Merge tag 'v4.4.52' into linux-linaro-lsk-v4.4

 This is the 4.4.52 stable release

11 files changed, 85 insertions, 25 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index aac1ed3f7bb4..ad8390d2997b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -834,12 +834,30 @@ static void rtl_usb_stop(struct ieee80211_hw *hw)
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 	struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+	struct urb *urb;
 
 	/* should after adapter start and interrupt enable. */
 	set_hal_stop(rtlhal);
 	cancel_work_sync(&rtlpriv->works.fill_h2c_cmd);
 	/* Enable software */
 	SET_USB_STOP(rtlusb);
+
+	/* free pre-allocated URBs from rtl_usb_start() */
+	usb_kill_anchored_urbs(&rtlusb->rx_submitted);
+
+	tasklet_kill(&rtlusb->rx_work_tasklet);
+	cancel_work_sync(&rtlpriv->works.lps_change_work);
+
+	flush_workqueue(rtlpriv->works.rtl_wq);
+
+	skb_queue_purge(&rtlusb->rx_queue);
+
+	while ((urb = usb_get_from_anchor(&rtlusb->rx_cleanup_urbs))) {
+		usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+				urb->transfer_buffer, urb->transfer_dma);
+		usb_free_urb(urb);
+	}
+
 	rtlpriv->cfg->ops->hw_disable(hw);
 }
 
@@ -1073,6 +1091,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 		return -ENOMEM;
 	}
 	rtlpriv = hw->priv;
+	rtlpriv->hw = hw;
 	rtlpriv->usb_data = kzalloc(RTL_USB_MAX_RX_COUNT * sizeof(u32),
 				    GFP_KERNEL);
 	if (!rtlpriv->usb_data)
diff --git a/drivers/platform/goldfish/pdev_bus.c b/drivers/platform/goldfish/pdev_bus.c
index 1f52462f4cdd..dd9ea463c2a4 100644
--- a/drivers/platform/goldfish/pdev_bus.c
+++ b/drivers/platform/goldfish/pdev_bus.c
@@ -157,23 +157,26 @@ static int goldfish_new_pdev(void)
 static irqreturn_t goldfish_pdev_bus_interrupt(int irq, void *dev_id)
 {
 	irqreturn_t ret = IRQ_NONE;
+
 	while (1) {
 		u32 op = readl(pdev_bus_base + PDEV_BUS_OP);
-		switch (op) {
-		case PDEV_BUS_OP_DONE:
-			return IRQ_NONE;
 
+		switch (op) {
 		case PDEV_BUS_OP_REMOVE_DEV:
 			goldfish_pdev_remove();
+			ret = IRQ_HANDLED;
 			break;
 
 		case PDEV_BUS_OP_ADD_DEV:
 			goldfish_new_pdev();
+			ret = IRQ_HANDLED;
 			break;
+
+		case PDEV_BUS_OP_DONE:
+		default:
+			return ret;
 		}
-		ret = IRQ_HANDLED;
 	}
-	return ret;
 }
 
 static int goldfish_pdev_bus_probe(struct platform_device *pdev)
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 5836751b8203..9bb934ed2a7a 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -748,9 +748,23 @@ EXPORT_SYMBOL_GPL(rtc_irq_set_freq);
  */
 static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
 {
+	struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue);
+	struct rtc_time tm;
+	ktime_t now;
+
 	timer->enabled = 1;
+	__rtc_read_time(rtc, &tm);
+	now = rtc_tm_to_ktime(tm);
+
+	/* Skip over expired timers */
+	while (next) {
+		if (next->expires.tv64 >= now.tv64)
+			break;
+		next = timerqueue_iterate_next(next);
+	}
+
 	timerqueue_add(&rtc->timerqueue, &timer->node);
-	if (&timer->node == timerqueue_getnext(&rtc->timerqueue)) {
+	if (!next) {
 		struct rtc_wkalrm alarm;
 		int err;
 		alarm.time = rtc_ktime_to_tm(timer->node.expires);
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e1de4944e0ce..8c4707d5778e 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1615,6 +1615,7 @@ static const struct of_device_id msm_match_table[] = {
 	{ .compatible = "qcom,msm-uartdm" },
 	{}
 };
+MODULE_DEVICE_TABLE(of, msm_match_table);
 
 static struct platform_driver msm_platform_driver = {
 	.remove = msm_serial_remove,
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 5a048b7b92e8..2949289bb3c5 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -244,7 +244,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	struct ci_hdrc_platform_data pdata = {
 		.name		= dev_name(&pdev->dev),
 		.capoffset	= DEF_CAPOFFSET,
-		.flags		= CI_HDRC_SET_NON_ZERO_TTHA,
 	};
 	int ret;
 	const struct of_device_id *of_id;
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 1532cde8a437..7812052dc700 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -99,10 +99,17 @@ static int ark3116_read_reg(struct usb_serial *serial,
 				 usb_rcvctrlpipe(serial->dev, 0),
 				 0xfe, 0xc0, 0, reg,
 				 buf, 1, ARK_TIMEOUT);
-	if (result < 0)
+	if (result < 1) {
+		dev_err(&serial->interface->dev,
+				"failed to read register %u: %d\n",
+				reg, result);
+		if (result >= 0)
+			result = -EIO;
+
 		return result;
-	else
-		return buf[0];
+	}
+
+	return buf[0];
 }
 
 static inline int calc_divisor(int bps)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fe7452f0f38a..33cec50978b8 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -171,6 +171,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
 	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
+	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART interface */
+	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d3d6ec455151..19a98116c2ab 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1807,8 +1807,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	mutex_init(&priv->cfg_lock);
 
-	priv->flags = ASYNC_LOW_LATENCY;
-
 	if (quirk && quirk->port_probe)
 		quirk->port_probe(priv);
 
@@ -2072,6 +2070,20 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		priv->prev_status = status;
 	}
 
+	/* save if the transmitter is empty or not */
+	if (packet[1] & FTDI_RS_TEMT)
+		priv->transmit_empty = 1;
+	else
+		priv->transmit_empty = 0;
+
+	len -= 2;
+	if (!len)
+		return 0;	/* status only */
+
+	/*
+	 * Break and error status must only be processed for packets with
+	 * data payload to avoid over-reporting.
+	 */
 	flag = TTY_NORMAL;
 	if (packet[1] & FTDI_RS_ERR_MASK) {
 		/* Break takes precedence over parity, which takes precedence
@@ -2094,15 +2106,6 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		}
 	}
 
-	/* save if the transmitter is empty or not */
-	if (packet[1] & FTDI_RS_TEMT)
-		priv->transmit_empty = 1;
-	else
-		priv->transmit_empty = 0;
-
-	len -= 2;
-	if (!len)
-		return 0;	/* status only */
 	port->icount.rx += len;
 	ch = packet + 2;
 
@@ -2433,8 +2436,12 @@ static int ftdi_get_modem_status(struct usb_serial_port *port,
 			FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
 			0, priv->interface,
 			buf, len, WDR_TIMEOUT);
-	if (ret < 0) {
+
+	/* NOTE: We allow short responses and handle that below. */
+	if (ret < 1) {
 		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
 		ret = usb_translate_errors(ret);
 		goto out;
 	}
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 97ea52b5cfd4..d17685cc00c9 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1024,6 +1024,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * (can't set it up in mos7840_startup as the structures *
 	 * were not set up at that time.)                        */
 	if (port0->open_ports == 1) {
+		/* FIXME: Buffer never NULL, so URB is not submitted. */
 		if (serial->port[0]->interrupt_in_buffer == NULL) {
 			/* set up interrupt urb */
 			usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
@@ -2119,7 +2120,8 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 static int mos7840_attach(struct usb_serial *serial)
 {
 	if (serial->num_bulk_in < serial->num_ports ||
-			serial->num_bulk_out < serial->num_ports) {
+			serial->num_bulk_out < serial->num_ports ||
+			serial->num_interrupt_in < 1) {
 		dev_err(&serial->interface->dev, "missing endpoints\n");
 		return -ENODEV;
 	}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4b7bfb394a32..64bf258e7e00 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -142,7 +142,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 
 	res = usb_serial_generic_open(tty, port);
-	if (!res)
+	if (res)
 		return res;
 
 	/* Request CTS line state, sometimes during opening the current
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 475e6c31b266..ddfd787c461c 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -232,11 +232,17 @@ static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
 			      0, GET_UART_STATUS_MSR, buf, 1, 100);
-	if (ret < 0)
+	if (ret < 1) {
 		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
 
 	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
 	*status = *buf;
+	ret = 0;
+out:
 	kfree(buf);
 
 	return ret;