diff options
| author | Todd Fujinaka <todd.fujinaka@intel.com> | 2014-05-08 23:20:24 +0000 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2014-05-27 02:10:44 -0700 |
| commit | 18cae6f7bb65bdb272f844525f7acd6d464a8541 (patch) | |
| tree | 1d67f8e748a8da0c2788a1f24f02d4a7c632b974 /drivers/net/ethernet | |
| parent | c6f3148c5bcad2eb9ff1c700d6c79815173aed35 (diff) | |
igb: remove redundant PHY power down register write
One of the registers used to power down the PHY was found to be wrong
(should be bit 2 not bit 1) on further inspection it was also found to
be redundant.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_phy.c | 14 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_phy.h | 1 |
2 files changed, 0 insertions, 15 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index 424f16c43759..c1bb64d8366f 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -2204,16 +2204,10 @@ s32 igb_phy_init_script_igp3(struct e1000_hw *hw) void igb_power_up_phy_copper(struct e1000_hw *hw) { u16 mii_reg = 0; - u16 power_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); mii_reg &= ~MII_CR_POWER_DOWN; - if (hw->phy.type == e1000_phy_i210) { - hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); - power_reg &= ~GS40G_CS_POWER_DOWN; - hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); - } hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); } @@ -2227,18 +2221,10 @@ void igb_power_up_phy_copper(struct e1000_hw *hw) void igb_power_down_phy_copper(struct e1000_hw *hw) { u16 mii_reg = 0; - u16 power_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; - - /* i210 Phy requires an additional bit for power up/down */ - if (hw->phy.type == e1000_phy_i210) { - hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); - power_reg |= GS40G_CS_POWER_DOWN; - hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); - } hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); usleep_range(1000, 2000); } diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h index fe921e29dda8..7af4ffab0285 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.h +++ b/drivers/net/ethernet/intel/igb/e1000_phy.h @@ -151,7 +151,6 @@ s32 igb_check_polarity_m88(struct e1000_hw *hw); #define GS40G_MAC_LB 0x4140 #define GS40G_MAC_SPEED_1G 0X0006 #define GS40G_COPPER_SPEC 0x0010 -#define GS40G_CS_POWER_DOWN 0x0002 #define GS40G_LINE_LB 0x4000 /* SFP modules ID memory locations */ |