Merge branch 'linux-linaro-lsk-v3.10' into linux-linaro-lsk-v3.10-rtlsk-v3.10-15.08-rt

5 files changed, 67 insertions, 17 deletions

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 497fe9b72f70..193619da43da 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3898,10 +3898,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 
 	/* Save the PCI command register */
 	pci_read_config_word(pdev, 4, &command_register);
-	/* Turn the board off.  This is so that later pci_restore_state()
-	 * won't turn the board on before the rest of config space is ready.
-	 */
-	pci_disable_device(pdev);
 	pci_save_state(pdev);
 
 	/* find the first memory BAR, so we can find the cfg table */
@@ -3949,11 +3945,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 		goto unmap_cfgtable;
 
 	pci_restore_state(pdev);
-	rc = pci_enable_device(pdev);
-	if (rc) {
-		dev_warn(&pdev->dev, "failed to enable device.\n");
-		goto unmap_cfgtable;
-	}
 	pci_write_config_word(pdev, 4, command_register);
 
 	/* Some devices (notably the HP Smart Array 5i Controller)
@@ -4448,6 +4439,23 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 	if (!reset_devices)
 		return 0;
 
+	/* kdump kernel is loading, we don't know in which state is
+	 * the pci interface. The dev->enable_cnt is equal zero
+	 * so we call enable+disable, wait a while and switch it on.
+	 */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "Failed to enable PCI device\n");
+		return -ENODEV;
+	}
+	pci_disable_device(pdev);
+	msleep(260);			/* a randomly chosen number */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "failed to enable device.\n");
+		return -ENODEV;
+	}
+	pci_set_master(pdev);
 	/* Reset the controller with a PCI power-cycle or via doorbell */
 	rc = hpsa_kdump_hard_reset_controller(pdev);
 
@@ -4456,10 +4464,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 	 * "performant mode".  Or, it might be 640x, which can't reset
 	 * due to concerns about shared bbwc between 6402/6404 pair.
 	 */
-	if (rc == -ENOTSUPP)
-		return rc; /* just try to do the kdump anyhow. */
-	if (rc)
-		return -ENODEV;
+	if (rc) {
+		if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
+			rc = -ENODEV;
+		goto out_disable;
+	}
 
 	/* Now try to get the controller to respond to a no-op */
 	dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
@@ -4470,7 +4479,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 			dev_warn(&pdev->dev, "no-op failed%s\n",
 					(i < 11 ? "; re-trying" : ""));
 	}
-	return 0;
+
+out_disable:
+
+	pci_disable_device(pdev);
+	return rc;
 }
 
 static int hpsa_allocate_cmd_pool(struct ctlr_info *h)
@@ -4613,6 +4626,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
 		iounmap(h->transtable);
 	if (h->cfgtable)
 		iounmap(h->cfgtable);
+	pci_disable_device(h->pdev);
 	pci_release_regions(h->pdev);
 	kfree(h);
 }
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 535f57328a72..c19911554036 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -257,7 +257,7 @@
 #define IPR_RUNTIME_RESET				0x40000000
 
 #define IPR_IPL_INIT_MIN_STAGE_TIME			5
-#define IPR_IPL_INIT_DEFAULT_STAGE_TIME                 15
+#define IPR_IPL_INIT_DEFAULT_STAGE_TIME                 30
 #define IPR_IPL_INIT_STAGE_UNKNOWN			0x0
 #define IPR_IPL_INIT_STAGE_TRANSOP			0xB0000000
 #define IPR_IPL_INIT_STAGE_MASK				0xff000000
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 572579f87de4..90861416b9e9 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -263,6 +263,16 @@ lpfc_sli4_eq_get(struct lpfc_queue *q)
 		return NULL;
 
 	q->hba_index = idx;
+
+	/*
+	 * insert barrier for instruction interlock : data from the hardware
+	 * must have the valid bit checked before it can be copied and acted
+	 * upon. Given what was seen in lpfc_sli4_cq_get() of speculative
+	 * instructions allowing action on content before valid bit checked,
+	 * add barrier here as well. May not be needed as "content" is a
+	 * single 32-bit entity here (vs multi word structure for cq's).
+	 */
+	mb();
 	return eqe;
 }
 
@@ -368,6 +378,17 @@ lpfc_sli4_cq_get(struct lpfc_queue *q)
 
 	cqe = q->qe[q->hba_index].cqe;
 	q->hba_index = idx;
+
+	/*
+	 * insert barrier for instruction interlock : data from the hardware
+	 * must have the valid bit checked before it can be copied and acted
+	 * upon. Speculative instructions were allowing a bcopy at the start
+	 * of lpfc_sli4_fp_handle_wcqe(), which is called immediately
+	 * after our return, to copy data before the valid bit check above
+	 * was done. As such, some of the copied data was stale. The barrier
+	 * ensures the check is before any data is copied.
+	 */
+	mb();
 	return cqe;
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d2a4c75e5b8f..813e9d8ba351 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -523,8 +523,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 	struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
 	struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
-	uint32_t	rscn_entry, host_pid;
+	uint32_t	rscn_entry, host_pid, tmp_pid;
 	unsigned long	flags;
+	fc_port_t	*fcport = NULL;
 
 	/* Setup to process RIO completion. */
 	handle_cnt = 0;
@@ -918,6 +919,20 @@ skip_rio:
 		if (qla2x00_is_a_vp_did(vha, rscn_entry))
 			break;
 
+		/*
+		 * Search for the rport related to this RSCN entry and mark it
+		 * as lost.
+		 */
+		list_for_each_entry(fcport, &vha->vp_fcports, list) {
+			if (atomic_read(&fcport->state) != FCS_ONLINE)
+				continue;
+			tmp_pid = fcport->d_id.b24;
+			if (fcport->d_id.b24 == rscn_entry) {
+				qla2x00_mark_device_lost(vha, fcport, 0, 0);
+				break;
+			}
+		}
+
 		atomic_set(&vha->loop_down_timer, 0);
 		vha->flags.management_server_logged_in = 0;
 
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 2a32036a9404..fa9811200c9d 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -1262,9 +1262,9 @@ static int st_open(struct inode *inode, struct file *filp)
 	spin_lock(&st_use_lock);
 	STp->in_use = 0;
 	spin_unlock(&st_use_lock);
-	scsi_tape_put(STp);
 	if (resumed)
 		scsi_autopm_put_device(STp->device);
+	scsi_tape_put(STp);
 	return retval;
 
 }