Staging: panel: remove support for smartcards

Smartcard support was more like a proof-of-concept than a completed
work. It was only able to read serial numbers from a few smartcards,
and the goal was to be able to secure keypad access with a smartcard.
Given how the concept was limited, this was never used beyond demos,
and it's better to remove this code so that nobody tries to use it
for security purposes.

The function panel_bind_callback() was ifdef'ed out, as its only user
was smartcard. However, it would be a waste to remove it because many
variations made on this driver will need it.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Frank Menne <frank.menne@hsm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 13 insertions, 204 deletions

diff --git a/drivers/staging/panel/Kconfig b/drivers/staging/panel/Kconfig
index 7cf655757748..c4b30f2a549b 100644
--- a/drivers/staging/panel/Kconfig
+++ b/drivers/staging/panel/Kconfig
@@ -3,13 +3,12 @@ config PANEL
 	depends on PARPORT
 	---help---
 	  Say Y here if you have an HD44780 or KS-0074 LCD connected to your
-	  parallel port. This driver also features 4 and 6-key keypads, and a
-	  'smartcard' reader. The LCD is accessible through the /dev/lcd char
-	  device (10, 156), the keypad through /dev/keypad (10, 185), and the
-	  smartcard through /dev/smartcard (10, 186). Both require misc device
-	  to be enabled. This code can either be compiled as a module, or linked
-	  into the kernel and started at boot. If you don't understand what all
-	  this is about, say N.
+	  parallel port. This driver also features 4 and 6-key keypads. The LCD
+	  is accessible through the /dev/lcd char device (10, 156), and the
+	  keypad through /dev/keypad (10, 185). Both require misc device to be
+	  enabled. This code can either be compiled as a module, or linked into
+	  the kernel and started at boot. If you don't understand what all this
+	  is about, say N.
 
 config PANEL_PARPORT
 	int "Default parallel port number (0=LPT1)"
@@ -45,17 +44,6 @@ config PANEL_PROFILE
 	  wired to the parallel port, and how it works. This is only intended
 	  for experts.
 
-config PANEL_SMARTCARD
-	depends on PANEL && PANEL_PROFILE="0"
-	bool "Enable smartcard reader (read help!)"
-	default "n"
-	---help---
-	  This enables the 'smartcard' reader as installed on the server at
-	  'www.ant-computing.com'. It was not really a smartcard reader, just
-	  a telephone-card reader. It is left here for demonstration and
-	  experimentation. If you enable this driver, it will be accessible
-	  through character device 10,186.
-
 config PANEL_KEYPAD
 	depends on PANEL && PANEL_PROFILE="0"
 	int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)"
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 7f8c1b721162..5ffe269c2382 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -61,18 +61,13 @@
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
-/* smartcard length */
-#define SMARTCARD_BYTES		64
 #define LCD_MINOR		156
 #define KEYPAD_MINOR		185
-#define SMARTCARD_MINOR		186
 
 #define PANEL_VERSION		"0.9.5"
 
 #define LCD_MAXBYTES		256	/* max burst write */
 
-#define SMARTCARD_LOGICAL_DETECTOR	"S6"	/* D6 wired to SELECT = card inserted */
-
 #define KEYPAD_BUFFER		64
 #define INPUT_POLL_TIME		(HZ/50)	/* poll the keyboard this every second */
 #define KEYPAD_REP_START	(10)	/* a key starts to repeat after this times INPUT_POLL_TIME */
@@ -120,15 +115,6 @@
 #define PIN_SELECP		17
 #define PIN_NOT_SET		127
 
-/* some smartcard-specific signals */
-#define PNL_SC_IO		PNL_PD1	/* Warning! inverted output, 0=highZ */
-#define PNL_SC_RST		PNL_PD2
-#define PNL_SC_CLK		PNL_PD3
-#define PNL_SC_RW		PNL_PD4
-#define PNL_SC_ENA		PNL_PINITP
-#define PNL_SC_IOR		PNL_PACK
-#define PNL_SC_BITS		(PNL_SC_IO | PNL_SC_RST | PNL_SC_CLK | PNL_SC_RW)
-
 #define LCD_FLAG_S		0x0001
 #define LCD_FLAG_ID		0x0002
 #define LCD_FLAG_B		0x0004	/* blink on */
@@ -209,17 +195,12 @@ static pmask_t phys_curr;	/* stabilized phys_read (phys_read|phys_read_prev) */
 static pmask_t phys_prev;	/* previous phys_curr */
 static char inputs_stable;	/* 0 means that at least one logical signal needs be computed */
 
-/* these variables are specific to the smartcard */
-static __u8 smartcard_data[SMARTCARD_BYTES];
-static int smartcard_ptr;	/* pointer to half bytes in smartcard_data */
-
 /* these variables are specific to the keypad */
 static char keypad_buffer[KEYPAD_BUFFER];
 static int keypad_buflen;
 static int keypad_start;
 static char keypressed;
 static wait_queue_head_t keypad_read_wait;
-static wait_queue_head_t smartcard_read_wait;
 
 /* lcd-specific variables */
 static unsigned long int lcd_flags;	/* contains the LCD config state */
@@ -304,7 +285,6 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES];
 #define DEFAULT_PARPORT         0
 #define DEFAULT_LCD             LCD_TYPE_OLD
 #define DEFAULT_KEYPAD          KEYPAD_TYPE_OLD
-#define DEFAULT_SMARTCARD       0
 #define DEFAULT_LCD_WIDTH       40
 #define DEFAULT_LCD_BWIDTH      40
 #define DEFAULT_LCD_HWIDTH      64
@@ -335,11 +315,6 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES];
 #define DEFAULT_KEYPAD CONFIG_PANEL_KEYPAD
 #endif
 
-#ifdef CONFIG_PANEL_SMARTCARD
-#undef DEFAULT_SMARTCARD
-#define DEFAULT_SMARTCARD 1
-#endif
-
 #ifdef CONFIG_PANEL_LCD
 #undef DEFAULT_LCD
 #define DEFAULT_LCD CONFIG_PANEL_LCD
@@ -408,14 +383,12 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES];
 #endif /* DEFAULT_PROFILE == 0 */
 
 /* global variables */
-static int smartcard_open_cnt;	/* #times opened */
 static int keypad_open_cnt;	/* #times opened */
 static int lcd_open_cnt;	/* #times opened */
 static struct pardevice *pprt;
 
 static int lcd_initialized;
 static int keypad_initialized;
-static int smartcard_initialized;
 
 static int light_tempo;
 
@@ -430,7 +403,7 @@ static void (*lcd_clear_fast) (void);
 static DEFINE_SPINLOCK(pprt_lock);
 static struct timer_list scan_timer;
 
-MODULE_DESCRIPTION("Generic parallel port LCD/Keypad/Smartcard driver");
+MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver");
 
 static int parport = -1;
 module_param(parport, int, 0000);
@@ -478,11 +451,6 @@ module_param(keypad_type, int, 0000);
 MODULE_PARM_DESC(keypad_type,
 		 "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
 
-static int smartcard_enabled = -1;
-module_param(smartcard_enabled, int, 0000);
-MODULE_PARM_DESC(smartcard_enabled,
-		 "Smartcard reader: 0=disabled (default), 1=enabled");
-
 static int profile = DEFAULT_PROFILE;
 module_param(profile, int, 0000);
 MODULE_PARM_DESC(profile,
@@ -494,7 +462,7 @@ MODULE_PARM_DESC(profile,
  * (negative) if the signal is negated. -MAXINT is used to indicate that the
  * pin has not been explicitly specified.
  *
- * WARNING! no check will be performed about collisions with keypad/smartcard !
+ * WARNING! no check will be performed about collisions with keypad !
  */
 
 static int lcd_e_pin  = PIN_NOT_SET;
@@ -1799,9 +1767,7 @@ static void panel_process_inputs(void)
 
 static void panel_scan_timer(void)
 {
-	if ((keypad_enabled && keypad_initialized)
-	    || (smartcard_enabled && smartcard_enabled)) {
-
+	if (keypad_enabled && keypad_initialized) {
 		if (spin_trylock(&pprt_lock)) {
 			phys_scan_contacts();
 			spin_unlock(&pprt_lock);	/* no need for the parport anymore */
@@ -1826,121 +1792,6 @@ static void panel_scan_timer(void)
 	mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME);
 }
 
-/* send a high / low clock impulse of <duration> microseconds high and low */
-static void smartcard_send_clock(int duration)
-{
-	int old;
-
-	w_dtr(pprt, (old = r_dtr(pprt)) | PNL_SC_CLK);
-	udelay(duration);
-	w_dtr(pprt, (old & ~PNL_SC_CLK));
-	udelay(duration);
-}
-
-static void smartcard_insert(int dummy)
-{
-	int ofs;
-
-	spin_lock(&pprt_lock);
-	w_dtr(pprt, (r_dtr(pprt) & ~PNL_SC_BITS));
-	w_ctr(pprt, (r_ctr(pprt) | PNL_SC_ENA));
-
-	udelay(30);		/* ensure the rst is low at least 30 us */
-
-	smartcard_send_clock(100);	/* reset address counter */
-
-	w_dtr(pprt, r_dtr(pprt) | PNL_SC_RST);
-	udelay(30);		/* ensure the rst is high at least 30 us */
-
-	for (ofs = 0; ofs < SMARTCARD_BYTES; ofs++) {
-		int bit, byte;
-		byte = 0;
-		for (bit = 128; bit > 0; bit >>= 1) {
-			if (!(r_str(pprt) & PNL_SC_IOR))
-				byte |= bit;
-			smartcard_send_clock(15);	/* 15 us are enough for data */
-		}
-		smartcard_data[ofs] = byte;
-	}
-
-	w_dtr(pprt, (r_dtr(pprt) & ~PNL_SC_BITS));
-	w_ctr(pprt, (r_ctr(pprt) & ~PNL_SC_ENA));
-
-	spin_unlock(&pprt_lock);
-
-	printk(KERN_INFO "Panel: smart card inserted : %02x%02x%02x%02x%1x\n",
-	       smartcard_data[2], smartcard_data[3], smartcard_data[4],
-	       smartcard_data[5], smartcard_data[6] >> 4);
-	keypad_send_key("CardIn\n", 7);
-}
-
-static void smartcard_remove(int dummy)
-{
-	printk(KERN_INFO "Panel: smart card removed : %02x%02x%02x%02x%1x\n",
-	       smartcard_data[2], smartcard_data[3], smartcard_data[4],
-	       smartcard_data[5], smartcard_data[6] >> 4);
-	memset(smartcard_data, 0, sizeof(smartcard_data));
-	keypad_send_key("CardOut\n", 8);
-}
-
-/*
- * These are the file operation function for user access to /dev/smartcard
- */
-
-static ssize_t smartcard_read(struct file *file,
-			      char *buf, size_t count, loff_t *ppos)
-{
-
-	unsigned i = *ppos;
-	char *tmp = buf;
-
-	for (; count-- > 0 && (smartcard_ptr < 9); ++i, ++tmp, ++smartcard_ptr) {
-		if (smartcard_ptr & 1)
-			put_user('0' +
-				 (smartcard_data[2 + (smartcard_ptr >> 1)] &
-				  0xF), tmp);
-		else
-			put_user('0' +
-				 (smartcard_data[2 + (smartcard_ptr >> 1)] >>
-				  4), tmp);
-	}
-	*ppos = i;
-
-	return tmp - buf;
-}
-
-static int smartcard_open(struct inode *inode, struct file *file)
-{
-
-	if (smartcard_open_cnt)
-		return -EBUSY;	/* open only once at a time */
-
-	if (file->f_mode & FMODE_WRITE)	/* device is read-only */
-		return -EPERM;
-
-	smartcard_ptr = 0;	/* flush the buffer on opening */
-	smartcard_open_cnt++;
-	return 0;
-}
-
-static int smartcard_release(struct inode *inode, struct file *file)
-{
-	smartcard_open_cnt--;
-	return 0;
-}
-
-static struct file_operations smartcard_fops = {
-	.read    = smartcard_read,	/* read */
-	.open    = smartcard_open,	/* open */
-	.release = smartcard_release,	/* close */
-};
-
-static struct miscdevice smartcard_dev = {
-	SMARTCARD_MINOR,
-	"smartcard",
-	&smartcard_fops
-};
-
 static void init_scan_timer(void)
 {
 	if (scan_timer.function != NULL)
@@ -2037,6 +1888,7 @@ static struct logical_input *panel_bind_key(char *name, char *press,
 	return key;
 }
 
+#if 0
 /* tries to bind a callback function to the signal name <name>. The function
  * <press_fct> will be called with the <press_data> arg when the signal is
  * activated, and so on for <release_fct>/<release_data>
@@ -2071,6 +1923,7 @@ static struct logical_input *panel_bind_callback(char *name,
 	list_add(&callback->list, &logical_inputs);
 	return callback;
 }
+#endif
 
 static void keypad_init(void)
 {
@@ -2091,16 +1944,6 @@ static void keypad_init(void)
 	keypad_initialized = 1;
 }
 
-static void smartcard_init(void)
-{
-	init_waitqueue_head(&smartcard_read_wait);
-
-	panel_bind_callback(SMARTCARD_LOGICAL_DETECTOR, &smartcard_insert, 0,
-			    &smartcard_remove, 0);
-	init_scan_timer();
-	smartcard_enabled = 1;
-}
-
 /**************************************************/
 /* device initialization                          */
 /**************************************************/
@@ -2168,11 +2011,6 @@ static void panel_attach(struct parport *port)
 		keypad_init();
 		misc_register(&keypad_dev);
 	}
-
-	if (smartcard_enabled) {
-		smartcard_init();
-		misc_register(&smartcard_dev);
-	}
 }
 
 static void panel_detach(struct parport *port)
@@ -2187,9 +2025,6 @@ static void panel_detach(struct parport *port)
 		return;
 	}
 
-	if (smartcard_enabled && smartcard_initialized)
-		misc_deregister(&smartcard_dev);
-
 	if (keypad_enabled && keypad_initialized)
 		misc_deregister(&keypad_dev);
 
@@ -2225,16 +2060,12 @@ int panel_init(void)
 	case PANEL_PROFILE_CUSTOM:	/* custom profile */
 		if (keypad_type < 0)
 			keypad_type = DEFAULT_KEYPAD;
-		if (smartcard_enabled < 0)
-			smartcard_enabled = DEFAULT_SMARTCARD;
 		if (lcd_type < 0)
 			lcd_type = DEFAULT_LCD;
 		break;
 	case PANEL_PROFILE_OLD:	/* 8 bits, 2*16, old keypad */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_OLD;
-		if (smartcard_enabled < 0)
-			smartcard_enabled = 0;
 		if (lcd_type < 0)
 			lcd_type = LCD_TYPE_OLD;
 		if (lcd_width < 0)
@@ -2245,32 +2076,24 @@ int panel_init(void)
 	case PANEL_PROFILE_NEW:	/* serial, 2*16, new keypad */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_NEW;
-		if (smartcard_enabled < 0)
-			smartcard_enabled = 1;
 		if (lcd_type < 0)
 			lcd_type = LCD_TYPE_KS0074;
 		break;
 	case PANEL_PROFILE_HANTRONIX:	/* 8 bits, 2*16 hantronix-like, no keypad */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_NONE;
-		if (smartcard_enabled < 0)
-			smartcard_enabled = 0;
 		if (lcd_type < 0)
 			lcd_type = LCD_TYPE_HANTRONIX;
 		break;
 	case PANEL_PROFILE_NEXCOM:	/* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_NEXCOM;
-		if (smartcard_enabled < 0)
-			smartcard_enabled = 0;
 		if (lcd_type < 0)
 			lcd_type = LCD_TYPE_NEXCOM;
 		break;
 	case PANEL_PROFILE_LARGE:	/* 8 bits, 2*40, old keypad */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_OLD;
-		if (smartcard_enabled < 0)
-			smartcard_enabled = 0;
 		if (lcd_type < 0)
 			lcd_type = LCD_TYPE_OLD;
 		break;
@@ -2303,7 +2126,8 @@ int panel_init(void)
 		return -EIO;
 	}
 
-	if (!lcd_enabled && !keypad_enabled && !smartcard_enabled) {	/* no device enabled, let's release the parport */
+	if (!lcd_enabled && !keypad_enabled) {
+		/* no device enabled, let's release the parport */
 		if (pprt) {
 			parport_release(pprt);
 			parport_unregister_device(pprt);
@@ -2343,9 +2167,6 @@ static void __exit panel_cleanup_module(void)
 	if (keypad_enabled)
 		misc_deregister(&keypad_dev);
 
-	if (smartcard_enabled)
-		misc_deregister(&smartcard_dev);
-
 	if (lcd_enabled) {
 		panel_lcd_print("\x0cLCD driver " PANEL_VERSION
 				"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");