diff options
author | Kevin Hilman <khilman@linaro.org> | 2015-05-22 14:30:13 -0700 |
---|---|---|
committer | Kevin Hilman <khilman@linaro.org> | 2015-05-22 14:30:13 -0700 |
commit | e49d192fe7dcdc7bc46987f9981dc90f61e5f28c (patch) | |
tree | 84579e5de62f4d67d65203450d0e0268e1e47f2f /drivers/usb/musb/musb_core.c | |
parent | a61d3b775855a1d67d97ca0aa389489cb8a9320d (diff) | |
parent | 51af817611f2c0987030d024f24fc7ea95dd33e6 (diff) |
Merge branch 'linux-3.18.y' of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into linux-linaro-lsk-v3.18lsk-v3.18-15.05
* 'linux-3.18.y' of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable: (222 commits)
Linux 3.18.14
Drivers: hv: vmbus: Don't wait after requesting offers
hfsplus: don't store special "osx" xattr prefix on-disk
drm/radeon: check new address before removing old one
drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5
drm/radeon: adjust pll when audio is not enabled
3w-sas: fix command completion race
3w-9xxx: fix command completion race
3w-xxxx: fix command completion race
ext4: move check under lock scope to close a race.
ext4: fix data corruption caused by unwritten and delayed extents
uas: Set max_sectors_240 quirk for ASM1053 devices
uas: Add US_FL_MAX_SECTORS_240 flag
uas: Allow uas_use_uas_driver to return usb-storage flags
rbd: end I/O the entire obj_request on error
tty/serial: at91: maxburst was missing for dma transfers
ACPI / SBS: Enable battery manager when present
btrfs: unlock i_mutex after attempting to delete subvolume during send
ASoC: rt5677: fixed wrong DMIC ref clock
ASoC: dapm: Enable autodisable on SOC_DAPM_SINGLE_TLV_AUTODISABLE
...
Diffstat (limited to 'drivers/usb/musb/musb_core.c')
-rw-r--r-- | drivers/usb/musb/musb_core.c | 47 |
1 files changed, 28 insertions, 19 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index b841ee0bff06..6d63efce3706 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -99,6 +99,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/usb.h> #include "musb_core.h" @@ -480,7 +481,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + msecs_to_jiffies(20); schedule_delayed_work( &musb->finish_resume_work, - msecs_to_jiffies(20)); + msecs_to_jiffies(USB_RESUME_TIMEOUT)); musb->xceiv->state = OTG_STATE_A_HOST; musb->is_active = 1; @@ -1521,16 +1522,30 @@ irqreturn_t musb_interrupt(struct musb *musb) is_host_active(musb) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); - /* the core can interrupt us for multiple reasons; docs have - * a generic interrupt flowchart to follow + /** + * According to Mentor Graphics' documentation, flowchart on page 98, + * IRQ should be handled as follows: + * + * . Resume IRQ + * . Session Request IRQ + * . VBUS Error IRQ + * . Suspend IRQ + * . Connect IRQ + * . Disconnect IRQ + * . Reset/Babble IRQ + * . SOF IRQ (we're not using this one) + * . Endpoint 0 IRQ + * . TX Endpoints + * . RX Endpoints + * + * We will be following that flowchart in order to avoid any problems + * that might arise with internal Finite State Machine. */ + if (musb->int_usb) retval |= musb_stage0_irq(musb, musb->int_usb, devctl); - /* "stage 1" is handling endpoint irqs */ - - /* handle endpoint 0 first */ if (musb->int_tx & 1) { if (is_host_active(musb)) retval |= musb_h_ep0_irq(musb); @@ -1538,37 +1553,31 @@ irqreturn_t musb_interrupt(struct musb *musb) retval |= musb_g_ep0_irq(musb); } - /* RX on endpoints 1-15 */ - reg = musb->int_rx >> 1; + reg = musb->int_tx >> 1; ep_num = 1; while (reg) { if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval = ep->rx_irq(...) */ retval = IRQ_HANDLED; if (is_host_active(musb)) - musb_host_rx(musb, ep_num); + musb_host_tx(musb, ep_num); else - musb_g_rx(musb, ep_num); + musb_g_tx(musb, ep_num); } - reg >>= 1; ep_num++; } - /* TX on endpoints 1-15 */ - reg = musb->int_tx >> 1; + reg = musb->int_rx >> 1; ep_num = 1; while (reg) { if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval |= ep->tx_irq(...) */ retval = IRQ_HANDLED; if (is_host_active(musb)) - musb_host_tx(musb, ep_num); + musb_host_rx(musb, ep_num); else - musb_g_tx(musb, ep_num); + musb_g_rx(musb, ep_num); } + reg >>= 1; ep_num++; } |