Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 290 insertions, 0 deletions

diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
new file mode 100644
index 000000000000..ea8c8e58cabf
--- /dev/null
+++ b/drivers/usb/gadget/goku_udc.h
@@ -0,0 +1,290 @@
+/*
+ * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
+ *
+ * Copyright (C) 2000-2002 Lineo
+ *      by Stuart Lynne, Tom Rushworth, and Bruce Balden
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2003 MontaVista Software (source@mvista.com)
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * PCI BAR 0 points to these registers.
+ */
+struct goku_udc_regs {
+	/* irq management */
+	u32	int_status;		/* 0x000 */
+	u32	int_enable;
+#define INT_SUSPEND		0x00001		/* or resume */
+#define INT_USBRESET		0x00002
+#define INT_ENDPOINT0		0x00004
+#define INT_SETUP		0x00008
+#define INT_STATUS		0x00010
+#define INT_STATUSNAK		0x00020
+#define INT_EPxDATASET(n)	(0x00020 << (n))	/* 0 < n < 4 */
+#	define INT_EP1DATASET		0x00040
+#	define INT_EP2DATASET		0x00080
+#	define INT_EP3DATASET		0x00100
+#define INT_EPnNAK(n)		(0x00100 < (n))		/* 0 < n < 4 */
+#	define INT_EP1NAK		0x00200
+#	define INT_EP2NAK		0x00400
+#	define INT_EP3NAK		0x00800
+#define INT_SOF			0x01000
+#define INT_ERR			0x02000
+#define INT_MSTWRSET		0x04000
+#define INT_MSTWREND		0x08000
+#define INT_MSTWRTMOUT		0x10000
+#define INT_MSTRDEND		0x20000
+#define INT_SYSERROR		0x40000
+#define INT_PWRDETECT		0x80000
+
+#define	INT_DEVWIDE		(INT_PWRDETECT|INT_SYSERROR/*|INT_ERR*/|INT_USBRESET|INT_SUSPEND)
+#define	INT_EP0 		(INT_SETUP|INT_ENDPOINT0/*|INT_STATUS*/|INT_STATUSNAK)
+
+	u32	dma_master;
+#define MST_EOPB_DIS		0x0800
+#define MST_EOPB_ENA		0x0400
+#define MST_TIMEOUT_DIS		0x0200
+#define MST_TIMEOUT_ENA		0x0100
+#define MST_RD_EOPB		0x0080		/* write-only */
+#define MST_RD_RESET		0x0040
+#define MST_WR_RESET		0x0020
+#define MST_RD_ENA		0x0004		/* 1:start, 0:ignore */
+#define MST_WR_ENA		0x0002		/* 1:start, 0:ignore */
+#define MST_CONNECTION		0x0001		/* 0 for ep1out/ep2in */
+
+#define MST_R_BITS		(MST_EOPB_DIS|MST_EOPB_ENA \
+					|MST_RD_ENA|MST_RD_RESET)
+#define MST_W_BITS		(MST_TIMEOUT_DIS|MST_TIMEOUT_ENA \
+					|MST_WR_ENA|MST_WR_RESET)
+#define MST_RW_BITS		(MST_R_BITS|MST_W_BITS \
+					|MST_CONNECTION)
+
+/* these values assume (dma_master & MST_CONNECTION) == 0 */
+#define UDC_MSTWR_ENDPOINT        1
+#define UDC_MSTRD_ENDPOINT        2
+
+	/* dma master write */
+	u32	out_dma_start;
+	u32	out_dma_end;
+	u32	out_dma_current;
+
+	/* dma master read */
+	u32	in_dma_start;
+	u32	in_dma_end;
+	u32	in_dma_current;
+
+	u32	power_detect;
+#define PW_DETECT		0x04
+#define PW_RESETB		0x02
+#define PW_PULLUP		0x01
+
+	u8	_reserved0 [0x1d8];
+
+	/* endpoint registers */
+	u32	ep_fifo [4];		/* 0x200 */
+	u8	_reserved1 [0x10];
+	u32	ep_mode [4];		/* only 1-3 valid */
+	u8	_reserved2 [0x10];
+
+	u32	ep_status [4];
+#define EPxSTATUS_TOGGLE	0x40
+#define EPxSTATUS_SUSPEND	0x20
+#define EPxSTATUS_EP_MASK	(0x07<<2)
+#	define EPxSTATUS_EP_READY	(0<<2)
+#	define EPxSTATUS_EP_DATAIN	(1<<2)
+#	define EPxSTATUS_EP_FULL	(2<<2)
+#	define EPxSTATUS_EP_TX_ERR	(3<<2)
+#	define EPxSTATUS_EP_RX_ERR	(4<<2)
+#	define EPxSTATUS_EP_BUSY	(5<<2)
+#	define EPxSTATUS_EP_STALL	(6<<2)
+#	define EPxSTATUS_EP_INVALID	(7<<2)
+#define EPxSTATUS_FIFO_DISABLE	0x02
+#define EPxSTATUS_STAGE_ERROR	0x01
+
+	u8	_reserved3 [0x10];
+	u32	EPxSizeLA[4];
+#define PACKET_ACTIVE		(1<<7)
+#define DATASIZE		0x7f
+	u8	_reserved3a [0x10];
+	u32	EPxSizeLB[4];		/* only 1,2 valid */
+	u8	_reserved3b [0x10];
+	u32	EPxSizeHA[4];		/* only 1-3 valid */
+	u8	_reserved3c [0x10];
+	u32	EPxSizeHB[4];		/* only 1,2 valid */
+	u8	_reserved4[0x30];
+
+	/* SETUP packet contents */
+	u32	bRequestType;		/* 0x300 */
+	u32	bRequest;
+	u32	wValueL;
+	u32	wValueH;
+	u32	wIndexL;
+	u32	wIndexH;
+	u32	wLengthL;
+	u32	wLengthH;
+
+	/* command interaction/handshaking */
+	u32	SetupRecv;		/* 0x320 */
+	u32	CurrConfig;
+	u32	StdRequest;
+	u32	Request;
+	u32	DataSet;
+#define DATASET_A(epnum)	(1<<(2*(epnum)))
+#define DATASET_B(epnum)	(2<<(2*(epnum)))
+#define DATASET_AB(epnum)	(3<<(2*(epnum)))
+	u8	_reserved5[4];
+
+	u32	UsbState;
+#define USBSTATE_CONFIGURED	0x04
+#define USBSTATE_ADDRESSED	0x02
+#define USBSTATE_DEFAULT	0x01
+
+	u32	EOP;
+
+	u32	Command;		/* 0x340 */
+#define COMMAND_SETDATA0	2
+#define COMMAND_RESET		3
+#define COMMAND_STALL		4
+#define COMMAND_INVALID		5
+#define COMMAND_FIFO_DISABLE	7
+#define COMMAND_FIFO_ENABLE	8
+#define COMMAND_INIT_DESCRIPTOR	9
+#define COMMAND_FIFO_CLEAR	10	/* also stall */
+#define COMMAND_STALL_CLEAR	11
+#define COMMAND_EP(n)		((n) << 4)
+
+	u32	EPxSingle;
+	u8	_reserved6[4];
+	u32	EPxBCS;
+	u8	_reserved7[8];
+	u32	IntControl;
+#define ICONTROL_STATUSNAK	1
+	u8	_reserved8[4];
+
+	u32	reqmode;	// 0x360 standard request mode, low 8 bits
+#define G_REQMODE_SET_INTF	(1<<7)
+#define G_REQMODE_GET_INTF	(1<<6)
+#define G_REQMODE_SET_CONF	(1<<5)
+#define G_REQMODE_GET_CONF	(1<<4)
+#define G_REQMODE_GET_DESC	(1<<3)
+#define G_REQMODE_SET_FEAT	(1<<2)
+#define G_REQMODE_CLEAR_FEAT	(1<<1)
+#define G_REQMODE_GET_STATUS	(1<<0)
+
+	u32	ReqMode;
+	u8	_reserved9[0x18];
+	u32	PortStatus;		/* 0x380 */
+	u8	_reserved10[8];
+	u32	address;
+	u32	buff_test;
+	u8	_reserved11[4];
+	u32	UsbReady;
+	u8	_reserved12[4];
+	u32	SetDescStall;		/* 0x3a0 */
+	u8	_reserved13[0x45c];
+
+	/* hardware could handle limited GET_DESCRIPTOR duties */
+#define	DESC_LEN	0x80
+	u32	descriptors[DESC_LEN];	/* 0x800 */
+	u8	_reserved14[0x600];
+
+} __attribute__ ((packed));
+
+#define	MAX_FIFO_SIZE	64
+#define	MAX_EP0_SIZE	8		/* ep0 fifo is bigger, though */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+
+struct goku_ep {
+	struct usb_ep				ep;
+	struct goku_udc				*dev;
+	unsigned long				irqs;
+
+	unsigned				num:8,
+						dma:1,
+						is_in:1,
+						stopped:1;
+
+	/* analogous to a host-side qh */
+	struct list_head			queue;
+	const struct usb_endpoint_descriptor	*desc;
+
+	u32 __iomem				*reg_fifo;
+	u32 __iomem				*reg_mode;
+	u32 __iomem				*reg_status;
+};
+
+struct goku_request {
+	struct usb_request		req;
+	struct list_head		queue;
+
+	unsigned			mapped:1;
+};
+
+enum ep0state {
+	EP0_DISCONNECT,		/* no host */
+	EP0_IDLE,		/* between STATUS ack and SETUP report */
+	EP0_IN, EP0_OUT, 	/* data stage */
+	EP0_STATUS,		/* status stage */
+	EP0_STALL,		/* data or status stages */
+	EP0_SUSPEND,		/* usb suspend */
+};
+
+struct goku_udc {
+	/* each pci device provides one gadget, several endpoints */
+	struct usb_gadget		gadget;
+	spinlock_t			lock;
+	struct goku_ep			ep[4];
+	struct usb_gadget_driver 	*driver;
+
+	enum ep0state			ep0state;
+	unsigned			got_irq:1,
+					got_region:1,
+					req_config:1,
+					configured:1,
+					enabled:1;
+
+	/* pci state used to access those endpoints */
+	struct pci_dev			*pdev;
+	struct goku_udc_regs __iomem	*regs;
+	u32				int_enable;
+
+	/* statistics... */
+	unsigned long			irqs;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define xprintk(dev,level,fmt,args...) \
+	printk(level "%s %s: " fmt , driver_name , \
+			pci_name(dev->pdev) , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+	xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(dev,fmt,args...) \
+	do { } while (0)
+#endif	/* VERBOSE */
+
+#define ERROR(dev,fmt,args...) \
+	xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+	xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+	xprintk(dev , KERN_INFO , fmt , ## args)
+