aboutsummaryrefslogtreecommitdiff
path: root/include/dt-bindings
diff options
context:
space:
mode:
authorNishanth Menon <nm@ti.com>2014-07-22 10:39:54 -0500
committerTony Lindgren <tony@atomide.com>2014-07-23 01:44:50 -0700
commit23d9cec07c589276561c13b180577c0b87930140 (patch)
treee721dcf07a8c042684b6dd14978ec99e7b45d65d /include/dt-bindings
parentba394f0b6aa7a4a6afe67176da5d29f0ac59c48d (diff)
downloadlinux-linaro-stable-23d9cec07c589276561c13b180577c0b87930140.tar.gz
pinctrl: dra: dt-bindings: Fix pull enable/disable
The DRA74/72 control module pins have a weak pull up and pull down. This is configured by bit offset 17. if BIT(17) is 1, a pull up is selected, else a pull down is selected. However, this pull resisstor is applied based on BIT(16) - PULLUDENABLE - if BIT(18) is *0*, then pull as defined in BIT(17) is applied, else no weak pulls are applied. We defined this in reverse. Reference: Table 18-5 (Description of the pad configuration register bits) in Technical Reference Manual Revision (DRA74x revision Q: SPRUHI2Q Revised June 2014 and DRA72x revision F: SPRUHP2F - Revised June 2014) Fixes: 6e58b8f1daaf1a ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board") Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'include/dt-bindings')
-rw-r--r--include/dt-bindings/pinctrl/dra.h7
1 files changed, 4 insertions, 3 deletions
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
index 002a2855c046..3d33794e4f3e 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -30,7 +30,8 @@
#define MUX_MODE14 0xe
#define MUX_MODE15 0xf
-#define PULL_ENA (1 << 16)
+#define PULL_ENA (0 << 16)
+#define PULL_DIS (1 << 16)
#define PULL_UP (1 << 17)
#define INPUT_EN (1 << 18)
#define SLEWCONTROL (1 << 19)
@@ -38,10 +39,10 @@
#define WAKEUP_EVENT (1 << 25)
/* Active pin states */
-#define PIN_OUTPUT 0
+#define PIN_OUTPUT (0 | PULL_DIS)
#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
-#define PIN_INPUT INPUT_EN
+#define PIN_INPUT (INPUT_EN | PULL_DIS)
#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL)
#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)