diff options
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 9 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 189 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_i2c.c | 4 |
3 files changed, 198 insertions, 4 deletions
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0de97adc4fcb..86a1ad86aa7b 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -360,9 +360,17 @@ #define VLV_IOSF_DATA (VLV_DISPLAY_BASE + 0x2104) #define VLV_IOSF_ADDR (VLV_DISPLAY_BASE + 0x2108) +/* See configdb bunit SB addr map */ +#define BUNIT_REG_BISOC 0x11 + #define PUNIT_OPCODE_REG_READ 6 #define PUNIT_OPCODE_REG_WRITE 7 +#define PUNIT_REG_DSPFREQ 0x36 +#define DSPFREQSTAT_SHIFT 30 +#define DSPFREQSTAT_MASK (0x3 << DSPFREQSTAT_SHIFT) +#define DSPFREQGUAR_SHIFT 14 +#define DSPFREQGUAR_MASK (0x3 << DSPFREQGUAR_SHIFT) #define PUNIT_REG_PWRGT_CTRL 0x60 #define PUNIT_REG_PWRGT_STATUS 0x61 #define PUNIT_CLK_GATE 1 @@ -425,6 +433,7 @@ #define DSI_PLL_N1_DIV_MASK (3 << 16) #define DSI_PLL_M1_DIV_SHIFT 0 #define DSI_PLL_M1_DIV_MASK (0x1ff << 0) +#define CCK_DISPLAY_CLOCK_CONTROL 0x6b /* * DPIO - a special bus for various display related registers to hide behind diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f34252d134b6..c034413a1584 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3894,6 +3894,181 @@ static void i9xx_pfit_enable(struct intel_crtc *crtc) I915_WRITE(BCLRPAT(crtc->pipe), 0); } +static int valleyview_get_vco(struct drm_i915_private *dev_priv) +{ + int vco; + + switch (dev_priv->mem_freq) { + default: + case 800: + vco = 800; + break; + case 1066: + vco = 1600; + break; + case 1333: + vco = 2000; + break; + } + + return vco; +} + +/* Adjust CDclk dividers to allow high res or save power if possible */ +static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 val, cmd; + + if (cdclk >= 320) /* jump to highest voltage for 400MHz too */ + cmd = 2; + else if (cdclk == 266) + cmd = 1; + else + cmd = 0; + + mutex_lock(&dev_priv->rps.hw_lock); + val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); + val &= ~DSPFREQGUAR_MASK; + val |= (cmd << DSPFREQGUAR_SHIFT); + vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); + if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & + DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), + 50)) { + DRM_ERROR("timed out waiting for CDclk change\n"); + } + mutex_unlock(&dev_priv->rps.hw_lock); + + if (cdclk == 400) { + u32 divider, vco; + + vco = valleyview_get_vco(dev_priv); + divider = ((vco << 1) / cdclk) - 1; + + mutex_lock(&dev_priv->dpio_lock); + /* adjust cdclk divider */ + val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); + val &= ~0xf; + val |= divider; + vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val); + mutex_unlock(&dev_priv->dpio_lock); + } + + mutex_lock(&dev_priv->dpio_lock); + /* adjust self-refresh exit latency value */ + val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC); + val &= ~0x7f; + + /* + * For high bandwidth configs, we set a higher latency in the bunit + * so that the core display fetch happens in time to avoid underruns. + */ + if (cdclk == 400) + val |= 4500 / 250; /* 4.5 usec */ + else + val |= 3000 / 250; /* 3.0 usec */ + vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val); + mutex_unlock(&dev_priv->dpio_lock); + + /* Since we changed the CDclk, we need to update the GMBUSFREQ too */ + intel_i2c_reset(dev); +} + +static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) +{ + int cur_cdclk, vco; + int divider; + + vco = valleyview_get_vco(dev_priv); + + mutex_lock(&dev_priv->dpio_lock); + divider = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); + mutex_unlock(&dev_priv->dpio_lock); + + divider &= 0xf; + + cur_cdclk = (vco << 1) / (divider + 1); + + return cur_cdclk; +} + +static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv, + int max_pixclk) +{ + int cur_cdclk; + + cur_cdclk = valleyview_cur_cdclk(dev_priv); + + /* + * Really only a few cases to deal with, as only 4 CDclks are supported: + * 200MHz + * 267MHz + * 320MHz + * 400MHz + * So we check to see whether we're above 90% of the lower bin and + * adjust if needed. + */ + if (max_pixclk > 288000) { + return 400; + } else if (max_pixclk > 240000) { + return 320; + } else + return 266; + /* Looks like the 200MHz CDclk freq doesn't work on some configs */ +} + +static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv, + unsigned modeset_pipes, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = dev_priv->dev; + struct intel_crtc *intel_crtc; + int max_pixclk = 0; + + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, + base.head) { + if (modeset_pipes & (1 << intel_crtc->pipe)) + max_pixclk = max(max_pixclk, + pipe_config->adjusted_mode.crtc_clock); + else if (intel_crtc->base.enabled) + max_pixclk = max(max_pixclk, + intel_crtc->config.adjusted_mode.crtc_clock); + } + + return max_pixclk; +} + +static void valleyview_modeset_global_pipes(struct drm_device *dev, + unsigned *prepare_pipes, + unsigned modeset_pipes, + struct intel_crtc_config *pipe_config) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc; + int max_pixclk = intel_mode_max_pixclk(dev_priv, modeset_pipes, + pipe_config); + int cur_cdclk = valleyview_cur_cdclk(dev_priv); + + if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk) + return; + + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, + base.head) + if (intel_crtc->base.enabled) + *prepare_pipes |= (1 << intel_crtc->pipe); +} + +static void valleyview_modeset_global_resources(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int max_pixclk = intel_mode_max_pixclk(dev_priv, 0, NULL); + int cur_cdclk = valleyview_cur_cdclk(dev_priv); + int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk); + + if (req_cdclk != cur_cdclk) + valleyview_set_cdclk(dev, req_cdclk); +} + static void valleyview_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -9318,6 +9493,17 @@ static int __intel_set_mode(struct drm_crtc *crtc, "[modeset]"); } + /* + * See if the config requires any additional preparation, e.g. + * to adjust global state with pipes off. We need to do this + * here so we can get the modeset_pipe updated config for the new + * mode set on this crtc. For other crtcs we need to use the + * adjusted_mode bits in the crtc directly. + */ + if (IS_VALLEYVIEW(dev)) + valleyview_modeset_global_pipes(dev, &prepare_pipes, + modeset_pipes, pipe_config); + for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc) intel_crtc_disable(&intel_crtc->base); @@ -10317,6 +10503,9 @@ static void intel_init_display(struct drm_device *dev) } } else if (IS_G4X(dev)) { dev_priv->display.write_eld = g4x_write_eld; + } else if (IS_VALLEYVIEW(dev)) { + dev_priv->display.modeset_global_resources = + valleyview_modeset_global_resources; } /* Default just returns -ENODEV to indicate unsupported */ diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 2ca17b14b6c1..1263409d00b3 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -87,10 +87,6 @@ static void gmbus_set_freq(struct drm_i915_private *dev_priv) BUG_ON(!IS_VALLEYVIEW(dev_priv->dev)); - /* Skip setting the gmbus freq if BIOS has already programmed it */ - if (I915_READ(GMBUSFREQ_VLV) != 0xA0) - return; - /* Obtain SKU information */ mutex_lock(&dev_priv->dpio_lock); hpll_freq = |