aboutsummaryrefslogtreecommitdiff
path: root/arch/x86_64
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2007-10-11 11:17:05 +0200
committerThomas Gleixner <tglx@linutronix.de>2007-10-11 11:17:05 +0200
commite8d08eb1b59bf6dda44fffe63cce1250d87a8b56 (patch)
treef73f6b2b8ee0d2c6b06427fdd55f9d29212ca6bc /arch/x86_64
parent987c75d7170686804b404b7f917b9e4b703702ff (diff)
downloadlinux-linaro-stable-e8d08eb1b59bf6dda44fffe63cce1250d87a8b56.tar.gz
x86_64: move kernel/acpi
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86_64')
-rw-r--r--arch/x86_64/kernel/Makefile_642
-rw-r--r--arch/x86_64/kernel/acpi/Makefile5
-rw-r--r--arch/x86_64/kernel/acpi/Makefile_649
-rw-r--r--arch/x86_64/kernel/acpi/sleep_64.c120
-rw-r--r--arch/x86_64/kernel/acpi/wakeup_64.S456
5 files changed, 1 insertions, 591 deletions
diff --git a/arch/x86_64/kernel/Makefile_64 b/arch/x86_64/kernel/Makefile_64
index 3a204cc599d7..120d4e51fd4d 100644
--- a/arch/x86_64/kernel/Makefile_64
+++ b/arch/x86_64/kernel/Makefile_64
@@ -16,7 +16,7 @@ obj-$(CONFIG_X86_MCE) += mce_64.o therm_throt.o
obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o
obj-$(CONFIG_X86_MCE_AMD) += mce_amd_64.o
obj-$(CONFIG_MTRR) += ../../x86/kernel/cpu/mtrr/
-obj-$(CONFIG_ACPI) += acpi/
+obj-$(CONFIG_ACPI) += ../../x86/kernel/acpi/
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
diff --git a/arch/x86_64/kernel/acpi/Makefile b/arch/x86_64/kernel/acpi/Makefile
deleted file mode 100644
index dd4eb7cef2b4..000000000000
--- a/arch/x86_64/kernel/acpi/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/kernel/acpi/Makefile_32
-else
-include ${srctree}/arch/x86_64/kernel/acpi/Makefile_64
-endif
diff --git a/arch/x86_64/kernel/acpi/Makefile_64 b/arch/x86_64/kernel/acpi/Makefile_64
deleted file mode 100644
index fc377c87e0b0..000000000000
--- a/arch/x86_64/kernel/acpi/Makefile_64
+++ /dev/null
@@ -1,9 +0,0 @@
-obj-y := boot.o
-boot-y := ../../../x86/kernel/acpi/boot.o
-obj-$(CONFIG_ACPI_SLEEP) += sleep_64.o wakeup_64.o
-
-ifneq ($(CONFIG_ACPI_PROCESSOR),)
-obj-y += processor.o
-processor-y := ../../../x86/kernel/acpi/processor.o ../../../x86/kernel/acpi/cstate.o
-endif
-
diff --git a/arch/x86_64/kernel/acpi/sleep_64.c b/arch/x86_64/kernel/acpi/sleep_64.c
deleted file mode 100644
index 79475d237071..000000000000
--- a/arch/x86_64/kernel/acpi/sleep_64.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * acpi.c - Architecture-Specific Low-Level ACPI Support
- *
- * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
- * Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
- * Copyright (C) 2002 Andi Kleen, SuSE Labs (x86-64 port)
- * Copyright (C) 2003 Pavel Machek, SuSE Labs
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/bootmem.h>
-#include <linux/acpi.h>
-#include <linux/cpumask.h>
-
-#include <asm/mpspec.h>
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/apicdef.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/tlbflush.h>
-
-/* --------------------------------------------------------------------------
- Low-Level Sleep Support
- -------------------------------------------------------------------------- */
-
-/* address in low memory of the wakeup routine. */
-unsigned long acpi_wakeup_address = 0;
-unsigned long acpi_realmode_flags;
-extern char wakeup_start, wakeup_end;
-
-extern unsigned long acpi_copy_wakeup_routine(unsigned long);
-
-/**
- * acpi_save_state_mem - save kernel state
- *
- * Create an identity mapped page table and copy the wakeup routine to
- * low memory.
- */
-int acpi_save_state_mem(void)
-{
- memcpy((void *)acpi_wakeup_address, &wakeup_start,
- &wakeup_end - &wakeup_start);
- acpi_copy_wakeup_routine(acpi_wakeup_address);
-
- return 0;
-}
-
-/*
- * acpi_restore_state
- */
-void acpi_restore_state_mem(void)
-{
-}
-
-/**
- * acpi_reserve_bootmem - do _very_ early ACPI initialisation
- *
- * We allocate a page in low memory for the wakeup
- * routine for when we come back from a sleep state. The
- * runtime allocator allows specification of <16M pages, but not
- * <1M pages.
- */
-void __init acpi_reserve_bootmem(void)
-{
- acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2);
- if ((&wakeup_end - &wakeup_start) > (PAGE_SIZE*2))
- printk(KERN_CRIT
- "ACPI: Wakeup code way too big, will crash on attempt"
- " to suspend\n");
-}
-
-static int __init acpi_sleep_setup(char *str)
-{
- while ((str != NULL) && (*str != '\0')) {
- if (strncmp(str, "s3_bios", 7) == 0)
- acpi_realmode_flags |= 1;
- if (strncmp(str, "s3_mode", 7) == 0)
- acpi_realmode_flags |= 2;
- if (strncmp(str, "s3_beep", 7) == 0)
- acpi_realmode_flags |= 4;
- str = strchr(str, ',');
- if (str != NULL)
- str += strspn(str, ", \t");
- }
- return 1;
-}
-
-__setup("acpi_sleep=", acpi_sleep_setup);
-
-void acpi_pci_link_exit(void)
-{
-}
diff --git a/arch/x86_64/kernel/acpi/wakeup_64.S b/arch/x86_64/kernel/acpi/wakeup_64.S
deleted file mode 100644
index 8b4357e1efe0..000000000000
--- a/arch/x86_64/kernel/acpi/wakeup_64.S
+++ /dev/null
@@ -1,456 +0,0 @@
-.text
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-
-# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls.
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
- inb $97, %al; \
- outb %al, $0x80; \
- movb $3, %al; \
- outb %al, $97; \
- outb %al, $0x80; \
- movb $-74, %al; \
- outb %al, $67; \
- outb %al, $0x80; \
- movb $-119, %al; \
- outb %al, $66; \
- outb %al, $0x80; \
- movb $15, %al; \
- outb %al, $66;
-
-
-ALIGN
- .align 16
-ENTRY(wakeup_start)
-wakeup_code:
- wakeup_code_start = .
- .code16
-
-# Running in *copy* of this code, somewhere in low 1MB.
-
- movb $0xa1, %al ; outb %al, $0x80
- cli
- cld
- # setup data segment
- movw %cs, %ax
- movw %ax, %ds # Make ds:0 point to wakeup_start
- movw %ax, %ss
-
- # Data segment must be set up before we can see whether to beep.
- testl $4, realmode_flags - wakeup_code
- jz 1f
- BEEP
-1:
-
- # Private stack is needed for ASUS board
- mov $(wakeup_stack - wakeup_code), %sp
-
- pushl $0 # Kill any dangerous flags
- popfl
-
- movl real_magic - wakeup_code, %eax
- cmpl $0x12345678, %eax
- jne bogus_real_magic
-
- call verify_cpu # Verify the cpu supports long
- # mode
- testl %eax, %eax
- jnz no_longmode
-
- testl $1, realmode_flags - wakeup_code
- jz 1f
- lcall $0xc000,$3
- movw %cs, %ax
- movw %ax, %ds # Bios might have played with that
- movw %ax, %ss
-1:
-
- testl $2, realmode_flags - wakeup_code
- jz 1f
- mov video_mode - wakeup_code, %ax
- call mode_set
-1:
-
- movw $0xb800, %ax
- movw %ax,%fs
- movw $0x0e00 + 'L', %fs:(0x10)
-
- movb $0xa2, %al ; outb %al, $0x80
-
- mov %ds, %ax # Find 32bit wakeup_code addr
- movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
- shll $4, %esi
- # Fix up the vectors
- addl %esi, wakeup_32_vector - wakeup_code
- addl %esi, wakeup_long64_vector - wakeup_code
- addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
-
- lidtl %ds:idt_48a - wakeup_code
- lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is
- # appropriate
-
- movl $1, %eax # protected mode (PE) bit
- lmsw %ax # This is it!
- jmp 1f
-1:
-
- ljmpl *(wakeup_32_vector - wakeup_code)
-
- .balign 4
-wakeup_32_vector:
- .long wakeup_32 - wakeup_code
- .word __KERNEL32_CS, 0
-
- .code32
-wakeup_32:
-# Running in this code, but at low address; paging is not yet turned on.
- movb $0xa5, %al ; outb %al, $0x80
-
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
-
- movw $0x0e00 + 'i', %ds:(0xb8012)
- movb $0xa8, %al ; outb %al, $0x80;
-
- /*
- * Prepare for entering 64bits mode
- */
-
- /* Enable PAE */
- xorl %eax, %eax
- btsl $5, %eax
- movl %eax, %cr4
-
- /* Setup early boot stage 4 level pagetables */
- leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax
- movl %eax, %cr3
-
- /* Check if nx is implemented */
- movl $0x80000001, %eax
- cpuid
- movl %edx,%edi
-
- /* Enable Long Mode */
- xorl %eax, %eax
- btsl $_EFER_LME, %eax
-
- /* No Execute supported? */
- btl $20,%edi
- jnc 1f
- btsl $_EFER_NX, %eax
-
- /* Make changes effective */
-1: movl $MSR_EFER, %ecx
- xorl %edx, %edx
- wrmsr
-
- xorl %eax, %eax
- btsl $31, %eax /* Enable paging and in turn activate Long Mode */
- btsl $0, %eax /* Enable protected mode */
-
- /* Make changes effective */
- movl %eax, %cr0
-
- /* At this point:
- CR4.PAE must be 1
- CS.L must be 0
- CR3 must point to PML4
- Next instruction must be a branch
- This must be on identity-mapped page
- */
- /*
- * At this point we're in long mode but in 32bit compatibility mode
- * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
- * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- */
-
- /* Finally jump in 64bit mode */
- ljmp *(wakeup_long64_vector - wakeup_code)(%esi)
-
- .balign 4
-wakeup_long64_vector:
- .long wakeup_long64 - wakeup_code
- .word __KERNEL_CS, 0
-
-.code64
-
- /* Hooray, we are in Long 64-bit mode (but still running in
- * low memory)
- */
-wakeup_long64:
- /*
- * We must switch to a new descriptor in kernel space for the GDT
- * because soon the kernel won't have access anymore to the userspace
- * addresses where we're currently running on. We have to do that here
- * because in 32bit we couldn't load a 64bit linear address.
- */
- lgdt cpu_gdt_descr
-
- movw $0x0e00 + 'n', %ds:(0xb8014)
- movb $0xa9, %al ; outb %al, $0x80
-
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
-
- movw $0x0e00 + 'u', %ds:(0xb8016)
-
- nop
- nop
- movw $__KERNEL_DS, %ax
- movw %ax, %ss
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %fs
- movw %ax, %gs
- movq saved_rsp, %rsp
-
- movw $0x0e00 + 'x', %ds:(0xb8018)
- movq saved_rbx, %rbx
- movq saved_rdi, %rdi
- movq saved_rsi, %rsi
- movq saved_rbp, %rbp
-
- movw $0x0e00 + '!', %ds:(0xb801a)
- movq saved_rip, %rax
- jmp *%rax
-
-.code32
-
- .align 64
-gdta:
- /* Its good to keep gdt in sync with one in trampoline.S */
- .word 0, 0, 0, 0 # dummy
- /* ??? Why I need the accessed bit set in order for this to work? */
- .quad 0x00cf9b000000ffff # __KERNEL32_CS
- .quad 0x00af9b000000ffff # __KERNEL_CS
- .quad 0x00cf93000000ffff # __KERNEL_DS
-
-idt_48a:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
-gdt_48a:
- .word 0x800 # gdt limit=2048,
- # 256 GDT entries
- .long gdta - wakeup_code # gdt base (relocated in later)
-
-real_magic: .quad 0
-video_mode: .quad 0
-realmode_flags: .quad 0
-
-.code16
-bogus_real_magic:
- movb $0xba,%al ; outb %al,$0x80
- jmp bogus_real_magic
-
-.code64
-bogus_64_magic:
- movb $0xb3,%al ; outb %al,$0x80
- jmp bogus_64_magic
-
-.code16
-no_longmode:
- movb $0xbc,%al ; outb %al,$0x80
- jmp no_longmode
-
-#include "../verify_cpu_64.S"
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-.code16
-mode_set:
- movw %ax, %bx
- subb $VIDEO_FIRST_VESA>>8, %bh
- cmpb $2, %bh
- jb check_vesa
-
-setbad:
- clc
- ret
-
-check_vesa:
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
-
-wakeup_stack_begin: # Stack grows down
-
-.org 0xff0
-wakeup_stack: # Just below end of page
-
-.org 0x1000
-ENTRY(wakeup_level4_pgt)
- .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
- .fill 510,8,0
- /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(wakeup_end)
-
-##
-# acpi_copy_wakeup_routine
-#
-# Copy the above routine to low memory.
-#
-# Parameters:
-# %rdi: place to copy wakeup routine to
-#
-# Returned address is location of code in low memory (past data and stack)
-#
- .code64
-ENTRY(acpi_copy_wakeup_routine)
- pushq %rax
- pushq %rdx
-
- movl saved_video_mode, %edx
- movl %edx, video_mode - wakeup_start (,%rdi)
- movl acpi_realmode_flags, %edx
- movl %edx, realmode_flags - wakeup_start (,%rdi)
- movq $0x12345678, real_magic - wakeup_start (,%rdi)
- movq $0x123456789abcdef0, %rdx
- movq %rdx, saved_magic
-
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
-
- # restore the regs we used
- popq %rdx
- popq %rax
-ENTRY(do_suspend_lowlevel_s4bios)
- ret
-
- .align 2
- .p2align 4,,15
-.globl do_suspend_lowlevel
- .type do_suspend_lowlevel,@function
-do_suspend_lowlevel:
-.LFB5:
- subq $8, %rsp
- xorl %eax, %eax
- call save_processor_state
-
- movq %rsp, saved_context_esp(%rip)
- movq %rax, saved_context_eax(%rip)
- movq %rbx, saved_context_ebx(%rip)
- movq %rcx, saved_context_ecx(%rip)
- movq %rdx, saved_context_edx(%rip)
- movq %rbp, saved_context_ebp(%rip)
- movq %rsi, saved_context_esi(%rip)
- movq %rdi, saved_context_edi(%rip)
- movq %r8, saved_context_r08(%rip)
- movq %r9, saved_context_r09(%rip)
- movq %r10, saved_context_r10(%rip)
- movq %r11, saved_context_r11(%rip)
- movq %r12, saved_context_r12(%rip)
- movq %r13, saved_context_r13(%rip)
- movq %r14, saved_context_r14(%rip)
- movq %r15, saved_context_r15(%rip)
- pushfq ; popq saved_context_eflags(%rip)
-
- movq $.L97, saved_rip(%rip)
-
- movq %rsp,saved_rsp
- movq %rbp,saved_rbp
- movq %rbx,saved_rbx
- movq %rdi,saved_rdi
- movq %rsi,saved_rsi
-
- addq $8, %rsp
- movl $3, %edi
- xorl %eax, %eax
- jmp acpi_enter_sleep_state
-.L97:
- .p2align 4,,7
-.L99:
- .align 4
- movl $24, %eax
- movw %ax, %ds
- movq saved_context+58(%rip), %rax
- movq %rax, %cr4
- movq saved_context+50(%rip), %rax
- movq %rax, %cr3
- movq saved_context+42(%rip), %rax
- movq %rax, %cr2
- movq saved_context+34(%rip), %rax
- movq %rax, %cr0
- pushq saved_context_eflags(%rip) ; popfq
- movq saved_context_esp(%rip), %rsp
- movq saved_context_ebp(%rip), %rbp
- movq saved_context_eax(%rip), %rax
- movq saved_context_ebx(%rip), %rbx
- movq saved_context_ecx(%rip), %rcx
- movq saved_context_edx(%rip), %rdx
- movq saved_context_esi(%rip), %rsi
- movq saved_context_edi(%rip), %rdi
- movq saved_context_r08(%rip), %r8
- movq saved_context_r09(%rip), %r9
- movq saved_context_r10(%rip), %r10
- movq saved_context_r11(%rip), %r11
- movq saved_context_r12(%rip), %r12
- movq saved_context_r13(%rip), %r13
- movq saved_context_r14(%rip), %r14
- movq saved_context_r15(%rip), %r15
-
- xorl %eax, %eax
- addq $8, %rsp
- jmp restore_processor_state
-.LFE5:
-.Lfe5:
- .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
-
-.data
-ALIGN
-ENTRY(saved_rbp) .quad 0
-ENTRY(saved_rsi) .quad 0
-ENTRY(saved_rdi) .quad 0
-ENTRY(saved_rbx) .quad 0
-
-ENTRY(saved_rip) .quad 0
-ENTRY(saved_rsp) .quad 0
-
-ENTRY(saved_magic) .quad 0