drm/i915: Trick CL2 into life on CHV when using pipe B with port B

Normmally the common lane in a PHY channel gets powered up when some
of the data lanes get powered up. But when we're driving port B with
pipe B we don't want to enabled any of the data lanes, and just want
the DPLL in the common lane to be active.

To make that happens we have to temporarily enable some data lanes
after which we can access the DPLL registers in the common lane. Once
the pipe is up and running we can drop the power override on the data
lanes allowing them to shut down. From this point forward the common
lane will in fact stay powered on until the data lanes in the other
channel get powered down.

Ville's extended explanation from the review thread:

On Wed, Aug 19, 2015 at 07:47:41AM +0530, Deepak wrote:
> One Q, why only for port B? Port C is also in same common lane right?

Port B is in the first PHY channel which also houses CL1. CL1 always
powers up whenever any lanes in either PHY channel are powered up.
CL2 only powers up if lanes in the second channel (ie. the one with
port C) powers up.

So in this scenario (pipe B->port B) we want the DPLL from CL2, but
ideally we only want to power up the lanes for port B. Powering up
port B lanes will only power up CL1, but as we need CL2 instead we
need to, temporarily, power up some lanes in port C as well.

Crossing the streams the other way (pipe A->port C) is not a problem
since CL1 powers up whenever anything else powers up. So powering up
some port C lanes is enough on its own to make the CL1 DPLL
operational, even though CL1 and the lanes live in separate channels.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
[danvet: Amend commit message with extended explanation.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 3 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index df420d892ffe..72c1181bd7f5 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -779,6 +779,7 @@ struct intel_digital_port {
 	struct intel_dp dp;
 	struct intel_hdmi hdmi;
 	enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool);
+	bool release_cl2_override;
 };
 
 struct intel_dp_mst_encoder {
@@ -1363,6 +1364,8 @@ void intel_display_set_init_power(struct drm_i915_private *dev, bool enable);
 
 void chv_phy_powergate_lanes(struct intel_encoder *encoder,
 			     bool override, unsigned int mask);
+bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
+			  enum dpio_channel ch, bool override);
 
 
 /* intel_pm.c */