aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
diff options
context:
space:
mode:
authorJoe Perches <joe@perches.com>2015-03-06 20:49:12 -0800
committerDavid S. Miller <davem@davemloft.net>2015-03-08 22:54:22 -0400
commitdbedd44e982d61c156337b1a3fb252b24085f8e3 (patch)
tree51e33a44db4e38f5a560c643a880cf08f7280b2d /drivers/net/ethernet/intel
parentcbe21d92e4d501e4895ef668b43fd8998c9b3b02 (diff)
downloadlinux-linaro-stable-dbedd44e982d61c156337b1a3fb252b24085f8e3.tar.gz
ethernet: codespell comment spelling fixes
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/intel')
-rw-r--r--drivers/net/ethernet/intel/e100.c2
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_main.c2
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40evf_main.c4
-rw-r--r--drivers/net/ethernet/intel/igb/igb_ptp.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_type.h2
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/vf.c2
9 files changed, 10 insertions, 10 deletions
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index e9c3a87e5b11..05f88394f9a5 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -414,7 +414,7 @@ enum cb_status {
/**
* cb_command - Command Block flags
- * @cb_tx_nc: 0: controler does CRC (normal), 1: CRC from skb memory
+ * @cb_tx_nc: 0: controller does CRC (normal), 1: CRC from skb memory
*/
enum cb_command {
cb_nop = 0x0000,
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 73c98d34fa1f..b548ef0cf56b 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -1116,7 +1116,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (e1000_read_mac_addr(hw))
e_err(probe, "EEPROM Read Error\n");
}
- /* don't block initalization here due to bad MAC address */
+ /* don't block initialization here due to bad MAC address */
memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->dev_addr))
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 8537416123a5..f44911df286a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2009,7 +2009,7 @@ static int i40evf_check_reset_complete(struct i40e_hw *hw)
*
* This task completes the work that was begun in probe. Due to the nature
* of VF-PF communications, we may need to wait tens of milliseconds to get
- * reponses back from the PF. Rather than busy-wait in probe and bog down the
+ * responses back from the PF. Rather than busy-wait in probe and bog down the
* whole system, we'll do it in a task so we can sleep.
* This task only runs during driver init. Once we've established
* communications with the PF driver and set up our netdev, the watchdog
@@ -2400,7 +2400,7 @@ static int i40evf_suspend(struct pci_dev *pdev, pm_message_t state)
}
/**
- * i40evf_resume - Power managment resume routine
+ * i40evf_resume - Power management resume routine
* @pdev: PCI device information struct
*
* Called when the system (VM) is resumed from sleep/suspend.
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index d6be4c69172d..52d01b8b01ed 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -30,7 +30,7 @@
*
* Neither the 82576 nor the 82580 offer registers wide enough to hold
* nanoseconds time values for very long. For the 82580, SYSTIM always
- * counts nanoseconds, but the upper 24 bits are not availible. The
+ * counts nanoseconds, but the upper 24 bits are not available. The
* frequency is adjusted by changing the 32 bit fractional nanoseconds
* register, TIMINCA.
*
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 903664ff6904..21aea7e7f03f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2609,7 +2609,7 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data)
eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
/* The lower 16bits of the EICR register are for the queue interrupts
- * which should be masked here in order to not accidently clear them if
+ * which should be masked here in order to not accidentally clear them if
* the bits are high when ixgbe_msix_other is called. There is a race
* condition otherwise which results in possible performance loss
* especially if the ixgbe_msix_other interrupt is triggering
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 79c00f57d3e7..bd46f5d1c943 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -488,7 +488,7 @@ static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter)
* @work: pointer to the work struct
*
* This work item polls TSYNCTXCTL valid bit to determine when a Tx hardware
- * timestamp has been taken for the current skb. It is necesary, because the
+ * timestamp has been taken for the current skb. It is necessary, because the
* descriptor's "done" bit does not correlate with the timestamp event.
*/
static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 7f37fe7269a7..09a291bb7c34 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -141,7 +141,7 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter)
* The 82599 supports up to 64 VFs per physical function
* but this implementation limits allocation to 63 so that
* basic networking resources are still available to the
- * physical function. If the user requests greater thn
+ * physical function. If the user requests greater than
* 63 VFs then it is an error - reset to default of zero.
*/
adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, IXGBE_MAX_VFS_DRV_LIMIT);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index fc5ecee56ca8..8451f9a7cbd8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1690,7 +1690,7 @@ enum {
#define IXGBE_MACC_FS 0x00040000
#define IXGBE_MAC_RX2TX_LPBK 0x00000002
-/* Veto Bit definiton */
+/* Veto Bit definition */
#define IXGBE_MMNGC_MNG_VETO 0x00000001
/* LINKS Bit Masks */
diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.c b/drivers/net/ethernet/intel/ixgbevf/vf.c
index cdb53be7d995..f510a5822f90 100644
--- a/drivers/net/ethernet/intel/ixgbevf/vf.c
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.c
@@ -65,7 +65,7 @@ static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
* ixgbevf_reset_hw_vf - Performs hardware reset
* @hw: pointer to hardware structure
*
- * Resets the hardware by reseting the transmit and receive units, masks and
+ * Resets the hardware by resetting the transmit and receive units, masks and
* clears all interrupts.
**/
static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)