+All other non-supervisor-only registers are clobberable (such as MDR, MCRL,
+MCRH).
+
+
+=================
+SPECIAL REGISTERS
+=================
+
+Certain ordinary registers may carry special usage for the compiler:
+
+ A3: Frame pointer
+ E2: TLS pointer
+
+
+==========
+KERNEL ABI
+==========
+
+The kernel may use a slightly different ABI internally.
+
+ (*) E2
+
+ If CONFIG_MN10300_CURRENT_IN_E2 is defined, then the current task pointer
+ will be kept in the E2 register, and that register will be marked
+ unavailable for the compiler to use as a scratch register.
+
+ Normally the kernel uses something like:
+
+ MOV SP,An
+ AND 0xFFFFE000,An
+ MOV (An),Rm // Rm holds current
+ MOV (yyy,Rm) // Access current->yyy
+
+ To find the address of current; but since this option permits current to
+ be carried globally in an register, it can use:
+
+ MOV (yyy,E2) // Access current->yyy
+
+ instead.
+
+
+===============
+SYSTEM CALL ABI
+===============
+
+System calls are called with the following convention:
+
+ REGISTER ENTRY EXIT
+ =============== ======================= =======================
+ D0 Syscall number Return value
+ A0 1st syscall argument Saved
+ D1 2nd syscall argument Saved
+ A3 3rd syscall argument Saved
+ A2 4th syscall argument Saved
+ D3 5th syscall argument Saved
+ D2 6th syscall argument Saved
+
+All other registers are saved. The layout is a consequence of the way the MOVM
+instruction stores registers onto the stack.
diff --git a/Documentation/mn10300/compartmentalisation.txt b/Documentation/mn10300/compartmentalisation.txt
new file mode 100644
index 000000000000..8958b51dac4b
--- /dev/null
+++ b/Documentation/mn10300/compartmentalisation.txt
@@ -0,0 +1,60 @@
+ =========================================
+ PART-SPECIFIC SOURCE COMPARTMENTALISATION
+ =========================================
+
+The sources for various parts are compartmentalised at two different levels:
+
+ (1) Processor level
+
+ The "processor level" is a CPU core plus the other on-silicon
+ peripherals.
+
+ Processor-specific header files are divided among directories in a similar
+ way to the CPU level:
+
+ (*) include/asm-mn10300/proc-mn103e010/
+
+ Support for the AM33v2 CPU core.
+
+ The appropriate processor is selected by a CONFIG_MN10300_PROC_YYYY option
+ from the "Processor support" choice menu in the arch/mn10300/Kconfig file.
+
+
+ (2) Unit level
+
+ The "unit level" is a processor plus all the external peripherals
+ controlled by that processor.
+
+ Unit-specific header files are divided among directories in a similar way
+ to the CPU level; not only that, but specific sources may also be
+ segregated into separate directories under the arch directory:
+
+ (*) include/asm-mn10300/unit-asb2303/
+ (*) arch/mn10300/unit-asb2303/
+
+ Support for the ASB2303 board with an ASB2308 daughter board.
+
+ (*) include/asm-mn10300/unit-asb2305/
+ (*) arch/mn10300/unit-asb2305/
+
+ Support for the ASB2305 board.
+
+ The appropriate processor is selected by a CONFIG_MN10300_UNIT_ZZZZ option
+ from the "Unit type" choice menu in the arch/mn10300/Kconfig file.
+
+
+============
+COMPILE TIME
+============
+
+When the kernel is compiled, symbolic links will be made in the asm header file
+directory for this arch:
+
+ include/asm-mn10300/proc => include/asm-mn10300/proc-YYYY/
+ include/asm-mn10300/unit => include/asm-mn10300/unit-ZZZZ/
+
+So that the header files contained in those directories can be accessed without
+lots of #ifdef-age.
+
+The appropriate arch/mn10300/unit-ZZZZ directory will also be entered by the
+compilation process; all other unit-specific directories will be ignored.
diff --git a/MAINTAINERS b/MAINTAINERS
index 2cdb591ac080..a7e6ef3dae16 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2614,6 +2614,15 @@ L: linux-kernel@vger.kernel.org
W: http://www.linux-mm.org
S: Maintained
+MEI MN10300/AM33 PORT
+P: David Howells
+M: dhowells@redhat.com
+P: Koichi Yasutake
+M: yasutake.koichi@jp.panasonic.com
+L: linux-am33-list@redhat.com
+W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
+S: Maintained
+
MEMORY TECHNOLOGY DEVICES (MTD)
P: David Woodhouse
M: dwmw2@infradead.org
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
new file mode 100644
index 000000000000..eedc3a5e0d9b
--- /dev/null
+++ b/arch/mn10300/Kconfig
@@ -0,0 +1,381 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config MN10300
+ def_bool y
+
+config AM33
+ def_bool y
+
+config MMU
+ def_bool y
+
+config HIGHMEM
+ def_bool n
+
+config NUMA
+ def_bool n
+
+config UID16
+ def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_FIND_NEXT_BIT
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_TIME
+ def_bool y
+
+config GENERIC_BUG
+ def_bool y
+
+config QUICKLIST
+ def_bool y
+
+config ARCH_HAS_ILOG2_U32
+ def_bool y
+
+config ARCH_SUPPORTS_AOUT
+ def_bool n
+
+# Use the generic interrupt handling code in kernel/irq/
+config GENERIC_HARDIRQS
+ def_bool y
+
+config HOTPLUG_CPU
+ def_bool n
+
+mainmenu "Matsushita MN10300/AM33 Kernel Configuration"
+
+source "init/Kconfig"
+
+
+menu "Matsushita MN10300 system setup"
+
+choice
+ prompt "Unit type"
+ default MN10300_UNIT_ASB2303
+ help
+ This option specifies board for which the kernel will be
+ compiled. It affects the external peripherals catered for.
+
+config MN10300_UNIT_ASB2303
+ bool "ASB2303"
+
+config MN10300_UNIT_ASB2305
+ bool "ASB2305"
+
+endchoice
+
+choice
+ prompt "Processor support"
+ default MN10300_PROC_MN103E010
+ help
+ This option specifies the processor for which the kernel will be
+ compiled. It affects the on-chip peripherals catered for.
+
+config MN10300_PROC_MN103E010
+ bool "MN103E010"
+ depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
+ select MN10300_PROC_HAS_TTYSM0
+ select MN10300_PROC_HAS_TTYSM1
+ select MN10300_PROC_HAS_TTYSM2
+
+endchoice
+
+choice
+ prompt "Processor core support"
+ default MN10300_CPU_AM33V2
+ help
+ This option specifies the processor core for which the kernel will be
+ compiled. It affects the instruction set used.
+
+config MN10300_CPU_AM33V2
+ bool "AM33v2"
+
+endchoice
+
+config FPU
+ bool "FPU present"
+ default y
+ depends on MN10300_PROC_MN103E010
+
+choice
+ prompt "CPU Caching mode"
+ default MN10300_CACHE_WBACK
+ help
+ This option determines the caching mode for the kernel.
+
+ Write-Back caching mode involves the all reads and writes causing
+ the affected cacheline to be read into the cache first before being
+ operated upon. Memory is not then updated by a write until the cache
+ is filled and a cacheline needs to be displaced from the cache to
+ make room. Only at that point is it written back.
+
+ Write-Through caching only fetches cachelines from memory on a
+ read. Writes always get written directly to memory. If the affected
+ cacheline is also in cache, it will be updated too.
+
+ The final option is to turn of caching entirely.
+
+config MN10300_CACHE_WBACK
+ bool "Write-Back"
+
+config MN10300_CACHE_WTHRU
+ bool "Write-Through"
+
+config MN10300_CACHE_DISABLED
+ bool "Disabled"
+
+endchoice
+
+menu "Memory layout options"
+
+config KERNEL_RAM_BASE_ADDRESS
+ hex "Base address of kernel RAM"
+ default "0x90000000"
+
+config INTERRUPT_VECTOR_BASE
+ hex "Base address of vector table"
+ default "0x90000000"
+ help
+ The base address of the vector table will be programmed into
+ the TBR register. It must be on 16MiB address boundary.
+
+config KERNEL_TEXT_ADDRESS
+ hex "Base address of kernel"
+ default "0x90001000"
+
+config KERNEL_ZIMAGE_BASE_ADDRESS
+ hex "Base address of compressed vmlinux image"
+ default "0x90700000"
+
+endmenu
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config PREEMPT_BKL
+ bool "Preempt The Big Kernel Lock"
+ depends on PREEMPT
+ default y
+ help
+ This option reduces the latency of the kernel by making the
+ big kernel lock preemptible.
+
+ Say Y here if you are building a kernel for a desktop system.
+ Say N if you are unsure.
+
+config MN10300_CURRENT_IN_E2
+ bool "Hold current task address in E2 register"
+ default y
+ help
+ This option removes the E2/R2 register from the set available to gcc
+ for normal use and instead uses it to store the address of the
+ current process's task_struct whilst in the kernel.
+
+ This means the kernel doesn't need to calculate the address each time
+ "current" is used (take SP, AND with mask and dereference pointer
+ just to get the address), and instead can just use E2+offset
+ addressing each time.
+
+ This has no effect on userspace.
+
+config MN10300_USING_JTAG
+ bool "Using JTAG to debug kernel"
+ default y
+ help
+ This options indicates that JTAG will be used to debug the kernel. It
+ suppresses the use of certain hardware debugging features, such as
+ single-stepping, which are taken over completely by the JTAG unit.
+
+config MN10300_RTC
+ bool "Using MN10300 RTC"
+ depends on MN10300_PROC_MN103E010
+ default n
+ help
+
+ This option enables support for the RTC, thus enabling time to be
+ tracked, even when system is powered down. This is available on-chip
+ on the MN103E010.
+
+config MN10300_WD_TIMER
+ bool "Using MN10300 watchdog timer"
+ default y
+ help
+ This options indicates that the watchdog timer will be used.
+
+config PCI
+ bool "Use PCI"
+ depends on MN10300_UNIT_ASB2305
+ default y
+ help
+ Some systems (such as the ASB2305) have PCI onboard. If you have one
+ of these boards and you wish to use the PCI facilities, say Y here.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+menu "MN10300 internal serial options"
+
+config MN10300_PROC_HAS_TTYSM0
+ bool
+ default n
+
+config MN10300_PROC_HAS_TTYSM1
+ bool
+ default n
+
+config MN10300_PROC_HAS_TTYSM2
+ bool
+ default n
+
+config MN10300_TTYSM
+ bool "Support for ttySM serial ports"
+ depends on MN10300
+ default y
+ select SERIAL_CORE
+ help
+ This option enables support for the on-chip serial ports that the
+ MN10300 has available.
+
+config MN10300_TTYSM_CONSOLE
+ bool "Support for console on ttySM serial ports"
+ depends on MN10300_TTYSM
+ select SERIAL_CORE_CONSOLE
+ help
+ This option enables support for a console on the on-chip serial ports
+ that the MN10300 has available.
+
+#
+# /dev/ttySM0
+#
+config MN10300_TTYSM0
+ bool "Enable SIF0 (/dev/ttySM0)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
+ help
+ Enable access to SIF0 through /dev/ttySM0 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF0"
+ default MN10300_TTYSM0_TIMER8
+ depends on MN10300_TTYSM0
+
+config MN10300_TTYSM0_TIMER8
+ bool "Use timer 8 (16-bit)"
+
+config MN10300_TTYSM0_TIMER2
+ bool "Use timer 2 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM1
+#
+config MN10300_TTYSM1
+ bool "Enable SIF1 (/dev/ttySM1)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
+ help
+ Enable access to SIF1 through /dev/ttySM1 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF1"
+ default MN10300_TTYSM0_TIMER9
+ depends on MN10300_TTYSM1
+
+config MN10300_TTYSM1_TIMER9
+ bool "Use timer 9 (16-bit)"
+
+config MN10300_TTYSM1_TIMER3
+ bool "Use timer 3 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM2
+#
+config MN10300_TTYSM2
+ bool "Enable SIF2 (/dev/ttySM2)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
+ help
+ Enable access to SIF2 through /dev/ttySM2 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF2"
+ default MN10300_TTYSM0_TIMER10
+ depends on MN10300_TTYSM2
+
+config MN10300_TTYSM2_TIMER10
+ bool "Use timer 10 (16-bit)"
+
+endchoice
+
+config MN10300_TTYSM2_CTS
+ bool "Enable the use of the CTS line /dev/ttySM2"
+ depends on MN10300_TTYSM2
+
+endmenu
+
+source "mm/Kconfig"
+
+menu "Power management options"
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/mn10300/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+source "arch/mn10300/oprofile/Kconfig"
diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
new file mode 100644
index 000000000000..524e33819f32
--- /dev/null
+++ b/arch/mn10300/Kconfig.debug
@@ -0,0 +1,135 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL
+
+config DEBUG_DECOMPRESS_KERNEL
+ bool "Using serial port during decompressing kernel"
+ depends on DEBUG_KERNEL
+ default n
+ help
+ If you say Y here you will confirm the start and the end of
+ decompressing Linux seeing "Uncompressing Linux... " and
+ "Ok, booting the kernel.\n" on console.
+
+config KPROBES
+ bool "Kprobes"
+ depends on DEBUG_KERNEL
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+
+config GDBSTUB
+ bool "Remote GDB kernel debugging"
+ depends on DEBUG_KERNEL
+ select DEBUG_INFO
+ select FRAME_POINTER
+ help
+ If you say Y here, it will be possible to remotely debug the kernel
+ using gdb. This enlarges your kernel ELF image disk size by several
+ megabytes and requires a machine with more than 16 MB, better 32 MB
+ RAM to avoid excessive linking time. This is only useful for kernel
+ hackers. If unsure, say N.
+
+config GDBSTUB_IMMEDIATE
+ bool "Break into GDB stub immediately"
+ depends on GDBSTUB
+ help
+ If you say Y here, GDB stub will break into the program as soon as
+ possible, leaving the program counter at the beginning of
+ start_kernel() in init/main.c.
+
+config GDB_CONSOLE
+ bool "Console output to GDB"
+ depends on GDBSTUB
+ help
+ If you are using GDB for remote debugging over a serial port and
+ would like kernel messages to be formatted into GDB $O packets so
+ that GDB prints them as program output, say 'Y'.
+
+config GDBSTUB_DEBUGGING
+ bool "Debug GDB stub by messages to serial port"
+ depends on GDBSTUB
+ help
+ This causes debugging messages to be displayed at various points
+ during execution of the GDB stub routines. Such messages will be
+ displayed on ttyS0 if that isn't the GDB stub's port, or ttySM0
+ otherwise.
+
+config GDBSTUB_DEBUG_ENTRY
+ bool "Debug GDB stub entry"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about entry to or exit
+ from the main GDB stub routine.
+
+config GDBSTUB_DEBUG_PROTOCOL
+ bool "Debug GDB stub protocol"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about the GDB remote
+ protocol messages generated exchanged with GDB.
+
+config GDBSTUB_DEBUG_IO
+ bool "Debug GDB stub I/O"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about GDB stub's
+ low-level I/O.
+
+config GDBSTUB_DEBUG_BREAKPOINT
+ bool "Debug GDB stub breakpoint management"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about GDB stub's
+ breakpoint management.
+
+choice
+ prompt "GDB stub port"
+ default GDBSTUB_TTYSM0
+ depends on GDBSTUB
+ help
+ Select the serial port used for GDB-stub.
+
+config GDBSTUB_ON_TTYSM0
+ bool "/dev/ttySM0 [SIF0]"
+ depends on MN10300_TTYSM0
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYSM1
+ bool "/dev/ttySM1 [SIF1]"
+ depends on MN10300_TTYSM1
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYSM2
+ bool "/dev/ttySM2 [SIF2]"
+ depends on MN10300_TTYSM2
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYS0
+ bool "/dev/ttyS0"
+ select GDBSTUB_ON_TTYSx
+
+config GDBSTUB_ON_TTYS1
+ bool "/dev/ttyS1"
+ select GDBSTUB_ON_TTYSx
+
+endchoice
+
+config GDBSTUB_ON_TTYSMx
+ bool
+ depends on GDBSTUB_ON_TTYSM0 || GDBSTUB_ON_TTYSM1 || GDBSTUB_ON_TTYSM2
+ default y
+
+config GDBSTUB_ON_TTYSx
+ bool
+ depends on GDBSTUB_ON_TTYS0 || GDBSTUB_ON_TTYS1
+ default y
+
+endmenu
diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile
new file mode 100644
index 000000000000..6673a28ec07a
--- /dev/null
+++ b/arch/mn10300/Makefile
@@ -0,0 +1,135 @@
+###############################################################################
+#
+# MN10300 Kernel makefile system specifications
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+
+KBUILD_DEFCONFIG := asb2303_defconfig
+
+CCSPECS := $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-)
+CCDIR := $(strip $(patsubst %/specs,%,$(CCSPECS)))
+KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include
+
+LDFLAGS :=
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+#LDFLAGS_vmlinux := -Map linkmap.txt
+CHECKFLAGS +=
+
+PROCESSOR := unset
+UNIT := unset
+
+KBUILD_CFLAGS += -mam33 -mmem-funcs -DCPU=AM33
+KBUILD_AFLAGS += -mam33 -DCPU=AM33
+
+ifeq ($(CONFIG_MN10300_CURRENT_IN_E2),y)
+KBUILD_CFLAGS += -ffixed-e2 -fcall-saved-e5
+endif
+
+ifeq ($(CONFIG_MN10300_PROC_MN103E010),y)
+PROCESSOR := mn103e010
+endif
+
+ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y)
+UNIT := asb2303
+endif
+ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y)
+UNIT := asb2305
+endif
+
+
+head-y := arch/mn10300/kernel/head.o arch/mn10300/kernel/init_task.o
+
+core-y += arch/mn10300/kernel/ arch/mn10300/mm/
+
+ifneq ($(PROCESSOR),unset)
+core-y += arch/mn10300/proc-$(PROCESSOR)/
+endif
+ifneq ($(UNIT),unset)
+core-y += arch/mn10300/unit-$(UNIT)/
+endif
+libs-y += arch/mn10300/lib/
+
+drivers-$(CONFIG_OPROFILE) += arch/mn10300/oprofile/
+
+boot := arch/mn10300/boot
+
+.PHONY: zImage
+
+KBUILD_IMAGE := $(boot)/zImage
+CLEAN_FILES += $(boot)/zImage
+CLEAN_FILES += $(boot)/compressed/vmlinux
+CLEAN_FILES += $(boot)/compressed/vmlinux.bin
+CLEAN_FILES += $(boot)/compressed/vmlinux.bin.gz
+
+zImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+all: zImage
+
+bootstrap:
+ $(Q)$(MAKEBOOT) bootstrap
+
+archclean:
+ $(Q)$(MAKE) $(clean)=arch/mn10300/proc-mn103e010
+ $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2303
+ $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2305
+
+define archhelp
+ echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
+endef
+
+# If you make sure the .S files get compiled with debug info,
+# uncomment the following to disable optimisations
+# that are unhelpful whilst debugging.
+ifdef CONFIG_DEBUG_INFO
+#KBUILD_CFLAGS += -O1
+KBUILD_AFLAGS += -Wa,--gdwarf2
+endif
+
+###################################################################################################
+#
+# juggle some symlinks in the MN10300 asm include dir
+#
+# Update machine proc and unit symlinks if something which affects
+# them changed. We use .proc / .unit to indicate when they were
+# updated last, otherwise make uses the target directory mtime.
+#
+###################################################################################################
+
+# processor specific definitions
+include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf
+ @echo ' SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)'
+ifneq ($(KBUILD_SRC),)
+ $(Q)mkdir -p include/asm-mn10300
+ $(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc
+else
+ $(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc
+endif
+ @touch $@
+
+CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc
+
+prepare: include/asm-mn10300/.proc
+
+# unit specific definitions
+include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf
+ @echo ' SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)'
+ifneq ($(KBUILD_SRC),)
+ $(Q)mkdir -p include/asm-mn10300
+ $(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit
+else
+ $(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit
+endif
+ @touch $@
+
+CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit
+
+prepare: include/asm-mn10300/.unit
diff --git a/arch/mn10300/boot/.gitignore b/arch/mn10300/boot/.gitignore
new file mode 100644
index 000000000000..b6718de23693
--- /dev/null
+++ b/arch/mn10300/boot/.gitignore
@@ -0,0 +1 @@
+zImage
diff --git a/arch/mn10300/boot/Makefile b/arch/mn10300/boot/Makefile
new file mode 100644
index 000000000000..36c9caf8ea0a
--- /dev/null
+++ b/arch/mn10300/boot/Makefile
@@ -0,0 +1,28 @@
+# MN10300 kernel compressor and wrapper
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+
+targets := vmlinux.bin zImage
+
+subdir- := compressed
+
+# ---------------------------------------------------------------------------
+
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo 'Kernel: $@ is ready'
+
+$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
diff --git a/arch/mn10300/boot/compressed/Makefile b/arch/mn10300/boot/compressed/Makefile
new file mode 100644
index 000000000000..08a95e171685
--- /dev/null
+++ b/arch/mn10300/boot/compressed/Makefile
@@ -0,0 +1,22 @@
+#
+# Create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+
+LDFLAGS_vmlinux := -Ttext $(CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS) -e startup_32
+
+$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-am33lin -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.lds $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S
new file mode 100644
index 000000000000..502e1eb56709
--- /dev/null
+++ b/arch/mn10300/boot/compressed/head.S
@@ -0,0 +1,86 @@
+/* Boot entry point for a compressed MN10300 kernel
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+ .section .text
+
+#define DEBUG
+
+#include <linux/linkage.h>
+#include <asm/cpu-regs.h>
+
+ .globl startup_32
+startup_32:
+ # first save off parameters from bootloader
+ mov param_save_area,a0
+ mov d0,(a0)
+ mov d1,(4,a0)
+ mov d2,(8,a0)
+
+ mov sp,a3
+ mov decomp_stack+0x2000-4,a0
+ mov a0,sp
+
+ # invalidate and enable both of the caches
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0) # turn off first
+ mov CHCTR_ICINV|CHCTR_DCINV,d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD,d0 # writethru dcache
+ movhu d0,(a0) # enable
+
+ # clear the BSS area
+ mov __bss_start,a0
+ mov _end,a1
+ clr d0
+bssclear:
+ cmp a1,a0
+ bge bssclear_end
+ movbu d0,(a0)
+ inc a0
+ bra bssclear
+bssclear_end:
+
+ # decompress the kernel
+ call decompress_kernel[],0
+
+ # disable caches again
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+
+ mov param_save_area,a0
+ mov (a0),d0
+ mov (4,a0),d1
+ mov (8,a0),d2
+
+ mov a3,sp
+ mov CONFIG_KERNEL_TEXT_ADDRESS,a0
+ jmp (a0)
+
+ .data
+ .align 4
+param_save_area:
+ .rept 3
+ .word 0
+ .endr
+
+ .section .bss
+ .align 4
+decomp_stack:
+ .space 0x2000
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
new file mode 100644
index 000000000000..ded207efc97a
--- /dev/null
+++ b/arch/mn10300/boot/compressed/misc.c
@@ -0,0 +1,429 @@
+/* MN10300 Miscellaneous helper routines for kernel decompressor
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from arch/x86/boot/compressed/misc_32.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/compiler.h>
+#include <asm/serial-regs.h>
+#include "misc.h"
+
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+/* display 'Uncompressing Linux... ' messages on ttyS0 or ttyS1 */
+#if 1 /* ttyS0 */
+#define CYG_DEV_BASE 0xA6FB0000
+#else /* ttyS1 */
+#define CYG_DEV_BASE 0xA6FC0000
+#endif
+
+#define CYG_DEV_THR (*((volatile __u8*)(CYG_DEV_BASE + 0x00)))
+#define CYG_DEV_MCR (*((volatile __u8*)(CYG_DEV_BASE + 0x10)))
+#define SIO_MCR_DTR 0x01
+#define SIO_MCR_RTS 0x02
+#define CYG_DEV_LSR (*((volatile __u8*)(CYG_DEV_BASE + 0x14)))
+#define SIO_LSR_THRE 0x20 /* transmitter holding register empty */
+#define SIO_LSR_TEMT 0x40 /* transmitter register empty */
+#define CYG_DEV_MSR (*((volatile __u8*)(CYG_DEV_BASE + 0x18)))
+#define SIO_MSR_CTS 0x10 /* clear to send */
+#define SIO_MSR_DSR 0x20 /* data set ready */
+
+#define LSR_WAIT_FOR(STATE) \
+ do { while (!(CYG_DEV_LSR & SIO_LSR_##STATE)) {} } while (0)
+#define FLOWCTL_QUERY(LINE) \
+ ({ CYG_DEV_MSR & SIO_MSR_##LINE; })
+#define FLOWCTL_WAIT_FOR(LINE) \
+ do { while (!(CYG_DEV_MSR & SIO_MSR_##LINE)) {} } while (0)
+#define FLOWCTL_CLEAR(LINE) \
+ do { CYG_DEV_MCR &= ~SIO_MCR_##LINE; } while (0)
+#define FLOWCTL_SET(LINE) \
+ do { CYG_DEV_MCR |= SIO_MCR_##LINE; } while (0)
+#endif
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+
+static inline void *memset(const void *s, int c, size_t n)
+{
+ int i;
+ char *ss = (char *) s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return (void *)s;
+}
+
+#define memzero(s, n) memset((s), 0, (n))
+
+static inline void *memcpy(void *__dest, const void *__src, size_t __n)
+{
+ int i;
+ const char *s = __src;
+ char *d = __dest;
+
+ for (i = 0; i < __n; i++)
+ d[i] = s[i];
+ return __dest;
+}
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, and a power of
+ * two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* sliding window buffer */
+
+static unsigned insize; /* valid bytes in inbuf */
+static unsigned inptr; /* index of next byte to be processed in inbuf */
+static unsigned outcnt; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond, msg) { if (!(cond)) error(msg); }
+# define Trace(x) fprintf x
+# define Tracev(x) { if (verbose) fprintf x ; }
+# define Tracevv(x) { if (verbose > 1) fprintf x ; }
+# define Tracec(c, x) { if (verbose && (c)) fprintf x ; }
+# define Tracecv(c, x) { if (verbose > 1 && (c)) fprintf x ; }
+#else
+# define Assert(cond, msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c, x)
+# define Tracecv(c, x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(const char *) __attribute__((noreturn));
+static void kputs(const char *);
+
+static inline unsigned char get_byte(void)
+{
+ unsigned char ch = inptr < insize ? inbuf[inptr++] : fill_inbuf();
+
+#if 0
+ char hex[3];
+ hex[0] = ((ch & 0x0f) > 9) ?
+ ((ch & 0x0f) + 'A' - 0xa) : ((ch & 0x0f) + '0');
+ hex[1] = ((ch >> 4) > 9) ?
+ ((ch >> 4) + 'A' - 0xa) : ((ch >> 4) + '0');
+ hex[2] = 0;
+ kputs(hex);
+#endif
+ return ch;
+}
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define EXT_MEM_K (*(unsigned short *)0x90002)
+#ifndef STANDARD_MEMORY_BIOS_CALL
+#define ALT_MEM_K (*(unsigned long *) 0x901e0)
+#endif
+#define SCREEN_INFO (*(struct screen_info *)0x90000)
+
+static long bytes_out;
+static uch *output_data;
+static unsigned long output_ptr;
+
+
+static void *malloc(int size);
+
+static inline void free(void *where)
+{ /* Don't care */
+}
+
+static unsigned long free_mem_ptr = (unsigned long) &end;
+static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
+
+static inline void gzip_mark(void **ptr)
+{
+ kputs(".");
+ *ptr = (void *) free_mem_ptr;
+}
+
+static inline void gzip_release(void **ptr)
+{
+ free_mem_ptr = (unsigned long) *ptr;
+}
+
+#define INPLACE_MOVE_ROUTINE 0x1000
+#define LOW_BUFFER_START 0x2000
+#define LOW_BUFFER_END 0x90000
+#define LOW_BUFFER_SIZE (LOW_BUFFER_END - LOW_BUFFER_START)
+#define HEAP_SIZE 0x3000
+static int high_loaded;
+static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
+
+static char *vidmem = (char *)0xb8000;
+static int lines, cols;
+
+#include "../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size < 0)
+ error("Malloc error\n");
+ if (!free_mem_ptr)
+ error("Memory error\n");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *) free_mem_ptr;
+ free_mem_ptr += size;
+
+ if (free_mem_ptr >= free_mem_end_ptr)
+ error("\nOut of memory\n");
+
+ return p;
+}
+
+static inline void scroll(void)
+{
+ int i;
+
+ memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
+ for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
+ vidmem[i] = ' ';
+}
+
+static inline void kputchar(unsigned char ch)
+{
+#ifdef CONFIG_MN10300_UNIT_ASB2305
+ while (SC0STR & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ SC0TXB = 0x0d;
+ while (SC0STR & SC01STR_TBF)
+ continue;
+ }
+
+ SC0TXB = ch;
+
+#else
+ while (SC1STR & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ SC1TXB = 0x0d;
+ while (SC1STR & SC01STR_TBF)
+ continue;
+ }
+
+ SC1TXB = ch;
+
+#endif
+}
+
+static void kputs(const char *s)
+{
+#ifdef CONFIG_DEBUG_DECOMPRESS_KERNEL
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ while (*s) {
+ LSR_WAIT_FOR(THRE);
+
+ ch = *s++;
+ if (ch == 0x0a) {
+ CYG_DEV_THR = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ }
+ CYG_DEV_THR = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+#else
+
+ for (; *s; s++)
+ kputchar(*s);
+
+#endif
+#endif /* CONFIG_DEBUG_DECOMPRESS_KERNEL */
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf()
+{
+ if (insize != 0)
+ error("ran out of input data\n");
+
+ inbuf = input_data;
+ insize = input_len;
+ inptr = 1;
+ return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window_low(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void flush_window_high(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, ch;
+ in = window;
+ for (n = 0; n < outcnt; n++) {
+ ch = *output_data++ = *in++;
+ if ((ulg) output_data == LOW_BUFFER_END)
+ output_data = high_buffer_start;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void flush_window(void)
+{
+ if (high_loaded)
+ flush_window_high();
+ else
+ flush_window_low();
+}
+
+static void error(const char *x)
+{
+ kputs("\n\n");
+ kputs(x);
+ kputs("\n\n -- System halted");
+
+ while (1)
+ /* Halt */;
+}
+
+#define STACK_SIZE (4096)
+
+long user_stack[STACK_SIZE];
+
+struct {
+ long *a;
+ short b;
+} stack_start = { &user_stack[STACK_SIZE], 0 };
+
+void setup_normal_output_buffer(void)
+{
+#ifdef STANDARD_MEMORY_BIOS_CALL
+ if (EXT_MEM_K < 1024)
+ error("Less than 2MB of memory.\n");
+#else
+ if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024)
+ error("Less than 2MB of memory.\n");
+#endif
+ output_data = (char *) 0x100000; /* Points to 1M */
+}
+
+struct moveparams {
+ uch *low_buffer_start;
+ int lcount;
+ uch *high_buffer_start;
+ int hcount;
+};
+
+void setup_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+ high_buffer_start = (uch *)(((ulg) &end) + HEAP_SIZE);
+#ifdef STANDARD_MEMORY_BIOS_CALL
+ if (EXT_MEM_K < (3 * 1024))
+ error("Less than 4MB of memory.\n");
+#else
+ if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3 * 1024))
+ error("Less than 4MB of memory.\n");
+#endif
+ mv->low_buffer_start = output_data = (char *) LOW_BUFFER_START;
+ high_loaded = 1;
+ free_mem_end_ptr = (long) high_buffer_start;
+ if (0x100000 + LOW_BUFFER_SIZE > (ulg) high_buffer_start) {
+ high_buffer_start = (uch *)(0x100000 + LOW_BUFFER_SIZE);
+ mv->hcount = 0; /* say: we need not to move high_buffer */
+ } else {
+ mv->hcount = -1;
+ }
+ mv->high_buffer_start = high_buffer_start;
+}
+
+void close_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+ mv->lcount = bytes_out;
+ if (bytes_out > LOW_BUFFER_SIZE) {
+ mv->lcount = LOW_BUFFER_SIZE;
+ if (mv->hcount)
+ mv->hcount = bytes_out - LOW_BUFFER_SIZE;
+ } else {
+ mv->hcount = 0;
+ }
+}
+
+#undef DEBUGFLAG
+#ifdef DEBUGFLAG
+int debugflag;
+#endif
+
+int decompress_kernel(struct moveparams *mv)
+{
+#ifdef DEBUGFLAG
+ while (!debugflag)
+ barrier();
+#endif
+
+ output_data = (char *) CONFIG_KERNEL_TEXT_ADDRESS;
+
+ makecrc();
+ kputs("Uncompressing Linux... ");
+ gunzip();
+ kputs("Ok, booting the kernel.\n");
+ return 0;
+}
diff --git a/arch/mn10300/boot/compressed/misc.h b/arch/mn10300/boot/compressed/misc.h
new file mode 100644
index 000000000000..da921cd172fb
--- /dev/null
+++ b/arch/mn10300/boot/compressed/misc.h
@@ -0,0 +1,18 @@
+/* Internal definitions for the MN10300 kernel decompressor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+extern int end;
+
+/*
+ * vmlinux.lds
+ */
+extern char input_data[];
+extern int input_len;
diff --git a/arch/mn10300/boot/compressed/vmlinux.lds b/arch/mn10300/boot/compressed/vmlinux.lds
new file mode 100644
index 000000000000..a084903603fe
--- /dev/null
+++ b/arch/mn10300/boot/compressed/vmlinux.lds
@@ -0,0 +1,9 @@
+SECTIONS
+{
+ .data : {
+ input_len = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ input_data_end = .;
+ }
+}
diff --git a/arch/mn10300/boot/install.sh b/arch/mn10300/boot/install.sh
new file mode 100644
index 000000000000..072951c83976
--- /dev/null
+++ b/arch/mn10300/boot/install.sh
@@ -0,0 +1,67 @@
+#!/bin/sh
+#
+# arch/mn10300/boot/install -c.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# Licence. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+#
+# "make install -c" script for i386 architecture
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install -c path (blank if root directory)
+# $5 - boot rom file
+#
+
+# User may have a custom install -c script
+
+rm -fr $4/../usr/include/linux $4/../usr/include/asm
+install -c -m 0755 $2 $4/vmlinuz
+install -c -m 0755 $5 $4/boot.rom
+install -c -m 0755 -d $4/../usr/include/linux
+cd $TOPDIR/include/linux
+for i in `find . -maxdepth 1 -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux
+done
+install -c -m 0755 -d $4/../usr/include/linux/byteorder
+cd $TOPDIR/include/linux/byteorder
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/byteorder
+done
+install -c -m 0755 -d $4/../usr/include/linux/lockd
+cd $TOPDIR/include/linux/lockd
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/lockd
+done
+install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
+cd $TOPDIR/include/linux/netfilter_ipv4
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
+done
+install -c -m 0755 -d $4/../usr/include/linux/nfsd
+cd $TOPDIR/include/linux/nfsd
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
+done
+install -c -m 0755 -d $4/../usr/include/linux/raid
+cd $TOPDIR/include/linux/raid
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/raid
+done
+install -c -m 0755 -d $4/../usr/include/linux/sunrpc
+cd $TOPDIR/include/linux/sunrpc
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/sunrpc
+done
+install -c -m 0755 -d $4/../usr/include/asm
+cd $TOPDIR/include/asm
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/asm
+done
diff --git a/arch/mn10300/boot/tools/build.c b/arch/mn10300/boot/tools/build.c
new file mode 100644
index 000000000000..4f552ead0f8e
--- /dev/null
+++ b/arch/mn10300/boot/tools/build.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 1997 Martin Mares
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ * Rewritten by Martin Mares, April 1997
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <asm/boot.h>
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* Minimal number of setup sectors (see also bootsect.S) */
+#define SETUP_SECTS 4
+
+uint8_t buf[1024];
+int fd;
+int is_big_kernel;
+
+__attribute__((noreturn))
+void die(const char *str, ...)
+{
+ va_list args;
+ va_start(args, str);
+ vfprintf(stderr, str, args);
+ fputc('\n', stderr);
+ exit(1);
+}
+
+void file_open(const char *name)
+{
+ fd = open(name, O_RDONLY, 0);
+ if (fd < 0)
+ die("Unable to open `%s': %m", name);
+}
+
+__attribute__((noreturn))
+void usage(void)
+{
+ die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char **argv)
+{
+ unsigned int i, c, sz, setup_sectors;
+ uint32_t sys_size;
+ uint8_t major_root, minor_root;
+ struct stat sb;
+
+ if (argc > 2 && !strcmp(argv[1], "-b")) {
+ is_big_kernel = 1;
+ argc--, argv++;
+ }
+ if ((argc < 4) || (argc > 5))
+ usage();
+ if (argc > 4) {
+ if (!strcmp(argv[4], "CURRENT")) {
+ if (stat("/", &sb)) {
+ perror("/");
+ die("Couldn't stat /");
+ }
+ major_root = major(sb.st_dev);
+ minor_root = minor(sb.st_dev);
+ } else if (strcmp(argv[4], "FLOPPY")) {
+ if (stat(argv[4], &sb)) {
+ perror(argv[4]);
+ die("Couldn't stat root device.");
+ }
+ major_root = major(sb.st_rdev);
+ minor_root = minor(sb.st_rdev);
+ } else {
+ major_root = 0;
+ minor_root = 0;
+ }
+ } else {
+ major_root = DEFAULT_MAJOR_ROOT;
+ minor_root = DEFAULT_MINOR_ROOT;
+ }
+ fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+
+ file_open(argv[1]);
+ i = read(fd, buf, sizeof(buf));
+ fprintf(stderr, "Boot sector %d bytes.\n", i);
+ if (i != 512)
+ die("Boot block must be exactly 512 bytes");
+ if (buf[510] != 0x55 || buf[511] != 0xaa)
+ die("Boot block hasn't got boot flag (0xAA55)");
+ buf[508] = minor_root;
+ buf[509] = major_root;
+ if (write(1, buf, 512) != 512)
+ die("Write call failed");
+ close(fd);
+
+ /* Copy the setup code */
+ file_open(argv[2]);
+ for (i = 0; (c = read(fd, buf, sizeof(buf))) > 0; i += c)
+ if (write(1, buf, c) != c)
+ die("Write call failed");
+ if (c != 0)
+ die("read-error on `setup'");
+ close(fd);
+
+ /* Pad unused space with zeros */
+ setup_sectors = (i + 511) / 512;
+ /* for compatibility with ancient versions of LILO. */
+ if (setup_sectors < SETUP_SECTS)
+ setup_sectors = SETUP_SECTS;
+ fprintf(stderr, "Setup is %d bytes.\n", i);
+ memset(buf, 0, sizeof(buf));
+ while (i < setup_sectors * 512) {
+ c = setup_sectors * 512 - i;
+ if (c > sizeof(buf))
+ c = sizeof(buf);
+ if (write(1, buf, c) != c)
+ die("Write call failed");
+ i += c;
+ }
+
+ file_open(argv[3]);
+ if (fstat(fd, &sb))
+ die("Unable to stat `%s': %m", argv[3]);
+ sz = sb.st_size;
+ fprintf(stderr, "System is %d kB\n", sz / 1024);
+ sys_size = (sz + 15) / 16;
+ /* 0x28000*16 = 2.5 MB, conservative estimate for the current maximum */
+ if (sys_size > (is_big_kernel ? 0x28000 : DEF_SYSSIZE))
+ die("System is too big. Try using %smodules.",
+ is_big_kernel ? "" : "bzImage or ");
+ if (sys_size > 0xffff)
+ fprintf(stderr,
+ "warning: kernel is too big for standalone boot "
+ "from floppy\n");
+ while (sz > 0) {
+ int l, n;
+
+ l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
+ n = read(fd, buf, l);
+ if (n != l) {
+ if (n < 0)
+ die("Error reading %s: %m", argv[3]);
+ else
+ die("%s: Unexpected EOF", argv[3]);
+ }
+ if (write(1, buf, l) != l)
+ die("Write failed");
+ sz -= l;
+ }
+ close(fd);
+
+ /* Write sizes to the bootsector */
+ if (lseek(1, 497, SEEK_SET) != 497)
+ die("Output: seek failed");
+ buf[0] = setup_sectors;
+ if (write(1, buf, 1) != 1)
+ die("Write of setup sector count failed");
+ if (lseek(1, 500, SEEK_SET) != 500)
+ die("Output: seek failed");
+ buf[0] = (sys_size & 0xff);
+ buf[1] = ((sys_size >> 8) & 0xff);
+ if (write(1, buf, 2) != 2)
+ die("Write of image length failed");
+
+ return 0;
+}
diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig
new file mode 100644
index 000000000000..0189a058da9f
--- /dev/null
+++ b/arch/mn10300/configs/asb2303_defconfig
@@ -0,0 +1,555 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc2
+# Fri Nov 16 13:36:38 2007
+#
+CONFIG_MN10300=y
+CONFIG_AM33=y
+CONFIG_MMU=y
+# CONFIG_HIGHMEM is not set
+# CONFIG_NUMA is not set
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_BUG=y
+CONFIG_QUICKLIST=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_SUPPORTS_AOUT is not set
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+
+#
+# Matsushita MN10300 system setup
+#
+CONFIG_MN10300_UNIT_ASB2303=y
+# CONFIG_MN10300_UNIT_ASB2305 is not set
+CONFIG_MN10300_PROC_MN103E010=y
+CONFIG_MN10300_CPU_AM33V2=y
+CONFIG_FPU=y
+CONFIG_MN10300_CACHE_WBACK=y
+# CONFIG_MN10300_CACHE_WTHRU is not set
+# CONFIG_MN10300_CACHE_DISABLED is not set
+
+#
+# Memory layout options
+#
+CONFIG_KERNEL_RAM_BASE_ADDRESS=0x90000000
+CONFIG_INTERRUPT_VECTOR_BASE=0x90000000
+CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
+CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+CONFIG_MN10300_CURRENT_IN_E2=y
+CONFIG_MN10300_USING_JTAG=y
+CONFIG_MN10300_RTC=y
+CONFIG_MN10300_WD_TIMER=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# MN10300 internal serial options
+#
+CONFIG_MN10300_PROC_HAS_TTYSM0=y
+CONFIG_MN10300_PROC_HAS_TTYSM1=y
+CONFIG_MN10300_PROC_HAS_TTYSM2=y
+CONFIG_MN10300_TTYSM=y
+CONFIG_MN10300_TTYSM_CONSOLE=y
+CONFIG_MN10300_TTYSM0=y
+CONFIG_MN10300_TTYSM0_TIMER8=y
+# CONFIG_MN10300_TTYSM0_TIMER2 is not set
+CONFIG_MN10300_TTYSM1=y
+CONFIG_MN10300_TTYSM1_TIMER9=y
+# CONFIG_MN10300_TTYSM1_TIMER3 is not set
+# CONFIG_MN10300_TTYSM2 is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Executable formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
new file mode 100644
index 000000000000..ef07c956170a
--- /dev/null
+++ b/arch/mn10300/kernel/Makefile
@@ -0,0 +1,27 @@
+#
+# Makefile for the MN10300-specific core kernel code
+#
+extra-y := head.o init_task.o vmlinux.lds
+
+obj-y := process.o semaphore.o signal.o entry.o fpu.o traps.o irq.o \
+ ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
+ switch_to.o mn10300_ksyms.o kernel_execve.o
+
+obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o
+
+obj-$(CONFIG_FPU) += fpu-low.o
+
+obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \
+ mn10300-debug.o
+obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
+obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
+obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-$(CONFIG_GDBSTUB) += gdb-cache.o
+endif
+
+obj-$(CONFIG_MN10300_RTC) += rtc.o
+obj-$(CONFIG_PROFILE) += profile.o profile-low.o
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_KPROBES) += kprobes.o
diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
new file mode 100644
index 000000000000..ee2d9f8af5ad
--- /dev/null
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -0,0 +1,108 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <asm/ucontext.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/ptrace.h>
+#include "sigframe.h"
+#include "mn10300-serial.h"
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->")
+
+#define OFFSET(sym, str, mem) \
+ DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+ OFFSET(SIGCONTEXT_d0, sigcontext, d0);
+ OFFSET(SIGCONTEXT_d1, sigcontext, d1);
+ BLANK();
+
+ OFFSET(TI_task, thread_info, task);
+ OFFSET(TI_exec_domain, thread_info, exec_domain);
+ OFFSET(TI_flags, thread_info, flags);
+ OFFSET(TI_cpu, thread_info, cpu);
+ OFFSET(TI_preempt_count, thread_info, preempt_count);
+ OFFSET(TI_addr_limit, thread_info, addr_limit);
+ OFFSET(TI_restart_block, thread_info, restart_block);
+ BLANK();
+
+ OFFSET(REG_D0, pt_regs, d0);
+ OFFSET(REG_D1, pt_regs, d1);
+ OFFSET(REG_D2, pt_regs, d2);
+ OFFSET(REG_D3, pt_regs, d3);
+ OFFSET(REG_A0, pt_regs, a0);
+ OFFSET(REG_A1, pt_regs, a1);
+ OFFSET(REG_A2, pt_regs, a2);
+ OFFSET(REG_A3, pt_regs, a3);
+ OFFSET(REG_E0, pt_regs, e0);
+ OFFSET(REG_E1, pt_regs, e1);
+ OFFSET(REG_E2, pt_regs, e2);
+ OFFSET(REG_E3, pt_regs, e3);
+ OFFSET(REG_E4, pt_regs, e4);
+ OFFSET(REG_E5, pt_regs, e5);
+ OFFSET(REG_E6, pt_regs, e6);
+ OFFSET(REG_E7, pt_regs, e7);
+ OFFSET(REG_SP, pt_regs, sp);
+ OFFSET(REG_EPSW, pt_regs, epsw);
+ OFFSET(REG_PC, pt_regs, pc);
+ OFFSET(REG_LAR, pt_regs, lar);
+ OFFSET(REG_LIR, pt_regs, lir);
+ OFFSET(REG_MDR, pt_regs, mdr);
+ OFFSET(REG_MCVF, pt_regs, mcvf);
+ OFFSET(REG_MCRL, pt_regs, mcrl);
+ OFFSET(REG_MCRH, pt_regs, mcrh);
+ OFFSET(REG_MDRQ, pt_regs, mdrq);
+ OFFSET(REG_ORIG_D0, pt_regs, orig_d0);
+ OFFSET(REG_NEXT, pt_regs, next);
+ DEFINE(REG__END, sizeof(struct pt_regs));
+ BLANK();
+
+ OFFSET(THREAD_UREGS, thread_struct, uregs);
+ OFFSET(THREAD_PC, thread_struct, pc);
+ OFFSET(THREAD_SP, thread_struct, sp);
+ OFFSET(THREAD_A3, thread_struct, a3);
+ OFFSET(THREAD_USP, thread_struct, usp);
+ OFFSET(THREAD_FRAME, thread_struct, __frame);
+ BLANK();
+
+ DEFINE(CLONE_VM_asm, CLONE_VM);
+ DEFINE(CLONE_FS_asm, CLONE_FS);
+ DEFINE(CLONE_FILES_asm, CLONE_FILES);
+ DEFINE(CLONE_SIGHAND_asm, CLONE_SIGHAND);
+ DEFINE(CLONE_UNTRACED_asm, CLONE_UNTRACED);
+ DEFINE(SIGCHLD_asm, SIGCHLD);
+ BLANK();
+
+ OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
+ OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
+
+ DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+
+ OFFSET(__rx_buffer, mn10300_serial_port, rx_buffer);
+ OFFSET(__rx_inp, mn10300_serial_port, rx_inp);
+ OFFSET(__rx_outp, mn10300_serial_port, rx_outp);
+ OFFSET(__tx_info_buffer, mn10300_serial_port, uart.info);
+ OFFSET(__tx_xchar, mn10300_serial_port, tx_xchar);
+ OFFSET(__tx_break, mn10300_serial_port, tx_break);
+ OFFSET(__intr_flags, mn10300_serial_port, intr_flags);
+ OFFSET(__rx_icr, mn10300_serial_port, rx_icr);
+ OFFSET(__tx_icr, mn10300_serial_port, tx_icr);
+ OFFSET(__tm_icr, mn10300_serial_port, _tmicr);
+ OFFSET(__iobase, mn10300_serial_port, _iobase);
+
+ DEFINE(__UART_XMIT_SIZE, UART_XMIT_SIZE);
+ OFFSET(__xmit_buffer, uart_info, xmit.buf);
+ OFFSET(__xmit_head, uart_info, xmit.head);
+ OFFSET(__xmit_tail, uart_info, xmit.tail);
+}
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
new file mode 100644
index 000000000000..11de3606eee6
--- /dev/null
+++ b/arch/mn10300/kernel/entry.S
@@ -0,0 +1,721 @@
+###############################################################################
+#
+# MN10300 Exception and interrupt entry points
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/system.h>
+#include <asm/thread_info.h>
+#include <asm/intctl-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+#include <asm/frame.inc>
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop __cli
+#else
+#define preempt_stop
+#define resume_kernel restore_all
+#endif
+
+ .macro __cli
+ and ~EPSW_IM,epsw
+ or EPSW_IE|MN10300_CLI_LEVEL,epsw
+ nop
+ nop
+ nop
+ .endm
+ .macro __sti
+ or EPSW_IE|EPSW_IM_7,epsw
+ .endm
+
+
+ .am33_2
+
+###############################################################################
+#
+# the return path for a forked child
+# - on entry, D0 holds the address of the previous task to run
+#
+###############################################################################
+ENTRY(ret_from_fork)
+ call schedule_tail[],0
+ GET_THREAD_INFO a2
+
+ # return 0 to indicate child process
+ clr d0
+ mov d0,(REG_D0,fp)
+ jmp syscall_exit
+
+###############################################################################
+#
+# system call handler
+#
+###############################################################################
+ENTRY(system_call)
+ add -4,sp
+ SAVE_ALL
+ mov d0,(REG_ORIG_D0,fp)
+ GET_THREAD_INFO a2
+ cmp nr_syscalls,d0
+ bcc syscall_badsys
+ btst _TIF_SYSCALL_TRACE,(TI_flags,a2)
+ bne syscall_trace_entry
+syscall_call:
+ add d0,d0,a1
+ add a1,a1
+ mov (REG_A0,fp),d0
+ mov (sys_call_table,a1),a0
+ calls (a0)
+ mov d0,(REG_D0,fp)
+syscall_exit:
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+ mov (TI_flags,a2),d2
+ btst _TIF_ALLWORK_MASK,d2
+ bne syscall_exit_work
+restore_all:
+ RESTORE_ALL
+
+###############################################################################
+#
+# perform work that needs to be done immediately before resumption and syscall
+# tracing
+#
+###############################################################################
+ ALIGN
+syscall_exit_work:
+ btst _TIF_SYSCALL_TRACE,d2
+ beq work_pending
+ __sti # could let do_syscall_trace() call
+ # schedule() instead
+ mov fp,d0
+ mov 1,d1
+ call do_syscall_trace[],0 # do_syscall_trace(regs,entryexit)
+ jmp resume_userspace
+
+ ALIGN
+work_pending:
+ btst _TIF_NEED_RESCHED,d2
+ beq work_notifysig
+
+work_resched:
+ call schedule[],0
+
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+
+ # is there any work to be done other than syscall tracing?
+ mov (TI_flags,a2),d2
+ btst _TIF_WORK_MASK,d2
+ beq restore_all
+ btst _TIF_NEED_RESCHED,d2
+ bne work_resched
+
+ # deal with pending signals and notify-resume requests
+work_notifysig:
+ mov fp,d0
+ mov d2,d1
+ call do_notify_resume[],0
+ jmp resume_userspace
+
+ # perform syscall entry tracing
+syscall_trace_entry:
+ mov -ENOSYS,d0
+ mov d0,(REG_D0,fp)
+ mov fp,d0
+ clr d1
+ call do_syscall_trace[],0
+ mov (REG_ORIG_D0,fp),d0
+ mov (REG_D1,fp),d1
+ cmp nr_syscalls,d0
+ bcs syscall_call
+ jmp syscall_exit
+
+syscall_badsys:
+ mov -ENOSYS,d0
+ mov d0,(REG_D0,fp)
+ jmp resume_userspace
+
+ # userspace resumption stub bypassing syscall exit tracing
+ .globl ret_from_exception, ret_from_intr
+ ALIGN
+ret_from_exception:
+ preempt_stop
+ret_from_intr:
+ GET_THREAD_INFO a2
+ mov (REG_EPSW,fp),d0 # need to deliver signals before
+ # returning to userspace
+ and EPSW_nSL,d0
+ beq resume_kernel # returning to supervisor mode
+
+ENTRY(resume_userspace)
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+
+ # is there any work to be done on int/exception return?
+ mov (TI_flags,a2),d2
+ btst _TIF_WORK_MASK,d2
+ bne work_pending
+ jmp restore_all
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+ mov (TI_preempt_count,a2),d0 # non-zero preempt_count ?
+ cmp 0,d0
+ bne restore_all
+
+need_resched:
+ btst _TIF_NEED_RESCHED,(TI_flags,a2)
+ beq restore_all
+ mov (REG_EPSW,fp),d0
+ and EPSW_IM,d0
+ cmp EPSW_IM_7,d0 # interrupts off (exception path) ?
+ beq restore_all
+ call preempt_schedule_irq[],0
+ jmp need_resched
+#endif
+
+
+###############################################################################
+#
+# IRQ handler entry point
+# - intended to be entered at multiple priorities
+#
+###############################################################################
+ENTRY(irq_handler)
+ add -4,sp
+ SAVE_ALL
+
+ # it's not a syscall
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ mov fp,d0
+ call do_IRQ[],0 # do_IRQ(regs)
+
+ jmp ret_from_intr
+
+###############################################################################
+#
+# Monitor Signal handler entry point
+#
+###############################################################################
+ENTRY(monitor_signal)
+ movbu (0xae000001),d1
+ cmp 1,d1
+ beq monsignal
+ ret [],0
+
+monsignal:
+ or EPSW_NMID,epsw
+ mov d0,a0
+ mov a0,sp
+ mov (REG_EPSW,fp),d1
+ and ~EPSW_nSL,d1
+ mov d1,(REG_EPSW,fp)
+ movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+ mov (sp),a1
+ mov a1,usp
+ movm (sp),[other]
+ add 4,sp
+here: jmp 0x8e000008-here+0x8e000008
+
+###############################################################################
+#
+# Double Fault handler entry point
+# - note that there will not be a stack, D0/A0 will hold EPSW/PC as were
+#
+###############################################################################
+ .section .bss
+ .balign THREAD_SIZE
+ .space THREAD_SIZE
+__df_stack:
+ .previous
+
+ENTRY(double_fault)
+ mov a0,(__df_stack-4) # PC as was
+ mov d0,(__df_stack-8) # EPSW as was
+ mn10300_set_dbfleds # display 'db-f' on the LEDs
+ mov 0xaa55aa55,d0
+ mov d0,(__df_stack-12) # no ORIG_D0
+ mov sp,a0 # save corrupted SP
+ mov __df_stack-12,sp # emergency supervisor stack
+ SAVE_ALL
+ mov a0,(REG_A0,fp) # save corrupted SP as A0 (which got
+ # clobbered by the CPU)
+ mov fp,d0
+ calls do_double_fault
+double_fault_loop:
+ bra double_fault_loop
+
+###############################################################################
+#
+# Bus Error handler entry point
+# - handle external (async) bus errors separately
+#
+###############################################################################
+ENTRY(raw_bus_error)
+ add -4,sp
+ mov d0,(sp)
+ mov (BCBERR),d0 # what
+ btst BCBERR_BEMR_DMA,d0 # see if it was an external bus error
+ beq __common_exception_aux # it wasn't
+
+ SAVE_ALL
+ mov (BCBEAR),d1 # destination of erroneous access
+
+ mov (REG_ORIG_D0,fp),d2
+ mov d2,(REG_D0,fp)
+ mov -1,d2
+ mov d2,(REG_ORIG_D0,fp)
+
+ add -4,sp
+ mov fp,(12,sp) # frame pointer
+ call io_bus_error[],0
+ jmp restore_all
+
+###############################################################################
+#
+# Miscellaneous exception entry points
+#
+###############################################################################
+ENTRY(nmi_handler)
+ add -4,sp
+ mov d0,(sp)
+ mov (TBR),d0
+ bra __common_exception_nonmi
+
+ENTRY(__common_exception)
+ add -4,sp
+ mov d0,(sp)
+
+__common_exception_aux:
+ mov (TBR),d0
+ and ~EPSW_NMID,epsw # turn NMIs back on if not NMI
+ or EPSW_IE,epsw
+
+__common_exception_nonmi:
+ and 0x0000FFFF,d0 # turn the exception code into a vector
+ # table index
+
+ btst 0x00000007,d0
+ bne 1f
+ cmp 0x00000400,d0
+ bge 1f
+
+ SAVE_ALL # build the stack frame
+
+ mov (REG_D0,fp),a2 # get the exception number
+ mov (REG_ORIG_D0,fp),d0
+ mov d0,(REG_D0,fp)
+ mov -1,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+#ifdef CONFIG_GDBSTUB
+ btst 0x01,(gdbstub_busy)
+ beq 2f
+ and ~EPSW_IE,epsw
+ mov fp,d0
+ mov a2,d1
+ call gdbstub_exception[],0 # gdbstub itself caused an exception
+ bra restore_all
+2:
+#endif
+
+ mov fp,d0 # arg 0: stacked register file
+ mov a2,d1 # arg 1: exception number
+ lsr 1,a2
+
+ mov (exception_table,a2),a2
+ calls (a2)
+ jmp ret_from_exception
+
+1: pi # BUG() equivalent
+
+###############################################################################
+#
+# Exception handler functions table
+#
+###############################################################################
+ .data
+ENTRY(exception_table)
+ .rept 0x400>>1
+ .long uninitialised_exception
+ .endr
+ .previous
+
+###############################################################################
+#
+# Change an entry in the exception table
+# - D0 exception code, D1 handler
+#
+###############################################################################
+ENTRY(set_excp_vector)
+ lsr 1,d0
+ add exception_table,d0
+ mov d1,(d0)
+ mov 4,d1
+#if defined(CONFIG_MN10300_CACHE_WBACK)
+ jmp mn10300_dcache_flush_inv_range2
+#else
+ ret [],0
+#endif
+
+###############################################################################
+#
+# System call table
+#
+###############################################################################
+ .data
+ENTRY(sys_call_table)
+ .long sys_restart_syscall /* 0 */
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 - old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* old sys_olduname */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long old_select
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall /* old sys_uname */
+ .long sys_ni_syscall /* 110 - iopl */
+ .long sys_vhangup
+ .long sys_ni_syscall /* old "idle" system call */
+ .long sys_ni_syscall /* vm86old */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* reserved for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_ni_syscall /* vm86 */
+ .long sys_ni_syscall /* Old sys_query_module */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* reserved for streams1 */
+ .long sys_ni_syscall /* reserved for streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_ni_syscall /* sys_set_thread_area */
+ .long sys_ni_syscall /* sys_get_thread_area */
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_ni_syscall /* sys_vserver */
+ .long sys_mbind
+ .long sys_get_mempolicy /* 275 */
+ .long sys_set_mempolicy
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_kexec_load
+ .long sys_waitid
+ .long sys_ni_syscall /* 285 */ /* available */
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl
+ .long sys_cacheflush
+ .long sys_ioprio_set /* 290 */
+ .long sys_ioprio_get
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages /* 295 */
+ .long sys_openat
+ .long sys_mkdirat
+ .long sys_mknodat
+ .long sys_fchownat
+ .long sys_futimesat /* 300 */
+ .long sys_fstatat64
+ .long sys_unlinkat
+ .long sys_renameat
+ .long sys_linkat
+ .long sys_symlinkat /* 305 */
+ .long sys_readlinkat
+ .long sys_fchmodat
+ .long sys_faccessat
+ .long sys_pselect6
+ .long sys_ppoll /* 310 */
+ .long sys_unshare
+ .long sys_set_robust_list
+ .long sys_get_robust_list
+ .long sys_splice
+ .long sys_sync_file_range /* 315 */
+ .long sys_tee
+ .long sys_vmsplice
+ .long sys_move_pages
+ .long sys_getcpu
+ .long sys_epoll_pwait /* 320 */
+ .long sys_utimensat
+ .long sys_signalfd
+ .long sys_timerfd_create
+ .long sys_eventfd
+ .long sys_fallocate /* 325 */
+ .long sys_timerfd_settime
+ .long sys_timerfd_gettime
+
+
+nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/fpu-low.S b/arch/mn10300/kernel/fpu-low.S
new file mode 100644
index 000000000000..96cfd47e68d5
--- /dev/null
+++ b/arch/mn10300/kernel/fpu-low.S
@@ -0,0 +1,197 @@
+/* MN10300 Low level FPU management operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cpu-regs.h>
+
+###############################################################################
+#
+# void fpu_init_state(void)
+# - initialise the FPU
+#
+###############################################################################
+ .globl fpu_init_state
+ .type fpu_init_state,@function
+fpu_init_state:
+ mov epsw,d0
+ or EPSW_FE,epsw
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+ fmov 0,fs0
+ fmov fs0,fs1
+ fmov fs0,fs2
+ fmov fs0,fs3
+ fmov fs0,fs4
+ fmov fs0,fs5
+ fmov fs0,fs6
+ fmov fs0,fs7
+ fmov fs0,fs8
+ fmov fs0,fs9
+ fmov fs0,fs10
+ fmov fs0,fs11
+ fmov fs0,fs12
+ fmov fs0,fs13
+ fmov fs0,fs14
+ fmov fs0,fs15
+ fmov fs0,fs16
+ fmov fs0,fs17
+ fmov fs0,fs18
+ fmov fs0,fs19
+ fmov fs0,fs20
+ fmov fs0,fs21
+ fmov fs0,fs22
+ fmov fs0,fs23
+ fmov fs0,fs24
+ fmov fs0,fs25
+ fmov fs0,fs26
+ fmov fs0,fs27
+ fmov fs0,fs28
+ fmov fs0,fs29
+ fmov fs0,fs30
+ fmov fs0,fs31
+ fmov FPCR_INIT,fpcr
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+ mov d0,epsw
+ ret [],0
+
+ .size fpu_init_state,.-fpu_init_state
+
+###############################################################################
+#
+# void fpu_save(struct fpu_state_struct *)
+# - save the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+ .globl fpu_save
+ .type fpu_save,@function
+fpu_save:
+ mov epsw,d1
+ or EPSW_FE,epsw /* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+ mov d0,a0
+ fmov fs0,(a0+)
+ fmov fs1,(a0+)
+ fmov fs2,(a0+)
+ fmov fs3,(a0+)
+ fmov fs4,(a0+)
+ fmov fs5,(a0+)
+ fmov fs6,(a0+)
+ fmov fs7,(a0+)
+ fmov fs8,(a0+)
+ fmov fs9,(a0+)
+ fmov fs10,(a0+)
+ fmov fs11,(a0+)
+ fmov fs12,(a0+)
+ fmov fs13,(a0+)
+ fmov fs14,(a0+)
+ fmov fs15,(a0+)
+ fmov fs16,(a0+)
+ fmov fs17,(a0+)
+ fmov fs18,(a0+)
+ fmov fs19,(a0+)
+ fmov fs20,(a0+)
+ fmov fs21,(a0+)
+ fmov fs22,(a0+)
+ fmov fs23,(a0+)
+ fmov fs24,(a0+)
+ fmov fs25,(a0+)
+ fmov fs26,(a0+)
+ fmov fs27,(a0+)
+ fmov fs28,(a0+)
+ fmov fs29,(a0+)
+ fmov fs30,(a0+)
+ fmov fs31,(a0+)
+ fmov fpcr,d0
+ mov d0,(a0)
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+
+ mov d1,epsw
+ ret [],0
+
+ .size fpu_save,.-fpu_save
+
+###############################################################################
+#
+# void fpu_restore(struct fpu_state_struct *)
+# - restore the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+ .globl fpu_restore
+ .type fpu_restore,@function
+fpu_restore:
+ mov epsw,d1
+ or EPSW_FE,epsw /* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+ mov d0,a0
+ fmov (a0+),fs0
+ fmov (a0+),fs1
+ fmov (a0+),fs2
+ fmov (a0+),fs3
+ fmov (a0+),fs4
+ fmov (a0+),fs5
+ fmov (a0+),fs6
+ fmov (a0+),fs7
+ fmov (a0+),fs8
+ fmov (a0+),fs9
+ fmov (a0+),fs10
+ fmov (a0+),fs11
+ fmov (a0+),fs12
+ fmov (a0+),fs13
+ fmov (a0+),fs14
+ fmov (a0+),fs15
+ fmov (a0+),fs16
+ fmov (a0+),fs17
+ fmov (a0+),fs18
+ fmov (a0+),fs19
+ fmov (a0+),fs20
+ fmov (a0+),fs21
+ fmov (a0+),fs22
+ fmov (a0+),fs23
+ fmov (a0+),fs24
+ fmov (a0+),fs25
+ fmov (a0+),fs26
+ fmov (a0+),fs27
+ fmov (a0+),fs28
+ fmov (a0+),fs29
+ fmov (a0+),fs30
+ fmov (a0+),fs31
+ mov (a0),d0
+ fmov d0,fpcr
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+
+ mov d1,epsw
+ ret [],0
+
+ .size fpu_restore,.-fpu_restore
diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c
new file mode 100644
index 000000000000..e705f25ad5ff
--- /dev/null
+++ b/arch/mn10300/kernel/fpu.c
@@ -0,0 +1,223 @@
+/* MN10300 FPU management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include <asm/elf.h>
+#include <asm/exceptions.h>
+
+struct task_struct *fpu_state_owner;
+
+/*
+ * handle an exception due to the FPU being disabled
+ */
+asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code)
+{
+ struct task_struct *tsk = current;
+
+ if (!user_mode(regs))
+ die_if_no_fixup("An FPU Disabled exception happened in"
+ " kernel space\n",
+ regs, code);
+
+#ifdef CONFIG_FPU
+ preempt_disable();
+
+ /* transfer the last process's FPU state to memory */
+ if (fpu_state_owner) {
+ fpu_save(&fpu_state_owner->thread.fpu_state);
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ }
+
+ /* the current process now owns the FPU state */
+ fpu_state_owner = tsk;
+ regs->epsw |= EPSW_FE;
+
+ /* load the FPU with the current process's FPU state or invent a new
+ * clean one if the process doesn't have one */
+ if (is_using_fpu(tsk)) {
+ fpu_restore(&tsk->thread.fpu_state);
+ } else {
+ fpu_init_state();
+ set_using_fpu(tsk);
+ }
+
+ preempt_enable();
+#else
+ {
+ siginfo_t info;
+
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_addr = (void *) tsk->thread.uregs->pc;
+ info.si_code = FPE_FLTINV;
+
+ force_sig_info(SIGFPE, &info, tsk);
+ }
+#endif /* CONFIG_FPU */
+}
+
+/*
+ * handle an FPU operational exception
+ * - there's a possibility that if the FPU is asynchronous, the signal might
+ * be meant for a process other than the current one
+ */
+asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
+{
+ struct task_struct *tsk = fpu_state_owner;
+ siginfo_t info;
+
+ if (!user_mode(regs))
+ die_if_no_fixup("An FPU Operation exception happened in"
+ " kernel space\n",
+ regs, code);
+
+ if (!tsk)
+ die_if_no_fixup("An FPU Operation exception happened,"
+ " but the FPU is not in use",
+ regs, code);
+
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_addr = (void *) tsk->thread.uregs->pc;
+ info.si_code = FPE_FLTINV;
+
+#ifdef CONFIG_FPU
+ {
+ u32 fpcr;
+
+ /* get FPCR (we need to enable the FPU whilst we do this) */
+ asm volatile(" or %1,epsw \n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ " nop \n"
+ " nop \n"
+ " nop \n"
+#endif
+ " fmov fpcr,%0 \n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ " nop \n"
+ " nop \n"
+ " nop \n"
+#endif
+ " and %2,epsw \n"
+ : "=&d"(fpcr)
+ : "i"(EPSW_FE), "i"(~EPSW_FE)
+ );
+
+ if (fpcr & FPCR_EC_Z)
+ info.si_code = FPE_FLTDIV;
+ else if (fpcr & FPCR_EC_O)
+ info.si_code = FPE_FLTOVF;
+ else if (fpcr & FPCR_EC_U)
+ info.si_code = FPE_FLTUND;
+ else if (fpcr & FPCR_EC_I)
+ info.si_code = FPE_FLTRES;
+ }
+#endif
+
+ force_sig_info(SIGFPE, &info, tsk);
+}
+
+/*
+ * save the FPU state to a signal context
+ */
+int fpu_setup_sigcontext(struct fpucontext *fpucontext)
+{
+#ifdef CONFIG_FPU
+ struct task_struct *tsk = current;
+
+ if (!is_using_fpu(tsk))
+ return 0;
+
+ /* transfer the current FPU state to memory and cause fpu_init() to be
+ * triggered by the next attempted FPU operation by the current
+ * process.
+ */
+ preempt_disable();
+
+ if (fpu_state_owner == tsk) {
+ fpu_save(&tsk->thread.fpu_state);
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ fpu_state_owner = NULL;
+ }
+
+ preempt_enable();
+
+ /* we no longer have a valid current FPU state */
+ clear_using_fpu(tsk);
+
+ /* transfer the saved FPU state onto the userspace stack */
+ if (copy_to_user(fpucontext,
+ &tsk->thread.fpu_state,
+ min(sizeof(struct fpu_state_struct),
+ sizeof(struct fpucontext))))
+ return -1;
+
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+/*
+ * kill a process's FPU state during restoration after signal handling
+ */
+void fpu_kill_state(struct task_struct *tsk)
+{
+#ifdef CONFIG_FPU
+ /* disown anything left in the FPU */
+ preempt_disable();
+
+ if (fpu_state_owner == tsk) {
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ fpu_state_owner = NULL;
+ }
+
+ preempt_enable();
+#endif
+ /* we no longer have a valid current FPU state */
+ clear_using_fpu(tsk);
+}
+
+/*
+ * restore the FPU state from a signal context
+ */
+int fpu_restore_sigcontext(struct fpucontext *fpucontext)
+{
+ struct task_struct *tsk = current;
+ int ret;
+
+ /* load up the old FPU state */
+ ret = copy_from_user(&tsk->thread.fpu_state,
+ fpucontext,
+ min(sizeof(struct fpu_state_struct),
+ sizeof(struct fpucontext)));
+ if (!ret)
+ set_using_fpu(tsk);
+
+ return ret;
+}
+
+/*
+ * fill in the FPU structure for a core dump
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg)
+{
+ struct task_struct *tsk = current;
+ int fpvalid;
+
+ fpvalid = is_using_fpu(tsk);
+ if (fpvalid) {
+ unlazy_fpu(tsk);
+ memcpy(fpreg, &tsk->thread.fpu_state, sizeof(*fpreg));
+ }
+
+ return fpvalid;
+}
diff --git a/arch/mn10300/kernel/gdb-cache.S b/arch/mn10300/kernel/gdb-cache.S
new file mode 100644
index 000000000000..1108badc3d32
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-cache.S
@@ -0,0 +1,105 @@
+###############################################################################
+#
+# MN10300 Low-level cache purging routines for gdbstub
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#include <asm/frame.inc>
+#include <asm/serial-regs.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub cache purge
+#
+###############################################################################
+ .type gdbstub_purge_cache,@function
+ENTRY(gdbstub_purge_cache)
+ #######################################################################
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+mn10300_dcache_flush_skip:
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_loop
+
+;; # unconditionally flush and invalidate the dcache
+;; mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+;; mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of
+;; # entries
+;;
+;; gdbstub_purge_cache__dcache_loop:
+;; mov (a1),d0 # unconditional purge
+;;
+;; add L1_CACHE_BYTES,a1
+;; add -1,d1
+;; bne gdbstub_purge_cache__dcache_loop
+
+ #######################################################################
+ # now invalidate the icache
+ mov CHCTR,a0
+ movhu (a0),a1
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the icache
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ movhu a1,(a0)
+ movhu (a0),d0 # read back to flush
+ # (SIGILLs all over without this)
+
+ mov d1,epsw
+
+ ret [],0
+
+ .size gdbstub_purge_cache,.-gdbstub_purge_cache
diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S
new file mode 100644
index 000000000000..c68dcd052201
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-serial-low.S
@@ -0,0 +1,90 @@
+###############################################################################
+#
+# 16550 serial Rx interrupt handler for gdbstub I/O
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/thread_info.h>
+#include <asm/frame.inc>
+#include <asm/intctl-regs.h>
+#include <asm/unit/serial.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub serial receive interrupt entry point
+# - intended to run at interrupt priority 0
+#
+###############################################################################
+ .globl gdbstub_io_rx_handler
+ .type gdbstub_io_rx_handler,@function
+gdbstub_io_rx_handler:
+ movm [d2,d3,a2,a3],(sp)
+
+#if 1
+ movbu (GDBPORT_SERIAL_IIR),d2
+#endif
+
+ mov (gdbstub_rx_inp),a3
+gdbstub_io_rx_more:
+ mov a3,a2
+ add 2,a3
+ and 0x00000fff,a3
+ mov (gdbstub_rx_outp),d3
+ cmp a3,d3
+ beq gdbstub_io_rx_overflow
+
+ movbu (GDBPORT_SERIAL_LSR),d3
+ btst UART_LSR_DR,d3
+ beq gdbstub_io_rx_done
+ movbu (GDBPORT_SERIAL_RX),d2
+ movbu d3,(gdbstub_rx_buffer+1,a2)
+ movbu d2,(gdbstub_rx_buffer,a2)
+ mov a3,(gdbstub_rx_inp)
+ bra gdbstub_io_rx_more
+
+gdbstub_io_rx_done:
+ mov GxICR_DETECT,d2
+ movbu d2,(XIRQxICR(GDBPORT_SERIAL_IRQ)) # ACK the interrupt
+ movhu (XIRQxICR(GDBPORT_SERIAL_IRQ)),d2 # flush
+ movm (sp),[d2,d3,a2,a3]
+ bset 0x01,(gdbstub_busy)
+ beq gdbstub_io_rx_enter
+ rti
+
+gdbstub_io_rx_overflow:
+ bset 0x01,(gdbstub_rx_overflow)
+ bra gdbstub_io_rx_done
+
+gdbstub_io_rx_enter:
+ or EPSW_IE|EPSW_IM_1,epsw
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+ mov 0x280,d1
+
+ mov fp,d0
+ call gdbstub_rx_irq[],0 # gdbstub_rx_irq(regs,excep)
+
+ and ~EPSW_IE,epsw
+ bclr 0x01,(gdbstub_busy)
+
+ .globl gdbstub_return
+gdbstub_return:
+ RESTORE_ALL
+
+ .size gdbstub_io_rx_handler,.-gdbstub_io_rx_handler
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
new file mode 100644
index 000000000000..9a6d4e8ebe73
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -0,0 +1,155 @@
+/* 16550 serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/nmi.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/serial-regs.h>
+#include <asm/unit/serial.h>
+
+/*
+ * initialise the GDB stub
+ */
+void gdbstub_io_init(void)
+{
+ u16 tmp;
+
+ /* set up the serial port */
+ GDBPORT_SERIAL_LCR = UART_LCR_WLEN8; /* 1N8 */
+ GDBPORT_SERIAL_FCR = (UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+
+ FLOWCTL_CLEAR(DTR);
+ FLOWCTL_SET(RTS);
+
+ gdbstub_io_set_baud(115200);
+
+ /* we want to get serial receive interrupts */
+ XIRQxICR(GDBPORT_SERIAL_IRQ) = 0;
+ tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+ IVAR0 = EXCEP_IRQ_LEVEL0;
+ set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+ XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST;
+ XIRQxICR(GDBPORT_SERIAL_IRQ) = GxICR_ENABLE | GxICR_LEVEL_0;
+ tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+ GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
+
+ /* permit level 0 IRQs to take place */
+ asm volatile(
+ " and %0,epsw \n"
+ " or %1,epsw \n"
+ :
+ : "i"(~EPSW_IM), "i"(EPSW_IE | EPSW_IM_1)
+ );
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+ unsigned value;
+ u8 lcr;
+
+ value = 18432000 / 16 / baud;
+
+ lcr = GDBPORT_SERIAL_LCR;
+ GDBPORT_SERIAL_LCR |= UART_LCR_DLAB;
+ GDBPORT_SERIAL_DLL = value & 0xff;
+ GDBPORT_SERIAL_DLM = (value >> 8) & 0xff;
+ GDBPORT_SERIAL_LCR = lcr;
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+ unsigned ix;
+ u8 ch, st;
+
+ *_ch = 0xff;
+
+ if (gdbstub_rx_unget) {
+ *_ch = gdbstub_rx_unget;
+ gdbstub_rx_unget = 0;
+ return 0;
+ }
+
+ try_again:
+ /* pull chars out of the buffer */
+ ix = gdbstub_rx_outp;
+ if (ix == gdbstub_rx_inp) {
+ if (nonblock)
+ return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+ watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+ goto try_again;
+ }
+
+ ch = gdbstub_rx_buffer[ix++];
+ st = gdbstub_rx_buffer[ix++];
+ gdbstub_rx_outp = ix & 0x00000fff;
+
+ if (st & UART_LSR_BI) {
+ gdbstub_proto("### GDB Rx Break Detected ###\n");
+ return -EINTR;
+ } else if (st & (UART_LSR_FE | UART_LSR_OE | UART_LSR_PE)) {
+ gdbstub_proto("### GDB Rx Error (st=%02x) ###\n", st);
+ return -EIO;
+ } else {
+ gdbstub_proto("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+ *_ch = ch & 0x7f;
+ return 0;
+ }
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+ FLOWCTL_SET(DTR);
+ LSR_WAIT_FOR(THRE);
+ /* FLOWCTL_WAIT_FOR(CTS); */
+
+ if (ch == 0x0a) {
+ GDBPORT_SERIAL_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ /* FLOWCTL_WAIT_FOR(CTS); */
+ }
+ GDBPORT_SERIAL_TX = ch;
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_flush(void)
+{
+ LSR_WAIT_FOR(TEMT);
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_CLEAR(DTR);
+}
diff --git a/arch/mn10300/kernel/gdb-io-ttysm-low.S b/arch/mn10300/kernel/gdb-io-ttysm-low.S
new file mode 100644
index 000000000000..677c7876307c
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-ttysm-low.S
@@ -0,0 +1,93 @@
+###############################################################################
+#
+# MN10300 On-chip serial Rx interrupt handler for GDB stub I/O
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/thread_info.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/intctl-regs.h>
+#include <asm/unit/serial.h>
+#include "mn10300-serial.h"
+
+ .text
+
+###############################################################################
+#
+# GDB stub serial receive interrupt entry point
+# - intended to run at interrupt priority 0
+#
+###############################################################################
+ .globl gdbstub_io_rx_handler
+ .type gdbstub_io_rx_handler,@function
+gdbstub_io_rx_handler:
+ movm [d2,d3,a2,a3],(sp)
+
+ mov (gdbstub_rx_inp),a3
+gdbstub_io_rx_more:
+ mov a3,a2
+ add 2,a3
+ and PAGE_SIZE_asm-1,a3
+ mov (gdbstub_rx_outp),d3
+ cmp a3,d3
+ beq gdbstub_io_rx_overflow
+
+ movbu (SCgSTR),d3
+ btst SC01STR_RBF,d3
+ beq gdbstub_io_rx_done
+ movbu (SCgRXB),d2
+ movbu d3,(gdbstub_rx_buffer+1,a2)
+ movbu d2,(gdbstub_rx_buffer,a2)
+ mov a3,(gdbstub_rx_inp)
+ bra gdbstub_io_rx_more
+
+gdbstub_io_rx_done:
+ mov GxICR_DETECT,d2
+ movbu d2,(GxICR(SCgRXIRQ)) # ACK the interrupt
+ movhu (GxICR(SCgRXIRQ)),d2 # flush
+
+ movm (sp),[d2,d3,a2,a3]
+ bset 0x01,(gdbstub_busy)
+ beq gdbstub_io_rx_enter
+ rti
+
+gdbstub_io_rx_overflow:
+ bset 0x01,(gdbstub_rx_overflow)
+ bra gdbstub_io_rx_done
+
+###############################################################################
+#
+# debugging interrupt - enter the GDB stub proper
+#
+###############################################################################
+gdbstub_io_rx_enter:
+ or EPSW_IE|EPSW_IM_1,epsw
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+ mov 0x280,d1
+
+ mov fp,d0
+ call gdbstub_rx_irq[],0 # gdbstub_io_rx_irq(regs,excep)
+
+ and ~EPSW_IE,epsw
+ bclr 0x01,(gdbstub_busy)
+
+ .globl gdbstub_return
+gdbstub_return:
+ RESTORE_ALL
+
+ .size gdbstub_io_rx_handler,.-gdbstub_io_rx_handler
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
new file mode 100644
index 000000000000..c5451592d403
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -0,0 +1,299 @@
+/* MN10300 On-chip serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/unit/clock.h>
+#include "mn10300-serial.h"
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif0;
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif1;
+#else
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif2;
+#endif
+
+
+/*
+ * initialise the GDB stub I/O routines
+ */
+void __init gdbstub_io_init(void)
+{
+ uint16_t scxctr;
+ int tmp;
+
+ switch (gdbstub_port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ gdbstub_port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ gdbstub_port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ /* set up the serial port */
+ gdbstub_io_set_baud(115200);
+
+ /* we want to get serial receive interrupts */
+ set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0);
+ set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0);
+ set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+ *gdbstub_port->rx_icr |= GxICR_ENABLE;
+ tmp = *gdbstub_port->rx_icr;
+
+ /* enable the device */
+ scxctr = SC01CTR_CLN_8BIT; /* 1N8 */
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ scxctr |= SC0CTR_CK_TM8UFLOW_8; /* == SC1CTR_CK_TM9UFLOW_8
+ == SC2CTR_CK_TM10UFLOW_8 */
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ scxctr |= SC0CTR_CK_TM2UFLOW_8;
+ break;
+ }
+
+ scxctr |= SC01CTR_TXE | SC01CTR_RXE;
+
+ *gdbstub_port->_control = scxctr;
+ tmp = *gdbstub_port->_control;
+
+ /* permit level 0 IRQs only */
+ asm volatile(
+ " and %0,epsw \n"
+ " or %1,epsw \n"
+ :
+ : "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1)
+ );
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+ const unsigned bits = 10; /* 1 [start] + 8 [data] + 0 [parity] +
+ * 1 [stop] */
+ unsigned long ioclk = gdbstub_port->ioclk;
+ unsigned xdiv, tmp;
+ uint16_t tmxbr;
+ uint8_t tmxmd;
+
+ if (!baud) {
+ baud = 9600;
+ } else if (baud == 134) {
+ baud = 269; /* 134 is really 134.5 */
+ xdiv = 2;
+ }
+
+try_alternative:
+ xdiv = 1;
+
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+ break;
+ }
+
+ /* as a last resort, if the quotient is zero, default to 9600 bps */
+ baud = 9600;
+ goto try_alternative;
+
+timer_okay:
+ gdbstub_port->uart.timeout = (2 * bits * HZ) / baud;
+ gdbstub_port->uart.timeout += HZ / 50;
+
+ /* set the timer to produce the required baud rate */
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *gdbstub_port->_tmxmd = 0;
+ *gdbstub_port->_tmxbr = tmxbr;
+ *gdbstub_port->_tmxmd = TM8MD_INIT_COUNTER;
+ *gdbstub_port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *gdbstub_port->_tmxmd = 0;
+ *(volatile u8 *) gdbstub_port->_tmxbr = (u8)tmxbr;
+ *gdbstub_port->_tmxmd = TM2MD_INIT_COUNTER;
+ *gdbstub_port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+ unsigned ix;
+ u8 ch, st;
+
+ *_ch = 0xff;
+
+ if (gdbstub_rx_unget) {
+ *_ch = gdbstub_rx_unget;
+ gdbstub_rx_unget = 0;
+ return 0;
+ }
+
+try_again:
+ /* pull chars out of the buffer */
+ ix = gdbstub_rx_outp;
+ if (ix == gdbstub_rx_inp) {
+ if (nonblock)
+ return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+ watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+ goto try_again;
+ }
+
+ ch = gdbstub_rx_buffer[ix++];
+ st = gdbstub_rx_buffer[ix++];
+ gdbstub_rx_outp = ix & (PAGE_SIZE - 1);
+
+ st &= SC01STR_RXF | SC01STR_RBF | SC01STR_FEF | SC01STR_PEF |
+ SC01STR_OEF;
+
+ /* deal with what we've got
+ * - note that the UART doesn't do BREAK-detection for us
+ */
+ if (st & SC01STR_FEF && ch == 0) {
+ switch (gdbstub_port->rx_brk) {
+ case 0: gdbstub_port->rx_brk = 1; goto try_again;
+ case 1: gdbstub_port->rx_brk = 2; goto try_again;
+ case 2:
+ gdbstub_port->rx_brk = 3;
+ gdbstub_proto("### GDB MNSERIAL Rx Break Detected"
+ " ###\n");
+ return -EINTR;
+ default:
+ goto try_again;
+ }
+ } else if (st & SC01STR_FEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Framing Error ###\n");
+ return -EIO;
+ } else if (st & SC01STR_OEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Overrun Error ###\n");
+ return -EIO;
+ } else if (st & SC01STR_PEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Parity Error ###\n");
+ return -EIO;
+ } else {
+ /* look for the tail-end char on a break run */
+ if (gdbstub_port->rx_brk == 3) {
+ switch (ch) {
+ case 0xFF:
+ case 0xFE:
+ case 0xFC:
+ case 0xF8:
+ case 0xF0:
+ case 0xE0:
+ case 0xC0:
+ case 0x80:
+ case 0x00:
+ gdbstub_port->rx_brk = 0;
+ goto try_again;
+ default:
+ break;
+ }
+ }
+
+ gdbstub_port->rx_brk = 0;
+ gdbstub_io("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+ *_ch = ch & 0x7f;
+ return 0;
+ }
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+ while (*gdbstub_port->_status & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ *(u8 *) gdbstub_port->_txb = 0x0d;
+ while (*gdbstub_port->_status & SC01STR_TBF)
+ continue;
+ }
+
+ *(u8 *) gdbstub_port->_txb = ch;
+}
+
+/*
+ * flush the transmission buffers
+ */
+void gdbstub_io_tx_flush(void)
+{
+ while (*gdbstub_port->_status & (SC01STR_TBF | SC01STR_TXF))
+ continue;
+}
diff --git a/arch/mn10300/kernel/gdb-low.S b/arch/mn10300/kernel/gdb-low.S
new file mode 100644
index 000000000000..e2725552cd82
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-low.S
@@ -0,0 +1,115 @@
+###############################################################################
+#
+# MN10300 Low-level gdbstub routines
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#include <asm/frame.inc>
+#include <asm/serial-regs.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub read memory with guard
+# - D0 holds the memory address to read
+# - D1 holds the address to store the byte into
+#
+###############################################################################
+ .globl gdbstub_read_byte_guard
+ .globl gdbstub_read_byte_cont
+ENTRY(gdbstub_read_byte)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_byte_guard:
+ movbu (a0),d1
+gdbstub_read_byte_cont:
+ movbu d1,(a1)
+ ret [],0
+
+ .globl gdbstub_read_word_guard
+ .globl gdbstub_read_word_cont
+ENTRY(gdbstub_read_word)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_word_guard:
+ movhu (a0),d1
+gdbstub_read_word_cont:
+ movhu d1,(a1)
+ ret [],0
+
+ .globl gdbstub_read_dword_guard
+ .globl gdbstub_read_dword_cont
+ENTRY(gdbstub_read_dword)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_dword_guard:
+ mov (a0),d1
+gdbstub_read_dword_cont:
+ mov d1,(a1)
+ ret [],0
+
+###############################################################################
+#
+# GDB stub write memory with guard
+# - D0 holds the byte to store
+# - D1 holds the memory address to write
+#
+###############################################################################
+ .globl gdbstub_write_byte_guard
+ .globl gdbstub_write_byte_cont
+ENTRY(gdbstub_write_byte)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_byte_guard:
+ movbu a0,(a1)
+gdbstub_write_byte_cont:
+ ret [],0
+
+ .globl gdbstub_write_word_guard
+ .globl gdbstub_write_word_cont
+ENTRY(gdbstub_write_word)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_word_guard:
+ movhu a0,(a1)
+gdbstub_write_word_cont:
+ ret [],0
+
+ .globl gdbstub_write_dword_guard
+ .globl gdbstub_write_dword_cont
+ENTRY(gdbstub_write_dword)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_dword_guard:
+ mov a0,(a1)
+gdbstub_write_dword_cont:
+ ret [],0
+
+###############################################################################
+#
+# GDB stub BUG() trap
+#
+###############################################################################
+ENTRY(__gdbstub_bug_trap)
+ .byte 0xF7,0xF7 # don't use 0xFF as the JTAG unit preempts that
+ ret [],0
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
new file mode 100644
index 000000000000..21891c71d549
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -0,0 +1,1947 @@
+/* MN10300 GDB stub
+ *
+ * Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ * Contributed by HP Systems
+ *
+ * Modified for SPARC by Stu Grossman, Cygnus Support.
+ *
+ * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ * Copyright (C) 1995 Andreas Busse
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified for Linux/mn10300 by David Howells <dhowells@redhat.com>
+ */
+
+/*
+ * To enable debugger support, two things need to happen. One, a
+ * call to set_debug_traps() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint(). Breakpoint()
+ * simulates a breakpoint by executing a BREAK instruction.
+ *
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
+ * baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ *
+ * ==============
+ * MORE EXAMPLES:
+ * ==============
+ *
+ * For reference -- the following are the steps that one
+ * company took (RidgeRun Inc) to get remote gdb debugging
+ * going. In this scenario the host machine was a PC and the
+ * target platform was a Galileo EVB64120A MIPS evaluation
+ * board.
+ *
+ * Step 1:
+ * First download gdb-5.0.tar.gz from the internet.
+ * and then build/install the package.
+ *
+ * Example:
+ * $ tar zxf gdb-5.0.tar.gz
+ * $ cd gdb-5.0
+ * $ ./configure --target=am33_2.0-linux-gnu
+ * $ make
+ * $ install
+ * am33_2.0-linux-gnu-gdb
+ *
+ * Step 2:
+ * Configure linux for remote debugging and build it.
+ *
+ * Example:
+ * $ cd ~/linux
+ * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
+ * $ make dep; make vmlinux
+ *
+ * Step 3:
+ * Download the kernel to the remote target and start
+ * the kernel running. It will promptly halt and wait
+ * for the host gdb session to connect. It does this
+ * since the "Kernel Hacking" option has defined
+ * CONFIG_REMOTE_DEBUG which in turn enables your calls
+ * to:
+ * set_debug_traps();
+ * breakpoint();
+ *
+ * Step 4:
+ * Start the gdb session on the host.
+ *
+ * Example:
+ * $ am33_2.0-linux-gnu-gdb vmlinux
+ * (gdb) set remotebaud 115200
+ * (gdb) target remote /dev/ttyS1
+ * ...at this point you are connected to
+ * the remote target and can use gdb
+ * in the normal fasion. Setting
+ * breakpoints, single stepping,
+ * printing variables, etc.
+ *
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/cacheflush.h>
+#include <asm/serial-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/unit/serial.h>
+
+/* define to use F7F7 rather than FF which is subverted by JTAG debugger */
+#undef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 2048
+
+static const char gdbstub_banner[] =
+ "Linux/MN10300 GDB Stub (c) RedHat 2007\n";
+
+u8 gdbstub_rx_buffer[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+u32 gdbstub_rx_inp;
+u32 gdbstub_rx_outp;
+u8 gdbstub_busy;
+u8 gdbstub_rx_overflow;
+u8 gdbstub_rx_unget;
+
+static u8 gdbstub_flush_caches;
+static char input_buffer[BUFMAX];
+static char output_buffer[BUFMAX];
+static char trans_buffer[BUFMAX];
+
+static const char hexchars[] = "0123456789abcdef";
+
+struct gdbstub_bkpt {
+ u8 *addr; /* address of breakpoint */
+ u8 len; /* size of breakpoint */
+ u8 origbytes[7]; /* original bytes */
+};
+
+static struct gdbstub_bkpt gdbstub_bkpts[256];
+
+/*
+ * local prototypes
+ */
+static void getpacket(char *buffer);
+static int putpacket(char *buffer);
+static int computeSignal(enum exception_code excep);
+static int hex(unsigned char ch);
+static int hexToInt(char **ptr, int *intValue);
+static unsigned char *mem2hex(const void *mem, char *buf, int count,
+ int may_fault);
+static const char *hex2mem(const char *buf, void *_mem, int count,
+ int may_fault);
+
+/*
+ * Convert ch from a hex digit to an int
+ */
+static int hex(unsigned char ch)
+{
+ if (ch >= 'a' && ch <= 'f')
+ return ch - 'a' + 10;
+ if (ch >= '0' && ch <= '9')
+ return ch - '0';
+ if (ch >= 'A' && ch <= 'F')
+ return ch - 'A' + 10;
+ return -1;
+}
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+
+void debug_to_serial(const char *p, int n)
+{
+ __debug_to_serial(p, n);
+ /* gdbstub_console_write(NULL, p, n); */
+}
+
+void gdbstub_printk(const char *fmt, ...)
+{
+ va_list args;
+ int len;
+
+ /* Emit the output into the temporary buffer */
+ va_start(args, fmt);
+ len = vsnprintf(trans_buffer, sizeof(trans_buffer), fmt, args);
+ va_end(args);
+ debug_to_serial(trans_buffer, len);
+}
+
+#endif
+
+static inline char *gdbstub_strcpy(char *dst, const char *src)
+{
+ int loop = 0;
+ while ((dst[loop] = src[loop]))
+ loop++;
+ return dst;
+}
+
+/*
+ * scan for the sequence $<data>#<checksum>
+ */
+static void getpacket(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char xmitcsum;
+ unsigned char ch;
+ int count, i, ret, error;
+
+ for (;;) {
+ /*
+ * wait around for the start character,
+ * ignore all other characters
+ */
+ do {
+ gdbstub_io_rx_char(&ch, 0);
+ } while (ch != '$');
+
+ checksum = 0;
+ xmitcsum = -1;
+ count = 0;
+ error = 0;
+
+ /*
+ * now, read until a # or end of buffer is found
+ */
+ while (count < BUFMAX) {
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+
+ if (ch == '#')
+ break;
+ checksum += ch;
+ buffer[count] = ch;
+ count++;
+ }
+
+ if (error == -EIO) {
+ gdbstub_proto("### GDB Rx Error - Skipping packet"
+ " ###\n");
+ gdbstub_proto("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-');
+ continue;
+ }
+
+ if (count >= BUFMAX || error)
+ continue;
+
+ buffer[count] = 0;
+
+ /* read the checksum */
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+ xmitcsum = hex(ch) << 4;
+
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+ xmitcsum |= hex(ch);
+
+ if (error) {
+ if (error == -EIO)
+ gdbstub_io("### GDB Rx Error -"
+ " Skipping packet\n");
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-');
+ continue;
+ }
+
+ /* check the checksum */
+ if (checksum != xmitcsum) {
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-'); /* failed checksum */
+ continue;
+ }
+
+ gdbstub_proto("### GDB Rx '$%s#%02x' ###\n", buffer, checksum);
+ gdbstub_io("### GDB Tx ACK\n");
+ gdbstub_io_tx_char('+'); /* successful transfer */
+
+ /*
+ * if a sequence char is present,
+ * reply the sequence ID
+ */
+ if (buffer[2] == ':') {
+ gdbstub_io_tx_char(buffer[0]);
+ gdbstub_io_tx_char(buffer[1]);
+
+ /*
+ * remove sequence chars from buffer
+ */
+ count = 0;
+ while (buffer[count])
+ count++;
+ for (i = 3; i <= count; i++)
+ buffer[i - 3] = buffer[i];
+ }
+
+ break;
+ }
+}
+
+/*
+ * send the packet in buffer.
+ * - return 0 if successfully ACK'd
+ * - return 1 if abandoned due to new incoming packet
+ */
+static int putpacket(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char ch;
+ int count;
+
+ /*
+ * $<packet info>#<checksum>.
+ */
+ gdbstub_proto("### GDB Tx $'%s'#?? ###\n", buffer);
+
+ do {
+ gdbstub_io_tx_char('$');
+ checksum = 0;
+ count = 0;
+
+ while ((ch = buffer[count]) != 0) {
+ gdbstub_io_tx_char(ch);
+ checksum += ch;
+ count += 1;
+ }
+
+ gdbstub_io_tx_char('#');
+ gdbstub_io_tx_char(hexchars[checksum >> 4]);
+ gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+
+ } while (gdbstub_io_rx_char(&ch, 0),
+ ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
+ ch != '-' && ch != '+' &&
+ (gdbstub_io("### GDB Rx ??? %02x\n", ch), 0),
+ ch != '+' && ch != '$');
+
+ if (ch == '+') {
+ gdbstub_io("### GDB Rx ACK\n");
+ return 0;
+ }
+
+ gdbstub_io("### GDB Tx Abandoned\n");
+ gdbstub_rx_unget = ch;
+ return 1;
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+static int hexToInt(char **ptr, int *intValue)
+{
+ int numChars = 0;
+ int hexValue;
+
+ *intValue = 0;
+
+ while (**ptr) {
+ hexValue = hex(**ptr);
+ if (hexValue < 0)
+ break;
+
+ *intValue = (*intValue << 4) | hexValue;
+ numChars++;
+
+ (*ptr)++;
+ }
+
+ return (numChars);
+}
+
+/*
+ * We single-step by setting breakpoints. When an exception
+ * is handled, we need to restore the instructions hoisted
+ * when the breakpoints were set.
+ *
+ * This is where we save the original instructions.
+ */
+static struct gdb_bp_save {
+ u8 *addr;
+ u8 opcode[2];
+} step_bp[2];
+
+static const unsigned char gdbstub_insn_sizes[256] =
+{
+ /* 1 2 3 4 5 6 7 8 9 a b c d e f */
+ 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+ 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+ 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+ 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */
+};
+
+static int __gdbstub_mark_bp(u8 *addr, int ix)
+{
+ if (addr < (u8 *) 0x70000000UL)
+ return 0;
+ /* 70000000-7fffffff: vmalloc area */
+ if (addr < (u8 *) 0x80000000UL)
+ goto okay;
+ if (addr < (u8 *) 0x8c000000UL)
+ return 0;
+ /* 8c000000-93ffffff: SRAM, SDRAM */
+ if (addr < (u8 *) 0x94000000UL)
+ goto okay;
+ return 0;
+
+okay:
+ if (gdbstub_read_byte(addr + 0, &step_bp[ix].opcode[0]) < 0 ||
+ gdbstub_read_byte(addr + 1, &step_bp[ix].opcode[1]) < 0)
+ return 0;
+
+ step_bp[ix].addr = addr;
+ return 1;
+}
+
+static inline void __gdbstub_restore_bp(void)
+{
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (step_bp[0].addr) {
+ gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0);
+ gdbstub_write_byte(step_bp[0].opcode[1], step_bp[0].addr + 1);
+ }
+ if (step_bp[1].addr) {
+ gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0);
+ gdbstub_write_byte(step_bp[1].opcode[1], step_bp[1].addr + 1);
+ }
+#else
+ if (step_bp[0].addr)
+ gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0);
+ if (step_bp[1].addr)
+ gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0);
+#endif
+
+ gdbstub_flush_caches = 1;
+
+ step_bp[0].addr = NULL;
+ step_bp[0].opcode[0] = 0;
+ step_bp[0].opcode[1] = 0;
+ step_bp[1].addr = NULL;
+ step_bp[1].opcode[0] = 0;
+ step_bp[1].opcode[1] = 0;
+}
+
+/*
+ * emulate single stepping by means of breakpoint instructions
+ */
+static int gdbstub_single_step(struct pt_regs *regs)
+{
+ unsigned size;
+ uint32_t x;
+ uint8_t cur, *pc, *sp;
+
+ step_bp[0].addr = NULL;
+ step_bp[0].opcode[0] = 0;
+ step_bp[0].opcode[1] = 0;
+ step_bp[1].addr = NULL;
+ step_bp[1].opcode[0] = 0;
+ step_bp[1].opcode[1] = 0;
+ x = 0;
+
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+ if (gdbstub_read_byte(pc, &cur) < 0)
+ return -EFAULT;
+
+ gdbstub_bkpt("Single Step from %p { %02x }\n", pc, cur);
+
+ gdbstub_flush_caches = 1;
+
+ size = gdbstub_insn_sizes[cur];
+ if (size > 0) {
+ if (!__gdbstub_mark_bp(pc + size, 0))
+ goto fault;
+ } else {
+ switch (cur) {
+ /* Bxx (d8,PC) */
+ case 0xc0:
+ case 0xc1:
+ case 0xc2:
+ case 0xc3:
+ case 0xc4:
+ case 0xc5:
+ case 0xc6:
+ case 0xc7:
+ case 0xc8:
+ case 0xc9:
+ case 0xca:
+ if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + 2, 0))
+ goto fault;
+ if ((x < 0 || x > 2) &&
+ !__gdbstub_mark_bp(pc + (s8) x, 1))
+ goto fault;
+ break;
+
+ /* LXX (d8,PC) */
+ case 0xd0:
+ case 0xd1:
+ case 0xd2:
+ case 0xd3:
+ case 0xd4:
+ case 0xd5:
+ case 0xd6:
+ case 0xd7:
+ case 0xd8:
+ case 0xd9:
+ case 0xda:
+ if (!__gdbstub_mark_bp(pc + 1, 0))
+ goto fault;
+ if (regs->pc != regs->lar &&
+ !__gdbstub_mark_bp((u8 *) regs->lar, 1))
+ goto fault;
+ break;
+
+ /* SETLB - loads the next for bytes into the LIR
+ * register */
+ case 0xdb:
+ if (!__gdbstub_mark_bp(pc + 1, 0))
+ goto fault;
+ break;
+
+ /* JMP (d16,PC) or CALL (d16,PC) */
+ case 0xcc:
+ case 0xcd:
+ if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s16) x, 0))
+ goto fault;
+ break;
+
+ /* JMP (d32,PC) or CALL (d32,PC) */
+ case 0xdc:
+ case 0xdd:
+ if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(pc + 3, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(pc + 4, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s32) x, 0))
+ goto fault;
+ break;
+
+ /* RETF */
+ case 0xde:
+ if (!__gdbstub_mark_bp((u8 *) regs->mdr, 0))
+ goto fault;
+ break;
+
+ /* RET */
+ case 0xdf:
+ if (gdbstub_read_byte(pc + 2, (u8 *) &x) < 0)
+ goto fault;
+ sp += (s8)x;
+ if (gdbstub_read_byte(sp + 0, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(sp + 1, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(sp + 2, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(sp + 3, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ break;
+
+ case 0xf0:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+
+ if (cur >= 0xf0 && cur <= 0xf7) {
+ /* JMP (An) / CALLS (An) */
+ switch (cur & 3) {
+ case 0: x = regs->a0; break;
+ case 1: x = regs->a1; break;
+ case 2: x = regs->a2; break;
+ case 3: x = regs->a3; break;
+ }
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else if (cur == 0xfc) {
+ /* RETS */
+ if (gdbstub_read_byte(
+ sp + 0, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ sp + 1, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ sp + 2, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ sp + 3, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else if (cur == 0xfd) {
+ /* RTI */
+ if (gdbstub_read_byte(
+ sp + 4, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ sp + 5, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ sp + 6, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ sp + 7, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(pc + 2, 0))
+ goto fault;
+ }
+
+ break;
+
+ /* potential 3-byte conditional branches */
+ case 0xf8:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + 3, 0))
+ goto fault;
+
+ if (cur >= 0xe8 && cur <= 0xeb) {
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0)
+ goto fault;
+ if ((x < 0 || x > 3) &&
+ !__gdbstub_mark_bp(pc + (s8) x, 1))
+ goto fault;
+ }
+ break;
+
+ case 0xfa:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+
+ if (cur == 0xff) {
+ /* CALLS (d16,PC) */
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ pc + 3, ((u8 *) &x) + 1) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s16) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(pc + 4, 0))
+ goto fault;
+ }
+ break;
+
+ case 0xfc:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+ if (cur == 0xff) {
+ /* CALLS (d32,PC) */
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ pc + 3, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ pc + 4, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ pc + 5, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(
+ pc + (s32) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(
+ pc + 6, 0))
+ goto fault;
+ }
+ break;
+
+ }
+ }
+
+ gdbstub_bkpt("Step: %02x at %p; %02x at %p\n",
+ step_bp[0].opcode[0], step_bp[0].addr,
+ step_bp[1].opcode[0], step_bp[1].addr);
+
+ if (step_bp[0].addr) {
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (gdbstub_write_byte(0xF7, step_bp[0].addr + 0) < 0 ||
+ gdbstub_write_byte(0xF7, step_bp[0].addr + 1) < 0)
+ goto fault;
+#else
+ if (gdbstub_write_byte(0xFF, step_bp[0].addr + 0) < 0)
+ goto fault;
+#endif
+ }
+
+ if (step_bp[1].addr) {
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (gdbstub_write_byte(0xF7, step_bp[1].addr + 0) < 0 ||
+ gdbstub_write_byte(0xF7, step_bp[1].addr + 1) < 0)
+ goto fault;
+#else
+ if (gdbstub_write_byte(0xFF, step_bp[1].addr + 0) < 0)
+ goto fault;
+#endif
+ }
+
+ return 0;
+
+ fault:
+ /* uh-oh - silly address alert, try and restore things */
+ __gdbstub_restore_bp();
+ return -EFAULT;
+}
+
+#ifdef CONFIG_GDBSTUB_CONSOLE
+
+void gdbstub_console_write(struct console *con, const char *p, unsigned n)
+{
+ static const char gdbstub_cr[] = { 0x0d };
+ char outbuf[26];
+ int qty;
+ u8 busy;
+
+ busy = gdbstub_busy;
+ gdbstub_busy = 1;
+
+ outbuf[0] = 'O';
+
+ while (n > 0) {
+ qty = 1;
+
+ while (n > 0 && qty < 20) {
+ mem2hex(p, outbuf + qty, 2, 0);
+ qty += 2;
+ if (*p == 0x0a) {
+ mem2hex(gdbstub_cr, outbuf + qty, 2, 0);
+ qty += 2;
+ }
+ p++;
+ n--;
+ }
+
+ outbuf[qty] = 0;
+ putpacket(outbuf);
+ }
+
+ gdbstub_busy = busy;
+}
+
+static kdev_t gdbstub_console_dev(struct console *con)
+{
+ return MKDEV(1, 3); /* /dev/null */
+}
+
+static struct console gdbstub_console = {
+ .name = "gdb",
+ .write = gdbstub_console_write,
+ .device = gdbstub_console_dev,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+#endif
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in buf.
+ * - if successful, return a pointer to the last char put in buf (NUL)
+ * - in case of mem fault, return NULL
+ * may_fault is non-zero if we are reading from arbitrary memory, but is
+ * currently not used.
+ */
+static
+unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
+{
+ const u8 *mem = _mem;
+ u8 ch[4];
+
+ if ((u32) mem & 1 && count >= 1) {
+ if (gdbstub_read_byte(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ mem++;
+ count--;
+ }
+
+ if ((u32) mem & 3 && count >= 2) {
+ if (gdbstub_read_word(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ mem += 2;
+ count -= 2;
+ }
+
+ while (count >= 4) {
+ if (gdbstub_read_dword(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ *buf++ = hexchars[ch[2] >> 4];
+ *buf++ = hexchars[ch[2] & 0xf];
+ *buf++ = hexchars[ch[3] >> 4];
+ *buf++ = hexchars[ch[3] & 0xf];
+ mem += 4;
+ count -= 4;
+ }
+
+ if (count >= 2) {
+ if (gdbstub_read_word(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ mem += 2;
+ count -= 2;
+ }
+
+ if (count >= 1) {
+ if (gdbstub_read_byte(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ }
+
+ *buf = 0;
+ return buf;
+}
+
+/*
+ * convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written
+ * may_fault is non-zero if we are reading from arbitrary memory, but is
+ * currently not used.
+ */
+static
+const char *hex2mem(const char *buf, void *_mem, int count, int may_fault)
+{
+ u8 *mem = _mem;
+ union {
+ u32 val;
+ u8 b[4];
+ } ch;
+
+ if ((u32) mem & 1 && count >= 1) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ if (gdbstub_write_byte(ch.val, mem) != 0)
+ return 0;
+ mem++;
+ count--;
+ }
+
+ if ((u32) mem & 3 && count >= 2) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ if (gdbstub_write_word(ch.val, mem) != 0)
+ return 0;
+ mem += 2;
+ count -= 2;
+ }
+
+ while (count >= 4) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ ch.b[2] = hex(*buf++) << 4;
+ ch.b[2] |= hex(*buf++);
+ ch.b[3] = hex(*buf++) << 4;
+ ch.b[3] |= hex(*buf++);
+ if (gdbstub_write_dword(ch.val, mem) != 0)
+ return 0;
+ mem += 4;
+ count -= 4;
+ }
+
+ if (count >= 2) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ if (gdbstub_write_word(ch.val, mem) != 0)
+ return 0;
+ mem += 2;
+ count -= 2;
+ }
+
+ if (count >= 1) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ if (gdbstub_write_byte(ch.val, mem) != 0)
+ return 0;
+ }
+
+ return buf;
+}
+
+/*
+ * This table contains the mapping between MN10300 exception codes, and
+ * signals, which are primarily what GDB understands. It also indicates
+ * which hardware traps we need to commandeer when initializing the stub.
+ */
+static const struct excep_to_sig_map {
+ enum exception_code excep; /* MN10300 exception code */
+ unsigned char signo; /* Signal that we map this into */
+} excep_to_sig_map[] = {
+ { EXCEP_ITLBMISS, SIGSEGV },
+ { EXCEP_DTLBMISS, SIGSEGV },
+ { EXCEP_TRAP, SIGTRAP },
+ { EXCEP_ISTEP, SIGTRAP },
+ { EXCEP_IBREAK, SIGTRAP },
+ { EXCEP_OBREAK, SIGTRAP },
+ { EXCEP_UNIMPINS, SIGILL },
+ { EXCEP_UNIMPEXINS, SIGILL },
+ { EXCEP_MEMERR, SIGSEGV },
+ { EXCEP_MISALIGN, SIGSEGV },
+ { EXCEP_BUSERROR, SIGBUS },
+ { EXCEP_ILLINSACC, SIGSEGV },
+ { EXCEP_ILLDATACC, SIGSEGV },
+ { EXCEP_IOINSACC, SIGSEGV },
+ { EXCEP_PRIVINSACC, SIGSEGV },
+ { EXCEP_PRIVDATACC, SIGSEGV },
+ { EXCEP_FPU_DISABLED, SIGFPE },
+ { EXCEP_FPU_UNIMPINS, SIGFPE },
+ { EXCEP_FPU_OPERATION, SIGFPE },
+ { EXCEP_WDT, SIGALRM },
+ { EXCEP_NMI, SIGQUIT },
+ { EXCEP_IRQ_LEVEL0, SIGINT },
+ { EXCEP_IRQ_LEVEL1, SIGINT },
+ { EXCEP_IRQ_LEVEL2, SIGINT },
+ { EXCEP_IRQ_LEVEL3, SIGINT },
+ { EXCEP_IRQ_LEVEL4, SIGINT },
+ { EXCEP_IRQ_LEVEL5, SIGINT },
+ { EXCEP_IRQ_LEVEL6, SIGINT },
+ { 0, 0}
+};
+
+/*
+ * convert the MN10300 exception code into a UNIX signal number
+ */
+static int computeSignal(enum exception_code excep)
+{
+ const struct excep_to_sig_map *map;
+
+ for (map = excep_to_sig_map; map->signo; map++)
+ if (map->excep == excep)
+ return map->signo;
+
+ return SIGHUP; /* default for things we don't know about */
+}
+
+static u32 gdbstub_fpcr, gdbstub_fpufs_array[32];
+
+/*
+ *
+ */
+static void gdbstub_store_fpu(void)
+{
+#ifdef CONFIG_FPU
+
+ asm volatile(
+ "or %2,epsw\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ "nop\n"
+ "nop\n"
+#endif
+ "mov %1, a1\n"
+ "fmov fs0, (a1+)\n"
+ "fmov fs1, (a1+)\n"
+ "fmov fs2, (a1+)\n"
+ "fmov fs3, (a1+)\n"
+ "fmov fs4, (a1+)\n"
+ "fmov fs5, (a1+)\n"
+ "fmov fs6, (a1+)\n"
+ "fmov fs7, (a1+)\n"
+ "fmov fs8, (a1+)\n"
+ "fmov fs9, (a1+)\n"
+ "fmov fs10, (a1+)\n"
+ "fmov fs11, (a1+)\n"
+ "fmov fs12, (a1+)\n"
+ "fmov fs13, (a1+)\n"
+ "fmov fs14, (a1+)\n"
+ "fmov fs15, (a1+)\n"
+ "fmov fs16, (a1+)\n"
+ "fmov fs17, (a1+)\n"
+ "fmov fs18, (a1+)\n"
+ "fmov fs19, (a1+)\n"
+ "fmov fs20, (a1+)\n"
+ "fmov fs21, (a1+)\n"
+ "fmov fs22, (a1+)\n"
+ "fmov fs23, (a1+)\n"
+ "fmov fs24, (a1+)\n"
+ "fmov fs25, (a1+)\n"
+ "fmov fs26, (a1+)\n"
+ "fmov fs27, (a1+)\n"
+ "fmov fs28, (a1+)\n"
+ "fmov fs29, (a1+)\n"
+ "fmov fs30, (a1+)\n"
+ "fmov fs31, (a1+)\n"
+ "fmov fpcr, %0\n"
+ : "=d"(gdbstub_fpcr)
+ : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE)
+ : "a1"
+ );
+#endif
+}
+
+/*
+ *
+ */
+static void gdbstub_load_fpu(void)
+{
+#ifdef CONFIG_FPU
+
+ asm volatile(
+ "or %1,epsw\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ "nop\n"
+ "nop\n"
+#endif
+ "mov %0, a1\n"
+ "fmov (a1+), fs0\n"
+ "fmov (a1+), fs1\n"
+ "fmov (a1+), fs2\n"
+ "fmov (a1+), fs3\n"
+ "fmov (a1+), fs4\n"
+ "fmov (a1+), fs5\n"
+ "fmov (a1+), fs6\n"
+ "fmov (a1+), fs7\n"
+ "fmov (a1+), fs8\n"
+ "fmov (a1+), fs9\n"
+ "fmov (a1+), fs10\n"
+ "fmov (a1+), fs11\n"
+ "fmov (a1+), fs12\n"
+ "fmov (a1+), fs13\n"
+ "fmov (a1+), fs14\n"
+ "fmov (a1+), fs15\n"
+ "fmov (a1+), fs16\n"
+ "fmov (a1+), fs17\n"
+ "fmov (a1+), fs18\n"
+ "fmov (a1+), fs19\n"
+ "fmov (a1+), fs20\n"
+ "fmov (a1+), fs21\n"
+ "fmov (a1+), fs22\n"
+ "fmov (a1+), fs23\n"
+ "fmov (a1+), fs24\n"
+ "fmov (a1+), fs25\n"
+ "fmov (a1+), fs26\n"
+ "fmov (a1+), fs27\n"
+ "fmov (a1+), fs28\n"
+ "fmov (a1+), fs29\n"
+ "fmov (a1+), fs30\n"
+ "fmov (a1+), fs31\n"
+ "fmov %2, fpcr\n"
+ :
+ : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE), "d"(gdbstub_fpcr)
+ : "a1"
+ );
+#endif
+}
+
+/*
+ * set a software breakpoint
+ */
+int gdbstub_set_breakpoint(u8 *addr, int len)
+{
+ int bkpt, loop, xloop;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ len = (len + 1) & ~1;
+#endif
+
+ gdbstub_bkpt("setbkpt(%p,%d)\n", addr, len);
+
+ for (bkpt = 255; bkpt >= 0; bkpt--)
+ if (!gdbstub_bkpts[bkpt].addr)
+ break;
+ if (bkpt < 0)
+ return -ENOSPC;
+
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_read_byte(&addr[loop],
+ &gdbstub_bkpts[bkpt].origbytes[loop]
+ ) < 0)
+ return -EFAULT;
+
+ gdbstub_flush_caches = 1;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(0xF7, &addr[loop]) < 0)
+ goto restore;
+#else
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(0xFF, &addr[loop]) < 0)
+ goto restore;
+#endif
+
+ gdbstub_bkpts[bkpt].addr = addr;
+ gdbstub_bkpts[bkpt].len = len;
+
+ gdbstub_bkpt("Set BKPT[%02x]: %p-%p {%02x%02x%02x%02x%02x%02x%02x}\n",
+ bkpt,
+ gdbstub_bkpts[bkpt].addr,
+ gdbstub_bkpts[bkpt].addr + gdbstub_bkpts[bkpt].len - 1,
+ gdbstub_bkpts[bkpt].origbytes[0],
+ gdbstub_bkpts[bkpt].origbytes[1],
+ gdbstub_bkpts[bkpt].origbytes[2],
+ gdbstub_bkpts[bkpt].origbytes[3],
+ gdbstub_bkpts[bkpt].origbytes[4],
+ gdbstub_bkpts[bkpt].origbytes[5],
+ gdbstub_bkpts[bkpt].origbytes[6]
+ );
+
+ return 0;
+
+restore:
+ for (xloop = 0; xloop < loop; xloop++)
+ gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[xloop],
+ addr + xloop);
+ return -EFAULT;
+}
+
+/*
+ * clear a software breakpoint
+ */
+int gdbstub_clear_breakpoint(u8 *addr, int len)
+{
+ int bkpt, loop;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ len = (len + 1) & ~1;
+#endif
+
+ gdbstub_bkpt("clearbkpt(%p,%d)\n", addr, len);
+
+ for (bkpt = 255; bkpt >= 0; bkpt--)
+ if (gdbstub_bkpts[bkpt].addr == addr &&
+ gdbstub_bkpts[bkpt].len == len)
+ break;
+ if (bkpt < 0)
+ return -ENOENT;
+
+ gdbstub_bkpts[bkpt].addr = NULL;
+
+ gdbstub_flush_caches = 1;
+
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[loop],
+ addr + loop) < 0)
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * This function does all command processing for interfacing to gdb
+ * - returns 1 if the exception should be skipped, 0 otherwise.
+ */
+static int gdbstub(struct pt_regs *regs, enum exception_code excep)
+{
+ unsigned long *stack;
+ unsigned long epsw, mdr;
+ uint32_t zero, ssp;
+ uint8_t broke;
+ char *ptr;
+ int sigval;
+ int addr;
+ int length;
+ int loop;
+
+ if (excep == EXCEP_FPU_DISABLED)
+ return 0;
+
+ gdbstub_flush_caches = 0;
+
+ mn10300_set_gdbleds(1);
+
+ asm volatile("mov mdr,%0" : "=d"(mdr));
+ asm volatile("mov epsw,%0" : "=d"(epsw));
+ asm volatile("mov %0,epsw"
+ :: "d"((epsw & ~EPSW_IM) | EPSW_IE | EPSW_IM_1));
+
+ gdbstub_store_fpu();
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ /* skip the initial pause loop */
+ if (regs->pc == (unsigned long) __gdbstub_pause)
+ regs->pc = (unsigned long) start_kernel;
+#endif
+
+ /* if we were single stepping, restore the opcodes hoisted for the
+ * breakpoint[s] */
+ broke = 0;
+ if ((step_bp[0].addr && step_bp[0].addr == (u8 *) regs->pc) ||
+ (step_bp[1].addr && step_bp[1].addr == (u8 *) regs->pc))
+ broke = 1;
+
+ __gdbstub_restore_bp();
+
+ if (gdbstub_rx_unget) {
+ sigval = SIGINT;
+ if (gdbstub_rx_unget != 3)
+ goto packet_waiting;
+ gdbstub_rx_unget = 0;
+ }
+
+ stack = (unsigned long *) regs->sp;
+ sigval = broke ? SIGTRAP : computeSignal(excep);
+
+ /* send information about a BUG() */
+ if (!user_mode(regs) && excep == EXCEP_SYSCALL15) {
+ const struct bug_entry *bug;
+
+ bug = find_bug(regs->pc);
+ if (bug)
+ goto found_bug;
+ length = snprintf(trans_buffer, sizeof(trans_buffer),
+ "BUG() at address %lx\n", regs->pc);
+ goto send_bug_pkt;
+
+ found_bug:
+ length = snprintf(trans_buffer, sizeof(trans_buffer),
+ "BUG() at address %lx (%s:%d)\n",
+ regs->pc, bug->file, bug->line);
+
+ send_bug_pkt:
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(trans_buffer, ptr, length, 0);
+ *ptr = 0;
+ putpacket(output_buffer);
+
+ regs->pc -= 2;
+ sigval = SIGABRT;
+ } else if (regs->pc == (unsigned long) __gdbstub_bug_trap) {
+ regs->pc = regs->mdr;
+ sigval = SIGABRT;
+ }
+
+ /*
+ * send a message to the debugger's user saying what happened if it may
+ * not be clear cut (we can't map exceptions onto signals properly)
+ */
+ if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) {
+ static const char title[] = "Excep ", tbcberr[] = "BCBERR ";
+ static const char crlf[] = "\r\n";
+ char hx;
+ u32 bcberr = BCBERR;
+
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
+
+ hx = hexchars[(excep & 0xf000) >> 12];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x0f00) >> 8];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x00f0) >> 4];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x000f)];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+
+ ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+ *ptr = 0;
+ putpacket(output_buffer); /* send it off... */
+
+ /* BCBERR */
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
+
+ hx = hexchars[(bcberr & 0xf0000000) >> 28];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0f000000) >> 24];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x00f00000) >> 20];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x000f0000) >> 16];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0000f000) >> 12];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x00000f00) >> 8];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x000000f0) >> 4];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0000000f)];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+
+ ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+ *ptr = 0;
+ putpacket(output_buffer); /* send it off... */
+ }
+
+ /*
+ * tell the debugger that an exception has occurred
+ */
+ ptr = output_buffer;
+
+ /*
+ * Send trap type (converted to signal)
+ */
+ *ptr++ = 'T';
+ *ptr++ = hexchars[sigval >> 4];
+ *ptr++ = hexchars[sigval & 0xf];
+
+ /*
+ * Send Error PC
+ */
+ *ptr++ = hexchars[GDB_REGID_PC >> 4];
+ *ptr++ = hexchars[GDB_REGID_PC & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(&regs->pc, ptr, 4, 0);
+ *ptr++ = ';';
+
+ /*
+ * Send frame pointer
+ */
+ *ptr++ = hexchars[GDB_REGID_FP >> 4];
+ *ptr++ = hexchars[GDB_REGID_FP & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(&regs->a3, ptr, 4, 0);
+ *ptr++ = ';';
+
+ /*
+ * Send stack pointer
+ */
+ ssp = (unsigned long) (regs + 1);
+ *ptr++ = hexchars[GDB_REGID_SP >> 4];
+ *ptr++ = hexchars[GDB_REGID_SP & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(&ssp, ptr, 4, 0);
+ *ptr++ = ';';
+
+ *ptr++ = 0;
+ putpacket(output_buffer); /* send it off... */
+
+packet_waiting:
+ /*
+ * Wait for input from remote GDB
+ */
+ while (1) {
+ output_buffer[0] = 0;
+ getpacket(input_buffer);
+
+ switch (input_buffer[0]) {
+ /* request repeat of last signal number */
+ case '?':
+ output_buffer[0] = 'S';
+ output_buffer[1] = hexchars[sigval >> 4];
+ output_buffer[2] = hexchars[sigval & 0xf];
+ output_buffer[3] = 0;
+ break;
+
+ case 'd':
+ /* toggle debug flag */
+ break;
+
+ /*
+ * Return the value of the CPU registers
+ */
+ case 'g':
+ zero = 0;
+ ssp = (u32) (regs + 1);
+ ptr = output_buffer;
+ ptr = mem2hex(&regs->d0, ptr, 4, 0);
+ ptr = mem2hex(&regs->d1, ptr, 4, 0);
+ ptr = mem2hex(&regs->d2, ptr, 4, 0);
+ ptr = mem2hex(&regs->d3, ptr, 4, 0);
+ ptr = mem2hex(&regs->a0, ptr, 4, 0);
+ ptr = mem2hex(&regs->a1, ptr, 4, 0);
+ ptr = mem2hex(&regs->a2, ptr, 4, 0);
+ ptr = mem2hex(&regs->a3, ptr, 4, 0);
+
+ ptr = mem2hex(&ssp, ptr, 4, 0); /* 8 */
+ ptr = mem2hex(&regs->pc, ptr, 4, 0);
+ ptr = mem2hex(&regs->mdr, ptr, 4, 0);
+ ptr = mem2hex(&regs->epsw, ptr, 4, 0);
+ ptr = mem2hex(&regs->lir, ptr, 4, 0);
+ ptr = mem2hex(&regs->lar, ptr, 4, 0);
+ ptr = mem2hex(&regs->mdrq, ptr, 4, 0);
+
+ ptr = mem2hex(&regs->e0, ptr, 4, 0); /* 15 */
+ ptr = mem2hex(&regs->e1, ptr, 4, 0);
+ ptr = mem2hex(&regs->e2, ptr, 4, 0);
+ ptr = mem2hex(&regs->e3, ptr, 4, 0);
+ ptr = mem2hex(&regs->e4, ptr, 4, 0);
+ ptr = mem2hex(&regs->e5, ptr, 4, 0);
+ ptr = mem2hex(&regs->e6, ptr, 4, 0);
+ ptr = mem2hex(&regs->e7, ptr, 4, 0);
+
+ ptr = mem2hex(&ssp, ptr, 4, 0);
+ ptr = mem2hex(&regs, ptr, 4, 0);
+ ptr = mem2hex(&regs->sp, ptr, 4, 0);
+ ptr = mem2hex(&regs->mcrh, ptr, 4, 0); /* 26 */
+ ptr = mem2hex(&regs->mcrl, ptr, 4, 0);
+ ptr = mem2hex(&regs->mcvf, ptr, 4, 0);
+
+ ptr = mem2hex(&gdbstub_fpcr, ptr, 4, 0); /* 29 - FPCR */
+ ptr = mem2hex(&zero, ptr, 4, 0);
+ ptr = mem2hex(&zero, ptr, 4, 0);
+ for (loop = 0; loop < 32; loop++)
+ ptr = mem2hex(&gdbstub_fpufs_array[loop],
+ ptr, 4, 0); /* 32 - FS0-31 */
+
+ break;
+
+ /*
+ * set the value of the CPU registers - return OK
+ */
+ case 'G':
+ {
+ const char *ptr;
+
+ ptr = &input_buffer[1];
+ ptr = hex2mem(ptr, &regs->d0, 4, 0);
+ ptr = hex2mem(ptr, &regs->d1, 4, 0);
+ ptr = hex2mem(ptr, &regs->d2, 4, 0);
+ ptr = hex2mem(ptr, &regs->d3, 4, 0);
+ ptr = hex2mem(ptr, &regs->a0, 4, 0);
+ ptr = hex2mem(ptr, &regs->a1, 4, 0);
+ ptr = hex2mem(ptr, &regs->a2, 4, 0);
+ ptr = hex2mem(ptr, &regs->a3, 4, 0);
+
+ ptr = hex2mem(ptr, &ssp, 4, 0); /* 8 */
+ ptr = hex2mem(ptr, &regs->pc, 4, 0);
+ ptr = hex2mem(ptr, &regs->mdr, 4, 0);
+ ptr = hex2mem(ptr, &regs->epsw, 4, 0);
+ ptr = hex2mem(ptr, &regs->lir, 4, 0);
+ ptr = hex2mem(ptr, &regs->lar, 4, 0);
+ ptr = hex2mem(ptr, &regs->mdrq, 4, 0);
+
+ ptr = hex2mem(ptr, &regs->e0, 4, 0); /* 15 */
+ ptr = hex2mem(ptr, &regs->e1, 4, 0);
+ ptr = hex2mem(ptr, &regs->e2, 4, 0);
+ ptr = hex2mem(ptr, &regs->e3, 4, 0);
+ ptr = hex2mem(ptr, &regs->e4, 4, 0);
+ ptr = hex2mem(ptr, &regs->e5, 4, 0);
+ ptr = hex2mem(ptr, &regs->e6, 4, 0);
+ ptr = hex2mem(ptr, &regs->e7, 4, 0);
+
+ ptr = hex2mem(ptr, &ssp, 4, 0);
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ ptr = hex2mem(ptr, &regs->sp, 4, 0);
+ ptr = hex2mem(ptr, &regs->mcrh, 4, 0); /* 26 */
+ ptr = hex2mem(ptr, &regs->mcrl, 4, 0);
+ ptr = hex2mem(ptr, &regs->mcvf, 4, 0);
+
+ ptr = hex2mem(ptr, &zero, 4, 0); /* 29 - FPCR */
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ for (loop = 0; loop < 32; loop++) /* 32 - FS0-31 */
+ ptr = hex2mem(ptr, &zero, 4, 0);
+
+#if 0
+ /*
+ * See if the stack pointer has moved. If so, then copy
+ * the saved locals and ins to the new location.
+ */
+ unsigned long *newsp = (unsigned long *) registers[SP];
+ if (sp != newsp)
+ sp = memcpy(newsp, sp, 16 * 4);
+#endif
+
+ gdbstub_strcpy(output_buffer, "OK");
+ }
+ break;
+
+ /*
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA
+ */
+ case 'm':
+ ptr = &input_buffer[1];
+
+ if (hexToInt(&ptr, &addr) &&
+ *ptr++ == ',' &&
+ hexToInt(&ptr, &length)
+ ) {
+ if (mem2hex((char *) addr, output_buffer,
+ length, 1))
+ break;
+ gdbstub_strcpy(output_buffer, "E03");
+ } else {
+ gdbstub_strcpy(output_buffer, "E01");
+ }
+ break;
+
+ /*
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA
+ * return OK
+ */
+ case 'M':
+ ptr = &input_buffer[1];
+
+ if (hexToInt(&ptr, &addr) &&
+ *ptr++ == ',' &&
+ hexToInt(&ptr, &length) &&
+ *ptr++ == ':'
+ ) {
+ if (hex2mem(ptr, (char *) addr, length, 1))
+ gdbstub_strcpy(output_buffer, "OK");
+ else
+ gdbstub_strcpy(output_buffer, "E03");
+
+ gdbstub_flush_caches = 1;
+ } else {
+ gdbstub_strcpy(output_buffer, "E02");
+ }
+ break;
+
+ /*
+ * cAA..AA Continue at address AA..AA(optional)
+ */
+ case 'c':
+ /* try to read optional parameter, pc unchanged if no
+ * parm */
+
+ ptr = &input_buffer[1];
+ if (hexToInt(&ptr, &addr))
+ regs->pc = addr;
+ goto done;
+
+ /*
+ * kill the program
+ */
+ case 'k' :
+ goto done; /* just continue */
+
+ /*
+ * Reset the whole machine (FIXME: system dependent)
+ */
+ case 'r':
+ break;
+
+ /*
+ * Step to next instruction
+ */
+ case 's':
+ /*
+ * using the T flag doesn't seem to perform single
+ * stepping (it seems to wind up being caught by the
+ * JTAG unit), so we have to use breakpoints and
+ * continue instead.
+ */
+ if (gdbstub_single_step(regs) < 0)
+ /* ignore any fault error for now */
+ gdbstub_printk("unable to set single-step"
+ " bp\n");
+ goto done;
+
+ /*
+ * Set baud rate (bBB)
+ */
+ case 'b':
+ do {
+ int baudrate;
+
+ ptr = &input_buffer[1];
+ if (!hexToInt(&ptr, &baudrate)) {
+ gdbstub_strcpy(output_buffer, "B01");
+ break;
+ }
+
+ if (baudrate) {
+ /* ACK before changing speed */
+ putpacket("OK");
+ gdbstub_io_set_baud(baudrate);
+ }
+ } while (0);
+ break;
+
+ /*
+ * Set breakpoint
+ */
+ case 'Z':
+ ptr = &input_buffer[1];
+
+ if (!hexToInt(&ptr, &loop) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &addr) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &length)
+ ) {
+ gdbstub_strcpy(output_buffer, "E01");
+ break;
+ }
+
+ /* only support software breakpoints */
+ gdbstub_strcpy(output_buffer, "E03");
+ if (loop != 0 ||
+ length < 1 ||
+ length > 7 ||
+ (unsigned long) addr < 4096)
+ break;
+
+ if (gdbstub_set_breakpoint((u8 *) addr, length) < 0)
+ break;
+
+ gdbstub_strcpy(output_buffer, "OK");
+ break;
+
+ /*
+ * Clear breakpoint
+ */
+ case 'z':
+ ptr = &input_buffer[1];
+
+ if (!hexToInt(&ptr, &loop) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &addr) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &length)
+ ) {
+ gdbstub_strcpy(output_buffer, "E01");
+ break;
+ }
+
+ /* only support software breakpoints */
+ gdbstub_strcpy(output_buffer, "E03");
+ if (loop != 0 ||
+ length < 1 ||
+ length > 7 ||
+ (unsigned long) addr < 4096)
+ break;
+
+ if (gdbstub_clear_breakpoint((u8 *) addr, length) < 0)
+ break;
+
+ gdbstub_strcpy(output_buffer, "OK");
+ break;
+
+ default:
+ gdbstub_proto("### GDB Unsupported Cmd '%s'\n",
+ input_buffer);
+ break;
+ }
+
+ /* reply to the request */
+ putpacket(output_buffer);
+ }
+
+done:
+ /*
+ * Need to flush the instruction cache here, as we may
+ * have deposited a breakpoint, and the icache probably
+ * has no way of knowing that a data ref to some location
+ * may have changed something that is in the instruction
+ * cache.
+ * NB: We flush both caches, just to be sure...
+ */
+ if (gdbstub_flush_caches)
+ gdbstub_purge_cache();
+
+ gdbstub_load_fpu();
+ mn10300_set_gdbleds(0);
+ if (excep == EXCEP_NMI)
+ NMICR = NMICR_NMIF;
+
+ touch_softlockup_watchdog();
+
+ local_irq_restore(epsw);
+ return 1;
+}
+
+/*
+ * handle event interception
+ */
+asmlinkage int gdbstub_intercept(struct pt_regs *regs,
+ enum exception_code excep)
+{
+ static u8 notfirst = 1;
+ int ret;
+
+ if (gdbstub_busy)
+ gdbstub_printk("--> gdbstub reentered itself\n");
+ gdbstub_busy = 1;
+
+ if (notfirst) {
+ unsigned long mdr;
+ asm("mov mdr,%0" : "=d"(mdr));
+
+ gdbstub_entry(
+ "--> gdbstub_intercept(%p,%04x) [MDR=%lx PC=%lx]\n",
+ regs, excep, mdr, regs->pc);
+
+ gdbstub_entry(
+ "PC: %08lx EPSW: %08lx SSP: %08lx mode: %s\n",
+ regs->pc, regs->epsw, (unsigned long) &ret,
+ user_mode(regs) ? "User" : "Super");
+ gdbstub_entry(
+ "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
+ regs->d0, regs->d1, regs->d2, regs->d3);
+ gdbstub_entry(
+ "a0: %08lx a1: %08lx a2: %08lx a3: %08lx\n",
+ regs->a0, regs->a1, regs->a2, regs->a3);
+ gdbstub_entry(
+ "e0: %08lx e1: %08lx e2: %08lx e3: %08lx\n",
+ regs->e0, regs->e1, regs->e2, regs->e3);
+ gdbstub_entry(
+ "e4: %08lx e5: %08lx e6: %08lx e7: %08lx\n",
+ regs->e4, regs->e5, regs->e6, regs->e7);
+ gdbstub_entry(
+ "lar: %08lx lir: %08lx mdr: %08lx usp: %08lx\n",
+ regs->lar, regs->lir, regs->mdr, regs->sp);
+ gdbstub_entry(
+ "cvf: %08lx crl: %08lx crh: %08lx drq: %08lx\n",
+ regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq);
+ gdbstub_entry(
+ "threadinfo=%p task=%p)\n",
+ current_thread_info(), current);
+ } else {
+ notfirst = 1;
+ }
+
+ ret = gdbstub(regs, excep);
+
+ gdbstub_entry("<-- gdbstub_intercept()\n");
+ gdbstub_busy = 0;
+ return ret;
+}
+
+/*
+ * handle the GDB stub itself causing an exception
+ */
+asmlinkage void gdbstub_exception(struct pt_regs *regs,
+ enum exception_code excep)
+{
+ unsigned long mdr;
+
+ asm("mov mdr,%0" : "=d"(mdr));
+ gdbstub_entry("--> gdbstub exception({%p},%04x) [MDR=%lx]\n",
+ regs, excep, mdr);
+
+ while ((unsigned long) regs == 0xffffffff) {}
+
+ /* handle guarded memory accesses where we know it might fault */
+ if (regs->pc == (unsigned) gdbstub_read_byte_guard) {
+ regs->pc = (unsigned) gdbstub_read_byte_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_read_word_guard) {
+ regs->pc = (unsigned) gdbstub_read_word_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_read_dword_guard) {
+ regs->pc = (unsigned) gdbstub_read_dword_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_byte_guard) {
+ regs->pc = (unsigned) gdbstub_write_byte_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_word_guard) {
+ regs->pc = (unsigned) gdbstub_write_word_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_dword_guard) {
+ regs->pc = (unsigned) gdbstub_write_dword_cont;
+ goto fault;
+ }
+
+ gdbstub_printk("\n### GDB stub caused an exception ###\n");
+
+ /* something went horribly wrong */
+ console_verbose();
+ show_registers(regs);
+
+ panic("GDB Stub caused an unexpected exception - can't continue\n");
+
+ /* we caught an attempt by the stub to access silly memory */
+fault:
+ gdbstub_entry("<-- gdbstub exception() = EFAULT\n");
+ regs->d0 = -EFAULT;
+ return;
+}
+
+/*
+ * send an exit message to GDB
+ */
+void gdbstub_exit(int status)
+{
+ unsigned char checksum;
+ unsigned char ch;
+ int count;
+
+ gdbstub_busy = 1;
+ output_buffer[0] = 'W';
+ output_buffer[1] = hexchars[(status >> 4) & 0x0F];
+ output_buffer[2] = hexchars[status & 0x0F];
+ output_buffer[3] = 0;
+
+ gdbstub_io_tx_char('$');
+ checksum = 0;
+ count = 0;
+
+ while ((ch = output_buffer[count]) != 0) {
+ gdbstub_io_tx_char(ch);
+ checksum += ch;
+ count += 1;
+ }
+
+ gdbstub_io_tx_char('#');
+ gdbstub_io_tx_char(hexchars[checksum >> 4]);
+ gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+
+ /* make sure the output is flushed, or else RedBoot might clobber it */
+ gdbstub_io_tx_flush();
+
+ gdbstub_busy = 0;
+}
+
+/*
+ * initialise the GDB stub
+ */
+asmlinkage void __init gdbstub_init(void)
+{
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ unsigned char ch;
+ int ret;
+#endif
+
+ gdbstub_busy = 1;
+
+ printk(KERN_INFO "%s", gdbstub_banner);
+
+ gdbstub_io_init();
+
+ gdbstub_entry("--> gdbstub_init\n");
+
+ /* try to talk to GDB (or anyone insane enough to want to type GDB
+ * protocol by hand) */
+ gdbstub_io("### GDB Tx ACK\n");
+ gdbstub_io_tx_char('+'); /* 'hello world' */
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ gdbstub_printk("GDB Stub waiting for packet\n");
+
+ /* in case GDB is started before us, ACK any packets that are already
+ * sitting there (presumably "$?#xx")
+ */
+ do { gdbstub_io_rx_char(&ch, 0); } while (ch != '$');
+ do { gdbstub_io_rx_char(&ch, 0); } while (ch != '#');
+ /* eat first csum byte */
+ do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0);
+ /* eat second csum byte */
+ do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0);
+
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-'); /* NAK it */
+
+#else
+ printk("GDB Stub ready\n");
+#endif
+
+ gdbstub_busy = 0;
+ gdbstub_entry("<-- gdbstub_init\n");
+}
+
+/*
+ * register the console at a more appropriate time
+ */
+#ifdef CONFIG_GDBSTUB_CONSOLE
+static int __init gdbstub_postinit(void)
+{
+ printk(KERN_NOTICE "registering console\n");
+ register_console(&gdbstub_console);
+ return 0;
+}
+
+__initcall(gdbstub_postinit);
+#endif
+
+/*
+ * handle character reception on GDB serial port
+ * - jump into the GDB stub if BREAK is detected on the serial line
+ */
+asmlinkage void gdbstub_rx_irq(struct pt_regs *regs, enum exception_code excep)
+{
+ char ch;
+ int ret;
+
+ gdbstub_entry("--> gdbstub_rx_irq\n");
+
+ do {
+ ret = gdbstub_io_rx_char(&ch, 1);
+ if (ret != -EIO && ret != -EAGAIN) {
+ if (ret != -EINTR)
+ gdbstub_rx_unget = ch;
+ gdbstub(regs, excep);
+ }
+ } while (ret != -EAGAIN);
+
+ gdbstub_entry("<-- gdbstub_rx_irq\n");
+}
diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S
new file mode 100644
index 000000000000..606bd8c6758d
--- /dev/null
+++ b/arch/mn10300/kernel/head.S
@@ -0,0 +1,255 @@
+/* Boot entry point for MN10300 kernel
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <linux/serial_reg.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/frame.inc>
+#include <asm/param.h>
+#include <asm/unit/serial.h>
+
+ .section .text.head,"ax"
+
+###############################################################################
+#
+# bootloader entry point
+#
+###############################################################################
+ .globl _start
+ .type _start,@function
+_start:
+ # save commandline pointer
+ mov d0,a3
+
+ # preload the PGD pointer register
+ mov swapper_pg_dir,d0
+ mov d0,(PTBR)
+
+ # turn on the TLBs
+ mov MMUCTR_IIV|MMUCTR_DIV,d0
+ mov d0,(MMUCTR)
+ mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0
+ mov d0,(MMUCTR)
+
+ # turn on AM33v2 exception handling mode and set the trap table base
+ movhu (CPUP),d0
+ or CPUP_EXM_AM33V2,d0
+ movhu d0,(CPUP)
+ mov CONFIG_INTERRUPT_VECTOR_BASE,d0
+ mov d0,(TBR)
+
+ # invalidate and enable both of the caches
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0) # turn off first
+ mov CHCTR_ICINV|CHCTR_DCINV,d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_CACHE_WBACK
+#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
+#else
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0
+#endif /* CACHE_DISABLED */
+#else
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
+#endif /* WBACK */
+ movhu d0,(a0) # enable
+#endif /* NOWRALLOC */
+
+ # turn on RTS on the debug serial port if applicable
+#ifdef CONFIG_MN10300_UNIT_ASB2305
+ bset UART_MCR_RTS,(ASB2305_DEBUG_MCR)
+#endif
+
+ # clear the BSS area
+ mov __bss_start,a0
+ mov __bss_stop,a1
+ clr d0
+bssclear:
+ cmp a1,a0
+ bge bssclear_end
+ mov d0,(a0)
+ inc4 a0
+ bra bssclear
+bssclear_end:
+
+ # retrieve the parameters (including command line) before we overwrite
+ # them
+ cmp 0xabadcafe,d1
+ bne __no_parameters
+
+__copy_parameters:
+ mov redboot_command_line,a0
+ mov a0,a1
+ add COMMAND_LINE_SIZE,a1
+1:
+ movbu (a3),d0
+ inc a3
+ movbu d0,(a0)
+ inc a0
+ cmp a1,a0
+ blt 1b
+
+ mov redboot_platform_name,a0
+ mov a0,a1
+ add COMMAND_LINE_SIZE,a1
+ mov d2,a3
+1:
+ movbu (a3),d0
+ inc a3
+ movbu d0,(a0)
+ inc a0
+ cmp a1,a0
+ blt 1b
+
+__no_parameters:
+
+ # set up the registers with recognisable rubbish in them
+ mov init_thread_union+THREAD_SIZE-12,sp
+
+ mov 0xea01eaea,d0
+ mov d0,(4,sp) # EPSW save area
+ mov 0xea02eaea,d0
+ mov d0,(8,sp) # PC save area
+
+ mov 0xeb0060ed,d0
+ mov d0,mdr
+ mov 0xeb0061ed,d0
+ mov d0,mdrq
+ mov 0xeb0062ed,d0
+ mov d0,mcrh
+ mov 0xeb0063ed,d0
+ mov d0,mcrl
+ mov 0xeb0064ed,d0
+ mov d0,mcvf
+ mov 0xed0065ed,a3
+ mov a3,usp
+
+ mov 0xed00e0ed,e0
+ mov 0xed00e1ed,e1
+ mov 0xed00e2ed,e2
+ mov 0xed00e3ed,e3
+ mov 0xed00e4ed,e4
+ mov 0xed00e5ed,e5
+ mov 0xed00e6ed,e6
+ mov 0xed00e7ed,e7
+
+ mov 0xed00d0ed,d0
+ mov 0xed00d1ed,d1
+ mov 0xed00d2ed,d2
+ mov 0xed00d3ed,d3
+ mov 0xed00a0ed,a0
+ mov 0xed00a1ed,a1
+ mov 0xed00a2ed,a2
+ mov 0,a3
+
+ # set up the initial kernel stack
+ SAVE_ALL
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ # put different recognisable rubbish in the regs
+ mov 0xfb0060ed,d0
+ mov d0,mdr
+ mov 0xfb0061ed,d0
+ mov d0,mdrq
+ mov 0xfb0062ed,d0
+ mov d0,mcrh
+ mov 0xfb0063ed,d0
+ mov d0,mcrl
+ mov 0xfb0064ed,d0
+ mov d0,mcvf
+ mov 0xfd0065ed,a0
+ mov a0,usp
+
+ mov 0xfd00e0ed,e0
+ mov 0xfd00e1ed,e1
+ mov 0xfd00e2ed,e2
+ mov 0xfd00e3ed,e3
+ mov 0xfd00e4ed,e4
+ mov 0xfd00e5ed,e5
+ mov 0xfd00e6ed,e6
+ mov 0xfd00e7ed,e7
+
+ mov 0xfd00d0ed,d0
+ mov 0xfd00d1ed,d1
+ mov 0xfd00d2ed,d2
+ mov 0xfd00d3ed,d3
+ mov 0xfd00a0ed,a0
+ mov 0xfd00a1ed,a1
+ mov 0xfd00a2ed,a2
+
+ # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov init_task,e2
+#endif
+
+ # initialise the processor and the unit
+ call processor_init[],0
+ call unit_init[],0
+
+#ifdef CONFIG_GDBSTUB
+ call gdbstub_init[],0
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ .globl __gdbstub_pause
+__gdbstub_pause:
+ bra __gdbstub_pause
+#endif
+#endif
+
+ jmp start_kernel
+ .size _start, _start-.
+ENTRY(__head_end)
+
+/*
+ * This is initialized to disallow all access to the low 2G region
+ * - the high 2G region is managed directly by the MMU
+ * - range 0x70000000-0x7C000000 are initialised for use by VMALLOC
+ */
+ .section .bss
+ .balign PAGE_SIZE
+ENTRY(swapper_pg_dir)
+ .space PTRS_PER_PGD*4
+
+/*
+ * The page tables are initialized to only 8MB here - the final page
+ * tables are set up later depending on memory size.
+ */
+
+ .balign PAGE_SIZE
+ENTRY(empty_zero_page)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(empty_bad_page)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(empty_bad_pte_table)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(large_page_table)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(kernel_vmalloc_ptes)
+ .space ((VMALLOC_END-VMALLOC_START)/PAGE_SIZE)*4
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
new file mode 100644
index 000000000000..39fe6882dd1d
--- /dev/null
+++ b/arch/mn10300/kernel/init_task.c
@@ -0,0 +1,45 @@
+/* MN10300 Initial task definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+ { INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h
new file mode 100644
index 000000000000..eee2eee86267
--- /dev/null
+++ b/arch/mn10300/kernel/internal.h
@@ -0,0 +1,20 @@
+/* Internal definitions for the arch part of the core kernel
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * kthread.S
+ */
+extern int kernel_thread_helper(int);
+
+/*
+ * entry.S
+ */
+extern void ret_from_fork(struct task_struct *) __attribute__((noreturn));
diff --git a/arch/mn10300/kernel/io.c b/arch/mn10300/kernel/io.c
new file mode 100644
index 000000000000..e96fdf6bb542
--- /dev/null
+++ b/arch/mn10300/kernel/io.c
@@ -0,0 +1,30 @@
+/* MN10300 Misaligned multibyte-word I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+/*
+ * output data from a potentially misaligned buffer
+ */
+void __outsl(unsigned long addr, const void *buffer, int count)
+{
+ const unsigned char *buf = buffer;
+ unsigned long val;
+
+ while (count--) {
+ memcpy(&val, buf, 4);
+ outl(val, addr);
+ buf += 4;
+ }
+}
+EXPORT_SYMBOL(__outsl);
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
new file mode 100644
index 000000000000..761c434a2488
--- /dev/null
+++ b/arch/mn10300/kernel/irq.c
@@ -0,0 +1,235 @@
+/* MN10300 Arch-specific interrupt handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <asm/setup.h>
+
+unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7;
+EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
+
+atomic_t irq_err_count;
+
+/*
+ * MN10300 INTC controller operations
+ */
+static void mn10300_cpupic_disable(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_enable(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_ack(unsigned int irq)
+{
+ u16 tmp;
+ *(volatile u8 *) &GxICR(irq) = GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_mask(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL);
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_mask_ack(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_unmask(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_end(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+ tmp = GxICR(irq);
+}
+
+static struct irq_chip mn10300_cpu_pic = {
+ .name = "cpu",
+ .disable = mn10300_cpupic_disable,
+ .enable = mn10300_cpupic_enable,
+ .ack = mn10300_cpupic_ack,
+ .mask = mn10300_cpupic_mask,
+ .mask_ack = mn10300_cpupic_mask_ack,
+ .unmask = mn10300_cpupic_unmask,
+ .end = mn10300_cpupic_end,
+};
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(int irq)
+{
+ printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+/*
+ * change the level at which an IRQ executes
+ * - must not be called whilst interrupts are being processed!
+ */
+void set_intr_level(int irq, u16 level)
+{
+ u16 tmp;
+
+ if (in_interrupt())
+ BUG();
+
+ tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_ENABLE) | level;
+ tmp = GxICR(irq);
+}
+
+/*
+ * mark an interrupt to be ACK'd after interrupt handlers have been run rather
+ * than before
+ * - see Documentation/mn10300/features.txt
+ */
+void set_intr_postackable(int irq)
+{
+ set_irq_handler(irq, handle_level_irq);
+}
+
+/*
+ * initialise the interrupt system
+ */
+void __init init_IRQ(void)
+{
+ int irq;
+
+ for (irq = 0; irq < NR_IRQS; irq++)
+ if (irq_desc[irq].chip == &no_irq_type)
+ set_irq_chip_and_handler(irq, &mn10300_cpu_pic,
+ handle_edge_irq);
+ unit_init_IRQ();
+}
+
+/*
+ * handle normal device IRQs
+ */
+asmlinkage void do_IRQ(void)
+{
+ unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw;
+ int irq;
+
+ sp = current_stack_pointer();
+ if (sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN)
+ BUG();
+
+ /* make sure local_irq_enable() doesn't muck up the interrupt priority
+ * setting in EPSW */
+ old_irq_enabled_epsw = __mn10300_irq_enabled_epsw;
+ local_save_flags(epsw);
+ __mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw);
+ irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL;
+
+ __IRQ_STAT(smp_processor_id(), __irq_count)++;
+
+ irq_enter();
+
+ for (;;) {
+ /* ask the interrupt controller for the next IRQ to process
+ * - the result we get depends on EPSW.IM
+ */
+ irq = IAGR & IAGR_GN;
+ if (!irq)
+ break;
+
+ local_irq_restore(irq_disabled_epsw);
+
+ generic_handle_irq(irq >> 2);
+
+ /* restore IRQ controls for IAGR access */
+ local_irq_restore(epsw);
+ }
+
+ __mn10300_irq_enabled_epsw = old_irq_enabled_epsw;
+
+ irq_exit();
+}
+
+/*
+ * Display interrupt management information through /proc/interrupts
+ */
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j, cpu;
+ struct irqaction *action;
+ unsigned long flags;
+
+ switch (i) {
+ /* display column title bar naming CPUs */
+ case 0:
+ seq_printf(p, " ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "CPU%d ", j);
+ seq_putc(p, '\n');
+ break;
+
+ /* display information rows, one per active CPU */
+ case 1 ... NR_IRQS - 1:
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+
+ action = irq_desc[i].action;
+ if (action) {
+ seq_printf(p, "%3d: ", i);
+ for_each_present_cpu(cpu)
+ seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+ seq_printf(p, " %14s.%u", irq_desc[i].chip->name,
+ (GxICR(i) & GxICR_LEVEL) >>
+ GxICR_LEVEL_SHIFT);
+ seq_printf(p, " %s", action->name);
+
+ for (action = action->next;
+ action;
+ action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+ }
+
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ break;
+
+ /* polish off with NMI and error counters */
+ case NR_IRQS:
+ seq_printf(p, "NMI: ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "%10u ", nmi_count(j));
+ seq_putc(p, '\n');
+
+ seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+ break;
+ }
+
+ return 0;
+}
diff --git a/arch/mn10300/kernel/kernel_execve.S b/arch/mn10300/kernel/kernel_execve.S
new file mode 100644
index 000000000000..86039f105268
--- /dev/null
+++ b/arch/mn10300/kernel/kernel_execve.S
@@ -0,0 +1,37 @@
+/* MN10300 In-kernel program execution
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+###############################################################################
+#
+# Do a system call from kernel instead of calling sys_execve so we end up with
+# proper pt_regs.
+#
+# int kernel_execve(const char *filename, char *const argv[],
+# char *const envp[])
+#
+# On entry: D0/D1/8(SP): arguments to function
+# On return: D0: syscall return.
+#
+###############################################################################
+ .globl kernel_execve
+ .type kernel_execve,@function
+kernel_execve:
+ mov a3,a1
+ mov d0,a0
+ mov (12,sp),a3
+ mov +__NR_execve,d0
+ syscall 0
+ mov a1,a3
+ rets
+
+ .size kernel_execve,.-kernel_execve
diff --git a/arch/mn10300/kernel/kprobes.c b/arch/mn10300/kernel/kprobes.c
new file mode 100644
index 000000000000..dacafab00eb2
--- /dev/null
+++ b/arch/mn10300/kernel/kprobes.c
@@ -0,0 +1,653 @@
+/* MN10300 Kernel probes implementation
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/spinlock.h>
+#include <linux/preempt.h>
+#include <linux/kdebug.h>
+#include <asm/cacheflush.h>
+
+struct kretprobe_blackpoint kretprobe_blacklist[] = { { NULL, NULL } };
+const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
+
+/* kprobe_status settings */
+#define KPROBE_HIT_ACTIVE 0x00000001
+#define KPROBE_HIT_SS 0x00000002
+
+static struct kprobe *current_kprobe;
+static unsigned long current_kprobe_orig_pc;
+static unsigned long current_kprobe_next_pc;
+static int current_kprobe_ss_flags;
+static unsigned long kprobe_status;
+static kprobe_opcode_t current_kprobe_ss_buf[MAX_INSN_SIZE + 2];
+static unsigned long current_kprobe_bp_addr;
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+
+
+/* singlestep flag bits */
+#define SINGLESTEP_BRANCH 1
+#define SINGLESTEP_PCREL 2
+
+#define READ_BYTE(p, valp) \
+ do { *(u8 *)(valp) = *(u8 *)(p); } while (0)
+
+#define READ_WORD16(p, valp) \
+ do { \
+ READ_BYTE((p), (valp)); \
+ READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1); \
+ } while (0)
+
+#define READ_WORD32(p, valp) \
+ do { \
+ READ_BYTE((p), (valp)); \
+ READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1); \
+ READ_BYTE((u8 *)(p) + 2, (u8 *)(valp) + 2); \
+ READ_BYTE((u8 *)(p) + 3, (u8 *)(valp) + 3); \
+ } while (0)
+
+
+static const u8 mn10300_insn_sizes[256] =
+{
+ /* 1 2 3 4 5 6 7 8 9 a b c d e f */
+ 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+ 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+ 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+ 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */
+};
+
+#define LT (1 << 0)
+#define GT (1 << 1)
+#define GE (1 << 2)
+#define LE (1 << 3)
+#define CS (1 << 4)
+#define HI (1 << 5)
+#define CC (1 << 6)
+#define LS (1 << 7)
+#define EQ (1 << 8)
+#define NE (1 << 9)
+#define RA (1 << 10)
+#define VC (1 << 11)
+#define VS (1 << 12)
+#define NC (1 << 13)
+#define NS (1 << 14)
+
+static const u16 cond_table[] = {
+ /* V C N Z */
+ /* 0 0 0 0 */ (NE | NC | CC | VC | GE | GT | HI),
+ /* 0 0 0 1 */ (EQ | NC | CC | VC | GE | LE | LS),
+ /* 0 0 1 0 */ (NE | NS | CC | VC | LT | LE | HI),
+ /* 0 0 1 1 */ (EQ | NS | CC | VC | LT | LE | LS),
+ /* 0 1 0 0 */ (NE | NC | CS | VC | GE | GT | LS),
+ /* 0 1 0 1 */ (EQ | NC | CS | VC | GE | LE | LS),
+ /* 0 1 1 0 */ (NE | NS | CS | VC | LT | LE | LS),
+ /* 0 1 1 1 */ (EQ | NS | CS | VC | LT | LE | LS),
+ /* 1 0 0 0 */ (NE | NC | CC | VS | LT | LE | HI),
+ /* 1 0 0 1 */ (EQ | NC | CC | VS | LT | LE | LS),
+ /* 1 0 1 0 */ (NE | NS | CC | VS | GE | GT | HI),
+ /* 1 0 1 1 */ (EQ | NS | CC | VS | GE | LE | LS),
+ /* 1 1 0 0 */ (NE | NC | CS | VS | LT | LE | LS),
+ /* 1 1 0 1 */ (EQ | NC | CS | VS | LT | LE | LS),
+ /* 1 1 1 0 */ (NE | NS | CS | VS | GE | GT | LS),
+ /* 1 1 1 1 */ (EQ | NS | CS | VS | GE | LE | LS),
+};
+
+/*
+ * Calculate what the PC will be after executing next instruction
+ */
+static unsigned find_nextpc(struct pt_regs *regs, int *flags)
+{
+ unsigned size;
+ s8 x8;
+ s16 x16;
+ s32 x32;
+ u8 opc, *pc, *sp, *next;
+
+ next = 0;
+ *flags = SINGLESTEP_PCREL;
+
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+ opc = *pc;
+
+ size = mn10300_insn_sizes[opc];
+ if (size > 0) {
+ next = pc + size;
+ } else {
+ switch (opc) {
+ /* Bxx (d8,PC) */
+ case 0xc0 ... 0xca:
+ x8 = 2;
+ if (cond_table[regs->epsw & 0xf] & (1 << (opc & 0xf)))
+ x8 = (s8)pc[1];
+ next = pc + x8;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* JMP (d16,PC) or CALL (d16,PC) */
+ case 0xcc:
+ case 0xcd:
+ READ_WORD16(pc + 1, &x16);
+ next = pc + x16;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* JMP (d32,PC) or CALL (d32,PC) */
+ case 0xdc:
+ case 0xdd:
+ READ_WORD32(pc + 1, &x32);
+ next = pc + x32;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* RETF */
+ case 0xde:
+ next = (u8 *)regs->mdr;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* RET */
+ case 0xdf:
+ sp += pc[2];
+ READ_WORD32(sp, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ case 0xf0:
+ next = pc + 2;
+ opc = pc[1];
+ if (opc >= 0xf0 && opc <= 0xf7) {
+ /* JMP (An) / CALLS (An) */
+ switch (opc & 3) {
+ case 0:
+ next = (u8 *)regs->a0;
+ break;
+ case 1:
+ next = (u8 *)regs->a1;
+ break;
+ case 2:
+ next = (u8 *)regs->a2;
+ break;
+ case 3:
+ next = (u8 *)regs->a3;
+ break;
+ }
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ } else if (opc == 0xfc) {
+ /* RETS */
+ READ_WORD32(sp, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ } else if (opc == 0xfd) {
+ /* RTI */
+ READ_WORD32(sp + 4, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ }
+ break;
+
+ /* potential 3-byte conditional branches */
+ case 0xf8:
+ next = pc + 3;
+ opc = pc[1];
+ if (opc >= 0xe8 && opc <= 0xeb &&
+ (cond_table[regs->epsw & 0xf] &
+ (1 << ((opc & 0xf) + 3)))
+ ) {
+ READ_BYTE(pc+2, &x8);
+ next = pc + x8;
+ *flags |= SINGLESTEP_BRANCH;
+ }
+ break;
+
+ case 0xfa:
+ if (pc[1] == 0xff) {
+ /* CALLS (d16,PC) */
+ READ_WORD16(pc + 2, &x16);
+ next = pc + x16;
+ } else
+ next = pc + 4;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ case 0xfc:
+ x32 = 6;
+ if (pc[1] == 0xff) {
+ /* CALLS (d32,PC) */
+ READ_WORD32(pc + 2, &x32);
+ }
+ next = pc + x32;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+ /* LXX (d8,PC) */
+ /* SETLB - loads the next four bytes into the LIR reg */
+ case 0xd0 ... 0xda:
+ case 0xdb:
+ panic("Can't singlestep Lxx/SETLB\n");
+ break;
+ }
+ }
+ return (unsigned)next;
+
+}
+
+/*
+ * set up out of place singlestep of some branching instructions
+ */
+static unsigned __kprobes singlestep_branch_setup(struct pt_regs *regs)
+{
+ u8 opc, *pc, *sp, *next;
+
+ next = NULL;
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+
+ switch (pc[0]) {
+ case 0xc0 ... 0xca: /* Bxx (d8,PC) */
+ case 0xcc: /* JMP (d16,PC) */
+ case 0xdc: /* JMP (d32,PC) */
+ case 0xf8: /* Bxx (d8,PC) 3-byte version */
+ /* don't really need to do anything except cause trap */
+ next = pc;
+ break;
+
+ case 0xcd: /* CALL (d16,PC) */
+ pc[1] = 5;
+ pc[2] = 0;
+ next = pc + 5;
+ break;
+
+ case 0xdd: /* CALL (d32,PC) */
+ pc[1] = 7;
+ pc[2] = 0;
+ pc[3] = 0;
+ pc[4] = 0;
+ next = pc + 7;
+ break;
+
+ case 0xde: /* RETF */
+ next = pc + 3;
+ regs->mdr = (unsigned) next;
+ break;
+
+ case 0xdf: /* RET */
+ sp += pc[2];
+ next = pc + 3;
+ *(unsigned *)sp = (unsigned) next;
+ break;
+
+ case 0xf0:
+ next = pc + 2;
+ opc = pc[1];
+ if (opc >= 0xf0 && opc <= 0xf3) {
+ /* CALLS (An) */
+ /* use CALLS (d16,PC) to avoid mucking with An */
+ pc[0] = 0xfa;
+ pc[1] = 0xff;
+ pc[2] = 4;
+ pc[3] = 0;
+ next = pc + 4;
+ } else if (opc >= 0xf4 && opc <= 0xf7) {
+ /* JMP (An) */
+ next = pc;
+ } else if (opc == 0xfc) {
+ /* RETS */
+ next = pc + 2;
+ *(unsigned *) sp = (unsigned) next;
+ } else if (opc == 0xfd) {
+ /* RTI */
+ next = pc + 2;
+ *(unsigned *)(sp + 4) = (unsigned) next;
+ }
+ break;
+
+ case 0xfa: /* CALLS (d16,PC) */
+ pc[2] = 4;
+ pc[3] = 0;
+ next = pc + 4;
+ break;
+
+ case 0xfc: /* CALLS (d32,PC) */
+ pc[2] = 6;
+ pc[3] = 0;
+ pc[4] = 0;
+ pc[5] = 0;
+ next = pc + 6;
+ break;
+
+ case 0xd0 ... 0xda: /* LXX (d8,PC) */
+ case 0xdb: /* SETLB */
+ panic("Can't singlestep Lxx/SETLB\n");
+ }
+
+ return (unsigned) next;
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ return 0;
+}
+
+void __kprobes arch_copy_kprobe(struct kprobe *p)
+{
+ memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE);
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ *p->addr = BREAKPOINT_INSTRUCTION;
+ flush_icache_range((unsigned long) p->addr,
+ (unsigned long) p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ mn10300_dcache_flush();
+ mn10300_icache_inv();
+}
+
+void arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static inline
+void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
+{
+ *p->addr = p->opcode;
+ regs->pc = (unsigned long) p->addr;
+ mn10300_dcache_flush();
+ mn10300_icache_inv();
+}
+
+static inline
+void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+ unsigned long nextpc;
+
+ current_kprobe_orig_pc = regs->pc;
+ memcpy(current_kprobe_ss_buf, &p->ainsn.insn[0], MAX_INSN_SIZE);
+ regs->pc = (unsigned long) current_kprobe_ss_buf;
+
+ nextpc = find_nextpc(regs, &current_kprobe_ss_flags);
+ if (current_kprobe_ss_flags & SINGLESTEP_PCREL)
+ current_kprobe_next_pc =
+ current_kprobe_orig_pc + (nextpc - regs->pc);
+ else
+ current_kprobe_next_pc = nextpc;
+
+ /* branching instructions need special handling */
+ if (current_kprobe_ss_flags & SINGLESTEP_BRANCH)
+ nextpc = singlestep_branch_setup(regs);
+
+ current_kprobe_bp_addr = nextpc;
+
+ *(u8 *) nextpc = BREAKPOINT_INSTRUCTION;
+ mn10300_dcache_flush_range2((unsigned) current_kprobe_ss_buf,
+ sizeof(current_kprobe_ss_buf));
+ mn10300_icache_inv();
+}
+
+static inline int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p;
+ int ret = 0;
+ unsigned int *addr = (unsigned int *) regs->pc;
+
+ /* We're in an interrupt, but this is clear and BUG()-safe. */
+ preempt_disable();
+
+ /* Check we're not actually recursing */
+ if (kprobe_running()) {
+ /* We *are* holding lock here, so this is safe.
+ Disarm the probe we just hit, and ignore it. */
+ p = get_kprobe(addr);
+ if (p) {
+ disarm_kprobe(p, regs);
+ ret = 1;
+ } else {
+ p = current_kprobe;
+ if (p->break_handler && p->break_handler(p, regs))
+ goto ss_probe;
+ }
+ /* If it's not ours, can't be delete race, (we hold lock). */
+ goto no_kprobe;
+ }
+
+ p = get_kprobe(addr);
+ if (!p) {
+ if (*addr != BREAKPOINT_INSTRUCTION) {
+ /* The breakpoint instruction was removed right after
+ * we hit it. Another cpu has removed either a
+ * probepoint or a debugger breakpoint at this address.
+ * In either case, no further handling of this
+ * interrupt is appropriate.
+ */
+ ret = 1;
+ }
+ /* Not one of ours: let kernel handle it */
+ goto no_kprobe;
+ }
+
+ kprobe_status = KPROBE_HIT_ACTIVE;
+ current_kprobe = p;
+ if (p->pre_handler(p, regs)) {
+ /* handler has already set things up, so skip ss setup */
+ return 1;
+ }
+
+ss_probe:
+ prepare_singlestep(p, regs);
+ kprobe_status = KPROBE_HIT_SS;
+ return 1;
+
+no_kprobe:
+ preempt_enable_no_resched();
+ return ret;
+}
+
+/*
+ * Called after single-stepping. p->addr is the address of the
+ * instruction whose first byte has been replaced by the "breakpoint"
+ * instruction. To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction. The address of this
+ * copy is p->ainsn.insn.
+ */
+static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+{
+ /* we may need to fixup regs/stack after singlestepping a call insn */
+ if (current_kprobe_ss_flags & SINGLESTEP_BRANCH) {
+ regs->pc = current_kprobe_orig_pc;
+ switch (p->ainsn.insn[0]) {
+ case 0xcd: /* CALL (d16,PC) */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 5;
+ break;
+ case 0xdd: /* CALL (d32,PC) */
+ /* fixup mdr and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 7;
+ break;
+ case 0xf0:
+ if (p->ainsn.insn[1] >= 0xf0 &&
+ p->ainsn.insn[1] <= 0xf3) {
+ /* CALLS (An) */
+ /* fixup MDR and return address on stack */
+ regs->mdr = regs->pc + 2;
+ *(unsigned *) regs->sp = regs->mdr;
+ }
+ break;
+
+ case 0xfa: /* CALLS (d16,PC) */
+ /* fixup MDR and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 4;
+ break;
+
+ case 0xfc: /* CALLS (d32,PC) */
+ /* fixup MDR and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 6;
+ break;
+ }
+ }
+
+ regs->pc = current_kprobe_next_pc;
+ current_kprobe_bp_addr = 0;
+}
+
+static inline int __kprobes post_kprobe_handler(struct pt_regs *regs)
+{
+ if (!kprobe_running())
+ return 0;
+
+ if (current_kprobe->post_handler)
+ current_kprobe->post_handler(current_kprobe, regs, 0);
+
+ resume_execution(current_kprobe, regs);
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ return 1;
+}
+
+/* Interrupts disabled, kprobe_lock held. */
+static inline
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ if (current_kprobe->fault_handler &&
+ current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+ return 1;
+
+ if (kprobe_status & KPROBE_HIT_SS) {
+ resume_execution(current_kprobe, regs);
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ }
+ return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ struct die_args *args = data;
+
+ switch (val) {
+ case DIE_BREAKPOINT:
+ if (current_kprobe_bp_addr != args->regs->pc) {
+ if (kprobe_handler(args->regs))
+ return NOTIFY_STOP;
+ } else {
+ if (post_kprobe_handler(args->regs))
+ return NOTIFY_STOP;
+ }
+ break;
+ case DIE_GPF:
+ if (kprobe_running() &&
+ kprobe_fault_handler(args->regs, args->trapnr))
+ return NOTIFY_STOP;
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+/* Jprobes support. */
+static struct pt_regs jprobe_saved_regs;
+static struct pt_regs *jprobe_saved_regs_location;
+static kprobe_opcode_t jprobe_saved_stack[MAX_STACK_SIZE];
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ jprobe_saved_regs_location = regs;
+ memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs));
+
+ /* Save a whole stack frame, this gets arguments
+ * pushed onto the stack after using up all the
+ * arg registers.
+ */
+ memcpy(&jprobe_saved_stack, regs + 1, sizeof(jprobe_saved_stack));
+
+ /* setup return addr to the jprobe handler routine */
+ regs->pc = (unsigned long) jp->entry;
+ return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+ void *orig_sp = jprobe_saved_regs_location + 1;
+
+ preempt_enable_no_resched();
+ asm volatile(" mov %0,sp\n"
+ ".globl jprobe_return_bp_addr\n"
+ "jprobe_return_bp_addr:\n\t"
+ " .byte 0xff\n"
+ : : "d" (orig_sp));
+}
+
+extern void jprobe_return_bp_addr(void);
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ u8 *addr = (u8 *) regs->pc;
+
+ if (addr == (u8 *) jprobe_return_bp_addr) {
+ if (jprobe_saved_regs_location != regs) {
+ printk(KERN_ERR"JPROBE:"
+ " Current regs (%p) does not match saved regs"
+ " (%p).\n",
+ regs, jprobe_saved_regs_location);
+ BUG();
+ }
+
+ /* Restore old register state.
+ */
+ memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs));
+
+ memcpy(regs + 1, &jprobe_saved_stack,
+ sizeof(jprobe_saved_stack));
+ return 1;
+ }
+ return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+ return 0;
+}
diff --git a/arch/mn10300/kernel/kthread.S b/arch/mn10300/kernel/kthread.S
new file mode 100644
index 000000000000..b5ae467ac5ec
--- /dev/null
+++ b/arch/mn10300/kernel/kthread.S
@@ -0,0 +1,31 @@
+/* MN10300 Kernel thread trampoline function
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+ .text
+
+###############################################################################
+#
+# kernel_thread_helper - trampoline for kernel_thread()
+#
+# On entry:
+# A2 = address of function to call
+# D2 = function argument
+#
+###############################################################################
+ .globl kernel_thread_helper
+ .type kernel_thread_helper,@function
+kernel_thread_helper:
+ mov do_exit,d1
+ mov d1,(sp)
+ mov d1,mdr
+ mov d2,d0
+ jmp (a2)
+
+ .size kernel_thread_helper,.-kernel_thread_helper
diff --git a/arch/mn10300/kernel/mn10300-debug.c b/arch/mn10300/kernel/mn10300-debug.c
new file mode 100644
index 000000000000..bd8196478cbc
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-debug.c
@@ -0,0 +1,58 @@
+/* Debugging stuff for the MN10300-based processors
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <asm/serial-regs.h>
+
+#undef MN10300_CONSOLE_ON_SERIO
+
+/*
+ * write a string directly through one of the serial ports on-board the MN10300
+ */
+#ifdef MN10300_CONSOLE_ON_SERIO
+void debug_to_serial_mnser(const char *p, int n)
+{
+ char ch;
+
+ for (; n > 0; n--) {
+ ch = *p++;
+
+#if MN10300_CONSOLE_ON_SERIO == 0
+ while (SC0STR & (SC01STR_TBF)) continue;
+ SC0TXB = ch;
+ while (SC0STR & (SC01STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC0TXB = 0x0d;
+ while (SC0STR & (SC01STR_TBF)) continue;
+ }
+
+#elif MN10300_CONSOLE_ON_SERIO == 1
+ while (SC1STR & (SC01STR_TBF)) continue;
+ SC1TXB = ch;
+ while (SC1STR & (SC01STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC1TXB = 0x0d;
+ while (SC1STR & (SC01STR_TBF)) continue;
+ }
+
+#elif MN10300_CONSOLE_ON_SERIO == 2
+ while (SC2STR & (SC2STR_TBF)) continue;
+ SC2TXB = ch;
+ while (SC2STR & (SC2STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC2TXB = 0x0d;
+ while (SC2STR & (SC2STR_TBF)) continue;
+ }
+
+#endif
+ }
+}
+#endif
+
diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
new file mode 100644
index 000000000000..ef3f4c1df2a4
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-serial-low.S
@@ -0,0 +1,191 @@
+###############################################################################
+#
+# Virtual DMA driver for MN10300 serial ports
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/timer-regs.h>
+#include <asm/proc/cache.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+#define SCxCTR 0x00
+#define SCxICR 0x04
+#define SCxTXB 0x08
+#define SCxRXB 0x09
+#define SCxSTR 0x0c
+#define SCxTIM 0x0d
+
+ .text
+
+###############################################################################
+#
+# serial port interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+#
+###############################################################################
+ .balign L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_interrupt)
+ or EPSW_IE,psw # permit overriding by
+ # debugging interrupts
+ movm [d2,d3,a2,a3,exreg0],(sp)
+
+ movhu (IAGR),a2 # see if which interrupt is
+ # pending
+ and IAGR_GN,a2
+ add a2,a2
+ add mn10300_serial_int_tbl,a2
+
+ mov (a2+),a3
+ mov (__iobase,a3),e2
+ mov (a2),a2
+ jmp (a2)
+
+###############################################################################
+#
+# serial port receive interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - stores data/status byte pairs in the ring buffer
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+# on entry:
+# A3 struct mn10300_serial_port *
+# E2 I/O port base
+#
+###############################################################################
+ENTRY(mn10300_serial_vdma_rx_handler)
+ mov (__rx_icr,a3),e3
+ mov GxICR_DETECT,d2
+ movbu d2,(e3) # ACK the interrupt
+ movhu (e3),d2 # flush
+
+ mov (__rx_inp,a3),d3
+ mov d3,a2
+ add 2,d3
+ and MNSC_BUFFER_SIZE-1,d3
+ mov (__rx_outp,a3),d2
+ cmp d3,d2
+ beq mnsc_vdma_rx_overflow
+
+ mov (__rx_buffer,a3),d2
+ add d2,a2
+ movhu (SCxSTR,e2),d2
+ movbu d2,(1,a2)
+ movbu (SCxRXB,e2),d2
+ movbu d2,(a2)
+ mov d3,(__rx_inp,a3)
+ bset MNSCx_RX_AVAIL,(__intr_flags,a3)
+
+mnsc_vdma_rx_done:
+ mov (__tm_icr,a3),a2
+ mov GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+ movhu d2,(a2) # request a slow interrupt
+ movhu (a2),d2 # flush
+
+ movm (sp),[d2,d3,a2,a3,exreg0]
+ rti
+
+mnsc_vdma_rx_overflow:
+ bset MNSCx_RX_OVERF,(__intr_flags,a3)
+ bra mnsc_vdma_rx_done
+
+###############################################################################
+#
+# serial port transmit interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - retrieves data bytes from the ring buffer and passes them to the serial port
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+# A3 struct mn10300_serial_port *
+# E2 I/O port base
+#
+###############################################################################
+ .balign L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_tx_handler)
+ mov (__tx_icr,a3),e3
+ mov GxICR_DETECT,d2
+ movbu d2,(e3) # ACK the interrupt
+ movhu (e3),d2 # flush
+
+ btst 0x01,(__tx_break,a3) # handle transmit break request
+ bne mnsc_vdma_tx_break
+
+ movbu (SCxSTR,e2),d2 # don't try and transmit a char if the
+ # buffer is not empty
+ btst SC01STR_TBF,d2 # (may have tried to jumpstart)
+ bne mnsc_vdma_tx_noint
+
+ movbu (__tx_xchar,a3),d2 # handle hi-pri XON/XOFF
+ or d2,d2
+ bne mnsc_vdma_tx_xchar
+
+ mov (__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+ mov (__xmit_tail,a2),d3
+ mov (__xmit_head,a2),d2
+ cmp d3,d2
+ beq mnsc_vdma_tx_empty
+
+ mov (__xmit_buffer,a2),d2 # get a char from the buffer and
+ # transmit it
+ movbu (d3,d2),d2
+ movbu d2,(SCxTXB,e2) # Tx
+
+ inc d3 # advance the buffer pointer
+ and __UART_XMIT_SIZE-1,d3
+ mov (__xmit_head,a2),d2
+ mov d3,(__xmit_tail,a2)
+
+ sub d3,d2 # see if we've written everything
+ beq mnsc_vdma_tx_empty
+
+ and __UART_XMIT_SIZE-1,d2 # see if we just made a hole
+ cmp __UART_XMIT_SIZE-2,d2
+ beq mnsc_vdma_tx_made_hole
+
+mnsc_vdma_tx_done:
+ mov (__tm_icr,a3),a2
+ mov GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+ movhu d2,(a2) # request a slow interrupt
+ movhu (a2),d2 # flush
+
+mnsc_vdma_tx_noint:
+ movm (sp),[d2,d3,a2,a3,exreg0]
+ rti
+
+mnsc_vdma_tx_empty:
+ mov +(GxICR_LEVEL_1|GxICR_DETECT),d2
+ movhu d2,(e3) # disable the interrupt
+ movhu (e3),d2 # flush
+
+ bset MNSCx_TX_EMPTY,(__intr_flags,a3)
+ bra mnsc_vdma_tx_done
+
+mnsc_vdma_tx_break:
+ movhu (SCxCTR,e2),d2 # turn on break mode
+ or SC01CTR_BKE,d2
+ movhu d2,(SCxCTR,e2)
+ mov +(GxICR_LEVEL_1|GxICR_DETECT),d2
+ movhu d2,(e3) # disable transmit interrupts on this
+ # channel
+ movhu (e3),d2 # flush
+ bra mnsc_vdma_tx_noint
+
+mnsc_vdma_tx_xchar:
+ bclr 0xff,(__tx_xchar,a3)
+ movbu d2,(SCxTXB,e2)
+ bra mnsc_vdma_tx_done
+
+mnsc_vdma_tx_made_hole:
+ bset MNSCx_TX_SPACE,(__intr_flags,a3)
+ bra mnsc_vdma_tx_done
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
new file mode 100644
index 000000000000..b9c268c6b2fb
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -0,0 +1,1480 @@
+/* MN10300 On-chip serial port UART driver
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+static const char serial_name[] = "MN10300 Serial driver";
+static const char serial_version[] = "mn10300_serial-1.0";
+static const char serial_revdate[] = "2007-11-06";
+
+#if defined(CONFIG_MN10300_TTYSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/circ_buf.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bitops.h>
+#include <asm/serial-regs.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+static inline __attribute__((format(printf, 1, 2)))
+void no_printk(const char *fmt, ...)
+{
+}
+
+#define kenter(FMT, ...) \
+ printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
+#define _enter(FMT, ...) \
+ no_printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
+#define kdebug(FMT, ...) \
+ printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__)
+#define _debug(FMT, ...) \
+ no_printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__)
+#define kproto(FMT, ...) \
+ printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
+#define _proto(FMT, ...) \
+ no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
+
+#define NR_UARTS 3
+
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+static void mn10300_serial_console_write(struct console *co,
+ const char *s, unsigned count);
+static int __init mn10300_serial_console_setup(struct console *co,
+ char *options);
+
+static struct uart_driver mn10300_serial_driver;
+static struct console mn10300_serial_console = {
+ .name = "ttySM",
+ .write = mn10300_serial_console_write,
+ .device = uart_console_device,
+ .setup = mn10300_serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &mn10300_serial_driver,
+};
+#endif
+
+static struct uart_driver mn10300_serial_driver = {
+ .owner = NULL,
+ .driver_name = "mn10300-serial",
+ .dev_name = "ttySM",
+ .major = TTY_MAJOR,
+ .minor = 128,
+ .nr = NR_UARTS,
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+ .cons = &mn10300_serial_console,
+#endif
+};
+
+static unsigned int mn10300_serial_tx_empty(struct uart_port *);
+static void mn10300_serial_set_mctrl(struct uart_port *, unsigned int mctrl);
+static unsigned int mn10300_serial_get_mctrl(struct uart_port *);
+static void mn10300_serial_stop_tx(struct uart_port *);
+static void mn10300_serial_start_tx(struct uart_port *);
+static void mn10300_serial_send_xchar(struct uart_port *, char ch);
+static void mn10300_serial_stop_rx(struct uart_port *);
+static void mn10300_serial_enable_ms(struct uart_port *);
+static void mn10300_serial_break_ctl(struct uart_port *, int ctl);
+static int mn10300_serial_startup(struct uart_port *);
+static void mn10300_serial_shutdown(struct uart_port *);
+static void mn10300_serial_set_termios(struct uart_port *,
+ struct ktermios *new,
+ struct ktermios *old);
+static const char *mn10300_serial_type(struct uart_port *);
+static void mn10300_serial_release_port(struct uart_port *);
+static int mn10300_serial_request_port(struct uart_port *);
+static void mn10300_serial_config_port(struct uart_port *, int);
+static int mn10300_serial_verify_port(struct uart_port *,
+ struct serial_struct *);
+
+static const struct uart_ops mn10300_serial_ops = {
+ .tx_empty = mn10300_serial_tx_empty,
+ .set_mctrl = mn10300_serial_set_mctrl,
+ .get_mctrl = mn10300_serial_get_mctrl,
+ .stop_tx = mn10300_serial_stop_tx,
+ .start_tx = mn10300_serial_start_tx,
+ .send_xchar = mn10300_serial_send_xchar,
+ .stop_rx = mn10300_serial_stop_rx,
+ .enable_ms = mn10300_serial_enable_ms,
+ .break_ctl = mn10300_serial_break_ctl,
+ .startup = mn10300_serial_startup,
+ .shutdown = mn10300_serial_shutdown,
+ .set_termios = mn10300_serial_set_termios,
+ .type = mn10300_serial_type,
+ .release_port = mn10300_serial_release_port,
+ .request_port = mn10300_serial_request_port,
+ .config_port = mn10300_serial_config_port,
+ .verify_port = mn10300_serial_verify_port,
+};
+
+static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id);
+
+/*
+ * the first on-chip serial port: ttySM0 (aka SIF0)
+ */
+#ifdef CONFIG_MN10300_TTYSM0
+struct mn10300_serial_port mn10300_serial_port_sif0 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC0CTR,
+ .uart.mapbase = (unsigned long) &SC0CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 0,
+ .uart.type = PORT_MN10300,
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif0.uart.lock),
+ .name = "ttySM0",
+ ._iobase = &SC0CTR,
+ ._control = &SC0CTR,
+ ._status = (volatile u8 *) &SC0STR,
+ ._intr = &SC0ICR,
+ ._rxb = &SC0RXB,
+ ._txb = &SC0TXB,
+ .rx_name = "ttySM0/Rx",
+ .tx_name = "ttySM0/Tx",
+#ifdef CONFIG_MN10300_TTYSM0_TIMER8
+ .tm_name = "ttySM0/Timer8",
+ ._tmxmd = &TM8MD,
+ ._tmxbr = &TM8BR,
+ ._tmicr = &TM8ICR,
+ .tm_irq = TM8IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+#else /* CONFIG_MN10300_TTYSM0_TIMER2 */
+ .tm_name = "ttySM0/Timer2",
+ ._tmxmd = &TM2MD,
+ ._tmxbr = (volatile u16 *) &TM2BR,
+ ._tmicr = &TM2ICR,
+ .tm_irq = TM2IRQ,
+ .div_timer = MNSCx_DIV_TIMER_8BIT,
+#endif
+ .rx_irq = SC0RXIRQ,
+ .tx_irq = SC0TXIRQ,
+ .rx_icr = &GxICR(SC0RXIRQ),
+ .tx_icr = &GxICR(SC0TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+ .options = 0,
+#ifdef CONFIG_GDBSTUB_ON_TTYSM0
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM0 */
+
+/*
+ * the second on-chip serial port: ttySM1 (aka SIF1)
+ */
+#ifdef CONFIG_MN10300_TTYSM1
+struct mn10300_serial_port mn10300_serial_port_sif1 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC1CTR,
+ .uart.mapbase = (unsigned long) &SC1CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 1,
+ .uart.type = PORT_MN10300,
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif1.uart.lock),
+ .name = "ttySM1",
+ ._iobase = &SC1CTR,
+ ._control = &SC1CTR,
+ ._status = (volatile u8 *) &SC1STR,
+ ._intr = &SC1ICR,
+ ._rxb = &SC1RXB,
+ ._txb = &SC1TXB,
+ .rx_name = "ttySM1/Rx",
+ .tx_name = "ttySM1/Tx",
+#ifdef CONFIG_MN10300_TTYSM1_TIMER9
+ .tm_name = "ttySM1/Timer9",
+ ._tmxmd = &TM9MD,
+ ._tmxbr = &TM9BR,
+ ._tmicr = &TM9ICR,
+ .tm_irq = TM9IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+#else /* CONFIG_MN10300_TTYSM1_TIMER3 */
+ .tm_name = "ttySM1/Timer3",
+ ._tmxmd = &TM3MD,
+ ._tmxbr = (volatile u16 *) &TM3BR,
+ ._tmicr = &TM3ICR,
+ .tm_irq = TM3IRQ,
+ .div_timer = MNSCx_DIV_TIMER_8BIT,
+#endif
+ .rx_irq = SC1RXIRQ,
+ .tx_irq = SC1TXIRQ,
+ .rx_icr = &GxICR(SC1RXIRQ),
+ .tx_icr = &GxICR(SC1TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+ .options = 0,
+#ifdef CONFIG_GDBSTUB_ON_TTYSM1
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM1 */
+
+/*
+ * the third on-chip serial port: ttySM2 (aka SIF2)
+ */
+#ifdef CONFIG_MN10300_TTYSM2
+struct mn10300_serial_port mn10300_serial_port_sif2 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC2CTR,
+ .uart.mapbase = (unsigned long) &SC2CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 2,
+#ifdef CONFIG_MN10300_TTYSM2_CTS
+ .uart.type = PORT_MN10300_CTS,
+#else
+ .uart.type = PORT_MN10300,
+#endif
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
+ .name = "ttySM2",
+ .rx_name = "ttySM2/Rx",
+ .tx_name = "ttySM2/Tx",
+ .tm_name = "ttySM2/Timer10",
+ ._iobase = &SC2CTR,
+ ._control = &SC2CTR,
+ ._status = &SC2STR,
+ ._intr = &SC2ICR,
+ ._rxb = &SC2RXB,
+ ._txb = &SC2TXB,
+ ._tmxmd = &TM10MD,
+ ._tmxbr = &TM10BR,
+ ._tmicr = &TM10ICR,
+ .tm_irq = TM10IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+ .rx_irq = SC2RXIRQ,
+ .tx_irq = SC2TXIRQ,
+ .rx_icr = &GxICR(SC2RXIRQ),
+ .tx_icr = &GxICR(SC2TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+#ifdef CONFIG_MN10300_TTYSM2_CTS
+ .options = MNSCx_OPT_CTS,
+#else
+ .options = 0,
+#endif
+#ifdef CONFIG_GDBSTUB_ON_TTYSM2
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM2 */
+
+
+/*
+ * list of available serial ports
+ */
+struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = {
+#ifdef CONFIG_MN10300_TTYSM0
+ [0] = &mn10300_serial_port_sif0,
+#endif
+#ifdef CONFIG_MN10300_TTYSM1
+ [1] = &mn10300_serial_port_sif1,
+#endif
+#ifdef CONFIG_MN10300_TTYSM2
+ [2] = &mn10300_serial_port_sif2,
+#endif
+ [NR_UARTS] = NULL,
+};
+
+
+/*
+ * we abuse the serial ports' baud timers' interrupt lines to get the ability
+ * to deliver interrupts to userspace as we use the ports' interrupt lines to
+ * do virtual DMA on account of the ports having no hardware FIFOs
+ *
+ * we can generate an interrupt manually in the assembly stubs by writing to
+ * the enable and detect bits in the interrupt control register, so all we need
+ * to do here is disable the interrupt line
+ *
+ * note that we can't just leave the line enabled as the baud rate timer *also*
+ * generates interrupts
+ */
+static void mn10300_serial_mask_ack(unsigned int irq)
+{
+ u16 tmp;
+ GxICR(irq) = GxICR_LEVEL_6;
+ tmp = GxICR(irq); /* flush write buffer */
+}
+
+static void mn10300_serial_nop(unsigned int irq)
+{
+}
+
+static struct irq_chip mn10300_serial_pic = {
+ .name = "mnserial",
+ .ack = mn10300_serial_mask_ack,
+ .mask = mn10300_serial_mask_ack,
+ .mask_ack = mn10300_serial_mask_ack,
+ .unmask = mn10300_serial_nop,
+ .end = mn10300_serial_nop,
+};
+
+
+/*
+ * serial virtual DMA interrupt jump table
+ */
+struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS];
+
+static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+ x = *port->tx_icr;
+}
+
+static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE;
+ x = *port->tx_icr;
+}
+
+static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+ x = *port->rx_icr;
+}
+
+/*
+ * multi-bit equivalent of test_and_clear_bit()
+ */
+static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
+{
+ u32 epsw;
+ asm volatile(" bclr %1,(%2) \n"
+ " mov epsw,%0 \n"
+ : "=d"(epsw) : "d"(mask), "a"(ptr));
+ return !(epsw & EPSW_FLAG_Z);
+}
+
+/*
+ * receive chars from the ring buffer for this serial port
+ * - must do break detection here (not done in the UART)
+ */
+static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
+{
+ struct uart_icount *icount = &port->uart.icount;
+ struct tty_struct *tty = port->uart.info->tty;
+ unsigned ix;
+ int count;
+ u8 st, ch, push, status, overrun;
+
+ _enter("%s", port->name);
+
+ push = 0;
+
+ count = CIRC_CNT(port->rx_inp, port->rx_outp, MNSC_BUFFER_SIZE);
+ count = tty_buffer_request_room(tty, count);
+ if (count == 0) {
+ if (!tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+try_again:
+ /* pull chars out of the hat */
+ ix = port->rx_outp;
+ if (ix == port->rx_inp) {
+ if (push && !tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+ ch = port->rx_buffer[ix++];
+ st = port->rx_buffer[ix++];
+ smp_rmb();
+ port->rx_outp = ix & (MNSC_BUFFER_SIZE - 1);
+ port->uart.icount.rx++;
+
+ st &= SC01STR_FEF | SC01STR_PEF | SC01STR_OEF;
+ status = 0;
+ overrun = 0;
+
+ /* the UART doesn't detect BREAK, so we have to do that ourselves
+ * - it starts as a framing error on a NUL character
+ * - then we count another two NUL characters before issuing TTY_BREAK
+ * - then we end on a normal char or one that has all the bottom bits
+ * zero and the top bits set
+ */
+ switch (port->rx_brk) {
+ case 0:
+ /* not breaking at the moment */
+ break;
+
+ case 1:
+ if (st & SC01STR_FEF && ch == 0) {
+ port->rx_brk = 2;
+ goto try_again;
+ }
+ goto not_break;
+
+ case 2:
+ if (st & SC01STR_FEF && ch == 0) {
+ port->rx_brk = 3;
+ _proto("Rx Break Detected");
+ icount->brk++;
+ if (uart_handle_break(&port->uart))
+ goto ignore_char;
+ status |= 1 << TTY_BREAK;
+ goto insert;
+ }
+ goto not_break;
+
+ default:
+ if (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF))
+ goto try_again; /* still breaking */
+
+ port->rx_brk = 0; /* end of the break */
+
+ switch (ch) {
+ case 0xFF:
+ case 0xFE:
+ case 0xFC:
+ case 0xF8:
+ case 0xF0:
+ case 0xE0:
+ case 0xC0:
+ case 0x80:
+ case 0x00:
+ /* discard char at probable break end */
+ goto try_again;
+ }
+ break;
+ }
+
+process_errors:
+ /* handle framing error */
+ if (st & SC01STR_FEF) {
+ if (ch == 0) {
+ /* framing error with NUL char is probably a BREAK */
+ port->rx_brk = 1;
+ goto try_again;
+ }
+
+ _proto("Rx Framing Error");
+ icount->frame++;
+ status |= 1 << TTY_FRAME;
+ }
+
+ /* handle parity error */
+ if (st & SC01STR_PEF) {
+ _proto("Rx Parity Error");
+ icount->parity++;
+ status = TTY_PARITY;
+ }
+
+ /* handle normal char */
+ if (status == 0) {
+ if (uart_handle_sysrq_char(&port->uart, ch))
+ goto ignore_char;
+ status = (1 << TTY_NORMAL);
+ }
+
+ /* handle overrun error */
+ if (st & SC01STR_OEF) {
+ if (port->rx_brk)
+ goto try_again;
+
+ _proto("Rx Overrun Error");
+ icount->overrun++;
+ overrun = 1;
+ }
+
+insert:
+ status &= port->uart.read_status_mask;
+
+ if (!overrun && !(status & port->uart.ignore_status_mask)) {
+ int flag;
+
+ if (status & (1 << TTY_BREAK))
+ flag = TTY_BREAK;
+ else if (status & (1 << TTY_PARITY))
+ flag = TTY_PARITY;
+ else if (status & (1 << TTY_FRAME))
+ flag = TTY_FRAME;
+ else
+ flag = TTY_NORMAL;
+
+ tty_insert_flip_char(tty, ch, flag);
+ }
+
+ /* overrun is special, since it's reported immediately, and doesn't
+ * affect the current character
+ */
+ if (overrun)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ count--;
+ if (count <= 0) {
+ if (!tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+ignore_char:
+ push = 1;
+ goto try_again;
+
+not_break:
+ port->rx_brk = 0;
+ goto process_errors;
+}
+
+/*
+ * handle an interrupt from the serial transmission "virtual DMA" driver
+ * - note: the interrupt routine will disable its own interrupts when the Tx
+ * buffer is empty
+ */
+static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
+{
+ _enter("%s", port->name);
+
+ if (uart_tx_stopped(&port->uart) ||
+ uart_circ_empty(&port->uart.info->xmit))
+ mn10300_serial_dis_tx_intr(port);
+
+ if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&port->uart);
+}
+
+/*
+ * deal with a change in the status of the CTS line
+ */
+static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st)
+{
+ u16 ctr;
+
+ port->tx_cts = st;
+ port->uart.icount.cts++;
+
+ /* flip the CTS state selector flag to interrupt when it changes
+ * back */
+ ctr = *port->_control;
+ ctr ^= SC2CTR_TWS;
+ *port->_control = ctr;
+
+ uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
+ wake_up_interruptible(&port->uart.info->delta_msr_wait);
+}
+
+/*
+ * handle a virtual interrupt generated by the lower level "virtual DMA"
+ * routines (irq is the baud timer interrupt)
+ */
+static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id)
+{
+ struct mn10300_serial_port *port = dev_id;
+ u8 st;
+
+ spin_lock(&port->uart.lock);
+
+ if (port->intr_flags) {
+ _debug("INT %s: %x", port->name, port->intr_flags);
+
+ if (mask_test_and_clear(&port->intr_flags, MNSCx_RX_AVAIL))
+ mn10300_serial_receive_interrupt(port);
+
+ if (mask_test_and_clear(&port->intr_flags,
+ MNSCx_TX_SPACE | MNSCx_TX_EMPTY))
+ mn10300_serial_transmit_interrupt(port);
+ }
+
+ /* the only modem control line amongst the whole lot is CTS on
+ * serial port 2 */
+ if (port->type == PORT_MN10300_CTS) {
+ st = *port->_status;
+ if ((port->tx_cts ^ st) & SC2STR_CTS)
+ mn10300_serial_cts_changed(port, st);
+ }
+
+ spin_unlock(&port->uart.lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * return indication of whether the hardware transmit buffer is empty
+ */
+static unsigned int mn10300_serial_tx_empty(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ return (*port->_status & (SC01STR_TXF | SC01STR_TBF)) ?
+ 0 : TIOCSER_TEMT;
+}
+
+/*
+ * set the modem control lines (we don't have any)
+ */
+static void mn10300_serial_set_mctrl(struct uart_port *_port,
+ unsigned int mctrl)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%x", port->name, mctrl);
+}
+
+/*
+ * get the modem control line statuses
+ */
+static unsigned int mn10300_serial_get_mctrl(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ if (port->type == PORT_MN10300_CTS && !(*port->_status & SC2STR_CTS))
+ return TIOCM_CAR | TIOCM_DSR;
+
+ return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR;
+}
+
+/*
+ * stop transmitting characters
+ */
+static void mn10300_serial_stop_tx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ /* disable the virtual DMA */
+ mn10300_serial_dis_tx_intr(port);
+}
+
+/*
+ * start transmitting characters
+ * - jump-start transmission if it has stalled
+ * - enable the serial Tx interrupt (used by the virtual DMA controller)
+ * - force an interrupt to happen if necessary
+ */
+static void mn10300_serial_start_tx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 x;
+
+ _enter("%s{%lu}",
+ port->name,
+ CIRC_CNT(&port->uart.info->xmit.head,
+ &port->uart.info->xmit.tail,
+ UART_XMIT_SIZE));
+
+ /* kick the virtual DMA controller */
+ x = *port->tx_icr;
+ x |= GxICR_ENABLE;
+
+ if (*port->_status & SC01STR_TBF)
+ x &= ~(GxICR_REQUEST | GxICR_DETECT);
+ else
+ x |= GxICR_REQUEST | GxICR_DETECT;
+
+ _debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx",
+ *port->_control, *port->_intr, *port->_status,
+ *port->_tmxmd, *port->_tmxbr, *port->tx_icr);
+
+ *port->tx_icr = x;
+ x = *port->tx_icr;
+}
+
+/*
+ * transmit a high-priority XON/XOFF character
+ */
+static void mn10300_serial_send_xchar(struct uart_port *_port, char ch)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%02x", port->name, ch);
+
+ if (likely(port->gdbstub)) {
+ port->tx_xchar = ch;
+ if (ch)
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * stop receiving characters
+ * - called whilst the port is being closed
+ */
+static void mn10300_serial_stop_rx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 ctr;
+
+ _enter("%s", port->name);
+
+ ctr = *port->_control;
+ ctr &= ~SC01CTR_RXE;
+ *port->_control = ctr;
+
+ mn10300_serial_dis_rx_intr(port);
+}
+
+/*
+ * enable modem status interrupts
+ */
+static void mn10300_serial_enable_ms(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 ctr, cts;
+
+ _enter("%s", port->name);
+
+ if (port->type == PORT_MN10300_CTS) {
+ /* want to interrupt when CTS goes low if CTS is now high and
+ * vice versa
+ */
+ port->tx_cts = *port->_status;
+
+ cts = (port->tx_cts & SC2STR_CTS) ?
+ SC2CTR_TWE : SC2CTR_TWE | SC2CTR_TWS;
+
+ ctr = *port->_control;
+ ctr &= ~SC2CTR_TWS;
+ ctr |= cts;
+ *port->_control = ctr;
+
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * transmit or cease transmitting a break signal
+ */
+static void mn10300_serial_break_ctl(struct uart_port *_port, int ctl)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%d", port->name, ctl);
+
+ if (ctl) {
+ /* tell the virtual DMA handler to assert BREAK */
+ port->tx_break = 1;
+ mn10300_serial_en_tx_intr(port);
+ } else {
+ port->tx_break = 0;
+ *port->_control &= ~SC01CTR_BKE;
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * grab the interrupts and enable the port for reception
+ */
+static int mn10300_serial_startup(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+ struct mn10300_serial_int *pint;
+
+ _enter("%s{%d}", port->name, port->gdbstub);
+
+ if (unlikely(port->gdbstub))
+ return -EBUSY;
+
+ /* allocate an Rx buffer for the virtual DMA handler */
+ port->rx_buffer = kmalloc(MNSC_BUFFER_SIZE, GFP_KERNEL);
+ if (!port->rx_buffer)
+ return -ENOMEM;
+
+ port->rx_inp = port->rx_outp = 0;
+
+ /* finally, enable the device */
+ *port->_intr = SC01ICR_TI;
+ *port->_control |= SC01CTR_TXE | SC01CTR_RXE;
+
+ pint = &mn10300_serial_int_tbl[port->rx_irq];
+ pint->port = port;
+ pint->vdma = mn10300_serial_vdma_rx_handler;
+ pint = &mn10300_serial_int_tbl[port->tx_irq];
+ pint->port = port;
+ pint->vdma = mn10300_serial_vdma_tx_handler;
+
+ set_intr_level(port->rx_irq, GxICR_LEVEL_1);
+ set_intr_level(port->tx_irq, GxICR_LEVEL_1);
+ set_irq_chip(port->tm_irq, &mn10300_serial_pic);
+
+ if (request_irq(port->rx_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->rx_name, port) < 0)
+ goto error;
+
+ if (request_irq(port->tx_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->tx_name, port) < 0)
+ goto error2;
+
+ if (request_irq(port->tm_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->tm_name, port) < 0)
+ goto error3;
+ mn10300_serial_mask_ack(port->tm_irq);
+
+ return 0;
+
+error3:
+ free_irq(port->tx_irq, port);
+error2:
+ free_irq(port->rx_irq, port);
+error:
+ kfree(port->rx_buffer);
+ port->rx_buffer = NULL;
+ return -EBUSY;
+}
+
+/*
+ * shutdown the port and release interrupts
+ */
+static void mn10300_serial_shutdown(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ /* disable the serial port and its baud rate timer */
+ port->tx_break = 0;
+ *port->_control &= ~(SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
+ *port->_tmxmd = 0;
+
+ if (port->rx_buffer) {
+ void *buf = port->rx_buffer;
+ port->rx_buffer = NULL;
+ kfree(buf);
+ }
+
+ /* disable all intrs */
+ free_irq(port->tm_irq, port);
+ free_irq(port->rx_irq, port);
+ free_irq(port->tx_irq, port);
+
+ *port->rx_icr = GxICR_LEVEL_1;
+ *port->tx_icr = GxICR_LEVEL_1;
+}
+
+/*
+ * this routine is called to set the UART divisor registers to match the
+ * specified baud rate for a serial port.
+ */
+static void mn10300_serial_change_speed(struct mn10300_serial_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned long ioclk = port->ioclk;
+ unsigned cflag;
+ int baud, bits, xdiv, tmp;
+ u16 tmxbr, scxctr;
+ u8 tmxmd, battempt;
+ u8 div_timer = port->div_timer;
+
+ _enter("%s{%lu}", port->name, ioclk);
+
+ /* byte size and parity */
+ cflag = new->c_cflag;
+ switch (cflag & CSIZE) {
+ case CS7: scxctr = SC01CTR_CLN_7BIT; bits = 9; break;
+ case CS8: scxctr = SC01CTR_CLN_8BIT; bits = 10; break;
+ default: scxctr = SC01CTR_CLN_8BIT; bits = 10; break;
+ }
+
+ if (cflag & CSTOPB) {
+ scxctr |= SC01CTR_STB_2BIT;
+ bits++;
+ }
+
+ if (cflag & PARENB) {
+ bits++;
+ if (cflag & PARODD)
+ scxctr |= SC01CTR_PB_ODD;
+#ifdef CMSPAR
+ else if (cflag & CMSPAR)
+ scxctr |= SC01CTR_PB_FIXED0;
+#endif
+ else
+ scxctr |= SC01CTR_PB_EVEN;
+ }
+
+ /* Determine divisor based on baud rate */
+ battempt = 0;
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT)
+ scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8
+ * == SC2CTR_CK_TM10UFLOW) */
+ else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+ scxctr |= SC0CTR_CK_TM2UFLOW_8;
+
+try_alternative:
+ baud = uart_get_baud_rate(&port->uart, new, old, 0,
+ port->ioclk / 8);
+
+ _debug("ALT %d [baud %d]", battempt, baud);
+
+ if (!baud)
+ baud = 9600; /* B0 transition handled in rs_set_termios */
+ xdiv = 1;
+ if (baud == 134) {
+ baud = 269; /* 134 is really 134.5 */
+ xdiv = 2;
+ }
+
+ if (baud == 38400 &&
+ (port->uart.flags & UPF_SPD_MASK) == UPF_SPD_CUST
+ ) {
+ _debug("CUSTOM %u", port->uart.custom_divisor);
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT) {
+ if (port->uart.custom_divisor <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = port->uart.custom_divisor;
+ port->uart.uartclk = ioclk;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 8 <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = port->uart.custom_divisor / 8;
+ port->uart.custom_divisor = tmxbr * 8;
+ port->uart.uartclk = ioclk / 8;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 32 <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = port->uart.custom_divisor / 32;
+ port->uart.custom_divisor = tmxbr * 32;
+ port->uart.uartclk = ioclk / 32;
+ goto timer_okay;
+ }
+
+ } else if (div_timer == MNSCx_DIV_TIMER_8BIT) {
+ if (port->uart.custom_divisor <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = port->uart.custom_divisor;
+ port->uart.uartclk = ioclk;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 8 <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = port->uart.custom_divisor / 8;
+ port->uart.custom_divisor = tmxbr * 8;
+ port->uart.uartclk = ioclk / 8;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 32 <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = port->uart.custom_divisor / 32;
+ port->uart.custom_divisor = tmxbr * 32;
+ port->uart.uartclk = ioclk / 32;
+ goto timer_okay;
+ }
+ }
+ }
+
+ switch (div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ port->uart.uartclk = ioclk;
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 8;
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 32;
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ port->uart.uartclk = ioclk;
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 8;
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 32;
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+ break;
+
+ default:
+ BUG();
+ return;
+ }
+
+ /* refuse to change to a baud rate we can't support */
+ _debug("CAN'T SUPPORT");
+
+ switch (battempt) {
+ case 0:
+ if (old) {
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= (old->c_cflag & CBAUD);
+ battempt = 1;
+ goto try_alternative;
+ }
+
+ case 1:
+ /* as a last resort, if the quotient is zero, default to 9600
+ * bps */
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= B9600;
+ battempt = 2;
+ goto try_alternative;
+
+ default:
+ /* hmmm... can't seem to support 9600 either
+ * - we could try iterating through the speeds we know about to
+ * find the lowest
+ */
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= B0;
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT)
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = 1;
+
+ port->uart.uartclk = ioclk / 32;
+ break;
+ }
+timer_okay:
+
+ _debug("UARTCLK: %u / %hu", port->uart.uartclk, tmxbr);
+
+ /* make the changes */
+ spin_lock_irqsave(&port->uart.lock, flags);
+
+ uart_update_timeout(&port->uart, new->c_cflag, baud);
+
+ /* set the timer to produce the required baud rate */
+ switch (div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxbr = tmxbr;
+ *port->_tmxmd = TM8MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *port->_tmxmd = 0;
+ *(volatile u8 *) port->_tmxbr = (u8) tmxbr;
+ *port->_tmxmd = TM2MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+
+ /* CTS flow control flag and modem status interrupts */
+ scxctr &= ~(SC2CTR_TWE | SC2CTR_TWS);
+
+ if (port->type == PORT_MN10300_CTS && cflag & CRTSCTS) {
+ /* want to interrupt when CTS goes low if CTS is now
+ * high and vice versa
+ */
+ port->tx_cts = *port->_status;
+
+ if (port->tx_cts & SC2STR_CTS)
+ scxctr |= SC2CTR_TWE;
+ else
+ scxctr |= SC2CTR_TWE | SC2CTR_TWS;
+ }
+
+ /* set up parity check flag */
+ port->uart.read_status_mask = (1 << TTY_NORMAL) | (1 << TTY_OVERRUN);
+ if (new->c_iflag & INPCK)
+ port->uart.read_status_mask |=
+ (1 << TTY_PARITY) | (1 << TTY_FRAME);
+ if (new->c_iflag & (BRKINT | PARMRK))
+ port->uart.read_status_mask |= (1 << TTY_BREAK);
+
+ /* characters to ignore */
+ port->uart.ignore_status_mask = 0;
+ if (new->c_iflag & IGNPAR)
+ port->uart.ignore_status_mask |=
+ (1 << TTY_PARITY) | (1 << TTY_FRAME);
+ if (new->c_iflag & IGNBRK) {
+ port->uart.ignore_status_mask |= (1 << TTY_BREAK);
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns to (for real raw support).
+ */
+ if (new->c_iflag & IGNPAR)
+ port->uart.ignore_status_mask |= (1 << TTY_OVERRUN);
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((new->c_cflag & CREAD) == 0)
+ port->uart.ignore_status_mask |= (1 << TTY_NORMAL);
+
+ scxctr |= *port->_control & (SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
+ *port->_control = scxctr;
+
+ spin_unlock_irqrestore(&port->uart.lock, flags);
+}
+
+/*
+ * set the terminal I/O parameters
+ */
+static void mn10300_serial_set_termios(struct uart_port *_port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%p,%p", port->name, new, old);
+
+ mn10300_serial_change_speed(port, new, old);
+
+ /* handle turning off CRTSCTS */
+ if (!(new->c_cflag & CRTSCTS)) {
+ u16 ctr = *port->_control;
+ ctr &= ~SC2CTR_TWE;
+ *port->_control = ctr;
+ }
+}
+
+/*
+ * return description of port type
+ */
+static const char *mn10300_serial_type(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ if (port->uart.type == PORT_MN10300_CTS)
+ return "MN10300 SIF_CTS";
+
+ return "MN10300 SIF";
+}
+
+/*
+ * release I/O and memory regions in use by port
+ */
+static void mn10300_serial_release_port(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ release_mem_region((unsigned long) port->_iobase, 16);
+}
+
+/*
+ * request I/O and memory regions for port
+ */
+static int mn10300_serial_request_port(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ request_mem_region((unsigned long) port->_iobase, 16, port->name);
+ return 0;
+}
+
+/*
+ * configure the type and reserve the ports
+ */
+static void mn10300_serial_config_port(struct uart_port *_port, int type)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ port->uart.type = PORT_MN10300;
+
+ if (port->options & MNSCx_OPT_CTS)
+ port->uart.type = PORT_MN10300_CTS;
+
+ mn10300_serial_request_port(_port);
+}
+
+/*
+ * verify serial parameters are suitable for this port type
+ */
+static int mn10300_serial_verify_port(struct uart_port *_port,
+ struct serial_struct *ss)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+ void *mapbase = (void *) (unsigned long) port->uart.mapbase;
+
+ _enter("%s", port->name);
+
+ /* these things may not be changed */
+ if (ss->irq != port->uart.irq ||
+ ss->port != port->uart.iobase ||
+ ss->io_type != port->uart.iotype ||
+ ss->iomem_base != mapbase ||
+ ss->iomem_reg_shift != port->uart.regshift ||
+ ss->hub6 != port->uart.hub6 ||
+ ss->xmit_fifo_size != port->uart.fifosize)
+ return -EINVAL;
+
+ /* type may be changed on a port that supports CTS */
+ if (ss->type != port->uart.type) {
+ if (!(port->options & MNSCx_OPT_CTS))
+ return -EINVAL;
+
+ if (ss->type != PORT_MN10300 &&
+ ss->type != PORT_MN10300_CTS)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * initialise the MN10300 on-chip UARTs
+ */
+static int __init mn10300_serial_init(void)
+{
+ struct mn10300_serial_port *port;
+ int ret, i;
+
+ printk(KERN_INFO "%s version %s (%s)\n",
+ serial_name, serial_version, serial_revdate);
+
+#ifdef CONFIG_MN10300_TTYSM2
+ SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */
+#endif
+
+ set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt);
+
+ ret = uart_register_driver(&mn10300_serial_driver);
+ if (!ret) {
+ for (i = 0 ; i < NR_PORTS ; i++) {
+ port = mn10300_serial_ports[i];
+ if (!port || port->gdbstub)
+ continue;
+
+ switch (port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ ret = uart_add_one_port(&mn10300_serial_driver,
+ &port->uart);
+
+ if (ret < 0) {
+ _debug("ERROR %d", -ret);
+ break;
+ }
+ }
+
+ if (ret)
+ uart_unregister_driver(&mn10300_serial_driver);
+ }
+
+ return ret;
+}
+
+__initcall(mn10300_serial_init);
+
+
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+
+/*
+ * print a string to the serial port without disturbing the real user of the
+ * port too much
+ * - the console must be locked by the caller
+ */
+static void mn10300_serial_console_write(struct console *co,
+ const char *s, unsigned count)
+{
+ struct mn10300_serial_port *port;
+ unsigned i;
+ u16 scxctr, txicr, tmp;
+ u8 tmxmd;
+
+ port = mn10300_serial_ports[co->index];
+
+ /* firstly hijack the serial port from the "virtual DMA" controller */
+ txicr = *port->tx_icr;
+ *port->tx_icr = GxICR_LEVEL_1;
+ tmp = *port->tx_icr;
+
+ /* the transmitter may be disabled */
+ scxctr = *port->_control;
+ if (!(scxctr & SC01CTR_TXE)) {
+ /* restart the UART clock */
+ tmxmd = *port->_tmxmd;
+
+ switch (port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxmd = TM8MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxmd = TM2MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+
+ /* enable the transmitter */
+ *port->_control = (scxctr & ~SC01CTR_BKE) | SC01CTR_TXE;
+
+ } else if (scxctr & SC01CTR_BKE) {
+ /* stop transmitting BREAK */
+ *port->_control = (scxctr & ~SC01CTR_BKE);
+ }
+
+ /* send the chars into the serial port (with LF -> LFCR conversion) */
+ for (i = 0; i < count; i++) {
+ char ch = *s++;
+
+ while (*port->_status & SC01STR_TBF)
+ continue;
+ *(u8 *) port->_txb = ch;
+
+ if (ch == 0x0a) {
+ while (*port->_status & SC01STR_TBF)
+ continue;
+ *(u8 *) port->_txb = 0xd;
+ }
+ }
+
+ /* can't let the transmitter be turned off if it's actually
+ * transmitting */
+ while (*port->_status & (SC01STR_TXF | SC01STR_TBF))
+ continue;
+
+ /* disable the transmitter if we re-enabled it */
+ if (!(scxctr & SC01CTR_TXE))
+ *port->_control = scxctr;
+
+ *port->tx_icr = txicr;
+ tmp = *port->tx_icr;
+}
+
+/*
+ * set up a serial port as a console
+ * - construct a cflag setting for the first rs_open()
+ * - initialize the serial port
+ * - return non-zero if we didn't find a serial port.
+ */
+static int __init mn10300_serial_console_setup(struct console *co,
+ char *options)
+{
+ struct mn10300_serial_port *port;
+ int i, parity = 'n', baud = 9600, bits = 8, flow = 0;
+
+ for (i = 0 ; i < NR_PORTS ; i++) {
+ port = mn10300_serial_ports[i];
+ if (port && !port->gdbstub && port->uart.line == co->index)
+ goto found_device;
+ }
+
+ return -ENODEV;
+
+found_device:
+ switch (port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&port->uart, co, baud, parity, bits, flow);
+}
+
+/*
+ * register console
+ */
+static int __init mn10300_serial_console_init(void)
+{
+ register_console(&mn10300_serial_console);
+ return 0;
+}
+
+console_initcall(mn10300_serial_console_init);
+#endif
diff --git a/arch/mn10300/kernel/mn10300-serial.h b/arch/mn10300/kernel/mn10300-serial.h
new file mode 100644
index 000000000000..6796499bf789
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-serial.h
@@ -0,0 +1,126 @@
+/* MN10300 On-chip serial port driver definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _MN10300_SERIAL_H
+#define _MN10300_SERIAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/serial_core.h>
+#include <linux/termios.h>
+#endif
+
+#include <asm/page.h>
+#include <asm/serial-regs.h>
+
+#define NR_PORTS 3 /* should be set 3 or 9 or 16 */
+
+#define MNSC_BUFFER_SIZE +(PAGE_SIZE / 2)
+
+/* intr_flags bits */
+#define MNSCx_RX_AVAIL 0x01
+#define MNSCx_RX_OVERF 0x02
+#define MNSCx_TX_SPACE 0x04
+#define MNSCx_TX_EMPTY 0x08
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_serial_port {
+ char *rx_buffer; /* reception buffer base */
+ unsigned rx_inp; /* pointer to rx input offset */
+ unsigned rx_outp; /* pointer to rx output offset */
+ u8 tx_xchar; /* high-priority XON/XOFF buffer */
+ u8 tx_break; /* transmit break request */
+ u8 intr_flags; /* interrupt flags */
+ volatile u16 *rx_icr; /* Rx interrupt control register */
+ volatile u16 *tx_icr; /* Tx interrupt control register */
+ int rx_irq; /* reception IRQ */
+ int tx_irq; /* transmission IRQ */
+ int tm_irq; /* timer IRQ */
+
+ const char *name; /* name of serial port */
+ const char *rx_name; /* Rx interrupt handler name of serial port */
+ const char *tx_name; /* Tx interrupt handler name of serial port */
+ const char *tm_name; /* Timer interrupt handler name */
+ unsigned short type; /* type of serial port */
+ unsigned char isconsole; /* T if it's a console */
+ volatile void *_iobase; /* pointer to base of I/O control regs */
+ volatile u16 *_control; /* control register pointer */
+ volatile u8 *_status; /* status register pointer */
+ volatile u8 *_intr; /* interrupt register pointer */
+ volatile void *_rxb; /* receive buffer register pointer */
+ volatile void *_txb; /* transmit buffer register pointer */
+ volatile u16 *_tmicr; /* timer interrupt control register */
+ volatile u8 *_tmxmd; /* baud rate timer mode register */
+ volatile u16 *_tmxbr; /* baud rate timer base register */
+
+ /* this must come down here so that assembly can use BSET to access the
+ * above fields */
+ struct uart_port uart;
+
+ unsigned short rx_brk; /* current break reception status */
+ u16 tx_cts; /* current CTS status */
+ int gdbstub; /* preemptively stolen by GDB stub */
+
+ u8 clock_src; /* clock source */
+#define MNSCx_CLOCK_SRC_IOCLK 0
+#define MNSCx_CLOCK_SRC_IOBCLK 1
+
+ u8 div_timer; /* timer used as divisor */
+#define MNSCx_DIV_TIMER_16BIT 0
+#define MNSCx_DIV_TIMER_8BIT 1
+
+ u16 options; /* options */
+#define MNSCx_OPT_CTS 0x0001
+
+ unsigned long ioclk; /* base clock rate */
+};
+
+#ifdef CONFIG_MN10300_TTYSM0
+extern struct mn10300_serial_port mn10300_serial_port_sif0;
+#endif
+
+#ifdef CONFIG_MN10300_TTYSM1
+extern struct mn10300_serial_port mn10300_serial_port_sif1;
+#endif
+
+#ifdef CONFIG_MN10300_TTYSM2
+extern struct mn10300_serial_port mn10300_serial_port_sif2;
+#endif
+
+extern struct mn10300_serial_port *mn10300_serial_ports[];
+
+struct mn10300_serial_int {
+ struct mn10300_serial_port *port;
+ asmlinkage void (*vdma)(void);
+};
+
+extern struct mn10300_serial_int mn10300_serial_int_tbl[];
+
+extern asmlinkage void mn10300_serial_vdma_interrupt(void);
+extern asmlinkage void mn10300_serial_vdma_rx_handler(void);
+extern asmlinkage void mn10300_serial_vdma_tx_handler(void);
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+#define SCgSTR SC0STR
+#define SCgRXB SC0RXB
+#define SCgRXIRQ SC0RXIRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+#define SCgSTR SC1STR
+#define SCgRXB SC1RXB
+#define SCgRXIRQ SC1RXIRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM2)
+#define SCgSTR SC2STR
+#define SCgRXB SC2RXB
+#define SCgRXIRQ SC2RXIRQ
+#endif
+
+#endif /* _MN10300_SERIAL_H */
diff --git a/arch/mn10300/kernel/mn10300-watchdog-low.S b/arch/mn10300/kernel/mn10300-watchdog-low.S
new file mode 100644
index 000000000000..996244745cca
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-watchdog-low.S
@@ -0,0 +1,59 @@
+###############################################################################
+#
+# MN10300 Watchdog interrupt handler
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/intctl-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/frame.inc>
+
+ .text
+
+###############################################################################
+#
+# Watchdog handler entry point
+# - special non-maskable interrupt
+#
+###############################################################################
+ .globl watchdog_handler
+ .type watchdog_handler,@function
+watchdog_handler:
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ mov fp,d0
+ lsr 2,d1
+ call watchdog_interrupt[],0 # watchdog_interrupt(regs,irq)
+
+ jmp ret_from_intr
+
+ .size watchdog_handler,.-watchdog_handler
+
+###############################################################################
+#
+# Watchdog touch entry point
+# - kept to absolute minimum (unfortunately, it's prototyped in linux/nmi.h so
+# we can't inline it)
+#
+###############################################################################
+ .globl touch_nmi_watchdog
+ .type touch_nmi_watchdog,@function
+touch_nmi_watchdog:
+ clr d0
+ mov d0,(watchdog_alert_counter)
+ ret [],0
+
+ .size touch_nmi_watchdog,.-touch_nmi_watchdog
diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c
new file mode 100644
index 000000000000..10811e981d20
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-watchdog.c
@@ -0,0 +1,183 @@
+/* MN10300 Watchdog timer
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/nmi.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/nmi.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <asm/div64.h>
+#include <asm/smp.h>
+#include <asm/gdb-stub.h>
+#include <asm/proc/clock.h>
+
+static DEFINE_SPINLOCK(watchdog_print_lock);
+static unsigned int watchdog;
+static unsigned int watchdog_hz = 1;
+unsigned int watchdog_alert_counter;
+
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check its timer makes IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs dont listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up
+ * here too!]
+ */
+static unsigned int last_irq_sums[NR_CPUS];
+
+int __init check_watchdog(void)
+{
+ irq_cpustat_t tmp[1];
+
+ printk(KERN_INFO "Testing Watchdog... ");
+
+ memcpy(tmp, irq_stat, sizeof(tmp));
+ local_irq_enable();
+ mdelay((10 * 1000) / watchdog_hz); /* wait 10 ticks */
+ local_irq_disable();
+
+ if (nmi_count(0) - tmp[0].__nmi_count <= 5) {
+ printk(KERN_WARNING "CPU#%d: Watchdog appears to be stuck!\n",
+ 0);
+ return -1;
+ }
+
+ printk(KERN_INFO "OK.\n");
+
+ /* now that we know it works we can reduce NMI frequency to
+ * something more reasonable; makes a difference in some configs
+ */
+ watchdog_hz = 1;
+
+ return 0;
+}
+
+static int __init setup_watchdog(char *str)
+{
+ unsigned tmp;
+ int opt;
+ u8 ctr;
+
+ get_option(&str, &opt);
+ if (opt != 1)
+ return 0;
+
+ watchdog = opt;
+ if (watchdog) {
+ set_intr_stub(EXCEP_WDT, watchdog_handler);
+ ctr = WDCTR_WDCK_65536th;
+ WDCTR = WDCTR_WDRST | ctr;
+ WDCTR = ctr;
+ tmp = WDCTR;
+
+ tmp = __muldiv64u(1 << (16 + ctr * 2), 1000000, MN10300_WDCLK);
+ tmp = 1000000000 / tmp;
+ watchdog_hz = (tmp + 500) / 1000;
+ }
+
+ return 1;
+}
+
+__setup("watchdog=", setup_watchdog);
+
+void __init watchdog_go(void)
+{
+ u8 wdt;
+
+ if (watchdog) {
+ printk(KERN_INFO "Watchdog: running at %uHz\n", watchdog_hz);
+ wdt = WDCTR & ~WDCTR_WDCNE;
+ WDCTR = wdt | WDCTR_WDRST;
+ wdt = WDCTR;
+ WDCTR = wdt | WDCTR_WDCNE;
+ wdt = WDCTR;
+
+ check_watchdog();
+ }
+}
+
+asmlinkage
+void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
+{
+
+ /*
+ * Since current-> is always on the stack, and we always switch
+ * the stack NMI-atomically, it's safe to use smp_processor_id().
+ */
+ int sum, cpu = smp_processor_id();
+ u8 wdt, tmp;
+
+ wdt = WDCTR & ~WDCTR_WDCNE;
+ WDCTR = wdt;
+ tmp = WDCTR;
+ NMICR = NMICR_WDIF;
+
+ nmi_count(cpu)++;
+ kstat_this_cpu.irqs[NMIIRQ]++;
+ sum = irq_stat[cpu].__irq_count;
+
+ if (last_irq_sums[cpu] == sum) {
+ /*
+ * Ayiee, looks like this CPU is stuck ...
+ * wait a few IRQs (5 seconds) before doing the oops ...
+ */
+ watchdog_alert_counter++;
+ if (watchdog_alert_counter == 5 * watchdog_hz) {
+ spin_lock(&watchdog_print_lock);
+ /*
+ * We are in trouble anyway, lets at least try
+ * to get a message out.
+ */
+ bust_spinlocks(1);
+ printk(KERN_ERR
+ "NMI Watchdog detected LOCKUP on CPU%d,"
+ " pc %08lx, registers:\n",
+ cpu, regs->pc);
+ show_registers(regs);
+ printk("console shuts up ...\n");
+ console_silent();
+ spin_unlock(&watchdog_print_lock);
+ bust_spinlocks(0);
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_busy)
+ gdbstub_exception(regs, excep);
+ else
+ gdbstub_intercept(regs, excep);
+#endif
+ do_exit(SIGSEGV);
+ }
+ } else {
+ last_irq_sums[cpu] = sum;
+ watchdog_alert_counter = 0;
+ }
+
+ WDCTR = wdt | WDCTR_WDRST;
+ tmp = WDCTR;
+ WDCTR = wdt | WDCTR_WDCNE;
+ tmp = WDCTR;
+}
diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c
new file mode 100644
index 000000000000..6d19628634e3
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300_ksyms.c
@@ -0,0 +1,37 @@
+/* MN10300 Miscellaneous and library kernel exports
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+
+EXPORT_SYMBOL(change_bit);
+EXPORT_SYMBOL(test_and_change_bit);
+
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memset);
+
+EXPORT_SYMBOL(strncpy_from_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__generic_copy_from_user);
+EXPORT_SYMBOL(__generic_copy_to_user);
+EXPORT_SYMBOL(strnlen_user);
+
+extern u64 __ashrdi3(u64, unsigned);
+extern u64 __ashldi3(u64, unsigned);
+extern u64 __lshrdi3(u64, unsigned);
+extern s64 __negdi2(s64);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__negdi2);
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
new file mode 100644
index 000000000000..0e4d2f6fa6e8
--- /dev/null
+++ b/arch/mn10300/kernel/module.c
@@ -0,0 +1,206 @@
+/* MN10300 Kernel module helper routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * - Derived from arch/i386/kernel/module.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt, ...)
+#endif
+
+/*
+ * allocate storage for a module
+ */
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc_exec(size);
+}
+
+/*
+ * free memory returned from module_alloc()
+ */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ * table entries. */
+}
+
+/*
+ * allow the arch to fix up the section table
+ * - we don't need anything special
+ */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+static uint32_t reloc_get16(uint8_t *p)
+{
+ return p[0] | (p[1] << 8);
+}
+
+static uint32_t reloc_get24(uint8_t *p)
+{
+ return reloc_get16(p) | (p[2] << 16);
+}
+
+static uint32_t reloc_get32(uint8_t *p)
+{
+ return reloc_get16(p) | (reloc_get16(p+2) << 16);
+}
+
+static void reloc_put16(uint8_t *p, uint32_t val)
+{
+ p[0] = val & 0xff;
+ p[1] = (val >> 8) & 0xff;
+}
+
+static void reloc_put24(uint8_t *p, uint32_t val)
+{
+ reloc_put16(p, val);
+ p[2] = (val >> 16) & 0xff;
+}
+
+static void reloc_put32(uint8_t *p, uint32_t val)
+{
+ reloc_put16(p, val);
+ reloc_put16(p+2, val >> 16);
+}
+
+/*
+ * apply a REL relocation
+ */
+int apply_relocate(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ printk(KERN_ERR "module %s: RELOCATION unsupported\n",
+ me->name);
+ return -ENOEXEC;
+}
+
+/*
+ * apply a RELA relocation
+ */
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ Elf32_Addr relocation;
+ uint8_t *location;
+ uint32_t value;
+
+ DEBUGP("Applying relocate section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* this is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+
+ /* this is the symbol the relocation is referring to (note that
+ * all undefined symbols have been resolved by the caller) */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+
+ /* this is the adjustment to be made */
+ relocation = sym->st_value + rel[i].r_addend;
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+ /* for the first four relocation types, we add the
+ * adjustment into the value at the location given */
+ case R_MN10300_32:
+ value = reloc_get32(location);
+ value += relocation;
+ reloc_put32(location, value);
+ break;
+ case R_MN10300_24:
+ value = reloc_get24(location);
+ value += relocation;
+ reloc_put24(location, value);
+ break;
+ case R_MN10300_16:
+ value = reloc_get16(location);
+ value += relocation;
+ reloc_put16(location, value);
+ break;
+ case R_MN10300_8:
+ *location += relocation;
+ break;
+
+ /* for the next three relocation types, we write the
+ * adjustment with the address subtracted over the
+ * value at the location given */
+ case R_MN10300_PCREL32:
+ value = relocation - (uint32_t) location;
+ reloc_put32(location, value);
+ break;
+ case R_MN10300_PCREL16:
+ value = relocation - (uint32_t) location;
+ reloc_put16(location, value);
+ break;
+ case R_MN10300_PCREL8:
+ *location = relocation - (uint32_t) location;
+ break;
+
+ default:
+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+/*
+ * finish loading the module
+ */
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ return 0;
+}
+
+/*
+ * finish clearing the module
+ */
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
new file mode 100644
index 000000000000..3b0d579fc15d
--- /dev/null
+++ b/arch/mn10300/kernel/process.c
@@ -0,0 +1,297 @@
+/* MN10300 Process handling code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/percpu.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/fpu.h>
+#include <asm/reset-regs.h>
+#include <asm/gdb-stub.h>
+#include "internal.h"
+
+/*
+ * power management idle function, if any..
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+/*
+ * return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ return ((unsigned long *) tsk->thread.sp)[3];
+}
+
+/*
+ * power off function, if any
+ */
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * we use this if we don't have any better idle routine
+ */
+static void default_idle(void)
+{
+ local_irq_disable();
+ if (!need_resched())
+ safe_halt();
+ else
+ local_irq_enable();
+}
+
+/*
+ * the idle thread
+ * - there's no useful work to be done, so just try to conserve power and have
+ * a low exit latency (ie sit in a loop waiting for somebody to say that
+ * they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+ int cpu = smp_processor_id();
+
+ /* endless idle loop with no priority at all */
+ for (;;) {
+ while (!need_resched()) {
+ void (*idle)(void);
+
+ smp_rmb();
+ idle = pm_idle;
+ if (!idle)
+ idle = default_idle;
+
+ irq_stat[cpu].idle_timestamp = jiffies;
+ idle();
+ }
+
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+void release_segments(struct mm_struct *mm)
+{
+}
+
+void machine_restart(char *cmd)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+
+#ifdef mn10300_unit_hard_reset
+ mn10300_unit_hard_reset();
+#else
+ mn10300_proc_hard_reset();
+#endif
+}
+
+void machine_halt(void)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+}
+
+void machine_power_off(void)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+}
+
+void show_regs(struct pt_regs *regs)
+{
+}
+
+/*
+ * create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(&regs, 0, sizeof(regs));
+
+ regs.a2 = (unsigned long) fn;
+ regs.d2 = (unsigned long) arg;
+ regs.pc = (unsigned long) kernel_thread_helper;
+ local_save_flags(regs.epsw);
+ regs.epsw |= EPSW_IE | EPSW_IM_7;
+
+ /* Ok, create the new process.. */
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0,
+ NULL, NULL);
+}
+
+/*
+ * free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+ exit_fpu();
+}
+
+void flush_thread(void)
+{
+ flush_fpu();
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+/*
+ * we do not have to muck with descriptors here, that is
+ * done in switch_mm() as needed.
+ */
+void copy_segments(struct task_struct *p, struct mm_struct *new_mm)
+{
+}
+
+/*
+ * this gets called before we allocate a new thread and copy the current task
+ * into it so that we can store lazy state into memory
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+ unlazy_fpu(tsk);
+}
+
+/*
+ * set up the kernel stack for a new thread and copy arch-specific thread
+ * control information
+ */
+int copy_thread(int nr, unsigned long clone_flags,
+ unsigned long c_usp, unsigned long ustk_size,
+ struct task_struct *p, struct pt_regs *kregs)
+{
+ struct pt_regs *c_uregs, *c_kregs, *uregs;
+ unsigned long c_ksp;
+
+ uregs = current->thread.uregs;
+
+ c_ksp = (unsigned long) task_stack_page(p) + THREAD_SIZE;
+
+ /* allocate the userspace exception frame and set it up */
+ c_ksp -= sizeof(struct pt_regs);
+ c_uregs = (struct pt_regs *) c_ksp;
+
+ p->thread.uregs = c_uregs;
+ *c_uregs = *uregs;
+ c_uregs->sp = c_usp;
+ c_uregs->epsw &= ~EPSW_FE; /* my FPU */
+
+ c_ksp -= 12; /* allocate function call ABI slack */
+
+ /* the new TLS pointer is passed in as arg #5 to sys_clone() */
+ if (clone_flags & CLONE_SETTLS)
+ c_uregs->e2 = __frame->d3;
+
+ /* set up the return kernel frame if called from kernel_thread() */
+ c_kregs = c_uregs;
+ if (kregs != uregs) {
+ c_ksp -= sizeof(struct pt_regs);
+ c_kregs = (struct pt_regs *) c_ksp;
+ *c_kregs = *kregs;
+ c_kregs->sp = c_usp;
+ c_kregs->next = c_uregs;
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ c_kregs->e2 = (unsigned long) p; /* current */
+#endif
+
+ c_ksp -= 12; /* allocate function call ABI slack */
+ }
+
+ /* set up things up so the scheduler can start the new task */
+ p->thread.__frame = c_kregs;
+ p->thread.a3 = (unsigned long) c_kregs;
+ p->thread.sp = c_ksp;
+ p->thread.pc = (unsigned long) ret_from_fork;
+ p->thread.wchan = (unsigned long) ret_from_fork;
+ p->thread.usp = c_usp;
+
+ return 0;
+}
+
+/*
+ * clone a process
+ * - tlsptr is retrieved by copy_thread() from __frame->d3
+ */
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+ int __user *parent_tidptr, int __user *child_tidptr,
+ int __user *tlsptr)
+{
+ return do_fork(clone_flags, newsp ?: __frame->sp, __frame, 0,
+ parent_tidptr, child_tidptr);
+}
+
+asmlinkage long sys_fork(void)
+{
+ return do_fork(SIGCHLD, __frame->sp, __frame, 0, NULL, NULL);
+}
+
+asmlinkage long sys_vfork(void)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, __frame->sp, __frame,
+ 0, NULL, NULL);
+}
+
+asmlinkage long sys_execve(char __user *name,
+ char __user * __user *argv,
+ char __user * __user *envp)
+{
+ char *filename;
+ int error;
+
+ lock_kernel();
+
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (!IS_ERR(filename)) {
+ error = do_execve(filename, argv, envp, __frame);
+ if (error == 0)
+ current->ptrace &= ~PT_DTRACE;
+
+ putname(filename);
+ }
+
+ unlock_kernel();
+ return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ return p->thread.wchan;
+}
diff --git a/arch/mn10300/kernel/profile-low.S b/arch/mn10300/kernel/profile-low.S
new file mode 100644
index 000000000000..94ffac12d02d
--- /dev/null
+++ b/arch/mn10300/kernel/profile-low.S
@@ -0,0 +1,72 @@
+###############################################################################
+#
+# Fast profiling interrupt handler
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/timer-regs.h>
+
+#define pi break
+
+ .balign 4
+counter:
+ .long -1
+
+###############################################################################
+#
+# Profiling interrupt entry point
+# - intended to run at interrupt priority 1
+#
+###############################################################################
+ENTRY(profile_handler)
+ movm [d2,d3,a2],(sp)
+
+ # ignore userspace
+ mov (12,sp),d2
+ and EPSW_nSL,d2
+ bne out
+
+ # do nothing if there's no buffer
+ mov (prof_buffer),a2
+ and a2,a2
+ beq out
+ or 0x20000000,a2
+
+ # calculate relative position in text segment
+ mov (16,sp),d2
+ sub _stext,d2
+ mov (prof_shift),d3
+ lsr d3,d2
+ mov (prof_len),d3
+ cmp d3,d2
+ bcc outside_text
+
+ # increment the appropriate profile bucket
+do_inc:
+ asl2 d2
+ mov (a2,d2),d3
+ inc d3
+ mov d3,(a2,d2)
+out:
+ mov GxICR_DETECT,d2
+ movbu d2,(TM11ICR) # ACK the interrupt
+ movbu (TM11ICR),d2
+ movm (sp),[d2,d3,a2]
+ rti
+
+outside_text:
+ sub 1,d3
+ mov d3,d2
+ bra do_inc
diff --git a/arch/mn10300/kernel/profile.c b/arch/mn10300/kernel/profile.c
new file mode 100644
index 000000000000..20d7d0306b16
--- /dev/null
+++ b/arch/mn10300/kernel/profile.c
@@ -0,0 +1,51 @@
+/* MN10300 Profiling setup
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * initialise the profiling if enabled
+ * - using with gdbstub will give anomalous results
+ * - can't be used with gdbstub if running at IRQ priority 0
+ */
+static __init int profile_init(void)
+{
+ u16 tmp;
+
+ if (!prof_buffer)
+ return 0;
+
+ /* use timer 11 to drive the profiling interrupts */
+ set_intr_stub(EXCEP_IRQ_LEVEL0, profile_handler);
+
+ /* set IRQ priority at which to run */
+ set_intr_level(TM11IRQ, GxICR_LEVEL_0);
+
+ /* set up timer 11
+ * - source: (IOCLK 33MHz)*2 = 66MHz
+ * - frequency: (33330000*2) / 8 / 20625 = 202Hz
+ */
+ TM11BR = 20625 - 1;
+ TM11MD = TM8MD_SRC_IOCLK_8;
+ TM11MD |= TM8MD_INIT_COUNTER;
+ TM11MD &= ~TM8MD_INIT_COUNTER;
+ TM11MD |= TM8MD_COUNT_ENABLE;
+
+ TM11ICR |= GxICR_ENABLE;
+ tmp = TM11ICR;
+
+ printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n",
+ mn10300_ioclk / 8 / (TM11BR + 1));
+ printk(KERN_INFO "Profile histogram stored %p-%p\n",
+ prof_buffer, (u8 *)(prof_buffer + prof_len) - 1);
+
+ return 0;
+}
+
+__initcall(profile_init);
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
new file mode 100644
index 000000000000..d6d6cdc75c52
--- /dev/null
+++ b/arch/mn10300/kernel/ptrace.c
@@ -0,0 +1,379 @@
+/* MN10300 Process tracing
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/fpu.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * translate ptrace register IDs into struct pt_regs offsets
+ */
+static const u8 ptrace_regid_to_frame[] = {
+ [PT_A3 << 2] = REG_A3,
+ [PT_A2 << 2] = REG_A2,
+ [PT_D3 << 2] = REG_D3,
+ [PT_D2 << 2] = REG_D2,
+ [PT_MCVF << 2] = REG_MCVF,
+ [PT_MCRL << 2] = REG_MCRL,
+ [PT_MCRH << 2] = REG_MCRH,
+ [PT_MDRQ << 2] = REG_MDRQ,
+ [PT_E1 << 2] = REG_E1,
+ [PT_E0 << 2] = REG_E0,
+ [PT_E7 << 2] = REG_E7,
+ [PT_E6 << 2] = REG_E6,
+ [PT_E5 << 2] = REG_E5,
+ [PT_E4 << 2] = REG_E4,
+ [PT_E3 << 2] = REG_E3,
+ [PT_E2 << 2] = REG_E2,
+ [PT_SP << 2] = REG_SP,
+ [PT_LAR << 2] = REG_LAR,
+ [PT_LIR << 2] = REG_LIR,
+ [PT_MDR << 2] = REG_MDR,
+ [PT_A1 << 2] = REG_A1,
+ [PT_A0 << 2] = REG_A0,
+ [PT_D1 << 2] = REG_D1,
+ [PT_D0 << 2] = REG_D0,
+ [PT_ORIG_D0 << 2] = REG_ORIG_D0,
+ [PT_EPSW << 2] = REG_EPSW,
+ [PT_PC << 2] = REG_PC,
+};
+
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+ return *(unsigned long *)
+ ((unsigned long) task->thread.uregs + offset);
+}
+
+/*
+ * this routine will put a word on the processes privileged stack.
+ * the offset is how far from the base addr as stored in the TSS.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline
+int put_stack_long(struct task_struct *task, int offset, unsigned long data)
+{
+ unsigned long stack;
+
+ stack = (unsigned long) task->thread.uregs + offset;
+ *(unsigned long *) stack = data;
+ return 0;
+}
+
+static inline unsigned long get_fpregs(struct fpu_state_struct *buf,
+ struct task_struct *tsk)
+{
+ return __copy_to_user(buf, &tsk->thread.fpu_state,
+ sizeof(struct fpu_state_struct));
+}
+
+static inline unsigned long set_fpregs(struct task_struct *tsk,
+ struct fpu_state_struct *buf)
+{
+ return __copy_from_user(&tsk->thread.fpu_state, buf,
+ sizeof(struct fpu_state_struct));
+}
+
+static inline void fpsave_init(struct task_struct *task)
+{
+ memset(&task->thread.fpu_state, 0, sizeof(struct fpu_state_struct));
+}
+
+/*
+ * make sure the single step bit is not set
+ */
+void ptrace_disable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+ struct user *dummy = NULL;
+ long tmp;
+
+ tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+ tmp &= ~EPSW_T;
+ put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * set the single step bit
+ */
+void ptrace_enable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+ struct user *dummy = NULL;
+ long tmp;
+
+ tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+ tmp |= EPSW_T;
+ put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * handle the arch-specific side of process tracing
+ */
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ struct fpu_state_struct fpu_state;
+ int i, ret;
+
+ switch (request) {
+ /* read the word at location addr. */
+ case PTRACE_PEEKTEXT: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* read the word at location addr. */
+ case PTRACE_PEEKDATA: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR: {
+ unsigned long tmp;
+
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 ||
+ addr > sizeof(struct user) - 3)
+ break;
+
+ tmp = 0; /* Default return condition */
+ if (addr < NR_PTREGS << 2)
+ tmp = get_stack_long(child,
+ ptrace_regid_to_frame[addr]);
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* write the word at location addr. */
+ case PTRACE_POKETEXT:
+ case PTRACE_POKEDATA:
+ if (access_process_vm(child, addr, &data, sizeof(data), 1) ==
+ sizeof(data))
+ ret = 0;
+ else
+ ret = -EIO;
+ break;
+
+ /* write the word at location addr in the USER area */
+ case PTRACE_POKEUSR:
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 ||
+ addr > sizeof(struct user) - 3)
+ break;
+
+ ret = 0;
+ if (addr < NR_PTREGS << 2)
+ ret = put_stack_long(child, ptrace_regid_to_frame[addr],
+ data);
+ break;
+
+ /* continue and stop at next (return from) syscall */
+ case PTRACE_SYSCALL:
+ /* restart after signal. */
+ case PTRACE_CONT:
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ child->exit_code = data;
+ ptrace_disable(child);
+ wake_up_process(child);
+ ret = 0;
+ break;
+
+ /*
+ * make the child exit
+ * - the best I can do is send it a sigkill
+ * - perhaps it should be put in the status that it wants to
+ * exit
+ */
+ case PTRACE_KILL:
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+ ptrace_disable(child);
+ wake_up_process(child);
+ break;
+
+ case PTRACE_SINGLESTEP: /* set the trap flag. */
+#ifndef CONFIG_MN10300_USING_JTAG
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ ptrace_enable(child);
+ child->exit_code = data;
+ wake_up_process(child);
+ ret = 0;
+#else
+ ret = -EINVAL;
+#endif
+ break;
+
+ case PTRACE_DETACH: /* detach a process that was attached. */
+ ret = ptrace_detach(child, data);
+ break;
+
+ /* Get all gp regs from the child. */
+ case PTRACE_GETREGS: {
+ unsigned long tmp;
+
+ if (!access_ok(VERIFY_WRITE, (unsigned *) data, NR_PTREGS << 2)) {
+ ret = -EIO;
+ break;
+ }
+
+ for (i = 0; i < NR_PTREGS << 2; i += 4) {
+ tmp = get_stack_long(child, ptrace_regid_to_frame[i]);
+ __put_user(tmp, (unsigned long *) data);
+ data += sizeof(tmp);
+ }
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+ unsigned long tmp;
+
+ if (!access_ok(VERIFY_READ, (unsigned long *)data,
+ sizeof(struct pt_regs))) {
+ ret = -EIO;
+ break;
+ }
+
+ for (i = 0; i < NR_PTREGS << 2; i += 4) {
+ __get_user(tmp, (unsigned long *) data);
+ put_stack_long(child, ptrace_regid_to_frame[i], tmp);
+ data += sizeof(tmp);
+ }
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_GETFPREGS: { /* Get the child FPU state. */
+ if (is_using_fpu(child)) {
+ unlazy_fpu(child);
+ fpu_state = child->thread.fpu_state;
+ } else {
+ memset(&fpu_state, 0, sizeof(fpu_state));
+ }
+
+ ret = -EIO;
+ if (copy_to_user((void *) data, &fpu_state,
+ sizeof(fpu_state)) == 0)
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_SETFPREGS: { /* Set the child FPU state. */
+ ret = -EFAULT;
+ if (copy_from_user(&fpu_state, (const void *) data,
+ sizeof(fpu_state)) == 0) {
+ fpu_kill_state(child);
+ child->thread.fpu_state = fpu_state;
+ set_using_fpu(child);
+ ret = 0;
+ }
+ break;
+ }
+
+ case PTRACE_SETOPTIONS: {
+ if (data & PTRACE_O_TRACESYSGOOD)
+ child->ptrace |= PT_TRACESYSGOOD;
+ else
+ child->ptrace &= ~PT_TRACESYSGOOD;
+ ret = 0;
+ break;
+ }
+
+ default:
+ ret = -EIO;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+#if 0
+ /* just in case... */
+ printk(KERN_DEBUG "[%d] syscall_%lu(%lx,%lx,%lx,%lx) = %lx\n",
+ current->pid,
+ regs->orig_d0,
+ regs->a0,
+ regs->d1,
+ regs->a3,
+ regs->a2,
+ regs->d0);
+ return;
+#endif
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
+ !test_thread_flag(TIF_SINGLESTEP))
+ return;
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP |
+ ((current->ptrace & PT_TRACESYSGOOD) &&
+ !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c
new file mode 100644
index 000000000000..042f792d8430
--- /dev/null
+++ b/arch/mn10300/kernel/rtc.c
@@ -0,0 +1,173 @@
+/* MN10300 RTC management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/timex.h>
+#include <asm/rtc-regs.h>
+#include <asm/rtc.h>
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+/* last time the RTC got updated */
+static long last_rtc_update;
+
+/* time for RTC to update itself in ioclks */
+static unsigned long mn10300_rtc_update_period;
+
+/*
+ * read the current RTC time
+ */
+unsigned long __init get_initial_rtc_time(void)
+{
+ struct rtc_time tm;
+
+ get_rtc_time(&tm);
+
+ return mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
+ * ms after the second nowtime has started, because when nowtime is written
+ * into the registers of the CMOS clock, it will jump to the next second
+ * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data
+ * sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+static int set_rtc_mmss(unsigned long nowtime)
+{
+ unsigned char save_control, save_freq_select;
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+
+ /* gets recalled with irq locally disabled */
+ spin_lock(&rtc_lock);
+ save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being
+ * set */
+ CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL);
+
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset
+ * prescaler */
+ CMOS_WRITE(save_freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
+
+ cmos_minutes = CMOS_READ(RTC_MINUTES);
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+ /* correct for half hour time zone */
+ real_minutes += 30;
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ }
+ CMOS_WRITE(real_seconds, RTC_SECONDS);
+ CMOS_WRITE(real_minutes, RTC_MINUTES);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ spin_unlock(&rtc_lock);
+
+ return retval;
+}
+
+void check_rtc_time(void)
+{
+ /* the RTC clock just finished ticking over again this second
+ * - if we have an externally synchronized Linux clock, then update
+ * RTC clock accordingly every ~11 minutes. set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+ if ((time_status & STA_UNSYNC) == 0 &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ xtime.tv_nsec / 1000 >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+ xtime.tv_nsec / 1000 <= 500000 + ((unsigned) TICK_SIZE) / 2
+ ) {
+ if (set_rtc_mmss(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ /* do it again in 60s */
+ last_rtc_update = xtime.tv_sec - 600;
+ }
+}
+
+/*
+ * calibrate the TSC clock against the RTC
+ */
+void __init calibrate_clock(void)
+{
+ unsigned long count0, counth, count1;
+ unsigned char status;
+
+ /* make sure the RTC is running and is set to operate in 24hr mode */
+ status = RTSRC;
+ RTCRB |= RTCRB_SET;
+ RTCRB |= RTCRB_TM_24HR;
+ RTCRA |= RTCRA_DVR;
+ RTCRA &= ~RTCRA_DVR;
+ RTCRB &= ~RTCRB_SET;
+
+ /* work out the clock speed by counting clock cycles between ends of
+ * the RTC update cycle - track the RTC through one complete update
+ * cycle (1 second)
+ */
+ startup_timestamp_counter();
+
+ while (!(RTCRA & RTCRA_UIP)) {}
+ while ((RTCRA & RTCRA_UIP)) {}
+
+ count0 = TMTSCBC;
+
+ while (!(RTCRA & RTCRA_UIP)) {}
+
+ counth = TMTSCBC;
+
+ while ((RTCRA & RTCRA_UIP)) {}
+
+ count1 = TMTSCBC;
+
+ shutdown_timestamp_counter();
+
+ MN10300_TSCCLK = count0 - count1; /* the timers count down */
+ mn10300_rtc_update_period = counth - count1;
+ MN10300_TSC_PER_HZ = MN10300_TSCCLK / HZ;
+}
diff --git a/arch/mn10300/kernel/semaphore.c b/arch/mn10300/kernel/semaphore.c
new file mode 100644
index 000000000000..9153c4039fd2
--- /dev/null
+++ b/arch/mn10300/kernel/semaphore.c
@@ -0,0 +1,149 @@
+/* MN10300 Semaphore implementation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <asm/semaphore.h>
+
+struct sem_waiter {
+ struct list_head list;
+ struct task_struct *task;
+};
+
+#if SEMAPHORE_DEBUG
+void semtrace(struct semaphore *sem, const char *str)
+{
+ if (sem->debug)
+ printk(KERN_DEBUG "[%d] %s({%d,%d})\n",
+ current->pid,
+ str,
+ atomic_read(&sem->count),
+ list_empty(&sem->wait_list) ? 0 : 1);
+}
+#else
+#define semtrace(SEM, STR) do { } while (0)
+#endif
+
+/*
+ * wait for a token to be granted from a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+void __down(struct semaphore *sem, unsigned long flags)
+{
+ struct task_struct *tsk = current;
+ struct sem_waiter waiter;
+
+ semtrace(sem, "Entering __down");
+
+ /* set up my own style of waitqueue */
+ waiter.task = tsk;
+ get_task_struct(tsk);
+
+ list_add_tail(&waiter.list, &sem->wait_list);
+
+ /* we don't need to touch the semaphore struct anymore */
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ /* wait to be given the semaphore */
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+
+ for (;;) {
+ if (!waiter.task)
+ break;
+ schedule();
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+ }
+
+ tsk->state = TASK_RUNNING;
+ semtrace(sem, "Leaving __down");
+}
+EXPORT_SYMBOL(__down);
+
+/*
+ * interruptibly wait for a token to be granted from a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+int __down_interruptible(struct semaphore *sem, unsigned long flags)
+{
+ struct task_struct *tsk = current;
+ struct sem_waiter waiter;
+ int ret;
+
+ semtrace(sem, "Entering __down_interruptible");
+
+ /* set up my own style of waitqueue */
+ waiter.task = tsk;
+ get_task_struct(tsk);
+
+ list_add_tail(&waiter.list, &sem->wait_list);
+
+ /* we don't need to touch the semaphore struct anymore */
+ set_task_state(tsk, TASK_INTERRUPTIBLE);
+
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ /* wait to be given the semaphore */
+ ret = 0;
+ for (;;) {
+ if (!waiter.task)
+ break;
+ if (unlikely(signal_pending(current)))
+ goto interrupted;
+ schedule();
+ set_task_state(tsk, TASK_INTERRUPTIBLE);
+ }
+
+ out:
+ tsk->state = TASK_RUNNING;
+ semtrace(sem, "Leaving __down_interruptible");
+ return ret;
+
+ interrupted:
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ list_del(&waiter.list);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ ret = 0;
+ if (!waiter.task) {
+ put_task_struct(current);
+ ret = -EINTR;
+ }
+ goto out;
+}
+EXPORT_SYMBOL(__down_interruptible);
+
+/*
+ * release a single token back to a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+void __up(struct semaphore *sem)
+{
+ struct task_struct *tsk;
+ struct sem_waiter *waiter;
+
+ semtrace(sem, "Entering __up");
+
+ /* grant the token to the process at the front of the queue */
+ waiter = list_entry(sem->wait_list.next, struct sem_waiter, list);
+
+ /* We must be careful not to touch 'waiter' after we set ->task = NULL.
+ * It is an allocated on the waiter's stack and may become invalid at
+ * any time after that point (due to a wakeup from another source).
+ */
+ list_del_init(&waiter->list);
+ tsk = waiter->task;
+ smp_mb();
+ waiter->task = NULL;
+ wake_up_process(tsk);
+ put_task_struct(tsk);
+
+ semtrace(sem, "Leaving __up");
+}
+EXPORT_SYMBOL(__up);
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
new file mode 100644
index 000000000000..6b7ce2636851
--- /dev/null
+++ b/arch/mn10300/kernel/setup.c
@@ -0,0 +1,298 @@
+/* MN10300 Arch-specific initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <linux/console.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/proc/proc.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/sections.h>
+
+struct mn10300_cpuinfo boot_cpu_data;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0x18000000;
+
+char redboot_command_line[COMMAND_LINE_SIZE] =
+ "console=ttyS0,115200 root=/dev/mtdblock3 rw";
+
+char __initdata redboot_platform_name[COMMAND_LINE_SIZE];
+
+static struct resource code_resource = {
+ .start = 0x100000,
+ .end = 0,
+ .name = "Kernel code",
+};
+
+static struct resource data_resource = {
+ .start = 0,
+ .end = 0,
+ .name = "Kernel data",
+};
+
+static unsigned long __initdata phys_memory_base;
+static unsigned long __initdata phys_memory_end;
+static unsigned long __initdata memory_end;
+unsigned long memory_size;
+
+struct thread_info *__current_ti = &init_thread_union.thread_info;
+struct task_struct *__current = &init_task;
+
+#define mn10300_known_cpus 3
+static const char *const mn10300_cputypes[] = {
+ "am33v1",
+ "am33v2",
+ "am34v1",
+ "unknown"
+};
+
+/*
+ *
+ */
+static void __init parse_mem_cmdline(char **cmdline_p)
+{
+ char *from, *to, c;
+
+ /* save unparsed command line copy for /proc/cmdline */
+ strcpy(boot_command_line, redboot_command_line);
+
+ /* see if there's an explicit memory size option */
+ from = redboot_command_line;
+ to = redboot_command_line;
+ c = ' ';
+
+ for (;;) {
+ if (c == ' ' && !memcmp(from, "mem=", 4)) {
+ if (to != redboot_command_line)
+ to--;
+ memory_size = memparse(from + 4, &from);
+ }
+
+ c = *(from++);
+ if (!c)
+ break;
+
+ *(to++) = c;
+ }
+
+ *to = '\0';
+ *cmdline_p = redboot_command_line;
+
+ if (memory_size == 0)
+ panic("Memory size not known\n");
+
+ memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS +
+ memory_size;
+ if (memory_end > phys_memory_end)
+ memory_end = phys_memory_end;
+}
+
+/*
+ * architecture specific setup
+ */
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long bootmap_size;
+ unsigned long kstart_pfn, start_pfn, free_pfn, end_pfn;
+
+ cpu_init();
+ unit_setup();
+ parse_mem_cmdline(cmdline_p);
+
+ init_mm.start_code = (unsigned long)&_text;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) &_end;
+
+ code_resource.start = virt_to_bus(&_text);
+ code_resource.end = virt_to_bus(&_etext)-1;
+ data_resource.start = virt_to_bus(&_etext);
+ data_resource.end = virt_to_bus(&_edata)-1;
+
+#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
+
+ start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
+ kstart_pfn = PFN_UP(__pa(&_text));
+ free_pfn = PFN_UP(__pa(&_end));
+ end_pfn = PFN_DOWN(__pa(memory_end));
+
+ bootmap_size = init_bootmem_node(&contig_page_data,
+ free_pfn,
+ start_pfn,
+ end_pfn);
+
+ if (kstart_pfn > start_pfn)
+ free_bootmem(PFN_PHYS(start_pfn),
+ PFN_PHYS(kstart_pfn - start_pfn));
+
+ free_bootmem(PFN_PHYS(free_pfn),
+ PFN_PHYS(end_pfn - free_pfn));
+
+ /* If interrupt vector table is in main ram, then we need to
+ reserve the page it is occupying. */
+ if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS &&
+ CONFIG_INTERRUPT_VECTOR_BASE < memory_end)
+ reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1,
+ BOOTMEM_DEFAULT);
+
+ reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size,
+ BOOTMEM_DEFAULT);
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+
+ paging_init();
+}
+
+/*
+ * perform CPU initialisation
+ */
+void __init cpu_init(void)
+{
+ unsigned long cpurev = CPUREV, type;
+ unsigned long base, size;
+
+ type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
+ if (type > mn10300_known_cpus)
+ type = mn10300_known_cpus;
+
+ printk(KERN_INFO "Matsushita %s, rev %ld\n",
+ mn10300_cputypes[type],
+ (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S);
+
+ /* determine the memory size and base from the memory controller regs */
+ memory_size = 0;
+
+ base = SDBASE(0);
+ if (base & SDBASE_CE) {
+ size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
+ size = ~size + 1;
+ base &= SDBASE_CBA;
+
+ printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base);
+ memory_size += size;
+ phys_memory_base = base;
+ }
+
+ base = SDBASE(1);
+ if (base & SDBASE_CE) {
+ size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
+ size = ~size + 1;
+ base &= SDBASE_CBA;
+
+ printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base);
+ memory_size += size;
+ if (phys_memory_base == 0)
+ phys_memory_base = base;
+ }
+
+ phys_memory_end = phys_memory_base + memory_size;
+
+#ifdef CONFIG_FPU
+ fpu_init_state();
+#endif
+}
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ unsigned long cpurev = CPUREV, type, icachesz, dcachesz;
+
+ type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
+ if (type > mn10300_known_cpus)
+ type = mn10300_known_cpus;
+
+ icachesz =
+ ((cpurev & CPUREV_ICWAY ) >> CPUREV_ICWAY_S) *
+ ((cpurev & CPUREV_ICSIZE) >> CPUREV_ICSIZE_S) *
+ 1024;
+
+ dcachesz =
+ ((cpurev & CPUREV_DCWAY ) >> CPUREV_DCWAY_S) *
+ ((cpurev & CPUREV_DCSIZE) >> CPUREV_DCSIZE_S) *
+ 1024;
+
+ seq_printf(m,
+ "processor : 0\n"
+ "vendor_id : Matsushita\n"
+ "cpu core : %s\n"
+ "cpu rev : %lu\n"
+ "model name : " PROCESSOR_MODEL_NAME "\n"
+ "icache size: %lu\n"
+ "dcache size: %lu\n",
+ mn10300_cputypes[type],
+ (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S,
+ icachesz,
+ dcachesz
+ );
+
+ seq_printf(m,
+ "ioclk speed: %lu.%02luMHz\n"
+ "bogomips : %lu.%02lu\n\n",
+ MN10300_IOCLK / 1000000,
+ (MN10300_IOCLK / 10000) % 100,
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100
+ );
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
diff --git a/arch/mn10300/kernel/sigframe.h b/arch/mn10300/kernel/sigframe.h
new file mode 100644
index 000000000000..0decba28ae84
--- /dev/null
+++ b/arch/mn10300/kernel/sigframe.h
@@ -0,0 +1,33 @@
+/* MN10300 Signal frame definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+struct sigframe
+{
+ void (*pretcode)(void);
+ int sig;
+ struct sigcontext *psc;
+ struct sigcontext sc;
+ struct fpucontext fpuctx;
+ unsigned long extramask[_NSIG_WORDS-1];
+ char retcode[8];
+};
+
+struct rt_sigframe
+{
+ void (*pretcode)(void);
+ int sig;
+ struct siginfo *pinfo;
+ void *puc;
+ struct siginfo info;
+ struct ucontext uc;
+ struct fpucontext fpuctx;
+ char retcode[8];
+};
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
new file mode 100644
index 000000000000..841ca9955a18
--- /dev/null
+++ b/arch/mn10300/kernel/signal.c
@@ -0,0 +1,564 @@
+/* MN10300 Signal handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/tty.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include "sigframe.h"
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+ mask &= _BLOCKABLE;
+ spin_lock_irq(&current->sighand->siglock);
+ current->saved_sigmask = current->blocked;
+ siginitset(&current->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
+}
+
+/*
+ * set signal action syscall
+ */
+asmlinkage long sys_sigaction(int sig,
+ const struct old_sigaction __user *act,
+ struct old_sigaction __user *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+/*
+ * set alternate signal stack syscall
+ */
+asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t *uoss)
+{
+ return do_sigaltstack(uss, uoss, __frame->sp);
+}
+
+/*
+ * do a signal return; undo the signal stack.
+ */
+static int restore_sigcontext(struct pt_regs *regs,
+ struct sigcontext __user *sc, long *_d0)
+{
+ unsigned int err = 0;
+
+ if (is_using_fpu(current))
+ fpu_kill_state(current);
+
+#define COPY(x) err |= __get_user(regs->x, &sc->x)
+ COPY(d1); COPY(d2); COPY(d3);
+ COPY(a0); COPY(a1); COPY(a2); COPY(a3);
+ COPY(e0); COPY(e1); COPY(e2); COPY(e3);
+ COPY(e4); COPY(e5); COPY(e6); COPY(e7);
+ COPY(lar); COPY(lir);
+ COPY(mdr); COPY(mdrq);
+ COPY(mcvf); COPY(mcrl); COPY(mcrh);
+ COPY(sp); COPY(pc);
+#undef COPY
+
+ {
+ unsigned int tmpflags;
+#ifndef CONFIG_MN10300_USING_JTAG
+#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
+ EPSW_T | EPSW_nAR)
+#else
+#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
+ EPSW_nAR)
+#endif
+ err |= __get_user(tmpflags, &sc->epsw);
+ regs->epsw = (regs->epsw & ~USER_EPSW) |
+ (tmpflags & USER_EPSW);
+ regs->orig_d0 = -1; /* disable syscall checks */
+ }
+
+ {
+ struct fpucontext *buf;
+ err |= __get_user(buf, &sc->fpucontext);
+ if (buf) {
+ if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
+ goto badframe;
+ err |= fpu_restore_sigcontext(buf);
+ }
+ }
+
+ err |= __get_user(*_d0, &sc->d0);
+ return err;
+
+badframe:
+ return 1;
+}
+
+/*
+ * standard signal return syscall
+ */
+asmlinkage long sys_sigreturn(void)
+{
+ struct sigframe __user *frame = (struct sigframe __user *) __frame->sp;
+ sigset_t set;
+ long d0;
+
+ if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__get_user(set.sig[0], &frame->sc.oldmask))
+ goto badframe;
+
+ if (_NSIG_WORDS > 1 &&
+ __copy_from_user(&set.sig[1], &frame->extramask,
+ sizeof(frame->extramask)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(__frame, &frame->sc, &d0))
+ goto badframe;
+
+ return d0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * realtime signal return syscall
+ */
+asmlinkage long sys_rt_sigreturn(void)
+{
+ struct rt_sigframe __user *frame =
+ (struct rt_sigframe __user *) __frame->sp;
+ sigset_t set;
+ unsigned long d0;
+
+ if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(__frame, &frame->uc.uc_mcontext, &d0))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, __frame->sp) == -EFAULT)
+ goto badframe;
+
+ return d0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * store the userspace context into a signal frame
+ */
+static int setup_sigcontext(struct sigcontext __user *sc,
+ struct fpucontext *fpuctx,
+ struct pt_regs *regs,
+ unsigned long mask)
+{
+ int tmp, err = 0;
+
+#define COPY(x) err |= __put_user(regs->x, &sc->x)
+ COPY(d0); COPY(d1); COPY(d2); COPY(d3);
+ COPY(a0); COPY(a1); COPY(a2); COPY(a3);
+ COPY(e0); COPY(e1); COPY(e2); COPY(e3);
+ COPY(e4); COPY(e5); COPY(e6); COPY(e7);
+ COPY(lar); COPY(lir);
+ COPY(mdr); COPY(mdrq);
+ COPY(mcvf); COPY(mcrl); COPY(mcrh);
+ COPY(sp); COPY(epsw); COPY(pc);
+#undef COPY
+
+ tmp = fpu_setup_sigcontext(fpuctx);
+ if (tmp < 0)
+ err = 1;
+ else
+ err |= __put_user(tmp ? fpuctx : NULL, &sc->fpucontext);
+
+ /* non-iBCS2 extensions.. */
+ err |= __put_user(mask, &sc->oldmask);
+
+ return err;
+}
+
+/*
+ * determine which stack to use..
+ */
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+ struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long sp;
+
+ /* default to using normal stack */
+ sp = regs->sp;
+
+ /* this is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (!on_sig_stack(sp))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ return (void __user *) ((sp - frame_size) & ~7UL);
+}
+
+/*
+ * set up a normal signal frame
+ */
+static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+ struct pt_regs *regs)
+{
+ struct sigframe __user *frame;
+ int rsig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ rsig = sig;
+ if (sig < 32 &&
+ current_thread_info()->exec_domain &&
+ current_thread_info()->exec_domain->signal_invmap)
+ rsig = current_thread_info()->exec_domain->signal_invmap[sig];
+
+ if (__put_user(rsig, &frame->sig) < 0 ||
+ __put_user(&frame->sc, &frame->psc) < 0)
+ goto give_sigsegv;
+
+ if (setup_sigcontext(&frame->sc, &frame->fpuctx, regs, set->sig[0]))
+ goto give_sigsegv;
+
+ if (_NSIG_WORDS > 1) {
+ if (__copy_to_user(frame->extramask, &set->sig[1],
+ sizeof(frame->extramask)))
+ goto give_sigsegv;
+ }
+
+ /* set up to return from userspace. If provided, use a stub already in
+ * userspace */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+ goto give_sigsegv;
+ } else {
+ if (__put_user((void (*)(void))frame->retcode,
+ &frame->pretcode))
+ goto give_sigsegv;
+ /* this is mov $,d0; syscall 0 */
+ if (__put_user(0x2c, (char *)(frame->retcode + 0)) ||
+ __put_user(__NR_sigreturn, (char *)(frame->retcode + 1)) ||
+ __put_user(0x00, (char *)(frame->retcode + 2)) ||
+ __put_user(0xf0, (char *)(frame->retcode + 3)) ||
+ __put_user(0xe0, (char *)(frame->retcode + 4)))
+ goto give_sigsegv;
+ flush_icache_range((unsigned long) frame->retcode,
+ (unsigned long) frame->retcode + 5);
+ }
+
+ /* set up registers for signal handler */
+ regs->sp = (unsigned long) frame;
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->d0 = sig;
+ regs->d1 = (unsigned long) &frame->sc;
+
+ set_fs(USER_DS);
+
+ /* the tracer may want to single-step inside the handler */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+ sig, current->comm, current->pid, frame, regs->pc,
+ frame->pretcode);
+#endif
+
+ return 0;
+
+give_sigsegv:
+ force_sig(SIGSEGV, current);
+ return -EFAULT;
+}
+
+/*
+ * set up a realtime signal frame
+ */
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame;
+ int rsig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ rsig = sig;
+ if (sig < 32 &&
+ current_thread_info()->exec_domain &&
+ current_thread_info()->exec_domain->signal_invmap)
+ rsig = current_thread_info()->exec_domain->signal_invmap[sig];
+
+ if (__put_user(rsig, &frame->sig) ||
+ __put_user(&frame->info, &frame->pinfo) ||
+ __put_user(&frame->uc, &frame->puc) ||
+ copy_siginfo_to_user(&frame->info, info))
+ goto give_sigsegv;
+
+ /* create the ucontext. */
+ if (__put_user(0, &frame->uc.uc_flags) ||
+ __put_user(0, &frame->uc.uc_link) ||
+ __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp) ||
+ __put_user(sas_ss_flags(regs->sp), &frame->uc.uc_stack.ss_flags) ||
+ __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size) ||
+ setup_sigcontext(&frame->uc.uc_mcontext,
+ &frame->fpuctx, regs, set->sig[0]) ||
+ __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)))
+ goto give_sigsegv;
+
+ /* set up to return from userspace. If provided, use a stub already in
+ * userspace */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+ goto give_sigsegv;
+ } else {
+ if (__put_user((void(*)(void))frame->retcode,
+ &frame->pretcode) ||
+ /* This is mov $,d0; syscall 0 */
+ __put_user(0x2c, (char *)(frame->retcode + 0)) ||
+ __put_user(__NR_rt_sigreturn,
+ (char *)(frame->retcode + 1)) ||
+ __put_user(0x00, (char *)(frame->retcode + 2)) ||
+ __put_user(0xf0, (char *)(frame->retcode + 3)) ||
+ __put_user(0xe0, (char *)(frame->retcode + 4)))
+ goto give_sigsegv;
+
+ flush_icache_range((u_long) frame->retcode,
+ (u_long) frame->retcode + 5);
+ }
+
+ /* Set up registers for signal handler */
+ regs->sp = (unsigned long) frame;
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->d0 = sig;
+ regs->d1 = (long) &frame->info;
+
+ set_fs(USER_DS);
+
+ /* the tracer may want to single-step inside the handler */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+ sig, current->comm, current->pid, frame, regs->pc,
+ frame->pretcode);
+#endif
+
+ return 0;
+
+give_sigsegv:
+ force_sig(SIGSEGV, current);
+ return -EFAULT;
+}
+
+/*
+ * handle the actual delivery of a signal to userspace
+ */
+static int handle_signal(int sig,
+ siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs *regs)
+{
+ int ret;
+
+ /* Are we from a system call? */
+ if (regs->orig_d0 >= 0) {
+ /* If so, check system call restarting.. */
+ switch (regs->d0) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->d0 = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->d0 = -EINTR;
+ break;
+ }
+
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ regs->d0 = regs->orig_d0;
+ regs->pc -= 2;
+ }
+ }
+
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ ret = setup_frame(sig, ka, oldset, regs);
+
+ if (ret == 0) {
+ spin_lock_irq(&current->sighand->siglock);
+ sigorsets(&current->blocked, &current->blocked,
+ &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(&current->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+ }
+
+ return ret;
+}
+
+/*
+ * handle a potential signal
+ */
+static void do_signal(struct pt_regs *regs)
+{
+ struct k_sigaction ka;
+ siginfo_t info;
+ sigset_t *oldset;
+ int signr;
+
+ /* we want the common case to go fast, which is why we may in certain
+ * cases get here from kernel mode */
+ if (!user_mode(regs))
+ return;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = &current->saved_sigmask;
+ else
+ oldset = &current->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+
+ return;
+ }
+
+ /* did we come from a system call? */
+ if (regs->orig_d0 >= 0) {
+ /* restart the system call - no handlers present */
+ switch (regs->d0) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ regs->d0 = regs->orig_d0;
+ regs->pc -= 2;
+ break;
+
+ case -ERESTART_RESTARTBLOCK:
+ regs->d0 = __NR_restart_syscall;
+ regs->pc -= 2;
+ break;
+ }
+ }
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by current->work.notify_resume
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
+{
+ /* Pending single-step? */
+ if (thread_info_flags & _TIF_SINGLESTEP) {
+#ifndef CONFIG_MN10300_USING_JTAG
+ regs->epsw |= EPSW_T;
+ clear_thread_flag(TIF_SINGLESTEP);
+#else
+ BUG(); /* no h/w single-step if using JTAG unit */
+#endif
+ }
+
+ /* deal with pending signal delivery */
+ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ do_signal(regs);
+}
diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S
new file mode 100644
index 000000000000..630aad71b946
--- /dev/null
+++ b/arch/mn10300/kernel/switch_to.S
@@ -0,0 +1,71 @@
+###############################################################################
+#
+# MN10300 Context switch operation
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/cpu-regs.h>
+
+ .text
+
+###############################################################################
+#
+# struct task_struct *__switch_to(struct thread_struct *prev,
+# struct thread_struct *next,
+# struct task_struct *prev_task)
+#
+###############################################################################
+ENTRY(__switch_to)
+ movm [d2,d3,a2,a3,exreg1],(sp)
+ or EPSW_NMID,epsw
+
+ mov (44,sp),d2
+
+ mov d0,a0
+ mov d1,a1
+
+ # save prev context
+ mov (__frame),d0
+ mov d0,(THREAD_FRAME,a0)
+ mov __switch_back,d0
+ mov d0,(THREAD_PC,a0)
+ mov sp,a2
+ mov a2,(THREAD_SP,a0)
+ mov a3,(THREAD_A3,a0)
+
+ mov (THREAD_A3,a1),a3
+ mov (THREAD_SP,a1),a2
+
+ # switch
+ mov a2,sp
+
+ # load next context
+ GET_THREAD_INFO a2
+ mov a2,(__current_ti)
+ mov (TI_task,a2),a2
+ mov a2,(__current)
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov a2,e2
+#endif
+
+ mov (THREAD_FRAME,a1),a2
+ mov a2,(__frame)
+ mov (THREAD_PC,a1),a2
+ mov d2,d0 # for ret_from_fork
+ mov d0,a0 # for __switch_to
+
+ jmp (a2)
+
+__switch_back:
+ and ~EPSW_NMID,epsw
+ ret [d2,d3,a2,a3,exreg1],32
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
new file mode 100644
index 000000000000..5f17a1ebc825
--- /dev/null
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -0,0 +1,193 @@
+/* MN10300 Weird system calls
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/syscalls.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/syscalls.h>
+#include <linux/tty.h>
+
+#include <asm/uaccess.h>
+
+#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage long sys_pipe(unsigned long __user *fildes)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, 2 * sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+/*
+ * memory mapping syscall
+ */
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ struct file *file = NULL;
+ long error = -EINVAL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+
+ if (flags & MAP_FIXED && addr < MIN_MAP_ADDR)
+ goto out;
+
+ error = -EBADF;
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(&current->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(&current->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return error;
+}
+
+asmlinkage long old_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long offset)
+{
+ if (offset & ~PAGE_MASK)
+ return -EINVAL;
+ return sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+}
+
+struct sel_arg_struct {
+ unsigned long n;
+ fd_set *inp;
+ fd_set *outp;
+ fd_set *exp;
+ struct timeval *tvp;
+};
+
+asmlinkage int old_select(struct sel_arg_struct __user *arg)
+{
+ struct sel_arg_struct a;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ return -EFAULT;
+ /* sys_select() does the appropriate kernel locking */
+ return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage long sys_ipc(uint call, int first, int second,
+ int third, void __user *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ switch (call) {
+ case SEMOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr,
+ second, NULL);
+ case SEMTIMEDOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr,
+ second,
+ (const struct timespec __user *)fifth);
+ case SEMGET:
+ return sys_semget(first, second, third);
+ case SEMCTL: {
+ union semun fourth;
+ if (!ptr)
+ return -EINVAL;
+ if (get_user(fourth.__pad, (void __user * __user *) ptr))
+ return -EFAULT;
+ return sys_semctl(first, second, third, fourth);
+ }
+
+ case MSGSND:
+ return sys_msgsnd(first, (struct msgbuf __user *) ptr,
+ second, third);
+ case MSGRCV:
+ switch (version) {
+ case 0: {
+ struct ipc_kludge tmp;
+ if (!ptr)
+ return -EINVAL;
+
+ if (copy_from_user(&tmp,
+ (struct ipc_kludge __user *) ptr,
+ sizeof(tmp)))
+ return -EFAULT;
+ return sys_msgrcv(first, tmp.msgp, second,
+ tmp.msgtyp, third);
+ }
+ default:
+ return sys_msgrcv(first,
+ (struct msgbuf __user *) ptr,
+ second, fifth, third);
+ }
+ case MSGGET:
+ return sys_msgget((key_t) first, second);
+ case MSGCTL:
+ return sys_msgctl(first, second,
+ (struct msqid_ds __user *) ptr);
+
+ case SHMAT:
+ switch (version) {
+ default: {
+ ulong raddr;
+ ret = do_shmat(first, (char __user *) ptr, second,
+ &raddr);
+ if (ret)
+ return ret;
+ return put_user(raddr, (ulong *) third);
+ }
+ case 1: /* iBCS2 emulator entry point */
+ if (!segment_eq(get_fs(), get_ds()))
+ return -EINVAL;
+ return do_shmat(first, (char __user *) ptr, second,
+ (ulong *) third);
+ }
+ case SHMDT:
+ return sys_shmdt((char __user *)ptr);
+ case SHMGET:
+ return sys_shmget(first, second, third);
+ case SHMCTL:
+ return sys_shmctl(first, second,
+ (struct shmid_ds __user *) ptr);
+ default:
+ return -EINVAL;
+ }
+}
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
new file mode 100644
index 000000000000..ff492e3b3457
--- /dev/null
+++ b/arch/mn10300/kernel/time.c
@@ -0,0 +1,129 @@
+/* MN10300 Low level time management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/time.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/profile.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc.h>
+
+#ifdef CONFIG_MN10300_RTC
+unsigned long mn10300_ioclk; /* system I/O clock frequency */
+unsigned long mn10300_iobclk; /* system I/O clock frequency */
+unsigned long mn10300_tsc_per_HZ; /* number of ioclks per jiffy */
+#endif /* CONFIG_MN10300_RTC */
+
+static unsigned long mn10300_last_tsc; /* time-stamp counter at last time
+ * interrupt occurred */
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static struct irqaction timer_irq = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
+ .mask = CPU_MASK_NONE,
+ .name = "timer",
+};
+
+/*
+ * scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ union {
+ unsigned long long l;
+ u32 w[2];
+ } quot;
+
+ quot.w[0] = mn10300_last_tsc - get_cycles();
+ quot.w[1] = 1000000000;
+
+ asm("mulu %2,%3,%0,%1"
+ : "=r"(quot.w[1]), "=r"(quot.w[0])
+ : "0"(quot.w[1]), "1"(quot.w[0])
+ : "cc");
+
+ do_div(quot.l, MN10300_TSCCLK);
+
+ return quot.l;
+}
+
+/*
+ * advance the kernel's time keeping clocks (xtime and jiffies)
+ * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time
+ * there's a need to update
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ unsigned tsc, elapse;
+
+ write_seqlock(&xtime_lock);
+
+ while (tsc = get_cycles(),
+ elapse = mn10300_last_tsc - tsc, /* time elapsed since last
+ * tick */
+ elapse > MN10300_TSC_PER_HZ
+ ) {
+ mn10300_last_tsc -= MN10300_TSC_PER_HZ;
+
+ /* advance the kernel's time tracking system */
+ profile_tick(CPU_PROFILING);
+ do_timer(1);
+ update_process_times(user_mode(get_irq_regs()));
+ check_rtc_time();
+ }
+
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * initialise the various timers used by the main part of the kernel
+ */
+void __init time_init(void)
+{
+ /* we need the prescalar running to be able to use IOCLK/8
+ * - IOCLK runs at 1/4 (ST5 open) or 1/8 (ST5 closed) internal CPU clock
+ * - IOCLK runs at Fosc rate (crystal speed)
+ */
+ TMPSCNT |= TMPSCNT_ENABLE;
+
+ startup_timestamp_counter();
+
+ printk(KERN_INFO
+ "timestamp counter I/O clock running at %lu.%02lu"
+ " (calibrated against RTC)\n",
+ MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100);
+
+ xtime.tv_sec = get_initial_rtc_time();
+ xtime.tv_nsec = 0;
+
+ mn10300_last_tsc = TMTSCBC;
+
+ /* use timer 0 & 1 cascaded to tick at as close to HZ as possible */
+ setup_irq(TMJCIRQ, &timer_irq);
+
+ set_intr_level(TMJCIRQ, TMJCICR_LEVEL);
+
+ startup_jiffies_counter();
+
+#ifdef CONFIG_MN10300_WD_TIMER
+ /* start the watchdog timer */
+ watchdog_go();
+#endif
+}
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
new file mode 100644
index 000000000000..8b9dc6d9dcc6
--- /dev/null
+++ b/arch/mn10300/kernel/traps.c
@@ -0,0 +1,619 @@
+/* MN10300 Exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/pci.h>
+#include <linux/kdebug.h>
+#include <linux/bug.h>
+#include <linux/irq.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/sections.h>
+
+#if (CONFIG_INTERRUPT_VECTOR_BASE & 0xffffff)
+#error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!"
+#endif
+
+struct pt_regs *__frame; /* current frame pointer */
+EXPORT_SYMBOL(__frame);
+
+int kstack_depth_to_print = 24;
+
+spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock);
+
+ATOMIC_NOTIFIER_HEAD(mn10300_die_chain);
+
+/*
+ * These constants are for searching for possible module text
+ * segments. MODULE_RANGE is a guess of how much space is likely
+ * to be vmalloced.
+ */
+#define MODULE_RANGE (8 * 1024 * 1024)
+
+#define DO_ERROR(signr, prologue, str, name) \
+asmlinkage void name(struct pt_regs *regs, u32 intcode) \
+{ \
+ prologue; \
+ if (die_if_no_fixup(str, regs, intcode)) \
+ return; \
+ force_sig(signr, current); \
+}
+
+#define DO_EINFO(signr, prologue, str, name, sicode) \
+asmlinkage void name(struct pt_regs *regs, u32 intcode) \
+{ \
+ siginfo_t info; \
+ prologue; \
+ if (die_if_no_fixup(str, regs, intcode)) \
+ return; \
+ info.si_signo = signr; \
+ if (signr == SIGILL && sicode == ILL_ILLOPC) { \
+ uint8_t opcode; \
+ if (get_user(opcode, (uint8_t __user *)regs->pc) == 0) \
+ if (opcode == 0xff) \
+ info.si_signo = SIGTRAP; \
+ } \
+ info.si_errno = 0; \
+ info.si_code = sicode; \
+ info.si_addr = (void *) regs->pc; \
+ force_sig_info(info.si_signo, &info, current); \
+}
+
+DO_ERROR(SIGTRAP, {}, "trap", trap);
+DO_ERROR(SIGSEGV, {}, "ibreak", ibreak);
+DO_ERROR(SIGSEGV, {}, "obreak", obreak);
+DO_EINFO(SIGSEGV, {}, "access error", access_error, SEGV_ACCERR);
+DO_EINFO(SIGSEGV, {}, "insn access error", insn_acc_error, SEGV_ACCERR);
+DO_EINFO(SIGSEGV, {}, "data access error", data_acc_error, SEGV_ACCERR);
+DO_EINFO(SIGILL, {}, "privileged opcode", priv_op, ILL_PRVOPC);
+DO_EINFO(SIGILL, {}, "invalid opcode", invalid_op, ILL_ILLOPC);
+DO_EINFO(SIGILL, {}, "invalid ex opcode", invalid_exop, ILL_ILLOPC);
+DO_EINFO(SIGBUS, {}, "invalid address", mem_error, BUS_ADRERR);
+DO_EINFO(SIGBUS, {}, "bus error", bus_error, BUS_ADRERR);
+DO_EINFO(SIGILL, {}, "FPU invalid opcode", fpu_invalid_op, ILL_COPROC);
+
+DO_ERROR(SIGTRAP,
+#ifndef CONFIG_MN10300_USING_JTAG
+ DCR &= ~0x0001,
+#else
+ {},
+#endif
+ "single step", istep);
+
+/*
+ * handle NMI
+ */
+asmlinkage void nmi(struct pt_regs *regs, enum exception_code code)
+{
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return;
+#endif
+
+ printk(KERN_WARNING "--- Register Dump ---\n");
+ show_registers(regs);
+ printk(KERN_WARNING "---------------------\n");
+}
+
+/*
+ * show a stack trace from the specified stack pointer
+ */
+void show_trace(unsigned long *sp)
+{
+ unsigned long *stack, addr, module_start, module_end;
+ int i;
+
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Call Trace:");
+
+ stack = sp;
+ i = 0;
+ module_start = VMALLOC_START;
+ module_end = VMALLOC_END;
+
+ while (((long) stack & (THREAD_SIZE - 1)) != 0) {
+ addr = *stack++;
+ if (__kernel_text_address(addr)) {
+#if 1
+ printk(" [<%08lx>]", addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+#else
+ if ((i % 6) == 0)
+ printk("\n" KERN_EMERG " ");
+ printk("[<%08lx>] ", addr);
+ i++;
+#endif
+ }
+ }
+
+ printk("\n");
+}
+
+/*
+ * show the raw stack from the specified stack pointer
+ */
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+ unsigned long *stack;
+ int i;
+
+ if (!sp)
+ sp = (unsigned long *) &sp;
+
+ stack = sp;
+ printk(KERN_EMERG "Stack:");
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (((long) stack & (THREAD_SIZE - 1)) == 0)
+ break;
+ if ((i % 8) == 0)
+ printk("\n" KERN_EMERG " ");
+ printk("%08lx ", *stack++);
+ }
+
+ show_trace(sp);
+}
+
+/*
+ * the architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+ unsigned long stack;
+
+ show_stack(current, &stack);
+}
+EXPORT_SYMBOL(dump_stack);
+
+/*
+ * dump the register file in the specified exception frame
+ */
+void show_registers_only(struct pt_regs *regs)
+{
+ unsigned long ssp;
+
+ ssp = (unsigned long) regs + sizeof(*regs);
+
+ printk(KERN_EMERG "PC: %08lx EPSW: %08lx SSP: %08lx mode: %s\n",
+ regs->pc, regs->epsw, ssp, user_mode(regs) ? "User" : "Super");
+ printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
+ regs->d0, regs->d1, regs->d2, regs->d3);
+ printk(KERN_EMERG "a0: %08lx a1: %08lx a2: %08lx a3: %08lx\n",
+ regs->a0, regs->a1, regs->a2, regs->a3);
+ printk(KERN_EMERG "e0: %08lx e1: %08lx e2: %08lx e3: %08lx\n",
+ regs->e0, regs->e1, regs->e2, regs->e3);
+ printk(KERN_EMERG "e4: %08lx e5: %08lx e6: %08lx e7: %08lx\n",
+ regs->e4, regs->e5, regs->e6, regs->e7);
+ printk(KERN_EMERG "lar: %08lx lir: %08lx mdr: %08lx usp: %08lx\n",
+ regs->lar, regs->lir, regs->mdr, regs->sp);
+ printk(KERN_EMERG "cvf: %08lx crl: %08lx crh: %08lx drq: %08lx\n",
+ regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq);
+ printk(KERN_EMERG "threadinfo=%p task=%p)\n",
+ current_thread_info(), current);
+
+ if ((unsigned long) current >= 0x90000000UL &&
+ (unsigned long) current < 0x94000000UL)
+ printk(KERN_EMERG "Process %s (pid: %d)\n",
+ current->comm, current->pid);
+
+ printk(KERN_EMERG "CPUP: %04hx\n", CPUP);
+ printk(KERN_EMERG "TBR: %08x\n", TBR);
+ printk(KERN_EMERG "DEAR: %08x\n", DEAR);
+ printk(KERN_EMERG "sISR: %08x\n", sISR);
+ printk(KERN_EMERG "NMICR: %04hx\n", NMICR);
+ printk(KERN_EMERG "BCBERR: %08x\n", BCBERR);
+ printk(KERN_EMERG "BCBEAR: %08x\n", BCBEAR);
+ printk(KERN_EMERG "MMUFCR: %08x\n", MMUFCR);
+ printk(KERN_EMERG "IPTEU : %08x IPTEL2: %08x\n", IPTEU, IPTEL2);
+ printk(KERN_EMERG "DPTEU: %08x DPTEL2: %08x\n", DPTEU, DPTEL2);
+}
+
+/*
+ * dump the registers and the stack
+ */
+void show_registers(struct pt_regs *regs)
+{
+ unsigned long sp;
+ int i;
+
+ show_registers_only(regs);
+
+ if (!user_mode(regs))
+ sp = (unsigned long) regs + sizeof(*regs);
+ else
+ sp = regs->sp;
+
+ /* when in-kernel, we also print out the stack and code at the
+ * time of the fault..
+ */
+ if (!user_mode(regs)) {
+ printk(KERN_EMERG "\n");
+ show_stack(current, (unsigned long *) sp);
+
+#if 0
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Code: ");
+ if (regs->pc < PAGE_OFFSET)
+ goto bad;
+
+ for (i = 0; i < 20; i++) {
+ unsigned char c;
+ if (__get_user(c, &((unsigned char *) regs->pc)[i]))
+ goto bad;
+ printk("%02x ", c);
+ }
+#else
+ i = 0;
+#endif
+ }
+
+ printk("\n");
+ return;
+
+#if 0
+bad:
+ printk(KERN_EMERG " Bad PC value.");
+ break;
+#endif
+}
+
+/*
+ *
+ */
+void show_trace_task(struct task_struct *tsk)
+{
+ unsigned long sp = tsk->thread.sp;
+
+ /* User space on another CPU? */
+ if ((sp ^ (unsigned long) tsk) & (PAGE_MASK << 1))
+ return;
+
+ show_trace((unsigned long *) sp);
+}
+
+/*
+ * note the untimely death of part of the kernel
+ */
+void die(const char *str, struct pt_regs *regs, enum exception_code code)
+{
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "%s: %04x\n",
+ str, code & 0xffff);
+ show_registers(regs);
+
+ if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
+ (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
+ printk(KERN_EMERG "Exception in usermode interrupt handler\n");
+ printk(KERN_EMERG "\n"
+ KERN_EMERG " Please connect to kernel debugger !!\n");
+ asm volatile ("0: bra 0b");
+ }
+
+ spin_unlock_irq(&die_lock);
+ do_exit(SIGSEGV);
+}
+
+/*
+ * see if there's a fixup handler we can force a jump to when an exception
+ * happens due to something kernel code did
+ */
+int die_if_no_fixup(const char *str, struct pt_regs *regs,
+ enum exception_code code)
+{
+ if (user_mode(regs))
+ return 0;
+
+ peripheral_leds_display_exception(code);
+
+ switch (code) {
+ /* see if we can fixup the kernel accessing memory */
+ case EXCEP_ITLBMISS:
+ case EXCEP_DTLBMISS:
+ case EXCEP_IAERROR:
+ case EXCEP_DAERROR:
+ case EXCEP_MEMERR:
+ case EXCEP_MISALIGN:
+ case EXCEP_BUSERROR:
+ case EXCEP_ILLDATACC:
+ case EXCEP_IOINSACC:
+ case EXCEP_PRIVINSACC:
+ case EXCEP_PRIVDATACC:
+ case EXCEP_DATINSACC:
+ if (fixup_exception(regs))
+ return 1;
+ case EXCEP_UNIMPINS:
+ if (regs->pc && *(uint8_t *)regs->pc == 0xff)
+ if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
+ return 1;
+ break;
+ default:
+ break;
+ }
+
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return 1;
+#endif
+
+ if (notify_die(DIE_GPF, str, regs, code, 0, 0))
+ return 1;
+
+ /* make the process die as the last resort */
+ die(str, regs, code);
+}
+
+/*
+ * handle unsupported syscall instructions (syscall 1-15)
+ */
+static asmlinkage void unsupported_syscall(struct pt_regs *regs,
+ enum exception_code code)
+{
+ struct task_struct *tsk = current;
+ siginfo_t info;
+
+ /* catch a kernel BUG() */
+ if (code == EXCEP_SYSCALL15 && !user_mode(regs)) {
+ if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_BUG) {
+#ifdef CONFIG_GDBSTUB
+ __gdbstub_bug_trap();
+#endif
+ }
+ }
+
+ regs->pc -= 2; /* syscall return addr is _after_ the instruction */
+
+ die_if_no_fixup("An unsupported syscall insn was used by the kernel\n",
+ regs, code);
+
+ info.si_signo = SIGILL;
+ info.si_errno = ENOSYS;
+ info.si_code = ILL_ILLTRP;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGILL, &info, tsk);
+}
+
+/*
+ * display the register file when the stack pointer gets clobbered
+ */
+asmlinkage void do_double_fault(struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+
+ strcpy(tsk->comm, "emergency tsk");
+ tsk->pid = 0;
+ console_verbose();
+ printk(KERN_EMERG "--- double fault ---\n");
+ show_registers(regs);
+}
+
+/*
+ * asynchronous bus error (external, usually I/O DMA)
+ */
+asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs)
+{
+ console_verbose();
+
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Asynchronous I/O Bus Error\n"
+ KERN_EMERG "==========================\n");
+
+ if (bcberr & BCBERR_BEME)
+ printk(KERN_EMERG "- Multiple recorded errors\n");
+
+ printk(KERN_EMERG "- Faulting Buses:%s%s%s\n",
+ bcberr & BCBERR_BEMR_CI ? " CPU-Ins-Fetch" : "",
+ bcberr & BCBERR_BEMR_CD ? " CPU-Data" : "",
+ bcberr & BCBERR_BEMR_DMA ? " DMA" : "");
+
+ printk(KERN_EMERG "- %s %s access made to %s at address %08x\n",
+ bcberr & BCBERR_BEBST ? "Burst" : "Single",
+ bcberr & BCBERR_BERW ? "Read" : "Write",
+ bcberr & BCBERR_BESB_MON ? "Monitor Space" :
+ bcberr & BCBERR_BESB_IO ? "Internal CPU I/O Space" :
+ bcberr & BCBERR_BESB_EX ? "External I/O Bus" :
+ bcberr & BCBERR_BESB_OPEX ? "External Memory Bus" :
+ "On Chip Memory",
+ bcbear
+ );
+
+ printk(KERN_EMERG "- Detected by the %s\n",
+ bcberr&BCBERR_BESD ? "Bus Control Unit" : "Slave Bus");
+
+#ifdef CONFIG_PCI
+#define BRIDGEREGB(X) (*(volatile __u8 *)(0xBE040000 + (X)))
+#define BRIDGEREGW(X) (*(volatile __u16 *)(0xBE040000 + (X)))
+#define BRIDGEREGL(X) (*(volatile __u32 *)(0xBE040000 + (X)))
+
+ printk(KERN_EMERG "- PCI Memory Paging Reg: %08x\n",
+ *(volatile __u32 *) (0xBFFFFFF4));
+ printk(KERN_EMERG "- PCI Bridge Base Address 0: %08x\n",
+ BRIDGEREGL(PCI_BASE_ADDRESS_0));
+ printk(KERN_EMERG "- PCI Bridge AMPCI Base Address: %08x\n",
+ BRIDGEREGL(0x48));
+ printk(KERN_EMERG "- PCI Bridge Command: %04hx\n",
+ BRIDGEREGW(PCI_COMMAND));
+ printk(KERN_EMERG "- PCI Bridge Status: %04hx\n",
+ BRIDGEREGW(PCI_STATUS));
+ printk(KERN_EMERG "- PCI Bridge Int Status: %08hx\n",
+ BRIDGEREGL(0x4c));
+#endif
+
+ printk(KERN_EMERG "\n");
+ show_registers(regs);
+
+ panic("Halted due to asynchronous I/O Bus Error\n");
+}
+
+/*
+ * handle an exception for which a handler has not yet been installed
+ */
+asmlinkage void uninitialised_exception(struct pt_regs *regs,
+ enum exception_code code)
+{
+
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return;
+#endif
+
+ peripheral_leds_display_exception(code);
+ printk(KERN_EMERG "Uninitialised Exception 0x%04x\n", code & 0xFFFF);
+ show_registers(regs);
+
+ for (;;)
+ continue;
+}
+
+/*
+ * set an interrupt stub to jump to a handler
+ * ! NOTE: this does *not* flush the caches
+ */
+void __init __set_intr_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - (unsigned long) vector;
+ vector[0] = 0xdc; /* JMP handler */
+ vector[1] = addr;
+ vector[2] = addr >> 8;
+ vector[3] = addr >> 16;
+ vector[4] = addr >> 24;
+ vector[5] = 0xcb;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+}
+
+/*
+ * set an interrupt stub to jump to a handler
+ */
+void __init set_intr_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - (unsigned long) vector;
+ vector[0] = 0xdc; /* JMP handler */
+ vector[1] = addr;
+ vector[2] = addr >> 8;
+ vector[3] = addr >> 16;
+ vector[4] = addr >> 24;
+ vector[5] = 0xcb;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+
+ mn10300_dcache_flush_inv();
+ mn10300_icache_inv();
+}
+
+/*
+ * set an interrupt stub to invoke the JTAG unit and then jump to a handler
+ */
+void __init set_jtag_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - ((unsigned long) vector + 1);
+ vector[0] = 0xff; /* PI to jump into JTAG debugger */
+ vector[1] = 0xdc; /* jmp handler */
+ vector[2] = addr;
+ vector[3] = addr >> 8;
+ vector[4] = addr >> 16;
+ vector[5] = addr >> 24;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+
+ mn10300_dcache_flush_inv();
+ flush_icache_range((unsigned long) vector, (unsigned long) vector + 8);
+}
+
+/*
+ * initialise the exception table
+ */
+void __init trap_init(void)
+{
+ set_excp_vector(EXCEP_TRAP, trap);
+ set_excp_vector(EXCEP_ISTEP, istep);
+ set_excp_vector(EXCEP_IBREAK, ibreak);
+ set_excp_vector(EXCEP_OBREAK, obreak);
+
+ set_excp_vector(EXCEP_PRIVINS, priv_op);
+ set_excp_vector(EXCEP_UNIMPINS, invalid_op);
+ set_excp_vector(EXCEP_UNIMPEXINS, invalid_exop);
+ set_excp_vector(EXCEP_MEMERR, mem_error);
+ set_excp_vector(EXCEP_MISALIGN, misalignment);
+ set_excp_vector(EXCEP_BUSERROR, bus_error);
+ set_excp_vector(EXCEP_ILLINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_ILLDATACC, data_acc_error);
+ set_excp_vector(EXCEP_IOINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_PRIVINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_PRIVDATACC, data_acc_error);
+ set_excp_vector(EXCEP_DATINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_FPU_DISABLED, fpu_disabled);
+ set_excp_vector(EXCEP_FPU_UNIMPINS, fpu_invalid_op);
+ set_excp_vector(EXCEP_FPU_OPERATION, fpu_exception);
+
+ set_excp_vector(EXCEP_NMI, nmi);
+
+ set_excp_vector(EXCEP_SYSCALL1, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL2, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL3, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL4, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL5, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL6, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL7, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL8, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL9, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL10, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL11, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL12, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL13, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL14, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL15, unsupported_syscall);
+}
+
+/*
+ * determine if a program counter value is a valid bug address
+ */
+int is_valid_bugaddr(unsigned long pc)
+{
+ return pc >= PAGE_OFFSET;
+}
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..a3e80f444f55
--- /dev/null
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -0,0 +1,159 @@
+/* MN10300 Main kernel linker script
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#define __VMLINUX_LDS__
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+
+OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
+OUTPUT_ARCH(mn10300)
+ENTRY(_start)
+jiffies = jiffies_64;
+#ifndef CONFIG_MN10300_CURRENT_IN_E2
+current = __current;
+#endif
+SECTIONS
+{
+ . = CONFIG_KERNEL_TEXT_ADDRESS;
+ /* read-only */
+ _stext = .;
+ _text = .; /* Text and read-only data */
+ .text : {
+ *(
+ .text.head
+ .text
+ )
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ } = 0xcb
+
+ _etext = .; /* End of text section */
+
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ BUG_TABLE
+
+ RODATA
+
+ /* writeable */
+ .data : { /* Data */
+ DATA_DATA
+ CONSTRUCTORS
+ }
+
+ . = ALIGN(4096);
+ __nosave_begin = .;
+ .data_nosave : { *(.data.nosave) }
+ . = ALIGN(4096);
+ __nosave_end = .;
+
+ . = ALIGN(4096);
+ .data.page_aligned : { *(.data.idt) }
+
+ . = ALIGN(32);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ /* rarely changed data like cpu maps */
+ . = ALIGN(32);
+ .data.read_mostly : AT(ADDR(.data.read_mostly)) {
+ *(.data.read_mostly)
+ _edata = .; /* End of data section */
+ }
+
+ . = ALIGN(THREAD_SIZE); /* init_task */
+ .data.init_task : { *(.data.init_task) }
+
+ /* might get freed after init */
+ . = ALIGN(4096);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ }
+
+ /* will be freed after init */
+ . = ALIGN(4096); /* Init code and data */
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ .init.data : { *(.init.data) }
+ . = ALIGN(16);
+ __setup_start = .;
+ .setup.init : { KEEP(*(.init.setup)) }
+ __setup_end = .;
+
+ __initcall_start = .;
+ .initcall.init : {
+ INITCALLS
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
+
+ SECURITY_INIT
+ . = ALIGN(4);
+ __alt_instructions = .;
+ .altinstructions : { *(.altinstructions) }
+ __alt_instructions_end = .;
+ .altinstr_replacement : { *(.altinstr_replacement) }
+ /* .exit.text is discard at runtime, not link time, to deal with references
+ from .altinstructions and .eh_frame */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(4096);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
+#endif
+
+ . = ALIGN(32);
+ __per_cpu_start = .;
+ .data.percpu : { *(.data.percpu) }
+ __per_cpu_end = .;
+ . = ALIGN(4096);
+ __init_end = .;
+ /* freed after init ends here */
+
+ __bss_start = .; /* BSS */
+ .bss : {
+ *(.bss.page_aligned)
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_stop = .;
+
+ _end = . ;
+
+ /* This is where the kernel creates the early boot page tables */
+ . = ALIGN(4096);
+ pg0 = .;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ }
+
+ STABS_DEBUG
+
+ DWARF_DEBUG
+}
diff --git a/arch/mn10300/lib/Makefile b/arch/mn10300/lib/Makefile
new file mode 100644
index 000000000000..fdfa9ec5b5bb
--- /dev/null
+++ b/arch/mn10300/lib/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the MN10300-specific library files..
+#
+
+lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o
+lib-y += do_csum.o
+lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o
diff --git a/arch/mn10300/lib/__ashldi3.S b/arch/mn10300/lib/__ashldi3.S
new file mode 100644
index 000000000000..a51a9506f00c
--- /dev/null
+++ b/arch/mn10300/lib/__ashldi3.S
@@ -0,0 +1,51 @@
+/* MN10300 64-bit arithmetic left shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __ashldi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __ashldi3
+ .type __ashldi3,@function
+__ashldi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __ashldi3_zero
+
+ cmp +31,a0
+ bhi __ashldi3_32plus
+
+ # the count is in the range 1-31
+ asl a0,d1
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ lsr a1,d0,a1 # get overflow from LSW -> MSW
+
+ or_asl a1,d1,a0,d0 # insert overflow into MSW and
+ # shift the LSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__ashldi3_32plus:
+ asl a0,d0,d1
+ clr d0
+__ashldi3_zero:
+ rets
+
+ .size __ashldi3, .-__ashldi3
diff --git a/arch/mn10300/lib/__ashrdi3.S b/arch/mn10300/lib/__ashrdi3.S
new file mode 100644
index 000000000000..6f42382728cb
--- /dev/null
+++ b/arch/mn10300/lib/__ashrdi3.S
@@ -0,0 +1,52 @@
+/* MN10300 64-bit arithmetic right shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __ashrdi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __ashrdi3
+ .type __ashrdi3,@function
+__ashrdi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __ashrdi3_zero
+
+ cmp +31,a0
+ bhi __ashrdi3_32plus
+
+ # the count is in the range 1-31
+ lsr a0,d0
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ asl a1,d1,a1 # get underflow from MSW -> LSW
+
+ or_asr a1,d0,a0,d1 # insert underflow into LSW and
+ # shift the MSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__ashrdi3_32plus:
+ asr a0,d1,d0
+ ext d0 # sign-extend result through MDR
+ mov mdr,d1
+__ashrdi3_zero:
+ rets
+
+ .size __ashrdi3, .-__ashrdi3
diff --git a/arch/mn10300/lib/__lshrdi3.S b/arch/mn10300/lib/__lshrdi3.S
new file mode 100644
index 000000000000..a686aef31e90
--- /dev/null
+++ b/arch/mn10300/lib/__lshrdi3.S
@@ -0,0 +1,52 @@
+/* MN10300 64-bit logical right shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __lshrdi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __lshrdi3
+ .type __lshrdi3,@function
+__lshrdi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __lshrdi3_zero
+
+ cmp +31,a0
+ bhi __lshrdi3_32plus
+
+ # the count is in the range 1-31
+ lsr a0,d0
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ asl a1,d1,a1 # get underflow from MSW -> LSW
+
+ or_lsr a1,d0,a0,d1 # insert underflow into LSW and
+ # shift the MSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__lshrdi3_32plus:
+ lsr a0,d1,d0
+ clr d1
+__lshrdi3_zero:
+ rets
+
+ .size __lshrdi3, .-__lshrdi3
diff --git a/arch/mn10300/lib/ashrdi3.c b/arch/mn10300/lib/ashrdi3.c
new file mode 100644
index 000000000000..c54f61ddf0b5
--- /dev/null
+++ b/arch/mn10300/lib/ashrdi3.c
@@ -0,0 +1,61 @@
+/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__((mode(SI)));
+typedef unsigned int USItype __attribute__((mode(SI)));
+typedef int DItype __attribute__((mode(DI)));
+typedef int word_type __attribute__((mode(__word__)));
+
+struct DIstruct {
+ SItype low;
+ SItype high;
+};
+
+union DIunion {
+ struct DIstruct s;
+ DItype ll;
+};
+
+DItype __ashrdi3(DItype u, word_type b)
+{
+ union DIunion w;
+ union DIunion uu;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1);
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype)uu.s.high << bm;
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((USItype)uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/mn10300/lib/bitops.c b/arch/mn10300/lib/bitops.c
new file mode 100644
index 000000000000..440a7dcbf87b
--- /dev/null
+++ b/arch/mn10300/lib/bitops.c
@@ -0,0 +1,51 @@
+/* MN10300 Non-trivial bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+
+/*
+ * try flipping a bit using BSET and BCLR
+ */
+void change_bit(int nr, volatile void *addr)
+{
+ if (test_bit(nr, addr))
+ goto try_clear_bit;
+
+try_set_bit:
+ if (!test_and_set_bit(nr, addr))
+ return;
+
+try_clear_bit:
+ if (test_and_clear_bit(nr, addr))
+ return;
+
+ goto try_set_bit;
+}
+
+/*
+ * try flipping a bit using BSET and BCLR and returning the old value
+ */
+int test_and_change_bit(int nr, volatile void *addr)
+{
+ if (test_bit(nr, addr))
+ goto try_clear_bit;
+
+try_set_bit:
+ if (!test_and_set_bit(nr, addr))
+ return 0;
+
+try_clear_bit:
+ if (test_and_clear_bit(nr, addr))
+ return 1;
+
+ goto try_set_bit;
+}
diff --git a/arch/mn10300/lib/checksum.c b/arch/mn10300/lib/checksum.c
new file mode 100644
index 000000000000..274f29ec33c1
--- /dev/null
+++ b/arch/mn10300/lib/checksum.c
@@ -0,0 +1,99 @@
+/* MN10300 Optimised checksumming wrappers
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include "internal.h"
+
+static inline unsigned short from32to16(__wsum sum)
+{
+ asm(" add %1,%0 \n"
+ " addc 0xffff,%0 \n"
+ : "=r" (sum)
+ : "r" (sum << 16), "0" (sum & 0xffff0000)
+ );
+ return sum >> 16;
+}
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ return ~do_csum(iph, ihl * 4);
+}
+EXPORT_SYMBOL(ip_fast_csum);
+
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+ __wsum result;
+
+ result = do_csum(buff, len);
+ result += sum;
+ if (sum > result)
+ result++;
+ return result;
+}
+EXPORT_SYMBOL(csum_partial);
+
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+ return ~from32to16(do_csum(buff, len));
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
+__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
+{
+ copy_from_user(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy);
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum)
+{
+ sum = csum_partial(src, len, sum);
+ memcpy(dst, src, len);
+ return sum;
+}
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+
+__wsum csum_partial_copy_from_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr)
+{
+ int missing;
+
+ missing = copy_from_user(dst, src, len);
+ if (missing) {
+ memset(dst + len - missing, 0, missing);
+ *err_ptr = -EFAULT;
+ }
+
+ return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+__wsum csum_and_copy_to_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr)
+{
+ int missing;
+
+ missing = copy_to_user(dst, src, len);
+ if (missing) {
+ memset(dst + len - missing, 0, missing);
+ *err_ptr = -EFAULT;
+ }
+
+ return csum_partial(src, len, sum);
+}
+EXPORT_SYMBOL(csum_and_copy_to_user);
diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c
new file mode 100644
index 000000000000..cce66bc0822d
--- /dev/null
+++ b/arch/mn10300/lib/delay.c
@@ -0,0 +1,50 @@
+/* MN10300 Short delay interpolation routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+
+/*
+ * basic delay loop
+ */
+void __delay(unsigned long loops)
+{
+ int d0;
+
+ asm volatile(
+ " bra 1f \n"
+ " .align 4 \n"
+ "1: bra 2f \n"
+ " .align 4 \n"
+ "2: add -1,%0 \n"
+ " bne 2b \n"
+ : "=&d" (d0)
+ : "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * handle a delay specified in terms of microseconds
+ */
+void __udelay(unsigned long usecs)
+{
+ signed long ioclk, stop;
+
+ /* usecs * CLK / 1E6 */
+ stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000);
+ stop = TMTSCBC - stop;
+
+ do {
+ ioclk = TMTSCBC;
+ } while (stop < ioclk);
+}
+EXPORT_SYMBOL(__udelay);
diff --git a/arch/mn10300/lib/do_csum.S b/arch/mn10300/lib/do_csum.S
new file mode 100644
index 000000000000..e138994e1667
--- /dev/null
+++ b/arch/mn10300/lib/do_csum.S
@@ -0,0 +1,162 @@
+/* Optimised simple memory checksum
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned int do_csum(const unsigned char *buff, size_t len)
+#
+###############################################################################
+ .globl do_csum
+ .type do_csum,@function
+do_csum:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov d1,d2 # count
+ mov d0,a0 # buff
+ clr d1 # accumulator
+
+ cmp +0,d2
+ beq do_csum_done # return if zero-length buffer
+
+ # 4-byte align the buffer pointer
+ btst +3,a0
+ beq do_csum_now_4b_aligned
+
+ btst +1,a0
+ beq do_csum_addr_not_odd
+ movbu (a0),d0
+ inc a0
+ asl +8,d0
+ add d0,d1
+ addc +0,d1
+ add -1,d2
+do_csum_addr_not_odd:
+
+ cmp +2,d2
+ bcs do_csum_fewer_than_4
+ btst +2,a0
+ beq do_csum_now_4b_aligned
+ movhu (a0+),d0
+ add d0,d1
+ addc +0,d1
+ add -2,d2
+ cmp +4,d2
+ bcs do_csum_fewer_than_4
+
+do_csum_now_4b_aligned:
+ # we want to checksum as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls do_csum_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+do_csum_loop:
+ mov (a0+),d0
+ add d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ mov (a0+),d0
+ addc d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ addc +0,d1
+
+ sub d3,d2
+ bcc do_csum_loop
+
+ add d3,d2
+ beq do_csum_done
+
+do_csum_remainder:
+ # cut 16-31 bytes down to 0-15
+ cmp +16,d2
+ bcs do_csum_fewer_than_16
+ mov (a0+),d0
+ add d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ addc +0,d1
+ add -16,d2
+ beq do_csum_done
+
+do_csum_fewer_than_16:
+ # copy the remaining whole words
+ cmp +4,d2
+ bcs do_csum_fewer_than_4
+ cmp +8,d2
+ bcs do_csum_one_word
+ cmp +12,d2
+ bcs do_csum_two_words
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+do_csum_two_words:
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+do_csum_one_word:
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+
+do_csum_fewer_than_4:
+ and +3,d2
+ beq do_csum_done
+ xor_cmp d0,d0,+2,d2
+ bcs do_csum_fewer_than_2
+ movhu (a0+),d0
+do_csum_fewer_than_2:
+ and +1,d2
+ beq do_csum_add_last_bit
+ movbu (a0),d3
+ add d3,d0
+do_csum_add_last_bit:
+ add d0,d1
+ addc +0,d1
+
+do_csum_done:
+ # compress the checksum down to 16 bits
+ mov +0xffff0000,d2
+ and d1,d2
+ asl +16,d1
+ add d2,d1,d0
+ addc +0xffff,d0
+ lsr +16,d0
+
+ # flip the halves of the word result if the buffer was oddly aligned
+ mov (12,sp),d1
+ and +1,d1
+ beq do_csum_not_oddly_aligned
+ swaph d0,d0 # exchange bits 15:8 with 7:0
+
+do_csum_not_oddly_aligned:
+ ret [d2,d3],8
+
+do_csum_end:
+ .size do_csum, do_csum_end-do_csum
diff --git a/arch/mn10300/lib/internal.h b/arch/mn10300/lib/internal.h
new file mode 100644
index 000000000000..0014eee5f04f
--- /dev/null
+++ b/arch/mn10300/lib/internal.h
@@ -0,0 +1,15 @@
+/* Internal definitions for the arch part of the kernel library
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * do_csum.S
+ */
+extern unsigned int do_csum(const unsigned char *, size_t);
diff --git a/arch/mn10300/lib/lshrdi3.c b/arch/mn10300/lib/lshrdi3.c
new file mode 100644
index 000000000000..e05e64e9ce96
--- /dev/null
+++ b/arch/mn10300/lib/lshrdi3.c
@@ -0,0 +1,60 @@
+/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__((mode(SI)));
+typedef unsigned int USItype __attribute__((mode(SI)));
+typedef int DItype __attribute__((mode(DI)));
+typedef int word_type __attribute__((mode(__word__)));
+
+struct DIstruct {
+ SItype low;
+ SItype high;
+};
+
+union DIunion {
+ struct DIstruct s;
+ DItype ll;
+};
+
+DItype __lshrdi3(DItype u, word_type b)
+{
+ union DIunion w;
+ word_type bm;
+ union DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (USItype) uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype) uu.s.high << bm;
+ w.s.high = (USItype) uu.s.high >> b;
+ w.s.low = ((USItype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/mn10300/lib/memcpy.S b/arch/mn10300/lib/memcpy.S
new file mode 100644
index 000000000000..25fb9bb2604f
--- /dev/null
+++ b/arch/mn10300/lib/memcpy.S
@@ -0,0 +1,135 @@
+/* MN10300 Optimised simple memory to memory copy
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memcpy(void *dst, const void *src, size_t n)
+#
+###############################################################################
+ .globl memcpy
+ .type memcpy,@function
+memcpy:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ mov d0,a0 # dst
+ mov d1,a1 # src
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memcpy_done # return if zero-length copy
+
+ # see if the three parameters are all four-byte aligned
+ or d0,d1,d3
+ or d2,d3
+ and +3,d3
+ bne memcpy_1 # jump if not
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls memcpy_4_remainder # 4-byte aligned remainder
+
+ movm [exreg1],(sp)
+ add -32,d2
+ mov +32,d3
+
+memcpy_4_loop:
+ mov (a1+),d0
+ mov (a1+),d1
+ mov (a1+),e0
+ mov (a1+),e1
+ mov (a1+),e4
+ mov (a1+),e5
+ mov (a1+),e6
+ mov (a1+),e7
+ mov d0,(a0+)
+ mov d1,(a0+)
+ mov e0,(a0+)
+ mov e1,(a0+)
+ mov e4,(a0+)
+ mov e5,(a0+)
+ mov e6,(a0+)
+ mov e7,(a0+)
+
+ sub d3,d2
+ bcc memcpy_4_loop
+
+ movm (sp),[exreg1]
+ add d3,d2
+ beq memcpy_4_no_remainder
+
+memcpy_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memcpy_4_three_or_fewer_words
+ mov (a1+),d0
+ mov (a1+),d1
+ mov (a1+),e0
+ mov (a1+),e1
+ mov d0,(a0+)
+ mov d1,(a0+)
+ mov e0,(a0+)
+ mov e1,(a0+)
+ add -16,d2
+ beq memcpy_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memcpy_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memcpy_4_one_word
+ beq memcpy_4_two_words
+ mov (a1+),d0
+ mov d0,(a0+)
+memcpy_4_two_words:
+ mov (a1+),d0
+ mov d0,(a0+)
+memcpy_4_one_word:
+ mov (a1+),d0
+ mov d0,(a0+)
+
+memcpy_4_no_remainder:
+ # check we copied the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ mov (20,sp),d1
+ cmp d2,d1
+ beq memcpy_done
+ break
+ break
+ break
+
+memcpy_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memcpy_1:
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu (a1),d0
+ movbu d0,(a0)
+ add_add d3,a1,d3,a0
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memcpy_end:
+ .size memcpy, memcpy_end-memcpy
diff --git a/arch/mn10300/lib/memmove.S b/arch/mn10300/lib/memmove.S
new file mode 100644
index 000000000000..20b07b62b77c
--- /dev/null
+++ b/arch/mn10300/lib/memmove.S
@@ -0,0 +1,160 @@
+/* MN10300 Optimised simple memory to memory copy, with support for overlapping
+ * regions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memmove(void *dst, const void *src, size_t n)
+#
+###############################################################################
+ .globl memmove
+ .type memmove,@function
+memmove:
+ # fall back to memcpy if dst < src to work bottom up
+ cmp d1,d0
+ bcs memmove_memcpy
+
+ # work top down
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ add d0,d2,a0 # dst end
+ add d1,d2,a1 # src end
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memmove_done # return if zero-length copy
+
+ # see if the three parameters are all four-byte aligned
+ or d0,d1,d3
+ or d2,d3
+ and +3,d3
+ bne memmove_1 # jump if not
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ add -4,a1
+ cmp +31,d2
+ bls memmove_4_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+memmove_4_loop:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ sub d3,d2
+ bcc memmove_4_loop
+
+ add d3,d2
+ beq memmove_4_no_remainder
+
+memmove_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memmove_4_three_or_fewer_words
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+ mov (a1),e0
+ sub_sub +4,a1,+4,a0
+ mov e0,(a0)
+ mov (a1),e1
+ sub_sub +4,a1,+4,a0
+ mov e1,(a0)
+ add -16,d2
+ beq memmove_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memmove_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memmove_4_one_word
+ beq memmove_4_two_words
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+memmove_4_two_words:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+memmove_4_one_word:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+
+memmove_4_no_remainder:
+ # check we copied the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ beq memmove_done
+ break
+ break
+ break
+
+memmove_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memmove_1:
+ add -1,a1
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu (a1),d0
+ sub_sub d3,a1,d3,a0
+ movbu d0,(a0)
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memmove_memcpy:
+ jmp memcpy
+
+memmove_end:
+ .size memmove, memmove_end-memmove
diff --git a/arch/mn10300/lib/memset.S b/arch/mn10300/lib/memset.S
new file mode 100644
index 000000000000..bc02e39629b7
--- /dev/null
+++ b/arch/mn10300/lib/memset.S
@@ -0,0 +1,121 @@
+/* Optimised simple memory fill
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memset(void *dst, int c, size_t n)
+#
+###############################################################################
+ .globl memset
+ .type memset,@function
+memset:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ mov d0,a0 # dst
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memset_done # return if zero-length fill
+
+ # see if the region parameters are four-byte aligned
+ or d0,d2,d3
+ and +3,d3
+ bne memset_1 # jump if not
+
+ extbu d1
+ mov_asl d1,d3,8,d1
+ or_asl d1,d3,8,d1
+ or_asl d1,d3,8,d1
+ or d3,d1
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls memset_4_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+memset_4_loop:
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+
+ sub d3,d2
+ bcc memset_4_loop
+
+ add d3,d2
+ beq memset_4_no_remainder
+
+memset_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memset_4_three_or_fewer_words
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ add -16,d2
+ beq memset_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memset_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memset_4_one_word
+ beq memset_4_two_words
+ mov d1,(a0+)
+memset_4_two_words:
+ mov d1,(a0+)
+memset_4_one_word:
+ mov d1,(a0+)
+
+memset_4_no_remainder:
+ # check we set the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ mov (20,sp),d1
+ cmp d2,d1
+ beq memset_done
+ break
+ break
+ break
+
+memset_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memset_1:
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu d1,(a0)
+ inc a0
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memset_end:
+ .size memset, memset_end-memset
diff --git a/arch/mn10300/lib/negdi2.c b/arch/mn10300/lib/negdi2.c
new file mode 100644
index 000000000000..eae4ecdd5f69
--- /dev/null
+++ b/arch/mn10300/lib/negdi2.c
@@ -0,0 +1,57 @@
+/* More subroutines needed by GCC output code on some machines. */
+/* Compile this one with gcc. */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+In addition to the permissions in the GNU General Public Licence, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public Licence restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+/* It is incorrect to include config.h here, because this file is being
+ compiled for the target, and hence definitions concerning only the host
+ do not apply. */
+
+#include <linux/types.h>
+
+union DWunion {
+ s64 ll;
+ struct {
+ s32 low;
+ s32 high;
+ } s;
+};
+
+s64 __negdi2(s64 u)
+{
+ union DWunion w;
+ union DWunion uu;
+
+ uu.ll = u;
+
+ w.s.low = -uu.s.low;
+ w.s.high = -uu.s.high - ((u32) w.s.low > 0);
+
+ return w.ll;
+}
diff --git a/arch/mn10300/lib/usercopy.c b/arch/mn10300/lib/usercopy.c
new file mode 100644
index 000000000000..a75b203059c1
--- /dev/null
+++ b/arch/mn10300/lib/usercopy.c
@@ -0,0 +1,166 @@
+/* MN10300 Userspace accessor functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+
+unsigned long
+__generic_copy_to_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __copy_user(to, from, n);
+ return n;
+}
+
+unsigned long
+__generic_copy_from_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ __copy_user_zeroing(to, from, n);
+ return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+#define __do_strncpy_from_user(dst, src, count, res) \
+do { \
+ int w; \
+ asm volatile( \
+ " mov %1,%0\n" \
+ " cmp 0,%1\n" \
+ " beq 2f\n" \
+ "0:\n" \
+ " movbu (%5),%2\n" \
+ "1:\n" \
+ " movbu %2,(%6)\n" \
+ " inc %5\n" \
+ " inc %6\n" \
+ " cmp 0,%2\n" \
+ " beq 2f\n" \
+ " add -1,%1\n" \
+ " bne 0b\n" \
+ "2:\n" \
+ " sub %1,%0\n" \
+ "3:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "4:\n" \
+ " mov %3,%0\n" \
+ " jmp 3b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,4b\n" \
+ " .long 1b,4b\n" \
+ " .previous" \
+ :"=&r"(res), "=r"(count), "=&r"(w) \
+ :"i"(-EFAULT), "1"(count), "a"(src), "a"(dst) \
+ :"memory"); \
+} while (0)
+
+long
+__strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res;
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res = -EFAULT;
+ if (access_ok(VERIFY_READ, src, 1))
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+
+/*
+ * Clear a userspace memory
+ */
+#define __do_clear_user(addr, size) \
+do { \
+ int w; \
+ asm volatile( \
+ " cmp 0,%0\n" \
+ " beq 1f\n" \
+ " clr %1\n" \
+ "0: movbu %1,(%3,%2)\n" \
+ " inc %3\n" \
+ " cmp %0,%3\n" \
+ " bne 0b\n" \
+ "1:\n" \
+ " sub %3,%0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ ".previous\n" \
+ : "+r"(size), "=&r"(w) \
+ : "a"(addr), "d"(0) \
+ : "memory"); \
+} while (0)
+
+unsigned long
+__clear_user(void *to, unsigned long n)
+{
+ __do_clear_user(to, n);
+ return n;
+}
+
+unsigned long
+clear_user(void *to, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __do_clear_user(to, n);
+ return n;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+long strnlen_user(const char *s, long n)
+{
+ unsigned long res, w;
+
+ if (!__addr_ok(s))
+ return 0;
+
+ if (n < 0 || n + (u_long) s > current_thread_info()->addr_limit.seg)
+ n = current_thread_info()->addr_limit.seg - (u_long)s;
+
+ asm volatile(
+ "0: cmp %4,%0\n"
+ " beq 2f\n"
+ "1: movbu (%0,%3),%1\n"
+ " inc %0\n"
+ " cmp 0,%1\n"
+ " beq 3f\n"
+ " bra 0b\n"
+ "2: clr %0\n"
+ "3:\n"
+ ".section .fixup,\"ax\"\n"
+ "4: jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .balign 4\n"
+ " .long 1b,4b\n"
+ ".previous\n"
+ :"=d"(res), "=&r"(w)
+ :"0"(0), "a"(s), "r"(n)
+ :"memory");
+ return res;
+}
diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile
new file mode 100644
index 000000000000..28b9d983db0c
--- /dev/null
+++ b/arch/mn10300/mm/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the MN10300-specific memory management code
+#
+
+obj-y := \
+ init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
+ misalignment.o dma-alloc.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-y += cache.o cache-mn10300.o
+ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
+obj-y += cache-flush-mn10300.o
+endif
+endif
diff --git a/arch/mn10300/mm/cache-flush-mn10300.S b/arch/mn10300/mm/cache-flush-mn10300.S
new file mode 100644
index 000000000000..c8ed1cbac107
--- /dev/null
+++ b/arch/mn10300/mm/cache-flush-mn10300.S
@@ -0,0 +1,192 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+ .am33_2
+ .globl mn10300_dcache_flush
+ .globl mn10300_dcache_flush_page
+ .globl mn10300_dcache_flush_range
+ .globl mn10300_dcache_flush_range2
+ .globl mn10300_dcache_flush_inv
+ .globl mn10300_dcache_flush_inv_page
+ .globl mn10300_dcache_flush_inv_range
+ .globl mn10300_dcache_flush_inv_range2
+
+###############################################################################
+#
+# void mn10300_dcache_flush(void)
+# Flush the entire data cache back to RAM
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush:
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_flush_end
+
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+mn10300_dcache_flush_skip:
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_loop
+
+mn10300_dcache_flush_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_page(unsigned start)
+# void mn10300_dcache_flush_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_range2(unsigned start, unsigned size)
+# Flush a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_flush_range2:
+ add d0,d1
+mn10300_dcache_flush_range:
+ movm [d2,d3],(sp)
+
+ movhu (CHCTR),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_flush_range_end
+
+ # round start addr down
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ # write a request to flush all instances of an address from the cache
+ mov DCACHE_PURGE(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache purge control
+ # reg address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+ or L1_CACHE_TAG_VALID,a1 # retain valid entries in the
+ # cache
+
+mn10300_dcache_flush_range_loop:
+ mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
+ # all ways
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
+ add -1,d1
+ bne mn10300_dcache_flush_range_loop
+
+mn10300_dcache_flush_range_end:
+ ret [d2,d3],8
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv(void)
+# Flush the entire data cache and invalidate all entries
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_inv:
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_flush_inv_end
+
+ # hit each line in the dcache with an unconditional purge
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_inv_loop:
+ mov (a1),d0 # unconditional purge
+
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_inv_loop
+
+mn10300_dcache_flush_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv_page(unsigned start)
+# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size)
+# Flush and invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_inv_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_flush_inv_range2:
+ add d0,d1
+mn10300_dcache_flush_inv_range:
+ movm [d2,d3],(sp)
+ movhu (CHCTR),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_flush_inv_range_end
+
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
+ # addr down
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ # write a request to flush and invalidate all instances of an address
+ # from the cache
+ mov DCACHE_PURGE(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache purge control
+ # reg address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+mn10300_dcache_flush_inv_range_loop:
+ mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
+ # in all ways
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
+ add -1,d1
+ bne mn10300_dcache_flush_inv_range_loop
+
+mn10300_dcache_flush_inv_range_end:
+ ret [d2,d3],8
diff --git a/arch/mn10300/mm/cache-mn10300.S b/arch/mn10300/mm/cache-mn10300.S
new file mode 100644
index 000000000000..e839d0aedd69
--- /dev/null
+++ b/arch/mn10300/mm/cache-mn10300.S
@@ -0,0 +1,289 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define mn10300_dcache_inv_range_intr_interval \
+ +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
+
+#if mn10300_dcache_inv_range_intr_interval > 0xff
+#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
+#endif
+
+ .am33_2
+
+ .globl mn10300_icache_inv
+ .globl mn10300_dcache_inv
+ .globl mn10300_dcache_inv_range
+ .globl mn10300_dcache_inv_range2
+ .globl mn10300_dcache_inv_page
+
+###############################################################################
+#
+# void mn10300_icache_inv(void)
+# Invalidate the entire icache
+#
+###############################################################################
+ ALIGN
+mn10300_icache_inv:
+ mov CHCTR,a0
+
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq mn10300_icache_inv_end
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the icache
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ and ~CHCTR_ICINV,d0
+ or CHCTR_ICEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ mov d1,epsw
+
+mn10300_icache_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv(void)
+# Invalidate the entire dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_inv:
+ mov CHCTR,a0
+
+ movhu (a0),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_inv_end
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the dcache
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_DCINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ and ~CHCTR_DCINV,d0
+ or CHCTR_DCEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ mov d1,epsw
+
+mn10300_dcache_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
+# void mn10300_dcache_inv_page(unsigned start)
+# Invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_inv_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_inv_range2:
+ add d0,d1
+mn10300_dcache_inv_range:
+ movm [d2,d3,a2],(sp)
+ mov CHCTR,a2
+
+ movhu (a2),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_inv_range_end
+
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
+ # addr down
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ clr d2 # we're going to clear tag ram
+ # entries
+
+ # read the tags from the tag RAM, and if they indicate a valid dirty
+ # cache line then invalidate that line
+ mov DCACHE_TAG(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache tag RAM
+ # access address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+ and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
+
+mn10300_dcache_inv_range_outer_loop:
+ # disable interrupts
+ mov epsw,d3
+ and ~EPSW_IE,epsw
+ nop # note that reading CHCTR and
+ # AND'ing D0 occupy two delay
+ # slots after disabling
+ # interrupts
+
+ # disable the dcache
+ movhu (a2),d0
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a2)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a2),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+mn10300_dcache_inv_range_loop:
+
+ # process the way 0 slot
+ mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_0:
+
+ # process the way 1 slot
+ mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_1:
+
+ # process the way 2 slot
+ mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_2:
+
+ # process the way 3 slot
+ mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_3:
+
+ # approx every N steps we re-enable the cache and see if there are any
+ # interrupts to be processed
+ # we also break out if we've reached the end of the loop
+ # (the bottom nibble of the count is zero in both cases)
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ btst mn10300_dcache_inv_range_intr_interval,d1
+ bne mn10300_dcache_inv_range_loop
+
+ # wait for the cache to finish what it's doing
+ setlb
+ movhu (a2),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ or CHCTR_DCEN,d0
+ movhu d0,(a2)
+ movhu (a2),d0
+
+ # re-enable interrupts
+ # - we don't bother with delay NOPs as we'll have enough instructions
+ # before we disable interrupts again to give the interrupts a chance
+ # to happen
+ mov d3,epsw
+
+ # go around again if the counter hasn't yet reached zero
+ add 0,d1
+ bne mn10300_dcache_inv_range_outer_loop
+
+mn10300_dcache_inv_range_end:
+ ret [d2,d3,a2],12
diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c
new file mode 100644
index 000000000000..1b76719ec1c3
--- /dev/null
+++ b/arch/mn10300/mm/cache.c
@@ -0,0 +1,121 @@
+/* MN10300 Cache flushing routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+EXPORT_SYMBOL(mn10300_icache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_inv_page);
+
+#ifdef CONFIG_MN10300_CACHE_WBACK
+EXPORT_SYMBOL(mn10300_dcache_flush);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_page);
+EXPORT_SYMBOL(mn10300_dcache_flush_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_page);
+#endif
+
+/*
+ * write a page back from the dcache and invalidate the icache so that we can
+ * run code from it that we've just written into it
+ */
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+ mn10300_dcache_flush_page(page_to_phys(page));
+ mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_page);
+
+/*
+ * write some code we've just written back from the dcache and invalidate the
+ * icache so that we can run that code
+ */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+#ifdef CONFIG_MN10300_CACHE_WBACK
+ unsigned long addr, size, off;
+ struct page *page;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *ppte, pte;
+
+ for (; start < end; start += size) {
+ /* work out how much of the page to flush */
+ off = start & (PAGE_SIZE - 1);
+
+ size = end - start;
+ if (size > PAGE_SIZE - off)
+ size = PAGE_SIZE - off;
+
+ /* get the physical address the page is mapped to from the page
+ * tables */
+ pgd = pgd_offset(current->mm, start);
+ if (!pgd || !pgd_val(*pgd))
+ continue;
+
+ pud = pud_offset(pgd, start);
+ if (!pud || !pud_val(*pud))
+ continue;
+
+ pmd = pmd_offset(pud, start);
+ if (!pmd || !pmd_val(*pmd))
+ continue;
+
+ ppte = pte_offset_map(pmd, start);
+ if (!ppte)
+ continue;
+ pte = *ppte;
+ pte_unmap(ppte);
+
+ if (pte_none(pte))
+ continue;
+
+ page = pte_page(pte);
+ if (!page)
+ continue;
+
+ addr = page_to_phys(page);
+
+ /* flush the dcache and invalidate the icache coverage on that
+ * region */
+ mn10300_dcache_flush_range2(addr + off, size);
+ }
+#endif
+
+ mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+/*
+ * allow userspace to flush the instruction cache
+ */
+asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
+{
+ if (end < start)
+ return -EINVAL;
+
+ flush_icache_range(start, end);
+ return 0;
+}
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
new file mode 100644
index 000000000000..f3649d8f50e3
--- /dev/null
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -0,0 +1,56 @@
+/* MN10300 Dynamic DMA mapping support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-dma.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int gfp)
+{
+ unsigned long addr;
+ void *ret;
+
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+ gfp |= GFP_DMA;
+
+ addr = __get_free_pages(gfp, get_order(size));
+ if (!addr)
+ return NULL;
+
+ /* map the coherent memory through the uncached memory window */
+ ret = (void *) (addr | 0x20000000);
+
+ /* fill the memory with obvious rubbish */
+ memset((void *) addr, 0xfb, size);
+
+ /* write back and evict all cache lines covering this region */
+ mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE);
+
+ *dma_handle = virt_to_bus((void *) addr);
+ return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ unsigned long addr = (unsigned long) vaddr & ~0x20000000;
+
+ free_pages(addr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
diff --git a/arch/mn10300/mm/extable.c b/arch/mn10300/mm/extable.c
new file mode 100644
index 000000000000..25e5485ab87d
--- /dev/null
+++ b/arch/mn10300/mm/extable.c
@@ -0,0 +1,26 @@
+/* MN10300 In-kernel exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
new file mode 100644
index 000000000000..78f092ca0316
--- /dev/null
+++ b/arch/mn10300/mm/fault.c
@@ -0,0 +1,405 @@
+/* MN10300 MMU Fault handler
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/vt_kern.h> /* For unblank_screen() */
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/hardirq.h>
+#include <asm/gdb-stub.h>
+#include <asm/cpu-regs.h>
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+ if (yes) {
+ oops_in_progress = 1;
+#ifdef CONFIG_SMP
+ /* Many serial drivers do __global_cli() */
+ global_irq_lock = 0;
+#endif
+ } else {
+ int loglevel_save = console_loglevel;
+#ifdef CONFIG_VT
+ unblank_screen();
+#endif
+ oops_in_progress = 0;
+ /*
+ * OK, the message is on the console. Now we call printk()
+ * without oops_in_progress set so that printk will give klogd
+ * a poke. Hold onto your hats...
+ */
+ console_loglevel = 15; /* NMI oopser may have shut the console
+ * up */
+ printk(" ");
+ console_loglevel = loglevel_save;
+ }
+}
+
+void do_BUG(const char *file, int line)
+{
+ bust_spinlocks(1);
+ printk(KERN_EMERG "------------[ cut here ]------------\n");
+ printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
+}
+
+#if 0
+static void print_pagetable_entries(pgd_t *pgdir, unsigned long address)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ pgd = pgdir + __pgd_offset(address);
+ printk(KERN_DEBUG "pgd entry %p: %016Lx\n",
+ pgd, (long long) pgd_val(*pgd));
+
+ if (!pgd_present(*pgd)) {
+ printk(KERN_DEBUG "... pgd not present!\n");
+ return;
+ }
+ pmd = pmd_offset(pgd, address);
+ printk(KERN_DEBUG "pmd entry %p: %016Lx\n",
+ pmd, (long long)pmd_val(*pmd));
+
+ if (!pmd_present(*pmd)) {
+ printk(KERN_DEBUG "... pmd not present!\n");
+ return;
+ }
+ pte = pte_offset(pmd, address);
+ printk(KERN_DEBUG "pte entry %p: %016Lx\n",
+ pte, (long long) pte_val(*pte));
+
+ if (!pte_present(*pte))
+ printk(KERN_DEBUG "... pte not present!\n");
+}
+#endif
+
+asmlinkage void monitor_signal(struct pt_regs *);
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * fault_code:
+ * - LSW: either MMUFCR_IFC or MMUFCR_DFC as appropriate
+ * - MSW: 0 if data access, 1 if instruction access
+ * - bit 0: TLB miss flag
+ * - bit 1: initial write
+ * - bit 2: page invalid
+ * - bit 3: protection violation
+ * - bit 4: accessor (0=user 1=kernel)
+ * - bit 5: 0=read 1=write
+ * - bit 6-8: page protection spec
+ * - bit 9: illegal address
+ * - bit 16: 0=data 1=ins
+ *
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
+ unsigned long address)
+{
+ struct vm_area_struct *vma;
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ unsigned long page;
+ siginfo_t info;
+ int write, fault;
+
+#ifdef CONFIG_GDBSTUB
+ /* handle GDB stub causing a fault */
+ if (gdbstub_busy) {
+ gdbstub_exception(regs, TBR & TBR_INT_CODE);
+ return;
+ }
+#endif
+
+#if 0
+ printk(KERN_DEBUG "--- do_page_fault(%p,%s:%04lx,%08lx)\n",
+ regs,
+ fault_code & 0x10000 ? "ins" : "data",
+ fault_code & 0xffff, address);
+#endif
+
+ tsk = current;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * This verifies that the fault happens in kernel space
+ * and that the fault was a page not present (invalid) error
+ */
+ if (address >= VMALLOC_START && address < VMALLOC_END &&
+ (fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR &&
+ (fault_code & MMUFCR_xFC_PGINVAL) == MMUFCR_xFC_PGINVAL
+ )
+ goto vmalloc_fault;
+
+ mm = tsk->mm;
+ info.si_code = SEGV_MAPERR;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+ if (in_interrupt() || !mm)
+ goto no_context;
+
+ down_read(&mm->mmap_sem);
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+ /* accessing the stack below the stack pointer is always a
+ * bug */
+ if ((address & PAGE_MASK) + 2 * PAGE_SIZE < regs->sp) {
+#if 0
+ printk(KERN_WARNING
+ "[%d] ### Access below stack @%lx (sp=%lx)\n",
+ current->pid, address, regs->sp);
+ printk(KERN_WARNING
+ "vma [%08x - %08x]\n",
+ vma->vm_start, vma->vm_end);
+ show_registers(regs);
+ printk(KERN_WARNING
+ "[%d] ### Code: [%08lx]"
+ " %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ current->pid,
+ regs->pc,
+ ((u8 *) regs->pc)[0],
+ ((u8 *) regs->pc)[1],
+ ((u8 *) regs->pc)[2],
+ ((u8 *) regs->pc)[3],
+ ((u8 *) regs->pc)[4],
+ ((u8 *) regs->pc)[5],
+ ((u8 *) regs->pc)[6],
+ ((u8 *) regs->pc)[7]
+ );
+#endif
+ goto bad_area;
+ }
+ }
+
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ info.si_code = SEGV_ACCERR;
+ write = 0;
+ switch (fault_code & (MMUFCR_xFC_PGINVAL|MMUFCR_xFC_TYPE)) {
+ default: /* 3: write, present */
+ case MMUFCR_xFC_TYPE_WRITE:
+#ifdef TEST_VERIFY_AREA
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+ printk(KERN_DEBUG "WP fault at %08lx\n", regs->pc);
+#endif
+ /* write to absent page */
+ case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_WRITE:
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ write++;
+ break;
+
+ /* read from protected page */
+ case MMUFCR_xFC_TYPE_READ:
+ goto bad_area;
+
+ /* read from absent page present */
+ case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_READ:
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ break;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ fault = handle_mm_fault(mm, vma, address, write);
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+ if (fault & VM_FAULT_MAJOR)
+ current->maj_flt++;
+ else
+ current->min_flt++;
+
+ up_read(&mm->mmap_sem);
+ return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+
+ /* User mode accesses just cause a SIGSEGV */
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ /* info.si_code has been set above */
+ info.si_addr = (void *)address;
+ force_sig_info(SIGSEGV, &info, tsk);
+ return;
+ }
+
+no_context:
+ monitor_signal(regs);
+ /* Are we prepared to handle this kernel fault? */
+ if (fixup_exception(regs))
+ return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+ bust_spinlocks(1);
+
+ if (address < PAGE_SIZE)
+ printk(KERN_ALERT
+ "Unable to handle kernel NULL pointer dereference");
+ else
+ printk(KERN_ALERT
+ "Unable to handle kernel paging request");
+ printk(" at virtual address %08lx\n", address);
+ printk(" printing pc:\n");
+ printk(KERN_ALERT "%08lx\n", regs->pc);
+
+#ifdef CONFIG_GDBSTUB
+ gdbstub_intercept(
+ regs, fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR);
+#endif
+
+ page = PTBR;
+ page = ((unsigned long *) __va(page))[address >> 22];
+ printk(KERN_ALERT "*pde = %08lx\n", page);
+ if (page & 1) {
+ page &= PAGE_MASK;
+ address &= 0x003ff000;
+ page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
+ printk(KERN_ALERT "*pte = %08lx\n", page);
+ }
+
+ die("Oops", regs, fault_code);
+ do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+ printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
+ do_exit(SIGKILL);
+ goto no_context;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+
+ /*
+ * Send a sigbus, regardless of whether we were in kernel
+ * or user mode.
+ */
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRERR;
+ info.si_addr = (void *)address;
+ force_sig_info(SIGBUS, &info, tsk);
+
+ /* Kernel mode? Handle exceptions or die */
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+ goto no_context;
+ return;
+
+vmalloc_fault:
+ {
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Do _not_ use "tsk" here. We might be inside
+ * an interrupt in the middle of a task switch..
+ */
+ int index = pgd_index(address);
+ pgd_t *pgd, *pgd_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+ pte_t *pte_k;
+
+ pgd_k = init_mm.pgd + index;
+
+ if (!pgd_present(*pgd_k))
+ goto no_context;
+
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+
+ pmd_k = pmd_offset(pud_k, address);
+ if (!pmd_present(*pmd_k))
+ goto no_context;
+
+ pgd = (pgd_t *) PTBR + index;
+ pud = pud_offset(pgd, address);
+ pmd = pmd_offset(pud, address);
+ set_pmd(pmd, *pmd_k);
+
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ goto no_context;
+ return;
+ }
+}
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
new file mode 100644
index 000000000000..8c5d88c7b90a
--- /dev/null
+++ b/arch/mn10300/mm/init.c
@@ -0,0 +1,160 @@
+/* MN10300 Memory management initialisation
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/dma.h>
+#include <asm/tlb.h>
+#include <asm/sections.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long highstart_pfn, highend_pfn;
+
+/*
+ * set up paging
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES] = {0,};
+ pte_t *ppte;
+ int loop;
+
+ /* main kernel space -> RAM mapping is handled as 1:1 transparent by
+ * the MMU */
+ memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
+ memset(kernel_vmalloc_ptes, 0, sizeof(kernel_vmalloc_ptes));
+
+ /* load the VMALLOC area PTE table addresses into the kernel PGD */
+ ppte = kernel_vmalloc_ptes;
+ for (loop = VMALLOC_START / (PAGE_SIZE * PTRS_PER_PTE);
+ loop < VMALLOC_END / (PAGE_SIZE * PTRS_PER_PTE);
+ loop++
+ ) {
+ set_pgd(swapper_pg_dir + loop, __pgd(__pa(ppte) | _PAGE_TABLE));
+ ppte += PAGE_SIZE / sizeof(pte_t);
+ }
+
+ /* declare the sizes of the RAM zones (only use the normal zone) */
+ zones_size[ZONE_NORMAL] =
+ (contig_page_data.bdata->node_low_pfn) -
+ (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+
+ /* pass the memory from the bootmem allocator to the main allocator */
+ free_area_init(zones_size);
+
+ __flush_tlb_all();
+}
+
+/*
+ * transfer all the memory from the bootmem allocator to the runtime allocator
+ */
+void __init mem_init(void)
+{
+ int codesize, reservedpages, datasize, initsize;
+ int tmp;
+
+ if (!mem_map)
+ BUG();
+
+#define START_PFN (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define MAX_LOW_PFN (contig_page_data.bdata->node_low_pfn)
+
+ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
+ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
+
+ /* clear the zero-page */
+ memset(empty_zero_page, 0, PAGE_SIZE);
+
+ /* this will put all low memory onto the freelists */
+ totalram_pages += free_all_bootmem();
+
+ reservedpages = 0;
+ for (tmp = 0; tmp < num_physpages; tmp++)
+ if (PageReserved(&mem_map[tmp]))
+ reservedpages++;
+
+ codesize = (unsigned long) &_etext - (unsigned long) &_stext;
+ datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+ printk(KERN_INFO
+ "Memory: %luk/%luk available"
+ " (%dk kernel code, %dk reserved, %dk data, %dk init,"
+ " %ldk highmem)\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT - 10),
+ max_mapnr << (PAGE_SHIFT - 10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT - 10),
+ datasize >> 10,
+ initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10))
+ );
+}
+
+/*
+ *
+ */
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+ unsigned long addr;
+
+ for (addr = begin; addr < end; addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ memset((void *) addr, 0xcc, PAGE_SIZE);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+/*
+ * recycle memory containing stuff only required for initialisation
+ */
+void free_initmem(void)
+{
+ free_init_pages("unused kernel memory",
+ (unsigned long) &__init_begin,
+ (unsigned long) &__init_end);
+}
+
+/*
+ * dispose of the memory on which the initial ramdisk resided
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ free_init_pages("initrd memory", start, end);
+}
+#endif
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
new file mode 100644
index 000000000000..32aa89dc3848
--- /dev/null
+++ b/arch/mn10300/mm/misalignment.c
@@ -0,0 +1,661 @@
+/* MN10300 Misalignment fixup handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/asm-offsets.h>
+
+#if 0
+#define kdebug(FMT, ...) printk(KERN_DEBUG FMT, ##__VA_ARGS__)
+#else
+#define kdebug(FMT, ...) do {} while (0)
+#endif
+
+static int misalignment_addr(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ void **_address, unsigned long **_postinc);
+
+static int misalignment_reg(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ unsigned long **_register);
+
+static inline unsigned int_log2(unsigned x)
+{
+ unsigned y;
+ asm("bsch %1,%0" : "=r"(y) : "r"(x), "0"(0));
+ return y;
+}
+#define log2(x) int_log2(x)
+
+static const unsigned Dreg_index[] = {
+ REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+static const unsigned Areg_index[] = {
+ REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2
+};
+
+static const unsigned Rreg_index[] = {
+ REG_E0 >> 2, REG_E1 >> 2, REG_E2 >> 2, REG_E3 >> 2,
+ REG_E4 >> 2, REG_E5 >> 2, REG_E6 >> 2, REG_E7 >> 2,
+ REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2,
+ REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+enum format_id {
+ FMT_S0,
+ FMT_S1,
+ FMT_S2,
+ FMT_S4,
+ FMT_D0,
+ FMT_D1,
+ FMT_D2,
+ FMT_D4,
+ FMT_D6,
+ FMT_D7,
+ FMT_D8,
+ FMT_D9,
+};
+
+struct {
+ u_int8_t opsz, dispsz;
+} format_tbl[16] = {
+ [FMT_S0] = { 8, 0 },
+ [FMT_S1] = { 8, 8 },
+ [FMT_S2] = { 8, 16 },
+ [FMT_S4] = { 8, 32 },
+ [FMT_D0] = { 16, 0 },
+ [FMT_D1] = { 16, 8 },
+ [FMT_D2] = { 16, 16 },
+ [FMT_D4] = { 16, 32 },
+ [FMT_D6] = { 24, 0 },
+ [FMT_D7] = { 24, 8 },
+ [FMT_D8] = { 24, 24 },
+ [FMT_D9] = { 24, 32 },
+};
+
+enum value_id {
+ DM0, /* data reg in opcode in bits 0-1 */
+ DM1, /* data reg in opcode in bits 2-3 */
+ DM2, /* data reg in opcode in bits 4-5 */
+ AM0, /* addr reg in opcode in bits 0-1 */
+ AM1, /* addr reg in opcode in bits 2-3 */
+ AM2, /* addr reg in opcode in bits 4-5 */
+ RM0, /* reg in opcode in bits 0-3 */
+ RM1, /* reg in opcode in bits 2-5 */
+ RM2, /* reg in opcode in bits 4-7 */
+ RM4, /* reg in opcode in bits 8-11 */
+ RM6, /* reg in opcode in bits 12-15 */
+
+ RD0, /* reg in displacement in bits 0-3 */
+ RD2, /* reg in displacement in bits 4-7 */
+
+ SP, /* stack pointer */
+
+ SD8, /* 8-bit signed displacement */
+ SD16, /* 16-bit signed displacement */
+ SD24, /* 24-bit signed displacement */
+ SIMM4_2, /* 4-bit signed displacement in opcode bits 4-7 */
+ SIMM8, /* 8-bit signed immediate */
+ IMM24, /* 24-bit unsigned immediate */
+ IMM32, /* 32-bit unsigned immediate */
+ IMM32_HIGH8, /* 32-bit unsigned immediate, high 8-bits in opcode */
+
+ DN0 = DM0,
+ DN1 = DM1,
+ DN2 = DM2,
+ AN0 = AM0,
+ AN1 = AM1,
+ AN2 = AM2,
+ RN0 = RM0,
+ RN1 = RM1,
+ RN2 = RM2,
+ RN4 = RM4,
+ RN6 = RM6,
+ DI = DM1,
+ RI = RM2,
+
+};
+
+struct mn10300_opcode {
+ const char *name;
+ u_int32_t opcode;
+ u_int32_t opmask;
+ unsigned exclusion;
+
+ enum format_id format;
+
+ unsigned cpu_mask;
+#define AM33 330
+
+ unsigned params[2];
+#define MEM(ADDR) (0x80000000 | (ADDR))
+#define MEM2(ADDR1, ADDR2) (0x80000000 | (ADDR1) << 8 | (ADDR2))
+#define MEMINC(ADDR) (0x81000000 | (ADDR))
+#define MEMINC2(ADDR, INC) (0x81000000 | (ADDR) << 8 | (INC))
+};
+
+/* LIBOPCODES EXCERPT
+ Assemble Matsushita MN10300 instructions.
+ Copyright 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public Licence as published by
+ the Free Software Foundation; either version 2 of the Licence, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public Licence for more details.
+
+ You should have received a copy of the GNU General Public Licence
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+static const struct mn10300_opcode mn10300_opcodes[] = {
+{ "mov", 0x60, 0xf0, 0, FMT_S0, 0, {DM1, MEM(AN0)}},
+{ "mov", 0x70, 0xf0, 0, FMT_S0, 0, {MEM(AM0), DN1}},
+{ "mov", 0xf000, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), AN1}},
+{ "mov", 0xf010, 0xfff0, 0, FMT_D0, 0, {AM1, MEM(AN0)}},
+{ "mov", 0xf300, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}},
+{ "mov", 0xf340, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}},
+{ "mov", 0xf380, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), AN2}},
+{ "mov", 0xf3c0, 0xffc0, 0, FMT_D0, 0, {AM2, MEM2(DI, AN0)}},
+{ "mov", 0xf80000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}},
+{ "mov", 0xf81000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}},
+{ "mov", 0xf82000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8,AM0), AN1}},
+{ "mov", 0xf83000, 0xfff000, 0, FMT_D1, 0, {AM1, MEM2(SD8, AN0)}},
+{ "mov", 0xf8f000, 0xfffc00, 0, FMT_D1, AM33, {MEM2(SD8, AM0), SP}},
+{ "mov", 0xf8f400, 0xfffc00, 0, FMT_D1, AM33, {SP, MEM2(SD8, AN0)}},
+{ "mov", 0xf90a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}},
+{ "mov", 0xf91a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}},
+{ "mov", 0xf96a00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}},
+{ "mov", 0xf97a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}},
+{ "mov", 0xfa000000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}},
+{ "mov", 0xfa100000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}},
+{ "mov", 0xfa200000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), AN1}},
+{ "mov", 0xfa300000, 0xfff00000, 0, FMT_D2, 0, {AM1, MEM2(SD16, AN0)}},
+{ "mov", 0xfb0a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}},
+{ "mov", 0xfb1a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}},
+{ "mov", 0xfb6a0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}},
+{ "mov", 0xfb7a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "mov", 0xfb8e0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}},
+{ "mov", 0xfb9e0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}},
+{ "mov", 0xfc000000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}},
+{ "mov", 0xfc100000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}},
+{ "mov", 0xfc200000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), AN1}},
+{ "mov", 0xfc300000, 0xfff00000, 0, FMT_D4, 0, {AM1, MEM2(IMM32,AN0)}},
+{ "mov", 0xfd0a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}},
+{ "mov", 0xfd1a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}},
+{ "mov", 0xfd6a0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}},
+{ "mov", 0xfd7a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}},
+{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "mov", 0xfe6a0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "mov", 0xfe7a0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+
+{ "movhu", 0xf060, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), DN1}},
+{ "movhu", 0xf070, 0xfff0, 0, FMT_D0, 0, {DM1, MEM(AN0)}},
+{ "movhu", 0xf480, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}},
+{ "movhu", 0xf4c0, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}},
+{ "movhu", 0xf86000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}},
+{ "movhu", 0xf87000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}},
+{ "movhu", 0xf94a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}},
+{ "movhu", 0xf95a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}},
+{ "movhu", 0xf9ea00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}},
+{ "movhu", 0xf9fa00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}},
+{ "movhu", 0xfa600000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}},
+{ "movhu", 0xfa700000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}},
+{ "movhu", 0xfb4a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}},
+{ "movhu", 0xfb5a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}},
+{ "movhu", 0xfbce0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}},
+{ "movhu", 0xfbde0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}},
+{ "movhu", 0xfbea0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}},
+{ "movhu", 0xfbfa0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "movhu", 0xfc600000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}},
+{ "movhu", 0xfc700000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}},
+{ "movhu", 0xfd4a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}},
+{ "movhu", 0xfd5a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}},
+{ "movhu", 0xfdea0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}},
+{ "movhu", 0xfdfa0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}},
+{ "movhu", 0xfe4a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "movhu", 0xfe5a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+{ 0, 0, 0, 0, 0, 0, {0}},
+};
+
+/*
+ * fix up misalignment problems where possible
+ */
+asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code)
+{
+ const struct exception_table_entry *fixup;
+ const struct mn10300_opcode *pop;
+ unsigned long *registers = (unsigned long *) regs;
+ unsigned long data, *store, *postinc;
+ mm_segment_t seg;
+ siginfo_t info;
+ uint32_t opcode, disp, noc, xo, xm;
+ uint8_t *pc, byte;
+ void *address;
+ unsigned tmp, npop;
+
+ kdebug("MISALIGN at %lx\n", regs->pc);
+
+ if (in_interrupt())
+ die("Misalignment trap in interrupt context", regs, code);
+
+ if (regs->epsw & EPSW_IE)
+ asm volatile("or %0,epsw" : : "i"(EPSW_IE));
+
+ seg = get_fs();
+ set_fs(KERNEL_DS);
+
+ fixup = search_exception_tables(regs->pc);
+
+ /* first thing to do is to match the opcode */
+ pc = (u_int8_t *) regs->pc;
+
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ opcode = byte;
+ noc = 8;
+
+ for (pop = mn10300_opcodes; pop->name; pop++) {
+ npop = log2(pop->opcode | pop->opmask);
+ if (npop <= 0 || npop > 31)
+ continue;
+ npop = (npop + 8) & ~7;
+
+ got_more_bits:
+ if (npop == noc) {
+ if ((opcode & pop->opmask) == pop->opcode)
+ goto found_opcode;
+ } else if (npop > noc) {
+ xo = pop->opcode >> (npop - noc);
+ xm = pop->opmask >> (npop - noc);
+
+ if ((opcode & xm) != xo)
+ continue;
+
+ /* we've got a partial match (an exact match on the
+ * first N bytes), so we need to get some more data */
+ pc++;
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ opcode = opcode << 8 | byte;
+ noc += 8;
+ goto got_more_bits;
+ } else {
+ /* there's already been a partial match as long as the
+ * complete match we're now considering, so this one
+ * should't match */
+ continue;
+ }
+ }
+
+ /* didn't manage to find a fixup */
+ if (!user_mode(regs))
+ printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n",
+ regs->pc, opcode);
+
+failed:
+ set_fs(seg);
+ if (die_if_no_fixup("misalignment error", regs, code))
+ return;
+
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRALN;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGBUS, &info, current);
+ return;
+
+ /* error reading opcodes */
+fetch_error:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %p: fault whilst reading instruction data\n",
+ pc);
+ goto failed;
+
+bad_addr_mode:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported addressing mode %x\n",
+ regs->pc, opcode);
+ goto failed;
+
+bad_reg_mode:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported register mode %x\n",
+ regs->pc, opcode);
+ goto failed;
+
+unsupported_instruction:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported instruction %x (%s)\n",
+ regs->pc, opcode, pop->name);
+ goto failed;
+
+transfer_failed:
+ set_fs(seg);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+ if (die_if_no_fixup("misalignment fixup", regs, code))
+ return;
+
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_code = 0;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGSEGV, &info, current);
+ return;
+
+ /* we matched the opcode */
+found_opcode:
+ kdebug("MISALIGN: %lx: %x==%x { %x, %x }\n",
+ regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]);
+
+ tmp = format_tbl[pop->format].opsz;
+ if (tmp > noc)
+ BUG(); /* match was less complete than it ought to have been */
+
+ if (tmp < noc) {
+ tmp = noc - tmp;
+ opcode >>= tmp;
+ pc -= tmp >> 3;
+ }
+
+ /* grab the extra displacement (note it's LSB first) */
+ disp = 0;
+ tmp = format_tbl[pop->format].dispsz >> 3;
+ while (tmp > 0) {
+ tmp--;
+ disp <<= 8;
+
+ pc++;
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ disp |= byte;
+ }
+
+ set_fs(KERNEL_XDS);
+ if (fixup || regs->epsw & EPSW_nSL)
+ set_fs(seg);
+
+ tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000;
+ if (!tmp) {
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx:"
+ " insn not move to/from memory %x\n",
+ regs->pc, opcode);
+ goto failed;
+ }
+
+ if (pop->params[0] & 0x80000000) {
+ /* move memory to register */
+ if (!misalignment_addr(registers, pop->params[0], opcode, disp,
+ &address, &postinc))
+ goto bad_addr_mode;
+
+ if (!misalignment_reg(registers, pop->params[1], opcode, disp,
+ &store))
+ goto bad_reg_mode;
+
+ if (strcmp(pop->name, "mov") == 0) {
+ kdebug("FIXUP: mov (%p),DARn\n", address);
+ if (copy_from_user(&data, (void *) address, 4) != 0)
+ goto transfer_failed;
+ if (pop->params[0] & 0x1000000)
+ *postinc += 4;
+ } else if (strcmp(pop->name, "movhu") == 0) {
+ kdebug("FIXUP: movhu (%p),DARn\n", address);
+ data = 0;
+ if (copy_from_user(&data, (void *) address, 2) != 0)
+ goto transfer_failed;
+ if (pop->params[0] & 0x1000000)
+ *postinc += 2;
+ } else {
+ goto unsupported_instruction;
+ }
+
+ *store = data;
+ } else {
+ /* move register to memory */
+ if (!misalignment_reg(registers, pop->params[0], opcode, disp,
+ &store))
+ goto bad_reg_mode;
+
+ if (!misalignment_addr(registers, pop->params[1], opcode, disp,
+ &address, &postinc))
+ goto bad_addr_mode;
+
+ data = *store;
+
+ if (strcmp(pop->name, "mov") == 0) {
+ kdebug("FIXUP: mov %lx,(%p)\n", data, address);
+ if (copy_to_user((void *) address, &data, 4) != 0)
+ goto transfer_failed;
+ if (pop->params[1] & 0x1000000)
+ *postinc += 4;
+ } else if (strcmp(pop->name, "movhu") == 0) {
+ kdebug("FIXUP: movhu %hx,(%p)\n",
+ (uint16_t) data, address);
+ if (copy_to_user((void *) address, &data, 2) != 0)
+ goto transfer_failed;
+ if (pop->params[1] & 0x1000000)
+ *postinc += 2;
+ } else {
+ goto unsupported_instruction;
+ }
+ }
+
+ tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz;
+ regs->pc += tmp >> 3;
+
+ set_fs(seg);
+ return;
+}
+
+/*
+ * determine the address that was being accessed
+ */
+static int misalignment_addr(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ void **_address, unsigned long **_postinc)
+{
+ unsigned long *postinc = NULL, address = 0, tmp;
+
+ params &= 0x7fffffff;
+
+ do {
+ switch (params & 0xff) {
+ case DM0:
+ postinc = &registers[Dreg_index[opcode & 0x03]];
+ address += *postinc;
+ break;
+ case DM1:
+ postinc = &registers[Dreg_index[opcode >> 2 & 0x0c]];
+ address += *postinc;
+ break;
+ case DM2:
+ postinc = &registers[Dreg_index[opcode >> 4 & 0x30]];
+ address += *postinc;
+ break;
+ case AM0:
+ postinc = &registers[Areg_index[opcode & 0x03]];
+ address += *postinc;
+ break;
+ case AM1:
+ postinc = &registers[Areg_index[opcode >> 2 & 0x0c]];
+ address += *postinc;
+ break;
+ case AM2:
+ postinc = &registers[Areg_index[opcode >> 4 & 0x30]];
+ address += *postinc;
+ break;
+ case RM0:
+ postinc = &registers[Rreg_index[opcode & 0x0f]];
+ address += *postinc;
+ break;
+ case RM1:
+ postinc = &registers[Rreg_index[opcode >> 2 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM2:
+ postinc = &registers[Rreg_index[opcode >> 4 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM4:
+ postinc = &registers[Rreg_index[opcode >> 8 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM6:
+ postinc = &registers[Rreg_index[opcode >> 12 & 0x0f]];
+ address += *postinc;
+ break;
+ case RD0:
+ postinc = &registers[Rreg_index[disp & 0x0f]];
+ address += *postinc;
+ break;
+ case RD2:
+ postinc = &registers[Rreg_index[disp >> 4 & 0x0f]];
+ address += *postinc;
+ break;
+
+ case SD8:
+ case SIMM8:
+ address += (int32_t) (int8_t) (disp & 0xff);
+ break;
+ case SD16:
+ address += (int32_t) (int16_t) (disp & 0xffff);
+ break;
+ case SD24:
+ tmp = disp << 8;
+ asm("asr 8,%0" : "=r"(tmp) : "0"(tmp));
+ address += tmp;
+ break;
+ case SIMM4_2:
+ tmp = opcode >> 4 & 0x0f;
+ tmp <<= 28;
+ asm("asr 28,%0" : "=r"(tmp) : "0"(tmp));
+ address += tmp;
+ break;
+ case IMM24:
+ address += disp & 0x00ffffff;
+ break;
+ case IMM32:
+ case IMM32_HIGH8:
+ address += disp;
+ break;
+ default:
+ return 0;
+ }
+ } while ((params >>= 8));
+
+ *_address = (void *) address;
+ *_postinc = postinc;
+ return 1;
+}
+
+/*
+ * determine the register that is acting as source/dest
+ */
+static int misalignment_reg(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ unsigned long **_register)
+{
+ params &= 0x7fffffff;
+
+ if (params & 0xffffff00)
+ return 0;
+
+ switch (params & 0xff) {
+ case DM0:
+ *_register = &registers[Dreg_index[opcode & 0x03]];
+ break;
+ case DM1:
+ *_register = &registers[Dreg_index[opcode >> 2 & 0x03]];
+ break;
+ case DM2:
+ *_register = &registers[Dreg_index[opcode >> 4 & 0x03]];
+ break;
+ case AM0:
+ *_register = &registers[Areg_index[opcode & 0x03]];
+ break;
+ case AM1:
+ *_register = &registers[Areg_index[opcode >> 2 & 0x03]];
+ break;
+ case AM2:
+ *_register = &registers[Areg_index[opcode >> 4 & 0x03]];
+ break;
+ case RM0:
+ *_register = &registers[Rreg_index[opcode & 0x0f]];
+ break;
+ case RM1:
+ *_register = &registers[Rreg_index[opcode >> 2 & 0x0f]];
+ break;
+ case RM2:
+ *_register = &registers[Rreg_index[opcode >> 4 & 0x0f]];
+ break;
+ case RM4:
+ *_register = &registers[Rreg_index[opcode >> 8 & 0x0f]];
+ break;
+ case RM6:
+ *_register = &registers[Rreg_index[opcode >> 12 & 0x0f]];
+ break;
+ case RD0:
+ *_register = &registers[Rreg_index[disp & 0x0f]];
+ break;
+ case RD2:
+ *_register = &registers[Rreg_index[disp >> 4 & 0x0f]];
+ break;
+ case SP:
+ *_register = &registers[REG_SP >> 2];
+ break;
+
+ default:
+ return 0;
+ }
+
+ return 1;
+}
diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c
new file mode 100644
index 000000000000..31c9d27a75ae
--- /dev/null
+++ b/arch/mn10300/mm/mmu-context.c
@@ -0,0 +1,80 @@
+/* MN10300 MMU context allocation and management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+/*
+ * list of the MMU contexts last allocated on each CPU
+ */
+unsigned long mmu_context_cache[NR_CPUS] = {
+ [0 ... NR_CPUS - 1] = MMU_CONTEXT_FIRST_VERSION * 2 - 1,
+};
+
+/*
+ * flush the specified TLB entry
+ */
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ unsigned long pteu, cnx, flags;
+
+ addr &= PAGE_MASK;
+
+ /* make sure the context doesn't migrate and defend against
+ * interference from vmalloc'd regions */
+ local_irq_save(flags);
+
+ cnx = mm_context(vma->vm_mm);
+
+ if (cnx != MMU_NO_CONTEXT) {
+ pteu = addr | (cnx & 0x000000ffUL);
+ IPTEU = pteu;
+ DPTEU = pteu;
+ if (IPTEL & xPTEL_V)
+ IPTEL = 0;
+ if (DPTEL & xPTEL_V)
+ DPTEL = 0;
+ }
+
+ local_irq_restore(flags);
+}
+
+/*
+ * preemptively set a TLB entry
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+ unsigned long pteu, ptel, cnx, flags;
+
+ addr &= PAGE_MASK;
+ ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
+
+ /* make sure the context doesn't migrate and defend against
+ * interference from vmalloc'd regions */
+ local_irq_save(flags);
+
+ cnx = mm_context(vma->vm_mm);
+
+ if (cnx != MMU_NO_CONTEXT) {
+ pteu = addr | (cnx & 0x000000ffUL);
+ if (!(pte_val(pte) & _PAGE_NX)) {
+ IPTEU = pteu;
+ if (IPTEL & xPTEL_V)
+ IPTEL = ptel;
+ }
+ DPTEU = pteu;
+ if (DPTEL & xPTEL_V)
+ DPTEL = ptel;
+ }
+
+ local_irq_restore(flags);
+}
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
new file mode 100644
index 000000000000..a477038752ba
--- /dev/null
+++ b/arch/mn10300/mm/pgtable.c
@@ -0,0 +1,197 @@
+/* MN10300 Page table management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/spinlock.h>
+#include <linux/quicklist.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+void show_mem(void)
+{
+ unsigned long i;
+ int free = 0, total = 0, reserved = 0, shared = 0;
+
+ int cached = 0;
+ printk(KERN_INFO "Mem-info:\n");
+ show_free_areas();
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map + i))
+ reserved++;
+ else if (PageSwapCache(mem_map + i))
+ cached++;
+ else if (!page_count(mem_map + i))
+ free++;
+ else
+ shared += page_count(mem_map + i) - 1;
+ }
+ printk(KERN_INFO "%d pages of RAM\n", total);
+ printk(KERN_INFO "%d free pages\n", free);
+ printk(KERN_INFO "%d reserved pages\n", reserved);
+ printk(KERN_INFO "%d pages shared\n", shared);
+ printk(KERN_INFO "%d pages swap cached\n", cached);
+}
+
+/*
+ * Associate a large virtual page frame with a given physical page frame
+ * and protection flags for that frame. pfn is for the base of the page,
+ * vaddr is what the page gets mapped to - both must be properly aligned.
+ * The pmd must already be instantiated. Assumes PAE mode.
+ */
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */
+ printk(KERN_ERR "set_pmd_pfn: vaddr misaligned\n");
+ return; /* BUG(); */
+ }
+ if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */
+ printk(KERN_ERR "set_pmd_pfn: pfn misaligned\n");
+ return; /* BUG(); */
+ }
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ if (pgd_none(*pgd)) {
+ printk(KERN_ERR "set_pmd_pfn: pgd_none\n");
+ return; /* BUG(); */
+ }
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ set_pmd(pmd, pfn_pmd(pfn, flags));
+ /*
+ * It's enough to flush this one mapping.
+ * (PGE mappings get flushed as well)
+ */
+ __flush_tlb_one(vaddr);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+ if (pte)
+ clear_page(pte);
+ return pte;
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ struct page *pte;
+
+#ifdef CONFIG_HIGHPTE
+ pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0);
+#else
+ pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+#endif
+ if (pte)
+ clear_highpage(pte);
+ return pte;
+}
+
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * If the locking proves to be non-performant, a ticketing scheme with
+ * checks at dup_mmap(), exec(), and other mmlist addition points
+ * could be used. The locking scheme was chosen on the basis of
+ * manfred's recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+struct page *pgd_list;
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+ struct page *page = virt_to_page(pgd);
+ page->index = (unsigned long) pgd_list;
+ if (pgd_list)
+ set_page_private(pgd_list, (unsigned long) &page->index);
+ pgd_list = page;
+ set_page_private(page, (unsigned long) &pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+ struct page *next, **pprev, *page = virt_to_page(pgd);
+ next = (struct page *) page->index;
+ pprev = (struct page **) page_private(page);
+ *pprev = next;
+ if (next)
+ set_page_private(next, (unsigned long) pprev);
+}
+
+void pgd_ctor(void *pgd)
+{
+ unsigned long flags;
+
+ if (PTRS_PER_PMD == 1)
+ spin_lock_irqsave(&pgd_lock, flags);
+
+ memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
+ swapper_pg_dir + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+
+ if (PTRS_PER_PMD > 1)
+ return;
+
+ pgd_list_add(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+ memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+}
+
+/* never called when PTRS_PER_PMD > 1 */
+void pgd_dtor(void *pgd)
+{
+ unsigned long flags; /* can be called from interrupt context */
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ pgd_list_del(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ return quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ quicklist_free(0, pgd_dtor, pgd);
+}
+
+void __init pgtable_cache_init(void)
+{
+}
+
+void check_pgt_cache(void)
+{
+ quicklist_trim(0, pgd_dtor, 25, 16);
+}
diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S
new file mode 100644
index 000000000000..789208094e98
--- /dev/null
+++ b/arch/mn10300/mm/tlb-mn10300.S
@@ -0,0 +1,207 @@
+###############################################################################
+#
+# TLB loading functions
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/frame.inc>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+###############################################################################
+#
+# Instruction TLB Miss handler entry point
+#
+###############################################################################
+ .type itlb_miss,@function
+ENTRY(itlb_miss)
+ and ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+ movm [d2,d3,a2],(sp)
+#else
+ or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate
+ # register bank
+ nop
+ nop
+ nop
+#endif
+
+ mov (IPTEU),d3
+ mov (PTBR),a2
+ mov d3,d2
+ and 0xffc00000,d2
+ lsr 20,d2
+ mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22]
+ btst _PAGE_VALID,a2
+ beq itlb_miss_fault # jump if doesn't point anywhere
+
+ and ~(PAGE_SIZE-1),a2
+ mov d3,d2
+ and 0x003ff000,d2
+ lsr 10,d2
+ add d2,a2
+ mov (a2),d2 # get pte from PTD[addr 21..12]
+ btst _PAGE_VALID,d2
+ beq itlb_miss_fault # jump if doesn't point to a page
+ # (might be a swap id)
+ bset _PAGE_ACCESSED,(0,a2)
+ and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+itlb_miss_set:
+ mov d2,(IPTEL) # change the TLB
+#ifdef CONFIG_GDBSTUB
+ movm (sp),[d2,d3,a2]
+#endif
+ rti
+
+itlb_miss_fault:
+ mov _PAGE_VALID,d2 # force address error handler to be
+ # invoked
+ bra itlb_miss_set
+
+ .size itlb_miss, . - itlb_miss
+
+###############################################################################
+#
+# Data TLB Miss handler entry point
+#
+###############################################################################
+ .type dtlb_miss,@function
+ENTRY(dtlb_miss)
+ and ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+ movm [d2,d3,a2],(sp)
+#else
+ or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate
+ # register bank
+ nop
+ nop
+ nop
+#endif
+
+ mov (DPTEU),d3
+ mov (PTBR),a2
+ mov d3,d2
+ and 0xffc00000,d2
+ lsr 20,d2
+ mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22]
+ btst _PAGE_VALID,a2
+ beq dtlb_miss_fault # jump if doesn't point anywhere
+
+ and ~(PAGE_SIZE-1),a2
+ mov d3,d2
+ and 0x003ff000,d2
+ lsr 10,d2
+ add d2,a2
+ mov (a2),d2 # get pte from PTD[addr 21..12]
+ btst _PAGE_VALID,d2
+ beq dtlb_miss_fault # jump if doesn't point to a page
+ # (might be a swap id)
+ bset _PAGE_ACCESSED,(0,a2)
+ and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+dtlb_miss_set:
+ mov d2,(DPTEL) # change the TLB
+#ifdef CONFIG_GDBSTUB
+ movm (sp),[d2,d3,a2]
+#endif
+ rti
+
+dtlb_miss_fault:
+ mov _PAGE_VALID,d2 # force address error handler to be
+ # invoked
+ bra dtlb_miss_set
+ .size dtlb_miss, . - dtlb_miss
+
+###############################################################################
+#
+# Instruction TLB Address Error handler entry point
+#
+###############################################################################
+ .type itlb_aerror,@function
+ENTRY(itlb_aerror)
+ and ~EPSW_NMID,epsw
+ add -4,sp
+ SAVE_ALL
+ add -4,sp # need to pass three params
+
+ # calculate the fault code
+ movhu (MMUFCR_IFC),d1
+ or 0x00010000,d1 # it's an instruction fetch
+
+ # determine the page address
+ mov (IPTEU),a2
+ mov a2,d0
+ and PAGE_MASK,d0
+ mov d0,(12,sp)
+
+ clr d0
+ mov d0,(IPTEL)
+
+ and ~EPSW_NMID,epsw
+ or EPSW_IE,epsw
+ mov fp,d0
+ call do_page_fault[],0 # do_page_fault(regs,code,addr
+
+ jmp ret_from_exception
+ .size itlb_aerror, . - itlb_aerror
+
+###############################################################################
+#
+# Data TLB Address Error handler entry point
+#
+###############################################################################
+ .type dtlb_aerror,@function
+ENTRY(dtlb_aerror)
+ and ~EPSW_NMID,epsw
+ add -4,sp
+ mov d1,(sp)
+
+ movhu (MMUFCR_DFC),d1 # is it the initial valid write
+ # to this page?
+ and MMUFCR_xFC_INITWR,d1
+ beq dtlb_pagefault # jump if not
+
+ mov (DPTEL),d1 # set the dirty bit
+ # (don't replace with BSET!)
+ or _PAGE_DIRTY,d1
+ mov d1,(DPTEL)
+ mov (sp),d1
+ add 4,sp
+ rti
+
+ ALIGN
+dtlb_pagefault:
+ mov (sp),d1
+ SAVE_ALL
+ add -4,sp # need to pass three params
+
+ # calculate the fault code
+ movhu (MMUFCR_DFC),d1
+
+ # determine the page address
+ mov (DPTEU),a2
+ mov a2,d0
+ and PAGE_MASK,d0
+ mov d0,(12,sp)
+
+ clr d0
+ mov d0,(DPTEL)
+
+ and ~EPSW_NMID,epsw
+ or EPSW_IE,epsw
+ mov fp,d0
+ call do_page_fault[],0 # do_page_fault(regs,code,addr
+
+ jmp ret_from_exception
+ .size dtlb_aerror, . - dtlb_aerror
diff --git a/arch/mn10300/oprofile/Kconfig b/arch/mn10300/oprofile/Kconfig
new file mode 100644
index 000000000000..19d37730b664
--- /dev/null
+++ b/arch/mn10300/oprofile/Kconfig
@@ -0,0 +1,23 @@
+
+menu "Profiling support"
+ depends on EXPERIMENTAL
+
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+
+config OPROFILE
+ tristate "OProfile system profiling (EXPERIMENTAL)"
+ depends on PROFILING
+ help
+ OProfile is a profiling system capable of profiling the
+ whole system, include the kernel, kernel modules, libraries,
+ and applications.
+
+ If unsure, say N.
+
+endmenu
+
diff --git a/arch/mn10300/oprofile/Makefile b/arch/mn10300/oprofile/Makefile
new file mode 100644
index 000000000000..918dbe60ebb6
--- /dev/null
+++ b/arch/mn10300/oprofile/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the MN10300-specific profiling code
+#
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) op_model_null.o
+
diff --git a/arch/mn10300/oprofile/op_model_null.c b/arch/mn10300/oprofile/op_model_null.c
new file mode 100644
index 000000000000..cd4ab374bc4f
--- /dev/null
+++ b/arch/mn10300/oprofile/op_model_null.c
@@ -0,0 +1,22 @@
+/* Null profiling driver
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * Licence. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+ return -ENODEV;
+}
+
+void oprofile_arch_exit(void)
+{
+}
+
diff --git a/arch/mn10300/proc-mn103e010/Makefile b/arch/mn10300/proc-mn103e010/Makefile
new file mode 100644
index 000000000000..ac2c9784cd21
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the MN103E010 processor chip specific code
+#
+obj-y := proc-init.o
+
diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c
new file mode 100644
index 000000000000..9a482efafa82
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/proc-init.c
@@ -0,0 +1,75 @@
+/* MN103E010 Processor initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <asm/rtc.h>
+
+/*
+ * initialise the on-silicon processor peripherals
+ */
+asmlinkage void __init processor_init(void)
+{
+ int loop;
+
+ /* set up the exception table first */
+ for (loop = 0x000; loop < 0x400; loop += 8)
+ __set_intr_stub(loop, __common_exception);
+
+ __set_intr_stub(EXCEP_ITLBMISS, itlb_miss);
+ __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss);
+ __set_intr_stub(EXCEP_IAERROR, itlb_aerror);
+ __set_intr_stub(EXCEP_DAERROR, dtlb_aerror);
+ __set_intr_stub(EXCEP_BUSERROR, raw_bus_error);
+ __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault);
+ __set_intr_stub(EXCEP_SYSCALL0, system_call);
+
+ __set_intr_stub(EXCEP_NMI, nmi_handler);
+ __set_intr_stub(EXCEP_WDT, nmi_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler);
+
+ IVAR0 = EXCEP_IRQ_LEVEL0;
+ IVAR1 = EXCEP_IRQ_LEVEL1;
+ IVAR2 = EXCEP_IRQ_LEVEL2;
+ IVAR3 = EXCEP_IRQ_LEVEL3;
+ IVAR4 = EXCEP_IRQ_LEVEL4;
+ IVAR5 = EXCEP_IRQ_LEVEL5;
+ IVAR6 = EXCEP_IRQ_LEVEL6;
+
+ mn10300_dcache_flush_inv();
+ mn10300_icache_inv();
+
+ /* disable all interrupts and set to priority 6 (lowest) */
+ for (loop = 0; loop < NR_IRQS; loop++)
+ GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+
+ /* clear the timers */
+ TM0MD = 0;
+ TM1MD = 0;
+ TM2MD = 0;
+ TM3MD = 0;
+ TM4MD = 0;
+ TM5MD = 0;
+ TM6MD = 0;
+ TM6MDA = 0;
+ TM6MDB = 0;
+ TM7MD = 0;
+ TM8MD = 0;
+ TM9MD = 0;
+ TM10MD = 0;
+ TM11MD = 0;
+
+ calibrate_clock();
+}
diff --git a/arch/mn10300/unit-asb2303/Makefile b/arch/mn10300/unit-asb2303/Makefile
new file mode 100644
index 000000000000..03e579fa99d0
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/Makefile
@@ -0,0 +1,6 @@
+###############################################################################
+#
+# Makefile for the ASB2303 board
+#
+###############################################################################
+obj-y := unit-init.o smc91111.o leds.o
diff --git a/arch/mn10300/unit-asb2303/leds.c b/arch/mn10300/unit-asb2303/leds.c
new file mode 100644
index 000000000000..cd4bc78ccfc8
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/leds.c
@@ -0,0 +1,52 @@
+/* ASB2303 peripheral 7-segment LEDs x1 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <asm/unit/leds.h>
+
+#if 0
+static const u8 asb2303_led_hex_tbl[16] = {
+ 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+ 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+#endif
+
+static const u8 asb2303_led_chase_tbl[6] = {
+ ~0x02, /* top - segA */
+ ~0x04, /* right top - segB */
+ ~0x08, /* right bottom - segC */
+ ~0x10, /* bottom - segD */
+ ~0x20, /* left bottom - segE */
+ ~0x40, /* left top - segF */
+};
+
+static unsigned asb2303_led_chase;
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+ ASB2303_GPIO0DEF = 0x5555; /* configure as an output port */
+ ASB2303_7SEGLEDS = 0x6d; /* triple horizontal bar */
+}
+
+void peripheral_leds_led_chase(void)
+{
+ ASB2303_GPIO0DEF = 0x5555; /* configure as an output port */
+ ASB2303_7SEGLEDS = asb2303_led_chase_tbl[asb2303_led_chase];
+ asb2303_led_chase++;
+ if (asb2303_led_chase >= 6)
+ asb2303_led_chase = 0;
+}
diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c
new file mode 100644
index 000000000000..30875dd65631
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/smc91111.c
@@ -0,0 +1,52 @@
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/timex.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/unit/smc91111.h>
+
+static struct resource smc91c111_resources[] = {
+ [0] = {
+ .start = SMC91111_BASE,
+ .end = SMC91111_BASE_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SMC91111_IRQ,
+ .end = SMC91111_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91c111_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91c111_resources),
+ .resource = smc91c111_resources,
+};
+
+/*
+ * add platform devices
+ */
+static int __init unit_device_init(void)
+{
+ platform_device_register(&smc91c111_device);
+ return 0;
+}
+
+device_initcall(unit_device_init);
diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c
new file mode 100644
index 000000000000..14b2c817cff8
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/unit-init.c
@@ -0,0 +1,60 @@
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/intctl-regs.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+ /* set up the external interrupts */
+ SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_HILEVEL);
+ SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL);
+ SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL);
+ SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL);
+ SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL);
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+ unsigned int extnum;
+
+ for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+ switch (GET_XIRQ_TRIGGER(extnum)) {
+ case XIRQ_TRIGGER_HILEVEL:
+ case XIRQ_TRIGGER_LOWLEVEL:
+ set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+ break;
+ default:
+ break;
+ }
+ }
+}
diff --git a/arch/mn10300/unit-asb2305/Makefile b/arch/mn10300/unit-asb2305/Makefile
new file mode 100644
index 000000000000..0551022225b3
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/Makefile
@@ -0,0 +1,8 @@
+###############################################################################
+#
+# Makefile for the ASB2305 board
+#
+###############################################################################
+obj-y := unit-init.o leds.o
+
+obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o pci-iomap.o
diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c
new file mode 100644
index 000000000000..e99dcc9cee1a
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/leds.c
@@ -0,0 +1,124 @@
+/* ASB2305 Peripheral 7-segment LEDs x4 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/cpu/intctl-regs.h>
+#include <asm/cpu/rtc-regs.h>
+#include <asm/unit/leds.h>
+
+static const u8 asb2305_led_hex_tbl[16] = {
+ 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+ 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+
+static const u32 asb2305_led_chase_tbl[6] = {
+ ~0x02020202, /* top - segA */
+ ~0x04040404, /* right top - segB */
+ ~0x08080808, /* right bottom - segC */
+ ~0x10101010, /* bottom - segD */
+ ~0x20202020, /* left bottom - segE */
+ ~0x40404040, /* left top - segF */
+};
+
+static unsigned asb2305_led_chase;
+
+void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(val/1000) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/100) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/10) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[val % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(val/1000) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/100) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/10) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[val % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(code/0x100) % 0x10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(code/0x10) % 0x10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[code % 0x10];
+ leds |= 0x6d010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_minssecs(unsigned int time, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(time/600) % 6];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(time/60) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(time/10) % 6];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[time % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_rtc(void)
+{
+ unsigned int clock;
+ u8 mins, secs;
+
+ mins = RTMCR;
+ secs = RTSCR;
+
+ clock = ((mins & 0xf0) >> 4);
+ clock *= 10;
+ clock += (mins & 0x0f);
+ clock *= 6;
+
+ clock += ((secs & 0xf0) >> 4);
+ clock *= 10;
+ clock += (secs & 0x0f);
+
+ peripheral_leds7x4_display_minssecs(clock, 0);
+}
+
+void peripheral_leds_led_chase(void)
+{
+ ASB2305_7SEGLEDS = asb2305_led_chase_tbl[asb2305_led_chase];
+ asb2305_led_chase++;
+ if (asb2305_led_chase >= 6)
+ asb2305_led_chase = 0;
+}
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
new file mode 100644
index 000000000000..d100ca788468
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -0,0 +1,303 @@
+/* ASB2305 PCI resource stuff
+ *
+ * Copyright (C) 2001 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/pci-i386.c
+ * - Copyright 1997--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include "pci-asb2305.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+#if 0
+ struct pci_dev *dev = data;
+
+ printk(KERN_DEBUG
+ "### PCIBIOS_ALIGN_RESOURCE(%s,,{%08lx-%08lx,%08lx},%lx)\n",
+ pci_name(dev),
+ res->start,
+ res->end,
+ res->flags,
+ size
+ );
+#endif
+
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long start = res->start;
+
+ if (start & 0x300) {
+ start = (start + 0x3ff) & ~0x3ff;
+ res->start = start;
+ }
+ }
+}
+
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ int idx;
+ struct resource *r, *pr;
+
+ /* Depth-First Search on bus tree */
+ list_for_each_entry(bus, bus_list, node) {
+ dev = bus->self;
+ if (dev) {
+ for (idx = PCI_BRIDGE_RESOURCES;
+ idx < PCI_NUM_RESOURCES;
+ idx++) {
+ r = &dev->resource[idx];
+ if (!r->flags)
+ continue;
+ pr = pci_find_parent_resource(dev, r);
+ if (!r->start ||
+ !pr ||
+ request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI:"
+ " Cannot allocate resource"
+ " region %d of bridge %s\n",
+ idx, pci_name(dev));
+ /* Something is wrong with the region.
+ * Invalidate the resource to prevent
+ * child resource allocations in this
+ * range. */
+ r->flags = 0;
+ }
+ }
+ }
+ pcibios_allocate_bus_resources(&bus->children);
+ }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r, *pr;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for (idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start) /* Address not assigned */
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled) {
+ DBG("PCI[%s]: Resource %08lx-%08lx"
+ " (f=%lx, d=%d, p=%d)\n",
+ pci_name(dev), r->start, r->end, r->flags,
+ disabled, pass);
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI:"
+ " Cannot allocate resource"
+ " region %d of device %s\n",
+ idx, pci_name(dev));
+ /* We'll assign a new address later */
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+ if (!pass) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & IORESOURCE_ROM_ENABLE) {
+ /* Turn the ROM off, leave the resource region,
+ * but keep it unregistered. */
+ u32 reg;
+ DBG("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_read_config_dword(
+ dev, dev->rom_base_reg, &reg);
+ pci_write_config_dword(
+ dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+ }
+}
+
+static int __init pcibios_assign_resources(void)
+{
+ struct pci_dev *dev = NULL;
+ struct resource *r, *pr;
+
+ if (!(pci_probe & PCI_ASSIGN_ROMS)) {
+ /* Try to use BIOS settings for ROMs, otherwise let
+ pci_assign_unassigned_resources() allocate the new
+ addresses. */
+ for_each_pci_dev(dev) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (!r->flags || !r->start)
+ continue;
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+
+ pci_assign_unassigned_resources();
+
+ return 0;
+}
+
+fs_initcall(pcibios_assign_resources);
+
+void __init pcibios_resource_survey(void)
+{
+ DBG("PCI: Allocating resources\n");
+ pcibios_allocate_bus_resources(&pci_root_buses);
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+}
+
+int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+
+ for (idx = 0; idx < 6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1 << idx)))
+ continue;
+
+ r = &dev->resource[idx];
+
+ if (!r->start && r->end) {
+ printk(KERN_ERR
+ "PCI: Device %s not available because of"
+ " resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+
+ if (dev->resource[PCI_ROM_RESOURCE].start)
+ cmd |= PCI_COMMAND_MEMORY;
+
+ if (cmd != old_cmd)
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ return 0;
+}
+
+/*
+ * If we set up a device for bus mastering, we need to check the latency
+ * timer as certain crappy BIOSes forget to set it properly.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+ u8 lat;
+
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+ if (lat < 16)
+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+ else if (lat > pcibios_max_latency)
+ lat = pcibios_max_latency;
+ else
+ return;
+
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ unsigned long prot;
+
+ /* Leave vm_pgoff as-is, the PCI space address is the physical
+ * address on this platform.
+ */
+ vma->vm_flags |= VM_LOCKED | VM_IO;
+
+ prot = pgprot_val(vma->vm_page_prot);
+ prot &= ~_PAGE_CACHE;
+ vma->vm_page_prot = __pgprot(prot);
+
+ /* Write-combine setting is ignored */
+ if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
+
+ return 0;
+}
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
new file mode 100644
index 000000000000..84634fa3bce6
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
@@ -0,0 +1,82 @@
+/* ASB2305 Arch-specific PCI declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-i386.h: (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _PCI_ASB2305_H
+#define _PCI_ASB2305_H
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 1
+#define PCI_PROBE_CONF1 2
+#define PCI_PROBE_CONF2 4
+#define PCI_NO_SORT 0x100
+#define PCI_BIOS_SORT 0x200
+#define PCI_NO_CHECKS 0x400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+
+extern unsigned int pci_probe;
+
+/* pci-asb2305.c */
+
+extern unsigned int pcibios_max_latency;
+
+extern void pcibios_resource_survey(void);
+extern int pcibios_enable_resources(struct pci_dev *dev, int mask);
+
+/* pci.c */
+
+extern int pcibios_last_bus;
+extern struct pci_bus *pci_root_bus;
+extern struct pci_ops *pci_root_ops;
+
+extern struct irq_routing_table *pcibios_get_irq_routing_table(void);
+extern int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+/* pci-irq.c */
+
+struct irq_info {
+ u8 bus, devfn; /* Bus, device and function */
+ struct {
+ u8 link; /* IRQ line ID, chipset dependent,
+ * 0=not routed */
+ u16 bitmap; /* Available IRQs */
+ } __attribute__((packed)) irq[4];
+ u8 slot; /* Slot number, 0=onboard */
+ u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+ u32 signature; /* PIRQ_SIGNATURE should be here */
+ u16 version; /* PIRQ_VERSION */
+ u16 size; /* Table size in bytes */
+ u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
+ u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
+ u32 miniport_data; /* Crap */
+ u8 rfu[11];
+ u8 checksum; /* Modulo 256 checksum must give zero */
+ struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern void pcibios_irq_init(void);
+extern void pcibios_fixup_irqs(void);
+extern void pcibios_enable_irq(struct pci_dev *dev);
+
+#endif /* PCI_ASB2305_H */
diff --git a/arch/mn10300/unit-asb2305/pci-iomap.c b/arch/mn10300/unit-asb2305/pci-iomap.c
new file mode 100644
index 000000000000..dbceae4307da
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-iomap.c
@@ -0,0 +1,31 @@
+/* ASB2305 PCI I/O mapping handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/module.h>
+
+/*
+ * Create a virtual mapping cookie for a PCI BAR (memory or IO)
+ */
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len || !start)
+ return NULL;
+
+ if ((flags & IORESOURCE_IO) || (flags & IORESOURCE_MEM))
+ return (void __iomem *) start;
+
+ return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c
new file mode 100644
index 000000000000..58cfb44f0acf
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-irq.c
@@ -0,0 +1,51 @@
+/* PCI IRQ routing on the MN103E010 based ASB2305
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * This is simple: All PCI interrupts route through the CPU's XIRQ1 pin [IRQ 35]
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/io.h>