Merge branch 'linux-linaro-lsk-v4.9' into linux-linaro-lsk-v4.9-androidlsk-v4.9-18.05-androidlsk-v4.9-18.03-androidlsk-v4.9-18.02-androidlsk-v4.9-17.11-androidlsk-v4.9-17.09-androidlsk-v4.9-17.08-androidlsk-v4.9-17.06-android

7 files changed, 43 insertions, 18 deletions

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 1532cde8a437..7812052dc700 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -99,10 +99,17 @@ static int ark3116_read_reg(struct usb_serial *serial,
 				 usb_rcvctrlpipe(serial->dev, 0),
 				 0xfe, 0xc0, 0, reg,
 				 buf, 1, ARK_TIMEOUT);
-	if (result < 0)
+	if (result < 1) {
+		dev_err(&serial->interface->dev,
+				"failed to read register %u: %d\n",
+				reg, result);
+		if (result >= 0)
+			result = -EIO;
+
 		return result;
-	else
-		return buf[0];
+	}
+
+	return buf[0];
 }
 
 static inline int calc_divisor(int bps)
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 8967715fe6fc..b6f1adefb758 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -143,6 +143,7 @@ static int usb_console_setup(struct console *co, char *options)
 			tty->driver = usb_serial_tty_driver;
 			tty->index = co->index;
 			init_ldsem(&tty->ldisc_sem);
+			spin_lock_init(&tty->files_lock);
 			INIT_LIST_HEAD(&tty->tty_files);
 			kref_get(&tty->driver->kref);
 			__module_get(tty->driver->owner);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 243ac5ebe46a..8bb48751028c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -172,6 +172,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
 	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
+	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART interface */
+	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 6e9fc8bcc285..99a0a5f1b400 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1807,8 +1807,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	mutex_init(&priv->cfg_lock);
 
-	priv->flags = ASYNC_LOW_LATENCY;
-
 	if (quirk && quirk->port_probe)
 		quirk->port_probe(priv);
 
@@ -2072,6 +2070,20 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		priv->prev_status = status;
 	}
 
+	/* save if the transmitter is empty or not */
+	if (packet[1] & FTDI_RS_TEMT)
+		priv->transmit_empty = 1;
+	else
+		priv->transmit_empty = 0;
+
+	len -= 2;
+	if (!len)
+		return 0;	/* status only */
+
+	/*
+	 * Break and error status must only be processed for packets with
+	 * data payload to avoid over-reporting.
+	 */
 	flag = TTY_NORMAL;
 	if (packet[1] & FTDI_RS_ERR_MASK) {
 		/* Break takes precedence over parity, which takes precedence
@@ -2094,15 +2106,6 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		}
 	}
 
-	/* save if the transmitter is empty or not */
-	if (packet[1] & FTDI_RS_TEMT)
-		priv->transmit_empty = 1;
-	else
-		priv->transmit_empty = 0;
-
-	len -= 2;
-	if (!len)
-		return 0;	/* status only */
 	port->icount.rx += len;
 	ch = packet + 2;
 
@@ -2433,8 +2436,12 @@ static int ftdi_get_modem_status(struct usb_serial_port *port,
 			FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
 			0, priv->interface,
 			buf, len, WDR_TIMEOUT);
-	if (ret < 0) {
+
+	/* NOTE: We allow short responses and handle that below. */
+	if (ret < 1) {
 		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
 		ret = usb_translate_errors(ret);
 		goto out;
 	}
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 4f9af47e6a29..5c4fc3abf6a7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1024,6 +1024,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * (can't set it up in mos7840_startup as the structures *
 	 * were not set up at that time.)                        */
 	if (port0->open_ports == 1) {
+		/* FIXME: Buffer never NULL, so URB is not submitted. */
 		if (serial->port[0]->interrupt_in_buffer == NULL) {
 			/* set up interrupt urb */
 			usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
@@ -2119,7 +2120,8 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 static int mos7840_attach(struct usb_serial *serial)
 {
 	if (serial->num_bulk_in < serial->num_ports ||
-			serial->num_bulk_out < serial->num_ports) {
+			serial->num_bulk_out < serial->num_ports ||
+			serial->num_interrupt_in < 1) {
 		dev_err(&serial->interface->dev, "missing endpoints\n");
 		return -ENODEV;
 	}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4b7bfb394a32..64bf258e7e00 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -142,7 +142,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 
 	res = usb_serial_generic_open(tty, port);
-	if (!res)
+	if (res)
 		return res;
 
 	/* Request CTS line state, sometimes during opening the current
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 475e6c31b266..ddfd787c461c 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -232,11 +232,17 @@ static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
 			      0, GET_UART_STATUS_MSR, buf, 1, 100);
-	if (ret < 0)
+	if (ret < 1) {
 		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
 
 	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
 	*status = *buf;
+	ret = 0;
+out:
 	kfree(buf);
 
 	return ret;