Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pulling to get some TIPC fixes that a net-next series depends
upon.

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 43 insertions, 30 deletions

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 5dede6e64376..109cb44291f5 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -280,7 +280,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
 
 		priv->raminit_ctrlreg = devm_ioremap(&pdev->dev, res->start,
 						     resource_size(res));
-		if (IS_ERR(priv->raminit_ctrlreg) || priv->instance < 0)
+		if (!priv->raminit_ctrlreg || priv->instance < 0)
 			dev_info(&pdev->dev, "control memory is not used for raminit\n");
 		else
 			priv->raminit = c_can_hw_raminit_ti;
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index ff1beb92a985..2700865efcad 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -608,6 +608,13 @@ static void do_state(struct net_device *dev,
 
 	/* process state changes depending on the new state */
 	switch (new_state) {
+	case CAN_STATE_ERROR_WARNING:
+		netdev_dbg(dev, "Error Warning\n");
+		cf->can_id |= CAN_ERR_CRTL;
+		cf->data[1] = (bec.txerr > bec.rxerr) ?
+			CAN_ERR_CRTL_TX_WARNING :
+			CAN_ERR_CRTL_RX_WARNING;
+		break;
 	case CAN_STATE_ERROR_ACTIVE:
 		netdev_dbg(dev, "Error Active\n");
 		cf->can_id |= CAN_ERR_PROT;
@@ -911,6 +918,8 @@ static int flexcan_chip_start(struct net_device *dev)
 	if (priv->devtype_data->features & FLEXCAN_HAS_BROKEN_ERR_STATE ||
 	    priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
 		reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
+	else
+		reg_ctrl &= ~FLEXCAN_CTRL_ERR_MSK;
 
 	/* save for later use */
 	priv->reg_ctrl_default = reg_ctrl;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index d1692154ed1b..b27ac6074afb 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -172,6 +172,35 @@ static void set_normal_mode(struct net_device *dev)
 	netdev_err(dev, "setting SJA1000 into normal mode failed!\n");
 }
 
+/*
+ * initialize SJA1000 chip:
+ *   - reset chip
+ *   - set output mode
+ *   - set baudrate
+ *   - enable interrupts
+ *   - start operating mode
+ */
+static void chipset_init(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	/* set clock divider and output control register */
+	priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
+
+	/* set acceptance filter (accept all) */
+	priv->write_reg(priv, SJA1000_ACCC0, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC1, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC2, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC3, 0x00);
+
+	priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
+
+	priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
+}
+
 static void sja1000_start(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
@@ -180,6 +209,10 @@ static void sja1000_start(struct net_device *dev)
 	if (priv->can.state != CAN_STATE_STOPPED)
 		set_reset_mode(dev);
 
+	/* Initialize chip if uninitialized at this stage */
+	if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
+		chipset_init(dev);
+
 	/* Clear error counters and error code capture */
 	priv->write_reg(priv, SJA1000_TXERR, 0x0);
 	priv->write_reg(priv, SJA1000_RXERR, 0x0);
@@ -237,35 +270,6 @@ static int sja1000_get_berr_counter(const struct net_device *dev,
 }
 
 /*
- * initialize SJA1000 chip:
- *   - reset chip
- *   - set output mode
- *   - set baudrate
- *   - enable interrupts
- *   - start operating mode
- */
-static void chipset_init(struct net_device *dev)
-{
-	struct sja1000_priv *priv = netdev_priv(dev);
-
-	/* set clock divider and output control register */
-	priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
-
-	/* set acceptance filter (accept all) */
-	priv->write_reg(priv, SJA1000_ACCC0, 0x00);
-	priv->write_reg(priv, SJA1000_ACCC1, 0x00);
-	priv->write_reg(priv, SJA1000_ACCC2, 0x00);
-	priv->write_reg(priv, SJA1000_ACCC3, 0x00);
-
-	priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
-	priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
-	priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
-	priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
-
-	priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
-}
-
-/*
  * transmit a CAN message
  * message layout in the sk_buff should be like this:
  * xx xx xx xx	 ff	 ll   00 11 22 33 44 55 66 77