path: root/include
diff options
authorMasanari Iida <standby24x7@gmail.com>2014-02-18 22:54:36 +0900
committerJiri Kosina <jkosina@suse.cz>2014-02-19 14:58:17 +0100
commite227867f12302633737bd2a48a10a9a72c0630cb (patch)
treec1d96c1f4c3d83b7d6fe3b0c15d480d366ccc8f8 /include
parent425529937b6ce37e47120d6b2fb895c5b9910591 (diff)
treewide: Fix typo in Documentation/DocBook
This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'include')
8 files changed, 13 insertions, 13 deletions
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 471f276ce8f7..0145b948b147 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -55,7 +55,7 @@ struct drm_fb_helper_surface_size {
* save the current lut when force-restoring the fbdev for e.g.
* kdbg.
* @fb_probe: Driver callback to allocate and initialize the fbdev info
- * structure. Futhermore it also needs to allocate the drm
+ * structure. Furthermore it also needs to allocate the drm
* framebuffer used to back the fbdev.
* @initial_config: Setup an initial fbdev display configuration
diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h
index 0dca785288cf..39bfd5b89077 100644
--- a/include/linux/hsi/hsi.h
+++ b/include/linux/hsi/hsi.h
@@ -178,7 +178,7 @@ static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv)
* @complete: Transfer completion callback
* @destructor: Destructor to free resources when flushing
* @status: Status of the transfer when completed
- * @actual_len: Actual length of data transfered on completion
+ * @actual_len: Actual length of data transferred on completion
* @channel: Channel were to TX/RX the message
* @ttype: Transfer type (TX if set, RX otherwise)
* @break_frame: if true HSI will send/receive a break frame. Data buffers are
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 552d51efb429..554fde3a3927 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -722,7 +722,7 @@ __kfifo_uint_must_check_helper( \
* kfifo_dma_out_finish - finish a DMA OUT operation
* @fifo: address of the fifo to be used
- * @len: number of bytes transferd
+ * @len: number of bytes transferrd
* This macro finish a DMA OUT operation. The out counter will be updated by
* the len parameter. No error checking will be done.
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index b8809fef61f5..11982d0ce11b 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -35,7 +35,7 @@ struct pipe_buffer {
* @tmp_page: cached released page
* @readers: number of current readers of this pipe
* @writers: number of current writers of this pipe
- * @files: number of struct file refering this pipe (protected by ->i_lock)
+ * @files: number of struct file referring this pipe (protected by ->i_lock)
* @waiting_writers: number of writers blocked waiting for room
* @r_counter: reader counter
* @w_counter: writer counter
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 215b5ea1cb30..cde842513df2 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1951,7 +1951,7 @@ static inline void skb_propagate_pfmemalloc(struct page *page,
- * skb_frag_page - retrieve the page refered to by a paged fragment
+ * skb_frag_page - retrieve the page referred to by a paged fragment
* @frag: the paged fragment
* Returns the &struct page associated with @frag.
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 8c62ba74dd91..8d3a37bc6110 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -234,7 +234,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @mode_bits: flags understood by this controller driver
* @bits_per_word_mask: A mask indicating which values of bits_per_word are
* supported by the driver. Bit n indicates that a bits_per_word n+1 is
- * suported. If set, the SPI core will reject any transfer with an
+ * supported. If set, the SPI core will reject any transfer with an
* unsupported bits_per_word. If not set, this value is simply ignored,
* and it's up to the individual driver to perform any validation.
* @min_speed_hz: Lowest supported transfer speed
@@ -259,7 +259,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @cur_msg: the currently in-flight message
* @cur_msg_prepared: spi_prepare_message was called for the currently
* in-flight message
- * @xfer_completion: used by core tranfer_one_message()
+ * @xfer_completion: used by core transfer_one_message()
* @busy: message pump is busy
* @running: message pump is running
* @rt: whether this queue is set to run as a realtime task
@@ -493,7 +493,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
* @rx_buf: data to be read (dma-safe memory), or NULL
* @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
* @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
- * @tx_nbits: number of bits used for writting. If 0 the default
+ * @tx_nbits: number of bits used for writing. If 0 the default
* (SPI_NBITS_SINGLE) is used.
* @rx_nbits: number of bits used for reading. If 0 the default
* (SPI_NBITS_SINGLE) is used.
@@ -551,7 +551,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
* by the results of previous messages and where the whole transaction
* ends when the chipselect goes intactive.
- * When SPI can transfer in 1x,2x or 4x. It can get this tranfer information
+ * When SPI can transfer in 1x,2x or 4x. It can get this transfer information
* from device through @tx_nbits and @rx_nbits. In Bi-direction, these
* two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x)
* SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer.
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 5e61589fc166..0e7a555cab1e 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -92,7 +92,7 @@ struct usb_configuration;
* @suspend: Notifies functions when the host stops sending USB traffic.
* @resume: Notifies functions when the host restarts USB traffic.
* @get_status: Returns function status as a reply to
- * GetStatus() request when the recepient is Interface.
+ * GetStatus() request when the recipient is Interface.
* @func_suspend: callback to be called when
* SetFeature(FUNCTION_SUSPEND) is reseived
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7ceed99a05bc..6b79bfc98175 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1841,7 +1841,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
* Driver informs U-APSD client support by enabling
* %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
- * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
+ * uapsd parameter in conf_tx() operation. Hardware needs to send the QoS
* Nullfunc frames and stay awake until the service period has ended. To
* utilize U-APSD, dynamic powersave is disabled for voip AC and all frames
* from that AC are transmitted with powersave enabled.
@@ -2047,7 +2047,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
* with the number of frames to be released and which TIDs they are
* to come from. In this case, the driver is responsible for setting
* the EOSP (for uAPSD) and MORE_DATA bits in the released frames,
- * to help the @more_data paramter is passed to tell the driver if
+ * to help the @more_data parameter is passed to tell the driver if
* there is more data on other TIDs -- the TIDs to release frames
* from are ignored since mac80211 doesn't know how many frames the
* buffers for those TIDs contain.
@@ -2592,7 +2592,7 @@ enum ieee80211_roc_type {
* parameters. In the case where the driver buffers some frames for
* sleeping stations mac80211 will use this callback to tell the driver
* to release some frames, either for PS-poll or uAPSD.
- * Note that if the @more_data paramter is %false the driver must check
+ * Note that if the @more_data parameter is %false the driver must check
* if there are more frames on the given TIDs, and if there are more than
* the frames being released then it must still set the more-data bit in
* the frame. If the @more_data parameter is %true, then of course the