diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-05 13:44:27 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-04-05 13:44:27 -0700 |
| commit | 9f800363bb0ea459e15bef0928a72c88d374e489 (patch) | |
| tree | 13a6b4165d3e2ba18e88e5103437f74e84e0838d /arch | |
| parent | 2d1eb87ae1e6f3999e77989fd2f831b134270787 (diff) | |
| parent | cb46a256a78225817945cd52068d61d5126c236e (diff) | |
Merge tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
"Lots of isolated bug fixes that were not found to be important enough
to be submitted before the merge window or backported into stable
kernels.
The vast majority of these came out of Arnd's randconfig testing and
just prevents running into build-time bugs in configurations that we
do not care about in practice"
* tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
ARM: at91: fix a typo
ARM: moxart: fix CPU selection
ARM: tegra: fix board DT pinmux setup
ARM: nspire: Fix compiler warning
IXP4xx: Fix DMA masks.
Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation"
IXP4xx: Fix Goramo Multilink GPIO conversion.
Revert "ARM: ixp4xx: fix gpio rework"
ARM: tegra: make debug_ll code build for ARMv6
ARM: sunxi: fix build for THUMB2_KERNEL
ARM: exynos: add missing include of linux/module.h
ARM: exynos: fix l2x0 saved regs handling
ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
ARM: samsung: select ATAGS where necessary
ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
ARM: samsung: allow serial driver to be disabled
ARM: s5pv210: enable IDE support in MACH_TORBRECK
ARM: s5p64x0: fix building with only one soc type
ARM: s3c64xx: select power domains only when used
ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
...
Diffstat (limited to 'arch')
74 files changed, 343 insertions, 263 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6b4ac5de6dec..79bea0b34d1f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -423,6 +423,7 @@ config ARCH_EFM32 bool "Energy Micro efm32" depends on !MMU select ARCH_REQUIRE_GPIOLIB + select AUTO_ZRELADDR select ARM_NVIC # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged, # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO @@ -698,6 +699,7 @@ config ARCH_RPC select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select CPU_SA110 select FIQ select HAVE_IDE select HAVE_PATA_PLATFORM @@ -732,6 +734,7 @@ config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select GENERIC_CLOCKEVENTS @@ -754,6 +757,7 @@ config ARCH_S3C64XX select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select COMMON_CLK @@ -765,7 +769,7 @@ config ARCH_S3C64XX select HAVE_TCM select NO_IOPORT select PLAT_SAMSUNG - select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS if PM select S3C_DEV_NAND select S3C_GPIO_TRACK select SAMSUNG_ATAGS @@ -776,6 +780,7 @@ config ARCH_S3C64XX config ARCH_S5P64X0 bool "Samsung S5P6440 S5P6450" + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V6 @@ -794,6 +799,7 @@ config ARCH_S5P64X0 config ARCH_S5PC100 bool "Samsung S5PC100" select ARCH_REQUIRE_GPIOLIB + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V7 @@ -813,6 +819,7 @@ config ARCH_S5PV210 select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE + select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select CPU_V7 @@ -886,6 +893,12 @@ menu "Multiple platform selection" comment "CPU Core family selection" +config ARCH_MULTI_V4 + bool "ARMv4 based platforms (FA526)" + depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 + select CPU_FA526 + config ARCH_MULTI_V4T bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" depends on !ARCH_MULTI_V6_V7 diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 6d95d3df33c7..79087ccf64bc 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -448,7 +448,7 @@ ti,hwmods = "usb_otg_hs"; status = "disabled"; - usb_ctrl_mod: control@44e10000 { + usb_ctrl_mod: control@44e10620 { compatible = "ti,am335x-usb-ctrl-module"; reg = <0x44e10620 0x10 0x44e10648 0x4>; @@ -551,7 +551,7 @@ "tx14", "tx15"; }; - cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index b42e658876e5..457112d659ea 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -287,6 +287,7 @@ regulator-name = "vdd_g3d"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-always-on; regulator-boot-on; op_mode = <1>; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index d3f8a6e8ca20..69409f7e05dc 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -275,6 +275,8 @@ gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; ti,no-idle-on-init; + clocks = <&l3_div_ck>; + clock-names = "fck"; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index a72813a9663e..7a16647c76f4 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -302,6 +302,8 @@ gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 73aecfb57ccb..eb54353975bc 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -715,7 +715,6 @@ nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; @@ -725,7 +724,6 @@ nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <22>; nvidia,pull-up-strength = <36>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index c6dcef513e5d..0b54743c2621 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -138,14 +138,9 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0", - "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; + nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; @@ -423,7 +418,6 @@ nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <32>; nvidia,pull-up-strength = <42>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; @@ -433,7 +427,6 @@ nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <20>; nvidia,pull-up-strength = <36>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index ab2f7378352c..932b932c8856 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -198,3 +198,5 @@ CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_CRC_T10DIF=m +CONFIG_GPIO_PCA953X=y +CONFIG_KEYBOARD_GPIO_POLLED=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index dbe1f1c47bb0..4ce7b70ea901 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -94,7 +94,7 @@ CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_S5P=y +CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y CONFIG_USB_PHY=y diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 22a3b9b5d4a1..4157aec4e307 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -74,6 +74,7 @@ struct secondary_data { }; extern struct secondary_data secondary_data; extern volatile int pen_release; +extern void secondary_startup(void); extern int __cpu_disable(void); diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S index f98763f0bc17..3bc80599c022 100644 --- a/arch/arm/include/debug/tegra.S +++ b/arch/arm/include/debug/tegra.S @@ -53,8 +53,7 @@ #define checkuart(rp, rv, lhu, bit, uart) \ /* Load address of CLK_RST register */ \ - movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \ - movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \ + ldr rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \ /* Load value from CLK_RST register */ \ ldr rp, [rp, #0] ; \ /* Test UART's reset bit */ \ @@ -62,8 +61,7 @@ /* If set, can't use UART; jump to save no UART */ \ bne 90f ; \ /* Load address of CLK_OUT_ENB register */ \ - movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \ - movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \ + ldr rp, =TEGRA_CLK_OUT_ENB_##lhu ; \ /* Load value from CLK_OUT_ENB register */ \ ldr rp, [rp, #0] ; \ /* Test UART's clock enable bit */ \ @@ -71,8 +69,7 @@ /* If clear, can't use UART; jump to save no UART */ \ beq 90f ; \ /* Passed all tests, load address of UART registers */ \ - movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \ - movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \ + ldr rp, =TEGRA_UART##uart##_BASE ; \ /* Jump to save UART address */ \ b 91f @@ -90,15 +87,16 @@ #ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA /* Check ODMDATA */ -10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff - movt \rp, #TEGRA_PMC_SCRATCH20 >> 16 +10: ldr \rp, =TEGRA_PMC_SCRATCH20 ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20 - ubfx \rv, \rp, #18, #2 @ 19:18 are console type + lsr \rv, \rp, #18 @ 19:18 are console type + and \rv, \rv, #3 cmp \rv, #2 @ 2 and 3 mean DCC, UART beq 11f @ some boards swap the meaning cmp \rv, #3 @ so accept either bne 90f -11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID +11: lsr \rv, \rp, #15 @ 17:15 are UART ID + and \rv, #7 cmp \rv, #0 @ UART 0? beq 20f cmp \rv, #1 @ UART 1? diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4f0e800e7e71..9968f208b7df 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -57,6 +57,7 @@ config SOC_SAMA5 select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER select SPARSE_IRQ + select USE_OF menu "Atmel AT91 System-on-Chip" @@ -64,11 +65,22 @@ choice prompt "Core type" +config ARCH_AT91X40 + bool "ARM7 AT91X40" + depends on !MMU + select CPU_ARM7TDMI + select ARCH_USES_GETTIMEOFFSET + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + + help + Select this if you are using one of Atmel's AT91X40 SoC. + config SOC_SAM_V4_V5 - bool "ARM7/ARM9" + bool "ARM9 AT91SAM9/AT91RM9200" help - Select this if you are using one of Atmel's AT91SAM9, AT91RM9200 - or AT91X40 SoC. + Select this if you are using one of Atmel's AT91SAM9 or + AT91RM9200 SoC. config SOC_SAM_V7 bool "Cortex A5" @@ -179,9 +191,12 @@ config SOC_AT91SAM9N12 Select this if you are using Atmel's AT91SAM9N12 SoC. # ---------------------------------------------------------- +endif # SOC_SAM_V4_V5 + +if SOC_SAM_V4_V5 || ARCH_AT91X40 source arch/arm/mach-at91/Kconfig.non_dt -endif # SOC_SAM_V4_V5 +endif comment "Generic Board Type" diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 1f73e9b527da..44ace320d2e1 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -5,6 +5,7 @@ config HAVE_AT91_DATAFLASH_CARD choice prompt "Atmel AT91 Processor Devices for non DT boards" + depends on !ARCH_AT91X40 config ARCH_AT91_NONE bool "None" @@ -39,13 +40,6 @@ config ARCH_AT91SAM9G45 select SOC_AT91SAM9G45 select AT91_USE_OLD_CLK -config ARCH_AT91X40 - bool "AT91x40" - depends on !MMU - select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - endchoice config ARCH_AT91SAM9G20 diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index eda8d1679d40..1630ae64d3fb 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1255,12 +1255,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */ at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */ - if (data->flags & AT91_CF_TRUE_IDE) -#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) + if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE)) pdev->name = "pata_at91"; -#else -#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91" -#endif else pdev->name = "at91_cf"; diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c index b26156bf15db..826315af6d11 100644 --- a/arch/arm/mach-at91/sam9_smc.c +++ b/arch/arm/mach-at91/sam9_smc.c @@ -36,6 +36,7 @@ void sam9_smc_write_mode(int id, int cs, { sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); } +EXPORT_SYMBOL_GPL(sam9_smc_write_mode); static void sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config *config) @@ -69,6 +70,7 @@ void sam9_smc_configure(int id, int cs, { sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); } +EXPORT_SYMBOL_GPL(sam9_smc_configure); static void sam9_smc_cs_read_mode(void __iomem *base, struct sam9_smc_config *config) @@ -84,6 +86,7 @@ void sam9_smc_read_mode(int id, int cs, { sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); } +EXPORT_SYMBOL_GPL(sam9_smc_read_mode); static void sam9_smc_cs_read(void __iomem *base, struct sam9_smc_config *config) diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index f7ca97b7291e..f7a07a58ebb6 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -351,7 +351,7 @@ void __init at91_ioremap_matrix(u32 base_addr) panic("Impossible to ioremap at91_matrix_base\n"); } -#if defined(CONFIG_OF) +#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40) static struct of_device_id rstc_ids[] = { { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart }, { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index f8d71a89644a..5f831133178f 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -73,7 +73,7 @@ #define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ #define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) #define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) -#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 3) +#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 4) /* LCD contrast digital potentiometer */ #define AUTCPU12_DPOT_CS CLPS711X_GPIO(4, 0) diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index ce096d678aa4..d863d8729edc 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -246,7 +246,6 @@ static void __init cns3420_map_io(void) MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") .atag_offset = 0x100, - .nr_irqs = NR_IRQS_CNS3XXX, .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 384dc859e6c6..2ae28a69e3e5 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -47,6 +47,38 @@ static struct map_desc cns3xxx_io_desc[] __initdata = { .pfn = __phys_to_pfn(CNS3XXX_PM_BASE), .length = SZ_4K, .type = MT_DEVICE, +#ifdef CONFIG_PCI + }, { + .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE), + .length = SZ_64K, /* really 4 KiB at offset 32 KiB */ + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE), + .length = SZ_64K, /* really 4 KiB at offset 32 KiB */ + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE), + .length = SZ_16M, + .type = MT_DEVICE, +#endif }, }; @@ -368,7 +400,6 @@ static const char *cns3xxx_dt_compat[] __initdata = { DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx") .dt_compat = cns3xxx_dt_compat, - .nr_irqs = NR_IRQS_CNS3XXX, .map_io = cns3xxx_map_io, .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index c7b204bff386..413134c54452 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -23,15 +23,10 @@ #include "cns3xxx.h" #include "core.h" -enum cns3xxx_access_type { - CNS3XXX_HOST_TYPE = 0, - CNS3XXX_CFG0_TYPE, - CNS3XXX_CFG1_TYPE, - CNS3XXX_NUM_ACCESS_TYPES, -}; - struct cns3xxx_pcie { - struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES]; + void __iomem *host_regs; /* PCI config registers for host bridge */ + void __iomem *cfg0_regs; /* PCI Type 0 config registers */ + void __iomem *cfg1_regs; /* PCI Type 1 config registers */ unsigned int irqs[2]; struct resource res_io; struct resource res_mem; @@ -66,7 +61,6 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus, int busno = bus->number; int slot = PCI_SLOT(devfn); int offset; - enum cns3xxx_access_type type; void __iomem *base; /* If there is no link, just show the CNS PCI bridge. */ @@ -78,17 +72,21 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus, * we still want to access it. For this to work, we must place * the first device on the same bus as the CNS PCI bridge. */ - if (busno == 0) { - if (slot > 1) - return NULL; - type = slot; - } else { - type = CNS3XXX_CFG1_TYPE; - } + if (busno == 0) { /* directly connected PCIe bus */ + switch (slot) { + case 0: /* host bridge device, function 0 only */ + base = cnspci->host_regs; + break; + case 1: /* directly connected device */ + base = cnspci->cfg0_regs; + break; + default: + return NULL; /* no such device */ + } + } else /* remote PCI bus */ + base = cnspci->cfg1_regs; - base = (void __iomem *)cnspci->cfg_bases[type].virtual; offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc); - return base + offset; } @@ -180,36 +178,19 @@ static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) static struct cns3xxx_pcie cns3xxx_pcie[] = { [0] = { - .cfg_bases = { - [CNS3XXX_HOST_TYPE] = { - .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - [CNS3XXX_CFG0_TYPE] = { - .virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - [CNS3XXX_CFG1_TYPE] = { - .virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - }, + .host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT, + .cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT, + .cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT, .res_io = { .name = "PCIe0 I/O space", .start = CNS3XXX_PCIE0_IO_BASE, - .end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1, + .end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */ .flags = IORESOURCE_IO, }, .res_mem = { .name = "PCIe0 non-prefetchable", .start = CNS3XXX_PCIE0_MEM_BASE, - .end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1, + .end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */ .flags = IORESOURCE_MEM, }, .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, }, @@ -222,36 +203,19 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = { }, }, [1] = { - .cfg_bases = { - [CNS3XXX_HOST_TYPE] = { - .virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - [CNS3XXX_CFG0_TYPE] = { - .virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - [CNS3XXX_CFG1_TYPE] = { - .virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE), - .length = SZ_16M, - .type = MT_DEVICE, - }, - }, + .host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT, + .cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT, + .cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT, .res_io = { .name = "PCIe1 I/O space", .start = CNS3XXX_PCIE1_IO_BASE, - .end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1, + .end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */ .flags = IORESOURCE_IO, }, .res_mem = { .name = "PCIe1 non-prefetchable", .start = CNS3XXX_PCIE1_MEM_BASE, - .end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1, + .end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */ .flags = IORESOURCE_MEM, }, .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, }, @@ -307,18 +271,15 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) .ops = &cns3xxx_pcie_ops, .sysdata = &sd, }; - u32 io_base = cnspci->res_io.start >> 16; - u32 mem_base = cnspci->res_mem.start >> 16; - u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn; - u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn; + u16 mem_base = cnspci->res_mem.start >> 16; + u16 mem_limit = cnspci->res_mem.end >> 16; + u16 io_base = cnspci->res_io.start >> 16; + u16 io_limit = cnspci->res_io.end >> 16; u32 devfn = 0; u8 tmp8; u16 pos; u16 dc; - host_base = (__pfn_to_phys(host_base) - 1) >> 16; - cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16; - pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0); pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1); pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1); @@ -328,9 +289,9 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8); pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base); - pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base); + pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit); pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base); - pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base); + pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit); if (!cnspci->linked) return; @@ -368,8 +329,6 @@ static int __init cns3xxx_pcie_init(void) "imprecise external abort"); for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { - iotable_init(cns3xxx_pcie[i].cfg_bases, - ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases)); cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i)); cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i)); cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index a075b3e0c5c7..626d2b82d0f3 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -214,11 +214,6 @@ config DA850_WL12XX Say Y if you want to use a wl1271 expansion card connected to the AM18x EVM. -config GPIO_PCA953X - default MACH_DAVINCI_DA850_EVM - -config KEYBOARD_GPIO_POLLED - default MACH_DAVINCI_DA850_EVM config MACH_TNETV107X bool "TI TNETV107X Reference Platform" diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 987605b78556..3de4dc9a1698 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -799,11 +799,12 @@ static __init void davinci_evm_init(void) /* irlml6401 switches over 1A, in under 8 msec */ davinci_setup_usb(1000, 8); - soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; - /* Register the fixup for PHY on DaVinci */ - phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, - davinci_phy_fixup); - + if (IS_BUILTIN(CONFIG_PHYLIB)) { + soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } } MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 157ba88433c9..fd021ba539fe 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -242,6 +242,7 @@ unsigned int ep93xx_chip_revision(void) v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; return v; } +EXPORT_SYMBOL_GPL(ep93xx_chip_revision); /************************************************************************* * EP93xx GPIO diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index f18be40e5b21..8d0042c9d4d3 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -404,8 +404,10 @@ static int __init exynos4_l2x0_cache_init(void) if (ret) return ret; - l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); - clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); + if (IS_ENABLED(CONFIG_S5P_SLEEP)) { + l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs); + clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long)); + } return 0; } early_initcall(exynos4_l2x0_cache_init); diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index f57cb91f02aa..93d2decc112d 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -14,6 +14,7 @@ #include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/export.h> +#include <linux/module.h> #include <linux/time.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index fba55fb9f47d..07152d00fc50 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -52,6 +52,7 @@ config ARCH_EBSA285_HOST select FOOTBRIDGE_HOST select ISA select ISA_DMA + select ARCH_MAY_HAVE_PC_FDC select PCI help Say Y here if you intend to run this kernel on the EBSA285 card @@ -94,6 +95,5 @@ config FOOTBRIDGE_ADDIN # EBSA285 board in either host or addin mode config ARCH_EBSA285 bool - select ARCH_MAY_HAVE_PC_FDC endif diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 0b64dd430d61..c3faa3bc84dd 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -4,11 +4,12 @@ # Object file lists. -obj-y := common.o dc21285.o dma.o isa-irq.o +obj-y := common.o dma.o isa-irq.o obj-m := obj-n := obj- := +pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index 9669cc0b6318..da0415094856 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -78,9 +78,11 @@ __initcall(cats_hw_init); static void __init fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) { +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) screen_info.orig_video_lines = 25; screen_info.orig_video_points = 16; screen_info.orig_y = 24; +#endif } MACHINE_START(CATS, "Chalice-CATS") diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile index 6870058d0a48..2ae1b59267c2 100644 --- a/arch/arm/mach-hisi/Makefile +++ b/arch/arm/mach-hisi/Makefile @@ -3,5 +3,4 @@ # obj-y += hisilicon.o -obj-$(CONFIG_SMP) += platsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_SMP) += platsmp.o hotplug.o diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index b909854eee7f..abd441b0c604 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -178,6 +178,7 @@ static inline void cpu_enter_lowpower(void) : "cc"); } +#ifdef CONFIG_HOTPLUG_CPU void hi3xxx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); @@ -198,3 +199,4 @@ int hi3xxx_cpu_kill(unsigned int cpu) hi3xxx_set_cpu(cpu, false); return 1; } +#endif diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index abeff25532ab..271a255864d2 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -6,8 +6,8 @@ config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select CLKSRC_MMIO select MIGHT_HAVE_PCI - select SERIAL_AMBA_PL010 - select SERIAL_AMBA_PL010_CONSOLE + select SERIAL_AMBA_PL010 if TTY + select SERIAL_AMBA_PL010_CONSOLE if TTY select SOC_BUS help Include support for the ARM(R) Integrator/AP and @@ -18,8 +18,8 @@ config ARCH_INTEGRATOR_CP select ARCH_CINTEGRATOR select ARM_TIMER_SP804 select PLAT_VERSATILE_CLCD - select SERIAL_AMBA_PL011 - select SERIAL_AMBA_PL011_CONSOLE + select SERIAL_AMBA_PL011 if TTY + select SERIAL_AMBA_PL011_CONSOLE if TTY select SOC_BUS help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 200970d56f6d..4977296f0c78 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -315,33 +315,6 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r return 0; } - -static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - return (dma_addr + size) >= SZ_64M; -} - -/* - * Setup DMA mask to 64MB on PCI devices. Ignore all other devices. - */ -static int ixp4xx_pci_platform_notify(struct device *dev) -{ - if (dev_is_pci(dev)) { - *dev->dma_mask = SZ_64M - 1; - dev->coherent_dma_mask = SZ_64M - 1; - dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); - } - return 0; -} - -static int ixp4xx_pci_platform_notify_remove(struct device *dev) -{ - if (dev_is_pci(dev)) - dmabounce_unregister_dev(dev); - - return 0; -} - void __init ixp4xx_pci_preinit(void) { unsigned long cpuid = read_cpuid_id(); @@ -475,20 +448,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); - platform_notify = ixp4xx_pci_platform_notify; - platform_notify_remove = ixp4xx_pci_platform_notify_remove; - return 1; } -int dma_set_coherent_mask(struct device *dev, u64 mask) -{ - if (mask >= SZ_64M - 1) - return 0; - - return -EIO; -} - EXPORT_SYMBOL(ixp4xx_pci_read); EXPORT_SYMBOL(ixp4xx_pci_write); -EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index a465f27bc263..be882c95bd36 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -30,8 +30,8 @@ #include <linux/export.h> #include <linux/gpio.h> #include <linux/cpu.h> +#include <linux/pci.h> #include <linux/sched_clock.h> - #include <mach/udc.h> #include <mach/hardware.h> #include <mach/io.h> @@ -40,7 +40,6 @@ #include <asm/page.h> #include <asm/irq.h> #include <asm/system_misc.h> - #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> @@ -578,6 +577,54 @@ void ixp4xx_restart(enum reboot_mode mode, const char *cmd) } } +#ifdef CONFIG_PCI +static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + return (dma_addr + size) > SZ_64M; +} + +static int ixp4xx_platform_notify_remove(struct device *dev) +{ + if (dev_is_pci(dev)) + dmabounce_unregister_dev(dev); + + return 0; +} +#endif + +/* + * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things. + */ +static int ixp4xx_platform_notify(struct device *dev) +{ + dev->dma_mask = &dev->coherent_dma_mask; + +#ifdef CONFIG_PCI + if (dev_is_pci(dev)) { + dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */ + dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); + return 0; + } +#endif + + dev->coherent_dma_mask = DMA_BIT_MASK(32); + return 0; +} + +int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + if (dev_is_pci(dev)) + mask &= DMA_BIT_MASK(28); /* 64 MB */ + + if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) { + dev->coherent_dma_mask = mask; + return 0; + } + + return -EIO; /* device wanted sub-64MB mask */ +} +EXPORT_SYMBOL(dma_set_coherent_mask); + #ifdef CONFIG_IXP4XX_INDIRECT_PCI /* * In the case of using indirect PCI, we simply return the actual PCI @@ -600,12 +647,16 @@ static void ixp4xx_iounmap(void __iomem *addr) if (!is_pci_memory((__force u32)addr)) __iounmap(addr); } +#endif void __init ixp4xx_init_early(void) { + platform_notify = ixp4xx_platform_notify; +#ifdef CONFIG_PCI + platform_notify_remove = ixp4xx_platform_notify_remove; +#endif +#ifdef CONFIG_IXP4XX_INDIRECT_PCI arch_ioremap_caller = ixp4xx_ioremap_caller; arch_iounmap = ixp4xx_iounmap; -} -#else -void __init ixp4xx_init_early(void) {} #endif +} diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index e54ff491c105..80bd9d6d04de 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -4,6 +4,7 @@ */ #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/hdlc.h> #include <linux/i2c-gpio.h> #include <linux/io.h> @@ -79,19 +80,19 @@ static u8 control_value; static void set_scl(u8 value) { - gpio_line_set(GPIO_SCL, !!value); + gpio_set_value(GPIO_SCL, !!value); udelay(3); } static void set_sda(u8 value) { - gpio_line_set(GPIO_SDA, !!value); + gpio_set_value(GPIO_SDA, !!value); udelay(3); } static void set_str(u8 value) { - gpio_line_set(GPIO_STR, !!value); + gpio_set_value(GPIO_STR, !!value); udelay(3); } @@ -108,8 +109,8 @@ static void output_control(void) { int i; - gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); + gpio_direction_output(GPIO_SCL, 1); + gpio_direction_output(GPIO_SDA, 1); for (i = 0; i < 8; i++) { set_scl(0); @@ -151,8 +152,8 @@ static int hss_set_clock(int port, unsigned int clock_type) static irqreturn_t hss_dcd_irq(int irq, void *pdev) { - int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N)); - gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N)); + int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); set_carrier_cb_tab[port](pdev, !i); return IRQ_HANDLED; } @@ -168,7 +169,7 @@ static int hss_open(int port, void *pdev, else irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N); - gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); + i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); set_carrier_cb(pdev, !i); set_carrier_cb_tab[!!port] = set_carrier_cb; @@ -181,7 +182,7 @@ static int hss_open(int port, void *pdev, set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0); output_control(); - gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); + gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); return 0; } @@ -193,7 +194,7 @@ static void hss_close(int port, void *pdev) set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); output_control(); - gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); + gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); } @@ -413,13 +414,21 @@ static void __init gmlr_init(void) if (hw_bits & CFG_HW_HAS_EEPROM) device_tab[devices++] = &device_i2c; /* max index 6 */ - gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT); - gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN); - gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN); + gpio_request(GPIO_SCL, "SCL/clock"); + gpio_request(GPIO_SDA, "SDA/data"); + gpio_request(GPIO_STR, "strobe"); + gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS"); + gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS"); + gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD"); + gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD"); + + gpio_direction_output(GPIO_SCL, 1); + gpio_direction_output(GPIO_SDA, 1); + gpio_direction_output(GPIO_STR, 0); + gpio_direction_output(GPIO_HSS0_RTS_N, 1); + gpio_direction_output(GPIO_HSS1_RTS_N, 1); + gpio_direction_input(GPIO_HSS0_DCD_N); + gpio_direction_input(GPIO_HSS1_DCD_N); irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 5cf30d1b78d2..559c69a47731 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -48,9 +48,10 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); * fallback to the default. */ +extern unsigned long pcibios_min_mem; static inline int is_pci_memory(u32 addr) { - return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF); + return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF); } #define writeb(v, p) __indirect_writeb(v, p) diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c index 75ef03dc9964..2d494b454376 100644 --- a/arch/arm/mach-ixp4xx/omixp-setup.c +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -17,9 +17,7 @@ #include <linux/serial_8250.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#ifdef CONFIG_LEDS_CLASS #include <linux/leds.h> -#endif #include <asm/setup.h> #include <asm/memory.h> diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index 002bc619bb68..f2658168eeff 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -44,7 +44,8 @@ static void __init og_register_pci(void) if (machine_is_im4004()) ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW); - ks8695_init_pci(&og_pci); + if (IS_ENABLED(CONFIG_PCI)) + ks8695_init_pci(&og_pci); } /* diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index d7aa54c25c59..de03620d7fa7 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -99,6 +99,7 @@ u32 lpc32xx_return_iram_size(void) return iram_size; } +EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size); /* * Computes PLL rate from PLL register and input clock diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 0c002099c3a3..7e0248582efd 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -231,7 +231,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { .debounce_interval = 30, }; -#if defined(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_USB_EHCI_MV) static struct mv_usb_platform_data pxa168_sph_pdata = { .mode = MV_USB_MODE_HOST, .phy_init = pxa_usb_phy_init, @@ -258,7 +258,7 @@ static void __init common_init(void) /* off-chip devices */ platform_device_register(&smc91x_device); -#if defined(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_USB_EHCI_MV) pxa168_add_usb_host(&pxa168_sph_pdata); #endif } diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index dd2d8b103cc8..2bcb766af05d 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -72,7 +72,7 @@ int __init pxa_register_device(struct pxa_device_desc *desc, return platform_device_add(pdev); } -#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET) +#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET) /***************************************************************************** * The registers read/write routines @@ -112,9 +112,9 @@ static void u2o_write(void __iomem *base, unsigned int offset, readl_relaxed(base + offset); } -#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV) +#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV) -#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168) +#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168) static DEFINE_MUTEX(phy_lock); static int phy_init_cnt; @@ -238,10 +238,10 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg) #endif #endif -#ifdef CONFIG_USB_SUPPORT +#if IS_ENABLED(CONFIG_USB_SUPPORT) static u64 usb_dma_mask = ~(u32)0; -#ifdef CONFIG_USB_MV_UDC +#if IS_ENABLED(CONFIG_USB_MV_UDC) struct resource pxa168_u2o_resources[] = { /* regbase */ [0] = { @@ -276,7 +276,7 @@ struct platform_device pxa168_device_u2o = { }; #endif /* CONFIG_USB_MV_UDC */ -#ifdef CONFIG_USB_EHCI_MV_U2O +#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) struct resource pxa168_u2oehci_resources[] = { /* regbase */ [0] = { @@ -312,7 +312,7 @@ struct platform_device pxa168_device_u2oehci = { }; #endif -#if defined(CONFIG_USB_MV_OTG) +#if IS_ENABLED(CONFIG_USB_MV_OTG) struct resource pxa168_u2ootg_resources[] = { /* regbase */ [0] = { diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index cfadd974f5ce..ac4af81de3ea 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -164,8 +164,8 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { }, }; -#ifdef CONFIG_USB_SUPPORT -#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O) +#if IS_ENABLED(CONFIG_USB_SUPPORT) +#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) static struct mv_usb_platform_data ttc_usb_pdata = { .vbus = NULL, @@ -178,14 +178,14 @@ static struct mv_usb_platform_data ttc_usb_pdata = { #endif #endif -#ifdef CONFIG_MTD_NAND_PXA3xx +#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx) static struct pxa3xx_nand_platform_data dkb_nand_info = { .enable_arbiter = 1, .num_cs = 1, }; #endif -#ifdef CONFIG_MMP_DISP +#if IS_ENABLED(CONFIG_MMP_DISP) /* path config */ #define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */ #define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */ @@ -275,7 +275,7 @@ static void __init ttc_dkb_init(void) /* on-chip devices */ pxa910_add_uart(1); -#ifdef CONFIG_MTD_NAND_PXA3xx +#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx) pxa910_add_nand(&dkb_nand_info); #endif @@ -285,22 +285,22 @@ static void __init ttc_dkb_init(void) sizeof(struct pxa_gpio_platform_data)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); -#ifdef CONFIG_USB_MV_UDC +#if IS_ENABLED(CONFIG_USB_MV_UDC) pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2o); #endif -#ifdef CONFIG_USB_EHCI_MV_U2O +#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O) pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2oehci); #endif -#ifdef CONFIG_USB_MV_OTG +#if IS_ENABLED(CONFIG_USB_MV_OTG) pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2ootg); #endif -#ifdef CONFIG_MMP_DISP +#if IS_ENABLED(CONFIG_MMP_DISP) add_disp(); #endif } diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 3795ae28a613..e9b45bb58263 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -1,5 +1,5 @@ config ARCH_MOXART - bool "MOXA ART SoC" if ARCH_MULTI_V4T + bool "MOXA ART SoC" if ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE select USE_OF diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index f8f6adfa07c6..fb9762464718 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/completion.h> +#include <linux/module.h> #include <mach/dma.h> #include <mach/msm_iomap.h> @@ -77,6 +78,7 @@ void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { writel((graceful << 31), DMOV_FLUSH0(id)); } +EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd); void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { @@ -115,6 +117,7 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) } spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); } +EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd); struct msm_dmov_exec_cmdptr_cmd { struct msm_dmov_cmd dmov_cmd; diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index adc8971c7266..34e09474636d 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -78,8 +78,10 @@ void __init msm_map_common_io(void) asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ defined(CONFIG_DEBUG_MSM_UART3) +#ifdef CONFIG_MMU debug_ll_addr(&msm_io_desc[size - 1].pfn, &msm_io_desc[size - 1].virtual); +#endif msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn); #endif iotable_init(msm_io_desc, size); diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index f6c9d1d85c14..5b793ebb0a24 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -21,6 +21,7 @@ #include <linux/clocksource.h> #include <linux/dma-mapping.h> #include <linux/mbus.h> +#include <linux/signal.h> #include <linux/slab.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 4b2ed2e8352f..3d24ebf12095 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -63,7 +63,7 @@ static void __init nspire_init(void) nspire_auxdata, NULL); } -static void nspire_restart(char mode, const char *cmd) +static void nspire_restart(enum reboot_mode mode, const char *cmd) { void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K); if (!base) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index fd90cafc2e36..65d2acb31498 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -318,6 +318,9 @@ static void __init h2_init_smc91x(void) static int tps_setup(struct i2c_client *client, void *context) { + if (!IS_BUILTIN(CONFIG_TPS65010)) + return -ENOSYS; + tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE | TPS_VLDO1_3_0V); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index d68909b095f1..3a0262156e93 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -191,6 +191,9 @@ static struct platform_device osk5912_tps_leds = { static int osk_tps_setup(struct i2c_client *client, void *context) { + if (!IS_BUILTIN(CONFIG_TPS65010)) + return -ENOSYS; + /* Set GPIO 1 HIGH to disable VBUS power supply; * OHCI driver powers it up/down as needed. */ diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 40a1ae319610..dbee729e3b6d 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -71,7 +71,11 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; -#ifdef CONFIG_OMAP_32K_TIMER +#ifndef CONFIG_OMAP_32K_TIMER + +static unsigned short enable_dyn_sleep = 0; + +#else static unsigned short enable_dyn_sleep = 1; diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index e022a869bff2..6037a9a01ed5 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -222,6 +222,7 @@ void __init ti81xx_init_irq(void) static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs) { u32 irqnr; + int handled_irq = 0; do { irqnr = readl_relaxed(base_addr + 0x98); @@ -249,8 +250,15 @@ out: if (irqnr) { irqnr = irq_find_mapping(domain, irqnr); handle_IRQ(irqnr, regs); + handled_irq = 1; } } while (irqnr); + + /* If an irq is masked or deasserted while active, we will + * keep ending up here with no irq handled. So remove it from + * the INTC with an ack.*/ + if (!handled_irq) + omap_ack_irq(NULL); } asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3318cae96e7d..1219280bb976 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2541,8 +2541,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = { .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 7bdd22afce69..d4d0fce325c7 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -103,7 +103,7 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { } #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) -#if defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4) extern u16 pm44xx_errata; #define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id)) #else diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 2cb2f06c20f5..14f2cae4109c 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -33,7 +33,6 @@ config MACH_KUROBOX_PRO config MACH_DNS323 bool "D-Link DNS-323" select I2C_BOARDINFO - select PHYLIB help Say 'Y' here if you want your kernel to support the D-Link DNS-323 platform. diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 70974732cbf0..56edeab17b68 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -642,6 +642,8 @@ static void __init dns323_init(void) platform_device_register_simple("dns323c-fan", 0, NULL, 0); /* Register fixup for the PHY LEDs */ + if (!IS_BUILTIN(CONFIG_PHYLIB)) + break; phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK, dns323c_phy_fixup); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 96100dbf5a2e..a280cc42636b 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -53,12 +53,16 @@ config MACH_TAVOREVB select CPU_PXA930 select CPU_PXA935 select PXA3xx + select FB + select FB_PXA config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select CPU_PXA930 select CPU_PXA935 select PXA3xx + select FB + select FB_PXA comment "Third Party Dev Platforms (sorted by vendor name)" @@ -69,8 +73,7 @@ config ARCH_PXA_IDP config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" select ARCOM_PCMCIA - select HAVE_PWM - select I2C_GPIO + select I2C_GPIO if I2C=y select ISA select PXA25x select PXA_HAVE_ISA_IRQS @@ -164,7 +167,6 @@ config MACH_XCEP select MTD_CFI_INTELEXT select MTD_PHYSMAP select PXA25x - select SMC91X help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Tuned for usage in Libera instruments for particle accelerators. @@ -181,6 +183,7 @@ config MACH_TRIZEPS4 config MACH_TRIZEPS4WL bool "Keith und Koep Trizeps4-WL DIMM-Module" depends on TRIZEPS_PXA + select MACH_TRIZEPS4 select PXA27x select TRIZEPS_PCMCIA diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 2f71b3fbd319..43596e0ed051 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -331,7 +331,6 @@ static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = { static void __init balloon3_udc_init(void) { pxa_set_udc_info(&balloon3_udc_info); - platform_device_register(&balloon3_gpio_vbus); } #else static inline void balloon3_udc_init(void) {} diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 8404b24240ea..638b0bb88426 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -20,6 +20,7 @@ #include <asm/mach/arch.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> +#include <asm/io.h> #include <mach/pxa27x.h> #include <mach/colibri.h> diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 2022e092f0ca..db09170e3832 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -56,6 +56,8 @@ #define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000) #define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000) +#define PHYS_OFFSET PLAT_PHYS_OFFSET + #define __phys_to_virt(phys) \ ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \ (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \ diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index d876431d64c0..f2727f2cc661 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -537,7 +537,7 @@ config MACH_AT2440EVB config MACH_MINI2440 bool "MINI2440 development board" - select EEPROM_AT24 + select EEPROM_AT24 if I2C select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT @@ -573,7 +573,7 @@ config MACH_OSIRIS config MACH_OSIRIS_DVS tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" depends on MACH_OSIRIS - select TPS65010 + depends on TPS65010 help Say Y/M here if you want to have dynamic voltage scaling support on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 4adaa4b43ffe..1d77d709ec22 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -484,7 +484,7 @@ struct platform_device s3c2440_device_dma = { }; #endif -#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416) +#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) static struct resource s3c2443_dma_resource[] = { [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0), diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index d9170e9f8ccd..ee7bb2905a99 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -196,7 +196,7 @@ static void gta02_charger_worker(struct work_struct *work) * If the PCF50633 ADC is disabled we fallback to a * 100mA limit for safety. */ - pcf50633_mbc_usb_curlim_set(pcf, 100); + pcf50633_mbc_usb_curlim_set(gta02_pcf, 100); #endif } diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 64f04e6f9c31..3136d86b0d6e 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -86,8 +86,7 @@ config MACH_SMDK6400 bool "SMDK6400" select CPU_S3C6400 select S3C64XX_SETUP_SDHCI - select S3C_DEV_HSMMC - select S3C_DEV_NAND + select S3C_DEV_HSMMC1 help Machine support for the Samsung SMDK6400 diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index 1649c0d1c1b8..ddf65583a5d8 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -55,7 +55,13 @@ static struct irq_grp_save { u32 mask; } eint_grp_save[5]; -static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; +#ifndef CONFIG_SERIAL_SAMSUNG_UARTS +#define SERIAL_SAMSUNG_UARTS 0 +#else +#define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS +#endif + +static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS]; static int s3c64xx_irq_pm_suspend(void) { @@ -66,7 +72,7 @@ static int s3c64xx_irq_pm_suspend(void) s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) + for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++) irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { @@ -87,7 +93,7 @@ static void s3c64xx_irq_pm_resume(void) s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) + for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++) __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 7ccfef227c77..9c00d83f7151 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -401,4 +401,4 @@ static int __init wlf_gf_module_register(void) { return i2c_add_driver(&wlf_gf_module_driver); } -module_init(wlf_gf_module_register); +device_initcall(wlf_gf_module_register); diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 42e14f2e7ca7..f07edc304efb 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -205,6 +205,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size) samsung_pwm_set_platdata(&s5p64x0_pwm_variant); } +#ifdef CONFIG_CPU_S5P6440 void __init s5p6440_map_io(void) { /* initialize any device information early */ @@ -218,7 +219,9 @@ void __init s5p6440_map_io(void) iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); } +#endif +#ifdef CONFIG_CPU_S5P6450 void __init s5p6450_map_io(void) { /* initialize any device information early */ @@ -232,13 +235,14 @@ void __init s5p6450_map_io(void) iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); } +#endif /* * s5p64x0_init_clocks * * register and setup the CPU clocks */ - +#ifdef CONFIG_CPU_S5P6440 void __init s5p6440_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); @@ -248,7 +252,9 @@ void __init s5p6440_init_clocks(int xtal) s5p6440_register_clocks(); s5p6440_setup_clocks(); } +#endif +#ifdef CONFIG_CPU_S5P6450 void __init s5p6450_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); @@ -258,13 +264,14 @@ void __init s5p6450_init_clocks(int xtal) s5p6450_register_clocks(); s5p6450_setup_clocks(); } +#endif /* * s5p64x0_init_irq * * register the CPU interrupts */ - +#ifdef CONFIG_CPU_S5P6440 void __init s5p6440_init_irq(void) { /* S5P6440 supports 2 VIC */ @@ -279,7 +286,9 @@ void __init s5p6440_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } +#endif +#ifdef CONFIG_CPU_S5P6450 void __init s5p6450_init_irq(void) { /* S5P6450 supports only 2 VIC */ @@ -294,6 +303,7 @@ void __init s5p6450_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } +#endif struct bus_type s5p64x0_subsys = { .name = "s5p64x0-core", @@ -321,6 +331,7 @@ int __init s5p64x0_init(void) } /* uart registration process */ +#ifdef CONFIG_CPU_S5P6440 void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) { int uart; @@ -332,11 +343,14 @@ void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } +#endif +#ifdef CONFIG_CPU_S5P6450 void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } +#endif #define eint_offset(irq) ((irq) - IRQ_EINT(0)) diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h index f3a9b43cba4a..cbe7f3d731d0 100644 --- a/arch/arm/mach-s5p64x0/common.h +++ b/arch/arm/mach-s5p64x0/common.h @@ -25,10 +25,10 @@ void s5p6450_register_clocks(void); void s5p6450_setup_clocks(void); void s5p64x0_restart(enum reboot_mode mode, const char *cmd); +extern int s5p64x0_init(void); #ifdef CONFIG_CPU_S5P6440 -extern int s5p64x0_init(void); extern void s5p6440_map_io(void); extern void s5p6440_init_clocks(int xtal); @@ -38,12 +38,10 @@ extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); #define s5p6440_init_clocks NULL #define s5p6440_init_uarts NULL #define s5p6440_map_io NULL -#define s5p64x0_init NULL #endif #ifdef CONFIG_CPU_S5P6450 -extern int s5p64x0_init(void); extern void s5p6450_map_io(void); extern void s5p6450_init_clocks(int xtal); @@ -53,7 +51,6 @@ extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); #define s5p6450_init_clocks NULL #define s5p6450_init_uarts NULL #define s5p6450_map_io NULL -#define s5p64x0_init NULL #endif #endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */ diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c index 3e6f2456ee9d..d5f0fd66b635 100644 --- a/arch/arm/mach-s5p64x0/irq-pm.c +++ b/arch/arm/mach-s5p64x0/irq-pm.c @@ -34,7 +34,9 @@ static struct irq_grp_save { u32 mask; } eint_grp_save[4]; +#ifdef CONFIG_SERIAL_SAMSUNG static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; +#endif static int s5p64x0_irq_pm_suspend(void) { @@ -45,8 +47,10 @@ static int s5p64x0_irq_pm_suspend(void) s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); +#ifdef CONFIG_SERIAL_SAMSUNG for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); +#endif for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4)); @@ -66,8 +70,10 @@ static void s5p64x0_irq_pm_resume(void) s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); +#ifdef CONFIG_SERIAL_SAMSUNG for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); +#endif for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4)); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index caaedafbbf5f..8c3abe521757 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -189,6 +189,7 @@ config MACH_TORBRECK select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_SDHCI + select SAMSUNG_DEV_IDE help Machine support for aESOP Torbreck diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index d9397202d6ec..27b168f121a1 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -1,2 +1,2 @@ obj-$(CONFIG_ARCH_SUNXI) += sunxi.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S deleted file mode 100644 index a10d494fb37b..000000000000 --- a/arch/arm/mach-sunxi/headsmp.S +++ /dev/null @@ -1,9 +0,0 @@ -#include <linux/linkage.h> -#include <linux/init.h> - - .section ".text.head", "ax" - -ENTRY(sun6i_secondary_startup) - msr cpsr_fsxc, #0xd3 - b secondary_startup -ENDPROC(sun6i_secondary_startup) diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 7b141d8342a1..0c7dbce033cc 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -82,7 +82,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu, spin_lock(&cpu_lock); /* Set CPU boot address */ - writel(virt_to_phys(sun6i_secondary_startup), + writel(virt_to_phys(secondary_startup), cpucfg_membase + CPUCFG_PRIVATE0_REG); /* Assert the CPU core in reset */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index ca8ecdee47d8..241622e2fea3 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -264,7 +264,7 @@ config CPU_ARM1026 # SA110 config CPU_SA110 - bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC + bool select CPU_32v3 if ARCH_RPC select CPU_32v4 if !ARCH_RPC select CPU_ABRT_EV4 diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 58645a58d0d8..b57e922f1614 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -427,8 +427,7 @@ comment "Power management" config SAMSUNG_PM_DEBUG bool "S3C2410 PM Suspend debug" - depends on PM - select DEBUG_LL + depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> @@ -445,7 +444,8 @@ config S3C_PM_DEBUG_LED_SMDK config SAMSUNG_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" - depends on PM && CRC32 + depends on PM + select CRC32 help Enable the PM code's memory area checksum over sleep. This option will generate CRCs of all blocks of memory, and store them before diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index aa9511b6914a..a30df396ca34 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -97,7 +97,9 @@ void __init s3c24xx_init_clocks(int xtal) #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) static int nr_uarts __initdata = 0; +#ifdef CONFIG_SERIAL_SAMSUNG_UARTS static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; +#endif /* s3c24xx_init_uartdevs * @@ -112,6 +114,7 @@ void __init s3c24xx_init_uartdevs(char *name, struct s3c24xx_uart_resources *res, struct s3c2410_uartcfg *cfg, int no) { +#ifdef CONFIG_SERIAL_SAMSUNG_UARTS struct platform_device *platdev; struct s3c2410_uartcfg *cfgptr = uart_cfgs; struct s3c24xx_uart_resources *resp; @@ -134,6 +137,7 @@ void __init s3c24xx_init_uartdevs(char *name, } nr_uarts = no; +#endif } void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) |