aboutsummaryrefslogtreecommitdiff
path: root/drivers/firewire
diff options
context:
space:
mode:
authorYOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>2013-03-25 08:26:16 +0000
committerDavid S. Miller <davem@davemloft.net>2013-03-26 12:32:13 -0400
commit6752c8db8e0cfedb44ba62806dd15b383ed64000 (patch)
tree96272aed0ff52f72a1d97d8a8d86d90f5f47809e /drivers/firewire
parent61a7839a19c157d11930fe69697a4c90884bf7c4 (diff)
downloadlinux-linaro-stable-6752c8db8e0cfedb44ba62806dd15b383ed64000.tar.gz
firewire net, ipv4 arp: Extend hardware address and remove driver-level packet inspection.
Inspection of upper layer protocol is considered harmful, especially if it is about ARP or other stateful upper layer protocol; driver cannot (and should not) have full state of them. IPv4 over Firewire module used to inspect ARP (both in sending path and in receiving path), and record peer's GUID, max packet size, max speed and fifo address. This patch removes such inspection by extending our "hardware address" definition to include other information as well: max packet size, max speed and fifo. By doing this, The neighbour module in networking subsystem can cache them. Note: As we have started ignoring sspd and max_rec in ARP/NDP, those information will not be used in the driver when sending. When a packet is being sent, the IP layer fills our pseudo header with the extended "hardware address", including GUID and fifo. The driver can look-up node-id (the real but rather volatile low-level address) by GUID, and then the module can send the packet to the wire using parameters provided in the extendedn hardware address. This approach is realistic because IP over IEEE1394 (RFC2734) and IPv6 over IEEE1394 (RFC3146) share same "hardware address" format in their address resolution protocols. Here, extended "hardware address" is defined as follows: union fwnet_hwaddr { u8 u[16]; struct { __be64 uniq_id; /* EUI-64 */ u8 max_rec; /* max packet size */ u8 sspd; /* max speed */ __be16 fifo_hi; /* hi 16bits of FIFO addr */ __be32 fifo_lo; /* lo 32bits of FIFO addr */ } __packed uc; }; Note that Hardware address is declared as union, so that we can map full IP address into this, when implementing MCAP (Multicast Cannel Allocation Protocol) for IPv6, but IP and ARP subsystem do not need to know this format in detail. One difference between original ARP (RFC826) and 1394 ARP (RFC2734) is that 1394 ARP Request/Reply do not contain the target hardware address field (aka ar$tha). This difference is handled in the ARP subsystem. CC: Stephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/firewire')
-rw-r--r--drivers/firewire/net.c153
1 files changed, 26 insertions, 127 deletions
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index cb8aa865ff88..790017eb5051 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -28,6 +28,7 @@
#include <asm/unaligned.h>
#include <net/arp.h>
+#include <net/firewire.h>
/* rx limits */
#define FWNET_MAX_FRAGMENTS 30 /* arbitrary, > TX queue depth */
@@ -57,33 +58,6 @@
#define RFC2374_HDR_LASTFRAG 2 /* last fragment */
#define RFC2374_HDR_INTFRAG 3 /* interior fragment */
-#define RFC2734_HW_ADDR_LEN 16
-
-struct rfc2734_arp {
- __be16 hw_type; /* 0x0018 */
- __be16 proto_type; /* 0x0806 */
- u8 hw_addr_len; /* 16 */
- u8 ip_addr_len; /* 4 */
- __be16 opcode; /* ARP Opcode */
- /* Above is exactly the same format as struct arphdr */
-
- __be64 s_uniq_id; /* Sender's 64bit EUI */
- u8 max_rec; /* Sender's max packet size */
- u8 sspd; /* Sender's max speed */
- __be16 fifo_hi; /* hi 16bits of sender's FIFO addr */
- __be32 fifo_lo; /* lo 32bits of sender's FIFO addr */
- __be32 sip; /* Sender's IP Address */
- __be32 tip; /* IP Address of requested hw addr */
-} __packed;
-
-/* This header format is specific to this driver implementation. */
-#define FWNET_ALEN 8
-#define FWNET_HLEN 10
-struct fwnet_header {
- u8 h_dest[FWNET_ALEN]; /* destination address */
- __be16 h_proto; /* packet type ID field */
-} __packed;
-
static bool fwnet_hwaddr_is_multicast(u8 *ha)
{
return !!(*ha & 1);
@@ -196,8 +170,6 @@ struct fwnet_peer {
struct list_head peer_link;
struct fwnet_device *dev;
u64 guid;
- u64 fifo;
- __be32 ip;
/* guarded by dev->lock */
struct list_head pd_list; /* received partial datagrams */
@@ -227,6 +199,15 @@ struct fwnet_packet_task {
};
/*
+ * Get fifo address embedded in hwaddr
+ */
+static __u64 fwnet_hwaddr_fifo(union fwnet_hwaddr *ha)
+{
+ return (u64)get_unaligned_be16(&ha->uc.fifo_hi) << 32
+ | get_unaligned_be32(&ha->uc.fifo_lo);
+}
+
+/*
* saddr == NULL means use device source address.
* daddr == NULL means leave destination address (eg unresolved arp).
*/
@@ -518,7 +499,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
bool is_broadcast, u16 ether_type)
{
struct fwnet_device *dev;
- static const __be64 broadcast_hw = cpu_to_be64(~0ULL);
int status;
__be64 guid;
@@ -537,76 +517,11 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
/*
* Parse the encapsulation header. This actually does the job of
- * converting to an ethernet frame header, as well as arp
- * conversion if needed. ARP conversion is easier in this
- * direction, since we are using ethernet as our backend.
- */
- /*
- * If this is an ARP packet, convert it. First, we want to make
- * use of some of the fields, since they tell us a little bit
- * about the sending machine.
+ * converting to an ethernet-like pseudo frame header.
*/
- if (ether_type == ETH_P_ARP) {
- struct rfc2734_arp *arp1394;
- struct arphdr *arp;
- unsigned char *arp_ptr;
- u64 fifo_addr;
- u64 peer_guid;
- struct fwnet_peer *peer;
- unsigned long flags;
-
- arp1394 = (struct rfc2734_arp *)skb->data;
- arp = (struct arphdr *)skb->data;
- arp_ptr = (unsigned char *)(arp + 1);
- peer_guid = get_unaligned_be64(&arp1394->s_uniq_id);
- fifo_addr = (u64)get_unaligned_be16(&arp1394->fifo_hi) << 32
- | get_unaligned_be32(&arp1394->fifo_lo);
-
- spin_lock_irqsave(&dev->lock, flags);
- peer = fwnet_peer_find_by_guid(dev, peer_guid);
- if (peer) {
- peer->fifo = fifo_addr;
- peer->ip = arp1394->sip;
- }
- spin_unlock_irqrestore(&dev->lock, flags);
-
- if (!peer) {
- dev_notice(&net->dev,
- "no peer for ARP packet from %016llx\n",
- (unsigned long long)peer_guid);
- goto no_peer;
- }
-
- /*
- * Now that we're done with the 1394 specific stuff, we'll
- * need to alter some of the data. Believe it or not, all
- * that needs to be done is sender_IP_address needs to be
- * moved, the destination hardware address get stuffed
- * in and the hardware address length set to 8.
- *
- * IMPORTANT: The code below overwrites 1394 specific data
- * needed above so keep the munging of the data for the
- * higher level IP stack last.
- */
-
- arp->ar_hln = 8;
- /* skip over sender unique id */
- arp_ptr += arp->ar_hln;
- /* move sender IP addr */
- put_unaligned(arp1394->sip, (u32 *)arp_ptr);
- /* skip over sender IP addr */
- arp_ptr += arp->ar_pln;
-
- if (arp->ar_op == htons(ARPOP_REQUEST))
- memset(arp_ptr, 0, sizeof(u64));
- else
- memcpy(arp_ptr, net->dev_addr, sizeof(u64));
- }
-
- /* Now add the ethernet header. */
guid = cpu_to_be64(dev->card->guid);
if (dev_hard_header(skb, net, ether_type,
- is_broadcast ? &broadcast_hw : &guid,
+ is_broadcast ? net->broadcast : net->dev_addr,
NULL, skb->len) >= 0) {
struct fwnet_header *eth;
u16 *rawp;
@@ -649,7 +564,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
return 0;
- no_peer:
err:
net->stats.rx_errors++;
net->stats.rx_dropped++;
@@ -1355,11 +1269,12 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
ptask->dest_node = IEEE1394_ALL_NODES;
ptask->speed = SCODE_100;
} else {
- __be64 guid = get_unaligned((__be64 *)hdr_buf.h_dest);
+ union fwnet_hwaddr *ha = (union fwnet_hwaddr *)hdr_buf.h_dest;
+ __be64 guid = get_unaligned(&ha->uc.uniq_id);
u8 generation;
peer = fwnet_peer_find_by_guid(dev, be64_to_cpu(guid));
- if (!peer || peer->fifo == FWNET_NO_FIFO_ADDR)
+ if (!peer)
goto fail;
generation = peer->generation;
@@ -1367,32 +1282,12 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
max_payload = peer->max_payload;
datagram_label_ptr = &peer->datagram_label;
- ptask->fifo_addr = peer->fifo;
+ ptask->fifo_addr = fwnet_hwaddr_fifo(ha);
ptask->generation = generation;
ptask->dest_node = dest_node;
ptask->speed = peer->speed;
}
- /* If this is an ARP packet, convert it */
- if (proto == htons(ETH_P_ARP)) {
- struct arphdr *arp = (struct arphdr *)skb->data;
- unsigned char *arp_ptr = (unsigned char *)(arp + 1);
- struct rfc2734_arp *arp1394 = (struct rfc2734_arp *)skb->data;
- __be32 ipaddr;
-
- ipaddr = get_unaligned((__be32 *)(arp_ptr + FWNET_ALEN));
-
- arp1394->hw_addr_len = RFC2734_HW_ADDR_LEN;
- arp1394->max_rec = dev->card->max_receive;
- arp1394->sspd = dev->card->link_speed;
-
- put_unaligned_be16(dev->local_fifo >> 32,
- &arp1394->fifo_hi);
- put_unaligned_be32(dev->local_fifo & 0xffffffff,
- &arp1394->fifo_lo);
- put_unaligned(ipaddr, &arp1394->sip);
- }
-
ptask->hdr.w0 = 0;
ptask->hdr.w1 = 0;
ptask->skb = skb;
@@ -1507,8 +1402,6 @@ static int fwnet_add_peer(struct fwnet_device *dev,
peer->dev = dev;
peer->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
- peer->fifo = FWNET_NO_FIFO_ADDR;
- peer->ip = 0;
INIT_LIST_HEAD(&peer->pd_list);
peer->pdg_size = 0;
peer->datagram_label = 0;
@@ -1538,6 +1431,7 @@ static int fwnet_probe(struct device *_dev)
struct fwnet_device *dev;
unsigned max_mtu;
int ret;
+ union fwnet_hwaddr *ha;
mutex_lock(&fwnet_device_mutex);
@@ -1582,8 +1476,15 @@ static int fwnet_probe(struct device *_dev)
net->mtu = min(1500U, max_mtu);
/* Set our hardware address while we're at it */
- put_unaligned_be64(card->guid, net->dev_addr);
- put_unaligned_be64(~0ULL, net->broadcast);
+ ha = (union fwnet_hwaddr *)net->dev_addr;
+ put_unaligned_be64(card->guid, &ha->uc.uniq_id);
+ ha->uc.max_rec = dev->card->max_receive;
+ ha->uc.sspd = dev->card->link_speed;
+ put_unaligned_be16(dev->local_fifo >> 32, &ha->uc.fifo_hi);
+ put_unaligned_be32(dev->local_fifo & 0xffffffff, &ha->uc.fifo_lo);
+
+ memset(net->broadcast, -1, net->addr_len);
+
ret = register_netdev(net);
if (ret)
goto out;
@@ -1632,8 +1533,6 @@ static int fwnet_remove(struct device *_dev)
mutex_lock(&fwnet_device_mutex);
net = dev->netdev;
- if (net && peer->ip)
- arp_invalidate(net, peer->ip);
fwnet_remove_peer(peer, dev);