aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2013-10-22 06:49:48 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-10-29 16:26:54 -0700
commit2a0b965cfb6efc667228831fc3a30308b4f94a87 (patch)
tree1226df08fda75015daee1882ebf8d6354880898c /drivers/tty
parent24b6bb0714508e3a4f51dec9f4333c988f8afb76 (diff)
downloadlinux-linaro-stable-2a0b965cfb6efc667228831fc3a30308b4f94a87.tar.gz
serial: omap: Add support for optional wake-up
With the recent pinctrl-single changes, omaps can treat wake-up events from deeper idle states as interrupts. There's a separate "io chain" controller on most omaps that stays enabled when the device hits off-idle and the regular interrupt controller is powered off. Let's add support for the optional second interrupt for wake-up events. And then serial-omap can manage the wake-up interrupt from it's runtime PM calls to avoid spurious interrupts during runtime. Note that the wake interrupt is board specific as it uses the UART RX pin, and for omap3, there are six pin options for UART3 RX pin. Also Note that the legacy platform based booting handles the wake-ups in the legacy mux driver and does not need to pass the wake-up interrupt to the driver. And finally, to pass the wake-up interrupt in the dts file, either interrupt-map or the pending interrupts-extended property needs to be passed. It's probably best to use interrupts-extended when it's available. Cc: Felipe Balbi <balbi@ti.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/omap-serial.c54
1 files changed, 46 insertions, 8 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index c715778a745c..b69393f2817d 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -39,6 +39,7 @@
#include <linux/irq.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/serial-omap.h>
@@ -134,6 +135,7 @@ struct uart_omap_port {
struct uart_port port;
struct uart_omap_dma uart_dma;
struct device *dev;
+ int wakeirq;
unsigned char ier;
unsigned char lcr;
@@ -214,10 +216,23 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
return pdata->get_context_loss_count(up->dev);
}
+static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up,
+ bool enable)
+{
+ if (!up->wakeirq)
+ return;
+
+ if (enable)
+ enable_irq(up->wakeirq);
+ else
+ disable_irq(up->wakeirq);
+}
+
static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
{
struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
+ serial_omap_enable_wakeirq(up, enable);
if (!pdata || !pdata->enable_wakeup)
return;
@@ -699,6 +714,20 @@ static int serial_omap_startup(struct uart_port *port)
if (retval)
return retval;
+ /* Optional wake-up IRQ */
+ if (up->wakeirq) {
+ retval = request_irq(up->wakeirq, serial_omap_irq,
+ up->port.irqflags, up->name, up);
+ if (retval) {
+ free_irq(up->port.irq, up);
+ return retval;
+ }
+ disable_irq(up->wakeirq);
+ } else {
+ dev_info(up->port.dev, "no wakeirq for uart%d\n",
+ up->port.line);
+ }
+
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
pm_runtime_get_sync(up->dev);
@@ -787,6 +816,8 @@ static void serial_omap_shutdown(struct uart_port *port)
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
free_irq(up->port.irq, up);
+ if (up->wakeirq)
+ free_irq(up->wakeirq, up);
}
static void serial_omap_uart_qos_work(struct work_struct *work)
@@ -1572,11 +1603,23 @@ static int serial_omap_probe(struct platform_device *pdev)
struct uart_omap_port *up;
struct resource *mem, *irq;
struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
- int ret;
+ int ret, uartirq = 0, wakeirq = 0;
+ /* The optional wakeirq may be specified in the board dts file */
if (pdev->dev.of_node) {
+ uartirq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (!uartirq)
+ return -EPROBE_DEFER;
+ wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1);
omap_up_info = of_get_uart_port_info(&pdev->dev);
pdev->dev.platform_data = omap_up_info;
+ } else {
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return -ENODEV;
+ }
+ uartirq = irq->start;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1585,12 +1628,6 @@ static int serial_omap_probe(struct platform_device *pdev)
return -ENODEV;
}
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
- dev_err(&pdev->dev, "no irq resource?\n");
- return -ENODEV;
- }
-
if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
pdev->dev.driver->name)) {
dev_err(&pdev->dev, "memory region already claimed\n");
@@ -1624,7 +1661,8 @@ static int serial_omap_probe(struct platform_device *pdev)
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
up->port.iotype = UPIO_MEM;
- up->port.irq = irq->start;
+ up->port.irq = uartirq;
+ up->wakeirq = wakeirq;
up->port.regshift = 2;
up->port.fifosize = 64;