aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86_64/Kconfig30
-rw-r--r--arch/x86_64/Kconfig.debug2
-rw-r--r--arch/x86_64/kernel/Makefile2
-rw-r--r--arch/x86_64/kernel/io_apic.c2
-rw-r--r--arch/x86_64/kernel/pci-dma.c2
-rw-r--r--arch/x86_64/kernel/setup.c2
-rw-r--r--drivers/char/agp/Kconfig4
-rw-r--r--drivers/char/agp/amd64-agp.c4
-rw-r--r--drivers/scsi/aacraid/comminit.c5
-rw-r--r--include/asm-x86_64/pci.h2
-rw-r--r--include/asm-x86_64/proto.h2
11 files changed, 31 insertions, 26 deletions
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index fc75275d8c72..e8c52a1eec06 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -386,24 +386,26 @@ config HPET_EMULATE_RTC
bool "Provide RTC interrupt"
depends on HPET_TIMER && RTC=y
-config GART_IOMMU
- bool "K8 GART IOMMU support"
+# Mark as embedded because too many people got it wrong.
+# The code disables itself when not needed.
+config IOMMU
+ bool "IOMMU support" if EMBEDDED
default y
select SWIOTLB
select AGP
depends on PCI
help
- Support for hardware IOMMU in AMD's Opteron/Athlon64 Processors
- and for the bounce buffering software IOMMU.
- Needed to run systems with more than 3GB of memory properly with
- 32-bit PCI devices that do not support DAC (Double Address Cycle).
- The IOMMU can be turned off at runtime with the iommu=off parameter.
- Normally the kernel will take the right choice by itself.
- This option includes a driver for the AMD Opteron/Athlon64 IOMMU
- northbridge and a software emulation used on other systems without
- hardware IOMMU. If unsure, say Y.
-
-# need this always selected by GART_IOMMU for the VIA workaround
+ Support for full DMA access of devices with 32bit memory access only
+ on systems with more than 3GB. This is usually needed for USB,
+ sound, many IDE/SATA chipsets and some other devices.
+ Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
+ based IOMMU and a software bounce buffer based IOMMU used on Intel
+ systems and as fallback.
+ The code is only active when needed (enough memory and limited
+ device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
+ too.
+
+# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
bool
@@ -503,7 +505,7 @@ config REORDER
config K8_NB
def_bool y
- depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA)
+ depends on AGP_AMD64 || IOMMU || (PCI && NUMA)
endmenu
diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug
index ea31b4c62105..0226f08be874 100644
--- a/arch/x86_64/Kconfig.debug
+++ b/arch/x86_64/Kconfig.debug
@@ -13,7 +13,7 @@ config DEBUG_RODATA
If in doubt, say "N".
config IOMMU_DEBUG
- depends on GART_IOMMU && DEBUG_KERNEL
+ depends on IOMMU && DEBUG_KERNEL
bool "Enable IOMMU debugging"
help
Force the IOMMU to on even when you have less than 4GB of
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index f927d11065fe..fd106bdddd6d 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_PM) += suspend.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend_asm.o
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_GART_IOMMU) += pci-gart.o aperture.o
+obj-$(CONFIG_IOMMU) += pci-gart.o aperture.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 519cd4e6f9e7..c768d8a036d0 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -319,7 +319,7 @@ void __init check_ioapic(void)
vendor &= 0xffff;
switch (vendor) {
case PCI_VENDOR_ID_VIA:
-#ifdef CONFIG_GART_IOMMU
+#ifdef CONFIG_IOMMU
if ((end_pfn > MAX_DMA32_PFN ||
force_iommu) &&
!iommu_aperture_allowed) {
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c
index 117bcebe9ebc..33926c367250 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@@ -266,7 +266,7 @@ __init int iommu_setup(char *p)
swiotlb = 1;
#endif
-#ifdef CONFIG_GART_IOMMU
+#ifdef CONFIG_IOMMU
gart_parse_options(p);
#endif
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 9dadb9a1db2a..816203d57e11 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -702,7 +702,7 @@ void __init setup_arch(char **cmdline_p)
e820_setup_gap();
-#ifdef CONFIG_GART_IOMMU
+#ifdef CONFIG_IOMMU
iommu_hole_init();
#endif
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 46685a540772..9826a399fa02 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -55,9 +55,9 @@ config AGP_AMD
X on AMD Irongate, 761, and 762 chipsets.
config AGP_AMD64
- tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU
+ tristate "AMD Opteron/Athlon64 on-CPU GART support" if !IOMMU
depends on AGP && X86
- default y if GART_IOMMU
+ default y if IOMMU
help
This option gives you AGP support for the GLX component of
X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 229d015757f9..f690ee8cb732 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -292,7 +292,7 @@ static int __devinit aperture_valid(u64 aper, u32 size)
/*
* W*s centric BIOS sometimes only set up the aperture in the AGP
* bridge, not the northbridge. On AMD64 this is handled early
- * in aperture.c, but when GART_IOMMU is not enabled or we run
+ * in aperture.c, but when IOMMU is not enabled or we run
* on a 32bit kernel this needs to be redone.
* Unfortunately it is impossible to fix the aperture here because it's too late
* to allocate that much memory. But at least error out cleanly instead of
@@ -775,7 +775,7 @@ static void __exit agp_amd64_cleanup(void)
/* On AMD64 the PCI driver needs to initialize this driver early
for the IOMMU, so it has to be called via a backdoor. */
-#ifndef CONFIG_GART_IOMMU
+#ifndef CONFIG_IOMMU
module_init(agp_amd64_init);
module_exit(agp_amd64_cleanup);
#endif
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 35b0a6ebd3f5..7cea514e810a 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -104,8 +104,11 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
* always true on real computers. It also has some slight problems
* with the GART on x86-64. I've btw never tried DMA from PCI space
* on this platform but don't be surprised if its problematic.
+ * [AK: something is very very wrong when a driver tests this symbol.
+ * Someone should figure out what the comment writer really meant here and fix
+ * the code. Or just remove that bad code. ]
*/
-#ifndef CONFIG_GART_IOMMU
+#ifndef CONFIG_IOMMU
if ((num_physpages << (PAGE_SHIFT - 12)) <= AAC_MAX_HOSTPHYSMEMPAGES) {
init->HostPhysMemPages =
cpu_to_le32(num_physpages << (PAGE_SHIFT-12));
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
index 2db0620d5449..3374d34c4acd 100644
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -52,7 +52,7 @@ extern int iommu_setup(char *opt);
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#ifdef CONFIG_GART_IOMMU
+#ifdef CONFIG_IOMMU
/*
* x86-64 always supports DAC, but sometimes it is useful to force
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
index 8abf2a43c944..1064533e0959 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86_64/proto.h
@@ -116,7 +116,7 @@ extern int skip_ioapic_setup;
extern int acpi_ht;
extern int acpi_disabled;
-#ifdef CONFIG_GART_IOMMU
+#ifdef CONFIG_IOMMU
extern int fallback_aper_order;
extern int fallback_aper_force;
extern int iommu_aperture;