path: root/drivers/usb
diff options
authorSergei Shtylyov <sshtylyov@ru.mvista.com>2011-07-06 23:19:38 +0400
committerGreg Kroah-Hartman <gregkh@suse.de>2011-08-08 10:23:14 -0700
commit108786ae74b65d83e4cd9d43bb53cfa75048572f (patch)
tree330da495b873c4dece093194685fa77255161a6f /drivers/usb
parent8a8b5c1b6f911444c0623b991cde497df64cb84c (diff)
EHCI: only power off port if over-current is active
commit 81463c1d707186adbbe534016cd1249edeab0dac upstream. MAX4967 USB power supply chip we use on our boards signals over-current when power is not enabled; once it's enabled, over-current signal returns to normal. That unfortunately caused the endless stream of "over-current change on port" messages. The EHCI root hub code reacts on every over-current signal change with powering off the port -- such change event is generated the moment the port power is enabled, so once enabled the power is immediately cut off. I think we should only cut off power when we're seeing the active over-current signal, so I'm adding such check to that code. I also think that the fact that we've cut off the port power should be reflected in the result of GetPortStatus request immediately, hence I'm adding a PORTSCn register readback after write... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 6ac3976ef3b2..1bcf6ee79bc0 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -758,10 +758,11 @@ static int ehci_hub_control (
* power switching; they're allowed to just limit the
* current. khubd will turn the power back on.
- if (HCS_PPC (ehci->hcs_params)){
+ if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
+ temp = ehci_readl(ehci, status_reg);